Beginners

$ cvt 3840 2160 # 3840x2160 59.98 Hz (CVT 8.29M9) hsync: 134.18 kHz; pclk: 712.75 MHz Modeline "3840x2160_60.00" 712.75 3840 4160 4576 5312 2160 2163 2168 2237 -hsync +vsync $ xrandr --output HDMI-1 --mode 3840x2160_60.00 xrandr: Configure crtc 0 failed $ xrandr --verbose Screen 0: minimum 320 x 200, current 3840 x 2160, maximum 7680 x 7680 HDMI-1 connected primary 3840x2160+0+0 (0x41) normal (normal left inverted right x axis y axis) 708mm x 399mm ... CRTC: 0 CRTCs: 0 I would like to setup 4k with a PI400. I found https://docs.armbian.com/User-Guide_Fine-Tuning/ and followed the instructions Did I something wrong, or is this simply…

I am trying to get the RS485 Waveshare CAN hat to communicate with the LePotato. I have Klipper and Mainsail installed which for most would be a good stopping point. I am using CANBUS on all of my printer builds and that requires a CAN hat. I am trying to get this working with this board as i can actually buy these boards. I have a few CAN hats working with Raspberry Pis so i know the original process. Does anyone have a good way to get this all working together? Even a point in the right direction would be a help. I did find a post that claimed to be able to do this but actually trying it as posted resulted with no know vendor as an error.

Hi I just installed Armbian Sid Budgie - rolling, and everything was fine. After the normal "apt update" "apt upgrade" and reboot all application icons in the main menu disappeared (only questionmarks left "?" ). How can i recover/restore them? Altering Budgie Desktop Settings "Icon" or "Built-in Theme" didnt help...

# apt-get update Stary:1 http://ports.ubuntu.com jammy InRelease Stary:2 http://ports.ubuntu.com jammy-security InRelease Stary:3 http://ports.ubuntu.com jammy-updates InRelease Stary:4 http://ports.ubuntu.com jammy-backports InRelease Ign:5 https://apt.armbian.com jammy InRelease Ign:5 https://apt.armbian.com jammy InRelease Ign:5 https://apt.armbian.com jammy InRelease Błąd:5 https://apt.armbian.com jammy InRelease 500 Internal Server Error [IP: 107.175.134.226 443] Czytanie list pakietów... Gotowe W: Nie udało się pobrać https://apt.armbian.com/dists/jammy/InRelease 500 Internal Server Error [IP: 107.175.1…

Hello everyone! I try to install game library for Python 3 (via pip) PyGame. After downloading package, i get message below: pip install pygame Defaulting to user installation because normal site-packages is not writeable Collecting pygame Downloading pygame-2.1.2.tar.gz (10.1 MB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 10.1/10.1 MB 3.5 MB/s eta 0:00:00 Preparing metadata (setup.py) ... error error: subprocess-exited-with-error × python setup.py egg_info did not run successfully. │ exit code: 1 ╰─> [30 lines of output] WARNING, No "Setup" File Exists, Running "buildconfig/config.py" Using UNIX configuration... …

Hello, I'm trying to figure out how to convert the img.xz file into a usable ISO file to boot onto a USB drive. I have no idea, tried using a few converter tools and they don't seem to be doing the job. Anyone know of a way to accomplish this? Thank you.

Texto original em português BR Ola. Tentei gravar uma imagem do armbian para Raspberry Pi num pendrive de 8 gb e testar no Rpi 4 de 2gb que uso exclusivamente para testes e estudo mas o “Raspberry Pi Imager” que tenho no Rpi 4 de 4 gb não permitiu alegando falta de espaço no pendrive. Gravei num SDCard de 16 gb, testei e achei o sistema excelente, então resolvi: 1- Desinstalar alguns aplicativos para diminuir o tamanho. 2- Com consulta na web, usar o comando dd e criar uma nova imagem. 3- Continuando com ajuda da web, diminuir o tamanho da imagem criada anteriormente para eliminar o espaço vazio dessa imagem…

I have been following a project on git hub and none of the commands work like the project as I have Armbian Focal installed. I need Armbian Bionic with Linux opiz2b 4.19.57-sunxi #5.90 SMP or 4.19.127-sunxi. I realise this is from 2019 and may be too old now to do anything with it. Is it possible to still get this? I can only find minimal versions in the archives that are much newer than this. I have to state here that I am a complete novice at this and so really have no idea what I am doing.

I have an orange pi lite, I want to use the lcd ili9341 TFT 320X240 2.8 Inch touch screen, and by header 34 pin and how the installation connections I don't know I need your help. I be very grateful. The OS is "Armbian_22.08.2_Orangepilite_jammy_current_5.15.69_xfce_desktop" And I'm looking for 2.8 inch LCD setup codes on Armbian for Orange Pi Lite!

At https://www.armbian.com/odroid-xu4/ only CLI version is available. Is there a desktop version?

I'm running Armbian on an Orange PI zero and I want to change the default ftp port because I have another device on my network that uses ftp and I want to forward the port. FTP seems switched on by default, I didn't install it so I don't know which ftp program it is.

Hi, I just started working with orangepI, I bought an orangepi one module. I have a question is there any possibility to disable and enable HDMI display port of orange pI one. Regards, Adnan

As the title suggests I would like to know, if it is possible to use the Armbian designed for the Allwinner H6 (Orange Pi Lite 2) for the Allwinner H616 (Orange Pi Zero 2). I assume the differences between them might not be that big. Is it useable, if not, why is this the case. What could happen when I try to use it with the H616? Thank you very much in advance Ferry

Hi, i'd like to know if it's possible to disable the first run wizard (set up of root password, timezone locale etc) via armbian build framework? I have build my own image, and set the parameter DEST_LANG="de_DE.UTF-8" , but still the wizard shows up after flashing and asks me for the locale. Can i do this type of customization in the customize-image.sh? (sorry if that's a too stupid or obvious question). This is my customize-image.sh script (i have truncated it). #!/bin/bash # arguments: $RELEASE $LINUXFAMILY $BOARD $BUILD_DESKTOP # # This is the image customization script # NOTE: It is copied to /tmp directory inside the image # and executed…

Hello everybody, I am using Armbian Bullseye image on an ODROID-HC2 and I moved the root filesystem to an encrypted SATA drive. During boot in UART / USB serial console I see that two services fail to start: Resets System Activity Logs and Haveged [...] [ OK ] Reached target Sockets. Starting Armbian hardware monitoring... Starting Armbian hardware optimization... [ OK ] Started RPC bind portmap service. [ OK ] Finished Armbian hardware monitoring. [ OK ] Reached target Remote File Systems (Pre). [ OK ] Reached target Remote File Systems. [ OK ] Reached target RPC Port Mapper. [ OK ] Stopped Entropy Daemon based on the HA…

Hello folks, This is my first post to the forum. I cannot seem to get my LCD 2004 to work on my Le Potato AML-S905X-CC I went back and forth a few times in armbian-config to enable/disable various items, but as it stands right now, I just have i2cA enabled. The address of my LCD 2004 is at hex 0x27, and I am using GPIO pins 3 & 5 for SDA and SCL respectively, but it doesn't show up in i2cdetect -y 0: root@lepotato:~# i2cdetect -y 0 0 1 2 3 4 5 6 7 8 9 a b c d e f 00: -- -- -- -- -- -- -- -- 10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -…

On Armbian Buster, rockchip (rock64), kernel 5.16.69. This was also happening on the latest backported version of 5.10, I think 5.10.72? I tried upgrading to fix it to no avail. I have a couple 8TB HDDs that I use as backups. All I did was reformat one of them as btrfs and start copying the data back over from the other (still EXT4). I tried rsync and simple cp. Without fail, a few minutes into the operation, the copy operation will hang indefinitely, and all open terminals receive these kernel messages: Message from syslogd@localhost at Oct 1 16:59:57 ... kernel:[ 339.539365] Internal error: Oops: 96000004 [#1] PREEMPT SMP Message from syslogd@localho…

Hi, I have a script in systemd which doesn't start automatically at boot using Orange PI PC+ under Armbian 22.02.01 Focal. I can see the script is read in the boot text. But my program doesn't run. [OK] Started WiProbe Gateway. It seems the that the script is executed, but stops somewhere in the script??? The program is in /root/Gateway/Bundle SCRIPT Gateway.service [Unit] Description=WiProbe Gateway After=netwok.target StartLimitIntervalSec=0 [Service] Type=simple WorkingDirectory=/root/Gateway/Bundle Restart=always RestartSec=1 User=root ExecStart=/root/Gateway/Gateway ExecRe…

I was trying to get my Fritz!WLAN AC860 to work which requires Mediatek drivers/firmware. I noticed that the various kernel modules (mt76x2u, mt76x2_common, mt76x02_usb, mt76_usb, mt76x02_lib and mt76) were already available through the armbian-firmware package, but the also required mt7662_rom_patch.bin was not. The Mediatek modules plus mt7662_rom_patch.bin are available in the firmware-linux-nonfree package, but this will only install properly after first removing the armbian-firmware package. Everything seems to work fine now (I'm using my OdroidC4 as a headless server), but I have this nagging feeling that one day I'll need to us…

Hi, Armbian users. I wonder is it safe to run `do-release-upgrade` to upgrade my Armbian + Ubuntu system from `20.04` to `22.04`? ``` New release '22.04.1 LTS' available. Run 'do-release-upgrade' to upgrade to it. ```

Hi, I need to install kernel headers to build a wifi driver. Using armbian-config to install the headers does not work ... After much searching came across a logical suggestion - i.e. install the 'linux-headers-current-sunxi' package ... When I install that package (on a fresh 22.08.1install), the package installed is for 22.05.03 ... which is, er, the wrong version? Where do I find the headers for 22.08.1 ? Many thanks!

Hello, I am using armbian on banana pi m2 zero uname -a Linux bananapim2zero 5.16.11-sunxi #22.02.1 SMP Sun Feb 27 09:17:03 UTC 2022 armv7l armv7l armv7l GNU/Linux I want to rebuild kernel, but i cannot find kernel source. Where I can find it? This code from https://wvthoog.nl/nanopi-ov5640-camera/#OV5640_sensor doesn`t work sudo apt update sudo apt upgrade sudo apt install build-essential uname -r # check your current kernel version sudo apt install linux-source-<your current kernel version> In my case: sudo apt install linux-source-5.8.6-current-sunxi cd /usr/src sudo tar xf linux-source-5.8.6-sunxi.tar.xz

Dear All, I am using Jammy with kernel 5.18 on hold, but yesterday I noticed very important updates that were kept back because the kernel is locked, such s: armbian-bsp-cli-odroidhca armbian-firmware linux-dtb-edge-meson64 linux-headers-edge-meson64 linux-image-edge-meson64 linux-u-boot-odroidhc4-edge I wonder if is worth to update or if I had better to stick with my current setup, where my main feature — ZFS — is working. What's your recommendations? Thanks in advance! F.

Hello, I saw from other posts that is possible to enable HWDecode for Video on the H3 of OrangePi PC O would love to make mpv or cvlc work with hwaccel People mention to apply the patches of LibreELEC on the Armbian build. But i dont have the knowhow to do so. Does anyone already have done this? any links, tips, guides, tutorials that i can follow Ty in advance and sorry for grammar

Hi, I am using Rock Pi 4B and want to be able to turn the system on after sleep (suspend/hibernate or any other state that would allow it). Previously, I have used MRAA library to set an interrupt, and called system("shutdown now") inside interrupt code. I did it according to the following post and according to the MRAA examples. I wrote a shell script, which executes the MRAA program. Shell script, in its turn, is called by a service on a start-up. So, with this method I was able to shutdown the system, but I cannot get out of this state via button press. I researched few posts, such as: 1, 2, and 3. It looks like either I have to modify …

Hi, as I would like to replace my old Banana Pi M1, I wonder which SoC I should use. I'd like to spend maximum 100€. What's the newest supported SoC which is right now available? Already orderes a Raspberry Pi 4 Gb 9 month ago....but still no idea when it'll be delivered. As I really like ARMbian and OpenMediaVault, I'd like to stick with it. I'd like to have at least a quadcore, gigabit-lan and 2-4GB ram.

Hi everyone I Install the latest version of Armbian Debian for the TinkerBoard S but at the beginning I have the problem of seeing that the image is always distorted, it is similar to having interference, it had not happened before with other operating systems. It also sometimes turns off meaninglessly or the mouse stops working.

there is a problem using tvheadend package on os armbian bullseye 22.08. if you download the tvheadend package, then after installation you return back to the pseudo-graphical shell and that's it. according to the video from YouTube, people could enter the administrator login and password for authorization in the web interface. but on orange pi pc with os armbian it does not work and without knowing the login and password it is stupidly impossible to get into the web interface. help solve the problem

Is anyone prepared to sell me a 16Gb micro SD card preloaded with Raspbian O/S for Banana Pi BPi-M2 Berry board. I have been trying for some weeks now to install this O/S but I just can't get Phoenix Card to work. I have had lots of advice but none of it works. Can anyone help. Regards, robjim418@gmail.com

Cross-posting from the Radxa community, because I've not had much luck getting replies over there, and hoping this forum is more active. I’m in the process of porting a VISCA/NDI camera controller from Raspberry Pi to run on Rock Pi (4B+ version 1.73), and I’m running into some serious GPIO hardware failures that I don’t quite know how to deal with. As a starting point, I took a pre-built collection of LEDs and disconnected them from a working Raspberry Pi setup and connected them to the Rock Pi. They all worked fine when driving them from the Raspberry Pi, so I’m reasonably certain that the problems are specific to the hardware or drivers on the Rock Pi …

Is there an easy (as in a script or utility) way to install Armbian on the eMMC of a Le Potato? I dug through the forum and all the information was old and it seemed rather painful.

I do not have petitboot installed. I ran the Armbian buster with OMV5 for over a year. I decided to make a clean install and booted Armbian bullseye 11. I changed hostname and rebooted (curiously reboot doesn't reboot the hc4, why?). I used armbian-config to install OMV. Installation completed, brought me back to armbian-config and prompted to reboot. I hit reboot (then was forced to power cycle as hc4 won't come back to life after a soft-boot?). Note that I was able to power cycle and get a good boot BEFORE omv installed but not after. At that point Odroid hc4 never comes back online. I've been through this 3 times today. I gave it as…

Hi, I built a second nas from rockpi4 and as I used the 12V plug to power the tower, I thought, I could use an old pc power supply to drive both. But when I start both nas from the same power supply, both will crash. Any idea, how I could avoid that crash and stil use only one power supply? Maybe add some electronic components?

While using my Quartz64A I am getting cursor flickering while moving the cursor. While I move the cursor everything else just stops and only continues after the cursor stops moving. glxinfo is reporting mesa is able to find Mali G52 but I am having a feeling the GPU is not helping the desktop rendering here.

Hello! Trying to build legacy buster desktop image for orangePi4 ends with error Processing triggers for libc-bin (2.28-10+deb10u1) ... Processing triggers for systemd (241-7~deb10u8) ... Processing triggers for dbus (1.12.20-0+deb10u1) ... [ o.k. ] Checking MD5 sum of installed packages [ debsums ] [ error ] ERROR in function create_rootfs_cache [ main.sh:588 -> main.sh:549 -> debootstrap.sh:59 -> debootstrap.sh:343 -> general.sh:0 ] [ error ] MD5 sums check of installed packages failed [ o.k. ] Process terminated [ error ] unmount_on_exit() called! [ main.sh:1 -> image-helpers.sh:0 ] [ o.k. ] Unmounting [ /home/lord/build/.tmp/…

hi im newbie here, i have small question ,sorry if so simple or silly. im confused about size block on armbian system (default system archive) if a make df , the system says 1 kb . Filesystem 1K-blocks Used Available Use% Mounted on tmpfs 102300 7152 95148 7% /run /dev/mmcblk0p1 59601388 1120660 57840424 2% / tmpfs 511492 0 511492 0% /dev/shm tmpfs 5120 4 5116 1% /run/lock tmpfs 511492 0 511492 0% /tmp /dev/zram1 47960 7412 36964 17% /var/log tmpfs 102296 0 102296 0% /run/user/1000 but, if im …

Hello everyone, I need to install Armbian on a Pine64 Quartz64 model A but I don't know where to start. Can any of you give me a hand? A thousand thanks!

Hi everyone, I'm trying to compile an image for Orange Pi One with the default config for desktop - but I'm running on box86 error, unable to locate box86 then the process terminates. Do I need to install it first from here >>> https://github.com/ptitSeb/box86 before I can make a successful image compile? - I also tried compiling just the kernel and my virtual box setup works just fine outputting compiled deb files.

it does not exit the location screen. it doesn't go into anything. can anybody help me.

I would like to use the uart of the orangepi zero 2 for an application. It esists for example /dev/ttyS5. But unfortunately the communication does not work. When I connect minicom to this port and short the two pins 8 and 10, I wanted to see the characters that are sent. Minicom can be connected (minicom -D /dev/ttyS5). But the characters are not mirrored. Do I need to enable the UART before? How to do this? The orangepi-config program does not exist on the system. The system reports after the login with: Welcome to Orange Pi 3.0.6 Bullseye with Linux 5.16.17-sun50iw9 Thank you for your thoughts.

Hi guys I's possible to convert .bin file to text file. Could someone help me to do that. thank you

Hi All, On an Odroid N2+ board, I have tried to install ZFS following different suggestions I found on the web. None of them worked so far. I tried: https://forum.armbian.com/topic/19952-cant-install-kernel-headers-via-armbian-config/ https://forum.armbian.com/topic/18790-odroidhc4-with-5139-meson64-missing-zfs-modules/ https://forum.armbian.com/topic/17337-zfs-just-works-now-on-armbian-2-step-instructions-if-you-are-thick-like-me/ I installed both Armbian 22.05 Bullseye 5.10.110-meson64 first, and then Jammy 5.17. Could someone please help me? Thanks 🙂

Good day, I hope this email finds you well. I would like to create a custom animated screensaver and splashscreen on my Linux Armbian. I am current running the Jammy KDE Plasma version. Can you please guide me on how I can get this right and what I need to do to achieve this? I am also experiencing some graphical issues where some of the words disappear? Is there a fix for this? I am also trying to access the internet through wifi but it does not allow me to connect to my network. Any advice on how to get this right? Looking forward to hearing from you.

Hi all; Recently i installed a armbian and seems to be all ok less the global memory detection. I don't know by but the system have only detect 256 Mb. from total amount of 512Mb. (/proc/meminfo). Of course, i proved another OS and detet all memory so i know that's not a hardware problem. Is there any trick on kernel or something misconfigurated?

Hi guy's urgent help needed, I have banana pi m2 zero and I need the hdmi Waveshare 7inch LCD settings help. I have tried to change the config file also dts file, none of those worked. Tried to build with hdmi lcd (internet help) - none Could any one point out what is need to be done to get it work? thank you

Hello, I have just updated the latest kernel available on my sbc orangepi+2e with the armbian-config tool and after that it no longer boots. After plugging in the serial port it complains "## Executing script at 44000000 Wrong Ramdisk Image Format Ramdisk image is corrupt or invalid". How can I fix it without having to reinstall everything? I run home-assistant and all the data is on emmc. U-Boot 2019.04-armbian (Jul 15 2019 - 18:03:30 +0200) Allwinner Technology CPU: Allwinner H3 (SUN8I 1680) Model: …

Hi. I'm Using Armbian 21.05.6 Buster. After some firmware update my Odroid freezes frequently. Trying to fix this issue I found root@nextcloudpi:~# dmesg (cut) [ 18.997342] swapon: swapfile has holes Relevant further information could be: root@nextcloudpi:~# zramctl NAME ALGORITHM DISKSIZE DATA COMPR TOTAL STREAMS MOUNTPOINT /dev/zram1 lz4hc 50M 1.2M 168.7K 636K 8 /var/log /dev/zram0 lzo 998M 4K 81B 12K 8 [SWAP] root@nextcloudpi:~# swapon --show NAME TYPE SIZE USED PRIO /dev/zram0 partition 998M 0B 5 root@nextcloudpi:~# swapon --show NAME TYP…

Hello all I have a many questions, but I will start off with the 2 I need to be helped on. 1: The Le Potato needs butter and sour cream. HAHA I has to say it... I am running the newest flavor of Armbian created in the last few weeks (Armbian 22.08 Jammy XFCE Kernel 5.10.y, Size: 1263Mb, Updated: Aug 30, 2022). I am new on to a non Pi bd so forgive me on the differences. After loading imaging and updating (or not) the board any time I try to do a full shutdown, all it does is reboot. After I get this to work I will work on my other issue below. 2: I would like to use this as a replacement for Pi 3A+ on a remote solar powered weather station …

Hello everyone, I am beginner to ARMBIAN OS installed on Rock 3A ( 4/64 GB) board. Version of the Armbian OS is "Armbian_22.08.1_Rock-3a_jammy_edge_5.19.5_xfce_desktop.img.xz" and I'm trying to install basic radxa packages such as mraa, PoE function, etc. But I don't know how to and where to update the radxa repository on armbian os. Still I try to update the repository on /etc/apt/source.list.d/armbian.list , but while updating (apt update) it's throwing an error like "An error occurred during the signature verification". Please help me to solve this issue. Note : The motive is I have to work with PoE hat, for that mraa packages are essentials. And also I nee…

Hello, I'm trying to use i2c (i2c1, i2c4) with fresh installed image "Armbian_21.05.1_Tinkerboard_focal_current_5.10.34.img.xz". The related overlays seems to be enabled by default: cat /boot/armbianEnv.txt verbosity=1 bootlogo=false overlay_prefix=rockchip overlays=i2c1 i2c4 spi2 spidev2 uart1 uart2 rootdev=UUID=68be20e3-93fc-4c59-95e1-0c534586d070 rootfstype=ext4 usbstoragequirks=0x2537:0x1066:u,0x2537:0x1068:u i2c is enabled by default: i2cdetect -l i2c-2 i2c rk3x-i2c I2C adapter i2c-0 i2c rk3x-i2c I2C adapter i2c-5 i2c rk3x-i2c I2C adapter …

I have just downloaded desktop Armbian 22.08 Jammy XFCE on my Odroid-C2 and it works fine on a 1080p monitor. I need it to work on a different monitor though so I have added the following lines to /boot/armbianEnv.txt display_autodetect=false hdmimode=1680x1050p60hz and added hdmitx=forcergb in the bootargs (which I copy/pasted from /boot/boot.cmd) but it has no effect. My monitor works with these parameters on Hardkernels Ubuntu 18.04 image. What else do I need to do?

A month or two back, when I installed Armbian, I had to revert to an older kernel, 5.10.63-rockchip64, which has known vulnerabilities. I needed to be able to boot off of a USB 3 HDD, so I had to revert it and hold updates for the kernel/kernel headers. These are the commands I used to revert to the older kernel: sudo apt install linux-dtb-current-rockchip64=21.08.2 linux-image-current-rockchip64=21.08.2 sudo apt-mark hold linux-dtb-current-rockchip64 linux-image-current-rockchip64 Fast forward to today, where the issue with USB 3 has been apparently resolved in the latest kernel, I tried to unhold the kernel/kernel header updates, that seemed to work. …

Is there a command to load this splash screen that shows when I open a new session? Also is there a way I can show the storage availability/temperature for the second hard drive? I think the current setting only shows information for the drive on /sda but i need info for drive on /sdb

root@nanopct4:/boot/overlay-user# armbian-add-overlay lcd-mipi-opi4.dts Armbian is not installed properly. Missing armbian-release or armbianEnv.txt I found 22.08 using extlinux.conf instead of the legacy set of boot.scr + text files. That will miss overlay function when using extlinux ?

I wonder what the best desktop replacement might be. I'm in need for a stable and secure desktop replacement that is energy saving and capable of dooing office work, browsing the web and even playback videos from youtube and prime video. 4K isn't necessary but I want at least 720p or 1080 fullscreen. If possible: No internal spi / eeprom / flash memory. I want the firmware to be loaded from a USB Storage / SD Card that gets hardware write protected after the first setup. Like a live distro from dvd so that there is no risk of getting infected by rootkit / bad firmware ever. Most current gen SoC offer built in flash memory. Older ones like Rock64, Pi3 and …

is there a chance that I could find older version of armbian for my sbc (orange pi pc plus)? in this case I need armbian buster for my sbc

ix.io/48Zd I've simply installed Armbian 22.05 Jammy Kernel 5.15.y, Size: 307Mb, Updated: Jul 2, 2022 on my aforementioned subject title / tagged OrangePiPCPlus. I can't seem to get hassio to install with armbian-config and then with Software > Softy it doesn't seem like the image for homeassistant io gets pulled, because when I check with docker images list or docker ps I don't get anything returned. Plus the checkbox isn't checked in Soft for hassio when I go back. What could I be doing wrong here? I did install Docker first, anyone have any tips?

Hi, I installed a fresh Armbian_22.05.4_Rockpi-4a_sid_edge_5.18.0 first on SD-card, then I used nand-sata-install to copy system to emmc. After that I rebooted and set up the nas (rockpi-4a with 4 ssd-drives). I already used ssh remote shell to perform apt dist-upgrade and copying of about 6TB ... When all setup was finished, I shutdown the system, closed the tower and restarted again. On that restart, the network came up without inet-address. ifconfig showed eth0 and l0, but eth0 had a mac-address (not the one, I configured in armbianEnv.txt) but no ip-address. Here are some lines from syslog: Aug 28 15:57:01 mynas NetworkManager[1659…

Hello, I used to set dram freq at 132mhz on previous kernels, how can I do it now ? Linux nanopineo 5.15.48-sunxi #22.05.3 SMP Wed Jun 22 07:35:10 UTC 2022 armv7l armv7l armv7l GNU/Linux

Hi, I installed Armbian 22.05.3 on a OrangePi Zero. There is a huge file in the root directory of the microsd card named qemu_fstype_20220704-070826_11972.core owned by root that is almost the size of the card. What is this file?

I'm having trouble connecting my Android phone when it doesn't automatically connect and recognize. Is there a way to fix it or is there any documentation? Since it has so many different versions, I tried it and it still failed automatically. Sincerely thank you.

Hello, I've been just started using Armbian on my Tinker Board 2s and i'm facing problem that i dont get any output on my acer portable monitor using usb type - c. But when i use tinker os i get output on my acer portable monitor. Please help

On the AML-S905X-CC (Le Potato) how does one use the gpio uart headers. In dmesg I see that ttyAML0 is a serial port. Is ttyAML0 the gpio uart headers?

Hello, i recently recieved my orange pi 4 lts and the idea was to use it a both media server and SmartTV features replacement. Sadly, using browsers to play Kinopoisk (russian streaming service) was a flop, no browser i tried can use or implement Wadevine decently. I tried Vivaldi, Firefox and Chromium/ How do you it with Netflix, if you do it at all. Any advice, what can i do?

Hi there, I've recently flashed armbian on my sd card for my odroid c4. At some point I may have restarted it and it is no longer booting. When I plug in the odroid it is stuck on the boot screen with the spinning symbol. I used the latest desktop version armbian jammy when setting up. I am unable to flash over this on the sd card and it is not able to be formatted by windows. I tried diskpart etc but nothing seems to be working. Can anyone help me out? Thanks -R

I am a Linux-Newbee myself but in the DOS/Windows-world I was programmer and admin. But my friend is a total user-only (he is physiotherapist an GOOD in that) so I ended up being his computerman. We both have the rockPi 4 A (no WLAN) with Armbian XFCE. He also has some pad with Android. Everything was good for about a year. He is using Telegram a lot. On the pad he had several messages about a Telegram update, one click, done. On the RockPi with Armbian instead he had messages about using an outdated version of Telegram which soon will cease functioning. No Updates offered. He installed Telegram new which worked, but after a restart he had the old versio…

I'm trying to build Armbian desktop image in 64-bit uBuntu and it does not complete. When I build the server it completed nicely no problems. Displaying message: Adding APT Source deb [signed-by=/usr/share/keyrings/githubcli.gpg] http://cli.github.com/packages stable main Displaying message: Adding GPG Key /home/hydra/armbian/config/desktop/_all_distributions/appgroups/programming/sources/apt/githubcli.gpg Displaying message: Updating package list bullseye info Displaying message: Upgrading base packages Armbian info Displaying message: Installing the main packages for Armbian info Displaying message: Installing the desktop packages for Armbian info Disp…

Hi there, I need to install below libraries on my orange pi lite, on a virtual environment tensorflow 2 keras numpy pandas OrangePi.GPIO does anyone have a armbian image including all these libraries pre-installed. because everytime I try to do it, I face lots of odd errors, mostly for installing tensorflow 2, and installing anyone of libraries on virtual environment.

Hello, I have a usb wifi device which works well on nano pi neo 3.4.113-sun8i. I update to the latest ditribution 5.15.48-sunxi jammy, then I rebuild kernel drivers but now it only work on a cold boot and when I hot plug the adapter. On a warm boot the adapter with lsusb is ok but nmcli can't find the device. I have the same problem with another usb wifi adapter (lsmod is ok, but stil not working with "rmmod 8821cu" and then "modprobe 8821cu")

Hi all, SPI has been enabled into /boot/armbianEnv.txt with: overlays=spi-spidev param_spidev_spi_bus=0 Nothing works knowing that the wiring between device and BPI has been checked more than 3 time. How can I check that SPI0 works well? where can I check that dtd file is correctly loaded? What are created files on fs when the spi port is correctly enabled? ==> Armbian 21.05.1 Focal with Linux 5.15.48-sunxi Many thanks

Ok so I’m using a orange pi 3lts and when I try connecting to a Wi-Fi network it fails so to find the problem I ran armbianmonitor -u and it said network/firewall problem detected not able to upload debug info and I tried to use armbian config to fix this but it didn’t work how do if fix this?

After trying different distro for the BPI M2 Zero, I installed Armbian, and it works great with a standard 16:9 screen. Now I would like to use a bar LCD (Waveshare 7.9 inches); but the setup instructions are for RPI, not for Armbian, so I am not sure how you set up a screen that is not default (And I exclude that I can just plug in the screen and it will magically work. I am not using X interface since the BPI is quite slow, so I am in terminal. Thanks

Hi, I owe a fritzbox 5530 which is configured for both IPv6 and IPv4. My armbian ( debian 11 ) SBC ( neo2 running kernel 5.19.1 ) shows: root@armbian:~# ip a |grep inet6 inet6 ::1/128 scope host inet6 2a02:a45f:b977:1:3383:1a4e:38e2:733f/128 scope global dynamic noprefixroute inet6 2a02:a45f:b977:1:a05d:7fc7:a5d0:d647/64 scope global dynamic noprefixroute inet6 fe80::3383:1a4e:38e2:733f/64 scope link noprefixroute However I am unable to resolve the IPv6 address while for another debian box it is working fine: root@armbian:~# ping debian.fritz.box PING debian.fritz.box(debian.fritz.box (2a02:a45f:b977:1:21d:e…

Hello, I'll like to build my own kernel, mostly to learn more about Linux on ARM. The device I have is RK3399 based (Nanopi M4v2). Can I use the mainline kernel or are some parches needed? Where can I get the correct DTS? Is there any guide on how to do this? I'm not unfamiliar on how to build a custom kernel, but that was on x86/x64. ARM is a very different animal.

I'm looking to update my current Armbian File server (orange pi plus). The main reason is to gain USB3 for faster file serving, particularly rsync. I have little need for most of the features available (bluetooth,wifi,gpio,audio,hdmi), just a stable, low-cost, box that has usb3/gigabit ethernet and doesn't need a fan. I was thinking of an orange pi 3 lts for this purpose-- it seems to run armbian, and it won't break the bank at 54usd shipped with case + power supply. Do you see any problems with this choice or have alternative choices?

Hello everyone, I need to run below code so I can convert speech to text on my OPi Lite. ////////////// import speech_recognition as sr rec = sr.Recognizer() with sr.Microphone() as source: audio = rec.record(source, duration=15) print("Converting...") output_text = rec.recognize_google(audio) print(output_text) ////////////// speech recognition is installed, but everytime I try to run below code, I am getting these odd errors. I tried several different ways, wonder if someone have had same issue and had fixed it. ///Error//// ALSA lib pcm.c:2664snd_pcm_open_noupdate) Unknown PCM cards.pcm.front ALS…

Good day, I am failing to get SPI working on Tinkerboard REV1.2 with a Nordic nrf24L01+ transceiver. Software as follows: gordon@tinkerboard:~/rf24libs/RF24/examples_linux/extra$ uname -a Linux tinkerboard 5.10.21-rockchip #21.02.3 SMP PREEMPT Tue Mar 9 09:50:34 CET 2021 armv7l armv7l armv7l GNU/Linux gordon@tinkerboard:~/rf24libs/RF24/examples_linux/extra$ cat /etc/lsb-release DISTRIB_ID=Ubuntu DISTRIB_RELEASE=20.04 DISTRIB_CODENAME=focal DISTRIB_DESCRIPTION="Ubuntu 20.04.2 LTS" Hardware is attached to spi2, CE for example as below. nrf24 CE pin 3 → spi2-csl gpio8-6 (251) = GPA3_SPI2CSN1 pin 26.…

Hello! I met next problem: I need configure UART communication with baud rate 1 Mb/s (or 2 or 3). But internal clock of the bus is 1.5 MHz, and if i try to communicate with 1 Mb/s, error is too big. Is it possible somehow change internal clock of the uart? Or maybe any other possibilities how to configure such communication ? Or maybe you know any models with higher internal clock of the bus (Like on 6.5 MHz on raspberry pi 4, for example) ? Now one section is equal to 1.333 microseconds, but it should be 1.0 mcs. I found same topic at this forum, but it's no solution there: Thank you and have a good day

That's all, really. I appreciate the amount and quality of work that the leaders here generously share with the community. I donated an amount that would buy 6 bottles of my preferred local brew, hoping that the project's accountants will allow at least that tiny drop in the total donation pool to be used to celebrate a little. It's well-earned!

a while back I created my own Armbian environment for the Orange PI Pc that uses Xstart to run a custom .exe I created. the Program uses Uart to communicate with an external Pic chip. the program has been running well and have not had any problems with it. I created a .img of the environment and have been disabusing copies. however recently ( about 2 months after ) I have been told that some of them have been crashing and digging into it I noticed is was Uart communication failing. A temporary solution has been replacing the SD card with a new one but this does not fix the issue of this happening in the first place. I have attached the Uboot of both the failing program an…

Hi. I need the serial number of the CPU of the orange Pi boards. I see it is in the file /proc/cpuinfo I need another place that is not file based as the cpuinfo file can be spoofed. Is there a way to read it directly from a register?

Hi everyone, After migrating to a nvme ssd using the recommended official adapters, I've run into this issue. (Been really frustrating not been able to boot reliably, replug it until it works) Before I migrated, if I went fdisk -l it would start flashing and always show up. It's only when booting, it seems to be unable to boot/stay on most of the time. 1) I put power into pi. 2) The ssd blinks, if it stops blinking, it didn't boot. If it keeps blinking success. Is there a way to delay mounting the ssd or better debug this issue?

The internet is full of reports, that USB devices get disconnected at random after some time. Camera or disc-drives, keyboards etc. For me it was a GPS device. The solution is described here https://hamwaves.com/usb.autosuspend/en/ and here https://www.kernel.org/doc/Documentation/usb/power-management.txt

Hi ! I recently got an Odroid HC4. I am following the guide (https://www.armbian.com/odroid-hc4/) to install Armbian 22.05 Bullseye on it. But I have some problems and I dont know how to do.. So my problems is actually this part : "Create a file in /etc/fancontrol with the following content: INTERVAL=10 DEVPATH=hwmon0=devices/virtual/thermal/thermal_zone0 hwmon2=devices/platform/pwm-fan DEVNAME=hwmon0=cpu_thermal hwmon2=pwmfan FCTEMPS=hwmon2/pwm1=hwmon0/temp1_input FCFANS= hwmon2/pwm1=hwmon2/fan1_input MINTEMP=hwmon2/pwm1=50 MAXTEMP=hwmon2/pwm1=60 MINSTART=hwmon2/pwm1=20 MINSTOP=h…

Hi, armbian failed to boot from nfs. It's mandatory to burn armbian on sdcard and do a first boot? I compiled uboot for orange pi pc. Then i burned uboot on a sdcard. I am able to boot the kernel and i show the nfs mount but it fail without an error message after [ OK ] Started Rule-based Manager for Device Events and Files. I mounted the nfs folder from another computer as nfs3 fs and i am able to write on it. But there are no user folder on the /home/ here the full boot log Hit any key to stop autoboot: 0 switch to partitions #0, OK mmc0 is current device Device 0: unknown device ethernet@1c300…

Hi there, I have too many SBCs running Armbian with very recent kernels (even two Raspberry Pi 3B), and I love the consistency of my herd. I will change job next month, and I will at last be able to have a Linux machine as my daily driver... The thing is, I will need Windows too for video editing so that I need to keep it available when needed. I was thinking of Manjaro or Linux Mint for the freshness of their kernels (as the laptop hardware is pretty recent), but I gave a try yesterday at Armbian on x86_64, and it went almost well. I did not go as well as @NicoD's attempt in his latest video, but it is encouraging anyhow. So... Is there anything like…

I have a wifi provider that I can connect to with nmtui. If I connect another interface (usb wifi) ping www.google.com times out until I delete and recreate the wifi connection. Fresh install, no changes beyond new hostname and one new user. ETA same result if connect/disconnect ethernet

Please Help me How to Edit File /sys/firmware/devicetree/base/model ? ARMBIAN 5.88 user-built Ubuntu 18.04.2 LTS 5.1.0-aml-s905

I'm thinking of buying a WindowsCE/Android Netbook that uses a WM8650 processor and want to install Linux on it but the only images I could find were 10 years old ;/ If a stock image won't work then how hard would it be to compile it for the WM8650? I'm a complete newbie so please explain as if I'm a kindergarden dropout :)

Hello, This may seem simple for you, and I feel stupid for asking, but I'm not sure how to install the driver provided by KeeTouch, the touch screen provider, on my OrangePi One. This is the driver provided, but there is no instruction on how to install it. https://keetouch.eu/files/drivers/saw/linux/linuxupdd4.1.11.tgz The screen is a keetouch kot-170c-us-sa4bcw accoustic wave touch screen, connected by USB for the touch screen and HDMI to DVI to the OrangePi. The OrangePi One (H3) is on Armbian 22.05 Jammy XFCE and has nothing installed yet, the touch screen is first order of buisness. I have searched for a whil…

Hello, initially, I would like to thank the Armbian project for making many of these SBCs that aren't so common usable with such a good distribution. I'm using a Banana Pi M2 Zero, and the manufacturer provided Android image didn't boot at all and I got concerned I had a brick. However, Armbian has multiple images for this board available and, right now, this board is running Armbian 21.08.6 Focal using the kernel Linux 5.10.60-sunxi. The performance difference compared to a Raspberry Pi Zero is dramatic. And it even has a Mali 400! Step by step, I'm getting more features on the board working, either by reading Armbian documentation or user contributions. From…

Hello everyone, I'm using SBC Rockpi4b running the Armbian system. I encountered a problem when using the Ethernet port. I connected the SBC to my laptop via an ethernet cable directly, just like what I did with the RaspberryPi. while playing with RaspberryPi (Raspbian OS) I can get the ethernet connected, the ip address is set to 168.254.xxx.xxx, i.e., private address. then I can successfully ping the RaspberryPi's ip address in my PC. while playing with the SBC (Armbian OS), the network manager seems to keep waiting a DHCP server repeatedly; and after a while (around 40 seconds) it pops up saying the ethernet disconnected; the only way I can make it connected is to set…

Has anyone gotten this display to work in Armbian? I'm on a Rock Pi 4b and its getting power but I can't get any kind of display out of it over the MIPI cable. I can't find any kind of documentation for how to do this, just vague discussions of overlays - I did try the rock pi raspberry pi display overlay and it doesn't work. Thanks.

Hi all! I just received a NanoPi R4S, and I got a 128GB microSDXC for it. I loaded the rk3399-sd-friendlywrt-21.02-20220721 image onto it using win32diskimager. I put the SD card in, plugged in a USB-C, and let it setup for a few minutes. When it seemed ready, I plugged my laptop into the LAN port and went to its page. I logged in, all looked good. After setting a password, I tried changing some of the LAN and WAN settings, and the page stopped loading. I waited, but nothing happened. As as how I couldn't give a proper shutdown command, I disconnected the power and plugged back in. The NanoPi then booted, but the Sys light k…

Hello dear all, I am currently using Armbian 22.05 Jammy. I am wondering how I can use Python IDE such as Pycharm etc. If you have any suggestions, you are very welcome to comment below. Have a great day.

Hello. I installed armbian (22.05 jammy) on my banana pi m1 (original model). Since it doesn't come with onboard wifi, I decided to attach wifi dongle which uses RTL8188EUS chip. However, although i see it is recognized as "realtek ~~ RTL8188EUS network adapter" when i type 'lsusb' command, it doesn't show up as 'wlan0' when i enter 'ifconfig -a' command. What can I do to make the module work again?

Hi, Sorry wasn't sure where to put this. Looking for a lightweight desktop linux for a ANBERNIC RG351MP https://anbernic.com/collections/handheld-game-console/products/anbernic-new-rg351mp-retro-games-built?variant=40994614542500 Rockchip RK3326 & Mali-G31 GPU Tried the generic ARM64 version but no boot. Do any of the other supported boards have the same CPU & GPU combo? Thanks

Armbianmonitor-U http://ix.io/450c MPV broken (does not play video anymore)...might or might not be related to the last apt update/upgrade I did ? Any hints would be much appreciated...thanks MPV output: $ mpv [osc] Lua error: bad light userdata pointer [ytdl_hook] Lua error: bad light userdata pointer [ytdl_hook] Could not load lua script @ytdl_hook.lua [osc] Could not load lua script @osc.lua [stats] Lua error: bad light userdata pointer [stats] Could not load lua script @stats.lua [console] Lua error: bad light userdata pointer [console] Could not load lua script @console.lua [auto_profiles] Lua error: bad li…

Hello, I installed Retroarch from the repos, tried to install a "core" from the Retroarch updater but no cores were available. I searched about that if the installed version is too old no cores will be available, so I added the Retroarch ppa and installed the newest version, but got the same problem. Does Retroarch work under Armbian? Do I need to manually install "core" binaries? If so, where can I get them? Thanks.

Doing apt search took just a few seconds before, but since some days, probably after an apt update && apt upgrade, it has become so slow that a search takes many minutes (20+ minutes) instead of seconds. I don't know why, and I don't know how to fix this. Do you know what to do? The slow part of the search is where it says "Full Text Search". It reaches 50% quickly, and then goes slow. If it matters: ODROID-C2, Buster