Skip to content
View in the app

A better way to browse. Learn more.
Armbian Community Forums

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Allwinner sunxi

Quick links to search tags:

Banana Pi M4 Zero, BIGTREETECH CB1, Libre Tritium H3, Libre Tritium H5, Olimex Teres A64, Orange Pi One, Orange Pi Zero Plus, Orange Pi Zero 2, Pine64

  1. Armbian running on Pine64 (and other A64/H5 devices)

    Pine A64 · Started by tkaiser,

    We have initial support for Pine64/Pine64+ for a long time in our repository but not released any official images yet. Since this will change soon a sneak preview what to expect. Hardware related issues: Please don't blame Armbian for the few design flaws Pine64 and Pine64+ show: These boards use Micro USB for DC-IN which is the worst possible decision. Most USB cables have a resistance way too high and are responsible for severe voltage drops when consumption increases, then the tiny Micro USB contacts have also a pretty high contact resistance and also maximum amperage for this connector is limited to 1.8A by USB specs. So in case you want …

    poVoq

  2. OrangePi Zero2 - Allwinner H616

    Orange Pi Zero 2 · Started by Werner,

    Before complaining about an issue read this! tl;dr: Put your Zero2 and/or any other H616 based device on the shelf and WAIT for proper support to come. And no. There is no ETA. Assuming usable state end 2021/beginning 2022. Software support is still work in progress and under heavy development. Provided preview images can break any time. Do not report this, we are aware of that and can/will not help you with that if you are not willing to investigate and research by yourself. Feel free to join fellow developers to their efforts to create proper software support. But don't waste our time with complains. Thank you! https://github.com…

    Werner

  3. Need help on Pine A64, 64bit Quad Core 1.2GHz Single board computer

    Pine A64 · Started by khgoh,

    Hi, We are currently developing a low cost single board computer base on Allwinner A64 Processor. Please refer to the pine64.com and https://www.kickstarter.com/projects/pine64/577817754?token=12cf383f for more detail on the board. Currently we requesting open source community to participate and help to bring up Linux BSP to Ubuntu. Please let us know if you are interested. Thanks and regards, KH Goh

    Kris

  4. OV5640 device tree overlay for OrangePi One H3

    Orange Pi One · Started by rreignier,

    Hi! Now that the camera interface has been merged in mainline Kernel, I would like to try to use the OrangePi OV5640 camera module on my OrangePi One. So with the latest Armbian Bionic (20.02.1, kernel 5.4.20), I have been trying to get a device tree overlay. But for now, it fails to compile with: $ sudo armbian-add-overlay sun8i-h3-csi.dts Compiling the overlay Error: sun8i-h3-csi.dts:27.23-24 syntax error FATAL ERROR: Unable to parse input tree Error compiling the overlay My current overlay looks like this: /dts-v1/; /plugin/; / { compatible = "allwinner,sun8i-h3"; fragment@0 { target = <&pio>; __overlay__ { …

    bschwand

  5. Pine A64 MIPI DSI mainline

    Pine A64 · Started by Learnincurve,

    Hi, I have a couple of these boards which I have been using with Armbian and the old, 3.10 kernel. Ideally I would really like to go mainline as later kernels have some functionality that would be useful for my use of the board. The only remaining reason (apart from cpu freq.) for sticking to the 3.10 kernel has been the lack of MIPI DSI support in mainline, but now I see that, despite the Matrix at http://linux-sunxi.org/Linux_mainlining_effort still being red for A64 mipi, some work is being/has been done by Maxime Ripard. I'm just wondering if anyone here knows if a working mainline kernel with DSI for the Pine 64 is starting to look like a p…

    jam

  6. pine64: massive date/time clock problem

    Pine A64 · Started by linda,

    Hello, I have a massive problem as the time/date on my Pine64 keep changing randomly to the year 2113. In my project, I use several Pine64s and the problem now occurs on many of these Pine64s. Unfortunately I need the correct time for my project. I am using the following system: ARMBIAN 5.32.170911 nightly Ubuntu 16.04.3 LTS 4.13.0-sun50iw1 (with additional overlays = uart3 and console = ttyS3) Could this be due to the error described in the post and is the bug fixed in kernel version 4.14? Could I install this kernel version 4.14 via armbian-config (next-kernel)? Thanks a lot for help.

    bwims

  7. Orange Pi Zero Plus spi nor flash - anyone know how to configure for booting

    Orange Pi Zero Plus · Started by schwar3kat,

    From reading through the forums I cobbled together what I thought might work for getting spi nor to boot, but it fails: Activate the spi-jedec-nor overlay in /boot/armbianEnv.txt : overlays=spi-jedec-nor param_spinor_spi_bus=0 Then, after reboot, "cat /proc/mtd" should produce something like this : dev: size erasesize name mtd0: 00200000 00001000 "spi0.0" Here is where it fails - I just get the heading, with no mtd0: 00200000 00001000 "spi0.0". Should I be using a different param_spinor_spi_bus? I assume that once that works, the following will work? apt-get install mtd-utils cat /usr/lib/linux-u-boot-next-orangepiz…

    • 1

      Reputation Points

    • 43 replies
    • 36.6k views
    fcollingwood

  8. Pine H64 Model B

    Pine A64 · Started by Humberg,

    Hello community, I got some brand new Pine H64 Model B this week. Anyone interested in a free test device? Markus

    Igor

  9. H616 mainlining effort

    Orange Pi Zero 2 · Started by mcerveny,

    Hello. I see some progress in H616 (OPIZ2) support in mainline linux (now 6.2RC5 comes with USB) - https://linux-sunxi.org/Linux_mainlining_effort . I tried to setup/enable some other components and I am successful with upstream linux kernel 6.2RC5: - displayengine (drm, fb, mixer, tcon, hdmi) (seems to have some I2C/EDID problems) - videoengine (cedrus) (in testing now) - gpu (3d mali, panfrost) - dma, efuse, thermal ... but I am unsuccessful with - crypto (total different behavior in contrast to H616 manual) and untested - audio codecs and hdmi audio - opp power management (frequency + voltage) for CPU and GPU - SDIO wifi I was also succ…

    ag123

  10. WiFi not working on OrangePi Zero 2

    Orange Pi Zero 2 · Started by gyrex,

    I'm using the latest image Armbian_23.8.3_Orangepizero2_bookworm_current_6.1.53.img.xz and wifi isn't working. Is there something I need to do to load the module or something? sudo nmcli device show GENERAL.DEVICE: end0 GENERAL.TYPE: ethernet GENERAL.HWADDR: 02:00:9E:C4:55:73 GENERAL.MTU: 1500 GENERAL.STATE: 100 (connected) GENERAL.CONNECTION: Wired connection 1 GENERAL.CON-PATH: /org/freedesktop/NetworkManager/ActiveConnection/2 WIRED-PROPERTIES.CARRIER: on IP4.ADDRESS[1]: …

    inkflaw

  11. Librecomputer Tritium H3

    Libre Tritium H3 · Started by Igor,

    [WIP] https://libre.computer/products/boards/all-h3-cc/ Schematics Pros: - yet another H3 Cons: - micro USB powering

    lanefu

  12. Pine64 H64 does not boot from eMMC [solved]

    Pine A64 · Started by __Dirk__,

    Hi all, I hope someone can help me with an annoying but not pressing eMMC boot problem. Recently I bought myself a Pin64 H64 3GB SBC and an 32GB eMMC module (actually ordered a 16GB but got a 32GB :-) ) I have a Waveshare 7" TFT touchscreen attached. SBC and Screen are powered either a 5V/3A PSU or a batterypack. Now the board boots fine and fast! from a Samsung EVO sd card .. no problems there, but I cannot get the board to boot from the eMMC module. What I have done so far: 1) Flash an Armbian Buster image to the eMMC (using a USB_eMMC converter) with Etcher on Linux Mint... Boot the board from eMMC WITHOUT…

    lanefu

  13. None of the images work.. OrangePi Zero2

    Orange Pi Zero 2 · Started by highlander0681,

    Hello I've tried both Bookworm and Jammy (also older version). None boot up - nothing. The red LED starts blinking after after a few seconds. Yes the SD card is good, Yes the power supply is good (both work with the official images). Yes I've tried different SD card and power supplies. Is there an image/version someone can confirm was tested and works? thank you

    Gunjan Gupta

  14. Orangepizero2 22.05 Jammy: is there a way to enable wifi interface?

    Orange Pi Zero 2 · Started by Jodaille,

    Hello, I have abandoned the Orangepizero2 I had bought months ago to use with Armbian, I have confused zero and zero 2. Seeing new release, I have just downloaded/install Armbian 22.05 Jammy. Install is ok, good work, thank you ! The wireless interface seems not enabled, I have looked at dmesg output and nmtui-connect. I could not find info about it, the board name doesn't help a lot. I understand the support of this board is pretty new. Is there a known technic to enable the wifi ? Have a nice day,

    ALIGMSTEN

  15. Custom u-boot configuration howto?

    Orange Pi Zero 2 · Started by Xenomorph Neurotoxin,

    When assembling custom image through armbian build env, how to insert my own config. How to enable support for booting from USB flash? To flash the bootloader in spi-flash I'm flash u-boot-sunxi-with-spl.bin into spi-flash, but have error No Bootable media found. Sorry for my English

    • 1

      Reputation Points

    • 4 replies
    • 16.9k views
    going

  16. Troubleshooting wifi failures

    BIGTREETECH CB1 · Started by bobby3605,

    As other people have noted, there are issues trying to connect the CB1 to wifi after the first boot. I believe I've narrowed down the cause, but I'm not sure about the right way to fix it permanently. The issue I was experiencing is as follows: 1. Flash latest armbian minimal to sd card 2. Plug into CB1 and turn it on 3. Go through first boot setup and connect to wifi normally 4. Reboot CB1 5. CB1 no longer connects to wifi, wpa_cli says 'CTRL_EVENT_SCAN_FAILED' A temporary solution I found is to mask systemd-networkd, then manually unmask systemd-networkd and start it after booting. This suggests that the problem is that systemd-net…

    mattjm

  17. KickPi K2B not booting up: DRAM setup not supported

    KickPi K2B · Started by chuanzz,

    I am using this version "Armbian_community_25.11.0-trunk.334_Kickpik2b_trixie_current_6.12.47_minimal.img". It shows U-Boot SPL 2025.07 (Oct 20 2025 - 18:19:29 +0800) DRAM:This DRAM setup is currently not supported. resetting ... U-Boot SPL 2025.07 (Oct 20 2025 - 18:19:29 +0800) DRAM:This DRAM setup is currently not supported. resetting ... U-Boot SPL 2025.07 (Oct 20 2025 - 18:19:29 +0800) DRAM:This DRAM setup is currently not supported. resetting ... U-Boot SPL 2025.07 (Oct 20 2025 - 18:19:29 +0800) DRAM:This DRAM setup is currently not supported. resetting ... U-Boot SPL 2025.07 (Oct 20 2025 - 18:19:29 +0800) DRAM:This DRAM setup is currently not support…

    c0rnelius

  18. Do you want to HELP? - Pine64

    Pine A64 · Started by Tido,

    Hi, I am glad you are interested to help us. A long time ago at the end of 2015 the Kickstarter was founded and since middle of 2016 the hardware is available. If you look at our download page of Pine64 you can see that since then we have collected a lot of information of which some of it maybe obsolete/outdated/resolved: https://www.armbian.com/pine64/ Now, if you are a lucky owner of such a SBC you have THE CHANCE to help the armbian project. Will you please download the latest Xenial legacy kernel 3.10.y and verifiy if some of the problems listed on the website are already solved in the current release? And if so, please re…

    tibo

  19. PPS-GPIO no longer default kernel configuration

    Pine A64 · Started by windysea,

    After a recent (long overdue) update on my pine64 I found that pps-gpio was no longer working. Further investigation found that the default kernel configuration with 4.19.x no longer includes CONFIG_PPS_CLIENT_GPIO (nor CONFIG_PPS_CLIENT_LDISC). Anyone wishing to use pps-gpio (via overlay) will need to configure and build a custom kernel. user@pine64:~$ cat /etc/armbian-release # PLEASE DO NOT EDIT THIS FILE BOARD=pine64 BOARD_NAME="Pine64" BOARDFAMILY=sun50iw1 VERSION=5.76.190218 LINUXFAMILY=sunxi64 BRANCH=next ARCH=arm64 IMAGE_TYPE=nightly BOARD_TYPE=conf INITRD_ARCH=arm64 KERNEL_IMAGE_TYPE=Image user@pine64:~$ uname -a Linux pine64 4.19.25-sunxi64 #5.76.…

    • 0

      Reputation Points

    • 8 replies
    • 14k views
    windysea

  20. linux-image-legacy-sunxi=24.5.1 (kernel 6.1.92) is broken: stuck at "Starting kernel ..."

    Orange Pi One · Started by mikhailai,

    The Linux kernel contained in the latest "linux-image-legacy-sunxi" (version 24.5.1) package appears to broken to the point of locking-up right from the start. It prints "Starting kernel ...", and no more messages appear even with "verbosity=7" set in the "armbianEnv.txt". The "linux-image-legacy-sunxi" version 24.2.1 boots just fine. Here are the steps to reproduce the problem. I've done this on "Orange Pi One" board, but exactly the same issue occurs on (community maintained) Banana Pi M1. 1. Download and write the Armbian image to a MicroSD card. 2. Connect the serial console, boot the board, finish setup, do all the upgrades: everything works fin…

    mikhailai

  21. Recent images don't boot on BTT Pi

    BIGTREETECH CB1 · Started by Ivan Dubrov,

    Recent images don't boot on BigtreeTech PI V1.2 boards. These are the last log lines I get over the serial: Starting kernel ... Loading, please wait... Starting systemd-udevd version 255.3-1 Begin: Loading essential drivers ... done. Begin: Running /scripts/init-premount ... done. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. Begin: Running /scripts/local-premount ... done. Begin: Waiting for root file system ... Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. <...repeated many times...> Begin: Running /scripts/local-block ... done. done. Gave up waiting for root fi…

    Igor

  22. Orange PI Zero 2 and SPI ILI9341 Touchscreen FBTFT Legacy Kernel - partial success

    Orange Pi Zero 2 · Started by Peter Gregory,

    I got my 320x240 ILI9341 touchscreen to work with the image from the OrangePI site: Armbian_23.5.2_Orangepizero2_bookworm_legacy_4.9.318_minimal The display is one I bought from Amazon Hosyond 2.8 Inches TFT LCD Touch Screen Shield Display Module 320x240 SPI Serial ILI9341 with Touch Pen Compatible with Arduino R3/Mega2560 Development Board This document was very helpful getting the display set up on the OPZero 2: https://tienda.tettsa.gt/wp-content/uploads/2022/08/OrangePi_Zero2_H616_User-manual_v3.7.pdf I still don't have the touch part working. If anyone has success getting 2 selects working with SPI1 on OPZero2 and touc…

    • 0

      Reputation Points

    • 3 replies
    • 12.5k views
    robertoj

  23. First boot with only red LED

    Orange Pi Zero 2 · Started by Fuchsia,

    I can't boot orange pi zero 2 from first use... It displays only red LED and it doesn't change. I connected lan, SD card and power source. What is wrong with my orange pi?

    • 0

      Reputation Points

    • 4 replies
    • 12.1k views
    jscax

  24. Tips on configuring double spi (through two chipselects) on Orange Pi Zero 2.

    Orange Pi Zero 2 · Started by Dan Walton76,

    I've been able to get two /dev/spidev's working on Orange Pi Zero Plus 2 (H5) boards. How is configuring this on a Orange Pi Zero 2 (h616) going to be different or similar? Any tips for getting spi-double-spidev-cs.dts to work? Thanks so much,

    • 0

      Reputation Points

    • 12 replies
    • 12k views
    franz134

  25. OMV on Pine64+

    Pine A64 · Started by clarkss12,

    Pardon my noob question, I am still learning. I have been running Armbian on my Pine board for quite some time, now I would like to use it as a NAS. I really have no idea how or where start. thanks

    • 0

      Reputation Points

    • 28 replies
    • 11.6k views
    clarkss12

  26. Compiling DTS with DTC

    Orange Pi Zero 2 · Started by ALIGMSTEN,

    Hi, hopefully some kind and more knowledgeable soul could provide some pointers, when trying to compile out of tree dts with dtsi includes on orangepizero2. I realise the included files must be pre-processed before compiled and have tried numerous approaches all which failed miserably by not being able to move beyond the following error. Error: dt-bindings/interrupt-controller/arm-gic.h:6.1-8 syntax error FATAL ERROR: Unable to parse input tree The relevant lines in arm-gic.h: #ifndef _DT_BINDINGS_INTERRUPT_CONTROLLER_ARM_GIC_H #define _DT_BINDINGS_INTERRUPT_CONTROLLER_ARM_GIC_H #include <dt-bindings/interrupt-controller/irq.h…

    • 0

      Reputation Points

    • 16 replies
    • 11.5k views
    ALIGMSTEN

  27. OV5640 camera sensor with libretech tritium all-h3-cc board

    Libre Tritium H3 · Started by Rhythm,

    Hi, I have libretech all-h3-cc h2+ DIY board booting with armbian image from https://www.armbian.com/tritium-h3/. I have updated overlays in armbianEnv.txt file to add i2c2 overlay which enable CSI in kernel. But even after I connect the camera sensor module, I can't find any `/dev/video0` and morever there is not any log in dmesg as well. Please suggest how can I add get the camera work with the board. I referred to https://forum.armbian.com/topic/7502-ov5640-on-mainline-kernel/ but as according to that, `/dev/video0` should come up automatically. I don't know what I'm missing. Please help Thanks

    Rhythm

  28. OrangePi Zero 2 (4.9 kernel) does'nt boot after kernel upgrade 30.5.

    Orange Pi Zero 2 · Started by Goerlitzer,

    After upgrade at 30.5. I can't boot the orangepi zero 2 (4.9 kernel). Is there any possibility to reload the old kernel or other ways to fix it? Thanks in advance for answering. config-4.9.255-sun50iw9

    ALIGMSTEN

  29. armbian orange pi one stuck

    Orange Pi One · Started by justin256,

    Hi, I am new to all this and I have downloaded everything to my sd card. When I power on the board it gets stuck on "started update UTMP about system runlevel changes" and does nothing more. some images at https://imgur.com/92ZOiwD

    Stephen Graf

  30. How to use XPT2046 touch controller 3.5inch RPi Display 480x320 pixels

    Orange Pi One · Started by orangeee,

    Hi everyone, I’m trying to get a 3.5-inch RPi display with the XPT2046 touch controller (480x320 resolution) to work on my Orange Pi One (H3). I’ve been looking for guides, but most of them are Raspberry Pi-specific and not directly applicable to the Orange Pi. Here’s what I’ve tried so far: Installed Armbian on the Orange Pi One. Connected the display via the SPI interface. Installed fbtft and tried different configurations for the screen. However, I haven’t been able to get the display to show anything or to interact with the touch input. Does anyone have experience using this specific setup? What drivers or overlays shou…

    • 0

      Reputation Points

    • 3 replies
    • 10.6k views
    robertoj

  31. Banana Pi BPI-M4 ZERO standard support

    Banana Pi M4 Zero · Started by ScoreABSM,

    I really like this small board but with new revision firmware choice is a nightmare... Looking for Debian or Ubuntu with XFCE and support for wifi (usb eth at start if needed ok), bluetooth, HDMI sound, QHD display resolution (2560x1440) Main tests results: - Standard Armbian (V25.2.2 Linux 6.6.75 Ubuntu noble XFCE + overlays=bananapi-m4-sdio-wifi-bt) -> wifi OK, bluetooth NO, HDMI sound NO, bad display perf, buggy screen size (display 1920 when choosing 2560) - Official BPI (V24.8.2 Linux 5.4.125 Debian XFCE + overlays=i2c0 spi1 uart4 -> wifi OK, Bluetooth NO, HDMI sound NO, bug in screen size (limited to 1920) - Other rol…

    ScoreABSM

  32. Pine64 wont boot after update

    Pine A64 · Started by chrisf,

    After flashing Armbian 5.20 to my SD card, running apt-get upgrade, it fails to boot with the new kernel. The last thing I get from the console is Image lacks image_size field, assuming 16MiB ## Loading init Ramdisk from Legacy Image at 45300000 ... Image Name: uInitrd Image Type: ARM Linux RAMDisk Image (gzip compressed) Data Size: 3845164 Bytes = 3.7 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 45000000 Booting using the fdt blob at 0x45000000 reserving fdt memory region: addr=45000000 size=200000 reserving fdt memory region: addr=41010000 size=10000 reserving fdt …

    ZupoLlask

  33. SPI Boot [for USB or PXE without MicroSD]

    Orange Pi Zero 2 · Started by ricaoalberto,

    SOURCE: https://github.com/MathiasStadler/orange-pi-zero-boot-from-spi I spent the whole day trying to boot without a microSD, and I finally got it, using the Orange Pi Zero SPI boot tutorial, with a few adjustments. First of all, you’ll need a microSD card. I used this Armbian version Armbian_24.11.1_Orangepizero2_noble_current_6.6.62_minimal.img.xz Once the system has booted from the microSD: sudo apt update && sudo apt upgrade -y reboot After the system reboots, we need to check if the SPI flash is detected: cat /proc/mtd #It should return something like: dev: size erasesize name mtd0: 00200000 00001000 "spi0.0…

    • 0

      Reputation Points

    • 4 replies
    • 10.3k views
    Guest
    Guest

  34. USB to CAN adaptor

    Orange Pi Zero 2 · Started by Gabriel Zanetti,

    i've try to use a board usb to can, but every topic i see about can and armbian is with spi to can. I very beginner with sbc and armbian. This is the firmware it's runningin board usb-can https://github.com/candle-usb/candleLight_fw

    ALIGMSTEN

  35. Pine64 touch screen on kernel 4.9

    Pine A64 · Started by Learnincurve,

    Hi, I have a pine64 with the official touch screen, currently running Xenial with legacy kernel. I followed the instructions to enable the touchscreen: Also starting with 5.24 Pine64’s own LCD with touchscreen support can simply be activated in /boot/armbianEnv.txt by setting pine64_lcd=on and adding gt9xxf_ts to /etc/modules followed by a reboot. which works fine. Preferably, I'd like to use a later kernel, as I'm not interested in any graphical HW acceleration but would like some of the other improvements in later kernels. When I tried the instructions with kernel 4.9, I couldn't find the gt9xxf_ts module. Is there any way of making this…

    • 0

      Reputation Points

    • 13 replies
    • 9.6k views
    alifiratari

  36. SV08 can't find thermal zone on 6.11.2

    BIGTREETECH CB1 · Started by Sesse,

    Following up from another thread: I compiled an edge kernel (6.11.2-edge-sunxi64) for my Sovol SV08, in part because I'd like ftrace support (for perf sched). It comes up, except there is no /class/thermal/thermal_zone0/ (which Klipper demands to work, perhaps sensibly enough). dmesg says: [ 23.775976] platform 5070400.thermal-sensor: deferred probe pending: platform: wait for supplier It's a bit strange, since my understanding is that the full error message should be “wait for supplier XYZ”, i.e., some specific supplier. This was built with ./compile.sh kernel BOARD=bigtreetech-cb1 BRANCH=edge KERNEL_GIT=shallow and then a hack to us…

    Sesse

  37. Armbian 24.2 and Orange Pi One

    Orange Pi One · Started by ER Samson,

    Seems like the OS "malfunctions" after a few hours to a couple of days. The server is still responding to Pings, but services are all down, such as SSH. Doing a power cycle would make the system available back online, until it becomes non-responsive again. Moving back to 23.11.1 solves the stability issue. To add, I'm using a couple of instances for primary and secondary PiHole DNS servers. Probably similar issue on this thread - I'm a bit of a noob, if someone can redirect me to pasting logs. Can those be found on /var/logs as I haven't explored much. I have downgraded both my OPiOnes to 23.11.1 and Frozen the Armbian firmware updates, so I c…

    Stephen Graf

  38. What is the current status of WiFi on Orange Pi Zero 2?

    Orange Pi Zero 2 · Started by pprdr,

    Hello, I am wondering what is the current status of wifi on Orange Pi Zero 2? Is it working? If yes then on which release? If not then what are the current problems related to this? Is somebody working on it? How one could help to make it working? I am asking because I am a little bit confused because of this This topic is more than 2 years old but I see no update.

    Kiendeleo

  39. Which build image to use?

    BIGTREETECH CB1 · Started by Yell,

    Was using the old MainsailOS Image until recently switching to armbian IOT bookworm and currently bleeding edge for the ghost touch fix. Today i noticed BTT now also released their armbian and armbian+klipper builds recently https://github.com/bigtreetech/CB1/releases So which on is it? Can find any much action on the official linked on https://github.com/JohnTheCoolingFan/armbian-build/commits/btt-cb1/

    • 1

      Reputation Points

    • 10 replies
    • 9k views
    Yell

  40. Pine64+ & Pine64so - uboot - no ethernet

    Pine A64 · Started by Alaric,

    HI, I built the latest images for the Pine64+ & Pine64so - kernel 4.14.x + Debian 9 using the Armbian build scripts and had a problem with the ethernet not operational. Any help would greatly be appreciated. U-Boot SPL 2017.11-armbian (Dec 13 2017 - 23:42:42) DRAM: 2048 MiB Trying to boot from MMC1 NOTICE: BL3-1: Running on A64/H64 (1689) in SRAM A2 (@0x44000) NOTICE: Configuring SPC Controller NOTICE: BL3-1: v1.0(debug):aa75c8d NOTICE: BL3-1: Built : 23:41:50, Dec 13 2017 NOTICE: Configuring AXP PMIC NOTICE: PMIC: setup successful INFO: BL3-1: Initializing runtime services INFO: BL3-1: Preparing for EL3 exit to no…

    Gavinb

  41. Pine H64 model A - emmc boot stuck - sunxi-mmc 4022000.mmc: data error, sending stop command

    Pine A64 · Started by kissste,

    U-Boot SPL 2019.01-armbian (Apr 08 2019 - 01:44:37 +0200) DRAM: 4096 MiB Trying to boot from MMC1 NOTICE: BL31: v2.1(debug):8a08e27 NOTICE: BL31: Built : 00:11:54, Apr 5 2019 NOTICE: BL31: Detected Allwinner H6 SoC (1728) NOTICE: BL31: Found U-Boot DTB at 0xc06ea70, model: Pine H64 INFO: ARM GICv2 driver initialized NOTICE: PMIC: Probing AXP805 NOTICE: PMIC: AXP805 detected INFO: BL31: Platform setup done INFO: BL31: Initializing runtime services WARNING: BL31: cortex_a53: CPU workaround for 819472 was missing! WARNING: BL31: cortex_a53: CPU workaround for 824069 was missing! WARNING: BL31: cortex_a53: CPU workaround for 827319 …

    • 1

      Reputation Points

    • 6 replies
    • 8.9k views
    hexdump

  42. Anarsoul's patches for A64 mainline

    Pine A64 · Started by lukasz,

    I am posting the following in the capacity of an errand boy ;) Anarsoul has done a lot of work on the A64 and has custom patches for the Pine A64, SOPine and the Pinebook that have not found their way into mainline yet (his git: https://github.com/anarsoul/). He only does Arch and has no knowledge of Debian/ Ubuntu. I recently asked on Twitter and PINE64 forum which OS users would like to see the Pinebook ship and many users reported Armbian. If anyone would be willing to help incorporate Anarsoul's work into Armbian so that we could have more features working on the aforementioned devices on mainline, then please have a chat with him in the linux-sunxi or pine6…

    gamelaster

  43. Pine64 Pinebook

    Pine A64 · Started by hojnikb,

    I suggest relevant discussion continues in this thread. I also urge mods to move relavant posts from here. What is Pinebook ? https://www.pine64.org/?page_id=3707 http://www.cnx-software.com/2016/11/24/pinebook-arm-linux-laptop-powered-by-allwinner-a64-processor-to-sell-for-89-and-up/

    • 1

      Reputation Points

    • 22 replies
    • 8.8k views
    Xalius

  44. Pine64+ A64 Kernel 5.9.x analog sound problem

    Pine A64 · Started by Levent Erenler,

    Hi, I try to enable sound on headphone jack with pine64+ but i could not Alsa says "no sound found" at dmesg Could anyone help me? Thank you root@pine64:~# dmesg|grep -i sound [ 2.686397] No soundcards found. [ 6.323086] input: sun50i-a64-audio Headset Jack as /devices/platform/sound/sound/card0/input5 root@pine64:~# aplay -l **** List of PLAYBACK Hardware Devices **** card 0: sun50ia64audio [sun50i-a64-audio], device 0: 1c22c00.dai-sun8i-codec-aif1 sun8i-codec-aif1-0 [1c22c00.dai-sun8i-codec-aif1 sun8i-codec-aif1-0] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: sun50ia64hdmi [sun50i-a64-hdmi], device 0: 1c22800.i2s…

    • 1

      Reputation Points

    • 11 replies
    • 8.6k views
    Pander

  45. Finally.... got Bluetooth working on Pine64 H64 model-B

    Pine A64 · Started by __Dirk__,

    All, Don´t know if anybody else did it... but I got Bluetooth running by modifying the device tree and adding support for communication between the RTL8723BS and UART1 and loading the needed RTL8723B firmware. Distro: Armbian Buster Kernel version: 5.4.30-sunxi64 This is how I did it: 1) Create a patch (xx.patch) with the next content and place it in ~/build/userpatches/kernel/sunxi-current/ --- a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts 2020-04-06 12:37:45.584912094 +0200 +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts 2020-04-06 12:37:45.584912094 +0200 @@ -498,6 +498,21 …

    Igor

  46. Can't install PINE A64-LTS to eMMC

    Pine A64 · Started by linda,

    Is there a way to boot the Pine-A64 LTS with Armbian via eMMC? I can use the SD card to boot the armian-Sopine image, but the eMMC memory is not recognized. With the Ayufan image (jessie-minimal) on SD card (https://github.com/ayufan-pine64/linux-build/releases), I can at least recognize the eMMC memory and using sudo dd bs = 30M if = Image / jessie-minimal-sopine-0.7.19-118.img of =/dev/ mmcblk1 copy to the eMMC memory. I removed the SD card and booted with eMMC. I did the same steps with the Armbian image and write the Armbian image on the eMMC (with the Ayufan image on SD card) sudo dd bs=30M if=Image/Armbian_5.38_Pine64so_U…

    OpenglMan

  47. Pi zero 2 first boot problem

    Orange Pi Zero 2 · Started by Никола Ивахнов,

    Hello. I try to install ambian https://www.armbian.com/orange-pi-zero-2/ to orange pi zero 2 and get there on first start: ▒[100]HELLO! BOOT0 is starting May 13 2020 14:10:04! [105]BOOT0 commit : 593cf83 [107]set pll start [110]periph0 has been enabled [113]set pll end [115]unknow PMU [117]PMU: AXP806 [124]vaild para:8 select dram para0 [127]board init ok [129]DRAM BOOT DRIVE INFO: V0.52 [132]the chip id is 0x5000 [135]chip id check OK [137]DRAM_VCC set to 1500 mv [141]read_calibration error [145]read_calibration error [149]read_calibration error [153]read_calibration error [157]read_calibration error [161]read_calibration …

    • 0

      Reputation Points

    • 7 replies
    • 8.4k views
    ALIGMSTEN

  48. Pine H64 Model B Questions

    Pine A64 · Started by Neko May,

    I've tried searching the forums for info on the Pine H64 Model B, but all the information is rather outdated, so I have some questions: Is this board supported by the images on the Pine H64 page which show a Model A board? (There was mention they work but without ethernet support.) Has ethernet support been fixed in the Pine H64 images for Model B? Are nightly builds still disabled for these boards?

    Neko May

  49. ttyUSB missing on Orangepi zero 2

    Orange Pi Zero 2 · Started by myst,

    Hi, Im running Armbian_21.08.2_Orangepizero2_buster_legacy_4.9.255 on Orangepi zero 2. I don't see ttyUSB in my /dev/ but I can see it when I list usb : root@orangepizero2:~# lsusb Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 002: ID 0781:5591 SanDisk Corp. Ultra Flair Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Any Idea what should I do ? …

    myst

  50. Pine A64(+) should be different from Pine A64-LTS?

    Pine A64 · Started by Tim Makarios,

    I recently bought a couple of A64-LTS boards from the Pine Store, but I couldn't get the official Armbian images to boot on them. https://www.armbian.com/pine64/ I could, however, get Manjaro to boot on them, and when I created an SD card with U-Boot from the Manjaro SD card, and the partition from the Armbian (Bullseye CLI) image, it booted into Armbian. I noticed, though, that Manjaro distinguishes between the Pine A64(+) and the Pine A64-LTS. Tow-boot also makes the same distinction. So I wondered if maybe Armbian wasn't booting on my A64-LTS boards because it wasn't making that distinction, but it should be. (I also noticed that …

    stormwyrm

  51. IDE like VSCode or Atom for Pine64 on Armbian Debian Buster

    Pine A64 · Started by klode82,

    I'm searching for an IDE like VSCode or Atom for my Pine64 with 2GB. I've found a way to install VSCode named Code OSS headmelted, but after 15 minutes the memory gone to be overflow, with the risk to collapse the os. Excluding Geany, is there some IDE that works and can be used for NodeJS/ES6 ?

    sfx2000

  52. Lates build does not boot

    BIGTREETECH CB1 · Started by Swietowid,

    Hello, The latest build Armbian_24.5.1_Bigtreetech-cb1_bookworm_current_6.6.31_minimal.img.xz does not seem to boot on BTT Pi v1.2 (blank screen, no signs of anything happening, no ethernet) I checked archival version Armbian_24.2.3_Bigtreetech-cb1_bookworm_legacy_6.1.79_minimal.img.xz and it works just fine. Any ideas?

    Ash Doi

  53. Orange Pi Zero 2 - Custom DTS Overlay and GPIO Allocation conflicting with image DTS - All header pins pre-allocated for use - which ones are free to use?

    Orange Pi Zero 2 · Started by Peter Gregory,

    I'm using image Armbian_23.8.3_Orangepizero2_bookworm_current_6.1.53 I'm building a DTS overlay for a SPI Touchscreen and every pin I try to use is showing this error: [ 1.441808] sun50i-h616-pinctrl 300b000.pinctrl: pin PC11 already requested by 5011000.spi; cannot claim for 300b000.pinctrl:75 [ 1.441817] sun50i-h616-pinctrl 300b000.pinctrl: pin-75 (300b000.pinctrl:75) status -22 [ 1.441829] sun6i-spi 5011000.spi: cannot register SPI master I'm trying to configure my touchscreen dts to use the SPI1.0 & SPI1.1. However, the pins exposed on the headers are all allocated for device use under 300b000.pinctrl. How do you …

    • 0

      Reputation Points

    • 7 replies
    • 8.1k views
    robertoj

  54. [partly solved] OrangePi Zero2 freezes or looses WiFi connection

    Orange Pi Zero 2 · Started by chaoschris,

    Hi everybody, Since some time i have a problem with my OrangePi Zero2. Not sure about when it started exactly, but possibly it came with the latest kernel upgrade. Until then the device was working without any problems and absolutely stable. Unfortunately i have no connection by cable, only with Wifi and possibly it is only the Wifi connection which isn't working anymore? I found the following entries in /var/log/kern (which are the latest entries until the device restarts): 2025-02-10T19:54:40.037397+01:00 orangepizero2 kernel: [86427.304061] unisoc_wifi unisoc_wifi wlan0: sprdwl_report_connection sm_state (5), status: (2)! 2025-02-10T19:54:40.0…

    chaoschris

  55. No bootloader on Libre Tritium-H5 image

    Libre Tritium H5 · Started by mihanson,

    I flashed a fresh image to my uSD card via dd. $ sudo unxz -c Armbian_25.5.1_Tritium-h5_trixie_current_6.12.30_minimal.img.xz | dd of=/dev/sdf bs=1M oflag=direct conv=fsync status=progress iflag=fullblock When I loaded the uSD into my Tritium-H5 all I got was just the red power light, but no activity. Tried a few different power supplies with the same result. I finally figured out that it appeared the bootloader was missing. I used Libre Tech's flash tool to flash their bootloader to my uSD card. Now I was able to get the Tritium-H5 outputting the boot sequesnce on the serial console. However, it stops at: Spoiler DRAM: 2048 MiB Trying to boo…

    TonyMac32

  56. Pine64 512mb Network Not Working

    Pine A64 · Started by codykl,

    Ethernet does not appear to be working on the latest versions of Armbian with pine64 512mb model (has only 10/100MBps Eth) Current Version: ARMBIAN 5.83 stable Debian GNU/Linux 9 (stretch) 4.19.38-sunxi64 - I have tried 2 boards in case its a hardware issue, no go. - Ethernet works with Armbian Xenial (3.10 legacy kernel) - The network port shows activity when initially powering up, but when it begins boot lights go out. - I have tried many older and newer kernels, including the new 5.1.0 dev kernel, with no luck. - Eth0 show up with command "ip address" but not with "ifconfig" - When I try running "sudo ethtool eth0" I get error…

    • 0

      Reputation Points

    • 10 replies
    • 7.8k views
    Daniel B

  57. Bluetooth doesn't appear after boot very often in Orange Pi 2W

    Orange Pi Zero 2 · Started by sminder,

    I've got Orange Pi 2W board and installed Debian 12 Home Assistant image to it (image link). There is a huge problem with it. Very often there is no bluetooth module appeared in system. I need to reboot system for 10-15 timer to make it work. What can be a reason? I attached 2 boot logs (with good BT appears and no BT appears), I hope it will help to find out the issue. boot_log_bt_good_02.zip boot_log_bt_bad_02.zip

    IBV

  58. How to create bootable Armbian uSD for Pine64?

    Pine A64 · Started by Mac_Ha,

    I am a bit lost how to create a bootable micro SD card with Armbian version for Pine64 board... I've downloaded Armbian_5.20_Pine64_Debian_jessie_3.10.102.7z file from Armbian site, extracted it using 7Zip on my Windows 7 machine and got following 6 files: armbian.txt armbian.txt.asc Armbian_5.25_Pine64_Debian_jessie_default_3.10.104.img Armbian_5.25_Pine64_Debian_jessie_default_3.10.104.img.asc sha256sum.sha AS I understiid, the *.img file is the disk image itself. However writing it to the SD card (using Etcher, as recommended, as well as Win32DiskImager that I've always used to write Pine64 images, then also tried with Rufus) renders t…

    Mac_Ha

  59. orange pi Zero 2 Power on But not Booting

    Orange Pi Zero 2 · Started by Trimx,

    Unfortunately, the Orange pi zero 2 does not start with the Armbian img, it does turn on, but there is only a white line in the top left and it does not boot any further. I once downloaded the original ubuntu image from the manufacturer, this works without problems but is just outdated. Can you take a look at it? Actually wanted to install the pi hole project with Armbian Image: Armbian 22.11 Jammy Kernel 4.9.y, Size: 445Mb, Release date: Jan 10, 2023 SHA hash | PGP signature

    • 0

      Reputation Points

    • 3 replies
    • 7.7k views
    materockt

  60. State of BTT Pi and CB1 support

    BIGTREETECH CB1 · Started by JohnTheCoolingFan,

    Hello. I am taking the task of organizing and performing the BTT Pi and CB1 support update. The plan is to use mainline kernel 6.6 and 6.8 (basically the default sunxi64 config) instead of the BTT fork and use patches to backport kernel patches for drivers and hardware support. The Jira issue is AR-2312, which is a collection of things that will need to be done for this initiative. @Gunjan Gupta @c0rnelius @ag123 @jernej @ALIGMSTEN I'm asking for your help on this, as Igor has said to me that you are more knowledgeable on the state of the board and what it needs. From what I've found, there has been a PR that upgraded the kernel used for BTT CB1 to 6.1.79 using patch…

    JohnTheCoolingFan

  61. using ov5640 with sopine/pine64so baseboard

    Pine A64 · Started by LeopoldVonBuschLight,

    Has anyone gotten the ov5640 camera working with the SOPINE and baseboard? I'm using a prebuilt image from https://www.armbian.com/download/ - Armbian 5.38 stable Ubuntu 16.04.4 LTS 3.10.107-pine64 I've set camera_type=ov5640 in /boot/armbianEnv.txt and rebooted, but I'm having some trouble loading the camera module: Spoiler pi@pine64so:~$ sudo modprobe -r -f ov5640 pi@pine64so:~$ sudo modprobe -r -f vfe_v4l2 pi@pine64so:~$ sudo modprobe ov5640 pi@pine64so:~$ sudo modprobe vfe_v4l2 pi@pine64so:~$ dmesg [ 241.175358] [OV5640@lex]sensor_remove ov5640 sd = ffffffc076b9be00! [ 250.718969] [VFE]vfe_exit [ 250.719007] [VFE]vfe_runtime_resu…

    • 0

      Reputation Points

    • 7 replies
    • 7.5k views
    LeopoldVonBuschLight

  62. Not getting any wireless

    Banana Pi M4 Zero · Started by jgauthier,

    Greetings, I've built a custom image for the BPI M4 Zero and have been using a wired USB cable for my config and development work, It's final destination will require wireless. So I started to configure that today and discovered that it does not find any wireless access points. The device exists. 3: wlan0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN group default qlen 1000 link/ether ac:6a:a3:3f:9c:65 brd ff:ff:ff:ff:ff:ff There is an overlay loaded (I did not add it, it was part of the image build) overlays=bananapi-m4-sdio-wifi-bt usbhost bananapi-m4-pi-5-6-i2c0 bananapi-m4-pi-7…

    -jk-

  63. OPI-zero+ (H5) gpiodmon generates spurious Interrupts* upon invocation

    Orange Pi Zero Plus · Started by Hans Kurscheidt,

    I cut/paste a related information exchange I had w/ Kent from the gpiod mailing list. The arbian-monitor output is in the attached file. >>>>>>>> I wired a GPIO Pin to GND. Upon the cmd: sudo gpiomon -r -n1 -Bpull-up <chip> <offset> the program exits immediately with 1 event, although there was never a rising edge due to the fix wire to GND. Is this a feature or a bug, and is it reproducible? < Not a feature and not reproducible for me on a Raspberry Pi4 with the setup you describe, so probably a bug specific to your hardware platform, whatever that may be. If it is 100% reproduceable for you, and assuming it is a…

    Hans Kurscheidt

  64. BPI‑M4 Zero : how to force USB0 (Type‑C OTG) into host mode on Armbian?

    Banana Pi M4 Zero · Started by Samor140,

    Hi, Board: BPI‑M4 Zero OS: Armbian (Bookworm), kernel 6.12.35 (current) This board has two USB‑C ports: one fixed HOST and one OTG. I’d like the OTG port (USB0) to operate as a host as well. I can’t find any Armbian overlay in armbian-config or on the forums that flips USB0 to host. If anyone has this working, it would be cool to let me know . Thanks!

    • 1

      Reputation Points

    • 14 replies
    • 7.3k views
    c0rnelius

  65. [Pine64] axp20 / sys/class/power_supply problems

    Pine A64 · Started by Chema,

    Hello, This is my first attempt to install Armbian on a Pine64 + that I bought 2 weeks ago. I created one from the source, but as the battery management failed, I tried it with a constructed image (Armbian_5.69_Pine64_Debian_stretch_next_4.19.13.img), but it's still the same: everything works fine, except battery management. The state of battery and energy should appear as files in the /sys/class/power/directory, but this directory is not created. I can see this directory and the battery information in other images (like the version of the 3.1 kernel of Ayufan). What I have seen is a strange error (for me) in dmesg, related to the power management modules (axp..…

    shaddow501

  66. Official images for Orangepi Zero 2

    Orange Pi Zero 2 · Started by Igor,

    Armbian 22.11 Bullseye / Jammy Kernel 4.9.318 or 6.1.4 Release date: Jan 10, 2023 Legacy kernel has more or less full hardware support, while mainline lack functions such is wireless, HDMI, ... https://www.armbian.com/orange-pi-zero-2/ Looking for maintainer!

    Igor

  67. Orange pi zero2 - 1-wire

    Orange Pi Zero 2 · Started by carlos8agomez,

    I have an orange pi zero 2 and I need to configure the 1-wire protocol. I need to know which gpio pin to connect to. Thanks

    lampra

  68. [Uart] Unable to connect to ZWave module?

    Pine A64 · Started by Joda,

    Hello, I have an A64 2GB ( kickstarter ) with the zwave module in Uart on which I installed the latest version of armbian ( Armbian 24.11.1 Bookworm Minimal ) kernel 6.6.62-current-sunxi64 I have activated the Uart2 via armbian-config but I still can not connect via stty or MinOZW sudo MinOZW /dev/ttyS2 ERROR: Failed to set serial port parameters ERROR: Failed to open serial port /dev/ttyS2 sudo stty -F /dev/ttyS2 115200 Input/output error can you help me ?

    Werner

  69. Orange Pi Zero 2 H616 Images

    Orange Pi Zero 2 · Started by jbolger,

    Hi team, There are no current images for Orange Pi Zero 2 at https://www.armbian.com/cf7stdb-entries/orange-pi-zero-2/ The Zero image does not work. I did manage to find an archived legacy image based on some posts from 2022 however nothing on the new kernel works. My question is this: Is there a reason why these devices require unique builds? I understand the kernel drivers may not be in 6.x for this board however I'm more referring to the huge number of builds that need to be supported. Thanks, Jason

    stallion25

  70. Libre Computer Tritium H5 does not boot from eMMC

    Libre Tritium H5 · Started by RussianNeuroMancer,

    Hello! I have three Libre Computer Tritium H5 boards and three eMMC modules on hands. All three eMMC modules is flashed with exactly same Armbian image and exactly same uboot. I also use exactly same PSU and cable for all three boards (however I reproduced this issue with four PSU and three microUSB cables, no difference in behavior was found). All three boards start just fine from microSD (so it's not exactly "Your board doesn't work?" case). One board never boot from eMMC on first power up, but almost always boot on second power up. That reproducible with all three eMMC modules. Two other boards just never boot from any eMMC module…

    Da Xue

  71. orange pi zero plus won't reboot after 'shutdown -r now', only shuts down.

    Orange Pi Zero Plus · Started by darsie,

    Orange pi zero plus 'shutdown -r now' shuts down, won't reboot within 20 minutes. Have to power cycle. reboot worked initially. I installed a few bits and firefox. Not sure what triggered it. In other reports I read kernel upgrades. Could it do a lengthy fsck during boot? 64 GB SD-card/file system. Would some (red or green) LED shine? It's all dark.

    • 0

      Reputation Points

    • 4 replies
    • 7.1k views
    schwar3kat

  72. Headers compilation error

    Orange Pi One · Started by IgorS,

    With new python based build system there is error compiling headers while installing headers deb. Im not sure is it because of new build system or the problem is in 6.1.15 kernel branch. My compile command was: ./compile.sh BOARD=orangepione BRANCH=current BUILD_MINIMAL=no BUILD_DESKTOP=no KERNEL_ONLY=yes KERNEL_CONFIGURE=no COMPRESS_OUTPUTIMAGE=sha,img SKIP_EXTERNAL_TOOLCHAINS=no BUILD_KSRC=no PRIVATE_CCACHE=yes RELEASE=bionic ARTIFACT_IGNORE_CACHE=yes BUILD_KSRC=yes KERNEL_GIT=full While installing i got: igor@honeypot:~/trash/debs$ ls -1 armbian-config_23.05.0-trunk_all.deb armbian-firmware_1-SA56ad-Bf566_all.deb linux-dtb-c…

    IgorS

  73. RESOLVED: a64-pine64+ goodix touchscreen (i2c) fails to load on reboot

    Pine A64 · Started by Learnincurve,

    5.10.4-sunxi64 pine64 board with goodix 7" mipi-dsi LCD touchscreen. The LCD output is working fine across reboots after enabling the dt overlay using armbian-config. For the touchscreen, I have added "goodix" to /etc/modules and the digitizer works fine from all cold boots: ~$ dmesg | grep -i goodix [ 5.836601] Goodix-TS 1-005d: supply VDDIO not found, using dummy regulator [ 5.843605] Goodix-TS 1-005d: ID k}\xfa, version: 7b6f [ 5.866815] input: Goodix Capacitive TouchScreen as /devices/platform/soc/1c2ac00.i2c/i2c-1/1-005d/input/input5 but a reboot leads to either: [ 5.856172] Goodix-TS 1-005d: supply VDDI…

    Learnincurve

  74. Pine64 as Squeezebox Touch replacement (running on Armbian?)

    Pine A64 · Started by Learnincurve,

    Hi, Wasn't sure where to start this as it's at-least potentially and partially off-topic regarding Armbian. First of all, thanks for what appears to be the best distro for the small ARM-soc devices, including the PINE64. I really appreciate all the work and houtrs that many people are dedicating to the project. Some history: The Logitech Squeezebox Touch was launched in April 2010) It has 4.3" colour touchscreen Connects to Logitech Media Server (LMS) through Ethernet or Wifi and plays songs stored there or from a wide range of internet sources. Supports 16- and 24-bit audio with a sampling rate of up to 96 kHz (or up to 192 kHz, enabled by us…

    • 1

      Reputation Points

    • 13 replies
    • 7k views
    Learnincurve

  75. Ether address in armbianEnv.txt on PineA64

    Pine A64 · Started by Andro,

    Running Armbian Ubuntu Xenial 16.04 on a PineA64, legacy kernel 3.10.105-pine64. Why is it necessary or desirable to put the variable 'ethaddr' in armbianEnv.txt? I thought the hardware mac address would be detected by the kernel. Perhaps not?

    tkaiser

  76. [SOLVED] Pine64+ 2GB shows up as 1GB to the world

    Pine A64 · Started by valant,

    Hi. I have a 2GB Pine64+ and have armbian on it. Yes, it's not new, but I noticed the problem only now. It's because my use - in short, I use these boards for hobbyistic low level programming - say an OS loader writing, so it's flash and test, never been looking into linux too deep - only needed utilities. staring at the top is not of that set. Now, when reached the DT parsing, passed by uboot, on this board, my loader, noticed 1GB of RAM... Basically, 1GB, as I see, is a default value set in the dts for pine64-plus yet. The DT is not updated on the fly by uboot, as it looks should be. and when I went to Linux, I saw the same - it sees it as 1GB! …

    • 1

      Reputation Points

    • 16 replies
    • 7k views
    valant
  77. Guest

    [PINE64 A64] Kernel panics with headless boot

    Pine A64 · Started by Guest,

    Hi, I've opened with tag orangepiprime because there was no a64 tag eventhough in the Armbian site is flagged as standard support, tell me if i have to reopen it elsewhere. Anyhow I'm constantly getting kernel panics during boot, I've tested images minimal/cli images starting from 23.5.1 down to 24.5.0 (just downloaded the image and flashed with balena etcher), attached there are all the serial logs of the boot processes, all of them are the same more or less. I've tried: powering from GPIO changing powersupply changing usb cable 4 different uSD cards changing the board hooking it up to a display and none of them …

    • 0

      Reputation Points

    • 13 replies
    • 6.9k views
    Dav

  78. Image won't boot for Orangepi Zero 2

    Orange Pi Zero 2 · Started by RayChang,

    Just tried the latest image for Orangepi Zero2, the Armbian Focal Image(Armbian_22.02.2_Orangepizero2_focal_edge_5.16.11.img Built March 7 2022) The board has startup issue, the serial output seems to load some files in wrong format: U-Boot SPL 2021.10-armbian (Feb 26 2022 - 17:45:38 +0000) DRAM: 1024 MiB Trying to boot from MMC1 NOTICE: BL31: v2.6(debug):510155aa-dirty NOTICE: BL31: Built : 17:45:34, Feb 26 2022 NOTICE: BL31: Detected Allwinner H616 SoC (1823) NOTICE: BL31: Found U-Boot DTB at 0x4a082570, model: OrangePi Zero2 INFO: ARM GICv2 driver initialized INFO: Configuring SPC Controller INFO: PMIC: Probing AXP305 on …

    • 1

      Reputation Points

    • 4 replies
    • 6.8k views
    Gunjan Gupta

  79. Orange Pi Zero 2 stop booting after upgrade

    Orange Pi Zero 2 · Started by PiRat,

    Orange Pi Zero 2 running on current image (from release date: Jan 10, 2023) fail to boot after upgrade. The boot log: U-Boot 2018.05-armbian (Jan 10 2023 - 07:48:03 +0000) Xunlong Software [00.535]CPU: Allwinner H616 [00.538]Model: Orange Pi Zero 2 I2C: ready [00.542]DRAM: 1 GiB Relocation Offset is: 35ec7000 [00.583]secure enable bit: 0 [00.586]PMU: AXP806 [00.591]CPU=1008 MHz,PLL6=600 Mhz,AHB=200 Mhz, APB1=100Mhz MBus=400Mhz [00.773]sunxi overlay merged okqv [00.776]drv_disp_init [00.805]__clk_enable: clk is null. tv_init()950 fetch tv0 err. [00.811]drv_disp_init finish [00.813]gic: sec monitor mode [00.819]flash i…

    Igor

  80. Need Kernel source for linux-image-current-sunxi64 6.12.20

    Orange Pi Zero 2 · Started by ovacikar,

    Hi, I need linux kernel source to compile a custom module. The one I downloaded from kernel.org did not work, got module format error, indicating the kernel is different. i did not have this problem compiling the same module for Armbian lepotato (amlogic) Where do I get the kernel source for my Orangepi Zero 2? Linux orangepizero2 6.12.20-current-sunxi64 #1 SMP Sat Mar 22 19:54:28 UTC 2025 aarch64 GNU/Linux linux-headers-current-sunxi64/bookworm,now 25.2.3 arm64 [installed] Armbian Linux current headers 6.12.20-current-sunxi64 linux-image-current-sunxi64/bookworm,now 25.2.3 arm64 [installed] Armbian Linux current kernel image 6.12.…

    ovacikar
  81. Guest

    6.10.9 breake dtb overlay

    Orange Pi One · Started by Guest,

    In the latest update，kenel 6.10.9 changes the layout of dtb overlays , all dtbo in one single folder, no “/boot/dtb/allwinner/overlay” folder. Is it a new feather?

    • 1

      Reputation Points

    • 12 replies
    • 6.7k views
    Stephen Graf

  82. Unable to Setup CAN Network

    BIGTREETECH CB1 · Started by Rodman,

    Hello, I've been having some issues with the official CB1 image on github provided by BTT. Namely, I'm having CAN issues with bytes_invalid increasing during printing operation which is exacerbated once I add more than 1 CAN device. One of the recommendations was to try a newer kernel so I'm trying to migrate to Armbian. I have called out the appropriate overlays (MCP2515)and verified that they are loaded in the armbianEnv.txt file. However, I am not able to load up a Can network. I have created a file in /etc/systemd/network/80-can.network containing the below info. [Match] Name=can* [CAN] BitRate=1000000 I also ran dtc …

    townie

  83. Orange Pi Zero 2 (H616) - No /dev/spidev on recent kernel for ST7735S display

    Orange Pi Zero 2 · Started by bsrobot,

    Hello everyone, I'm trying to get an ST7735S LCD display working with my Orange Pi Zero 2 (H616). This setup was working correctly with older Armbian kernels, but after a recent update, I can no longer get the SPI device to appear. I have already tried a couple of different configuration methods without success. System Information: Board: Orange Pi Zero 2 (H616) Display: ST7735S (SPI) Kernel Version: Linux orangepizero2 6.12.43-current-sunxi64 #2 SMP Wed Aug 20 16:30:58 UTC 2025 aarch64 GNU/Linux I have recently updated armbian-config by running the update from the script itself. Attempt 1: Using armbianEnv.txt …

    bsrobot

  84. Pine A64-LTS not booting after apt-get upgrade Armbian 10.7 to 10.9

    Pine A64 · Started by Patrick Peters,

    I recently upgraded my working Pine A64-LTS board to Armbian 10.9 by using standard 'apt-get update' followed by 'apt-get upgrade' The update went fine (no error messages) and i rebooted the unit. The unit was unable to mount the root filesystem it complaint about UUID probably incorrect, but this was not the case. After doing some research i found out that the DTB file was changed on the mmc0 part. The option 'non-removable' was removed wich let to the kernel using the PUSH-PUSH routine? cd pins to see if a SD card is present. It looks like it that not all versions of the Pine A64-LTS have this pin or maybe in the past …

    Patrick Peters

  85. Pine64 - System (Booting Up) LED

    Pine A64 · Started by ecolezen,

    [Photo of LED] http://www13.plala.or.jp/pskitty/img/pa64sysled/DSC_0045-photo-led.jpg [LED holes illustration] http://www13.plala.or.jp/pskitty/img/pa64sysled/pine64-drawing-v2-p6.jpg Hi, this is my first post here, after few first hours with Armbian on a 1G Pine64 board... I did a small initialization script to turn "ON" the System LED (upopulated "LED" label on the board), so that it helps to user to know that the boot process is running... I like to ask the dev team to think about including something like it to the Pine64 Armbian images, since the Pine64 board itself does not provide such indicator, the user is left in…

    ecolezen

  86. Question about playing video

    Orange Pi Zero 2 · Started by mr412,

    Hi, does anyone have experience with video playback? is playing 1080p in anyway possible? Which image would you recommend for Orange Pi Zero 2 H616 1GB? Is a desktop x11 mandatory?

    sakesm

  87. Pine64: Unable to export GPIO 64 - 67

    Pine A64 · Started by linda,

    How can I use / release the ports PC0-PC3 (GPIO 64 - 67) in kernel 4.19? In my project I am using the ports PC0-PC3 (GPIO 64 - 67) for in-circuit programming (with avrdude). Everything was fine until I switched from kernel 4.14 to kernel 4.19. Now the ports are already in use. (Although according to the pine64 schematics nothing is connected to those ports) sudo cat /sys/kernel/debug/pinctrl/1c20800.pinctrl/pinmux-pins ... pin 64 (PC0): device 1c68000.spi function spi0 group PC0 pin 65 (PC1): device 1c68000.spi function spi0 group PC1 pin 66 (PC2): device 1c68000.spi function spi0 group PC2 pin 67 (PC3): device 1c68000.spi fun…

    avdh

  88. working overlay for OrangePi Zero 2 to see armbian-config

    Orange Pi Zero 2 · Started by franz134,

    I have an OrangePi Zero 2 with the latest bullseye (5.19). I would like to activate SPI (and i2c) and was in armbian-config to do so. Besides that the system was frozen, i couldn't see anything under the hardware tab even after defreeze (only empty entries and a short pop-up: "usage: grep....." like in https://github.com/armbian/config/issues/33). While researching the problem, I found out that this could be due to the missing "overlay_prefix" in armbianEnv.txt. So i looked and found sun50i-h616-orangepi-zero2.dts in a subfolder and wanted to enter overlay_prefix=sun50i-h616. Now i get the following error message in the hardware tab: "loading error: expected at…

    cabanak

  89. Bluetooth support missing for rev 2

    Banana Pi M4 Zero · Started by ScoreABSM,

    Context: new Banana Pi M4 zero (rev 2) is using Wifi/BT over SDIO, which requires an sdio overlay. Thanks to Armbian team for providing it. Editing armbianEnv.txt to add "overlays=bananapi-m4-sdio-wifi-bt" did the trick for Wifi but BT is still not available (neither in standard or rolling builds)... @c0rnelius I know you tried to figure out why, I'm missing technical knowledge to help... Digging the Internet I saw similar bluetooth issue for radxa zero 3w with aic8800, resolved using hciattach / hci up, but needing an available /dev/ttyS1 (UART1) we are missing here... Do you know why? Could it be the problem for banana pi m4 zero and if yes could an overlay …

    c0rnelius

  90. OrangePi Zero 2 Won't start with new FW

    Orange Pi Zero 2 · Started by Joey Pongallo,

    It looks like the May 28th release produced issues. I tried using the images on the OrangePI Zero 2 and the led only stays red. The prior version worked with no issue.

    Dominik

  91. No gpio on BPI M4-zero

    Banana Pi M4 Zero · Started by jrtaylor,

    Looking at the new BPI M4 zero to replace a RPI zero. The official build listed does not have gpio turned or maybe just not built into the kernel. If I download the image from the BPI website it has it but it based on bullseye and the image is broke. I built my own image but still no go so I am not sure what is wrong. I have built images for other boards and projects with success so that's not the problem. I have a 3.5" TFT touch screen and some relays that I need to run along with a sensor.

    • 1

      Reputation Points

    • 8 replies
    • 6.2k views
    iGNUiCould

  92. Unable to find PHY

    BIGTREETECH CB1 · Started by Sesse,

    Hi, I have a Sovol SV08 printer, which is based on BTT CB1 (to the point of basing its software on the CB1 image). I've upgraded it to bookworm, and then installed the latest current Armbian kernel (I eventually would want to go entirely upstream Linux, but I believe that this isn't feasible yet); linux-image-current-sunxi64 24.8.4 (6.6.44-current-sunxi64). Everything largely works and I can print etc.; however, the wired Ethernet refuses to come up. It just repeats this over and over again: [15101.594239] sunxi-gmac 5030000.ethernet end0: No PHY found! [15101.602516] sunxi-gmac 5030000.ethernet end0: phy init failed [15103.394666] sunxi-gmac 50300…

    Sesse

  93. Possible missing firmware /lib/firmware/rtl_nic/rtl8156b-2.fw for module r8152

    Pine A64 · Started by sgjava,

    Latest Ubuntu Jammy CLI version and I get: update-initramfs: Generating /boot/initrd.img-5.15.48-sunxi64 W: Possible missing firmware /lib/firmware/rtl_nic/rtl8156b-2.fw for module r8152 after apt upgrade.

    sgjava

  94. Composite TV OUT WORKING in Orange Pi One H3, 6.12 current

    Orange Pi One · Started by Error1429,

    Hello, I found this guide: https://github.com/robertojguerra/orangepi-zero-full-setup/blob/main/README2.md I followed the steps and built an Armbian image with current 6.12 kernel and now TV OUT (CVBS, Composite Video), after soldering a cable to the video pin on the board, is working on my Orange Pi One with an Allwinner H3 CPU (the patches might work for other H3/H2+ boards). I would like to get that functionality incorporated into Armbian.

    Error1429

  95. Orangepi Zero 2 can not reboot and can not display on screen with Micro-HDMI port

    Orange Pi Zero 2 · Started by TheOWL,

    Armbian image version: Armbian 22.08 Bullseye Kernel 5.19.y, Size: 388Mb, Release date: Oct 22, 2022 Bug report: 1: When i reboot my orangepi zero 2 , my devices will be power off. 2: I use the newest image , display nothing on screen. But i have an older version image. It display to screen by Micro-HDMI perfect. 3: Is possible to light up green LED after system start? I mean, when the device power on, red LED light up. It's nice. But if light the green LED up after system start up, I can know my system get no troubles and it's running now.

    tpou

  96. [Mostly solved] PineA64-LTS: Unable to get Pine64 LCD screen working

    Pine A64 · Started by p1x3l3d,

    Hi! I'm using the Sopine A64 Armbian Buster image version 5.91 in combination with my PineA64-LTS SBC. First off I'd like to say that it runs great, thank you guys very much for providing this fully featured image and thereby keeping this SBC up to date! For the last few weeks I've been trying to get the Pine 64 7" LCD screen to work with it, but so far unfortunately I haven't been able to. What I've tried: Follow instructions to get LCD working as stated on the older brother's PineA64 page: add 'pine64_lcd=on' to /boot/armbianEnv.txt, and add 'gt9xxf_ts' to /etc/modules, then reboot. No luck. Read about the Allwinne…

    jeanrhum

  97. Capabilities of Orangepi zero2 on Armbian

    Orange Pi Zero 2 · Started by Stephen Graf,

    There are a number of people working on getting the orangepi zero3 to work with Armbian. The zero3 is almost identical to the zero2 which is a supported board. The differences between the two have been taken into account by upstream Linux and u-boot changes in at least Linux-6.6 to the point where it is possible to build a working zero3 Armbian image. Everything else in theory should be identical between the two boards. Any changes should apply to both zero2 and 3. My question is, what capabilities are supported by Armbian on the zero2. What is working and tested? - wifi -Bluetooth -HDMI -sound -gpio -i2c, spi It would be helpful t…

    ALIGMSTEN

  98. OPi Zero 2W - installing arch distro over armbian

    Orange Pi Zero 2 · Started by t-bob,

    First off, I would like to give the crew at Armbian a huge heartfelt thanks for all the awesome work you do under sometimes trying conditions. I would like to present Archian, the bastard child of Armbian & Arch. Why … well, the project I am working on needed current versions of phosh & plasma-mobile and the versions on jammy/bookworm were quite old. The OPi supplied image was quite flaky so I had to find a way to mash these together. And this is the result. It does need to be run as root ! The script has 3 arguments: init - downloads the armbian image file, arch rootfs and arch packages. You need to then write …

    • 0

      Reputation Points

    • 2 replies
    • 6k views
    Curious

  99. usb gadget, g_ether.. on tritium h5

    Libre Tritium H5 · Started by ravelo,

    Hi all, I've read on the forum that support for usb gadget using the µ-usb port on the libre computer tritium needed a kernel reconfigure & recompile. I tried to start with that, but during configuration, I've seen full support already. So, was it supposed to just work ? I target armbian buster server variant. my need is to use IP over an usb (and power) cable between a linux machine (x86 and then arm) and a tritium h5 Thanks in advance

    • 0

      Reputation Points

    • 4 replies
    • 6k views
    usual user

  100. Issue with UART Configuration on OrangePi Zero 2 Board

    Orange Pi Zero 2 · Started by Dmytro Lazor,

    Hello, I am new to Armbian and Linux in general. I am using an OrangePi Zero 2 (H616) board and need to enable the hardware UART. To do this, I tried using the simplest method I could find: running the command armbian-config -> System -> Hardware. However, in the section where I should find options for peripherals to enable, I found nothing. I have tried installing different versions of Armbian, but nothing changed: - Armbian_24.5.1_Orangepizero2_jammy_current_6.6.31.img - Armbian_24.2.1_Orangepizero2_bookworm_current_6.6.16.img - Armbian_23.8.3_Orangepizero2_bookworm_current_6.1.53.img - Armbian_24.5.1_Orangepizero2_noble_current_6.6.31.i…

    ALIGMSTEN

Account

Navigation

Search

Search

Configure browser push notifications
Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.