Other families

I am unable to see how to setup the Pimoroni NVME base for the Raspberry PI 5 with Armbian 23.11.3. Are there published instructions? Is this supported?

• 0

  Reputation Points

• 0 replies
• 1.8k views
• 1 follower

Andro

February 24, 20242 yr

4 2.5" HDDs. [ 1242.509097] BTRFS info (device sda): scrub: started on devid 1 [ 1242.560838] BTRFS info (device sda): scrub: started on devid 4 [ 1242.615578] BTRFS info (device sda): scrub: started on devid 3 [ 1242.703587] BTRFS info (device sda): scrub: started on devid 2 [ 3731.573257] ata2.00: exception Emask 0x0 SAct 0xffffffff SErr 0x0 action 0x0 [ 3731.573272] ata2.00: irq_stat 0x40000001 [ 3731.573279] ata2.00: failed command: READ FPDMA QUEUED [ 3731.573283] ata2.00: cmd 60/80:00:00:2f:2b/00:00:03:00:00/40 tag 0 ncq dma 65536 in res 41/40:d8:30:e2:f6/00:00:05:00:00/40 Emask 0x9 (media error) [ 3731.573300] ata2.00: status: { D…

• 0

  Reputation Points

• 0 replies
• 2.2k views

Mangix

March 12, 20224 yr

I noticed there's a community overlay module that adds a "first boot" script which, among other things, allows you to connect to wifi without ever connecting a monitor or keyboard. But, this overlap doesn't seem to come with the current raspberry pi 4b image (Armbian_23.5.1_Rpi4b_jammy_current_6.1.29.img). I tried downloading the build script, but I don't see an option to enable overlays in that either. Is this supported at this time? Also, I know I could just use raspbian if I want this feature, but I'm hoping to work with armbian because I want my build process to be reproducible on other boards.

• 0

  Reputation Points

• 0 replies
• 3k views
• 1 follower

Nycki

July 16, 20233 yr

I have a new odroid XU4 that I plan to use for Home Assistant in Docker and run other services in containers. I have loaded a fresh copy of Armbian cli (fully updated) with bluetooth from armbian-config. I installed linux drivers for my usb module (rtl8761a) from the manufacturer and it comes up in "bluetoothctl" as registered and pairable. However "bluetoothd show" gives me a "D-Bus setup failed: Name already in use." I will need dbus to pass device information between my docker containers when I install docker and home assistant so this error is concerning. Any ideas on how I might resolve this error? Thank you armianmonitor url: http://ix.io/…

• 0

  Reputation Points

• 0 replies
• 2.9k views
• 1 follower

rostar99

August 26, 20224 yr

I am using an odroid HC2 as home NAS for some years now. Software is armbian/XU4 in debian flavour. At the moment I am running bookworm (which was updated from buster to bullseye and then to bookworm - I know its not supported but it worked fine. And the problem described here started only some month after the last update). Some days ago I wanted to reboot the unit but it was stuck in the boot process. Not available by ssh or any other services. I then found out that the boot stopped because my hard disk could not be mounted from ftsab (while the sd card as root file system could be mounted). After commenting out the line it boots normally. And when logged in by ssh …

• 0

  Reputation Points

• 0 replies
• 2.7k views
• 1 follower

jba

October 4, 20233 yr

Hi, I'm using the minimal Armbian Debian-based image as a starting point to install my favorite desktop environment KDE and related software. I've got everything set up so that I got it working partially. I remember trying the Armbian desktop (Ubuntu flavor) but it did not have it set up out of the box IIRC (I could be wrong). I took a look at how the hardkernel guys set up their official Ubuntu image for Odroid XU4 and used that as a guide to set it up on my minimal Armbian. So here's what I've done and what I've learned I need to do according to the official image: 1. apt install mali-t62x-x11-driver xserver-xorg-video-armsoc-sun4i …

• 0

  Reputation Points

• 0 replies
• 6k views

rs677567

November 11, 20196 yr

Hello, Since debian buster switched to nftables as default, when i want to use the ufw-firewall, the following happens: root@homecloud:~# ufw enable Command may disrupt existing ssh connections. Proceed with operation (y|n)? y ERROR: problem running ufw-init ip6tables-restore v1.8.3 (nf_tables): unknown option "--icmpv6-type" Error occurred at line: 36 Try `ip6tables-restore -h' or 'ip6tables-restore --help' for more information. Problem running '/etc/ufw/before6.rules' root@homecloud:~# I installed both iptables and nftables, and also tried the buster-backports versions of both programs, same issue. When i run the ufw-check-requirements script, i …

• 0

  Reputation Points

• 0 replies
• 4.7k views
• 1 follower

cyagon

July 31, 20197 yr

I recently noticed my ODroid XU4 was reporting weird temperature readings: cat /sys/class/thermal/thermal_zone0/temp -22000 Is this a software issue or maybe hardware failing? Also, I would like to upgrade, is there another board I could just transfer my EMMC to and be up and running? Thanks

• 0

  Reputation Points

• 0 replies
• 1.4k views
• 1 follower

DanOB

October 25, 2025Oct 25

Hello, i am using an Odroid Xu4 in an open Access environment and i want to disable USB Keyboards. I already tried the following: Create a file called, e.g., usbhid.conf in /etc/modprobe.d/ and add the following line: blacklist usbhid Then re-generate your initramfs with: update-initramfs -u -k $(uname -r) or, if you want to rebuild the initramfs for all installed kernel versions: update-initramfs -u -k all After you reboot, usbhid.ko will be prevented from loading. But it doesn't work for me. I Also get an Error while trying to update initramfs dirtydroid@odroidxu4:~$ sudo update-initramfs -u -k all ln: failed to create hard link …

• 0

  Reputation Points

• 0 replies
• 2.9k views
• 1 follower

xu4armbianuser

March 2, 20179 yr

If I boot my Odroid XU4 without the HDMI cable connected, my HDMI display does not work. If I boot with the HDMI cable and monitor connected, the HDMI display works fine even if it is disconnected and reconnected. I am running debian buster. deb http://deb.debian.org/debian buster main contrib non-free I have compared the dmesg output from when HDMI works and does not work and do not see a difference. In case it helps, here are all of the dmesg lines with HDMI in them. root@odroidxu4:~# grep -i hdmi dmesg_hdmi_works_usb_hdmi_plugged_in_at_boot.txt [ 0.000000] Kernel command line: console=ttySAC2,115200n8 console=tty1 co…

• 0

  Reputation Points

• 0 replies
• 3.2k views

Michael Schuh

February 6, 20224 yr

I'm trying to use the radxa 4k camera with armbian. The camera worked on Radxa OS but i wanted to have more camera drivers, hence why I made a custom armbian build with more drivers enabled. The /boot/dtb/ folder was missing so I tried to get the same structure as what I have on my radxa zero3 /boot/dtb/qcom/overlay/qcs6490-radxa-cm-q64-rpi-cm5-io-cam0-imx415.dtbo /boot/dtb/qcom/qcs6490-radxa-dragon-q6a.dtb armbianEnv.txt rootfstype=ext4 user_overlays=qcs6490-radxa-dragon-q6a-cam1-radxa-camera-4k overlay_prefix=qcs6490 overlays=radxa-dragon-q6a-cam1-radxa-camera-4k fdtfile=qcom/qcs6490-radxa-dragon-q6a.dtb usbstoragequirks=0x2537:0x1066:u,0x2537…

• 0

  Reputation Points

• 0 replies
• 1.8k views
• 1 follower

Monke96

June 11Jun 11

armbianEnv.txt is missing from latest XU4 focal image Armbian_21.08.5_Odroidxu4_focal_current_5.4.159_minimal.img. Should I just create on or use boot.ini?

• 0

  Reputation Points

• 0 replies
• 2.2k views

sgjava

January 2, 20224 yr

Hi, i have odroid HC2 with up-to-date armbian (kernel 4.something - i am not at home, i do not remember its version) I have issues with samba speed - before last minority update it was 115/110 MB/s (read/write) now it is 100/90 with cifs mount in arch linux and 60/60 in Windows 10. Cables, router - everything is untact and still the same cpu governor is on demand, samba is installed over OMV, htop shows max 10%, ram the same where can be the problem?

• 0

  Reputation Points

• 0 replies
• 3.1k views
• 1 follower

Romeo

October 29, 20205 yr

Hi, I was unable to boot the latest flavor of armbian for odroid xu4 (Armbian_22.08.7_Odroidxu4_bullseye_current_5.4.218_minimal.img). My Odroid HC2 card shuts down quickly and no ssh connection is possible. The card stays on if the network cable is physically disconnected but stops immediately when reconnected. The /etc/default/armbian-motd configuration file seems to be at fault? it should contain something like this : PRIMARY_INTERFACE="$(ls -1 /sys/class/net/ | grep -v lo | egrep "enp|eth|enx" | head -1)" maybe not : PRIMARY_INTERFACE="$(ls -1 /sys/class/net/ | grep -v lo | egrep "en|eth ... I finally took an older image…

• 0

  Reputation Points

• 0 replies
• 2.1k views

konki

November 16, 20223 yr

Hi, I've installed the latest Armbian on an F3 (Armbian_26.5.1_Bananapif3_trixie_current_6.18.33_minimal.img), updated and upgraded and then rebooted. Unfortunately there's no PWM controller under /sys: bobham@bananapif3:~$ ls /sys/class/pwm/ bobham@bananapif3:~$ which means there's no fan control. According to the official docs, there should be a PWM controller to control the fan. Can the fan controller be added? Thanks, Bob Ham

• 0

  Reputation Points

• 0 replies
• 294 views

Bob Ham

August 19Aug 19

Armbian Bookworm 25.8.1. (minimal) Odroid XU4 with 32GB eMMc After lots of searching and trying 2017 Hardkernel solutions and github etc - And this forum suggestions - I could never get get it to boot. I think this is partly because things have changed since 2016/17. I did not have my eMMc on an usb adapter. Just installed, brand new (untouched from China) eMMc and a imaage install on MicroSD of Armbian. The method I believed should work was "armbian-install". But, it had errors while using mkpartimage. I put debug statements in the script and found the particular instance of invoking mkpartimage. Actually the issue is; 2 files…

• 0

  Reputation Points

• 0 replies
• 4.2k views

davemusic

November 14, 2025Nov 14

I recently built Armbian with Open Media Vault installed at build time. After configuring the system and wanting to make a backup image when I use Win32DiskImager to create an image it succeeds but after I plug the SD back in the board it wont boot. I recently lost power and I have the same issue of the board not booting after power is disconnected. If I make a fresh image it can boot and reboot but if I ever remove power the board will not boot into the OS. What happens when there is power loss the alive led is blinking and the HDMI outputs a black screen with a blinking cursor even when left for hours it doesn't ever stop. The SD card is readable and can vie…

• 0

  Reputation Points

• 0 replies
• 2.6k views
• 1 follower

jeansburger

December 27, 20178 yr

I tried to follow below guide, but I wasnt able to install as the model isn't listed in it. I tried cups and gutenprint but even when the printer was added to cups dashboard, but when I send "Print Test" then nothing prints out. What options do I have here ?

• 0

  Reputation Points

• 0 replies
• 1.5k views

Root Tempy

May 26, 20251 yr

I can't pinpoint the cause of the freeze exactly, but it shows as follows in syslog: At midnight, logrotate was started but never successfully concluded. At the time, I was also recording a stream via smb to the hdd. (Not a very demanding activity) When I tried to access the SBC via network share or ssh this morning, neither would show as available. The SBC was running but "dead". When I rebooted it by re-plugging power, instead of showing ~9:00 o'clock, the SBCs internal clock showed 02:17. Here are the last messages of the syslog before the SBC locked up: I should note that the SBC has been running 24/7 stable for weeks. …

• 0

  Reputation Points

• 0 replies
• 2.9k views

Thule

January 17, 20215 yr

I'm attempting an install to the eMMC on a CM4 (mounted on an Axzez Interceptor) using armbian-install. I've booted Armbian 23.5 Jammy CLI from USB, and armbian-install runs fine, (boot from eMMC, system on eMMC) After transferring the rootfs I get the "Cleaning up ... Almost done." message, and then the following: Error while creating U-Boot loader image with mkimage Error: no u-boot package found, exiting I've run a full update / upgrade and installed armbian-config with no change. What's missing here?

• 0

  Reputation Points

• 0 replies
• 3.6k views
• 1 follower

Zandr

July 21, 20233 yr

Wanted to share my unfortunate experience today of trying to do a fresh install of a newer armbian version in order to accommodate OMV 5 on my Helios4. Was doing everything as usual and after the first boot from the new SD card tried to run armbian-config while still attached to the serial console. That proved to be a mistake as it started some auto install script type of thing and wiped one of my hard drives. Also the GUI wasn't showing properly. The exact same thing happened when I tried to reproduce the same steps. Should have been wiser and connected via SSH after inital boot to go from there. No such thing happened when running armbian-config via SSH for the first ti…

• 0

  Reputation Points

• 0 replies
• 2.2k views

mxr

November 28, 20214 yr

Hello, I would like to sell my helios4 2gb ecc. It's served me well, I've outgrown it and is no longer required Posting on here incase anyone is interested Fyi, I'm UK based for postage

• 0

  Reputation Points

• 0 replies
• 1.7k views
• 1 follower

Declan

November 10, 20241 yr

@gprovost I described last year a process to upgrade from omv4 to omv5. (which is doable). I also did a clean install of omv5 after i was having random reboot issues using the newer kernel5. I ended up using the clean built and reconfiguring all the services and dockers. I do not recommend using the newer kernel if you are using dockers. This is where I would have random system reboots. OMV4 was very stable but since omv4 was eol. I decided to upgrade or do a clean install. I did both with the same random reboots using the newer kernel 5. Once i switched back to the older kernel with my config, I was not having the random reboot issues. I understand this would be ha…

• 0

  Reputation Points

• 0 replies
• 2.9k views

PEW

May 13, 20215 yr

... however Armbian_23.8.1_Helios4_bookworm_current_6.1.50.img.xz worked well and was then upgraded through apt to 24.2.1 / 6.6.16. I was then able to install OMV 7, Plex media server and Transmission on top. warning - the ethernet ports change, breaking scripts where they're hardcoded, e.g the wol service. changing the port in two places in the file and running systemctl daemon-reload ; systemctl restart helios4-wol seems to be running ok. This details the patch: diff --git a/lib/systemd/system/helios4-wol.service.orig b/lib/systemd/system/helios4-wol.service index 965eb74..451b857 100644 --- a/lib/systemd/system/helios4-wol.servic…

• 0

  Reputation Points

• 0 replies
• 2.2k views
• 1 follower

tamsoftware

May 7, 20242 yr

mihanson@armbi400:~$ sudo poweroff Broadcast message from root@armbi400 on pts/0 (Thu 2025-09-04 07:29:16 PDT): The system will power off now! mihanson@armbi400:~$ [41893.451514] reboot: Power down [41893.454658] ------------[ cut here ]------------ [41893.459337] Voluntary context switch within RCU read-side critical section! [41893.459354] WARNING: CPU: 0 PID: 1 at kernel/rcu/tree_plugin.h:331 rcu_note_context_switch+0x4e0/0x530 [41893.475859] Modules linked in: sg rfcomm cmac aes_arm64 algif_hash algif_skcipher af_alg bnep zram zsmalloc binfmt_misc hci_uart btbcm bluetooth ecdh_generic ecc bcm2835_codec(C) bcm2835_v4l2(C) bcm2835_isp(C) bcm2835_mmal_vchiq(C) v4l2_m…

• 0

  Reputation Points

• 0 replies
• 2k views

mihanson

September 4, 20251 yr

HC2 here. Two last 6.1 kernels broke alsa : hw not accessible anymore. Aplay -l lists audio outputs but none may be used. Looks like an omission on kernel flags.. Reverted to Armbian Bullseye : exact same config, but working.

• 0

  Reputation Points

• 0 replies
• 2.1k views

Mascaret

May 20, 20233 yr

Hello all! I used the following armbian image to write to an SD (I'm using an old odroid HC1 btw): https://armbian.site-meganet.com/dl/odroidxu4/archive/ I used the bullseye_current image that was there. On the main download page it says that the file for Odroid XU4 is compatible with HC1, HC2 and MC1. https://www.armbian.com/odroid-xu4/ My odroid HC1 boots ok but any attempt to use the built-in ethernet port results in an instant lock-up. Only way I can "get into" the device is with a USB ethernet adapter although even just issuing a command, eg ifconfig enx001e06366b84 192.168.1.99 locks everything up - even the USB e…

• 0

  Reputation Points

• 0 replies
• 2.8k views

ljones0

June 12, 20224 yr

Hi, I want to make adc pcm1804(simple adc clock + i2s) work with odroid, and manage it by alsa. As I understand, I should add a codec for pcm1804, driver to work with alsa, and device tree overlay. Please, tell me where can I get an example of this, or at least smth to use as a reference ?

• 0

  Reputation Points

• 0 replies
• 2.2k views
• 1 follower

Григорий Селезнев

May 20, 20233 yr

Hi all, Thank to look at following link about my last 5.0.2 standard kernel on HC1 with some issues https://forum.odroid.com/viewtopic.php?f=93&t=34237

• 0

  Reputation Points

• 0 replies
• 3.1k views

Jean-Marc

March 19, 20197 yr

I'm having a problem with my Raspberry Pi 5, which I describe below. I have a DVR connected to it via Ethernet. If I connect both at the same time, dmesg reports a failure and I can't ping the DVR to establish a connection; I have to run `ifconfig eth0 down` and `ifconfig eth0 up`. Can anyone help or know if there's a bug in the kernel version? I'm using Ubuntu 22.04. jammy root:~# dmesg | grep eth0 [ 1.312167] macb 1f00100000.ethernet eth0: Cadence GEM rev 0x00070109 at 0x1f00100000 irq 108 (2c:cf:67:81:d6:2a) [ 3.237493] systemd[1]: Found device /sys/subsystem/net/devices/eth0. [ 3.453483] systemd[1]: Started ifup for eth0. …

• 0

  Reputation Points

• 0 replies
• 1.3k views
• 1 follower

Guilherme

March 6Mar 6

Hello, I just ran a apt-update Sunday on a project and afterwards the XU only have Black screen with blinking _ in the corner, not connecting to LAN, no ssh, etc; red led is on, blue led blinking, no new logs in /var/log. Google' the issue, and several posts points to the /boot dir - however comparing with a know good SD card, I can't see much difference in this directory - other forum post points that a /dev mount point should be changed (but not to what) I can mount the broken SD card and have the following info; /etc/armbian.txt Title: Armbian 5.73 Odroidxu4 Ubuntu bionic next Kernel: Linux 4.14.94 Build date…

• 0

  Reputation Points

• 0 replies
• 2.5k views
• 1 follower

vingaard

May 21, 20197 yr

Hi All, as all my other boards run armbian I thought it only right that my raspberry 4b should run it, has anyone here successfuly installed Armbian on one ? I don't want to use Bookworm as it has Audio problems - my main use of the pi is to host Logitech media server running squeezelite TIA

• 0

  Reputation Points

• 0 replies
• 2k views
• 1 follower

pkfox

April 1, 20242 yr

I've seen a growing memory utilization on my Odroid HC1. It turned out that `irqbalance` is a root cause. It looks like it is a known bug Right now ` irqbalance ` get restarted once per a day to keep it small. $ grep 'resource limit' /var/log/monit.log [MSK Sep 30 21:00:56] error : 'irqbalance' mem amount of 400.0 MB matches resource limit [mem amount>400.0 MB] [MSK Oct 2 01:53:31] error : 'irqbalance' mem amount of 400.1 MB matches resource limit [mem amount>400.0 MB] [MSK Oct 3 06:46:01] error : 'irqbalance' mem amount of 400.2 MB matches resource limit [mem amount>400.0 MB] [MSK Oct 4 11:38:34] error : 'irqbalance' mem amount of …

• 0

  Reputation Points

• 0 replies
• 2.5k views

Igor_K

October 6, 20188 yr

The bios boot menu will not boot at all from that USB stick, unlike from ironrobin aarch64 or ubuntu concept x13s, which do boot (and install).

• 0

  Reputation Points

• 0 replies
• 1.9k views

tja

August 12, 20233 yr

Hi Armbian_25.5.1_Rpi4b_bookworm_current_6.12.28 broken after last upgrade. I run apt upgrade which installed kernel 6.18.10. It breaks ZFS. Provided ZFS version, 2.3.2, supports kernels up to 6.14. Don't forget a snapshot before "apt upgrade" 🙂 Regards, Chris

• 0

  Reputation Points

• 0 replies
• 2.1k views

ChrisO

March 18Mar 18

Fresh-builded armbian image, Helios4. Try to enter armbian-config → system → cpu root@helios4:~# cat /etc/os-release NAME="Ubuntu" VERSION="21.04 (Hirsute Hippo)" ID=ubuntu ID_LIKE=debian PRETTY_NAME="Armbian 21.08.0-trunk Hirsute" VERSION_ID="21.04" HOME_URL="https://www.ubuntu.com/" SUPPORT_URL="https://help.ubuntu.com/" BUG_REPORT_URL="https://bugs.launchpad.net/ubuntu/" PRIVACY_POLICY_URL="https://www.ubuntu.com/legal/terms-and-policies/privacy-policy" VERSION_CODENAME=hirsute UBUNTU_CODENAME=hirsute

• 0

  Reputation Points

• 0 replies
• 2.8k views
• 1 follower

iav

June 15, 20215 yr

I wanted to try Armbian on a Raspberry Pi-5 with a Radxa penta SATA hat. Installed: Armbian_community_25.2.0-trunk.86_Rpi5b_bookworm_current_6.6.63_minimal.img The SATA hat is not detected: root@rpi5b:~# lspci 00:00.0 PCI bridge: Broadcom Inc. and subsidiaries BCM2712 PCIe Bridge (rev 21) 01:00.0 Ethernet controller: Raspberry Pi Ltd RP1 PCIe 2.0 South Bridge I would expect this: root@raspi:~# lspci 0000:00:00.0 PCI bridge: Broadcom Inc. and subsidiaries BCM2712 PCIe Bridge (rev 21) 0000:01:00.0 SATA controller: JMicron Technology Corp. JMB58x AHCI SATA controller 0001:00:00.0 PCI bridge: Broadcom Inc. and subsidiaries BCM2712 PCIe Bridge (r…

• 0

  Reputation Points

• 0 replies
• 3.6k views

ChrisO

November 26, 20241 yr

Can anyone help me convert an Orange Pi image to run on my new Odroid XU4 as I need it running on the older kernal ARMBIAN 5.31 stable Ubuntu 16.04.3 LTS 3.4.113-sun8i The newer Kernal has a few small issues that cause a problem for my setup.

• 0

  Reputation Points

• 0 replies
• 2.5k views
• 1 follower

IsortedIT

December 30, 20187 yr

https://dl.armbian.com/odroidxu4/archive/Armbian_20.05.2_Odroidxu4_bullseye_current_5.4.41.img.xz Third link on XU4 and HC1,2 MC1 download pages are 404 not found. Building an archive for a workshop I'm doing next week and got the 404. No big deal, just wanted to make a note.

• 0

  Reputation Points

• 0 replies
• 2.6k views
• 1 follower

Technicavolous

July 4, 20206 yr

On a fresh armbian bullseye debian install on an odroidhc2, the only change is I installed NCP through armbian softy and a reboot. My sudo account works, but if I try to sign into root it says account unavailable. How can I fix this?

• 0

  Reputation Points

• 0 replies
• 1.9k views
• 1 follower

slatko

October 23, 20232 yr

Hi, I'm considering reinstalling OpenMediaVault using an Armbian image as the NAS performance on the current image I use is very bad (4-7 megabyte via Samba over Gigabit) and I've heard that it should be much better with Armbian. Since I have some data on my NAS that's protected with Ecryptfs, I wonder if the kernel config in a future update could be changed to include Ecrypt_fs module support. Thanks for considering making this change. All the best, Sebastian EDIT: tkaiser from the openmediavault forum took care of this. Thanks!

• 0

  Reputation Points

• 0 replies
• 2.6k views

rainforest1155

November 9, 20178 yr

Hi everyone! Can anyone tell me how to make the system boot without displaying any text characters? I'd like to just see the Radxa logo, then a black screen and the login screen (GDM). What settings do I need to configure to achieve this? I have the Armbian 2.6.4 Trixie CLI image installed with GNOME.

• 0

  Reputation Points

• 0 replies
• 966 views

Hackerman

April 28Apr 28

armbian-bsp-cli-odroidxu4-current is held back because base-files_25.2.2-13ubuntu10-noble_armhf does not exist (again). As before, the fix seems to be wget https://apt.armbian.org/apt/pool/noble-utils/b/base-files/base-files_25.2.2-13ubuntu10-noble_amd64__1-noble-1armbian1-Baa17-U13ubuntu10-R55fa.deb wget https://apt.armbian.org/apt/pool/noble-utils/b/base-files/base-files_25.2.2-13ubuntu10-noble_armhf__1-noble-1armbian1-Baa17-U13ubuntu10-R55fa.deb dpkg-deb -x base-files_25.2.1-13ubuntu10-noble_armhf__1-noble-1armbian1-Baa17-U13ubuntu10-R55fa.deb armhf dpkg-deb -x base-files_25.2.2-13ubuntu10-noble_amd64__1-noble-1armbian1-Baa17-U13ubuntu10-R55fa.de…

• 0

  Reputation Points

• 0 replies
• 2.1k views

prof

March 1, 20251 yr

After I closed the lid of my chromebook Armbian decided to die even across reboots. https://drive.google.com/file/d/1gkEzVoY5QkNcWq3MOKYUSc8nkFYg91p-/view?usp=sharing Video of what I see https://drive.google.com/file/d/17yhnIjzkiYkkVohFrLf7MKDtYyb0xfOL/view?usp=sharing

• 0

  Reputation Points

• 0 replies
• 956 views
• 1 follower

Trickiidum

April 1Apr 1

Straightforward! See signature. Thanks to the team.

• 0

  Reputation Points

• 0 replies
• 2.2k views

FredK

December 3, 20223 yr

Hello, playing around with the HC1 I noticed the lack of the nbd driver within this image. Because of the good documentation and the excellent build chain system I was able quickly to build a installation image solving my needs. My question: are there plans to add the settings necessary for nbd driver generation to the image build configuration ? Otherwise I would have to take care in case of armbian kernel updates. Thanks in advance, Joe62

• 0

  Reputation Points

• 0 replies
• 2.4k views
• 1 follower

joe62

November 30, 20187 yr

Hello! I have connected the WD 10TB RED HDD via external USB 3.0 enclosure to one of the USB 3.0 Ports on the HELIOS4. Unfortunately the speeds don't exceed 45 MB/s. when running RSYNC jobs. On the PC I can completely use the speed of the GBit Port.. When connected to the USB Ports of HELIOS4 the speeds are low. Can somebody help? The external enclosure is from UGREEN. HDD is NTFS formatted. Any advice will be gratefully appreciated.

• 0

  Reputation Points

• 0 replies
• 2.6k views

Vodalex

December 5, 20214 yr

Hi there, I have a little problem with my i2c-screen on the Helios4. It was setup according to the Kobol-Wiki and was working right from the start. However after running for some time (in this example it took around 6 hours) the screen is black and empty. Once I SSH back into the helios and restart the systemd sys-oled.service, it works again for some time... "journalctl -u sys-oled.service" gives the following: Sep 13 10:18:38 helios4 systemd[1]: Started System Starting on OLED Display. Sep 13 16:46:01 helios4 python3[23009]: Traceback (most recent call last): Sep 13 16:46:01 helios4 python3[23009]: File "/usr/local/bi…

• 0

  Reputation Points

• 0 replies
• 2.8k views
• 1 follower

m4110c

September 13, 20215 yr