Werner

https://debug.armbian.de

Odd. It is enabled in config:https://github.com/armbian/build/blob/aa2d4696cac76148d01977f63cc831e492c0f7a2/config/kernel/linux-rk35xx-legacy.config#L2945 Have you installed armbian-firmware-full? Maybe just the firmware is missing.

Tried with code { font-family: Consolas,"courier new"; color: crimson; background-color: rgba(0, 0, 0, 0.2); padding: 2px; font-size: 105%; } modprobe rtw89?

For Ubuntu to say: code { font-family: Consolas,"courier new"; color: crimson; background-color: rgba(0, 0, 0, 0.2); padding: 2px; font-size: 105%; } do-release-upgrade One thing to mention is that code { font-family: Consolas,"courier new"; color: crimson; background-color: rgba(0, 0, 0, 0.2); padding: 2px; font-size: 105%; } do-release-upgrade usually does not work until the first point release. So retry once Ubuntu 24.04.1 has been released. Currently expected for August 15, 2024

Try this: https://github.com/armbian/build/pull/6694#pullrequestreview-2096146300

This is a command provided by userspace and has nothing to do with Armbian. Armbian related packages will be installed - if available (not the case for Lunar. non-LTS upstream userspaces are unsupported in general by Armbian) - and if firmware is unfrozen https://docs.armbian.com/User-Guide_FAQ/#can-i-upgrade-my-userspace-like-buster-to-bullseye-or-focal-to-jammy

Should be 7

known issue https://github.com/armbian/build/issues/6568

yes, it is. 5.2V to .3 seems to be a reasonable value.

Voltage might be an issue. Most SBCs while rated for 5 volts prefer slight overvoltage, last but not least to compensate for voltage loss across wiring, connectors and the PCB itself. Even PSU sold by xunlong in combination with the OPi5, also while rated for 5v actually outputs about 5.2V. I verified this on an OPi5 month ago by measuring at the voltage source which was between 5.2 and 5.3 volts and the USB-A connector on the board which dropped to 5.0 volts when putting on a heavy CPU load. Since the PSU itself has way more than enough power voltage there were constant. Now think about what happens when your PSU only outputs barely enough wattage. Not only the voltage drop mentioned earlier will be there but also the voltage will break down at PSU level which increases the overall voltage drop to a (from a electronics perspective) crazy level. So if your input voltage is 5 volts only it will drop below this and malfunctioning is VERY likely then. I'd test this on the 5+ 32G model if I had one. But mine has 16G memory only.

off-topic closed

https://debug.armbian.de

moved

So OP confirms there is no issue since they refuse to provide necessary information. Case closed.

Matrix chat is considered deprecated. It was barely used by anyone and the user interaction was close to zero. By sun-setting we get some relieve of maintenance burden of overall infrastructure. The same goes for OFTC as 2nd IRC service.

moved

moved

I use an mean well HRP-200-5...but for all my stuff https://media.it-tronics.de/Datasheets/Power_Supplies/MeanWell/HRP-200.pdf

Refer to https://debug.armbian.de to get full-fledged debug logs via UART. @amazingfate can you confirm vendor doesnt work properly?

Means nothing without stating - the exact image you are trying to use (full file name and download source) - the exact method of writing the image to the microsd card https://debug.armbian.de

moved

General recommendation: Do not buy tvboxes. https://docs.armbian.com/User-Guide_FAQ/#i-have-a-tv-boxtablet-from-insert-random-vendor-can-i-use-armbian-on-it

Providing logs with armbianmonitor -u helps with troubleshooting and significantly raises chances that issue gets addressed.

Hi, if you have the choice, do not buy a tvbox. https://docs.armbian.com/User-Guide_FAQ/#i-have-a-tv-boxtablet-from-insert-random-vendor-can-i-use-armbian-on-it I suggest to look around for anything that comes with Standard Support at least: https://www.armbian.com/download/?device_support=Standard support

Because it isn't. That is some other people's work. OP most likely used wrong image.