Allwinner sunxi

Gentlemen, I've spend time looking for the GPIO pinout for the Orange Pi Win I am using with Armbian. Specifically I would like to use SDA and SCL. Does Orange Pi publish some information on this subject? Thanks in advance for your information.

Hello After spending hours of trying to create an older DEV kernel (5.1.21) here are the following steps in order that it will work. I will describle here about the 5.1.21 kernel but I think it can work for any kernel. 1. create lib.config file under build/userpatches with the following: KERNELBRANCH='branch:orange-pi-5.1' 2. And this is what create the magic: download the Armbian files that matches that distribution and replace all the files in the build directory: for example I have downloaded from here - This link is the build version from the branch of the 5.1.: https://github.com/FireflyTeam/armbian-build/tree/e…

Hello! I'm tryiing to make iBeacon scan service. But can't make Bluetooth work on OPi0+2H5. I'm using "Armbian_20.02.1_Orangepizeroplus2-h5_bionic_current_5.4.20_minimal.img" as OS, but no hci devices in system after start. I reded many topics from this forum and nothig helps me. Can't start BT Is BlueTooth part work on this board? Can I use it? I need only "lescan" functional....

Hi, I'm using a cubietruck and bananapi board (both A20 devices) for a long time (They run very stable for many years). I'm using uart3 for interfacing with arduino boards using the kernel overlay. When I upgrade the kernel to a version 5+ the overlay does not work anymore and ttyS3 is not working and missing in dmesg. The behaviour is the same on both boards. Autoboot in 1 seconds, press <Space> to stop switch to partitions #0, OK mmc0 is current device Scanning mmc 0:1... Found U-Boot script /boot/boot.scr 3708 bytes read in 34 ms (106.4 KiB/s) ## Executing script at 43100000 U-boot loaded from SD Boot script loaded from mmc 217 bytes read in …

Hi there, I have 2 OPi PC+, one was with Jessie, then upgraded to Stretch, Working almost fine, only one issue was "systemctl start postgresql.service" not working. I used a workaround, "su - postgres -c 'pg_ctl start'". Postgres not from repo (previously was from repo) but compiled from source, as I need at least version 10 for "logical replication". Not at some point of time, I noticed message, that kernel package is to upgrade (3.4.112 to 3.4.113). After reboot graphics don't start. "No screens found". Ok, so I tried to upgrade (apt update, apt upgrade, apt dist-upgrade after changing name in /etc/apt/ files). Now it's almost crash: - graphics …

I want to drive 2 SPI devices on my orangepi zero. I enabled `spi-spidev` and `spi-add-cs1` overlays and set `param_spidev_spi_bus` to 1. But by I still get only `/dev/spi1.0` available. When I add `param_spidev_spi_cs=1`, I get `/dev/spi1.1` but `/dev/spi1.0` disappears. Do I see it correctly that I can choose *either* `/dev/spi1.0` *or* `/dev/spi1.1` but not both with that overlay? How can I activate both cs pins? There are a bunch of example custom files out there, but none are meant specifically for the setup where I need spi1 (instead of spi0) and need to use a GPIO pin for cs1. And I can't really find any docs on how to write my own overlay. So any help is appr…

Hello, please tell me why Chromium does not work on Orange Pi Prime? Здравствуйте, подскажите пожалуйста, почему не работает Chromium на Orange Pi Prime?

I've read this and it surprised me noone mentioned e2image. I'm using armbian orange pi pc build. The fs is stock ext4 hence why I stick to e2image below. It is not about cloning a live system, hence the sdcard is plugged into my PC. Fdisk shows a single partition at 4M offset. First I backup the partition table and bootloader dd if=/dev/sdX of=offset0.img bs=4M count=1 Next I backup the single partition with e2image into a qcow2 image e2image -Qa /dev/sdX1 part0.qcow2 qcow2 only keeps used blocks. My partition size is 14.7G, space taken is 12%. part0.qcow2 file is 1.7G. Done with backup…

Hi, I have Orange Pi Zero v1.5 with Armbian Buster (mainline kernel 5.4.y) and I would like to use the serial_rs485 struct from user-level. It is possible?

Using Armbian_20.02.1 with 5.4 kernel on NEO2 board, I'm running into an issue trying to get the USB OTG working with the g_ether module. When I run modprobe g_ether I see the following in dmesg: [ 490.490582] udc-core: couldn't find an available UDC - added [g_ether] to list of pending drivers I've also tried compiling my own img using the Armbian builder but it looks like all the correct OTG options are already selected by default. Any ideas what I'm doing wrong?

I am successfully using Armbian Current on my Banana Pi. I have a 120GB usb SSD drive. I'd like to boot from it - my other Banana Pi with the same system boots from SATA connected HDD no problem. When I boot the device, I can see the drive using sudo fdisk -l as /dev/sda1 I can also get the UUID and everything. I've modified the /boot/armbianEnv.txt file and changed the UUID, but I can't get the machine to boot. I tried also to change the UUID to /dev/sda1. Didn't help either. When I boot with HDMI connected, I can see the kernel iterating through USB bus and the result is "no USB storage device found" and that's it. …

Hello I am using NPiNeoPlus2 board (ordered Neo2 but they send me Neo Plus2) I red this is not officially supported but it works some way The image works from TF but when I write it to eMMC it boots it works but can't reboot I type reboot and I get (serial) $ sudo reboot [sudo] password for onir: [ OK ] Stopped target Timers. [ OK ] Stopped Daily apt upgrade and clean activities. Stopping Authorization Manager... [ OK ] Stopped Stopping Session 2 of user onir. [ OK ] Closed Load/Save RF Kill Switch Status /dev/rfkill Watch. [ OK ] Stopped Daily rotation of log files. [ OK ] Stopped target System Time Synchronize…

Hi there. I've got the problem with boot from emmc when empty SD card is installed. Opi PC+ Armbian (debian 9 stretch) Kernel 5.4.20-sunxi I've moved OS from SD to emmc using armbian-config util, then format SD with fat and now when I power on my OPi without SD card all is ok, but when SD installed boot get stuck with error "Script failed", unknown device... I've tried to chang mmc0‘s sdc_detmode, but doesn't have /boot/script.bin Can anyone help? Thank you. Spoiler

Hello all, If i detach battery all works ok. With attached battery system reboots instead of shutting down. Anyone experiencing this issue again with 5.4.21 kernel? Is there a workaround to solve it, maybe in u-boot or somewhere else? Armbian 20.05.0-trunk built from source Thank you

Dear forum, When looking at the Orange Pi Zero schematic V1.1, the OSC-RTC box is empty. Does this mean that there is no crystal for the internal RTC? The internal RTC cannot be used at all? When just checking the time register, the RTC is running too fast. Thanks, Arjan

Hey, i hope this has not been answered already but i could not find it. I also hope this is the right place to report it. The orange pi + does not appear in the list of devices https://www.armbian.com/download/?tx_maker=xunlong but there is a download page for it you can reach by the search. https://www.armbian.com/orange-pi-plus/ i assume its a bug in the web page?

Hello, I tried to install as instruction in this link https://github.com/stdevPavelmc/armbian-hostpot-bridge to convert my orange pi zero to a hotspot bridge, connected to LAN and wifi to my home under Pi-Hole application to block ads Howeverm after i call up the bridge ifup br0 the network is not running, i cannot connect to the PI again. Pi-Hole installed on the LAN interface. The content of the interfaces file # loopback interface auto lo iface lo inet loopback # wireless wlan0 allow-hotplug wlan0 iface wlan0 inet manual # eth0 connected to the ISP router allow-hotplug eth0 iface eth0 in…

Hello It is funny that new kernels going out and kill what developers have made working on older kernels.. For example I have had no issues with GPIOs pull up in 5.1.15-sunxi64 kernel. On Kernel 5.1.15-sunxi64 I do not get those errors; Python: GPIO.add_event_detect(31, GPIO.RISING, callback=count1) RuntimeError: Failed to add edge detection I didnt have any issues with Kernel 5.1.15 but I cannot recreate it anymore. Maybe this will help to give a clue of what is happening: at 5.1.15 kernel: In ArmbianEnv.text I have enabled the w1-gpio: param_w1_pin=PC7 (PC7 Is GPIO-71) …

I have installed ~$ uname -a Linux orangepioneplus 5.4.18-sunxi64 #trunk.038 aplay -l **** List of PLAYBACK Hardware Devices **** card 0: allwinnerhdmi [allwinner-hdmi], device 0: 5091000.i2s-i2s-hifi i2s-hifi-0 [5091000.i2s-i2s-hifi i2s-hifi-0] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: Device [USB PnP Sound Device], device 0: USB Audio [USB Audio] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1 works good alsamixer When choosing allwinner-hdmi

I recently updated from very old Armbian image. The update was not smooth so I had to re-image my device with the newest version. After that USB devices cannot be detected at all. I tried USB keyboard and 3D printer (is should looks like generic serial device). Keyboard works perfectly during u-boot but stops working as soon as kernel starts. lsusb doesn't show any devices: $ lsusb -t /: Bus 09.Port 1: Dev 1, Class=root_hub, Driver=musb-hdrc/1p, 480M /: Bus 08.Port 1: Dev 1, Class=root_hub, Driver=ohci-platform/1p, 12M /: Bus 07.Port 1: Dev 1, Class=root_hub, Driver=ohci-platform/1p, 12M /: Bus 06.Port 1: Dev 1, Class=root_hub, Driver=ohci-platform/1p, 12M /: Bus…

Как мне использовать встроенный микрофон? Pulseaudio

Armbianmonitor: http://ix.io/2c7Y 5.4.20: EXT4-fs error (device mmcblk0p1): ext4_lookup:1700: inode #4950: comm rsync: casefold flag without casefold feature 5.3.9: without error fsck cannot see errors on another system For now, I came back to kernel 5.3.9

Hi everyone, I am using an OrangePi Zero with AllWinner H2+ and I need to catch UART1_TX and UART1_RX interrupts. I have been reading the Allwinner H2+ datasheet (http://wiki.friendlyarm.com/wiki/images/0/08/Allwinner_H2%2B_Datasheet_V1.2.pdf) and I have seen that UART1 interrupts are mented on PG_EINT (section 4.22.2.46) and UART Register Description (section 8.3.5) - I have no clear which registers I should configure to detect the UART1 interrupts, and how to do it. For example, for detecting Received data available, I think I should: - Enable the ERBFI bit in UART_IER register - Check IID field in UART_IIR to de…

Hello, The system changed to ro during update. The armbianEnv.txt file has been corrupted and is empty. I'm looking for how to create it again ... and I can't find it. Can you help? edit: I try to do it myself, but I don't know if that's all. verbosity=1 logo=disabled console=both disp_mode=1920x1080p60 overlay-prefix=sun7i-a20 usbstoragequirks=0x2537:0x1066:u,0x2537:0x1068:u edit: Overall, there were no problems at 5.3.9. During the update to 5.4.20 I broke down. The worst thing is that I'm not in the location : / edit: Search result: it's ok ?

Hello I have problem with UART after some random time i have got serial8250_interrupt with dmesg log. After that my software reading/writing is broken from UART. [88124.598598] irq 42: nobody cared (try booting with the "irqpoll" option) [88124.598617] CPU: 0 PID: 10713 Comm: sas-statistics- Not tainted 5.3.7-sunxi #5.99.191031 [88124.598620] Hardware name: Allwinner sun8i Family [88124.598657] [<c010d751>] (unwind_backtrace) from [<c010a32d>] (show_stack+0x11/0x14) [88124.598674] [<c010a32d>] (show_stack) from [<c0923da9>] (dump_stack+0x69/0x78) [88124.598689] [<c0923da9>] (dump_stack) from [<c0164135>] (__report_bad_ir…

Dear all, Starting from NAND memory used to work fine on the nanopi neo plus2, however with the new boards (both v1.2 and v2.0 revision) we just obtained it frequently doesn't want to reboot, while a cold boot works fine (I tried also earlier u-boot versions (2019.04, 2018.11) without much success for the reboot from NAND). The re-boot process stops at this point (from the serial console): [ OK ] Reached target Shutdown. [ 152.452083] reboot: Restarting system U-Boot SPL 2019.10-armbian (Jan 25 2020 - 19:56:27 +0100) DRAM:…

Hi, I have recently installed latest (20) Armbian Desktop for OPi PC(+), have problems installing software from network repo (synaptic). 1). Small version problem with one of Qt5 libraries (dependency for Kadu - Polish communicator GG client), synaptic wants version 1u1, on the net there is version 1u3. Installed using wget + dpkg, now Kadu starts (at least) OK. 2). PostgreSQL problem: there is version 11 of PgSQL provided, OK, it's current production. BUT there is PgAdmin3(!) in repo, which works with at most version 9.6 of PgSQL (from PgAdmin site). Now there is PgAdmin4, but (I) cannot make it work (compile from source OK, but doesn't start)., there is N…

I have two NanoPi R1s, both with Armbian Buster. I want to use both as wireless access points, however the wifi seems to be problematic. It always works at first, but not anymore after updating, changing the config and rebooting. My hostapd config is the following: # # armbian hostapd configuration example # # nl80211 mode # ssid=[myssid, contains some numbers] interface=wlan0 hw_mode=g channel=6 [11 on the other one] #bridge=br0 driver=nl80211 logger_syslog=0 logger_syslog_level=0 wmm_enabled=1 wpa=2 preamble=1 wpa_psk=[random thing armbian-config generated] wpa_passphrase=[secret] wpa_key_mgmt=WPA-PSK wpa_pairwise=CCMP rsn_pairwise=CCMP wpa_strict_rekey=1 wpa_dis…

Hi there, i need some help with using the UART1 pins 8 & 9. I own a Duo with Ubuntu 16.04.6 I've installed a software that is able to send codes over the UART1 pins to my smart home system. The software is 'active (running)' but has no connection via UART1. UART1 is enabled(npi-config) but i does not work. WiringNP is required for my software and installed. Is there any point i've missed? Did i have to switch UART1 pins to in- and output? One error i get: Service Control Manager on computer xx.x.x.xx cannot be opened. You may not have permission to do this. PS: These pins must work, i rebuild an…

Just wanted to note this - target NanoPi NEO2 - task at hand is Byte-UnixBench.... https://github.com/sfx2000/byte-unixbench more to follow... Spoiler 2708.074105] Unable to handle kernel paging request at virtual address f7ff8000358ddbf0 [ 2708.082298] Mem abort info: [ 2708.085153] ESR = 0x96000004 [ 2708.088834] Exception class = DABT (current EL), IL = 32 bits [ 2708.094826] SET = 0, FnV = 0 [ 2708.097899] EA = 0, S1PTW = 0 [ 2708.101086] Data abort info: [ 2708.104010] ISV = 0, ISS = 0x00000004 [ 2708.107886] CM = 0, W…

Dears, We have 4 boards Nanopi Neo2, but when we connect to energy, they don't boot, leds of net port (green and yellow ones) and internal led (red) are on all time. We tried to access via serial port (using an usb-serial adapter), but they not show any boot process. We tried some different boot images on sd card. Nothing works. All four devices are in this situation (and they are new!). There is any thing we can do?

how i can enable usb wifi on orange pi pc ?

Hello All, I'm trying to set-up MCP2515 on 8mhz on orange Pi one on SPI0 running recent installed Armbian 5.9 / Linux 3.4.113-sun8i can bus support orange pi zero i was reading trough above for pi Zero and trying get the unit up and running, but no luck till now, CAN unit is modifed, so 3v3 for mcp and 5v for can tranciever, connections: pin1 3v3 power on vcc for mcp2515 pin2 5v power for cantranciever pin6 gnd pin19/PC0(GPIO Orange PI) MOSI - (MCP2515<->CAN) SI pin21/PC1(GPIO Orange PI) MISO - (MCP2515<->CAN) SO pin23/PC2(GPIO Orange PI) CLK - (MCP2515<->CAN) SCK pin24/PC3(GPIO Orange PI) CS - (…

Hello everybody! I wanted to report that I was unable to boot with the "Bionic minimal 20.02.0-rc1" image "Bionic minimal 19.11.6 current" did not work either The red onboard is led flashing nothin else works. The Bionic download link on the top of the page is dead as well. With the same board, SD-card, power supply and USB cable I had no problem so far running the "Buster 20.02.0-rc1 current" image (beside some "armbian-configuration" flaws Did not try any further debugging so far any ideas? Andreas

Hello If I would like to build a specific Kernel (5.1.15-sunxi64) that I have already made before and just want to add some patches to the kernel, what is the right command? ./compile.sh BOARD=bananapim64 BRANCH=5.1.15y RELEASE=bionic BUILD_MINIMAL=no BUILD_DESKTOP=no KERNEL_ONLY=no KERNEL_CONFIGURE=no INSTALL_HEADERS=yes

Hello, I'm trying to setup and access point with an orange pi zero. Note that the internal wifi card is not used and an 802.11 ac usb key is used. Hostapd boot up fine and mobile phone can connect to AP. Howover after few second the orange pi complety stop responding and the serial console loop with these message : [ 264.167603] unexpected IRQ trap at vector 00 [ 264.171871] unexpected IRQ trap at vector 00 [ 264.176140] unexpected IRQ trap at vector 00 [ 264.180409] unexpected IRQ trap at vector 00 [ 264.184678] unexpected IRQ trap at vector 00 [ 264.188946] unexpected IRQ trap at vector 00 Any …

hello Igor, way i can`t download https://dl.armbian.com/orangepizeroplus2-h5/Bionic_current ??? can you update link?

So I click load desktop and it completes that but when I try to enable it asks me if I want to enable autologin and it doesn't matter if I choose yes or no it just says killed, what's wrong? , i have an internet connection

Hi, Is there any reason why the card is only initialized as high speed SDHC on this board? On my phone, it is initialized as ultra high speed SDR104 SDHC. I'd like to know if there's anything I need to do to maximize the card's performance on this board. Thanks.

Hi folks, is there a reason behind the Olimex Micro board being listed as "SUPPORT ENDED (EOS)" on the armbian web site? Cheers, Klaus

Hi all, Orange Pi One Armbian_20.02.0-rc1_Orangepione_bionic_current_5.4.14 Enable w1-gpio /boot/ambianEnv.txt: overlays=w1-gpio param_w1_pin=PD14 param_w1_pin_int_pullup=1 dmesg | grep -E 'w1|wire' [ 5.271798] Driver for 1-wire Dallas network protocol. [ 5.304021] gpio-110 (onewire@0): enforced open drain please flag it properly in DT/ACPI DSDT/board file What and where else needs to be done?

Hi everyone, As the title, I would like to set the isolated cpu 3th on orange pi zero (armbian v4.19.62) I've try to follow this answer of ChrisK in the topic here And the boot.cmd file after edited as below: # DO NOT EDIT THIS FILE # # Please edit /boot/armbianEnv.txt to set supported parameters # setenv load_addr "0x44000000" setenv overlay_error "false" # default values setenv verbosity "1" setenv console "both" setenv disp_mem_reserves "off" setenv disp_mode "1920x1080p60" setenv rootfstype "ext4" setenv docker_optimizations "on" setenv devnum "0" setenv rootdev "/dev/mmcblk${devnum}p1" setenv bootargs console=ttyS0,115200 noinitrd root=/dev/m…

Hi everyone, I want to have a diskless Orange Pi Win, i'm trying to get the Ethernet to work in u-boot, but it does not seem to connect at all with my router when booting, no blinking led at all (none on the Pi neither on the router), I tried différents cables, ports, searched on the web, found some "patches" on DTS file on the web for pine64... But nothing seems to work (but Ethernet works correctly when the Pi is booted on Linux). Any Idea ? Many thanks,

The Orange Pi Zero +2 H3 with USB hat will hard lock up on boot at "Starting Armbian Hardware Monitoring" when booting the latest (and at least one previous) available Buster (and Bullseye) images over HDMI console. Tested on multiple SD cards with the same result. (I will test with serial later, I do not have the time to remove it from the case at the moment; I figured I would post it now in case anyone had a chance to check before I could.)

orange pi one armbian buster purged non free software I installed flashrom. In sudo armbian-config -> system settings -> toogle hardware I marked spi-spidev. Saved. Restarted computer. /dev/spi* displays nothing. How can I enable spi in armbian? Thank you.

I am looking for a working python "wiring library" for the NanoPi Air.... With pyGPIO i have limited success. Only GPIO4 seems to work. Just a quick "use this libray for python..." please. I need 3 GPIO pins (and UART1 which is working well under python...) Thank you!

Hi! I use this board since jun/2019 with Armbian 5.90 and kernel 5.1.15 (all OK except HDMI audio). In these 6 months tried to update kernel image few times, 5.2.x some months ago and now 5.5.0, but not more 1920x1080 support, the maximum is 1280x1024. Xrandr not show as supported mode anymore, whats happen? This is related to u-boot? I think can not read EDID, because no monitor model name is shown. Another question is, now in 5.5.x I can see HDMI audio device, but still can't listen, what left to be developed?

https://components101.com/sites/default/files/component_pin/Beaglebone-Black-Pinout.png I could not find a picture numbering the pins on an orange pi one. Up right pin by the arrow is pin1, pin below pin1 is pin2 and pin left to pin1 is pin3. http://www.orangepi.org/images/orangepione_info.jpg I want to use an orange pi one to install libreboot on a thinkpad t400's flashchip. Which of the following pins on the beaglebone black's p9 corresponds to which pins on the orange pi one? beaglebone black pin 17 -> ? 18 -> ? 21 -> ? 22 -> ? gnd -> ? 3.3v -> ? H…

Hi there. I want to use a push button on a GPIO to shutdown O Pi Zero safely. Though the acpid way runs fine on an O Pi One, I wonder if there is a way to make it work on a O Pi Zero. Please direct me if its documented somewhere already. Thanks

anyone running a neo+ 2. don't bother with neo2 image, it doesn't recognise emmc or wifi card the nanopi K1plus image works beautifully and supports both emmc and wifi module

Hello, I have spend a lot of time trying to make it work I2C PL0/PL1 of orangepi zero plus 2 H5. I change sunxi-h3-h5.dtsi to status="okay" and i can not to see i2c PL0/PL1 only I can see others i2c. Can anybody help me to understand what I am doing bad? Spoiler r_i2c: i2c@1f02400 { compatible = "allwinner,sun6i-a31-i2c"; reg = <0x01f02400 0x400>; interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&r_i2c_pins>; clocks = <&r_ccu CLK_APB0_I2C>; resets = <&r_ccu RST_APB0_I2C&g…

Hello guys! I haven't found any helpful regarding to my problem, maybe you are more professional as me! (I'm not really!) I would like to set an ordered DHT22 temp & humidity sensor to work on this SBC. OS is : NAME="Ubuntu" VERSION="18.04.3 LTS (Bionic Beaver)" Kernel : Linux cubieboard2 5.3.9-sunxi #19.11.3 SMP Mon Nov 18 18:49:43 CET 2019 armv7l armv7l armv7l GNU/Linux I can export a pin as GPIO, and control a simple led. I've built a kernel module for DHT22 found on github : https://github.com/edwardlintw/DHT22 The main problem is, after successful GPIO export : echo 202 > /sys/class/gpio/export cat /…

I'm looking for udev rules or some other way to read system LEDs without sudo. I tried https://github.com/todbot/blink1/blob/master/linux/51-blink1.rules, but I suspect it's not 100% what I need for the Duo.

orange pi one h3 512mo ram didn't boot up and it stop at starting kernel this happend for both armbian version in the armbian website , i tryed also a version from the official website of orange pi one and it pass this step but show black screen .is there any image work properlly on orange pi one H3 please hekp

Yesterday ubuntu issued updates related to DRM, packages: ii libdrm-amdgpu1:armhf 2.4.99-1ubuntu1~18.04.1 armhf Userspace interface to amdgpu-specific kernel DRM services -- runtime ii libdrm-common 2.4.99-1ubuntu1~18.04.1 all Userspace interface to kernel DRM services -- common files ii libdrm-etnaviv1:armhf 2.4.99-1ubuntu1~18.04.1 armhf Userspace interface to etnaviv-specific kernel DRM services -- runtime ii libdrm-nouveau2:armhf 2.4.99-1ubuntu1~18.04.1 …

I'm trying to disable the HDMI output on my A20-OlinuXino LIME. I have tried to disable the HDMI from the u-boot console using this commands : -setenv video-mode sunxi:1024x768-24@60,monitor=none -saveenv I have also tried to recompile the boot.cmd but even in this way nothing. Corrently i'm using : Linux lime 4.19.62-sunxi #5.92 Where is my mistake? Thanks in advance.

fbtft_device - remove after kernel 5.4. How connect SPI TFT to Orange PI PC+ box? ------------------------------------------------------------------------ Welcome to Armbian buster with Linux 5.4.8-sunxi System load: 0.30 0.11 0.04 Up time: 1 min Memory usage: 9 % of 998MB IP: 192.168.0.106 192.168.0.104 CPU temp: 49°C Usage of /: 2% of 59G Last login: Wed Jan 15 19:37:39 2020 from 192.168.0.140 elephant@pls-home:~$ sudo modprobe fbtft_device rotate=90 name=piscreen speed=16000000 gpios=reset:2,dc:71 txbuflen=32768 fps=25 [sudo] password for elephant: modprobe: FATAL: Module fbtft_device not found…

According to the specs of the OP PC Plus, it only supports 32GB micro SD. My only 32GB that I have, that I was booting from on the OP PC plus eventually got corrupted, and will not boot, can't format and install armbian or anything. What are my options? Can I somehow boot from a 64GB micro sdcard, or USB from a fresh armbian image write?

Ok, so, first of all, I am a complete noob. I bought Banana Pi thinking that it is similar to Raspberry Pi's architecture but it's obviously not. I bought a 240x240 Waveshare 1.3 inch hat and I was wondering how to get it working on my Banana Pi Zero (H2+). On Raspberry Pi I can use Juj's fbcp-ili9341 driver but it's probably not compatible with Armbian, right? How do I go about it? Also, it would be nice to know how to detect buttons (that are on the hat) and convert them to key strokes. Thanks!

Basic information: Board: Orange Pi Plus 2e Image: Armbian_19.11.3_Orangepiplus2e_buster_current_5.3.9.img Issue: No sound on HDMI output There has been quite a few suggestions for this issue here and and OrangePi Plus and none works for me. Tried following: 0. sudo apt-get update && upgrade 1. Created and Changed /etc/asound.conf Version 1: pcm.!default { type hw card 1 } ctl.!default { type hw card 1 } Version 2: pcm.!default { type hw card 1 device 0 } ctl.!default {…

Thanks for providing the new Buster image (5.4.7) for Orange Pi One Plus. All the essential stuff works well, giving me new software possibilities. As a technical feedback, I'd just like to mention 1) the red light keeps shining (instead of turning green, but Armbian runs very well, anyway) 2) an attached monitor doesn't receive any signals (but I prefer SSH anyway) 3) the console keyboard layout wouldn't accept any changes (but using SSH, that doesn't make any difference now). Everything else in armbian-config worked fine. Great tool!

Hi everybody, I need your help in setting the default values of some or all GPIO Pin, so that it will be always activated after reboot instead of deactivated like the default is today. The reason for this is that I've connected a relaisboard to some GPIO Pins that will need "1" to be deactivated . Everything works fine, I can control and work with these Pins like needed by using "1" for OFF and "0" for ON. After booting up my BPI I initialize the needed GPIO Pins via export the pins. That will create virtual directories for these Pins with these defaults: direction -> in value -> 0 Like I mentioned, my relaiseboard need a logica…

I installed the latest 5.4.8 Buster Desktop image on my Orange Pi +2e board but find the Mali drivers are (Utgard) missing or not loaded. I have tried to follow every possible links including (https://linux-sunxi.org/Mali_binary_driver) related to get VDPAU / VAAPI and GPU but with very little success. I want to have HW acceleration enabled for playing MPEG in full screen mode 1920x1280 resolution using mpv. The frame drops are significant. Questions: Are Mali drivers included in this build? If it is then how can I go about adding those drivers. Is there any licencing issues in adding Mali drivers to the Armbian image? Is there any chances of Lim…

Well, I have this old M1 lying around. I found use for it. However HDMI output seems to be broken and I have composite video USB dongle at my hand and it boots... but I can not do anything with it. The question becomes: How on earth can I make it "ssh login"-able from the first boot (preferably with mdns)? What should I do with the image? Auto configuration tools - as handy and nice those are - are not for this. Thanks.

I recently updated my Orange Pi Zero Plus to the 5.3 Kernel and since then it failed a few times. I tried to find the reason why it hangs, and when connected using ssh, I get the message kernel:[ 275.633561] thermal thermal_zone0: critical temperature reached (100 C), shutting down After seeing this, I started a program that generates load and watched the temperature and CPU in htop. Temperature goes up to 100°, but the CPU stays at 1.3Ghz. After downgrading to kernel 4.19.63 it works as expected again. Temperature raises, but then the CPU speed is limited, first to 1.01Ghz, then 960MHz and then temperature is always low enough to stay at …

Hi All! Is it possible to enable 1.8 Ghz on kernels 5.4.x (stable one) and 5.5-rc2 ? Thanks in advance!

Hello, I have been struggling for some time with random freezes. I am running application with i2c0 Fram and UART1 for transferring/receiving data based on MAX3232. The freezes cause no response from Orange PI (debug UART too), only unplug power helps. I read that it may be a problem with powering but i tried many USB power adapters 2A, 3A and ATX power (28A) connected to GND and 5v, nothing helps. I have lowered cpu max frequency to 816Mhz and still the same. All necessary data uploaded via armbianmonitor.

Hi, I am facing an i2c problem on orange pi 3. The i2c0 is enabled in armbian-config. The i2cdetect output is correct, as I know my two slave boards connecting to gpio pin3 (SDA) and pin5(SCL) have the addresses 0x20 and 0x23. pi@orangepi3:~$ sudo i2cdetect -y 0 0 1 2 3 4 5 6 7 8 9 a b c d e f 00: -- -- -- -- -- -- -- -- -- -- -- -- -- 10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 20: 20 -- -- 23 -- -- -- -- -- -- -- -- -- -- -- -- 30: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 40: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 50: -- -- -- -- -- -- -- -- -- -- -- -- -- -…

Hi, I am trying to use the SPI interface on the board GPIOs of a BananaPi M1+. I have started the latest version of Armbian available for this board (Armbian_19.11.6_Bananapi_bionic_current_5.4.8) and after the initial configuration the "/boot/armbianEnv.txt" file has the following added lines: fdtfile=sun7i-a20-bananapi-m1-plus.dtb overlays=spi-add-cs1 spi-spidev param_spidev_spi_bus=0 I have rebooted but I am unable to use the spidevX.Y under the "/dev" folder. What am I missing? NOTE: I have tried several combinations of values on the armbianEnv.txt configuration file (ie: using only overlays flags without the other ones, using only the spi-spidev flag,…

Hi Can I setup A64 cpu frequency in bananapiM64 (images taken from pine64 classic ) at 1150MHZ? Now is 1010Mhz. Armbian 19.11.3 Pine64 Bionic current kernel 5.3.9. I have solid fan and this frequency is low.

Hi everyone, I installed the latest version of armbian available today for cubietruck. The volume coming out of the 3.5mm jack is really low. I checked on pulseaudio and the volume is set to maximum. I'm from another distro and didn't have this problem with audio before. Could someone help me? There are other people that have the same issue? Thanks in advance.

Hello, a few Days ago, i make a new installation on a new SD Card of Buster from here https://www.armbian.com/cubietruck/ on my Cubietruck. Everythink looks fine and run well, but now i have sometimes no connection over ssh to my Cubietruck and the only Think that helps, is to pull the Power Cuble. After i plug it again, everything runs fine a time long..... What can this be? What can i do? Thank you

Hi... im trying to find some post thtat explains if i can get armbian installed on 2m SPI and what is the effect that it causes.. my device is Orange pi win plus... Thx a lot..

Had a bit of a success with HDMI audio and also video acceleration on OrangePi 3. What was needed was to apply some patches from LibreELEC, namely ones from projects/Allwinner/patches/linux/ . For HDMI audio to work you need 0004-sun4i-i2s-improvements.patch , which contains support for I2S on H6. When done right you should see in dmesg: asoc-simple-card sound: i2s-hifi <-> 5091000.i2s mapping ok Also what helped was an IRC chat that Jernej had with mirko some time ago: https://irclog.whitequark.org/linux-sunxi/2018-03-14 For video acceleration you need 0005-cedrus-improvements.patch and compile Cedrus driver. When done right you shou…

Hello few day ago I install one again ARMBIAN in my OPI WIN PLUS this version https://dl.armbian.com/_old/orangepiwin/archive/Armbian_19.11.4_Orangepiwin_bionic_current_5.3.13_desktop.img.gz When I was typing armbian-config The loading config setting was missing sudo apt-get install armbian-config and after install. when I login via putty I see screen like below before that I don`t have any main screen Could You advice what`s heppen (when I was first install those image (.5.3.13_desktop.img.gz) I`m remember the OPI WIN screen.

Hello, I have a Orange Pi One Plus and i install Armbian image but the ethernet doesnt work. I dont know how fix it. I have search on other post but i cant resolve it. Thanks for your replies!

I try connect 3.5' LCD screen, but i have error ---------------------------- Jan 4 12:24:38 pls-home kernel: [ 54.977794] fbtft: module is from the staging directory, the quality is unknown, you have been warned. Jan 4 12:24:38 pls-home kernel: [ 54.981924] fbtft_device: module is from the staging directory, the quality is unknown, you have been warned. Jan 4 12:24:38 pls-home kernel: [ 54.982417] fbtft_device: unknown parameter 'gpios' ignored Jan 4 12:24:38 pls-home kernel: [ 54.982696] spidev spi0.1: spidev spi0.1 1000kHz 8 bits mode=0x00 Jan 4 12:24:38 pls-home kernel: [ 54.982947] spidev spi0.1: spidev spi0.1 1000kHz 8 bits mode=0x00 …

Hello, Since the kernel 5.3, used for ARMBIAN reached EOL: http://lkml.iu.edu/hypermail/linux/kernel/1912.2/04661.html Is there any movement to a new kernel version?

Is anyone still working with cubietruck? I installed the latest mainline image over Christmas expecting it to have the cedrus driver but apparently it does not. I thought that everything except HDMI audio should be working in mainline now. So I installed the latest legacy image. It plays videos well but bluetooth doesnt work. I switched it on in armbian-config and 'rfkill list' shows it as not disabled but the bluetooth manager shows no adapter and search is grayed out. This is a regression as it used to work to some extent. Also, very importantly for me, neither image switch over to battery power when the AC goes out. This also used to work on leg…

Hi, as a newbie in this forum, I see a lot about HW, but almost nothing about OS Versions? Puzzled, where to place, I try to do this here: After installing Debian Buster & XFCE on an OPI-Zero, I'm getting frquently installation errors. Its always dpkg: unrecoverable fatal error, aborting: files list file for package 'xfce4-timer-plugin' is missing final newline E: Sub-process /usr/bin/dpkg returned an error code (2) like this one: ┌────────────────────────────────────────────────────────────────────┐ │ • MobaXterm 9.4 • │ │ (SSH client, X-…

Hello Today my system was suspended after 5 times hit power button OPI was turn oFF After turn on, can`t connect to Network by eth0 or any WI FI. I have no idea whats happen I swap the wire but Led on eth connector in OPI yellow/green is blinking. Restart router and is the same What I should do?

After few hours wlan0 lost connection for unknown reason (reason=0) and then it looks like some kernel module crash. Is it driver problem? Any suggestion will be very appreciated! Dec 31 19:22:05 tns_3np wpa_supplicant[1097]: wlan0: CTRL-EVENT-DISCONNECTED bssid=40:b0:76:58:52:d8 reason=0 locally_generated=1 Dec 31 19:22:05 tns_3np wpa_supplicant[1097]: p2p-dev-wlan0: CTRL-EVENT-REGDOM-CHANGE init=CORE type=WORLD Dec 31 19:22:05 tns_3np wpa_supplicant[1097]: p2p-dev-wlan0: CTRL-EVENT-REGDOM-CHANGE init=USER type=COUNTRY alpha2=CZ Dec 31 19:22:05 tns_3np NetworkManager[812]: <info> [1577816525.4151] device (wlan0): supplicant interface …

I noticed with the latest bionic image on the Duo it does a soft shutdown when you use the built in button. The problem is I use this button for my own uses. Can this feature be disabled and relinquish control of the button? gpioinfo | grep k1 line 3: unnamed "k1" input active-low [used]

Hello Ones again I need Your advice for steering RGB LED APA106. I try to search for any program to control this Led but most of them is for RPI and it`s not work for My OPI. Is this connection for DIN should by for any SPI1?: Do You have idea how to for example set change color of led ? Regards

Armbianmonitor for 5.4.6: http://ix.io/260C From switching between 4.19.x and 5.4.x kernels I noticed that the lower cpu frequencies got missing. It should start at 120MHz like this: root@horangepione:~# uname -a Linux honeypot2 4.19.84-sunxi #19.11.3 SMP Mon Nov 18 18:39:42 CET 2019 armv7l GNU/Linux root@horangepione:~# cpufreq-info -o minimum CPU frequency - maximum CPU frequency - governor CPU 0 120000 kHz ( 11 %) - 1008000 kHz (100 %) - ondemand CPU 1 120000 kHz ( 11 %) - 1008000 kHz (100 %) - ondemand CPU 2 120000 kHz ( 11 %) - 1008000 kHz (100 %) - ondemand CPU 3 120000 kHz ( 11…

Hello, a few months ago I wrote a tutorial to enable the 7" touch display for Banan Pi and Banana Pi Pro. Unfortunately the files (*.dts e.g. sun7i-a20-bananapro.dts) have changed and I don't know how to integrate the patches in the current armbian version. Does anybody know how to do it? Is there already a overlay to enable it? Thanks. Steffen

Hello, I’m from Russia, I don’t speak English well, I write a translator through Google, I hope you will understand me. My Orange Pi One Plus H6 installed different Armbian image 5.3.9 the system works well, but there is no sound via HDMI, in the pulseaudio tab of the configuration menu it says "there are no cards available for configuration". Did I understand correctly that the H6 processor does not support the audio codec, so there is no sound, or am I doing something wrong? Thanks for the answer.

Previously worked, but not now. I am stuck in the login line and cannot login with the keyboard from the putty screen. I cant login with keyboard on USB2. Also HDMI not working. HDMI previously worked too. I am newbie. Thanks in advance. I cant remember which version loaded on the eMMC. U-Boot SPL 2019.04-armbian (Jul 06 2019 - 20:55:41 +0200) DRAM: 2048 MiB Trying to boot from MMC2 NOTICE: BL31: v2.1(debug):bb2d778-dirty NOTICE: BL31: Built : 20:55:33, Jul 6 2019 NOTICE: BL31: Detected Allwinner H6 SoC (1728) NOTICE: BL31: Found U-Boot DTB at 0xc079e78, model: OrangePi 3 INFO: ARM GICv2 driver initialized NOTICE: PMIC: …

Hello. I'm writing a program that requires sound.target. I was reading about sound.target and how it's a special systemd unit that doesn't load until the system finds the sound card. Armbian takes quite a bit of time to find the sound card on the OPi, around 30 seconds. Or, maybe it's something else that's making it take so long. I was wondering if there was a way I could mess around with systemd or something else to make the sound card found faster, thus sound.target and my program loading faster upon powering on the device. Thank you

Hello Ones again I`m would like to connect 1 LED to GPIO and make it blink . I try to find tutorial on Wen but for OPI Win it`s not work (duo to lack tutorial for this models) Could You help me wrote simple code to make LED start blinking? With program included in Armbian to steering GPIO for my OPI Thanks in advance.

Hello, I am going to start looking into running Docker on OPi +2E soon, but before I get stuck in details I would like to know whether other people have had experience with it..? In particular, I would like to know what to expect when trying to run Docker on an OPi +2E. Having a report from prior experience would be helpful. As far as I understand, Docker is still in pretty much experimental stages on ARM. Kind regards, @ullbeking

Hi all. I've been working with the OPi3 and PineH64 model B the last days to try installing MESA and DRM drivers to make Panfrost work. This doesn't seem to work. Every time I install Mesa and reboot. It boots into the desktop normally, but a few seconds later the screen goes into one color. Everything is unresponsive. Can't go to a terminal window. Numlock is stuck... Just tried again with compositor disabled. It does take a bit longer before it blocks. But it still happens about a minute in every time. I can't find a ttl adapter for better debugging. I'll order new ones. Both the OPi3 (bionic 5.4) and PineH64(bionic 5.3) have the same issue. I'm using self …

I'm trying to send a music from my NAS on the base of Cuibetruck (Allwinner Tech SOC A20 ARM Cortex-A7 Dual-Core T) Ubuntu Xenial with Armbian Linux 3.4.113-sun7i with bluealsa to my bluetoothreceiver connected to speakers. My working configs are in my answer to the question: https://askubuntu.com/questions/1197072/sending-audio-to-bluetooth-speaker-with-bluealsa Anyway when I play mp3 with mpd or wav with aplay the music is extremely stuttering. Question on bluealsa Github (https://github.com/Arkq/bluez-alsa/issues/279) ended with advice to check UART set up (which is already too complicated for me). My question is anybody managed to setup a nice and smooth audio ou…

Hello everyone, Apologies if this is not the right forum for this questions, but could not find any more appropriate one after some searching. I get an HTTP 404 when I try to access the pre-built images for the nanopi m1 plus from the board page. I know the board is EOS but for other EOS boards I can still download the images. Is there any reason why this board seems to have disappeared completely ?

Hello I upgrade my last version Armbian and after shutdown the system the next day armbian won`t start. I download newest version burnd SC card an after loading is restarting 30 times. So I change new sd card burn one again armbian and is the same. I use converter from HDMI do VGA - and my experience is that converter very stress CPU so i connect directly to TV with HDMI but is the same Could You advice how to install Armbian on my OPI WIN PLUS. Regards\

Recently I wanted to give another try to a NanoPi NEO Plus2 but I noticed that it is marked as not supported and there is no Armbian Bionic image for it (the links in https://www.armbian.com/nanopi-neo-plus2/ return 404). So I checked about other FriendlyElec H5 boards: https://www.armbian.com/download/?tx_soc=h5&tx_maker=friendlyelec (I had to edit the URL as otherwise one cannot add multiple filters) And I picked the K1 plus as a close relative; the Bionic image seems working without any issue, I will keep testing and report back. The only minor issue that I could find so far is that htop will show 0 Mhz for all cores. I have report…

I have an early model of the 14" pinebook with the 1366x768 panel, apparently this model has invalid EDID which prevents the display working. During booting the log is full of errors like this and also a [ 10.808400] [drm:anx_aux_transfer [analogix_dp_i2c]] *ERROR* Failed to wait for AUX channel (status: 02) [ 10.816392] [drm:anx_aux_transfer [analogix_dp_i2c]] *ERROR* Failed to wait for AUX channel (status: 02) [ 10.816409] [drm:anx6345_bridge_enable [analogix_anx6345]] *ERROR* Failed to power up DisplayPort link: -110 [ 10.816415] [drm:anx6345_bridge_enable [analogix_anx6345]] *ERROR* Failed transmitter initialization: -110 [ 10.816420] [drm:an…

How can i use multiple microphone with Orange Pi Zero to make voice enable device?

Hello, What kind of speed can I expect from the ethernet on the BPM1? It's told to be 1Gb/s, but I am not even getting near that speed: wget https://cdn.kernel.org/pub/linux/kernel/v5.x/linux-5.4.5.tar.xz ... linux-5.4.5.tar.xz 100%[==============================================================================================>] 104,37M 4,43MB/s in 24s 2019-12-18 22:38:33 (4,35 MB/s) - »linux-5.4.5.tar.xz« gespeichert [109435988/109435988] BPM1 and the router are set to 1000Mb/s, and the download line works at more then 100Mb/s. Downloading the same file on my PC shows a considerably difference: …

Hi all! First time poster, i apologize in advance for any etiquette violations... I have an OrangePi Zero H2+ board and the DS18B20 sensor (waterproof version). I have soldered the pullup resistor between power and data cables. I have Armbian Stretch 5.83 with 4.19.38-sunxi kernel. I have enabled the w1-gpio overlay and loaded the w1-therm driver. Data is on PD14 (GPIO 10), power is on 5v (tried also on 3.3v) I can see this in my dmesg: [ 10.371825] w1_master_driver w1_bus_master1: w1_search: max_slave_count 64 reached, will continue next search. [ 58.171052] w1_master_driver w1_bus_mast…