Other families

Hi, I've been using my cubox-i 4x4 for close to one year and now after one reboot no hard drive connected to Esata port works. I tried with different debian isos and they work fine on the sd card and hard drives connected to usb ports too.... Any help?

Hello, i was using my cubox-i 4 pro since two years now. Last time (last week) i have used a armbian legacy debian version from whatever, after my hdd corrupted (i have a backup) i tried to setup the system again with a new ssd and the newer version of armbian but i have a few problems. First i flashed the mainline 4.9.7 dd-image on my sd card with rufus. That one is not booting. I can see in a seriel session that the uboot is starting after the line booting the kernel nothing happens any more. In my router i can not see any ip from dhcp is given out to the system and it does not do anything more. After that i have tried the legacy 3.14.79 what when i flashed …

Hello I have a nanoPc t3 plus board and I cannot boot it. I searched and I found a related topic that has the same problem but there is no answer. I believe the problem is because of different mem chip but the same revision (1709) Can boot armbian whit compiled friendlyArm Uboot? topic URL my memory chip picture and logs (from the topic) \

I installed "Armbian_5.25_Cubox-i_Ubuntu_xenial_default_3.14.79_desktop" because I am having many other troubles with "Armbian_5.25_Cubox-i_Ubuntu_xenial_next_4.9.7_desktop". Everything looks working fine until I noticed I can't use firefox over a RDP, in any user session. Also I would like to comment I can't make work chromium, getting all time a white page with a "Aw, Snap" message. Any idea about how to fix these two problems?

The hummingboard edge has a RS485 port on UART2? What would it take to get to get this running? The latest build does not have ttymxc1 enabled. And I think the driver for the RS485 is different than the normal RS232 Driver. thanks

Hi everyone, since upgrading to the new stable build DKMS refuses to compile any driver package for the 8812au Wifi chip I could find on github: make ARCH= CROSS_COMPILE= -C M=/root/rtl8812AU modules make[1]: *** M=/root/rtl8812AU: No such file or directory. Stop. Makefile:1576: recipe for target 'modules' failed make: *** [modules] Error 2 I did change the makefile to reflect compiling for ARM. This procedure worked on the old stable kernel. Is there a way to modify the Makefile or kernel sources to accept the new kernel...or is something borked with my system? The error message does not point me to a direction to check for a fix. C…

Hello, I have a brand new cubox-i4x4 and am attempting to install Armbian Stretch mainline kernel 4.15.y I downloaded the image from https://dl.armbian.com/cubox-i/Debian_stretch_next.7z used keka and etch to extract and write image to the SD card. After installing the SD card in the cubox and powering on, it gets stuck at: U-Boot SPL 2017.11-armbian (Jan 24 2018 - 22:39:16) Trying to boot from MMC1 U-Boot 2017.11-armbian (Jan 24 2018 - 22:39:16 +0100) CPU: Freescale i.MX6Q rev1.5 996 MHz (running at 792 MHz) CPU: Extended Commercial temperature grade (-20C to 105C) at 24C Reset cause: POR Board: MX6 Cubox-i DRAM: …

Greetings - I took the contents of the Armbian_23.8.1_Jetson-nano_bookworm_current_6.1.50 image and put it on my NFS server in an attempt to network boot my Jetson Nano device. After making some adjustments to the pxelinux.cfg so that it points to the correct files on my tftp server, the device fails to boot with the following u-boot output: Tegra210 (P3450-0000) # pxe boot 1: Armbian Retrieving file: /boot/jetson-nano-1/uInitrd Using eth_rtl8169 device TFTP from server 192.168.123.4; our IP address is 192.168.123.38 Filename '/boot/jetson-nano-1/uInitrd'. Load address: 0x83200000 Loading: #############################################################…

Hi, I installed Armbian on a Cubox 4x4, I realize this was designed for a different board, but in general it works. But I found there was a problem with the system clock, it kept booting up with the time: Thu 01 Jan 2015 10:07:23 AM CET After some investigations, I found that this board has two hardware clocks: /dev/rtc0: Thu 01 Jan 2015 10:05:17 AM CET -0.616496 seconds /dev/rtc1: Fri 13 Nov 2015 08:23:47 AM CET -0.603090 seconds It looks like rtc1 has a battery and survives reboot, but /dev/rtc0 does not. I tried setting the clock using "ntpdate" on boot, but I found that something kept resetting the time. I found it is /etc/rcS.d/S06hwclock.sh …

Hi I tried both latest cubieboard images, Fokal and Buster, both stops booting here: U-Boot SPL 2020.10-armbian (Nov 23 2020 - 16:05:27 +0100) DRAM: 1024 MiB CPU: 1008000000Hz, AXI/AHB/APB: 3/2/2 Trying to boot from MMC1 U-Boot 2020.10-armbian (Nov 23 2020 - 16:05:27 +0100) Allwinner Technology CPU: Allwinner A10 (SUN4I) Model: Cubietech Cubieboard I2C: ready DRAM: 1 GiB Yes, I tried different power supplies and SD cards. Any idea what could I do? Thans Chris

Hi there, I see `iw list` is showing that the i4 pro's internal chip supports AP mode. [1] However, when I try to run `/usr/sbin/hostapd /etc/hostapd.conf` it errors out with no driver entry or driver=nl80211 in hostapd.conf [2] Configuration file: /etc/hostapd.conf Failed to create interface mon.wlan0: -95 (Operation not supported) wlan0: interface state UNINITIALIZED->COUNTRY_UPDATE wlan0: Could not connect to kernel driver Using interface wlan0 with hwaddr 40:2c:f4:ae:16:c6 and ssid "aa" Failed to set beacon parameters wlan0: Could not connect to kernel driver Interface initialization failed wlan0: interface state COUNTRY_UPDATE->DISABLED w…

Hi Igor, is there a possibility to compile HummingBoard image with libmmal.so, from Raspberry Pi?

Hi, I just tried last Debian iso from solidrun where bluetooth is working. It is the only issue I have with my Cubox-i 4x4 working with debian from armbian. But there is always a but..... I can't copy the system to the hard drive and make it work after reboot, only works from sd card. So my point is How can I use the benefits of armbian (it's tools) on another iso where drivers look work fine? thanks.

I migrated my system from Wheezy from udoo.org which installed long ago to Armbian Jessie. The main stuff is working and i also manged to boot the new kernel (u-boot config). When i do apt-get upgrade the system always want to upgrade the initrd file. I get the following error messages: update-initramfs: Generating /boot/initrd.img-4.4.51-udoo Warning: root device rootfs does not exist Press Ctrl-C to abort build, or Enter to continue Warning: /sbin/fsck.rootfs doesn't exist, can't install to initramfs, ignoring. update-initramfs: Converting to u-boot format Unsupported platform. run-parts: /etc/initramfs/post-update.d//flash-kernel exited with return code…

Hey guys, since noone seems to care at the solid-run forum, I ask here. I would like to compile SDL2 with opengles and vivante support. I've installed the drivers from this post http://forum.solid-run.com/linux-on-cubox-i-and-hummingboard-f8/about-opengl-drivers-and-binary-blobs-packages-for-t2013.html With both versions of debian (armbian and the official) ./configure can't find these drivers, all I get is "dummy" for the video driver. With arch linux there were no problems at all, it worked right out of the box. Does someone have a hint for me. This is my last hope. Thanks in advance McCarthy

Hi, I have used ARMBIAN Debian GNU/Linux 8 (jessie) 3.14.79-cubox the upload speed was horrible about 2,5 Mbytes/s Now I switched the kernel to vanilla ARMBIAN Debian GNU/Linux 8 (jessie) 4.8.4-cubox the upload speed is now about 8,5 Mbytes/s On booth kernels the download speed is ok about 48 Mbytes/s root@tombase:~# ifconfig eth0 eth0 Link encap:Ethernet Hardware Adresse d0:63:b4:00:c4:04 inet Adresse:192.168.15.7 Bcast:192.168.15.255 Maske:255.255.255.0 inet6-Adresse: fe80::d263:b4ff:fe00:c404/64 Gültigkeitsbereich:Verbindung inet6-Adresse: 2003:84:ab4c:ac00:d263:b4ff:fe00:c404/64 Gültigkeitsbereich:Global …

Hello, i have Hummingboard 1 with mainline kernel 4.11.6. And i have problem with GPIOs, after exporting GPIO 72 (also i try 73,71,1 / pin 11,13,7), set direction to OUT and value to 0 i have still 3.3V on pin 12 (11,13,7...). Also try 72 as OUT value 1 and 73 as IN ... and short this pins 11-12 by wire. gpiochip2: GPIOs 64-95, parent: platform/20a4000.gpio, 20a4000.gpio: gpio-68 ( |PCIe reset ) out hi gpio-69 ( |gpio-ir-recv ) in hi gpio-72 ( |sysfs ) out hi gpio-73 ( |sysfs ) in lo gpio-83 ( …

Hi, I have Connected i.MX6 Single Board Computer. https://dl.dropboxusercontent.com/u/6943408/ConnectCore/DSCF0496.JPG I need to boot Debian-based system from SD card. I tried a lot of images - without success. Only original Yocto image from Digi.com company boot: ftp://ftp1.digi.com/support/digiembeddedyocto/2.0/r3/images/82003940_C/ccimx6sbc/x11/dey-image-qt-x11-ccimx6sbc-20160811150718.rootfs.sdcard http://www.digi.com/resources/documentation/Digidocs/90001945-13/task/yocto/t_faq_boot_from_usd_yocto.htm but I need Debian-based OS, not Yocto. From dozens of image for other board I have "success" only with http://www.armbian.com/donate/?f=Armbian_5.20…

Hi all, I was an early adopter of cubox-i (and cubox before) By that time I was able to install Ubuntu 12.04.5 LTS server and use my cubox-i to host owncloud, resourcespace, phplist, roundcube and other applications. Now I would like to upgrade (using another sd card) to Armbian_5.38_Cubox-i_Ubuntu_xenial_next_4.14.14.7z Everything seems fine, except the fact that I can't import mysql data from mysql Ver 14.14 Distrib 5.5.54, for debian-linux-gnu (armv7l) to mysql version 5.7 (skip one version is not supported) Do you have any suggestions ? Thanks a lot

This post from February 2025 claims that RP5 and RPMini are supported: https://www.armbian.com/newsflash/armbian-v25-2/ however, I can't find them on the downloads page. I also don't currently own an RPMini, I am tempted to buy one but I wanted to make sure it was supported first. What's the state of support right now?

Please help. We bought a board on AliExpress, but no one provided any documentation. And I can't ask the seller for it. Can anyone share any information? It's very difficult to figure out which pin goes where without documentation on the circuit diagrams. But given my situation, I set up two Ethernet interfaces. I haven't tested them at full capacity, but I can ping from both networks... myd lt527m 16e2d 180 e sx Thanks a lot.

I am using your Debian (wheezy) on a SolidRun Hummingboard-i2eX. uname -a Linux cubox-i 3.14.14-cubox-i #2 SMP Mon Aug 31 19:36:11 CDT 2015 armv7l GNU/Linux In /dev, it looks like there are two IMX serial devices: ls -l /dev/ttymxc* crw-rw---T 1 root dialout 207, 16 Feb 4 2001 /dev/ttymxc0 crw-rw---T 1 root dialout 207, 19 Feb 4 2001 /dev/ttymxc3 I can send/receive data from /dev/ttymxc0 (uart1) by using pin 8 (Tx) and pin 10 (Rx) of the 26-pin header on the board. But how can I access /dev/ttymxc3 (uart4)? Is there a pin somewhere on the board that I can connect to so I that I can send serial input to uart4? Thank you.

I'm trying to work with bluetooth and the existing 3.14 kernel has known problems. I want to get 3.17 or later. Or can I just build this myself with the config forward from 3.14? Where there any other modifications made?

Finally got an UDOO quad Trusty image built. How do I get it out of the virtual environment? Shared folder?

Hello, I am trying to run urbit on my CuBox-i 4×4 and it looks like ARMBIAN 5.25 stable has some kind of kernel config that limiting the memory usage: ./urbit -c mytestcomet ~ urbit 0.4.4 urbit: home is mytestcomet boot: mapping 2048MB failed see urbit.org/docs/using/install for adding swap space I have added a 4GB swapfile but it seems it's not addressable by the urbit process, I also tuned the setting vm.swappiness without any success. Could this be related to the kernel config CONFIG_VMSPLIT_2G? Details: ---- Kernel setting cat /proc/config.gz |zcat |grep -v "^#" |grep VMSPLIT CONFIG_VMSPLIT_2G=y top top - 20:24:55 up 4 min, 1 user, l…

I flashed my uSD card with armbian ubuntu desktop and works fine, until I do an apt upgrade. After that, I always see a boot message saying: Unable to handle kernel NULL pointer derefence at virtual address 00000010.... Internal Error: oops: 17 [#1] SMT THUMB2... etc etc If I try doing startx, I see something else... (EE) modeset(0) failed to initialize glamor at ScreenInit() time. .... AddScreen/ScreenInit failed for driver 0.

Are there any other Mekotronics R58 mini users out there? I like this box a lot and Armbian runs great on it, I would very much like to share expereriences with other users and learn from each other. At this point Armbian is downloadable for this board on this site. And it has recent updates too. Some specs: I have the Mekotronics R58 mini plastic version (there is also metal box that has better cooling but same internals) RK3588 8 core Rockchip CPU 4Gb RAM File System transferred to 120Gb SSD with armbian-config Measured it uses 2.1 watt during idle I seem to have everything working except HW acceleration. On the download page…

When I take an image with the camera ( Camera V2 raspberry) with the pygame or cv2 module, I get a green screen. I looked for several documentations to solve this problem but never anything very specific. Do you have any idea?

Hello, I have problem with sata port multiplier. I can't make it work. All recommended changes for boot.cmd made. Any single SATA drive could be detected, but doesn't works via pmp. What else can be done? Dmesg attached. dmesg.txt

What is the baud rate of s905w

I cloned the quite latest version of Armbian: commit 369e69a55390f59c2299c98c09bf3d805ac59335 (HEAD -> main, origin/main, origin/HEAD) Author: Ricardo Pardini <ricardo@pardini.net> Date: Mon Apr 3 13:15:54 2023 +0200 artifact-armbian-bsp-cli: hash more variables included in `/etc/armbian-release` Using the edge branch to compile for my renegade board, which has the rk3328 chip: ./compile.sh BOARD=renegade BRANCH=edge RELEASE=bullseye BUILD_MINIMAL=no BUILD_DESKTOP=no KERNEL_CONFIGURE=no COMPRESS_OUTPUTIMAGE=sha,img It blocks when start to boot the kernel: U-Boot 2022.07-armbian (Apr 17 2023 - 23:29:15 +0800) Model: Firefly roc-rk332…

Dear Armbian Team, I have a BPI M64. all the images for BPI m64 have "Audio Codec" except the armbian image. so i cannot configure my 3.5 audio jack because it needs "Audio Codec" card in alsamixer. i cannot hear any sound from the jack because it needs to be configured with alsamixer over the "Audio Codec" card. there is only sun50i-a64-audio and sun9i-hmdi. but no "Audio Codec". can you give me any solution?

Hi. I am working with an Olinuxino A20 micro, but I have issues with the SPI bus. I hope somebody can help me to find a solution. I used Armbian 23.5 Bookworm with kernel 6.1 In sclk signal i have a pulse before to start the data transmission, I required the SPI to communicate a LoRa module but the pulse before of data generate that doesn´t work the LoRa module. I attached the signals.

U-Boot 2017.05-armbian (Nov 30 2022 - 10:45:39 +0000) for ODROID-XU4 CPU: Exynos5422 @ 800 MHz Model: Odroid XU4 based on EXYNOS5422 Board: Odroid XU4 based on EXYNOS5422 Type: xu4 DRAM: 2 GiB MMC: EXYNOS DWMMC: 0, EXYNOS DWMMC: 1 MMC Device 0 ( SD ): 59.5 GiB Card did not respond to voltage select! mmc_init: -95, time 11 *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Net: No ethernet found. Press quickly 'Enter' twice to stop autoboot: 0 ** File not found /boot.ini ** ## Executing script at 43e00000 Wrong image format for "source" command 12548 bytes read in 44 ms (278.3 KiB/s) ## Executing script at 43e00000 111 by…

Hello, I have an orange Pi i96, and I can't find a USB device. In /dev, I have a serial folder, then by-id in which I have : usb-1a86_USB_Serial-if00-port0 But it doesn't disappear when I remove the USB device ... And the USB output doesn't change whether the device is plugged in or not. Dmedg gives nothing related to usb and lsusb gives this: Bus 001 Device 002: ID 1a86:7523 QinHeng Electronics CH340 serial converter Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub And it doesn't change depending on whether the USB port is busy or not. Am I missing something? Have a nice day I know it's the wrong ta…

Greetings to all; For a few hours now, as of today 2025-05-29 1418 North America/Pacific, I have been unable to update apt, receiving the following two error messages: E: Failed to fetch http://beta.armbian.com/dists/bookworm/Contents-armhf File has unexpected size (2085376 != 51213). Mirror sync in progress? [IP: 23.186.113.5 80] E: Failed to fetch http://beta.armbian.com/dists/bookworm/Contents-all File has unexpected size (44878 != 8029). Mirror sync in progress? [IP: 23.186.113.5 80] I suppose it is possible that the "mirror sync" mentioned is taking a very long time, but this seems unlikely to me. Does anyone have any ideas…

Hi There, I would like to run Linux5 or Linux6 on Jetson nano, display using HDMI-DVI adapter. It worked fine with Jetpack4 (=Linux4). When I boot with armbian/Linux5.10, which is linux-image-current-jetson-nano, the display tells me it is out of sync then I would force the display as 1280x1024@60Hz, since it looks like Linux fb or X11 are trying to use 1280x1024@75Hz, so that I need edid/1280x1024.bin (maybe with video=1280x1024@60) using {linux-source}/tools/edid to maintain the resolution and sync. I tried both of gcc-10 and gcc-9 to build it, but failed with below error: edid.S: Assembler messages: edid.S:274: Error: cannot represe…

Hello, I'm developing a Custom Armbian for the RSB-4411 (the motherboard that uses like the Raise3D E2). For the moment, it's in the experimental phase because I can't get it to boot. It goes CRC-ERROR when I boot into the debug port on my motherboard. Source codes Armbian build: https://github.com/AstromanGaming/build Linux Kernel: https://github.com/AstromanGaming/Linux-i.MX-Fork U-boot: https://github.com/AstromanGaming/U-boot-i.MX-Fork If someone or I manage to make it boot, that would be great! 🙂 PS: I'm new to this community, if I do something wrong, please let me know.

Hi, I'm trying to use desktop community build for Windows dev kit 2023 but it is not working. Current image: Armbian_community_24.8.0-trunk.554_Wdk2023_noble_wdk2023_6.7.0-rc6_gnome_desktop.img.xz When using etcher to flash to usb, it will flash but fail at validation step say "Cannot validate, the image could be corrupt" or something like that. If still use that usb in WDK, it won't boot. The lite version Armbian_community_24.8.0-trunk.554_Wdk2023_bookworm_wdk2023_6.7.0-rc6_minimal.img.xz is still working fine.

Hello good people, I recently started "porting" linux to my Huawei mate 9. Its one of those projects plagued with silly issues and a sad lack of docs and unreliable hearsay. I was hopeful someone may have started something similiar, or maybe commit logs/discussions from when Hikey960 support was added. Ive found commits but praying that maybe more exists. I just have a handful of basic questions, most unfortunately involve things like the android bootloader. Which partitions related to boot can safely be replaced with non signed images, how do i stop fastboot from combining the appended dtb with those in dts partition. Just to give a general sense of what im l…

Hi all, I got my hands on an Odroid XU4 and wanted to use it as a replacement for my RPi 3 for all my amateur radio related stuff. Unfortunately all of the AX25 kernelmodules have been left out of official builds. I have a commit ready to add them back, yet I am not sure what the actual process is to submit a PR. As I understood I need to open an issue first yet I cannot figure out which category this fits in. I attached a patch file for current kernel. Thank You, Geoffrey ax25.patch

Looking for Armbian_20.02.7_Cubox-i_bionic_current_5.4.28_desktop.7z – anyone can share a copy

Good Morning, I am running into an issue when trying to compile an image for a SM8250 device. Most of the process is working fine until it gets to the Grub Section, at which point I get the following error: " cp: cannot stat '/usr/lib/linux-image-6.18.24-current-sm8250/qcom/sm8250-retroidpocket-rp5.dtb': No such file or directory" I have attached the logs, and would love to know if anyone has had a similar issue when trying to build an image for any device, and if so what you have done to solve it. Thanks all in advance for the support

Hi All, Looking for assistance with getting an old SmartQ5 Mobile Internet Device running with Armbian. I was able to locate Github page (https://github.com/tpruvot/smartq-magicsd) which references booting from SD but need assistance getting armbian compiled and configured for the device. Any help is appreciated! SPECS: Samsung Mobile Application Processor S3C6410 based on ARM11 core at 667 MHz/800 MHz 128 MB DDR 133/333 MHz SDRAM 1 GB NAND FLASH (256 MB usable for storage) AC97 audio codec & PCM 24-bit audio SoC graphics unit, OpenGL ES 1.1/2.0, 4M triangles/sec @133Mhz (Transform only) Integrated Wi-Fi 802.11b/…

Hello, all, I am trying to confirm the actual status of UART support on the Banana Pi BPI-R4. Does the hardware UART work reliably and appear as a character device (e.g., /dev/uart*) under Armbian Linux? Also, what is the maximum baud rate supported by this port? And one more question: Does Armbian support the Quectel EP06 modem (LTE, mini PCIe)? Thank you in advance, SY, Serge

Hello Armbian team, I am working with the TQ mba8mpxl-ras314 (i.MX8MP) board and trying to use an LVDS display: AUO G150XAN02.0 (1024×768). I have built Armbian from source using: ./compile.sh build \ BOARD=mba8mpxl-ras314 \ BRANCH=current \ RELEASE=jammy \ BUILD_DESKTOP=yes \ BUILD_MINIMAL=no \ DESKTOP_ENVIRONMENT=xfce \ DESKTOP_ENVIRONMENT_CONFIG_NAME=config_base \ KERNEL_CONFIGURE=no I created a custom LVDS DTS overlay with the correct timing from the display datasheet (65 MHz pixel clock, 1024×768, proper porch and sync settings), and added it to However, after booting the image, the LVDS output still sta…

the current filogic kernel has no info [in github] for where it was forked from, and trying to apply incremental patches from kernel.org I found it contains pieces of 6.14 in an ostensibly 6.12 branch. @chainsx might you be able to divulge where you forked it from?

I don't see it specifically listed, but does Armbian run on the Beaglebone black?

Hi, I'm incurring in a issue with updates of the board to Armbian 26.8. The new kernel or updates break the board connectivity gets lost, since the board boots up, the LAN port blinks but it doesn't set any IP Address. The board works in headless mode with the Debian 13 CLI UFS image, so I can't debug it using a monitor. Has anyone the same issue? How to reproduce 1.Flash the recommended Debian 13 Trixie CLI Image from Armbian Website 2.Start the board normally, in headless mode 3.login with ssh 4.set a new user account 5.Run apt update && apt dist-upgrade -y and then reboot 6.Board…