General Chat

Information in this topic is very outdated see this topic.

Information in this topic is very outdated see this topic. The start system in Coreelec is not compatible with LibreELECE Armbian etc. If you run coreelec on your TV box, you will no longer be able to run LE and Armbian normally until the full recovery of the standard firmware via the USB Burn Tool and the new activation of the universal multi-boot, which is used in all new systems. The new version 5.55 of images. In this version, images with a single DE (XFCE) and a server in composition are as close as possible to the official versions. Version with a Mate and Icewm will probably be later and the gathe…

The start system in Coreelec is not compatible with LibreELECE Armbian etc. If you run coreelec on your TV box, you will no longer be able to run LE and Armbian normally until the full recovery of the standard firmware via the USB Burn Tool and the new activation of the universal multi-boot, which is used in all new systems. Questions that do not specify exact details (the exact image version, TV box model, detailed steps that were performed for DTB settings, and so on) will be ignored and deleted. For all. I don't support s905x3. I don't have this equipment. All messages about this platform deleted. What works or doesn't work from this equipment…

Hi, First I want to say thanks for this amazing project. Also English is not my native language, so please excuse me for misspell Last week I received my shiny new Beelink GT1 with Amlogic S912 CPU. And now I have a itching in my hands to break it. So I forked @150balbes repo and start messing with it. Dowloaded original firmware from here: https://mega.nz/#F!bIVGFaKY!Om3XTxlHmjPB4x2_jukFYw Extracted original device tree and kernel config (attached below) and after little tuning I was able to build a Ubuntu 16.04 CLI image (only build, not tested) I use a LibreELEC linux-amlogic repo. But there …

I try to use image Armbian_19.11.3_Aml-g12_bionic_legacy_5.3.0_desktop_20191126.img for device with S905X3. TV box is called X96 Air. Unfortunately, I can't make multi boot. I've got error: -- Install /udisk/aml_autoscript.zip ... Verifying update package... E:footer is wrong Update package verification took 0.1 s (result 1). E:Signature verification failed E:error: 21 Installation aborted. How I can do it?

Is there a way to add the MXQ box to the armbian supported OS's with nand support? This is a similiar device as the S805 ODROID device and the difference is only that this device has also a nand storage on it.

I opened this theme to support running ArmbianTV on 32-bit ARM models. To date, there are first results on launching ArmbianTV on the Rockchip rk3288 and AML s8xx platform (in the future, by analogy with aarch64, I plan to switch to a common image for all 32-bit models of TV boxes). The link to the images https://yadi.sk/d/85ZvBuXyyenf_A MEGA (name -rk3288) https://mega.nz/#F!j9QSDQSQ!6WpasOlbZYIInfw6yo4phQ Now you can download the latest versions of images and DEB packages from the official Armbian resource via the link. https://users.armbian.com/balbes150/ Recommended startup pro…

To start the system enough to download, unzip, burn the image to the SD card. Connect the SD card to the EDGE and turn the power on. The system starts automatically. Details on the initial setup of the running system can be found in these topics. https://yadi.sk/d/ie_dx5x_w2xUIQ https://mega.nz/#F!n1hihSKT!8kYublAPG4RtwSIBihOkVg

Some Time ago I bought a cheap Z28 TV Box fromGearbest for 27€. I was curious about this chip after I saw a Picture of the Rock64 here on Armbian. When I first connected the Box it only comes up with 720p Resolution, far away from 4K at all. Some other things happened, Rock64 was send to Devs and Developement seems to become more and more Stable, so it tried to check Ayufans Android Image on this Box. I got me the Android Tools and flashed the Image to the box on a Windows Machine . Adroid came up without Network, (as expected) but seeing this Image Booting made me thnking of trying the a Desktop Image on this Box. The Android Image can be flashed via An…

[ This thread started more or less here : And what do you think about porting to a cheap Android TVBox ] If anyone's interested we can discuss Armbian or linux for those rk3288 devices here. I'll start with mine (Q8 without front panel) which is the XT-Q8L-V10 from enybox (Chiptrip Q8 on gearbest or that other EKB328 on Aliexpress with front panel). I have a feeling that those boards are discontinued and being put on sale as end of stock. There are various other boxes with rk3288 which prices are pretty high (>80e) and were probably seen at some point as high end boxes. Other threads for that board can be found here…

After all accounts that the S922X is much better than the rk3399 I've got running Armbian as a daily driver, I've decided to take the plunge (on 11/11) with this https://www.aliexpress.com/item/4000268608282.html?spm=2114.12057483.0.0.7f197d9f029O4t If anyone has any thoughts, comments, tips etc, feel free to add to the discussion

Hello, My OS : Armbian_5.44_S9xxx_Debian_stretch_3.14.29_server_20180601 My Devise: X96 mini ( 1 G Ram 8 flash + SD 16 G sdcard ) I want to use hw codec of the aml with ffmpeg So i find https://github.com/roman-rybalko/FFlmpeg-aml/ so i try to compil : AML_LIBS git clone https://github.com/Owersun/c2_aml_libs.git cd c2_aml_libs make all -j4 make install cd .. copy all files from /usr/lib/aml_libs/ to /usr/local/lib (or change the path of the install ) cp /usr/lib/aml_libs/ld.so.conf /usr/local/lib/ld.so.conf cp /usr/lib/aml_libs/libamadec.so /usr/local/lib/libamadec.so cp /usr/lib/…

Hello! I am a novice on this forum. My device is the new (so far) X96 MAX. Now I am preparing to install on it the latest Armbian-ubuntu. My X96 MAX is with S905X2 chip, 4GB of RAM, 64GB of storage, gigabyte ethernet, dual-band wifi adapter. Please help me with some tips for this operation!

Hello Armbian team. 1st I would like to thank everyone for your great work. I've been using a Minix TV box with Armbian 5.41 (kernel 3.14) for many years. Recently I have decide to try Mr. balbes150 build. The system works perfectly from SD, but after installing to emmc the boot process fails to load OS. I would be thankful if someone could point to the right direction. [1] Hardware: Minix Neo U1 ... S905, 2GB RAM / 16GB Flash. Emmc is Toshiba THGBMFG7C1LBAIL (AFAIK same as Samsung KLMAG2GEND-B031). [2] Software: Armbian_20.10_Arm-64_bullseye_current_5.9.0.img.xz Using DTB meson-gxbb-vega-s95-meta.dtb Here is my extlinux.conf: …

Hw Spec Soc: Amlogic S912-H, (S192 with dolby, DTS) Mem: 2G Ddr3 Emmc: 16G 4K HDMi AV out ethernet ?? Wifi/Bt ?? USB port *1 5V DC-IN IR receiver Reset hole OS: Ali YunOS Steps 1, connect UART from mainboard test points, (I can only find M17's UART port) 2, build u-boot follow q200.rst in u-boot doc, use VIM2 config and use VIM2 fip blobs (hope that works) 3, build Arm64 debian bookworm with default debian kernel to USB driver, and config system. 4, falsh u-boot to USB driver 5, connect to device with UART, hope to stop at u-boot cmdline, and erase emmc. if failed, f…

I have a small problem I have quite a lot of sites as well as forum sites visited and find a solution my tv box h6 allwinner see picture. I would like to operate tv box with linux would nice who you may have a few helpful tips have Thank you. ich habe ein kleines problem ich habe schon ziehmlich viele webseiten so wie forum seiten besucht und finde ein keine lösung meine tv box h6 allwinner siehe bild . ich würde gerne tv box mit linux betreiben wäre schön wen ihr eventuell ein paar hilfreicht tips hab danke.

Hi! I bought this box https://it.gearbest.com/tv-box/pp_009329759547.html and now I want to install armbian but stuck on the blue logo at boot. I added in dtb amlogic folder, by searching on the web, the gxm_q2012g_1gbit.dtb because in the folder I can't found... Any solutions?

Hi, a quick start for this TV Box. There are several comments on the 905x3 thread but, for the sake of easiness, I've created this blank new thread. My experience with H96 Max X3: (1) Downloaded (from yandex) and burned Armbian Armbian_20.05.3_Arm-64_buster_dev_5.7.0-rc2-next-20200424_desktop.img (2) Copied the /dtb/meson-sm1-sei610-ethfix.dtb into the SD card and modifed uEnv.txt to load that dtb and uncommented the 'APPEND' entry on aml s9xxx section (3) Made a copy of u-boot.sd into u-boot.ext (4) Booted with 'the toothpick method', armbian started, basic setup, there you go... perfect armbian desktop (5) I did a copy of bo…

Hi guys, I was wondering whether the image for, e.g., the Rock64 can be expected to work also on a TV-Box with RK3328 chipset, for example this one? Cheers, chessplayer

Information for users of TV boxes on the Anlogic platform. At the beginning of the year, I already warned that support for AML will be reduced, now it's time, I completely stop supporting all TV boxes based on AML. Therefore, for those who definitely need ArmbianTV, I strongly recommend that you no longer buy models of TV boxes with Amlogic chips and switch to using supported hardware. AML support is Available exclusively for several models whose manufacturers cooperate with Armbian. In all new versions of images and the kernel, I will add various security mechanisms that will create serious problems, including hardware problems and hardware failure. Therefore, I s…

Title says all. Please see here my comment (#5) from 1 day ago...can't find a reference on this site: https://www.cnx-software.com/2018/01/24/mainline-linux-on-amlogic-s905-s905x-s912-soc-2018-status-update/ So: 1. Is there any Armbian wiki or update summary that tells us about progress on video acceleration support ( specifically for Kodi video streaming) and Mali GPU hardware support under Ubuntu desktop? 2. Does Ubuntu desktop Armbian distros support SMP multi core processing for this Amlogic series? 3. What does it mean to say, e.g., that a S905X/W Android Box (e.g., A95X, MXQ Pro) supports 4K@60/30fps? Does …

Dears, Can somebody help me to learn how boot process ongoing on s905w (i.e. tx3-mini)? I want to add support for s905 in my project (basically it is build from scratch just enough os for mythtv). My target is to use as much as possible mainline kernel/u-boot/v4l2-m2m etc. So how should I organise sw/scripts to allow booting mainline kernel on s905w? thx in advance!

HI there, I'm a newbie trying to create a specific thread for this TV Box. There is some interesting stuff on the 905x3 thread but I'd rather have a single thread for X96 Air to share owners' experiences and achivements. So, opening the thread here, I'll try now to add anything specific I find about the x96 Air. Please contribute but don't mix with 'similar' boxes. Thanks! Trying to draft a guide based on the other thread notes specific to the X96 Air. dtb with ethernet fix (from ciprian28 post) --> (-- Updated on May 9th --) tried this on the H96 Max X3 and works. Step by step ar…

Hello, I am using mxq pro 4k and the only dtb file that goes untill the end is the gxbb_p200.dtb, so I have installed every thing on the SD card and every thing works very well. Things getting worse when I installed the linux on the eMMC using the ./install.sh script. The installation goes very well, and every thing starts correctly, the only problem is that many drivers behave strangely, So I have compared the dmesg logs from SD and eMMC and many changes were noticed. So I suspected the dtb file to be not the one used in the SD card, so I have extracted the dtb file used when booting from eMMC and compare it with the one used in SD, and I got a ve…

Hi to all, I recently purchased a COOLEME brand tvbox (but internally is marked W95T) with S905W, 2GB / 16GB of memory. The wifi chip is SV6051P. I tried to install ARMBIAN Armbian_5.37_S9xxx_Ubuntu_xenial_3.14.29_server_20180203.img and it works all very well except WIFI. I tried several DTBs, both gxl212 and gxl281, I also tried to modify them but I could not make the WIFI work. I saw that in the folder / lib / firmware there is a subfolder SSV6051 that contains a .bin file and a .cfg but I have no idea how to load them. Among other things I tried to install LibreElec and the wifi in that case works ... But I'm interested in Linux because I intend to use t…

I have tried to boot following images from SD Card - Armbian_5.24_Amlogic-s905x_Ubuntu_xenial_3.14.29_desktop_20170127 - S9xxx_4G_ICEWM_MATE_XFCE_LXDE_LXQT_20170122 Result: HDMI screen remains black. My understanding is that a dtb.img specific to T95Z Plus device must be copied to the FAT partition. I have managed to copy /dev/block/boot from T95Z Plus Android directory and renamed it to boot.img (zipped and attached to this post as boot.img.tz95plus.zip) Then I have downloaded split_bootimg.pl and used it with this boot.img ./split_bootimg.pl boot.img Page size: 2048 (0x00000800) Kernel size: 7419928 (0x00713818) Ramdisk size: 917780 (0x000e0114) …

Hi, new to armbian here! I'm coming from libreelec looking for a less limited operating system keeping mediacenter features of libreelec (mostly kodi) I installed Armbian_5.44_S9xxx_Debian_stretch_3.14.29_server_20180601.img.xz (it boots only versions with 3.14 kernel, others don't work), I found that it has not wifi drivers because it is not working, just eth0 is shown with "ip a". Is it possible that drivers for this box are missing? With libreelec it works like a charm. Thanks in advance!

Hello all! I have one of these (possibly!) a sunvell R69 tv- box (it says R69 on top and has a green line going around it). I did try to check on its built-in android to see what CPU is in this box; I couldn't really find a 100% answer but it is either an H2+ or H3. I did download and manage to get to work one of the armbian images (but I cannot remember which one it was) but then later used the micro sd for other purposes. I then tried downloading the armbian image for the orange pi one (I can't remember if that was the one I chose earlier; I've seen others use this image for 'a' R69 and some say it works) and writing it but my R69 refuses to boot…

this is just a quick note that in my experience the amount of tv boxes with fake specs has grown quite a bit in the last months and that this is something to always have in mind when getting a box for a surprisingly cheap (i.e. quite a bit cheaper than usual or most of the other offerings) price - you might be lucky and it will be a bargain or you might hit one with fake specs. some examples i saw recently: a qplus 4g ram / 32g emmc ended up to be 2g ram and 16g nand, a h6 box sold as 4g ram / 32g emmc ended up as 2g ram / 16g emmc, a x96mini 2g ram / 16g emmc ended up at only 1g ram / 16g emmc, a r39 2g ram / 16g emmc with rockchip rk3229 ends up as 1g ram / 16g emmc and…

Anyone has the following box and managed to find the correct dtb?The box is being sold under "Android 9.0 TV Box A95X Z2 4GB RAM 64GB 2.4G 5G Wifi RK3318 Quad Core..." name on aliexpress and ebay. I tried copying armbian to sd-card and it refuses to boot. I checked various DTBs with no luck. Anyone else got it to work?

I am starting a new thread as this discussion doesn't belong in the "Single Armbian image for RK + AML + AW" thread. The end user need is that users (I think this is especially true of TV box users) think of Armbian for TV boxes like a standard linux distribution. What this means is that they expect to receive security updates and critical bug fixes. They are after all trying to run home servers and desktops on this platform. And for the most part they get these fixes from the upstream distributions (ubuntu or debian). However they don't get fixes for the linux kernel. The question "how do I get kernel updates?" gets asked quite frequently in the TV box …

Hello, i`ve successfully started Armbian_19.11.5_Arm-64_eoan_current_5.5.0-rc6_desktop_20200127 on my A95X F2 device with meson-g12b-odroid-n2.dtb. I know that it is not correct dtb which i should use for my box, but it is the only one that worked. If i use meson-g12a-x96-max-rmii.dtb i get stuck on this: http:// I also have got the original android dtb file. But i dont know how to add it here.

Ayufan’s Armbian on a V88 Piano or V88 Mini III These two TV boxes seem to be electrically identical except that the V88 Mini III has 2 GB RAM and 8 GB ROM whereas the V88 Piano has 4 GB RAM and 16 GB ROM. They use the same PCB as can be seen from the photos in these FreakTab topics:- - http://freaktab.com/forum/tv-player-support/rockchip-based-tv-players/rk3328-devices/681869-scishion-v88-piano-tv-box-rk3328-4gb-ram-16gb-rom-android-7-1-usb-3-0-fast-lan - http://freaktab.com/forum/tv-player-support/rockchip-based-tv-players/rk3328-devices/663248-scishion-v88-mini-iii-tv-box-rk3328-2-8gb-2-4-wifi-fast-lan I do not have a V88 Mini III to te…

@SteeMan i want to learn how to compile u-boot from source and use it like balbes did in his armbian boot directory.like how to build the u-boot.ext, boot.ini, aml_autoscript and soo on

Hi, After running armbian-install on S905x device it stopped booting. USB Burning Tool doesn't recognize the device, nothing. After connecting to UART it looks like install script has overwritten the original u-boot. That's the boot log from UART connection without sd card: GXL:BL1:9ac50e:a1974b;FEAT:ADFC318C;POC:3;RCY:0;EMMC:0;READ:0;0.0;CHK:0; TE: 104174 BL2 Built : 11:58:42, May 27 2017. gxl gc3c9a84 - xiaobo.gu@droid05 set vcck to 1120 mv set vddee to 1000 mv Board ID = 1 CPU clk: 1200MHz DQS-corr enabled DDR scramble enabled DDR3 chl: Rank0+1 @ 912MHz - PASS Rank0: 1024MB(auto)-2T-13 Rank1: 1024MB(auto)-2T-13 DataBus test pass! AddrB…

Hi! If start with g12a-x96-max.dtb ethernet works and no sound, with sm1-sei610 no ethernet and sound works. I tried to exchange sections of dts files between version (two way), but when I use DTC to convert to dtb, so many conflicts of phandle address already used. How to solve?!

Can armbian run on MINIX NEO U9-H? U9-H Specs CPU: AArch64 Processor rev 4 (aarch64) Hardware: Amlogic GPU: Mali-T820 OpenGL vendor: ARM OpenGL version: OpenGL ES 3.2 v1.r11po OS: Android Version 6.0.1 API: Level 23 Kernel: Linux 3.14.29 Build U9-H FW007A 20171020 If it is possible, please instruct me on how it is done... Thanks, rbiam57

Hello. I have an error when trying to upgrade the kernel root@jdm:/boot# apt upgrade Reading package lists... Done Building dependency tree Reading state information... Done Calculating upgrade... Done The following packages will be upgraded: linux-image-aml-g12 1 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. 3 not fully installed or removed. Need to get 0 B/27.2 MB of archives. After this operation, 31.3 MB of additional disk space will be used. Do you want to continue? [Y/n] Reading changelogs... Done (Reading database ... 53286 files and directories currently installed.) Preparing to unpack .../linux-image-aml-g12_5.99_arm64.deb…

Ok, I updated the boot manager so it is now more portable and added some convenience features as well. Be aware that it is not beginner friendly, you need at least some knowledge about writing and editing u-boot scripts, Uart cable is not needed but can be useful during testing and setting up. I rewrote the script in python using curses so It's now more elegent (in my opinion anyway) I tried to get it as close as I can to look like grub2 interface: Now let's explain How it works: First, the sdcard must contain at least two fat32 partitions: -First partition(fat32) (label=RECOVERY) content: This partition contains the main boot manag…

I buy a V88 mini 3 (2G ram / 8G EMMC) for make the test of MPP api and use it in ffmpeg. ( because i must wait for the version with amlogic ) 1 Install Armbian 2 Checkp MPP 3 Compile last ffmpeg 4 Test So let's go ...

If you dont need GPIO then you are probably better off looking at TV boxes or boards intended for that market instead of an SBC. That market is starting to see PCIe and USB3 attached 4x4 wifi chips and at very cheap prices. I brought back some dirt cheap RK3399 TV box boards back from China in June with AP6255 (2T2R) chips that perform much better than expected as an AP for upto 5-6 simultaneous clients. I get approx 425Mbps with 1 client, ~295Mbps with 3 clients and ~165Mbps with 6 clients. Thats line of sight in a ring approx 3 meter radius around the AP. I also get 890Mbps on the GB port on boards that cost me about €35 each (¥27500 for 100 boards) ¥275 / …

Hello to all I am trying my best to install Armbian ubuntu server on the above described Android TV box and cannot succeed. has some one been able to make this work? Any hints would be greatly appreciated!

Hello everyone, I am new to the forum and I am trying to convert a TV Box M9X Max (Android 6.0.1) into Mate. Due to a handling error, I erased the Rom from the Box ... I did not find the Rom of the Box M9X Max, but that of the MXQ Pro + works correctly (Android 7.1.2). I'm using the image: Armbian_5.37_S9xxx_Ubuntu_xenial_3.14.29_mate_20171226.img The problems I encounter: - Wifi is not recognized, chip: HS2734A V15628 98MA (Broadcom 4329/30) - I can not write the image on the eMMC: Android restarts in recovery mode - The Box's remote control does not seem to work to turn the Box on and off I browse the net for 2 weeks and I ca…

Yes, I am new to forum. Yes, I searched. But I still have questions. My story: At the beginning of the year (2021) I bought one orange pi zero 2 board at a good price. It was around 18 euro. I am very happy with the small board. So I was think to buy a second one. Turn out due to global chip shortage, the price of the board jump to 27 euro. The price is not attritive for me any more. Then I watched a youtube video. I think a lot of people watch the same video. Armbian install on H6 tv Box. so I bought the 'same' Tv box. Apparently, I did not read the spec carefully. The model I bought it is not with H6 CPU, but with H616 CPU. Yes, all the steps wh…

Just wanted to report that I have been experimenting compiling the kernel for Oleg's various Armbian images for S9XXX TV boxes and have managed to compile and boot mainline kernel, but this required a small change in Oleg's S905_autoscript in /boot. Basically I just added a couple of lines that bootm the uImage if it is present. If there is no uImage it proceeds to booti Oleg's zImage: setenv boot_start_ml bootm ${kernel_addr} ${initrd_addr} ${dtb_mem_addr} if fatload mmc 0 ${kernel_addr} uImage; then if fatload mmc 0 ${initrd_addr} uInitrd; then if fatload mmc 0 ${env_addr} uEnv.ini; then env import -t ${env_addr} ${filesize};fi; if fatload mmc 0 ${dtb_m…

Hello, I have installed Buster version on the eMMC of my X96 Air (4/32 Go). And unfortunately, no WIFI due to some errors with the Wireless chipset RTL8822cs (my report HERE) I have found this discussions about this driver: https://askubuntu.com/posts/1067500/revisions But the last version is 5.6.1 for kernel version (https://github.com/cilynx/rtl88x2bu) and mine is 5.7.0. Do you think that I can try this solution in spite of this ? Thanks in advance

I am thinking of buying the Alfawise H96 Pro+ TV Box ($67.99 USD). It has 3GB Ram / 32GB internal storage (some used for Android etc.) It has an Amlogic S912 Octa Core CPU. http://www.gearbest.com/tv-box-mini-pc/pp_503487.html I started looking for a mini PC after a recent trip. From some destinations you have to stick all electronic devices in the hold. I'd prefer to leave my laptop at home in such a case. Another motivation is that these TV boxes are easily hooked up to TVs (duh!) which most people have in their homes. I have been having a lot of discussions with people I meet. It would be handy to have documents, videos, quotes, not…

Since I originally wrote this post Ive re-written bits and included quick videos to guide you through the steps (My original post is still below). As Im writing other posts on other topics related to Armbian, but not relevant to install/setup, Im keeping them all on my new site, so all my updates will be on there. Id welcome any feedback (drop me a comment on here or on https://www.OnDROID.net). Also, if anyone has any specific topics they want me to take a look at, let me know. As always, thanks to balbes150 for his work getting Armbian on ARM boxes. Index of Articles https://www.ondroid.net/armbian-os/ Youtube playlist for the vi…

This is a quick notes post for people that want to setup Armbian on AlfaWise H96 Pro+ eMMC and use it as a Headless Server for Docker Microservices Thanks to @balbes150 @guidol and @Jeycop and all the awsome people of this forum Tech stack used Armbian - Java 8 - Docker - Spring Framework/Boot 2.0 - Node Js - Aurelia Freamework Download Files - Android firmware (Optional, required in case of revert from eMMC flash) - New H96 Pro Plus 7.1.2 firmware download By EBox - Armbian Version Armbian_5.41_S9xxx_Ubuntu_xenial_3.14.29_server_20180305.img …

We are currently at a breaking point where cheap Android TV boxes become powerful enough and viable enough to do the following while running Linux: 1. Be a server: self-hosting data, fediverse, home NAS 2. Be a TV box: 1. web browser, 2. other multimedia options, 3. games 3. Be a makeshift PC replacement (run office applications, photo editing, etc) Concerning #1: If you have followed the news then you have witnessed that censorship is increasing and that the nature of it is most alarming. Over the next years, big tech and politics-driven manipulation of online information will only get worse, until the internet essentially devolves int…

Linux 5.10 ARM64 Has A "8~20x" Performance Optimization Using 20201123 (kernel 5.10-rc4) now. Doesn't feel 8-20x faster, maybe benchmarks will show

The latest libgl1-mesa-dri upgrade brought with it panfrost to the desktop

Hello, I have compiled the kernel and bootloader from: https://github.com/150balbes/build It generates *.deb for uboot, kernel and dtb files , i downloaded those file to my ubuntu installed os on my sd card, then I have run dpkg --install *.deb files and rebooted, when rebooted the box won't start, even the LED is not lighted !? , I have tried to make hard reset even I have removed the SD card and made a hard reset , the box won't start at all. I think when I have run the dpkg install command it wrotes the bootloaded into /dev/mmcblk0 which is I guess the internal emmc file. Is there any thing I could do to deblock the situation. …

In the new year, I plan to focus on improving and developing Armbian-TV (Armbian-TV is a version that is based on the official Armbian, aimed at improved support for media capabilities and ease of use by ordinary users) support for the platforms Rockchip and Allwinner (perhaps a few more platforms will be added that are not yet in use). To do this, I have already ordered several popular models based on rk3399 (NanoPC T4, RockPi 4, Renegade-Elite), in a complete set with obligatory Support of nvme carriers (I consider this support essentially important, for transition of TV boxes and SBS to the category of mini-PC, as highly effective and improved replacement of the usua…

I have a dead H96 Max, S905x3, 4GB/128GB. After an apt upgrade and reboot it never came to life. I use the Single Image, boot from eMMC. WIll not boot recovery either (pin in audio slot pressing the buttin). Red LED is on. fter 5s or so TV stops saying no signal and goes to an almost dark screen that becomes black. Also tried with SD card, with and without recovery button. Guess a hardware issue ? Will I get anything usable from soldering a serial port connection ? eMMC is marked SDINAFF4-128G, made in Taiwan, so possible a Sandisk quality component. But they etched the brand name away. Most annoying is that I lost all the data, was…

Hi Guys, i am owner of this box and i wanted to ask you if anyone is intressted in getting armbian running on it. Dissasambly does not look to be a big problem. and here are som pictures: https://forum.freaktab.com/forum/tv-player-support/allwinner-tv-players/679476-beelink-gs1-6k-tv-box-allwinner-h6-android-7-1-bt4-1-1000m-lan-usb-3-0-media-player-2gb-ram-16gb-rom from the pictures i cannot tell were the uart pins are, anyone can ? from user froezus post Hi, I have tried to boot the OrangePi One Plus image on my Beelink GS1, but either the UART is bad configured or I have damaged the TXD p…

Hello community, I wonder how Armbian could run on this (now dirt cheap*) Mecool M8S Plus W Android 7.1 TV Box (Amlogic 905W) which doesn't have a microSD card slot or even ethernet. *Did I say dirt cheap? Around $18 shipped for the 2GB/16GB RAM/ROM sounds cheap - doesn't it? See here for more information: https://www.cnx-software.com/2020/01/22/mecool-m8s-plus-w-tv-box-sells-for-less-than-15-promo/

M9Plus 4k TV Box - An Exercise in Futility? My apologies for the verbosity of this post. I have an Android box marked M9 Plus 4k on the top. It was given to me, as a gift. There are no other markings on the box, and the user manual that came with it is all but useless. There is no web site listed, and no way to find out who made the thing. Tech specs are listed below. After playing with the Android and a bunch of apps from Google, for about 3 months, I finally got around to doing the sensible thing, and switched it over to Linux. Specifically LibreELEC. The only issue was the dtb.img file for the 1G Ethernet did not work pro…

Greetings. I just entered this hobby tonight and read up some on amlogic boxes in these forums. Im trying to boot armbian to a A95xF3 air with the amlogic s905x3 chip off a SD card but hangs at error message "fail to map file in aml_autoscript". I guess I have the wrong dtb file configured in ext-linux, I have not tried all dtb files yet but now I have wasted so much time so I try to ask here if there is any easy way booting the amlogic s905x3 chip. There is a couple of youtube videos using files for Rk3399 from 2019 and perhaps they might work as Im not lucky with the last posted ubuntu 20.20 images ? I did read there is security issues with t…

Hello, I am looking for a cheap SoC (less than 15$ per SoC) that has the most efficient HW based h.264 encoder. I want to transcode multiple 1080p (6-12 mbps bitrate source) TS streams. I will probably use couple of those SoC's. I was reading about Allwinner V3S (~3$ per CPU) based SoCs but can't find any cheap one for sale based on that chip. Also I don't really know what kind of performance this cheap have for HW h.264 encoding. Anyone have any experience with HW 1080p encoding on SoCs? Any suggestions?

These days I am playing with an inexpensive ($25) Amlogic S912 TV box that I managed to get Oleg's excellent Armbian Ubuntu 18.04.2 image 5.75 with Linux 4.20.5 kernel running on. For the moment it has shown excellent stability and performance. I am attaching the results of running sbc-bench by Thomas Kaiser on this diminutive Linux box: it beats just about every other SBC except the RK3399 SBC's, and even matches or is faster than these in some cases. However the best part is that it is running a mainline up to date Linux kernel, not some heavily patched vendor kernel from a couple of years ago. Right now I am running the more extensive Phoronix Bench…

hi, I am considering getting a couple of inexpensive tv boxes to play with, my goals in order of interest would be: - Test Linux running some monitoring bash scripts. - Test Linux running some lan services as PiHole, nginx service fallback static pages for a couple of domains. - Test Linux acting as a thin client to RDP servers (think LTSP). - Test Android acting as a thin client to RDP servers (think LTSP). I don´t intend to run all of these at once, but rather test how well those work (or not). I am leaning towards TV Boxes instead of SBCs for the "all in one piece" factor, with SMBs getting the board+case+PSU+wifi-dongle rapidly see…

I installed recently on GT1 ultimate (S912) Armbian 20.02 RC1 Buster downloaded from https://yadi.sk/d/_rQgn_FosYuW0g/20.02/20200205 based on 5.5 rc6 kernel. I deactivate X, stopping more all less all unnecessary processes, with the goal in mind to have as few running processes as possible. The goal was to run an apache server on it. However without apache running, and in idle state (running top confirm that no processes are eating CPU) the temperature was in range 0f 56- 58 Celsius. Same hardware but with an older armbian image Stretch (which I could not found on web anymore) based on 4.20 kernel in the same instalation software, the temperature is somewher…

Hi, I'm trying to build a kernel for my tv box (kii pro) , but the resulting kernel doesn't have framebuffer or mmc drivers, first i tried to build the kernel from this git repo https://github.com/kszaq/linux-amlogic-le but not mmc devices or framebuffer then tried to build two versions of buildroot directly from amlogic site http://openlinux.amlogic.com:8000/download/ARM/filesystem/buildroot-openlinux-20170310.tar.gz http://openlinux.amlogic.com:8000/download/ARM/filesystem/Linux_BSP/buildroot_openlinux_kernel_3.14_fbdev_20170527.tar.gz unfortunately i can't build the dtbs that came with them (i get syntax error) basically i …

Hi! Does anyone using GPU acceleration in S905X3? Have any tutorial?

Hi, I search for a new development the best tvbox for run armbian, docker and microservices if possible around 100$ with 4GB Ram or more and 64 or 128GB eMMC. The display and wifi are not important, we run nodejs services only, so only cpu and eMMC performances are important for us. I have see a topic where balbes150 advises the ugoos AM6. I search a powerful tvbox for Linux usage. Thanks for your help

Hello all, I need some help. I have a Beelink GT1 Mini TV Box 64GB Gigabit Lan 4 GB Ram. I use this stock firmware: v007P0 stock firmware LPDDR4 version (SN: 95X2) for Beelink GT1 Mini TV Box from here. https://beelink-my.sharepoint.com/:u:/g/personal/firmwareservice_beelink_onmicrosoft_com/EQ8GFfRPJopFoKLfJt71qyMB7ZuofgTb_L3_VW3CHO2g2g?e=Hq70yf https://chinagadgetsreviews.com/download-android-pie-9-v007p0-stock-firmware-for-beelink-gt1-mini-tv-box.html I am trying to flash Armbian_20.10_Arm-64_buster_current_5.9.0.img.xz using the meson-g12a-gt1-mini-a but I get the error here-below: I have tried all other meson-g12a with…

Hey guys, I'm looking for a pretty budget TV box under $50, I really don't need much from it but here are a few things that are very important for me: Speed - I've had experience with super slow smart TV devices in the past, generally a cheap smart TV is simply pure sh*t. So I don't really need anything that should be capable of gaming, I'll probably never use that, but I do want the TV box to operate fast. Outer storage ability - Probably the most important thing for me is a device that will be able to hold up external storages(flash drive, SD card, HDD(?)). I believe I've seen some TV boxes that only support up to 64GB of SD card, I would really lo…

I have recently purchased a Linux-based TV box with the following specifications: Realtek chipset with the code RTD1395PU 1 GB of RAM (SEC 149 model) 8 GB Flash memory (SCY brand) Operating system: Linux Support for 1 USB, LAN, HDMI I have tried connecting the UART interface to it and observed the boot process using Putty. What I received was a boot system that I will describe later. The issue I'm facing is that there is very little information on the internet about this CPU model, and the support for it is similarly scarce, as it seems to have been discontinued. I can use ESC/Space to access Uboot in the Realtek> prompt, but the n…

Hello experts! Yet another person asking for help! (YAPAFH) I have made a purchase of a very cheap Android box with the sole intention of running Armbian on these boxes. I have purchased 3 of them. To my surprise I couldn't find the SD card slot, so opening it up I see the SD card slot is missing, but the footprint is on the board, and looks like the related components were not placed. Is there any point in trying to get Armbian working on this box? Can I load via USB? (with no SD card initially) Thank you in advance for your time! SirRedZ

Source from: https://iridiumbrowser.de/downloads/source Wonder how hard it is to cross compile to Arm?

Hey folks - spend my money... I have a current TV box - Beelink X2 (Allwinner H3 based) getting subscription services for IPTV from Japan via Hong Kong (long story...) - what's nice is that I have not had to do odd things with VPN, etc... Anyways - while the X2 has been a stable box, it's Android is getting old (4.4.2), and perhaps it's time to move on - actually I'm being forced to move on to some degree, as my agent not longer has ability to renew subs for HikariTV, so I'm running out of time Basic Wants: 1GB RAM - minimum 8GB eMMC - minimum 100BaseT (Gigabit is a plus) 2.4GHz 802.11n (stable) is a must, 5GHz 8…

https://dosya.co/irtohgogh4hh/Screenshot_20210917-153104.png.html Always waiting at red and blue lights. Nothing moves. The device does not turn on. How can I animate this device? Which path should we follow? Please help. how can i restore the device Can you help me please :((( I don't know much, I'm new I'm joining you for the first time

Hi Folks; (Tanix TX92) uname -a: Linux aml-s9xxx 5.5.1-aml-s9xxx #trunk SMP PREEMPT Thu Apr 9 17:54:57 EDT 2020 aarch64 aarch64 aarch64 GNU/Linux I need kernel headers to build some out of tree kernel modules such as openvfd but have been stuck for several days. Research / experience has shown that: - lot of obsolete information - old kernels - armbian-config fails to install headers - No correct linux-headers version available for download - ./compile.sh INSTALL_HEADERS=yes does install headers, but issues (forum search) due to WIREGUARD - ./compile.sh INSTALL_HEADERS=yes WIREGUARD=no is required for proper hea…

http://www.cloudnetgo.com/productinfo/138177.html Which of the supported boards can this device be compatible with? Can any of the supported configurations be used to build a kernel for this device ?

Hi Folks, I have an MXQ-PRO-S905 box, branded as an "Antsir" 4k box, 1GB RAM and 8GB ROM using an RTL8189 chipset. I have built the SD card several times using different variations of the Armbian OS (details below). The box is currently running the "Coolio" build, but I want to be able to run armbian from the SD card, however, there is no update options available inside the OS to trigger it to boot, so I manually boot into recovery, the SD card can be seen, but because I dont have a valid file for the recovery bootloader, I cannot trigger it to boot into the environment. Is there anything special I need to be doing?

Hello All! Just got my MINI M8S today and thanks to Armbian, I now have Debian up and running. I used "Armbian_5.24_Amlogic-s905x_Debian_jessie_3.14.29_20170118.img" The only issue I have is that some of the ALSA kernel modules that are needed for MIDI support are disabled in this kernel. Specifically, SND_SEQ_OSS, and possibly one or two others. So I went ahead and installed the "linux-source" package, which matched up nicely with the existing headers. After uncompressing, I copied "cp ../linux-headers-3.14.29/Module.symvers .", then I ran 'make menuconfig', which pulled in the config from '/boot' and I proceeded to enable the pertinent module options with…

hello all i have g18ref andriod box i would like it to flash with linux os can any one tell me what image i should use please. i guess it is same as old mx2 box

I hava a jetson nano and i use Armbian 20.05.4 Buster. I installed a Fan with pwn, but it does not turn. https://wiki.52pi.com/index.php/ICE_Tower_Cooling_Fan_For_Jetson_Nano_SKU:_EP-0113 A command /usr/bin/jetson_clocks should enable the pwm signal. (this is mentioned for nvidia image) How can i enable the pwm signal in armbian?

Hi Everyone, I am having trouble installing kernel headers in order to build and install the neccessary wifi drivers for my rtl8188eu dongle. I have tried installing the headers from armbian-config as suggested elsewhere in the forum but nothing seems to happen. For reference, i am running armbian on an amlogic s912 box. Release: Ubuntu 18.04.4 LTS uname -r: 5.5.0-rc6-aml-s9xxx Error Message: make ARCH=aarch64 CROSS_COMPILE= -C /lib/modules/5.5.0-rc6-aml-s9xxx/build M=/home/***/Downloads/rtlquick/rtl8188eus modules make[1]: *** /lib/modules/5.5.0-rc6-aml-s9xxx/build: No such file or directory. Stop. …

I have a number of headless AML S905 / S912 1GB Ram TV boxes running a bastardised Armbian for systems monitoring. I have a 200MB zram compressed block device setup to store temporary data which gets processed locally then synced to a command server every hour because the eMMC's on these cheap boxes do not last very long under sustained write scenarios. I would like to increase the zram filesystem size to 500MB so I only have to sync daily instead of hourly but because 25% of the RAM is allocated to the GPU/VPU I dont have enough available ram All the devices I have seen seem to allocate approx 250MB for the GPU which is obviously wasted in a headless scenario…

Mornings all :) i was in china for a business trip and i bought 2 android box's called T1BOX , but when i returned to my country egypt i found that it's all with chinese firmware and i am unable to install google play or youtube or any app and cant go to developers mode and also cant root the box , i opened it and took a snap from he mother board as below , tried to reset the box with the reset button with no use as the power do not come up while pressing the button , i got a male to male usb cable and with phoneix i put a firmware but for sorry the box now dont want to power on , can any one support me with a firmware i can flash my box , if now i have another box how ca…

Hello @all. I Have a Nexbox A95X With 2GB RAM and 16GB ROM. Also it has a AP6330 Wifi Chip. What I want to achive, is to have a running Server, as a private Git-Server. I Used a Gog-Server on a Raspberry Zero W, but i wanted to see if I can get a Gitlab to run, and maybe more Server thingies like Webservers etc. I used the Premade "Armbian_20.05.0_Arm-64_buster_current_5.6.0-rc4_desktop_20200320" and got it working. I had to set in the "uEnv.txt" following DTB: # aml s9xxx FDT=/dtb/amlogic/meson-gxl-s905x-nexbox-a95x.dtb APPEND=root=LABEL=ROOTFS rootflags=data=writeback rw console=ttyAML0,115200n8 console=tty0 …

I have tested video playback on: X96max plus (S905x3) TX5 pro (S905x) M96X (S912) -1080p youtube playback from chromium h264ify addon. -Video playback 1080p from MPV in full screen, window mode often lag. On bionic video plays fine from chromium and youtube , but in focal video lags. Testet on kernel 5.7 rc 2 before and after apt upgrade to kernel 5.7.16 Tested on latest focal and earlier versions on focal. No setting are changed Even when running same kernel on focal and bionic the same thing happen (video lag on focal). Why does focal videoplayback lag. What settings are changed i focal ? …

Before I throw this device away I want to make sure I tried everything, The emmc / storage is completely shot, I tried the USB_Burning_Tool to restore the firmware but quickly fails at formating step, I tried the sdcard Burn_Card_Maker which did succed in booting, but quickly fails when showing the Upgrading screen. with nothing plugged in it doesn't show the amlogic logo or any hdmi signal, holding the reset button doesnt do anything either. so my question is can I boot anything with the aml_sdc_burn.UBOOT, I flashed the armbian image and added the aml_sdc_burn.UBOOT to the boot header of the sdcard, but all I get it a black screen (but I do …

Hi I managed to get armbian on my Amlogic S905W device. I'd like to run the whole root fs on an external usb device (ssd). I know how to format it to ext4, mount it, but I can't manage to boot linux on it : I tried to modify the /etc/fstab file, but it seems that it's not the good place ? Perhaps a file in /boot ?

Short Story , dead TV box...no Leds,Lights,output...nothing...but serial console works Any idea of what is wrong =~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2020.10.06 13:20:30 =~=~=~=~=~=~=~=~=~=~=~= SM1:BL:511f6b:81ca2f;FEAT:A0F83180:20282000;POC:F;RCY:0;EMMC:0;READ:0;0.0;CHK:0; bl2_stage_init 0x01 bl2_stage_init 0x81 hw id: 0x0001 - pwm id 0x00 bl2_stage_init 0xc0 bl2_stage_init 0x02 L0:00000000 L1:00000703 L2:00008067 L3:15000020 S1:00000000 B2:20282000 B1:a0f83180 TE: 135603 BL2 Built : 14:57:11, Sep 1 2020. g12a g3c95fed - gongwei.chen@droid11-sz Board ID = 1 Set cpu clk to 24M Set clk81 to 24M Use GP1_pll as DSU cl…

Hello, First, thanks everybody here for making this possible. Second, I am a newbie on booting Linux on TV box, so bear with me. Thanks. My problem: I have a MXQ Pro+ 4k (2GB RAM - 16GB storage - Android 7.1.2 - 64bit) box and have tried most of the recent images for x905s based TV boxes, following the instructions on the first page of this topic. I have a semi-workable result using Armbian_5.37_S9xxx_Ubuntu_xenial_3.14.29_mate_20180203, but still it is not really usable. I wrote this image to USB 3.0 stick and booted after updating via local update on Android. After setting user I can only access desktop after typing ctrl+alt+f1 -> l…

Don't know if this is the correct section, but I couldn't find any info. Googling is confusing since this is aarch64 not x86 Linux ! Inquiries are for generic TV boxes, presumably by @balbes150 1. Does any Armbian distro allow playing videogames including retro? ( Steam now has Retroarch in beta.) b. Can Retro games be installed/run on these S905 tv boxes? 2. Given that Steam Remote Play and Parsec are screen sharing packages, is it possible to stream server installed games to Armbian TV client boxes? 3. How about installing Steam Link/ Proton and/or Lutris? Above are available on Ubuntu Gamepack…

Hi, I am new to this site, so far I have not been able to find a newbie list of what type of hardware to start with. I do not have any device yet. I have been looking at the android tv boxes on amazon, and I want to start with a $30 box, to be able to load linux on it, and have a graphical interface (ie like a Gnome/KDE desktop view) and then be able to install a vnc server, so the device can be controlled remotely. I have two projects in mind: 1. a chromium based browser install, for viewing webpages and playing any videos embedded in those webpages. 2. later on, perhaps with different more robust hardware?, add the capacity to insta…

HOWTO install Armbian_5.32_S9xxx_Ubuntu_xenial_4.14.0-rc2-next-20170929_mate + Wifi on Orbsmart RX-01 / Vensmile U1 / Unuiga S905 (Windows 10) THIS IS DEV. No Support. Tools: 7zip (unpack Balbes FIles form Yandisk), Etcher (Burn unpacked Image to SD Card) Hardware: Orbsmart RX-1 , min. 8GB (Micro)SD Card, (Micro)SDCard Reader 1. go to url: https://yadi.sk/d/srrtn6kpnsKz2/Linux/ARMBIAN/Test 2. Download Armbian_5.32_S9xxx_Ubuntu_xenial_4.14.0-rc2-next-20170929_mate.img.xz 3. Download & Install 7 Zip : http://7-zip.org/download.html 4. Extract with 7zip: Armbian_5.32_S9xxx_Ubuntu_xenial_4.14.0-rc2-next-20170929_mate.img.xz C:\temp (Create Fold…

HI I’ve looked through the whole internet looking on how to burn to eMMc without any external help (monitor or ssh). I want to put an sd card in for it to burn to the emmc automatically. I thought of adding a script in the local or in the /etc/init.d that goes like this: sudo dd if= of … and then when it boots from the sd card it will clone its contents to the emmc. Any help on how someone goes about doing this woud be great.

Hello Guys , I have ordered Micro SD Card Breakout for Exporting UART and JTAG Pins to get serial output on the SD card port without making any welding on the box. I have test it and it seems to work. The problem is that the output is some king of unreadable characters. I don't know whether it is a config issue or something else ? Does any one have used the UART over SD port ? Thanks,

Hello Guys... I would like to install home assistant on this boxes soo i need armlinux to install it ... does anyone know how to install it on this box with this chip ? Thanks in advanced ..

Variants of alteration of the cooling system. For example, three models MVR9 (rk3328), MX10 (rk3328) x96mini (s905w). In the body, above the radiator of the processor, a large hole is made and on the sides of the body a large hole is made for the free passage of air. On x96mini had to add a new radiator. Note need necessarily two holes, one for air intake, the second for exit. This is a very common mistake TV box manufacturers, they sometimes make only one type of holes, which is not enough for the normal operation of the cooling system. The air must pass freely through the body. The direction of air supply for TV boxes is optimal from the hole on th…

Hello, I have read a lot to get panfrost ins a s912 tv box, but always with same result... llvmpipe. I don t know how to make it works... I have a H96 pro plus 3GB 32GB, S912. I tried with a lot balbes150 images, Single Armbian image for RK + AML + AW and S9xx images. Now with 20.5.2, 5.7 focal. malloc@arm-64:~$ inxi -F System: Host: arm-64 Kernel: 5.7.0-rc1-arm-64 aarch64 bits: 64 Desktop: Xfce 4.14.2 Distro: Ubuntu 20.04 LTS (Focal Fossa) Machine: Type: ARM Device System: Amlogic Meson GXM (S912) Q200 Development Board details: N/A CPU: Topology: 8-Core (2-Die) model: ARMv8 v8l variant: cortex-a53 bits: 64 type: MCP MCM Speed: 15…

hdmi.sh ? Will someone help me by telling me the parameters of hdmi.sh ? I use Armbian_5.44_S9xxx_Ubuntu_bionic_3.14.29_mate_20180729.img.xz my box is KM8P (S912)

Hi, I followed a standard guide to install docker on Ubuntu 20.04 https://medium.com/@Grigorkh/how-to-install-docker-on-ubuntu-20-04-f1b99845959e everything went fine until I tried sudo apt install docker-ce which suggested I try a amd64 specific version: Reading package lists... Done Building dependency tree Reading state information... Done Package docker-ce is not available, but is referred to by another package. This may mean that the package is missing, has been obsoleted, or is only available from another source However the following packages replace it: …

Hi Balbes, I am M-tech student and trying to do R&D on S905 image. I need the remmina-next plugin for ARM-64 board. Please try to make it for me. So, that I can continue my research. Also, I have try to modify the S905 image with the help of my senior then I am getting S905 black Xorg. Can anyone guide me on this that would be a plus point to my work. Please reply to me ASAP as I have to give update of my work in this week earlier. Thankyou !!!

can someone please help the idiot (me) to install armbian into internal emmc ? there is no /dev/data device so install.sh doesn't work after reboot from android or even after two or 51 reboots. what i did 1. made micro sd with etcher and Armbian_5.44_S9xxx_Ubuntu_bionic_3.14.29_server_20180729.img. as i can see 3.14 kernel is the only kernel that works with my meecool. 2. copy gxl_p281_2g.dtb or gxl_p212_2g.dtb to sd's root into dtb.img 3 run update with aml_autoscript.zip from android 4. reboot to armbian booted from sd. make new user and so on. ethernet works. 5. reboot again 6. run install.sh that fails with no /dev/data …