Beginners

HI folks, I wonder how to do that.. it's that simple. on RPI OS is just ctrl + alt + F4, maybe here is more complex.

How to take full backup like clone...from emmc for next installation

Device rk3399 I have installed Waydroid and installed an application to watch videos But some of the videos were found to have issues (Does the playback speed increase like frame skipping? The sound has also changed) Because I don't know if it's a GPU issue with the firmware itself or if it's caused by not using Waydroid,So I want to know how to test whether GPU is used in Linux Did the installed Waydroid use GPU

Hello, I would like to tinker with a wayland-based desktop environment. What are the basics I need to know and what are the steps to setup it on armbian? Thanks in advance

Hello. How did you turn it off? I have Armbian installed on eMMC and the task is to write as little as possible on eMMC. How to disable all logs. Actually everything.

Hi All I am using Banana Pi Zero. I have installed the Armbian OS in the SD card. Log In working successfully. I want to enable the UART in the Banana Pi Zero with Armbian OS. I want to get the internet connection using GSM module with UART. If you have any appropriate link for this plz message me. Command Output: 1. root@mintboxlite:~# uname -r 3.4.113-sun8i (Kernel Version) --------------------------------------- 2. root@mintboxlite:~# cat /etc/armbian-release # PLEASE DO NOT EDIT THIS FILE BOARD=bananapim2zero BOARD_NAME="Banana Pi M2 Zero" BOARDFAMILY=sun…

How to unbrick the system? When something goes horribly wrong and you can not boot the system, this is the way to proceed. You need some Linux machine where you can insert SD card failed. With this procedure, you will reinstall the u-boot, kernel, and hardware settings. In most cases, this is enough to unbrick the board. You should check the file system before mounting: I do not understand

Hi, I need to use the MPV option --record-file and notice that the repository 0.14 version doesn't have this. What's the best way to update to the latest version of MPV? I'm using MPV on legacy Armbian (Xenial) due to it's stable multimedia features on my H3 device. Thanks

Hi i use a few years a odroid n2 and xu4. Works great, only with both boards i have trouble to upgrade to latest version. Every time i need or must upgrade i brick my board. Solution new install... So can some one tell me please, how i can upgrade to latest stable version of armbian, without, brick my system.. ___ _ _ _ _ _ ____ / _ \ __| |_ __ ___ (_) __| | | \ | |___ \ | | | |/ _` | '__/ _ \| |/ _` | | \| | __) | | |_| | (_| | | | (_) | | (_| | | |\ |/ __/ \___/ \__,_|_| \___/|_|\__,_| |_| \_|_____| Welcome to Armbian 21.08.8 Focal with Linux 5.10.81-meson64 No end-user support: built from trunk System load: 1…

Hi, I installed more than one year ago pi-hole on a Orange Zero, since two/three month the admin panel of pi-hole remind me that there is a new pi-hole version available. I cannot figure out which is the correct way to upgrade it. Will the upgrade be released as a package through the armbian apt repository? I mean, will I get this upgrade with apt-get upgrade sooner or later? Are there other ways to upgrage it? Thanks.

Hello, I want to setup a Orange Pi 5 Plus to use a PCIe GPU to run games with. I can see that the GPU card is detected in lspci, but am not sure how to switch to it. I do have multiple old and new cards I can try if needed. Any advice would be appreciated.

I have a Nanopi R2s but this is generic to most boards without an inbuilt battery backed RTC. I have added a battery backed 1307 module on the I2C bus and gone through the process of getting it recogised and used. As far as it goes that's fine. The problem is the RTC is only read late in the boot process so the first part of the syslog record has incorrect date and time. Is there any way to force systemd to process the 1307 at the very start? I tried hacking the non-battery backed RTC script but it didn't take. Another option is to get the pre-systemd processes to read from the 1307 and set the inbuilt RTC before systemd starts using it? …

Hello, I am a green hand of using armbian and also the development board. However, I want to use a 2.8 inch ILI9341 screen to show the zsh (desktop). I have read some articles and disscusion about this, however, things seem to be different when I want to deal with it. I even don't know how to add the overlay because there is no such a directory. Should I create it by myself, or I should use some command? I really hope some one can help me, thanks This is my environment Linux nanopik2-s905 6.1.30-meson64 #8 SMP PREEMPT Wed May 24 16:32:53 UTC 2023 aarch64 aarch64 aarch64 GNU/Linux

Hi. I'm trying to use microusb port as additional usb port on OrangePi Lite. uname -a Linux orangepilite 5.4.31-sunxi #20.02.11 SMP Thu Apr 9 21:47:57 CEST 2020 armv7l armv7l armv7l GNU/Linux I've tried enabling usbhost0 in armbian-config and modify sun8i-h3-orangepi-lite.dtb as described here: In both cases I have no power on microusb port. What am I missing? Thanks Christian

I've already benchmarked a computer-interactivbe task (like image processing) on the Orangepi 5 plus's processor——and it wrapped up in just 40 minutes, which is impressively fast. Therefore, I' like to try the NPU. Anyone know how to tap into its NPU for AI workloads?

I use the serial library but when I import it. it will show an error. why? File "test.py", line 1 SyntaxError: Non-ASCII character '\xe2' in file test.py on line 1, but no encoding declared; see http://www.python.org/peps/pep-0263.html for details when i change coding, with the following code, it has the error again # coding: utf-8 how can i solve it??

Hi everyone, have any of you ever used the orange pi GPIO inputs to use as SATA inputs, so you can use HD's? if so, what procedure to take?

I could set up the `armbian/build` repository to compile the kernel for my board. I would like to compile an out-of-tree kernel module on the host machine and copy it to the target machine. I understand that my target machine (Nano Pi Neo Air) has enough resource to compile the module but I just want to try this out. I built the kernel with the following command: ./compile.sh BOARD=nanopiair BRANCH=current KERNEL_CONFIGURE=prebuilt KERNEL_ONLY=yes CLEAN_LEVEL="" KERNEL_CONFIGURE=no CLEAN_LEVEL= KERNEL_KEEP_CONFIG=yes BUILD_MINIMAL=yes BUILD_DESKTOP=no EXTERNAL=no The problem I encountered was that the kernel source (~/build/cache/sources/linux-mainline/orange-pi-5.1…

I tried setting SKIP_BOOTSPLASH=yes from Hidden options for advanced users of the Build Options page, but the Armbian splash screen still appears. Since I have to ask here, I am obviously not an advanced user. 🙃 How do I eliminate the boot splash screen as I am building/testing images? ./compile.sh \ BOARD=visionfive2 \ BRANCH=edge \ RELEASE=lunar \ BUILD_MINIMAL=no \ BUILD_DESKTOP=no \ KERNEL_CONFIGURE=no \ SKIP_BOOTSPLASH=yes \ CARD_DEVICE="/dev/sdb"

root@nanopct4:/boot/overlay-user# armbian-add-overlay lcd-mipi-opi4.dts Armbian is not installed properly. Missing armbian-release or armbianEnv.txt I found 22.08 using extlinux.conf instead of the legacy set of boot.scr + text files. That will miss overlay function when using extlinux ?

How use csi ov5640 with OrangePi Pc ? I install Armbian Focal mainline based kernel 5.10.y from https://www.armbian.com/orange-pi-pc/. I use board OrangePi PC with H3 soc. How to run camera ov5640 cis. How config kernal files? Thanks for reading and answering.

Looking for help on how to install either freepbx or elastix on the OPiPC+ running latest Armbian desktop jessie. I was pointed an article awhile back but it did not work and I am by no means an expert! Any and all help is welcome. Thanks

We will be configuring in a mode that allows both NFSv3 and NFSv4 clients to connect to access to the same share. Q. What are the benefits of an NFS share over a SAMBA share? A. This would take an article in itself! But as a brief reasoning, In a closed network (where you know every device), NFS is a fine choice. With a good network, throughput it disgustingly fast and at the same time less CPU intensive on the server. There are a lot of applications that support NFS "Out of the box" KODI being a common example. It's very simple to set up and you can toggle readonly on shares you don't need to be writeable. It only gets complicated if you want to start l…

Hi everyone, I'm trying build armbian with legacy branch and I need apply patch to u-boot config. If I add my patch in userpatches, buid script ignoring it. If I build current branch, patches aplying

i'm needed create software Wireless Access Point with OrangePI PC+RTL8188CU?

HowTo install Firefox in Armbian?

Pls, need tutorial for install samba for accessing samba share in my network (Armbian<->Win7) hardware: Orange PI PC v1.2 image "Armbian_5.05_Orangepih3_Debian_jessie_3.4.110_desktop" i'm install SAMBA after create folder in home directories user /home/myuser/myfiles sudo apt install samba cifs-utils smbclient after edit sudo nano /etc/samba/smb.conf ... workgroup = MEM ... ... [myfiles] path = /home/myuser/myfiles browseable = Yes writable = Yes guest ok = Yes create mask = 0777 directory mask = 0777 ..... after sudo /etc/init.d/samba restart and see this share from windows pc, but I…

Recently, successfully, upgraded from Ubuntu Focal to Ubuntu Jammy. Does anyone know the correct procedure to sort out the apt-key deprecation issue? I've read apt-key(8), but I don't fully understand what I need to do. I think a Linux guru is needed here. 🙂 ~$ sudo apt-get upgrade Reading package lists... Done Building dependency tree... Done Reading state information... Done Calculating upgrade... Done 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. myron@loki:~$ s apt-get update Hit:1 http://ports.ubuntu.com jammy InRelease Hit:2 http://ports.ubuntu.com jammy-security InRelease Hit:3 http://ports.ubuntu.com jammy-updates InRelease Hit:4…

See https://wiki.debian.org/DebianGeoMirror On my install apt-get update yielded device or resource busy, fixed it by changing apt repository to http://deb.debian.org. weird, now it works alright

Is there a way to make armbian find my modem auto? I am running Orange Pi One with Armbian 5.20 Debian Jesse And Orange Pi PC with Armbian 5.20 Debian Jesse My issue is that it finds the flash memory in my modem but not the modem itself i have to manually set it to modem via this command usb_modeswitch -v 12d1 -p 1f01 -M '55534243123456780000000000000011062000000101000100000000000000' Now the OS see it as a modem and i can run command dhclient -v eth1 And it will load up the eth1 and it will work fine. Issue is i have to do those steps after reboot. On my Rasberry device i run Raspberrian and it does all those steps per automatic its plug and play. Am…

Hi, I compiled a kernel for me from https://github.com/SolidRun/linux-fslcfor HummingBoard. How can I correct change the zImage. My HummingBoard don't want to boot this kernel.

Hello, I'm trying to connect hw125 to orange pi r1, but nothing happens. I searched both on the internet and through gpt. The kernel is the latest, I compiled it myself.

Is there any distro out there that has 2D hardware accelerated graphics so you can get a decent desktop experience out of the N2? I've tried armbian and the distro that comes from Odroid, but all of them are sluggish. Maybe I have missed to select some options? I've "just" installed it and tried som different.. window managers? It's a bit confusing. I'm only going to use it for python and golang development in VS Code, maybe some arduino too, but it's unusable with non accelerated graphics. Chromium or Firefox needs to be usable too. I have a feeling there is some kind of 1 2 3 recipe I've missed like install armbian, select this window manager, install this p…

Hi all, I have found that hw acceleration can be achieved with OpenGL, sunxi Cedrus, using old Xenial on 3.4 kernel. Haven't tested yet using OpenGL, but regarding Cedrus everybody was talking about video decoding and didn't see anyone talking about encoding. Don't want to try on old kernels, therefore I'm not using Xenial. Is there a way to get hw acceleration for video encoding on recent kernels (5.10.y) for Orange pi one?

Hello, I saw from other posts that is possible to enable HWDecode for Video on the H3 of OrangePi PC O would love to make mpv or cvlc work with hwaccel People mention to apply the patches of LibreELEC on the Armbian build. But i dont have the knowhow to do so. Does anyone already have done this? any links, tips, guides, tutorials that i can follow Ty in advance and sorry for grammar

Has anyone tried to get a hyperpixel4 screen (GPIO) to work with armbian? Seems easy enough on a raspberry pi but i want to use a orangepi zero 2 and haven't been able to get results. Any help?

I'd like to hear some opinions and recommendations for the use case I'm considering for this SoC board. My experience of Linux was mostly artix to arch to NixOS I'm still a new user around 2 years± on Linux and this would be my first experience with a SoC board. I'd also want to put it in some kind of PC case

Hello kind folk. Hoping someone can help. What's listed below is what gone wrong. Armbian monitor diagnostics dump: http://ix.io/3yOY All I've done is install Armbian, did the 'apt update && apt upgrade' and enabled options to see how will it will work. I'm not sure if I have done something wrong for several DT overlays not to load. I can see it states that (what is an ftd?) base ftds are missing a node and need recompiling. How do I do that? (The analog codec does load. It's the only one that does.) U-Boot SPL 2020.10-armbian (Aug 08 2021 - 14:48:33 +0200) DRAM: 1024 MiB CPU: 912000000Hz, AXI/AHB/APB: 3/2/2 Trying …

I am new to Ambian and am trying to boot up to it for the first time. I have both an Orange Pi 6 Plus and an Orange Pi Zero 3. Using the Armbian Imager, I had no problem finding the images recomended for my units. My problem is that neither of the devices can boot up to the desktop. They will boot up to a text console where I can configure Wifi, root password, intitial user name, and locale. After that, they state that they are starting the desktop or running some script and continue no further. That I see uniform and reliable failure across the images and the devices make me think that I may be doing something wrong. But I cannot find some step documented somewher…

Hello. My image for Orange Pi One has the following build after apt update and apt upgrade ARMBIAN 5.60 stable Ubuntu 16.04.5 LTS 4.14.70-sunxi "sudo systemctl enable resize2fs" does not work anymore Error message says "Failed to execute operation: No such file or directory" "sudo systemctl enable resize2fs && sudo reboot" works on old kernal images @tkaiser could you please advise how to reinstate SD card resize on first boot? Thank You.

After recording and validation, the flash drive cannot be read. The video showed in detail. Help me write the armbian image to a flash card! https://cloud.mail.ru/public/3UD3/3QEMb6SRa https://cloud.mail.ru/public/4V9N/51Ahv5oPL

Hi guys, I am trying to connect my orangePi internet with ethernet cable but nothing works I tried every way but still I have no internet So please help me. Here are the solutions I tried: 1) I open the share settings from Wifi properties and connect the pi to Pc with normal ethernet cable 2)Bridge the ethernet and wifi 3) installed samba in orange pi and I have nothing OrangePi's ethernet leds are running but no internet I have one last solution , buying a wifi module and connect to wifi with it but I have no idea about wifi modules. Sorry for my english.

Good morning everyone, I'm trying to find the script.bin file in my nanopi M1 in order to change HDMI resolution but untill now it has been impossible to find it. I'm using the debian that provides friendlyarm in version 3.4xxx (the one attached to in the page). I've been using all I commands and modes that I know, even show hidden files and nothing I know this is not a conventional linux device (its a development platform with a ARM Alwinner H3 processor in it) but since it has debian jessie, I think somone can help me find where the HDMI config files are. when I use find, it shows this: root@FriendlyELEC:/# find / -name script*.bin root@FriendlyELE…

I did an apt get update and upgrade on my OrangePi Zero and it seems to have just outright stopped near the end. Setting up libssl1.1:armhf (1.1.1d-0+deb10u2) ... Setting up armbian-config (5.98) ... Setting up libssl-dev:armhf (1.1.1d-0+deb10u2) ... Setting up containerd.io (1.2.10-3) ... Setting up sudo (1.8.27-1+deb10u1) ... Setting up armbian-firmware (5.98) ... Setting up docker-ce-cli (5:19.03.4~3-0~debian-buster) ... Setting up openssl (1.1.1d-0+deb10u2) ... Setting up docker-ce (5:19.03.4~3-0~debian-buster) ... It seems to have just stopped there, I'm leaving it for the time being - but I suspect I broke the syst…

i have the Cubietruck and i want to burn to the nand the Vanilla jessie i did it before with lubuntu with phoenix suite and it was really easy i just dont understand how to do this with the raw file can someone please help ?

Hello all, I was setting up a my favorite SBC of all time, the Orange Pi +2E, and I can't believe that I've been so oblivious to this issue for so long, and that there is no easy solution!!! OK, so I'm doing a massive hardware clearout, and I've getting to my OPI's. Part of this hardware clearout is to finish the project I started (if feasible and still useful). I have loads of approx. Intel DC 3000 series SATA drives around 80-200 GB, and I thought these would be perfect "user data" SSD's for each of the SSD's. But then I realized... and my heart sank as I realized this issue is a problem across most OPi boards after consulting the table. …

On Armbian Orange Pi 5b webpage, one can download the latest image with kernel 6.7 Rrc1, not stable. Once the kernel (6.7) is stable, will there be a way to upgrade without reinstalling? Thanks.

Hi.. I Just forgot my password.. can someone tell me how to fix it /reset?

i intend use orange pi one ,only for download all night , but i instal armbian ,and not come download manager ,i need one same as jdownloader to download automated from host sites big games in many parts ,i need sugestions

Hi I am not very experienced with armbian/linux. I have a raspberry pi that is connected to a 4K tv via HDMI. When I turn the tv off and on screen resolution changes to 4K. I need to fix it to 1080p. I searched but couldn't find something I can understand. How can I do this?

Hello! I have [ Oprange Pi plus ]. I need Armbian_20.05.1_Orangepipc_buster_current_5.4.43_desktop.img Please help me! Yours sincerely Leonid

Hello dear developers and visitors to the forum. I have compiled my core for the opi3 board, but I do not know what to do to test my core. There is little information on the u-boot bootloader and I can’t configure it on my kernel, if I replace the vmlinuz-5.4.7-sunxi64 file, the board does not start, u-boot reports that there is no kernel image. I turn to professionals, please teach me how to work with U-Boot.

Hello everyone, I purchased a single board computer and plan to use Armbian for my projects.; Could anyone suggest the best version of Armbian for beginners?? I want to ensure I have a stable and user friendly experience. I am curious about the initial setup process. Are there specific configurations or settings that I should focus on during installation to optimize performance? Also, I am interested in knowing about the community support available. Are there resources, forums or tutorials that you would suggest for newcomers to learn more about using Armbian effectively? Also i have check this; https://forum.armbian.com/topic/27407-complete-headle…

This Android device uses a Linux4.4 kernel. Considering that my nanopc-T3 lacks the functions required by a higher version of Linux, I would like to transplant the 4.14 version of Linux to this Android device at most without the bootloader source code. What's interesting about the device tree? It seems that the kernel provided by the device manufacturer includes some device drivers that are not included in the Linux kernel nativery. will cross-version compilation be a problem? https://github.com/LineageOS/android_kernel_motorola_msm8998

Armbian is community driven open source project. To keep it relevant and up to date it needs maintenance round the clock. This work is done by a small amateur contributor force which was under-powered since early days and it still is. For most basic tasks! Any help is more then welcome. https://forum.armbian.com/staffapplications/ (what do we need) https://docs.armbian.com/Quick_facts/ (overview) https://www.armbian.com/get-involved/ (how-to contribute) https://github.com/armbian (sources for build engine, documentation, scripts) <---- <---- <---- Also refactoring, better wording, code cleanup. General tips: …

Hi! Yesterday i upgraded ugly Chinese linux to Armbian 16.04 LTS and tested h3control on it. All, except daemon installer, worked fine. Now daemon installer had been fixed. I need any help in testing of it on H3/H2/H5 boards with legacy/mainline kernels. h3control - is a headless daemon/console tool to check and control CPU, DDR frequency and built-in temperature sensor via embedded http-server. It distinguishes from Armbian tools (h3's consumption and monitor): It doesn't rely on particular linux distribution. The only prerequisite is a mono. It tested with mono from 3.2.8 (released in Feb 2014) to 5.4 (current stable). It is a web a…

Hi I have here Banana Pi M2 Berry and I want to use it now as web server, plus few more things, ftp, plex, pi-hole and later also for use some sensors on it. What the best the best OS for it? Armbian is always made for Ultra not Berry and most versions make problems 🙄😒😉 The GUI itself is so !SLOW!, maybe the driver for video are also not right? Can someone give me a link to a proper Armbian for Banana Pi M2 Berry ??? Or advice what for alternative OS?

Basically I'm confused I want to download. I need someone's help on this. I looked up the download multiple times and I still have not found it.

Hello folks, This is my first post to the forum. I cannot seem to get my LCD 2004 to work on my Le Potato AML-S905X-CC I went back and forth a few times in armbian-config to enable/disable various items, but as it stands right now, I just have i2cA enabled. The address of my LCD 2004 is at hex 0x27, and I am using GPIO pins 3 & 5 for SDA and SCL respectively, but it doesn't show up in i2cdetect -y 0: root@lepotato:~# i2cdetect -y 0 0 1 2 3 4 5 6 7 8 9 a b c d e f 00: -- -- -- -- -- -- -- -- 10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -…

On my NanoPi Neo Air it seems there is no pull up resistors on I2C (SDA, SCL). Is it possible to enable pull-up on these pins in a DTS overlay (either the standard i2c dtb or in a user overlay)? If so could anyone give me an example of how to do that...I have tried to understand the dts files but failed.

Since I struggled and now it works here is the explanation sudo nano /etc/modules add snd-bcm2835 i2c-dev sudo apt-get install i2c-tools sudo apt-get install python-smbus reboot wget https://bitbucket.org/MattHawkinsUK/rpispy-misc/raw/master/python/lcd_i2c.py sudo i2cdetect -y 1 or sudo i2cdetect -y 0 device should be identified on 0x27 Run the script

Hello, I am trying to get i2c-0 working on my Armbian 20.11.3 Focal with Linux 5.9.14-sunxi64 After I run: i2cdetect -y 0 i see a plenty of dmesg errors: i2c i2c-0: mv64xxx_i2c_fsm: Ctlr Error -- state: 0x4, status: 0x0, addr: 0x77, flags: 0x0 I have enabled i2c-0 in armbian-config, tried what I could but no luck. Can anybody told me what mv64xxx_i2c_fsm: Ctlr Error means please? ls -l /sys/bus/i2c/devices -> lrwxrwxrwx 1 root root 0 Dec 22 13:05 i2c-0 -> ../../../devices/platform/soc/1c2ac00.i2c/i2c-0 The same wiring and installation (with i2c_bcm2708 and i2c_dev) works on Raspberry p…

Hello, I'm trying to use i2c (i2c1, i2c4) with fresh installed image "Armbian_21.05.1_Tinkerboard_focal_current_5.10.34.img.xz". The related overlays seems to be enabled by default: cat /boot/armbianEnv.txt verbosity=1 bootlogo=false overlay_prefix=rockchip overlays=i2c1 i2c4 spi2 spidev2 uart1 uart2 rootdev=UUID=68be20e3-93fc-4c59-95e1-0c534586d070 rootfstype=ext4 usbstoragequirks=0x2537:0x1066:u,0x2537:0x1068:u i2c is enabled by default: i2cdetect -l i2c-2 i2c rk3x-i2c I2C adapter i2c-0 i2c rk3x-i2c I2C adapter i2c-5 i2c rk3x-i2c I2C adapter …

Is it possible to change the baud rate of the i2c driver on twi0? It seems to be running slower than twi1 and twi2 at least probing that bus takes much longer. Also are twi1 and 2 routed out somehwere on the Nanopi NEO I don't see where the pinout is documented.

How is i2c1 and i2c2 mapped on Nanopi Duo? I can configure in armbian-config, but all the Duo pin diagrams only show i2c0.

Hi, Got a bit of a strange situation here. Trying to get H3 I2S working in both playback and capture. Tweaked script.bin and got the I2S0 up and running. Playback in 96K and 192K tested and is ok. Capture though is giving me a headache. When I try to use arecord it does work and generates a wav file but upon playing the file with aplay and although the samplerate (96K or 192K) and channel numbers (Stereo) show ok on screen, the audio result from this recording is always mono and looks that the included samples numer is divided by 2 thus the playback time is shortened accordingly, eg if I record 10 sec, a 5 sec playing time happens. Verified the…

Hello friends, just short question - i2s do supported in mainline today for A20 (Lime2, Cubietruck, Banana etc...)? BR, Alex

Iam a newbie to orangepi 3. I never had experience in doing anything in SBC's before. I was trying to learn to create a home NAS with orange pi 3 and open media vault. I was impressed with orange pi as it was cheap and more hardware. Here is what i did which took me days but ended up in nothing 1) Got success with ssh. Dloaded Armbian bullseye mainline image from armbian website. Mounted it to class 10 SD by Etcher. After finishing, no boot drive on sd card. Shows 'SD is corrupted'. I saw in this forum that after mounting, two files such as kernal and boot files should be present for ORPi 3 to boot.https://redirect.armbian.com/orangepi3/Bullseye_current 2)…

I have an orange pi lite, I want to use the lcd ili9341 3.2 model SKU: MSP3218 touch screen, and how the installation connections I don't know are these jumpers wires in the gpios correct and if possible use the sd card reader in the orange pi uart? I need your help. I be very grateful. The OS is "Armbian_20.02.0-rc1_Orangepilite_buster_current_5.4.14_desktop"

Hi everyone i made a video for the ILI9341 2.4" tft Module check it out

Hello everyone, I recently purchased an ili9488 touch screen for use with my Orange Pi 5, but I'm having trouble getting it to work. I've tried several solutions that I found online, but so far nothing has worked. Specifically, the screen isn't displaying any output when I connect it to my Orange Pi 5, and I'm not sure what steps to take next. https://a.aliexpress.com/_EQaN4gj - That is the screen I bought. For context,I have the latest version of the Armbian operating system installed. I've followed the instructions that came with the touch screen, and I've also tried several different solutions that I found online (including using the fbset …

Im trying to play video on CLI interface. Banana pi M1 im using.I installed VLC, MPV, mplayer but not successful. please help. my video is in pendrive.

Hi, My system has install and setting a lot, wan to read back all of from sd(8GB) card. Actually system capacity around 2GB, using windisk32 to backup image still 8GB So there any way to do image backup and capacity around 2GB. thanks

Hello forum, is it only me, or is the current buster stock kernel 4.14.y for the Odroid HC1 corrupted? https://www.armbian.com/odroid-hc1/#kernels-archive-all It should be: 27ab68e25510b6fa5e751402758db6ca1bcfee45368795fb3472b4fa8c090c1e *Armbian_20.08.1_Odroidxu4_buster_legacy_4.14.195.img.xz the hash is on my side instead: MD5 Checksum: 4095199A99B583A3400BD865585CB2D5 SHA-1 Checksum: 6960F34D33062B75A7C688D45EDFFE0FE0DBB620 SHA-256 Checksum: 06B2DFB35970B06BB69081D9F86EEFF89B1CE806ADF8FD9E628F2E19B4224D93 SHA-512 Checksum: EFACC0B628781FC035D76007EBE0E5C383F90CDBB91B714703F4D83F40C0ECBF273CB6B150EFF22DD78013E0F16FE110…

Hi all! I need to install other packages and make a custom configuration of OS. Can I do at image building time: - Remove Armbian packages - Add other packages - Save configs at location /etc/ - Setup user name + password and Bash profiles

I am building a legacy desktop image for Rock64 and there are a few things I am trying to customize at build time. I modified userpatches/customize-image.sh, but I am not getting expected results. Here are some things I am trying to modify: 1. I want to have the desktop come up in solid black color, no image. I made the following changes to userpatches/customize-image.sh: gsettings set org.gnome.desktop.background picture-options 'none' gsettings set org.gnome.desktop.background primary-color '#000000' But I am still seeing the Armbian image on my desktop. What else do I have to modify? 2. I need to get rid of the…

Hi, Is there anyone who know how to prepare armbian image for TBS 2910 Matrix Arm PC? HW specification you can find on tbsdtv page. - Freescale i.MX6Q, Quad Core ARM Cortex-A9 at 1.0GHz, Vivante GC2000, Quad core GPU, 2GB DDR3 Thanks for help. robert

(sorry for my english) hello!! My problem: can't compile image. I follow step-to-step in official documentation, but it failed in result. And I don't understand why, please help. I do it in Virtual box; Linux version 6.2.0-33-generic (buildd@lcy02-amd64-073) (x86_64-linux-gnu-gcc-11 (Ubuntu 11.4.0-1ubuntu1~22.04) 11.4.0, GNU ld (GNU Binutils for Ubuntu) 2.38) #33~22.04.1-Ubuntu SMP PREEMPT_DYNAMIC Thu Sep 7 10:33:52 UTC 2 Device: nanopi neo air https://pastebin.com/xBrAv8AL - i put here my logs

Hi all I am currently working on my Orange Pi Plus A31s. What I did with your image so far: The image Link for Debian Jessy pointed me to the Banana Pi M2 image. Downloaded it, dd-ed it to the sdcard, powerup, the red led keeps flashing for ever (waited 15 minutes) So i started to wander around the sdcard and noticed the link /boot/script.bin pointing io /boot/bin/bananapim2.bin. But this file was not present. I tried all 3 images, but i was unable to find that file. I copied it over from other project, that did not work. And I copied it from the same folder /boot/bin/orangepi.bin -> /boot/bin/bananapim2.bin with the same result. Can you help me wi…

Hello, Could you please tell me which image does not have netplan? I want to compare how much resources it uses. Thanks

see title, can help setup letsencrypt cron if needed

Here is another unsolved problem for me: I can only get my USB Stick to work if i plug it to to the onboard USB. If i use an USB-Hub ( tried different ones) it is not possible. There is no message coming up with tail -f /var/log/messages. If i try to mount: mount: /dev/sdb1 is not a valid block device I need more than two USB devices, so a USB Hub is important for me. I tried active and passive Hubs and off course different USB-Sticks. What can i do to solve this problem?

Hello, My sunxi_tp_temp always reports the same value (429496576.0). After digging around, it seems like it's not reading the correct registers. According to the H3 datasheet(1), pp 255-258, the thermal sensor base is at 0x01C25000. The data register is at 0x01C25080. Using the mod_mmio.h and sunxi_tp_temp.c as a guide, I wrote a little utility to print the current SoC temp. #include <stdio.h> #include "mod_mmio.h" // improved temperature print utility // GPLv2 int main(int argc, char *argv[]) { float reading,celsius,farenheit; reading = (float)mmio_read(0x01c25080); //celsius = (reading - 2794.0) / -14.882; Allwinner H3 datasheet formula cels…

In need of direct link for desktop download: bananapi M3 I started trying to find it with wiki and links there. Simply, not finding a link specifically for the download and nothing else. I use to use orangepi, debian buster. So i "guess" i am looking for a debian desktop for bpi. thanks.

In need of a download url: orangepiplus2e debian buster; 32-bit.; saving to micro-sd, as in the past. Would like to download all 3 for debian buster 10.5.0: kde, gnome, cinnamon. - "if they exist". I tried the old link I used to download from that worked well: "https://dl.armbian.com/orangepiplus2e/Debian_Buster_Next_Desktop.7z" but 404 now. Would like to know where I could find the checksums too should someone know where they are. Thank you!

I'd like to run usbdux usb hardware with armbian but have no experience so far in building modules. I compiled the current armbian branch form github. But I could not figure out how to compile the comedi drivers and include it in the kernel. help appreciated Thomas

I am building a kali linux for espreso bin. I used the initrd and kernel from Armbian and I already got it to boot without any problem. However during the boot process, when it is using the ramdisk this warning appears. Warning: fsck not present, so skipping root file system I Would like to be able to check root partition during the boot. How could I add fsck to the ramdisk? I also noticed that armbian buster for espressobin have the fsck present on the ramdisk. On my building script I added the armbian respositories for debian buster and installed: linux-dtb-next-mvebu64 linux-image-next-mvebu64 linux-headers-next-mvebu64 …

After the update, the welcome screen shows Armbian 24.5.1, but when I log out of the shell, it displays Armbian 24.8.2 (please see the attached screen). Is this normal ?

Hey, guys, I just upgraded my OrangePi Zero. Everything seems to be working, but I'm disturbed by incorrect information on the home page: v25.2.3 for Orange Pi Zero running Armbian Linux 6.12.20-current-sunxi Packages: Debian end of life (buster), possible distro upgrade (bookworm) Support: DIY (community maintained) Please advise me how to make Armbian correctly display the installed version. Thank you.

Hello everyone, I am creating a custom Armbian build for OPI5 && OPI5b. The task is as follows: install several packages in the system and fully configure it. While there are no issues with installing packages and configuring the network, there is a peculiarity with the login and password. Specifically, sometimes after writing the image to the emmc opi5b or SD card, the system allows me to log in with my pre-configured credentials, but other times, when flashing the same image, the system simply rejects my pre-set data and displays the message “Login Incorrect.” How I set the initial settings for the system: In /root there is a file called .not_logged_i…

Flashing odroidc4 images, each installation gets an identical IP address of '00:50:43:84:fb:2f' as specified in https://github.com/armbian/build/blob/7d758026b57380b17b6337e23b053db01c7e0b3d/config/bootenv/meson.txt This gets especially cumbersome with encrypted rootfs. Is there any way to override this without having to rebuild the image? Ideally the hw MAC address would be used, but being able to configure it through a simple change of the boot parameters after flashing would also work.

Hello, I was trying updating/upgrading Armbian on espressobin v.5 Linux kernel 4.19.56-mvebu64 #5.89 SMP PREEMPT Tue Jun 25 22:27:47 CEST 2019 aarch64 GNU/Linux and ran into confusion with initramfs-tools package. updating packages raises an error : Processing triggers for initramfs-tools (0.130) ... update-initramfs: Generating /boot/initrd.img-4.19.56-mvebu64 E: busybox or busybox-static, version 1:1.22.0-17~ or later, is required but not installed update-initramfs: failed for /boot/initrd.img-4.19.56-mvebu64 with 1. dpkg: error processing package initramfs-tools (--configure): subprocess installed post-installation script retu…

Dear all, I love Armbian on my Banana Pro and so I also would like to use this OS on my brand mew Odroic C2. Every installation and configuration works except installing TVHeandend. I tried to compile it because via armbian-config it does not work. But it does not matter which branch I use and which option I try it is not possibe to install on mainline or legacy version. I do not need transcoding - the TVHeadend server just should serve my Kodi with dvbs. Can anybody send me an instruction to compile TVHeadend with Armbian on Odroid C2 sucessuflly? Maybe it is possible to compile completely without ffmpeg? T…

Installing Armbian on Beelink X2 just to play with. Installs but don't know answer to privateuser@beelinkx2:~"$ __________? What's the answer. I had Arm on this a few years ago and removed it. But stuck on install. The line says... The command could not be located because 'usr/sbin' is not included in the PATH environment variable. This is most likely caused by the lack of administrative privileges associated with your user account. ???????

Hello, I'm trying an installation of Mastodon instance on tinkerboard running with Armbian OS. I follow this topic : https://github.com/tootsuite/documentation/blob/master/Running-Mastodon/Production-guide.md the last command i ran was bundle install -j$(getconf _NPROCESSORS_ONLN) --deployment --without development test it returned me : Fetching: hiredis-0.6.1.gem (100%) Building native extensions. This could take a while... ERROR: Error installing hiredis: ERROR: Failed to build gem native extension. current directory: /home/mastodon/.rbenv/versions/2.5.0/lib/ruby/gems/2.5.0/gems/hiredis-0.6.1/ext/hir…

sorry for my question but what os is better for manage web server with ipsconfig mail server and home cloud services, i try dietpi via virtualbox, but armbian good too, what can you advise?

I'm using the Odroid N2/N2+ 23.5 Jammy minimal image. I then updated and upgraded successfully. I then attempted to install MATE via tasksel (which I installed) but that immediate fails with an apt package missing error. SO then I tried to install MATE manually by: $ sudo apt install mate-desktop-environment mate-desktop-environement-extras $ reboot There didn't seem to be any display manger installed so I stalled lighdm $ sudo apt install lightdm lighdm-gtk-greeter $ reboot Then I noticed that Xserver was not installed (really, that's no a MATE dependency!!!) $ sudo aqt install xserver-xorg …

I am running bookworm on my Odroid HC4, upgraded from buster. USB stopped working, which I believe to be U-Boot related. So I am looking for a newer version of the U-Boot package "linux-u-boot-odroidhc4-current", which is at 26.2.1. I tried to change the apt sources to trixie and apt updated, but apt doesn't offer me a newer package. I am not so keen on compiling it myself, so is there a way of finding/downloading/installing a newer package...?

Hey guys, i installed open media vault on my helios4 as described here: https://wiki.kobol.io/omv/ works like charm =) But now i also want to use nextcloud or owncloud and tried to install it ontop of omv, i followed this guide: https://www.technikaffe.de/anleitung-255-installation_und_konfiguration_von_openmediavault_inkl._wake_on_lan The problem is the nginx Server does not work, i can't access the page in my browser. Anyone here had success installing nextcloud or owncloud?

Hello, I am using "Armbian_5.00_Guitar_Debian_wheezy_3.10.55.raw" image on Lemaker Guitar modul. But I need write image into NAND - "There are no targets....." In notice "NAND, SATA and USB install script included (/root)" , but /root is empty. Where I am doing mistake ?