Beginners

Hello everyone, I’m a complete beginner and have very little programming knowledge. However, I decided to build a MagicMirror as a project. For this, I got a BananaPi M2 Berry and installed what I believe is an Armbian operating system on it. Then I downloaded the corresponding packages for the MagicMirror from GitHub. Everything worked so far—though it was quite challenging—and I even managed to personalize each module. But now I have two problems: I want the MagicMirror to stay in portrait mode permanently. However, after a while (about 30 minutes), the screen automatically switches back to landscape mode and opens a new window of the “Display” appli…

Hi, I have a generic brand tvbox (Nilox NXBAP210101) and I would like to compile the Ubuntu xenial version of Armbian. I tried some image of armbian for Olimex from MicroSD and start but I do not have WiFi or LAN and then I did some research on my hardware. This tvbox seems to be an i12-tvbox in fact has the following hardware components: CPU Allwinner A20 1GB Ram DDR3 (512MB x2) N2CB4G16BP-DI 4GB NAND Flash Memory H27UBG8T2BTR 10/100Mbps Ethernet ICplus IP101A 802.11b/g/n WiFi + BT4.0 Ampak AP6210 IR Receiver I would love to use this device fully and then I would like to be able to recompile the distro for my hardware. …

I'm performing Valgrind testing on an ElPotato running Ubuntu Bionic image from Armbian. My program is dying like in https://bugs.kde.org/show_bug.cgi?id=381556 : ``` valgrind --track-origins=yes --suppressions=cryptopp.supp ./cryptest.exe v ==12969== Memcheck, a memory error detector ==12969== Copyright (C) 2002-2017, and GNU GPL'd, by Julian Seward et al. ==12969== Using Valgrind-3.13.0 and LibVEX; rerun with -h for copyright info ==12969== Command: ./cryptest.exe v ==12969== ARM64 front end: branch_etc disInstr(arm64): unhandled instruction 0xD5380000 disInstr(arm64): 1101'0101 0011'1000 0000'0000 0000'0000 ==12969== valgrind: Unrecog…

I have a Nanopi K1 Plus board and I have a 7" LCD screen. Can my motherboard use this controller and can I connect it to my 7" LCD screen? I found a controller on the Internet: This is a contoller.

Hi, I've been trying to compile a c program with GCC and have been unable to move past various errors related to file functions that should be declared in fs.h I have installed (several times!) linux-headers-5.7.15-sunxi, made scripts, pointed the make file to ARCH=arm (not really necessary I know) and KSRC=/usr/src/linux-headers-5.7.15-sunxi/. In the fs header in /usr/src/linux-headers-5.7.15-sunxi/linux/ looks correct and includes references to the functions I require (filp_open(), filp_close(), kernel_write()) but the compiler simply refuses to accept that these functions are declared. It appears to still be using the original headers in /usr/incl…

Hi, I want to use visualino a qt5 programming interface on orange pi with arduino, all my arduino programm works fine on armbian. Is it the same way as debian debbuild ? Or isn't it possible ? Any help welcome

Hi, I have an Orange Pi Zero configured as a Wireless Access Point (via armbian-config) and it works great. However, I want to be able to scan for wireless networks whilst configured as an AP. If I try scan, I get the following error: wlan0 Interface doesn't support scanning : Operation not supported Just wondering if this is a shortcoming of the driver or the XR819?

Hey everybody, unfortunately no one could help me in OMV-forum due to a lack of armbian knowledge. Did all required preparations before running the upgrade script, nevertheless 6 services are broken afterwards, especially ifup/eth0. Apt update, apt upgrade and apt full-upgrade ran without problems before starting upgrade script. My system (set it up years ago with an amrbian-OMV3 image): # cat /etc/armbian-release # PLEASE DO NOT EDIT THIS FILE BOARD=raspberrypi BOARD_NAME="Raspberry Pi" VERSION=5.27 LINUXFAMILY=bcm2837 BRANCH=next ARCH=arm IMAGE_TYPE=experimental # lsb_release -a No LSB modules are av…

I downloaded image from https://www.armbian.com/orange-pi-pc-plus. It marked as STABLE and has kernel 4.14.65. Package linux-image-next-sunxi version 5.59. I'm trying to install kernel headers but in repository no package linux-headers-next-sunxi. And also in repository no package linux-image-next-sunxi (it installed in downloaded image) so it is not possible update other orangepi to latest kernel.

Hello, I'm connecting to my Armbian system from Gentoo boxes but Arbian takes a full controle of remote xterm. Consequently, impossible for me to do some copy/past using my mouse. How to avoid that ? Thanks Laurent

Hello after some search i successfull attack Ibutton on 1 wire, using ibutton probe my problem is that by default kernel scan for slaves every 10 seconds. Want to change it to 1 second or less if possible. Searching a bit, on some linux distributions this solves the problem: modprobe wire timeout=1 slave_ttl=5 modprobe w1-gpio but since in arbian /arbianEnv.txt take care of modules loaded, it do not work, My current file is: verbosity=1 bootlogo=false console=serial disp_mode=1920x10[D80p60 overlay_prefix=sun8i-h3 overlays=i2c0 pps-gpio uart1 uart2 uart3 usbhost1 usbhost2 w1-gpio param_pps_pin=PA6 param_w1_pin=PC3 rootdev=UUID=6de…

Good day. I have a board ODROID N2 +, 2x TBS5520se. OS: Linux odroidn2 5.10.111-meson64 #trunk SMP PREEMPT Wed Apr 20 07:09:24 UTC 2022 aarch64 GNU / Linux After I managed to install the TBS drivers, I found that something was wrong. After running the kodi, the UHD channels hardly work at all. Does anyone have experience in solving this problem?

Hi there, I am using SD Card Copier on Raspbian to copy one Raspberry microsd card to another (can be smaller than original card) and it works great. But when I used it to copy armbian microsd card to another microsd card, another microsd card is unable to boot. Any idea what can be wrong? I love this approach because I am able to copy original card to smaller card but unfortunatelly Armbian OS is not able to boot (on the other hand Raspbian boots ok). When I use Win32DiskImager to copy Rasbian and Armbian, both new cards boot up successfully. Any idea please how can I use SD Card Copier installed on Raspbian to copy microsd card with…

About 6 months ago I started a music project with the Raspberry PI Zero 2W. The project is a module to generate weird and wonderful drone music/sounds (example here) Because of the fact that it's nearly impossible to got hold of the Raspberry PI Zero 2W, I want to "port" the project to an alternative and available board with the same footprint and pinout; the BPI M2 Zero would be perfect. I have quite a challenge though; See image: The exact setup below with an Raspberry PI Zero 2W (O/S: Bullseye 11) and the install procedure described here, runs absolutely fine --- but now I want this setup to run on the BPI M2 Zero (O/S: "Armbian_20.05.1_Ba…

**Environment:** You can get some of this info from the text that pops up in the console when you run a pygame program. - **Operating system** (e.g. Windows, Linux(Debian), Linux(Ubuntu), Mac): Focal 20.04.4 LTS, Kernel 5.15.25-rockchip - **Python version** (e.g. 3.7.9, 3.8.5) : Python 2.7.18 & Python 3.8.10 - **SDL version** (e.g. SDL 2.0.12): Tested both 2.0.10 & 2.0.20 - **PyGame version** (e.g. 2.0.0.dev10, 1.9.6): 1.9.6 (1.9.6+dfsg-2build1) - Asus TinkerBoard RK3288 **Current behavior:** Once python-pygame installs (sudo apt install python-pygame) after reboot the python script that uses the mixer and plays the music (livewire.py…

$ ip link 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP mode DEFAULT group default qlen 1000 link/ether 68:27:19:ad:02:09 brd ff:ff:ff:ff:ff:ff $ sudo lshw -C network *-network description: Ethernet interface physical id: 7 logical name: eth0 serial: 68:27:19:ad:02:09 size: 100Mbit/s capacity: 1Gbit/s capabilities: ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation …

Apologies for this noob question but I am still new to Ubunto. If a piece of software is currently available as a binary archive only and the accompanying installation advises unzipping it to "a folder" and running the software from this place I presume this is not really advisable, as would be the same in the Windows world. In which case, should I install the software in, say, /usr/share and run it from there or is it okay to just unzip it and run it out of the /home/[username]/ directory? Thanks!

I bought that DAC to my OPi - I tought it will be easier. I've configure PCM and TWI in FEX file (IIS works perfect on oscilloscope). Also I've made mods on DAC's board - Raspberry has PCM at other pins. But SPDIF still not working. I suppose, that WM8804 is in software mode, so I have to config it via IIC. My 3.4.113 Armbian doesn't have driver for that DAC. What can I do?

Hi, I have a really strange situation, which I don't understand and for so - I need help to solve it. I had 2 rockpi, one with sata hat which plays the nas role and one without sata drives, which is my frontend for home cinema (connected to AVR and beamer). Last few days I had the effect that the frontend froze and after close examination it turned out that all memory was used up. Fortunately, I already had a new rockpi with 1,4Gb memory. I thought I'd just change the eMMC and go on as before. But that was probably a big mistake. The new one did not start at all with the eMMC from the 1.2Gb rockpi. That's why I thought I had to compl…

Octave plotting fails (fltk or gnuplot or qt) unless the additional package fonts-freefont-otf is also installed. This may be a general debian problem as my anitX-19.2-x386 computer also had this problem. Thanks

Mỗi Dự án của tập đoàn Vingroup luôn tạo sự khác biệt, độc đáo, mới lạ, để lại dấu ấn riêng cho người dùng. Là tập đoàn đi đầu trong việc vun đắp các tỉnh thành kiểu mới, bắt kịp xu thế thời đại, kết hợp nét đẹp đương đại và truyền thống, mỗi thành tựu mà Vingroup với về là niềm tự hào của người Việt. Vinhomes Smart City là khu đô thị sinh thái khép tín tiếp theo được Vingroup giới thiệu tới thị phần trong năm 2020 sẽ quy tụ đa số những nhân thể ích đẳng cấp nổi trội chuyên dụng cho phần lớn các nhu cầu của mọi thành viên trong gia đình như trông nom và rèn luyện sức khỏe, vui chơi, tìm tậu, tiêu khiển và hệ thống giáo dục đương đại. 1 số tiện ích dự kiến của …

it does not exit the location screen. it doesn't go into anything. can anybody help me.

Hi Armbian Folk, I'm having trouble formatting a 120GB HDD as LUKS encrypted using 'Disks'. Successfully managed to do this with a 120GB SSD already so not sure what the issue is. Screenshot of error message here: https://imgur.com/a/X5FSuuK Any advice great-fully received. Thanks

I don't use any uart port ttyS1, ttyS2, ttyS3 on ubuntu_lxde_desktop_OrangePipcplus_v0_9_1.img os on OrangePiPcPlus board. I Used some software as minicom, gtkterm .. but don't anything happen on TDX, RTX pin. when run command line folow $ gpio readall Help me please.

Hello, I would like to know how they reduce the size of the images and then, when the microSD cards are inserted into a card, they expand to fill the entire space. In other words, the same thing that Armbian images do when we use them for the first time: they are small, and then they occupy all the storage space.

Hi, It is very hard to start OS (community version, downloaded from here). The system doesn't start at all, if the keyboard is already attached. I've discovered some magic moment during the startup process, when I can attach keyboard and system goes further. In most of moments the boot process stops, as soon as I'm attaching the keyboard. Lines are scrolled too fast to let me note what moment is "successful". Also I've noticed that the chip is very hot, when the keyboard is attached. It's much colder when keyboard is detached. Another small issue is that functional keys don't work. Though Ctrl/Alt and other similar keys do. …

Is there any support for Rock 3 C (RK3566)? I've tried booting from the Rock 3 A image, but no joy. It looks like the Rock 3A was RK3568 so I wonder if using another device tree overlay for RK3566 might otherwise work?

I have a few STBs that I would like to install linux just for fun. 1. Amino A540 2. Arris VIP6102W 3. Kaon KSTB2020 Which STB would be easy to start with?

I have the 'Full Featured Version' of these boards: https://www.phytec.de/produkt/single-board-computer/phyboard-segin/ Featuring an i.MX 6UL-G2 CPU, Arm Cortex-A7 with 512MB Ram. Has anybody here tried running armbian on these?

Hi there, I have searched a bit, but didn't found HOW (step by step) make my OPi4 (with Armbian installed) an BitCoin factory. Looks it is a quite good candidate, 6 cores (2 BIG), GPU (I know, this is not Nvidia ;p). For the moment not busy doing anything. Could someone provide some kind of HOWTO on topic? (google reports small number of BC diggers for Linux). I have found some howto and (for ARMHF, not 64) binaries to make Linux machine "full" node of BC network, but not on digging BC.

Hello I use a odroid c2 und create a full img backup. Can i use this in a newer odroid like too? I have some programms etc on it and don't want to reinstall it.

hy, i know it's off topic but i don't know where i can put my quesiton. so i have a Bananapi m2 with bananian =>> there are two partition : boot ( mmcblk0p1) and root(mmcblk1) Can i add another root's parition(mmcblk2) and switch between the two root's partition? 'V£ ^‰UÐ?, L _E#Ö D #-------------------------------------------------------------------------------------------------------------------------------- # Boot loader script to boot with different boot methods for old and new kernel # Credits: https://github.com/igorpecovnik - Thank you for this great script! #----------------…

Hi guys, the history before: I ordered 2x OrangePi3 and got them at 29/07/2019. The 1st one I've unpacked could not be flashed to another Operating System. Neither the images of the developer worked nor the armbian. I figured out, that the HDMI port and the SD card reader is buggy at that 1st device. Today I unpacked the 2nd OrangePI3 and armbian booted easily and rapidly into the SD card OS. I was able to flash the eMMC with armbian and I am happy, but not with the 1st one of OPI3. I hope that the manufacturer in china will exchange the buggy OPI3 for a working other one. To cut a long story short, the a…

Hi, On my orangepi zero (256MB) running armbian image, I am observing some odd behavior that I do not fully understand. Spoiler Linux sinaspi 5.10.16-sunxi #21.02.2 SMP Sun Feb 14 21:12:17 CET 2021 armv7l GNU/Linux Distributor ID: Debian Description: Debian GNU/Linux 10 (buster) Release: 10 Codename: buster http://ix.io/3mQX In an effort to 'harden' the orangepi zero configuration (by making the user experience annoying), I have shortened the sudo password prompt timeout. On the orangepi zero board, the following setting results in a timeout of only 2 seconds, instead of 15 seconds: #[B…

I'm trying to setup serial GSM module, but wvdial/wvdialconf can't connect to modem: WvModem<*1>: Cannot set information for serial port Manual communication (from screen, minicom) is ok, modem responds to all AT comands. Seems like wvdial can't set right baud rate or other parameters

Hey there fellow Pi enthusiasts! I am absolutely thrilled to have just gotten my hands on the Orange Pi 5, but being new to the world of Pi's and small chips, I was a bit intimidated. However, after exploring this forum, I must say that I am impressed with the amazing work you all have done with the software! I recently stumbled upon the Armbian 23.02 Jammy Gnome and decided to give it a shot. After successfully installing it to my SSD, updating and upgrading it, and enabling 3D acceleration with the commands provided, I thought I was good to go. But something still seems off to me - the graphics just don't seem to be as fast as I thought they woul…

Hey Igor, I noticed on another thread that you're running the ClearFog Pro on a 4.12 kernel; What did you do to get the mv88e6xxx working? Every build against mainline I do for either 4.4.96 or 4.13.11 ends up with a port that doesn't properly detect link status (up or down) and doesn't receive any traffic.

Here it is specified as required but is not made clear how to obtain or set it. Specifically, how is it different from 'address' line? Thanks so much Joe

ALL is working, net via RJ45, WiFi on 5Ghz, Audio...(Yeeeees ! ) headphones and audio on HDMI, audio capture on Audacity, Teamviewer (I'm writing this on my PC via Teamviewer) Kudos for all people working on this project !

g_ethernet worked great for a long time, then i updated the software on my destop and it is broken. it almost works but the host drops all the packets for some reason. am i the only one that is having this problem?

Please forgive if this been posted before, I've done a search and found nothing. I'm running xfce desktop and as stated, window control buttons are missing from top right of windows.. I set up a temporary additional user, same on that one. Window configuration is correct.

Just wondering if anyone has Webmin running on their Arm system. I have encountered problems installing and using a dependency "apt-show-versions" I have studied and attempted to resolve the issue using information on this page https://serverfault.com/questions/845192/dependency-problems-while-installing-webmin It goes into a fair bit of detail, but unfortunately nothing is working. Can anyone put me on the right track?

I'm trying to get the orange pi lite 2 to work with a desktop image, but the images i find on the armbian site are server only (no interface). If possible, i'd like some help with choosing an actual desktop image that has a compatible working kernel for this board. Can anyone point out a specific version or provide a download link? if so, thanks.

Hello, could be possible to introduce the package with newest available GDB 13.2? The version 13.1 is rather unusable — it segfaults on regular basis.

Armbianmonitor-U http://ix.io/450c MPV broken (does not play video anymore)...might or might not be related to the last apt update/upgrade I did ? Any hints would be much appreciated...thanks MPV output: $ mpv [osc] Lua error: bad light userdata pointer [ytdl_hook] Lua error: bad light userdata pointer [ytdl_hook] Could not load lua script @ytdl_hook.lua [osc] Could not load lua script @osc.lua [stats] Lua error: bad light userdata pointer [stats] Could not load lua script @stats.lua [console] Lua error: bad light userdata pointer [console] Could not load lua script @console.lua [auto_profiles] Lua error: bad li…

Hi - I have a ZeroPi board running 'bookworm' as supplied by the vendor. I woudl like to run 'trixie' and downloaded it from this page https://www.armbian.com/zero-pi/ but had no luck getting it booted. Would anyone have an idea how to get this to work or what the status is of 'trixie' for the ZeroPi boad. Thanks

Hello every body... I use MarsBoard A20 with HY070CTP-HD LCD touch screen. after connect lcd to my board every thing is ok. I want to use HDMI of this board In addition to the LCD touch screen. in other words, I want to use both of device in Board. The linux version that the MarsBoard company has been released and I am using is specially for the HY070CTP-HD LCD and does not working with HDMI. Is there any way to enable HDMI on this board? I want to show some things in HDMI port that not displayed on the LCD.... please help me...

Please forgive me if I posted this in the wrong category. My immediate task isn't related to P2P, but my end goal of setting up a personal server is. I am attempting to compile a custom image with https://github.com/botter-nidnul/userpatches. You can read more about the project here https://urbit.org/grants/urbian-a-customized-linux-distribution-for-urbit-appliances. I can compile a focal image without customization, but when I attempt to customize the image, I get `umount: /home/nebulay/repo/project/armbian/build/.tmp/rootfs-d412f0e4-e33c-4c0c-909b-9042f7924589: target is busy` This repeats until I hit ctrl+c. I get an image, but it fails to boot. I have googled it, and…

Hi, Just something I have found, not sure if this is an 'issue' but it definitely caught me out and took a while to figure out and fix. I have several armbian machines (Odroid C2, BananaPi Pro) all running Jessie or Stretch and all working fine. A recent project of mine (using Armbian on a BPi Pro) was to build a Pi-Hole DNS. Some time after doing that I noticed that none of the Armbian machines would successfully run 'apt update' whilst other unix machines including a RPi running raspbian were all fine. DNS config was fine, I could see requests hit the Pi-Hole and be answered. nslookup / dig on the armbian machines all worked fine b…

Good morning, Since last week I do not manage to compile armbian anymore. I checked out commit c1cfd6059bac4ced7f4901e19acc017d1e92d8ba on repo https://github.com/armbian/build.git and launched the following command : compile.sh docker USE_MAINLINE_GOOGLE_MIRROR=yes BOARD=orangepizero BRANCH=current BUILD_KSRC=no RELEASE=bullseye BUILD_DESKTO P=no BUILD_MINIMAL=yes KERNEL_ONLY=no KERNEL_CONFIGURE=no ROOTFS_TYPE=ext4 BOOTFS_TYPE=fat COMPRESS_OUTPUTIMAGE=sha,img I always get the 'htop' error: E: Failed to fetch http://armbian.systemonachip.net/apt/pool/bullseye-utils/h/htop/htop_3.1.0-0~armbian20.08.2+1_armhf.deb 404 Not Found [IP: …

I need gc2035+vfe_v4l2 module, but the mainline kernel does not support it. So, how to build armbian with legacy kernel?

Hallo my odroid C2 shutdown during the night. i can see it always on the next day, when the ssl connection is disconnected. Is there any log file, where i can see, if there was any problem? thank you

I was search dhcp packet. using the wireshark program. but i was find that dhcp packet send to the random cycle(discover,renewal). I want to know the random time of dhcp packet. it's random time that random function in the source code.

...

Hi, I booted today latest Buster on NanoPi Neo2 plus and I cannot see bluetooth interface working. There is no mention of bluetooth in dmesg. Is this feature even available? Thanks. BR, marek

Hi Sorry for my poor english... My board is a Rpi+ 2E connected to a Xoro 2442 TV by HDMI. I have installed RetrOrangePi. My problem is : - If I do h3disp -m 1080p60 my image is cropped, I think there are no overscan and I can't configure overscan on my TV ... - If i do : h3disp -m 1080p60 -d I know this is where we have a DVI adapter, but... that's strange : sometimes ... my tv displays (on bottom) : "HDMI 1080p@60", sound is ok, but my image is green. sometimes, my TV displays (on bottom) "HDMI 1920x1080@60" my image is ok (not cropped) but I have no sound ... It's random at …

Armbian makes setting up an AP incredibly easy- I'm also enjoying NetworkManager, which I've stayed away from on my desktops until I started development with OPi Zero/Armbian Buster. I'm looking for an automatic, effective way to switch between my AP and a configured wireless network. If the wireless network is not available, I'd like the AP hot spot to run- if the wireless network is available, I'd like to automatically connect and not use the AP. Is anyone aware of a way, possibly even a simple script available that will run @ startup? Thanks- ACR

Hello, I have an Odroid C2 with Armbian 21.02.2 Buster with Linux 5.10.16-meson64 I use a bluetooth usb key (CSR 4.0) but hci0 is down and I can't get it up. root@jeedom:~# lsusb Bus 001 Device 004: ID 067b:2303 Prolific Technology, Inc. PL2303 Serial Port Bus 001 Device 003: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode) Bus 001 Device 002: ID 05e3:0610 Genesys Logic, Inc. 4-port hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub root@jeedom:~# hciconfig hci0: Type: Primary Bus: USB BD Address: 00:1A:7D:DA:XX:XX ACL MTU: 679:8 SCO MTU: 48:16 DOWN RX bytes:1468 acl:0 sco:0 events:48 errors:0 TX by…

Current Hardware Setup: Rockpi 4C,eMMC module,eMMC to SD Card Adapter, M.2 Extension Board, NVME Drive, USB To Serial Debug Cable. OS: Armbian_20.08.1_Rockpi-4b_focal_current_5.8.6.img.xz (Right now, I'm using the above mentioned os from sdcard and the os can detect nvme disk using 'lsblk' command) Query: How one can install '/boot' partition on eMMC (or sdcard) and '/' (root-partition) on NVME disk (attached to rockpi 4c through M.2 Extension Board) ? (aim is to boot from either eMMC or ssd and use nvme disk as / partition) Waiting for your valuable suggestions. Thanks in advance from, Spherulite.

I am resurrecting a Banana Pi M1 that i've had in the cupboard since new. I've downloaded and installed Armbian 26.2.1 build date 03.02.26 rev 5abb97453. I want to use the SOC as a photo repository for a family member so they can use PhotoSync app to transfer their photos as a home NAS. I have attached a 1Tb 2.5" hard drive and was goin to set up and SMB share but notice in Armbian Config a software package for OwnCloud which looks perfect as it can be accessed via a web browser. I have tried installing OwnCloud from Armbian Config and it installs docker but then fails downloading the Owncloud package. The error is: Unable to find image 'owncloud/server:lat…

i want to build custom armbian image from git clone https://github.com/armbian/build ./compile.sh \ BOARD=orangepipcplus \ BRANCH=current \ BUILD_MINIMAL=yes \ BUILD_DESKTOP=no \ KERNEL_ONLY=no \ KERNEL_CONFIGURE=no \ EXTRAWIFI =yes \ BOOT_LOGO=yes \ COMPRESS_OUTPUTIMAGE=xz how can i disable u-boot message log and kernal log so no log or text will be displayed in hdmi screen i read somewhere that i need to add linux_silent or something like this

I found the CAN device driver sources in sun7i_can.c - CAN bus controller driver for sun7i to configure the gpio pins for the special case of acting as TX and RX for CAN, the following function calls are used: sw_gpio_setcfg(GPIOA(16), 3); I try to use this code to implement the can4linux module an a BananaPi M2-Berry using Armbian stretch but are not able to find any prototype of such a function sw_gpio_setcfg(); nor the definitions of the gpio ports like GPIOA. What ist the correct way of accessing the gpio ports from within the kernel? Thanks for helping.

For some weird reasons, my Orange PI zero +2 H3 kept overheating and rebooting. All I did was just SSH it. http://ix.io/3qB5

Oi, eu sou muito novo para o assunto, mas eu tenho um problema com um pi laranja e eu instalei vários (IMG) e comecei, mas ele caiu e lá no final era como "iniciar o kernel" e ficou congelado então eu instalei outras versões a mesma coisa aconteceu tipo uma interferência de tv e desligada alguém pode me ajudar a instalar o armbian corretamente?

Как установить почтовый сервер (postfix + dovecot + postfixadmin + roundcube) без настроек конфигурации ISP

Hello, please how can I detect if OS runs from microSD or from on board emmc? Anything like python, sh or command line command would be helpful. Many thanks.

I've installed the latest available version for my board (Armbian_21.05.4_Odroidxu4_buster_legacy_4.14.222) and upgrade the Kernel to 5.4.125 Now, I'm wondering If the watchdog was supposed to work (I do have /dev/watchdog and installed the watchdog package with apt). But it seems there is a problem, here is what I tried: odroidxu4:~:# service watchdog status ● watchdog.service - watchdog daemon Loaded: loaded (/lib/systemd/system/watchdog.service; enabled; vendor preset: enabled) Active: active (running) since Mon 2021-08-23 17:07:20 CEST; 1h 5min ago Process: 2295 ExecStartPre=/bin/sh -c [ -z "${watchdog_module}" ] || [ "${wat…

On H3, this can be done by editing script.bin That file has been replaced by Device Tree on H5 board, /boot/orangepi/OrangePiH5orangepi.dtb However, many have reported that editing that file can not enable RCA, see https://github.com/OrangePiLibra/OrangePi_H5SDK/issues/7 So what should I do to enable it? Is there an easy way to do it without compiling the kernel?

latest version build orange-pi-pc-plus with some ld error: ./compile.sh docker /root/armbian/cache/toolchain/gcc-arm-8.3-2019.03-x86_64-arm-linux-gnueabihf/bin/arm-linux-gnueabihf-ld: fs/sync.o:(___ksymtab_gpl+__sync_filesystem+0x0): undefined reference to `__sync_filesystem' make: *** [Makefile:1185: vmlinux] Error 1 Displaying message: Compiling current kernel 5.15.37 info Displaying message: Compiler version arm-linux-gnueabihf-gcc 8.3.0 info Displaying message: Using kernel config provided by user userpatches/linux-sunxi-current.config info Displaying message: Compressing sources for the linux-source package Displayi…

I'm working on a project that utilises AI, GPS, Bluetooth... and i can't decide whether i should choose OPi or RPi. I've been researching for the past couple of days and I'm amazed at what the OPi can do, it's crazy for it's price. But my concern is how little support and community there is out there, idk if it's worth the risk. So if any one worked with it can you please tell me what kind of difficulties have you faced and how similar is it to working with the raspberry?

I would like to run Armbian on my multi boot PC. i came across a video on how to install Armbian on an X86 PC. How you have to use Gnome Disk to Restore Image to your drive. Does anybody know if it would work correctly doing that on a multi boot PC? I know I would need to update Grub afterwards for it to show in the list.

armbian-config has significantly changed in Bookworm/Kernel 6.6. It looks to me that its not reflecting the actual device settings. Please refer to the attached screenshot from /boot/armbianEnv.txt. Compared to Bullseye/Kernel 6.1.92 I see an additional line "fdt_overlays, where all the dtb settings from the new armbian-config appear, fdt_overlays=sun50i-h5-analog-codec sun50i-h5-i2c1 sun50i-h5-tve sun50i-h5-uart2 sun50i-h5-usbhost0 sun50i-h5-usbhost1 sun50i-h5-usbhost2 sun50i-h5-usbhost3 but they seem to not having any effect. In 6.1.92 this line does not exist. The real dtb settings are still in the line above overlay_prefix=sun50i-h5 overlays=i2c1 uart1 usbho…

I am trying to update a Lamobo R1 with armbian 5.31 it's kernel from source. I have compiled and installed it (v5.9)I have also updated the initramfs, but still when I boot I see on screen with uname-r the older kernel 4.9.7. Is there any other thing I'm missing so the bootloader boots with the newest installed kernel?

Hi! I've been reading a lot about iptables in last few days but I can't get my head around the configuration that I need. I'm still learning and this is beyond my scope. I've set the Rock64 as an access point connected to a vpn server. I need to access any devices that are connected to my main router in 192.168.10.1. My wlan access point is in 172.24.1.1. eth0 and wlan0 are always tunnelled through tun0 and it must stay that way. Connected from wlan0 I can ping 192.168.10.176 (eth0) but not 192.168.10.1 (Internet router) or anything else outside wlan0 subnet. My aim is to access smb servers, nfs servers and ssh to any ip in this subnet 192.16…

I have a similar question as asked here... https://forum.armbian.com/topic/2914-how-to-display-foreign-fonts/ I live in India and visit Hindi / Marathi websites. There are just boxes in the web browser. The script is called "devnagari". Is there a similar command as mentioned in that post?

i have a orange pi pc and i was trying to update kernel and i made a huge mistake, i installed linux-image-next-sunxi instead of linux-image-next-sun8i !!!! now my orange pi pc dont boot, can i reverse my error, how can i change boot in SD card to boot with sun8i ??? please help

Orange Pi Zero H2+ Armbian 21.08.1 Orangepizero Bullseye current 5.10.60 from armbian.com/downloads. I have attached external RTC module with DS3231 on TWI0 (/dev/i2c-0) and activated it with command echo ds3231 0x68 > /sys/bus/i2c/devices/i2c-0/new_device After that /sys/class/hwmon/hwmon0 links to temperature sensor on DS3231 instead of SOCTEMP. So armbianmonitor -m shows temperature from DS3231 now. syslog shows error: thermal thermal_zone0: binding zone cpu_thermal with cdev thermal-cpufreq-0 failed:-22 Solution #1: use command "echo ds1307 0x68 > /sys/bus/i2c/devices/i2c-0/new_device" …

Hi,o My old laptop doesn't have wifi lan card. So, i wont setup Orange Pi Zero as extend wifi lan card, or wifi bridge? wirlesss to wired ethernet How to ????????????????

hello I have installed rock64 armbian debian bullseye, on the emmc card and I have an ssd disk by usb3, the disk is mounted in /etc/fstab, but every day approx it gives me an error blk_update_request: critical target error, dev sda, sector 250069504 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [18241.624593] Buffer I/O error on dev sda, logical block 31258688, async page read I have tried several discs and it happens to all of them Is there something to be able to install so that I don't get that error

Dear All, today my Opi PC stoppped responding. But I think it is not totally "dead". From other machine I did: root@PKSERVER:~# ssh -vvv pkbackup OpenSSH_6.7p1 Debian-5+deb8u4, OpenSSL 1.0.1t 3 May 2016 debug1: Reading configuration data /etc/ssh/ssh_config debug3: checking match for 'exec "/etc/ssh/pkdata.sh %n"' host pkbackup debug1: Executing command: '/etc/ssh/pkdata.sh pkbackup' debug1: permanently_drop_suid: 0 debug3: command returned status 1 debug1: /etc/ssh/ssh_config line 18: no match 'exec "/etc/ssh/pkdata.sh pkbackup"' debug3: match not found debug1: /etc/ssh/ssh_config line 21: Applying options for * debug2: ssh_co…

Hello, I have an XU4 with an emmc. Now I have tried nextcloudpi image from https://ownyourbits.com/downloads/ here. I use dd. With a SD card, I have two partitions and can boot. With the emmc, I have only one partition and can't boot. I don't now why :-( can someone help me? greetings

Hello, I am trying to get i2c-0 working on my Armbian 20.11.3 Focal with Linux 5.9.14-sunxi64 After I run: i2cdetect -y 0 i see a plenty of dmesg errors: i2c i2c-0: mv64xxx_i2c_fsm: Ctlr Error -- state: 0x4, status: 0x0, addr: 0x77, flags: 0x0 I have enabled i2c-0 in armbian-config, tried what I could but no luck. Can anybody told me what mv64xxx_i2c_fsm: Ctlr Error means please? ls -l /sys/bus/i2c/devices -> lrwxrwxrwx 1 root root 0 Dec 22 13:05 i2c-0 -> ../../../devices/platform/soc/1c2ac00.i2c/i2c-0 The same wiring and installation (with i2c_bcm2708 and i2c_dev) works on Raspberry p…

I have git cloned source code from https://github.com/armbian/build and compiled image Armbian_5.71_Pcduino2_Debian_jessie_next_4.19.13.img for pcduino2 according to document. I have wroten the image to sd card through etcher, but the pcduino2 board cannot boot from this sd card. But I can boot pcduino2 with image downloaded from https://www.armbian.com/pcduino2/ What problem with me ? Please help me.

In the latest image for NanoPi M1 Plus, I enable the analog audio I/O on the card by adding overlays=analog-codec in /boot/armbianEnv.txt But the microphone on the card is disabled by default, because the ALSA control "Mic1 Playback Switch" is set to false by default on the card. Worse still, this mixer control does not appear in the alsamixer GUI, and the only way to set to true is to use the amixer command line utility, for example with: amixer cset name="Mixer Capture Switch" on on I can do this inside a first boot script, and then ALSA will persist the state between reboots. But does not seem ideal, and took me a very long time to …

I have one problem a bit hard to explain. I had a monitor with VGA, and that was working with my Orange Pi Plus 2e, but I had to change the monitor to DVI and the screen doesn't work anymore. I can't see anything. even if I try to run with my television (32'') i can see the screen when it's loading the armbian (the commands), but when it tries to open the GUI I cannot see anymore. I want to cancel the autologin to GUI to change the size to use the command line to change the screen size, but I have no idea how to do it, I didn't find anyway to do that. Anyone has any idea?

On Armbian Orange Pi 5b webpage, one can download the latest image with kernel 6.7 Rrc1, not stable. Once the kernel (6.7) is stable, will there be a way to upgrade without reinstalling? Thanks.

by asking sudo iptable -l i get this

Hello everyone, I have a question. It is about SSD memory, which can be connected to the usb3 interface via a converterbox SATA 1,2,3 to the OrangePi3 device. I did not find any helpful information in the hardware recommendations inside the Arbian Forum for OrangePi3 H6 all winner (looser). Before I jump into the cold water like with my RPI 4b+, I am interested in which SATA 1,2,3 adapter to SSD to USB3 works with the OrangePi3 devices. I already know that the NVME slot and memory is not supported. And a usb3 converter with SSD additionally absorbs power. Thanks for Help

Hello! Is there some Allwinner's based board that can work as usb-client under mainline kernel? Looks like other people want only host-mode from OTG-port with mainline kernel =( Thanks

I came across "Peer-to-peer technical support", today and noticed there were "101 topics".

Hello, I want to transfer .img files to bananapi. These weight gigabytes. I notice the eth0 interface was wrongly set up to 100Mbp/s I used ethtool to set it up correctly pi@Liberty:~$ sudo ethtool eth0 | grep -i speed Speed: 100Mb/s sudo ethtool -s eth0 autoneg on speed 1000 duplex full pi@Liberty:~$ sudo ethtool eth0 | grep -i speed Speed: 1000Mb/s Now I thought the sftp limitation of 1Mb/s was over, it is not. Are there ucap / bandwith limitation settings in Armbian? if so how to remove it? Thanks, SoSie

I try to make a NAS with rock64pro. (rockpro64 4.4.167-1163-rockchip-ayufan-g3d2c5b33817a) with openmediavault. If i use the latest version(stretch-openmediavault-rockpro64-0.8.0rc8-1116-arm64.img.xz) i can't see the hard drivers even i put the option below. I have a Marvell Pci-e card( PCIe SATA Marvell 88SE9230) . https://www.amazon.de/gp/product/B01ENKQLOQ/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&amp;psc=1 I can't see any of the drivers if i dont do this trick : put pci=nomsi into the kernel boot parameters in /boot/extlinux/extlinux.conf The nas is properly cooled using fan and head sink . I get this errors and system restart.....Plea…

Hello I tried to shrink my sdcard (64gb, 17gb in use) and copy it to a 32gb card. I found a tutorial, but it don't work I fownloaded gparted and create a bootable device. The instruction 1.resize2fs /dev/sda1 [new size of the partition] in my case the original card is sdc1 2. Copy the shrinked device to the new device dd if=/dev/sda of=/dev/sdb In my case dd if=/dev/sdc of=/dev/mmcblk0 Is it really correct to use it without the "1" ? Sda, not sda1? However It didn't work.... Gparted gui shows me, that the original sd card has the original size 58.24gb. But I shrinked it to 27gb..... wi…

Hello, has anyone found a way to get a relatively new nodejs running on Armbian Bionic? I can not find one. I always end up with a not supported plattform. I am using a banana Pi M2 plus. I currently have a very old one running, (8.x) and I can not remember how I did that. Thank you for your support!

Hi guys, I have orange pi plus and am going to adopt camera on this board. I got GC2155 camera module from another project and it's pin compatible with Opi's Con1. Therefore I would like to use this camera module on the PIO plus. I tried to search about GC2155 from this site, but I couldn't get any information. Any guy can help about this topic?

## Description After a fresh installation of Armbian for Rockchip64 (Rock 3A), the system ships with `linux-image-current-rockchip64` version **26.2.1** (kernel 6.18.8), but the corresponding `linux-headers-current-rockchip64` package for version 26.2.1 is **not available** in the public APT repositories. This prevents installation of kernel headers required for DKMS modules, out-of-tree drivers, or any kernel module compilation. ## Steps to Reproduce 1. Flash the latest Armbian image for `rock-3a` (branch: `current`) from the official download page. 2. Boot the device and connect to the network. 3. Run `apt update` with any standard mirror (e.g., `mirro…

Hi, I recently bought a 7'' 800x480 HDMI TFT LCD display. Im trying to make it work with my OrangePi Plus 2e where I have armbian xenial desktop distro. I have tried several settings on the scrip.bin file, but the screen is always white. ... screen0_output_mode = 2 screen0_output_type = 3 fb0_width = 800 fb0_height = 480 ... Its intresting that the same settings works perfectly on a Cubieboard2 A20 board. I also tried the Armbian bionic server and installed a light desktop from armbian-config and the display works! but the screen has a greenish tint. (and there is no script.bin file on a server version, so I cant compare to the xenial like…

Hi! There are Images for an old/original Lemaker "Banana Pi" up to 03/2021 in the archive, but from that time onward it seems like only "Banana Pi Pro" is supported with new images. Is it possible and save to use such "Banana Pi Pro"-image for the old Banana Pi too or should I stick to the last archived version of the "Banana Pi"-image? Datasheet looks almost identically, both with same SOC Allwinner20 and CPU CortexA7 and only the SD-slot and GPIO-pins are different, so I thought I'd try the Pro-Image, which also does install and run ok. But I have strange issues running some software (iobroker) afterwards, so I'm not sure if this migh…

Hi, not sure if this is the right place to ask, but I just dug up an old banana pi m2plus (with on board wifi) and flashed the latest Armbian_21.08.1_Bananapim2plus_bullseye_current_5.10.60 on a class 10 samsung evo micro sd. When booting for the first time I had a monitor, keyboard and LAN attached and successfully set up users with the wizard and apt upgrade the system. Now I tried to set up wifi with "nmtui-connect SSID " after this guide: https://docs.armbian.com/User-Guide_Getting-Started/ where SSID is the SSID of my network, but I get "No such connection 'SSID' " and I can only confirm. If I open the networkmanager with it looks like …