Beginners

Hello fellow Armbian folk, I've been a happy armbian user for many years. Recently, I've been trying to upgrade to bookworm from bullseye on my cubietruck, however have been hampered by Hash Sum mismatch errors from multiple armbian mirrors. I have followed all instructions on clearing the /var/lib/apt/files, apt clean, but nothing seems to help. I've tried multiple armbian mirrors with no luck. So now I'm seeking some community support.

I've been getting these errors when I run apt update / apt upgrade on an OrangePi One Plus: Err:13 https://apt.armbian.com/apt bullseye Release Redirection from https to 'http://imola.armbian.com/apt/apt/dists/bullseye/Release' is forbidden [IP: 173.45.128.12 443] if I edit /etc/apt/sources.list.d/armbian.list to be https://imola... it works fine. EDIT: armbian.list originally looked like this: deb https://apt.armbian.com/ bullseye main bullseye-utils bullseye-desktop and I changed it to look like this: deb https://imola.armbian.com/apt bullseye main bull…

I'm new to Debian. I've been using Arch for a while. This error occurs on my new RockPro64 when I try to run "apt update": Hit:1 http://ports.ubuntu.com focal InRelease Hit:2 http://ports.ubuntu.com focal-security InRelease Hit:3 http://ports.ubuntu.com focal-updates InRelease Hit:4 http://ports.ubuntu.com focal-backports InRelease Hit:5 https://us.mirrors.fossho.st/armbian/apt focal InRelease Reading package lists... Error! E: Problem parsing dependency 21 of gdc-9-x86-64-linux-gnux32:arm64=9.3.0-17ubuntu1~20.04cross1 E: Error occurred while processing gdc-9-x86-64-linux-gnux32 (NewVersion2) E: Problem with MergeList /var/lib/apt/lists/ports.ubuntu.com_dists_focal-up…

After upgrade two of my boards to mainline (4.14.51-sunxi) I have noticed that simple command apt list basically stopped working. It stuck at "Listing ..." (at this moment 1 core of CPU is utilized in 100%). Now I run it in background to see if eventually it will be completed... So far (15 minutes)... nothing. apt list --installed is also very slow, but after some time it gives results. However, it is much slower than on "default" (3.4.113-sun8i) Can anybody check it and reconfirm?

Hi everyone! I'm new to the armbian world (but not to linux in general). I have two Orange PI R1+ LTS. After the last update, if I try to execute another update, using apt update && apt upgrade I have the following result: The following packages have been kept back: linux-dtb-current-rockchip64 linux-image-current-rockchip64 linux-u-boot-orangepi-r1plus-lts-current The systems are: Armbian 23.8.1 Bullseye with Linux 5.15.93-rockchip64 This happens after the last update, I've never had this issue before Thanks

Err:14 https://uk.mirrors.fossho.st/armbian/apt focal/main armhf Packages File has unexpected size (516030 != 453208). Mirror sync in progress? [IP: 82.145.63.161 443] Hashes of expected file: - Filesize:453208 [weak] - SHA512:2106846c18399ffc28b2da849488e65c512fdc5024e395233874da288a0f8bcd380c31e0a6d8b86689adcb695b8d1ddf53714310976c520a51433887c8596c64 - SHA256:f98960dc39dcf26f9825ea957244139e72bc71bf64f5a7c4a5f714ec9c53b252 - SHA1:a8eff6f5dcf5e2dcc6c1eefffc99951543612c2a [weak] - MD5Sum:81ae2c24b7cc23144890c2db0cb64df5 [weak] Release file created at: Mon, 19 Oct 2020 10:07:06 +0000 Get:16 https://minio.k-space.ee/armbian/apt focal/foca…

Is something wrong with armbian? On my BPI M1, I get this apt error today. Err:6 https://apt.uk.armbian.com stretch Release server certificate verification failed. CAfile: /etc/ssl/certs/ca-certificates.crt CRLfile: none Reading package lists... Done E: The repository 'http://apt.uk.armbian.com stretch Release' does no longer have a Release file. N: Updating from such a repository can't be done securely, and is therefore disabled by default. N: See apt-secure(8) manpage for repository creation and user configuration details.

All of our tinkers are rock solid after removing network-manager and going with wpa_supplicant. Today I apt update/upgrade and it brought network-manager back which killed our connectivity. When I apt remove network-manager it also is removing armbian-config which I don't want to happen. armbian@term1:~$ sudo apt-mark hold network-manager network-manager set on hold. armbian@term1:~$ sudo apt install armbian-config Reading package lists... Done Building dependency tree Reading state information... Done Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that…

I have a newly-installed Armbian_5.25_Orangepizero_Ubuntu_xenial_default_3.4.113 image. I find that I am unable to successfully upgrade the image. Note that operations like 'apt install hostapd' complete without problems. A transcript of my attempts follows. upgrade.log

Recently when I run apt update I receive a message that an update is available. When I run an apt list --upgradable it shows the following: mark@station-m2:~$ sudo apt list -a --upgradable Listing... Done armbian-bsp-cli-station-m2-current/bullseye 24.5.1 arm64 [upgradable from: 23.8.1] armbian-bsp-cli-station-m2-current/bullseye 24.2.1 arm64 armbian-bsp-cli-station-m2-current/now 23.8.1 arm64 [installed,upgradable to: 24.5.1] When I run apt upgrade I get the following output: mark@station-m2:~$ sudo apt upgrade Reading package lists... Done Building dependency tree... Done Reading state information... Done Calculating upg…

Hello, Cubietruck user here After successful update using sudo apt-get update && time sudo apt-get dist-upgrade I'm no longer able to update. Any call to apt-get with any params gets me "Bus error" message. I've tried to clean up /var/cache/apt with no luck (the only solution across internet I found) File: /etc/apt/sources.list deb http://httpredir.debian.org/debian stretch main contrib non-free deb http://httpredir.debian.org/debian stretch-updates main contrib non-free deb http://httpredir.debian.org/debian stretch-backports main contrib non-free deb http://security.debian.org/ stretch/update…

Hi, I add a custom repository in customize-image.sh by echoing it in /etc/apt/sources.list.d/custom.list and then calling apt-get update when i build i get always the following error: [💲|🔨] Ign:1 http://apt.customrepo.com bookworm InRelease [💲|🔨] Ign:2 http://security.debian.org bookworm-security InRelease [💲|🔨] Ign:3 http://deb.debian.org/debian bookworm InRelease [💲|🔨] Ign:4 http://deb.debian.org/debian bookworm-updates InRelease [💲|🔨] Ign:5 http://deb.debian.org/debian bookworm-backports InRelease [💲|🔨] Ign:1 http://apt.customrepo.com bookworm InRelease [💲|🔨] Ign:2 http://security.debian.org bookworm-security InRele…

Hi, this error is related to https://forum.armbian.com/topic/16406-armbian-server-maintenance-0430utc-dec-10-2330est-dec-9/ ?

Hello all, Since a good year I'm using several Orange Pi's,yes several... And while doing some apt update/upgrade I'll see errors and want to know how to handle... 1) Showing up : Get:45 http://apt.armbian.com jessie/jessie-desktop Translation-en [178 B] Ign http://apt.armbian.com jessie/jessie-desktop Translation-en Question: What does this "Ign" mean and what to do that this error disappear? 2) Showing up on the end : Reading package lists... Done W: Duplicate sources.list entry http://security.debian.org/ jessie…

Hey everyone, im running armbian on a X96 MAX (S905X2) android tv box as a pihole server. Distributor ID: Ubuntu Description: Ubuntu 19.04 Release: 19.04 Codename: disco unfortunately sudo apt-get update gives me this: (i did try to mess around with the repository settings in the meantime adding a ppa wich didnt help and potentially made it worse but i dont know how to revert the repository state back to its original state) Hit:1 http://ppa.launchpad.net/numix/ppa/ubuntu groovy InRelease Ign:2 http://ports.ubuntu.com disco InRelease Hit:4 http://ppa.launchpad.net/webupd8team/java/ubuntu xenial InRelease Ign:5 http://ports.ubuntu.com …

Hello.. I'm using Armbian v5.71 on Orange Pi Plus 2E with kernel: version 3.4.113-sun8i. I didn't touch the /etc/apt/sources.list file This is ~third day that I can not do the apt-get update without error. The output is: root@orangepiplus2e:~# apt-get update Hit http://security.debian.org jessie/updates InRelease Hit http://apt.armbian.com jessie InRelease Get:1 http://security.debian.org jessie/updates/main armhf Packages [636 kB] Get:2 http://apt.armbian.com jessie/main armhf Packages [413 kB] Hit h…

Hi All, Please advise, started a few days ago. haven't done any changes. Debian Stretch: Armbian Linux 4.14.150-odroidxu4 :~# apt-get update Hit:1 http://security.debian.org stretch/updates InRelease Get:3 https://download.docker.com/linux/debian stretch InRelease [44.8 kB] Ign:4 http://httpredir.debian.org/debian stretch InRelease Hit:5 http://httpredir.debian.org/debian stretch-updates InRelease Hit:6 http://httpredir.debian.org/debian stretch-backports InRelease Hit:7 https://apt.syncthing.net syncthing InRelease Ign:2 https://armbian.tnahosting.net/apt stretch InRelease Hit:8 http://httpredir.debian.org/debian stretch Rel…

Hi guys, I've got one huge problem and no idea how to solve this. Im on the latest 5.20 armbian on a cubietruck an lately I had some troubles running different programs like wget or curl. They only showed some weired characters in the terminal and quited with a common error. I had to reinstall theses apps in order to get them working again. But unfortunately it looks like some of the programs from the apt package are also not working. If i run apt-key nothing happens and I only see the command prompt. root@cubietruck:/home/albuntu# apt-key root@cubietruck:/home/albuntu# This only happens when booting from nand. Every nigth I make a copy to the sata drive. So I bo…

Hi to all: I run a odroid N2: / _ \ __| |_ __ ___ (_) __| | | \ | |___ \ | | | |/ _` | '__/ _ \| |/ _` | | \| | __) | | |_| | (_| | | | (_) | | (_| | | |\ |/ __/ \___/ \__,_|_| \___/|_|\__,_| |_| \_|_____| Welcome to Armbian 20.11.6 Focal with Linux 5.9.14-meson64 System load: 18% Up time: 20 min Local users: 3 Memory usage: 20% of 3.55G IP: 192.168.5.70 CPU temp: 43°C Usage of /: 11% of 57G Try to install a sonso api on my system. After a reboot i get a strange error with python . …

Hello everybody, When I go apt update with my Banana PI (http://ix.io/1iAo) it hangs on apt.uk.armbian.com (since days!). Other apts work. Err:8 http://apt.uk.armbian.com xenial InRelease Could not connect to apt.uk.armbian.com:80 (51.140.55.58), connection timed out Reading package lists... Done Building dependency tree Reading state information... Done All packages are up to date. W: Failed to fetch http://apt.uk.armbian.com/dists/xenial/InRelease Could not connect to apt.uk.armbian.com:80 (51.140.55.58), connection timed out W: Some index files failed to download. They have been ignored, or old ones used instead. Is the apt mirror down? Shoul…

I was initially overjoyed to find these loads for the Macchiatobin, as they allowed me to install a boatload of software including drivers for a PCIe device. Unfortunately. it appears that the U-Boot version (21.01) does not enumerate the PCIe bus correctly. As a result, I can't test that PCIe device. The relevant failure is: PCIE-0: Link up (Gen2-x2, Bus0) PCI: Failed autoconfig bar 10 PCI: Failed autoconfig bar 14 PCI: Failed autoconfig bar 10 PCI: Failed autoconfig bar 14 pci command output is: => pci 0 Scanning PCI devices on bus 0 BusDevFun VendorId DeviceId Device Class Sub-Class _____…

Install arduino on Nano pi m4 and asus thinkerboard with os armbian and arduino uno wifi rev2 board connected to USB Arduino allways complains with : avrdude : usbdev_open() : cannot open device : Permission denied avrdude : jtag3_open_common() : Did not find any device matching VID 0x03eb and PID list : 0x2145 Nevertheless I belong to group dialout and permissions on /dev/ttyACM0 are crw-rw---- Tried everything what was explained on internet about the topic but without any result !! The same issue on the ASUS Thinkerboard !! When I do "Get board info" then arduino detect the board correct !! ( BN:Arduino Uno Wifi Rev2 , VID:0x…

I followed instruction of adding overlay at http://linux-sunxi.org/1-Wire This resulted in an error during boot and non functional 1-wire: Removing "#" comments from armbianEnv.txt resolved the issue Can you please confirm if comments are allowed in armbianEnv.txt? Thanks

Hello, It seems a few weeks ago linux-headers-3.4.113-sun8i package was removed from armbian repo. Is it persistent? How I can get it? Thank you. -- BR Oleg

The GPIO pins on the Rock64 are very similar to the Raspberry Pi's GPIO, except the Raspberry pi calls pin #19 GPIO 10, pin #21 GPIO 9 and pin #23 GPIO 11. Where as the Rock64's pin #19 is GPIO3_A1, pin #21 GPIO_A2 and pin #23 GPIO3_A0. The Rock64 documentation does say that it is quasi-Raspberry Pi compatible, but it's hard to find anyone who has actually tested this. Here is the GPIO layout of the Rock64, compared to the Pi 3 I'm currently trying to figure out if a display such as THIS can be connected to the Rock64's GPIO pins without any major issues. User documentation for the display can be found HERE on page 2, in the PDF named …

Are there any plans to create an Armbian image for the Radxa Cubie A7S? It's a really cute single-board computer with a powerful Allwinner A733 SoC.

Breaking the ice here. So hello everyone. I am still entry into SBCs and have been loving every moment of it. I started with the Raspberry PI 3B, and have recently been playing with the new Asus Tinkerboard. One of my SBC projects is to build a little media streaming device for some dumb monitors with HDMi input I have lying around. The Tinkerboard was very appealing to me because of its gigabit Ethernet, I thought it would make a much better quality internet streaming device. We seem to be lacking a browser for ARMh7 that can support Netflix and other like services playback. chromium is missing the needed WideVine plugin, and I have yet to find a …

Does anyone know of an ARM-based single board computer that stores its boot firmware in SPI flash and has write protection mechanisms (e.g., screws, pins, jumpers, etc.) for said SPI flash? The ROCK 3A has something like it, but I don't think the mechanism uses an SPI flash chip's intended WP control pin.

Hi, I'm interested in getting a compact ARM-based processor (something like a RPI or ASUS TinkerBoard) that can output a 2560x720 output resolution. The current available documentation seems quite sparce and Google searches are littered with people having problems with establishing their chosen video resolutions so I am sceptical! Any pointers would be gratefully received. Thank You, Dave

I've built Armbian for my purposes with the following build settings: ./compile.sh BOARD="bananapi" BRANCH="current" RELEASE="focal" \ KERNEL_ONLY="no" KERNEL_CONFIGURE="no" BUILD_DESKTOP="no" EXTERNAL="yes" \ INSTALL_HEADERS="yes" .. and the board boots from the resulting image just fine, and seems to be running well. Now, I want to clone a repo onto this board, and use the ONBOARD compiler for development purposes .. I'm doing some CAN development, and I want to use SocketCan (https://github.com/jackthompsonnz/socketcan-linux-5.0.git) which is a kernel module for gaining access to a USB-CAN adapter. So I connect to it, clon…

Just installed armbain for a orangepi zero plus 2 H3 setup the root and usernames credentials. I am able to login under root in putty, but sudo armbain-config is not found.

Hi, I am trying to mount a NFS share from a NAS, it work flawlessly on my pc (Arch) but on my odroid (Armbian), only NFSv3 works, not NFSv4. $ sudo mount.nfs -vvv 10.10.0.131:/volume1/Owncloud data rw mount.nfs: timeout set for Wed Jun 1 12:01:19 2016 mount.nfs: trying text-based options 'vers=4,addr=10.10.0.131,clientaddr=10.10.0.130' mount.nfs: mount(2): No such file or directory mount.nfs: trying text-based options 'addr=10.10.0.131' mount.nfs: prog 100003, trying vers=3, prot=6 mount.nfs: trying 10.10.0.131 prog 100003 vers 3 prot TCP port 2049 mount.nfs: prog 100005, trying vers=3, prot=17 mount.nfs: trying 10.10.0.131 prog 100005 vers 3 prot UDP port 4…

After upgrade to Debian Bullseye MOTD is displaying as below. Is (will be) Bullseye supported? BTW. I have also noticed that package armbian-tools-buster does not have equivalent armbian-tools-bullseye [root@PKOTHER /etc/update-motd.d]# cat /etc/armbian-release # PLEASE DO NOT EDIT THIS FILE BOARD=orangepiplus BOARD_NAME="Orange Pi+" BOARDFAMILY=sun8i BUILD_REPOSITORY_URL=https://github.com/armbian/build BUILD_REPOSITORY_COMMIT=f3a8c1769-dirty DISTRIBUTION_CODENAME=bullseye DISTRIBUTION_STATUS=csc VERSION=21.05.8 LINUXFAMILY=sunxi ARCH=arm IMAGE_TYPE=stable BOARD_TYPE=conf INITRD_ARCH=arm KERNEL_IMAGE_TYPE=Image

Greetings, I set up an an armbian build environment, and went through the initial build, which took some time. Subsequent rebuilds took a couple hours as well, and I discovered I could 'skip' rebuilding the kernel unless I wanted to build it. Now, I'm testing customize-image.sh, things aren't always going where I want. so, I troubleshoot, make changes, but now my minimum build time is 30-40 minutes. Is there something else I can do to speed up the process?

Hello All, I finally got Armbian for the BPI-R2 installed and I must say, it is the best OS I had ever used on it. It makes the BPI-R2 usable now, which is great since it is very good hardware. I plan to use it just as a server (no desktop plans, as that could get too painful). If any BPI-R2 tests need to be done or the such, please let me know. ta, t.

Hi, After the latest website changes, downloads of the Debian versions went deeper and I have a feeling that Ubuntu versions are promoted. I used to use Debian in development as it is developed more rapidly. Are there any plans for the future in this area? As much of my work is script based that may mean a big change for me... Thanks...

I want to use armbian along with freeipa. how can I disable the automatic user login (that is created during installation). how can I enter another username to login (freeipa user) 10x

Hello every body, I need some help, I can't install Citadel mail server on my Nanopi duo2 board. Previously i try to install ISPconfig mail server on default armbian-config but not work, then i try Citadel because I already have a little familiarity with this program. After write IOS on mem card and updade/upgrade command I followed the guidelines of the Citadel website which is to execute the following commands: "curl http://easyinstall.citadel.org/install | bash", but after downloading and starting the installation, many error messages appear due to lack of space. Below is some information from my system: IOS version: Armbian_20.05.4_Nanopiduo2_focal_current_5…

Is there a difference between installing Armbian and then OMV via Softy vs the OMV images?

Hello, I test to prepare a sd with the fresh install with the last image in the website 5.25. I installed Apache2 php5 mariadb and it works but when I reboot the system apache don't start it tell that /var/log/apache2 not found. The I created the directory apache2 and restart apache manually => ok it start. I reboot the system and again it failed withe the same message !*I go to /var/log/ and not see the apache2 created .... Thanks for help

Hello together, I just can't get VLC to work with 1080p mp4 on Armbian 22.02 Bullseye. The video starts, but it jerks enormously. 720p on the other hand runs perfectly. Does anyone have any ideas? best regards, Mike

Dear Friends, I have been testing Armbian 22.04 Current CLI version and 22.01 Edge Jammy CLI and both does not reboot. When I reboot Armbian the LEDs stop to blinking but I can clearly listen the rust-drives spinning, also the LCD is still active. Initially I though it was because the software that handles the LCD but I made a test without it and it was the same. I also thought that was because the spin drives, but when I did the test I made it without the disks as well, therefore I excluded both cases. Since I didn't read anything about it, I think this issue is affecting just me, any idea where I may look to find out what …

I downloaded the "Armbian 22.11 Jammy" image today and it won't boot, the red light won't come on most of the time (it does occasionally). I will no longer report the situation of my SD-card, power supply, and burning tools. In short, they are all fine, and I am a person who often burns Armbian' images, so I can say that I am very experienced. After repeated attempts, I downloaded "Orangepizero2_3.0.6_ubuntu_jammy_server_linux5.16.17" from the OPI official website, made a boot disk with the same method, and it can boot normally... OPI Hardware Version: V1.5 SD-Card: Sandisk Extreme 64G V2, buy from official store Power supply：3A adaptor, from …

$ ip link 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP mode DEFAULT group default qlen 1000 link/ether 68:27:19:ad:02:09 brd ff:ff:ff:ff:ff:ff $ sudo lshw -C network *-network description: Ethernet interface physical id: 7 logical name: eth0 serial: 68:27:19:ad:02:09 size: 100Mbit/s capacity: 1Gbit/s capabilities: ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation …

Hi, i have installed the latest Armbian 23.5 Jammy on my opi+2e and since then, only the top left of the screen is showing text, like if the screen is divided in 4 and only the upper left is showing login screen and text. If I try to install a desktop environment, everything goes full screen, but I see the mouse cursor of login screen overlapped to desktop, so i have two mouse cursors: one fixed and the other that can be moved. WTF is going on? Why don't you test the images before you publish?

Hello, i installed Armbian 23.8 on my ROCKPI E. When i put a LAN cable into END0, everything is quiet, no leds are glowing. END1 works normal. I used nmtui and tried to activate it. Do i have to add somewhere end0? is this port not automaticly configured? thank you

Armbian build: Armbian_23.8.1_Bananapim2zero_bookworm_current_6.1.47 Hardware: BananaPi M2 Zero I am using pure CLI environment, and when the output is on screen I can't really tell what is the resolution or the refresh, but the monitor is 1080p@60 and it seems to be matching. Although when I run apps that use SDL2 for example; the resolution is changed, and I tried to set a fixed resolution but there seems to be no way to do so in Armbian. I changed the boot settings and those are correctly set with 1080p@60; then I tried to use xrandr (I have X11 installed as I have SDL2 installed too), and it says "can't open display" (I assume …

Armbian 5.15.26-sunxi64 kernel breaks GPIO on NanoPi NEO2 Armbian 5.15.26-sunxi64 (bullseye) NanoHatOLED fails: - GPIO devices are missing; - /proc/cpuinfo lacks Processor, Hardware info. root@nanopineo2:~# uname -a Linux nanopineo2 5.15.26-sunxi64 #trunk.0002 SMP Thu Mar 3 10:24:53 UTC 2022 aarch64 GNU/Linux root@nanopineo2:~# gpio readall piBoardRev: Unable to determine board revision from /proc/cpuinfo -> Is not NanoPi based board. -> You may want to check: -> http://www.lemaker.org/ root@nanopineo2:~# cat /tmp/nanohat-oled.log open of gpio 0 returned -1: No such file or directory error opening gpio sys…

Hi all, I have just deployed the 5.2 Armbian version (desktop) on my OrangePiLite but the first boot seems to cause issues - I have an USB mouse and keyboard connected but during the bootprocess I receive the messages: usb 7-1: new low-speed USB device number xx using sunxi-ohci generic-usb 0003:....... input,hidraw-: USB HID v1.11 Mouse on usb-sunxi-ohci-1/input0 However, these messages just repeat and are counting. I can not do anything else, this step comes up after I have created a new user and assigned a new password. Thanks for help and advice.

Hello, I try to install this module https://github.com/lucidm/lcdi2c for Linux orangepipc 4.13.9-sunxi #1 SMP Tue Oct 24 10:21:11 MSK 2017 armv7l GNU/Linux on Orange Pi PC. Module was successfully compiled but after performing the command: make -C /lib/modules/$(uname -r)/build M=$PWD modules_install module is installed in folder: /lib/modules/4.13.9/extra instead of: /lib/modules/4.13.9-sunxi/extra additional screenshot: SCREEN.PNG According to this doc www.kernel.org/doc/Documentation/kbuild/modules.txt the modules_install command use $(KERNELRELEASE) as a path folder. (i.e. -r, --kernel-re…

I have been using Armbian with orange pi for a while now, PC+, Zero+ 2 and other H3 models, recently with Armbian 5.59 (also tried 5.62) I have been encountering an issue where WiFi is not properly working, I add WiFi credentials to "/etc/network/interfaces", then reboot, the WiFi is up for a few seconds after booting and DHCP server assigns an IP to the board, then WiFi just goes down again, this is the log on serial interface: Oct 4 18:09:44 localhost wpa_supplicant[1213]: Delete '/run/wpa_supplicant/wlan 0' manually if it is not used anymore Oct 4 18:09:44 localhost wpa_supplicant[1213]: Failed to initialize control int erface '/run/wpa_supplicant'.#012You…

root@orangepizeroplus2:/# modprobe gc2035 modprobe: FATAL: Module gc2035 not found in directory /lib/modules/4.14.67-sunxi64 root@orangepizeroplus2:/# modprobe vfe_v4l2 modprobe: FATAL: Module vfe_v4l2 not found in directory /lib/modules/4.14.67-sunxi64 OrangePi ZeroPlus H5, use armbian official build, but no gc2035+vfe_v4l2 module? I heared of these modules already built-in?

Опубликовано: только что · Hidden - This content must be approved before it can be edited. HOT NEWS!!! With Armbian Armbian 23.02.2 Jammy with Linux 5.15.93-rockchip64 on (rockpi-4b plus v.1.72) Add (do it elso on all booting fevices = MMC, NVME, MPD, SD) the following lines to /boot/armbianEnv.txt overlays=spi-jedec-nor param_spinor_spi_bus=1 Reboot If you shorted 23-25 pins in 1.) then: disconnect them after the ROCK Pi 4 fully boot's enable spi-nor by executing (as root): echo spi1.0 > /sys/bus/spi/drivers/spi-nor/bind verify that the SPI mtd interface is enabled by running ls /dev/mtdblock0 if the last comman…

Hi I've been looking for a live dist for my Orange Pi Plus2, but there really doesn't seem to be one. I installed Armbian with all software I need to a microsd and figured it must be possible to make the whole system read-only somehow. Would someone care to explain how this can be done?

Hi i'm looking for a nice linux ARM distro that i could use as a VM on Apple Silicon (through Parallels Desktop). Is it possible with armbian and if so, any tuts available ?

Hi guys I's possible to convert .bin file to text file. Could someone help me to do that. thank you

I have orange pi pc+. i downloaded armbian bionic with kernel 4.19, when I connect an ethernet cable sometimes, he doesn't see it, when he see it i have very slow connection, even wifi faster than ethernet, what can I do?

Hi, yesterday i did as usual an apt-get update/upgrade on my Armbian 19.11.3 (on a good old and always well working Bananapi M1). After that the desktop starts, but without showing the taskbar anymore. It was some kind of invisible, when i clicked the the upper left corner, the menu drops down. Unfortunately nearly nothing starts by clicking. The preferences are shown without any icons. Ok, time for a fresh install. I took the latest stable image Armbian Bionic 19.11.6 and put it on a SD card. System starts in console mode, i did all the setup stuff and installed the desktop. But the fresh installed desktop also started without the taskba…

I have been following a project on git hub and none of the commands work like the project as I have Armbian Focal installed. I need Armbian Bionic with Linux opiz2b 4.19.57-sunxi #5.90 SMP or 4.19.127-sunxi. I realise this is from 2019 and may be too old now to do anything with it. Is it possible to still get this? I can only find minimal versions in the archives that are much newer than this. I have to state here that I am a complete novice at this and so really have no idea what I am doing.

Hi, i have a problem, on my first boot i cant use my Keyboard because Armbian doesnt recognized it. i use Bookworm as an Image

Hello friends, I apologize for such a noob question, but I was not able to find the answer in the forums, nor via duckduckgo. Since the 23.08 upgrades were released (thank you again to team Armbian!), I noticed that the "default" image for the Orange Pi 3 LTS is Armbian 23.8 Bookworm. The minimal CLI image weighs in at 267Mb. My OPi3LTS SBCs are all running Armbian Jammy 23.08. The minimal CLI image weighs in at 195Mb. My understanding is that Jammy is Ubuntu (22.04.3 LTS), and Bookworm is Debian (12.0). But also Ubuntu Jammy is based on Debian Bookworm/sid. My questions are as follows: 1. What goes …

Hello In raspberry pi there is an option to add a boot splash screen, looking in this forum I havent found and instructions or if it is even possible. I am not interested with u-boot splash screen but when the Linux start booting. I am using 3.5" SPI LCD and I do see the boot logs when the Linux is loading. So my question is if there is any guide of how to do that boot splash screen in Armbian or there is no way to do that?

I wanted to update my tinkerboard and my nanopi m4. I tested the following versions: - Armbian_5.98_Nanopim4_Ubuntu_bionic_default_4.4.192_desktop - Armbian_5.95_Tinkerboard_Ubuntu_bionic_default_4.4.190_desktop - Armbian_5.95_Tinkerboard_Ubuntu_bionic_default_4.4.190 with most of the ppa that I add I have the same error: 404 Not found [IP: 2001:67c:1560:8008::15 80] E: The repository 'http://ppa.launchpad.net/mutlaqja/libgphoto2/ubuntu focal release' does not have a Release file. N: Updating from such a repository can't be done securely, and is therefore disabled by default N: See apt-secure(8) manpage for repository creation and …

Hi, I am unable to build any images for orangepi SOCs specifically orangepilite, orangepilite2 and one plus. Always returned error halfeway. Following is a sample of log when I compile image for orange pi lite. Please me some guidance on how to resolve this. My steps: run sudo compile.sh -- "Do no tchnage the kernel..." --> "orangepilite"--> either current or legacy --> either "buster" -->"Image with console inter..." -->"Standard image with ..."compilation.log

Greetings, I built armbian with these instructions (https://docs.armbian.com/Developer-Guide_Build-Preparation/#using-our-automated-build-system) I am now wondering: How can I provide specific packages, files, or config to my built image? For instance: I'd like to have the gpio utilities installed, other deb packages I might want, wireless firmware, and even wireless config. Thanks!

I'm trying to build Armbian desktop image in 64-bit uBuntu and it does not complete. When I build the server it completed nicely no problems. Displaying message: Adding APT Source deb [signed-by=/usr/share/keyrings/githubcli.gpg] http://cli.github.com/packages stable main Displaying message: Adding GPG Key /home/hydra/armbian/config/desktop/_all_distributions/appgroups/programming/sources/apt/githubcli.gpg Displaying message: Updating package list bullseye info Displaying message: Upgrading base packages Armbian info Displaying message: Installing the main packages for Armbian info Displaying message: Installing the desktop packages for Armbian info Disp…

I am working onPC + . Both of them have arm 32 bit microcontroller. I want to build image. (just need to use menuconfig) But when i want to do that. I got an error message. Is there any way to use it on 32 bit? [ .... ] Please read documentation to set up proper compilation environment [ .... ] http://www.armbian.com/using-armbian-tools/ [ error ] ERROR in function prepare_host [ general.sh:958 ] [ error ] Running this tool on non x86-x64 build host is not supported [ o.k. ] Process terminated

This message is on-topic, but for an unknown reason, it is not possible for me to create a message in Help wanted. So I post here. I have used Armbian for two years, I think, on several devices, and I have given some money to support it. Thanks for the job. I recently upgraded to the last version with Debian 11. Everything fine but one point which is probably not a bug, that's why I don't post in "bugs". I use Unbound which is the heart of my soft. And I use a python script which is loaded by Unbound. Until now, there was no problem. With the last version, I ran in several read problems. The first reason I found is apparmor, which prevented the script to o…

Hi! Can someone point me to a tutorial/documentation on how to setup a DS3231 RTC module on Armbian Buster? I'm currently using a Tinker Board S with Armbian 5.9.14. My RTC is correctly connected to my board. It is detected: sudo i2cdetect -y 1 0 1 2 3 4 5 6 7 8 9 a b c d e f 00: -- -- -- -- -- -- -- -- -- -- -- -- -- 10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 30: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 40: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 50: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 60: -- -- -- -- -- -- -- -- 68 -- -- …

I can not raise the Access Point. Already my head is spinning on the number of tried recipes from the Internet. Service information here. Help me please. Configuration files: /etc/hostapd.conf ssid=BananaPI-WiFi interface=wlan0 hw_mode=g channel=5 bridge=br0 driver=nl80211 logger_syslog=1 logger_syslog_level=2 wmm_enabled=1 wpa=2 preamble=1 wpa_psk=c86e997b3dceff9bd7ffaf3f7353099a301c2**********d10a892c33cafcb5db wpa_passphrase=10********IV wpa_key_mgmt=WPA-PSK wpa_pairwise=TKIP rsn_pairwise=CCMP auth_algs=1 macaddr_acl=1 noscan=0 ### IEEE 802.11n #ieee80211n=1 #ht_capab= #country_code=US #ieee80211d=1 ### IEEE 802.11n ### IEEE 802.11a #hw_mode=a ### IEEE 802…

After a long time not using my cubietruck i decided to install the new Armbian Buster to it. I installed the xfce gui and now the gui is very very slow. If i move a window it tooks about 1-3 seconds till i see its moved. Complete gui is very juddery. The Task manager in debian buster shows the cpu and memory is not always on 100% although xfce is very slow. How can i fix this? Can it be cause i use a few years old 64gb samsung micro sd? If it's because the cubietruck is too old and slow can you recommend another newer much faster system?

I am setting up a new Odroid HC1 and have installed Armbian Buster from https://www.armbian.com/odroid-hc1/. Attempting to run iptables, I first had the problem: iptables/1.8.2 Failed to initialize nft: Protocol not supported Attempting to use legacy, I used the command: update-alternatives --set iptables /usr/sbin/iptables-legacy But then had the error: modprobe: ERROR: ../libkmod/libkmod.c:586 kmod_search_moddep() could not open moddep file '/lib/modules/4.14.180-odroidxu4/modules.dep.bin' modprobe: FATAL: Module ip_tables not found in directory /lib/modules/4.14.180-odroidxu4 iptables v1.8.2 (legacy): can't initialize iptables table `filte…

Hi all. Any ideas how to address this problem with apt-get/apt package manager? This system: Welcome to Armbian 21.02.3 Buster with Linux 5.10.35-rockchip64 Hit:1 http://security.debian.org buster/updates InRelease Hit:2 http://httpredir.debian.org/debian buster InRelease Hit:4 http://httpredir.debian.org/debian buster-updates InRelease Hit:5 http://httpredir.debian.org/debian buster-backports InRelease Hit:3 https://armbian.hosthatch.com/apt buster InRelease Error: No information about packages! (Maybe no deb entries?) Reading package lists... Done E: Problem executing scripts APT::Up…

Hello together, I want to know, it is possible to switch from BUSTER to BULLSEYE ?? I use the ARMBian for Rock PI4 with DEBIAN-.Buster and I plan to change it to Bullseye.... If there any reason, problems, etc. for do this? Best regards Matthias

Hi, I wanted to install Armbian to my old Asus eee PC. So I made live USB containing the .iso and boot from there. I can login as root fine, but when running armbian-install, I only see the option of installing to sdb (my USB drive), but not to my sda (the laptop local drive). I am not sure what's the problem. Do I have to do something to the partition in sda? Currently Alpine Linux is installed in the local drive. Previous installation was Lubuntu (14, I think?). I want to run pi-hole and there are not many supported OSes for pi-hole that still support x86, so I would like to make it work. Armbian version: Armbian 25.5.1 Bookworm Minimal

Hi, I downloaded Armbian Bionic for OrangePi Lite from: https://www.armbian.com/orange-pi-lite/ and everything works fine, except audio recording from microphone. Error: root@orangepiserver:~# arecord test.wav ALSA lib confmisc.c:767:(parse_card) cannot find card '0' ALSA lib conf.c:4528:(_snd_config_evaluate) function snd_func_card_driver returned error: No such file or directory ALSA lib confmisc.c:392:(snd_func_concat) error evaluating strings ALSA lib conf.c:4528:(_snd_config_evaluate) function snd_func_concat returned error: No such file or directory ALSA lib confmisc.c:1246:(snd_func_refer) error evaluating name ALSA lib conf.c:4528:(…

Hi I would like to hear what is the different software alternatives for streaming from a Tinkerboard with a Logitech c922 pro with sound to a cctv controllpanel like blue iris, Shinobi or Home Assistant. I would like for a easy install and setup or just easiest as everything I do seems to take x4 the time of what others do 😅 Hardware & OS OS: Armbian (23.02.2) armv7l Host: Rockchip RK3288 Asus Tinker Board Kernel: 6.1.11-rockchip Packages: 1618 (dpkg), 8 (snap) Shell: bash 5.1.16 Resolution: 1920x1080 CPU: Rockchip (Device Tree) (4) @ 1.800GHz Memory: 575MiB / 2004MiB Logitech c922 pro …

Hey, So basically as the title says. If i install the CLI version of armbian on the OPI 3 lts it works fine for a while but than randomly starts locking up and saying (Look attached image) I don't know why this is happening. Ive also tried the one with a desktop and i didn't seem to get that error ever?

Anyone interested in coaching me a little bit on Armbian? I typically pay $65/hr. I'd like 1-2 hour sessions 9-11am CST and would like to cover the following: Installing armbian to EMMC on nano pi. Creating a master image and automating installation of it via SD card eflasher type system. Getting ethernet to work on NanoPi Core. Integrating drivers. Thanks Derek

I am using my Orange Pi as a Pi-Hole and also to run a discord bot of mine I am having the issue with this repo where I can install packages with `pnpm install` will run and work fine, but when i move to use `pnpm compile` which uses Parcel to compile the codebase from TS and etc to workable JS, I run it and it starts that command and then the Putty terminal I use to remote into my OrangePi (which is on my LAN) from my Windows 11 machine gets a "remote connection terminated" which generally just happens when the remote restarts. Any idea why this may be happening? Spoiler $ armbianmonitor -U 1 2 ### Activated 1 lzo-rle zr…

Hi, I have search in the internet a long time but can't get an answer for: Can I start a Armbian Cubietruck Image on my Ubuntu-Linux (x64) with QEMU? What I tested: a) I downloaded "Debian Server Mainline" (Kernel 4.14) from https://www.armbian.com/cubietruck/ b ) Mounted the Image and extracted "vmlinuz-4.14.14-sunxi" and "initrd.img-4.14.14-sunxi" c) Try to start the Armbian Image on my x64 Linux with: qemu-system-arm -m 1024M -M vexpress-a9 -kernel ./vmlinuz-4.14.14-sunxi -initrd ./initrd.img-4.14.14-sunxi -append "root=/dev/mmcblk0p1 rw rootfstype=ext4 cgroup_enable=memory swapaccount=1 enforcing=0 console=ttyAMA0,1…

Hi, Im using orangepi pc with armbian jammy. On download section there is only 2 choices, CLI and Desktop. Is there a custom desktop version where most (or if possible all) applications are not installed? It would take too long is I uninstall it one by one. I think I only need browser and terminal.

Hi guys, I am currently working on backing up my armbian installation. Following situation: boot: sd card file system: nfs root backing up the file system is not an issue, there I am using a rsync logic that transfers only changed files, which works great. The problem is with the boot files. In case of sd card failure I need an image that I can quickly restore to a new sd card, without the whole file system, as it is on nfs root and backed up differently. Now my question is: what is the best way to create an image file with only the boot logic? On Raspbian this is simple, as the boot device is a fat32 partition, but on …

Hi everyone I Install the latest version of Armbian Debian for the TinkerBoard S but at the beginning I have the problem of seeing that the image is always distorted, it is similar to having interference, it had not happened before with other operating systems. It also sometimes turns off meaninglessly or the mouse stops working.

Hello guys, i need to know, armbian desktop comes with mali drivers and open gl drivers installed ? if not, how i can install without bugs ?

Hi Folks, this is just out of the blue but Armbian based on Devuan would be very cool. I find more manageable and predictable Devuan than Debian, I am slowing ditching Debian for Devuan, I recently tested both on some very little Linux compatible laptops and Devuan resulted in better compatibility and lesser weird issue with ACPI and LID operations. I use Runit as default init system and for desktop use I found it very stable: for instance when connected to the wifi printer if the printer goes in standby systemd is unable to reconnect to the scanner (you to restart sane) while runit is always on; there are plenty on these little cases where Devuan …

I try to boot Armbian build for Rock Pi Model B but the screen stays black. The Armbian Download Page says for Model SE use Model B builds. Is there a configuration that i can change to make it work. I hope somebody can help me.

I just got my tinker board r2.0 today and installed the cli version of armbian. But it seems the wifi module is not regocnized. So also in the armbian-config under network there is no wifi option with SSID and Password fields. Any Idea how I can get it up and running? Also the ifconfig -a command does not show wlan0

Hi, I need to compile armbian to set some kernel modules. Now the compiled kernel is installed and armbian is up. For some reason using armbin-add-overlay results in Missing dtc compiler in kernel headers directory. Please reinstall the kernel headers package I have installed the all packages I have build. . ├── linux-dtb-next-sunxi_5.53_armhf.deb ├── linux-headers-next-sunxi_5.53_armhf.deb ├── linux-image-next-sunxi_5.53_armhf.deb └── linux-u-boot-next-nanopineo_5.53_armhf.deb So the matching kernel headers should be installed.

Hi, trying to nut out the problem of being unable to restart after installation of the OMV Wireguard plugin. I have removed the wireguard-tools package and installed the 4 rockchip64 edge 6.1.11 packages. It took me a while to realise that armbian-config was not installing the headers when selected but wondering if there's a necessary order for installation ie linux-source-6.1.11-edge-rockchip64 first maybe? Sorry I realise how tedious it is supporting folks who are feeling around in the dark but I've wasted so many hours starting from scratch I either have to give up or ask for a tip. TIA

Hello Armbian community, I recently purchased a Odroid N2+ board and am trying different OS. I flashed Armbian_22.08.1_Odroidn2_jammy_current_5.10.139.img.xz on eMMC card. The first boot up works fine. I was prompted to set root password, new user credential and locals without any issue. I then used 'armbian-config' to navigate the different settings. In the system security menu, I applied the firmware update (that's what the menu called), I assume it runs apt update && apt upgrade. After completion, it prompts me to reboot. So I did. Then the Armbian cannot boot up anymore. I am using Odroid N2+ headless, so I can only see the board blue led not flashi…

I'm looking to update my current Armbian File server (orange pi plus). The main reason is to gain USB3 for faster file serving, particularly rsync. I have little need for most of the features available (bluetooth,wifi,gpio,audio,hdmi), just a stable, low-cost, box that has usb3/gigabit ethernet and doesn't need a fan. I was thinking of an orange pi 3 lts for this purpose-- it seems to run armbian, and it won't break the bank at 54usd shipped with case + power supply. Do you see any problems with this choice or have alternative choices?

I am trying to leverage the first run script but am not having any luck. Here are the steps that I am following: 1. flashed the image onto the SD card 2. mounted SDcard on my mac (also tried steps from linux) 3. renamed the file from armbian_first_run.txt.template to armbian_first_run.txt 4. Edited the contents of the file to include the following: FR_general_delete_this_file_after_completion=1 FR_net_change_defaults=1 FR_net_ethernet_enabled=1 FR_net_wifi_enabled=0 FR_net_wifi_ssid='MySSID' FR_net_wifi_key='MyWiFiKEY' FR_net_wifi_countrycode='US' FR_net_use_static=1 FR_net_static_ip='192.168.1.201' FR_net_static_mask='255.255.2…

hi, i want to generate an armbian version for olinuxino micro A10S card this card is not in the list proposed by the compile.sh tool is there a howto , which explain the procedure best regard

Hello, I've not found an Armbian version which states compatibility with Banana Pi M2 Zero. Is there a compatible version? My first guess would be the Banana PI M2. Is that so? I've tryied to search the forum but all I've found is something about compilation. Please help.

Hello, is there any system for this trash? : < I've probably searched everything Thanx!

Hi Is there Armbian for Banana pi p2 zero?

Dear all, I come with a basic question: is armbian for H3 advanced enough and without roadblocks future proof, or is it still risky? Should it soon become mainline or for one or more years, it will be mainly for advanced users? I need to set-up a Openelec platform with software DSP features (ALSA, LADSPA, SOX...). I need easy to setup audio features (over USB, I2S, HDMI). I'm far from being a Linux expert. I don' t know how to compile an image, I discover SBC world.... I don't want to enter in too steep learning curve, and be able to focus on my project. Are H3 and Orange pi products ok for me, or would you advice to go directly to Rpi? I understand that there…

i need to build armbian for multiple boards. is there way to do this? every board has its own kernel config and different install files set and the same cache files. for disk space economy

is there going/any armbian image for the N-1 odroid and if not will there ever be..was looking at giving that a go if i can find one..thkx ..phase