Off-topic

Hi, please suggest your advice for the best laptop as of today, while keeping the following considerations in view: i) Purpose: General Home Use but I will use some high end software like PHotoshop, Adobe series ii) Range: $600 max iii) Brand Preference: Dell or HP or any other you suggest iv) I will also watch movies on the same Suggest please. Thanks

___ ____ _ _ _ _ / _ \| _ \(_) | | (_) |_ ___ | | | | |_) | | | | | | __/ _ \ | |_| | __/| | | |___| | || __/ \___/|_| |_| |_____|_|\__\___| Welcome to Ubuntu Bionic with Armbian Linux 4.19.62-sunxi System load: 0.21 0.20 0.15 Up time: 18 min Memory usage: 44 % of 492MB Zram usage: 24 % of 246Mb IP: 192.168.1.71 CPU temp: 44°C Usage of /: 14% of 29G [ General system configuration (beta): armbian-config ] The emboldened line above message appears sometimes on login, but not always. I took it to mean that I needed to do something in armbian-config, but nothing is indicated or s…

In various fields of modern technology and life, we often hear the word "LED". Whether it is lighting, display, or communication, LED has become an irreplaceable technology. So, what is an LED light-emitting diode, and how does it work?

@Igor could we please change in /etc/update-motd.d/10-armbian-header from if [ $(echo $BOARD_NAME | wc -c) -ge 17 ]; then TERM=linux toilet -f standard -F metal $(echo $BOARD_NAME | sed 's/Orange Pi/OPi/' | sed 's/Nanopi/NPi/') else TERM=linux toilet -f standard -F metal $BOARD_NAME fi to if [ $(echo $BOARD_NAME | wc -c) -ge 17 ]; then TERM=linux toilet -f standard -F metal $(echo $BOARD_NAME | sed 's/Orange Pi/OPi/' | sed 's/NanoPi/NPi/') else TERM=linux toilet -f standard -F metal $BOARD_NAME fi this mean from Nanopi to NanoPi for the sed-command, because for the NanoPi Neo Core2 the toilet logo will put the 2 …

Hi folks, I upgraded my server towards a bigger machine and unfortunately neither my parents nor brothers need a reliable fileserver. So this little machine goes on sale. - Helios64 with all trays + 2 SSD inserts - Fully assembled - Original packaging - Changed the two fans for Noctuas in order to get an even more silent server What's missing is the Battery for UPS. Mine was faulty and caused me some random reboots. Condition is mint / very good. System is stable with 5.15.93 running OMV6. If you would like pictures of the machine itself please drop me a note.

A Beelink X2 by default boots into Android with KODI and can be interrupted to instead boot into Armbian off an SD card. It might be quite advantageous to use a microSD card to jump start Armbian installed on a USB stick plugged in. Cost is one reason: the TF cards cost what the Beelink does, and lots of us have lots of premium USB sticks at less than half the price. This way it could be easier to experiment and even have a personal USB stick for friends and family. When it comes to family media this would help everyone. Myself I'd try various home clouds and server schemes, and whatever wins, just run that from the TF slot later on. Plus if you …

Hello guys, I have a orange pi prime, how to use uart pin like PG8 ? I don't read it. I'm work on orange pi prime debian desktop resource (download from orangepi.org / resources) I'm installing orangepi_PC_gpio_pyH3 (lib files change *) & wiringOP. I dont read uart pins Also there is no script.bin file in the boot folder. What can i do ? * Thanks martinayotte

Banana Pi BPI-M4 use Realtek RTD1395 chp design ,it is a 64-bit quad-core A53 mini single board computer. It features 1 GB of RAM and 8 GB eMMC. It also has onboard WiFi for b/g/n/ac and BT 4.2. On the ports side, the BPI-M4 has 4 USB 2.0 ports, 1 USB TYPE C port, 1 HDMI port, 1 audio jack. support M.2 Key E PCIE 2.0 interface. The RTD1395 is equipped with a high-performance quad-core CPU,ARM cortex-A53,with 512K L2 cache embedded. the RTD1395 also integrates and efficient ARM Mali-470 Graphic Processing Unit(GPU) to accelerate 2D and 3D graphics processing. For acceleration of this OSD and 2K user interface,the built-in Streaming Engine of the RTD1395 provides commo…

.

I'm looking for current and upcoming PXE bootable SBCs. I guess if it has uboot on a SPI chip (like ROCK64, PINE64, espressobin, opi r1 ...) this is already a good indicator that it will support PXE boot. But I'm not 100% sure if PXE will really work, it seems to be rarely used for such boards. The only board I know which does not have uboot but can boot via PXE is the rpi 3. Maybe there are other ones. Some other boards like the nanopi duo could boot via a SPI chip attached to the respective GPIO pins. Maybe someone here knows other boards with PXE boot support or has tested it already?

So, finally today I am getting around to pulling trigger on (2x) ODROID-XU4, I go to AmeriDroid (US supplier), put 2 of them in cart and go off looking for emmc modules, only to come across: https://ameridroid.com/collections/storage-emmc-and-microsd/products/emmc-5-1-module-blank Has anyone seen / tested these? My internet search says no, but I thought I would ask anyway. If not, I guess it's my turn now to be the guinea pig. I think I will maybe get one of these and one "regular" emmc...

Hi guys . Im new on this, but I just install armbian on my orangePI litle and after wifi connect with my router the wifi icon disappear. how i canfix this . Thanks for any help.

Small question i bought 32G kingstone memory card class10 But when use SD Insight app it can't detect and recognize the company ■is that mean my card is fake??!! Note when use H2testw program it can read and write 30457MByte without error But !! THE WRITE SPEED WAS ONLY 6.79MByts/s And read speed was only 18.2MByte/s ■it class 10 how write speed only 6.7mb is that error or what???!!!

Hi all, does anyone know how to boot from a locgical volume? the volume group is located on a mbr-parted partition (/dev/sda5) Disk /dev/sda: 465.8 GiB, 500107862016 bytes, 976773168 sectors Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disklabel type: dos Disk identifier: 0x00002074 Device Boot Start End Sectors Size Id Type /dev/sda1 2048 499711 497664 243M 82 Linux swap / Solaris /dev/sda2 501758 976771071 976269314 465.5G 5 Extended /dev/sda5 501760 976771071 976269312 465.5G 8e Linux LVM I dont' dare to execute nand-sata-install 'cause …

They both look same and have same hardware design. So how can I know if the orange pi zero is lts?

Has anyone heard any news on where and when this is available ? some of the AliExpress stores just appears to be sold out of the 32gb ram version.

Hi, i need a gpio to trigger a key stroke. I had an raspberry pi zero and this worked for setting up an gpio to trigger a key stroke. For some reason I am not able to port this to my orangepi 3 lts H6 board. I think there is some confusion because there are two pin-controller? Do I have to set the right one anywhere? I thought the setting will be listed here like the raspberry did root@orangepi3-lts:~# cat /sys/kernel/debug/gpio gpiochip1: GPIOs 0-255, parent: platform/300b000.pinctrl, 300b000.pinctrl: gpio-79 ( |usb0_id_det ) in hi gpio-102 ( |gmac-3v3 ) o…

Hi there, Has anyone tried openRGB with armbian? I found a few references to Raspberry Pi and openRGB, but nothing really usable. I would like to build a Kubernetes cluster and use an RGB fan to display the status of the cluster (and of course try to cool it down). Thanks.

Requriments: 1-development board 2-Android phone 3-Usb cable Download termux to your phone. Install nmap and ssh to your phone in termux. Boot up your armbian device. Plug your phone. Go settings and turn on usb tethering. Find your armbian device with nmap. Connect it with ssh. Done If you like you can download x11vnc to armbian device and vnc viewer to your phone and use your phone as a screen and keyboard and mouse. All in one Thats how i like to control my orange pi one hope you like it

I realised thise high performance SBC. Tend to over heat very easily. Anyone has good recommendation?

I have an Orange Pi PC2 and burned a SD Card with Armbian for it. The device boots to a Login window wit a single input field. OK the docs say the root password is 1234 so likely 'root' is what I enter into the login field. I enter that, I then get a password prompt to I enter 1234 and press enter. I then get 'Login incorrect or forbidden by policy' !! Can anyone give me a clue?

Hi. Sorry if this is not the best place, I couldn't figure out where to put this. I wanted to download Cubieboard 2 image but all the links I get redirected to lead to 404 (all are linked to v5.24 images). I tried a few others, where Cubieboard (A10) has the same problem while Olimex Lime A10 images download fine. I didn't look at most other boards but I assume some other might be having the same problem.

Just a simple little question - I've moved my system to SATA, but there are still full OS on the SD Card: ~# ls /media/mmcboot/ bin boot dev etc home lib lost+found media mnt opt proc root run sbin selinux srv sys tmp usr var I would like to remove unused stuff to make some space.

.

You mean this?

we have a few Nanopi core 2 which all of them are installed. the person in charged has left the company, Now we want to SSH to them and they reject it. I used to the nmap command to view the status of port 22 , they show that port 22 are filtered. how can we access the nanopi?

Hi, No sure if this is the place to post this but here it goes. I use the Debian distro for my armbian deployments. Every time I deploy, and the system comes with systemd-resolved it gives me problems. I always have to remove it and use the /etc/resolv.conf file by it self. I would suggest removing this, it's not necessary or useful. -Cheers

Orange Pi Plus 2E, Armbian 21.02.1 Buster I can use Ethernet OR WLAN but not both connections at the same time. To use WLAN I have to disconnect the ethernet cable. Do you have any idea to solve this issue? Thanks

to reduce the noise level? For example I created a topic this afternoon that is irrelevant at best, misleading at worst and solves no problems for anyone. It would be best if it never got into the Google cache. But, failing that, can

Please help, I've tried everything.

in the last two days trying to down a file i get hit with some kind of take over my brower telling me to install some thing after i hit the down loads link not the down load it wants me to let me clear that right up on your site the PI files download link, i know better then click on that junk when popups like that happen it to the point i can't do anything but reboot the PC , i normally just read and learn and don't say a thing .. it's getting annoying not sure if anyone gets it or you all are a ware of some jerk trying to high jack my PC or anyone and only at that link .so far .

After boot up on the main tty ARMBIAN runs a script that prints out the current temp in centigrade. Where can I change this to use F instead of C? I did not see it in the armbian-config program.

Hi all, One question here. I am making an electronic design that was previously completed by a third party. It has a Raspberry Pi Zero 2W attached, an Ethernet controller module based on the ENC28J60, and an RJ45 connector. Here the Ethernet controller module is similar to the GeeekPi ENC28J60 Overlays HAT V1.02 board. Added: ENC28J60 's Main Specs ref: https://www.kukelec.com/products/ENC28J60-I--SS.html The issue is that the Raspberry Pi is unable to establish a network connection via Ethernet, as the ENC28J60 chip is not even recognized. I have checked the Raspberry Pi’s configuration, and it is correct and consistent with the chosen SPI pins. While …

Using Zorin 8, on ASUS mobo with Rosewell internal port adaptor (usb, sd, etc, all in one). Everything is working great, but... Did following steps, bluetooth is able to connect and headphones work, but have to fiddle around with settings every time I want to use my BT headphones. (Jam Transit Bluetooth headphones) Selected Iogear adaptor from Ubuntu Hardware Support list. Plugged in usb adaptor. Installed Blueman. Ran detection Went to Bluetooth in Settings and detected headset, ok. Device does not show up in Sound. Searched through various Ubuntu forum help sections, finally found that running the command : pulseaudio -k Then my BT headset appears…

There is an opensource wm that I'd like to use with Armbian. I have compiled and installed it, but would like to have it as a package. I have forked a repo that makes a .deb of this wm and built it with Shippable (so aarch64). I don't have any Debian mirror to host it... so... What is the standard way to build a package for Armbian? There are also other libraries/tools (like pacman, libarchive) that I have compiled (because I could not find them)... Thanks.

Just thought I would introduce myself and start on my 5 approved posts requirements. ETAPrime is the reason I found out about this project and it's something I'd like to help out with when/where I can. I currently have a few Raspberry Pi 3 B and 3 B+. I also have two Libre ROC-RK3399-PC that I'm looking forward to future support on with the community. I also enjoy gaming and 3D printing as my other hobbies. Ask me anything? I guess?

I'd really like to build a relationship with Armbian and Linaro... even a small one. Although most of the SBC manufactures we support aren't a member of Linaro... Armbian is a huge win for Arm as a whole, and impacts influencers who can choose to use ARM products in enterprise settings etc.

Is there any official way to report typos and broken links on www.armbian.com ? I see that link to H3 FAQ is broken: https://github.com/igorpecovnik/lib/blob/master/documentation/H3_mini_faq.md Should be: https://github.com/igorpecovnik/lib/blob/master/documentation/main-03-H3_mini_faq.md Don't know if this is known issue.

Hi Experts, I was using Armbian image (Armbian_5.24_Orangepizero_Debian_jessie_3.4.113.img) on orange pi zero without any issue for 3-4 weeks. I connected a speaker to LINEOUTL and suddenly my Armbian image became very unstable during boot it hangs at random places and some time crashes. May I know if Armbian Images on orange pi zero tested successfully (booting process) when LINEOUTL is connected to a speaker ?

Hi, my rpi 4 with 4GB ram is now on my desk but I cannot find armbian for it: looking at github build repo I do not see any file regarding raspberry pi in general. So... is anyone interested to help me to work on it? Is there an armbian interest in having a Raspberry PI build? Why historically I cannot see any sign of interested in those boards? Please... I know of all of their HW limitations... but they sell millions of boards each year... it is clear that some million people out there find them useful so we (as community) should to deliver an armbian build for this SBC. Any thought? Any starting point? *Ciao …

With Debian LTS, updates at least every week. Signatures don't work Stupid, childish pictures for idiots,called captchas are not shown security (!) checks can't be used. No administors can be reached because of github. Never. neve again answer this, I can't be reached in this forum. I can be reached by gleam@i2pmail.org being much more secure than all zhe securitythingies in this forum. Well, I do have a question armbianspecific: When will gnuit be made working for armbian? Oh and another one: Sinfo doesn't show the frequency of the CPU - to be made working. Why can't emails be sent to operators to be inserted in forum? Bye.

If you have time and a spare Allwinner H3-CPU system (like the Orange Pi One or PC (not PC2 because of H3 CPU) you could try the BASIC Engine NG for H3-PiComputers/Boards. The - bare metall - BASIC seems to have very powerful commands - see the Online-Manual A forum in BETA state is at this URL I downloaded and booted the SDCard-Image from the 14.10.2021 (compressed size 5.4MB) from this directory Image was written with Balena Etcher to the SDCard Have fun and write new BASIC-programms!

Purpose: Discuss displays that at least someone has tested and/or use, particularly touchscreens/strange resolutions/sizes/alternative technologies (DSI, parallel TFT, SPI, etc) Goal: Have some kind of "This at least worked with this version at that time" resource. Over and over people post things like "I have a Waveshare <XX.YY.ZZ> and Armbian can't do what the vendor kernel that uses a crap kernel full of security holes and crusty drivers can". So, point them here and say: "By the power of Google, I beseech thee, search!" And I have some random stuff lying around.

Selling a fully working Helios64 NAS from Kobol. It has been running continuously since purchase without any issues. Includes 4x Western Digital Red 4TB HDDs (16TB total), all in good health and used only in this setup. All original parts are included: case, power supply, cables, and accessories. Note: the 1GbE Ethernet fix has not been applied. Selling because I recently upgraded to a new NAS. Located in the Netherlands. Pickup possible or shipping within the EU. Contact me for pricing or questions.

Proposition for support consideration. Khadas VIM based Amlogic S905X and Khadas VIM 2 based Amlogic S912. Thanks

Is there a way to dual RK3399 on one board?

Hi, Anyone knows how to delete the account and my data here in the forum?

I am looking for more fundamental background information. How is the armbian project organized? Is there a repository with tracing system as i am used to on other projects like https://freetz.org/wiki/freetz?

Yesterday I did start to install armbian trixie iot on my Pinebook. Second part in debian - after the u-boot) starts, but then the Pinebook shuts off, because of a low battery(?) I did charge the whole day and powered off in the evening. Today the Pinebook stand on my table with a swollen battery. I removed it and happily it doesnt crash anything else than the battery holder. But now it doenst boot up complete like with a low battery. After the u-boot debian trixie does boot , but at the middle of the messages it does shutdown Can it run completly without battery? I have normally a 5V/2Ah power-supply connected and that did work the las…

Hello Everyone! I faced with some problems with csi driver on mainline kernel. The study of the Internet did not give any result. Probably someone already done the same things, and could answer on couple of my questions? My configuration: custom board based on A20 SoC (quite similar with Olimex Lime2), armbian-buster-desktop 20.05.0, Linux Kernel 5.4.41, and OV5640 CSI camera connected to CSI0 in parallel 8bit mode. My questions are: 1) Can anyone confirm that the sun4i_csi module in Mainline kernel works (with any CSI camera)? 2) Does the sun4i_csi module work with CSI1 port too? 3) If someone already run OV5640 via CSI on A20 SoC, what is the maximum fps can…

Hello guys and girls, I'm new around here, looking for a board to power my network storage needs. Up until now I've been running a 2TB USB3 Seagate Expansion connected to a ASUS AC68U router and things were just fine until free space started to be a problem. Recently I "inherited" a 2TB USB 2 Seagate Expansion which I was thinking of putting to good use. Some other 2.5" SATA HDD's might come my way in the future so I was thinking of taking a stone of the router and building a small NAS. The main usage will be SMB served sequential operations involving video files (daily) and occasional backups. The current numbers stay around 25-30 MB/s writ…

I would like to check the authenticity of the Bionic image I downloaded for my Cubieboard 1. However the downloaded .xz file only contains an .img file. The getting started page says all images should be signed. Are the .asc and .sha files typically missing in images for boards without official support?

hello and good evening Armbian-experts, Can I use GitHub as free unlimited cloud storage? well i guess no btw: I have found out the following: https://help.github.com/articles/what-is-my-disk-quota/ https://help.github.com/articles/about-storage-and-bandwidth-usage/ **conclusion:** well - i guess that the github folders are public unless to pay for service? **but wait:** What about Bitbucket: this seems to be a good idea - Bitbucket has free private repos. love to hear from you

See https://www.collabora.com/news-and-blog/news-and-events/rockchip-rk3588-upstream-support-progress-future-plans.html

First post here... apologies in advance for any questions that might sound dumb. My plan: buy Android TV boxes and install Armbian to run browsers and remote control using AnyDesk. I chose Android TV boxes - everything is complete and contained in a small box + very cheap. For £35 for example, I can get with power supply - with 2GB RAM - not sure about processor though. - Should I consider other options? Like Orange Pi? I've got a 3rd generation Raspberry Pi - that is so poor for speed, chokes on one or 2 browser tabs. (I haven't tried Armbian - I will be doing shortly.) - Need recommended hardware. Whether it's an…

I was searching for certain hard-to-find chip (TDA1022 BBD) and found this site ( www.chimicron.com ) mentioned as a source. They have it in stock and at a pretty decent price. Most of their stuff I’ve seen seems reasonably priced, but I couldn’t find mentions/opinions of the site here or in a few other diy communities. I’m not sure the location of the company (either Hong Kong or China?), but everything is listed in dollars (but then again so is Tayda). Has anyone purchase through this site? Any issues with quality of the productions such as questionable authenticity? Are shipping/handling times reasonable? Thank you!

Hi there , I’m Jimmy. First post here... apologies in advance for any questions that might sound dumb. My plan: buy Android TV boxes and install Armbian to run browsers and remote control using AnyDesk. I chose Android TV boxes - everything is complete and contained in a small box + very cheap. For £45 for example, I can get with power supply - with 2GB RAM - not sure about processor though. - Should I consider other options? Like Orange Pi? I've got a 3rd generation Raspberry Pi - that is so poor for speed, chokes on one or 2 browser tabs. (I haven't tried Armbian - I will be doing shortly.) - N…

I have an Orange Pi 800 64GB version for sale located in Denmark, Europe. If you fancy a hackable Orange Pi with support for a lot of Linux based distributions in a nice package with a lot of connection possibilities and a built in keyboard but don't want to pay EU import VAT this is your chance! If desired I can flash it for you with OS of choice. Condition: Like-new in box but with minor wear inside box (see images). This does not have any impact regarding transportation. Price idea: 100€ + shipping Ships to: All EU countries Payment method: PayPal If you have any questions please let me know. I'll attend FOSDEM '24 hence I can send it from Bru…

dear community, i am not sure which sbc- this udoo is: which version of udoo well i guess -that this is a Udoo Quad Makerboard Rev. D. question: can i connect this to a SATA Board !? Note i want to build up a NAS/ Samba server. can i do that with this UDoo quad found the following specs CPU NXP i.MX 6 ARM Cortex-A9 Quad core 1GHz GPU Vivante GC 2000 + Vivante GC 355 + Vivante GC 320 Integrated accelerators for 2D, OpenGL® ES2.0 3D and OpenVG™ Atmel SAM3X8E ARM Cortex-M3 CPU (same as Arduino Due) RAM DDR3 1GB 76 fully available GPIO: 62 digital + 14 digital/analog Arduino-compatible R3 1.0 pinout HDMI and LVD…

Hello there, This is my first post after just joining this discussion, so please forgive me and provide kind assistance if I have posted to the wrong subsection! As a new member in this forum and wish to share and gain some knowledge. I am looking forward to create my own discussion to resolve my query and gain some knowledge though I have taken part in various discussion which is definitely helped me a lot. Also in what category should be taken depends on what factors? Thankyou in advance.

Hi, I just joined armbian forum. I have debian 8 xfce img from orange pi zero h2, will it work on banana pi zero h2?

can we save the ram at a spot we like in armbian pi, like if im in a game, and than just when I restart the pi refill the ram with what it had so it can boot the game instantly?

Do any of you ever conformal coat your SBC's with clear nail polish or polyurethane to protect it from moisture to prevent corrosion? I usually coat the boards in my solar lights and they last MUCH longer...usually they die within a few months..the wires or components rusting thru. or silicon coating... like this https://www.amazon.com/MG-Chemicals-Silicone-Modified-Conformal/dp/B07BSK5S7B or acrylic coating...like this https://www.amazon.com/MG-Chemicals-Acrylic-Lacquer-Conformal/dp/B01HPS13SM I have found the nail polish seems to work well...others find it flakes off

Just as the title says, what would be a good recommendation for a mSATA to USB3 enclosure? I have seen these two that look interesting: https://www.amazon.de/Salcar-Aluminium-Festplattengehäuse-Datenkabel-Silber/dp/B01D9KX9UA https://www.amazon.de/ELUTENG-Externes-Festplatten-Enclosure-Datenkabel/dp/B06XCND4YT Any experience with them? Any other recommendation? @tkaiser any good/bad experience with this kind of enclosures?

Hello I am having a hard time trying to find some of the boards in Europe. Odroid and NanoPI are rather common, but Banana Pi, Orange Pi, Tritium, Olimex ... seem to be hard to find. Can anybody point me to a list of vendors, or maybe post them here (if it's OK with the forum rules)? Regards, Patrick

Hello, There is a software I ported to armhf (32bits), running very well on a Raspberry Pi3 (probably Pi 2 will do it) and I'd like to know where I could post to obtain feedback for other arm machines ? I can provide it under .deb form, or as pre-installed in a .tar.gz or whatever on demand Thanks in advance for redirecting me if I'm on the wrong place. -- ericb

Hi all, I am building an art project, and I love the hardware specs of Orange Pi PC for it. I have a graphical Java app (built in Processing) that runs on a HDMI display, and unsurprisingly it doesn't run well without a GPU. On RPi 3B+/Diet Pi I've got it up around 24 fps using KMS, and I'm happy with that performance, but now I'm porting it to the OPi so I'm kinda starting from scratch again. I am aware of the amazing work going on with Panfrost although I've had issues installing it on my board with Buster Desktop. In general Armbian on Orange Pi PC seems pretty great, amazing even. But I'm only getting about 1 frame every 5 seconds with my Java/Processing a…

Is it possible to perfrom CSI data extraction using nexmon tool happens in the following phones with the respective firmware patches given below and how? Samsung Galaxy S22 Plus - 20_82_42_sta (r994653) Google Pixel 7 and 7 Pro - 20_101_36_2 (r994653) and 20_101_57 (r1035009) Google Pixel 8 - 24_671_6_9 (r1031525)

Hello, can someone tell me: I launched the mpd stream via httpd, the mpc client, when connected from another device there is neither the name of the station, nor the name of the song, nothing, only the start-stop button and volume control. Who can tell what the problem is? I enclose the configuration file mpd.conf: Spoiler music_directory "/home/piro_tex/mnt_microsd" playlist_directory "/home/piro_tex/mpd/playlists" db_file "/home/piro_tex/mpd/tag_cache" log_file "/home/piro_tex/mpd/mpd.log" pid_file "/home/piro_tex/mpd/pid" state_file "/home/piro_tex/mpd/state" …

Which Device should i go for ? My use case :- 1. 24x7 Torrent Downloader. 2. Jackett , Sonarr & Radarr. 3. Use is as headless server. 4. Plex - Stream on Fire 4K. 5. Must provide max Samba speed with windows around 90 Mb transfer rate. 6. Must Support Direct Play 4K HDR , I'm not too fussy about audio and can switch to AAC if there is any transcoding. But would like to know whether it can play TrueHD. 7. I already have C2 which i use for same purpose but it clearly goes into transcoding whenever i play any 4K HDR movie which is more than 25 Mb Bit rate. 8. Should be easily available in my country India The options I could think …

Hi, I've just got my fantastic XU4, and worked out that Armbian is amazing on it, thanks to everyone that put all this work in it's amazing So powerful is this little bad boy that I've started researching replacing my Windows Desktop but I need two 1440p monitors because of my eye problems. Anyway I've been looking at using USB3 Displaylink adaptors for this, am I barking up the wrong tree here? It looks like on paper the "qgeem usb3 "M7VC01" on Armbian" should do the trick, does anyone have two of these working? or even one? Cheers TIA Rich

Hi , When i was know have the new test image Armbian 5.24 desktop image (beta) support HDMI and DVI , but i can't know how to setting about vga form /boot/armbianEnv.txt could you help me how to edit this file ? my resolution is 1024x768 Thank ! https://github.com/igorpecovnik/lib.docs/blob/master/docs/board_details/pine64.md

I have a supported build host running, and successfully building and testing kernels for a few targets that I have examples of. I'm looking to extend my repertoire to building complete armbian images. I think I also want to use EXTERNAL and/or EXTERNAL_NEW to configure additional packages into the image. This has led me to this stanza: BUILD_MINIMAL (yes|no): set to “yes” to build bare CLI image suitable for application deployment. This option is not compatible with BUILD_DESKTOP=”yes” and BUILD_EXTERNAL=”yes” I can find no BUILD_EXTERNAL referenced elsewhere, should this be simply EXTERNAL ? or have I missed so…

Hi again, For a dedicated digital audio system (squeezebox) I would like to set up my Pine64 board with a preemptible kernel. I have been trying to use the procedure from https://docs.armbian.com/Developer-Guide_Build-Preparation/ to build a patched 3.10.104 kernel using the RT patch from: https://www.kernel.org/pub/linux/kernel/projects/rt/3.10/ patch-3.10.104-rt117 patch set The patches are applied successfully by the script, but break a number of things so the kernel doesn't compile. A number of the problems are linked to ip tunnelling, which I simply removed from the config as my system won't need them, but now I'm hitting: MO…

Hi, I am very keen on installing motioneye on my orangepi zero. followed your instructions but getting : root@orangepizero:~# apt-get install python-pip python-dev curl libssl-dev libcurl4-openssl-dev libjpeg-dev libx264-142 libavcodec56 libavformat56 libmysqlclient18 libswscale3 libpq5 Reading package lists... Done Building dependency tree Reading state information... Done Package libmysqlclient18 is not available, but is referred to by another package. This may mean that the package is missing, has been obsoleted, or is only available from another source E: Unable to locate package libx264-142 E: Unable to locate package libavcodec56 E: Unable to locate package l…

Hi guys. Ive seen this forum from time to time in search results. And now i finally registered to ask a question. Im looking for very cheap (under 80$), extreemely powersavvy pc with AES support. This machine will work in my home 24/7 as OpenVPN server only (no other stuff). I pay the bills myself so energy is my main concern. I already own 3 pc's , 2 monitors, 2 smartphones, and 3 network devices and this time this new machine needs to be almost unnoticable in my energy bills. At first I was thinking about Raspberry Pi 3 or RPi 3 + but i found that its bottleneck is gigabit NIC which is poorly implemented. In the other hand AFAIK ODROID C2 has si…

I have nano pi neo (no air) Linux FriendlyARM 3.4.39-h3 #24 SMP PREEMPT Sat Feb 4 15:23:58 CST 2017 armv7l armv7l armv7l GNU/Linux fa@FriendlyARM:~$ lsmod Module Size Used by sunxi_spdma 3311 0 sunxi_spdif 6615 0 sunxi_sndspdif 3580 0 sndspdif 2619 0 snd_usb_audio 74879 2 snd_usbmidi_lib 15971 1 snd_usb_audio snd_hwdep 4841 1 snd_usb_audio I tried sound from board, and no successs, then I plugged in usb audio . Same thing no sound. Here are couple of shell commands I used and their output. dmesg | grep audio […

What's your choice and why, tips and tricks. I'm using Geany , simple but it does have some problem with multiple files. I also downloaded code blocks but could not set the flags right (-lwiringPi) and left it for now as it is. To lazy to investigate

Hello! I ordered RTL8188E usb wifi dongle and could not get it to work. I already try few methods that google throw at me. So far without success. Can someone point me to step by step instructions that would help me? I am using USB wifi RTL8188E dongle + OrangePi One /w Armbian. lsusb shows "0179 Realtek coorportation" ifconfig do shows only eth0 and no wifi. Can someone explain me, what I need to do, to use wifi with this wonderful arm PC? P.S. I am not very good at Debian or any other linux distro.

Total Armbian newbie here. Previous Dietpi user looking to acquire an Odroid N2+ for primarily serving music (Plex, Logitech Music Server perhaps). Wondering about the availability of support for routing audio through to USB DAC? In DietPi this was handled through alsamixer. How is it handled if at all with Armbian?

I am using apt proxy on opi pc 20.11.1 buster. Te proxy was working fine but now it gives error for apt.armbian.com only, not for debian repos. Err:2 http://apt.armbian.com buster InRelease 500 INTERNAL SERVER ERROR [IP: 192.168.10.1 8080] Any hint? Edit: https works

hello dear experts i am on the search for a X2go solution for RASPI i have had a quick lookup here at http://wiki.x2go.org/doku.php/wiki:repositories:debian and https://wiki.x2go.org/doku.php/wiki:development:build-server well i am not very sure if i can run the x2goserver packages on a ARM Guess that they are only available for intel platforms. No ARM packages. I don't know if it's possible to build your own. Does anybody know some more - do the X2Go rund very slow on arm cf: https://wiki.x2go.org/doku.php/wiki:development:build-server

Need a little help. What board do you guys recommend for multi-room audio? What a need: - Something small like OPI zero or a bit bigger (that's the space i have inside the wall) - I2S for connecting a DAC - Onboard WiFi - Maybe a Micro and onboad flash I have an OPI Zero but it has no I2S The only ones that i know are C.H.I.P and and nanopi Air

I am using STM32F103CBT7 for my design with HAL functions at a 72MHz system clock. SPI 1 is configurated as Master, 16-bit data width at 18 MBits/s. When sending data out, there is a data bit on the MOSI pin, but there is no Clock pulse on the SCK pin. I can't figure out what is wrong. Any suggestion?

Hello, I'm using Armbian (kernel version 5.0.21-sunxi) on an Olimex a13 SOM. I'm trying to implement wiegand interface on GPIO pins, that means that I have to fire interrupts on 50uS pulses. I solved my problem with writing down a driver capturing edge triggered inputs. So, with some readers (200uS pulses, 1.5ms between pulses) i can get all data, but with other readers (e.g. 100uS pulse, 500uS between pulses) I miss some interrupts (e.g. I have a wiegand42 reader and sometimes I get 41 interrupts, sometimes I get 39 or 36). I read that kernel fires new interrupt only when the previous interrupt function has returned, so I tested it with just addi…

i know you guys cant support every board thats outthere and it has been a wonderful ride with my cubieboard, few hickups in general armbian was the only reason i didnt bin that board when i got it just a little bit sad so see it go from supported devices but still i get it. its time to move on for newer and better boards. and with that said do you guys and a good suggestion for a replacement board that has a sata connection etc and thats gonna have a good timeline for support by Armbian ?

Please tell me how to install IMX462 MIPI CAMERA so that it is recognized by NAS SDK 3588. Since I am a beginner, I cannot configure DTS or create a driver. I need help. Linux ARM Kernel Architecture - Patchwork I think there is a patch related to imx462 here, but I don't know how to use it. Please tell me how to use it.

Hi, I am currently facing lots of problem in Flashing ".raw" image with Etcher on windows 10. On starting the application, firstly it lags for few seconds but when I start the flashing procedure by clicking Flash button, after that it only show starting flashing and it eats up my remaining whole 3 GB of ram also if creates a lot of services and threads of the process , After that it never completed successfully.

Dear all: i am new at the forum and want to ask where can I download a ready to use .img with any version of Debian for my old A13 tablet in its standard Q88 design. Thanks a million in advance. nelson.

Hello Everyone, I'm currently doing an assignment for one of my classes, and in it, I have to give examples, using Java syntax, of *static* and *dynamic binding*. I am lost while understanding the work process. I understand the basic concept, that static binding happens at compile time and dynamic binding happens at runtime, but I can't figure out how they actually work specifically. I found an example of static binding online that gives this example and running the program on interviewbit. public static void callEat(Animal animal) { System.out.println("Animal is eating"); } public static void callEat(Dog dog) { System.out.println("Dog is eating")…

dear community i am so glad to be here on this great forum - this is a great place. i have installed Armbian on a. banana pi b. orange-pi and futhermore i will try to install it on Udoo Quad at the moment i am workin on a new plan: i am planning a Wi-Fi controlled rc-car using Arduino UNO, ESP8266 Websockets or UDP the question that arises here. how would you decide? i want to create an Arduino project about a Wi-Fi controlled (ESP8266) RC car using. - with a tight budget you can’t really buy everything you need at once. what is needed: An Arduino UNO An ESP8266 An L298N motor driv…

Hello all, I'm relying quite heavily on RSS for my news feed. However I can only see two feeds on the armbian forum: New threads and posts. As you can imagine, I get quite a lot of pings for the post feed, and I'm not able to follow previous threads from the New threads feed. Is there more feeds or is it possible to add a feed per thread to the forum?

Hi guys. I have the Orange pi zero and the usb expansion board but i still want a couple more usb ports. Can i solder leads directly to the pi or am i better off using a powered usb hub?

Newbie Using LinuxMint 21.3 I have been searching for answer to below question, and have been referred to UserSpace as it may have an answer. Referral from greg kh on Linusfoundation org. Question: Linux Mint 21.3 Using LibreCalc With USB RFID tag readers, (2 or more reader) most enter direct into open focus spreadsheet. However with no device number. Have same pid and vid. As the read from USB tag goes to the spreadsheet, can the device number eg 03 and the bus number eg 004 (either or both) be appended to the data read, into the spreadsheet. This would enable spreadsheet identify each reader and its location, to manipulate the tag …

Igor (or other admins), My account (Charles Morton/Chuck the Duck) seems to be stuck in validating and wont let me post or message. Can you please help unlock it.

Just updated to v5.73 and no handshakes are reported from wireguard though the connections are up and running. Does anyone else experiences the same issue? root@cubietruck:~# systemctl status wg-quick@wg0 ● wg-quick@wg0.service - WireGuard via wg-quick(8) for wg0 Loaded: loaded (/lib/systemd/system/wg-quick@.service; enabled; vendor preset: enabled) Active: active (exited) since Wed 2019-01-30 00:34:12 EET; 1h 34min ago Docs: man:wg-quick(8) man:wg(8) https://www.wireguard.com/ https://www.wireguard.com/quickstart/ https://git.zx2c4.com/WireGuard/about/src/tools/man/wg-quick.8 https://git.zx…

I have Cubieboard plus (Cubieboard 5) . But there is not available any workig links of latest Armbian based on Ubuntu 18.04 with Kernel 5.x Can anybody point to such links or can anybody build such image for the device ? I am newbie in image building. At the time I use Armbian_5.51_Cubietruckplus_Ubuntu_bionic_next_4.17.4 what I could find but onboard Wi-fi is disabled and I can not still enable it. It work well in Android.

I bought a Clearfog Base shortly after they came out and have been running Armbian on it since early on as my home router. In general this is a solid SBC for a home router and light weight server. 2 x gigabit copper NICs, and an SFP cage - nothing dangling off USB here m.2 SATA storage - about the best support for performant storage of any SBC I know of; m.2 SATA leaves eMMC and SD in the dust. It's not NVMe, but for this little box, it's great. 1GB of memory - this is enough to run a few containers for light weight services like caching DNS and DHCP USB console - rather than exposing a UART on a few GPIO pins, this includes an authentic FTDI chi…

Hi Igor, First of all thanks a lot for all the work that you do, its awesome. I do experience some problems with the latest kernel version 3.4.110 that I compiled with PMP support with the RTL8211E PHY interface. Its something weird going on. I can ping the card but i get multiple interruptions: PING 10.20.104.243 (10.20.104.243) 56(84) bytes of data. 64 bytes from 10.20.104.243: icmp_seq=1 ttl=61 time=0.362 ms x 64 bytes from 10.20.104.243: icmp_seq=3 ttl=61 time=0.300 ms 64 bytes from 10.20.104.243: icmp_seq=4 ttl=61 time=0.276 ms x x x 64 bytes from 10.20.104.243: icmp_seq=7 ttl=61 time=0.246 …