Allwinner sunxi

How to run a python script at startup on orange pi zero? Thx!

My Cubie crashed after 3-4 weeks and I installed Watchdog using the file change method. During my tests it works fine several times. But again after 3-4 weeks my Cubie was totally unavailable via SSH & console. Title: Armbian 4.81 Cubietruck Debian jessie dev (unofficial) Kernel: Linux 2016.01-rc3 Build date: 28.12.2015 Filesystem Size Used Avail Use% Mounted on /dev/root 917G 4.3G 867G 1% / devtmpfs 944M 0 944M 0% /dev tmpfs 944M 0 944M 0% /dev/shm tmpfs 944M 17M 927M 2% /run tmpfs 5.0M 4.0K 5.0M 1% /run/lock tmpfs 944M 0 944M 0%…

Hi there, when I run command "sudo shutdown -r now" (or sudo reboot) my orange pi shuts down instead of reboot. Why this happens and how to correct it please? Thank you. My armbian: Linux orangepilite 3.4.113-sun8i #10 SMP PREEMPT Tue Jan 24 02:57:18 CET 2017 armv7l GNU/Linux

Hello, I have a cubieboard 2 (the one with only one SD slot) and there is a version of Linaro that is bootable in the NAND memory. I created a card with Debian Jessie Server (the last one) and boot it successfully, but when I run nand-sata-install I get a "No targets available. Please check your drives" pop up. I tried downloading the Debian Wheezy and creating a card and on that one I can see the nand memory blocks, but don't have the script to install and the one that came by default only installs to SATA (not to NAND). Anything I may be doing wrong here??

Hello, I try to re-install my olimex lime 1, but I'm unable to boot from the current buster image. For now, here's what I do to flash the sd card: % wget -c "https://dl.armbian.com/lime/Buster_current" % mv Buster_current Armbian_20.02.1_Lime_buster_current_5.4.20.7z % 7z x Armbian_20.02.1_Lime_buster_current_5.4.20.7z % sudo sh -c "dd if=Armbian_20.02.1_Lime_buster_current_5.4.20.img of=/dev/sdc bs=1M" And I come up with a result like this: % sudo sfdisk -d /dev/sdc label: dos label-id: 0xd9b237ef device: /dev/sdc unit: sectors /dev/sdc1 : start= 8192, size= 2318336, type=83 Is this empty space before the first par…

Hey, I recently decided to give the 22.11 a try on my M1, but I can't get my sata SSD to be the system root and boot again. 18.04 it worked for me with the exact same setup. I used this: https://docs.armbian.com/User-Guide_Getting-Started/#how-to-install-to-emmc-nand-sata-nvme-usb went with armbian-install only option for me was boot from SD and system on sata. But after the preparation of the ssd, the reboot always runs into emergency mode with not really good hints how to solve, or what even the issue is. Any tips or hints are welcomed.

Hi there, I am new to OrangePi and Linux as well and that's probably why I have faced my first problem I could not find an answer on web. I use OP Lite with the latest debian jessie. And there is the problem (or just a bug): after some time of using WiFi (and wwan) I wanted to disable it in order to reduce "excessive" power consumption. So firstly I had disabled it via "nmcli" and after a while I found out about "h3consumption" command. But recently I wanted to install (and download) but none of the above commands were able to re-enable them. Any ideas how to re-enable (besides loading new OS image) ? In addition, I noted that changind "h3consumption" is not a…

Hi Armbians, I'm running two identical Cubietrucks with Armbian Jessie systems in headless (very lean) mode without any X-Windows or the like. Both boot from 16GB SD-Cards. Now one of them, which had encountered a number of power failures, suddenly ran out of space on the SD-Card (100% usage of / ), while the other CT only shows 22%. I ran across this phenomenon, when the system failed to carry out an apt-get update at one point and important services Samba were no longer started. I then searched the root filesystem for culprits but there was nothing suspicious ... So I thought there might be a partial "destruction" of the fil…

____ _ _ _ _ / ___| _| |__ (_) ___| |_ _ __ _ _ ___| | __ | | | | | | '_ \| |/ _ \ __| '__| | | |/ __| |/ / | |__| |_| | |_) | | __/ |_| | | |_| | (__| < \____\__,_|_.__/|_|\___|\__|_| \__,_|\___|_|\_\ Welcome to ARMBIAN 5.27 stable Debian GNU/Linux 8 (jessie) 3.4.113-sun7i System load: 0.92 Up time: 1 min Memory usage: 4 % of 984Mb IP: 192.168.1.77 CPU temp: 34°C Usage of /: 15% of 7.2G How can I change this logo?

Don't quite know what to expect here. The download page implies that there should be a gadget serial connection but there is nothing. I don't even see the USB DRC getting registered. Is this a known issue and is there a solution? TAIA. # nanopineo:~$ uname -a Linux nanopineo 4.11.3-sun8i #3 SMP Wed Jun 7 13:28:34 CEST 2017 armv7l armv7l armv7l GNU/Linux # nanopineo:~$ lsusb -t /: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=ohci-platform/1p, 12M /: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci-platform/1p, 480M # nanopineo:~$ lsmod Module Size Used by evdev 20480 1 brcmfmac 172032 0 brcmutil …

Hi, I have been messing around with an Orange Pi One Board for a day or 2 now. So far the only distro that works has been yours. But I have the weirdest thing when I apply an update. Excuting apt-get update actually causes the machine to lose power completly. I have been looking at more data this is what I have. After and before the crash. Last freeze with htop analyzing. Am I missing something? I don't see a good reason for this to happen. Is there a common method to fix this if it is a known issue?

I have a problem with my Opi z+, it is assumed that its maximum frequency is 1200 Mhz, but it does not rise from 816 Mhz. I use a Raspberry charger, of 3000 mha. I changed the governor to performance but it does not go up to 816 Mhz. I use Armbian, based on ubuntu 18.04

I'm trying to figure out what happened in my device this morning. the process that i'm monitoring was interrupted and restarted and i'm want to know that reason, is it internal code reasone or system failure that caused to my process to crash. i'm attaching the /var/log/message piece of logs when my process crashed. can you tell me what happened? I'm using NanoPi2 NEO with latest armbian version for this specific board, Thanks alot Spoiler Feb 1 05:16:13 nanopi NetworkManager[642]: <info> [1548990973.1753] dhcp4 (eth0): address 10.0.0.5 Feb 1 05:16:13 nanopi NetworkManager[642]: <info> [1548990973.1822] dhcp4 (eth…

Greetings. Please help with accessing GPIO's UART1 and UART3. Currently installed nightly build: root@orangepiprime:~/sunxi-DT-overlays/sun50i-h5# cat /etc/armbian-release # PLEASE DO NOT EDIT THIS FILE BOARD=orangepiprime BOARD_NAME="Orange Pi Prime" BOARDFAMILY=sun50iw2 VERSION=5.46.180607 LINUXFAMILY=sunxi64 BRANCH=next ARCH=arm64 IMAGE_TYPE=nightly BOARD_TYPE=conf INITRD_ARCH=arm64 KERNEL_IMAGE_TYPE=Image Added DT overlays for all GPIO uarts: root@orangepiprime:/boot# cat armbianEnv.txt verbosity=1 console=both overlay_prefix=sun50i-h5 rootdev=UUID=666e2e1a-80be-4261-9e66-4cd8a4b14679 rootfstype=ext…

Hi , I'm an beginner.I have M2+ and want to access GPIO by Python. Please suggest me that how to do that. thank you.

Hi, I've been running armbian (Debian Jessie) on my Cubietruck successfully for a while now, its mainly just an mpd server. It runs as a headless server and I use the optical spdif connection, ethernet (although I used to use the wireless). I have my root partition on a 2.5" hdd. I currently have: linux-image-3.4.106-cubieboard linux-headers-3.4.106-cubieboard linux-firmware-image-3.4.106-cubieboard I've seen the page http://www.armbian.com/kernel/ and added the repository as instructed. I really just want to confirm if you think I'll run into any trouble with spdif and ethernet if I upgrade to mainline kernel. My understanding is that I …

Hi I only have an old monitor, and I thus need to use a HDMI-to-VGA-converter to work with my Orange Pi PC Plus. When powering the Orange Pi on, the green LED on the board is constantly ligthened. On the monitor, I get a black screen, after 4 s (or so) a totally red screen. No text. No graphics. Then after about 15 s, on the board the red LED starts to double blink. The red screen remains for ever. I have tested the Raspbian and Debian images available on http://www.orangepi.org/downloadresources/. They work fine with the converter. Alas, the preferred OS, "Orange OS" armbian, seems not to work. Board: Orange Pi …

Hello, I want to use Armbian on a Cubietruck with an Onyx Boox Max 2 ebook reader (HDMI port) as display. I tested Armbian Stretch mainline kernel 4.14.y and Armbian Xenial desktop legacy kernel 3.4.y. But with both systems I get a black screen. I use the serial console to access the cubietruck. When I plug in the HDMI cable I get following info on Armbian Xenial desktop legacy kernel 3.4.y: <6>EDID version: 1.3 <6>PCLK=125000000 X 2104 2244 2284 2384 Y 1560 1565 1570 1590 fr 32 NP <6>Using above mode as preferred EDID mode <6>PCLK=125000000 X 2104 2244 2284 2384 Y 1560 1565 1570 1590 fr 32 NP <4>Unimplemented SV…

Hello dear commnuity have installed armbian banana pi m2 kernel 4.19 on a BPI How to get the graphical configuration screen!?

Dear all as title, the orange pi r1 can use to bridge mode ? and how to do ? like this

Is it possible to boot from harddisk (ssd) without the need of the sd-card. I am using an A20-OLinuXino-MICRO from OLIMEX. After flashing sd wih image and setting up boot from sata or usb by the use of armbian-config sd card is still needed. Would the A20 recognize u-boot (bootloader) on diffrent device than sd-card?

Hello, I'm starting in this world with an Orange Pi Lite, but I'm not being able to perform the initial setup using serial console gadget on the OTG port. To prevent power problems, I'm using the DC input. Unfortunately I haven't found enough information to make the configuration on a Linux PC, since I wasn't able to know the /dev address to connect through screen. You've probably noticed that my knowledge of Linux is rather scarce. Thanks in advance!

I've installed a bootable Armbian Ubuntu on an SD card. I plan to copy the SD's OS into multiple OPI PC+ devices. The problem I found was that somehow the HDMI monitor displays a different max resolution depending on which OPI device I'm using. The armbianEnv.txt for the SD card: verbosity=1 logo=disabled console=both #disp_mode=1920x1080p60 disp_mode=1280x720p60 overlay_prefix=sun8i-h3 rootdev=UUID=8bc771e4-1c8a-4bd0-af02-00570c63c5c9 rootfstype=ext4 overlays=uart1 uart2 uart3 extraargs=drm_kms_helper.edid_firmware=edid/1280x720.bin usbstoragequirks=0x2537:0x1066:u,0x2537:0x1068:u When I boot the SD card on the OPIPC+ displaying the correct max resolu…

Hello everyone, First of all, sorry for my poor English. Quick description of my problem: I need to install OMV on Orange Pi Plus 2E's EMMC. At the beginning I used the image of the following URL： http://simplenas.com/download/other/orange-plus But it is clear that this image is prepared for Orange pi plus，I successfully installed this image to Orange Pi Plus 2E and successfully run on the TF card, but when I cloned image to the EMMC , it can not start. then i used the armbian image of the following URL： https://www.armbian.com/orange-pi-plus-2e/ i install OMV by apt-get,but webui failed to start after Reboot. a…

Hello there, I just flashed latest armbian (downloaded yesterday) on my A20 Olinuxino Micro. Version was with legacy kernel as my use case involves multimedia. SD card is Samsung Evo 128GB. Once I attach HDMI display, I can see armbian logo and something happening (booting kernel etc) just for a few seconds, then screen flashes with colors and I don't get anymore signal. I tried with two monitors with the same reult. Later today I will try using cable-f attached to pins to see wether something is happening under the hood (I expect yes). In the meantime can someone confirm this issue? What should I try in order to fix this? Thanks in advance fo…

Dear all, After having problems with the 5.04 armbian and kernel 4.4.3 I went ober to build my own image. Prepared an ubuntu 14.04 and built jessie image, xenial image, with the 3.x and 4.x kernel. After its not working I tried an ubuntu 16.04 system and built again all images. No single image will boot... No errors while the build process (default settings). Please find the boot messages in the image file here: https://www.dropbox.com/s/2kpddhdkh5czw91/image1.JPG?dl=0 Any idea, what the problem could be? Thanks, bb

I am new to Armbian and I have been using Jessie on BPI M2 for a couple weeks now but I can't seem to get it to automatically boot into desktop mode when no monitor is connected. It always seems to go right into command line. I have a number of pieces of software that have a GUI and need to run under desktop mode right off the bat that I would like to have at startup. I have been doing a lot of searching and have been wondering if it is a frambuffer issue. Any suggestions would be appreciated.

How to start a sound&microphone on the Orange Pi Zero 2+ H3? root@orangepizeroplus2:/# aplay -l aplay: device_list:268: no soundcards found... root@orangepizeroplus2:~# uname -a Linux orangepizeroplus2 4.11.5-sun8i #3 SMP Thu Aug 3 08:36:37 CEST 2017 armv7l armv7l armv7l GNU/Linux root@orangepizeroplus2:~# lsmod Module Size Used by can_raw 16384 1 bluetooth 270336 0 qmi_wwan 24576 0 qcserial 16384 2 usb_wwan 16384 1 qcserial sun8i_codec_analog 24576 0 snd_soc_core 122880 1 sun8i_codec_analog snd_pcm_dmaengine 16384 1 snd_soc_core usbserial …

I'm trying to wake up an OPi PC using an IR remote following these instructions http://www.orangepi.org/orangepibbsen/forum.php?mod=viewthread&tid=2048&extra=page%3D1 bits 16 flags SPACE_ENC|CONST_LENGTH eps 30 aeps 100 header 9004 4560 one 532 1703 zero 532 593 ptrail 541 repeat 9015 2283 pre_data_bits 16 pre_data 0x1CE3 gap 139912 toggle_bit_mask 0x0 begin codes KEY_POWER 0x48B7 KEY_0 0x00FF KEY_5 0xA05F end codes end remote . [s_cir0] ir_used =…

Hello, When I flash the newest version of Armbian debian, and plug it into my Orange Pi Lite, nothing is displayed on my monitor, even if the led is green. My monitor is 4K LG display. With Debian, the HDMI output is not reconized. I tried with Armbian Ubuntu, and the instalation guide is displayed, but the edge and the bottom of the screen are cut. After one reboot, the screen is entirely black and I can't do nothing. Any help is welcome

Hello, My OPi PC runs headless as a web and file server, I don-t need sound, gpu, video/hdmi, IR, microphone... only Ethernet and USB. Are these things that can be shut down to save power and perhaps memory too? How? Thanks,

I have spent hours trying to get any activity on my new Orange Pi PC I just purchased. I have been downloading and burning different images, reformatting / trying different SD cards, 2 power supplies, using DD, WIn32DiskImager, Rufus, scanning my SD using F3, etc lots of "pain". The solution - which I found somewhere halfway by accident - is that some boards do not have card slots mounted correctly, but you can flex the card to make it work. So yes, I flexed the SD card and applied power, and like magic I got actual LED activity. OMG it boots now! Would have worked the entire time but it did not make contact with the SD card. My solution for now is to stick a laye…

The Orange Pi Zero Plus has only a CVBS/FBAS/RCA video output, therefore I believe that only a televison but no VGA or DVI/HDMI monitor can be used (or headless use). Has anybody an idea how to convert CVBS to VGA or DVI/HDMI? L.

Hello everyone, Would like to ask for some guidance regarding how to install armbian on a t507 processor. as written here in this post allwinner 507 processor it says For this reason I have tried to burn an image for orangepi zero 2 but it doesn't boot, it just get frozen and I can't get any logs because the serial console do not prints anything all black. Does someone could maybe have some suggestion of what I could try? anything is more than welcome. Thank you in advance

Good day! I'm using latest armbian build for orange pi lite (Armbian_community 25.2.0-trunk.86 Bookworm). Tried to connect anything to OTG USB port (mouse, flash drive), but it didn't work. DMesg was silent. Had 4 USB devices: [ 1.683435] usb usb1: Product: EHCI Host Controller [ 1.699369] usb usb2: Product: EHCI Host Controller [ 1.727339] usb usb4: Product: Generic Platform OHCI controller [ 1.729832] usb usb3: Product: Generic Platform OHCI controller Then I followed this guide https://github.com/carl1961/Orange-PI-Lite-Usb-OTG-to-Host And I had 5th one after this: […

Hi guys, I have been following this two sources below while trying to build my own pps ntp server with orangepi plus. I have got gpsd and pps work. However, I have ran into the problem that the chrony I got from apt-get doesn't have pps support. It will outputs "Fatal erre : refclock driver PPS is not compiled in". I have tried building chrony from source with timepps.h but that couldn't even run properly without pps source. I am stuck with the problem. I would appreciate any advice. Thanks! 1. 2. https://www.blackmagicboxes.com/?p=581

Hello. I want to test wireguard with the bionic nightlies on my OrangePi Plus 2e, but I'm unable to install the correct linux headers. In armbian-config, it show the "loading kernel modules" and the installing screen 2 times for a second, then goes back to the main screen. If I want to install with "sudo apt install linux-headers, it shows these possible options: linux-headers-udoo 5.52.180715 linux-headers-sun8i 5.52.180715 linux-headers-sun7i 5.52.180715 linux-headers-rockchip 5.50.180630 linux-headers-odroidxu4 5.52.180715 linux-headers-odroidc1 5.52.180715 linux-headers-next-udoo 5.52.180715 linux-headers-mvebu 5.52.1…

Following the suggestion that if I didn't like the documentation, I should write it myself, here is my version of what I was hoping for, (how to get started) instead of the formal definition style of a reference manual. Please feel free to correct the errors and use it how you wish. How to set up OS for development boards General This tutorial should apply to any board supported by Armbian, it uses the example of Orange Pi Prime. 0. Introduction The Prime's hardware is good, but can only work properly if the OS has all the drivers for the chips used on the board and only a few OS versions have them right. The most common fau…

Out of curiosity, and according to several articles/posts including this one http://forum.lemaker.org/thread-1847-1-1.html the A20 has support for hardware watchdogs. Has some successfully configured and used the watchdog kernel module sunxi_wdt.ko in a banana / lamobo R1?

Hi, I just saw that my syslog is growing very fast, so i checked it. It's getting spammed with this message every 5 seconds: Mar 11 14:02:46 localhost kernel: [157574.980133] sunxi_i2c_do_xfer()978 - [i2c0] xfer timeout (dev addr:0x48) It's a fresh installation of armbian 5.38 (ubuntu 16.04) on my orange pi pc h3, i just installed snmp and nginx, jdownloader (java) and tightvncserver. Is there any way to stop this? what do i need i2c xfer?

I use OrangePi R1 with connected RS485-TTL module to UART1 (PG6, PG7). RS485 communicates with a heatpump. Heatpump transmits data to RS485 module and I read and decode the data with a program and make some ACK replies. Everything worked fine for a month till OrangePi Power Adapter died. I have replaced Power Adapter and my program now stopped working. I have already spent couple days debugging. Replaced the cable from the heatpump to RS485-TTL module. Tried to see what is happening on the RS485 line with oscilloscope. Start of the diagram always looks good, but the end is skewed and corrupt. It seems like RS485 tries to send data while it receives and ce…

Hello all, i 've followed the steps from "sudo armbian-config" to create a hotspot. The hotspot is well created but doesn't start on next boot. I have to go back to armbian-config/manage hotspot to start it.. How can i do to get the hotspot autostart? With best regards Thanks Pierre Orangepi+2e with armbian 5.38 Ubuntu desktop

https://components101.com/sites/default/files/component_pin/Beaglebone-Black-Pinout.png I could not find a picture numbering the pins on an orange pi one. Up right pin by the arrow is pin1, pin below pin1 is pin2 and pin left to pin1 is pin3. http://www.orangepi.org/images/orangepione_info.jpg I want to use an orange pi one to install libreboot on a thinkpad t400's flashchip. Which of the following pins on the beaglebone black's p9 corresponds to which pins on the orange pi one? beaglebone black pin 17 -> ? 18 -> ? 21 -> ? 22 -> ? gnd -> ? 3.3v -> ? H…

I'm on an Orange PI PC running Armbian_23.08.0-trunk_Orangepipc_bullseye_edge_6.5.1_minimal I've enabled analog audio out the 3.5mm jack using overlays=analog-codec in /boot/armbianEnv.txt I'm connecting the analog 3.5mm jack to a 3watt amp & speakers. It works mostly, but I only get audio on the left channel. Alsa mixer Line Out only allows one channel to be unmuted at a time - left channel or right channel. Left channel sounds pretty good (DAC reversed appears to increase dynamic output). Right channel is very low volume and appears to be "squelched" - is the audio signal reversed from ground or something? Anyway, is there some …

How can I change to a ramdisk in Cubietruck? I have seen in boot folder that are a uinitrd file. How can I start from it? Default is zIimage, right? Leonardo

I have Armbian 22.02 Bullseye installed on my Orange Pi zero. The wifi connection worked fine at first, but after a few reboots the device 'wlan0' seems to no longer exist. In the Armbian-config settings the entry wifi is no longer present and also in ifconfig wlan0 is no longer displayed. I have now reflushed the system 3 times and always have the same problem.

After setting up my static IP address, I can't SSH or Ping to the board anymore. The board shows up on my router list of connected devices, and the Pi Hole works normally. I flashed a new SD card and went step by step to see what was causing the problem. I resize the filesystem, update and upgrade the system, then I set up the static IP, so this happens. I tried both by /etc/netwkork/interfaces and by nmtui. This is what my /etc/network/interfaces file looks like: auto lo iface lo inet loopback iface eth0 inet static address 192.168.25.160 netmask 255.255.255.0 gateway 192.168.25.1

Hello! In order to compile software on my Banana Pi running Armbian 5.27 Debian 8, I started off uncommenting the "# deb-src" lines in /etc/apt/sources.list and then ran apt-get update and apt-get upgrade. The start screen in the shell would then ask me to reboot as the kernel was updated. But after the reboot there was no AppleTalk anymore to serve my old devices. Compiling a newer Armbian with an up-to-date version of Debian is of no use to me as I run software (A2SERVER) that is incompatible with newer systems. So how can I upgrade my system without loosing AppleTalk (which I configured as a kernel module when compiling two years ago)? …

Hello. I have the following problem with my Orange Pi PC: When I turn it on, only the green and orange LEDs of the ethernet port are flashing. There is no output on the HDMI port. I have already tried different microSD cards and different images. It used to work perfectly, but all of a sudden it stopped working. Maybe an issue with the power supply (it is the offical power supply 5V 3A DC jack).

I'm running Armbian off NVMe, and flashed the U-Boot SPI firmware (u-boot-sunxi-with-spl.bin → /dev/mtdblock0) so I no longer need an SD card inserted just to get it booting. That part works great. But now I'd like to be able to pop in an SD card occasionally to try other distros/images without disturbing my NVMe install — and it seems that's not currently possible: with an SD card inserted, the board still boots straight from NVMe and ignores the card entirely. Dug into it a bit over serial console: The default boot_targets is fel nvme0 mmc_auto usb0 pxe dhcp — NVMe is checked before the SD/eMMC. Radxa hit the same issue on the RK3588 boards and fixed it upstre…

Hi, I updated my system to version 5.20. This version is supposed to solve the problem of bluetooth.But this is not the case. Can you help me? thanks. ps : dmesg | grep ap6210 : 8.054958] [ap6210] select wifi ap6210 [ 8.058372] [ap6210] Initializing ap6210. [ 8.063627] [ap6210] platform device registered successfully. [ 8.067651] [ap6210] Using ap6210 configuration. [ 8.288340] [ap6210] WLAN placed in POWER ON [ 8.559560] [ap6210] Linux Kernel SDIO/MMC Driver [ 8.582485] [ap6210] Broadcom Dongle Host Driver: register interface [wlan0] MAC: 00:90:4c:11:22:33 [ 8.947049] [ap6210] WLAN placed in RESET [ 10.468573] ap6211: exports du…

USB-touchscreen doesn't work with Cubietruck 3.4.113. The touchscreen well works with versions 4.9.xxx, but doesn't work with 3.4.xxx. I connected the monitor 1920*1080 and a touchscreen to Cubietruck. Cubietruck smartly works in video browse mode, but the mouse and the keypad aren't always convenient for control. Especially at night, too loud clicks. I pasted a touchscreen on the monitor. It works with versions 4.xxx, but video doesn't work. And with versions 3.xxx on the contrary. What I should make that the touchscreen worked with version 3.4.113?

Hi, Installed ARMBIAN 5.60 stable Debian GNU/Linux 9 (stretch) 4.14.70-sunxi and got surprise: aplay: device_list:270: no soundcards found... Tried to fix with armbian-config -> System -> Hardware -> but it shows empty fields or blinks and returns to main System menu

Hi everyone. I have nano pi neo core 2 with ARMBIAN 5.75 stable Debian GNU/Linux 9 (stretch) 4.19.20-sunxi64. I try to change i2c speed from 100 000 to 400 000. I try: sudo fdtput -t i sun50i-h5-nanopi-neo-core2.dtb i2c0 clock-frequency 400000 Error at 'i2c0': FDT_ERR_BADPATH Anyone have idea how to change i2c speed?

Hi All I use Cubieboard2_Debian_3.8_wheezy_3.4.107.raw for my Cubie2 (2012-09-09). Looking at [uart_para3] in the fex (created with bin2fex after nand install) [uart_para3] uart_used = 1 uart_port = 3 uart_type = 4 uart_tx = port:PH00<4><1><default><default> uart_rx = port:PH01<4><1><default><default> uart_rts = port:PH02<4><1><default><default> uart_cts = port:PH03<4><1><default><default> I check if the pins is used by other 'function' And found that it used by lcd1_para [lcd1_para] ...snip... lcdd0 = port:PH00<2><0><default><default> lcdd1…

Hi, I'm using NetBIOS names when using ssh to access other CTs on my local network. Most of the CTs and other hosts are running Wheezy. Now I have a CT running Stretch and it's very difficult to access this host using 'ssh <stretch host name>' because it's not responding to the broadcas from the calling host. If I repeat the request (and broadcast for the name) multiple times then sooner or later the Stretch CT will respond in time. The timeout on the host doing the broadcast seems very short. Does anybody know where this timeout is specified and how to change it ? Thanks, Steven

Can the Audio port on the Orange Pi Win Plus A64 also output video (like TV output)? It seems like most of the orange Pi boards with an audio jack can do this and the CubieTruck (which is an A20 board) can do the same as well. Please let me know ASAP. Thanks!

Hi, I am having problems connecting my orange pi zero 3 to my TV via hdmi: No matter what I try the TV reports "no signal". Before I came to armbian I have tried the vendor-supplied debian and arch images and could not get hdmi output on any of them, so it might be that my micro-hdmi adapter is faulty or that the hdmi-port on the device itself is faulty, but over the weekend I cannot replace any hardware so I thought I try here to see if anyone has an idea on what to try. The image I am currently running is Armbian_community_24.5.0-trunk.58_Orangepizero3_jammy_current_6.6.17_gnome_desktop.img. When I log into the device I ca…

Is there an easy way to dual boot Armbian and OpenElec on my OrangePi PC.

I cannot get SPI working on my Nanopi Duo or rather there is no /dev/spi*. I build a custom Kernel with the build process and Network and other stuff works. Loading the spi-spidev overlay in various ways did not help. (Loading via U-Boot, during runtime, combine the overlay and devicetree and compile it as whole) By the way, the Images from https://www.armbian.com/nanopi-duo/ are not even booting through U-Boot for me. Some Infos:

Hi all, I want to set my Pi with specified hostname. I checked successful when cat /etc/hostname. Howerver, when I am using a Advanced IP Scanner to scan all the network, it just show the IP without the hostname while others raspberry boards have displayed as my attached image below. Thanks!

I'm looking to build an ntp server using the OrangePi Zero 3 and I noticed there is no pps-gpio device tree overlay for the h616 chipset only the h5 chipset. Has anyone created a custom dt overlay? Thanks in advance.

Hello everyone, I have a10 board and i'm trying to plug 7' LCD wich touchscreen (http://www.waveshare.com/wiki/7inch_HDMI_LCD_(B)). Chinese manufactorer changed usb pid/vid, and in fact this touchscreen is eGalaxTouch. And when i'm trying to build driver - it requires uinput module, which is missing. Is it possible somehow to get it? On my desktop debian /dev/uinput is preseted by default. Sorry for my bad english. Regards.

Hello, My project does not allow me to use SD card to boot and run my application. I can use SD card as drive to save my data. Is there any alternative way to do so ? Has anyone built a micro rootfs for O-Pi-ZERO NOR Flash ? Does anyone have an idea of the MINIMUM SIZE that is required to do so, if 2MB is too less ? Thanks Nbird.

I wouldn't ask for help here if I could find enough information to solve my problem. My program takes user-space GPIO interrupts as signals. It depends on this feature and GPIO interrupts are not replaceable. Testing code is as follows (on Pin12/PA07/GPIO7) by using SysfsGPIO: echo 7 > /sys/class/gpio/export echo in > /sys/class/gpio/gpio7/direction echo falling > /sys/class/gpio/gpio7/edge Check if it works with command `cat /proc/interrupts`: watch -n3 "cat /proc/interrupts | grep sunxi_pio" After configuration, give GPIO7 a pulse by attaching it to 3V3. This method does works on Orange Pi 0+ H5 running Ar…

Hello everybody, I'm new in armbian and Cubietruck. It looks to me that bluetooth is installed but if I scan for devices no devices will be found. I have the impression that something is wrong with the driver installation. I used the file image "Armbian_community_24.11.0-trunk.130_Cubietruck_noble_current_6.6.44_xfce_desktop.img.xz" for installation. Any help would be appreciated. Best regards Albrecht

I have an Orange Pi PC Plus running the mainline Debian Stretch desktop version of Armbian, but lately I've been using it headless. When I'm logged in over ssh and shutdown it down using "sudo shutdown -h now", the ssh connection drops and the board's LED flashes then shuts off, giving every indication the board is off. However, power consumption doubles (increasing from ~1.2W to ~2.4 W)! The problem persists as long as the board is powered, so I presume the board is hung and never fully shutdown. Any thoughts as to what could be causing the board to hang when shutting down?

Hi, I use OrangePi PC as my home samba server, as well as dlna server. It works from hdd, since I made a command nand-sata-install. I want to change the disc for a bigger one, how can I do this? If I will make rsync with all hdd will it be enough?

I have an orange pi zero3 with 2gb of ram. Ive installed the current 6.18.43 armbian debian build. It booted fine from SD and I then flashed the boot rom to the eeprom so I could boot from USB (sudo flashcp /usr/lib/linux-u-boot-current-orangepizero3/u-boot-sunxi-with-spl.bin /dev/mtd0) I was able to boot from USB0 fine but not from the USB ports USB1 and 2 on the 13 pin header. With the help of google and some ai I found that if I run the following my sd card is recognised when plugged into usb1 fdt addr bbf107b0 fdt set /soc/usb@5310000 status "okay" bind /soc/usb@5310000 ehci_generic usb reset usb storage That produced: Bus usb…

I've seen on webpage that there is a new kernel 3.4.109. I'm currently using 3.4.108 and apt-get update/upgrade delivered new root and also new uboot, but noit new kernel ... is this known or "as planned"?

Hi all, I've been using a banana pi as a home server since forever. It's currently running bananian with a legacy kernel. I want to use docker to make it cleaner to use so mainline is needed. My banana pi is running off a 256Go SSD (SATA) and connected through a Gigabit Switch (that's why I did not find many replacement over the years, both low power, SATA and Gigabits are hard to find even with Hardkernel stuff). So first what's running on my server now : * nzbget * nfs server * nginx as reverse proxy * nginx + php * MQTT server (Mosquitto) * MQTT relay server (with mqttwarn) * homemade domotic stuff For all of this, I guess docker will be o…

I am having a problem getting armbian 5.10 trusty to work on my pcduino3 nano lite. I tried both the Vanilla and Legacy kernels of the Trusty server flavor. With the Vanilla kernel I can see the boot process via usb console debug cable but when it gets to extracting kernel I lose output. With the Legacy Kernel via the console debug cable I get this error repeating: init: ttySAC2 main process ended If I try to ssh into root@<ip of pcduino> I get denied with password 1234 Any ideas what I am doing wrong? Thanks!

First time poster, hopefully I'll get along with all of you! I am currently trying to connect a DS18(b)20 cable to my Banana Pi M2+, which is running Jessie Desktop. I connected the 3,3 V to Pin 1, GND to Pin 6 and Data to Pin 7, as well as the recommended 4,7k Ohm resistor between them. Since, as I should have mentioned, I am an absolute beginner (literally just got into this a few days ago), I used a German tutorial for this, which told me to enter the following into my command module: After which my /sys/bus folder shows a "w1" folder, which it does. However, the cable itself cannot be found. After some tinkering, I found that w1-therm does not seem…

Hello, I know that armbian for orangepi prime is under development. Armbian does not detect the integrated wifi, and I'd like to know if it's not implemented yet or it's happening just to me

Hi guys, I've searched for some days now, but couldn't find any infos. My problem is: If I want to boot my Orange Pi Zero without Ethernet, it just wont start. It seems like it is waiting for me to put in the cable. This can't be normal, can it? I ask, because, what am I supposed to do if I like my device to connect exclusively through WiFi? Or connect to nothing at all, till I need some type of connection. For me, it is important to connect only through WiFi at the moment. The OS's I've tried: Armbian Debian Jessie "mainline" and "legacy", no difference between them. Thanks, Pyro

hi orangepi 2e+ with ARMBIAN 5.65 stable Ubuntu 18.04.1 LTS 4.14.84-sunxi syslog I want to mount my external hard disks with cat /etc/udev/rules.d/91-intenso.rules KERNEL=="sd?1", SUBSYSTEMS=="usb", ATTRS{serial}=="31700000000000007023", SYMLINK+="Intenso", ACTION=="add", RUN+="/bin/mount /dev/Intenso /mnt/Intenso" Normally no problem, tested with Armbian_5.65_Orangepiplus2e_Ubuntu_xenial_default_3.4.113 and Workstation PC Linux 4.15.0-43-generic #46~16.04.1-Ubuntu. With my current version, I have a problem. The udev-rule is/seem ok Spoiler orangepi@orangepiplus2e:~$ sudo udevadm test /sys/class/block/sdb1 calling: test …

Hello, my orange pi pc has recently started to have reduced speeds. Where I used to get the full 100Mbit on lan, I now get around 30Mbit, be it sftp, samba, http. Speed flanctuates a bit but stays around the 30MBit so no big differences. I am able to write with consistent speeds of over 10MB/s on the microsd so that can't be the problem (using dd) and full ~30MB/s on the attached sata disk. uname -a Linux orangepipc 3.4.113-sun8i #10 SMP PREEMPT Thu Feb 23 19:55:00 CET 2017 armv7l GNU/Linux Any ideas what I can check?

Hello everybody I expose my problem ... I create my own a20 card ( based on olimex a20 lime) ( 90% similar ) I have no problem with the hardware ....all work except ....leds ( you know in /sys/class/leds ....) But i need 3 leds ... so i write this in dts file ( sun7i-a20-olinuxino-lime.dts) leds { compatible = "gpio-leds"; pinctrl-names = "default"; pinctrl-0 = <&led_pins_olinuxinolime>; green { label = "a20-olinuxino-lime:green:usr"; gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; default-state = "on"; }; red { label = "a20-olinuxino-lime:red:usr"; gpios = <&pio 7 0 GPIO_ACTIVE_HIGH>; default-state = "on"; }; blue { label = "a20-olinuxin…

There is problem with the internal wifi on Orange Pi Lite and Armbian 5.20 (5.16 too). I installed tshark (and tcpdump) and try to capture wifi packets in monitor mode. Without success. What's better. Aircrack-ng works flawlessly. I think, pcap library has a problem with switching the device to monitor mode. "dumpcap: The capture session could not be initiated on interface 'wlan0' (wlan0: SIOCGIWPRIV: Argument list too long)." 'iwpriv' command runs without error, but the private command list is really long. Buffer too small?? Dumpcap run with no errors on external USB wifi dongle (TP-Link TL-WN722N), so I think problem is in firmware of internal wlan chip…

HI, I'm testing Debian wheezy, for now work well but i cant use LCD How do I change display out ?...in olimex image I had some script like ./change_display Thanks

Hi, I'm new user. I want to install owncloud in my orange pi+2. Someone can help?

Hi: I am confused. The current armbian for cubietruck is still:Armbian_5.20_Cubietruck_Debian_jessie_3.4.112_desktop-2.7z but on the download page it states that version 5.23 is the latest version. What should I do to get the latest version? (as of today Nov. 13,2016

Hello there, I am looking for some feedback/suggestion about an issue I have. Installed Armbian legacy kernel just yesterday. Then I have plugged https://www.olimex.com/Products/USB-Modules/MOD-WIFI-AR9271-ANT/ to enable wifi and found out I missed required firmware. I installed such firmware (htc_9271.fw) first by Ubuntu linux-firmware package, then tried with armbian-firmware-full, then I have downloaded from here http://linuxwireless.org/download/htc_fw/1.3/ (putting in /lib/firmware and after failing tried also /lib/firmware/ath9k_htc like package manager does. I have also tried compiling my own version from here https://github.com/qca/open-ath…

Hello guys, I am experiencing such a problem: When I boot my orangepi it starts and it is visible in the router's page view getting IP with dhcp. As soon as I connect over ssh (at least this is the way to trigger it, not sure if it is hapening automatically after a while), the device disappears from the network and it is no more available! I have seen this behaviour happening on 2 different routers. Then I rebooted the device again and in the router config I put the same IP statically linked to the device and I tried to connect over ssh and it worked without disappearing anymore. So it sounds like a bug somewhere using dhcp protocol. Is som…

Hello I have a little problem with the usb devices, i use usb camera and if u plug the power supply to the OPI Lite board (5.25) it recognize the camera but it doesn't work well (stream with like 8-10 fps), after a software reboot, the device go to other Bus and the camera work fine with 15-30 fps stream. Before reboot, exact on first power of the board: Bus 006 Device 002: ID 058f:3822 Alcor Micro Corp. Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 002: ID 0bda:8176 Realtek Semiconductor Corp. RTL8188CUS 802.11n…

Hi guys, Quick question about the USB ports on the Cubietruck. Once I am done with the usual setup procedure (changing the root password and setup a user) system reboot. I sometimes end up in situations where I need to access the Cubietruck directly and not through ssh. In such situations I noticed that my usb keyboard and mouse do not respond at all, eventhough if these are the exact same ones hich I used to the 1first time setup. What could be the reason for this ? Thx,blub4747

Somehow I manage to get online on this system . Updated a few files .Wow it is getting interesting . I think this network manager inbuild is pathetic . The system only reads from the terminal. Anyway android is the only way to get net into this system.Well of course I have to figure out a bit , stay up some nights. I have myself why keyboard gave wrong keys. it is very usable now except that it needs some gpu acceleration, and more of a GUI presentaion.My HD display needs some good video rendering .Anyone, tell me how to copy paste in terminal, also I kept my screen at 1080p , I think it is not appropiate.Text in terminal are so small. OK for tether…

Hi guys, I bought the orange zero and then I realized how poor wifi. I had some wifi modules from old tablets at home, they are rlt8188eu. After I joined the orange, there was another problem. Wifi driver could not be initialized, because I knew that these modules can operate on orange pc out of box, I began to research the problem. Cause I am linux ZERO, it took me longer time, but I finally found soulution. Problem was in fex file for orange zero, wifi_usbc_type = it´s without parameter, after I added some parameter ( "5" from working orange pc fex), wifi work like a charm. I´m not sure if it´s purpose, or bug, so I write you....

Hi, I tested my board with below armbian distro. Question is , there are lots of entry about H3 hw decode problems, are these fixed in this distro? When i open 1080p mp4 Big Buck Bunny video still doesnt work is that any specific settings to work with hw accelerated decode. How can i be sure that hw decoding is running with VLC? or any specific ffmpeg command. Linux orangepipc 5.10.60-sunxi #21.08.1 SMP Wed Aug 25 18:19:32 UTC 2021 armv7l armv7l armv7l GNU/Linux I tested video with - VLC using 55% cpu - MPV using 40% cpu Umit

Hello, I've issue with nameserver. My router DHCP DNS server point to the Pi which has IP 10.6.6.3. But for unknown reason 1.0.0.1 keep added in the /etc/resolv.conf: # This is /run/systemd/resolve/resolv.conf managed by man:systemd-resolved(8). # Do not edit. # # This file might be symlinked as /etc/resolv.conf. If you're looking at # /etc/resolv.conf and seeing this text, you have followed the symlink. # # This is a dynamic resolv.conf file for connecting local clients directly to # all known uplink DNS servers. This file lists all configured search domains. # # Third party programs should typically not access this file directly, but only # through the symlink a…

Dear Sirs and Madams! I am working on custom minimal image for NanoPi NEO and I've managed to solve majority of problems, however, if I observe boot process via /dev/ttyUSB0, I still get these two errors: HELLO! BOOT0 is starting! boot0 version : 4.0.0 boot0 commit : 1b3a1b587482affdd18aba923de7fe38eb7d5ee1 fel_flag = 0x00000000 rtc[0] value = 0x00000000 rtc[1] value = 0x00000000 rtc[2] value = 0x00000000 rtc[3] value = 0x00000000 rtc[4] value = 0x00000000 rtc[5] value = 0x00000000 rtc[6] value = 0x00000000 rtc[7] value = 0x00000000 DRAM DRIVE INFO: V1.3 the chip id is 0x00000081 the chip id is 0x00000081 the chip id is 0x00000081 the chip id is 0x00000081 the ch…

Hello everyone. I have installed the Armbian Xenial Multimedia and desktop usage scenarios on my orange pi pc plus. Setup user and new password successfully. By using the command armbian-config I have solved my keyboard issue and language. Also network Lan0 is ok By typing sudo apt-get update and upgrade my orange is now updated succefully. But how to start the desktop ? I can only see the black screen with prompt command. If I reboot it , after all [ok] ...... I read Ubuntu 16.04.5 LTS orangepipcplus tty1 login ...... Did I do some mistakes?

Hi everyone, I am using nmtui to setup static ip both eth0 and wlan0 on orange pi zero. It works fine if only one of them was activated I want to use both. If LAN cable was be connected into pi, the board is run on ethernet. On other side, run on wifi when the cable was pluged out When I rebooted the pi without LAN cable, the eth0 auto activated lead to I can't access the module via wifi even though it is connected successful. I must connect via serial and disable eth0 after that I connected via wifi.

Hello I have an allwinner H2 & H3 (PC +) when it does not boot on my LAN. If I want to try to use the LAN port. In / etc / network / interfaces the eth0 interface is not defined. I tried to change the iso but on Windows the iso is not valid. On Linux Linux the files are not -w and try to change but not possible !!! If I want to try to use the UART port and PuTTY it doesn't go with in the prompt. U-Boot 2020.04-armbian (Sep 02 2020 - 10:21:09 +0200) Allwinner Technology CPU: Allwinner H3 (SUN8I 1680) Model: Xunlong Orange Pi PC Plus DRAM: 1 GiB MMC: Device 'mmc@1c11000': seq 1 is in use by 'mmc@1c10000' mmc@1c0f000: 0, mmc@1c10000: 2, mmc@1c1…

Any advice for building for the H5 flavor of the Zero Plus? I am not new to kernal compiling or embedded systems dev but am rather new to compiling linux kernals FOR embedded systems. Currently using the H5 image from here: https://www.armbian.com/orange-pi-zero-2-h5/ but there is no easy option to target this board when building from source.

Hi I just download "../orangepizero/Debian_jessie_default.7z". When I try to login first time type password 1234 it not ask change it session hang. Below is ssh debug. What is wrong?? ... debug1: Trying private key: /root/.ssh/id_ecdsa debug1: Next authentication method: password root@91.154.12.130's password: < 1234> debug1: Authentication succeeded (password). Authenticated to 91.154.12.130 ([91.154.12.130]:22). debug1: channel 0: new [client-session] debug1: Requesting no-more-sessions@openssh.com debug1: Entering interactive session. And nothing hapend after that.

I tried to create my own image using the build script for Orange Pi Zero. But starting this crashes immediately. Any suggestions? U-Boot 2017.09-1 (Oct 13 2017 - 11:04:53 +0200) CPU: Allwinner H3 (SUN8I 1680) Model: Xunlong Orange Pi Zero DRAM: 512 MiB MMC: SUNXI SD/MMC: 0 *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Net: phy interface0 eth0: ethernet@1c30000 Hit any key to stop autoboot: 0 switch to partitions #0, OK mmc0 is current device Scanning mmc 0:1... Found U-Boot script /boot/boot.scr 3382 bytes read in 125 ms (26.4 KiB/s) ## Executing script at 43100000 U-boot loaded from SD Boot script loaded f…

I have tried to set up a Banana Pi M1+ as a wireless router (installed Armbian_5.35_Bananapi_Ubuntu_xenial_next_4.13.16 ). Existing set up and testing environment are as following: Now, my android phone can access the internet and the Banana Pi works as expected. However, when I checked the file /var/log/syslog of the x86 router, I found : Jan 20 00:12:51 router86 kernel: [25688.378214] IPv4: martian source 104.17.115.27 from 10.111.103.154, on dev br0 Jan 20 00:12:51 router86 kernel: [25688.378253] ll header: 00000000: 00 e0 4c 68 12 86 02 d4 09 42 7c 37 08 00 ..Lh.....B|7.. Jan 20 00:12:51 router86 kernel: [25688.378422] IPv4: martian …

Hello. I change from diet pi to my own compilation of armbian with rt kernel patch (orangepi zero) In dietpi the my python code run perfectly the lcd screen (GPIO) but in armbian the code fail. When I try to install GPIO with : sudo modprobe sunxi-gpio The output is: modprobe: FATAL: Module gpio-sunxi not found in directory /lib/modules/4.13.9-rt1-sunxi Very thanks How I can repair this? pd: I enabled all gpio overlays in armbian-config Also, I founded this, but I dont understand What is proposed here is for all pins or only for the ones set, and if this can work with I2C, Spi, etc... Thanks a lot in advances.…

Hello, I am developing a project that will use the ethernet module ENC28J60 on orangepi pc plus, but I do not know how to configure armbian to enable using the module. Searching the internet I just found solutions for raspberry. I have already enabled the spi-spidev option using the armbian-config tool. What should I do now? Thanks.