Amlogic CPU Boxes

Hi, I am currently using MagicBox M16S to flash Armbian. However, I did try to use VIM2 Armbian img to flash into my magicbox but it wont worked. Currently it seem like my device is bricked ( try to flash original ROM from some china website but it stuck at 1% and fail). Do anyone have idea on this device? Thanks~

Hi. geeks So i've installed v25.05.0 armbian bookworm 6.1.21 on my tv box and so far no bluetooth and wifi My chipset is Cdtech 47w3155. rfkill gives nothing. just blank space

Thanks to this forum I had installed Armbian buster and it's been running really well and stable for 3 years. For the first time I've arrived at an issue which makes me revisit and also because I have forgotten most of the stuff. Back in the day balbes150 had a bunch of ready made images available and you picked the correct device tree after flash. Appears those links no longer work. I don't want to do a massive upgrade, just from buster to bullseye on my week play 2 box (s905h only uses 4w when running) My question is where can I get those old images again. Or a newer resource for ready made images that will work on my box.

Boot stuck at s9xx login, won't recognise any keyboard input. Any advice please?

I tried to start armbian on my tvbox mxq pro 4k 5g with the s905w architecture and using the Armbian 25.5.0-trunk.256 Bookworm gnome image with the dtb meson-gxl-s905w-tx3-mini.dtb with the uboot u-boot-s905x2-s912 and when it starts it goes to this screen. Screenshot

My box with s905x processor (kinhank super console x nes) does not boot armbian despite trying all kinds of methods and placing the correct files, it boots android in eMMC, I tried the toothpick method.

I have located a G11 pro and would appreciate guidance on how to install Armbian on it. I have attempted various solutions, but none have been successful. Additionally, I am unable to select from the recovery menu without a remote control.

Hi, i have this tv box { H96 Pro+ (ZH01-S912-TVBOX-v2.0) Green board} WISDOM variant the problem is some apps does not work anymore on it and i'm looking for any version higher than the stock 7.1.2 the tv box works now on this firmware s912_q9377-H96_KDMC17.3_50ME_600M_mac-20170918.img https://mega.nz/file/7xFxgJrC#Hrya4fKeKJmZxPu0v2stH-nygBzodSQVm3qRmVDaIgw I appreciate your help and thanks in advance.

Hello, i think i bricked my H96 Pro Plus, like a year ago i installed Armbian on it. Today i flashed a SD with a new version, reinstalled octoprint etc and finally tried to burn it to the emmc using "./install-aml.sh" it seemed to work the process ended and i powered it off, removed the SD and tried to boot it up. The only thing i see is the H96 Pro+ Logo and thats it. I tried to boot from the SD Card again but it didn't work. I reflashed the SD card, changed the dtb file etc, just to make sure it would boot normally but nothing. Im at that point where i think its bricked and i need to do some maskrom magic but i have no idea what to bridg…

Next Minix Mediabox 16 GB Android 11 TV Box armbian s905y4 image download please link??

Hi , I have a H96MaxX2 (s905x2) tv box I tried installing armbian but its stuck on starting kernel. Can someone tell me the steps to install it perfectly on my H96MaxX2 (s905x2) Thank you

I’m using the DEVMFC version [https://github.com/devmfc/debian-on-amlogic]. Additionally, I took the `/boot` partition and copied all the files from the Devmfc_Ubuntu-Oracular_6.12.11-meson64_Minimal-25.01.24.img.xz image. Then, I downloaded the same version available from the Armbian community, but with a graphical interface: Armbian_community_25.5.0-trunk.4_Aml-s9xx-box_noble_current_6.12.12_xfce_desktop.img.xz. I first flashed the Armbian image onto a USB drive. Then, in the `/boot` partition, I moved all existing root files into a `/backup` folder. After that, I copied the files from the DEVMFC version into the root of the `/boot` partition on the USB driv…

Hi, I'm trying to repurpose my Vero 4k (not 4k+) by installing Armbian on it. The device is based on the S905X and it looks like the most recent versions include a dtb for 4k, thanks to the work done by chewitt. I used the AMLogic s9xx TV Box edition and followed these instructions in the forums to copy the dtb and u-boot. However, I'm having some trouble getting the device to boot into an SD card flashed with the Armbian image. I was wondering whether anyone else has some experience with this. Here's what I tried so far: Downloaded and extracted the image (I used the Minimal/IoT version) Wrote the image to an SD Card (tried two …

Hi, I installed armbian on the emmc of Magicsee N5+, it work very well. But after kernel update, I'm unable to restart the emmc system .... I tried 5x on the 3 last month, and I always have the same issue .... Is there any solution ? Maybe it links with this error message after update :

Hello. I'm trying to install Armbian on my KI pro coming from Coreelec, I've succesfully restored the boot logic using this https://wiki.coreelec.org/coreelec:restore and selected the right u-boot, it boots ok. Ive tried several dtb files but no one works like expected, also tried my current dtb from coreelec but same behaviour. I have these messages like this one [ 164.092003] meson-gx-mmc d0070000.mmc: unaligned sg len 720 blksize 512, disabling descriptor DMA for transfer and also some other related to eth port. I guess its due to kernel version or armbian itself version (tried the latest community maintained for tv boxes). My questi…

I installed Zabbix 7.2 . as a result, I get a network scan error "'ICMP ping' checks failed: "/usr/bin/fping: can't create socket (must run as root?)"

In the latest Armbian versions, I can't find meson-sm1-hk1box-vontar-x3.dtb. Which DTB file should I use instead, or where can I get it?

Hello! I have no video output on Nexbox A95 (s905x) after boot (I can see the screen during boot up process), on the Armbian desktop build. Is there any solutions that I can implement to solve this?

Hi I have installed an image from the SD - "Armbian_community_25.2.0-trunk.337_Aml-s9xx-box_noble_current_6.6.71.img" installed in EMMC now the question is - how to run WiFi on it?

I have a tx3-mini 1G-ram 8G-Rom device and I installed the versions images available on the site on it. I have three questions: why does it stop working when I update the operating system? - The site of benchmark says that the s905w cpu has a speed of up to 2GHz, but my system does not speed up more than 1.2 GHz. And the last question: some of the images available on the site are installed on it, and some are not. The ones that work also stop working with the update. Of course, not with a single update, when it works for a week, you update it during the week, and from some point on, it will not boot again. This is because my device is fake?

Hello all, I installed armbian on my TV box. It work correctly (I installed home assistant and It work properly). however, I have a problem with bluetooth. It doesn't work. I do some investigation : install the bluetooth support with apt-get update && apt-get install bluetooth check if this work with : service bluetooth status and it return bluetooth is running I try to connect device with bluetoothctl and it not working. It return No default controller available version : v25.02.0 for Aml.S912 running Armbian Linux 6.6.67-merry-christmas Packages: Debian stable (bullseye) I use this dtb file : meso…

i have burn images armbian latest desktop version from official armbian website. but after finished burning, not showing Boot partition as usual. i have to change dtb file with working one from original dtb board.

I have "x96 mini" TV box with seemingly broken eMMC chip (unable to write firmware by USB). S905W SoC. First I've tested if it can boot from SD-card, made with Amlogic Windows utility "Burn Card Maker". The answer is: yes (see the logs below). Spoiler GXL:BL1:9ac50e:bb16dc;FEAT:ADFC318C:0;POC:3;RCY:0;EMMC:800;NAND:81;SD:0;READ:0;0.0;CHK:0; no sdio debug board detected TE: 197450 BL2 Built : 20:32:17, Sep 8 2017. gxl g6296b83 - xiaobo.gu@droid12 set vcck to 1120 mv set vddee to 1070 mv Board ID = 2 CPU clk: 1200MHz DQS-corr enabled DDR scramble enabled DDR3 chl: Rank0 16bit @ 792MHz Rank0…

I people, I get a tv box model "T96 D", but in the manufacturer site, this model doesn't exist. In the board is writen "T96 Mars" so, I follow the armbian installation steps for this model, but after "Starting kernel" the screen was black. I share images of the board and the screen. Thanks for advance guys.

Hello guys, it's day i'm trying everything to let my S905x TV Box run Armbian but i keep struggle at toothpick multiboot. Android recovery stays with the green android with the ! out of its tummy and hang with the "Cannot load volume /misc!" error. I opened the log and find out "failed to mount /dev/block/mmcblk0 on /sdcard by read-only (Device or resource busy)". I downloaded the image and wrote it on a 32GB MicroSD card via Rufus, Could someone please suggest me how to proceed? Thank you, Marco

Hi all, and thanks you all so much for sharing time, effort and knowledge about this boxes. I'm reading this forum a lot and also learned from advanced users. Me only start to play around, doing some test with trial and mostly errors! First all, I'm not sure if this goes here, please move it if necessary. This box come with a S905X2 SoC, and while working fine with an ATV12, I think I brick it and I only partially can boot from SD-Card burned with a full image I take with an Armbian version (SD-Card), doing dding of their eMMC. So the first I notice is that in UART console first line I see is hex character in a loop, I don't see normal …

Hello, I have an issue with my box, which keeps freezing without any apparent error signals. It's probably me not knowing where to look, so I'm kindly asking for your help to understand how to proceed in identifying the root cause. My box is a MXQ PRO 4K (Leelbox), I'm using meson-gxbb-p201.dtb and u-boot-s905. Current version: v25.2 rolling for aml-s9xx-box running Armbian Linux 6.6.66-current-meson64 The box works perfectly for some hours, then it goes offline and disappears. The led is still blue (on), but even if I attach and hdmi cable there's no signal. I tried to leave a couple of ssh sessions opened to see what's happening bef…

I have a SDMC DV8040 stb ,SoC-CPU-Quad-core 1.2 GHz,GPU-ARM Mali-450,RAM-1GB,Storage-8GB it currently runs custom made android 9, i tried various methods , none of them work , it doesnt boot with Amlogic S805X,, earlier i tried to boot armbian , nothing happen, i found a way to get the uboot shell , i soldered wires on uart pins , i can interrupt booting process ,i attached the printenv file , now i want is command to manually boot from sd card via uboot and write the os on flash memory permanently. i want to know what is the suitable .dtb file ,,all i know is s805X is low cost version of s905 Amlogic soc. its been 2 years im trying to boot amlogic to stb ;-/. need your h…

Hi, I own a Mini Mx III - II (S905X) that I "flashed" with an micro SD with install script. The tv box without any micro sd card inserted boot perfectly afterwards. I keep it but today, after few months I see that I have this image installed: Bookworm 23.11.1 Armbian_23.11.1_Aml-s9xx-box_bookworm_current_6.1.63_xfce_desktop.img.xz I have seen now that we have this version: 25.2.0 Armbian_community_25.2.0-trunk.86_Aml-s9xx-box_bookworm_current_6.6.63_xfce_desktop.img So I have tried to use armbian-config system firwmare update to get up to 25.2.0. After waiting to download and installa pack…

Hello everyone, good morning! I own a Super Console X2 Pro (https://a.aliexpress.com/_mNgWh7z) and I am trying to install Armbian on it to use it as a server. I followed the tutorial from the forum, but I can't get it to boot into Armbian: To attempt the boot, I am using an Android terminal app with the command: su reboot update But it always goes to the recovery screen. I also tried through the update app, but the USB drives or SD cards I used do not appear in the Android TV Box, even though their folders show up in the recovery menu. I am attaching screenshots of all the information I found relevant to solving the p…

I wanted to ask if any of you tried to install Armbian on this TV box Mini M8IIS with (S905x ampak6212) I know it may be old but maybe it will work

meson-gxm-m8s-l.dtb I created a working dtb for Mecool m8s pro L: LAN+WiFi+Bluetooth; H1601SG + QCA9377. The Bluetooth GUI doesn't work under XFCE, but you can use "bluez" console app. meson-gxm-m8s-l.zip

Help, with my TV box, it keeps restarting and does not load Armbian. Its specifications are as follows: Processor: Amlogic S905X quad-core, 64-bit, Cortex-A53 at 1.5GHz (4-cpu) Graphics Processor: ARM Mali-450 MP3 RAM: 2GB Internal Storage: 8GB Operating System: Android 10 api29 Audio Formats Supported: AAC, WAV, MP3, and others Video Formats Supported: H.265 10-bit 4K * 2K @ 60fps, VP9 4K * 2K @ 60fps, H.264, MPEG, MKV, MP4, and other video formats Image Formats Supported: JPG, BMP, PNG, and other formats Network: Wi-Fi 2.4G / 5G 802.11a / b / g / n / ac; RJ45 10M / 100M Power: Input AC100-240V 50/60Hz – Output DC 5V/2A

Hi, My STB run latest Armbian from ophub Armbian_24.11.0_amlogic_s905x3_noble_6.6.58_server_2024.11.01.img.gz. it run on microsd with change the dtb file location in uEnv. But i made mistake with remove partition on eMMC and format it to BTRFS. Now my box is just bootlop. I try to recover using USB Burning Tool with oem Firmware but it always end with romcode error. I Try using TWRP with boot maker it can enter TWRP. i need to press the toothpick on AV jack. When i try to install the oem Firmware it say that emmc is 0mb. I try to change the file system with advance wipe option but got error that the storage can not mount. I guess the TWRP not recog…

Hi ! I started from SDHC armbian-24.08 on my Magicsee N5+ (s905x3). I installed system on the eMMC. But now, the system can only start on the eMMC, but only with the toothstick method ... And I can't start again on the SDHC to try the 24.11 for example. Is that any solution : 1. to make start on eMMD without toothstick 2. to start system with SDHC Thanks for your help

I have this box for years now, I want to run linux on it, can it actually happen, this device is very old though. It has 2gb ram, with 26gb storage

Hi, posting a solution I have found how to boot Armbian on S905x device Scishion V88 Pro My device: * works, boots into an Android (has working u-boot) * has no reset button * contains thirdparty Android ROM that does not allow to enter aml burn mode * cannot use Android update app * does not respond to eMMC pin short (like in this post) The only way to boot Armbian in this case is to solder serial console, interrupt u-boot and run recover from sd card command: 1. solder serial console 2. connect usb-serial adapter 3. insert Armbian prepared SD card for your amlogic CPU version …

Hi, I have installed Armbian on an SD card and can successfully boot from SD by holding reset button during power plug. Given that it is not possible to install Armbian to eMMC on S905, is it possible at least to make it always boot from SD?

How do i boot and install armbian on a T95m tv box? i held the reset button, plugged in power and released after about 5 seconds but it keeps booting into android...

Hi. I have an old Tanix TX3 box that I want to use as a backup [1 part of the 3-2-1] drive. I installed Armbian_24.8.0_amlogic_s905x3_noble_6.6.46_server_2024.08.15.img and I'm currently in Armbian OS 24.11.0 Noble with Linux 6.6.53-ophub. I tried to mount several USB drives and even an nvme external drive and can get it to work. Can, anyone, please help me? Thanks. Miguel

Hello community, I have this TV box which came rooted, so I was able to extract the dtb from /proc/device-tree with the command from the running android dts -I fs -O dtb -o d9.dtb /proc/device-tree but the box keeps rebooting when I try to use it I've been able to boot this box with armbian 24.04 and the # FDT=/dtb/amlogic/meson-gxl-s905l-venz-v10.dtb DOESN'T WORK # FDT=/dtb/amlogic/meson-gxl-s905l3b-m302a.dtb BOOTS # FDT=/dtb/amlogic/meson-gxl-s905l3b-e900v22e.dtb BOOTS # FDT=/dtb/amlogic/meson-g12a-s905l3a-m401a.dtb DOESN'T BOOT # FDT=/dtb/amlogic/meson-g12a-s905l3a-cm311.dtb DOESN'T BOOT # FDT=/dtb/…

I was unable to get Armbian_community_24.11.0-trunk.66_Aml-s9xx-box_bookworm_current_6.6.47_minimal to boot on my TV-Box (X96Max+ 100 vA 4GBRAM). I tried using the meson-sm1-x96-air.dtb because this is the model I use for Coreelec. This did not boot at all, the system just boots to Android (Slimbox). I also tried this image “Devmfc_Debian-Bookworm_6.6.49-meson64_Minimal-24.09.05.img” from this project: https://github.com/devmfc/debian-on-amlogic This image at least tried to boot. I got a blue screen and a stuck boot loop. Back to Armbian, I tried copying the Devmfc file “meson-sm1-x96aira100.dtb” from the into the Armbian boot folder an…

Hi, does anyone here have a download link for armbian version 22.04? I need it, because the info says Casa Os runs well on Armbian version 22.04, Thanks in advance

Hi, I have these 3 Android TV boxes, chipset : Amlogic S905D Quad core ARM Cortex-A53 Amlogic S905-B, Quad core Cortex A53 Amlogic S905 Quad Core Which of these boxes can have Armbian installed on it, specifically onto the internal eMMC memory? I am willing to use even older versions of modified armbian that can be installed on the emmc without upgrading. Especially if it can be installed in emmc. If it is not possible to install it in the internal emmc memory, how can I at least use the internal emmc memory for data (Boot from SD card, use internal memory for data) ?

Hi everyone i have wanted to do something wiht my useless tvbox and wanted to turn it into ubuntu pc and followed the guides to do so butit doesnt want to boot the img file how do i do this???

Hello guys! I have a T95Z Plus TV BOX with 3GB RAM, 32GB ROM, and an arm S912 CPU. I can run Armbian just fine from the SD card, but when I try to install it on the eMMC, I get an error message saying something like, "You're already running from eMMC, or the eMMC was not found." And, obviously, I'm not running from eMMC, so it seems like the system just isn't detecting it. I did some research, and it seems like there might be different eMMC manufacturers for the same T95Z Plus model. So, I might need to adjust the "Max frequency" parameter in the .DTB file for the T95Z Plus in order for Armbian to recognize the eMMC on my device. D…

Hello I have a vontar x3, S905x3 tv box and I have installed the latest Armbian 24.11.0-trunk.66 Noble Gnome version. If I made an apt upgrade the box does not boot. If I freeze Armbian Kernel Update through armbian-config utility (freeze update of armbian-firmware linux-dtb-current-meson64 linux-image-current-meson64 packages), I can make apt upgrade and the system boots and working fine. Is the above behaviour normal or I am missing something? Thank you in advance.

Got Armbian to run on those $20 TV Boxes sold at Wal-Mart. This is for the Dopinder variant, i have not tested on the newest version (YOC) but I will likely pick one up just to see. -removed- Requires a few changes outside of the norm for armbian builds, so it's on my own fork. Likely will not be doing a PR. That said, it pulls the latest armbian source when building. https://github.com/sicXnull/Onn4K-TV-Box-Armbian Needed: OTG Cable (required) USB Hub (recommended) USB to Ethernet adapter (recommended) Working HDMI Audio Bluetooth Wi-Fi Building: git clone https://…

Hi, I'm new to the Armbian community, but I have used Linux before. Recently, I followed this tutorial: https://i12bretro.github.io/tutorials/0316.html to flash Armbian 20.10 Bullseye on what I suspect is a fake TX3 Mini. It has a red motherboard probably not a p-281 board, it could be a q201_N device as twrp said before installing Armbian. Anyways, Armbian detects 1 GB of RAM and 16 GB of internal storage in it. It most likely has either an S905X or S912 CPU since I used "u-boot-s905x-s912" during the process. After flashing the SD card with Armbian, I was able to boot successfully. I then installed Armbian using the terminal with "inst…

i have buy cheap tv box tripsky mini q3, i have look on recovery is based a95x_r2 and have this specs : and i search on google for dtb is in here : https://github.com/torvalds/linux/blob/master/arch/arm64/boot/dts/amlogic/meson-gxlx-s905l-p271.dts i don't know how to port this, because i don't have any experience for porting this support, any support on this ?

I've been trying to run Armbian using the Armbian_community_24.8.0-trunk.554_Aml-s9xx-box_bookworm_current_6.6.45 image along with a 16GB Sandisk Ultra SD Card (flashed using balenaEtcher), and my main issue is initramfs not being able to mount /dev/mmcblk0p2 as a root file system. I've tried using the solution listed here, but it didn't work. How can I resolve this?

Hello everyone! My sound is only output via hdma, there is complete silence via spdif. And I need spdif specifically Any ideas on how to fix this? My tv-box is H96 max x3, I boot up via the Ugoos x3 device tree. Who has sound via spdif on a tv-box with Armbian? On which tv-box exactly?

I need some help for My TV Boxes / STB That Run Armbian Debian Because The kernel panic every im booting , Any Solution ??

Hello all, did any body able to login to Cinnamon version (screen shot below from here ) ? The box is A95X F3 Air first edition. For me it Bootes well and after root and user passwords are set it shows up desktop login screen and then after user login the desktop simply goes blank. On reboot again user login screen appears on the desktop but again blank screen after login. On the other hand the Armbian 24.8.0-trunk.399 Bookworm Gnome worked fine. I don't want any troubleshooting or run through logs and spend time on this but if any body faced such issue before just reply back if this happened with your box as well.

Hi there! Firstly, a huge thank you to all the maintainers for this amazing project. I was hoping you could assist me with two questions: Which version of Armbian (Desktop or Server/IOT) would be better for running TVHeadend on my device? How can I add the DVB-S2 drivers to my device? I've come across this post: However, I'm unsure how to add those drivers myself. Any help would be greatly appreciated. Thank you so much!

I have recently found this great project and have converted my old unused and dusty s9xx TV Boxes to ARMBIAN for use as remote NAS and other applications. I have X96 Max Plus 2 T, Beelink GT1, and 2x Beelink MiniMXIII II (total of 4 boxes). For the Beelink MiniMXIII II I used the meson-gxl-s905x-p212.dtb out of the box and it works great (100Mbit Ethernet and WIFI) For the X96 Max Plus I had to go to https://github.com/ophub/amlogic-s9xxx-armbian/releases and extract and use the meson-sm1-x96-max-plus.dtb file (Gbit Ethernet works but WIFI doesn't) For the Beelink GT1 I again extract and used (from https://github.com/ophub/amlogic-…

I use Armbian_21.11.0-trunk_Aml-s812_focal_current_5.14.0 and tried to find the method on the website. But I still don't understand. Thank you.

Hello , I have an HK1 box Chipset: S905X3 running Armbian, I noticed that the box contains 2 LEDs (Blue and Red). Is it possible to do PWM with one of the outputs of one of the LEDs?

It's a s905w2 chip. I can only find dtb 2gb. It's a newer chip so I'm looking for a boot one. Not at all. Thank you for answering.

Hi, I have an old Android 6 TV box that is slow (1GB ram), i think it's an S905 because it's the only kernel that can boot and its mainboard is a "gxbb p200" as I see on Aida64 : I just tried to boot the Armbian_community_24.8.0-trunk.139_Aml-s9xx-box_bookworm_current_6.6.33_minimal.img I flashed it on a 16GB microSD card on an SD card adapter. Then I added the line : FDT /dtb/amlogic/meson-gxbb-p200.dtb just after the lines label Armbian_community kernel /Image initrd /uInitrd fdtdir /dtb/ into extlinux.conf file. and then I renamed the u-boot-s905 file to u-boot.ext But the s…

After trying to update using an SD card, my box powers on but does not send anything to display. I have previously tried to flash using USB 2 cable with the USB burning tool but I get a "Romcode/Initialize DDR/Read initailize status/USB Control setup error" message at 2%. I have tried 3 different files to the same effect, hence why I used SD cars and I am unable to fix the box using the USB tool. I need a boot image so I can try to fix it via SD card but I cannot find one anywhere. Please does anyone have a boot image I can use or can point out where I can find one or a way of fixing this by SD image?

In at least a couple of occasions, my AMLogic box failed to boot after an attempted upgrade of `armbian-bsp-cli-aml-s9xx-box-current`. I did not keep a detailed report of the first time it happened, but at the time I am pretty confident it was due to the issue addressed in PR #6287. Now, it happened again, I believe following PR #6659. Maybe @SteeMan you can take a look?

Hello everyone, I tried to erased data from settings menu to start fresh again and prepare this old box not used to give it to another family member. Probleme is that the process reset to factory was shut down before it ended (was taking ages).. So now it doesn't boot properly. I tried to operate wipe data / reset factory in recovery mode but ended in an error (mount failed). Also now i don't have operational remote.. 1)How to reset it properly ? 2)Is there any software to do that ? (i downloaded Aml_burn_tool recently but need help with which image should i load ? 3) Is there any way to force the box to boot …

Problem: It starts to boot, I see the Armbian splash screen, it stays for around 10 seconds then goes back to console with the (initramfs) prompt. Last 2 lines of boot process are: Begin: Loading essential drivers . . . done. Begin: Running /scripts/pre-mount . . . (initramfs) [ 37.824201] random: crng init done (initramfs) I got it to boot once into GNOME by putting a USB flash drive with the burned image AND a SD card at the same time. But that was only once and I could never repeat it. This happens on both versions of the X96 I have. And I've followed everything here: I've tried bookworm…

Hello, I have a ZTE B866V2 tv box that has an Amlogic S905X2 - b processor. Try to install armbian in all possible ways, with different versions and methods, always following the instructions on the forum. My problem is that when I try to boot from the SD, the TV box simply starts its own operating system and does not load armbian. I got my TV box because my television company gives them to watch programs, but after I no longer paid for the service they gave them to me. They run a modified android tv system. I mention all this because I keep in mind that it could be the root of my problems. I leave you the link of the exact model: https://www.androidtv-g…

This is an Android TV box using the 922 chipset. Under Android, I have been using stock firmware but also recall trying that from the Ugoos AM6. I have managed to get it to boot using u-boot-s905x2-s922. I have tried several of the DTB files starting with the g12b prefix. I had initial high hopes that the one for the Ugoos would work. And it did boot all the way into the desktop (I have auto-login enabled) but the mouse would not move nor would the keyboard respond. Since then I have tried many others - still working my way through them all one-by-one. And I have found some (gtking-pro.dtb, gsking-x.dtb) that appear to work pretty "normally" (not that I am sur…

hello I want to install the new version of armbian or alexelec on my m8s+ s812 2gb ram 8gb rom device, could you please share the imgs you have?

Many years ago, I fooled around and managed to get this old, Android TV box to boot/run Armbian from external SD card. As I recall, I followed Steelman's instructions. It appears to have kinetic (Unbuntu?) installed. I ended up not really using it and it went back into a box. Now I have a use for it. I want to run this software. And all of my apt commands fail in one way or another: bad repository (I changed to old-releases and that "helped"), then no release file (so I used insecure options on apt and that "helped" a bit but ultimately failed again), etc. So I guess I am being forced to upgrade. But all of the suggestions I have found to do this f…

So i've been using the build: "Armbian_community_24.8.0-trunk.6_Aml-s9xx-box_jammy_edge_6.8.10" and trying to burn it with balenaEtcher. The issue is that when ending to verify and configuring - inserting the sd card into a TX3 Mini (board is v1.6) goes into a bootloop. This does happen with all of my sd cards and flash drives, and no, its not that they're faulting, CoreELEC does flash and boot correctly in all of them. I also did the f3 test, and no issues were found. Something particular that I have found is that macOS does detect very easily the corruption and ejects the drive/card, while Windows just lets it pass "as intended" I'…

stuck on boot screen after software reboot... command sudo reboot on terminal Armbian_community_24.5.0-trunk.563_Aml-s9xx-box_bookworm_current_6.6.30.img.xz this does not happen on the desktop version Armbian_community_24.5.0-trunk.563_Aml-s9xx-box_bookworm_current_6.6.30_xfce_desktop.img.xz

Hi, I'm using the image Armbian_23.02.2_Aml-s9xx-box_bullseye_current_6.1.11.img on my Box TV Tigre 2 with Amlogic S905x processor and the dtb meson-gxl-s905x-p212.dtb and all the things I need are working, except the HDMI Audio output. Using the command "aplay -l" it shows no soundcards found but using the command lsmod | grep snd it shows different sound modules so I think it's a driver problem Also using armbian-config and going to system->hardware it shows an empty list. Any ideas on how to make it work?

hello i'm having a issue with my old tx9 pro s912 3g 34gb the problem is the wifi sometime will stop work and when i do a apt upgrade i have to replaced the dtb file because it get delete, i using a dtb file that a user post on github, i wonder if any of you have this issue, it cant be the wifi controller is dying, or my dtb file is wrong

Attempting Armbian install onto an S905. Hardware specs at https://specdevice.com/showspec.php?id=6653-4ac9-1101-570d0033c587 Kernel begins to boot but gets errors and never completes dropping into initramfs shell. Was able to capture the dtb blob from the Android kernel and decompiled it. Enough differences to the dtb files in the Armbian distribution that I cannot figure out how to create a dtb file that will work. Have looked for other files on the internet but haven't come across something similar yet. Booting gets stuck in a loop of: meson-gx-mmc d0072000.mmc: no support for card's volts mmc0: error -22 whilst initialisin…

Hi all, I have some x905 boxes and I'd like to use one (an old TX95 -> x905w IIRC) as a midi sequencer with fluidsynth. I found the hard way that the default kernel has no midi sequencer support (in kernel or module) so there's no way to use aconnect and have it as a midi box. The only solution seems to be rebuild the kernel with the added module support but it's been decades since last time i rebuilt a kernel and S905 kernels (with added balbes150 mods and stuff to have it working on those cheap boxes) seems a bit too complex for me. So the question is: is there a way to get a working kernel with midi support, and how to put it in. If this was…

I have an Amlogic S905X3 board with an Armbian image in it, there is a module chip of SP6330-X attached to it, I can connect wifi to it and it works properly but when I try to connect Bluetooth it doesn't detect Bluetooth but when i install android in the device it works perfectly. Can anyone help me out, Please?

Hi, I'm doing some tests on my BTVe10 Box TV. I tried the image "Armbian_23.02.2_Aml-s9xx-box_jammy_current_6.1.11.img" with the dtb "meson-g12a-sei510.dtb" and it booted but the wifi didn't work. I used the command iwconfig and got the error "no wireless extensions". How can I make the wifi work?

Hello, I'm new to this forum here. I don't know if it have solution to boot flashed USB (NOT SD-Card) contain Armbian OS from Recovery Mode on cheap Android TV Boxes (Set-top) ? Because I have this box with model `SB801` (Device name: Acnos SB801 [from Vietnam] ) doesn't have SD-Card slot but it has specs like Odroid C1 / MXQ / Mbox SB801. Little specs preview: + CPU: Amlogic S805 + RAM/ROM: 1GB/8GB + Running OS: Android 4.0 + USB Slot: 2 + Display connector: HDMI, [? Red,White,Yellow] + Network: Ethernet, Wi-Fi Thanks. **sorry for my bad English

Hello, I have android tv box with S912. On boot logo was GOOGLE TV and after android app. I put armbian on usb. I boot from usb with armbian by pressing reset button. I backup eMMC with ddbr and save this backup android img file on my computer. I put armbian on my android tv box. No logo, only messages. I don't know how armbian boot usualy, but I think it is same than usb. I think it works well (dual wifi ok, ethernet 100/1000 do not work, bluetooth I don't know). Before add anything, now I want backup eMMC again and save this backup armbian img file on my computer. I need boot from usb with armbian to do ddbr. But it is not possible …

Hi Guys, I was trying to install Armbian in a couple of boxes buit I had no luck. One is a SEI500W from SEI Robotics with AML 905X2 and the other is a Sagecom DIW 585 with AML 905X I followed the process and after trying to boot to recovery they start Andoid tv as normal (just takes more time). In the other hand I was able to run EMUELEC (Gaming emulator) on both devices with an image on SD so I'm assuming the problem is not a block. What do you think? Is there any ideas to try? Thank you in advance!

hello , it's possible upgrade armbian Linux vegas812 3.10.108 #5 SMP PREEMPT Sat Jan 13 10:50:53 MSK 2018 armv7l GNU/Linux if yes how to ? thank you

Hi everyone, I'm new in this forum. I'm trying to boot armbian on a Mecool KM1 tv box. It's an armlogic S905X3 with 4GB ram,, 32Gb storage. Cant find a viable uboot and dtb combination for it as the usb flashdrive or microSD card simply won't boot. I can, however, run coreelec with no issues. Does anybody had any success with this box? Thanks

Hello GUYS I want to install new firmware for my tv box but i can't find please help me about that. (Mxq pro 4k 5g (Amlogic meson8b))PLease help me. Because I am fed up . It slows down day by day.

Some months ago I bought a fake Tanix TX3 mini to use as my personal server, but when trying to install armbian I just realized that the real cpu its not a common s90w, as I would expect, but s905l2. Okay, after many tries and helps one a lot of peoples I discovered the right setup for my devide. Ophub armbian fork with 'Armbian_24.5.0_amlogic_s905w_jammy_6.1.84_server_2024.04.08' image with DTB 'meson-gxl-s905l2-ipbs9505' and u-boot-s905x-s912. That is the set up that I did some months ago, but now I bought a higher capacity sdcard (64gb) to store more files. Ok, the sdcard is working, I flashed this image, made the entire set up, but when I try to boot I alway…

There are 2 TV boxes. I put Armbian on both, on the x96 mini you can see 2 gigabytes of RAM, but on the m9s you can see only 1 gigabyte. Physically, both have 2 gigabytes of RAM. Please tell me what can be done? x96 mini(s905w): m9s pro(s905x):

Hello, I took out my old m8s (s812) 2go 8go, i put Armbian_21.11.0-trunk_Aml-s812_focal_current_5.14.0.img with meson8m2-m8s.dtb it stop at "starting hostname service " can you help ? thank you

I've this old tv box from a brazilian brand, called Intelbras IZY Play, the OEM appears to be SDMC, with the codename DV8038, it uses the s805x SoC. From what I've looked, it should be compatible using the files meson-gxl-s805x-p241.dtb u-boot-s905x-s912 The device does not have an SD card slot, so i'm trying to do it with a flash drive, however, after flashing it with balenaEtcher and doing the necessary changes to the files in my Windows PC, I cannot get it to boot, it justs enters a loop of showing the splash screen, turning off, showing the splash screen, and so on. I'm trying to turn it on pressing the hidden button …

Hello, I'm new to this forum. I would like to know which recent version of ARMBIAN I can install on my X96 Max+ TV box (2GB ram and 16GB version). I've tried to install several recent 24.5 versions but it won't start. Here is the link to the versions I tried to install(Armbian_community_24.5.0-trunk.250_Aml-s9xx-box) I simply renamed the file corresponding to my S905X3.............. box to u-boot.ext https://github.com/armbian/community/releases/tag/24.5.0-trunk.250 The only version I managed to install is Armbian_20.10_Arm-64_focal_current_5.9.0_desktop. So I'd like to know which version is best suited to my box. The CPU in the box is a…

Hello everyone, is there any way to boot from USB when my emmc is dead? this is my board

Hello, could someone give me a link (that is operational) to download an armbian (debian) image for the Neo x8-h plus. thank you

I can't boot into the armbian. It hangs at "waiting for a root file system", and repeats the line many times. Then says "Give up waiting for root file system device. Then, " Alert UUID=UUID-number-here does not exist, dropping to shell". It is armbian 24.5 image and dtb file is /dtb/amlogic/meson-sm1-sei610.dtb. I created the u-boot.ext from u-boot-s905x3 file. What I am missing? I tried to stop the autoboot, but it starts with 0 and doesn't even count. Here is the screenshot https://imgur.com/a/9dYm2B9

Right now I am using meson8b, I wanted to install armbian on my Android TV box but after some research and searching on Google I didn't find any of image file and their may not have any building guide. Please help me to do it so.

Hello dear forum! One question please ! A Leap s3+ can do AV1 On my Strong 4250+4150 I don't see any information about AV1 av01! But I tested it with AV1 codecs on the box with S905C1 and it works! Aida64 list the Codec ! So the S905C1 can do AV1, right? It works, but there is nothing about it in the information! Thank you dear forum Sorry for my Englisch - Google Translate https://www.androidtv-guide.com/streaming-gaming/av1-androidtv-players/ https://at.strong-eu.com/de/products/ip-tv-receivers-de/srt-4150-austria/

I was looking for a low-cost S905W tv box. I discovered this counterfeitby accident because I couldn't boot any armbian image for S905W soc and I accidentally tried the multitool and it started right away 1GB/8GB version and not 2GB/16GB. So be very careful what you buy and if possible send it back to these dishonest Chinese sellers!

Hello I have Armbian 23.11 installed to x96mini. I use it for HomeAssistant HA argues that cgroup version is incorrect and I have to switch it to version 1. There is a lot of advises about adding "systemd.unified_cgroup_hierarchy=false" to /boot/armbianEnv.txt or /boot/cmdline.txt or /etc/default/grub on the Intrnet But I have not these files in my system. I tried to create them but no results. Does anybody help me tu change cgroup version please )

Hi! Is it possible to install this assembly on Ugoos AM3 S912?

Hello i have a KM9 S905x2 and want to get linux on my box and keep havoing issues trying to boot into Armbian.

Hi, I have a probox2 S905X3 I tried to flash it a while back and it bricked, recently I got a serial adapter and attempted to get some data this is the output SM1:BL:511f6b:81ca2f;FEAT:A0F83180:20282000;POC:F;RCY:0;EMMC:800;NAND:82;SD?:20000;USB:8; LOOP:1;EMMC:0;READ:E;READ:800;READ:800;SD?:20000;USB:8; LOOP:2;EMMC:0;READ:E;READ:800;READ:800;SD?:20000;USB:8; LOOP:3;EMMC:0;READ:E;READ:800;READ:800;SD?:20000;USB:8; ..... As far as I can understand it looks like it is not booting and has some kind of read error, I tried to boot while holding down the reset btn w/wo usb/sd card, but I get the same result. Can I do anything?…

I have an OTT TV Box, model ABOX-A1 ( 1G + 8G, S905X ). It is running Armbian 23.11.1 bookworm. How can I have hardware video decoding? Hardware video decoding support seems present in the 6.1.63-current-meson64 kernel. It seems only the V4L2 M2M API is present. Some firmware seems missing. I was getting "meson-vdec c8820000.video-codec: Direct firmware load for meson/vdec/gxl_h264.bin failed with error -2" in dmesg. I don't know what package I need to install. I was thinking maybe firmware-linux-nonfree, but that conflicts with armbian-firmware due to firmware-ralink. The files are available at https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-fi…

Good morning, I'm trying to remove the Android layer from my T95N Mini MX+ and install ArmBian. Can you help me please? Thank you for your reply

Hello! So i am newbie on this subject, and i want to try Home Assistant and for that, i need to install ARMBian on an Android Box and i have no idea yet how to do it. First i would like to know which version of ARMBian should i install on a R-TV Box S10? That box has a Amlogic S912 socket 3Gb RAM and 32Gb ROM. Which firmware should i install to achieve my goal and how to do it? Thanks in advance for all the help.