Software, Applications, Userspace

I installed various version of Debian and Ubuntu Server (CLI) of armbian in orange pi 5, but there is no uart selection in armbian-config. I think this is os version problem. Could you can see the uart select in armbian-config? If so, can you tell me what I am missing? I tried apt upgrade and apt update and armbian-install, but these updates did not get me the uart port selection. Thank you for your reply

Hey there, I'm trying to use gstreamer as a video player for the tinkerboard 2 armbian build (Armbian Bookworm XFCE desktop stable). It seems that the VPU isn't used correctly, I only get about 20FPS for a 1080p mp4 video (h_264) and CPU flies to a 100%+. On the original and not so good orignal operating system (TinkerOS) there was an extra gstreamer sink plugin made for the RK3999 (rkimagesink). I tried to compile the original plugin from sources (https://github.com/TinkerBoard2/external-gstreamer-rockchip), but there are several dependencies missing and I can't find them either on github / apt. Any idea how to make gstreamer use th…

Finally there is a proper tor-browser available for arm64/aarch64: 1. Goto https://nightlies.tbb.torproject.org/nightly-builds/tor-browser-builds/ 2. Navigate into: tbb-nightly.<date>/nightly-linux-aarch64/ 3. Download tor-browser-linux-aarch64-tbb-nightly.<date>.tar.xz 4. Unpack with tar -Jxvf and run tor-browser/start-tor-browser.desktop Yay! (I'm sure you can compile it too from their github page)

Hi - just wondering if there's something anyone can do to seed more of Armbian community maintained images - especially Rockpro64 and Rpi5 images. There seems to be only one seeder and just as I was typing this post, I got to download over a gigabyte of the Rockpro64 image but it's still not finished. It seems the seeder (?) was online for a moment but then seeding stopped. So if there's something someone can do, much appreciated!

Hi, The package torsocks wasn't working and I could not understand why it was not. Torsocks configuration file: /etc/tor/torsocks.conf (default) specifies port 9050 # Default Tor address and port. By default, Tor will listen on localhost for # any SOCKS connection and relay the traffic on the Tor network. TorAddress 127.0.0.1 TorPort 9050 So port 9050 should be visible with netstat, but it was not: $ netstat -at tcp 0 0 127.0.0.53:domain 0.0.0.0:* LISTEN tcp 0 0 127.0.0.54:domain 0.0.0.0:* LISTEN $ Then I tried to enable tor.service, but got an error: …

Hi guys, i'm running transmission-daemon 3.00 on my orange pi 5 where there is installed Armbian based on ubuntu jammy. It works fine, but recently i've reached the number of 78 torrents that i'm downloading and seeding, i do not think it's an high number of files shared. Anyway after some hours that i start transmission-daemon i do not know the reason, it seems that is not downloading and seeding anything. I mean that the interface and the process are running and active but every torrent file it seems freezed. If i restart the process, everything start to work properly. I'm not an expert, if someone can tell me how to gather the logs i can share with you more inf…

Hi, I'm using Armbian 24.11.1 bookworm with a V6.6.62 64 bit Kernel on a NanoPi Neo2. To debug, I have a UART/Serial-to-USB connector attached. Other end is on a Windows 11 box where I use Putty. The setup works fine with one minor issue. During the print of the boot messages, suddenly the printed line width of lines with [ <status> ] is limited 70 columns. It starts shortly after the Welcome to Armbian 24.11.1 bookworm! message and a "…" character is used to shorten the lines. This part has normal line length: Welcome to Armbian 24.11.1 bookworm! [ 4.922261] systemd[1]: Hostname set to <nanopineo>. [ 5.6…

Hi all, Only just found out about Armbian. Looks really useful. Want to use an Orange Pi Zero 3 for Pihole with Unbound and Pivpn. However, i haven't found an answer for when you would use one distro over the other. Also which is what in the download listings? Thank you.

I have now been able to build server images for Raspberry Pi 5B and Radxa 5C, both having gpu hardware driver support. However, this only works with Ubuntu Noble as a distro base. I would also like to make Debian Bookworm images, but when I do, I never get any gpu hardware driver support. Why is that? What's so special about Ubuntu (which basically is Debian)?

I have noticed that when building images using the same kernel but selecting Ubuntu or Debian base (Bookworm vs Jammy), some hardware doesn't work on one of the images. Since the kernel is identical, why is not the hardware support the same? Is there a different build script for the two bases? Different userspace drivers? Just wondering..

Hello i use octoprint on my orange pi with armbian. Now i want to get multiple octoprint instances. so i use docker. i found many tutorials in the web The problem: i need to set udev rules for my usb connection of each 3d printer. I found many tutorials too. But my quesstion: can i detect the usb infos from the usb connection, when i use a usb port and connect the printer? Does udev_rules works with passive and active usb hub? Cause i would prefer to use a passive usb hub thank you

I constantly get this error message when I try to generate the version for rpi4. : Unable to correct problems, you have held broken packages. [💥] Error 1 occurred in main shell [ at /home/raspberry/build/lib/functions/logging/runners.sh:15 chroot_sdcard_apt_get_install() --> lib/functions/logging/runners.sh:15 pre_install_distribution_specific__add_rpi_packages() --> config/sources/families/bcm2711.conf:227 pre_install_distribution_specific() --> <extension_magic>:184 call_extension_method() --> lib/functions/general/extensions.sh:57 build_rootfs_and_image() --> lib/functions/main/rootfs-image.sh:19 full_build_packages_rootfs_and_i…

I'm trying to compile a java maven project and I've noticed that maven is unable to download dependencies from https repositories, I know that this problem is related specifically to https on armbian because I'm also unable to wget https repositories and it only works with the --no-check-certificate flag, I've tested on Ubuntu 22.04 on other two machines and it works, while on my armbian ones it doesn't, I've tested on my orangepi4 and on other 2 machines with x86 cpus that also runs armbian. There's a way to make https work by default on these cases? I don't know if I'm missing some configuration or something like that. I've attached a screenshot of what happen…

Have a nice day! I ran into an unexpected problem: once in a while, a message appears in the console: Broadcast message from gnome-initial-setup@stand83 on tty1 (Thu 2025-01-23 15:47:24 MSK): The system will suspend now! client_loop: send disconnect: Connection reset by peer armbianmonitor: https://paste.next.armbian.com/owanibodif What can I try?

Hello I use a ondroid c2 with armbian jammy. Sometimes it hangs/freeze (i don't know what happends correctly....) I can't connect it via ssh. And if i connect it on hdmi port, i don't get any screen..... So i read the syslogs and journalctl..... Mostly i can`t see what happens. but today i see it and im wondering why some service try to run.... I had install motioneye and vncserver, but i tried to uninstall this for a long time...... today in the logs is a red line, that the services tried to run. how can i remove this fully????? Is it possible, that this error messages are the reason for the free…

I am using armbian minimal and le potato. In tty the screen has a black bar of unusable space and cuts off about 1.5 lines at the bottom. I managed to install sway and sddm with the use of clearing the terminal. In sddm the top and probably the other sides of the screen gets cut off, It cuts off like half of the text at the top. In sway it has a blue bar at the top and cuts off the bottom like it does in tty. I don't really care about fixing sddm but I want to fix sway and tty. I have looked at sway's output command and setting the pos configuration does not do anything. I have also looked into changing the boot.cmd file to remove the overscan "100" thing but that still d…

First, thanks to you guys for the great work you are doing for armbian! I am quite impressed and very happy to be able to run my odroid devices (c2, m1) on the latest kernel with zfs and lxd! What I'm wondering: since there is no such thing as do-release-upgrade in armbian: What are your best practices for upgrades to avoid being forced to always install and configure everything from scratch? Since I run most everything in lxd containers and use zfs on a separate disk, upgrading is as simple as installing/compiling zfs and lxd and restoring the lxd databases, but maybe there is a better approach besides reinstalling and compiling packages?

hi, i upgrade my bullseye install to bookworm. Upgrade is ok. I Have this message on connection : Welcome to Armbian 24.8.0-trunk.122 Bullseye with Linux 6.9.3-edge-rockchip64 No end-user support: untested automated build &amp; unsupported (bullseye) userspace! /etc/apt/sources.list: deb http://deb.debian.org/debian bookworm main contrib non-free non-free-firmware #deb-src http://deb.debian.org/debian bookworm main contrib non-free non-free-firmware deb http://deb.debian.org/debian bookworm-updates main contrib non-free non-free-firmware #deb-src http://deb.debian.org/debian bookworm-updates main contrib non-free non-free-firmware deb …

Disclaimer: I know it's not a good idea XD Is it possible somehow to upgrade the prebuilt image Armbian 12/OpenMediaVault 7 to Armbian 13/OpenMediaVault 8? Is there a guide?

After updating linux-image-current-meson64 24.11.1 (linux-6.6.63 kernel) to 25.2.3 (linux-6.12.19 kernel) - USB stopped working. Linux odroidhc4 6.6.63-current-meson64: $ sudo lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 058f:6387 Alcor Micro Corp. Flash Drive Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Linux odroidhc4 6.12.19-current-meson64: $ sudo lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Linux odroidhc4 6.6.63-current-meson64: $ sudo grep -i usb /var/log/sys…

Hello people! I'm wondering how I can use Armbian with a webserver? Is it possible?

There is several gigabytes of eMMC memory prepasted on the bpi-m5 that I would like to train amanda's database to use as its a heck of a lot faster & longer lasting than the 128G u-sd it is booting from. What is the procedure to mount it and make it usable as r/w memory?

Hi. Im sorry, if the question below has been already discussed and published somewhere, but i didnt find proper information. So, what i have: orangepi5max, https://github.com/armbian/build.git this armbian, https://github.com/rockchip-linux/kernel.git and this kernel, which is placed in armbian-build/kernel. I've tried to use "userpatches/linux-$LINUXFAMILY-$BRANCH.config" config from armbian manual, to specify path to kernel, but despite the fact that manual states, that my custom config should replace the default one, ./compile.sh ignores it. So what am i doing wrong and is it even possible nowadays to assebmle the image using local kernel or it is already restricted?

Hello, I have a problem compiling the TBS driver. mkdir tbsdriver cd tbsdriver git clone https://github.com/tbsdtv/media_build.git git clone --depth=1 https://github.com/tbsdtv/linux_media.git -b latest ./media cd media_build make dir DIR=../media make alliesconfig make -j4 sudo make install" Indeed under Armbian (Linux rock-5b 5.10.72-rockchip-rk3588), warnings during compilation are blocking, unlike the Ubuntu system (where everything passes). /home/marc/Prog/tbsdriver/media_build/v4l/av201x.c:232:22: warning: unused variable 'priv' [-Wunused-variable] error, forbidden warning:av201x.c:232 232 | struct av201x_…

I have a Logitech C920 webcam I am trying to use on my Radxa Zero. I'm running Armbian 23.11.1 Bookworm 6.1.63 64-bit. When I run v4l2-ctl -i /dev/video1 --list-formats to query the webcam, it errors out. VIDIOC_S_INPUT: failed: Inappropriate ioctl for device ioctl: VIDIOC_ENUM_FMT Type: Video Capture Multiplanar [0]: 'NM12' (Y/UV 4:2:0 (N-C)) It seems anything relying on v4l2 is also failing to work. Anyone have ideas of what the issue may be? Thanks! ---------------------- FYI...If I use this webcam on a RaspberryPi 4 running Bookworm, it produces the following output a…

Hi, I am working on a Armbian image of Jammy with kernel version 5.15.25-flippy with ARMv8 Processor rev 4 (v8I). The video quality of the device is not good and its getting stuck in between and lagging. Can any one suggest me a way out of these please? Thanks Regards, Ajay

I recently installed the latest Armbian Ubuntu 24.04 Desktop on an OrangePi Zero 2W and I have tried to follow many tutorials from various sites, but I cannot get a VNC server to work. Can somebody help me? Armbian image: Armbian_community_25.5.0-trunk.87_Orangepizero2w_noble_current_6.6.72_gnome_desktop.img

Hey, I've had issues using Wireguard in Armbian. I worked out a method to install but on reinstalls this method has run into problems. I've since developed a new method but am getting a strange error as below. Can anyone interpret this and tell me if it's likely to be problematic and if so is there a way forward? I've searched the Wireguard repository and there doesn't seem to be an arch specific buildset. TIA The /var/lib/dkms/wireguard/1.0.20210219/6.1.11-rockchip64/aarch64/dkms.conf for module wireguard includes a BUILD_EXCLUSIVE directive which does not match this kernel/arch. This indicates that it should not be built. Skipped.

What are some useful, fun, etc applications to have on a little 2GB Libre computer board? I just used my computer for website stuff and I feel like finding something other then development.

I am trying to connect to my armbian install (on an orange pi 4 LTS) from OSX (with Xquartz) to run the mythtv backend setup. I didn't install the desktop version of armbian; just the base version, and with the image for this model of pi. connecting by SSH is not a problem, I happily get through. The problem is, both with the -X and -Y options, I can't forward X successfully. DISPLAY doesn't get passed. On the Mac side, it's variously ":0" or something like "/private/tmp/com.apple.launchd.Cvf3IlZ6rM/org.xquartz:0" (which would have no meaning to another machine). I've set to :0 , :0.0 , mymac.local:0 (after enterin…

I installed Waydroid on an Amlogic Meson GXM (S912) TV box. The SOC has a Mali-T820 GPU, and the box has 2 GB of RAM and 16 GB of eMMC. This was easy to do and Waydroid worked, but it was very slow, even before it heated the SOC to 80°C, which is probably its throttling limit. I removed Waydroid because it was too slow. I wasn't trying anything demanding. Even navigating Android Settings was ridiculously slow. This is a bit surprising because the hardware was designed for running Android. I was not running much else, just Wayfire and one or two Alacritty consoles. I don't think I was running out of memory. Is it possible to get decent Waydroid performance on o…

hi, What is the meaning of “UBOOT_TARGET-MAP=” in Armbian？ What is its function？ What does it do? Can you explain? help,help…

Hello guys, I never used armbian or any other kind of mini ARM Linux distro. I'm thinking about buying one of these ARM boards for a wireless access point and light server. What kind of packages can be installed on armbian? Can apache, BIND, ansible, python3, DHCP server, for example, be installed on it? Are there any packages repositories? Possible to use a more powerful wifi antenna on them or is a USB antenna needed? Many thanks for any pointers on this.

Hello Armbian community I am a bit confused - I only see images labeled for Raspberry Pi 4 in the Raspberry Pi section of the Armbian website. However, I have seen several videos (like the demo by NicoD) showing Armbian Jammy with KDE Neon running smoothly on Raspberry Pi 5. Are the images for Pi 5B hidden or moved? I am looking for a direct link to download the Pi 5B images (Jammy or Bookworm, desktop or minimal version), instead of having to guess if a "Pi 4" image actually supports the Pi 5. Thank you for your help!

Hey, Where can I find the latest images for the Odroid HC1 and ZeroPi? https://www.armbian.com/odroid-xu4/ https://www.armbian.com/zero-pi/ I understand that both SBCs are quite old and probably long forgotten by Armbian users, but I need a clean install on both and am looking for the latest existing images. I tried looking at https://armbian.lv.auroradev.org/archive, but it seems not everything is there. Thanks in advance for any help. PS Anyone still using these SBCs? Are there any alternatives in 2026 at reasonable prices?

Hello, I am attempting to set my armbian machine up to match my Arch install on my Intel box. I like to use en-us. Utf8 with the 'US intl with dead keys' variant. But I cannot find it. Im currently using the intl variant but that requires the use of altgr. And doesn't work with my keyboard or me. Is there something I need to install to get the 'with dead keys' variant which does not Require the use of altgr?

I'm having trouble understanding armbian-install, is this a good place to discuss? Basically, I'd like to understand the menu options better. Probably because it's a generic tool for all devices, the selections aren't clear (to me at least), depending on what device I'm working with. For the most part, all I ever need to do is to copy the working SD image to the eMMC or NVME. Any armbian-install gurus lurking?

Hello, I have a Medion Chromebook S2015 with a CPU (armv7 processor rev 1 (v7l)) and RAM (2062808 kB). So it's 32-bit. I want to install Linux on it. To do this, I need an armhf architecture. However, under armhf on ARMBIAN, I find (Inovato Quadra, Khadas Edge 2, Khadas VIM4, Mekotronics R58 4X4, Mekotronics R58 HD, Muse Pi Pro, NanoPC T6 LTS, NanoPi M5, Nanopi M6, Nanopi R3S / LTS, NanoPi R76S, Radxa Rock 5B Plus, Radxa Rock 5C and Radxa Rock 5T). What should I select? Are there still 32-bit versions available?

Sorry for a n00b questions but I'm confused with Armbian version names 😀 1) I'm using an ARMhf board with a Jammy 6.6. I see ports.ubuntu.com in Apt log. But on which kernel is it based? On the Ubuntu website, I don't see a 6.6 kernel at all. Or is it a kernel from https://www.kernel.org? In armbian-config I see 6.1, 6.6, and 6.7 versions available for download, but all of them are also not listed on Ubuntu's website. Which is the most stable and recommended Armbian version to use? 2) Which version is the next after Jammy? Noble? On the Ubuntu website, I see v24.04, on the Armbian website I see v24.5. Why Armbian version is newer than …

Need a VPN for multiplayer gaming server, need guidance which would work best for me

I want to clone my SBC's SD card onto another card, but I don't have a computer running Linux as the primary OS. Out of the Windows utilities out there which ones will take a exact image of the SD card and then write that exact same image to another card making it a perfect clone of the source?

I use my Banana Pi with pihole. There I see different IF-IDs. 1) What are IF-IDs? I assume Interface IDs. On my Laptop I don't see that. There are only IFs. 2) The speed of IF-ID-1 and -3 are 10000 Mbps. My Banana Pi M1 has only 100 Mbps. What is the sense of this? 3) The WAN IP of IF-ID-3 shows with whois that this is a Backbone of Vodafone. How could this be, that I see this? inxi -i Network: Device-1: sun7i-a20-gmac driver: sun7i_dwmac IF: eth0 state: up speed: 100 Mbps duplex: full mac: 02:cd:02:41:f1:17 IP v4: 192.168.178.5/24 type: dynamic noprefixroute scope: global IP v6: fe80::a8fc:3ac5:236d:9a…

I have Armbian running on an Orange Pi and I like to work by changing to su so I'm not having to constantly type sudo in front of commands when I have a lot of commands that need root privilege. However, bizzarely, sometimes I still ahve to use sudo. So for example: root@orangepi5-plus:/home/Data/Mercurial_Info# usermod -a -G www-data username bash: usermod: command not found If I do sudo usermod -a -G www-data username How can I fix this please? It's also stopping me running a script I need that I ran on my old Banana Pi running Armbian.

I have an IoT project that uses an SPI LCD (480x320), showing 1 full screen application on top of X11, which starts automatically, almost in kiosk mode. Is it worth a lot trying to switch to Wayland? I have 2 roadblocks, which I am trying to drill through: * tkinter app re-write in pyqt * starting from a minimal armbian image, and install the bare minimum to have wayland and start the app Solid advantage: * Future proofing the product I have these preconceived advantages: * less resources needed: my application is fine with an OrangePi Zero 3 with 1 GB RAM, I don't want to upgrade RAM * faster startup (now I nee…

Does anyone know how to get WireGuard running on an odroid xu4 with armbian debian bookworm? I have tried installing the generic kernel headers in armbian-config but it is not good enough. I believe that I need "linux-headers-5.4.243-odroidxu4" but it is unavailable in the preinstalled repositories.

Hi, just to be clear I've zero doubt the problem is me but this is a recurring issue and I've been unable to nut it out on my own. I've found (both with bullseye and bookworm) that installing Wireguard borks my system - ie I am unable to boot after install. I'm running headless and therefore am limited diagnostically (I can't say what errors are occurring when attempting to reboot) I realise this'll make my problem frustrating for a lot of folks to engage with but any ideas at all'd be helpful. When first using Armbian a few years back it seemed as though the issue was that the LTS kernel did not include wireguard support and I discover…

For many Years I was using a wlan SSID containing a backslash with no problems. While trying the current Armbian_community_26.11.0-trunk.62_Bananapim2plus_trixie_current_6.18.54_minimal.img.xz the network wlan0 would not connect. Connecting to the guest wlan of the same router worked. I could trace it to the backslash in the SSID which "netplan try" complained about. Escaping that with a additional backslash made "netplan try" accept it, but the connection did not work, the interface wlan0 remained in status "state DOWN". Changing the SSID (removing that single backslash) made it working. I did not find something that prohibits the backslash use…

I'm trying to install KiCad on my OrangePi 5 running the latest stable Armbian 23.02 Jammy / Gnome. apt install KiCad installs a minimal KiCad 6 that will launch but it has no libraries, or other "extras" . Kicad wIthout the symbol and footprint libraries it is not very useful. apt install Kicad-Library returns E: Unable to locate package kicad-library I tried several other possible variations: E: Unable to locate package kicad-library-symbols dpkgl --list has --> ii kicad 6.0.2+dfsg-1 arm64 Electronic schematic and PCB de…

Hello, Has someone managed to make widevine work properly in armbian for any ARM64 board? I have a orange pi 5 plus board and I'm using armbian with the vendor kernel and I'm struggling to get widevine working without success. I've tried several online tutorials but none of them seem to work (but they also seem to be rather old).

Has anyone able to install WPS Office on debian / ubuntu images? It's compatibilty with Microsoft Office is extremely high & is also available on Android. OrangePi has provided deb packages for ARM, anyone tried it? In there above GDrive link go to WPS folder

The last upgrade off armbian on my Bananapi M1 went wrong and end with a checksum error: # apt upgrade The following packages will be upgraded: armbian-firmware 1 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. Need to get 91.6 MB of archives. After this operation, 92.2 kB of additional disk space will be used. Do you want to continue? [Y/n] y Get:1 http://netcup.armbian.com/apt bookworm/main armhf armbian-firmware all 25.2.1 [91.6 MB] Ign:1 http://netcup.armbian.com/apt bookworm/main armhf armbian-firmware all 25.2.1 Err:1 http://apt.armbian.com bookworm/main armhf armbian-firmware all 25.2.1 File has unexpected …

When using X11VNC in SBC without a connected display, everything works well on some assemblies and the screen resolution is 1024 x 768. But I could change that in xorg.conf. But now, either in kernel 6.x.x, or in bookworm, I have a 720x576 composite video output resolution, since HDMI is not connected. And there is no way I can change the resolution and make sure that the composite video output is not used. HELP me

Running latest Armbian 23.02 Jammy XFCE on my Orange Pi 3 LTS. I need to change the color depth for Sky Chart which needs 16 or 24 bit. When I try to open the Display Setting I get the following pop up: Unable to open the Xfce Display Settings. Unable to query the version of the RandR extension being used. What's wrong and how do I fix it ? Thanks.

When trying to upgrade my system yesterday, on bookworm, i saw: # apt full-upgrade Reading package lists... Done Building dependency tree... Done Reading state information... Done Calculating upgrade... Done The following packages have been kept back: libnvpair3linux libuutil3linux zfs-dkms zfsutils-linux 0 upgraded, 0 newly installed, 0 to remove and 4 not upgraded. See that zfsutils-linux depends on libc6 >= 2.38 : # apt show zfsutils-linux Package: zfsutils-linux Version: 2.4.1-1 Priority: optional Section: contrib/admin Source: zfs-linux Maintainer: Debian ZFS on Linux maintainers <pkg-zfsonlinux-devel@alioth-lists.debian.net> Ins…

ZFS-DKMS doesn't work on vanilla image https://dl.armbian.com/longanpi-3h/Bookworm_current_minimal Image is freshly burnt to the SD card. root@longanpi-3h:~# apt update root@longanpi-3h:~# apt install zfs-dkms root@longanpi-3h:~# modprobe zfs modprobe: ERROR: could not insert 'zfs': Exec format error root@longanpi-3h:~# modinfo zfs | grep -v parm filename: /lib/modules/6.12.23-current-sunxi64/updates/dkms/zfs.ko version: 2.3.1-1~bpo12+1 license: CDDL license: Dual BSD/GPL license: Dual MIT/GPL author: OpenZFS description: ZFS alias: zzstd alias: zcommon alias: zunicode alias: znvpair a…

I run Armbian Trixie in my NAS, and I saw last week that the ZFS 2.4.0 was available here: https://apt.armbian.com/pool/trixie-utils/z/zfs-linux/(it will go to one of the mirrors). The problem is the package `zfs-zed` isn't available, so I got serious problems during the update (I run Openmediavault, btw). Any tips if it's a mistake and the package should be included, or `zfs-zed` is deprecated and I need to talk with OMV team to remove this dependency?

Hello everyone, I'm currently working on a custom firmware project for the Allwinner V851S/V851SS SoC (e.g., dash cam or smart camera). I've reached the stage where I need to modify and re-sign the firmware images (TOC0/TOC1) for use with tools like PhoenixCard. Unfortunately, the tools found on GitHub (e.g., dragonsecboot, pack_tools, boot0, etc.) are often incomplete or fail to build due to missing references (e.g., rsa_sign_main, GetFullPath, etc.). 🔍 I'm looking for a complete and working version of the following tools: dragonsecboot pack boot0 sunxi_tools Full config files such as dragon_toc.cfg, sys_config.fex Working pac…