Beginners

Hi, will there be an Upgrade Path to DEBIAN 9 of existing ARMBIAN installations or just apt-get dist-upgrade ? Regards, Ireng

i just saw the new netinstall for raspbian - works like a charm and can be configured to produce a customized version. very small file to write to sd. could something similar be done for armbian? thanks a lot! andrew

Armbian 5.15.26-sunxi64 kernel breaks GPIO on NanoPi NEO2 Armbian 5.15.26-sunxi64 (bullseye) NanoHatOLED fails: - GPIO devices are missing; - /proc/cpuinfo lacks Processor, Hardware info. root@nanopineo2:~# uname -a Linux nanopineo2 5.15.26-sunxi64 #trunk.0002 SMP Thu Mar 3 10:24:53 UTC 2022 aarch64 GNU/Linux root@nanopineo2:~# gpio readall piBoardRev: Unable to determine board revision from /proc/cpuinfo -> Is not NanoPi based board. -> You may want to check: -> http://www.lemaker.org/ root@nanopineo2:~# cat /tmp/nanohat-oled.log open of gpio 0 returned -1: No such file or directory error opening gpio sys…

Hello everyone, I have a nanopi r2s running the latest minimal focal image, and I'm having trouble with the network configuration. Context: I have an intranet connected to the LAN port (lan0), and my home network connected to the WAN port (eth0). The intranet does not connect to the internet, and both networks have functional DHCP servers on different IP ranges. For some reason the system thinks it should try to access the internet via my intranet, which is definitely not going to work. Suppose the intranet is 10.0.0.0/24, how can I tell the system to use this interface if and only if I'm accessing addresses that falls under this address …

Hello! I bought an Orange Pi PC about two years ago which is still working perfectly to this day (very happy with it), but I am curious to know what would be considered the 'best' Single Board Computer at this time point time, which would be around the same price range ($15 USD). 'Best' being defined as having a decent processor, and good software support - which the Orange Pi PC eventually did. I'm tempted to just buy another one of these for another project, but interested to know. Again, the main factor is price - $15 USD or less would be ideal.

Hey guys, I am pretty new to this. I am working on turning my Le Potato into a TV shuffler. I have decided to go with Armbian, since I can't SSH (which is required for the CoreElec method), because I use college internet, and it just isn't configured properly. I am currently trying to get a script going that will open a folder and begin randomly playing videos from within, but I cannot figure out where to start really. I think I need to import mpv into the script somehow, but I honestly cannot find any resources on how to do this. Any help is appreciated, thanks in advance.

hello i have problem with installation hostapd on jessie udoo ( Linux udoo 4.2.3-udoo #1 SMP Sun Oct 11 21:56:52 CEST 2015 armv7l GNU/Linux ) i should enable mode ip_tables_nat but its require recompile kernel (as i think because its not in modules list <= modprobe iptable_nat says 'module ... not found'), is there other easier way? or can someone post new version of kerne img thank you

Anyone have success with GStreamer and Xenial Desktop? Once upon a time (mid 2015) gstreamer used to work like this: gst-launch-1.0 filesrc location=vid.mp4 ! qtdemux ! vaapidecode ! vaapisink Time has passed and the many parts that make up GStreamer (libva libcedrus vdpau-sunxi libvdpau gstreamer and gstreamer-vaapi) have evolved. I revisited this because I have recently stumbled upon an invocation that let's me play videos with hardware acceleration in gstreamer. I'm trying to stream h264 vid from my rpi-zero's camera to be saved/played/restreamed from my BPi ( i have both BananaPi and OrangePi+2e). This wor…

Hello, I'm trying to find out how to use a 1.5 Inch RGB OLED Display that uses the SSD1351 IC on a NanoPi M4 however I don't seem to be able to turn on the SPI. I used armbian-config to enable the gpio overlay: [ ] dwc3-0-host [ ] i2c7 [ ] i2c8 [*] pcie-gen2 [ ] rk3328-opp-1.4ghz [ ] rk3328-opp-1.5ghz [ ] rk3399-opp-2ghz [ ] spi-jedec-nor [*] spi-spidev [ ] uart4 [ ] w1-gpio And the SPI isn't showing up on /dev: ls /dev/spi* ls: cannot access '/dev/spi*': No such file or directory Wasn't this enough to be able to use the SPI1 on this board? SBC: NanoPi M4V2 System: 5.10.35-rockchip64 #21.05.1…

Hello! First post so apologies for any naivete. I have a USB wifi adapter connected to my la frite (it was the only distro that supported it out the box so thank you). On each boot it seems like the USB is getting a different device address and therefore I have to open nmtui and connect to my wifi all over again, to the point where I have 10+ stored connections to the same wifi in my network managers saved connections. At first I thought I could solve the problem by reversing the Persistent Interface Names settings on boot so that it would be wlan0 and I could automate the connection on startup but that hasn't worked for me either. I've run out of ideas a…

I've tried the EDIMax (EW-7811u) on my Orange Pi Zero. I was wondering if there is a another adapter I should be looking at or is there a working driver for the RTL8188CUS? Below is what lsusb gave me for this device. Bus 002 Device 002: ID 7392:7811 Edimax Technology Co., Ltd EW-7811Un 802.11n Wireless Adapter [Realtek RTL8188CUS] Uname Info is as follows: Linux OrangePI 3.4.39 #2 SMP PREEMPT Mon Nov 21 16:23:11 CST 2016 armv7l GNU/Linux Uname Info is as follows: Linux orangepizero 3.4.113-sun8i #16 SMP PREEMPT Tue Jun 13 14:15:57 CEST 2017 armv7l armv7l armv7l GNU/Linux ifconfig -a info: eth0 Link encap:…

I am having trouble installing Armbian on the NVMe drive Orange Pi 5 plus. I tried sudo armbian-install But it will never list the nvme drive there. lsblk clearly can see the drive as is seen in the image bellow? Does anyone have any idea how I am supposed to do this. Thanks

hi All, I'm new on this forum, very great work all OMV project! I have a banana router, also called LamoboR1, an ARM powered very powerfull router, I can install Wheezy or Jessy (I think Jessie would be better) an other this install OMV on wheezy I havent 'got any problem I instal OMV Stoneburner and after I upgrade via omv-release-upgrade to Erasmus ( little question does Ownlcoud run on Erasmus, can't find it in omv extras repo ? ). When I try to install OMV from Jessie I get this error The following packages have unmet dependencies: openmediavault : Depends: php5-pam but it is not going to be installed Depends: proftpd-mod-vroot but it is not going to …

This is the image i downloaded from freepbx https://www.freepbx.org/downloads/ you could view all versions to check the iso images available. so this image contains freepbx with asterisk. i want to install this image on my nanopi neo core but i am afraid if it wont work. for more information about this operating system at my pc : command: cat /etc/os-release output: NAME="Sangoma Linux" VERSION="7 (Core)" ID="sangoma" ID_LIKE="centos rhel fedora" VERSION_ID="7" PRETTY_NAME="Sangoma Linux 7 (Core)" ANSI_COLOR="0;31" CPE_NAME="cpe:/o:sangoma:sng:7::server:utf8" HOME_URL="https://distro.sangoma.net…

is there any plan for a fix? also i tried usb wifi but this one is constantly dropping .... [ 955.206493] usb 1-1: new high-speed USB device number 4 using ehci-platform [ 955.252439] i2c i2c-0: mv64xxx_i2c_fsm: Ctlr Error -- state: 0x2, status: 0x0, addr: 0x34, flags: 0x0 [ 955.368151] usb 1-1: New USB device found, idVendor=0bda, idProduct=8176, bcdDevice= 2.00 [ 955.368168] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 955.368174] usb 1-1: Product: 802.11n WLAN Adapter [ 955.368180] usb 1-1: Manufacturer: Realtek [ 955.368188] usb 1-1: SerialNumber: 00e04c000001 [ 955.373535] rtl8192cu: Chip version 0…

I tried to make possible to use hardware decoding on my Beelink tvbox with Armbian-20.10 with Ubuntu Bionic version (with kernel 5.9.0) compiled by @balbes150 but this error message occur: root@arm-64:~# vainfo libva info: VA-API version 1.1.0 libva info: va_getDriverName() returns -1 libva info: User requested driver 'vdpau' libva info: Trying to open /usr/lib/aarch64-linux-gnu/dri/vdpau_drv_video.so libva info: Found init function __vaDriverInit_1_0 Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory libva error: /usr/lib/aarch64-linux-gnu/dri/vdpau_drv_video.so init failed libva info: va_openDriver() returns -…

Hey, guys, I just upgraded my OrangePi Zero. Everything seems to be working, but I'm disturbed by incorrect information on the home page: v25.2.3 for Orange Pi Zero running Armbian Linux 6.12.20-current-sunxi Packages: Debian end of life (buster), possible distro upgrade (bookworm) Support: DIY (community maintained) Please advise me how to make Armbian correctly display the installed version. Thank you.

i intend use orange pi one ,only for download all night , but i instal armbian ,and not come download manager ,i need one same as jdownloader to download automated from host sites big games in many parts ,i need sugestions

Hi. I have installed the Armbian Jammy version for the Pinebook Pro and right after installation without any changes I get this error when I want to upgrade. Any idea how to fix this? mmw@pinebook-pro:~$ sudo apt-get update [sudo] password for mmw: Get:1 http://ports.ubuntu.com jammy InRelease [270 kB] Hit:2 https://ppa.launchpadcontent.net/oibaf/graphics-drivers/ubuntu hirsute InRelease Hit:3 http://ports.ubuntu.com jammy-security InRelease Hit:4 http://ports.ubuntu.com jammy-updates InRelease …

I'm putting this here because I'm not sure where else - mods please forgive me if wrong. The instructions say # download public key from the database gpg --keyserver ha.pool.sks-keyservers.net --recv-key DF00FAF1C577104B50BF1D0093D6889F9F0E78D5 but sks-keyservers have apparently closed. I found 3 alternatives: pgp.mit.edu - searching with fingerprint doesn't work. "igor.pecovnik@gmail.com" does. Good key, couple of other sigs on it. Can we update the Armbian website to this? Index apt-Armbian, mirrors (e.g. I am probably not naming it right) - I only found these sites (index pages, really), when I clicked on a DDG search res…

I am looking to build a stable applicance that is updateable on demand / over-the-air in an atomic way. Ideally, it uses a dual-partition setup, where the is an active rootfs and an inactive one. On update, a new rootfs is streamed directly to the inactive partition, the device reboots to the new rootfs and - if everything runs according to plan - the new rootfs is committed as the new active one. If the reboot fails, the device reverts to the previous (still active) rootfs. This functionality is very common with embedded devices, many using the Yocto project. I'd like to try to use Armbian, however, building the image from source with my own userpatches and i…

Hi, I just ordered a NEO2 that I intent to use as a Tvheadend backed. Actually will use two at different locations, the problem is with the kernel bug affecting the DVBSky S960 DVB-S2 USB tuner since a kernel commit in 4.10rc1 Luckily, this has been fixed recently, and there is a patch as well. The patch has been submitted for upstream devs LINK And LibreElec also included the patch and will be fixed (finally) in their next beta LINK I wanted to ask if it is possible to include this patch to Armbian kernel (maybe a beta or nightly) in order to make DVBSky S960 work? Many thanks!

First things first. I am enjoying armbian so thanks all for it and well first post as well so Hi and stuff. Ok I likely dont know what I am talking about and I have been able to verify SMP working but something is bothering me. On every multicore system I have ever used I always see the cores split out into separate processors in cpuinfo like this: processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 42 model name : Intel(R) Core(TM) i5-2540M CPU @ 2.60GHz stepping : 7 microcode : 0x29 cpu MHz : 894.257 cache size : 3072 KB physical id : 0 siblings : 4 core id : 0 cpu cores : 2 apicid : 0 initial apicid : 0 fpu : yes fpu_exception : yes cpuid level :…

Hey guys so i'm trying to setup docker-compose with version 3.7, the problem is it seems it doesnt like version 3 at all! docker compose file: i have the ports set up, here appears as XXXX but i have 9000:9000 on the compose file Spoiler version : "3.7" services: portainer: image: portainer/portainer container_name: portainer restart: always command: -H unix:///var/run/docker.sock ports: - "XXXX:9000" volumes: - /var/run/docker.sock:/var/run/docker.sock - ${USERDIR}/docker/portainer/data:/data - ${USERDIR}/docker/shared:/shared environment: - TZ=${TZ} docker-compose --ve…

Hello, I am planning to desgin a Computer-on-Board, but would like to know what are the minimal specs needed for it to run a graphical user interface with a desktop. Doing a simple Google Search gives me two answers: "512 MB RAM memory, at least 8 GB of storage (on a quality SD card or eMMC), a 4-core processor, and wired networking. For a more advanced Armbian build framework, you'll require a system with at least 8GB of RAM and 50GB of disk space, although specific requirements vary depending on the hardware." My main issue with this is that it doesn't explain directly if 512 MB of RAM and a 4-core processor (and what frequency?) are enough for the most ligh…

Hi all, I have a working Pinebook Pro Focal build with LUKS encryption enabled. The only issue I have is that when booting no progress or password prompt is displayed. As soon as I enter the password and hit enter I see the boot logo or console output depending on what is set in armbianEnv.txt. I will be continuing my research and learning about the boot process in general but wanted to check in here to see if people had any obvious pointers to share or whether maybe this is a known limitation that is going to be hard to resolve. Thanks, Matt

If I am using SSH over a WIFI connection and then plug in the ethernet cable, then I lose my SSH connection. Simply disconnecting the cable doesn't resolve the issue; I need to reboot without the ethernet cable connected to reestablish the SSH over WIFI. The system diagnosis is here.

I live in Thailand and the default Google search goes to the Thai servers. Thai language is displaying as just boxes in the web browser. How can I install Thai fonts so web pages display correctly that have Thai characters in them? Thanks in advance for helping.

help with the connection orange pi pc

I followed instruction of adding overlay at http://linux-sunxi.org/1-Wire This resulted in an error during boot and non functional 1-wire: Removing "#" comments from armbianEnv.txt resolved the issue Can you please confirm if comments are allowed in armbianEnv.txt? Thanks

Hello to all, after plug a CDC device (Honeywell 1900 USB scanner), only one USB port on orange pi pc board works, I use 10 orange pi boards, the problem is only present int two of this boards. I notice that when I plug the CDC device alone the other ports not to work, but when I connect the CDC with another devices (mouse, keyboards) the problem is not present. I reinstall the img and the problem persists. The two USB ports not to work anymore. I think that is a hardware problem because the 5V in the two USB ports are not present, and the plugged devices not to work! I use Armbian_5.83_Orangepipc_Ubuntu_xenial_default_3.4.113_desktop.img …

I I'm getting a 502 Bad gateway when I'm trying to run apt update on the http://apt.armbian.com/dists/noble/InRelease repository. I checked the forum and didn't see a server maintenance notice. And the arbianmonitor seems to fail to post the report too. Is there an infrastructure problem?

Hi, I noticed I have several /sbin/agetty threads running on my BananaPi. I don't need serial console so my question is how to disable it? I am using Bananian.

Hello. I want to autostart Jivelite. I can do this with /root/jivelite/bin/jivelite But I want this start on power on. How to do this?

Xupdate: includes updated mesa libraries for mali GPUs. how to use: add below to you source.list gpg key can be found at: after that, run `sudo apt update && sudo apt upgrade` before reboot, please update your xorg.conf, follow below webpage:

Greetings Docs say Yet I need to use Ubuntu 18.04 to compile. I'm not understanding - - - - Ubuntu 18.04 isn't Debian testing (11 or bullseye), it isn't Debian stable (10 or buster) - - - - so why do the docs say I can compile on Debian?

Hi all, I created a patch that applies to the mainline kernel v.14-rc6 to enable 32/24bits audio captures for H2+/H3 SoC. Just wanted to share this with the community. Kind regards, Andrea --- a/sound/soc/sunxi/sun4i-codec.c +++ b/sound/soc/sunxi/sun4i-codec.c @@ -346,11 +346,6 @@ 0x3 << 8, 0x1 << 8); - /* Fill most significant bits with valid data MSB */ - regmap_field_update_bits(scodec->reg_adc_fifoc, - BIT(SUN4I_CODEC_ADC_FIFOC_RX_FIFO_MODE), - BIT(SUN4I_CODEC_ADC_FIFOC_RX_FIFO_MODE)); -…

Hi, yesterday i did as usual an apt-get update/upgrade on my Armbian 19.11.3 (on a good old and always well working Bananapi M1). After that the desktop starts, but without showing the taskbar anymore. It was some kind of invisible, when i clicked the the upper left corner, the menu drops down. Unfortunately nearly nothing starts by clicking. The preferences are shown without any icons. Ok, time for a fresh install. I took the latest stable image Armbian Bionic 19.11.6 and put it on a SD card. System starts in console mode, i did all the setup stuff and installed the desktop. But the fresh installed desktop also started without the taskba…

How to unbrick the system? When something goes horribly wrong and you can not boot the system, this is the way to proceed. You need some Linux machine where you can insert SD card failed. With this procedure, you will reinstall the u-boot, kernel, and hardware settings. In most cases, this is enough to unbrick the board. You should check the file system before mounting: I do not understand

I have followed this guide and I can boot my Orange Pi Zero from SSD without the need for an SD card inserted. I want to keep a bootable backup for my system in case the SSD gets corrupted. I was thinking to clone my system in a USB stick (just like I did to clone from SD to SSD) and then use rsync once a week to keep everything up to date with a script like that. If I go in armbian-config > system > install I can see only one option: "Install/Update the bootloader on SD/eMMC". How could I clone from SSD to a USB stick? Is there a command like `sudo nand-sata-install`?

Login: Pi What the password? No 1234,root,bananapi,armbian

I am using Armbian 4.14 kernel on a custom board. As soon as the boards boots up I get a lot of oops and memory address fault. Software works on another board that use same memory and mtest always succeeds on faulty board even with complementary patterns. I have got the feedback that this new memory belongs to the newest revision level so SDRAM parameters needs to be updated. However I am using the 4.14 kernel so .fex configuration is not taken into consideration by the kernel, although initialize the SDRAM controller is bootloader->SPL's duty. Anyone knows how to update SDRAM parameters without using .fex config file or compile u-boot and SP…

Hello Community! File /boot/orangepi/OrangePiH5orangepi.dts is not self-explanatory.. :-( Is there any documentation on how to define GPIO.21 for example for DIGITAL OUTPUT with initial "Logical ONE" at a BOOT time? It will control Triac with 220 Volts on it. IT MUST BE EXACTLY AT HIGH LEVEL AT A BOOT TIME. How to do this? It should be in OUT mode. Any help appreciated!... Regards, Ellad

Hello, I will use the integrated CAN-Controller with the actual version of Armbian Bionic (or Buster) on the BananaPi-M1 Actually it is not possible to activate the CAN-Bus. I had activate the CAN in the armbian-config. After a reboot I the CAN0 is not integrate in the list from "ifconfig -a". What are the steps to activate the CAN-Bus on the BananaPi M1. Many thanks, André

Ever since I updated the BPi recently, the ramlogger stopped working. I'm regularly getting mail from the Cron Daemon saying this: /usr/lib/armbian/armbian-truncate-logs: 19: /usr/lib/armbian/armbian-truncate-logs: logrotate: not found … so, it looks like the paths are messed up since the program is definitely installed in `/usr/sbin/`.

I can enable bananpi M2 ultra sound (headphone and mic on pcb) You must add this on the dtsi file. dma: dma-controller@01c02000 { compatible = "allwinner,sun8i-h3-dma"; reg = <0x01c02000 0x1000>; interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ccu CLK_BUS_DMA>; resets = <&ccu RST_BUS_DMA>; #dma-cells = <1>; }; codec: codec@01c22c00 { #sound-dai-cells = <0>; compatible = "allwinner,sun8i-h3-codec"; reg = <0x01c22c00 0x300>; interrupt…

Hello, I'm coming to ask for help because I'm having a problem with plex and my external hard drive. Everything works well except that I do not see the folders at the folders of my external hard drive with the Plex interface, this is really frustrating especially since I can go to my hard drive via the file manager. I think this is a legal problem but I cannot resolve it. Could you help me ? Thanks in advance =)

Hi, I downloadded the latest debian_stretch_next for OPZ+2 H5. Yes, I know it's experimental and not production-grade, I just want to report the issue. The problem is that apt-get (dpkg-deb) fails to decompress deb archives during the upgrade procedure. Tried it on a clean install multiple times on different microSDs. Are the packages really corrupted or is there something wrong with the image? Error log in the attachments P.S.: ubuntu_xenial_next randomly panics during apt update. h5.txt

Hi, Working on a project that will manage and monitor batteries from a solar installation and wanting to see how low I can reduce its power consumption. Out of the box consumption is approx. 480mWatts. Currently using Armbian 21.05.8 Buster Don't need: USB WiFi Any display output and Only need eth0 for possibly 10 mins a day. Any suggestion on how to power down specific components such as above? Interestingly shutdown via the command line increase the power consumption to around 700mW?? Thanks, Rob.

I built armbian from the main branch for my tablet based on Allwinner A33 and the topic: Used q88_a33_tablet_1024x600_defconfig and tried q8_a33_tablet_1024x600_defconfig the image was built successfully, at startup I see the console of u-boot, and can use it bu OTG, but only before message the kernel starting... and then after kernel starting it will a black screen as i think the video mode or something else is configured incorrectly, I checked the boot kernel logs, the kernel starts successfully, there are no any errors during start, apparently the problem is only in the video output on my tablet. I ask for help, help me understand what th…

Hello! I have a problem, when activating the watchdog timer. It's work perfectly but on every updating polling to "dmesg" Log files are growing! How i can switch of this messages ? Help me, please!!!! dmesg example: [ 503.346179] wdt_restart, write reg 0xf1c20cb0 [ 507.350127] wdt_restart, write reg 0xf1c20cb0 [ 511.354322] wdt_restart, write reg 0xf1c20cb0 [ 513.346125] wdt_restart, write reg 0xf1c20cb0 [ 517.350354] wdt_restart, write reg 0xf1c20cb0 [ 521.354596] wdt_restart, write reg 0xf1c20cb0 [ 525.358773] wdt_restart, write reg 0xf1c20cb0 [ 529.362970] wdt_restart, write reg 0xf1c20cb0 [ 533.367194] wdt_restart, write reg 0xf1c20cb0 […

hi, i used armbian 5.14 (3.4.112)and the gc2035 worked nice. but in armbain 5.30 (3.4.113)the gc2035 shows the error : [CSI_ERR][GC2035]sensor_read err at sensor_detect! [CSI_ERR][GC2035]chip found is not an target chip. and in h3droid ,one of android img fo opi ,it was built in 3.4.113 too ,and it failed again... so what can i do to use gc2035 under .img built with 3.4.113? thanks.

Hi, after apt upgrade, armbian-zsh package is upgraded and breaks ZShell on Armbian Focal Desktop. During initial setup of Armbian on Odroid C4, zsh has been selected as default shell. After recent upgrade of armbian-zsh package, shell is switched back to bash w/o notice. Unfortunately, armbian-config is not able to switch between shells, so I am stuck with bash and cannot return to zsh. Is there a way to switch between the shells manually and enable some kind of debug log to see what is going wrong switching shells? BTW: Switching between bash and zsh on a clean recent Armbian Focal Desktop installation is also not possible. So th…

I have a working Armbian SD card and I used it for some time made some changes in the system (disabled some services, installed some libraries and made new services etc...). I use this SD card with Cubieboard-3 (Cubietruck). And I have a backup of the entire root filesystem from that SD card. Now I've got second Cubieboard-3 device and I need a second SD card to boot the second device into the same OS with actual changes. The good approach would be to backup only CHANGES in some manner that would allow me to install fresh armbian to new SD card and them roll my changes to it. But instead, i started a stupid approach of doing this: just copied the entire filesystem to back…

Hello. I try enable 1wire on Cibieboard 2. Could anyone describe to me how to do it? Where is kernel source on debian jesssie on Armbian for CB2

Hello, I am an brand new Orange Pi user. I download the Lubuntu_1404_For_OrangePi_v1_0_0.tar image from their site. untried it and made an image to a 8G micro SD card. Now I connected the HTML and started it up, all I got are the yellow and green LCDs lite up, then nothing happens, Are there some additional steps I am not doing? Thanks.

I have 4 usb device in my odroid N2 with bookworm. A powered USB hub, which has always woken up, and the found device are in the hub. If I put them in the N2 no difference. If I: ls -l /dev/serial/by-id pi@odroidn2:~$ ls -l /dev/serial/by-id total 0 lrwxrwxrwx 1 root root 13 Jul 22 02:51 usb-0658_0200-if00 -> ../../ttyACM0 lrwxrwxrwx 1 root root 13 Jul 22 02:51 usb-RFXCOM_RFXtrx433_A1XSS661-if00-port0 -> ../../ttyUSB1 And with.. sudo lsusb -v I get this output 23 from 192.168.5.101 pi@odroidn2:~$ sudo lsusb -v [sudo] wachtwoord voor pi: Bus 002 Device 005: ID 0bda:0411 Realtek Semiconductor Corp. Hub Device Descriptor: bLength …

how to make orange pi one connect to the internet by rj45 cable with using vnc viewer?

Hi All, I just want to ask what is the format of rootfs after writing it to nand? it is in ubifs? Thanks

How Rebuild the kernel, if i have in armbian headers kernel orange pi zero? I want rebild on arm board. I use old kеrnel 3.4.113

Hi, I have created an image with the following command /root/build/compile.sh BOARD=orangepi-r1 BRANCH=current RELEASE=focal BUILD_MINIMAL=yes BUILD_DESKTOP=no KERNEL_ONLY=no KERNEL_CONFIGURE=no COMPRESS_OUTPUTIMAGE=sha,gpg,img ROOTFS_TYPE=ext4 EXTRAWIFI=no CARD_DEVICE=/dev/sdb And it worked fine. Then I changed the filesystem to BTRFS and did /root/build/compile.sh BOARD=orangepi-r1 BRANCH=current RELEASE=focal BUILD_MINIMAL=yes BUILD_DESKTOP=no KERNEL_ONLY=no KERNEL_CONFIGURE=no COMPRESS_OUTPUTIMAGE=sha,gpg,img ROOTFS_TYPE=btrfs EXTRAWIFI=no CARD_DEVICE=/dev/sdb and got the following errors: sed: couldn't write 19 it…

Hello! I haven't had any problems with the updates so far, but today it no longer works. Maybe someone has an idea what the problem is? armbian.list deb http://mirror-eu-de1.armbian.airframes.io/dl/ buster main buster-utils buster-desktop deb http://apt.armbian.com buster main buster-utils buster-desktop apt update... root@fulla:~# apt-get --allow-releaseinfo-change --allow-insecure-repositories update Hit:2 http://ftp.de.debian.org/debian buster InRelease Hit:3 http://ftp.de.debian.org/debian buster-updates InRelease Hit:4 http://ftp.de.debian.org/debian buster-backports InRelease Hit:5 http://security.debian.org buster/updates I…

dear guys, I use banana pi, root@bananapi:~# uname -an Linux bananapi 4.2.3-sunxi #2 SMP Sun Oct 11 14:12:18 CEST 2015 armv7l armv7l armv7l GNU/Linux I have asymetric route, packet go out from one interface and comes in from another interface (tunnel ). already made 0 for all interface in /proc/sys/net/ipv4/conf/*/rp_filter ip_forward already enabled. i dump packet comes in succeed to our banana. but when i test using ping command, doesn't respond with reply. any suggest ? thanks

https://item.taobao.com/item.htm?spm=a230r.1.14.40.f57e21b68NeeMB&id=569157333974&ns=1&abbucket=13#detail It's name is QiHua, based allwinner H6. official system and all source code can be download from BaiDu net disk: URL: https://pan.baidu.com/s/1siA3QyOZ_SUAQIy2IVqwQg Password: 7u3q I like the armbian system, it simple, light and fast, I need it run on this board, but I don't know how to do. Any helps? Thanks!

In order to install webmin I need to install apt-show-versions however trying to install that fails

i can't change default english os lanhuage. i set and download my home language... dowloading language files,finish added to list, i tap apply wide-system change effect after next login..okay here problem! i try logout and re login, system don't change language i try logout and restart board...language not changed... why not change system the english language to other?

Hi all, I am trying to use a MCP3426 I2C ADC chip with my NanoPi Duo2. I have compiled a custom kernel with the mcp3426 driver in it, but I can't get it to load. The problem seems to be that the chip uses address 0x68 which is the same address that the commonly used DS1307 RTC chip uses. I have blacklisted the ds1307 module which has stopped that module from loading, but somehow '/sys/bus/i2c/devices/0-0068/name' still claims to be a ds1307. 'echo mcp3426 0x68 > /sys/class/i2c-dev/i2c-0/device/new_device' results in a "Invalid argument error" with 'i2c i2c-0: Failed to register i2c client mcp3426 at 0x68 (-16)' being logged in dmesg, and apparently the -16…

hello, root@orangepipcplus:~# cat /etc/armbian-release BOARD=orangepipcplus BOARD_NAME="Orange Pi PC +" VERSION=5.23 LINUXFAMILY=sun8i BRANCH=default ARCH=arm Hello everybody, I have sucessfully copy the armbian to the emmc memory, everything working well no sd needed .... when this is done I make a backup of the emmc with gunzip on my sdcard. dd if=/dev/mmcblk0 bs=10M | gzip -c >/mnt/sdcard/thx.to.kaiser.img.gz the backup on the sdcard working well, I exact it on a new sdcard with the command gunzip -c /mnt/sdcard/thx.to.kaiser.img.gz | dd of=/dev/new-sd-card bs=10M find ... the armbian os working on the sd card ... but when I try to put the emm…

kodi crash on start up crash fiile below thanks kodi_crashlog-20170217_233606.txt

Always running latest Armbian Buster: Since some months multiple machines with totally different application sets get slow writing to ANY mounted volume after one or more weeks of uptime (the busier the earlier). According to top IOWAIT exceeds user/kernel cpu usage. All applications and networking incl. disk reads run without any problem, until they write to the disk which makes them crawl. Even cp on a small file hangs. Any hint?

I tried to build an bridged AP so that I can reach the Internet from a WiFi net spawned from the BananaPiPro. By this I followed the procedure from armbian-config (config.network.sh). After install the AP is shown in the login screen: WiFi AP: SSID: (BPi), channel 7 (2442 MHz), width: 20 MHz, center1: 2442 MHz When I try to connect from my mobile phone it either says "connecting without Internet". The output in syslog is then: 026-07-06T12:35:02.645970+02:00 bananapipro hostapd: wlan0: STA 22:50:7b:ac:e3:2e IEEE 802.11: associated 2026-07-06T12:35:02.690671+02:00 bananapipro hostapd: wlan0: STA 22:50:7b:ac:e3:2e RADIUS: …

Hi all, I am using Trunk Image Hirsute(kernel 5.14) for Orange Pi Win Plus and follow below topic to compile the gstreamer: But when I am using the gst-play-1.0 --use-playbin3 --videosink="kmssink plane-properties=s,zpos=3" video.file to play the video, the whole system is hang. Then only reboot can recover the system Can you please give some suggestions? Regards, Tan

I want the default resolution of my board to be 1280x1080 after power on, and by default my sound output is through HDMI. Please give me some advice, Thanks.

I just want to know how to boot from SD card again after setting boot from nand (./nand-sata-install) on my cubieboard. I got a "Reset board" message. Thanks.

Hi, there is a question as selected to install the driver on the linux-3.4.112-sun7i ? I am a beginner and also sorry for my english.

Any reason why an XFS kernel driver isn't included in the Armbian images? I'm coming from the RHEL world so I have no idea if it's common for Debian and it's variants to not have XFS support? I'm kind of baffled. root@cubox-i:~# cat /proc/filesystems nodev sysfs nodev rootfs nodev ramfs nodev bdev nodev proc nodev cpuset nodev cgroup nodev cgroup2 nodev tmpfs nodev devtmpfs nodev debugfs nodev securityfs nodev sockfs nodev pipefs nodev rpc_pipefs nodev devpts ext3 ext2 ext4 vfat nodev nfs nodev nfs4 nodev jffs2 nodev autofs fuseblk nodev fuse nodev fusectl f2fs nodev mqueue…

Hello. My image for Orange Pi One has the following build after apt update and apt upgrade ARMBIAN 5.60 stable Ubuntu 16.04.5 LTS 4.14.70-sunxi "sudo systemctl enable resize2fs" does not work anymore Error message says "Failed to execute operation: No such file or directory" "sudo systemctl enable resize2fs && sudo reboot" works on old kernal images @tkaiser could you please advise how to reinstate SD card resize on first boot? Thank You.

Ok so the title can confuse more than it really is! So basically I have a armbian distro configured as NAT where wlan0 is the internal interface and eth0 is the "pubic" interface that provides internet (this set is provided out of the box by armbian-config). My devices connect over wlan0 grabbing an IP, say 172.24.1.114 I have added a VPN to a remote network resulting in the creation of ppp0, with IP 10.10.10.12 Having these info, what I want to achieve is: * Only one IP (e.g. 172.24.1.114) has to always go towards ppp0 (that is all traffic back and forth should go to ppp0, so I can either reach machines and navigate on internet with the remote IP…

Hello, Please help with this issue: No Сapture selection in alsamixer or amixer. root@cubieboard2:~# arecord -l **** List of CAPTURE Hardware Devices **** card 1: sun4icodec [sun4i-codec], device 0: CDC PCM Codec-0 [CDC PCM Codec-0] Subdevices:1/1 Subdevice #0: subdevice #0 root@cubieboard2:~# amixer -c 1 sget 'Line Boost' Capabilities: volume volume-joined Playback channels: Mono Capture channels: Mono Limits: 0 - 7 Mono: 7 [100%] [9.00dB] root@cubieboard2:~# amixer -c 1 sset 'Line Boost' cap amixer: Invalid command! root@cubieboard2:~# …

I was hoping to use the same type of backups for my Armbian Minecraft Server as I currently use for my RASPBX system which uses Raspbian on a Raspberry Pi 3 and sucessfully updates a backup of the entire SD card every night. I successfully modified and ported the RASPBX-BACKUP script to other Raspberry Pi's I have that are fulfilling other tasks and they also make backups just fine. The are also running Raspbian. I ported to my Le Potato running Armbian and when I try to run the initial backup it chokes with the following errors: rsync: symlink "/media/bkup/boot/dtb" -> "dtb-4.14.52-meson64" failed: Operation not permitted (1) rsync: symlink "/media/bkup/boot/uI…

Hi guys, Using Debian Jessie/armbian 4.5 here. Was today using tcpdump, tested out also tshark, and aparently the BPF rules are not working... (?) Is it just me, some kernel compiling, a bug, or am I missing something? I know for sure that in a very similar setup I have at work in Intel, I do not have this problem. This issue is present both with libpcap 1.7.4-1 and 1.6.2-2 As an example: rui@ruir:/etc$ sudo tcpdump -n not port 22 | egrep "22[ :]" tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on eth0, link-type EN10MB (Ethernet), capture size 262144 bytes 14:50:34.559080 IP xx.xxx.254.104.22 > xxx.xxx.xxx.2.…

Hello, I'd have a question, please. My goal is to setup the VNC server on Pine64 board to be able to connect to it remotely via RealVNC. Steps already done: (1) Armbian_22.11.1_Pine64_jammy_current_5.15.80_xfce_desktop.img.xz burn on 32GB micro sdcard (2) Armbian works well, it auto starts to nice grafic enviroment XFACE (3) I am able to connect to Pine64 remotely via Putty and SSH (4) I have followed this cookbook (#1) to install the x11vnc which works well when starting manually from command line (#2) #1:https://forum.armbian.com/topic/10330-remote-desktop-with-x11vnc/ #2 /usr/bin/x11vnc -rfbauth /home/bdn/.vnc/passwd -shared -ultrafilexfer -bg -o…

Hi, I've already installed Armbian once before onto the SD card of my Rock PI S (Non-flash version). Before upgrading to Focal, I plugged it into my serial receiver in order to verify that I got the procedures correct so when I upgrade I'd get a console. I was glad I did that as I had forgotten I couldn't get screen(1) to work with my serial device as it can't send and receive data at the 1.5Mbs. I ended up using minicom(1). I downloaded the Focal Edge version of Armbian, verified the data with the ASC key, and wrote it to the Micro-SD card. I then booted it and the blue LED started blinking indicating an alive and working kernel. But I got no data over the…

Hello all, I'm using Armbian 5.73 stable (Ubuntu 16.04.5 LTS) for a year or so on an OrangePi Zero. That little box is working as a backup box and network-wise DNS server via DNSMasq (ver. 2.75-1ubuntu0.16.04.5). The OS and general system is working very stable, but I'm having issues with DNSMasq. It's solving both local systems' names via /etc/hosts and internet hostnames for the whole network. Sometimes, DNSMasq stops solving external addresses. There'll be no error and warning messages anywhere, and when pinged with kill -USR1 signal, it happily prints the current stats. I'm running with a cache size of 6148, and I see no cache overflows in the…

does anyone know of a version of armbian that would work on a samsung galaxy book go with a snapdragon 7c gen2? i traid the generic version and it booted to the grub, and then it restarted like all other distros i've tried. i can not find a distro to boot on this dang thing. anyone have any ideas on what to do or try? i've hit a dead end i gotta dig deeper to figure something out, so any thoughts on this would be helpful .. thanks in advance

Hello, I'm turning my head around this problem, I have read numerous forum posts and docs but I didn't found an answer: Following https://linux-sunxi.org/GPIO, the same pin number calculation applies for sysfs and gpiod. But, for example, for PL2 it will be 11*32+2=354, or for opi3 lts there are only 255 line numbers for gpiochip1 (as per `gpioinfo gpiochip1`) :-S Pleeease tell me what am I missing !?!

There is only a desktop download for OPi 4 and it comes with XFCE desktop. I cannot change the color for the taskbar from the absolutely horrible charcoal gray, other than to the 16-color set. If I choose a light color, the font color doesn't automatically change to dark, or be set specifically, it stays as white. I cannot put the computer's name on the taskbar. I cannot put the temperature on the taskbar. I cannot put the CPU usage on the taskbar. With the taskbar on the left margin (deskbar), the icons for the launchers are single and huge - the full width of the taskbar, not in rows 0f 24 px icons like with LXDE. I cannot change the r…

Hi, everyone! Khadas Vim3l on Ubuntu, armbian. No hdmi sound, boot without any changes, fully stock! Tried to boot on 4.9 image from khadas and android pie - success. Imagies that is no hdmi sound only dummy output: Armbian_22.02.1_Khadas-vim3l_jammy_edge_5.15.25_xfce_desktop.img Armbian_22.02.1_Khadas-vim3l_focal_current_5.10.102_xfce_desktop.img Armbian_22.05.1_Khadas-vim3l_jammy_edge_5.17.5_xfce_desktop.img Armbian_22.05.1_Khadas-vim3l_focal_current_5.10.110_xfce_desktop.img How to fix?

hi all, sorry for the trivial question. in cubietruck plus board can I use the images for cubietruck 3? thank you

If you encounter this error install usb-modeswitch and reboot. sudo apt install usb-modeswitch sudo reboot

Hi! I'm sorry if the answer to my question is already documented somewhere, but I couldn't find it. I am trying to figure out how to build a specific release. My understanding is that you checkout the desired tag of the armbian/build repo and just build it. However, when I do this with v24.2.1 the image that comes out is named 24.5.0-trunk. Changing the version in the VERSION file (by default set to 24.5.0-trunk) changes the name of the output image, but it is not clear to me if that affects other things than just this. So basically, now I am confused which scenario is correct: Is using the armbian/build tag the correct …

new release date 8/21, boot goes thru first boot stuff ok, but when it starts the gui, hdmi dies and monitor shuts off, no ssh access either.Tried to dl xfce version, won't. Advise gheskett@shentel.net Earleir image worked fine until update this morning, is now stuck in uboot loop forever. Thanks

Hi ! I have a few Orange Pi boards- Zero, One, PC, One Plus, Zero Plus What I would like to know is about overclocking them. I already use 12v fans for cooling. Can someone please guide me how to overclock these boards. I just want to try the capabilities of these boards. Thanks to all the awesome people in advance. Update- Read about how the defaults(clock) are the best. Thanks Armbain. great for dummies like me.

Hello, I followed the steps Igor provided here to create separate partitions for boot & root. I'm now trying to flash my NAND using this SD card, but nand-sata-install doesn't work out-of-the-box with this setup. # df -h Filesystem Size Used Avail Use% Mounted on /dev/mmcblk0p1 20M 16M 4.1M 80% /boot /dev/mmcblk0p2 3.6G 2.3G 1.1G 68% / ... I tried making a lot of modifications to the nand-sata-install.sh script, but nothing seems to work. I would appreciate if someone could direct me as to what parts of the script need to be modified. Thank you.

I have recently managed to get SPI boot to USB SSD working on my Odroid N2+. However, to get there, I had to manually set setenv rootdev "/dev/sda1" in my /boot/boot.cmd With that set, SPI boot works. However, obviously I should not set it manually there, and the setting gets overwritten by armbian-config. My understanding is, that I should let boot.cmd unchanged (rootdev "/dev/mmcblk0p1") and armbianEnv.txt should do its magic, but the rootdev setting in armbianEnv.txt is simply ignored upon SPI boot and it fails to boot, as it tries to load the root fs from SD card... Any pointers, what might go wrong here or …

HI, I am hoing someone can help. I cannot seem to get UART1 working on Orange Pi1. Uart2 and Uart3 are working just fine. Everything indicates that the port is enables on the module but there is no actual data being sent out of PINs 38 and 40. Verifying that the port is enabled root@orangepione:~# dmesg | grep tty [ 0.000000] Kernel command line: root=UUID=1d571c77-01ce-4f06-a2dd-23d24e7835b0 rootwait rootfstype=ext4 console=ttyS0,115200 console=tty1 hdmi.audio=EDID:0 disp.screen0_output_mode=1920x1080p60 consoleblank=0 loglevel=1 ubootpart=2e9b222d-01 ubootsource=mmc usb-storage.quirks=0x2537:0x1066:u,0x2537:0x1068:u sunxi_ve_me…

Hello, please, is it possible (if yes, how or what are available parameters) to run nand-sata-install from command line "one liner" - I mean without going to programm GUI? I would like to just run one command with predefined command line parameters and it should automatically copy microsd to emmc storage. Many thanks

Hello guys. I have issue regarding with smart card reader interface. According to it's datasheet http://linux-sunxi.org/images/4/4b/Allwinner_H3_Datasheet_V1.2.pdf page " Support FIFOs for receive and transmit buffers (up to 128 characters) with threshold " But in practice, the size of FIFO is only 16 bytes. Is anybody worked with SCR interface? May be I must to select size of FIFO in some REGISTER? Thanks for help.

Hi! I have a Banana Pi Pro running last Armbian v5.20 via SD card. There is 2 usb HD 2TB connected.I create a software RAID1 /dev/md0 with the 2 usb hd dev/sda1 & dev/sdb1 mounted as /mnt/md0. Up to now all is working fine. My goal, put the root on that raid1. The script nand-sata-install does not reconize 'md' device, only 'sd' device so i did a very litte modification to the script to reconize 'md'. The script run fine and it transfert all from the SD card to the 'md' (raid) but after the reboot,,,,, nothing, the system wont start. I am not a linux expert but i think that the problem is that the raid must be start from /boot (still on SD card) before the system …

Hello. I've tried a kernel I build using the tool orange pi provides, that kernel boots with a good HDMI resolution. However, when I use the default kernel that comes with my fresh armbian installation, I can't get the HDMI resolution to 480p. I set the resolution in boot parameters. I'd appreciate any help.