Other families

This main thread has been locked. Thanks to the Armbian team, we now have our own Kobol club (kinda sub forum) dedicated to our products (Helios64 & Helios4). So now you are encourage to create individual threads for new issue, discuss feature, share setup, etc... This will help to improve overall readability. Note : Before asking a question please insure the information is not already available on Helios4 Wiki or addressed in a previous post in this forum. Latest Build : Check : https://dl.armbian.com/helios4/ Archived Build : Check : https://archive.armbian.com/helios4/archiv…

• 1

  Reputation Points

• 722 replies
• 268.3k views
• 39 followers

Werner

November 12, 20205 yr

hi, I am VERY happy with how 4.9 is running odroid-xu4. as i use it as media server and player wanted to see if i could get latencies (poitential) down by applying latest RT patches that are in line with current xu4-next kernel sources. added pathes to userpatches/kernel/odoirdxu4-next directory, build process went fine, have selected FULL-RT but it does not boot (final image) source: https://github.com/hardkernel/linux/tre ... dxu4-4.9.y rt-patches: https://www.kernel.org/pub/linux/kernel ... ts/rt/4.9/ it compiles ok but it does not boot ... has anyone looked at what the issue might be ? i don't have serial debuigger yet, have ordered bu…

• 1

  Reputation Points

• 1 reply
• 4.3k views

Igor

November 23, 20178 yr

After a major failure of my file server I bought a pair of seagate desktop USB3 drives to use for temporary storage while I sort out the mess. I plugged them into an XU4 and started transferring several 100GBs of data only to have it lock up solid. dmesg indicates a number of uas restarts, the last of which doesn't complete. I had the same thing on another SBC (one of the orange PIs I think, although I can't remember which model) and I also found references to the same problem on x86 boxes, so I think the problem is fairly generic. Apparently it can be worked around by adding a conf file to to /etc/modprobe.d, but I haven't got that to work yet (time has been …

• 1

  Reputation Points

• 5 replies
• 6.2k views
• 1 follower

tkaiser

November 21, 20178 yr

I am trying to set up serial communications over the CON10 connector (UART0 pins 4,5,6,8) to another board (BeagleBone Black) to transmit data parsed as strings between the boards. Based on this link, this should correspond to /dev/ttySAC0. I have been unsuccessful in achieving communication via these pins and device node. In using setserial to probe the port settings, I was concerned about the following output: setserial /dev/ttySAC0 /dev/ttySAC0, UART: undefined, Port: 0x0000, IRQ 83 In using dmesg to probe for more information, I found an identifier for SAC0: dmesg | egrep -i 'serial|tty' [ 1.020896] [c4] 12c00000.serial: ttySAC0 at MMIO 0x12…

• 0

  Reputation Points

• 2 replies
• 2.7k views

r1ch1er1ch706

November 16, 20178 yr

Is there anywhere I can find pulseaudio-equalizer or package with similar capabilities for Armbian on XU4? It appears to be out there for arm64 ...

• 0

  Reputation Points

• 0 replies
• 2.4k views
• 1 follower

Technicavolous

November 13, 20178 yr

My System: ODROID XU4 Armbian stable: Linux odroidxu4 4.9.56-odroidxu4 USB-3 HDD Cage with 3 SATA drives, connected to XU4 via USB2-HUB (Since XU4 onboard USB3 does not recognize drive cage, never has) The drives are 1.5TB, 3TB and 4TB in size. All have one partition of full size and are encrypted with luks/dm-crypt. I'm switching from a Debian 8 system on the XU4, which had no problem with disk decryption. After the initial setup on Armbian I'm now trying to use those disks. I can successfully decrypt and mount the 1.5 TB disk. But when I do cryptsetup luksOpen /dev/disk/by-uuid/9ef4da01-8c26-48f1-a945-d2f419068e2f somename th…

• 0

  Reputation Points

• 11 replies
• 5.1k views
• 1 follower

suchende

December 25, 20178 yr

Hi, I'm considering reinstalling OpenMediaVault using an Armbian image as the NAS performance on the current image I use is very bad (4-7 megabyte via Samba over Gigabit) and I've heard that it should be much better with Armbian. Since I have some data on my NAS that's protected with Ecryptfs, I wonder if the kernel config in a future update could be changed to include Ecrypt_fs module support. Thanks for considering making this change. All the best, Sebastian EDIT: tkaiser from the openmediavault forum took care of this. Thanks!

• 0

  Reputation Points

• 0 replies
• 2.6k views

rainforest1155

November 9, 20178 yr

I wonder if anyone can help. I have downloaded the latest build for my odroid-xu4 and have the kernel version 4.9.51-odroidxu4. The trouble is I cannot find any where the kernel headers for this particular version. The kernel headers that come with the dist is 4.9.31-odroidxu4 and when I do apt-get kernel-headers-$(uname -r) or apt-get kernel-headers-next I get version 5.0.33 and I cannot seem to download the version that I need to compile drivers. Anyone know where the version 4.9.51-odroidxu4 linux headers are? Thanks

• 0

  Reputation Points

• 9 replies
• 6k views
• 1 follower

Igor

October 20, 20178 yr

Hi All, I've just got the new Orange Pi R1 and as expected it's working just well with the Orange Pi Zero armbian image. The only thing I'm struggeling with is the Wifi driver. The driver compiles succesfully but it seems that the kernel needs patching as well: ... CC [M] /usr/src/rtk8189es-2015-12-15-90ed86d42d/rtl8189ES//hal/OUTSRC/rtl8188e/phydm_RTL8188E.o CC [M] /usr/src/rtk8189es-2015-12-15-90ed86d42d/rtl8189ES//platform/platform_ops.o CC [M] /usr/src/rtk8189es-2015-12-15-90ed86d42d/rtl8189ES//platform/platform_ARM_SUNnI_sdio.o CC [M] /usr/src/rtk8189es-2015-12-15-90ed86d42d/rtl8189ES//core/rtw_mp.o CC [M] /usr/src/rtk81…

• 0

  Reputation Points

• 1 reply
• 6.6k views

tkaiser

October 16, 20178 yr

Just a little question: I'm new with this device, but not with armbian. Tested the Image for HC1 and it works fine, but if i try to boot root filesystem from sata device (using armbian-config, sata install) it didn't boot. Anyone tested that with success? Thx

• 0

  Reputation Points

• 19 replies
• 17.3k views
• 2 followers

nihilista

October 19, 20178 yr

Guys, how can I install Mali's X11 userspace driver for desktop, web browser and video hardware acceleration Thanks in advance.

• 0

  Reputation Points

• 1 reply
• 3.7k views

Igor

October 11, 20179 yr

Hi, I lose hdmi output if I unplug the hdmi cable and plug it again .. I can still access the odroid via ssh.. Any help is greatly appreciated !

• 0

  Reputation Points

• 2 replies
• 4.5k views
• 1 follower

krpt

October 5, 20179 yr

Hi, Tried searching on docs.armbian.com and the forums but got more confused than anything else. I just installed legacy armbian on my xu4 and the only thing missing is proper video decoding ( vlc won't show any image and mplayer complains that my configuration is too slow ). Could somebody point me to a tutorial on how to enable hardware ( mali t628 ) video decoding ? Thanks for your help !

• 0

  Reputation Points

• 5 replies
• 5k views

zador.blood.stained

September 28, 20179 yr

after installing armbian on my odroid-xu4-box and about one hour later the screen was going black. But I was not able to get back the running X-Session. So I rebootet as first and as next step I disabled the xdg-screensaver to off, but with no succes - the screen goes black again and neither a moving of the mouse nor a touch the keyboard brings the screan back to activity. So - now what can I do here ? The same behavior appears, if I switch off the screen, if I wanna make a pause for some times. After controlling the xdg-screensaver status I get "off". So it seems, that no screensver is active and running. Which process produces this behavior ? Hope anyone …

• 0

  Reputation Points

• 3 replies
• 4k views

Igor

September 11, 20179 yr

hello, during ansible-fact-gathering following errors are logged. no instability has been noticed. uname -a Linux nas 4.9.46-odroidxu4 #10 SMP PREEMPT Fri Sep 1 05:29:13 PDT 2017 armv7l GNU/Linux Sep 06 15:02:36 nas ansible-setup[28480]: Invoked with filter=* gather_subset=['all'] fact_path=/etc/ansible/facts.d gather_timeout=10 Sep 06 15:02:37 nas kernel: Unhandled fault: asynchronous external abort (0x1211) at 0x00000000 Sep 06 15:02:37 nas kernel: pgd = e69ccc80 Sep 06 15:02:37 nas kernel: [00000000] *pgd=42c04003, *pmd=00000000 Sep 06 15:02:37 nas kernel: Unhandled fault: asynchronous external abort (0x1211) at 0x00000000 Sep 06 15:02:37 nas kernel: pg…

• 0

  Reputation Points

• 2 replies
• 3.7k views
• 1 follower

chymian

September 29, 20179 yr

I see the download page says there are USB 3 issues with the mainline kernel (and eMMC, which the board doesn't even have?) and serial console for legacy kernel is broken. I've also read that HMP isn't supported on mainline either. Which kernel is recommended for general mini server usage with an attached hard drive and the OS installed on the hard drive with SD only for boot? I'm thinking of replacing my old cubietruck with it, running nginx as an SSL web proxy and a little bit of web serving.

• 1

  Reputation Points

• 4 replies
• 5.6k views

Igor

September 3, 20179 yr

Dear all.problem with my Xu4My router is a bit buggy..[ i think or my isp ]When my isp has a hick in the wan lineMy Xu4 does not automatic reconnect with my lanIs there a option to auto reconnect when there is a connection lose Now i reboot the xu4 manually and then is working everything fine'I use the latest armbian on my Xu4

• 0

  Reputation Points

• 24 replies
• 17.6k views
• 1 follower

tkaiser

November 2, 20178 yr

Hi. My dtb skills seem to be lacking, so I'm seeking guidance I'm running Armbian 5.27 from the sd card, kernel is 4.9.20-26 after an Apr 10 update. /boot has the following dtbs: -rw-r--r-- 1 root root 60782 Apr 10 21:29 exynos5422-odroidxu3.dtb -rw-r--r-- 1 root root 60031 Apr 10 21:29 exynos5422-odroidxu3-lite.dtb -rw-r--r-- 1 root root 60936 Jul 1 12:55 exynos5422-odroidxu4.dtb I want to change the fan threshold settings and pwm values to try and get more aggressive cooling as I'm not quite staying out of thermal throttling. After converting exynos5422-odroidxu4.dtb with dtc it's easy to see where both the thresholds…

• 0

  Reputation Points

• 10 replies
• 6.3k views
• 1 follower

James Kingdon

July 3, 20179 yr

I have my ODROID XU4 configured so that the SD /boot files boot the machine on a SSD formatted to ext4. This works fine with 4.9.30, but fails with the 4.9.33 kernel I installed today. The only useful message I see is that it can't find my SSD's uuid. The uuid is correct so I suspect that the kernel does not have or is not loading a USB driver. Does anyone have a suggestion on how to boot using the 4.9.33 kernel? Thanks, Michael

• 0

  Reputation Points

• 3 replies
• 4.8k views
• 1 follower

tkaiser

June 26, 20179 yr

I am a noob on Linux (unfortunately). I run a Xu4 with armbian on it. On the Xu4 i run Domoticz, my home automation system. Something is eating my hdd space; a fixed amount is used up every hour. I set up a new system with a bigger sd but I want to get to the bottom of the issue. I do not know how I can see what the Xu4 does every hour. Perhaps a log or a backup? Perhaps my OS is doing something, or perhaps my Home automation. I do not run any script to make periodic backups or anything else like that. How can I figure it out? Thanks!

• 0

  Reputation Points

• 1 reply
• 3.5k views
• 2 followers

gnasch

June 16, 20179 yr

Hello Everyone, As @tkaiser is probably aware from the hardkernel forum, I'm having issues with USB/SMART and OMV. Basically, USB resets whenever SMART data is pulled from OMV's web interface, it works fine if I manually do it in shell. Here is some info. http://sprunge.us/HdbK I was proposed to update smartmontools to 6.5, but there are library dependencies that are missing. If any of you fine folks have any ideas as to what could be causing it, I would be grateful. Thank you

• 1

  Reputation Points

• 11 replies
• 13.1k views
• 1 follower

Stuart Naylor

August 18, 20179 yr

I'm trying to get my Logitech Quickcam working and tested using Armbian Xenial Mainline 4.9.13. It's worked out of the box on just about every other distro tried in recent years...not sure on Armbian. Here is the output from lsusb: Bus 003 Device 007: ID 046d:08d8 Logitech, Inc. Quickcam for Notebook Deluxe Bus 003 Device 006: ID 0c45:7000 Microdia Honestly, the webcam may work fine now, but I'm having issues installing a package to test it, such as Cheese or guvcview. Can someone assist me with checking it out? Once I get the webcam working, I'd like to use it with Google Hangouts or Skype (via exagear). Thanks!

• 0

  Reputation Points

• 15 replies
• 7.1k views
• 1 follower

BigG2017

May 13, 20179 yr

Hi All! I was wondering if there is a proper way to deploy a freshly built armbian for Odroid XU4 on an eMMC? Unfortunately, the SD-Card version doesn't seem to work with the eMMC. After searching for this topic I couldn't find anythin in particular related to Odroid. Thanks, Viktor

• 0

  Reputation Points

• 5 replies
• 7.9k views
• 1 follower

N4IRS

October 2, 20179 yr

Hi All, I might need your help with one issue I've encountered. I'm running debian with the 4.9.20 kernel on an Odroid XU4 board. I've compiled the kernel with the options for AppArmor enabled. The installed AppArmor version is the 2.10.95 (auditd is also installed in version 1:2.4-1+b1). ## Kernel Options ## CONFIG_SECURITY=y CONFIG_SECURITYFS=y CONFIG_SECURITY_APPARMOR=y CONFIG_SECURITY_APPARMOR_BOOTPARAM_VALUE=1 CONFIG_DEFAULT_SECURITY_APPARMOR=y CONFIG_DEFAULT_SECURITY="apparmor" CONFIG_SECCOMP=y CONFIG_SECCOMP_FILTER=y CONFIG_AUDIT=y ## ## AppArmor itself is working without any issues. If I set…

• 0

  Reputation Points

• 1 reply
• 3.4k views

asterisk-user

April 18, 20179 yr

Hi, I really like the OS but notice that while operating the fan never turns on. It does spin when first powered up but never after that while running. Is there something additional i need to add to get the fan to operate? Thanks

• 0

  Reputation Points

• 2 replies
• 3.2k views
• 2 followers

nyg

April 4, 20179 yr

Hello, I had succeeded install last version of Armbian on Odroid XU4. I have WiFi USB dongle Realtek RTL8812AU chipset (ID = 0bda:8812) I see it $ lsusb Bus 003 Device 003: ID 0bda:8812 Realtek Semiconductor Corp. RTL8812AU 802.11a/b/g/n/ac WLAN Adapter $ dmesg | grep -i usb [ 9.630704] [c5] RTL871X: rtl8812au v4.2.5_10143.20140103_ASUS [ 9.887562] [c5] usbcore: registered new interface driver rtl8812au [18812.680134] [c2] RTL871X: nolinked power save leave but no Wifi interface Could anyone please help solve it

• 1

  Reputation Points

• 23 replies
• 28.1k views
• 3 followers

funkypunkskunk

May 10, 20197 yr

Hi! I've been using Armbian on my Odroid XU4 for some months now. It runs LogitechMediaServer, Home-assistant, Openmediavault,... It's great. However, today, I've just ran apt-get upgrade, reboot because of an update of the kernel and then... no reboot! The blue LED of the Odroid is lit (it doesn't blink), there is nothing on the HDMI output, nothing on the network,... It seems like the odroid cannot load the kernel. Is there anything I could do to try to make it boot again ? Yeah, I know, I should have done a backup of the SD card before the update ... Thanks for your help!

• 1

  Reputation Points

• 13 replies
• 7.6k views
• 3 followers

BigG2017

April 17, 20179 yr

Hello, I've copied the image of the Debian Jessie Server Legacy 3.10.105 to my 32Gb eMMC with DD (previously was on Android). See attachment for the final result (gParted). Does it sound OK? What is this 4Mb unallocated at the beginning? I tried to boot it but my XU4 only has its blue light lightened up (was blinking when the eMMC was on Android). There is nothing displayed when I plug the HDMI to my TV. I must have missed something... Regards!

• 1

  Reputation Points

• 4 replies
• 4k views

zador.blood.stained

March 11, 20179 yr

Hello, i am using an Odroid Xu4 in an open Access environment and i want to disable USB Keyboards. I already tried the following: Create a file called, e.g., usbhid.conf in /etc/modprobe.d/ and add the following line: blacklist usbhid Then re-generate your initramfs with: update-initramfs -u -k $(uname -r) or, if you want to rebuild the initramfs for all installed kernel versions: update-initramfs -u -k all After you reboot, usbhid.ko will be prevented from loading. But it doesn't work for me. I Also get an Error while trying to update initramfs dirtydroid@odroidxu4:~$ sudo update-initramfs -u -k all ln: failed to create hard link …

• 0

  Reputation Points

• 0 replies
• 2.9k views
• 1 follower

xu4armbianuser

March 2, 20179 yr

I'm trying to get a full serial console on my XU4. I currently only get the U-boot output. The last message says "Loading Kernel". I never get any kernel related messages. I understand I will need to start up a getty to actually log in via this console port, but I haven't even gotten that far. In my (unchanged) boot.ini I have console=ttySAC2, 115200n8. And when the system boots up, I cannot manually write anything to that port (as i believe the kernel has it opened) Any Ideas? Thanks! Caleb

• 0

  Reputation Points

• 4 replies
• 6.2k views

justsomeguy1983

February 15, 20179 yr

Dear all, thanks for the work of you, to provide us with the Armbian Images for our arm-based boards. BUt i've a small issue, starting the last Image for Odroid XU4. If I write the Image to a SD-Card and start the XU4, all Things run well. When I write the Image to my eMMC-Card (original Hardkernel, 64GB), the XU4 doesn't start. Normally, it's not such a big Problem, but there is a massive speedup, using eMMC with XU4. How can I get Armbian startet, installed on an eMMC? Many thanks for your Support, Burkhard

• 1

  Reputation Points

• 77 replies
• 68.2k views
• 7 followers

windumasta

February 11, 20188 yr

Hello everybody, I am a new user on this forum : I received the Odroid XU4 this morning and installed Debian on the eMMC card. I booted, and everything is working except the cooling fan: it seems not to start, even when I plug in the adapter before it boots. Is that normal, because even at 66 °c, it doesn't start...

• 0

  Reputation Points

• 6 replies
• 5k views
• 1 follower

zaNevar

February 6, 20179 yr

Hi Igor, Hi Armbian team, I wanted to give a short teaser of an upcoming board I have been developing. The board will be launched through a crowd-funding campaign in couple of weeks. Codename : Helios-4 I'm sure the heatsink will give you some hint The board has been build around the Marvell Armada 388 SoC / SoM from SolidRun. So part of the design is inspired from the Clearfog dev board. Actually the SolidRun helped me on the PCB layout to make this little guy reality. Here the main specs : - dual core A9 @1.6 GHz (max 2Ghz) - 1GB DDR3 (2GB optional) - 4x SATA III - 2x USB 3.0 - 1x Gigabit …

• 1

  Reputation Points

• 55 replies
• 40.4k views
• 8 followers

malvcr

October 1, 20188 yr

Just using ubuntu and want to change to ambian ASAP

• 0

  Reputation Points

• 1 reply
• 3.2k views
• 1 follower

wildcat_paris

November 14, 20169 yr

Hi, I was wondering if there is a build of Armbian for the Odroid xu4 with a more recent Linux version. I currently have 3.10. It is super old ... Thanks in advance

• 1

  Reputation Points

• 1 reply
• 3.3k views
• 2 followers

Igor

October 20, 20169 yr

I am now testing armbian on my XU4 and...AMAZING...I have very little fan noise. I am using the Noctua fan as per; http://forum.odroid.com/viewtopic.php?f=65&t=15310 and I haven't even implemented the fan control script [yet]; https://github.com/nthx/odroid-xu3-fan-control Silence is golden... armbian ROCKS!

• 0

  Reputation Points

• 2 replies
• 4.9k views
• 1 follower

Igor

October 6, 201610 yr

The ChangeLog of Armbian says that overlayfs was added in V5.15. I got installed V5.20 (or actually an earlier and then apt-get upgraded) yet the overlayfs is not available (kernel 3.10.103-odroidxu4). I have even tried installing linux-*-next and *uboot*-next (not even knowing what the -next mean) but it didn't help, still no overlayfs in /proc/filesystems. Also, on reboot the Odroid is missing LAN connection randomly. It can be fixed by running dhclient manually but then the ethernet card is named by systemd. Normally it's eth0 and the networking works. I couldn't figure out what is the root cause of this issue, it seems random. I have also read in a ChangeLog that…

• 1

  Reputation Points

• 7 replies
• 6k views
• 1 follower

wildcat_paris

September 22, 201610 yr

Hi all I'm currently using armbian on a Odroid-XU4 and to use a peripheral I need to patch the kernel. So to start that process i run: apt-get source linux-image-$(uname -r) which failed: Unable to find a source package for linux-image-3.10.102-odroidxu4 I tried adding adding the sources by adding deb-src http://apt.armbian.com jessie main to the armbian.list but this is aparently not a thing. Do any of you have any idea where i can find a souce repository. Thanks in advance. edit: on a sidenote is 3.10.102 really the newest kernel available for this board using armbian?

• 1

  Reputation Points

• 20 replies
• 10.5k views
• 1 follower

wildcat_paris

September 19, 201610 yr

i installed the xu4 server (legacy) for debian jessie and get no output on the hdmi/dvi connected display. what is meant by "Serial console enabled" in the description? thank you for producing armbian for odroid xu4! i like the board - it is fast! andrew

• 1

  Reputation Points

• 4 replies
• 4k views

andrewufrank

September 13, 201610 yr

Hello, I experimented with various OS-es for my new Odroid-XU4. From what I have learned I like armbian the best because it's the closest to the original debian. A clean, small, tuned up system with the possibility to switch back to sysvinit from system(d). What I would run on it is not a desktop environment but exactly Kodi. The XU4 comes with Ubuntu 16 LTS preloaded to sdcard and I can say this is the OS which maxes out the potential of this hardware. With this after an update & upgrade everything works out of the box: kodi, networking, hdmi-cec, hdmi-audio. With using the unofficial debian jessie for odroid: http://forum.odroid.com/viewtopic.php?f=114&t=175…

• 0

  Reputation Points

• 4 replies
• 9.2k views
• 1 follower

Jerome

June 11, 20179 yr

Hello everybody, I have been having an issue lately with my Odroid XU4 running Armbian's Ubuntu Xenial server. The problem is that the ethernet interface would only be detected every once in a while upon a reboot of the system, however, after performing an update earlier today, the ethernet interface is not detected no matter how many times I reboot the system or mess with settings. Please help as I'm sort of a noob with debugging linux issues and this is the main interface for my mini-network. Huge thanks in advance. UPDATE: Apparently the update caused the device name to switch from eth0 to enx001e06311a69 and by reconfiguring my servers to use that interface it…

• 0

  Reputation Points

• 1 reply
• 5.7k views

KodiakFi

August 2, 201610 yr

Since I had a power supply problem with my XU4 I decided to download the image and start from scratch. First time I recall everything went smooth until my PS failed. Now, starting from a fresh image, when the first boot gets to SSH key regeneration, it hangs forever. Tried several times, tested the sd card, used a different one for test. Still hangs at SSH key regeneration. I had never tried moving the OS to the HD. All the contents there are good and it has passed all the long smart tests. If I reboot after a while hanging at SSH key regeneration it boots and does all the password stuff as expected, and everything else seems fine. Should I worry about it?

• 1

  Reputation Points

• 18 replies
• 6.5k views
• 1 follower

wildcat_paris

July 11, 201610 yr

Am getting very interested in Armbian for a classroom server project and am experiencing an odd problem. Certain web pages in Firefox will cause the hd to 'click' loudly, then the desktop icon disappears and the whole system locks up for about 20 seconds until the desktop icon reappears then everything seems fine again. I have not been able to pin down what is happening because it's inconsistent which pages cause the problem. (viewing the preview for this post caused it to happen.) Might go an hour, might happen several times in a few minutes. Right now my plan is to start from scratch a new Armbian install because I did to some messing…

• 0

  Reputation Points

• 5 replies
• 4.2k views

wildcat_paris

July 4, 201610 yr

Dears, Is there any recent Kodi compilation for XU4 ? Ive build it myself but whenever i try to load it, it gives me an warning saying that GLX/DRI2 is not supported and it also fails to open swrast. The other try i did is to download the .deb package from the mdrjr repository and unfortunately i get the same error. I believe i am missing the right drivers.... By the way, l today was my first experience with armbian... and honestly, i am very impressed. Any ideas ? Best, hippie

• 0

  Reputation Points

• 3 replies
• 6.7k views
• 1 follower

Jerome

June 10, 20179 yr

Good Morning! I'm using ODROID-xu4 and did Download your image. I wonder if the image has support for XFS Filesystem? Because I would like to install a Webserber. Grateful! Luis Ferreira

• 0

  Reputation Points

• 3 replies
• 5.3k views

tkaiser

May 16, 201610 yr

Hi, I installed Armbian_5.00_Odroidxu4_Debian_jessie_3.10.96_desktop.raw on my ODroid, plugged a 2TB external drive into the USB 3 port, and ran nand-sata-install. I chose /dev/sda1 as the root. After completing, and rebooting, it appears it installed an operating system on /dev/sda1, but I'm still using the SD card as the root: root@odroidxu4:~# mount /dev/mmcblk0p2 on / type ext4 (rw,noatime,nodiratime,errors=remount-ro,commit=600) .... I tried changing boot.ini to point to /dev/sda1: setenv bootrootfs "console=tty1 loglevel=1 root=/dev/sda1 rootwait ro fsck.repair=yes" but it would not boot with this setting. Is there any more information I can p…

• 1

  Reputation Points

• 4 replies
• 4.7k views

Igor

February 28, 201610 yr

Hello everyone, I would like to build an image for the Rasperry Pi 1, 2 and Zero. I could not found a download for a RPi on armbian.com. Then I saw that `rpi` is disabled in `/lib/configuration.sh`. Even when enabling it, I get an error during build, saying "[ error ] Building failed, check configuration" . I wonder why the Raspberry Pi is not supported. Is it due to its closed hardware? Thanks!

• 1

  Reputation Points

• 140 replies
• 194.5k views
• 6 followers

perlian

March 4, 20224 yr

are there plans to produce a version of armbian for odroid hardware. the new xu4 seems to be amazingly fast... andrew

• 1

  Reputation Points

• 9 replies
• 6.6k views

darkmen

January 24, 201610 yr