Amlogic CPU Boxes

Armbian now has a community supported build target for amlogic TV Boxes (aml-s9xx-box). You can now build your own builds directly with the Armbian build system. This is now an opportunity for members of the community to move the support for amlogic TV boxes forward within the Armbian framework. If you are not familiar with the Armbian build system check out the Armbian developer documentation. If you have idea on how you would like to see things evolve/change please use this forum to share your thoughts and ideas and submit PRs for any code changes you would like to see. I am currently testing this code against the four different amlogic based …

Hello, I need to ask this stupid question... I have an aging m8 tv box.(k200)..so i would like to ask if it's viable to run Armbian on it... Currently i have a beelink x2 running just beautifully armbian ....GREAT job to all the devs .....but i am thinking of using it more as a TV box and less as a linux server....so it would be great if i could replace M8 with beelink and use m8 for linux ... TIA

Hi, on my MXQ Pro S905x I managed to install the Armbian_5.88_Aml-s905_Ubuntu_bionic_default_5.1.0_desktop_20190611.img.xz version in the emmc and used meson-gxl-s905x-khadas-vim.dtb........when I ran the ls command I only got 2 options Install2018.sh or install.sh I chose install.sh. At startup I have to press the "X" on the keyboard to start the graphical environment, how can I solve it!? thank you!

Hello @all I Have a Tanix TX3 Amlogic S905X3 With 4GB RAM and 32GB ROM. It has a SP6330 Wifi / bluetooth Chip. High resolution PCB Pic: https://ibb.co/zbqW5HH I want to get the Sound and BlueTooth Working. I have used the Premade "Armbian_20.10_Arm-64_focal_current_5.9.0_desktop.img.xz" and Ethernet Works, Wifi Works (with small tweaks) This link helped me to get wifi working. Armbian Build for Nexbox A95X with AP6330. My armbian info: ``` root@tx3:~# cat /etc/armbian-release # PLEASE DO NOT EDIT THIS FILE BOARD=arm-64 BOARD_NAME="ARM-64" BOARDFAMILY=arm-64 BUILD_REPOSITORY_URL=https://g…

Hi with the curiosity of being able to install Armbian I got a friend to give me an MXQ PRO 4K similar to mine in aesthetics but with different hardware this one has a s905 processor below I release the info screens. I renamed u-boot-s905 to u-boot.ext with .dtb p200 because I understand from the info that this model mounts the hardware, then I boot with the toothpick method and it stops on the screen in the picture below, I tried both from SD and from usb pendrive same result! extilux.conf LABEL Armbian LINUX /uImage INITRD /uInitrd FDT /dtb-6.1.0-meson64/amlogic/meson-gxbb-p200.dtb #FDT /dtb/amlogic/meson-gxbb-p201.dtb #FDT /dtb/amlo…

Hi. I cant boot versions with 6.1.30 and 6.4.3 on s905x2 t95q . It boots in black screen. 6.1.11 working fine.

@SteeMan - in case you want to experiment (i.e. not sure if it really works), you might play around with chainloading the g12a-u-boot.bin (s905x2) and sm1-u-boot.bin (s905x3) from https://github.com/hexdump0815/u-boot-misc/releases/tag/200926-01 or gxb-u-boot.bin (s905) or gxl-u-boot.bin (s905x) from https://github.com/hexdump0815/u-boot-misc/releases/tag/200718-01 ... basic chainloading goes like this - https://github.com/hexdump0815/imagebuilder/blob/master/boot/boot-amlogic_gx-aarch64/s905_autoscript.txt - maybe compare it to the balbes150 boot scripts for fancier ways and most probably better armbian integration ... the files mostly exist in a serial version for seria…

Hi, I would like to know if its possible to boot from SD card in my model of Android TV BOX. It does not have a reset button but has an update app. Its a Giga TV Box HD890 4K. It has an Amlogic CPU I do all the process of installing Armbian in the SD card, Android starts an update and it says: "Map file is too short". I really dont know what I have to do to enable multi boot. Installation is aborted. Im getting really upset for not being able to install Armbian. Any help to this issue would be really welcome. Sorry for my bad english

Hi all. I'm newbie. I have a TX3 mini, I read some guides to download image and flash to SD Card to run Armbian in TX3 mini. But there are no suitable image file for S905x Soc in these URLs https://yadi.sk/d/pHxaRAs-tZiei https://mega.nz/folder/j9QSDQSQ#6WpasOlbZYIInfw6yo4phQ https://www.armbian.com/download/ So please share me link to download this image file Thanks so much

Hi, so after many hours of trial and error I have managed to get the latest Armbian with Kernel 6.1.27 running on my old mxq s805 tv box. Albeit only thing that is not working is hdmi output and wifi. So for anyone else trying to accomplish something similar, my steps were: https://github.com/hzyitc/armbian-onecloud Downloaded the latest release of this build for the onecloud device as it also runs on the s805 amlogic chipset (props to the developer for still updating) Burn the image to your sd card. Then after the image is burned, create a textfile on the root of the sd card and name it „uEnv.txt“ …

After trying the 6.1.11 version of the system (XFCE Edition), I could get the system to start, but the loading proccess get stuck on "random : crng init done". I've been waiting for about 20 minutes now and the proccess stay on like the attached image. Downloaded file: Armbian_23.02.2_Aml-s9xx-box_bullseye_current_6.1.11_xfce_desktop.img.xz

Hi, I'm trying to install armbian on my old Magicsee N5 Plus. But I have an Error Failed to map file (See picture here : https://1drv.ms/u/s!AhhHb6kGus27i8sO_dCKJlSu9VWZrA?e=Or9XyL). I was on SlimboxTV (ATV 14) system. I also reflash with N5 Plus official firmware and try also with N5 Max official firwmare (very closed hardware). But I always this message ... Any Idea ?

Hello to everybody I am trying to setup a brand new X96 max+ 4/64 Tv Box as a small linux machine but its simply doesn't work... I am using Armbian_20.10_Arm-64_bionic_current_5.9.0.img ...I think i have tried all the necessary .dtbs according to this guide : http://mrbluecoat.blogspot.com/2020/10/install-linux-on-x96-max-x96-max.html (i skipped the hk1box-bootloader.img cause I don't have a linux box handy) but nothing just about every time...not a single case where I saw something from Armbian. I have a Franklin9 (judging from the Android Recovery Screen) complaining that block is too short....so what is the deal...is it one way street to downgrade X…

How to put armbian on this tvbox? 8GB+128GB Media Player H.265 Q96 MAX Smart TV Box Android 11 Amlogic S905L Quad Core 2.4G WIFI 4K Set Top Box Home Theater. The latest TV Box in 2022, supports 4K resolution, enjoy super-definition images and breathtaking viewing effect. H.265 decoding technology saves half of the bandwidth than H.264, so it can show vivid and rich image details. 2/4/8GB RAM and 16/64/128GB ROM, large capacity allows you to download more applications and games in your TV box. Amlogic S905L quad core processor is adopted for smooth and flexible operation, no worries about slow running problem. The latest Android 11.1 system, with open-sou…

I follow the method here: My box can now see the wifi, but there are a few quirks: 1. It sees only some of the 5Ghz band. For example, it can't see my own 5Ghz AP, but can see my neighborhood 5G APs 2. when connected with either 2.4Ghz and 5Ghz band, and I did the speed test. It is fine with the download speed, but the upload speed is just less than 1Mbps, always. Thus, the connection is virtually useless, e.g. I can vnc to it, but it shows black screen because the screen can't be uploaded to my vnc client due to the upload speed problem. Is there any work around? My armbian: Armbian_20.10_Arm-64_focal_current_5.9.0_desktop.img dtb file: /d…

I'm been trying to install Armbian on this TV.BOX console. I already test bookworm xfce image of Armbian as like the last XFCE image → Armbian_community_26.2.0-trunk.357_Aml-s9xx-box_noble_current_6.18.7_xfce_desktop I als test minimal images ad they don't work. The spces of console are : Processor (CPU)Amlogic S905X3 Quad-core ARM Cortex-A55, up to 1.91GHz Graphics (GPU)Mali-G31 MP2 RAM4GB DDR3 Storage (ROM)32GB eMMC Video OutputHDMI, supports up to 8K@24fps (Android system) and 1080p (EmuELEC system) Connectivity2.4G/5G Dual-band Wi-Fi, 10/1000M Ethernet LAN, Bluetooth 4.0 Ports1x USB 3.0, 4x …

Hello guys! I have a T95Z Plus TV BOX with 3GB RAM, 32GB ROM, and an arm S912 CPU. I can run Armbian just fine from the SD card, but when I try to install it on the eMMC, I get an error message saying something like, "You're already running from eMMC, or the eMMC was not found." And, obviously, I'm not running from eMMC, so it seems like the system just isn't detecting it. I did some research, and it seems like there might be different eMMC manufacturers for the same T95Z Plus model. So, I might need to adjust the "Max frequency" parameter in the .DTB file for the T95Z Plus in order for Armbian to recognize the eMMC on my device. D…

Hello, I am currently using a TV BOX X96 Mini running Android TV 9 and using AMLOGIC S905W CPU. Then I was intending to run on ARMBIAN, so I followed the instructions on this WEB: [https://i12bretro.github.io/tutorials/0316.html] After doing the full setup steps, I used 2 ways : Method 1: Press the reset button on the TVBOX to boot (But not in armbian but in android ] Method 2: I used the application available on the TVbox which is [UPDATE] to run [aml.autoscript.zip], and after I press the update button it enters the Download Mode of the TV box and gives an error, and that's me Can't get into ARMBIAN

Hi, I'm trying to repurpose my Vero 4k (not 4k+) by installing Armbian on it. The device is based on the S905X and it looks like the most recent versions include a dtb for 4k, thanks to the work done by chewitt. I used the AMLogic s9xx TV Box edition and followed these instructions in the forums to copy the dtb and u-boot. However, I'm having some trouble getting the device to boot into an SD card flashed with the Armbian image. I was wondering whether anyone else has some experience with this. Here's what I tried so far: Downloaded and extracted the image (I used the Minimal/IoT version) Wrote the image to an SD Card (tried two …

Hello there! Before I start I'm gonna give a bit of information about my TV Box MXQ Pro 4K (S905W) 1GB RAM 8GB STORAGE Armbian 20.02 Kernel 5.5 (or that's what I remember) Okey, so I wanna install a Wi-Fi driver on Armbian I think my Wi-Fi chip is RTL8189ES (I'm gonna check tomorrow to be sure) I've looking on the forum and Google and so far I know that i need Linux headers, i installed them from armbian-config but i don't know if they are installed correctly, because I can't find them anywhere Then I need the RTL8189ES driver and run a Makefile Is this right? If so, what are the correct steps (l…

I'm using, TV Box Name: X96 mini CPU (example: amlogic s905w): amlogic s905w Armbian build file name: Armbian_20.10_Arm-64_focal_current_5.9.0_desktop.img.xz DTB file used: meson-gxl-s905w-gxl-s905w-p281.dtb During the boot time stacked(freeze) the screen.

Hi, my previous Armbian (21.08.1 focal 5.10.60 desktop) was successfully installed to emmc. (install_aml_gxl_emmc.sh) After I tried the latest firmware (Armbian_23.02.0-trunk_Aml-s9xx-box_kinetic_edge_6.0.12_xfce_desktop), I felt a big change in speed. The problem is, I've tried several times to move it to emmc and it always fails to boot. (install-aml.sh) Any suggestions I need to look into before running the script again? Thank you

I have problem with tvbox x96 mini (s905W) armbian not starting correctly. I have only this https://ibb.co/r5XVkwmvv . Why? I did everything correctly but I have this error list only. What gone wrong?

Hello, i think i bricked my H96 Pro Plus, like a year ago i installed Armbian on it. Today i flashed a SD with a new version, reinstalled octoprint etc and finally tried to burn it to the emmc using "./install-aml.sh" it seemed to work the process ended and i powered it off, removed the SD and tried to boot it up. The only thing i see is the H96 Pro+ Logo and thats it. I tried to boot from the SD Card again but it didn't work. I reflashed the SD card, changed the dtb file etc, just to make sure it would boot normally but nothing. Im at that point where i think its bricked and i need to do some maskrom magic but i have no idea what to bridg…

Hello to everyone, i have a China no name tv box with s905 cpu. I try to install armbian but no success, don't have any experience in amlogic procedure. Can anyone point me to the right img file and some instructions please. My box is named as mxq pro 4g but i know its a fake one. Thank you very much.

I can't boot into the armbian. It hangs at "waiting for a root file system", and repeats the line many times. Then says "Give up waiting for root file system device. Then, " Alert UUID=UUID-number-here does not exist, dropping to shell". It is armbian 24.5 image and dtb file is /dtb/amlogic/meson-sm1-sei610.dtb. I created the u-boot.ext from u-boot-s905x3 file. What I am missing? I tried to stop the autoboot, but it starts with 0 and doesn't even count. Here is the screenshot https://imgur.com/a/9dYm2B9

Good morning all, I share my Armbian experience on the Beelink GT-King Pro, and therefore after several tests where the system often ended up frozen, I currently have a stable armbian system running. I was able to install my web-server at home (Yunohost) and everything seems to be working fine .. So I share : I used Armbian_20.10_Arm-64_buster_current_5.9.0.img from https://users.armbian.com/balbes150/arm-64/? which I flashed on a USB key I recovered the meson-g12b-gt-king-pro.dtb file from the last Manjaro Manjaro-ARM-xfce-vim3-21.03.img I recovered the uboot.ext file on the debian 5.10 build by @darkstar => http://forum.bee-link.com/forum.php?mod=…

Dear all, Ok ok, I realize my previous post with $100 for this task is a bit low. Please do keep in mind, that this is only my personal hobby project. With that in mind, I hereby offer $500 to anyone, who can update the DTB file to work with the current version of Armbian. BTW, I have a freelancer.com account with a 5.0 rating as employer (as well as freelancer): https://www.freelancer.com/u/LeHawkDeLaNight - I can start a new project for you there, so there is no doubts about getting payed the $500. Thanks again, Roy Original post: Dear all, I have an Android TV-Box which is not a co…

Hello, I'm trying to start ARMbian in my new TX3 mini (Amlogic S902w)...but I'm always having trouble in ARMbian boot. It always says Kernel Panic - not syncing: Asynchronous SError Interrupt. Following by a message that says CPU: (u-dev-worker) Not tainted 6.1.63-current-meson64. I tried an old images of ARMbian that I found in YouTube videos, but without success. The error changes the way that the message appears but its always this Kernel Panic in CPU.. I don't know if I'm doing something wrong, I'm trying so many DTB's with all these 3 u-boot.ext, but without success. I don't know if I should change the BOOT ARGS in extlinux.conf. There's so many doubts. Doe…

Trying to figure out how to initiate toothpick mode in order to flash a minimal iot Armbian image. I found a recovery1 button (accessed from a pinhole) but holding this while powering on, or holding the 'power' button while powering on, doesn't seem to get me anywhere. It seems that whenever I insert my 32G sdcard (maybe not supported?), something happens where the stock android does not boot after the initial MINIX splash screen, but just sits on a black screen (regardless of how I may have powered it on). Initially I thought it was doing something, so I let it run overnight.. I restarted it in the am, but when I removed the SDCard, it just booted…

Hi, I am trying to install/boot latest Armbian Jammy minimal on Tanix TX3-H box without success. Technical Details: Box: Tanix TX3-H (BZ) CPU: S905X3 Memory: 4 GB Storage: 64 GB Box: https://androidpctv.com/review-tanix-tx3-s905x3-opinion/ Board Images: Attached I created bootable both usb and sdcard but the box boots into a dark blank screen. I followed the Amlogic boxes instructions but no luck. Tried the different DTBs from the Meson SM1 series, none booted up. Any guidance on using Armbian on this box will be very helpful and appreciated 🙏

Hi! Is it possible to install this assembly on Ugoos AM3 S912?

This issue is specifically about an issue where 'sometimes' a box will fail to boot off of emmc (after having booted successfully previously). The workaround is to boot once from SD card and then the emmc boot generally works fine again. I am starting this thread as a central place to discuss this issue that has been reported by a few people that I know. @lgranie and @robertoenr both have reported this problem either recently or in the past and I see it myself frequently. It would appear that something is getting set in the uboot environment that is causing the boots to fail and fixed/cleared by a boot from SD card. I haven't had time to look…

Hi, I installed armbian on the emmc of Magicsee N5+, it work very well. But after kernel update, I'm unable to restart the emmc system .... I tried 5x on the 3 last month, and I always have the same issue .... Is there any solution ? Maybe it links with this error message after update :

Hello. Please tell me how to set armbian to X98 Plus CPU "Amlogic S905W2 64bit Cortex A35" Tried to put S905W but it doesn't work anyway.

Hi, I want to make step by step and I am reading all post that I can't, but I have not information about this. I can use linux commands, but I am a newbie. I have download and flash a micro sd as this links steps (I think there are the same what I have read in several posts here: https://i12bretro.github.io/tutorials/0269.html Firmware donwloaded from https://forum.armbian.com/topic/17106-installation-instructions-for-tv-boxes-with-amlogic-cpus (https://es.sbcmirror.org/dl/aml-s9xx-box/archive/) This one: Armbian_23.11.1_Aml-s9xx-box_bookworm_current_6.1.63_xfce_desktop.img.xz Checked SHA256 And flash Boot is ok with armbian. …

HI, I have another post about Mini MXIII-II (if you have it, please start reading this post: My next step, as @SteeMan said me in that post, is to check "all" things in the SD card before installing armbian to the emmc. I have detected problems with audio and bluetooth. HDMI, WIFI, USB, LAN seems to work. If you will check anything more, please, tell me, thanks. My question is about... I think that hardware is defined in the DTB file, so ... could I check one by one "all" dtb files? (I mean only ones that have S905X in their names). does it make sense? Any other DTB file that I could test? Thanks.

Hi, I would like to maintain the kernel version updated on the box (for video reading performance because I still got some stearing when the camera moves horizontaly). Now that there is no more support for amlogic (I can understand why reading the forum), can I use the available bullseye/linux-image-current-meson64 package from the armbian repo (which is now 5.9.6 not 5.9.0)? As I understand is it not that easy to compile a kernel by myself because there is so much patches applied. Best regards, Laurent.

my board S902x I have download Armbian_20.10_Arm-64_bionic_current_5.9.0.xz from https://disk.yandex.ru/d/_rQgn_FosYuW0g/20.10/20201014 I extract xz -d Armbian_20.10_Arm-64_bionic_current_5.9.0.xz then burn using balena some changes are extlinux/extlinux.conf LABEL Armbian LINUX /zImage INITRD /uInitrd FDT /dtb/amlogic/meson-gxl-s905x-p212.dtb APPEND root=LABEL=ROOTFS rootflags=data=writeback rw console=ttyAML0,115200n8 console=tty0 no_console_suspend consoleblank=0 fsck.fix=yes fsck.repair=yes net.ifnames=0 boot.ini become ODROIDN2-UBOOT-CONFIG if test "${devtype}" = ""; then setenv devtype "/dtb/am…

I purchased this fake clone TV box of the classic Tanix TX3 Mini 2GB Ram 16GB Rom for around 20 dollars (including shipping). I discovered that the soc is S905L2-B and before bricking the card with attempts to install it on eMMC I wanted to know if anyone of you found a firmware for this TV box compatible with the Amlogic USB Burning tool. On the internet I only found two tx boxes that mount the S905L2 soc and they are the X7 5G and ipbs9505 and I couldn't find firmware to try to load them on my tv box, it's difficult on the Chinese forums for me to be able to find the downloads. Any advice is welcome because with boot from the SD and the armbian-d…

Hello everyone. No matter how much I try, i can't find any combination capable of successfully flash armbian to my emmc. I have a 16Gb ROM 2Gb Ram nexbox a95x. I am using balbes150 images from https://users.armbian.com/balbes150/arm-64/ And i try to follow this manual https://forum.armbian.com/topic/17106-installation-instructions-for-tv-boxes-with-amlogic-cpus . So, we have 3 vars that i must find the perfect combo to work and I am here asking for help on those, assuming i am trying with the right armbian images.and this 1 - what uboot.ext shall i use? » u-boot-s905, u-boot-s905x-s912, u-boot-s905x2-s922 » …

Hello !! I ordered a box tv H96 MAX X3 With this configuration : -CPU: Amlogic S905X3 quad core BRAS Cortex A55; -GPU: ARM Mali-G31 MP2; - OS: Android 10.0; -Memory: DDR3 4GB, eMMC 32/64GB/128GB -Support: H.265, 8K @ 24fps, 4K @ 60fps, HD 2.1, USB3.0; -Support 10/100M/1000M Ethernet, 2.4 and 5G dual Wifi,BT4.0; I'd like to install Armbian on it to use it as a mini server. Except that I'm a complete idiot when it comes to computers, and I've tried to follow tutorials I've already seen, but I can't get the hang of it. I can't really find the right image and I don't really understand how to do it. When I try on my own and plug …

Proper way to install Armbian linux on H96 Pro Plus s912 or equivalent CLI ver. for those who have trouble in their existing systems. I have been installing/testing on my old dusty H96 pro plus Armbian Linux tested both flavours Debian and Ubuntu from almost all sources nothing works 100% on emmc except one source and installing method which i will mention below. Problem faced: Even correct SDcard burn with proper uncomment dtb for s912 and rename correct uboot as mentioned all over the forums: - installing on emmc problem, system halt on reboot/shutdown/power on/idle, Ethernet disconnection, no WiFi even with correct ath10…

I've been trying to do this for about a month already, just subscribed because instructions were so messy (and found a lot of closed+deprecated threads that simply could'nt follow up) I can't find these files: They are nowhere. Followed instructions from almos every thread/tutorial, even the closed ones that point to a newer one to no avail. ¿What am I missing?

Loving this project. Hats off to Balbes150 and all. I can't fathom the effort it has taken to get to here! I have a Sunvell T95Z plus with a S912 processor. I can boot Armbian_20.02.0-rc1.037_Aml-s9xxx_bionic_current_5.5.0-rc6_desktop_20200205 from SD card. Using any of the following dtb files: Meson-gxm-vega-s96 Meson-gxm-khadas-vim2 Meson-gxm-nexbox-a1 Meson-gxm-q201 Meson-gxm-q200 All seem to work and boot to the desktop and play the test video. But I am hitting the common ethernet and wifi failure. Meson8b-dwmac c9410000.ethernet eth0: no phy at addr -1 Meson8b-dwmac c9410000.ethernet eth0…

ey i have a SDMC DV8040 stb ,SoC-Amlogic S805X,CPU-Quad-core 1.2 GHz,GPU-ARM Mali-450,RAM-1GB,Storage-8GB it currently runs custom made android 9 i want to install Armbian linux to it .. i tried almost every youtube video methods to install but none of them worked .. but i was able to serial communicate with it but functions are limited ..please help me

Friends, as shown in the image, I am trying to install a Linux system on this BTV: OTT BOX, model B11 with an Amlogic S905X3 CPU. However, I am not succeeding because it cannot read the USB drive. I have already tried changing the .ext, attempted to burn the image using Rufus, Balena, and nothing worked. I am using a Multilaser USB drive which I believe is 2.0. At the moment I don’t have another USB drive or memory card to test. Any suggestions?

Hello everyone, I own this android box and I followed this tutorial https://ragone.dev/post/install-linux-on-android-tv-box which is based on tutorials on armbian website, I tried to install Armbian 25.8 server with Debian. Everything went fine until the step "5. Flash Armbian to the internal eMMC", despite me running the install-aml.sh script and getting a complete message in the end (see following images for script execution output), when I reboot it just always starts from the sd (see the following screenshot showing that the mounted storage is 16 GB, but my box internal storage is 8 GB). fdisk -l output to also show the i…

Hello. I have easily managed to get armbian up and running of a usb stick, in fact everything worked perfect (hdmi, wifi, gbit ethernet, etc.). The tv box is h96-air-gbit (as the dtb is named), amlogic s905x3 soc, 32gb mmc, 4gb RAM, gigabit ethernet, 2xusb 2.0, 1xusb 3.0, sd card, hdmi, av port (reset button inside), spdif. The thing is, I wanted to benefit from the 32gb internal mmc storage, since I was running armbian from a 8gb usb stick (had a lot of those hanging around, and didn't want to buy a bigger one). I did notice the image I used had not armbian-install script, nor nand-sata-install. I did a manual install (snapshot copy) of my current system with the help of…

I installed the latest version on an armbian sd and after the update and upgrade it doesn't start anymore. At the end, the terminal shows the following:ln: failed to create hard link '/boot/initrd.img-6.1.0-meson64.dpkg-bak' => '/boot/initrd.img-6.1.0-meson64': Operation not permitted update-initramfs: Generating /boot/initrd.img-6.1.0-meson64 The version used is from here:https://github.com/armbian/community-aml-s9xx-box📁📁kinetic-edge-xfce-1319M-6.1.0. I am also attaching a picture. Can someone help me what I need to do to be able to update && upgrade?

Hello everyone, is there any way to boot from USB when my emmc is dead? this is my board

Hello I have a vontar x3, S905x3 tv box and I have installed the latest Armbian 24.11.0-trunk.66 Noble Gnome version. If I made an apt upgrade the box does not boot. If I freeze Armbian Kernel Update through armbian-config utility (freeze update of armbian-firmware linux-dtb-current-meson64 linux-image-current-meson64 packages), I can make apt upgrade and the system boots and working fine. Is the above behaviour normal or I am missing something? Thank you in advance.

Hello and thanks for this great posting. I have a Tronsmart Vega S95 Telos. The boot logo from AmLogic says simply S905 and that matches my understanding of the unit. I managed to boot Armbian from the SD card using the reset button. I played with it for a while and all seemed very good. So I went ahead and executed the /root/install-aml-s905-emmc.sh script. In general it seemed to work. Took a huge amount of time, especially in copying USR. But it did complete. However, when trying to boot thereafter all I get is a black screen for many minutes. Finally, I gave up and pulled the plug. Has anyone any idea what I might be doing wrong here? Thanks so…

Hi there, I'm very knew to this forum. Yesterday I successfully installed armbian 20.10 on my bqeel M9C MAX on sd card following this thread (https://forum.armbian.com/topic/12162-single-armbian-image-for-rk-aml-aw-aarch64-armv8/page/48/) I had no desktop manager available and tried several times to fix it by installing xfce4 and lightdm but with no success (I always had "xserverrc x not found" error). After that I accidentally run the script install-am.sh which properly completed the installation. After removing the SD and reboot I can no longer access Android :-o I surely went wrong running the script. The question is: there's any possibility to fix …

Does anyone know what is the real specs of this board. I try to boot armbian in pendrive into it but it always boot to the android system or in recovery. I try the different device tree but it always the same result.

It is now 2 weeks I run linux-image-current-meson64 with no problems. I manage to get rid of tearing while playing video with vlc by using wayland/weston instead of X11/openbox (picom did not help). While playing video cpu goes from around 40% in X11 to 20% with weston \o/. You can find vlcd.service, scripts and config files in attached files. TODO list : - Move vlcd.service to weston.service and try to replace vlc-xxxx.sh scripts with ~/.config/systemd/vlcd.service - format /boot in ext4 vlcd.service vlcd-start.sh vlcd-stop.sh weston.ini vlcrc.wl

Hi Guys, I was trying to install Armbian in a couple of boxes buit I had no luck. One is a SEI500W from SEI Robotics with AML 905X2 and the other is a Sagecom DIW 585 with AML 905X I followed the process and after trying to boot to recovery they start Andoid tv as normal (just takes more time). In the other hand I was able to run EMUELEC (Gaming emulator) on both devices with an image on SD so I'm assuming the problem is not a block. What do you think? Is there any ideas to try? Thank you in advance!

@hexdumpI have a s905x box with secure boot enabled, I can run armbian from usb drive with your chainload uboot, and trying to run it on emmc. It looks like both chainloaded mainline uboot and armbian cannot find any partitions from emmc. My box have secure boot enabled so there is no way to replace the original u-boot. I have no idea how to deal with that.

Hi, I am returning to Armbian after quite a few years. I was trying to follow guidance from nexbox-a95x-armbian and after a search found the debian & Ubunt images (https://www.armbian.com/uefi-arm64/) which I downloaded and wrote to a USB using Rufus (also balenaEtcher). I then tries to look at the FAT32 partition contents but the GPT was corrupt - tried many windows tools and Linux.I "repaired" the GPT using Linux tools but then the FAT32 filesystem was corrupt. What am I doing wrong? any help much appreciated

Can this Community build upgrade by running apt update & apt upgrade?

I have a X96 air P1 TV box，I burn Armbian_20.10_Arm-64_focal_current_5.9.0_desktop.img to SD card and rename u-boot-s905x2-s922 to u-boot.ext it boot successful (use meson-sm1-sei610.dtb)，when I was run /root/install-aml.sh write the systemOS to emmc it also can boot successful，but the wifi and hdmi audio don't work，so i search from google and download a new u-boot file name with u-boot-new，I copy the u-boot-new file to SD card and rename it to u-boot.ext then insert the sd card to tv box, the wifi and hdmi audio work great, I'm very excited, but when I run /root/install-aml.sh again, the tv box boot failed , it endless echo "missing envitonment variable: bootfile" and "…

my device is using amlogic s905 U-Boot 2015.01-ge1b7b3f-dirty (Jul 22 2017 - 16:51:56) Linux version 3.14.29-g9b417e7-dirty (wulinkui@A23131934) here is the detail, device has been rooted https://pastebin.com/H7NskL64 I have make bootable my sdcard with Armbian_5.89_Aml-s905_Debian_buster_default_5.1.0_desktop_20190617, but maybe original firmware doesn't support multi boot, which one that compatible with my amlogic and how to do that. I have read there is 2 method to make multi boot, toothpick and and update mode of the standard firmware I have try to dd if=u-boot.bin of=/dev/block/bootloader it won…

i have burn images armbian latest desktop version from official armbian website. but after finished burning, not showing Boot partition as usual. i have to change dtb file with working one from original dtb board.

I've just started looking into installing a Linux distribution on my X96 Air P3 with 4 GB RAM and 64GB eMMC, but as it seems there is a lot of conflicting info around, especially concerning the gigabit ethernet port that is supposedly only working with 100Mbit/s? Is there any tutorial on how to get started and choose the right image + proper DTB? The intention is to install to the eMMC and use the box as a small home server exclusively

Hello, I am a owner of a Nokia streambox 8000. I have been trying to install Armbian on it, but without luck. The board specification of the tv box: Board: Amlogic S905X3 ARM Mali-G31-MP2 I have been using the images from here: (external link to site not affiliated with Armbian). I tried the S905X3 jammy and bullseye versions. The installation procedure that I have been trying out is as following: 1. Download armbian_s905x3 img from github repository releases. 2. Use balenaEtcher to burn the image into a USB stick. 3. Once burned; Open the BOOT drive. 4. Rename u-boot-s905x2-s922.bin to u-boot.ext 5. Edit …

So, I'm got this "old" TV BOX as a gift, and I'm try to do something with this ... Now I have booted image for Odroid C1 (after 2 or 3 days work) Req. HW mod: - two resistors / wires for working console are needed - pics later HW & SW info: TV Box Name: Sencor SMP 5000PRO CPU: amlogic meson8b (s805 ??) Armbian build file name: Armbian_25.2.1_Odroidc1_bookworm_current_6.12.13_minimal.img.xz DTB file used: meson8b-odroidc1.dtb Kernel Version:6.12.13 Distribution Installed: bookworm Working Ethernet (Yes/No):??? Max Ethernet Speed that works: 100 Does wifi work (Yes/No): ???? Doe…

Hello! Can someone help me with installing Armbian on this tv box: eu.strong.tv/en/products/ip-tv-receivers/leap-s1 ? This does not have the recovery button in AV slot so i am accessing the android recovery boot through adb from my pc. But the "apply update from sd card" doesnt have any files. I can see the folder structure on the sd-card but i dont have any file to choose. I am using this build: Armbian_23.5.1_Aml-s9xx-box_bookworm_current_6.1.30.img. I also have chosen the correct u-boot.ext file. Thank you in advance!

I have box Ugoos SK1 use chip Armbian S928X-K. how I can install Armbian for it. can you share ROM for it Best Regard

Hello all, I'm new member on this forum and I want became new user of armbian to install Home Assistant on my box. My box is a Bqeel K12 but i opened box and I see a label on the mother board where is write Mini M8S pro C. So I try to install armbian debian. I used this version "Armbian_23.5.1_Uefi-arm64_bookworm_current_6.1.30_cinnamon_desktop.img" I followed this topic to find the good dbt file : https://forum.armbian.com/topic/17106-installation-instructions-for-tv-boxes-with-amlogic-cpus/ I found differents dbt files which look like working properly (I have the desktop, I can navigate, open application...) BUT at each time is not pos…

Hello everyone! My sound is only output via hdma, there is complete silence via spdif. And I need spdif specifically Any ideas on how to fix this? My tv-box is H96 max x3, I boot up via the Ugoos x3 device tree. Who has sound via spdif on a tv-box with Armbian? On which tv-box exactly?

I would be immensely if anyone bright enough to help me. I have an android TV box running Android 7.1 on a S912B Mygica 1960. I have tried for days a while back to get this device to boot up with Ubunta and have given up. I opened a case about this some time ago, and have actually given up and now I am tackling it again. The issue, I have let it be via the android os - updates (which does not detect any files) or using the toothpick reset method which gives me the option to select aml_autoscript.zip. Running this results in the following error 21 (see below); — No package file selected. -- Install /sdcard/aml_autoscript.zip Finding updat…

Hello there, I followed from afar the advancement of the support on TV boxes for a while already, and I happened to stumble uppon a very cheap one on my local market. The specs are the following : -Amlogic S905W -2GB of ram -16GB of EMMC Following are some pictures I took, that shows the bare PCB. I hope that it will help answering questions I have. After looking into many written tutorials on getting armbian to boot on such machine, I have tested all .dtb files that are available, as long as quadruple-checked the u-boot file that needed to be used with that specific chip. I made sure to also press that buttom behind the j…

Hello everyone, good morning! I own a Super Console X2 Pro (https://a.aliexpress.com/_mNgWh7z) and I am trying to install Armbian on it to use it as a server. I followed the tutorial from the forum, but I can't get it to boot into Armbian: To attempt the boot, I am using an Android terminal app with the command: su reboot update But it always goes to the recovery screen. I also tried through the update app, but the USB drives or SD cards I used do not appear in the Android TV Box, even though their folders show up in the recovery menu. I am attaching screenshots of all the information I found relevant to solving the p…

Hi, I plan on installing Armbian_20.10_Arm-64_bullseye_current_5.9.0.img.xz on my rather old wetek play 2, to be used as a home server. I just want to confirm, I have been trolling through the forums that this version appears to be the latest one that can be installed? Am I also correct in assuming debian is more stable than ubuntu? Since majority of my containers are networking related, this is what I value most above, bluetooth wifi etc...

Hi everyone! my name is Maximos and i want to install armbian to H.265 mxq pro 4k 5g armlogic TV BOX and i can't find a topic for my tv box (!!!!!!I'M NOOBIE IN THIS AREA!!!!!) can someone help me? 😅😄 Thanks for your replies and sorry for bother!!! Thanks✌

Hei there I have a MXQ PRO 4k Leelbox and I'm it using with Armbian_20.10_Arm-64_focal_current_5.9.0_desktop.img.xz /dtb/amlogic/meson-gxbb-nexbox-a95x.dtb $ uname -a Linux arm-64 5.9.0-arm-64 #20.10 SMP PREEMPT Wed Oct 14 12:04:42 MSK 2020 aarch64 aarch64 aarch64 GNU/Linux Also other meson-gxbb dtb files are working. More specs below if needed that I can't fully confirm Spoiler Leelbox MXQ Pro Android TV Box Kodi 16.0amlogic Android 5.1 S905 chipset quad-core 1GB RAM 8GB Flash Wi-Fi support Chipset: Amlogic S905 Quad Core Cortex A53 @ 2.0GHz GPU: Penta core Mali-450 @ 600MHZ + Flash: 8GBNAND Flash SD…

I use the x96 air 2g_100m (s905x3) version. I used Armbian for amlogic(bulls_eye, xfce) boxes as specified in the tutorial here. I tried with many dtbs, (it even had one named x96 air) all of the didn't work. So I tried the u-boot.ext file from this Manjaro for Arm tutorial. (The link for the archive). This combined with 'meson-sm1-x96-air.dtb' file worked great and I was able to boot from SD card without any hiccups. And for the first time, the onboard wifi was working flawlessly. I could only get it to work with Coreelec before. With this, I decided to write it to emmc . I used the 'install-aml.sh' to do this and it completed successfully. But when I rebooted from em…

Hello, I'm new to embedded linux installation, so please bear with me. So I purchased an android tv box labeled h96max S905L3 from TEMU. Specifications (if the label is trustworthy): RAM: 2GB, ROM:16GB, running android 14.0. On the pcb it says: s905_zx02_v01. It features an ethernet port, 2 USB, HDMI, AV port (looks like a headphone jack) and no hidden reset button or sd card slot. I was trying to install any kind of linux to it using a bootable usb, I just need a simple shell capable of running an http server. I have tried using the remote control to trigger boot to linux, but nothing works. I have then opened the thing, and connected uart to a RP2040 and wrote a simple …

Since some upgrades ago, the wlan0 stopped showing. Maybe it got jealous of the usb wifi dongle. They used to play along as wlan0 and wlan1 but that is no more. https://paste.armbian.com/zokubeduxe

My tv box: x96max 2+. Cpu: s905x3. Gpu: mali g31. I found the suitable Armbian here: https://forum.armbian.com/topic/12162-single-armbian-image-for-rk-aml-aw-aarch64-armv8 I installed the Armbian_20.10_Arm-64_focal_current_5.9.0_desktop.img to tv box. It works. But the picture quality is not good enough and hardware decoding is not used when playing video. The panfrost driver is used for mali g31. I would like to try some other driver. In the Ubuntu repository I found the following packages: mali-midgard-dkms mali-t62x-x11-driver mali-t76x-x11-driver The mali g31 family is bifrost. In the Debian wiki I had read th…

I’m using the DEVMFC version [https://github.com/devmfc/debian-on-amlogic]. Additionally, I took the `/boot` partition and copied all the files from the Devmfc_Ubuntu-Oracular_6.12.11-meson64_Minimal-25.01.24.img.xz image. Then, I downloaded the same version available from the Armbian community, but with a graphical interface: Armbian_community_25.5.0-trunk.4_Aml-s9xx-box_noble_current_6.12.12_xfce_desktop.img.xz. I first flashed the Armbian image onto a USB drive. Then, in the `/boot` partition, I moved all existing root files into a `/backup` folder. After that, I copied the files from the DEVMFC version into the root of the `/boot` partition on the USB driv…

The latest releases of armbian 23.01 with kernel 6.1 do not run from SD cards on the HK1 box S903x5. If I use USB flash, armbian starts. At the same time, old releases of armbian with kernel 5.9 from balbes150 run from SD cards - but the image with a green background. If you rename U-boot.usb to -boot.ext on the old release 20.10, then USB flash starts and the screen color is normal. Renamed u-boot-s905x2-s922.bin in u-boot.ext - does not help. I've tried a lot of u-boot.bin to try to boot from the SD card. (there is no suitable one). Tell me, please : how to build U-boot_HK1.bin with the correct parameters for HK1 box s905x3 - what w…

528/5000 Hello Tv box: mxqpor 4k s905x 2/16 p212 I used the script to install armbian on internal memory an and works partially because tv box boot from internal memory but without sd card the system does not start I deleted all files from the boot partition from desktop environment and now my tv box freez on amilogic logo. i have tried to rum armbian from android recovery using ext> sdcard> aml_autostart script but i get error cant find / misc! sd/block/mmcblk0 to /sdcard read only is there a way to fix it or do i need flash firmware?

Hi, newb on this board, am so stuck with this box I had no choice but to register. I can run "LibreELEC-LePotato.arm-9.0.2.img" from usb without problem. I can also run "Armbian_5.44_S9xxx_Debian_stretch_3.14.29_xfce_20180601.img" without further meaningful problems. trying to get this MXQPro 4k (S905XQ p212 8gb) running with Balbes150's last 20.10 Armbian but without any meaningful progress. As per Instructions/FAQ I copied u-boot-s905x-s912 to u-boot.ext also edited extlinux.conf label Armbian_S905X-p212 linux /zImage initrd /uInitrd fdt /dtb/meson-gxl-s905x-p212.dtb append root=label=rootfs rootflags=data=writeback rw console=ttyAML0,115200n8 co…

Hello, This is my first post here, I don't know if this the right place, I just want to know if it is possible to install armbian on an M8S+ tv box, it has a amlogic s812 chip. I already downloaded the image file from : https://users.armbian.com/balbes150/s8xx/ I just want to ask if I have only to follow this guide of there is other things I need to know https://docs.armbian.com/User-Guide_Getting-Started/ thank you

Hi, I'm new to the Armbian community, but I have used Linux before. Recently, I followed this tutorial: https://i12bretro.github.io/tutorials/0316.html to flash Armbian 20.10 Bullseye on what I suspect is a fake TX3 Mini. It has a red motherboard probably not a p-281 board, it could be a q201_N device as twrp said before installing Armbian. Anyways, Armbian detects 1 GB of RAM and 16 GB of internal storage in it. It most likely has either an S905X or S912 CPU since I used "u-boot-s905x-s912" during the process. After flashing the SD card with Armbian, I was able to boot successfully. I then installed Armbian using the terminal with "inst…

Hello everybody, My Box is a oxtagon shaped t95z plus 2 mb 16 mb chipset: processor arm cortex -a53 mali T820 GPU AP6255 wifi ac + bluetooth 4.2 sandisk SDINAD1F4-16G 16G emmc 16G rom lanson L5TC4G63CFR x2 dram 2GB I try to install armbian_community_26_2 _0-trunk.100 aml-s9xx-box_noble_current_6.12.63_cinnamon_dektop.img.xz I use meson-gxm-vega-s96.dtb And u-boot-s905x-s912.dtb copy and rename as u-boot.ext It boots to ash then it stops No asking for password and user I have no clue what to do next I have entered armbian-config but this returns a error Any tips?

Hello everyone, I successfully installed Armbian to eMMC on an Amlogic S805X (gxl_p241 / p241 board). The system boots correctly when I manually start it from U-Boot, but autoboot fails every time. I believe my bootloader / U-Boot environment is not properly configured. During flashing, I only selected the DTB, and I am not sure how the bootloader variables should be set for eMMC boot. if it didnt work ,how to manually install u-boot U-Boot log ----------------------------------------------------------------------------------- USB XHCI 1.00 scanning bus 0 for devices... 2 USB Device(s) found scanning usb for storage devices... …

Hi, I own a Mini Mx III - II (S905X) that I "flashed" with an micro SD with install script. The tv box without any micro sd card inserted boot perfectly afterwards. I keep it but today, after few months I see that I have this image installed: Bookworm 23.11.1 Armbian_23.11.1_Aml-s9xx-box_bookworm_current_6.1.63_xfce_desktop.img.xz I have seen now that we have this version: 25.2.0 Armbian_community_25.2.0-trunk.86_Aml-s9xx-box_bookworm_current_6.6.63_xfce_desktop.img So I have tried to use armbian-config system firwmare update to get up to 25.2.0. After waiting to download and installa pack…

Hi, I've X96 max+ and i want to install home assistant on it. i've reads lots of stuff about it but i don't know what image should i use and what to change in the config files. can anyone give me the exact install file that i need for my X96 that will work and i can install HA? THX

Hi guys, I am new here. I have a generic board powered by armlogic 905x. I have installed armbian on this board with this image : Armbian_21.08.1_Amlogic-GXL_bullseye_current_5.10.60.img.xz. Everything went OK, I could ssh the server, but when let server idle for about an hour, I couldn't ssh again, ping also didn't work, seem like server went on sleep mode. How to solve this problem? Thanks in advance.

I've this old tv box from a brazilian brand, called Intelbras IZY Play, the OEM appears to be SDMC, with the codename DV8038, it uses the s805x SoC. From what I've looked, it should be compatible using the files meson-gxl-s805x-p241.dtb u-boot-s905x-s912 The device does not have an SD card slot, so i'm trying to do it with a flash drive, however, after flashing it with balenaEtcher and doing the necessary changes to the files in my Windows PC, I cannot get it to boot, it justs enters a loop of showing the splash screen, turning off, showing the splash screen, and so on. I'm trying to turn it on pressing the hidden button …

Good evening I am new to the forum and I have a request, who can help me with the wifi solution for my T-TV box S10 Amlogic S912. I have installed armbian version Armbian_22.11.0-trunk_Aml-s9xx-box_kinetic_edge_6.0.9_xfce_desktop with DTB meson-gxm-q200 - mod. Bluetooth works but not WIFI. The chip is Qualcomm Atheros QCA9377. I have no experience in linux. Thank you

I have an Alfawise H96 Pro + Box with Android 7, how can I boot it? When i press the reset button it boots into Android Recovery

G'day all this is my first post here, the title describes the brand model, apparent ram size and storage capacity of my tv-box, I know the chip has to be an S905* because I can boot coreelec with the dtb of s905W, but in armbian's case no luck yet. The device doesn't have an sd slot, however I was able to boot coreelec by using a usb drive and ADB. basically adb-connected to it and issued "adb reboot update". I have a similar device as this guy I think if not exactly the same: https://forum.atvxperience.com/viewtopic.php?t=6432 So what options do I have? Any help is welcome 😀

So i've been using the build: "Armbian_community_24.8.0-trunk.6_Aml-s9xx-box_jammy_edge_6.8.10" and trying to burn it with balenaEtcher. The issue is that when ending to verify and configuring - inserting the sd card into a TX3 Mini (board is v1.6) goes into a bootloop. This does happen with all of my sd cards and flash drives, and no, its not that they're faulting, CoreELEC does flash and boot correctly in all of them. I also did the f3 test, and no issues were found. Something particular that I have found is that macOS does detect very easily the corruption and ejects the drive/card, while Windows just lets it pass "as intended" I'…

Hi im trying to install Armbian on my X96 Max 4g/32g the old threads are all locked so i start this threat to try to get answers. Here user @pcconsult gave the following instructions: now at step 3 "3. Boot on X96 MAX. Insert prepared with image USB drive or memory card. From Android select UPDATE... from applications. Select file From your /Boot/...zip on the bottom. Then press Update." there doesnt seem to be any zip files on the burned image on my sd card that i could choose from when im trying to install the image via the android update menu? (this is the image that im trying to use: Armbian_20.11_Arm-64_bullseye_current_5.10.0-rc4…

Hello, I use armbian on a mecool m8s pro+ but i want now to use a x96 max for usb 3.0 and 1000mb network. I start armbian on a sd card, it's ok but i don't have wired network acces. I try with static and dhcp configuration but i can't ping on my network. I don't understand why ? My x96 max have an amlogic s905x2 with 4G of ram and 64G emmc. I use the file Armbian_20.10_Arm-64_buster_current_5.9.0.img and i've select meson-g12a-x96-max.dtb. Thank you for your help

hello i'm having a issue with my old tx9 pro s912 3g 34gb the problem is the wifi sometime will stop work and when i do a apt upgrade i have to replaced the dtb file because it get delete, i using a dtb file that a user post on github, i wonder if any of you have this issue, it cant be the wifi controller is dying, or my dtb file is wrong

Dear Forum, After reading a lot in the forum I have maganed to run get an Armbian version up on my T95MAx+ tv box with network (normally network was not get recognized). Followed the instructions in the forum With the IMG file: Armbian_23.02.2_Aml-s9xx-box_bullseye_current_6.1.11.img.xz but tested several DTB files untill the file (/dtb-6.1.11-meson64/amlogic/meson-g12a-sei510.dtb) got me network up with DHCP getting an IP from my router. Run the armbian-install and all went well. but.... I bricked the box, because after shutdown, the box is not booting. Only get a black screen. Now I need any help to: 1- Flash bac…