Amlogic meson

according to here 5.13 is latest kernel https://www.armbian.com/odroid-c2/ but when I issue: sudo apt-get update && sudo apt-get dist-upgrade -y I'm still on 5.10....

Hello. Is worth to try this branch https://github.com/moonlinux/linux/tree/odroidc2-3.14.y-rt in order to build a realtime kernel upon https://dl.armbian.com/odroidc2/Debian_jessie_default.7z ? Thanks. Managed to install this https://github.com/moonlinux/linux/tree/odroidc2-3.14.y-rt , but the latency test is pretty bad: $ sudo cyclictest -t1 -p 80 -n -i 10000 -l 10000 -N # /dev/cpu_dma_latency set to 0us policy: fifo: loadavg: 0.45 0.33 0.15 2/154 1318 T: 0 ( 1318) P:80 I:10000 C: 225 Min:1000000 Act: 5962494 Avg: 6220148 Max:15955692

Hello, I apologize, I can not speak English and have to write with google translator! will the mainline kernel master branch 5.1.y bionic and buster be finished before the support ends? so the display on hdmi and the hard disks on usb work and wlan?

Hello Igor, In past threads, it seems a bit argued about the zram module, but will not the zram module be enabled by default on other arm boards? I am using odroid-c2, but it is effective in hardkernel? It seems that it is becoming. If possible, if Armbian seems to have no problem, I want it to be valid. https://forum.odroid.com/viewtopic.php?f=136&t=20116 $ grep "ZRAM" /boot/config-3.14.79-odroidc2 CONFIG_ZRAM=y # CONFIG_ZRAM_LZ4_COMPRESS is not set # CONFIG_ZRAM_DEBUG is not set $ lsmod | grep zram $ cat /etc/armbian-release # PLEASE DO NOT EDIT THIS FILE BOARD=odroidc2 BOARD_NAME="Odroid C2" VERSION=5.31 LINUXF…

Hi, after doing some last changes (hopefully) to Uboot and the kernel, I have some questions on how to get the new Uboot and kernel on eMMC (I can't reinstall everything on a cleanly etched system). I have normal build environment, with mainline kernel and v2017.11. compile.sh gives me a new image without problems. The target system is running nicely on a 128GB eMMC, but how can I safely install the new Uboot and the new kernel to my eMMC? I would really be happy to have one of the experts telling me how to proceed without killing my system Thanks in advance, any help is appreciated. Michael

Hi, I have C4 installed sdcard with bullseye from armbian website and all good first steps, change pass etc, update upgrade, no error on console and reboot from console it simple not rebooting, I need to power off all the time. I tried Jammy just for check that is worked so what is wrong with Bullseye? My armbianmonitor -u is at http://ix.io/4cyZ

Hi, I use the C2 connector J2 signals to control power distribution for several attaches devices. A n-channel MOSFET is driven by a GPIO signal, with pulldown (3k3) to ensure that the n-channel MOSFET is off, - as long as the GPIO pin is in tristate or input state. I considered this to be the case for all "normal" GPIO lines (except I2C and SPI). I see now that after powerup, at least GPIOX_5 is active and switches on my load until I can export the GPIOX_5 and drive it low. Does anyone know if the GPIO lines are driven actively after powerup / reset? And if so, can this behaviour be changed in U-boot or kernel environment? The philosophy of t…

Hi. Running Armbian Buster on Odroid C-2, Linux odroidc2 5.4.35-meson64 #trunk SMP PREEMPT Thu Apr 23 18:16:56 CEST 2020 aarch64 GNU/Linux With "armbian-config" I'm triyng to switch to another Kernel without success, error on "switch_kernel.log" file is: linux-image-dev-meson64=20.05.0-trunk.130 linux-dtb-dev-meson64=20.05.0-trunk.130 linux-u-boot-odroidc2-dev Any idea?

TJoe says Thank you!

My NanoPiK2 is installed with Armbian Focal desktop system. When I used it normally for a day, I manually shut it down (closed properly). But when I restarted it, it finally displayed and stayed at [OK] Reached target Host and Network Name Lookups. Unable to enter the system. I tried to insert the SD card into the computer to search for the boot logs, but I couldn’t find it. How do i solve this problem？THANKS

Before I was able to manually send CEC commands to my tv with cec-client. However I'm not sure how it works with Linux kernel CEC implementation. I know /dev/input0 is the node for CEC, I just have no idea what to do in this case. In case of cec-client, I would use the website cec-o-matic, but is there also a site like this for the kernel implementation of CEC? The reason I want this, is because I need to power on a tv with a remote using the odroid.

I only test on my OdroidC2 so this find may affect more. As repeatedly mentioned, the C2 has usb detect issues. For us, a main culprit not discussed yet is the default kernel config. Having both: CONFIG_USB_EHCI_TT_NEWSCHED=Y CONFIG_USB_OHCI_HCD=Y For USB1.1, these should be one or the other, never both. Mainline has: CONFIG_USB_OHCI_HCD=Y and CONFIG_USB_EHCI_TT_NEWSCHED is not set. For the OdroidC2, CONFIG_USB_OHCI_HCD=N is proper. As it has no OHCI and USB2 handles that for us. Forcing the USB power on state has helped workaround this issue, by keeping the driver tied to the device in the kernel.

Hello, Recently I have discovered bug in kernel or maybe iptables with using Huawei E3372h LTE Hi-Link USB dongle (or maybe other devices which exposes HTTP interfaces over cdc_ether). Odroid enters into kernel panic and reboot. I am using ARMBIAN 5.85 stable Debian GNU/Linux 9 (stretch) 4.19.42-meson64. kernel:[ 60.801868] Internal error: Oops: 96000004 [#1] PREEMPT SMP The steps to recreate the bug: 1) disable or remove NetworkManager, use only IPv4, 2) set network interfaces in /etc/network/interfaces source /etc/network/interfaces.d/* auto lo iface lo inet loopback auto eth0 allow-hotplug eth0 iface eth0 inet static address 1…

Hi guys, after some interesting weeks, I could successfully install eight Odroid C2 together with dedicated FPGA hardware now, and prepare them now for deep sea operation. Just wanted to express a big "THANK YOU" to all here in the forum which were involved in helping me to get the beast working. The boards operate now with patches inside Uboot (serial console 9600 8N1) and several small patches inside the kernel (device tree, PWM, ADCs, 1Wire), and a patch inside the rt8152 driver to switch off the LEDs in the USB ethernet dongle (PMTs don't like such bright light usually). 128GB eMMCs are working fine, thanks to the speed patch …

Hi, I broke my /boot on eMMC and my Beelink GT1 is in boot loop. I can't configure u-boot to boot from the SD card to reinstall it. Can you help me reconfigure u-boot to boot from the SD card? Thx printenv bootargs=rootfstype=ramfs init=/init console=ttyS0,115200 no_console_suspend earlyprintk=aml-uart,0xc81004c0 ramoops.mem_address=0x20000000 ramoops.mem_size=0x100000 ramoops.record_size=0x8000 ramoops.console_size=0x4000 androidboot.selinux=permissive logo=osd1,loaded,0x3f800000,576cvbs hdmimode=720p60hz cvbsmode=576cvbs hdmitx= androidboot.firstboot=0 mac=86:48:d8:49:99:56 androidboot.mac=86:48:d8:49:99:56 bootcmd=run start_aut…

Hello, I tried to build a fresh image for the Odroid C2, but always fails with the u-boot.bin. The error is equivalent to the Issue #452 on Github. Anyone else with this problem? Thanks in advance.

Hello, i've experienced eMMC Problems with the latest stable Jessie Armbian-Image for Odroid C2. Thats why i installed Debian_jessie_next_desktop_nightly.7z from the nightly builds. After my first experiences it seems that image is working good since i did all of my configurations over serial console and ssh. Now when connecting my display it's not working. Which is 1440x900p60hz and connected over a hdmi<->dvi Adapter to the board. The device is starting with a black screen and not not detecting any display when i try to start the X-Server manually and there are also no /dev/fbdev* devices. Since the boot files b…

Hi guys, i have a question regarding the installation method of the two operating systems. On my OrangePI3 I booted the operating system from micro sd card and told armbian bionic that the eMMC memory will only be used as a boot loader while the rootfs of the actual operating system is installed on a connected USB stick. Is it the same with the Armbian Bionic for the Odroid C2 version? Or is it the case that the future operating system is written directly to the eMMC memory and booted from there? And then there was the reminder that Odroid C2 does not boot from USB. . . Can I use it as described for OrangePI3?

Still trying to get the wireless working... Followed directions here, and during the "make ARCH=arm64", I get the following: compilation terminated. scripts/Makefile.build:308: recipe for target '/Downloads/WiFi/rtl8192cu-fixes/core/rtw_cmd.o' failed make[2]: *** [/Downloads/WiFi/rtl8192cu-fixes/core/rtw_cmd.o] Error 1 Makefile:1278: recipe for target '_module_/Downloads/WiFi/rtl8192cu-fixes' failed make[1]: *** [_module_/Downloads/WiFi/rtl8192cu-fixes] Error 2 make[1]: Leaving directory '/usr/src/linux-headers-3.14.73-odroidc2' Makefile:584: recipe for target 'modules' failed make: *** [modules] Error 2 Now what???

Can you fix build/patch/kernel/odroidc2-dev/packaging-4.x-DEV-with-postinstall-scripts.patch so we have working image with mainline kernel now it is missing symlink to zImage ln -sf $(basename $installed_image_path) /boot/zImage > /dev/null 2>&1 || mv /$installed_image_path /boot/zImage rm -f /boot/System.map* /boot/config* /boot/vmlinuz* /boot/zImage /boot/uImage And plz add https://github.com/BayLibre/libretech-image-builder/blob/libretech-cc-xenial-4.14-mali-x11/patches/0001-meson_drm_disable_ARGB8888.patch https://raw.githubusercontent.com/superna9999/LibreELEC.tv/Amlogic_GX/projects/Amlogic_GX/patches/linux/00…

I've installed Armbian on a Odroid C4 board (running with emmc storage & connected to the orginal power supply). After a few hours or days, the board crashes & throws an error unable to handle kernel paging request at virtual address 000000000002e82e2... See https://pasteboard.co/NjIo5L6UR0Px.jpg for the complete error message System diagnosis information is uploaded to https://paste.armbian.com/aqahepelav

Hello, I am going start work with Odroid C2. In odroid C2, first need to install OS which they given in site or can i install linux based home automation software directly..?

I can't upgrade armbian focal to bullseye.

Hello, I installed Armbian on my Odroid C2 and need to run a 32-bit application. When I try to run it I get No such file or directory so I tried to install ia32-libs but can't find it for Armbian, even tried to compile the application on my Odroid C2 but it runs out of memory (tried with swap files too but it didn't work). Can someone lend me a hand please? Thanks

Hi, just returned to start working on a FLIR Lepton camera, with Odroid C4, hooked up to SPI (faster than the C2). WIth the official image from download page (Armbian 22.08 Jammy, kernel 5.10.144) I get the following message on console as soon as I try any access to spidev: [ 77.660325] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 [ 77.666930] Mem abort info: [ 77.670400] ESR = 0x86000004 [ 77.673801] EC = 0x21: IABT (current EL), IL = 32 bits [ 77.677915] SET = 0, FnV = 0 [ 77.681367] EA = 0, S1PTW = 0 [ 77.684796] user pgtable: 4k pages, 48-bit VAs, pgdp=000000000f26b000 [ 77.690454] [00000000…

C2 running FAB! http://forum.armbian.com/index.php/topic/2422-more-proper-testing-better-armbian-experience/page-2 Many thanks to Miike for the great wallpapers; http://forum.armbian.com/index.php/topic/2417-armbian-wallpaper-remake/

I cannot find the serial number with Armbian 23.02.2 on ODroid C4. On ODroid C2 with Armbian 22.11.2 and older versions it was readable on /sys/firmware/devicetree/base/serial-number. This does not exist anymore on C4. I do not know if it depends on Armbian version or board type.

Hi, for the Odrioid C4 eMMC v0.4 modules are available. like Spoiler https://www.pollin.de/p/odroid-32gb-emmc-module-c4-811145 Can I use these v0.4 modules in my Odroid C2, too? I didn't find any information about the compatibility. Thanks in advance! Matt

Hi, just to let you know, I changed from "next" to "current", and found some quirks in the "current" kernel (using "buster"). (1) uart_C is not working (already fixed by martinayotte, thanks for the fast response!) (2) microSD card behaves strange: you can boot from uSD card, that works. When booting from eMMC card, the uSD clot is "dead", card insertation is not recognized anymore, it can't be used. Michael

Now checked on Odroid C2 an image 5.76 with MALI and a media script, by a technique with replacement of u-boot, as for K2. Everything works fine. After installing the script, the standard browser began to play video 1080 full screen without brakes. MPV is just as easy to handle any full-screen video. Bonus has an in-house sound via HDMI. There is one caveat when configuring - it is necessary to specify the correct DTB option in the file for Odroid C2 "/extlinux/extlinux conf". 1. Copy of the standard u-boot from the working SD card. dd if=/dev/mmcblkXXX of=u-boot_odroid_c2.img bs=1M count=4 2. Burn the image Armbian for TV Boxing…

Hello Experts, I was hoping to get some beginner help getting my TV's remote control working with my Radxa Zero 2 micro computer running Armbian_23.11.1_Radxa-zero2_jammy_current_6.1.63_xfce_desktop or any armbian OS if there is a better one that can do CEC out of the box. I have installed v4l-utils and cec-utils, but when I use the command cec-ctl there is an error: Failed to open /dev/cec0 I know my Samsung tv/hdmi connection is good and the remote works with my raspberry pi 4 with LibreElec, but it seems like this Radxa Zero does not recognize the HDMI/CEC device and its not installed. The Raspi4+LibreELEC works with my TV out of th…

Hello to all, I have an OdroidC4 with a Hardkernel HDMI Display VU7Aplus. I installed latest image 22.11 XFCE. I think the display size via display data channel is not properly handled. If a lot of text is to be displayed (see pic with the setting of the locale after first login), the lowest lines disappear. So you have to type in the language/continent/country settings blind, because there is no input prompt to be seen. Even when the GUI desktop starts, there is the same issue. When you open a terminal window, the lower border of the window disappears (see pic). Is there a way to configure the display size manually? I also did …

Please contribute if you're affected: https://github.com/igorpecovnik/lib/issues/499

Using a cable such as this one, can we expect Armbian on the C2 to consistently assign the same serial designation to each cable port? It would be nice but probably not? I found this question and this one but I'm not sure what would be the best approach for my application. I'd like to do it 'The Armbian Way' if there is one. How would you ensure that each hardware device is assigned the same port each time? Thanks .

Hi, after getting access to GPIO pins now (thnx to Neil ) I wonder that accessing pins be bash scripts gives me quite different access times. For example, I use one pin to switch a connected device on and off by a MOSFET. Setting the pin low is fast, setting it high takes about two seconds. I use the following shell script: #!/bin/bash echo "0" > /sys/class/gpio/gpio102/value ("0" for off, "1" for on) Any ideas? The pin seems to switch immediately, while the shell prompt takes about two seconds to return - but ONLY in case of "1". The corresponding pin is set to output, of course, before Best regards, Michael …

Hi, maybe someone can give me a hint... I have a running system now on 128GB eMMC card, and wanto to use GPIO. I have /sys/class/gpio/ with export, and unexport files, and two gpiochip0 and gpiochip14 entries. Unfortunately I can't export pins, as export 231 > /sys/class/gpio/export gives me a (as user and root) bash: echo: write error: Invalid argument Any help is appreciated. EDIT: works now. It is somehow a bit complicated, as the "usual" numbers as known from 3.x kernels vanished. Debug output shows two "gpiochips", with a certain number of pins, which you have to correlate to the device tree enums for that "chips" - …

Hello, I using up to date Armbian Stretch with kernel 4.19.41-meson64 #5.85 SMP PREEMPT Wed May 8 12:40:37 CEST 2019 aarch64 GNU/Linux. Today about 2 minutes after system boot I have found this warning in kernel log: May 12 07:51:48 xxx kernel: WARNING: CPU: 1 PID: 0 at kernel/time/hrtimer.c:917 hrtimer_forward+0x88/0xd0 May 12 07:51:48 xxx kernel: Modules linked in: cdc_ether usbnet uas xt_tcpudp nf_log_ipv4 nf_log_common xt_LOG xt_multiport xt_conntrack iptable_filter ipt_MASQUERADE iptable_nat nf_nat_ipv4 nf_nat nf_connt May 12 07:51:48 xxx kernel: CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.19.41-meson64 #5.85 May 12 07:51:48 xxx kernel: Hardware …

Hi, after a very successful deployment last year we will start a new sub sea C2 deployment next year (next to the old installation, in Northern Pacific, down at 2600m). Things work out nicely, but now we reached a state where some help from experts is welcome. I need to include some changes into the filesystem generated by Armbian build system, and hope someone can give me a hint on how to do it best way: - include some packages into the image (list available) - add some files to /etc/udev/rules.d/ - add some lines to /etc/rc.local - have a preinstalled user plus home directory (optional) Any help is appr…

boa noite gostaria de pedir ajuda estou tentando instalar o armbian em placa amlogic s805 e gostaria do arquivo u-boot já pesquisei no forum no site desde já agradeço não obteve sucesso

I am trying to connect a PPS source to an ODROID-C2 board using GPIO. I am running Armbian 19.11.3 Buster, with kernel 5.3.11-meson64. I downloaded the Armbian kernel source for this kernel, added the following to meson-gxbb-odroidc2.dts, and compiled and installed it: pps { compatible = "pps-gpio"; gpios = <&gpio GPIOY_3 GPIO_ACTIVE_HIGH>; status = "okay"; interrupt-parent = <&gpio_intc>; interrupts = <26 IRQ_TYPE_LEVEL_LOW>; }; When I boot and load the pps-gpio module, I get the following error: pps-gpio pps: failed to map GPIO to IRQ: -6 pps-gpio: probe of pps failed with error -22 …

Hi! I try to use GPIO on BananaPi M5 board. But interface doesn't work. Armbian 23.05.1 Jammy with Linux 6.1.30-meson64. /boot/armbianEnv.txt: verbosity=1 console=both overlay_prefix=meson fdtfile=amlogic/meson-sm1-bananapi-m5.dtb rootdev=UUID=d099eb25-cf52-43fb-b826-535b9109637f rootfstype=ext4 overlays=w1-gpio usbstoragequirks=0x2537:0x1066:u,0x2537:0x1068:u m5@bananapim5:~$ dmesg | grep w1 [ 7.568386] w1-gpio onewire@0: gpio_request (pin) failed [ 7.607814] w1-gpio onewire@0: gpio_request (pin) failed [ 7.620109] w1-gpio onewire@0: gpio_request (pin) failed [ 7.662444] w1-gpio onewire@0: gpio_request (pin) failed [ …

Hi, I am trying to get the official Hardkernel RTC board working. This board requires the driver module "rtc-pcf8563.ko" which is not included in the image by default. So I went through the kernel compiling tutorial, to add this module to my "own" kernel, and copy it over to my main system. First problem: the kernel version was different: main system is at version 4.18.8, while the module was compiled for 4.18.20. I could fix this by myself be defining the KERNELBRANCH='tag:v4.18.8'. Second problem: the "linux family" has changed. My main system is at Armbian version 5.60 for family "odroidc2". The driver module was compiled for "meson64"…

I'm using an Odroid C2 and need some newer software packages than those found in the Ubuntu 16.04 repositories, so I installed the legacy (3.14.79) version of the Debian server edition of Armbian, then upgraded it to Debian 9. I've installed xorg, lightdm, etc and now have a very functional desktop. However, I want to install a 3D CAD program that **I think** would perform better if I had 3D accelerated graphics installed. I'm a complete noob when it comes to 3D graphics drivers. I assume they're not installed, as I see this on my Orange Pi PC 2 running the desktop version of Ubuntu: $ lsmod | grep mali mali_drm 2732 1 drm …

Hi all am trying to make a router out of my odroid c2 using the mainline kernel but am trying to configure mini jumbo frames to support my PPPoE on a FTTP line but am getting errors from the kernel when attempting to enable the 1508MTU needed to support it. my question is do these adaptors support jumbo frames on any kernel or is it just the mainline kernel not supporting them.

ODROID C4 : How can I configure SDIO bus on GPIO 40 pins ? I beleave that ODROID-C4 GPIO 40pins supports SDIO bus by SoC GPIO pin configuration. How can I get such pin configuration, that enables SDIO bus on GPIO 40 pins? Are there someone who got such configuration? Thank you .

Hi, I want to change the resolution to a custom setting. In order to do this I changed the /boot/boot.ini file to custombuilt and include the relevant modeline for my display. When I start the odroid, it crashes. I then tried to just use setenv display_autodetect "true" and no preset selected, it also crashes. Perhaps I misunderstand auto_detect, but when I set the custombuilt option with the right modeline, it still won't work.. any ideas?

Is it possible to get it work, with next kenel?

Hi. I want to use CAN interface on ODROID C2 board. I use external CAN-bus controller like MCP2515 via SPI interface. So, i need to enable SPI and CAN-bus peripherals and in kernel. So, could someone explain me how to do that? I know about device tree, but don`t know what to do. Just give me some guide links about device tree management, any examples, etc.

I am running bookworm on a banana pi m2 zero. It comes up properly and connects to Wifi and to the attached LAN adapter, so I can access it via SSH on both interfaces. BUT, when I disconnect the keyboard, it doesn't boot properly anymore and I cannot connect to it. I attached a monitor to take a look at the startup messages and found that it hangs at starting the hostname service (see screenshot) How can I get it to boot properly?

Would it be possible to get a "minimal" build of Armbian based on Ubuntu 24.04 (Noble) for the Radxa Zero 2? Thanks.

I am trying to enable the external antenna on my Radxa Zero SBC. I was assuming that there is a kernel overlay available to achieve this, but unfortunately not. At least I am unable to find it using armbian-config. I am running Armbian v24.11.1 with kernel 6.6.63-current-meson64. Has anyone ever achieved to enable the external antenna? Any hints appreciated.

Hello, Thank you for the great effort of Armbian having community support of this board. I have a Waveshare 4inch DSI LCD with touch that I want to use it with Radxa Zero 2 Pro. They have a device tree overlay provided for Raspberry Pi and drivers for different kernels for RPi And I found a kernel patch that seem to enable DSI here. ********************************************************************** I am using the latest build of Armbian for radxa-zero2 and it's Linux radxa-zero2 6.6.53-current-meson64 When I find /lib/modules/$(uname -r) -type f -name '*dsi*' It shows /lib/modules/6.6.53-current…

I try to profiler the system, but could not find vmlinux binary and kernel debug symbol. The board is Odroid C4, SD card Image is download from armbian website Ubuntu 22.04.3 kernel 6.1.50-current-meson64 Thank you for help

Hi, Armbian_21.02.3_Odroidc1_focal_current_5.10.21 how do I find out which number do I need to provide to gpio export command? Let's say I have physical pin 16, which is labeled by the manufacturer as `GPIOX.5` or `102`. But that doesn't work with Armbian: echo 102 > /sys/class/gpio/export [ 1602.030617] export_store: invalid GPIO 102 How do I know the value to provide for /sys/class/gpio/export? # cat /sys/kernel/debug/gpio gpiochip1: GPIOs 413-428, parent: platform/c8100084.pinctrl, aobus-banks: gpio-416 ( |TF_IO ) out lo gpio-417 ( |usb-hub-reset ) …

Hello. I tried the steps, but my Mecool KIII pro don't run using default conf extlinux.conf: label Armbian_community kernel /Image initrd /uInitrd fdtdir /dtb/amlogic/meson-gxm-mecool-kiii-pro.dtb append root=UUID=3bc7a8b8-73ee-4ade-9030-f3fa965fc27e rootflags=data=writeback console=ttyAML0,115200n8 console=tty0 rw no_console_suspend consoleblank=0 fsck.fix=yes fsck.repair=yes net.ifnames=0 splash plymouth.ignore-serial-consoles But I need choose (unofficial) label Armbian-unofficial kernel /Image initrd /uInitrd fdtdir /dtb/amlogic/meson-gxm-mecool-kiii-pro.dtb #Insert the correct FDT line for your b…

I finnaly found it on google Here is the link: https://drive.google.com/file/d/1gVU-iGhoYALZNok6RMkUzWg0BhXTrWCt/view?usp=drive_link

I have a Waveshare 3.5inch RPi LCD (A): https://www.waveshare.com/wiki/3.5inch_RPi_LCD_(A) Does somebody have this kind of LCD running on a Odroid C2? Is there a step by step? Because the Waveshare or Odroid Wiki is over my head 😟

# uname -a Linux odroidc4 6.6.63-current-meson64 #1 SMP PREEMPT Fri Nov 22 14:38:37 UTC 2024 aarch64 aarch64 aarch64 GNU/Linux Installed latest "Armbian_24.11.1_Odroidc4_noble_current_6.6.60-kisak.img" ...with latest sudo apt update; sudo apt upgrade, rebooted... Hardware: - Odroid-C4 - Sabrent USB 3.0 to 2.5-Inch SATA Adapter; Model: EC-SSHD with latest firmware patch, connected to a Kingston SSD: SA400S37480G # dmesg -l emerg,alert,crit,err [ 0.879290] meson-drm ff900000.vpu: DSI transceiver device is disabled [ 3.402246] systemd[1]: Failed to start systemd-sysctl.service - Apply Kernel Variables. [ 4.327154] panfrost ffe40000.…

I needed a kernel upgrade to be able to run some applications. I value stability over cutting edge features so I decided to try the Debian image. However I detected a few things that are not working properly. 1. USB almost never works. Most of the time my very plain USB keyboard won't be detected. There is an error message right at the start of the boot sequence "Failed to get keyboard state from device[...]". I have to shutdown and start multiple times by plugging off the power cable and I also keep trying different USB ports. Some rare times the keyboard will work though, even with the above error message. Even rarely I don’t see the error message at the boo…

I am unable to get any RTC installed on a C2 with current Armbian. i2cdetect sees the device ID but no joy getting anything to talk to it. Yes, I know these are very old but they were donated to a non-profit and I am trying to help set them up for a project. Current Armbian runs great and perfect for our need. I need an RTC. I have tried both the Odroid PCF8563 (0x51 seen) and DS3231. I have tried all the online blog posts, rebuilt the Device Tree, etc. but can't seem to get things to work. Any pointers would be much appreciate. LInux odroidc2 6.12.56-current-meson64 #1 SMP PREEMPT Wed. Oct 29 13:09:02 UTC 2025 Thanks, Scott

The proposed solution here (https://github.com/armbian/build/pull/4824) basically performs a power-reset of the SDCARD in the final moments in order to prepare for the bootloader's (Uboot) restart. What puzzles me is that the kernel has a Watchdog feature which seems to operating fine as witnessed by the console log "watchdog: watchdog0: watchdog did not stop!" meaning that the watchdog driver has been told to disregard attempts to disable it (which is fine in the context that the watchdog is being used to reset the cpu). The problem is, the watchdog never times-out because, i presume, something is still "kicking the dog" (there seems to be a worker thread tas…

I have tried every one of the latest 24.x images on my newly purchased LaFrite s805x-ac board. NONE worked. They all gave an error about overwriting reserved memory. I randomly chose a 20.x image and it worked immedaitely. I do not currently have time to do further analysis.

Hello I use the odroidn2 build, (slightly patched with dts add patch) for my Dreambox one/two (s922X). My Broadcom Wlan chip BRCM4356A2 is not supported in either etch or current. This patches: https://github.com/armbian/build/blob/master/patch/kernel/archive/meson64-6.0/general-meson-mmc-1-arm64-amlogic-mmc-meson-gx-Add-core-tx-rx-eMMC-SD-SD.patch https://github.com/armbian/build/blob/master/patch/kernel/archive/meson64-6.0/general-meson-mmc-2-arm64-amlogic-dts-meson-update-meson-axg-device-tree.patch prevent that. https://pastebin.com/Cbvd82R8 If I go back to the previous patch: https://github.com/armbian/build/blob/master/patch/kernel/ar…

My buddy gave me his Odroid C4 when he bought a Raspberry and it has been reset for me to use. I plugged it into my new fibre modem. It has access to the internet. I have my PC upstairs with lots of videos I have downloaded. I used to use a WD box to watch my movies. I can't seem to get the new Odroid to connect to the network. I use windows 10 and didn't have a problem sharing files before. Does anyone have idea on how to hock the systems so they will share files??? Rod

hi, i recently created a game that i would like to install over 905x3 tv box, i would like to protect it from copy. is there a way to encrypt the whole ROM without the need of any external hardware or password to be entered each reboot ? tv box launch directly into the game and every possible way to interact with linux is disabled (keyboard, usb, lan) and i only need to encrypt the ROM to make the game more resistent in some extent to copy. i read about encrypted bootloader but i'm not sure if that is what i need. can i only encrypt the game bin with a key that is protected inside the 905x3 ? (beside cpuid as it seem easy to reverse). …

Hi, all I have tested all the bookworm images and they all have the same error. HDMI debugging not working... This is the log uart Armbian_23.5.1_Nanopik2-s905_bookworm_current_6.1.30 Regards npik2-armbian

I just got a mystery box from Ameridroid that contained a ODROID-GO-Ultra. Hardkernel has an old Ubuntu 20.04 image. Does Armibian support this device?