Allwinner sunxi

Good day! Tell me if there is support for hardware acceleration Orange PI WIN PLUS Cortex-A64 ?? I try to run a video (vlc,mpv) but it is very slow =(

After running the armbian-install program and selecting option "1 'Boot from SD - system on SATA, USB or NVMe'" the program transfers the contents of the SD card to the drive (SATA or NVMe). And it works. The problem occurs after booting - a message appears about the device being unable to mount /media/mmcboot . And indeed - the contents of /media/mmcboot and /boot are empty. The problem turns out to be the contents of the /etc/fstab file generated on the SATA/NVMe drive. The mount point /media/mmcboot has a only UUID value, but the text "UUID=" is missing before the value. After manually adding it, everything starts fine. If someone could lean in and correct th…

I have OrangePi Zero and want to use it the following way: 1. OrangePi Zero is connected to internet via Wi-fi 2. on OrangePi's eth0 port is running DHCP server 3. I connect a computer to eth0 port on OrangePi, get IP address via DHCP and access to the internet So internet is provided to eth0 via wlan0. Now, I managed to install dnsmasq, and it is working. Basically my config (/etc/dnsmasq.conf) is: interface=eth0 listen-address=172.16.0.1 bind-interfaces addn-hosts=/etc/dnsmasq/hosts.conf dhcp-range=172.16.0.50,172.16.0.150,12h dhcp-leasefile=/var/lib/misc/dnsmasq.leases IP of eth0 on OrangePi Zero is: ifconfig eth0 …

Hello everyone. I'm new to Armbian. If I do not restart or turn off by command (correctly) all the files generated or transferred since it was turned on are deleted immediately. Why? Is it normal in Armbian? I use Orange Pi Win Plus 2, how do I deactivate that functionality? I use it as a remote server.

I didn't see support specifically for NanoPi NEO-LTS https://www.friendlyarm.com/index.php?route=product/product&product_id=132 Does one of the other images work on this particular board?

My Armbian paste is at https://paste.armbian.com/yamakinoce This is an OrangePi Zero Plus, with an H3, not an H5 or an H2. I see all kinds of problems here but don't know how to fix them. It seems the DTB is just wrong for this board. For one, there are interrupts showing up in /proc/interrupts for HDMI and LCD, but this physical board has *neither* of those. It has an Ethernet PHY but neither the kernel nor uboot see it. It also has a Wifi but the kernel does not see that either. Does a correct DTB exist for this board? What is its name? I vaguely remember a couple ways to force the kernel and uboot to use a different DTB …

I am getting a thermal zone failure message during boot, which has always happened with kernels after 6.6, at least as far as I know. Is this error actually harmful? HardWare:NanoPi NEO2 Armbian Version: Packages: Debian stable (bookworm) v25.2.3 for NanoPi Neo 2 running Armbian Linux 6.12.20-current-sunxi64 Support: DIY (community maintained) Kernel: Linux nanopineo2 6.12.20-current-sunxi64 #1 SMP Sat Mar 22 19:54:28 UTC 2025 aarch64 GNU/Linux dmesg output [ 7.018086] core: _opp_supported_by_regulators: OPP minuV: 1320000 maxuV: 1320000, not supported by regulator [ 7.018125] cpu cpu0: _opp_a…

Hi every one I installed armbian on my orange pi win plus. I want to use all uarts. uart1, uart2 and uart3. uart2 is enabled by default but the others are not. I add "overlays= uart1 uart2 uart3" in armbianEnv.txt but they don't work. Additionally, there is not /alwinner/overlays directory in /boot/dtb. And there are ttyS0, ttyS1,ttyS2 and ttyS3 in /dev directory.. So..How can I enable the other uarts? thank you

Hello, I'm running a OPI Lite with debian jessie, All works fine until i have to reboot, and that happens quiet often while testing software. AFTER the boot i'm not able to reach the OPI via SSH, because the eth0 is activated ...and has a 169.x.x.x ip adress... On the OPI Lite i can ONLY discover WIFI and no eth0 connector...So i go into the "nmtui" tool and "disactivate" the eth0... Than i have access again via the wifi to my OPI lite. How can i completely disable the eth0, that only WIFI connects to my network? I didn't find about this behavior on the web, anyone else have that problem? Kind regards from Hans F4VSJ

Just for information, I have tested ADS7846 touchscreen on new 4.19.y Bionic Orangepi one. What I did to get it work: 1. Upgrade dtc to version 1.4.7. By default it was dtc version 1.4.5 and I have get errors while trying to do " armbian-add-overlay sun8i-h3-spi-ads7846.dts" 2. There is missing driver in kernel by default, so I have installed ubuntu bionic 18.04.1 LTS on PC. After that use this guide https://docs.armbian.com/Developer-Guide_Build-Preparation/ Switch on ADS7846 module, then install new compiled package linux-image-next-sunxi_5.74_armhf.deb on OrangePi-one.

Hello, The Orange Pi 3 ARMBIAN image is no longer available on ARMBIAN Website, is there any way to get it ? https://www.armbian.com/orange-pi-3/ Thanks

Hi guys, I'm running Armbian on my BananaPi for almost a year now and it has always run seamlessly, since the latest upgrade to Arabian 5.20 (Kernel 4.7.3) I've started to experience problems with the stability of the daemons. Monit is doing an hard job lately restarting many times a day almost all the processes I'm running as damons, the most affected by the Killing are Python 2.7 (running Sickrage) and Deluge daemon. In particular Deluge being killed so many times a day is quite annoying since I have to recheck the integrity of many files almost every time I get the service up again. I didn't install any additional software that could have created this inst…

Hi, I'm running armbian ubuntu image 4.13.14-sunxi64 on Orange Prime, and have a problem. Wifi wont work. I can see a wlan0 as a result of ifconfig, but it neither find a wireless network, nor connect to provided. From dmesg i can see driver is spamming with message [ 303.336420] RTL8723BS: ERROR sd_recv_rxfifo: alloc recvbuf FAIL! I have /var/log overflow in several minutes and also frequent system freezes. rmmod r8723bs causes all this stuff to stop. Can anyone suggest where should i look? Thanks. Btw, self built debian stretch image 4.14 gives the same behaviour. I understand that H5 support is experimental, I just want t…

Morning all, First post here - just got my oPi PC 1.2 with the AllWinner HW chip set up yesterday... Running Jessie headless 5.10, updated to latest (afair, 5.112?). Used the Wget command to try and upgrade the kernal, the blue dos-like UI came up, it checked a few things, then fell down to command prompt, with "Error - unsupported HW". Any thoughts or fixes for this? THX

I use a OPiPC as my mqtt and smb server. Until Monday I used an older version of Armbian (something around 5.20 I think) and everything worked flawlessly. Monday i did a mistake and destroyed the sd card filesystem (i was doing a backup with dd, but i've made a mistake making the sdcard as the output file). After downloading and installing the system on a new sdcard (Armbian 5.69 on a 32gb Kingston class 10 sdcard) I've experienced a few problems: --h3disp and h3consumption were missing (I've read that this is due them being incompatible with the latest kernel, which is sad because i'd like to turn off the ethernet and hdmi controllers as well as underclocking the cpu to …

I installed the "buster" version on the orange board PI PC. I would like to set it as a dlna server. I have installed package minidlna, but it doesn't automatically mount the hard disks (formatted NTFS) inserted on the USB ports. what should I do ?

Hello, I am working on a project in which we need to use a Nanopi Neo Air (based on SoC Allwinner H3). In this project we need to use the USB serial interface to communicate with another part of the project. We need to configure the Nanopi Neo Air USB interface as a peripheral USB . Nanopi Neo Air's USB serial interface is configured by default as a USB host, and in "armbian-config" there is no way to change this configuration. The USB host (which is the other part of the project) will send data to the Nanopi Neo Air whenever there is new data. Is it possible to configure the Nanopi Neo Air as a peripheral USB? How can we do this configur…

I don't know it was mentioned before but Orange Pi PC Plus with WiFi and 8GB eMMC built-in is already available in Aliexpress store http://www.aliexpress.com/store/product/Orange-Pi-PC-Plus-ubuntu-linux-and-android-mini-PC-Beyond-Raspberry-Pi-2/1553371_32668618847.html price USB 19.99

board: orange pi zero plus (CPU H5) os: power on idle current is about 0.25A。 after poweroff the currtent rise to about 0.35A 。 and got error message on console: ----------------------------------------------------------------------- [ OK ] Reached target Shutdown. [67908.295169] reboot: Power down INFO: PSCI Affinity Map: INFO: AffInst: Level 0, MPID 0x0, State ON INFO: AffInst: Level 0, MPID 0x1, State ON INFO: AffInst: Level 0, MPID 0x2, State ON INFO: AffInst: Level 0, MPID 0x3, State ON ERROR: PSCI system shutdown: still alive ... -----------------------------------------------------------…

Hello Igor and congrats for your contribution and regards to community! As the title points, is there any chance to create a Lubuntu image that will out of the box support all Pis (Banana Pi, Banana Pro, BPi-R1) with SATA, audio, networking and video acceleration? If it's too much, does anyone knows what OS is close to that requirements at least for BPi-R1? Or can we build something like this from scratch with your resources? I tried to create a new image based on LeMakers Lubuntu for Banana Pi (http://jubitoblog.blogspot.gr/2015/06/jubitos-z-operating-system-for-internet.html - http://jubitoblog.blogspot.gr/2015/02/jubitos-for-banana-pi.html) without much luck, …

Hello, i've got a problem with my orangepi lite. Here are a few posts about problems with connecting to wifi networks, but my device can't even find wifi networks (with iwlist wlan0 scan ). In my area are multiple access point active. The OS is armbian for OrangePi Lite Version: 5.20. iwconfig shows the chip with no errors. I have tried multiple settings in /etc/network/interfaces and /etc/wpa_supplicant/wpa_supplicant.conf after posts in this forum but nothing is working ...

I have my Orange Pi Zero flashed correctly (I think) with the green light solid and the red light flashing on every so often. I've got the unit plugged into a charger that provides sufficient power. The devices SoC warms up hinting that it is actually booting. When plugged into my network the activity LEDs do not flash nor does my router detect it. I'm considering connecting my keyboard to connect it to wifi blind. If I plug it in after boot nothing changes. What should I do? How can I connect it to my wifi blind? I do not have the shield for video out.

Hi, I got my Zero today and installed the legacy jessie server. I need X (for one app) so I followed the same path as I did on my Raspberry Pi running Raspbian lite. sudo apt-get install --no-install-recommends xserver-xorg sudo apt-get install --no-install-recommends xinit sudo apt-get install xfce4 xfce4-terminal sudo apt-get install lightdm Should TV-OUT (pin 9 (and GND on pin 2) on 1x13 header) work as I do not get anything on my composite monitor? I looked in /boot/boot.cmd and it says setenv disp_mode "1920x1080p60" which is not compatible with a composite signal. I tried to alter it to 720x576i50 but no luck. I just wanted the TV-OUT to see that e…

Hello, I'm using armbian 5.25 on OPI Lite and wifi dongle 8192cu, after instaling these drivers: https://github.com/pvaret/rtl8192cu-fixes I saw that the interface drop half of the packages.... Can someone provide better drivers or tell me how to fix that? wlan1 Link encap:Ethernet HWaddr 00:13:ef:6b:24:e2 inet addr:192.168.100.7 Bcast:192.168.100.255 Mask:255.255.255.0 inet6 addr: fe80::213:efff:fe6b:24e2/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 -------->>>>>> RX packets:22255 errors:0 dropped:20602 overruns:0 frame:0 TX pac…

Hello! How to turn off Wi-Fi and Bluetooth devices to reduce power consumption? armbianmonitor -U -> result in attachment. Thank you. armbian-hardware-monitor.log

I notice there is a 16mb spi flash on the bottom of my orange pi zero. I read it is possible to boot off it. Has anyone done it, and is it useful? Is it possible to run without the sd card? I am interested in locking the sdcard to read only for reliability during power loss, and storing application configuration data to the spi flash if possible. Can it be mounted with a filesystem, or is it better to use a ramdisk and store it periodically to flash?

I did the following upgrades this morning libcurl3:armhf (7.52.1-5+deb9u8, 7.52.1-5+deb9u9), libgd3:armhf (2.2.4-2+deb9u3, 2.2.4-2+deb9u4), armbian-config:armhf (5.72, 5.74), linux-headers-next-sunxi:armhf (5.70, 5.73), linux-image-next-sunxi:armhf (5.70, 5.73), curl:armhf (7.52.1-5+deb9u8, 7.52.1-5+deb9u9), libcurl3-gnutls:armhf (7.52.1-5+deb9u8, 7.52.1-5+deb9u9), linux-dtb-next-sunxi:armhf (5.70, 5.73), base-files:armhf (9.9+deb9u6, 9.9+deb9u7) and found my I2C bus not working anymore. I did a scan on the 4 buses (Olinuxino Micro A20) and found a device on i2c-1 instead of i2c-0, changed my settings and all worked again, so I guess one of the updates must…

I installed Armbian xenial 3.4.112 on an Orange Pi PC in July of 2016. It ran non-stop until sometime in February. I realized it was no longer sending data to the internet. When I checked, the Orange Pi PC was still powered. However, the green+yellow ethernet LEDs were both blinking together at what looked like 2sec intervals. After only a short time of running, the CPU was already 84C. When I originally had put the Orange Pi PC into service, it would remain close to 43C. I connected a monitor and keyboard. It booted and a look at syslog showed the eth0 was looping on `DHCPDISCOVER`. I tried `ifconfig etho down` and `ifconfi…

Board OPi Zero 512, NEXT kernel 4.13.7, last Sunday compiled. I'm trying do start more than one Dallas 1 wire interface. My primary idea was to add second w1-gpio overlay but no success. The next one is to edit device tree for w1-gpio to add another pin, and then to edit fixup script. And need some help to understand this ( copied from sun8i-h3-w1-gpio.dts ) fragment@0 { target = <&pio>; __overlay__ { w1_pins: w1_pins { pins = "PD14"; function = "gpio_in"; }; }; }; fragment@1 { target-path = "/"; __overlay__ { onewire@0 { compatible = "w1-gpio"; pinctrl-names = "default"; pinctrl-0 = <&w1_pins>; gpios …

I want to wake up my orange pi plus 2e device through the pin. It will feature a PIR sensor on this pin. I did research in the forum, but I could not find any documents. We can wake up by applying a interrupt like Arduino through a pin. How do I follow a path for this device? When I take the device to sleep, I can not wake it up again. The buttons on it do not function at all.

hi all, is possible convert cubietruck on cubiebord to virtual machine?

I'm looking to add two ENC28J60 Ethernet interfaces to my OPI, does it have two SPI interfaces available? From my reading, it appears the onboard NAND flash takes up one SPI interface, but I cannot find any information on whether there is 1 or 2 other SPI interfaces available?

Hi, I am running armbian 4.11.6-sunxi with xfce4 on a Banana Pi M1. I need to login automatically without having to choose a session before login to the xserver. I am achieving the autologin OK but can't get rid of the session request . How can I achieve autologin complete with new session? Thanks for helping if you have an answer.

Hey everyone, I wrote a guide a while back on setting up Armbian on the Orange Pi Zero, with key-based ssh access enabled. Thought I'd share it with this forum I'd love feedback, questions and also definitely send pull requests if you have any edits or changes to propose!

Hi! Yesterday I upgraded my NanoPi Neo Plus2, during that the kernel version went from 6.12.74 (package version 26.2.0-trunk.478) to 6.18.19 (package version 26.2.0-trunk.626). This morning I noticed, that this kernel is missing the dm-snapshot.ko module. I searched the forum if anyone else is having this problem, but it appears I am the only one using this feature. I use snapshots to create consistent backups of the system. Is there a reason why it was removed and more importantly is there a way to get it back without having to compile the kernel myself? Greetings PS: I should note, that I want the module back in newer kernel versions in the fu…

How do I enable the cgroup memory controller on Armbian? I’m trying to control memory usage on my orange pi one using systemd with a unit file as follows: [Service] Slice=influxGroup.slice MemoryAccounting=true MemoryHigh=100M MemorySwapMax=250M The command systemd-cgls confirms that the influxGroup.slice has been created, yet memory is not controlled in line with the parameters in the unit file. I think the issue may be that cgroup memory controller is not enabled. I haven’t done anything to enable it, but I did notice that dmesg appears to indicate an enable statement in the kernel parameters: [ 0.000000] Kernel…

Hello, After I run apt-get update and upgrade, I lose the sound card: aplay -l aplay: device_list:268: no soundcards found... If I check my upgrade history, I can see the following: cat /var/log/apt/history.log Start-Date: 2018-03-16 22:33:12 Commandline: apt-get upgrade Upgrade: libgssapi-krb5-2:armhf (1.12.1+dfsg-19+deb8u2, 1.12.1+dfsg-19+deb8u4), tzdata:armhf (2017b-0+deb8u1, 2018c-0+deb8u1), ncurses-term:armhf (5.9+20140913-1, 5.9+20140913-1+deb8u2), libkrb5-3:armhf (1.12.1+dfsg-19+deb8u2, 1.12.1+dfsg-19+deb8u4), libk5crypto3:armhf (1.12.1+dfsg-19+deb8u2, 1.12.1+dfsg-19+deb8u4), linux-image-next-sunxi:armhf (5.34, 5.…

After along time I downloaded a new armbian image, after doing apt update/upgrade for the last year or so. I was quite surprised to see that the pcduino3nano is now deprecated, while other A20 boards are still supported. What was the exact reason that the pcduino3nano was dropped from support? If I keep using the deprecated OS, can I fully use apt update/upgrade for all user stuff? What would happen to all kernel and u-boot update packages? Is the latest armbian for the pcduino3nano automatically disabling those updates, or do I need to do something manually? *should* I block kernel & u-boot updates? thanks, Udi

I am using fresh installation of armbian legacy server version 3.4.113 on the Orange Pi Zero Rev v1.1. The FEX file seems to be incorrect. Some driver or process is blocking PA10, which is wired directly to the expansion header pin 26. According to the schematics, this port is not used anywhere else. # cat /sys/kernel/debug/gpio GPIOs 0-383, platform/sunxi-pinctrl, sunxi-pinctrl: gpio-10 (? ) out hi gpio-17 (red_led ) out lo gpio-202 (xradio_irq ) in lo gpio-354 (? ) out hi gpio-362 (green_led ) out hi In case i am the first one that tested this: gpio-10 aka PA10 aka ? is blocked gpio-17 aka …

Hi guys, I´m trying install kodi 18 on my orange pi lite with this tutorial (https://ua3nbw.ru/all/kodi-18-armbian-orangepi/) everything is fine, but MPV player is complete missing on armbian OS. Why? Thank you.

I am using Armbian_20.05.4_Lime-a64_focal_current_5.4.45_desktop.img.xz and I try run glxgears on Olinuxino-A64 with Lima. When I running glxgears I see 117 frames in 5.0 second = 23.313FPS. Also mouse response so slow on desktop. It is understood from here Olinuxino-A64 doing software render. Please correct me if I am wrong. I am new at this job and I have difficulty in fully understanding the problem. Is there a way I can get high FPS in glxgears using Lima? What exactly is problem here? Sorry if I ask silly question. Thanks. Below are some outputs for the board I use. dmesg | grep "lima" output: [ 8.579828] lima 1c40000.gpu: IRQ ppmmu2 not found [ …

After recent upgrade of Debian Buster stable on Orange Pi Zero Plus 2 leds entries disappeared from class directory: Could anybody provide some guidance on how to get them back?

Members of the forum may like to know that I have used Armbian's image of Debian Jessie for Orange Pi Lite Wifi that I found quite easy to set up. I have connected Orange Pi to a PIC device to control it with Telegram bot. My tutorial can be read at my blog Redacacia: https://redacacia.me/2016/07/17/telegram-bot-control-with-orange-pi-lite-wifi-and-axe056-board-with-picaxe-18m2/

Hi All, @tkaiser mentions in this thread http://forum.armbian.com/index.php/topic/1193-orange-pi-plus-2e-now-available/ the lima-memtester utility, requesting tests for the Orange Pi Plus 2E. Unfortunately I do not have a Orange Pi Plus 2E, I have however just received 10x Orange Pi Lite's and 2x Orange Pi PC+'s. Would it be useful to the project if I run this utility on all / some of my devices? Assuming yes and noting the comment: Do I need to run a desktop image with the HDMI plugged into a monitor? Also do I need provide some extra information to uniquely identify each board or will this happen automatically? Dave.

The following wifi dongle does not work with legacy kernel: Bus 002 Device 002: ID 0bda:8176 Realtek Semiconductor Corp. RTL8188CUS 802.11n WLAN Adapter $ uname -a Linux bananapi 3.4.113-sun7i #40 SMP PREEMPT Thu Feb 2 01:44:33 CET 2017 armv7l armv7l armv7l GNU/Linux Freshly flashed Armbian_5.25_Bananapi_Ubuntu_xenial_default_3.4.113_desktop

Hello, Using Vanilla Jessie latest image and used sd to sata/usb script to put everything on an 8gb usb stick. Everything works fine. When i add a 2.5 " sata hard drive system does not boot. Green light goen on, disk starts to spin and after a couple of seconds disk stops spinning and only red light stays on. I tried connecting sata disk after booting and i can see the disk through fdisk -l. (I put the disk on power after booting the system) I use this adapter:Power supply adapter 12V/1A , bought from olimex. Any idea what might be the case?Maybe there is not enough power to start hard disk while booting? Thanks in advance.

I am successfully using Armbian Current on my Banana Pi. I have a 120GB usb SSD drive. I'd like to boot from it - my other Banana Pi with the same system boots from SATA connected HDD no problem. When I boot the device, I can see the drive using sudo fdisk -l as /dev/sda1 I can also get the UUID and everything. I've modified the /boot/armbianEnv.txt file and changed the UUID, but I can't get the machine to boot. I tried also to change the UUID to /dev/sda1. Didn't help either. When I boot with HDMI connected, I can see the kernel iterating through USB bus and the result is "no USB storage device found" and that's it. …

Hi, In kernel 4.1, we have dmesg spammed by: [84320.834217] clocksource hstimer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 238907555784 ns It should disappear in 4.2. If you need to repair it now, you can patch it yourself: http://permalink.gmane.org/gmane.comp.hardware.netbook.arm.sunxi/17500 D.

The 1-bay NAS kit v1.2 has an RTC with option to add CR2032 button cell to keep HW time when system is shut down. But running `timedatectl` when device is booted in offline mode shows RTC is set to 1970-01-01 00:00:00 which defeats the purpose of having the option of CR2032. And yes, the button cell have juice; I've bought it a week ago and tested it before putting it in the kit.

Hi, 1st of all, thanks for the excellent job on Armbian so far, really feels very solid compared to most other distros. Here is my little problem: Installed Armbian_5.14_Orangepipc_Debian_jessie_3.4.112_desktop Realtek RTL 8188 plugged in into any USB port Followed Rudolfos tutorial Reboot - wireless works flawlessly Update via apt-get update/upgrade --> 8188 still recognized, but board locks up or reboots when I try to connect to an AP I am right now preventing updates to 5.14 as per attachement, but this is obviously not a preferred solution. The driver used is the 8192cu,the device ID is 0bda: 8176 Realtek 8188cus. Any directions? Best, -Thomas

I got an OrangePi Pc, and I see that Mali GPU frequency has been rolled back to 252 Mhz, or at least the kernel is saying so in dmesg. I took a look into the changelog, the frequency has been increased to nominal 600 Mhz in armbian v5.15, but now I installed a fresh 5.20, upgraded to latest packages and I see that kernel initializes the GPU at 252 Mhz. I found no traces of this rollback in the changelog. As I'm currently testing the SBC as a desktop replacement, I'm guessing if the increased gpu frequency could be of any benefit to the interface snappiness.

Hello, I am trying to boot Armbian on a stock Orange Pi Plus 2 which has stock Android installed to its eMMC. I perform the following steps: 1. Download the Armbian Stretch mainline kernel 4.14.y (https://dl.armbian.com/orangepiplus/Debian_stretch_next.7z). 2. Unzip the archive uzing p7zip (on Arch Linux, using "7z e Armbian_5.38_Orangepiplus_Debian_stretch_next_4.14.14.7z"). 3. Verify that the sha256sum of Armbian_5.38_Orangepiplus_Debian_stretch_next_4.14.14.img is 7ac1896ca4ea8f518d41d23ee07b05aedd1db23fbbeab2056865ae5a3c45e5c9. 4. Burn the image with Etcher to a brand new and genuine Samsung Evo Plus 32 GB. (It was used for wr…

kernel version Linux bananapim2plus 5.15.93-sunxi #23.02.2 SMP Fri Feb 17 23:49:46 UTC 2023 armv7l GNU/Linux dmesg [ 1065.023248] udc-core: couldn't find an available UDC or it's busy [ 1065.023290] misc raw-gadget: fail, usb_gadget_probe_driver returned -16 [ 1193.665509] udc-core: couldn't find an available UDC or it's busy [ 1193.665534] misc raw-gadget: fail, usb_gadget_probe_driver returned -16 [ 2883.115015] udc-core: couldn't find an available UDC or it's busy [ 2883.115040] misc raw-gadget: fail, usb_gadget_probe_driver returned -16 [ 2908.077549] udc-core: couldn't find an available UDC or it's busy [ 2908.077574] misc raw-gadg…

Hi every body, I have a Orangepi Plus 2E as you know with 16GB eMMC. Have installed armbian via SDCard before and executed nand-sata-install to copy it to eMMC. But currently need to get an image to install on another one. So there must be an opposite action like install_to_sdcard (in raspbian) but I couldn't find it.

Hi all, thank you for creating and maintaining Armbian. Makes live much more easier. I installed Armbian 4.5 (Cubietruck Jessie 4.2.3) via UART0. I'm now trying to access at least two further UART Devices (I need serial to an Arduino and to a GPS shield). I understood as Armbian uses the mainline Kernel script.bin is now obsolete and no longer used. Thus I don't know the pinouts for the other UARTs. Is there any documentation? Furthermore I'm not sure if the other UARTs are properly enabled in the Kernel configuration. Linux serial console seem to be on ttyS0 which is working fine: [ 0.000893] console [tty1] enabled Furthermore dmesg shows ttyS0: [ …

Normally the 'shutdown now' sequence makes my monitor 'lost connection' message appear but with this image the shutdown process do not finalize correctly...

Hello Community, I'm trying to get Armbian running on my Banana PI M1 with the following image: https://dl.armbian.com/bananapi/archive/Armbian_20.05.2_Bananapi_buster_current_5.4.43_minimal.img.xz I flashed the image with Etcher on my SD Card which is a Sandisk Ultra 16GB SDHC Card. After flashing I have inserted the Card into my Banana PI but I only get a red light, I already tried different images like the bionic image but without positive result and tried different power supply cables. In my DHCP Server I see no request. I have also flashed for testing reasons current image of Bananian which was directly working but I don't want to use…

I tried to set the I2C interface with the armbian-config option but it doesn't work because it writes to the file: armbianEnv.txt .... overlays=sun50i-h6-i2c0 sun50i-h6-i2c1 sun50i-h6-i2c2 and it didn't work on my OrangePi3LTS and it doesn't start the i2C service on startup? but when I enter it manually: overlays=i2c0 i2c1 i2c2 then the i2c service works with my 40x2 LCD 🙂 ...is this a bug and if so can it be fixed? is the option: armbian-config still compatible with my OrangePi3 LTS?

Hi, I have tested this issue : https://github.com/linux-sunxi/linux-sunxi/issues/244 apparently it is not resolved. kernel panic log : [18109.785618] ------------[ cut here ]------------ [18109.790613] kernel BUG at arch/arm/mach-sun7i/dma/dma_core.c:32! [18109.795412] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP ARM [18109.797259] Modules linked in: disp_ump mali_drm drm mali ump cpufreq_userspace ap6210 sunxi_ir hidp rfcomm hci_uart bluetooth sg [last unloaded: scsi_wait_scan] [18109.813725] CPU: 0 Tainted: G W (3.4.112-sun7i #2) [18109.816542] PC is at __dma_start+0x7c/0x80 [18109.819171] LR is at dma_ctrl+0x90/0x1dc [18109.828043] pc : [] lr : …

Hi, haven't touched my system for quite a long time, now I'm running into problems while trying to uprade system: Err http://apt.armbian.com trusty/main armhf Packages 404 Not Found ... W: Failed to fetch http://apt.armbian.com/dists/trusty/main/binary-armhf/Packages: 404 Not Found W: Failed to fetch http://nginx.org/packages/mainline/ubuntu/dists/trusty/nginx/binary-armhf/Packages: 404 Not Found [IP: 95.211.80.227 80] E: Some index files failed to download. They have been ignored, or old ones used instead. E: Couldn't rebuild package cache aptitude upgrade The following packages will be upgraded: linux-trusty-…

Hey there, I have managed to compile your great image. How ever I dont receive any HDMI signal on boot. During the first boot I got atleast some picture. but after loading kernel all went black. See log: https://sprunge.us/YjQd I used a] HDMI to VGA converter b] a direct HDMI connection. Both screens usually work. See log: https://sprunge.us/YjQd I will continue to install the system via SSH, however I would like to use HDMI lateron e.g. in emergency cases. Greetings!

Hi guys! I've an Olimex LIME2 EMMC installed in a remote location: I installed it with Olimex provided image of debian Jessie, which has kernel 3.4.103-00033-g9a1cd03-dirty. The installation has been done over internal EMMC and it worked. Now, for various reason I would like to switch to armbian. I would like to install armbian over the existing image. so not to have to reinstall packages ad my local software. I would like to keep the installation on internal 4GB EMMC memory. I'm asking if it's possibile to do it without having to reinstall and possibily over ssh, because the board is in remote location. Thanks for your sug…

hey guys I ran some test with both version of OPI Win's Armbian and: I got all time reboot on server edition I see the the first Armbian boot up page but desktop wouldn't show up... please give me solutions. Thank you guys.

Hi, I have managed to install u-boot on the spl flash, and it properly runs and detects everything, but i've run into a bit of an issue, while loading the kernel, it gets stuck. To create the usb drive I just cloned the partition of the sd card (not the whole card, just the ext4 partition), I don't know if that can be the issue. here is the full log: https://pastebin.com/jPEkMnYq Any ideas?

I'am running a PiOne with 4.14.14 Stretch. I have installed acpid and give the command acpi_listen When pussing the button in Stretch and I didn't see any logging. With the old kernel in 5.38 Jessie on the same PiOne I saw button/power PBTN 00000080 00000000 button/power PBTN 00000080 00000000 button/power PBTN 00000080 00000000 In the output of dtc /boot/dtb/sun8i-h3-orangepi-one.dtb I saw key_pins@0 { pins = "PL3"; function = "gpio_in"; linux,phandle = <0x39>; phandle = <0x39>; }; Means gpio_in defined as an input? Is the button function not yet implemented in 4.14.14? Or is something going wrong?

Scenario 1:[router]<--(ethernet)-->[pcDuino3] pcDuino3 IP: 192.168.1.5 root@pcduino3nano:~# dpkg-reconfigure tzdata Current default time zone: 'America/Bogota' Local time is now: Wed Dec 31 20:48:49 COT 1969. Universal Time is now: Thu Jan 1 01:48:49 UTC 1970. root@pcduino3nano:~# date Wed Dec 31 20:49:01 COT 1969 root@pcduino3nano:~# ntpq -p remote refid st t when poll reach delay offset jitter ============================================================================== yak.osoal.org.n .INIT. 16 u - 64 0 0.000 0.000 0.000 bunny.zeroloop. .INIT. 16 u - 64 0 0.000 0.000 0.…

Hello guys, I've been trying for the past month to get USB OTG and I2C to work on a NanoPI NEO AIR running Armbian, without any success. For OTG what I've tried was adding the following to "sun8i-h3-nanopi-neo-air.dts": &usb_otg { dr_mode = "otg"; status = "okay"; }; I have also enabled OTG and I2C in the kernel config menu, but for I2C I couldn't find what to put inside the DTS file. Can someone give me pointers on how to solve this, please? Yes, I am a very inexperienced developer when it comes to embedded systems and have very poor understanding of how to properly configure a device tree source file. Any help wo…

I will describe my problem with NanoPi Neo Core2: I installed the system on eMMc I installed WiringNP I installed the USB drive Everything worked, also Putty via USB I wanted to connect the external module via SPI. The module requires setting the transfer frequency to 20 MHz. I decided to look at the file sun50i-h5-nanopi-neo-core2.dtb . For this purpose, I decompiled to a file . dts . Due to late night time I made a cardinal error, that is before these activities I did not copy the file . dtb I just played on the operating system. After the power is turned off NanoPi and the next day the system is not raised. Red power LED is lit green while…

Hi, is it possible to run xfce4 on mainline on a Orange Pi Zero? I'm doing it with jessie legacy (I need to have a mumble client running, accessing it with X11vnc) but I wanted to upgrade. I've tried the same setup but without any luck. apt-get install --no-install-recommends xserver-xorg apt-get install --no-install-recommends xinit apt-get install xfce4 xfce4-terminal tango-icon-theme gnome-icon-theme lightdm lightdm fails to start on boot and startx tells me: Fatal server error: (EE) no screens found(EE) Have somebody done it and can it be done easily?

Hi, There is a fresh new install. armbian-config fails with a message "There are no targets. Please check your drives". BOARD=nanopineo BOARD_NAME="NanoPi Neo" BOARDFAMILY=sun8i VERSION=5.65 LINUXFAMILY=sunxi BRANCH=next ARCH=arm IMAGE_TYPE=stable BOARD_TYPE=conf INITRD_ARCH=arm KERNEL_IMAGE_TYPE=zImage System diagnosis http://ix.io/1sm3

Hello, I've been trying to compile armbian for my OrangePI Zero Plus H5 with NEON and VFPV support for OpenCV . If I use the providede default image from OrangePI I can see that NEON and VFPV are enabled with lscpu command. When compiling armbian from source or downloading the pre-compiled images, I see the following: root@orangepizeroplus2:~# lscpu Architecture: aarch64 Byte Order: Little Endian CPU(s): 4 On-line CPU(s) list: 0-3 Thread(s) per core: 1 Core(s) per socket: 4 Socket(s): 1 NUMA node(s): 1 Vendor ID: ARM Model: 4 Model…

Trying to run mainline kernel on allwiner V3. U-boot: compiled and successfuly runs with some patches. After starting u-boot, I'm loading dtb and kernel into memory and trying to boot the kernel, but nothing happens. I need any help to solve a this issue. Скрытый текст diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 43951a7731..af7d16076a 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -693,6 +693,7 @@ dtb-$(CONFIG_MACH_SUN8I_V3S) += \ sun8i-s3-elimo-initium.dtb \ sun8i-s3-pinecube.dtb \ sun8i-v3-sl631-imx179.dtb \ + sun8i-v3-dv8000-imx179.dtb \ sun8i-v3s-licheepi-zero.dtb dtb-$(CONFIG_MACH_SUN50…

LED link on WAN port ON when disconnect cable link ( not change to OFF, always ON). Help me how to fix the problem

I experencing the following error upgrading orangePI-PC with connected a WiFi ralink key: # apt-get upgrade Reading package lists... Done Building dependency tree Reading state information... Done Calculating upgrade... Done The following packages will be upgraded: armbian-firmware 1 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. Need to get 1,617 kB of archives. After this operation, 0 B of additional disk space will be used. Do you want to continue? [Y/n] Y Get:1 http://apt.armbian.com/ jessie/main armbian-firmware armhf 5.25 [1,617 kB] Fetched 1,617 kB in 11s (138 kB/s) …

Hi everyone, As the title, I would like to set the isolated cpu 3th on orange pi zero (armbian v4.19.62) I've try to follow this answer of ChrisK in the topic here And the boot.cmd file after edited as below: # DO NOT EDIT THIS FILE # # Please edit /boot/armbianEnv.txt to set supported parameters # setenv load_addr "0x44000000" setenv overlay_error "false" # default values setenv verbosity "1" setenv console "both" setenv disp_mem_reserves "off" setenv disp_mode "1920x1080p60" setenv rootfstype "ext4" setenv docker_optimizations "on" setenv devnum "0" setenv rootdev "/dev/mmcblk${devnum}p1" setenv bootargs console=ttyS0,115200 noinitrd root=/dev/m…

I am not sure if this is intended or bug, When building the image for Nanopi duo2 I cannot add kvm. This worked before so I guess that this is regression. I get this search result for kvm in the build process: ┌──────────────────────────────────────────────────────────────────────────────────────────────────────────────────────── Search Results ────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┐ │ Symbol: KVM [=KVM] …

Hello, i am a "newbee" , just got yesterday my orange pi and did not get it working..... after hours i managed but it is strange ( i think ) the orange does NOT start with NO monitor cable attached..... it does does NOT start with a hdmi-dvi converter.... ( that i found on the web ). The ONLY way i get it started is : 1 - HDMI cable attached to a HDMI monitor AND 2 - Power button pushed AND 3 - then as last one plugin the power cable.... is that normal ?. i doubt it , that is why i ask... also then I have armbian working, super, no problem. but when hitting the restart button in Armbian the orange Pi plus 2e s…

Hi everyone, today I notice that my orange Pi one stopped (crashed) yesterday, how to prevent this next time ? Is the watchdog a solution to the problem? or please advice are there any additional parameters or details I need to know for using watchdog ?

Hi I have an Orange Pi PC running "ARMBIAN Debian GNU/Linux 8 (jessie) 3.4.113-sun8i". Can I update to Armbian Strech kernel 4.14 directly without lose of data and configurations? How can I do it? Thanks.

Hello, I run Armbian on Banapi M1 (use it as samba file server with OpenMediaVault) and recently after apt-get upgrade and reboot the Bananapi is stuck in boot loop. I have tried the following to eliminate possibility that it's a HW failure: booted into fresh Armbian image with different SD card: success -> the board is OK dumped whole Armbian installation as image from the original SD card, overwrote it with fresh Armbian image and booted with it: success -> the SD card is OK wrote the dumped Armbian installation image onto a different SD card and booted from it: stuck in boot loop wrote the dumped Armbian installatio…

Hello, I'm running Armbian on the original (LeMaker) A20 powered BananaPI : cat /etc/issue Armbian 21.08.6 Buster \l I did an apt-get upgrade few days back, and since, it's CPU load is always around 1.00 even if I don't run my custom application (obviously, it wasn't the case before). Nothing special in /var/logs/messages, but top show me a kernel process always on top : top - 15:03:43 up 1 day, 17:40, 1 user, load average: 0,98, 1,03, 1,12 Tasks: 112 total, 2 running, 110 sleeping, 0 stopped, 0 zombie %Cpu(s): 4,5 us, 6,3 sy, 0,0 ni, 89,0 id, 0,0 wa, 0,0 hi, 0,2 si, 0,0 st MiB Mem : 993,9 total, 583,3 free, 119,7…

Hi, How i can find information for set the fex file, kernel, etc. etc. for use the spi in userspace? i don't see in /dev any spidevx.0 device

Hi, Is there any way to set all gpio to low in OPI Zero during de boot? becouse my OPI Zero is turning on some devices when is turning on. i've been searching about this problem but i couldn't find any solution. ty!

Armbianmonitor: http://ix.io/4cYv Hi I'm trying (and failing miserably) to achieve a simple goal with my Orange Pi 3 LTS: to have pin PD15 set as 'output-high' on startup. From reading the documentation, it seems the logical way to go about this task is to create a custom DT Overlay so that's what I set out to do. Based on the Armbian documentation and various examples I found online, I created the following sun50i-h6-gpio-pwr-status.dts file under /boot/overlay-user : /dts-v1/; /plugin/; / { compatible = "allwinner,sun50i-h6"; fragment@0 { target = <&pio>; __overlay__ { gpio_pwr_pin:…

No matter what I do, when I use an Armbian image built with compile.sh I get a blank orange screen on the OPi Plus 2. The downloadable pre-built image from Armbian for the board works fine. Wanting to debug this, I have an Adafruit UART serial cable adapter, known functioning and working. If I attach this to the UART pins on the small header near the power socket I get no output (and I have swapped RX and TX to no avail). How does one enable this UART? Am I using a wrong approach? I have console=both in armbianEnv.txt.

I'm running the latest lime1 armbian (linux 4.14) and am having great difficulty controlling the mic levels. amixer yields: Simple mixer control 'Left Mixer Left DAC',0 Capabilities: pswitch pswitch-joined Playback channels: Mono Mono: Playback [off] Simple mixer control 'Power Amplifier',0 Capabilities: volume volume-joined Playback channels: Mono Capture channels: Mono Limits: 0 - 63 Mono: 48 [76%] [-15.00dB] Simple mixer control 'Power Amplifier DAC',0 Capabilities: pswitch pswitch-joined Playback channels: Mono Mono: Playback [on] Simple mixer control 'Power Amplifier Mixer',0 Capabilities: …

Hey guys. I have been trying to utilize H5 vpu decoding for 10+ hours... Still no go. Here is the checklist: kernel Using mainline kernel 5.8.9 from Armbian/build current. `uname -a` output: All kernel configs needed on Sunxi-Cedrus homepage were added, cma set to 256M. libva-v4l2-request Using https://github.com/Sash0k/libva-v4l2-request master. Compiled and make installed. `vainfo` output: `v4l2-ctl --list-formats` output: `./v4l2-request-test -f 25 -l` output: Cpu usage is quite low(4 cores <5%), checked with lsof and…

Fails to boot after creating a swap file, it gives an error "BUG: soft lockup - CPU#0 stuck for 23s!". Help solve the problem.

Just wanted to save some time of a person who will think of trying to do this. It crashes all the time with acceptable settings. With a tiny world and minimal server settings(and disabled watchdog), it works but it's unplayable. Server can't keep up even with a free falling player. I have heatsinks and fan on the pi so I don't think it's about throttling. I think this CPU is insufficient for this task.

Hi! Just installed Orange Pi Zero Armbian (xenial stable legacy kernel - I still want some internal wifi ) But, tor package from default repository is failing. Error: Jul 18 22:36:52 localhost systemd[7985]: tor@default.service: Failed at step NO_NEW_PRIVILEGES spawning /usr/bin/tor: Invalid argument Jul 18 22:36:52 localhost systemd[1]: tor@default.service: Main process exited, code=exited, status=227/NO_NEW_PRIVILEGES This applies to default tor version and tor version from repository of torproject.org (https://www.torproject.org/docs/debian.html.en) System info: orangepizero:~$ uname -a Linux orangepize…

Hi all, I would like to use the PWM1 in order to drive a charge pump, but I am struggling to enable PWM using the DTB on Armbian v23.11. Anyone succeeded in configuring PWMs in H616? Thanks in advance!

Which system to install on Orange Pi Plus 2 ? http://www.armbian.com/orange-pi-plus/???

Hi everyone, Sorry if this is a case of me missing something completely obvious but I'm a total beginner and am stuck. I got my first Orange Pi PC the other day and, after a few update issues was advised to put Armbian on it which I've done. My plan was to connect it to my bedroom TV to let me work on coursera courses with wireless mouse & Bluetooth keyboard out of the way of the kids. I've got a generic 802.11N USB wifi adapter which I plugged in to the Pi, but it doesn't show up in my network list. Also, when I plug in a Bluetooth adapter and open the settings it doesn't find any Bluetooth devices at all during search. There's usually an led inside the a…

Hi, I'm trying to get Bluetooth working on a Cubietruck running 6.6 kernels including the latest Armbian release. What I'm finding is that a Cubietruck can discover other Cubietrucks but nothing else. Other devices (e.g. Raspberry Pi, Nvidia, Rockpi, and various phones) can discover each other but not the Cubietrucks. I have three Cubietrucks here and testing with the old 4.99 Bluetooth software or the current 5.55 release shows no difference. But if I run a Cubietruck with the ancient 3.4 kernel it can detect other devices but not the Cubietrucks running the 6.6 kernels. I'm using the same Wi-Fi firmware and BT .hcd file in all cases. So it's like the Cubietru…

Hi All, I'm using a rather old Armbian (wheezy) image on an Olimex Micro. I've installed a lot of apps on it, so I don't want to be moving to a newer image. I'm trying to copy my SD card image to NAND using the `nand-sata-install.sh` script that came with the image. All goes well. The script partitions the NAND, reboots, installs all files and shuts down. When I remove the SD card and power on, the board boots and everything is still alright. Now, on subsequent poweroffs or reboots, the board does boot, but I doesn't connect to ethernet. Boot logs from debug UART show that `proc` isn't mounted. Error: /proc must be mounted What could be the reaso…

Hi All, My first topic here, I own a Banana Pi M1 and I have just switched from bananian. Everything looks great in armbian and most of the things are just working, I just miss zsh from bananian but that was easy to fix. However I use my server for backups using ecryptfs (so I can encrypt/decrypt folders on demand) and I'm unable to mount any ecryptfs directory. My configuration: Banana PI M1 running Debian Wheezy mainline kernel 4.4.3 (just installed) Things I've done: Install ecryptfs-utils (installs ok and tools are available) Try to mount a ecryptfs directory: I get the message "unknown filesystem type ecryptfs" Try to load as a module (just in case):…

I'm running an OrangePI PC with legacy Jessie server and armbian 5.23 and kernel 3.4.112. I never seen the ouput through the HDMI monitor. It's always without signal, even at boot when uboot start. Is that normal ? I played with h3disp, but it never work. I would like to see just the boot and the text console. Any suggestion ? Thanks

Hi all. I've been struggling for several days to establish an internet connection via enc28j60 (Ethernet to SPI device) on my Nano Pi NEO Air, running Armbian 5.27, kernel 4.11.3. I have this custom DTS file added to my armbianEnv.txt, with two small modifications regarding the interrupt pin (apparently, PA7 is not available on Nano Pi NEO Air). I have pins = "A17"; ... interrupts = <0 17 2>; instead of pins = "PA7"; ... interrupts = <0 7 2>; The DT stuff is correctly loaded during boot, and an eth0 interface shows up (initially with random MAC address upon every reboot, but it's fixed now). However, only the orange ligh…

Hi! I recently upgraded the OS of my OpiZeroLTS, from the Debian Stretch Server 5.3.5 (available distro on Sunxi website) to Debian Buster 5.8.5 (downloaded from armbian webpage). Everything went well, except when I plug my USB webcam several video devices are assigned. I made a script with fswebcam to acquire still pictures from all /dev/video* and these "ghost" cameras are causing errors when the software try to open them as regular webcams. My script: for vid in /dev/video*; do output=$(basename $vid) fswebcam -d $vid -r 1920x1080 -D 10 -S 5 -F 1 --jpeg -1 --no-banner --no-timestamp --no-info /opt/images/$output mv /opt/i…

hi all, My Orange Pi PC here: uname -a Linux orangepipc 3.4.112-sun8i #30 SMP PREEMPT Sat Apr 30 19:49:10 CEST 2016 armv7l GNU/Linux and dmeg like this [ 1.017014] asoc: sndcodec <-> sunxi-codec mapping ok [ 1.017964] [DAUDIO]sunxi-daudio cannot find any using configuration for controllers, return directly! [ 1.018158] [I2S]snddaudio cannot find any using configuration for controllers, return directly! [ 1.018174] [DAUDIO0] driver not init,just return. [ 1.021480] asoc: sndhdmi <-> sunxi-hdmiaudio.0 mapping ok and I check status of ALSA lib # systemctl status alsa-state.service â— alsa-state.service - Manage Sound Card State (restor…