Rockchip

Hello, i have a litte problem with my armbian/helios. I use a usb hdd for "backup" (snapraid parity) that only need to run every 2 days so that i unmount the drive and put this in standby (hdparm -y /dev) All goes well but after some time the drive awake again (without mount) and i dont know how i can prefent this. does anyone have an idea where I can look thanks for help.

I have successfully built 21.08 and 22.02 branches for miqi (rockchip) with EXTRAWIFI=no only, but unfortunately 23.05 build fails with error: arm-linux-gnueabihf-gcc: error: unrecognized -march target: armv5 arm-linux-gnueabihf-gcc: note: valid arguments are: armv4 armv4t armv5t armv5te armv5tej armv6 armv6j armv6k armv6z armv6kz armv6zk armv6t2 armv6-m armv6s-m armv7 armv7-a armv7ve armv7-r armv7-m armv7e-m armv8-a armv8.1-a armv8.2-a armv8.3-a armv8.4-a armv8.5-a armv8.6-a armv8-m.base armv8-m.main armv8-r armv8.1-m.main iwmmxt iwmmxt2; did you mean ‘armv4’? arm-linux-gnueabihf-gcc: error: missing argument to ‘-march=’ Is there a way to get this to c…

Hello! First of all I want to thank everyone in Armbian for making OS that works, I am testing Armbian Jammy 23.2.7 Cinamon Desktop and so far it is much better than ones from FE. My intentions are using R6C as Home Assistant server (that works), NAS, Kodi Multimedia player with audio passthrough. But important question this time is how correctly to transfer OS from 32Gb SD card to built in 32Gb eMMC memory? I was trying several times sudo nand-sata-install method, but every time while "Cleaning up ... Almost done." it finishes with error: Error while creating U-Boot loader image with mkimage grep: /mnt/nand-sata-install.YRXC4e/bootf…

Hi, I want to do a NAS RAID(4,1) with the M4 with SATA hat. This thing is f... damned fast with SAMBA. I meassured 60MB/s with a 1.5TB 2.5" drive I had just laying around. OK, I forgot to mention that I installed Armbian. It's been three years since my last attempt to build a useful PC with AARCH64 and many things happened meanwhile. Looks like the time has come finally. (To say good bye to x86 and Windows.) Can someone point me to a direction before I gonna buy four SSDs?

I once had openmediavault (nas software) and citadel-server (groupware software) running together on an x86 computer with Debian operating system. When I try this on Helios64 running armbian (Debian 10 Buster) and kernel 5.8, then the package manager does not allow it. That means, when I start with an installed openmediavault and want then to install citadel-server as well the package manager removes openmediavault first. Does anybody have an idea or a solution to the problem?

Hi, I have an issue with an USB device which is not detected; looking on other forum, it seems that additional modules shall be added: - cdc_acm,cdc_ether - rndis_host - rndis_wlan - usbnet I'm not able to load these using the modprobe cmd & checking loaded modules with lsmode cmd. I suspect that they are not part of the kernel. Any hint how to solve this, eventually recompile / install ? Thanks by advance, Samuel

I am having this problem with apt-get update, please if someone could help me, maybe we have to change the repositories

I'm trying to get the image for the Radxa 5A model and the website https://mirror-us-phx1.armbian.airframes.io/dl/rock-5a/archive/ seems to be down since this morning. Any idea?

Hi, I'm currently facing strange problems... I'm using NanoPi and operate some USB devices with it. Since I wanted to know the total power consumption of the system, I measured current which flows into NanoPi from the outlet. The current during while the camera working was very nice (about 1A) so I shut the pi down. Then, I found that the total current value gradually rose up from about 1A to 1.5A. This seems to be so strange because when it gets shutdown, the power should be off as well, and the pi only needs small amount of power just to light the red LED. I tried a few times but the result was always same... …

Are there any plans to offer a 2-bay version of Helias64? Whould it be possible to purchase the board only - without case?

Device is Orange Pi4 For example, so that it displays: * Mounting debug filesystem ... [ ok ] * Mounting config filesystem ... [ ok ] * Mounting cgroup filesystem ... [ ok ] * Remounting devtmpfs on /dev ... [ ok ] * Mounting /dev/mqueue ... [ ok ] * Mounting /dev/shm ... [ ok ] * Creating list of required static device nodes for the current kernel ... [ ok ] * Starting udev ... [ ok ] * Generating a rule to create a /dev/root symlink ... [ ok ] * Populating /dev with existing devices through uevents ... Kernel is 5.4.23-rockchip64

Can someone tell me the major/minor device numbers for the /dev/rknpu device? It wasn't created in the image that I'm using. I'm trying to determine if the built-in npu has enough functionality to test a llm: # cat /sys/kernel/debug/rknpu/version RKNPU driver: v0.9.8 # I'm running the latest of the linux-image-vendor-rk35xx=25.5.1 v6.1.115 $ uname -a Linux cm3588-nas 6.1.115-vendor-rk35xx #1 SMP Wed Aug 13 03:55:09 UTC 2025 aarch64 GNU/Linux $ # LD_LIBRARY_PATH=/usr/lib/aarch64-linux-gnu python3 server.py Loaded RKLLM library from '/usr/lib/aarch64-linux-gnu/librkllmrt.so' RKLLM_LOG_LEVEL: 1 Initializing model with parameters: Pa…

Hi Team, i have a lcd touchscreen android rockchip rk3288 ( armeabi-v7a ) and i want change the OS with armbian and install it on sd card , which image that should i use? regards, Adrian

I have been trying to compile some packages that do work on the x86 platform and versions of Ubuntu and Debian but it seems like this define is missing so the program in question cannot compile a specific syscall in the file. Is SYS_getdents defined in the standard location unistd.h? I looked at the header but had some difficulties working through some of the defines. Thanks, Carter.

Hey, I am working with Weston-7 alongside Lima driver with MESA v19 to render using MALI450 on the display but it isn't rendering it properly. I thought the issue is with MESA so I upgraded it to v20 and applied required patches for Weston-7, but still the result is same and there is no improvement. I have attached the video link below of Weston terminal on the display for reference. Weston render Any idea what I might be missing here?

I install armbian on the sd card, then insert it into firefly ROC-RK3328-CC. At the start, it flashes quickly 2 times, makes a small pause and flashes quickly 2 more times. Before that, it worked correctly, but I decided to reinstall the system and got this problem. I tried to install the system from firefly, as a result, only debian 9 worked, but it also worked with problems (at the first launch it reached the desktop, after rebooting and connecting the keyboard and mouse, it did not go beyond tty).

I have a Rock64, purchased in 2019, that has been running happily for 4 years. I was recently experimenting with hooking it up to a relay board and now I am unable to connect to the internet. I am unsure whether something is fried on the board itself or if this is a software problem I can fix, and unsure how to figure that out. Details I have learned more about relay boards now, so I'll do a few things differently and more carefully next attempt, but I had the 5v pin powering the relay board and the 3v pin, GPIO3_A4, and GPIO3_A5 connected to the control side to control two of the board's relays. When connected the Rock's power leds were still on, but eit…

Hi, First of all I am posting in Rockpro64 section because I am not seeing one for Rock64 What I need is like the title says: use OTG USB port as regular USB 2.0 port (so I can connect another device). Currently I need the 2 USB 2.0 ports (USB 3.0 is already being used with a external disk). Is this possible? OS version: Armbian 24.2.1 Jammy - Linux 6.6.16-current-rockchip64 Thanks in advance.

This is the uart output of the latest image Armbian_21.05.1_Nanopct4_focal_current_5.10.35.img.xz DDR Version 1.24 20191016 In Channel 0: LPDDR3, 800MHz CS = 0 MR0=0x58 MR1=0x58 MR2=0x58 MR3=0x58 MR4=0x2 MR5=0x1 MR6=0x5 MR7=0x0 MR8=0x1F MR9=0x1F MR10=0x1F MR11=0x1F MR12=0x1F MR13=0x1F MR14=0x1F MR15=0x1F MR16=0x1F CS = 1 MR0=0x58 MR1=0x58 MR2=0x58 MR3=0x58 MR4=0x3 MR5=0x1 MR6=0x5 MR7=0x0 MR8=0x1F MR9=0x1F MR10=0x1F MR11=0x1F MR12=0x1F MR13=0x1F MR14=0x1F MR15=0x1F MR16=0x1F Bus Width=32 Col=10 Bank=8 Row=15/15 CS=2 Die Bus-Width=32 Size=2048MB Channel 1: LPDDR3, 800MHz CS = 0 MR0=0x58 MR1=0x58 MR2=0x58 MR3=0x58 MR4=0x2 MR5=0x1 MR6=0x5 MR7=0x0 MR8=0x1F MR9=0x1F …

Hello, I have this combinations which was probably a mistake, because I cannot get the camera running whatever I do. Was someone able to get it up or give me some advice, lead me a good direction? Thanks a lot.

Hello friends, Has anyone here successfully activated the I2S pins for connecting a DAC? According to the official documentation, the PCM functionality should be available on physical pins 12 (GPIO4_A6), 35 (GPIO3_C2), 38 (GPIO3_C0), and 40 (GPIO3_B7) of the GPIO header. I've tried many options - in the DTS overlay I've enabled various I2S variants starting from "i2s0_8ch" up to "i2s9_8ch", including different "pinctrl" m[0-1] variants like "i2s1m0" or "i2s1m1", and alternatively "i2s2m0" or "i2s2m1", but I've never managed to get ALT3 mode on the mentioned pins (I assume I2S function = ALT3 mode). In certain combinations, I can at leas…

Hi All! I've recently moved to Armbian (Debian buster server) on my Rock Pi 4B - from Ubuntu provided by Radxa (some way failed upgrade). However system is booting from eMMC which has Radxa kernel and then directly to Armbian file system on SSD connected via USB 3.0. Great is that Armbian is working with Radxa kernel, which I want to change to 5.8.14-rockchip64. My question is how should I prepare /boot folder on eMMC (which is FAT file system) to boot Armbian kernel? Is there any other way (reformat eMMC for ext4@32768 sector for /boot folder) to achieve this? Thanks.

Hello, did somebody already have success connecting a Raspberry Pi 7 inch display to the current Armbian build? I already tried to add this overlay via armbian-add-overlay, but this did not work. What am I missing? Thank you for your help!

Hello, I have been trying to interface with a MCP2518FD CAN controller using a RockPi 4b and have been encountering some issues. The specifications in which I want the CANbus to operate are as such: Baud: 250kb/s FD: OFF Other details: Oscillator: 40MHz SPI Bus: SPI1 (see below) The RockPi pins that are being used are the following (based on the standard pinout of the RockPi 4B https://wiki.radxa.com/Rock4/hardware/gpio) Pin #19 SPI1_TXD -> MOSI Pin #21 SPI1_RXD -> MISO Pin #23 SPI1_CLK -> SCK Pin #22 GPIO4_D5 -> INT Pin #24 SPI1_CSn -> CS I have tri…

NAS was on during the night and this morning : no more RAID5 (with 5 WD HDD). After reboot, i see that two disks are missing : ``` [Sun Jul 18 11:49:11 2021] ata1: illegal qc_active transition (00000000->00000001) [Sun Jul 18 11:49:14 2021] ata2: softreset failed (device not ready) [Sun Jul 18 11:49:23 2021] ata1: illegal qc_active transition (00000000->00000001) [Sun Jul 18 11:49:24 2021] ata2: softreset failed (device not ready) [Sun Jul 18 11:49:38 2021] ata1: illegal qc_active transition (00000000->00000001) [Sun Jul 18 11:49:38 2021] ata1.00: failed to set xfermode (err_mask=0x40) [Sun Jul 18 11:49:56 2021] ata2: illegal qc…

Today I decided to update my kernel to 6.3.9 with the mainline ubuntu kernel/ppa https://ubuntuhandbook.org/index.php/2020/08/mainline-install-latest-kernel-ubuntu-linux-mint/ However this does not work if you have disk-encryption . After rebooting and being greeted by enter your password, it did not work claiming its missing the dm_mod module. This is the device-mapper module needed by cryptsetup to create a device in /dev/mapper/ After running unmkinitramfs on the 6.3.9 kernel /usr/lib/modules/6.3.9/kernel/drivers/md/dm-mod.ko was indeed missing. Is this normal for mainline ubuntu kernels ? and does anyone know how…

I builded u-boot for orangepi3B from https://github.com/orangepi-xunlong/orangepi-build repo and I compiled armbian with officiall repo wit this config:https://github.com/armbian/build/blob/main/config/boards/orangepi3b.csc GitHub (https://github.com/orangepi-xunlong/orangepi-build). Problem: Data: - Version (branch) u-boot cloned form orangepi-build official repo: - Debug via UART from OPI3B: CONQ., [13.11.2024 10:14] DDR Version V1.10 20210810 ln ddrconfig:7 LPDDR4X, 324MHz BW=32 Col=10 Bk=8 CS0 Row=17 CS1 Row=17 CS=2 Die BW=8 Size=8192MB tdqss: cs0 dqs0: -72ps, dqs1: -168ps, dqs2: -96ps, dqs3: -168ps, tdqss: cs1 dqs0: -72ps, dqs1: -144…

Im trying to build for a OrangePi 5 Pro. I tried the following compile line, but it didnt boot. Repeat Build Options [ ./compile.sh build BOARD=orangepi5 BRANCH=current BUILD_DESKTOP=yes BUILD_MINIMAL=no DESKTOP_APPGROUPS_SELECTED='browsers chat desktop_tools editors email internet multimedia office programming remote_desktop' DESKTOP_ENVIRONMENT=xfce DESKTOP_ENVIRONMENT_CONFIG_NAME=config_base KERNEL_CONFIGURE=yes RELEASE=noble ] What am I doing wrong? Thanks.

I am observing huge difference in samba speed (both ways to/from PC on Gigabit Ethernet) with Rock Pi 4B. Earlier I had Debian and Ubuntu provided by Radxa and recently speed has gone from 115 MB/s to ~12 MB/s. I moved to Armbian which is currently available for download. Before any updates I had 115 MB/s transfer speed. When I updated to Armbian 20.08.11 Focal with Linux 5.8.15-rockchip64 the speed has go down to ~15 MB/s. The bigger change that happened was kernel upgrade. I exclude problems like: PSU (it is over enough), home network (nothing has changed) and SSD speed (checked - 330 MB/s). Has anyone else also observed limited speed rec…

even though I disabled DVFS : $ cat /etc/default/cpufrequtils ENABLE="true" GOVERNOR=conservative MAX_SPEED=1416000 MIN_SPEED=1416000 I had a few random reboot. I disabled zswap and , since I get this kind of trace about it: mars 30 22:15:29 helios64 kernel: ------------[ cut here ]------------ mars 30 22:15:29 helios64 kernel: kernel BUG at mm/zswap.c:1313! mars 30 22:15:29 helios64 kernel: Internal error: Oops - BUG: 0 [#1] PREEMPT SMP mars 30 22:15:29 helios64 kernel: Modules linked in: binfmt_misc softdog veth xt_nat xt_tcpudp xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xfrm_user xfrm_algo xt_addrtype iptable_filter iptable…

Hi. I'm using an OrangePi RK3399 and if the power supply from the 12V barrel jack is removed, the LTE module connected to the mPCIE port dies. Does anybody know how to make the mPCIE port work while on battery? The mPCIE dying is due to the port being powered from the main power supply line VBUS from the barrel jack (before the BQ25700a battery charger IC, according to the board's schematics). I don't know why power is not supplied from VSYS like everything else on the board. So, what I've found is that if I want to power the mPCIE port from the battery, the reverse OTG mode from the BQ25700a battery charger IC would need to be set (allowing voltage to flow from the bat…

L.S. After installing Armbian_20.02.1_Rock64_buster_current_5.4.20.7z on my 4GB rock64 running on SD card - I could run for days 2 processes with "openssl speed" resulting in 2 CPU's 100% busy. - But when I added a third "openssl speed" it only takes minutes to freeze the board. - Further the "ondemand" scaling_governor is active (default setting) I noticed that distributed /etc/default/cpufrequtils contains line: ==> MAX_SPEED=1390000 This value is not in the list with valid values for this CPU : ==> 408000 600000 816000 1008000 1200000 1296000 1512000 After updating this to valid value and restart service …

I successfully booted this one and connected over Ethernet. Haven't checked WiFi yet. However, the observation comparing to the original Rockchip's Jammy image: the serial port goes quiet after the U-Boot fires up the kernel. The bootloader on the board and the _original_ kernel use non-standard 1500000 baudrate serial speed for the console. I haven't looked into Armbian's guts yet, but I assume it's a matter of right kernel boot arguments for this board to actually spit out kernel output over serial. What I'm not sure is if the console can be cloned between serial and UI over HDMI (console on the frame buffer if I'm right). I'm open to…

RK3576 nanopi M5 cannot start Waydrod I am trying to use Waydrod on the nanopi M5, and I am starting it up CONFIG_ANDROID_BINDER_IPC=y CONFIG_ANDROID_BINDERFS=y CONFIG_ANDROID_BINDER_DEVICES="binder,hwbinder,vndbinder" However, during the actual startup of Waydrod, there was a continuous black screen crash and restart. The following is the error log: nano@nanopi-m5:$ waydroid show-full-ui [13:55:56] Introspect error on :1.103:/ContainerManager: dbus.exceptions.DBusException: org.freedesktop.DBus.Error.NoReply: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, th…

Hello everyone, I have installed Armbian Bookworm 23.11.1 (kernel 5.10.110). The fan control does not work. The fan only runs at level 1. None of the many patches I tried worked. The last one tried was this: https://forum.radxa.com/t/guide-on-how-to-customize-you-pwm-fan-curve/17442 I can adjust the fan manually, but the automatic doesn't work. The "policy" file (/sys/class/thermal/thermal_zone0/policy) cannot be permanently changed to "step wise" (logged in as root). After restarting it is back to "user_space"... The access rights are: -rw-r--r--1 root root 4096 Feb 1102:42 policy Owner: = Root Root…

Hi there, i'm trying to getting Armbian working on my RockPi 4B. Installation and everything went fine. Even my Intel 660 2TB NVMe SSD was detected as I booted the SD card Image (created with Etcher). But as I booted the image from eMMC (flashed the image via dd if=image.img of=/dev/mmcblk1); it booted fine so far, but it doesn't detect the NVMe SSD... If I return to uSD Boot, it is detected again... Here is the log output of dmesg | grep nvme from "Boot from eMMC" root@rockpi-4b:~# dmesg | grep nvme [ 2.754457] nvme nvme0: pci function 0000:01:00.0 [ 2.754688] nvme 0000:01:00.0: enabling device (0000 -> 0002) [ 64.489438] …

Hi all, which image should i choose for a LuckFox core3566 ? Thanks

Hello: To compare all available use of this so great card, we could share our uses. For me i se it with : -OpenMediaVault for the NAS function; as file copy save and Torrent -Transmission for the torrent sharing -2 HDDs to save files on USB 3 and 2. And you ? I have a Rock64 1Gb with external power station 5A power

Last FriendlyElec nanopi-r2s image has hardware rng, what about adding it to Armbian? For my nanopi-r2s I patched dtb, compiled kernel module with dkms and managed to make it work with rngd. Amount of enthropy increased from ~2000 with haveged/jitterenthropy to ~4000. The only problem is FIPS failures so I had to run rngd with --ignorefail flag. Here is links to FE github: https://github.com/friendlyarm/kernel-rockchip/blob/2ea3d37e1de559b9af2cd24a71bb538dddc1365a/arch/arm64/boot/dts/rockchip/rk3328.dtsi#L250-L259 https://github.com/friendlyarm/kernel-rockchip/blob/2ea3d37e1de559b9af2cd24a71bb538dddc1365a/arch/arm64/boot/dts/rockchip/rk3328-nanopi-…

Just got the notification to update After the reboot all seems good - iSCSI is now supported out of the box. Will wait for the official images to be pushed to the downloads page to try and setup a clean install + overlay FS to document my customizations.

Hello ! i'm trying to enable the SPI interface on a OrangePi4B board using Focal latest stable build, so I edit `/boot/armbianEnv.txt` to add these lines : overlays=spi-spidev param_spidev_spi_bus=0 But after rebooting, I'm unable to access to the board anymore (No IP address is assigned to the board by the DHCP server). What's wrong ? Is there any additionnal steps ? FYI, I also tried to enable SPI using armbian-config tool but it doesn't work neither. As this tool doesn't even specify the `param_spidev_spi_bus` parameters which is required according to the overlay README.

Hello, My NAS becomes unresponsive every time I run a somewhat CPU-intensive task: indexing photos in photoprism, importing followings in Mastodon… or just browsing Mastodon. Is it expected of the Rockchip RK3399 or can I improve the situation with the right CPUfreq config ? For context, here is my CPUfreq config and kernel (I have yet to update): axel@helios64:~$ cat /etc/default/cpufrequtils ENABLE="true" GOVERNOR=performance MAX_SPEED=1200000 MIN_SPEED=1200000 axel@helios64:~$ uname -a Linux helios64 5.10.21-rockchip64 #21.02.3 SMP PREEMPT Mon Mar 8 01:05:08 UTC 2021 aarch64 GNU/Linux Thanks!

Could anyone help me to enable display with Armbian? I just can’t figure out why it doesn’t work. I don’t see the backlight turning on either. What do I have to change? I have tru to add a custom dts on kernel but don't work

qemu-system-aarch64 -M virt -cpu host -enable-kvm ... only works reliably when 1 CPU core ( -smp 1). When a VM has 2 cores, it randomly worked I experienced. If virt-manager pick 2 equal cores, VM UEFI/BIOS/kernel runs OK, but if a Cortex-A76 and Cortex-A55, all sorts of exceptions are shown or just lockup 2x or 1x 100% usage. In order to still be able to use KVM, start qemu-system-aarch64 as follows: taskset --cpu-list 4-7 qemu-system-aarch64 -M virt -cpu host -enable-kvm -smp 4 ... or taskset --cpu-list 0-3 qemu-system-aarch64 -M virt -cpu host -enable-kvm -smp 4 ... Mainline kernel 6.8.x or later does not have this problem. I…

Hi Folks, I'm testing the M4 board with Armbian Buster, I'm having the following problems with the GPIO: How can I use gpio without root? I've checked and there isn't a /dev/gpiomem device so I can give permissions to other users. Only a few of the GPIO pins can be set. Most of them don't show up as configurable through gpio readall. A few of them show as ALT and although I can change their mode (input / output), I cannot change/read their value, it seems those are shared with i2c-3, so this can be the problem, but I don't know how to disable i2c-3 and use them. Also, can all the 6 cores work at the same time? Or the BIG.little architecture…

Board orangepi4b uname -a Linux orangepi4 5.10.63-rockchip64 #21.08.2 SMP PREEMPT Wed Sep 8 10:57:23 UTC 2021 aarch64 GNU/Linux Got syntax error on armbianmonitor -u: armbianmonitor -u "System diagnosis information will now be uploaded to syntax error at or near "" Please post the URL in the forum where you've been asked for" set -x armbianmonitor -u Network/firewall problem detected. Not able to upload debug info. Please fix this or use "-U" instead and upload whole output manually attached file err is output from armbianmonitor -U Anyway I had to reflash after a microSD broke. Previously I used 4.4.…

Hello, I'm running Armbian Community 26.8.0 / kernel 6.18.35-current-rockchip64 CPU is quite hot, 56-60 C even when idling; it used to be around 43-45 C on the BSP image. I have a passive cooler mounted. So I added a fan and connected to the FAN header, but it does not spin. I seem to remember a "fan control" overlay within armbian-config for other boards, but it's not present here. Any suggestion? It's a nice board but it's too hot with Armbian 😕 Thanks!

I am using a Linux rockpi-4cplus with 5.15.93-rockchip64 (bullseye). I plan to use SPI1 (GPIO1_A7, GPIO1_B0, GPIO1_B1, GPIO1_B2), and then add in a 2nd device on this SPI bus via a custom CS GPIO pin (GPIO4_D5). I could not find the corresponding script file (.DTS) online (on Github) associated with the object file (rockchip-spi-spidev.dtbo). Please could someone point me to it - I can only find files for "sunxi-DT-overlays". So I decided to create my own DTS file, as follows: /dts-v1/; /plugin/; / { fragment@0 { target = <&spi1>; __overlay__ { #address-cells = <1>; …

Hey, I have uninstalled cron from my system completely, but I just thought I might help contribute, even just a little, by making some services and timer files to replace the ones in these folders: /etc/cron.d /etc/cron.daily /etc/cron.hourly /etc/cron.weekly Now keep in mind that I have not fully tested any of these yet! I would appreciate feedback in testing these, since most of these I won't even use on my system. I barely even use the armbian-config utility at all, so... yeah... The files in question are these. Let me know if I should add more: armbian-truncate-logs armbian-updates armbian-ram-logging The…

I know this is going into the wrong section of the Rockchip forum but I don't see a parent category for anything like "Rockchip - Other". I can outline the issue in this thread, but I would rather have this post get moderated and get directed into the right spot to ask about specifically the Turing RK-1 or more generally "weird boards that have RK3588s that aren't already listed".

Please, I need an img of Armbian compatible with the following: RK3399T and with HDMI. I have tried all versions of Armbian and they do not work. Some do, but the problem is that it does not display an image. I believe it could be the HDMI. The most preferable versions for me are Armbian Noble or Bookworm. The problem also occurs during updates. After updating, the wireless does not work. If there is a version with this fixed, I would be grateful if someone could post a version for me, as up-to-date as possible. My Radxa is a Rock Pi 4Plus v1.73. With a 256GB microSD, I need an img of Armbian that is compatible with wireless and HDMI. If anyone can send me the link, I wou…

Hello together, I'm using this board inclusive PoE - Board with the ARMBIAN - Image. Now I have a question about the FAN on this PoE - Board. Does anyone know, how can I enable the FAN permanently, because the heat from the CPU is to high and I don't want to kill this board with overheating..... Best regards Matthias

I'm trying to get this rockpro64 board to boot off of pxe/nfs. I'm able to get it to boot into armbian and to the point where it asks for the new root password. But something happens on the device where the network gets disabled which stops the NFS connectivity and the rest of the system with it. All traffic stops on the device and it becomes unreachable. NFS traffic stops, it no longer responds to pings, etc. It's not entirely frozen, for example it prints kernel messages to console if the ethernet is pulled. And after a few minutes the nfs connection times out and it starts printing this over and over. It always happens about 75 seconds…

Hi, My PC doesn't recognize my tinkerboard S. Would this be a problem with my tinkerboard or my PC setup? The red led is on when I connect the power cable. A USB-C cable connects the tinkerboard to the PC. However, the PC gives no response when the USB-C cable is plugged in nor do I see anything under device manager indicating a COM port connection. Any feedback would be appreciated. Thank you.

Hello, I flashed the latest KDE version to the SD card of my Orange Pi 3B using Armbian Imager, but for some reason the USB ports are not working at all. There's no power coming from the USB ports, and the keyboard backlight isn't working at all. What could be the reason? Can you help me? I've never experienced anything like this before.

Hello, I stupidly upgraded without thinking about the possible consequences. 6.1 to 6.2. Ive had my /home on nvme. But the nvme drive is no longer recognized. I have managed to get my display back, Im not sure about my panel yet. I had restore my device tree overlay. Ive hacked around losing the nvme. But it would be good to get my nvme drive back. I've got some work to do to deal with not having that storage and what was on it. Can anyone point me in the right direction? Alternatively, maybe it's not too hard to roll back to 6.1? I haven't contemplated that.

Hi, I'm seeing the following error in Chromium when trying to play youtube, the video loading screen never opens the video. I have installed chromium-browser (+libv4l-rkmpp, +ffmpeg, +rockchip-multimedia-config) from the ppa: https://launchpad.net/~liujianfeng1994/+archive/ubuntu/rockchip-multimedia My OS version is Armbian 23.08 Jammy. When using FFplay the rkmpp hardware decoder is able to correctly decode h264 and hevc content, so there does not seem to be a problem with rkmpp. Any thoughts on what could be wrong? I found another guy who had the same issue, but there was no resolution: https://github.com/armbian/build/issues/5384 Faile…

Hi, New builds (hosted by armbian AND self compiled) of armbian do not post / boot at all. Completely black screen on hdmi outpout. Ethernet link lights do not light up. It's like there is no bootable media inserted (it definitely is). I have tried many combinations of different kernels and ubuntu versions. None work. Board: nanopc t6 8gb ram They used to work, and archived copies from november 2023 work, booting perfectly. I also compiled one back then which also worked. But now this is not working any more. Does anyone have idea why it no longer posts? Thanks Luke

I've gotten the following messages/error the past 2 mornings. Any ideas what the problem is? CRON-APT RUN [/etc/cron-apt/config]: Sat Jan 22 07:35:28 EST 2022 CRON-APT SLEEP: 1394, Sat Jan 22 07:58:42 EST 2022 CRON-APT ACTION: 0-update CRON-APT LINE: /usr/bin/apt-get update -o quiet=2 E: Failed to fetch https://stpete-mirror.armbian.com/apt/dists/buster/main/binary-armhf/by-hash/SHA512/5d6932f3c06c2c055d95b7a09e2bd4686b4bf8756d10bb52c9c9b96b33f1adde18116d55152d9c103d1e24ef83acecdddfc32a945b60812b6818b2be5a48458c 404 Not Found [IP: 130.225.254.116 80] E: Failed to fetch https://imola.armbian.com/apt/dists/buster/main/by-hash/SHA512/1b7ba13d5e752b8c1035070d43466…

I have encountered an issue on my Rock Pi 4C+ where a USB 3.0 drive plugged into the lower USB 3.0 port is recognized as USB 2.0 speed if inserted before boot. However, if I hot-plug the drive after boot, it switches to USB 3.0 speed as expected. Tested Images: Community Images: Armbian_community_24.11.0-trunk.202_Rockpi-4cplus_noble_current_6.6.53_gnome-kisak_desktop.img.xz Armbian_community_24.11.0-trunk.167_Rockpi-4cplus_noble_current_6.6.52_gnome-kisak_desktop.img Official Image (No Issue): Armbian_23.11.1_Rockpi-4cplus_bookworm_current_6.1.63.img Has anyone else experienced this, or found a workaround for the community versions? …

hello, Today after an apt update, apt upgrade, my orange pi max 5 goes to armbian 2.5.0 trunk 187 with vendor kernel 6.1.99 but i loose the wifi (ethernet still work) any idea how to solve this ? regards,

I got the following error message when I try to install firmware-misc-nonfree_20190114-2_all.deb from the upstream debian repository. ... Get:1 http://deb.debian.org/debian buster/non-free arm64 firmware-misc-nonfree all 20190114-2 [3,338 kB] Fetched 3,338 kB in 1s (4,022 kB/s) Selecting previously unselected package firmware-misc-nonfree. (Reading database ... 77206 files and directories currently installed.) Preparing to unpack .../firmware-misc-nonfree_20190114-2_all.deb ... Unpacking firmware-misc-nonfree (20190114-2) ... dpkg: error processing archive /var/cache/apt/archives/firmware-misc-nonfree_20190114-2_all.deb (--unpack): trying to overw…

This feels really awkward, since I already asked about this problem in another part of the forum, but the bug reporting system says that bugs should be reported by posting in this section of the forum. Feel free to merge the other thread into this one if you want. (Link at bottom.) Linux kernel 5.15.x appears to have a serious regression that prevents GPIO from working correctly on the Rock Pi 4B+ (board version 1.73). Summary: All GPIO4A pins are nonfunctional: Pin 12 stuck off Pin 35 stuck off Pin 36 stuck off Pin 38 stuck off Pin 40 stuck off GPIO1B is nonfunctiona…

Hello, When I try to build any image for 5B with the Edge kernel and Ubuntu, it will not boot. No matter if desktop or server, both green and blue LEDs are permanently on, and the board doesnt start. If I choose Mainline or Midline kernel, it works. I used the official build enviroment, host is Ubuntu22, all updated & upgraded https://github.com/armbian/build

Hi everyone! I got a Radxa E25 network computer with two 2.5GBit ethernet ports. The first one is coming up, the second one, however, does not. After comparing to the Debian Bullseye image by Radxa, I figured they don't bring the second port up either but for a different reason. Finally, I found a release on Radxa's Github that brings up both ports. I'll give you the output of that one and the Armbian and the Radxa E25 Bullseye images marked accordingly. The three images are: "b1 (rsdk)", "radxa-e25_bullseye_cli_b1.output.img.xz", works, source: https://github.com/radxa-build/radxa-e25/releases Radxa E25 B…

Hello All, I have bought banana PI m5 pro SBC, but there is no wiringPI developed for this edition and armbian-config doesnt show UART,i2c enabling method may I know how to develop wiring pi for this edition and how to enable i2c and uart manually

Hello everybody! I write on this topic because i'm searching for few weeks a solution with dd command to make a disk image backup, but I don't find a conclusive solution, so... Firstly I send dd command. Disque /dev/mmcblk0 : 29,7 GiB, 31914983424 octets, 62333952 secteurs Unités : secteur de 1 × 512 = 512 octets Taille de secteur (logique / physique) : 512 octets / 512 octets taille d'E/S (minimale / optimale) : 512 octets / 512 octets Type d'étiquette de disque : dos Identifiant de disque : 0x53d4dbd7 Périphérique Amorçage Début Fin Secteurs Taille Id Type /dev/mmcblk0p1 32768 10504191 10471424 5G 83 Linux Disque /dev/s…

As per the title: Using the image Armbian_22.11.2_Rock-5b_bullseye_legacy_5.10.110 Formatting an nvme ssd partition as BTRFS and running the armbian-install utility, install using SPI to boot, targeting ththe btrfs partition, and selecting BTRFS in the prompt results in a failure to boot. Reformatting that same partition as EXT4 and rerunning armbian-install (and making no changes to the data loaded to /de/mtdblock0) targeting the EXT4 partition, and the device boots using the SPI loader.

Dear maintainers, thank you very much for your fantastic job! I di know how difficult to support different Chinese dev. motherboards. But I would like to ask you for a help: I use TinkerBoard S Rel.2.0 with latest armbian available for the board. It works perfect with HDMI 7inch screen from BigTreeTech company (BTT). However, I would like to use it with BTT 4.3inch DSI Display, which is developed for Raspberry Pi. BTT provided a 43DPI driver guidance for Raspbian which is here: bigtreetech/TFT43-DIP: DPI Driver, but it might work for kernel > 4.5 or 5.x. Moreover, in your distro there is no config.txt but there is the armbianEnv.txt. So, it is obvious,…

Using Armbian bionic (Ubuntu 18.04) on a Orange PI4, hostapd does not run as service. Neither at startup, nor when stopped and restarted manually. However, starting it from command line works fine? Logfiles (syslog, journalctl) do not show anything helpful. root@IA216:~# service hostapd status ● hostapd.service - LSB: Advanced IEEE 802.11 management daemon Loaded: loaded (/etc/init.d/hostapd; generated) Active: active (exited) since Sun 2020-10-18 12:54:28 CEST; 8h ago Docs: man:systemd-sysv-generator(8) Process: 31481 ExecStop=/etc/init.d/hostapd stop (code=exited, status=0/SUCCESS) Process: 31542 ExecStart=/etc/init.d/ho…

Hi, does anyone know how to get this working please? Thanks.

I was cleaning storage room of customer and found this device in sealed box. Owner of the box say it was rarely used and i can keep it. Only thing broken was the battery. I replaced it temporarily with unused smartphone one. The device boots and is almost new condition. SoC RK3066 = (ARM Cortex-A9 Dual-Core @ 1.6Ghz + ARM Mali400MP4) RAM 1GB = (Four Chips on image are Hynix [H5TQ2G83CFR-H9C] -2gb) Storage 16GB = (Toshiba TH58TEG7DCJTA20 - Nand Flash MLC 16GB) Uart RX/TX pads on board I make this topic as i want to ask more experienced people here if this SoC can run "some" version of Armbian. Thank you in advance

I can use echo 0 >/sys/class/leds/status/brightness to turn off the status led (blinking blue one, but I was to turn off the bright ass green one. I assume this is mmc1::, but I cannot turn it off.

I noticed today that there are no 23.02 images for the rockpi-4c. The images exist for the 4a, 4b and 4cplus variants but not the 4c. The 22.11 images are the latest for the 4c. The reason I noticed is that on the downloads page for the rockpi4 it is still showing 22.11 as the current images because that page is showing the 4c info, with links provided to the other variants. The fact that it still showed 22.11 caught my eye.

Using Image "Armbian_community_25.5.0-trunk.185_Orangepi5-max_bookworm_current_6.12.17_minimal.img.xz" on orange pi 5 max, the fan connected to the designated 1.25mm pwm fan connector won't do anything at all regardless of the cpu load. Just to verify the connector was fine I tested the same on the same board with the same fan, using orange pi's image "Orangepi5max_1.0.0_ubuntu_jammy_server_linux5.10.160" and the fan worked fine under cpu stress.

Hi, after doing an "apt upgrade" on my Luckfox Lyra Zero W running "Armbian 26.11.0 Minimal (Trixie)" on kernel 6.1.115-vendor-rockchip, I got an error mid-upgrade: The aic8800-usb driver did not recompile for the new kernel version: Setting up linux-image-vendor-rockchip (26.11.0-trunk.37) ... Armbian 'linux-image-vendor-rockchip' for '6.1.172-vendor-rockchip': 'postinst' starting. The kernel is built without module signing facility, modules won't be signed Autoinstall of module aic8800-usb/5.0+git20260123.5f7be68d-8 for kernel 6.1.172-vendor-rockchip (armv7l) Building module(s)....................(bad exit status: 2) Failed command: make -j3 KERNELRELEASE=6.1…

I just cannot access spi on my Rock64. I read a couple posts of it but none works out for me I'm running Armbian 22.05.3 Focal with Linux 5.15.52-rockchip64 on it. Tried enabling spi-jedec-nor and spi-spidev overlay, but with none of them I get output when executing ls /dev/spi*. Is it maybe a hardware issue, reading this post suggests that to me: https://forum.pine64.org/showthread.php?tid=5473&pid=34616#pid34616 But I cannot make much sense out of it. Can anyone help me get spi working?

Hello! First time poster. Been slowly learning linux over the years. Kind of a noob but maybe at an intermediate to advanced noob level. I've been having trouble upgrading firmwares. As title says, 24.11.3 breaks display. Luckily I was able to SSH in and determine 24.11.1 is functional. I'm not sure how to tackle this. I can tell you, I have many errors on startup which i have attached. I should note I do have issues interfacing with this display. While resolution is read by armbian correctly, the refresh rate is NOT. I use a capacitive touch display that can support 1200x600@60hz. Armbian attempts to use only 75hz which does not play nice. I have attempted to…

I solved this for myself and created an account so I could post it here. I saw a few posts going back years which said either this can't be done on an Orange Pi 5 or they had no replies. The problem: I wanted to boot my system from the EMMC but leave my large capacity SD card plugged in for extra storage. The script in armbian-config worked as expected. However, leaving the SD card inserted caused the board to continue to boot from it. Wiping the SD prevented the board from booting at all. I could eject the SD card, boot from the EMMC and then re-insert the SD card to use it as storage, but that's annoying. The solution: I noticed …

Hello, As stated recently I had setup a Rock5B with Jammy/Mutimedia and had issues with a 2160P / 3840 x 2160 screen. Initially bootup would show a flickering screen. Adding the custom resolutions via cvt/xrandr and setting line in boot env: "exrtaargs-video=HDMI-A-1:3840x2160@60" fixed that issue However the initial login screen and logout screen resulted in a vibrant flickering background . This was on a Sceptre 50" TV and other perihperials would normally work fine. This took a while to figure out because I was confusing my active desktop provider and Gdm was being used: https://askubuntu.com/questions/91…

Hello guys! 🙂 I used to configure latest Armbian @ Orange Pi 5 B in such particular way: https://dragonserw.ru/arm64:orangepi-5. The problem is: Gnome settings does not save. As for now, I extremely need to set my screen off after 15 minutes of inactivity. How can I do it from command line? My hardware: dragonserw@orangepi5:~$ inxi -b System: Host: orangepi5 Kernel: 5.10.160-legacy-rk35xx arch: aarch64 bits: 64 Desktop: GNOME v: 43.6 Distro: Armbian GNU/Linux 12 (bookworm) Machine: Type: ARM System: Orange Pi 5B details: N/A CPU: Info: 3x 4-core Model N/A [MCP AMP] speed (MHz): avg: 2064 min/max: 408/1800:2352:2304 Graphics: Device-1: disp…

Hello, i'm using the NanoPC-T4 with Armbian Bookworm (23.8.1 with Linux 6.1.63-current-media) Kernel and Mainsail/Klipper is running on in smooth and gently. Since i want to record timelapse videos, i've decided to buy the orginial "FriendlyELEC Cam1320 PI Camera Module" based on the OV13850. I've connected it in the expectation that it should work together. But the System is not detecting the camera module. $ v4l2-ctl --list-devices rockchip,rk3399-vpu-enc (platform: hantro-vpu): /dev/video2 /dev/video4 /dev/media1 rockchip-rga (platform:rga): /dev/video0 rkvdec (platform:rkvdec): /dev/video3 /dev/media0 rockchip-iep (platform:rockchip-i…

Some of you may be interested to not only store your data on Helios64 but to also run other services on it - such as home automation. One of the popular platforms for home automation in Europe - and in Germany in particular - is "Homematic". They opened up their ecosystem some time ago and allow others to implement their own components (some excellent examples from Jérôme are here). As of yesterday - with the latest commit - it is possible to run a virtualised "ccu3" base station for that platform, called pivccu, with support for a detached antenna module (RPI-RF-MOD) coupled to Helios64 (and Armbian 20.11 kernel 5.9.10) through a tcp/ip network using a dedic…

Howdy, Just wanted folks to know that debian bullseye is generally getting what I need done. Specially Welcome to Armbian 22.11.1 Bullseye with Linux 5.10.72-rockchip-rk3588 is working. It is working headless just fine. Now what is not working for me. The HDMI is not showing up at all. Between my KVM and ultra wide monitor it may not be an OS issue. SD-card boot is the way I am going. Manual partitioning of the NVME was needed to install. It felt like I needed to reboot a few times to get the NVME to boot. Overall it was a better experience than the experience on the Firefly station P2 competing with Station OS. Thanks…

I use orangepi 4B. I use console Ubuntu with kernel 4 from Xunlong And my CPU Temperature (by htop) is about 70°C I use console armbian with kernel 5 (Governor = powersave). And my CPU Temperature is about 79°C Why so? I want to get 70°C in armbian too.

At least for legacy kernels, it possible to use Radxa's overlay for the 25W PoE hat. This should allow you to use the PWM fan on the PoE hat. #!/bin/bash # Install linux headers apt-get install -y linux-headers-legacy-rk35xx # Download and compile the device tree overlay h=/usr/src/linux-headers-$(uname -r) wget https://raw.githubusercontent.com/radxa/overlays/f2679399887b678dec62cb50cb44c767a2bcb293/arch/arm64/boot/dts/rockchip/overlays/rock-5b-radxa-25w-poe.dts cpp -nostdinc -I $h/include -I $h/arch -undef -x assembler-with-cpp rock-5b-radxa-25w-poe.dts | dtc -I dts -O dtb -o rock-5b-radxa-25w-poe.dtbo # Install device tree overlay mkdir -p /…

Installed the image Armbian_20.08.1_Rockpi-4b_buster_current_5.8.6.img.xz . Then, in armbian-config -> Software, I had installed linux headers + source. I got two new directories: linux-headers-5.7.15-rockchip64 linux-source-5.7.15-rockchip64 If I execute: uname - r I get: root@pi:~# uname -r 5.8.6-rockchip64 The kernel version and installed source/headers are not the same, so they are useless. How to get the correct source/headers? EDIT: When first boot, the OS asked for locale/timezone settings, I did hit ENTER as default and it set the locale language to Slovene. When doing apt-get up…

GPU can perform far better than CPU cores for certain applications. Computer vision is one of them. Orange Pi 5 GPU has 64 shading cores. It runs up to 19 times faster than 8 CPU cores combined for computer vision models. Armbian on Orange Pi 5 supports OpenCL driver for compute-intensive GPU programs. To install OpenCL on Orange Pi 5 Armbian, follow the instructions in the following link; Install OpenCL on Orange Pi 5 Armbian

Per the title, I was able to extract an ftb file and convert it to dtb and dts file. I would like to use the community build framework and build Armbian for SV06 Ace. The initial plan was to base the new board/*csc files on other rk3308b boards; sakurapi and rock-s0 and then pull configuration values from the OEM dts file. I'm confused about the dts structure in Community builds and the proper locations for defconfig, dts and dtsi files. I've worked with the files in OpenWRT where they are rigidly structured - something that would be a monumental task for Armbian community builds. The OEM dts file does not use any includes/dtsi fi…

Hi, Today i upgrade to 24.5.3 when apt full-upgrade proposed me to upgrade and return of crash 😞 Tuned rk3399-kobol-helios64.dtb L2 hs400 file seen to be update... i copy paste file used with 6.6.32... I replace rk3399-kobol-helios64.dtb.org (with 24.5.3) with my rk3399-kobol-helios64.dtb post in this forum sha256sum: e90ebceb4b2f213818f320dfc61c90e556e0470702afa4117b0302bffc3d2cce rk3399-kobol-helios64.dtb sha256sum: 0eb03b645ab8125a4460d4509df32050188a8bdf2b5065f4321748b4eb6f6b4d rk3399-kobol-helios64.dtb.org It's seem to be not crash now... Keep in touch. UPDATE: i confirm, after update to 24.5.3…

I’m using an Orange Pi 3B running Armbian Trixie Minimal as a headless SBC. It has been working fine for a couple of months, but after a recent reboot, it failed to connect to the network. After connecting an HDMI cable to troubleshoot, I realized the system is no longer auto logging in; it gets stuck at the login screen. Once I log in manually, I found that the wired network (Ethernet) isn't working at all, though wireless is functioning fine. I even tried flashing the latest image from the website, but the issues persist. To summarize, I have two main problems: - Wired connection (Ethernet) is not working. - The system no longer auto-logs in after bo…

Hi, I would like to enable 4K output for my new monitor connected to a NanoPi M4V2 running Armbian based on Ubuntu Bionic legacy. I have searched for some days now, but could not find a solution. I would be very glad, if someone could just point me to the right direction on how to configure the Armbian desktop environment for 4K.

People, help install the system on eMMC Rock Pi 4 Bv 1.3. Installed the system "Arabian_20. 05.4_Rocky-4b_focal_current_5. 4. 46_desktop" on SD, installed eMMC on the Board, started the system and updated it. Then I tried two options for transferring the system to emc: 1) (https://docs.armbian.com/User-Guide_Getting-Started/) sudo nano-sata-install - dd if= / dev/zero of= / dev/mmcblk2 bs=1024 seek=8 count=1; 2) armbian-config - boot from SD, system on SATA / USB. But both options failed. I read here two branches with a discussion of this problem, but I did not succeed. But this is because I am not a very experienced Linux user. Please give me a n…

Hi, I installed Armbian Bookworm Minimal CLI on my Rock 5b and followed the instructions on this post to get the fan to work properly. Specifically, git clone https://github.com/lukaszsobala/fan-control-rock5b cd fan-control-rock5b make package sudo dpkg -i fan-control*.deb sudo systemctl enable fan-control systemctl start fan-control However, the software won't start. When trying to run it manually, I get, $ sudo /usr/sbin/fan-control pwmchip: 0 gpio: 0 pwm-period: 20000 temp-map: speed: 0, temp: 20, duty: 8400, duration: 10 speed: 1, temp: 50, duty: 9600, duration: 2 speed: 2, temp: 60, duty: 10800, duration: 2 speed: 3, temp: 70, …

Good afternoon. I have a Rockchip 3566 tablet.oscal pad 70 wifi I'm writing using Google Translate, so there may be some inaccuracies... I apologize for that! motherboard R863T-RK3566-DK-V1.0 wifi module wxt42j1001s - driver for android only I understand it's probably very difficult...isn't the processor too old for our times? Or is installing Armbian probably not an option? Thanks from the bottom of my heart to everyone who responded.

Hi! I'm having trouble with hdmi display and armbian focal on rock64. All works with simple office hdmi displays but fails with an open frame display connected using hdmi->dvi cable. Even the boot messages do not display and the display goes into power saving mode. Here are some of the outputs: rock64@rock64:~$ cat /sys/class/drm/card0/card0-HDMI-A-1/status connected rock64@rock64:~$ cat /sys/class/drm/card0-HDMI-A-1/status connected rock64@rock64:~$ dmesg | grep hdmi [ 4.484419] dwhdmi-rockchip ff3c0000.hdmi: Detected HDMI TX controller v2.11a with HDCP (inno_dw_hdmi_phy2) [ 4.485826] dwhdmi-rockchip ff3c0000.hdmi: registe…

Hello everyone, I'm trying to build a kernel so that OTG USB interface with Type-C connector could be accessed as usb0 network interface . If someone managed to solve this - please, share your experience .

I tried the stable Arabian image for rock 64 and found out that full HD video is played with strong brakes, when playing HEVC image is missing How to force video to be reproduced normally, maybe I don't understand something ?

Hello, I have using "rock64" board. I have installed gstreamer and mpp for rockchip. Can you provide me exact pipeline for gstreamer in which we can use mpp-hardware codec? Thanks and Regards, Kishan Patel.

I'm working on enabling secure boot on Orange Pi 4B. So far I was able to burn eFuses, sign rk loader, a trust image, and a uboot image. To extend secure boot chain to the Linux Kernel, I've enabled FIT_SIGNATURE in u-boot, and manually built FIT image (Linux Kernel, initramfs(initrd), and a kernel DTB). Now I want to add FIT image creation to the Armbian build system. What is the correct place/script to do it?