Rockchip

If Helios/Kobol is out of business - What "specs" should I use to define a replacement board - a rockchip 3399 board with the dimensions ? Help please -- (I'm getting an increased number of memory errors and of late an increased number of USB faults) I'm running (at the moment) - the system as a simple NAS with exported NFS4 volumes - the entire lot of 5 drives are formatted at BTRFS -- I'm working on archiving the data off and once done I'll format all as ext4 and try using simple RAID. Rich Leonard

Hi, i bought a nanopc t4, then i installed armbian on it's eMmc , after starting os, i plug in a usb flash to it's usb2.0 ports(both usb 2.0 ports) but not working but when i plug in the usb flash to it's usb port 3.0 it will be work, i tried this issue with mouse and keyboard usb and some another usb flashes that has usb 2.0 compatibility, can anyone help me to setup my nanopc t4 usb 2.0 ports?

Hi, I upgraded to the stable version of Debian (Trixie) Armbian Linux 6.18.23-current-rockchip64. And the USB 3.0 port stopped working. Other USB 2.0 works fine. orangepi3b:~$ lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 152d:0578 JMicron Technology Corp. / JMicron USA Technology Corp. JMS578 SATA 6Gb/s Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Found…

Hi, New builds (hosted by armbian AND self compiled) of armbian do not post / boot at all. Completely black screen on hdmi outpout. Ethernet link lights do not light up. It's like there is no bootable media inserted (it definitely is). I have tried many combinations of different kernels and ubuntu versions. None work. Board: nanopc t6 8gb ram They used to work, and archived copies from november 2023 work, booting perfectly. I also compiled one back then which also worked. But now this is not working any more. Does anyone have idea why it no longer posts? Thanks Luke

I've got an OrangePi based on the Rockchip RK3399. The official OrangePi Debian version I'm using is Armbian-based I believe and uses a 5.10 kernel. I want to upgrade the kernel as later ones support some video features of the RK3399 I want to use. The problem is, if I build the kernel using the standard vanilla method from kernel.org sources even using the same config file from the running kernel without changing anything (make olddefconfig), the device won't boot when I symlink the new kernel to /boot/Image. Interestingly, it does boot if I symlink the new initrd to /boot/uInitrd, but only with the old kernel. Is there something special I need to do to the k…

I loaded both the Raxda Debian OS and the Armbian OS on the Rock Pi 4A+ (4GB RAM / 32GB eMMC) integrated eMMC chip and both boot fine. I then ran the Phoronix pts/scikit-learn benchmark and got a big discrepancy in performance: https://openbenchmarking.org/result/2112285-NE-2112281NE08 The Raxda Debian OS (noted as rockpi4a+raxdadebian in the benchmark) performs basically the same as the Rock Pi 4A version (noted as rockpi4-rk3399 running Armbian), as expected. The Armbian OS (tested multiple times as rockpi4a-emmc, rockpi4a+, rockpi4a+governor, and rockpi4a+armbian) all perform terribly. Thoughts?

I have zero room on the root of my helios64? I literally just installed OMV made a raid 5 and setup my shares. Afterwards I setup Transmission and suspect that might be my problem. Any thoughts to locate exactly what is killing my flash memory. I tried df -h and du -sh /. this didn't point me to anything specific.

Hello, I stupidly upgraded without thinking about the possible consequences. 6.1 to 6.2. Ive had my /home on nvme. But the nvme drive is no longer recognized. I have managed to get my display back, Im not sure about my panel yet. I had restore my device tree overlay. Ive hacked around losing the nvme. But it would be good to get my nvme drive back. I've got some work to do to deal with not having that storage and what was on it. Can anyone point me in the right direction? Alternatively, maybe it's not too hard to roll back to 6.1? I haven't contemplated that.

Hi all, is it possible to boot from an NVME without a sdcard ?

Using Image "Armbian_community_25.5.0-trunk.185_Orangepi5-max_bookworm_current_6.12.17_minimal.img.xz" on orange pi 5 max, the fan connected to the designated 1.25mm pwm fan connector won't do anything at all regardless of the cpu load. Just to verify the connector was fine I tested the same on the same board with the same fan, using orange pi's image "Orangepi5max_1.0.0_ubuntu_jammy_server_linux5.10.160" and the fan worked fine under cpu stress.

Hi! How can I install the edge kernel while still being able to boot armbian and keeping the built-in wireless module working? Is there any firmware for this module at all for kernel 6.2?

Just got the notification to update After the reboot all seems good - iSCSI is now supported out of the box. Will wait for the official images to be pushed to the downloads page to try and setup a clean install + overlay FS to document my customizations.

EDIT: Just realized I posted this in the bug tracker forum. My apologies! See:

Current build hangs whilst booting , any ideas anyone ? DDR Version 1.25 20210517 In soft reset SRX channel 0 CS = 0 MR0=0x18 MR4=0x1 MR5=0x1 MR8=0x10 MR12=0x72 MR14=0x72 MR18=0x0 MR19=0x0 MR24=0x8 MR25=0x0 channel 1 CS = 0 MR0=0x18 MR4=0x1 MR5=0x1 MR8=0x10 MR12=0x72 MR14=0x72 MR18=0x0 MR19=0x0 MR24=0x8 MR25=0x0 channel 0 training pass! channel 1 training pass! change freq to 416MHz 0,1 Channel 0: LPDDR4,416MHz Bus Width=32 Col=10 Bank=8 Row=16 CS=1 Die Bus-Width=16 Size=2048MB Channel 1: LPDDR4,416MHz Bus Width=32 Col=10 Bank=8 Row=16 CS=1 Die Bus-Width=16 Size=2048MB 256B stride channel 0 CS = 0 MR0=0x18 MR4=0x1 MR5=0x1 MR8=0x10 MR12=0x72 MR14=0x72 MR18=0x0 MR…

Hi everyone! I got a Radxa E25 network computer with two 2.5GBit ethernet ports. The first one is coming up, the second one, however, does not. After comparing to the Debian Bullseye image by Radxa, I figured they don't bring the second port up either but for a different reason. Finally, I found a release on Radxa's Github that brings up both ports. I'll give you the output of that one and the Armbian and the Radxa E25 Bullseye images marked accordingly. The three images are: "b1 (rsdk)", "radxa-e25_bullseye_cli_b1.output.img.xz", works, source: https://github.com/radxa-build/radxa-e25/releases Radxa E25 B…

I've downloaded this but there are a few issues. The verification procedures: Verify GPG signature: gpg --verify Armbian_20.05.2_Nanopi-r2s_buster_current_5.4.43.img.asc Verify image file integrity: sha256sum --check Armbian_20.05.2_Nanopi-r2s_buster_current_5.4.43.img.sha should include the .xz Verify GPG signature: gpg --verify Armbian_20.05.2_Nanopi-r2s_buster_current_5.4.43.img.xz.asc Verify image file integrity: sha256sum --check Armbian_20.05.2_Nanopi-r2s_buster_current_5.4.43.img.xz.sha However with the gpg gpg --verify Armbian_20.05.2_Nanopi-r2s_buster_current_5.4.43.img.xz.asc gpg: assuming signed data in 'Armbian_20.…

Hello, Some weeks ago, I installed the "under development" version. File was named Armbian_22.11.0-trunk_Odroidm1_kinetic_edge_6.1.0-rc5.img.xz Now, I see that the "advertised" version is a rolling release armbian 22.11 Jammy. Based on this (https://wiki.ubuntu.com/Releases) page kinetic is an earlier version than jammy. If I scroll down the page ( https://www.armbian.com/odroid-m1/ ) , I see a kinetic rolling weekly release. I suspect that the kinetic is an unstabled release while Jammy 22.11 is. Please can you confirm/explain? If yes, is there a way to "downgrade" to the stable version? Thanks …

Hey I'am searching the Linux kernel headers for 4.4.162-rockchip64 only have found the 4.4.152 can any one help me? thanks

Hi community, I am experiencing an issue reinstalling Armbian on my Helios64. I tried all methods including booting from an SD card, flashing the image onto the eMMC directly but every time I boot, I get kernel panic (flashing status light). I also can't connect to the USB via TTY to diagnose the issue. My macbook keeps detecting the /dev/tty.usbserial-DT03OEIM and the next second it is gone. I wanted to install the original Buster image but I cannot find it anymore in any of the archives. It's kind of disappointing because what's the purpose of an archive then if not hold on to an image for a few years. My current theories…

My audio volume was very very low, and very annoyingly I had to boost to 200% 300% which had the problem that the volume buttons were not working properly. You just cant see anything above 100% unless you go into the control panel. Now when it comes to audio I'm the village idiot, but I found a proper solution I think. After some experimentation I found that the module "module-cli-protocol-unix" ( #20 in my case) can be amplified with pactl set-sink-input-volume 20 10db Now YMMV depending on your attached hardware, so change the 10db to whatever suits your situation. After that I made it permanent by adding it to the /etc/pulse/default…

Hello, after some u-boot test, my helios64 don't start the bootloader stage. I can etablish a serial connection on USB Type-c port, but when I tried to start the system, I have no output on it. After I disconnected everything : - I connect usb-c cable, I'm able to connect to serial console with picocom - I connect the power cable, The LED1 (System Rail Power) is on, and the LED9 (Battery Status) flashes. - I press the power botton (without sdcard) : - LED2 and LED3 (Periph. Rail Power and HDD Rail Power) are on - LED4 and LED5 (System ON and HDD Activity) are on. - nothing happen on serial console - If I keep SWI (power …

Hi , I downloaded "Armbian_20.08_Orangepi4_bionic_legacy_4.4.213_desktop" from Chinese mirror ... flashed into a 16 GB sd card using Etcher ...and now on first start/boot getting these messages (messages pictures attached )...what may be the problem ? * SBC > Opi4 (with 16 GB on board EMMC) . * Power supply > Original Orange Pi supplied 5v/3 amps . * Os version > Armbian_20.08_Orangepi4_bionic_legacy_4.4.213_desktop. * SD card > 16 GB . EDIT/UPDATE : I just carried on punching the requested information which Armbian usually ask at fresh install/boot..with my every key pressed console kept on emitting errors BUT ultimately it f…

Hi all, I am unable to login to OMV on my Helios64. A bit of sleuthing indicates that this is because the / fs is at 100% capacity. At first, I figured I'll just transfer the system install from the 8GB SD Card I started with to the 16GB internal eMMC. Turns out past unfnknblvbl already did that, and now I need to go the other way. The documentation on the old Kobol site isn't entirely accurate about how to do this. My SDCard is /dev/mmcblk1 and even though it's formatted ext4, it simply doesn't show in armbian-config. In fact, the only device that shows in the Install menu is /dev/md127, which is the RAID array itself. I'd rather not be booting f…

I'm trying to switch the upper USB port to peripheral mode so I can use the ethernet gadget on it. Has anyone done anything like that before? I've got an issue here https://github.com/ayufan-rock64/linux-build/issues/117 with some of the things I've tried already.

Having some issues here. I wrote the newest Ubuntu CLI to my SD card. I booted into the device and used Armbian-Install to move the root to the NVME. I fixed the UUID on the fstab file. I was able to boot up from the SD + NVME. I did an apt update + upgrade, that seemed to go well. I rebooted the device and it won't boot. I get this on the screen: 1.436035] Initranfs unpacking failed: broken padding 2.1982061 Kernel panic- not syncing: No working init found. Try passing init option to kernel. See Linux Documentation/admin-guide/init.rst for guidance. 2.2177021 CPU: 4 PID: 1 Comm: swapper/0 Not tainted 5.15.93-rockchip6…

I have a Helios64 that I recently reinstalled/updated to the latest Armbain Jammy image after not updating for quite some time and finding some of the repos to be dead. Without the drives initialized the system seems like it will run for days, but with the drives initialized (ZFS), I will get the below error after a few hours of uptime (~8-10 hours). I have seen some threads saying to set the CPU clock to one speed to fix the issue and some people installing a newer kernel (via beta.armbian.com). If anyone has any thoughts on how I could try and make this more stable I would appreciate it. [477435.475903] rcu: INFO: rcu_preempt self-detected stall on CPU [477…

I noticed today that there are no 23.02 images for the rockpi-4c. The images exist for the 4a, 4b and 4cplus variants but not the 4c. The 22.11 images are the latest for the 4c. The reason I noticed is that on the downloads page for the rockpi4 it is still showing 22.11 as the current images because that page is showing the 4c info, with links provided to the other variants. The fact that it still showed 22.11 caught my eye.

Hi, how can I check the serial number of the RK3328 chip? with the distro from orangepi I can use cat /sys/devices/platform/board/info and with ArmBian ? thanks

Just an information about the `edge` kernel (6.18) when used on the cm3588-nas system. The rtc driver is not initialized on a `poweron`. After a poweron, you will see the following in the log. Nov 11 01:17:10 uhutest kernel: rtc-hym8563 6-0051: could not init device, -6 Nov 11 01:17:10 uhutest systemd[1]: System time advanced to built-in epoch: Tue 2025-11-11 01:17:09 CET If you have `fake-hwclock` running, you will see the following a moment later. fake-hwclock restores the time, but the service will not properly start, because of the rtc device error. Nov 11 01:17:12 uhutest fake-hwclock.sh[461]: Restoring saved system time Nov 20…

Dear H64-Friends, I've got the Armbian Debian installed with Linux Kernel 5.10 and Open Media Vault (OMV). I just use the basic functions for backing up files, nothing extraordinary. I am wondering what's the best strategy to update the Helios64 system concerning stability and getting no errors for backing up files (automatic USB-Backups). Keep it always up to date if there's an update available in OMV? Or just wait some weeks?

Hi, I want to know if there is another way to power the Nanopc-t4 besides the 12V input power jack. As far as I know the 12V power input is the only way but If someone have another idea or way to do power the board, it could be very helpful for me. Thanks.

Hi, An old problem, since I got the board which is 4C. Not a + - or whatever but the plain C. Symptoms: 1. HDMI worked randomly, maybe every 10th...15th boot lead to a working system, or rather to a visible HDMI-connection. But now switching on-off does not help at all. 2. Quite often one can get the board booting to the point where it asks for the password, and after clicking ok, it switches the screen off, and won't return. So the telly says that "no signal". 3. When switching on the board the tv set sees that there's someone on the hdmi port, and shows the booting sequence, and finally goes to Armbian's graphical mode asking for t…

Hello, i want use and control kodi on my Helios64 with the tv remote. Have someone experiance with that and a recommendation for cables or usb c dockingstation? thank you

Hi I am trying to get my neo4 to boot vmlinuz-5.3.0-rc4-rk3399 I am getting lots of; mmc1: card never left busy state mmc1: error -110 whilst initializing SD card Boots fine with legacy kernel, is there something I can do?

Hi just a quick question What package is dt-bindings normally located in, i would assume kernel headers but i tried installation via armbian-config and couldn't see them. Can anyone confirm what package it normally is in or was i blind thanks. Was just working on adding support Waveshare Dual RS232 on SPI2, uploaded DTS to https://github.com/radxa/overlays/blob/main/arch/arm64/boot/dts/rockchip/overlays/rk3399-spi2-sc16is752.dts Atm i hardcoded the defines on machine but not ideal if it changes in the future Thanks

Howdy, Just wanted folks to know that debian bullseye is generally getting what I need done. Specially Welcome to Armbian 22.11.1 Bullseye with Linux 5.10.72-rockchip-rk3588 is working. It is working headless just fine. Now what is not working for me. The HDMI is not showing up at all. Between my KVM and ultra wide monitor it may not be an OS issue. SD-card boot is the way I am going. Manual partitioning of the NVME was needed to install. It felt like I needed to reboot a few times to get the NVME to boot. Overall it was a better experience than the experience on the Firefly station P2 competing with Station OS. Thanks…

That newsletter indicated that USB-C to HDMI cables promised were still delayed. Is there an update on that? Thanks!

flashing Armbian 23.5 Bookworm to tinkerboard 2. everything is working well except the USB otg.

Hi, community. I have set up this device from which I'm writing this, installed Armbian from SD card, by sweeping out original FriendlyElec images from the FriendlyElec's partition, so I wiped off the Android and Ubuntu, and copied on it the Armbian image, which appeared with the title "RAW". Booted and installed fine. It works. From armbian-config I managed to boot from an USB Toshiba 1Tb disk. To this part, I have a little but efficient linuxPC, ¡¡¡THANK YOU!!!. I'm trying to compile binaries of STM32, or Arduino devices, comment this to tell details only. Every 5 to 8 bootups, it didn't recognize the USB drive, and dumps a series of Hex data, divided in bunches. S…

Hello I would like to know if it is possible to have 2 partions on the emmc. Indeed My emmc have 256go for only the os armbian with OMV (2.5go only used). I would like to have for example a boot partition with size of 50go and an other partition for my data (200go). However when I use armbian-config the full emmc is formated. If a solution exist could you please share with me the solution. Thanks in advance for your support.

Hi everyone, i am using NanoPi R6C which is + integrated with a Rockchip RK3588S + running Armbian_23.2.7_Nanopi-r6s_jammy_legacy_5.10.110 image I need to use 3 UARTs (UART1, UART4, UART5) on this board but don't know how to do, can anyone give me some guides please, i have tried armbian-config but in "Hardware" there is no NanoPi R6C option

Hi, I would like to enable 4K output for my new monitor connected to a NanoPi M4V2 running Armbian based on Ubuntu Bionic legacy. I have searched for some days now, but could not find a solution. I would be very glad, if someone could just point me to the right direction on how to configure the Armbian desktop environment for 4K.

My Sata SSD drive works very slowly on Orange PI 4, using usb 3.0 port. On PC based on Windows 11 via usb 3.0 it works correctly. I found problem on Armbian 23.02(trunk, 30.12.2022, edited parameters: installed software, bluetooth parameters) when I try move system onto SSD, first time it works normaly, but not so fast, as expected and automatically starts in read only mode. Read only mode I have fixed. Sometimes it breakes ext4 partition, that I've fixed using fsck, and fix again when ext4 breakes again and not working/works badly. After some time it begun freezing. I tried to find solution by myself, but not found good advices. I've tried some mounting parameters, …

After the next (last) update, the system does not boot, there is no ssh access, and the monitor does not turn on. I just didn't install updates for three weeks and decided to update yesterday What should I do, re-install the system ? The loader is located on the sd card, and the system is on the hdd, using the 4.4.x kernel

My Rock Pi S logs a NULL pointer dereference in the ext4 module after running for 1 to 3 hours. Subsequently existing processes continue to run but it appears that new processes can't start (eg I can't ssh in). The filesystem is on a new Sandisk Ultra Plus microSD card. As a test, I remounted the root filesystem read/write and the board ran flawlessly for 10 hours. When I get time I will try rebuilding the image with the root filesystem on F2FS. Aug 31 09:31:27 rockpi-s kernel: [ 1944.993824] Unable to handle kernel NULL pointer dereference at virtual address 00000000000000f8 Aug 31 09:31:27 rockpi-s kernel: [ 1944.994681] Mem abort info: Aug 31 …

Hello, I installed Armbian 22.05.3 Jammy on a Rock Pi 4A+. Unfortunately 3 out of 4 USB ports do not work; only the USB 3.0 OTG port works. I tried using the Debian Buster download from Radxa, and all four ports work. Any suggestion on how to fix this with Armbian?

Seems like a great little box, but Radxa doesn't have much info about the hardware side of it. Simple stuff like accessing the LEDs and buttons when running Armbian. Posted on the Radxa website but no replies, so just curious if anyone has dug into it at all?

Hello everybody! I write on this topic because i'm searching for few weeks a solution with dd command to make a disk image backup, but I don't find a conclusive solution, so... Firstly I send dd command. Disque /dev/mmcblk0 : 29,7 GiB, 31914983424 octets, 62333952 secteurs Unités : secteur de 1 × 512 = 512 octets Taille de secteur (logique / physique) : 512 octets / 512 octets taille d'E/S (minimale / optimale) : 512 octets / 512 octets Type d'étiquette de disque : dos Identifiant de disque : 0x53d4dbd7 Périphérique Amorçage Début Fin Secteurs Taille Id Type /dev/mmcblk0p1 32768 10504191 10471424 5G 83 Linux Disque /dev/s…

I'm having a very weird issue. I've encrypted a 5TB USB drive on my computer with LUKS sudo cryptsetup luksFormat /dev/sda1 And it works great on my computer. But when I plug in into my Helios64 and try to use it: sudo cryptsetup luksOpen /dev/sda1 secret Enter passphrase for /dev/sda1: No key available with this passphrase. It just refuses. And if I try to encrypt the drive from the Helios64 using cryptsetup it never finishes, the command runs forever. Anyone had similar issues? Any ideas?

Hello, with the last kernel update I have untimely reboot of my nas. some info : hardware : helios64 os : armbian bullseye based with openmediavault 6 on top kernel : armbian-bsp-cli-helios64-current:arm64 23.8.1 before the update to armbian-bsp-cli 23.8.1 the system have some unexpected restarts, but less than 1 by day. With last version, the system restarts itself sometime only few minutes after the start. With a debug console, I got the following kernel panic : [ 510.791607] Internal error: Oops: 0000000096000044 [#1] PREEMPT SMP [ 510.792174] Modules linked in: xt_nat xt_tcpudp veth xt_conntrack nft_chain_nat xt_MASQUE…

Hello Armbian Community, I am currently running the following image on my Orange Pi 5 Max: Armbian_community_26.2.0-trunk.668_Orangepi5-max_noble_edge_7.0.0-rc6_kde-neon_desktop Unfortunately, I'm struggling with WiFi and Bluetooth issues: WiFi: No wireless interfaces are detected (no option in network settings). Bluetooth: The service is active, but it cannot scan or find any devices. What I’ve tried so far: Installed armbian-firmware and full-mirror-armbian-firmware. Verified that common wireless tools and relative packages are up to date. Checked rfkill list, but the adapters don't seem to be initialized correctly. …

Hello, How can I get a effective shutdown with the battery with legacy 4.4 (it always restarts) (2.5 Gbps OK) or How can the 2,5 Gbps performance issue be solved in 5.8 ? (that can shutdown OK) Which one is the easiest to address and solve for a beginner like me using OMV? Thank You! David

Would like to be running fail2ban but missing an important kernel module -> xt_multiport Any ideas on obtaining this? modprobe: FATAL: Module xt_multiport not found in directory /lib/modules/6.12.22-current-rockchip64

How to use GPIOS like the FriendlyELEC's official system? Wiringpi does not work on Armbian, can you adapt the Armbain system of Nanopc T4 to Wiringpi?

Hi Does anyone have a working U-boot or CLI image with serial console disabled for Rock Pi 4b or Rock 4SE? Been struggling for a week to build my own with ./compile.sh and user patch but no success, U-boot hangs at user input prompt because gps sends data from power on. Have tried all suggestions on the forum.

Can I run a YOLOv8 model in RKNN format, developed for Rockchip 3588, on a Rockchip 3588S without any issues?

I have a problem on 2 rock-5b boards with emmc drives. on both I am unable to update the distro immediately after the first boot. On the firs SBC upon doing an apt upgrade I get: Setting up perl-base (5.36.0-7+deb12u1) ... (Reading database ... 27044 files and directories currently installed.) Preparing to unpack .../0-perl-modules-5.36_5.36.0-7+deb12u1_all.deb ... Unpacking perl-modules-5.36 (5.36.0-7+deb12u1) over (5.36.0-7) ... dpkg: unrecoverable fatal error, aborting: unable to fsync updated status of 'perl-modules-5.36': Input/output error E: Sub-process /usr/bin/dpkg returned an error code (2) W: Problem unlinking the file /var/cache/apt/pkgcac…

Looks like my Rock Pi 4C+ does not recognize builtin sound card: root@rockpi-4cplus:~# aplay -l **** List of PLAYBACK Hardware Devices **** root@rockpi-4cplus:~# armbianmonitor link: https://paste.armbian.com/xucibilaza It seems to me that there are some clues here: What is the issue? How can I fix it?

Hiya, Are the mirrors out of sync? or did I break something E: Failed to fetch http://deb.debian.org/debian/dists/bookworm-backports/non-free-firmware/binary-arm64/by-hash/SHA256/bc6dc27f7f88e60504fae9d9271e4dabaaa76b8a3a35ac6ec579e24d01d0ea16 E: Failed to fetch http://fi.mirror.armbian.de/beta/dists/bookworm/main/by-hash/SHA512/31775333c7d89a377fd3d2aac261ef684faeaba308fcf85b3c9ddc7f4f4a61712f5e398bc3b23464fd77d3eabd2b86e92b5dcc8dc2e44a27926f546708418c1a Hash Sum mismatch Hashes of expected file: - Filesize:5041046 [weak] - SHA512:31775333c7d89a377fd3d2aac261ef684faeaba308fcf85b3c9ddc7f4f4a61712f5e398bc3b23464fd77d3eabd2b86e92b5dcc8dc…

Hi, I bought a 2-pin piezo buzzer to use for alarm messages. It is connected to the P4 header on the board. When I execute the "beep" command in the console I only get short click noises. Are special kernel drivers necessary for a correct function?

I was wondering if anybody had an STL or the like for the drive sleds. I haven't broken one yet, but was thinking about making some in different colors on my 3D printer if they're available. Thanks.

I am trying to setup Raxda Display 8 HD with Radxa ROCK 3A. On official Radxa OS, I used Rsetup tool to setup overlay for `Radxa Display 8 HD' using official guide. How can I do same on Dedicated applications images with Armbian Linux v6.12 ( Home Assistant ) ? I have read Device Tree overlays guide on armbian docs but I can't find overlay for lcd display in files:

I am using native camera ( NDKCameraManager2 ) in c++. I wanted to know whether rk3399 supports camera2 HAL3 with LEVEL_3 or not? 我在c ++中使用本机摄像头（NDKCameraManager2）。 我想知道rk3399是否支持LEVEL_3的camera2 HAL3？

Hey, I am working with Weston-7 alongside Lima driver with MESA v19 to render using MALI450 on the display but it isn't rendering it properly. I thought the issue is with MESA so I upgraded it to v20 and applied required patches for Weston-7, but still the result is same and there is no improvement. I have attached the video link below of Weston terminal on the display for reference. Weston render Any idea what I might be missing here?

This is a work-in-progress resource for bare-metal bringup for Rockchip devices. Source code: https://github.com/petabyt/rk https://danielc.dev/rk/

Orange Pi 5 Pro 16GB Armbian Ubuntu 24.04 XFCE on NVMe (SD card to boot to NVMe) USB 3.0 is not working anymore after install. Was working on OPi OS Ubuntu 22.04 before as I used it to copy Armbian image to NVMe. Logs shows nothing when connecting / removing cable, boot log has no mention about USB 3.0 and no power delivered. Is there some known setting, e.g. USB in OTG mode or something that can do this?

I just cannot access spi on my Rock64. I read a couple posts of it but none works out for me I'm running Armbian 22.05.3 Focal with Linux 5.15.52-rockchip64 on it. Tried enabling spi-jedec-nor and spi-spidev overlay, but with none of them I get output when executing ls /dev/spi*. Is it maybe a hardware issue, reading this post suggests that to me: https://forum.pine64.org/showthread.php?tid=5473&pid=34616#pid34616 But I cannot make much sense out of it. Can anyone help me get spi working?

Hi all, any recommendations for a ~ 5" monitor for the M4 ?

Hi, I have a USB device that periodically hangs. Reboot or re-plug helps, but I need something lighter. I've seen several discussions on the problem of resurrecting hanging USB devices, but their solutions seems devices specific. Non on them worked in my case. I tried ioctl with USBDEVFS_RESET among other methods. uhubctl didn't work too (it seems it only sees EHCI hub, while my device is USB3.0 and connected to XHCI). Ideally the solution should depower a single USB connector to let the device fully reset and then get it connected back.

cancelled - power unit cable was not correctly plugged in and NAS was running on battery, hence the automated shutdowns, i think (but it's not clearly printed / displayed anywhere, i would say that it could have helped).

I have a problem with touch screen, i must each time after power on calibrate touch screen. Looks like dont save parameters. Any help?

Hi, I have tried booting multiple different images from Armbian, But when I bootup I get the message below. I have tried 8 different charger, 5V 3A, PD 3.0, 35W charger, 10W charger... I'm using a Sandisk Extreme SD card, I have flashed the board using both the SPI found from radxa wiki, and the rkspi_loader.img found from github. If there is any other information, please let me know. Should be noted that I took a picture and used image-to-text to get the output below. 15.1599071 usb usb?: Manufacturer: Linux 5.10.110-media xhci-hcd 15.1616491 usb usb?: SerialNumber: xhci-hcd.9.auto 15.1636651 hub 7-0:1.0: U…

I'm getting this weird graphical artifact on a Radxa Rock 4SE connected to a TV via HDMI. It covers roughly a third of the right side of the display, note that the terminal window is covered by the artifact but the cursor is above it. I started from a Debian minimal image and added the desktop environment via armbian-config. The artifact is visible on both GNOME and KDE Plasma (with fully updated system on both rolling and stable) but not with XFCE. It also disappears with resolutions lower than 4K or switching to tty. Any idea what might be causing this?

Hello, I need to develop a new camera driver. I've already done a big part, but now I've faced with issue: [ 92.374493] rkisp rkisp-vir0: link validation failed for 'rockchip-csi2-dphy0':1 -> 'rkisp-csi-subdev':0, error -32 I know, that basically right, as dhy0 has sink pad, and my subdev has only source pad. But I don't know how to change the sides, or avoid it to link in such order. I've already spent a lot of time on this and still no luck. Do you have any ideas on how to avoid it linking in such order?

I just saw the post how to get kodi working with a legacy kernel. I want to get ffmpeg working in a docker (specifically for frigate). Do i also need to install the legacy kernel on my machine and do the same steps and only then get the ffmpeg installed in the docker or can anyone help me how to start with this.

Had my Helios up and running for a few months now running off SD card, but there was a message (can't remember where) to not make the install you 'final' setup as things were still in development. I've been keeping track of the 'what works and doesn't' , but as there are no updates in 6 weeks, is the general consensus that we've reached stability and its time to transfer to the eMMC?

I'm trying to get the image for the Radxa 5A model and the website https://mirror-us-phx1.armbian.airframes.io/dl/rock-5a/archive/ seems to be down since this morning. Any idea?

Hi, I need to use callback function in Python3 on my NanoPi M4 but I can't, so it is very nice if anyone can help me with this issue. So far I've tried the function with wiringpi as shown command bellow but this doesn't work at all, that generates some errors and after that my command in /usr/bin/ doesn't work .... I can use other functions in wirignpi so guess something is wrong with only this function... Is there any way to use callback function with NanoPi M4, for example using other modules or something Thank you,

When I boot any variant with kernel 6..x.x from SD there is no problem with hdmi. When I flash the same variant to the nvme, it boots fine but there is no hdmi output. The orange pi logo appears for a second, then nothing. I can ssh in and everthing works fine. Any variant with 5.x.x kernel works fine from the nvme, with hdmi output. What I don't understand is that if I have output to hdmi when booting from sd, why not from nvme. What I think is relevent entries in the boot log is below. mmu fe043e00.iommu: Enable stall request timed out, status: 0x00030b Jan 30 09:38:22 orangepi3b kernel: rk_iommu fe043e00.iommu: Enable stall reques…

I tried to update my odroidm1 to 23.11.2 (from 23.8.1) by fresh install using Armbian_23.11.2_Odroidm1_bookworm_current_6.1.68 flashed to sdcard but when booting the device (holding recovery button) I see "Gave up waiting for root file system device." The same issue when using the other CLI images flashed to sdcard. Any idea how to fix this? When mounting the sdcard from a ubuntu system the uuid seem to match and the sdcard is mountable.

Building Jammy works fine, but if I select Kineic for example using this ./compile.sh BOARD=rock-5b BRANCH=legacy RELEASE=kinetic COMPRESS_OUTPUTIMAGE=img KERNEL_CONFIGURE=no BUILD_MINIMAL=no BUILD_DESKTOP=no it fails in this way [🌱] Installing base system with 5 packages [ Stage 1/2 ] [🔨] E: No such script: /usr/share/debootstrap/scripts/kinetic [💥] error! [ Debootstrap first stage failed kinetic no ] Now I re-fetched a new Armbian git but the problem remains. Why?

Just like other times i burned sdcard and inserted latest version of Armbian_24_11, changed armbianEnv.txt to 5b and installed to emmc using armbian-installer. At the end i updated bootloader and emmc disappeared. I tried most of images and last image that is not bricking is Armbian_24.5.3_Orangepi5_bookworm_vendor_6.1.43_minimal.img.xz (link). Unbrick: 1) Reinstall Orangepi OS using document in the link on emmc. After installation is compete emmc will be back. 2) Reinstall Armbian lower than 24_11. The one that i found in archive that worked is 24.5.3.

Hi, is it possible to switch off the GPU of the Station M1 to reduce power in headless server application ? Chris

Armbian_5.69_Nanopineo4_Ubuntu_bionic_default_4.4.167_desktop.7z Image seems all ok except for WIFI which is not working.

Trying to use a nrf905 wireless transciver at the nanopc t4. For compiling the firmware against the kernel I need a kernel with exported symbols. Tryed to build an own kernel, but it don't works sudo modprobe nrf905 modprobe: ERROR: could not insert 'nrf905': Exec format error

Hello together, I have a RockPI 4B board with the extension for M.2 SSD applications. I wanted to install a 120 GB SSD disk, but unfortunately I cannot find it under "fdisk -l". Can anyone help me here with what I can do? Are there any tricks or the like to make this work? Kind regards Z. Matthias

I have had major problems trying to use spidev on the pine RockPro64 SBC running Armbian_24.2.1_Rockpro64_jammy_current_6.6.16_xfce. I have posted these comments on the pine.org forum also. I think there is a problem with the spidev device in Armbian as it never toggles the CS line. When I controlled the CS line from my software, I could communicate, but the received data was wrong. I have no experience with the device tree, but I suspect an isue therein. To bypass the problem I wrote a bitbang routine and it works fine and gives the correct data. See the attached file for my discussion. usingspi.txt

I've been looking into streaming on the Orange Pi's, which doesn't work, so I thought I would share my findings. I was first told by customer service people that the problem was HDCP, but have found that it is actually the camera. The tech was kind enough to slip that the camera module doesn't have their hooks. I can still view in the browser, and this leaves me to the conclusion that TV boxes and Smart TVs are using the camera modules to record end users without their permission. If the system has the camera hooks, the app is allowed to play. The browser bypasses this, because it has permissions to access private information on our device…

Hello everybody, With 6.18.10-current-rockchip64 and rk3399-kobol-helios64.dtb-6.18.18-opp dtb file, Ok With 6.18.35-current-rockchip64 and overlay helios64 patch with armbian-config, Ko With 6.18.35-current-rockchip64 and k3399-kobol-helios64.dtb-6.18.18-opp dtb file, Ko The crash is random... sometime crash: - At the boot with red system light blinking - At the opening of my LUKS ciffers drives - At a high cpu load - With nothing special, all led are blue, system blinking but network and ssh is Ko Is it possible to explain me how to see the problem or how to have log because I am in blind to have more de…

Hello, I have installed a tinkerboard 2S and used it without problems for more than a year now. Today I started Armbian-upgrade to upgrade the system.I use a M2 WIFI card. What happens right after the reboot when the upgrade was done; the system boots normally, showing all information on the monitor, and about 5 seconds after the login prompt is displayed, it completely freezes. That is; the system doesn't react to keypresses on my USB keyboard, and SSH access isn't reacting. I can ping the device however and I know it is not dead as my .NET core application is running normally and I can access it externally! I use a wifi hotspot configuration; the wifi n…

Hello, I was wondering if the recent update fixed the problem with the lack of gpu support in the OP5 Pro. Thanks in advance.

Hello, The last image for orange pi 5 with kernel 6.7 doesn't contain the overlay rk3588s-orangepi-5b.dtb on /boot/dtb/rockchip. So there is no way to mount the emmc on the orange pi 5B Is it possible to download the binary overlay separatelly? Thank you.

I am experiencing an issue where the Intel BE200 Wi-Fi module stops working on the NanoPi R5C after upgrading to the latest Armbian v26.2.1 with newer kernels. The iwlwifi driver fails to initialize the device due to a missing configuration profile. Environment: Board: NanoPi R5C OS Version: Armbian v26.2.1 Wi-Fi Module: Intel BE200 Failing Kernels: v6.19.0-edge-rockchip64, v6.18.10-current-rockchip64 Working Kernel: 6.12.58-current-rockchip64 Actual Behavior & Logs: When booting with v6.18.10-current-rockchip64 or v6.19.0-edge-rockchip64, the Wi-Fi interface does not show up. Checking dmesg reveals the following iwlwifi probe fai…

As you can see the WAN-port/NIC registers fine with a label from the nanopi-r6c device tree $ grep fe1c0000 /boot/dtb/rockchip/rk3588s-nanopi-r6c.dtb grep: /boot/dtb/rockchip/rk3588s-nanopi-r6c.dtb: binary file matches dmesg: dmesg | grep fe1c0000 [ 7.287277] rk_gmac-dwmac fe1c0000.ethernet: init for RGMII_RXID [ 7.287373] rk_gmac-dwmac fe1c0000.ethernet: User ID: 0x30, Synopsys ID: 0x51 [ 7.287377] rk_gmac-dwmac fe1c0000.ethernet: DWMAC4/5 [ 7.287381] rk_gmac-dwmac fe1c0000.ethernet: DMA HW capability register supported [ 7.287385] rk_gmac-dwmac fe1c0000.ethernet: RX Checksum Offload Engine supported [ 7.287388] rk_gmac-dwmac fe1…

Hello all, since I didn't find a hint in an other blog I opened this topic. I tried to install gdm3 on a Armbian_23.5.4_Rock-5a_jammy_legacy_5.10.160_gnome or xcfe installtion in order to enable Wayland. I always got the masseage: Does anybody have an idea? Thanks, Best regards, Kersten

Hello everyone I wanted to build Armbian on the AIO-3588Q board. But I did not see that there was a configuration of this board. There was a configuration of the ITX-3588j board and other manufacturers on the same rk3588 platform and tried to build Armbian. In the assembled images in GPT format, only rootfs was stored (it combines rootfs and kernel (boot.img) according to the rockchip documentation). After I built it, I installed it in the rootds partition, it was installed without any errors. But the system does not start. You turn on the power, the fan starts spinning very fast, spins for 5 seconds, the lower LED lights up, and then the fan stops, the light go…

Because I reported an error when compiling Oranpi4b, I want to change the toolchain version, but I don’t know how to change it, so I come here to ask everyone, please help me solve it

Hello, As stated recently I had setup a Rock5B with Jammy/Mutimedia and had issues with a 2160P / 3840 x 2160 screen. Initially bootup would show a flickering screen. Adding the custom resolutions via cvt/xrandr and setting line in boot env: "exrtaargs-video=HDMI-A-1:3840x2160@60" fixed that issue However the initial login screen and logout screen resulted in a vibrant flickering background . This was on a Sceptre 50" TV and other perihperials would normally work fine. This took a while to figure out because I was confusing my active desktop provider and Gdm was being used: https://askubuntu.com/questions/91…

hi, im trying to make my radxa 4d in to a open media vault server, iv down loaded the file from armbian's web side but it wont boot, pluging it in to one of my raspberry pi's and useing gparted, i can only see one partision for it and can view it, dose this need a boot loader? iv also tryed downloading Debian 14 (Forky) from the armbian web site and got that to boot, but the script from armbian-config is broken ( missing stuff like php) and iv tryed the script from open media vault but that errors with eth0 missing. do i need to install a boot loader on the armbian open media vault image ?

I had a need to change the macaddress of this device, after looking through the bootloader I spotted 2 offsets: 0x380400 macaddress NIC1 0x380406 macaddress NIC2 I would love an option in the installer, but I did it manually now: # dd if=/dev/mmcblk2 bs=16M count=1 of=bootloader 1+0 records in 1+0 records out 16777216 bytes (17 MB, 16 MiB) copied, 0,0736928 s, 228 MB/s # read_mac bootloader 0x380400 9c:d5:dc:b2:ce:1c # write_mac bootloader 0x380400 $(random_mac) write_mac bootloader 0x380400 $(random_mac) # read_mac bootloader 0x380400 b0:3f:1a:83:9a:da After scripting a couple of functions of course: ### Functi…