Rockchip

Hi, Is it possible to boot from SSD? How it should be partitioned? Can I use any arbitrary partition for rootfs? Should I follow the procedure from this thread ? It assumes I should write the armbian image to a whole drive instead of partition, right? Well, I actually tried some way... First, I've tried to just run some utility from ambian-config that transfers rootfs to a partition. Device did not boot after this (with SD card ejected). Then I've flashed the ayufan's u-boot-flash-spi-rock64.img.xz. This also fails (boot log is attached) but the log looks promising. BTW, I'm experimenting with Ubuntu 18.04 image built by myself …

I am so frustrated with my rock64 (SoC RK3328), there is no support. Pine 64 takes the money and dumps all the issues on a community. The product is a lemon. Can’t watch YouTube, there is no audio I am very disappointed in Pine64, I will try and return this device.

Hi Guys ! I bought a new WD Blue 3D NAND SSD (1TB). It is not detected by the USB 3.0 port but by the USB 2.0 port (tested with lsblk). What can I do to be recognized on the fast 3.0 port? I am using Armbian_5.73.190128_Rockpi-4b_Debian_stretch_dev_4.20.0 Best thanks in advance ... !

Greetings, I can't seem to find any documentation on how to access the only PWM port on the Nano M4 which happens to reside on the 2nd set of pins. It's listed as GPIO2 and the PWM pin is pin 23 which they label as GPIO_C6/PWM1(3V). SInce any documentation I find on GPIO has to do with the 40 pin port, how can I program the PWM using wiringPI-Python? I wonder why Nano chose to disregard the other PWM pins that other Raspberry Pi type boards retained like the Asus Tinkerboard. Or am I missing something? If so, can someone enlighten me as to how to access PWM on the Nano M4. Preferably using Python 3.

I made a custom Plex Media Player build that leverages the decent performance we get with the fbdev/dri driver. I tested Rockchip MPP gstreamer plugin. The Rockchip Hardware VPU is very basic, it breaks with mkv playback, so I decided to use ffmpeg software decoding since it's extremely robust. Also 1080p playback through DRI isn't too shabby!. If you want 4k video then you need to contact Rockchip. They seem to be overwhelmed or not interested in bringing 4k support to Linux. I built a .deb package that will install plexmediaplayer to /usr/local. No worries about installing to somewhere and clobbering an official library or package. Official Armbian depen…

Greetings, I can't seem to find any documentation on how to access the only PWM port on the Nano M4 which happens to reside on the 2nd set of pins. It's listed as GPIO2 and the PWM pin is pin 23 which they label as GPIO_C6/PWM1(3V). SInce any documentation I find on GPIO has to do with the 40 pin port, how can I program the PWM using wiringPI-Python? I wonder why Nano chose to disregard the other PWM pins that other Raspberry Pi type boards retained like the Asus Tinkerboard. Or am I missing something? If so, can someone enlighten me as to how to access PWM on the Nano M4.

Hello I built a new kernel for my rock64, how do I install it so I can boot on it I am trying to go from 4.4.174 to 4.14.106

hello everyone, i just received a new nano pi m4 4G with it's 13M camera module, the problem is that when i try to list the connected camera ls -lrth /dev/video* it shows only the usb cameras, does anyone knows how to get it working on armbian "Linux nanopim4 4.4.172-rk3399 #22 SMP Tue Jan 29 07:00:38 CET 2019 aarch64 aarch64 aarch64 GNU/Linux" thanks in advance

Hello, I search the Documentation about LED and Its blinking status. My Board does not anymore boot, Green LED is on (not blinking) red LED is blinking regulary CPU gets very hot and no Screen output. I use the latest armbian image using the following link https://dl.armbian.com/rockpi-4b/Ubuntu_bionic_default_desktop.7z Does anyone have a hint for me Many Thanks Roman

This report applies to NanoPi-4 RK3399 boards (NanoPC T4, NanoPi M4, NanoPi NEO4) running Armbian Bionic (Friendlyarm-based legacy 4.4.y kernel). In other words, boards targeted by Armbian rk3399.conf and Friendlyarm kernel but *NOT* baords using rockchip64.conf and Ayufan kernel. There is a bug in the friendlyarm linux 4.4 version of /scripts/package/builddeb that causes the linux-headers package to be incomplete. Attempts to build out-of-tree kernel modules to fail with errors of the form "fatal error: ../../arm/include/asm/opcodes.h: No such file or directory". For example here is the output trying to build a simple kernel module from this tutorial: …

hi rk3399 is being very popular chip. Firefly 3399 was launched on August last year. Now Orange pi RK 3399 is launching. Pine now are preparing Pine RK3399. the same also is doing HanrdKernel - Odroid N is expected on august this year. Short Question. Are you preparing Armbian for RK3399? Are you interested in this chip. best regards

Hello, When I would like to start my PPP connection my Kernel says missing Module: I use the RockPi 4b with the Image https://dl.armbian.com/rockpi-4b/Ubuntu_bionic_dev_nightly.7z root@rockpi00001:/opt/LTE# pppd call gprs & root@rockpi00001:/opt/LTE# Couldn't open the /dev/ppp device: No such file or directory modprobe: FATAL: Module ppp_generic not found in directory /lib/modules/4.20.13-rockchip64 pppd: You need to create the /dev/ppp device node by executing the following command as root: mknod /dev/ppp c 108 I have created the mknod /dev/ppp c 10…

Hi, I am strugling with the OV13850 camera on the NanoPC T4. Its working with the command : GStreamer 1.1 command: gst-launch-1.0 rkisp io-mode=4 path-iqf=/etc/cam_iq/rk-ov13850.xml ! video/x-raw,format=NV12,width=1280,height=720,framerate=30/1 ! rkximagesink But I can not connect to it through OepnCv VideoCapture cap(0) . or 1 2 3 . It give s error : VIDIOC_QUERYCTRL: Inappropriate ioctl for device Is there anybody experienced on this ? thx

Trying to get sound working on my t4. Looks like pulseaudio detects the realtek rt5651-codec but I can't get any sound out of it. The software mixer seems to be showing audio, I just can't hear anything nanopct4 4.4.161-rk3399 SMP aplay-l shoulws realtekrt5651co as device0. Any help debugging this would be great. Regards, Cam

Hi, I'm currently woking on transmitting image data by UART connection with the NanoPi M4, but I couldn't send data from '/dev/ttyS4', which is offered as for UART connection. I used pyserial in python to use UART but no change has been detected the pin #19 by the oscilloscope. Do I have to enable the UART somehow? If I can use UART with NanoPi M4, I would say this machine is so fantastic.

Hi, I have deployed a NanoPi Neo 4 and for the most part, I'm happy with it, but am having a peculiar problem. I am using the manufacturer-supplied serial console cable and USB adapter (via screen /dev/ttyUSBx 115200). Once the machine is properly booted, if I hit enter, I get a serial console as normal. However, I get garbage from u-boot (and presumably from the kernel boot messages). It looks just as if I have a speed mismatch. I have tried many other speeds (1500000, 230400, 57600, 38400, 19200, 9600) and none of these seem to work. What am I doing wrong? Or is the state of the box right now that u-boot sends garbage …

Hello, I was wondering if it is possible to disable both LEDs on this board or, at least, the green (stat) one. Also I was trying to remove wifi completely and I can do: iwconfig wlan0 txpower off ifconfig wlan0 down systemctl disable wpa_supplicant But not sure if it's possible to remove the driver from the OS and what other unnecessary software I can remove. Thank you in advance.

As I reported here (https://github.com/armbian/build/issues/1230), I'm seeing frequent reboots and Kernel Panics on a RK3399 board while running ElasticSearch, a kinda heavy application that runs on Java. I currently run a Kubernetes cluster on two RK3399 boards (NanoPC-T4). One of them I has a version of DietPi with a Kernel 4.4.138 compiled by myself. and runs perfectly. The other had a newer version of a Kernel (4.4.154) also compiled by me and that's where I started seeing the reboots. After this, I installed Armbian thinking it might be something with my DietPi distro. I installed 5.69 with Kernel 4.4.167 and saw the same problems. I did a ful…

Hi - First let me say how gratefull I am for an Armbian version that works with my NanoPi M4 board! I am using the board as a web server and it is rock solid. My question is about the information that is displayed when I log in to my board using SSH. There is information about cpu temp, up time, etc. How is this information extracted and displayed? I am a Linux noob and I would like to understand how to get the cpu temp and other info to use at other times. Please help me as I am just starting out with SBC's. thanks---jb.

Not the final version. Update(8/24/2018): It's time to deal with NEO4, this picture is not the final version. NEO4 will have PCIe x2 and eMMC connector too, and a MIPI-CSI. But the dual-layer USB connector will share USB 3.0 & USB 2.0, Type-C take another USB 3.0.

Hi. I have problem with Rock64 and ICYBOX IB-RD2253-U31 (USB3.1 Raid Enclosure) Kernel: Linux rock64 4.4.167-rockchip64 #3 SMP Sat Jan 12 18:58:23 CET 2019 aarch64 GNU/Linux dmesg on ICYBOX connected: [ 3.112348] usb 1-1: New USB device found, idVendor=1234, idProduct=5678 [ 3.112362] usb 1-1: New USB device strings: Mfr=2, Product=3, SerialNumber=1 [ 3.112368] usb 1-1: Product: ASM1352R-Safe [ 3.112374] usb 1-1: Manufacturer: Asmedia [ 3.112379] usb 1-1: SerialNumber: 123412341249 [ 3.113303] input: Asmedia ASM1352R-Safe as /devices/platform/ff580000.usb/usb1/1-1/1-1:1.0/input/input1 Rock64#lsusb -v …

When plugging in a RTL8153 gigabit ethernet adaptor, it shows up when using lsusb, however there is no driver found for it. I also went to the Realtek website and tried to compile the proper drivers for it, however, the Make process always fails. Do you have any suggestions as to how to get this to work? The adaptor says it is supported on the Armbian website. Thanks!

I'm trying to run the example.cpp that comes with Pine64-CPP but I am throwing segmentation faults. The man-setup() call initialzes the board with the following if statement in the setup() function in gpio.cpp if((uint64_t)gpio_mem % PAGE_SIZE) and the this->gpioMap = statement that uses SUNXI_GPIO_BASE In the example code, I initialize the pin with man->pinMode (PI_GPIO_24, OUTPUT); The pinMode function in gpio.cpp, launches _setPullupdn with gpio=78 and pud = 1. As expected Inside _setPullupdn, the following is set bank= 2 index = 0 offset = 28 The s…

Armbian_5.69_Nanopineo4_Ubuntu_bionic_default_4.4.167_desktop.7z Image seems all ok except for WIFI which is not working.

With nightly (4.20.0) I can't get my NVMe SSD mounted on the T4 anymore. It works with stable (4.4) http://ix.io/1z5S Any hints?

Hello everybody ! I'm a newbie RK3288 and Miqi board. When using this board I'm get a idea "Why bring all firmware on SD card into eMMC", because Miqi board will run faster than using SD Card. But, I haven't found any guide to solve this. So, I hope you can help me. Thank for your reading TonyHCM.

I have Firefly RK3399 board. I ran armbian from SD card successfully the first time. After full init, I ran nand-sata-flash.sh install script, also successfully. But then I can't boot from the same SD card anymore. I always boot from the eMMC memory. I expected that boot sequence would be set on SD card first, then check eMMC.

Here I found a bug in Nanopi M4. When I download BitTorrent file through ipv6(use Transmission,qbittorent...),the network will crashed. And I even can't ping it successful. When I connect it in local.I don't see any log in the network service. And when I replace the network card(1000Mb) with a usb network card. The network work very good.And didn't appear any problem. I have try all the linux system include the office system. the problem happen again. So I only can use the usb network card or wifi. Does anyone who know how to solve the problem??? I would be very grateful for it. I noticed a same problem in firely boar…

Nanopi Neo4 armbian5.65 Mac address is no fixed。 Every times setup my Neo4 the MAC address is diffenence。 Who can help me. forgive my pool English. Thanks

I see the latest images for the Rock64 are marked as desktop. I am looking for a lightweight server only version. I still have an older server version that I downloaded a while ago, specifically 5.59. If I install 5.59, can I do and apt-get update/apt-get upgrade to get to the latest version? Any issues with that approach? Thanks!

Hi All, Below command works well on my other boards(Intel with Fedora and Ubuntu) $ compton -b --backend xrender This command make windows background transparent so it doesn't hide lower window completely. But same command doesn't work on RK3288/RK3399 board. Any idea what should be done to achieve same. Does anyone have idea if anything customized in x-server related to this?

Hello, I have using "rock64" board. I have installed gstreamer and mpp for rockchip. Can you provide me exact pipeline for gstreamer in which we can use mpp-hardware codec? Thanks and Regards, Kishan Patel.

Hey I'am searching the Linux kernel headers for 4.4.162-rockchip64 only have found the 4.4.152 can any one help me? thanks

I built up a NanoPC-T4 with a 240GB NVMe. I am using the supplied heat sink and the black metal case that FriendlyArm sells. While I was copying an image over I got a board failure. A reset and power cycle didn't work. The stat light no longer shows activity. Just power.. that is all. Amazon was great and replaced the board. I am in the process of backing up my NVMe. After the backup I will run an OS install and restore the image. Has anyone else ran into this ? The black metal case isn't hot enough to burn my hands.. it's just very warm to the touch,. Welcome to ARMBIAN 5.67 user-built Ubuntu 18.04.1 LTS 4.4.166-rk3399 …

Hi everyone, Big fan of debian based distro's. Have six Rock64's and looking for a newer kernel (4.9+) with default Ubuntu modules list. 3 have eMMC cards and 3 using the Pine64 USB->SATA adapter with SSD drives. I have powered usb hub, y cables, etc but am using USB2 without powered hub because it's reliable as is and USB3 boot with any distro power injection seems unreliable. Not too concerned about throughput. Ayufan's release bionic-minimal-rock64-0.7.11-1075-arm64.img.xz with 4.4 is very stable on these. However Ayufan's mainline kernels after 4.4 are stripped right back. I spent a couple days compiling kernels with Ayufa…

When you do gdisk -l /dev/mmcblk1 or fdisk -l you can se that the partition table that armbian is using is MBR (dos). Is any particular reason for this? When you go to the new and improved firefly rk3399 manual page you can see it is making problem when flashing through USB-C cable and upgrade_tool v. 1.24 and v. 1.34 (GBT friendly) http://wiki.t-firefly.com/en/Firefly-RK3399/flashing-notes.html .

I'd like to build a portable LimeSDR Transceiver. I would like to use a USBC 1080p IPS touchscreen. Has anyone had any experience with USBC touchscreens with the RK3399 SBC ?

Here's a video of GQRX receiving NOAA Weather Radio on my NanoPC-T4 armbian-nanopc-t4-gqrx-gnuradio.mp4

I had backup all emmc of m4. after i restore the emmc. the two device have same mac address. eth0 and wlan0 all is same. how to change the mac address of wlan0? i try many way to change it. all don't work. i need some help i had try direct setting the Networking manager, to let it have random mac address. but don't work. i had try use /sbin/ifconfig to setting it, still don't work...

Hi guys, just wanted to let you know that I have no a Nanopi Neo4 and NanoPC T4 here on my desk. So if you need help in testing, please let me know. If the Neo4 just had a little more RAM - it's a real cute board size, but hot without cooling unit Michael

Hello everyone, I have an issue in here. I'm very new to these things so have little knowledge and thus, forgive me if i ask something stupid but i have a problem. I have installed armbian debian verson to my NanoPC T4 and installed i3wm and did a lot of configuration and filled it with junk but i almost achieved what i'm trying to. Yet as i mentioned, i also filled with a lot of junk while trying to achieve my setup for my project. Anyway, from what i know is that what i'm asking is not the linux way but while trying, i found a problem on my case. I wanted to make a clean installation and fill the things i found out worked with the se…

Related to It looks like the problem's related to the USB autosuspend. Googling "xHCI host not responding to stop endpoint command." seems to say so. I've been trying to disable the USB autosuspend but no success. I followed all possible ways described in https://unix.stackexchange.com/questions/91027/how-to-disable-usb-autosuspend-on-kernel-3-7-10-or-above and https://www.kernel.org/doc/Documentation/usb/power-management.txt but $ cat /sys/module/usbcore/parameters/autosuspend always returns 2 Board: NanoPi M4, 4GB with Armbian_5.65_Nanopim4_Debian_stretch_default_4.4.162.7z

Hi, I'm making a Media Box. I've got MVP compiled and optimized for gstreamer vaapi support. I was wondering how far off is DRI2 support for the mali fbdev armsoc kernel driver ? I haven't found all the source to build it. Rockchip doesn't list the NanoPC-T4. Is the FireFly a close fascimile ? The only reason whysk is I noticed the Firefly dtb is included in my nanopc-t4 install. The RockChip's Github repository for x86-video-armsock didn't list the NanoPC-T4 in their source. I found SunXi, Allwinner, and Firefly Also would using the rev04 dtb fix some issues (bluetooth) Sometimes bluetooth initializes.. for several rebo…

On Rock64, I use youtube-dl CLI app.to download the video (720p) during my off-peak bandwidth time, and watch with MPV or VLC later in fullscreen (1920x1080). It plays OK, but this drives the temperature up to 89-92 ! This is a monitor of the results: http://davekimble.net/problem.video.replay.txt . I think the dropped frames are because of 25 fps v 60 fps of the monitor. I know it is a lot of work, but any ideas for reducing the workload welcome. Anybody else get this?

Hi everybody, I am currently facing some struggles with the nanoPC-T4 recently bought to run armbian. When I got the board, I was able to run android default installed OS, but also armbian from a SD card. But along the way, I decided to install armbian on an NVMe SSD memory to prevent running the OS from the SD card, anyway ... That when I started playing to with the kernel build, u-boot, flashing the emmc etc .. I tried couple of times using the rockchip tool : developtool in MASKROM to play with the EMMC because I couldn't boot from the SD card, and wanted to start with a clean emmc, but every time the tool had to execute a libusb_bulk_transfer, …

I've got bluetooth working flawlessly. OpenGL works fine, Plex Media Server works , SONICC, RADARR all performed well, I built the latest and greatest Plex Media Player. A attempted to get VDPAU acceleration working. I'm running the nightly build with the nanopc-t4 overlay. Just about everything works. video playback works with GL accelleration but VDPAU is needed for mkv files. I installed the vdpau mesa support, and tried the libvdpau-sunxi1 driver. Is there anyone else working on something similar ? vdpauinfo display: :0.0 screen: 0 Error creating VDPAU device: 25

https://rosenzweig.io/blog/a-panfrostian-october.html The dev machine they used seems to be a rk3399 based chromebook. Looks like they will get a working panfrost after all!

I just bought one NanoPi M4 on FriendlyArm Black friday, I was wondering if the Raspberry Pi Oficial 7" display works with the DSI connect on NanoPi M4?

Greetings, i have installed armbian to my new nanopct4 (4.4.162 with full armbian firmware), There is no hci device showing up so no usable adapter. I have no idea what to do, i have problems with 2.4 ghz wireless networks, 5ghz works fine. any help or hints?

Gentlemen, I have a rock64 board, and I would like to use an external RTC module with DS1307 chip. Unfortunately the armbian kernel does not provide DS1307 driver by default: root@rock64:~# cat /boot/config-4.4.162-rockchip64 | grep DS1307 # CONFIG_RTC_DRV_DS1307 is not set I don't have the programming skills for sending a pull request to enable this module. Could you please enable this module for ROCK64? I believe other ROCK64 owners may also benefit from this driver, as the board does not expose a working RTC, and DS1307 is a very common RTC chip. Thanks in advance.

I have a Rock64 powered by Armbian version 5.60 kernel 4.4.162-rockchip64 Ubuntu Bionic How can I activate i2c0 and i2s0 ports for connecting a 16x2 characters LCD display like 1602LCD and a PCM5102 DAC ? I'm trying armbian-config and I'm reading https://docs.armbian.com/User-Guide_Allwinner_overlays/ but I'm getting no help. Thanks for advance.

Hi armbian community, Does someone know, if it is possible to boot armbian from external ssd via usb using a NanoPi M4. If yes, is there somewhere a how-to? - I did not find anything so far about this topic. with best regards, newAB

So now I am playing with Rock64 4GB. I installed the Armbian_5.65 server edition OS and then installed xorg, lxde, and lxdm., then rebooted into a working system. Final stage of setting up was to test rhythmbox_3.4.2 and there was no sound. pavucontrol > playback shows the app is running and the worm is leaping about, but absolutely no sound. Same playing a .wav file with mpv, or indeed any player. Is there something unusual about the audio socket, or some other limitation. armbianmonitor -u = http://ix.io/ltt0

Hi, the rockchip64 missing the gre modules for ipv4 and ipv6. they had been existing in 4.4.156-rockchip64 /lib/modules/4.4.156-rockchip64/kernel/net/ipv4/gre.ko /lib/modules/4.4.156-rockchip64/kernel/net/ipv4/netfilter/nf_nat_proto_gre.ko /lib/modules/4.4.156-rockchip64/kernel/net/ipv4/ip_gre.ko /lib/modules/4.4.156-rockchip64/kernel/net/netfilter/nf_conntrack_proto_gre.ko /lib/modules/4.4.156-rockchip64/kernel/net/ipv6/ip6_gre.ko is it possible to add these? thx in advance meno

Can someone please help me understand how Armbian for Rock64 is developed? In the past, there was an image for the Rock64 that was a server image, not a desktop image. Now, I see Ubuntu and a Debian Stretch desktop images, no server image. Is there a plan to build a server image going forward? Also, will a newer kernel be built at some point? Not trying to stir the pot or cause trouble, just trying to understand where the Rock64 support is going in the future. Thank you for all the spectacular work the Armbian team does.

Hello all! I have a NanoPC-T4 and I'm currently using Android 8.1. I suppose I could flash Ubuntu to try this, but before that, here goes. I'm trying to use a USB 4G dongle with it. I get no recognition of the device. No RNDIS or any notification at all. Fresh install. Any ideas? Also, has anyone tried to come up with a method of root for android on this device? It's a super cool sbc! Thanks!

Hello. I bought a Rock64 and I have a lot of errors. Im using a eMMC 32GB Storage with Armbian 5.65 stretch 4.4.162 Desktop, Ethernet connection with TP-Link switch, a Wireless Keyboard with touch pad and the original 5V 3A Power Supply. HDMI is connect to a HDMI Splitter/Switch. The Rock64 is placed in the Aluminum casing. Full-Log: http://ix.io/1rce The system is reboot very often before i see the Desktop. Sometimes only after several resets. Can someone help me?

Hello! I've recently installed NextCloudPi, which ships Linux 4.4 by default (linux-image-rockchip64 - Linux kernel, version 4.4.159-rockchip64). Is it OK to update to linux-image-arm64? As far as I understood, mainline Linux supports RK3328 chip since version 4.14. Thanks a lot!

Armbian version: Armbian_5.65_Rock64_Ubuntu_bionic_default_4.4.162 the stuck prompt message: rock64 login: [OK] Started Update UTMP about System Runlevel changes. I MUST press enter key to continue the startup progress, please help me to fix the bug. Thanks very much

Working on the rockchip64 family dev images, since 4.19 is an LTS and the RK3328 support is somewhat workable. With a reminder of something I failed to read by @JMCC, I got this today: ____ _ | _ \ ___ _ __ ___ __ _ __ _ __| | ___ | |_) / _ \ '_ \ / _ \/ _` |/ _` |/ _` |/ _ \ | _ < __/ | | | __/ (_| | (_| | (_| | __/ |_| \_\___|_| |_|\___|\__, |\__,_|\__,_|\___| |___/ Welcome to ARMBIAN 5.65 user-built Debian GNU/Linux 9 (stretch) 4.19.0-rockchip6 …

Your build Armbian 5.65 kernel 4.4 and my build 5.65 the same kernel - system has sound only via HDMI monitor. Is it possible to enabled audio via 3.5 jack or external USB sound card?

Hi, community. I have set up this device from which I'm writing this, installed Armbian from SD card, by sweeping out original FriendlyElec images from the FriendlyElec's partition, so I wiped off the Android and Ubuntu, and copied on it the Armbian image, which appeared with the title "RAW". Booted and installed fine. It works. From armbian-config I managed to boot from an USB Toshiba 1Tb disk. To this part, I have a little but efficient linuxPC, ¡¡¡THANK YOU!!!. I'm trying to compile binaries of STM32, or Arduino devices, comment this to tell details only. Every 5 to 8 bootups, it didn't recognize the USB drive, and dumps a series of Hex data, divided in bunches. S…

Hi! I'm trying to create a vpn access point with a Rock64. I'm receving a low speeds with openvpn but the openssl tests show that there is crypto acceleration. I'm new to all of this. I assume the vpn speeds would be much higher since crypto extensions are enabled in armbian, that's why I choose the Rock64 and Armbian. This is the openssl test: openssl speed -evp aes-256-cbc Doing aes-256-cbc for 3s on 16 size blocks: 14416568 aes-256-cbc's in 3.00s Doing aes-256-cbc for 3s on 64 size blocks: 10625804 aes-256-cbc's in 3.00s Doing aes-256-cbc for 3s on 256 size blocks: 4907054 aes-256-cbc's in 3.00s Doing aes-256-cbc for 3s on 1024 size blocks: 1594735 aes-256-cbc's i…

Hello everybody, bought a Rock64 4 GB recently and I´m not able to boot it with any provided armbian Debian/Ubuntu image. With the Ubuntu Image ethernet doesnt seem to be initialized and with Debian there is activity on the eth port, but no connection, neither of the images show any output on the screen. Also i tried various SD-Cards and different image burning programs. Openmediavault works flawlessly, so I can exclude Hardware issues.

I'm considering buying a Rock64 4GB to use a Docker server running media apps (plex,sonarr,radarr,jackett,smb,etc). I already have a 64GB SD card available for this system, probably overkill, but I have it. I noticed another post saying the SD card performance is not what it could be. I'd like to hear from other have a similar setup to what I'm thinking about. Does it perform well enough for what you're using it for? What are you using it for? What kind of samba through put do you get on the USB2 and USB3 (perhaps with the USB3->SATA adapter) Thanks.

Hello everyone, I'm trying to build a kernel so that OTG USB interface with Type-C connector could be accessed as usb0 network interface . If someone managed to solve this - please, share your experience .

Hi there, I'm trying to made a dts file to handle a pican2 hat on ROCK64 armbian, but now I'm stuck. I'm a noob in writing dts files, I've tried to take as exemple dts from RPI and Thinker. edit: I've rebuild the kernel, and build the mcp251x.ko module, it load like a charm. But I assume I've to write a correct .dts file to link it to my devices tree. here is my loaded modules list: Module Size Used by can_bcm 24576 0 can_raw 20480 0 can 53248 2 can_bcm,can_raw mali 262144 0 rt2800usb 28672 0 rt2800lib 81920 1 rt2800usb rt2x00usb …

/proc/sys/crypto doesn't exist, so anything checking the status of /proc/sys/crypto/fips_enabled fails terribly. (Specifically trying to bring up a FreeIPA server which includes tomcat-based Dogtag CA, it checks for FIPS during setup, dies). I see there is an rk_crypto kernel module available, so I don't know why /proc/sys/crypto itself is missing. I tried 'modprobe rk_crypto' and it loaded (appears in output of 'lsmod'), but /proc/sys/crypto still doesn't exist.

Dear all, i have been using Armbian bionic currently running kernel 4.4.156-rockchip64, for sharing files over the internet, i am currently using sshfs. Openssl benchmark ls as followed OpenSSL 1.1.0g 2 Nov 2017 built on: reproducible build, date unspecified options:bn(64,64) rc4(char) des(int) aes(partial) blowfish(ptr) compiler: gcc -DDSO_DLFCN -DHAVE_DLFCN_H -DNDEBUG -DOPENSSL_THREADS -DOPENSSL_NO_STATIC_ENGINE -DOPENSSL_PIC -DOPENSSL_BN_ASM_MONT -DSHA1_ASM -DSHA256_ASM -DSHA512_ASM -DVPAES_ASM -DECP_NISTZ256_ASM -DPOLY1305_ASM -DOPENSSLDIR="\"/usr/lib/ssl\"" -DENGINESDIR="\"/usr/lib/aarch64-linux-gnu/engines-1.1\"" The 'numbers' are in 1000s of bytes per…

Luks encrypted devices need this cipher: aes-xts-plain64 I get these error messages: > Check that kernel supports aes-xts-plain64 cipher > device-mapper: table: 254:0: crypt: Error allocating crypto tfm It seems that at least the following modules are needed: xts, aes-x86_64 They are misising in all armbian debian kernals for rockchip. Could you please add them?

The wireless interfaces are not coming up [ 16.959456] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 16.969238] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 16.971635] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 16.971650] cfg80211: failed to load regulatory.db [ 41.751941] rk_gmac-dwmac ff540000.ethernet eth0: Link is Up - 100Mbps/Full - flow control off [ 41.751976] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready

Hi, I received my new rock64 today and I downloaded this image https://dl.armbian.com/rock64/Debian_stretch_default_desktop.7z I used Etcher as recommended to create the SD card and booted off of it with just power and network connected as I assumed it would boot, assign a dhcp address and bring up sshd so I could remote onto it. I scanned my network to see if any new devices had been added with dhcp, but couldn't see anything new so I connected the rock64 up to a TV and then booted it up, connected up a keyboard and noticed it ran through an install process on first local login. I followed all the directions and a desktop appeared on s…

Trying to choose between an eMMC module or a USB Flash drive for the boot volume on a Rock64. I have a few Rock64's that I'm building as various services (Nextcloud, Pi-Hole, VPN, OMV, and/or Netatalk Backup). None of these devices will need large boot volumes as the data will be in secondary (Hard or SSD) Drives or will require VERY little data storage. On the RPi's that the Rock64's are replacing, I've been using USB Flash drives for booting. I get the feeling that an eMMC module is a better choice, but do have any real knowledge. Are the eMMC modules more reliable and less prone to corruption that USB Flash Drives? I do have some 32GB and 64…

I'm building a portable battery powered NAS because syncing and having everything multiple times on all my Android devices sucks. I took my old Banana Pi connected a SSD to the SATA port and made it a access point (no Samba yet installed). Booting from the 16GB SanDisk Ultra A1 is 27 seconds. Moving everything to the SSD in armbian config is also 27 seconds (no difference?) I know the Banana has not the fastest SATA and NIC and that USB 3 on the Rock64 is faster. But i don't copy tons of gigabyte to the device everyday and for streaming over the WiFi stick it's fast enough. I'm interested on the boot time of the Rock64 (e…

Hello, Each time I'm booting the Rock64, it starts on Jan, 21 of 2016 but the filesystem has a superblock on Jan,28 of 2018, so in the future. It's inconsistant and the filesystem is checking each time and I'm waiting a few seconds. How can I avoid this trouble ? Here is the screen shot of logs through the tty/usb console. I'm booting from the spi flash and a sd-card with Ubuntu 18.04.1.

Hello I recently set up NextCloudPlus/NextCloudPi on a Rock64. I used the image that can be downloaded from the ownyourbits website, cat /etc/*-release resulted in the following output: BOARD=rock64 BOARD_NAME="ROCK64" BOARDFAMILY=rk3328 VERSION=5.44 LINUXFAMILY=rk3328 BRANCH=default ARCH=arm64 IMAGE_TYPE=user-built BOARD_TYPE=conf INITRD_ARCH=arm64 KERNEL_IMAGE_TYPE=Image 03af3b07-6131-4b1c-8cc2-7f716caf75e1 # PLEASE DO NOT EDIT THIS FILE BOARD=rock64 BOARD_NAME="ROCK64" BOARDFAMILY=rk3328 VERSION=5.44 LINUXFAMILY=rk3328 BRANCH=default ARCH=arm64 IMAGE_TYPE=user-built BOARD_TYPE=conf INITRD_ARCH=arm64 KERNEL_IMAGE_TYPE=Image PRETTY_NAME="Debian GNU/Linux 9 (stretch…

I'm trying to switch the upper USB port to peripheral mode so I can use the ethernet gadget on it. Has anyone done anything like that before? I've got an issue here https://github.com/ayufan-rock64/linux-build/issues/117 with some of the things I've tried already.

I'm starting to add RK3399 to Armbian, in my spare time. Here's the board I got, RK3399 official EVB, which spent me 500CNY (~63EURO) on Taobao, quite cheap comparing to Firefly. https://item.taobao.com/item.htm?spm=a1z09.2.0.0.1f30a53flpk7IA&id=554454257549&_u=31t0eea9a1c Spec: - Rockchip RK3399 (2xA72 + 4xA53, Mali T860 MP4) - 4GBytes Dual channel LPDDR3 (64-bit in total) - 8GBytes eMMC, Micro SD Slot - USB 3.0 Type-A, USB Type-C (DP over Type-C), USB2.0, HDMI - 1G Ethernet - Raspberry Pi compatible 2x20 pin header - Other interfaces: PCIe 2.0 x4, MIPI CSI & DSI, eDP, LVDS.... …

Good evening, I have a Rock64/4G board and just downloaded and installed the Armbian_5.42_Rock64_Debian_stretch_default_4.4.124_desktop.7z to the SD card. After the reboot I saw X11 login interface and everything was great. After that I installed the latest packages with an apt update and then apt upgrade and restarted. Now I only see "rock64 login:" on the screen. The Xorg.0.log I have attached looks actually quite good. Xorg.0.log

I'm trying to get wifi working on my Rock64 running the nightly server image. Is this possible?

New user of a Rock64 board, I've tinkered with a RaspberryPi and BeagleBone before but wanted something to set up as a home media server. I flashed the SD card with an "Armbian_5.42_Rock64_Ubuntu_xenial_default_4.4.124" image and it worked perfectly fine at home, connecting to my network, etc. However, I took it to a new location and it straight up refuses to boot. I've tried it on several displays and with several HDMI cables. It hangs for a solid 30-45 seconds after initiating boot with a black HDMI screen, and then turns off and back on dumping a log citing either spinup shutdown errors or a temperature shutdown on Core 0. I've flash…

Has anyone been able to build ZFS/SPL?: checking linux distribution... ubuntu checking default package type... deb checking whether rpm is available... yes (4.12.0.1) checking whether rpmbuild is available... yes (4.12.0.1) checking whether spec files are available... yes (rpm/generic/*.spec.in) checking whether dpkg is available... yes (1.18.4) checking whether dpkg-buildpackage is available... yes (1.18.4.) checking whether alien is available... yes (8.95) checking spl config... all checking kernel source directory... /usr/src/linux-headers-4.4.115-rk3328 checking kernel build directory... /usr/src/linux-headers-4.4.115-rk3328 checking kernel …

I do have a setup: 2.5" disks connected to the powered USB 3.0 hub. The power adapter is 10A. If I do start rsync copy from one disk to another after a while I'm getting the error: rsync error: error in file IO (code 11) at receiver.c(393) [receiver=3.1.2] All disks disappired. There is no way to return them back, only reboot helps. In dmesg I could find that device jsut stopped and disappired: [ 2342.927583] usb 5-1.1: USB disconnect, device number 3 [ 2342.931057] usb 4-1: USB disconnect, device number 2 [ 2342.931975] usb 5-1: USB disconnect, device number 2 [ 2345.629932] usb 5-1.3: USB disconnect, device number 4 [ 2345.663838] usb 5-1.4: …

I'm running Armbian on a 4 GB Rock64, downloaded and installed yesterday. I've been using Debian/Raspbian/Armbian for about 10 years and I've really come to rely on Synaptic for searching and being able to make download scripts. Not every day but about once a week especially if I'm setting up something (like this Rock64). This Synaptic's access to the package database seems incredibly slow. A single search may take 20 minutes. After installing something it reloads the list and shows it on the screen, that can be another 20 minutes. During this time it's got 1 thread using 100% of one CPU. Typing is sometimes impaired, window repainting usually. …

I'm trying to use it with a TV that has HDMI input but it's 1360x766. xrandr says it's running at 1920x1080. It's very small, like keep a magnifying glass handy, and I don't have the bottom of the screen where LXDE puts the pager and buttons. I thought from my Raspberry Pi experience that I'd just change the mode in my config.txt https://www.raspberrypi.org/documentation/configuration/config-txt/video.md but apparently the Rock64 isn't that evolved. Can I set an HDMI mode in my armbianEnv.txt? Can it use CVT modes? The standard 1360x768 mode isn't quite right. I've been around this stuff since you had to work out an xfree86.conf file on paper and take ti…

Hi, I'm looking for the headless version of stretch and xenial for the rock 64. I only see the gui versions of strtech and xenial on the website. I got a special download from Igor a couple days ago but it has some strange issues so I was hoping to find a release version to try. Thanks! Mark

Hey fellow tinkerers, I'm pretty happy with my Rock64 boards so far, however, when I recently upgraded the kernel on the oldest one and rebooted, I couldn't ssh back in. So I hooked it up to a monitor and was blown away from all the error-like text that kept flowing on my screen. Since I have if this is logged anywhere (I looked but couldn't find anything after mounting the sdcard in my laptop), I had to film it. See attached video. It basically consists of lots of errors formatted like this: [<ffffffxxxxxxxxxx>] and a lot of errors looking like this: dma-pl330 ff1f0000.dmac: pl330_update:1783 Unexpected! Is there any way to s…

Hi, I'm unable to get my Rock64 to boot either the Xenial or Stretch Armbian images from SD or Emmc. I can get all of the other OS's to boot fine off of either media. Ive tried with multiple Emmc chips, SD cards and Rock64's with the same results so its not the hardware. Seems like it cant find the boot loader. Ive used win32diskimager, Etcher and the Rock64 instakk software. I've formatted the SD card completely, used new SD cards... I'm stuck! Any suggestions Thanks!

Is there a guide somewhere how to enable 1wire support on a rock64 using stretch or xenial. Im trying to read a dallas DS18b20 sensor. I see some examples for other boards but cant figure out how to apply them to the Rock64. Thanks

Has anyone here tested the Rock64 successfully with an u-boot version which is not the one from ayufan? I did not have much luck with the rk3328 default config and mainline u-boot when I tried it a while back. The same is true when I tried to use the board config from ayufan with mainline u-boot. The version by ayufan is working in principle but also is rather dated as far as I know and therefore does not support some newer features. Anyone knows if the version from ayufan will be bumped or has a working config for a more recent u-boot version?

Hello......could anybody tell me at least which image i have to use if i want to build armbian for the FriendlyArm NanoPC-T4? Couldnt find anything...... Thanks

Hello, I need some help to find an U-Boot image to flash on rock64 so that armbian boots directly from USB3. Where can I find it. If your answer is to build my own U-Boot image, please give me step by step instructions. Thanks a lot

I got the Rock64 specifically for router-like functionality. In addition to the native ethernet port, I've added two USB3 RTL8153 Gigabit adapters: http://www.realtek.com.tw/products/productsView.aspx?Langid=1&PFid=56&Level=5&Conn=4&ProdID=326 I've tried multiple 0.5.x and 0.6.x Ayufan images, and also Stretch armbian here (which also uses the Ayufan kernel). I've tried both the 4.4 kernel all these distros come with, and up to 4.17 as well. In all cases I see terrible and unreliable USB3/USB2 and ethernet performance. In the Armbian Sketch image I see 'eth1' go up and down contstantly: …

Hi, I've burn "Armbian Stretch desktop legacy kernel 4.4.y" on sd card on use nand-sata-install on emmc but when I remove sd card it's no boot. I read on Pine forum we must put a jumper on "emmc pin" then remove 3/4s after power on. So I've try but no success. I can see emmc when I boot from sd card but no more.

/usr/lib/dri/rockchip_dri.so just doesn't exist but not really sure if the xorg package is the xenial one or rockchip one. If it is the rockchip one then for some reason rockchip_dri.so isn't being built. On a startx it gives it a good go but always drops out to software rendering because its missing the above.

Debian Stretch and Nextcloud 13.0.2 Image available for testing at https://ownyourbits.com/downloads Initial testing shows no problems other that some small adjustments that need to be made for all armbian images: static IP and mDNS. More testing is welcome and feedback appreciated! Cheers, Nacho

Hello, I was able to overclock the CPU to 1.488Ghz by editing rk3328-rock64.dtb file. But I can not figure out how to set the RAM-clock-speed. Is there any chance to ramp up the RAM clock?

Hello. Please could someone help me to solve this issue? I have a wifi dongle recognized as: Bus 002 Device 002: ID 148f:5572 Ralink Technology, Corp. RT5572 Wireless Adapter I am trying to use it on my Rock64 and ARMBIAN 5.42 testing Debian GNU/Linux 9 (stretch) 4.4.124-rk3328 uname -a: Linux rock64 4.4.124-rk3328 #24 SMP Wed Mar 28 17:15:52 CEST 2018 aarch64 GNU/Linux It seems it is recognized correctly: Spoiler lsmod: rt2800usb 28672 0 rt2800lib 81920 1 rt2800usb rt2x00usb 20480 1 rt2800usb rt2x00lib 49152 3 rt2x00usb,rt2800lib,rt28…

I tried the stable Arabian image for rock 64 and found out that full HD video is played with strong brakes, when playing HEVC image is missing How to force video to be reproduced normally, maybe I don't understand something ?

The xenial img from dl.armbian.com works fine, but doesn't have SCTP support, so I wanted to compile my own image. Did a "show kernel config" and built an img. When I boot: In LPDDR3 786MHz Bus Width=32 Col=11 Bank=8 Row=15/15 CS=2 Die Bus-Width=32 Size=4096MB ddrconfig:7 OUT Boot1 Release Time: 2017-05-18, version: 2.43 ChipType = 0x11, 128 SdmmcInit=2 0 BootCapSize=2000 UserCapSize=29820MB FwPartOffset=2000 , 2000 SdmmcInit=0 2 StorageInit ok = 267624 Raw SecureMode = 0 SecureInit read PBA: 0x4 SecureInit read PBA: 0x404 SecureInit read PBA: 0x804 SecureInit read PBA: 0xc04 SecureInit read PBA: 0x1004 SecureInit ret = 0, SecureMode = 0 LoadTrustBL No find bl3…