Rockchip

Last night I shutdown my Helios 64 (sudo shutdown now) but when i went to boot it this morning, after startup it looks to be hung, all blue lights solidly on. It's set to run from the micro SD card, so wondering if i hit a R/W limit on that. Serial log below, it doesn't progress beyond "starting kernel" I can mount the MicroSD on my ubuntu box and read the file structure DDR Version 1.24 20191016 In channel 0 CS = 0 MR0=0x18 MR4=0x2 MR5=0x1 MR8=0x10 MR12=0x72 MR14=0x72 MR18=0x0 MR19=0x0 MR24=0x8 MR25=0x0 channel 1 CS = 0 MR0=0x18 MR4=0x1 MR5=0x1 MR8=0x10 MR12=0x72 MR14=0x72 MR18=0x0 MR19=0x0 MR24=0x8 MR25=0x0 channel 0 training pass! channe…

Hi, everyone. The Kobo site is kind of difficult to navigate if you're looking for relevant information, but I came to the conclusion that this is the right place for support. Forgive me if I'm mistaken. I was wondering if someone could help me interpret these bootlogs from serial term when trying to boot my Helios64 from the EMMC. Following the instructions on Kobol's site, I flashed their u-boot image to an sd card, booted the Helios64 off of said sd, fetched the latest image of Armbian, unpacked that image, and flashed it from my laptop to the Helios64 via usbc to what I presume is the correct interface. Could it be that I messed up? Here's a quick example …

Hi! I'm trying to install NUT because I connected a UPS device. I'd like to get it working so that the server is shutdown safely when there is a power interruption and that I get an e-mail notifying me as soon as there is an interruption. Already after installing via sudo apt install nut nut-client nut-server I get the following warnings: Setting up nut-client (2.7.4-8) ... Job for nut-monitor.service failed because the service did not take the steps required by its unit configuration. See "systemctl status nut-monitor.service" and "journalctl -xe" for details. invoke-rc.d: initscript nut-client, action "restart" failed. ● nut-moni…

(Note: this is crossposted from an ATS issue, since I think it might be quicker to get answers here. Will post on one thread when I get answers that work in the other) Have installed ats on my Rock64, running Armbian 22.05 Jammy with kernel version 5.10.63, and am having trouble getting the fan to spin. The fan I'm using is the one that comes with this case, and it spins when I connect it to a battery. One possible issue is that I had to manually add an entry for PWM_CTL: running sudo find /sys -name pwm\*, I get: /sys/kernel/tracing/events/pwm /sys/kernel/tracing/events/pwm/pwm_apply /sys/kernel/tracing/events/pwm/pwm_get /sys/kernel/debug/tracing/events/p…

Hello to everybody ! I'm new to this forum and to linux. After installing my Helios64 recently, I had a few problems and had to go with the eMMC maskrom installation which were fine. PS : I've installed on top of the linux kernel (4.4) Open Media Vault (latest version). After installing everything, I've noticed that the fans were not functioning. I've checked the documentation on kobol.io site and went to the /etc/fancontrol config file and set the values as it was shown on the doc. I've restarted the fancontrol service, but still nothing. I've tried to read the pwm of my fans (has fan P7 were linked to the hwmon0 : cat /sys/class/…

Hi, I want to ask, if there's a way how to turn off Helios64 without the 100% fan spin. It only takes 1 second but it's very annoying when I want to turn it off during the night. Looking https://github.com/armbian/build/blob/master/packages/bsp/helios64/fancontrol.conf and https://wiki.kobol.io/helios64/pwm/ No luck :Z

hi, i have only one fan that spin, i have set the systemctl stop fancontrol and checked the pwm1 the value is 255, and only one who spin i can turn off the only fan spinning with value 0, but i can't control the seconds fan at all, i have verified the connectique on the board and everything is fine, when i opened it and checked without disk , and i saw that both fan was spinning, so i thought it was fine, when i closed the board and disk's are on, i again have the same issue, i can control only 1 fan, it's always the same one. any idea how to fix this issue? is it a software related?

Hi, To my side, below work in root but not with systemd service: # Helios64 PWM Fan Control Configuration # Temp source : /dev/thermal-cpu #INTERVAL=10 INTERVAL=30 FCTEMPS=/dev/fan-p6/pwm1=/dev/thermal-cpu/temp1_input /dev/fan-p7/pwm1=/dev/thermal-cpu/temp1_input MINTEMP=/dev/fan-p6/pwm1=40 /dev/fan-p7/pwm1=40 MAXTEMP=/dev/fan-p6/pwm1=50 /dev/fan-p7/pwm1=50 MINSTART=/dev/fan-p6/pwm1=20 /dev/fan-p7/pwm1=20 MINSTOP=/dev/fan-p6/pwm1=20 /dev/fan-p7/pwm1=20 MINPWM=20 To my side, below work in root and with systemd service: # Helios64 PWM Fan Control Configuration # Temp source : /dev/thermal-cpu INTERVAL=10 …

Hi, I think I may have posted about this in a few places, but I'm not sure where most are looking to discuss helios64 issues. The problem I am having is that the fans do not turn at all. As per the wiki, I've tried setting fancontrol off, and checking that the pwm value goes to 255, which it does but still no movement. I am using the fans supplied in the kit. There is nothing obstructing the fans, and sometimes if I disconnect and reconnect them from the board they will twitch a bit, or spin for a short while (until the connector is fully down against the board), but nothing otherwise. I've also tried heating the cpu up to ~85C (e.g `cat /dev/rando…

Hey guys, First of all I would like to let you know that the default DTB has an issue, the GPU status is disabled by default. I've changed this & now my GPU is detected & working fine so far. (Armbian Jammy current) But I'm also facing some other Issues.... not all USB Ports are working, just 2-3 & the working ports sometime are randomly switching after a reboot. Bluetooth isn't working at all I guess these Issues are also related to the dtb file because I didn't find any entries for BT in the DTB. I also tried the other DTB file: rk3399-rock-4c-plus but I dont have any video output with it but there…

Hi everyone ! I'm really happy with my Helios64, running fine with no major issues. BUT This product can obviously be improved with future revisions, while keeping the same base. The Kobol guys told me to open a thread here to discuss what would be great improvement or new features. I'm starting with things off my mind, but please ask me to add things to this list. An explanation would be great in the comments.

My Helios64 setup has been running stable for months now (except for one MOSFET that failed and had to be replaced), however after recent updates using the OMV5 package manager I am unable to transfer files to my computer (SMB shares). When trying to transfer to a Windows computer the transfer speed immediately plummets to 0, stays there forever or File Explorer crashes/stops responding. When transferring to an Ubuntu system the transfer time outs. I can browse the files on the SMB share, I can play them (movies, music, etc) or run them directly with no issues. I can transfer files using scp with no problem (just at much reduced speed/bandw…

I've got my helios64 recently, and I wonder what type of FS to choose for main storage. I have five 4TB disk drives. I've installed OMV, made raid5 and format it with XFS. I use XFS because I work with this FS on Centos on my x86 servers, I don't use ext4 because I don't like when sometimes it starts to check filesystem during boot process. My setup is working perfect for a couple of weeks. I don't have any reboots or freezes or any issues that I've read on this forum. Now I think about migrating from XFS to BTRFS or ZFS. The main reason is to have file check-summing and scrub. Does anybody have btrfs with raid5 or ZFS with raidz1 on Helios64? Do you have any problems wit…

When can I expect a final Armbian image for the Nanopi M4 ? I'm eagerly awaiting it and many others will surely be too The image of friendlyarm is simply an imposition You have the feeling of being on the road with the handbrake on.

I have Firefly RK3399 board. I ran armbian from SD card successfully the first time. After full init, I ran nand-sata-flash.sh install script, also successfully. But then I can't boot from the same SD card anymore. I always boot from the eMMC memory. I expected that boot sequence would be set on SD card first, then check eMMC.

Recently I've been trying to build Armbian for Firefly RK3399, since I've purchased this board last year, and it has been lacking proper software support for a long time. Here is my fork https://github.com/hjc4869/build/tree/development Basically, It is a copy & paste of what's already done to support Odroid N1, by replacing the Hardkernel's kernel to what Firefly provides (an older 4.4.77 kernel), and replacing the Hardkernel u-boot with rockchip u-boot. I created a new 'firefly' board family for convenience. Also tried to build the image with some other kernel variants (Rockchip 4.4 bsp and mainline 4.17-rc6) without success, still investigati…

I built a version of Buster with the legacy kernel (4.4). when I try to install the media-buster-legacy-rk3328 package on the system, I get an error - unsatisfied dependencies on the kodi-rk package. I tried installing the Kodi-rk package manually, but it has an unsatisfied dependency on kodi-rk-bin. The kodi-rk-bin package is available and installed, but its version does not correspond to the links with Kodi-rk. Perhaps packages were updated in the repository, but dependencies do not work because of a complex package name (the alphabetical comparison condition is not met) ?

The first version of Armbian images for Station M3 rk3588s (rk3588s-roc-pc) is available. the launch is very simple - download, unpack, burn to an SD card, connect to the device and turn on the power. The system starts automatically. At the first launch, perform the initial setup in the same way as all Armbian-enabled devices. https://disk.yandex.ru/d/-zSW21XKN0pfIA

Hi FireFly station P2 on Armbian 22.11 Bullseye XFCE does not work on a 4K monitor. When turned on, ripples appear on the screen. Examples of images from links. The same problem at station M2. station m2 and station p2 do not work on a 4k monitor both

Video here: https://drive.google.com/file/d/1kv2QVMMgRizKrjZIGVVMYK3QxkswTA9K/view?usp=sharing Hi there, I have the following stack: Model: ROC-RK3588S-PC V12 (Linux) SoC: Rockchip RK3588 GPU: Mali-G610 (Panfrost/Panfork) Kernel: 6.1.0-1025-rockchip OS: Ubuntu 24.04.1 LTS (Joshua-Riek image v2.4.0) Mesa: Panfork 23.0.5 (git221210 — December 2022) Chromium: 114.0.5735.35 (rkmpp7 from jjriek/rockchip-multimedia PPA) Display: HDMI-1, 1920x1080@60Hz The problem: I'm running a kiosk application in Chromium that plays video fullscreen. The display is physically mounted in portrait mode (9:16), so I need to rotate the output 270°. When rotation is applied, a visib…

This is a HTML5 audio/video tester for web browsers: https://tools.woolyss.com/html5-audio-video-tester/ As you can see .webm is not enabled because frankly I have no idea which package I need to enable that. I have opus and av1 installed: ii libdav1d5:arm64 0.9.2-1 arm64 fast and small AV1 video stream decoder (shared library) ii libopus0:arm64 1.3.1-0.1build2 arm64 Opus codec runtime library I tried gstreamer1.0-ugly and gstreamer1.0-bad but to no avail. Any idea's which package I am missing?

Hello, target : nanopi R4S/4Gb I downloaded the last image from the armbian site for the friendlyelec nanopi RS4. I flashed an A1 SD card of 32GB. I only see one partition (after a 17MB offset). When I try to use it on my R4S, the red power led lights up, then nothing, even after several minutes. I opened the router and connected a serial converter on the console, in this case also there is no sign of life after the power on... I have flashed on another SD card an ubuntu image from the friendlyelec site. This image boots, but it seems that the configuration of the console is not the usual default one => the speed 115200 does not w…

Hello! First time poster. Been slowly learning linux over the years. Kind of a noob but maybe at an intermediate to advanced noob level. I've been having trouble upgrading firmwares. As title says, 24.11.3 breaks display. Luckily I was able to SSH in and determine 24.11.1 is functional. I'm not sure how to tackle this. I can tell you, I have many errors on startup which i have attached. I should note I do have issues interfacing with this display. While resolution is read by armbian correctly, the refresh rate is NOT. I use a capacitive touch display that can support 1200x600@60hz. Armbian attempts to use only 75hz which does not play nice. I have attempted to…

Hi folks, I got my helios64, assembled it during the weekend and can’t seem to actually install it. Here are some of the things I tried (I'm on windows 10 btw, I don’t have hdd drives yet, I assume this would not be an issue): · 2 sd cards (one of which is a Samsung as recommended in the wiki), two computers (with correct com ports as visible in the device manager, driver is installed), tried both on usb2 and usb3 · USB cable has been trimmed to fit the case properly - also tried with the back panel off and directly connected to the board · the devices starts up as soon as I plug in the power cord - I then use…

I uses my NanoPi M4 as a cheap ARM64 kvm host, and I need a newer kernel since the legacy one is kind of broken in terms of KVM. But Wi-Fi is not working in dev kernel for quite some time, I found a temporary fix for that: # cd /lib/firmware/brcm # mv brcmfmac4356-sdio.bin brcmfmac4356-sdio-orig.bin # ln -s ../rkwifi/fw_bcm4356a2_ag.bin brcmfmac4356-sdio.bin # ln -s ../rkwifi/nvram_ap6356s.txt brcmfmac4356-sdio.friendlyelec,nanopi-m4.txt Then reboot, Wi-Fi will be back.

It seems a package is missing from the Armbian 23.8 Bookworm CLI that results in this error. I encountered an add-apt-repository: traceback error. To fix it just run: sudo apt install python3-launchpadlib

Hiya peoples, Finally figured out what caused my black screen after updating After installing a new kernel (via apt) the '/boot/dtb' symlink is not updated, and fails to boot properly. lrwxrwxrwx 1 root root 31 Oct 7 11:38 dtb -> dtb-6.11.2-edge-rockchip-rk3588 lrwxrwxrwx 1 root root 38 Oct 7 08:49 Image -> vmlinuz-6.11.2-current-rockchip-rk3588 lrwxrwxrwx 1 root root 38 Oct 7 08:49 uInitrd -> uInitrd-6.11.2-current-rockchip-rk3588 So I wrote a systemd service that: 1. Runs before shutdown/reboot 2. Changes into the /boot directory 3. Reads the version from the dtb symlink 4. Reads th…

Hi All, here is a quick howto for flashing a Nanopi M4 V2 I did this using a Linux box and a USB TTL serial cable) 1) Download an image from https://www.armbian.com/nanopi-m4-v2/ 2) Start a terminal 3) cd to the folder containing your download 4) Unzip your download to extract the *.img file 5) Connect an sdcard or eMMC to your pc ( I used a transcend adapter ) 6) Run lsblk to identify your device, in my case it returned /dev/sdc 7) Run mount to ensure it is not mounted and unmount it if necessary ( umount /dev/sdc or umount /dev/sdc1 ) 8) Run dd if =NameOfYourImage.img of=/dev/sdc status=progress 9) When completed …

Hi ! Is there any chance to flash an armbian to the 16MB SPI Flash-Chip? regards, volker.

I have forgotten my user password. How to reset it? I have pressed SHIFT (LEFT, RIGHT) during many system boots but GNU GRUB has not been displayed even once. Therefore this instructions don't help me: https://www.youtube.com/watch?v=H9jjm81-nFg

Getting free() invalid pointer issue when installing / using python3. Could be dpkg issue as well ! When I did sudo apt update && sudo apt upgrade, it happened and hence I tried to reinstall. This issue occurs when trying to manage it with ansible as well. I think something might be wrong with the latest python. Board: Helios64 (I know, I know CSC) Chipset: RK3399 Apt install logs: Reading package lists... Done Building dependency tree... Done Reading state information... Done 0 upgraded, 0 newly installed, 2 reinstalled, 0 to remove and 0 not upgraded. Need to get 0 B/472 kB of archives. After this operation, 0 B of additional …

Morning all, so I got myself a FriendlyElec CM3588 NAS board for testing and in the end integrating in my homelab. I tried a few Armbian images - FriendlyElec suggests the NanoPi R6S image and I tried the NanoPC T6 image. Both boot but both have some issues, e.g. no USB connectivity and no HDMI out (T6). While not a being developer or SBC specialist, I am a Linux user since 1995 (server)/1996 (desktop) and I am used to some pain, tinkering and problem solving. Is there any kind of "getting started with a new board"- or similar document that I could use as a starting point to tinker with this board? Any hints, advice? Of course I could use the …

Hi all, I’m working with an RK3588-based board and running into a frequency scaling issue. All cores (cpu0–7) are stuck at 408 MHz, despite available OPPs going much higher (up to 2.35 GHz on the big cores). Attempts to raise frequencies via scaling_setspeed or userspace governor have no effect. The image I'm using is: https://www.armbian.com/nanopc-cm3588-nas/ (https://dl.armbian.com/cm3588-nas/Bookworm_vendor_minimal-omv) Device tree file is: fdtfile=rockchip/rk3588-friendlyelec-cm3588-nas.dtb # for cpu in /sys/devices/system/cpu/cpu[0-9]*; do echo "== $(basename $cpu) ==" cat $cpu/cpufreq/scaling_available_freque…

Hi, I'm trying to setup CM3588Plus NAS 3 x 4tb vp4300 nvme drives OpenMediaVault updated. Drives are setup to RAID5 with ext4. the OS is reporting that ssd temps getting to 63-68C while idling, and likes to creep up to 75C where if I'm correct thermal throttling starts to kick in. the SBC is in open air, no case/enclosure. room temp 21C. How to find the cause and solve it? Amy recommendations setup (change the fs) etc. Thanks a mill.

I need help with two items. 1. When directly connect to my windows 10 pro pc i get the following in device manager. ft230x. Where can I download the drivers so i can use putty to connect to the helios64. 2. One of the fans is always spinning even when i shutdown with sudo shutdown -t now. Thanks

When you do gdisk -l /dev/mmcblk1 or fdisk -l you can se that the partition table that armbian is using is MBR (dos). Is any particular reason for this? When you go to the new and improved firefly rk3399 manual page you can see it is making problem when flashing through USB-C cable and upgrade_tool v. 1.24 and v. 1.34 (GBT friendly) http://wiki.t-firefly.com/en/Firefly-RK3399/flashing-notes.html .

Hi - First let me say how gratefull I am for an Armbian version that works with my NanoPi M4 board! I am using the board as a web server and it is rock solid. My question is about the information that is displayed when I log in to my board using SSH. There is information about cpu temp, up time, etc. How is this information extracted and displayed? I am a Linux noob and I would like to understand how to get the cpu temp and other info to use at other times. Please help me as I am just starting out with SBC's. thanks---jb.

I just saw the post how to get kodi working with a legacy kernel. I want to get ffmpeg working in a docker (specifically for frigate). Do i also need to install the legacy kernel on my machine and do the same steps and only then get the ffmpeg installed in the docker or can anyone help me how to start with this.

I tried for hours last night and I couldn't get a single emulator to work, and most of them simply don't exist for this version of Debian Has anyone had any luck and with what OS

Hi, i really tried to get SPI as spidev to work on my RockPI 4A (Rev. 1.4), using armbianEnv.txt and DT overlays however nothing works as it seems it is just ignored. So does anybody have an idea of how to get SPI working in spidev mode? Because I have board which I want to connect via SPI.

I have the following hat http://wiki.seeedstudio.com/Raspberry_Pi_Relay_Board_v1.0 my image detects the i2c interfaces and mounts them in /dev as i2c-0 i2c-1 i2c-3 i2c-4, I can scan the different i2c interfaces as folloging interface i2cdetect -y 1 root@rockpi:~# i2cdetect -y 1 0 1 2 3 4 5 6 7 8 9 a b c d e f 00: -- -- -- -- -- -- -- -- -- -- -- -- -- 10: UU 11 -- -- -- -- -- -- -- -- -- -- -- -- -- -- 20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 30: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 40: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 50: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 6…

I've been struggling to get interrupt to work on my 5b with a water flow sensor. Any suggestions or help is appreciated. Here's what I've tried and validated so far: Hardware: The flow sensor signal wire is connected to wiringpi pin 2, which is physical pin 7, gpio pin 54 I've put in a pull-down resistor between the gpio pin and GND I've confirmed with a multi-meter that the signal line has a voltage of 0 when the sensor isn't spinning. I've confirmed that "gpio read 2" shows the pin as 0 in that state I've confirmed that the signal line voltage peaks to around 1.5 vdc when the …

hello, i was trying to set up a 2 pin fan on my orangepi 5b and i connected it to pin 25 and 26 (GND and PWM1). When i first started this task, the output from gpio readall would show me all 26 pins on the board. As i was digging through some forums to try and get the PWM pin to operate as on/off, i came across wiringOP and when i installed it, the output of `gpio readall` changed to only show 8pins. I am unsure of what went wrong and why it only shows 8 pins. I tried removing wiringOP and it still has not made a difference. Thanks

Hello all, I am trying to host the rtsp server using gstreamer on armbian. everything is latest and updated. I found, bare rtsp server is taking 3-4% of cpu usage. when I add timestamp and text overlay, cpu goes 23-25%. I was checking if I can enable GPU support, here is output. My system is on NVME, and its working so not sure why error popped. I am connected to wifi, so again not sure why wifi drivers are having issues. however my board never shows it has gpu. can some one guide me ? I have 2 mp camera, not a huge load. again memory is 8GB but never used beyond 1GB, but CPU is most of the time on above 70% dmesg | grep -i error …

I was wondering if the Armbian 11 Bullseye release would get a release candidate for the following ppa's for Panfrost: ppa:liujianfeng1994/panfork-mesa ppa:liujianfeng1994/rockchip-multimedia Because I was really hoping to use Debian over Ubuntu for my purposes of familiarizing myself with the distro, but only Jammy so far has a candidate for these. I also tried manually installing the Panfrost/Panfork drivers on Bullseye and only got it working once before borking my entire system, and I cannot replicate it. Any help or information would be greatly appreciated, as the GPU acceleration on Jammy is simply amazing!

Hi! I've successfully installed Armbian Bionic(kernel 4.20, automated build) image on NanoPC-T4, but gpu drivers not provided. Here output of http://ix.io/1FBI And /dev/mali0 didn't exist. The question is: how to build and install open-source drivers(I didn't find any complete instructions), I actually not so experienced on it.

Hello, I would like to install Mali-G610 drivers on my Rock5B, but getting error during adding PPA: root@rock-5b:~# add-apt-repository ppa:liujianfeng1994/panfork-mesa PPA publishes dbgsym, you may need to include 'main/debug' component Repository: 'deb https://ppa.launchpadcontent.net/liujianfeng1994/panfork-mesa/ubuntu/ bookworm main' Description: https://gitlab.com/panfork/mesa You need to install mali-g610-firmware if you don't have file /lib/firmware/mali_csffw.bin More info: https://launchpad.net/~liujianfeng1994/+archive/ubuntu/panfork-mesa Adding repository. Press [ENTER] to continue or Ctrl-c to cancel. Adding deb entry to /etc/apt/sources.l…

Here's a video of GQRX receiving NOAA Weather Radio on my NanoPC-T4 armbian-nanopc-t4-gqrx-gnuradio.mp4

Hello, I have using "rock64" board. I have installed gstreamer and mpp for rockchip. Can you provide me exact pipeline for gstreamer in which we can use mpp-hardware codec? Thanks and Regards, Kishan Patel.

I have tried the Debian image for ROCK5B and the Gnome GUI works fine there. But when booting the Armbian image (running from emmc) the screen does not notice any signal from the ROCK5B regardless of which HDMI port I try. I am using a quite old HDMI monitor (connected though a DVI-HDMI adapter). How do I debug this?

I have run into this issue multiple times and the process flow is this: Flash image "Armbian_20.11.6_Helios64_buster_current_5.9.14.img" to a micro SD card. Run through the config (installing OMV with SAMBA) Kick over to the OMV to configure the share / media so its available on my network Runs for some time (this last install was running for maybe a few weeks before it triggered a Kernel panic) Power off. Power on. Board boots, hangs on "Starting Kernel..." Is there some trick I am missing to get this thing to actually boot / reboot correctly? Troubleshooting info: No jumpers are shorted. I had a…

Subject: [R58X] Hard Brick After Failed Armbian Upgrade (Jammy to Noble) Hello, My Mekotronics R58X running Armbian Ubuntu 22.04 (Jammy) hard-bricked after a failed attempt to upgrade to Ubuntu 24.04 (Noble). Initial Failure: The upgrade crashed, and the device would not boot/log in properly . Recovery Attempt: I successfully flashed a new Ubuntu 24.04 image using the official Mekotronics documentation/tool. Current Status: After the flash completed successfully and the device went offline, it is now completely dead. It will not power on. No LED activity. I cannot enter recovery mode (Loader or Mask…

Hi Folks I am about to set up my helios64 nas on an imac mini m1 or an older intel imac mini. Buying the NAS was risky for me as I am a newbie to Linux. Nevertheless fortune favours the brave and all that. I am having difficulty finding the optimal set up of my helios64 NAS Do I buy a m.2 sata ssd and 4 western digital red pro hard drives? Do the hard drives have to be identical? Assuming I am buying Western Digital WD Red Pro NAS 4TB HDD, WD4003FFBX whats the best m.2 sata to pair up with these? I do have the 2.5 inch adapter.

Hey, I also wanted to use the Rockchip VPU inside my Jeyllfin docker-container. But on my machine (RK3389, 6.6.47-current-rockchip64, Armbian v24.8.4 bullseye), I only can only see "dri": ls -l /dev | grep -E "mpp|rga|dri|dma_heap" drwxr-xr-x 3 root root 120 Oct 18 11:18 dri How can I install the missing parts? All I found when googling was finding installing for ubuntu and not debian. For the required OpenCL (libmali) I used this: mkdir -p ~/tmp/libmali && cd ~/tmp/libmali wget 'https://github.com/tsukumijima/libmali-rockchip/releases/download/v1.9-1-55611b0/libmali-valhall-g610-g13p0-gbm_1.9-1_arm64.deb' sudo dpkg -i ./libmali-valh…

Hello, I am quite new to this topic, and I have found it to be quite complex. I primarily work with tiny MCUs and RTOSes, but I am enjoying the Linux space so far. In essence I would like to use the Mali GPU that is embedded within the RK3399 of the Helios64 for hardware transcoding. This isn't a novel idea, as shown by these sources: https://forum.armbian.com/topic/9272-development-rk3399-media-script/ https://emby.media/community/index.php?/topic/66675-36078-transcoding-rockpro64/ I am using Jellying, and in so FFMPEG to decode/encode the data streams. It seems that V4L2 is supported for hardware ecoding/decoding in the FFMPEG p…

Hi, I'm seeing the following error in Chromium when trying to play youtube, the video loading screen never opens the video. I have installed chromium-browser (+libv4l-rkmpp, +ffmpeg, +rockchip-multimedia-config) from the ppa: https://launchpad.net/~liujianfeng1994/+archive/ubuntu/rockchip-multimedia My OS version is Armbian 23.08 Jammy. When using FFplay the rkmpp hardware decoder is able to correctly decode h264 and hevc content, so there does not seem to be a problem with rkmpp. Any thoughts on what could be wrong? I found another guy who had the same issue, but there was no resolution: https://github.com/armbian/build/issues/5384 Faile…

I'd like to build a portable LimeSDR Transceiver. I would like to use a USBC 1080p IPS touchscreen. Has anyone had any experience with USBC touchscreens with the RK3399 SBC ?

Hello Folks, good day. I have a project where I need to use a OrangePi 4B and couple of hardware pieces connected to it. I'm having trouble putting together a Linux image where I have, at least the minimum functions required for the project working. I need an image where these items below are enable/working: - SPI - I2C - GPIO - PWM - 10.1 MIPI DSI LCD + TOUCH (available here) - MIPI CSI Webcam (OV13850) - 3D Acceleration (WebGL / OpenGl) using the Mali t860 - Bluetooth - Wifi Ideally, I would like to use the most recent Focal mainline kernel, but a legacy image will also be fine. I've b…

Hi, I had to change the Rack 1 HDD because I got an email telling me that this disk was broken. So I ordered new discs to make my replacement. When I put my new disk my problem started. For information my old disk was perfectly visible before I changed it and the led was functional too. I have a strange problem and I'm afraid it's hardware. Currently I have Rack 1 (HDD 1) which no longer detects my disks, there are no more LEDs lighting up, we can clearly hear the HDD lighting up, but it is not visible in the CLI and not via the WebUI. Im using OMV 6.x with kernel 5.15.89 (current) stable RAID 6 with 5 x 8To Have try…

So I got my Helios64 today, built it with 2 drives, a Adata SSD on the M.2 and 2 Seagates on SATA 1 and 2. But whenever I want to boot it up, the internal blue system LED lights up + System Rail power (UPS installed) with all activity LEDs and HDD error 3 instantly with no delay. There is no Console output and nothing is to be heard spinning up. When building I noticed the cable harness having the same length for connectors 2 and 3 where 3 is too short for zip tie-ing. Help is greatly appreciated.

Hello everybody, im experiencing a similar problem. Sometimes my WD RED 12 TB HDD is not recognized in that slot its in, when i change it to any other it works again. Nevertheless it seems this problem doesnt only apply to one specific slot, but is changing from time to time. EDIT: The LED of that slot doesnt turn on, yet the drive starts and runs Do anybody experience the same problem, or know any help? Thank you in advance. Best Regards.

Hi everyone, I have been playing a lot (too much maybe) with my NanoPi M4. It seems that most of what I need will be working "soon" (yay for hardware decoding), except HDMI audio bitstream passthrough. Whatever kernel I try, I always get this output from Kodi: Device 1 m_deviceName : default m_displayName : Default (hdmi-sound ff8a0000.i2s-i2s-hifi i2s-hifi-0) () m_displayNameExtra: m_deviceType : AE_DEVTYPE_PCM m_channels : FL, FR, LFE, UNKNOWN1, FC, BC, BL, BR, BLOC, BROC, FLOC, FROC m_sampleRates : 32000,44100,48000,88200,96000,176400,192000 m_d…

Have an OPi 4B with installed Armbian (Armbian_21.05.1_Orangepi4_buster_legacy_4.4.213_xfce_desktop.img from here) which is working perfectly. HUGE thanks for that. So i wanted to try images with mainline kernel and found that none of XFCE desktop images from the archive can correctly output HDMI signal for my screen, maximum i could achive was compressed and flickering image using method from docs (editing /etc/X11/xorg.conf.d/40-monitor.conf). by default there are no modes in /sys/class/drm/card0-HDMI-A-1/modes in mainline images and in legacy one there are two: 1280x800p60 and 1280x800p57. EDID is there in both images. And if i set resolution via /…

Good morning, I'm using RK3328 SOM-EVB by Olimex with Armbian 22.02.0-trunk with Linux 4.4.213-rockchip64. I'm using it with an HDMI LDC 7" capcaitive touchscreen by Waveshare (https://www.waveshare.com/product/displays/lcd-oled/lcd-oled-1/7inch-hdmi-lcd-h.htm). I can't rotate the LCD in portrait mode. In Application->Screen the "Rotation" section is "none" and there aren't any other choice (like left, right, inverted). If in command line I use: xrandr --output HDMI-1 --rotate left it gives me back: xrandr: output HDMI-1 cannot use rotation "left" reflection "none" Does anybody knows how to solve it and rotate the …

So I have two boards, and two images, both built with armbian-build. I built `current` on March 24th 2025 and HDMI and everything works great I built one this week and there is no HDMI output. Logs of the non-working one: Apr 07 18:36:09 radxa-zero3 kernel: mmc2: new UHS-I speed SDR104 SDIO card at address 390b Apr 07 18:36:09 radxa-zero3 kernel: rk808-rtc rk808-rtc.4.auto: registered as rtc0 Apr 07 18:36:09 radxa-zero3 kernel: rk808-rtc rk808-rtc.4.auto: setting system clock to 2017-08-05T09:00:10 UTC (1501923610) Apr 07 18:36:09 radxa-zero3 kernel: rockchip-vop2 fe040000.vop: Adding to iommu group 0 Apr 07 18:36:09 radxa-zero3 kernel: r…

I am using kernel 6.12.45 with rk3568 , everything is displayed on my monitor. A colleague's computer does not work on 3 of the 4 monitors. the error is the same as in the theme / kernel: rockchip-drm display-subsystem: [drm] Cannot find any crtc or sizes , since it seems that no one is watching that topic, I decided to raise this issue. Has anyone encountered such a problem?

I can't get HDMI output in RK3399 board Nano PC T4, what I have tried https://dl.armbian.com/nanopct4/Noble_current_gnome-kisak https://dl.armbian.com/nanopct4/Bookworm_current_minimal the SSH is working I can only get a black screen on HDMI Kernel 5.x (Armbian 22) works

Hello , i downloaded the latest Armbian Bionic for Rock64 (RK3288) but it would not boot with HDMI-to-VGA adapter. The same adapter boots happily if i use the Bionic Desktop image with Legacy Kernel 4.4 Do i need to add something to ArmbianEnv.txt? Thanks

Hi! I'm having trouble with hdmi display and armbian focal on rock64. All works with simple office hdmi displays but fails with an open frame display connected using hdmi->dvi cable. Even the boot messages do not display and the display goes into power saving mode. Here are some of the outputs: rock64@rock64:~$ cat /sys/class/drm/card0/card0-HDMI-A-1/status connected rock64@rock64:~$ cat /sys/class/drm/card0-HDMI-A-1/status connected rock64@rock64:~$ dmesg | grep hdmi [ 4.484419] dwhdmi-rockchip ff3c0000.hdmi: Detected HDMI TX controller v2.11a with HDCP (inno_dw_hdmi_phy2) [ 4.485826] dwhdmi-rockchip ff3c0000.hdmi: registe…

I had one OPi5 setup and working properly with one of my TVs. I was running Kodi and using the remote from my TV to control Kodi using HDMI-CEC. I went to setup a second one on another TV but this time the TV remote did not work properly. Through elimination I came to determine the HDMI cable was the issue. I ordered another HDMI cable that had the Ferrite at each side of the cable. Now it worked properly. Thought this might be useful for others. This is the cable I ordered: https://www.amazon.ca/dp/B003PDHJ6M Conclusion: In order to make HDMI-CEC work properly, make sure the HDMI cable is of sufficient quality. I think ones with the Ferrite may be b…

Can anyone confirm whether HDMI-CEC is working on the opi5pro? I got one recently and regardless of distro neither cec-utils or v4l-utils can see any devices. e.g. cec-ctl: > cec-ctl -S Driver Info: Driver Name : dwhdmi-rockchip Adapter Name : dw_hdmi_qp Capabilities : 0x0000000e Logical Addresses Transmit Passthrough Driver version : 6.1.75 Available Logical Addresses: 4 Connector Info : None Physical Address : f.f.f.f Logical Address Mask : 0x0000 CEC Version : 2.0 Vendor ID : 0x000c03 (HDMI) OSD Name …

Board: Orange Pi 5 Pro (RK3588S) OS: Armbian, kernel 6.1.115-vendor-rk35xx Display: Generic 7" HDMI panel, 1024x600 native (SKU MPI7002, "7inch HDMI Display-C") Symptom HDMI0 (the HDMI 2.1 port, using the new hdptx combo PHY via dwhdmi-rockchip) reliably fails to link-train at this panel's native timing (1024x600@59.82Hz, pixel clock 50.25MHz): dwhdmi-rockchip fde80000.hdmi: use tmds mode rockchip-vop2: Update mode to 1024x600p60 ... dclk: 50250000 rockchip-hdptx-phy-hdmi fed60000.hdmiphy: hdptx phy pll locked! rockchip-hdptx-phy-hdmi fed60000.hdmiphy: hdptx phy lane can't ready! phy phy-fed60000.hdmiphy.7: phy poweron faile…

Hello I have installed Armbian 24.2.3 Bookworm with Linux 5.10.160-legacy-rk35xx on Orange Pi 5 plus with 32 Gb ram and mounted a heatsink with a fan on the CPU (this model: http://www.orangepi.org/html/hardWare/computerAndMicrocontrollers/details/Cooling-Fan.html) I need help configuring the fan to turn on when the CPU temperature reaches 60°C and turn off when it reaches 50°C. Can you provide instructions on how to do this? Thanks for help or support

Hi, I installed Armbian Bookworm Minimal CLI on my Rock 5b and followed the instructions on this post to get the fan to work properly. Specifically, git clone https://github.com/lukaszsobala/fan-control-rock5b cd fan-control-rock5b make package sudo dpkg -i fan-control*.deb sudo systemctl enable fan-control systemctl start fan-control However, the software won't start. When trying to run it manually, I get, $ sudo /usr/sbin/fan-control pwmchip: 0 gpio: 0 pwm-period: 20000 temp-map: speed: 0, temp: 20, duty: 8400, duration: 10 speed: 1, temp: 50, duty: 9600, duration: 2 speed: 2, temp: 60, duty: 10800, duration: 2 speed: 3, temp: 70, …

I accidentally ripped off a capacitor from the back of the Helios64. This missing capacitor is right below the SATA connector. I searched for the schematic of the board without any success. Does anyone happen to know the value and size of this capacitor?

Hello My Helios64 arrived two weeks ago, after a loooong trip through the Silk Road all the way down to South Europe. First thing I want to give a GREAT THANK YOU to the people at kobol shop support, as they have helped me with my transport/forwarded/ carrier nightmare loop: the address is in Chinese-no address specified-contact the sender-won’t give you your parcel-please call again- no address specified.... So. After reading a good slice of the wiki I couldn’t find a comprehensive manual/article about the simplest usage of the front panel. Glad if you can point me to such information. The principal source of confusion for me are the comments section of …

With the recent update of the kernel "edge" package (6.8.11-edge-rockchip64) when the system boots. interfaces get different names (they used to be "end0" and "eth1" before, and now they are "eth0" and "eth1"), but more importantly, they both show different MAC address (the old address returns when previous kernel is booted). It took some time to figure why it did not appear on its prescribed address... Anyone notice this, or has a clue why? Armbian 24.5.5 noble Linux kobol 6.8.11-edge-rockchip64 #1 SMP PREEMPT Sat May 25 14:28:41 UTC 2024 aarch64 aarch64 aarch64 GNU/Linux

Hello everyone, I'm experiencing frequent network disconnections on my system running Armbian 24.5.3, both with Bookworm and Noble bases, which are both using Kernel 6.6.39. This issue becomes particularly frustrating when syncing files with Unison, as the interruptions disrupt the process frequently. To provide some background, I didn't encounter these network issues when I was using the last Focal version, which was running on Kernel 5.x. The current versions of Samba I'm using are 4.17.12-Debian on Bookworm and 4.19.5-Ubuntu on Noble. Unison is at version 2.52.1 on Bookworm and 2.53.3 on Noble. Both systems also have the latest updates for MDADM…

Quick preface: I'm a noob in many ways, though I'm trying to learn. I may make obvious mistakes and may need clearer instructions than most. Would really appreciate someone working with me here! So I realized earlier this year that I was still on Buster and that there were two newer OSs that I could upgrade to. I upgraded to Bullseye with support from ChatGPT which worked nicely. The upgrade to Bookworm hosed my system and it now fails to reboot. System Info (prior to failure): - Helios64 board - Armbian with OMV - Originally running Buster, then upgraded in sequence: first to Bullseye (worked fine), then to Bookworm - System was always boo…

A stable Armbian Bookworm configuration for your Helios64 is provided here (solved). ************************************************************************* Recently a new Armbian 23.08.1 Bookworm image with linux-6.1.50 was made available for Helios64 on its download page (see here) - which is as such great 😀. Everything starts up nicely, but unlike the previous Bookworm 23.05 image, the current one has an issue with accessing USB devices. In the boot process the following error occurs: # cat /var/log/syslog | grep error 2023-09-07T12:31:05.671598+02:00 helios64 kernel: [ 2.537009] dwc3 fe900000.usb: error -ETIMEDOUT: failed …

I tried to install OMV 7 RC1 on the Bookworm image, but I get a lot of "Segmentation fault" and "free(): invalid pointer" error messages. My Installation for the Bookworm image... Is the problem due to the Bookworm image or the 6.6.8 kernel or should I contact the OMV team? Here is the complete log of the OMV 7 RC1 installation... Spoiler root@helios64:~# sudo curl -sSL https://github.com/OpenMediaVault-Plugin-Developers/installScript/raw/master/install | sudo bash [2024-02-22 13:32:50+0100] [omvinstall] script version :: 2.3.9 [2024-02-22 13:32:50+0100] [omvinstall] Armbian [2024-02-22 13:32:50+0100] [omvinstall] Starti…

The most current download images for Helios64 are now all provided with linux 6.18.xx. I downloaded a minimal image and checked the dtb: it would not appear to contain the opp-microvolt patch that made Helios64 finally stable. So for the ones who have stability issues again on Helios64, I attached the patched dtb compiled for linux 6.18.xx using the exact same opp-microvolt values as in the previous dtb versions I compiled for linux 6.6 and 6.12. The current linux deb files can be downloaded from beta.armbian.com, the linux 6.18.18 deb files I used can be downloaded from here (to be installed with 'dpkg -i linux*'). In order to install …

Hello, Armbian 25.8.1 on Helios64 BookWorm with Linux 6.12.42-current-rockchip64. I have my system booting from SD with OMV7 installed and several docker containers running. Everything is OK. Now I want to boot from emmc. Used armbian-install selecting option boot from emmc - system on emmc. Formatting and copying goes Ok, but when I reboot from emmc (extracting th SD card), OMV7 presents the web frontend, but can't log in. journalctl reports errors accessing the drives, and looking on /etc/fstab, there's only the / partition mounted. Inserting and mounting the SD card in /mnt/sdcard I can see that in /mnt/sdcard/etc/fstab there's…

CURRENT branch (Linux Kernel 5.10) Feature Support Status Remarks Shutdown OK Reboot OK Suspend to RAM Not Supported USB host controller refuses to enter suspend mode 2.5G Ethernet (2.5G speed) OK TX offload disabled by default, can be enabled for better performance 2.5G Ethernet (1G speed) Performance issue Requires hardware fix. Main Power/UPS status OK …

As stated in my comments here (but it seems no one is reading this blog post comments anymore ...) : https://blog.kobol.io/2020/10/27/helios64-software-issue/ - With 5.8.17 i have kernel panics. - With 5.8.14 i have freeze. So what to do in order to have a stable situation ?! It seems to be "under load" (one freeze during RAID array being built, and several ones (with .14 or .17 kernels) while files were being copied through the 1Gb/s network interface). - System newly installed and running on fresh SSD card. - 5*3.5" WD HDD plugged in / RAID5 mdadm array (so no M.2, ...) - nothin…

) my Setup is : **Board**: Helios64 (RK3399) - **Kernel**: `6.18.44-current-rockchip64` - **Armbian**: 26.8.3 (upgraded from 25.11.2 via apt) - **Boot**: currently booting from SD card (rootfs on mmcblk0); b) symptoms : After upgrading to 26.8.3, my drives are no longer detected — but only on a "warm reboot": - ASM1061 PCIe-SATA controller (bays 1-2) completely missing from `lspci` - JMS561 USB-SATA bridges (bays 3-5) missing from `lsusb` - Other USB devices (VIA hubs, Realtek USB NIC) enumerate fine - No `sdX` block devices at all in `lsblk` The only fix is a "cold boot": `poweroff`, unplug the power cable, wait 1-2 minutes, power back …

Hello, I received recently an Helios64 from a new friend, However, when I get home, I plug it in, turn it on (already I have to press the power button for 4 seconds to get some life) and I get the following LEDs lit up: - LED1 - LED2 - LED3 - LED5 - LED6 i got nothing on the serial line (tested on MacOS and Windows), and no reaction when I do quick and long press on Recovery nor Reset. Is there some electronic schematic that could help me to debug hardware or procedure to get JTAG access to the RK3399 ? Regards,

Servus! I'm running an "old" Helios64, still with debian buster and kernel 5.9.14-rockchip64 ... pretty much the same installation, as I had setup the Helios64 years ago. So far it is running great, with no real issues. I have ZFS running on it, with 3 disks. Today I decided to upgrade to something new - and installed Armbian 25.5.1 / Nobel - with kernel "6.12.32-current-rockchip64". Helios64 boots up and everything seems to work fine. I was able to import my ZFS pool and it was accessible - however, when I do heavy i/o, e.g. md5sum on a big file, I get a lot of these errors: Jun 08 20:06:36 helios64 kernel: ata2.00: failed command: READ FPDMA QUEUED J…

Hi all, I am unable to login to OMV on my Helios64. A bit of sleuthing indicates that this is because the / fs is at 100% capacity. At first, I figured I'll just transfer the system install from the 8GB SD Card I started with to the 16GB internal eMMC. Turns out past unfnknblvbl already did that, and now I need to go the other way. The documentation on the old Kobol site isn't entirely accurate about how to do this. My SDCard is /dev/mmcblk1 and even though it's formatted ext4, it simply doesn't show in armbian-config. In fact, the only device that shows in the Install menu is /dev/md127, which is the RAID array itself. I'd rather not be booting f…

News related to Helios64 : Production Software update Wiki / Documentation update Etc...

Hello, I have a problem, when I enter "sudo apt install zfs-dkms" on my Helios64, I get this error message: "Module build for kernel 6.6.36-current-rockchip64 was skipped because the kernel headers for this kernel do not appear to be installed." I also made sure to install the kernel header in armbian-config and also rebooted. When I type "apt list --installed | grep linux-headers", I get this listing: WARNING: apt does not have a stable CLI interface. Use it with caution in scripts. linux-headers-current-rockchip64/bookworm,now 24.5.1 arm64 [installed] omv7 itself is installed and running. …

Hi, I use Helios64 from the begin and this board is very unstable according to my experience and many posts here... After many dialogue here and settings shared about Frequency and Governor Kernel... maybe i find the problem and i ask anyone return of experiences about the procedure and setting belong: - Connect USB Wireless Dongle or USB(-c) Ethernet Plug - Configure it - Disconnect all ethernet cable to the board - Use with last time crash configuration and do a endurance test your helios64 board Have a good day

Hi folks, I am wondering if somebody with a mac enviroment has a decent / performant samba connectivity? After I upgraded to Big Sur I have severe issues with the samba protocol when accessing my shares on the helios running openmediavault. I know that Apple had made some changes with samba but there might be some users that dug a little bit deeper and could give me a hint. I did try it with different settings in the extra options over the past weeks but with no luck so far. Sidenote: Also NFS is terribly slow and laggy. I am back with AFP connection now that does the job perfectly and fast.

Hi, Today i make upgrade to 23.11 armbian on my Helios64. It's in bookworm version (apt source list is good, no change since 23.08) but now it display this: Welcome to Armbian 23.11.1 Buster with Linux 6.1.63-current-rockchip64 No end-user support: community creations & unsupported (buster) userspace! it's a bug? thank have a nice day

Hello everybody, With 6.18.10-current-rockchip64 and rk3399-kobol-helios64.dtb-6.18.18-opp dtb file, Ok With 6.18.35-current-rockchip64 and overlay helios64 patch with armbian-config, Ko With 6.18.35-current-rockchip64 and k3399-kobol-helios64.dtb-6.18.18-opp dtb file, Ko The crash is random... sometime crash: - At the boot with red system light blinking - At the opening of my LUKS ciffers drives - At a high cpu load - With nothing special, all led are blue, system blinking but network and ssh is Ko Is it possible to explain me how to see the problem or how to have log because I am in blind to have more de…

Hi, Today i upgrade to 24.5.3 when apt full-upgrade proposed me to upgrade and return of crash 😞 Tuned rk3399-kobol-helios64.dtb L2 hs400 file seen to be update... i copy paste file used with 6.6.32... I replace rk3399-kobol-helios64.dtb.org (with 24.5.3) with my rk3399-kobol-helios64.dtb post in this forum sha256sum: e90ebceb4b2f213818f320dfc61c90e556e0470702afa4117b0302bffc3d2cce rk3399-kobol-helios64.dtb sha256sum: 0eb03b645ab8125a4460d4509df32050188a8bdf2b5065f4321748b4eb6f6b4d rk3399-kobol-helios64.dtb.org It's seem to be not crash now... Keep in touch. UPDATE: i confirm, after update to 24.5.3…

Hi folks, long time lurker here. My helios64 is pretty much brand new, didn’t really needed it at that time, only bought it as I found it really cool. I may power it a couple of times per year for some backups (got 3x 6tb in it, no raid so I can take them out when needed, also back up stuff to external drives), it still starts-up from the initial sd card as I never finished setting it up. I also have a 1 bay separate NAS for downloading movies that if fails, I will just replace; and a drive attached directly to my router for easy file swaps; so don’t need much running 24x7. While I work in IT (on the Windows side, so the Armbian stuff is still a le…

I have the Helios64 NAS and am now at the point where I'll either get it working or toss it out and get something else.... it boots and runs and stops most of the time let's get some of the basics out of the way so we can figure out if here is the "best" spot to get help... uname -a returns root@helios64:/home/rmleonard# uname -a Linux helios64 5.10.21-rockchip64 #21.02.3 SMP PREEMPT Mon Mar 8 01:05:08 UTC 2021 aarch64 GNU/Linux cat /etc/os-release root@helios64:/home/rmleonard# cat /etc/os-release PRETTY_NAME="Debian GNU/Linux 10 (buster)" NAME="Debian GNU/Linux" VERSION_ID="10" VERSION="10 (buster)" VERSI…

[ 184.130515] Internal error: Oops - Undefined instruction: 0000000002000000 [#1] PREEMPT SMP [ 184.131281] Modules linked in: rfkill lz4hc lz4 snd_soc_hdmi_codec snd_soc_rockchip_i2s rockchip_vdec(C) hantro_vpu v4l2_vp9 leds_pwm gpio_charger videobuf2_dma_contig pwm_fan rockchip_rga panfrost videobuf2_dma_sg v4l2_h264 gpu_sched v4l2_mem2mem snd_soc_core drm_shmem_helper snd_compress rockchip_rng rng_core snd_pcm_dmaengine videobuf2_memops snd_pcm videobuf2_v4l2 videobuf2_common snd_timer videodev snd soundcore mc zram binfmt_misc gpio_beeper cpufreq_dt ledtrig_netdev lm75 dm_mod ip_tables x_tables autofs4 raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor…

Dear to all, I'm new on linux environment so be patience with me. I have a helios64 unit with installed Openmediavault 6. When I reboot or turn-off helios64 (both from webgui interface that from power button) the hard disk ( 2 wd60efrx) make a cute sound from head. How can I check that heads are parked correctly? I don't want damage my hard disks Best regards