Rockchip

As title says. Here's the bash script I use to download the dependencies and compile the latest mesa: https://pastebin.com/1n7Sv0dZ How /boot/*Env* looks like right now: https://pastebin.com/mUqHs14Y And the error message I get when I try to run sway goes as follows: MESA: error: ZINK: failed to choose pdev libEGL warning: egl: failed to create dri2 screen [wlr] [EGL] command: eglInitialize, error: EGL_NOT_INITIALIZED (0x3001), message: "DRI2: failed to create screen" MESA: error: ZINK: failed to choose pdev libEGL warning: egl: failed to create dri2 screen [wlr] [EGL] command: eglInitialize, error: EGL_NOT_INITIA…

Hello, i want use and control kodi on my Helios64 with the tv remote. Have someone experiance with that and a recommendation for cables or usb c dockingstation? thank you

Running latest Jammy image and trying to attach USB to SATA 3 SSD. I tried two different USB 3 to SATA adapters and they both show up in lsusb: Bus 005 Device 002: ID 2109:0711 VIA Labs, Inc. VL711 SATA 6Gb/s bridge sudo fdisk -l doesn't show drive, but I can plug into my desktop and it mounts disk. Could be related to https://github.com/MichaIng/DietPi/issues/5378

Picked up a P1 Pro the other day. Used the P1 installer, and it boots fine. However WiFi and m.2 dont work ( no m.2 makes it useless for me.. WiFi, i can use a dongle ) so i assume the device tree needs changed. Still a newbie at this, so unsure how i can find or extract the tree from somewhere else. They do have a couple of official builds of other OS, but not real sure how to get it from there, if you even can. Lots of googling for a tree has come up empty.

When I boot any variant with kernel 6..x.x from SD there is no problem with hdmi. When I flash the same variant to the nvme, it boots fine but there is no hdmi output. The orange pi logo appears for a second, then nothing. I can ssh in and everthing works fine. Any variant with 5.x.x kernel works fine from the nvme, with hdmi output. What I don't understand is that if I have output to hdmi when booting from sd, why not from nvme. What I think is relevent entries in the boot log is below. mmu fe043e00.iommu: Enable stall request timed out, status: 0x00030b Jan 30 09:38:22 orangepi3b kernel: rk_iommu fe043e00.iommu: Enable stall reques…

Hello, I am trying to enable Panfrost GPU acceleration on a new Armsom Sige5 board running the latest edge kernel (6.1.115), but glxinfo -B still shows llvmpipe. I have been troubleshooting this for some time and have discovered that the kernel module (panfrost.ko) loads correctly with modprobe, but it is not binding to the GPU hardware on boot. I believe I have found the reason why. A recent commit to the Armbian build system (https://github.com/armbian/build/commit/836def3d11699537e6289dedfbc766c2050d422d) changes the method for enabling Panfrost. It removes the panfrost overlay and adds KERNEL_TARGET_CONFIG="panfrost-all" instead. It…

Hello all, After some time without touching it, I came back to my Rockpi 4B. I installed the latest armbian bionic image on a samsung 64Go card. All seems to work fine for the first boot. But when I try to restart the system I don't get any display on screen. To get it back I need to unplug HDMI plug and re-plug it. Didn't found any conversation about that trouble? Is it a bug or is there something I can do to fix it ? Thanks for your answers. Pat

Hello, How can I get a effective shutdown with the battery with legacy 4.4 (it always restarts) (2.5 Gbps OK) or How can the 2,5 Gbps performance issue be solved in 5.8 ? (that can shutdown OK) Which one is the easiest to address and solve for a beginner like me using OMV? Thank You! David

I saw some initial work on supporting uugear's vivid unit (rk3399 based). I was wondering in what state that is, what is required to complete that work and if there are plans to add that support to the mainline? Thanks in advance, Markus

Hi all, any recommendations for a ~ 5" monitor for the M4 ?

Hi, Around the forums, I've seen that some people have been successful in running the lima driver on Amlogic or Allwinner hardware: https://forum.armbian.com/topic/14180-bananapro-lima-driver-problems/ https://forum.armbian.com/topic/11424-playing-with-limamesa-mali-drivers/ However, I couldn't seem to find any posts with Rockchip hardware, specifically the ROCK64. I tried to enable it myself by doing the following, but was unsuccessful so far. enable kernel module lima via "sudo modprobe lima" update /etc/X11/xorg.conf.d/01-armbian-defaults.conf as below per the lima wiki instructions (also tried w/o the "Device" secti…

I've been trying to get OMV setup on the Helios prior to adding my hard drives and I keep getting errors and communication failures when I try to do pretty much anything. I like OMV for it's GUI, but honestly, I've never been a fan of it functionally. Is there anything comparable to it that works with the Helios64? Anyone have any suggestions how to fix it? I have logs but I don't see a place to attach them.

I've been trying to connect a USB hdd for a while now, and depending on the SATA disk and the USB<->Sata adapter I've had different behaviours : * 700mA hdd * Adapter A works, can mount and copy * Adapter B is detected, the SATA device too in dmesg, but does not appear in lsblk. * 1A hdd (Seagate Barracuda 2To 2.5'') * Adapter A seems to be detected, the disk tries to start (sde is showing in dmesg) but usb device disappears, reappears etc ("usb disk bootloop") * Adapter B is not even detected in dmesg or lsusb ! Obviously, the 4 configurations perfectly work on a x86 host. What could be going on ? I'm pr…

I am trying to get a camera going on the Nanopi-m4 (I have tried another board as well with similar results). The sensor is setup in the device tree correctly and gets probed on boot. However there are some issues when loading rkisp1. [ 5.645127] rkisp1 ff920000.isp1: Adding to iommu group 5 [ 5.645695] rkisp1 ff920000.isp1: Failed to get clk 'clk_isp': -2 [ 5.645814] rkisp1: probe of ff920000.isp1 failed with error -2 My understanding with Failed to get is because it is either being used by another resource or was not defined correctly. Below are my entries in the device tree for the isp. I am using `isp1` in this case, I am assuming as wel…

Hi, I own a nanopi m4 v1, I know there is no more armbian support neither maintainer for this board but I still enjoy "the other supported variants" which work very good for my needs. Until now, I only used armbian on sdcards for my system, but today I tried to install it of my emmc module. Maybe I did somethig stupid, I tried to install the bullseye current cli version from https://www.armbian.com/nanopi-m4/ on my emmc module via armbian-install. So all process of installation was ok (boot on sdcard then armbian-install => erase / format / install on emmc ...), I choose to boot from emmc too (maybe it was a mistake). => After …

hello guys, i hawe question, my device: orangepi 3b 8gb OS: 1.0.6 Jammy with Linux 5.10.160-rockchip-rk356x 3.3V → 3.3V → PIN 1 GND → GND → PIN 6 SCK → SPI SCK → PIN 23 MOSI → SPI MOSI → PIN 19 MISO → SPI MISO → PIN 21 SDA → CS → SPI CE0 → PIN 24 =========================== /boot/orangepiEnv.txt ``` verbosity=1 bootlogo=true extraargs=cma=128M overlay_prefix=rk356x rootdev=UUID=4b3309b6-9bbe-431d-8609-82360b5b6154 rootfstype=ext4 overlays=spi3-m0-cs0-spidev spi3-m0-cs1-spidev ``` orangepi@orangepi3b:~$ ls /dev/spidev* /dev/spidev3.0 …

Will there be support for the RK3399PRO processor? e.g. for a Rocki pi N10 SBC?

after several minutes, a 3 line error message is output on 2 old original rock64's. network works, I can log in from my local net, and dmesg says: [ 35.867400] Unbalanced IRQ 47 wake disable [ 35.867422] WARNING: CPU: 0 PID: 1580 at kernel/irq/manage.c:900 irq_set_irq_wake+0x108/0x148 [ 35.867447] Modules linked in: rfkill joydev snd_soc_spdif_tx gpio_ir_recv rc_core lz4hc cdc_acm lz4 hantro_vpu(C) rockchip_vdec(C) rockchip_iep snd_soc_simple_card v4l2_h264 snd_soc_rockchip_i2s rockchip_rga videobuf2_dma_contig snd_soc_rockchip_pcm snd_soc_hdmi_codec snd_soc_rk3328 snd_soc_simple_card_utils v4l2_mem2mem snd_soc_rockchip_spdif videobuf2_dma_sg videobuf2_vmal…

Hi, i just want to inform that onboard wifi (AP6275P) on Orange Pi 5b doesn't support at this moment. Is there any plan to support it in the future?

The mainline 5.11 patch "phy: rockchip: set pulldown for strobe line in dts" https://github.com/torvalds/linux/commit/8b5c2b45b8f0a11c9072da0f7baf9ee986d3151e (not backported to 5.10.y) seems to have broken most if not all rockchip board EMMC HS400 enhanced strobe support. This probably affects supported rockchip boards (at least rk3399 ones, but probably most). That is boards exhibit: [ 18.985162] mmc1: running CQE recovery [ 18.988056] ------------[ cut here ]------------ [ 18.988500] mmc1: cqhci: spurious TCN for tag 12 and the filesystem ends up corrupted on write attempt. Note that another bug about regulator core DEFER…

Hello everyone, I'm experiencing frequent network disconnections on my system running Armbian 24.5.3, both with Bookworm and Noble bases, which are both using Kernel 6.6.39. This issue becomes particularly frustrating when syncing files with Unison, as the interruptions disrupt the process frequently. To provide some background, I didn't encounter these network issues when I was using the last Focal version, which was running on Kernel 5.x. The current versions of Samba I'm using are 4.17.12-Debian on Bookworm and 4.19.5-Ubuntu on Noble. Unison is at version 2.52.1 on Bookworm and 2.53.3 on Noble. Both systems also have the latest updates for MDADM…

Hi, I tried to install WireGuard, but it resulted in a non-bootable-system Wasn't WireGuard integrated in the kernel ? How does this apply to Armbian ? Available rk3588 kernels: $ sudo apt search linux-image.*rk3588 Sorting... Done Full Text Search... Done linux-image-current-rockchip-rk3588/bookworm,now 24.11.0-trunk.152 arm64 [installed] Armbian Linux current kernel image 6.10.11-current-rockchip-rk3588 linux-image-edge-rockchip-rk3588/bookworm 24.11.0-trunk.152 arm64 Armbian Linux edge kernel image 6.11.0-edge-rockchip-rk3588 $ Apt tries to install this kernel: $ sudo apt install wireguard wireguard-…

Title. I've tried installing libgl1-mesa-dri but support feels really broken (Brave crashing frequently, mismatching opengl version, etc.). Am I missing something? Thanks in advance.

Has anyone been able to get both of the HDMI output to work with newer kernels than 6.1.115? I have my TV connected to the second output and it works with the vendor kernel but not with 6.18.x. There's no output at all.

Hi, I'm currently working to enable SPI on NanoPi M4 but it is not working... I have edited main DT to the following one and now /dev/spidev0.0 appears. But when I checked spi with this tool:https://github.com/torvalds/linux/blob/master/tools/spi/spidev_test.c I only got the result below and no matrix appears... spi mode: 0x0 bits per word: 8 max speed: 500000 Hz (500 KHz) Here is what dmesg | grep spi returns I have checked the output from the proper GPIO with oscilloscope but found nothing. almost spent couple weeks on this Anyone had the same issue or knows what to do here?

I have an Orange Pi 4B. The board as the only USB 3.0 port has the USB-C type. I connect the USB-C x USB-A adapter. I connect the USB flash drive and it doesn't work. Power from the port is coming out properly. Is there any chance that this port will work properly with an external drive?

Had my Helios up and running for a few months now running off SD card, but there was a message (can't remember where) to not make the install you 'final' setup as things were still in development. I've been keeping track of the 'what works and doesn't' , but as there are no updates in 6 weeks, is the general consensus that we've reached stability and its time to transfer to the eMMC?

Hello, with the last kernel update I have untimely reboot of my nas. some info : hardware : helios64 os : armbian bullseye based with openmediavault 6 on top kernel : armbian-bsp-cli-helios64-current:arm64 23.8.1 before the update to armbian-bsp-cli 23.8.1 the system have some unexpected restarts, but less than 1 by day. With last version, the system restarts itself sometime only few minutes after the start. With a debug console, I got the following kernel panic : [ 510.791607] Internal error: Oops: 0000000096000044 [#1] PREEMPT SMP [ 510.792174] Modules linked in: xt_nat xt_tcpudp veth xt_conntrack nft_chain_nat xt_MASQUE…

Hi, Thank you very much for the community support of Odroid M2. The latest release 25.5.0-trunk.256 works great, boot without any error messages. Only rolling release is available for now, but that doesn't matter. I would just like to ask for support on two issues: 1. monitor connection via USB-DP is not working - I don't know what is needed to make this connection work 2. some tree-overlay drivers specific to Odroid are missing - I mainly miss the ability to connect display-Vu8S (via MIPI-DSIdisplay_vu8s.dts). Source codes can be obtained directly from kardkernel images, but it is not in my power to compile them for armbian. best rega…

I'm using Rock64 image with my V88 Piano RK3328 box and when trying to build ZFS (SPL), it gives me an error. It's probably due to the maching kernel headers for running kernel is missing. When i run apt-get install kernel-headers-generic it installs 4.4.116 headers and not 4.4.77 kernel i'm running. How can i get the correct kernel headers? Thanks.

Hi, my rock64 (rev2) with the latest build of Armbian randomly looses its network connection. I couldn't use the armbianmonitor -u as it had no network connection, but when i use ifconfig, I can see it's still got it's settings and is the NIC lights are on. ifconfig showed 6 TX errors. My NIC is set to DHCP with static reserved IP address to an ASUS router. I leave it on 24/7 and check it once a while as it pretty much is used as a NAS with a single USB 3 drive. This morning I connected up via HDMI and a USB keyboard and logged in successfully. I don't have much Linux experience so wasn't sure how to capture the logs to SD card so i could co…

I just bought a FriendlyElec NanoPi Neo4 having had loads of experience with Armbian on Allwinner (OrangePi) boards. My preferred method for getting boards "up and running" is simply to connect a serial terminal to the debug port and power on. I tried this with several Armbian Buster images and found that I couldn't log in as root on any of them. Checking the SD card on my laptop, the debug port (ttyFIQ0) was missing from /etc/securetty. Editing /etc/securetty and adding ttyFIQ0 on a new line at the bottom of the file and all is well and I now have Buster up and running on the Neo4 :-) root@nanopineo4:/etc# diff securetty~ s…

Hi everyone, I have been playing a lot (too much maybe) with my NanoPi M4. It seems that most of what I need will be working "soon" (yay for hardware decoding), except HDMI audio bitstream passthrough. Whatever kernel I try, I always get this output from Kodi: Device 1 m_deviceName : default m_displayName : Default (hdmi-sound ff8a0000.i2s-i2s-hifi i2s-hifi-0) () m_displayNameExtra: m_deviceType : AE_DEVTYPE_PCM m_channels : FL, FR, LFE, UNKNOWN1, FC, BC, BL, BR, BLOC, BROC, FLOC, FROC m_sampleRates : 32000,44100,48000,88200,96000,176400,192000 m_d…

Hello everyone, I'm running the image from NanoPi R2S on a NanoPi R2C Plus (that has 8 GB eMMC). Is well working, but I would like to install the OS on the eMMC. Is it possible? Thanks.

Hello, I tried to install Armbian on my NanoPC T6, but when I boot it and look at the dmesg, I see some errors related to the emmc module. The emmc module is not the problem; I have tried different operating systems, and I don't encounter these issues. Here are the logs: https://paste.superkali.me/dajiqaloxa.yaml Thank you in advance.

I changed this in the dt and got more than double the speeds from my Samsung U3 SD card: However I have no idea what the process of getting this into the kernel source looks like. --- rk3399-rock-pi-4b.dts 2023-10-04 15:36:05.031221270 +0200 +++ rk3399-rock-pi-4b-mod.dts 2023-10-04 00:34:15.773888431 +0200 @@ -342,6 +342,7 @@ disable-wp; pinctrl-names = "default"; pinctrl-0 = <0x26 0x27 0x28 0x29>; + sd-uhs-sdr104; phandle = <0xce>; };

Hi, I've built the Ubuntu 18.04 image with legacy kernel (4.4) and tried to install wireguard. The problem was the kernel module which seems to be build by dkms. I've installed kernel headers from the linux-headers-rk3328_5.44_arm64.deb (built by armbian's build procedure) and tried to install wireguard-dkms package. It fails: Unpacking wireguard-dkms (0.0.20180513-wg1~bionic) over (0.0.20180513-wg1~bionic) ... Setting up wireguard-dkms (0.0.20180513-wg1~bionic) ... Loading new wireguard-0.0.20180513 DKMS files... Building for 4.4.131-rk3328 Building initial module for 4.4.131-rk3328 Error! Bad return status for module build on kernel: 4.4.1…

Hi all, I'm a bit out of date with regards to a working image for the NanoPi M4 v2 board. I have @pask image which works great but having to boot from the sd card and flash a bootloader patch to eMMC card whenever you reinstall ( I constantly break installs by over experimenting with stuff I don't know enough about ) is a bit of a pain. Anyone know of an image I can just download and flash ?

For anyone looking to build an iSCSI target on their new Helios64, I can confirm that it's working correctly under the test builds for Armbian 20.11. Thanks to @aprayoga for his comment on the pull request, the kernels modules related to LinuxIO have been added to all boards in the Armbian project.

Hello I was finishing setting up my Helios64 (system installed on emmc) with Openmediavault (luks + snapraid + mergerfs + samba) on 3 disks, everything was working and I thought I should reboot to make sure that it is indeed the case (especially making sure that luks locked disks would not be an issue). An what a surprise, after booting up I couldn't ssh in so I connect the serial to log in as root. It seems that all services are dead like below. # service ssh status ● ssh.service - OpenBSD Secure Shell server Loaded: loaded (/lib/systemd/system/ssh.service; enabled; vendor preset: enab Active: inactive (dead) Docs: man:sshd(8) man:sshd_co…

Hi, Using the image Armbian_23.5.0-trunk.181_Rock-5b_lunar_edge_6.3.1.img I get this error at boot: Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. Begin: Running /scripts/local-premount ... Scanning for Btrfs filesystems done. Begin: Waiting for root file system ... Begin: Running /scripts/local-block ... done. done. Gave up waiting for root file system device. Common problems: - Boot args (cat /proc/cmdline) - Check rootdelay= (did the system wait long enough?) - Missing modules (cat /proc/modules; ls /dev) ALERT! UUID=6a70cc68-5120-4343-887c-ca90fd2188f9 does not exist. Dropping to a shell! The SD card is wo…

Hello all I have broken my installation when I tried to install the kernel 6.1 my current kernel 5.10.160-legacy-rk35xx. My nanopc t6 do not start. My installation is on EMMC and start on it. Could you please help me to recover it ? I have a backup file from OMV but I don't know how to push the backup to the EMMC? other possibility I guess copy the boot folder backup to EMMC boot folder but I do not know if it is enough. I really appreciate an help furthermore a clear turial could help evryone to recover an installation on EMMC memory. Thanks in advance for your support.

Hello fellow geeks/nerds, Here still using a Rock Pi 4c on 26.2.0-trunk.44. After upgrading to 26.2.0-trunk.62 the Rockpi just does not come back. No display no network. Wish I could provide more details beside the versions. I've went ahead and froze the kernel updates. If there's a way to maybe pull a log of sorts please let me know and I'll post it.

Become a sponsor, help to add other boards in armbian standart, you don't need to be a programmer to help the community, just need a copy of the ARM BOARD and a x86 computer to compile new versions. If you like what you see here and want to help: Donate Armbian the like button only costs a few dollars. Here will be published all the tweaks for the Embedfire RK3576 board to enter the mainline with armbian. MiniLoaderAll.bin https://drive.google.com/file/d/15q19LOv_XuXbvwdlVjEWuhQtNEceOXwc Documentation: https://doc.embedfire.com/linux/rk3576/quick_start/zh/latest/index.html Unnoficial Firmware: https://drive.google.com/file/d/…

Few days ago i saw an issue after i added rule to auto-reboot device once a day, every time it's reboot it's losses connection with sata hat - no more sata controler after typing "lspci" and some nasty output after "dmesg | grep pcie". I tried reboot manually, when i reboot just after powering on (like up to 2 min), pcie goes back up and there is no issue, but if device stay on for longer and i reboot it then there is pcie training issue and mervell sata controller don't get recognized anymore, further rebooting don't fix the problem, i even tried to connect drives power straight through SATA Hat, but it had changed nothing. The only fix is to shutdown device instead …

Hi together, iam realy desperate and hope someone can help me with my problem. I think something crashed while I disconnected the USB-Cable in U-Boot Mode with helios64. Now Iam not able to see my m.2 SATA SSD in U-Boot Mode as USB Storage in my PC. I use the U-Boot mode from a SD-Card with a boot image. When I start some armbian System from SD-Card the m.2 SSD is visible and ready to use. I dont know what kind of logs do you need for my Problem. Sorry for that. :-( The only thing I want to do is to use my SATA m.2 SSD as armbian system drive with OpenMediaVault again. best regards sommer11 Infos to my device: https:…

@Contributor/Maintainer AR-1172 - fix complete 08 May 2022 There is was a bug in the 5.15, 5.16 and 5.17 kernel r8152 driver that affected RTL8153b Gigabit USB Ethernet (LAN0) on the Orange Pi R1plus LTS and other boards. The bug only presents on high load and I can trigger it reliably with bidirectional high load on Orange Pi R1plus LTS. The bug kills the RX interface and it requires power down to reset. I assume that it also affects the Orange Pi R1plus, and there are reports of it affecting NanoPi R2S. I would assume that other boards could be impacted. My proposed fix is to revert the driver back to the version used in 5.10 kernel (and to disa…

NanoPi-M4 will be cheaper and same form factor as RPI 3.

I'm about to install active cooling fan on my recently delivered nanoPI T4. However, I cannot get what is a type of the soldered 3-pin fan connector on this board? What I see there is visually too small as for standard connector size. Is it something special I have no clue about yet, or it is for future proprietary Friendlyarm's fan designed specially for the board? Any suggestions are welcome! Thanks

Hi everyone, I'm trying to get 4k output from my NanoPi M4. I have tried (using a Steamlink HDMI cable) directly connected to my TV (to eliminate my receiver as a point of failure/bugs) to get something to output to the screen in 4k. I haven't succeeded. What information I've gathered so far: There are two "vops" a big and little, and the little one is not designed to, and cannot output 4k (there was a patch hacking that into vopl but I never dared test it and can't find it now). There was this change setting the maximum resolution to 4k in a file/subdirectory I cannot find in recent kernels anymore: https://patchwork.ozlabs.org…

Hi, I have major issues with my helios64 / ZFS setup - maybe anyone can give me a good hint. I'm running the following system: Linux helios64 5.9.14-rockchip64 #20.11.4 SMP PREEMPT Tue Dec 15 08:52:20 CET 2020 aarch64 GNU/Linux I have a three WD 4TB Plus disk - on each disk is encrypted with luks. The three encrypted disks are bundled into a raidz1 zpool "archive" using zfs. Basically this setup works pretty good, but with rather high disc usage, e.g. during a scrub, the whole pool degrades due to read / crc errors. As example: zpool status -x pool: archive state: DEGRADED status: One or more devices are faulted in response to persisten…

Checked latest armbian buster and focal. In both disks, connected to second USB (not the middle one) not recognized (nor fdisk -l, nor dmesg). In friendlywrt both USB ports work as expected. Hirsute 10.4.21 also fine.

I have installed Armbian_24.5.1_Orangepi5_noble_vendor_6.1.43_gnome-oibaf_desktop.img on orangepi 5 pro. I found that it cannot recognize the m.2 SATA disk. Is there any solution to this? thanks very much.

Hello......could anybody tell me at least which image i have to use if i want to build armbian for the FriendlyArm NanoPC-T4? Couldnt find anything...... Thanks

I have a Rock64 powered by Armbian version 5.60 kernel 4.4.162-rockchip64 Ubuntu Bionic How can I activate i2c0 and i2s0 ports for connecting a 16x2 characters LCD display like 1602LCD and a PCM5102 DAC ? I'm trying armbian-config and I'm reading https://docs.armbian.com/User-Guide_Allwinner_overlays/ but I'm getting no help. Thanks for advance.

Still experiencing random kernel panic with latest build. Sometimes it boots, sometimes it doesn't , when operating from a remote location this is very frustrating. Spoiler DDR Version 1.24 20191016 In channel 0 CS = 0 MR0=0x18 MR4=0x1 MR5=0x1 MR8=0x10 MR12=0x72 MR14=0x72 MR18=0x0 MR19=0x0 MR24=0x8 MR25=0x0 channel 1 CS = 0 MR0=0x18 MR4=0x1 MR5=0x1 MR8=0x10 MR12=0x72 MR14=0x72 MR18=0x0 MR19=0x0 MR24=0x8 MR25=0x0 channel 0 training pass! channel 1 training pass! change freq to 416MHz 0,1 Channel 0: LPDDR4,416MHz Bus Width=32 Col=10 Bank=8 Row=16 CS=1 Die Bus-Width=16 Size=2048MB Channel 1: LPDDR4,416MHz Bus Width=32 Col=10 Bank=8 Row=16 CS=1 Die Bus…

I got the Helios64 and was running it from an external SD card so far since when I first installed it, the other options where not available, yet. I'm running openmediavault 5.5 (Armbian 20.11.6 Buster with Linux 5.9.14-rockchip64). Now, I wanted to move the system to a SSD and installed a "Crucial MX500 1TB CT1000MX500SSD4" according to https://wiki.kobol.io/helios64/m2/ Unfortunately, the SSD is not detected by the system, see output of dmesg below. For ata1, it only shows SATA link down. Is there anything I can do to figure out what the problem is? Or is there any reason why this particular SSD would not work? ~$ dmesg | grep ata [ 0.000000] M…

Hi guys, I have been using my Helios64 for more than a year now. I have it connected with the 1Gbps NIC. I have been reading about network bonding and getting both NICs up and running. The main purpose would be to have it running in mode "Adaptive Transmit Load Balancing" (mode 5). First I've discovered the issue with the 2.5Gbps not being able to keep a consistent (and performant) speed. So I've soldered the missing pin from the capacitor to the NIC (more on this later). I've checked the speed and now it is up to specs, getting very close to 1000Mbps (960-980Mbps). But here it comes the problem that I'm facing, if I enable both independently …

my rock64 sometimes hangs with unknow reason. Enabling/testing watchdog did not help. Does hardware watchdog is working at all ? some outputs: # dmesg | grep -i watchd [ 0.838922] dw_wdt ff1a0000.watchdog: No valid TOPs array specified [ 0.928770] rk_gmac-dwmac ff540000.ethernet: Enable RX Mitigation via HW Watchdog Timer [ 3.920201] systemd[1]: Using hardware watchdog 'Synopsys DesignWare Watchdog', version 0, device /dev/watchdog0 [ 3.921218] systemd[1]: Watchdog running with a hardware timeout of 28s. # wdctl Device: /dev/watchdog0 Identity: Synopsys DesignWare Watchdog [version 0] Timeout: 28 seconds Timeleft: 18 seconds Pre…

Hi all, thanks to you guys on here I now have a fully functioning 4 * SSD drive NanoPiM4 using the SATA hat. What I'd like to do now, is, place the drives in some sort of drive enclosure that would have 4 SATA data inputs and be powered by the molex on the hat. Is it possible and is there such an animal ?

Hi guys, I recently bought a Rock PI 4 and installed Armbian Buster with kernel 5.4.6. The os is booting fine but I am facing major performance issues when trying to download from the internet. I have also a Raspberry Pi 4 connected to the same switch (via LAN) and when I execute the following command curl -L http://speedtest.belwue.net/1G > /dev/null I am getting download speed of approx 8MB/s on my Raspberry but only 2MB/s on my Rock PI 4. From connection side and rooting there is no difference. While using the same Armbian version on my Rock64 I am getting the same speed as my Raspberry Pi. Is this a known problem with the Rock PI…

Hi, I think I may have posted about this in a few places, but I'm not sure where most are looking to discuss helios64 issues. The problem I am having is that the fans do not turn at all. As per the wiki, I've tried setting fancontrol off, and checking that the pwm value goes to 255, which it does but still no movement. I am using the fans supplied in the kit. There is nothing obstructing the fans, and sometimes if I disconnect and reconnect them from the board they will twitch a bit, or spin for a short while (until the connector is fully down against the board), but nothing otherwise. I've also tried heating the cpu up to ~85C (e.g `cat /dev/rando…

NVMe hard disk is not recognized anymore after last firmware/image update. localhost kernel: rockchip-pcie f8000000.pcie: PCIe link training gen1 timeout! localhost kernel: rockchip-pcie: probe of f8000000.pcie failed with error -110

Hi, I'd like to control ws2812 led's via gpio spi. I'm using this octoprint build by ldiaz: I checked /boot/armbianEnv.txt and there's overlay_prefix=rock64 and after enabling spi via armbian-config also overlays=spi-spidev. Then I rebooted but ls /dev/spi* shows nothing. Can anyone help?

I think I found a regression: It seems the USB 3.0 port is not working with kernel 5.10.160. It was working with kernel 5.10.110. So I have two questions: 1. How do I file a bug-report ? 2. Linux 6.3 officially supports the rockchip-rk3588 (6.4 is out). When can we expect a kernel update and which kernel version would that be? Thank you

Good morning, I am an electronics engineer, and wanted to make an additional card for the nanopi neo3 based on the rk3328 to add an EMMC and an SPI memory to it so that it no longer uses an sd card. By dint of searching the forum, I managed to modify the dtb files of the neo3 to include the spi@ff190000 of my neo3 and to make the dtbo files spidev and jedec. But unfortunately, armbian-config cannot finish the job. For information I use a N25Q064..3E (flashroom information with active spidev) and goes back well in /dev/mtd0 in jedec. but in my armbian i have no file /usr/lib/uboot***spl.bin. Maybe the problem …

Hi, could we add tag and section for Orange Pi 5 Max? I looked at the forum and couldnt find it here.

As the other thread is getting a bit cluttered I thought I'd start a new one. Thanks to the good work of @pask and others we now have a working image for the M4 v2. However, despite following instructions to the letter. I can't get the board to boot from the eMMC card, in fact I don't think the board even recognizes the card ( I've tried different ones ) Also not being able to connect via a serial cable is hampering my attempts at debugging the boot process. Cany anyone put up a Muppets guide on the steps required to achieve this ?

Hi just a quick question What package is dt-bindings normally located in, i would assume kernel headers but i tried installation via armbian-config and couldn't see them. Can anyone confirm what package it normally is in or was i blind thanks. Was just working on adding support Waveshare Dual RS232 on SPI2, uploaded DTS to https://github.com/radxa/overlays/blob/main/arch/arm64/boot/dts/rockchip/overlays/rk3399-spi2-sc16is752.dts Atm i hardcoded the defines on machine but not ideal if it changes in the future Thanks

Hi, Currently working on building the kernel modules for tinkerboard-2. But wonder how to deploy my local build (kernel, device tree and full kernel modules) to my boards without re-flashing the SD card image. Could anyone provide me a instruction guide? Thanks

Hello everyone. Please help me with the following problem. I have a Rock Pi 4b 1.4 (with SPI flash). I did the boot from the NVMe SSD using the image rkspi_loader-v20.11.2-trunk-v2.img according to the instructions. I installed Armbian 23.11 Jammy XFCE on NVMe SSD KingSpec NX 1TB. I’m using a power supply Baseus 65W GaN Pro (with PD). The system loads and works well. However, the system cannot reboot. When i click on reboot, the system starts to reboot and after the reset goes into a cyclic reboot. I need to turn off the power to reboot. What could be the problem and how to solve it? UART (Serial console) log: " " $&0 f@`B@@NF0f@`B@@NF 0f@`B@@NF@@@LN`b`N" " …

This is info from your www page download section.: "to boot from SD card you need to press and hold a button on the back side of the board and power on. This erases bootloader on eMMC and now you can boot from SD. In case of troubles use this tool to restore stock bootloader." I have downloaded Armbians image. Program Linux upgrade_tool cant flash it.... Loading firmware failed... of course i press recovery button from the bottom of hardware. RK_Android_Tool also not recognize img file. What is wrong with your firmware? Then I flashing micro-sd cart via dd command and did this from your page.: "to boot from SD card you need to press and hold a button on the back side…

Hello, When I would like to start my PPP connection my Kernel says missing Module: I use the RockPi 4b with the Image https://dl.armbian.com/rockpi-4b/Ubuntu_bionic_dev_nightly.7z root@rockpi00001:/opt/LTE# pppd call gprs & root@rockpi00001:/opt/LTE# Couldn't open the /dev/ppp device: No such file or directory modprobe: FATAL: Module ppp_generic not found in directory /lib/modules/4.20.13-rockchip64 pppd: You need to create the /dev/ppp device node by executing the following command as root: mknod /dev/ppp c 108 I have created the mknod /dev/ppp c 10…

Hello, I have a problem with my OrangePi 4, if I connect it with the operating system already installed at the factory (Android 8), I can get my USB keyboard and mouse connected to work normally. However, whenever I try a new image, be it Debian, Armbian or another version of Ubuntu, I can only get the mouse to work, the keyboard never works and I get stuck in the login screen where I can't write even the username and password. Can someone help me?

Hello, I am quite new to this topic, and I have found it to be quite complex. I primarily work with tiny MCUs and RTOSes, but I am enjoying the Linux space so far. In essence I would like to use the Mali GPU that is embedded within the RK3399 of the Helios64 for hardware transcoding. This isn't a novel idea, as shown by these sources: https://forum.armbian.com/topic/9272-development-rk3399-media-script/ https://emby.media/community/index.php?/topic/66675-36078-transcoding-rockpro64/ I am using Jellying, and in so FFMPEG to decode/encode the data streams. It seems that V4L2 is supported for hardware ecoding/decoding in the FFMPEG p…

I have the newest Armbian 28.08.0-trunk image running on a NanoPi R6C with a 4TB NVMe SSD. The NanoPi is only connected to power and 1G ethernet via the 1G WAN port. When using the machine as NAS with Samba and a Windows client connected there is a strange problem when receiving large files. The files are stored on the NVMe SSD with ~450MB/s read/write via PCIe 2.1x1. When transmitting files from the NanoPi to a SMB client the 1G ethernet is maxed out but when receiving files the connection drops down to ~60 MB/s every few seconds. This instantly gets fixed when using the 2.5G LAN port instead of the 1G WAN port. On that po…

I have the Helios64 NAS and am now at the point where I'll either get it working or toss it out and get something else.... it boots and runs and stops most of the time let's get some of the basics out of the way so we can figure out if here is the "best" spot to get help... uname -a returns root@helios64:/home/rmleonard# uname -a Linux helios64 5.10.21-rockchip64 #21.02.3 SMP PREEMPT Mon Mar 8 01:05:08 UTC 2021 aarch64 GNU/Linux cat /etc/os-release root@helios64:/home/rmleonard# cat /etc/os-release PRETTY_NAME="Debian GNU/Linux 10 (buster)" NAME="Debian GNU/Linux" VERSION_ID="10" VERSION="10 (buster)" VERSI…

Hey there, I'm running Armbian 23.8.1 Bookworm with Linux 5.10.160-legacy-rk35xx on a Rock 5B and am trying to get zfs via dkms to work, but it won't compile. ... configure: error: *** None of the expected "file_fallocate" interfaces were detected. *** This may be because your kernel version is newer than what is *** supported, or you are using a patched custom kernel with *** incompatible modifications. *** *** ZFS Version: zfs-2.1.11-1 *** Compatible Kernels: 3.10 - 6.2 Error! Bad return status for module build on kernel: 5.10.160-legacy-rk35xx (aarch64) I'm attaching the full build log,…

Hi, working on Rock Pi 4B++ and trying to make our displays work. Armbian Bookworm 23.8 Raspberry Pi 7" official touchscreen Officialy supported by Radxa (https://wiki.radxa.com/Rockpi4/Raspberry_Pi_official_LCD) but it does not work on Armbian at all. Works on official Radxa Debian image. No display on Armbian. Using device tree overlay from Radxa image - does not work, of course. Waveshare 4.3" touchscreen HDMI (https://www.waveshare.com/wiki/4.3inch_HDMI_LCD_(B)) It works. Image is visible, touchscreen works but the resolution seems to be scrambled. It is 800x480 and it is correctly reported, but the image is somehow distorted. I …

I installed the armbian image on an SD card and it runs fine. Now I would like to run it from the EMMC for long term reliability. i tried following what Dara Ó hEidhin did in this thread but am not successful For some reason google drive is not letting me download the driver assistant so RKdrivetool doesn't see the orange pi board like the video referenced in the thread so i cant flash it that way. I tried running it from the SD card and editing the armbianEnv.txt in the /boot folder from fdtfile=rockchip/rk3588s-orangepi-5b.dts to fdtfile=rockchip/rk3588s-orangepi-5b.dts and am able to see the EMMC drive. then i try a s…

Has anyone made WiFi adapter MT7601u to work with Rockchip64 as AP? I'm unable to compile the driver. I've tried: https://github.com/muratdemirtas/MT7601u https://github.com/Vyacheslav-S/mt7601u-AP https://github.com/Anthony96922/mt7601u-ap I've installed current headers, build-essential libncurses-dev bison flex libssl-dev libelf-dev. Any help appreciate it.

I am using kernel 6.12.45 with rk3568 , everything is displayed on my monitor. A colleague's computer does not work on 3 of the 4 monitors. the error is the same as in the theme / kernel: rockchip-drm display-subsystem: [drm] Cannot find any crtc or sizes , since it seems that no one is watching that topic, I decided to raise this issue. Has anyone encountered such a problem?

Hello everyone! I have an issue with rebooting my orangepi 4 (version without eMMC, booted from SD card). May be you can help with some kind of patch or workaround, or may it be a note for armbian devs. System: Debian GNU/Linux 10 (buster) Image: Armbian_20.05.0-trunk_Orangepi4_buster Affected kernel versions: dev-5.5.2; dev-5.5.5, current-5.4.21, legacy-4.4.213 I have built different armbian images from trunk (legacy,current,dev), and it looks like everything works absolutely fine, except the reboot. When I type 'reboot' the last thing I see in the serial log is something like this: [ OK ] Stopped target Local File Syste…

After upgrade to Armbian 20.11.3 Buster with Linux 5.9.14-rockchip64 eth1 has vanished. ❯ sudo ip link show 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP mode DEFAULT group default qlen 1000 link/ether 64:62:66:d0:06:18 brd ff:ff:ff:ff:ff:ff Any ideas? http://ix.io/2I2U

Is it possible to enable support for this device? I flashed this device with Orange Pi 4 firmware, but Wi-Fi and Bluetooth do not work there.

Hello, I recently updated my Helios64 board from 5.9.11 to 5.9.14 using `apt upgrade` and since then I'm unable to boot my board which is stuck on `Starting kernel ...`. Here is the log of the what got upgraded. Spoiler shepard@helios64's password: _ _ _ _ __ _ _ | | | | ___| (_) ___ ___ / /_ | || | | |_| |/ _ \ | |/ _ \/ __| '_ \| || |_ | _ | __/ | | (_) \__ \ (_) |__ _| |_| |_|\___|_|_|\___/|___/\___/ |_| Welcome to Armbian 20.11.1 Buster with Linux 5.9.11-rockchip64 No end-user support: work in progress System load: 2% Up time: 14 days 13:18 Memory usage: 14% of 3.71G Zram usage:…

Hi, hopefully my english and my linux skills are good enough (little bit experience with raspi and odroid i´ve setup Rock Pi 4 C with nvme boot from spi (first mmc) Armbian 21.02.3 Buster with Linux 5.10.21-rockchip64 after some difficulties to setup boot from nvme it is running on ADATA SX6000PNP when i perform reboot - mostly no reboot after disconnect power and reconnect no boot until i wait > 1 minute during the day i try sudo armbianmonitor - u and i get a link now when i use this command there is no more link serial console - i get no output but i can log in after a while Thanks

I've been hopelessly trying to get Armbian(Buster) and OMV to work together properly. But alas no luck. I decided to start over using a fresh and latest image on the SD card. I believe I may have unwittingly screwed up the eMMC boot process because I added an M.2 SATA drive in yesterday and have since removed it. Hence my quest to simply get the SBC up and running from the SD card. I have tried everything this morning, I cannot get an image to load at all. One of my questions is; do the hard drives need to be installed just to get the SBC working? I have tried with them in and out to no avail. Are there some lingering config files residing on the HDs th…

I understand that this problem is not related to armbian. I tries asking NexDock but they don't know how to make it. So, I just wonder anybody knows how to let armbian on Rock PI4B work with NexDock 360's keyboard ? I know when using Raspberry PI, I can add a line dtoverlay=dwc2,dr_mode=host to /boot/config.txt. But when using armbian, there is no config.txt in /boot. Thanks.

I have been trying to power on the Tinkerboard, but I haven't had any luck. The red power light never turns on What have i tried so far: I have tried connecting it to my PC using USB-C using a 12V power supply Using the Raspberry Pi USB-C Power Supply have even exchanged the device, but the issue persists.

CAUTION: This content is provided "as is," without warranties or guarantees, and the user assumes responsibility for any consequences, including data loss, system failure, or damages, whether direct or indirect. This is just a few hints how I persuaded mine helios64 to run stable with armbian 24.11 and linux 6.12.1-edge. I have been stressing it several days now and haven't encountered any issue/crash/kernel oopsie. 1) created custom device tree with higher cpu voltage: big cores up to 1800Mhz@1.3V small cores up to 1400Mhz@1.15V also the clock-latency-ns was bumped from 40000 to 50000 2) set up the cpufrequtils ser…

Hey guys. I'm totally new to this, used to fiddle with the PI when it came out but not any real serious projects. Just recently I've gotten annoyed on how I play back media and where I have my storage solution so I figured it was time for an upgrade. I've been reading this thread a lot, much respect goes to tkaiser for making such an amount of info available to us newbies. I actually ordered the Banana PI M3 until I read the wikis and this post which lead me to believe that the BPI M3 would make for a fantastically shitty NAS. I had actually ordered it but canceled the order before it was shipped. From those numbers I interpret that th…

Can someone please help me understand how Armbian for Rock64 is developed? In the past, there was an image for the Rock64 that was a server image, not a desktop image. Now, I see Ubuntu and a Debian Stretch desktop images, no server image. Is there a plan to build a server image going forward? Also, will a newer kernel be built at some point? Not trying to stir the pot or cause trouble, just trying to understand where the Rock64 support is going in the future. Thank you for all the spectacular work the Armbian team does.

THE MEDIA SCRIPT IS NOW DEPRECATED, IN FAVOR OF THE OFFICIAL MULTIMEDIA FRAMEWORK. PLEASE REFER TO THIS TOPIC: And, for last, the first version of: The UN-official, UN-supported, UN-expected RK3328 MEDIA TESTING SCRIPT This is the first release of the RK3328 media testing script. The script provides a functionality similar to its RK3288/3399 equivalents, except for the OpenCL related stuff, which is not supported by the SoC. So it includes: Installing all the libraries and system configurations necessary for GPU accelerated X desktop, Chromium WebGL, full VPU video play acceleration up to 4k@60 10-bit HEVC (the maximum su…

I have a Dev term a06 and have been having problems with the newer releases based on kernel 6.x. After booting one of these, the display does not have backlight or any text/image displayed. On the last 5.x it boots and works fine. I have not yet tried the HDMI output on the 6.x versions, need to get an adapter, but I'm guessing that the built in display is not discovered. The Dev term does not normally have a serial port, I'd need to solder up an adapter, or I would have looked at it to see if anything was happening. Any suggestions for a very basic Linux user to try? Especially something I can maybe edit after flashing (before first boot). I should be able t…

Hey, I am using a Nanopi M4v2 with a Satahat as server for openmediavault and plex. Since I got a lot of freezes/crashes (every 24-72h, the Nanopi lost the connection, and the green LED isn't blinking anymore) with "Armbian 20.02.7 buster current 5.4.28" on a SD-Card. I plugged a SSD in and used the nand-install script with a clean installed SD-Card. But this doesn't help, the problem is still there. The log got spamed with this: May 3 13:17:03 nanopi brcm_patchram_plus_rk3399[1338]: writing May 3 13:17:03 nanopi brcm_patchram_plus_rk3399[1338]: 01 4c fc ff 3d 01 22 00 00 0d 05 00 00 50 fb 31 May 3 13:17:03 nanopi brcm_patchram_p…

Hello, Followed instructions and installed zfs, rebooted, installed all updated via apt update and apt upgrade, rebooted and situation is like this: root@helios64:~# zpool status The ZFS modules are not loaded. Try running '/sbin/modprobe zfs' as root to load them. root@helios64:~# modprobe zfs modprobe: FATAL: Module zfs not found in directory /lib/modules/5.10.21-rockchip64 root@helios64:~# apt install zfsutils-linux Reading package lists... Done Building dependency tree Reading state information... Done zfsutils-linux is already the newest version (2.0.3-1~bpo10+1). 0 upgraded, 0 newly installed, 0 to remove a…

Hi there, I'm setting up microk8s cluster on: 2 x RockPi 4A (Linux 6.1.63-current-rockchip64) 2 x Rock 5 B (Linux 5.10.160-legacy-rk35xx) Installing microk8s and connecting cluster went without issue. My next step was to install https://microk8s.io/docs/addon-mayastor in order to create distributed volume between my nodes. The problem is that mayastor require linux-modules-extra which is not build for my kernel versions. I tried few different kernels but this module is not present there as well. My question is: Is there something what I can do? Is it possible to build this module for 6.1.63-current-r…

Since the specific USB hardware support is now in place, I thought it would be good to discuss pitfalls and remedies for transitioning to a modern kernel. I have now tested the 6.8.5 based Armbian. None of the latest packages (.408 - .411) come up with HDMI output. You have to have a serial console connected, and then correct the problems. 1) This is what you are greeted with: [ 6.828040] panthor fb000000.gpu: [drm] *ERROR* Failed to load firmware image 'mali_csffw.bin' To fix this do apt install armbian-firmware-full and reboot 2) The 8821cu driver has performance problems. Also, the stupid "windows" adapter comes up …

I'm putting together a build for a 3D printer, rk3308b-s board that has no ethernet, just a Fn-link wifi chip that is a knock-off of an rtl8192fs. I pulled the OEM dts and it describes the chip as an rtl8192cs. I'm pretty sure this is an out of kernel driver and my searches indicate I put source in userpatches. What do I need to add in the board/*.csc file to build to an image with the kernel module(s)? I do have a ralink ra2400, a mt7201 and some supported realtek dongles and If connected, I could git the code build and moprobe the module to test. Ideally, I would like to incorporate the driver via dkms in a armbian build. Can someone point me to the pro…