Rockchip

Can you guys share your experience with disk sleep on the Helios64 + Armbian. In my case I haven't seen the disks sleep - they are always spinning (or so they seem) and never on standby. I have a standalone /dev/sda and a RAID5 array with disks /dev/sd[b-e] (created with mdadm) - and XFS formatted logical volumes on top of these. 'iotop' says that nothing is accessing the disks: 'hdparm -B /dev/sd[a-z]' after each reboot is always: sudo hdparm -B /dev/sd[a-e] /dev/sda: APM_level = 254 /dev/sdb: APM_level = off /dev/sdc: APM_level = off /dev/sdd: APM_level = off /dev/sde: APM_level = off 'hdparm -C /dev/sd[a-z]' …

Nanopi Neo 3 is typically offered in 1GB or 2GB DDR4 RAM versions, but the RK3328 datasheet says the RK3328 can support up to 4GB If I were to source 2x 2GB of the supported types could I resolder to increase RAM? Official product page : https://www.friendlyelec.com/index.php?route=product/product&product_id=279 RK3328 Datasheet : https://rockchip.fr/RK3328 datasheet V1.2.pdf Neo3 Schematic : https://wiki.friendlyelec.com/wiki/images/a/ae/NanoPi-NEO3-2005-Schematic.pdf could anybody identify the chipname of the 2GB DDR 4 ram on the board?

Hello Armbian Team, I am experiencing some difficulties with my Orange Pi 5 Ultra. Currently, there is no Armbian distribution available for this board. Although official Debian/Ubuntu images are provided on the Orange Pi website, none of them include the latest NPU driver (RKNPU 0.9.8). Since Orange Pi 5 Ultra has hardware similarities with Orange Pi 5 Max, I was wondering if it would be possible to release an Armbian version for this board as well. An official Armbian release would be highly beneficial for developers and users who require a stable and optimized OS for this hardware. Would it be possible to consider adding support for Oran…

I flashed a home built nanpim4v2 image to two brand new Silicon Power 32GB sdcards and they wont boot whereas SanDisk 32GB boot OK can anyone explain why ?

Hi, I'm using NanoPi M4 $ uname -a Linux nanopim4 4.4.213-rk3399 #3 SMP Mon Oct 5 15:53:54 CEST 2020 aarch64 aarch64 aarch64 GNU/Linux and wondering if I can upgrade the linux kernel to 5.8.x without reinstalling other things. I tried armbian-config -> System -> Other All available options are those 4.4.213-rk3399 with different Armbian versions 20.08.x. I'm currently on 20.08.9 Appreciated any step, pointer Thank you

I've got an OrangePi based on the Rockchip RK3399. The official OrangePi Debian version I'm using is Armbian-based I believe and uses a 5.10 kernel. I want to upgrade the kernel as later ones support some video features of the RK3399 I want to use. The problem is, if I build the kernel using the standard vanilla method from kernel.org sources even using the same config file from the running kernel without changing anything (make olddefconfig), the device won't boot when I symlink the new kernel to /boot/Image. Interestingly, it does boot if I symlink the new initrd to /boot/uInitrd, but only with the old kernel. Is there something special I need to do to the k…

Howdy. I m running a Helios64 on Armbian 21.02.1 Buster with Linux 5.10.63-rockchip64. I realise this is somewhat old, but it works for me. I have been using MergerFS to present a big "vritual" storage area on my server: jon@OXYGEN:~$ more /etc/fstab UUID=a79a14c0-3cf4-4fb9-a6c6-838571351371 / ext4 defaults,noatime,nodiratime,commit=600,errors=remount-ro 0 1 tmpfs /tmp tmpfs defaults,nosuid 0 0 # "Disk 2" = /dev/sda3 = 8d360e1c-1908-4d8d-8289-2b1c83604950 UUID=8d360e1c-1908-4d8d-8289-2b1c83604950 /srv/m…

I was working with OpenHD when it was taken down by GitHub. There's something we should be concerned about here in the rockchip section of armbian? Original Post: https://github.com/github/dmca/blob/master/2025/12/2025-12-18-ffmpeg.md Identify only the specific file URLs within the repository that is infringing: https://github.com/rockchip-linux/mpp/blob/develop/mpp/codec/dec/av1/av1d_codec.h https://github.com/rockchip-linux/mpp/blob/develop/mpp/codec/dec/av1/av1d_cbs.c https://github.com/rockchip-linux/mpp/blob/develop/mpp/codec/dec/av1/av1d_cbs.h https://github.com/rockchip-linux/mpp/blob/develop/mpp/codec/dec/av1/av1d_parser2_syntax.c https…

Hi, I had some issues regarding WireGuard that are solved now. Since my armbian release already contains wireguard I have no need to install it. However I wanted to prevent any future mistake rendering my installation unbootable. So after some searching and experimenting I did the following: In order to block a package a file must be created in /etc/apt/preferences.d/ , in my case I called it wireguard $ sudo tee /etc/apt/preferences.d/wireguard &>/dev/null <<EOF Package: wireguard Pin: release * Pin-Priority: -1 EOF This is what it looks like now when trying to install the package: $ sudo apt install wireguard Reading…

Here's a video of GQRX receiving NOAA Weather Radio on my NanoPC-T4 armbian-nanopc-t4-gqrx-gnuradio.mp4

When plugging in a RTL8153 gigabit ethernet adaptor, it shows up when using lsusb, however there is no driver found for it. I also went to the Realtek website and tried to compile the proper drivers for it, however, the Make process always fails. Do you have any suggestions as to how to get this to work? The adaptor says it is supported on the Armbian website. Thanks!

Hello, I have a Rock64 V2 which I am using as a Tvheadend server, among other stuff. For some months I put the kernel/dtb packages on hold, because I discovered that linux-image-rockchip64 after version 5.75 did not include the kernel module for th USB DVB-T stick I need (an EyeTV DVB-T device, i.e. a clone of Hauppauge), that is dvb-usb-dib0700 or the like (I am trying to remember). I have recently unhold the Linux packages and let apt to update them. Now at version 5.90, I see that the kernel module is still not included, and my USB device cannot be used. Going back to Linux image 5.75 makes the stick to work again, but I'd like to have the lates…

Hi, I have a problem with my NanoPi M4V2 (with Raspberry Pi 4 power supply) and the new Armbian release 19.11.3 (Buster). I can boot the image from SD, eMMC. But when I connect any USB storage (USB-Stick or SSD with USB to SATA) then I have packet lost on the Ethernet connection. Any idea where the problem is? On the interface I can't see problems. eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet 192.168.xx.36 netmask 255.255.255.0 broadcast 192.168.42.255 inet6 fd58:xxxx:xxxx:1::1006 prefixlen 64 scopeid 0x0<global> inet6 fe80::94ad:f6ff:fe0d:757b prefixlen 64 scopeid 0x20<link&…

I am still trying unsuccessfully to get the sound through the rt5651 codec using the main line kernel (I use NanoPC-T4). I corrected the dts/dtb file and assembled the kernel module. The kernel performs i2s bus and codec switching. The corresponding audio device appears on the system. I start a alsamixer. I can change settings. When I change some settings, I can even hear clicks in the dynamic. So the codec chip is powered up. And the codec chip is controlled through the i2c bus. I can switch the audio output through the codec. But there is no sound. I can 't figure out what the reason is. The dts/dtb files for main line kernel and rockchip 4.4.xxx kernel are slightly dif…

After the next (last) update, the system does not boot, there is no ssh access, and the monitor does not turn on. I just didn't install updates for three weeks and decided to update yesterday What should I do, re-install the system ? The loader is located on the sd card, and the system is on the hdd, using the 4.4.x kernel

I have a strange problem with my R2S. I grabbed latest buster and focal images, burned them using Balena Etcher onto a pair of 32GB SanDisk Extreme Cards and neither is booting. Serial console shows that boot process gives up waiting for root file system and drops me into initramfs shell. Looking into /dev, I see no mmcblk0 device (or any other block device apart from loops). If I now eject and re-insert the card, the device shows up. If I do it during boot process, while the board is still waiting for rootfs, boot process continues correctly. Reboots are fine, but if I unplug the board for longer than a second it's back to initramfs for me. …

I'd like to build a portable LimeSDR Transceiver. I would like to use a USBC 1080p IPS touchscreen. Has anyone had any experience with USBC touchscreens with the RK3399 SBC ?

Hello, I have used NanoPi M4v2 with "NVMe SSD adapter" (Officially sold by the FriendlyElec). NVMe SSD is detected when I installed ubuntu based kernel 4.4. (FriendlyCore 18.04 or Armbian Bionic desktop based kernal 4.4.y) But When I installed armbian based kernel 5.x, NVMe SSD is not detected. Anyone can advise?

I have Rock64 board with latest Armbian Focal flashed on it. I want to use it with this HDMI display by Waveshare: https://www.waveshare.com/wiki/7inch_HDMI_LCD_(H)_(with_case) Now, when I connect it to Rock64 it runs as 1080p downscaled by HDMI controller on display, resulted image is garbage, even though it is present. As was discussed here: https://forum.armbian.com/topic/10071-tinker-board-hdmi-resolutions-do-not-all-work/ current kernel/u-boot doesn't have required video mode to run this display properly. I tried to set required mode with xrandr but with no success. Can anyone help me to figure out how to patch kernel/u-boot to get this thing work properl…

Hi, My NanoPi M4 V2 Won't Boot via SD ... the emmc is not installed on the board The RED light is ON but the GREEN stay OFF I cannot reached to read correctly the data coming from the serial port debug (I tested with many bauderate, also with 1500000, same result ... a lot of weird characters) Tested Versions Won't boot: Armbian_22.08.1_Nanopim4v2_jammy_current_5.15.63.img.xz Armbian_22.08.1_Nanopim4v2_bullseye_current_5.15.63.img.xz Armbian_22.11.0-trunk_Nanopim4v2_sid_edge_6.0.3.img.xz Armbian_22.11.0-trunk_Nanopim4v2_kinetic_edge_6.0.3.img.xz Tested Version Boot properly: Armbian_21.02.1_Na…

flashed Both Armbian_community_24.8.0-trunk.495_Tinker-edge-r_noble_current_6.6.43_gnome_desktop, Armbian_community_24.8.0-trunk.495_Tinker-edge-r_noble_current_6.6.43_gnome_desktop. stalling cpu, and failing to boot. logs for both attached. Armbian_community_24.8.0-trunk.495_Tinker-edge-r_noble_current_6.6.43_gnome_desktop.txt Armbian_community_24.8.0-trunk.495_Tinker-edge-r_bookworm_current_6.6.43_minimal.txt

Hi! My Helios64 crashed, rebooted, then refuses to continue. Seems something is corrupted : the eMMC module? The eMMC contains the /boot folder, then the rootfs is on 1st disk, sda1. So I didn't lose anything, I guess. I will try to boot an microSD card with armbian and if it works, I will boot from it. With the sd card, it doesn't boot, I will disable eMMC with the jumper as documented in the wiki Is it fixable? Here are the startup messages: DDR Version 1.25 20210517 In channel 0 CS = 0 MR0=0x18 MR4=0x1 MR5=0x1 MR8=0x10 MR12=0x72 MR14=0x72 MR18=0x0 MR19=0x0 MR24=0x8 MR25=0x0 channel 1 CS = 0 MR0=0x18 MR4=…

Hi, I have armbian image with kernel 4.4.184-rockchip64. Now I want to connect with Wifi using commands but I dont know how to connect using commands. I am able to connect with WiFi using Graphical tool. Below are my observations: a) Instead of wlan0, p2p0 interface is used to connect with wireless network. b) I am able to scan with wlan0 using below command: iw dev wlan0 scan c) iw dev p2p0 scan gives output associated interface( the one connected using Graphical Tool). d) I created wpa_supplicant.conf file and executing below command shows wpa_supplicant initialized but does not get IP address. wpa_supp…

Hi. I am faced with the problem of installing overlays on Orange Pi 4. I need to use SPI and I use the following settings: verbosity=1 bootlogo=false overlay_prefix=rockchip rootdev=UUID=946e374a-7ca8-488d-ad86-ab38ccfc7cc1 rootfstype=ext4 overlays=spi-spidev param_spidev_spi_bus=0 usbstoragequirks=0x2537:0x1066:u,0x2537:0x1068:u As far as I know, after connecting the overlays, the devices should appear in the list / div, but this does not happen. New devices will not appear also when installing overlays w1-gpio or uart1 I also have problems with Ethernet connection if I use param_spidev_spi_bus=0, but if i use param_spidev_spi_bus=…

Hi, Have the r2s for some time and it worked well in the beginning. But then it started to freeze randomly. The logs do not have any error in it. Initially I thought it could be the interface drive problem, changed the interface and still freezes. When the r2s is frozen, serial port won't respond. Keeping serial connection and restarting the r2s, boot messages show normally. When I keep the serial connected, r2s do not freeze (tried for more than a week). Found this other post, not sure if this is the same problem as it does boot, but seems related. mUSB serial connection rarely works. Have to boot some times until it works. Although I am an exp…

The armbian edge image for the FriendlyElec CM3588-NAS is currently on kernel 6.17 but has no HDMI audio despite it having been added in 6.15 (I think). This is simply because it has not been enabled in the device tree for this board. You can enable it with this user overlay: /dts-v1/; /plugin/; / { fragment@0 { target-path = "/hdmi0-sound"; __overlay__ { status = "okay"; }; }; fragment@1 { target-path = "/hdmi1-sound"; __overlay__ { status = "okay"; }; }; };

Hi, I have started to work on a Nanopi Neo3 Plus image (rk3528-based, similar to Nanopi Zero2), announced early March 2026. Created a new .csc file, used the Nanopi Zero2 as a template. Built it with the vendor version. Built it with the vendor kernel., but added the "dt" directory with the rk3528-nanopi-rev02.dts to be "automatically" added to the dts directory and Makefile. The base console version seems to work ok when I generate a bookworm image. As I currently only need u-boot, kernel and dtb's to build my own OS (Volumio, volumio.org), it works for me. Of course, I would like to contribute my work (and support it?), but how do I …

I loaded both the Raxda Debian OS and the Armbian OS on the Rock Pi 4A+ (4GB RAM / 32GB eMMC) integrated eMMC chip and both boot fine. I then ran the Phoronix pts/scikit-learn benchmark and got a big discrepancy in performance: https://openbenchmarking.org/result/2112285-NE-2112281NE08 The Raxda Debian OS (noted as rockpi4a+raxdadebian in the benchmark) performs basically the same as the Rock Pi 4A version (noted as rockpi4-rk3399 running Armbian), as expected. The Armbian OS (tested multiple times as rockpi4a-emmc, rockpi4a+, rockpi4a+governor, and rockpi4a+armbian) all perform terribly. Thoughts?

Hello All, Preface: First time posting, I am not an experienced software developer but have designed a working SBC around the RV1126. I have had some success recently getting video out of an IMX258 camera connected to the RV1126 but I am experiencing a strange issue where the camera feed has a green hue. (see attached picture). I have tried to change variables within the kernel - IMX258.c and many other places to change the auto white balance with no success but have recently come across this thread which may provide better results: https://forum.pine64.org/showthread.php?tid=17067 I do not have the RKISP2_tuner.exe in the camera_engine_rkaiq …

Hi, I upgraded to the stable version of Debian (Trixie) Armbian Linux 6.18.23-current-rockchip64. And the USB 3.0 port stopped working. Other USB 2.0 works fine. orangepi3b:~$ lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 152d:0578 JMicron Technology Corp. / JMicron USA Technology Corp. JMS578 SATA 6Gb/s Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Found…

Hello, yesterday i see that the SATA Hat for the Nanopi is available now is it possible to install Armbian on a SSD when i use the Sata Hat ? Or is the EMMC or SD Card required for the OS ?

I have a development board, model eaidk-310, with soc rk3228h (which is said to be the same as rk3328). The official website of the board has been closed, so I cannot obtain more related information. However, I found the official firmware and can use rockchip's official tool for burning. The file structure is as follows. 190798 Jun 8 2020 MiniLoaderAll.bin 33554432 Jun 8 2020 boot_linux.img 374 Jun 8 2020 parameter-linux.txt 6815744000 Jun 8 2020 rootfs.img 4194304 Jun 8 2020 trust.img 4194304 Jun 8 2020 uboot.img parameter-linux.txt is: FIRMWARE_VER:8.1 MACHINE_MODEL:RK3328 MACHINE_ID:007 MANUFACTURER:Rockchip MAGIC: 0x5041524B…

I downloaded the image of nanopi R6s from the official website[https://www.armbian.com/nanopi-r6s/](https://www.armbian.com/nanopi-r6s/), but it failed to start no matter burning to sd card or emmc. I know a lot of people have this problem, like this page [https://forum.armbian.com/topic/27904-armbian-images-for-r6s-r6c/?do=findComment&comment=164029](https://forum.armbian.com/topic/27904-armbian-images-for-r6s-r6c/?do=findComment&comment=164029) This is the log printed by the serial port: ``` DDR V1.12 52218f4949 cym 23/07/06-19:46:50 LPDDR4X, 2112MHz channel[0] BW=16 Col=10 Bk=8 CS0 Row=16 CS1 Row=16 CS=2 Die BW=16 Size=2048MB channel[1] BW=16 Col=10 Bk…

Hi! I am working on a project in which audio is transmitted over the I2S bus to TAS6424-Q1 chips. I am using the Radxa Rock S0 board, the latest stable Armbinan 6.6 kernel and an additionally compiled dummy-codec module. 1. If I use the following overlay // Definitions for 8-ch-output /dts-v1/; /plugin/; / { compatible = "radxa,rockpis", "rockchip,rk3308"; fragment@0 { target = <&i2s_8ch_0>; __overlay__ { #sound-dai-cells = <0>; rockchip,clk-trm = <1>; status = "okay"; }; …

Hi everybody, I installed Deb 12 Cinnamon Armbian flavor on an Orange PI 5 and Orange PI 5 Plus. This: dl.armbian.com/orangepi5-plus/Bookworm_current_cinnamon-backported-mesa I want to test 'virt-manager' but qemu is not available for installation. Error on console: packages are updated me@orangepi5-plus:~$ sudo apt install qemu [sudo] senha me: Lendo listas de pacotes... Pronto Construindo árvore de dependências... Pronto Lendo informação de estado... Pronto package qemu is not available, mas é referenciado por outro pacote. Isto pode significar que o pacote está faltando, ficou obsoleto ou está disponível som…

Would like to be running fail2ban but missing an important kernel module -> xt_multiport Any ideas on obtaining this? modprobe: FATAL: Module xt_multiport not found in directory /lib/modules/6.12.22-current-rockchip64

i2cdetect -l i2c-1 i2c rk3x-i2c I2C adapter The i2c-1 device works fine and there is a working sensor attached. Trying to get the i2c-0 device up and running. Added overlays=i2c0 to /boot/armbianEnv.txt but it didn't work. There doesn't appear to be a file with that name so I'm not sure if this doesn't exist or if there is a package that needs to be installed. find / -name '*.dtbo' 2> /dev/null | grep 3308 /boot/overlays/rk3308-uart2.dtbo /boot/overlays/rk3308-uart1.dtbo /boot/overlays/rk3308-uart0.dtbo armbian-config flashes this in the system->hardware menu …

Hi there, So I'm having a problem connecting the helios to the router. I try different lan cables and different ports. It was working everything fine yesterday, I did a reboot and no more connection. I'm completely new to this. I was installing home assistance and plex before this happened but I believe I didn't mess with anything to do with network. Don't know what I might have done. I can connect to helios via putty and after logging in the part where ip should be there is none. Any advise would be most appreciated. Again I'm completely new to this.

A stable Armbian Bookworm configuration for your Helios64 is provided here (solved). ************************************************************************* Recently a new Armbian 23.08.1 Bookworm image with linux-6.1.50 was made available for Helios64 on its download page (see here) - which is as such great 😀. Everything starts up nicely, but unlike the previous Bookworm 23.05 image, the current one has an issue with accessing USB devices. In the boot process the following error occurs: # cat /var/log/syslog | grep error 2023-09-07T12:31:05.671598+02:00 helios64 kernel: [ 2.537009] dwc3 fe900000.usb: error -ETIMEDOUT: failed …

Can anyone confirm whether HDMI-CEC is working on the opi5pro? I got one recently and regardless of distro neither cec-utils or v4l-utils can see any devices. e.g. cec-ctl: > cec-ctl -S Driver Info: Driver Name : dwhdmi-rockchip Adapter Name : dw_hdmi_qp Capabilities : 0x0000000e Logical Addresses Transmit Passthrough Driver version : 6.1.75 Available Logical Addresses: 4 Connector Info : None Physical Address : f.f.f.f Logical Address Mask : 0x0000 CEC Version : 2.0 Vendor ID : 0x000c03 (HDMI) OSD Name …

Thank's for supporting Rock64! Is there a chance for a debian server image (beta) within the near future? All my boards are running a armbian debian OS and I would like to stay consistent here... Best regards Martin

The best way, the simplierst way, the cheapest getting one can get it in which part of he world I'd like to get as most answers as possible Also in Russia!

I have a Ambian 6.12.7-Edge-Rockchip64 minimum installation. How can I enable or upgrade to a desktop environment without changing the kernel? Thank you

Board: Nanopi M4 with 4GB OS: Armbian_5.65_Nanopim4_Debian_stretch_default_4.4.162 Boot from SD, rootfs on an external HDD 8TB (WD MyBook). I attached another external HDD (Toshiba 2TB). I have been trying rsync -avh from the Toshiba one to the main MyBook one. It ran for under a minute before reporting files were vanished and exited with errors. It appeared the / is gone. nothing return from ls. Hard-reboot, fsck ran, everything's back to normal. I've been trying rsync with nice -n 20 as well as --bwlimit 10, 1MB. Nothing helped. stress test the board for 10 minutes, (stress -c 4 -m 4 -d 4 -i 4). All looks good. Any help's…

Thank you for sharing the link. Inspired me to write an overlay for my NanoPC-T4. Now I can attach an additional monitor via my Delock 63959 USB-C to VGA / HDMI / DVI / DisplayPort Adapter with 5.10.0.

U-boot defaults to "In: serial" and also listens for packets (its assumed that its a keyboard/terminal) so that a keypress can stop autoboot. I am successfully using /dev/ttyS2 after modifying /boot/armbianEnv.txt (Console=Display) and masking the gettyS2 service. The device/system I have connected to UART2 (/dev/ttyS2) periodically sends bytes. Thus, if a remote restart or a cold boot is performed (power glitch or power reset) while that system is connected to UART2, it triggers the abort of Autoboot. Requiring the other system/device to be disconnected from UART2, a cold boot of the RockPi4 and then reconnection of the system/device to UART2. I…

Hello, Some weeks ago, I installed the "under development" version. File was named Armbian_22.11.0-trunk_Odroidm1_kinetic_edge_6.1.0-rc5.img.xz Now, I see that the "advertised" version is a rolling release armbian 22.11 Jammy. Based on this (https://wiki.ubuntu.com/Releases) page kinetic is an earlier version than jammy. If I scroll down the page ( https://www.armbian.com/odroid-m1/ ) , I see a kinetic rolling weekly release. I suspect that the kinetic is an unstabled release while Jammy 22.11 is. Please can you confirm/explain? If yes, is there a way to "downgrade" to the stable version? Thanks …

Hi guys, sorry if this question might sound stupid, but how do I open the M3 enclosure? There is no instruction in the manual, nor on the stationpc website. I just bought this little box and I am not sure if this has some screws or some other closing system. I can see the four rubber buffers on the bottom of the box, but I don't want to harm those without reason. Can anyone tell me how to disassemble the box? Thanks in advance.

Greetings, I have multiple NanoPi NEO3s on the same subnet. When booting with Ubuntu 20.04.6 LTS they use the physical MAC address when posting to DHCP, but ARMbian seems to create a default (fake) MAC address and uses that instead. Judging by the "armbianmonitor -U" output, ARMbian knows about the physical MAC address, it just doesn't use it. The NEO3 board is listed as supported, but there is another posting dated 2020 that still seems to be unresolved. MAC address c2:1f:b3:b0:d2:41 seems to be a generic (fake) address that is being used. Is there a remedy to allow it to use the actual hardware address with this kernel ? -- -- -- brack…

Hello, Recently I tried to make pwm control on my Nanopi M4. Beside the PWM pin on the 24 pin connector (the one which actually controls the voltage output on 12V 2 pin connector for fan), I wonder if it is possible to use GPIO pins on the 40 pin connector as pwm pins to control fans. I tried to set pwmchip0 and literally checked every pin by connecting the wire to each one of them but I couldn't find that any othe these GPIO react on any settings I made on pwmchip0 pwm0. Does anyone know how to do this? Best Regards.

I'm getting burst "VOP vblank IRQ stuck for 10 ms" error messages in dmesg and wondering what it means and if anything to improve/fix. I'm using Nanopi m4 $ uname -a Linux nanopim4 5.10.21-rockchip64 #21.02.3 SMP PREEMPT Mon Mar 8 01:05:08 UTC 2021 aarch64 aarch64 aarch64 GNU/Linux kern :err : [Sat Mar 13 22:20:13 2021] rockchip-vop ff8f0000.vop: [drm:vop_crtc_atomic_flush [rockchipdrm]] *ERROR* VOP vblank IRQ stuck for 10 ms kern :err : [Sat Mar 13 22:21:04 2021] rockchip-vop ff8f0000.vop: [drm:vop_crtc_atomic_flush [rockchipdrm]] *ERROR* VOP vblank IRQ stuck for 10 ms kern :err : [Sat Mar 13 22:21:04 2021] rockchip-vop ff8f0000.vop: [drm:vo…

Hi, my company have commissioned at an external company ti develop a device based on rk3399. The external company have returned a device with a Debian 10 Linux image for the device. We are not satisfied about its the Debian distro maded by the external company because the UI it is not perfect. Sometimes, by moving forms, a little part of the display is not repainted correctly or sometimes a portion of a form disappear. So the question is: wich is the right way to build a Debian distro ourself? I have tryed ubuntu fiendlyarm. The os starts, I can enter by ssh but nothing appear on the display so, wich is the righ way to manage the hardware configuration of a custom d…

I recently plugged in a 4TB Seagate Expansion hard drive and it worked fine. After rebooting the Rockpi4B via 'sudo reboot' the drive is not recognised - dmesg shows: [ 3.877060] sd 1:0:0:0: [sdb] Unit Not Ready [ 3.877082] sd 1:0:0:0: [sdb] Sense Key : 0x4 [current] [ 3.877094] sd 1:0:0:0: [sdb] ASC=0x44 <<vendor>>ASCQ=0x81 Any ideas?

I have a weird issue where I have everything working as I want it a few different services running in docker (Pi-Hole, Motioneye, Home Assistant, Emby) and all their individual management pages are accessible. However as soon as i move the install over to emmc, all networking seems to break, with services no longer working, but some admin pages report everything is fine. Pi-Hole for example shows as running but no devices accessing the dns cant load webpages and the pi-hole management pages stop showing any further queries received. ive repeated the process of doing a clean install to sd , everything fine. move to emmc stops working ☹️

Hello to everybody, I am using rock 5b, PCB Version 1.42 with Armbian 22.11 CLI. I would like to connect IQaudIO DigiAMP+ based on the TAS5756 (https://shop.max2play.com/en/iqaudio-digiamp.html). According to the GPIO pinout of ROCK 5b and the datasheet of DigiAMP+ (page 21), this seams to be feasible from the electrical perspective. But the software perspective overwhelmes me as a linux novice. If I understand it correctly, I need more or less two things: a device tree overlay to activate the appropriate GPIOs with their I2S and I2C functionality and to tell the kernel about the attached device (DTS file or the compiled D…

I tried to install OMV 7 RC1 on the Bookworm image, but I get a lot of "Segmentation fault" and "free(): invalid pointer" error messages. My Installation for the Bookworm image... Is the problem due to the Bookworm image or the 6.6.8 kernel or should I contact the OMV team? Here is the complete log of the OMV 7 RC1 installation... Spoiler root@helios64:~# sudo curl -sSL https://github.com/OpenMediaVault-Plugin-Developers/installScript/raw/master/install | sudo bash [2024-02-22 13:32:50+0100] [omvinstall] script version :: 2.3.9 [2024-02-22 13:32:50+0100] [omvinstall] Armbian [2024-02-22 13:32:50+0100] [omvinstall] Starti…

Hi! My Orange Pi 5 (no Pro, no Plus, no B…) was running Armbian, the Debian Bullseye flavour. It was running Linux `5.10.110-rockchip-rk3588`, then I installed the `linux-image-current-rockchip-rk3588` metapackage, which pulled and installed Linux `6.10.6-current-rockchip-rk3588`. Right after having installed such kernel, I tried to reboot the device, but the device never rebooted: it's just stuck at startup, nothings is displayed on screen and the device is not available on the network (doesn't do any DHCP request at all). I fully unplugged anything from the board, including removing and re-inserting the microSD card. The device now refuses to boot since I up…

Hi, I would like to share my recent work: a cheap USB Audio Class 1.0 (UAC) input to UAC 2.0 output converter. For folks that may not understand why I have this crazy idea, here is the background: For some shitty reasons, PS5 does not support outputting audio through certain USB sound card, and that is because PS5 only supports very old USB sound card (UAC 1.0), and usually high end speakers or sound cards would use newer, better UAC 2.0 protocol. So, this shitty thing happens to me, when I thought my EDIFIER S880 speaker would be a plus for my gaming experience. EDIFIER S880 has a UAC 2.0 in input source, so my PS5 does not support that. So, what I …

During installing Helios64 with the latest image I experienced several times that the system did not come up. Now that it is fully installed with OMV enabled, I sometimes do a reboot, and the system does not come up. Unfortunately I cannot see anything on the console level (on MacOS). After pressing the reboot button (around one or two times) the system comes up as nothing happened ever. What can I do to have the system reboot in a stable manner? Since it will sit in the basement soon, I don't want to run down every time I see that it does not reboot properly.

I don't have a NanoPC-T4, but I have a NanoPC-T6 which I mainly bought because of the Dual Camera options of the MCAM400 on the T4 and the high-speed encoding properties of the Rockchip... those possibilities should be very similar for the T6 actually... Whatever, the camera configuration seems to be mostly here but I struggle to do the similar thing with the device tree of the T6... Anyone who has an idea about this and is willing to help me with that?

I have a FriendlyElec 1080P HDR camera(MACM400). It only works on some FriendlyElec Release with 4.4 kernel. So how could this camera work on Armbian with Mainline kernel?

I have a problem with Focal on Nanopi-M4V2 is that when it is overloaded and runs out of memory, instead of getting slow it kills the process causing the problem and in the last few cases, logs out out of Ubuntu Mate ;-) [Sun Jul 26 17:12:54 2020] Out of memory: Killed process 12888 (Web Content) total-vm:3097484kB, anon-rss:455520kB, file-rss:1600kB, shmem-rss:16636kB, UID:1000 pgtables:2752kB oom_score_adj:0 [Sun Jul 26 17:12:54 2020] oom_reaper: reaped process 12888 (Web Content), now anon-rss:0kB, file-rss:0kB, shmem-rss:16220kB [Sun Jul 26 17:13:22 2020] panfrost_gem_shrinker_scan: 60 callbacks suppressed [Sun Jul 26 17:13:22 2020] Purging 4595712 …

Hello, Sorry for my bad english, I'm French, I'm using "Armbian_20.11.4_Helios64_buster_current_5.9.14.img.xz" During the startup sequence I get the following errors: GPT 0x3380ec0 signature is wrong recovery gpt... GPT 0x3380ec0 signature is wrong recovery gpt fail! LoadTrust Addr:0x4000 No find bl30.bin No find bl32.bin Load uboot, ReadLba = 2000 Load OK, addr=0x200000, size=0xdd6b0 RunBL31 0x40000 NOTICE: BL31: v1.3(debug):42583b6 NOTICE: BL31: Built : 07:55:13, Oct 15 2019 NOTICE: BL31: Rockchip release version: v1.1 INFO: GICv3 with legacy support detected. ARM GICV3 driver initialized in EL3 …

Hello, Apologies for wrong tag, but I am hoping one or more can help with what has been a frustrating process for a Linux\Orange Pi newbie. Background information: I got Orange Pi 800 due to shortages with Pi 400. I wanted to run home assistant on it. Came to determine to get what I wanted would entail having Debian installed and not Ubuntu. Flashed the micro sd card and the Pi 800 does not boot to it. I was able to remote to it via Putty, but I was not able to set it up correctly. What ended up happening was Debian got installed but not in the way I expected. The Orange Pi desktop still boots but I get system application error. The Orange Pi can see the micro…

Just stumbled over another chromium fork: https://github.com/Alex313031/Thorium Forum search did not show any entries, so I thought I might share. The arm64 builds (for raspberry though) works great, it even has googly sync, widevine etc, check describtion for more info. It works out-of-the-box on legacy rock-5b jammy gnome images with liujianfeng1994 ppa enabled. For installation/updates one could also use: wget https://dl.thorium.rocks/debian/dists/stable/thorium.list sudo mv thorium.list /etc/apt/sources.list.d/ sudo apt update sudo apt install thorium-browser I usually like to test https://paveldogreat.github.…

First of all thanks to the people maintaining armbian for helios64. I recently upgraded (well I reinstalled) to trixie and everything mostly runs stable for me. However I have a problem with the 2.5GB adapter. It is connected to a 2.5GB switch and when for example running iperf3 I get proper results close to 2.5 GBit. So in general it seems to be running ok. I have a DLNA server (minidlna) running on that machine and when I stream from my TV (streaming via VLC from my laptop triggers the same problems) the network connection drops for a moment and works again after a few seconds (which you can guess is super annoying when watching something). I am not sure wha…

The wireless interfaces are not coming up [ 16.959456] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 16.969238] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 16.971635] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 16.971650] cfg80211: failed to load regulatory.db [ 41.751941] rk_gmac-dwmac ff540000.ethernet eth0: Link is Up - 100Mbps/Full - flow control off [ 41.751976] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready

Is there a reason this is turned off? From linux-rockchip64-current.config: # # CD-ROM/DVD Filesystems # # CONFIG_ISO9660_FS is not set # CONFIG_UDF_FS is not set # end of CD-ROM/DVD Filesystems Whereas most other configs have this enabled as modules. For example, in linux-sunxi64-current.config: # # CD-ROM/DVD Filesystems # CONFIG_ISO9660_FS=m CONFIG_JOLIET=y # CONFIG_ZISOFS is not set CONFIG_UDF_FS=m # end of CD-ROM/DVD Filesystems

I was wondering if the Armbian 11 Bullseye release would get a release candidate for the following ppa's for Panfrost: ppa:liujianfeng1994/panfork-mesa ppa:liujianfeng1994/rockchip-multimedia Because I was really hoping to use Debian over Ubuntu for my purposes of familiarizing myself with the distro, but only Jammy so far has a candidate for these. I also tried manually installing the Panfrost/Panfork drivers on Bullseye and only got it working once before borking my entire system, and I cannot replicate it. Any help or information would be greatly appreciated, as the GPU acceleration on Jammy is simply amazing!

Hi, I've booted the board from SD card with the latest image and I'm trying to configure the board to boot from MTD and use USB drive as a system drive. When running armbian-config (or armbian-install, or nand-sata-install), it fails with error "SPI u-boot image not found!". It looks like the bootloader package is missing the /usr/lib/linux-u-boot-current-rock64_23.02.2_arm64/rkspi_loader.img. Can I find it anywhere? Dmitry

Hi, I've got a Helios64 device running with OpenMediaVault 6.9.2-1 (Shaitan). kobol@helios64:~$ uname -a Linux helios64 6.1.50-current-rockchip64 #3 SMP PREEMPT Wed Aug 30 14:11:13 UTC 2023 aarch64 GNU/Linux It has been stable until I recently install openmediavault-photoprism 6.0.9-1 plugin provided by OMV6 through a podman container. I want to use PhotoPrism to help categorize my photos. The issue is my device systematically reboots during photo folder initial scan: the scan actually loads the system a lot, and in this state of activities, a reboot occurs after about 30 minutes to 4 hours. I first thought of a CPU temperature is…

Hey there! I’ve been running Home Assistant Supervised on Armbian for a while, but lately I keep seeing a repeat issue after system upgrades (Docker or kernel updates). After upgrading, some HA containers stop unexpectedly, for example: odroid-c2-homeassistant:2025.12.2 exits with code 137 aarch64-addon-configurator:5.8.0 exits with code 143 My current setup runs on Helios64/RK3399 · kernel 6.12.58-current-rockchip64 · Docker CE 29.1.3 (f52814d). After digging a bit, I noticed this line in dmesg right after the failures -> apparmor="DENIED" operation="signal" profile="hassio-supervisor" signal=kill I also fou…

Hi - trust this is the right forum. I have forgotten the login password to my Arbian installation on the nanopi m4 V2. It boots from the eMMC just fine, but I am stuck at the prompt. I had only just installed it a few weeks ago (then things got hectic), so nothing really invested - I could just install again via the SD card, right? Unfortunately, it looks like the SD slot is no longer working. In the last 2-3 days nothing seems to boot from it. Which leaves me with an eMMC module loaded up with an Armbian - I think its bionic, because it does have wifi (buster never worked with wifi). In other 'vanilla' flavours of of l…

Hi, I wanted to try this build so I cant test HW (using the legacy kernel). But, is impossible to make Rock64 boot correctly, having random kernel crashes, It does boot with the 5.10.x kernel version and work just fine, but I need the Legacy one so I can test HW. I can only attach a photo since there is nothing I can do since the OS is halt. Any ideas? Thanks.

Hi my Helios 64 do not boot up anymore. In serial console i can see U-boot crc problem. So what can i do? Spoiler port is : /dev/ttyUSB0 flowcontrol : none baudrate is : 1500000 parity is : none databits are : 8 stopbits are : 1 escape is : C-a local echo is : no noinit is : no noreset is : no hangup is : no nolock is : no send_cmd is : sz -vv receive_cmd is : rz -vv -E imap is : omap is : emap is : crcrlf,delbs, logfile is : none initstring : none exit_after is : not set exit is : no Type [C-a] [C-h] to see available commands Terminal ready T T DDR Version 1.24…

Hello, i have trouble with my Helios64 (possibly bricked), so I am interested to by a new one. And if i can fix mine, the second one could allow me to participate to armbian support for it. Anyone have one for sale ? Preferably in Europe. Thank you.

Hello everyone, I somehow managed to brick my OrangePi 4 LTS. I had the Armbian running on it and decided to try the newest install in a minimal format so no desktop. Installed it, made all the setup and restarted. Since then no other image works, neither the official orangepi images nor any other armbian image. I tried booting off without the SD Card, trying to flash another OS with the SD card and read out the TTL and this is what I get: DDR Version 1.25 20210517 In channel 0 CS = 0 MR0=0x18 MR4=0x2 MR5=0x1 MR8=0x10 MR12=0x72 MR14=0x72 MR18=0x0 MR19=0x0 MR24=0x8 MR25=0x0 channel 1 CS = 0 MR0=0x18 MR4=0x2 MR5=0x1 MR8=0x10 MR12=0x72 MR14=0x72 MR18=0x…

Hi all! I have Armbian installed on a rock 4SE (Tagged as 4B as it uses the same image i believe) as the base for an OpenMediaVault. Yesterday i installed the latest version of Bookworm, as i am running OMV7 and that, as far as i can tell, does not work on Trixie. I am not ready to upgrade to Trixie/OMV8, as im not sure there is support for my Penta sata hat yet. My issue is that if i install the updates, either through OMV interface, or apt, the device does not boot after applying the updates. As far as i can tell from logs etc. something is either wrong with loading the kernel image on boot, or with the image itself. If i install Armbian, and then OMV, ev…

Hi All, Below command works well on my other boards(Intel with Fedora and Ubuntu) $ compton -b --backend xrender This command make windows background transparent so it doesn't hide lower window completely. But same command doesn't work on RK3288/RK3399 board. Any idea what should be done to achieve same. Does anyone have idea if anything customized in x-server related to this?

Greetings, Can I install and boot ubuntu from an ssd was the only storage device installed (no emmc, no microsd)> iomari

I have 2 issues in LibreOffice installed by default in Armbian, running on RockPi 4B. First: special characters aren't working. Second: filenames or folders using special characters are not recognized - therefore I can't access or edit my files, and even can't save files with special characters... anyone has a tip to solve these two issues? Thanks a lot

Hi, I owe a rockpi4a which I like to reflash with a custom build dev image: ./compile.sh BRANCH=dev RELEASE=buster BUILD_MINIMAL=yes BUILD_DESKTOP=no KERNEL_ONLY=no KERNEL_CONFIGURE=no BOARD=rockpi4a Can I flash this image directly to emmc, so it boots from it ?

Hi ! I spent several hours looking for the solution, here and elsewhere, I didn't find. The Radxa wiki speaks about 2 SPI: 1 and 2 The device tree README speaks about 4 SPI: SPI 0 pins (MOSI, MISO, SCK, CS): GPIO3_A5, GPIO3_A4, GPIO3_A6, GPIO3_A7 SPI 1 pins (MOSI, MISO, SCK, CS): GPIO1_A7, GPIO1_B0, GPIO1_B1, GPIO1_B2 SPI 2 pins (MOSI, MISO, SCK, CS): GPIO1_C0, GPIO1_B7, GPIO1_C1, GPIO1_C2 SPI 3 pins (MOSI, MISO, SCK, CS): GPIO2_B2, GPIO2_B1, GPIO2_B3, GPIO2_B4 So, the correspondence seems to be: radxa SPI 1 <=> DT SPI 1 radxa SPI2 <=> DT SPI 3 With the latest kernel (5.10.12-rockchip64, Deb…

Hi! I am trying the vanilla 5.15 kernel which has support for helios64. The system is booting, disks, MMC and network are working. But fancontrol fails. It seems the /sys entries have changed and the udev rules are not working. I've tried to understand the wiki page in order to adapt the udev rules and fancontrol config file but I am a little bit lost. Is there updated versions of those config files? Kind regards, Xavier Miller.

My Sata SSD drive works very slowly on Orange PI 4, using usb 3.0 port. On PC based on Windows 11 via usb 3.0 it works correctly. I found problem on Armbian 23.02(trunk, 30.12.2022, edited parameters: installed software, bluetooth parameters) when I try move system onto SSD, first time it works normaly, but not so fast, as expected and automatically starts in read only mode. Read only mode I have fixed. Sometimes it breakes ext4 partition, that I've fixed using fsck, and fix again when ext4 breakes again and not working/works badly. After some time it begun freezing. I tried to find solution by myself, but not found good advices. I've tried some mounting parameters, …

So now I am playing with Rock64 4GB. I installed the Armbian_5.65 server edition OS and then installed xorg, lxde, and lxdm., then rebooted into a working system. Final stage of setting up was to test rhythmbox_3.4.2 and there was no sound. pavucontrol > playback shows the app is running and the worm is leaping about, but absolutely no sound. Same playing a .wav file with mpv, or indeed any player. Is there something unusual about the audio socket, or some other limitation. armbianmonitor -u = http://ix.io/ltt0

How do you control which PHY the Rock64 is going to use? Android 9 is available for Rock64 now, https://github.com/a9rock64/manifests But it is configured to use the internal PHY and I need to change it over to the external one. Is this controlled in the DTS or someplace else? It is running on this kernel: https://github.com/rockchip-linux/kernel

steps to reproduce: 1. download official stable images and extract 2. write either image (both fail in same way) to sdcard: Armbian_5.91_Nanopct4_Debian_buster_default_4.4.179.img Armbian_5.90_Nanopct4_Ubuntu_bionic_default_4.4.179.img 3. boot sdcard -> works fine 4. run armbian-config -> firmware update 5. (also tried "apt update && apt full-upgrade", same result) 6. reboot -> boot loop happens every time, either the ubuntu or debian versions of armbian. no changes made after booting beyond just doing the update. reliably boot loops (it makes it to booting the kernel, then the board restarts after a while of no output) …

Linux Hell64 5.8.17-rockchip64 #20.08.21 SMP PREEMPT Sat Oct 31 08:22:59 CET 2020 aarch64 GNU/Linux I've been testing the performance and comparing to another NAS I have (WD PR4100) and the Helios64 performance has not been fairing well. Setup are almost identical on the same switch connected gig ethernet. Using SAMBA ,NO Raid. Testing with SATA drives HD's previously formatted for NTFS. and UAS USB 8 Bay DAS. Reading from Helios64 to Windows 10 PC I achieve expected 113MB/s and from USB attached to Helios 110MB/s. Writing speeds are very poor and as can be expected worse on the directly attached USB DAS. WIN10 -&gt…

I got my box yesterday and assembled it (looks gorgeous, and reasonably easy to assemble). Without external power and with battery connected, green led 1 is on. With external power, orange led 9 in addition to that. FTDI chip is recognized regardless of power status, I can connect to the console. After pressing power button, green LEDs 2 and 3 and blue LEDs 4 and 5 light up immediately, and after that nothing else happens. Nothing on the serial console, no LEDs change status. Tried disconnecting the battery. Then without external power, all LEDs are dark (but FTDI chip is still visible), with external power orange LED 9 blinks, the rest is exactly the …

hi, I am running newest armbian for NEO3. I've noticed that when I issue poweroff command armbian shuts down correctly, but the CPU (with heatsink) remains hot. I left my board for 2 days in poweroff state and it remained 'warm' all the time. Is there something that can be done to put CPU to sleep before shutting down system (or some low power state) ?

Hi guys, I have checked the Buster image and stuck in following issue: On Rockpis, tty2 and (the only working) spi2 sharing the same PINs. Due to this reason, SPI is not functional . from dmesg: [ 1.598230] rockchip-pinctrl pinctrl: pin gpio1-22 already requested by ff0c0000.serial; cannot claim for ff140000.spi [ 1.598269] rockchip-pinctrl pinctrl: pin-54 (ff140000.spi) status -22 [ 1.598287] rockchip-pinctrl pinctrl: could not request pin 54 (gpio1-22) from group spi2-miso on device rockchip-pinctrl [ 1.598304] rockchip-spi ff140000.spi: Error applying setting, reverse things back I try to switch back tty2 to tty0 in dts and also…

I deal with a problem I cant solve with installing my usb printer Samsung ML-2160. CUPS recognise it but it doesn't have the exact driver (it recomends ML-2152WPS I think, but it doesn't work as I cant print anything after the the installation) I tried from HP download directly a ULD but when I try to run the install.sh it gives a message about ARM architecture expected (although there is a directory for ARM architecture under the install.sh file) Any ideas?

Orangepi 5B 1. The armbian with sd card can not detect orangepi 5b emmc disk 2. with orangei5b official image and boot , write the armbian image to emmc , can not boot into UI desktop and drop into inicramfs shell.

Hi, I try to get my NanoPC-T4 a second life. Therefore I want to (re-) install Armbian but I'm stuck Andi don't know why. I uses USBFlasher to flash the minimal Armbian on it (tried compressed and uncompressed) but the green blinking light indicates me, that he found no bootable device. I tried different images as well. Also differen SD cards, even DietPi image, always the same. The only thing which runs instant is one of the eflasher Images of FriendlyARM. I also tried to change the image that the eflasher writes to the eMMC (by copy the uncompressed .img file to the SD card and renamed it to armbian.raw and changed the config file as the wiki said)…

I would like to reset USB power for some reasons. Now I'm using NanoPi M4 and "uname -a" returns the following I was wondering if I could power off/on of my USB device with commands, and found people are doing it with different PCs like topic below Is this possible with NanoPi M4? and if possible, how?

First time user here. I got a Rock64 board and flashed Armbian_20.08.1_Rock64_focal_current_5.8.6_desktop.img using Etcher to an SD card. When I try to boot, nothing happens. If I examine the SD card on my Linux PC, there is only one partition on it and it appears to be a kernel image. I assumed that the .img file would have the U-Boot partition as well. Is there a different type of image file I should be using that would contain everything that I need to boot? If not, how do I create such an image?

IT'S FINALLY HERE... THE OFFICIAL ROCKCHIP-LEGACY MULTIMEDIA INTEGRATION After two years of using a separate script to enable the multimedia features in RK3399 Legacy Kernel, the whole framework has been incorporated to the official Armbian packaging system. The choice distro for this integration is Debian Buster (see FAQ at the end of this post about the reasons). I. Installation Download a Armbian Buster Legacy Desktop image for your board, and install it with the standard Armbian method. Install the complete multimedia solution with sudo apt update && sudo apt upgrade sudo apt install media-buster-legacy-rk33…

I am using native camera ( NDKCameraManager2 ) in c++. I wanted to know whether rk3399 supports camera2 HAL3 with LEVEL_3 or not? 我在c ++中使用本机摄像头（NDKCameraManager2）。 我想知道rk3399是否支持LEVEL_3的camera2 HAL3？

Has anyone been able to build ZFS/SPL?: checking linux distribution... ubuntu checking default package type... deb checking whether rpm is available... yes (4.12.0.1) checking whether rpmbuild is available... yes (4.12.0.1) checking whether spec files are available... yes (rpm/generic/*.spec.in) checking whether dpkg is available... yes (1.18.4) checking whether dpkg-buildpackage is available... yes (1.18.4.) checking whether alien is available... yes (8.95) checking spl config... all checking kernel source directory... /usr/src/linux-headers-4.4.115-rk3328 checking kernel build directory... /usr/src/linux-headers-4.4.115-rk3328 checking kernel …