General Chat

Because the device tree problem, Ethernet did not working under Armbian 4.19.x. The correct device tree as follow, this will make the T95Z Plus Ethernet working: // SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2016 Endless Computers, Inc. * Author: Carlo Caione <carlo@endlessm.com> */ /dts-v1/; #include "meson-gxm.dtsi" #include "meson-gx-p23x-q20x.dtsi" / { compatible = "amlogic,q201", "amlogic,s912", "amlogic,meson-gxm"; model = "Amlogic Meson GXM (S912) Q201 Development Board"; }; &ethmac { phy-mode = "rgmii"; pinctrl-0 = <&eth_pins>; pinctrl-names = "default"; reg = <0x0 0xc9410000 0x0 0x10000 0…

Hello! I am a novice on this forum. My device is the new (so far) X96 MAX. Now I am preparing to install on it the latest Armbian-ubuntu. My X96 MAX is with S905X2 chip, 4GB of RAM, 64GB of storage, gigabyte ethernet, dual-band wifi adapter. Please help me with some tips for this operation!

M9Plus 4k TV Box - An Exercise in Futility? My apologies for the verbosity of this post. I have an Android box marked M9 Plus 4k on the top. It was given to me, as a gift. There are no other markings on the box, and the user manual that came with it is all but useless. There is no web site listed, and no way to find out who made the thing. Tech specs are listed below. After playing with the Android and a bunch of apps from Google, for about 3 months, I finally got around to doing the sensible thing, and switched it over to Linux. Specifically LibreELEC. The only issue was the dtb.img file for the 1G Ethernet did not work pro…

Hellow there, I installed Armbian_5.67_Aml-s9xxx_Ubuntu_bionic_default_4.19.0-rc7_desktop_20181117 to my Phicomm N1 box and found that the WIFI/Bluetooth is not available. Anyone can help me install the drivers? ____ ___ / ___|/ _ \__ ____ ____ __ \___ \ (_) \ \/ /\ \/ /\ \/ / ___) \__, |> < > < > < |____/ /_//_/\_\/_/\_\/_/\_\ Welcome to ARMBIAN 5.67 user-built Ubuntu 18.04.1 LTS 4.19.0-rc7-aml-s9xxx System load: 2.45 1.19 0.57 Up time: 9 min Memory usage: 16 % of 1844MB IP: 192.168.9.46 CPU temp:…

Hardware : Amlogic S905X , 3x22650 battery, SIM, EMMC SEC 8Gb, RTC with battery, AP6255 WiFi, 4G modem QUECTEL EC25-EFA-512-STD, IR, opt ZigBee Q: Please help me choose a Armbian image to write to the flash EMMC or mSD thanx in advance

Hi Guys, i am owner of this box and i wanted to ask you if anyone is intressted in getting armbian running on it. Dissasambly does not look to be a big problem. and here are som pictures: https://forum.freaktab.com/forum/tv-player-support/allwinner-tv-players/679476-beelink-gs1-6k-tv-box-allwinner-h6-android-7-1-bt4-1-1000m-lan-usb-3-0-media-player-2gb-ram-16gb-rom from the pictures i cannot tell were the uart pins are, anyone can ? from user froezus post Hi, I have tried to boot the OrangePi One Plus image on my Beelink GS1, but either the UART is bad configured or I have damaged the TXD p…

Image: Armbian_5.41.1_S9xxx_Ubuntu_xenial_3.14.29_mate_20180421.img.xz Status: all working except adding tc rules john@amlogic:~$ sudo tc qdisc add dev wlan0 root handle 1: prio RTNETLINK answers: No such file or directory john@amlogic:~$ sudo tc qdisc add dev wlan0 parent 1:3 handle 30: tbf rate 1024kbit latency 50ms burst 1540 RTNETLINK answers: No such file or directory john@amlogic:~$ sudo tc filter add dev wlan0 protocol ip parent 1:0 prio 1 u32 match ip dport 17500 0xfc00 flowid 1:3 RTNETLINK answers: Invalid argument We have an error talking to the kernel john@amlogic:~$ sudo tc filter add dev wlan0 protocol ip parent 1:0 prio 1 u…

I got a box a month ago off Amazon. Externally its labeled "MX Pro+ 4K" But it is running with 7.1.2 and the firmware I have flashed was a MXQ. The board says MXQ_S905X_D4 v1.2 and I have tried both SD and USB, it is going into uboot I think? (The light is red not blue) but I can't find a dtb that works. There is no display coming on when its trying to load from the uboot. I did mess up the firmware and was able to flash it using usb burning tool Any Ideas on how to make this work????? I messed up the original firmware and bricked it and had to short pins and reflash it with the firmware I could find but I would really like to know more about this box and how to get Linu…

Hello everybody, I would like to install Armbian on my Trongle X3 (Android 6 TV box, S905X 64bit CPU, 1 GB RAM, SoC board with HDMI/Ethernet/2 USB/1 microSD/IR/WiFi connections). Is there a safe way to migrate from Android to Armbian and back, eventually? I will only use this device for streaming video purpose. I haven't important things on its internal memory (8GB). Thank you.

Dears, Can somebody help me to learn how boot process ongoing on s905w (i.e. tx3-mini)? I want to add support for s905 in my project (basically it is build from scratch just enough os for mythtv). My target is to use as much as possible mainline kernel/u-boot/v4l2-m2m etc. So how should I organise sw/scripts to allow booting mainline kernel on s905w? thx in advance!

Can someone please validate the steps I am going to do is correct or does it need any changes. Please experts let me know if any changes is required to the below steps. https://github.com/150balbes/Amlogic_s905/wiki Root of s9xxx (S905 S905X S912) https://yadi.sk/d/srrtn6kpnsKz2 https://yadi.sk/d/srrtn6kpnsKz2/Linux/ARMBIAN/5.64/20181019 Step 1: From the above link download the file Armbian_5.64_Aml-s9xxx_Ubuntu_bionic_default_4.19.0-rc7_desktop_20181019.img.xz Step 2: Unzip file using 7zip in windows 7zip => Armbian_5.64_Aml-s9xxx_Ubuntu_bionic_default_4.19.0-rc7_desktop_20181019.img.xz = Armbian_5…

I've just bought A5X max Box with RK3328 and 4Gb Ram. It seems to run the latest sw that i've found really full of stupid bugs. Anyway, the most important issue is that AMAZON PRIME VIDEO does not work at all. It seems that this is due to DRM related problem Can you suggest me any solution (if any)? Here the build Ver. 8.1.0 Latest Patch 5th july Kernel version: 4.4.120 BUILD RK3328_box-userdebug 8.1.0 OPM6.17019.040.b1 KIND REGARDS

Hi, I've just tried mainline kernel 4.19 with my two TV boxes and first impression is wow! it works! It's faster than expected! Thanks! With Magicsee N5 I can't access the internal eMMC. I use factory bootloder, meson-gxl-s905x-p212 dtb, released 4.19 kernel. I got: root@lepotato:~# dmesg|grep mmc [ 0.000000] Kernel command line: console=ttyAML0,115200 root=/dev/mmcblk0p2 [ 0.979648] meson-gx-mmc d0070000.mmc: Linked as a consumer to regulator.2 [ 0.985812] meson-gx-mmc d0070000.mmc: Linked as a consumer to regulator.1 [ 0.992676] meson-gx-mmc d0070000.mmc: Dropping the link to regulator.1 [ 0.999184] meson-gx-mmc d0070000…

Hello, I have tested a lot of tv box to decode video, and lot use special kernel of vendor ( the kernel provide by android 3.14 ... ) with not completely opensource solution. And a guy (maxime jourdan) have make an "hack" of the amlogic, and use V4L2M_M2M to make the amlogic hardware decode with new kernel ( patch in 4.19 if i remenber ). It's not perfect ( the performance is poor than the special kernel ) but it's works and it's not a vendor solution and completely opensource . And the guy explain it : https://www.youtube.com/watch?v=pF6i19oscqg In english i can understand It's a french guy It's my new hero ...

I have a samsumg evo sdcard, one of the tops in performance according to So trying this with very slow sd cards probably wont produce a benefit Im using balbes 5.55 armbian I installed a swapfile with 2G , with sudo apt-get install dphys-swapfile sudo vim /etc/dphys-swapfile look for #CONF_SWAPSIZE= and change for CONF_SWAPSIZE=2000 then restart the system or sudo dphys-swapfile swapon It can take seconds (in my samsung evo) or 20 minutes (on an old kingston and raspberry pi running raspbian), so dont worry if it takes half hour the fir…

hello, I managed to install Armbian on an android box. but I can not have a sound I wanted to know how to find the driver to install. thank you

I installed Armbian_5.60_Aml-s9xxx_Ubuntu_xenial_default_4.18.7 to the EMMC of my s905x TV Box , so far so good . Yesterday I trimmed some drivers and built the kernel successfully . The following packages are generated with armbian build tool : linux-dtb-aml-s9xxx_5.60_arm64.deb linux-headers-aml-s9xxx_5.60_arm64.deb linux-libc-dev-aml-s9xxx_5.60_arm64.deb linux-image-aml-s9xxx_5.60_arm64.deb linux-source-default-aml-s9xxx_5.60_all.deb I am going to ssh into my box and run "dpkg -i " commands to update kernel . Is it safe to do so while Armbian is running ?

Hi team, I want to install a 3G USB modem from Huawei exactly the e173 one in a Nexbox A95X 1/8 TVBOX, I can see the modem is on modem mode in lsusb, but I cant get work that modem. I can't see the serial ports that supposed to be in /dev/ directory, can you help me?

Well I was using clockworkmod program for my intel/linux desktop. I did not have any luck compiling it on the tv box. Can someone recommend a cheap plan B for connecting via 4g? There are a lot of USB dongles out there and I am not sure which is going to work out smoothly. Thanks ahead of time.

I am trying to load armbian server with a mainline (at least 4.9) linux kernel on my s912 box. I currently have a the 3.14 linux Kernel running fine. The mainline images on yadidisk dont seem to have as many dtb files as the image i used and they dont run anything. Steps I have tried: factory reset and load image factory reset and copy dtb files from 3.14 image and load image copy the autorun zip files and load image. i do not get any action on the 4.9 images or the 4.18 images but i can reload the 3.14 images is there any other method to try?

sudo: /usr/bin/sudo must be owned by uid 0 and have the setuid bit set That kind of problem. Option 1 Control + Alt + F3 log in as root and live without sudo Option 2 Open a terminal ssh root@127.0.0.1 and log in as root Option 3 copy this to a file named /tmp/armbiansudo.txt chown root:root /usr/bin/sudo chmod 4755 /usr/bin/sudo chown root:root /usr/lib/sudo/sudoers.so chmod 4755 /usr/lib/sudo/sudoers.so chown root:root /etc/sudoers chown root:root /etc/sudoers.d /etc/sudoers.d/README /var/lib/sudo And now follow option 1 or opt…

https://www.cnx-software.com/2018/09/23/realtek-rtd1296-u-boot-linux-source-code-rtd1619-cortex-a55-soc/

To start the system enough to download, unzip, burn the image to the SD card. Connect the SD card to the EDGE and turn the power on. The system starts automatically. Details on the initial setup of the running system can be found in these topics. https://yadi.sk/d/ie_dx5x_w2xUIQ https://mega.nz/#F!n1hihSKT!8kYublAPG4RtwSIBihOkVg

Hi Guys, I also want to run my TV box with linux (Armbian). To install IObroker. It worked on the SD card. About Armbian I flashed the EMCC again so I do not need an SD card anymore. After a reboot, nothing worked anymore Armbian on the EMCC also not on the SD card. Connecting via USB to the PC does not work either. Can I flash it all over RX and TX? Does one have an idea? Thank you

I went to https://archive.raspberrypi.org/debian/pool/ui/r/rpi-chromium-mods/ and then wget https://archive.raspberrypi.org/debian/pool/ui/r/rpi-chromium-mods/rpi-chromium-mods_20180910_armhf.deb after that control+alt+F3 and logged as root apt-get update apt-get install chromium-browser:armhf dpkg --force-all -i /home/user/rpi-chromium-mods_20180910_armhf.deb vim /etc/chromium-browser/customizations/00-rpi-vars look for change it for if you want to put the last version, you can look the number here https://get.adobe.com/es/flashplayer/ …

I am trying to build from Balbes Amlogic github source, it starts the process, but i got 2 errors, error in function compile kernel (compilation.sh:404), failed moving kernel DEBs. There's a line of code mv: missing destination file operand after 'home/khadas/build/output/debs/'. I am doing this on Lubuntu xenial, trying to build 16.04. xfce with mainline kernel, by the output in terminal it looks like it 4.19 rc3 kernel, am i missing some packages or do i need to edit some config file?

Hi, I've compiled u-boot from source( I have the binary u-boot.bin.sd.bin file) now how can I boot this binary? I don't want to erase the vendor u-boot on the emmc and replace it with this, I want a way to boot into this binary for testing without writing it to emmc. Is this possible? My device is k2pro tv pro ( amlogic S905 SoC) Regards

Ok fairly new to ARMBIAN.... Possibly 3 hrs in. I have it running on an MXQ media box, all fine but no wi-fi... Put in an old D-Link DWL-G122 usb stick and whilst it's recognised by the usb sub system no driver gets loaded. I have installed armbian-firmware-full and there seems to be relevant firmware for the RALINK devices. but iwconfig does nothing and the device does not show up in "nmtui" I have to admit it's probably 13-14 years since I had to manually do anything with a linux driver so I am rusty! Any ideas? Cheers TT

Hello, I am looking for a cheap SoC (less than 15$ per SoC) that has the most efficient HW based h.264 encoder. I want to transcode multiple 1080p (6-12 mbps bitrate source) TS streams. I will probably use couple of those SoC's. I was reading about Allwinner V3S (~3$ per CPU) based SoCs but can't find any cheap one for sale based on that chip. Also I don't really know what kind of performance this cheap have for HW h.264 encoding. Anyone have any experience with HW 1080p encoding on SoCs? Any suggestions?

I have a E-Z STREAM TI8 box, I have managed to boot from armbian but the installation cant execute as my mmcblk1 is not setup according to the script. This is how the partitions look like mmcblk1boot0 mmcblk1boot1 mmcblk1rpmb. Is there a risk for me to redo the partitions and run the install script? As I see it if I do this it could brink the box. I also tried to extract the dtb from mmcblk1boot0 without any luck... anyone that has a good howto for this?

If you dont need GPIO then you are probably better off looking at TV boxes or boards intended for that market instead of an SBC. That market is starting to see PCIe and USB3 attached 4x4 wifi chips and at very cheap prices. I brought back some dirt cheap RK3399 TV box boards back from China in June with AP6255 (2T2R) chips that perform much better than expected as an AP for upto 5-6 simultaneous clients. I get approx 425Mbps with 1 client, ~295Mbps with 3 clients and ~165Mbps with 6 clients. Thats line of sight in a ring approx 3 meter radius around the AP. I also get 890Mbps on the GB port on boards that cost me about €35 each (¥27500 for 100 boards) ¥275 / …

Hello. I have victsing vitv-2 android tv box based on rk3368 processor. I want to try to install some sort of linux on it. So, my question is: is there any chance armbian will support this processor? I see some other rk32*/rk33* are supported...

Hi! I have an Nexbox A96X Android TV box is it possible to install a distro linux ARM bian or Ubuntu? Thank you and I await your answers.

Hello Everybody, i bought a Xoro HST 260, which is normally a Android TV Box. But I dont need it, so I want to make a OMV out of it. But the performance from the SD-Card is terribly. So I wanted to Install the ARMBian to the NAND but the script fails. I Use the ARMBian Version 5.55 and a HC10 Class 1 SD-Card with 32 GB Here as much Information I can give you: AMLogic S905x 2 GB DDR3 RAM 8 GB NAND / eMMC 1 GBit RJ45 IR-Receiver 2 USB 2.0 Slot 1 SD-Card Slot The Device bootup when I use the "dtb-4.18.0-aml-s9xxx\meson-gxl-s905x-p212.dtb" file or the "dtrb\meson-gxl-s905x…

Hello all, I buy an another box tv ( ... do not laugh please ... it's only my 3 .... ) A K3 pro with S912 aml soc ( 8 cores = 4c a53 at 1.5ghz plus 4c a53 core at 1 ghz, 3G Ram and 16 G Flash ) with a DVB T2 and DVB S2 tuner ( find promotion at 60 $ ) I play with android 7.1.1 and use ffmpeg , i make an transcode : ( French Channel M6 in DVB T2 in 1920x1080 ) ffmpeg -i http://192.168.1.50:8001/+1:0:19:401:4:20FA:EEEE0000:0:0:0 -s 320x240 /tmp/test.mp4 and speed ( without hardware decoder / encoder , only software ) give : Speed 1x !!! ( my other S905W with 4 cores in same test give Speed 0.65 ) So test last libreele…

Hi, I've a small amount of linux knowledge... enough to be dangerous but not enough to understand fully what's going on. I'm learning slowly but have reached a frustrating failure with my A95x revision 2 set top box. It's running "ARMBIAN 5.41.1 user-built Debian GNU/Linux 9 (stretch) 4.17.0-rc3-next-20180430-amlogics905x" I have a behringer UCA202 USB soundcard - it uses standard texas instruments chipset so should just be plug and play. But there's a gap in my knowledge and in the process of getting the soundcard to detect within Armbian. lsbusb outputs.... Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root h…

Information in this topic is very outdated see this topic. The start system in Coreelec is not compatible with LibreELECE Armbian etc. If you run coreelec on your TV box, you will no longer be able to run LE and Armbian normally until the full recovery of the standard firmware via the USB Burn Tool and the new activation of the universal multi-boot, which is used in all new systems. The new version 5.55 of images. In this version, images with a single DE (XFCE) and a server in composition are as close as possible to the official versions. Version with a Mate and Icewm will probably be later and the gathe…

I buy a V88 mini 3 (2G ram / 8G EMMC) for make the test of MPP api and use it in ffmpeg. ( because i must wait for the version with amlogic ) 1 Install Armbian 2 Checkp MPP 3 Compile last ffmpeg 4 Test So let's go ...

Hi folks, I'm currently running @150Balbes "Armbian_5.27_S812_Ubuntu_xenial_3.10.99" on a S812, but with some minor issues. Ethernet only 100Mbits (Realtek 8211F). Kernels newer than 3.10.99 won't boot (but will try to determine why, when I get my UART Adpter.) So after all, I'm thinking to replace this box, with a more current one. Purpose of this box: running an "Emby-Server" with external HDDs and probably "Pi-Hole". Which box is recommendable for these purposes? thanks in advance

Hi, new to armbian here! I'm coming from libreelec looking for a less limited operating system keeping mediacenter features of libreelec (mostly kodi) I installed Armbian_5.44_S9xxx_Debian_stretch_3.14.29_server_20180601.img.xz (it boots only versions with 3.14 kernel, others don't work), I found that it has not wifi drivers because it is not working, just eth0 is shown with "ip a". Is it possible that drivers for this box are missing? With libreelec it works like a charm. Thanks in advance!

I have been happy user of Vscission V88 Piano board for some months running Armbian and ZFS, but yesterday after some trouble rebooting like 20x after the box hang during an attempt to clone a Corsair 32GB USB drive, i can't get it to boot Armbian any longer! I've verified i'ts' not the SDcard nor the content in it (correct dtb.img etc) and i even downloaded another image from dl.armbian.com and tested a new SD card with no luck. It boots Android just fine when SD card is not inserted, but when inserted i see a red light and nothing on the screen. Sad since this one has enough RAM to run a lot of stuff. What could this be?

The official git armbian\build adds the tvboxes test branch. Everyone is invited to participate in the development , testing and maintenance of different models of TV boxes. https://github.com/armbian/build/tree/tvboxes

what difference between armbian and debian Linux Sent from my Redmi Note 4 using Tapatalk

Hello First of all, amazing project overall, it's incredible to see what we can do already. I have Armbian running on a Sunvell T95Z Plus (3gb RAM, 32GB storage) and it's working fine overall, there just seem to be a few things that could be better and I would need to help to progress : - The video driver doesn't seem to be optimized, playing a video, kodi or youtube shows a lot of tearing. My dtb is t95z-le9-dtb.img My distribution is Armbian_5.44_S9xxx_Ubuntu_bionic_3.14.29_mate_20180721.img I got both of them from scouring the forum. How can I update the video driver to the latest or most adequate one ? - The network card seems…

Hello, i installed the newest ubuntu img on the box(aside on the sd card running). Now i get through the setup questions for logon. Only error i get is that the logon server doesn't work well. Anyway it boots now saying 'light display manager' started successfully, but there's no graphic gui to be seen. All the control f buttons don't work, or i get a scrambled screen but no gui. Can someone tell me what i can do to get into the graphic user interface? I was already doing the putty logon thing.

I'm trying to building a freepbx server on my tv box. Anyone have a debian 8 or ubuntu 14 image Armbian for s905x devices? Thanks for your helping !

Hi guys, I was wondering whether the image for, e.g., the Rock64 can be expected to work also on a TV-Box with RK3328 chipset, for example this one? Cheers, chessplayer

Hello, My OS : Armbian_5.44_S9xxx_Debian_stretch_3.14.29_server_20180601 My Devise: X96 mini ( 1 G Ram 8 flash + SD 16 G sdcard ) I want to use hw codec of the aml with ffmpeg So i find https://github.com/roman-rybalko/FFlmpeg-aml/ so i try to compil : AML_LIBS git clone https://github.com/Owersun/c2_aml_libs.git cd c2_aml_libs make all -j4 make install cd .. copy all files from /usr/lib/aml_libs/ to /usr/local/lib (or change the path of the install ) cp /usr/lib/aml_libs/ld.so.conf /usr/local/lib/ld.so.conf cp /usr/lib/aml_libs/libamadec.so /usr/local/lib/libamadec.so cp /usr/lib/…

Its CPU is rk3328.It only costs $18.

Hi, I am working on support for running Armbian on the RKM MK39 (based on the Rockchip RK3399 SOC) Strange issue with uboot and I'm wondering if others had encountered the same thing on other RK3399 devices with eMMC I have successfully compiled the kernel and uboot from Rockchips SDK at http://opensource.rock-chips.com/wiki_Linux_user_guide Uboot loads but thats it, it seems like it can't find the kernel on my eMMC. Here's what happens on the serial console: Any ideas?? Spoiler U-Boot 2017.09-01593-gd80d7b5 (Jun 19 2018 - 14:39:51 +0800) …

Hi, So I have an MXQ S805 box. I installed Armbian_5.44 S805 Debian Server on SD card, got the right DTB to work and its working well. I have run the install.sh file to install to NAND and that has gone well too However, when I reboot, it goes into a weird loop that basically does not allow it to boot right. I encountered this loop previously when I was trying to identify the right DTB for my box, so I am confused that much more. What am I missing? Help. Thanks.

i have a tv box mxq pro 4k, i installed Armbian_ubuntu_xenial_mate_2018, and have a problem with display on desktop. i dont access into desktop, must access by CLI, then query armbian-config -> -> switch lightdm ..... so i just to desktop. how do i do to access desktop when boot, not must step above ?

Hi, I installed an Epson TM-T20 II without problem using the armbian image for z28 tvbox, rockchip rock64 alike board. When I plug it, it creates a /dev/usb/lp0 port that is enough to make the printer work. But I am unable to get the same working on the amlogic images. No port is created when I add the USB printer. Could it be missing UDEV rules? Or usblp driver not being loaded by the kernel? May someone give me a light? Those boxes are optimal for POS installations, and no support for ticket printing is a handicap. BTW, awesome work with all this project, it helped me a lot.

I bought a tx3 mini 2gb/16gb s905w chip, may i know how i can run ubuntu mate in this tv box? sorry newbie here.

Can armbian run on MINIX NEO U1? thanks

I have used the Armbian images created by Balbes150 on my VIM2 Max. Awesome software in all respects. If I use an image with the 3.14.29 kernel: 1. Framebuffer is correctly installed/configured 2. HDMI does not exist 3. Displaying EDID reported: No EDID on bus 1,2, or 4 Bus 3 doesn't really have an EDID... Couldn't find an accessible EDID on this computer However, if I use an image with the 4.16.1 kernel: 1. No framebuffer 2. HDMI detectable connected/disconnected 3. Displaying EDID detected contents correctly I wouldn't mind a 4096x4096 framebuffer so, if necessary, I can …

Hi I managed to get armbian on my Amlogic S905W device. I'd like to run the whole root fs on an external usb device (ssd). I know how to format it to ext4, mount it, but I can't manage to boot linux on it : I tried to modify the /etc/fstab file, but it seems that it's not the good place ? Perhaps a file in /boot ?

Hello, I am starting with this beautiful box which seems in good condition. It boots from eMMC with the tcbox soft and I succeed to boot it with armbian 5.44 on sdcard after some hours on google. Unfortunatly I an stuck on two issue to progress 1) I would like to transfert now the sdcard config on emmc to avoid sdcard issue (I don't care about the tvbox soft) or at least use the emmc for storage and avoid the reliability issue od sdcard my linux does not see the emmc device , perhaps a dtb issue ! 2) the syslog is very quickly flood by : Jun 1 17:31:59 localhost systemd[1]: serial-getty@ttyS0.service: Service…

I've been trying to activate the framebuffer on a Armbian Debian-server image. The framebuffer doesn't exist on a server image but I need to be able to install it. So I thought, what about DirectFB. I've been searching the web for instructions on installing DirectFB. I need to install it and not have to burn a new image (I'm not capable). I just noticed that if I go to /boot/debian i find all the libdirectfb files. Can somebody show me (step by step) how I could install DirectFB or directly activate the framebuffer using these files? What files (including directories) to install, scripts to modify, etc. Any help would be…

Hi, This SOC is very interesting as it has a native SATA interface and Gigabit Ethernet. The boxes equipped with it (Zidoo X9S, X10, Xnano X5, Beelink SEA 1,...) can be used as a NAS because they have OpenWRT inside/with Android but it is rather limited. I'd like to use my SEA 1 with OMV under Armbian but is it possible to have dual boot on these boxes like S905x ones ?

Hi, I spend two days trying to get the wifi dongle Dlink DWA-131 rev E1 working, but there is no way. I am running armbian ubuntu in a z28 pro (rock64 like) Could someone give me any help? Tks

Hi I would like to install armbian on my Mecool M8s pro w which has an ARM-Cortex-A53 (Amlogic S905W) processor. Would anyone be able to please let me know how to do this or give me a broad idea of steps I should take as a beginner? Thank you Fred

booted up fine and then a green screen came up and then I couldn't do anything it's like the thing locked up. So I unplugged it and the screen came back on and then went back to the green screen. Maybe I got a bad ua any help thanks

Title says all. Please see here my comment (#5) from 1 day ago...can't find a reference on this site: https://www.cnx-software.com/2018/01/24/mainline-linux-on-amlogic-s905-s905x-s912-soc-2018-status-update/ So: 1. Is there any Armbian wiki or update summary that tells us about progress on video acceleration support ( specifically for Kodi video streaming) and Mali GPU hardware support under Ubuntu desktop? 2. Does Ubuntu desktop Armbian distros support SMP multi core processing for this Amlogic series? 3. What does it mean to say, e.g., that a S905X/W Android Box (e.g., A95X, MXQ Pro) supports 4K@60/30fps? Does …

When building An armbian image, it takes a lot of time to create u-boot and I want to understand how it is necessary to include u-boot in the image immediately. If most people don't use it, I'll disable copying it to the image when I build it. For those who will need the image with the embedded u-boot, it is possible to easily add the right version of u-boot into the existing image.

Hey everyone, I am newbie to linux. I have loaded the armbian 5.14xx image in NAND Flash through nand sata install.However wifi is not working. how to fix this issue? I already used modprobe rtl8192cu command but it does not work.

Hi, I am posting from work, so do not currently have access to my MXQ box, meaning what I am about to explain is based on last nights attempt at running Armbian from a SDCard I will try to be as detailed as I can.... I have been following a tutorial at the MXQProject website in order to install the Mate Armbian distro (5.41) onto a MXQ / S805 Android box (although I have chosen to use the XFCE distro instead). All seems to goes well, until I get to the first Armbian login prompt (the bit where I enter 'root' as the user and '1234' as the password). As I understand the MXQProject tutorial, after successfully loggi…

Hello everyone, I am new to the forum and I am trying to convert a TV Box M9X Max (Android 6.0.1) into Mate. Due to a handling error, I erased the Rom from the Box ... I did not find the Rom of the Box M9X Max, but that of the MXQ Pro + works correctly (Android 7.1.2). I'm using the image: Armbian_5.37_S9xxx_Ubuntu_xenial_3.14.29_mate_20171226.img The problems I encounter: - Wifi is not recognized, chip: HS2734A V15628 98MA (Broadcom 4329/30) - I can not write the image on the eMMC: Android restarts in recovery mode - The Box's remote control does not seem to work to turn the Box on and off I browse the net for 2 weeks and I ca…

This is a quick notes post for people that want to setup Armbian on AlfaWise H96 Pro+ eMMC and use it as a Headless Server for Docker Microservices Thanks to @balbes150 @guidol and @Jeycop and all the awsome people of this forum Tech stack used Armbian - Java 8 - Docker - Spring Framework/Boot 2.0 - Node Js - Aurelia Freamework Download Files - Android firmware (Optional, required in case of revert from eMMC flash) - New H96 Pro Plus 7.1.2 firmware download By EBox - Armbian Version Armbian_5.41_S9xxx_Ubuntu_xenial_3.14.29_server_20180305.img …

Hi to all, I recently purchased a COOLEME brand tvbox (but internally is marked W95T) with S905W, 2GB / 16GB of memory. The wifi chip is SV6051P. I tried to install ARMBIAN Armbian_5.37_S9xxx_Ubuntu_xenial_3.14.29_server_20180203.img and it works all very well except WIFI. I tried several DTBs, both gxl212 and gxl281, I also tried to modify them but I could not make the WIFI work. I saw that in the folder / lib / firmware there is a subfolder SSV6051 that contains a .bin file and a .cfg but I have no idea how to load them. Among other things I tried to install LibreElec and the wifi in that case works ... But I'm interested in Linux because I intend to use t…

Hello everyone I'm posting here what I did to run Armbian on a 4G LTE EM90 box. The image I'm using is armbian_5.37_S9xx_Debian_stretch_3.14.29_icewm_20171226. I extracted the dtb.img from the rooted android, I had to remove the beginning of the file to make it work. If you don't cut the file until you reach 0xD0 0D FE ED, you will get a magic number error when decompiling and Armbian will not boot with your fresh DTB. WIFI : The wifi is not well initialized at startup. You must precise to modprobe the firmware to load to AP6330 WIFI + BT4.0 chip Create the file /etc/modprobe.d/options.conf and add the following line : options dhd fir…

Hello, First, thanks everybody here for making this possible. Second, I am a newbie on booting Linux on TV box, so bear with me. Thanks. My problem: I have a MXQ Pro+ 4k (2GB RAM - 16GB storage - Android 7.1.2 - 64bit) box and have tried most of the recent images for x905s based TV boxes, following the instructions on the first page of this topic. I have a semi-workable result using Armbian_5.37_S9xxx_Ubuntu_xenial_3.14.29_mate_20180203, but still it is not really usable. I wrote this image to USB 3.0 stick and booted after updating via local update on Android. After setting user I can only access desktop after typing ctrl+alt+f1 -> l…

Greetings! I have an S905 based TX3. I have not really heard much at all about this box. I hear about the S905W based TX3 and another S905D based one if I recall but this is NOT THOSE. This is a black box with Ethernet, WI-FI, Remote Control, A/V headphone jack plug, SPDIF Fiber Optic out, 2 USB ports, a micro SD slot and HDMI. It's just a TX3, not a TX3 PRO or a TX3 MINI. And just a plain S905. Here are the components on the board: WHITE STICKER: TX3 95*18 BOARD ID (I ASSUME): 94V-0 XZG-P2 E246887 MODEL ID (I ASSUME): CS_905TX_V1.0 20160517 CPU: AMLogic S905 CPU J-TNC015.00 C0FQPN00412 Rectangular chip says: S16037 G 1636 ROM (I ASSUME): …

Ayufan’s Armbian on a V88 Piano or V88 Mini III These two TV boxes seem to be electrically identical except that the V88 Mini III has 2 GB RAM and 8 GB ROM whereas the V88 Piano has 4 GB RAM and 16 GB ROM. They use the same PCB as can be seen from the photos in these FreakTab topics:- - http://freaktab.com/forum/tv-player-support/rockchip-based-tv-players/rk3328-devices/681869-scishion-v88-piano-tv-box-rk3328-4gb-ram-16gb-rom-android-7-1-usb-3-0-fast-lan - http://freaktab.com/forum/tv-player-support/rockchip-based-tv-players/rk3328-devices/663248-scishion-v88-mini-iii-tv-box-rk3328-2-8gb-2-4-wifi-fast-lan I do not have a V88 Mini III to te…

Hello to all I am trying my best to install Armbian ubuntu server on the above described Android TV box and cannot succeed. has some one been able to make this work? Any hints would be greatly appreciated!

Hi, I own a mxq pro 4k 2gb ram, 16 gb emmc. Yesterday evenning i installed armbian on it. Linux amlogic 3.14.29 #150 SMP PREEMPT Tue Dec 26 16:55:23 MSK 2017 aarch64 GNU/Linux On sd it was ok only with mxq_s905.dtb file, so i writted on emmc But this evening my box is very slow, long time to have an answer on ssh terminal. I tried to reboot... with TOP cpu is 2% charged/occupied...nothing what should i checked? Thanks A frenchie

Hello to all; These are VERY exciting days for me as I installed ARMBIAN 5.37 on my s-805 MXQ box and its running beautiful! Thanks for all that made it happen. There is but one issue where I need some help: Running ARMBIAN 5.37 user-built Ubuntu 16.04.3 LTS 3.10.99, the system is unable to find my wifi adapter. Any help in how to fix this would be greatly appreciated. Eddy_T, Calgary, Alberta, Canada

I'm running armbian on a X96 and was able to install it to the eMMC. So far no problems. The machine has 8 GB of eMMC, and that's why I want to use every free space if possible. But the partition table looks quite strange. Here is the output of cfdisk: The extended partition p4 ends at block 11567103, but p15, which is part of p4, ends at15269887. I was not able to fix this with parted's resizepart command. The resulting new partition table was not written to the eMMC. Any ideas how to fix this? p15 contains armbian, which runs fine in this configuration. Nevertheless I would like to delete unused partitions and enlarge p15. p14 could be a cand…

Hi All, I have bought an android tv box (H96 MAX) with rk3399 inside. I want to install ubuntu on it and have access to mali gpu as well. Is there a version of ubuntu (with desktop-GUI) stable or unstable that I can use. Thank you in advance.

guys i bricked my box and couldnt find recovey files.can any one pm me or post recovery files please. thanks in adavane.

hello there, i bought this box wich is pre rooted! i burn the image to usb, and also copy dtb.usb image to boot directory but i dont seem to be able to get into linux! I go into update and select the linux script and it reboots, but it shows an android figure saying " error" and then i have to restart back to android.. im trying to boot armibian or ubuntu or similars... So anyone got lucky installing linux into this box? i really need it thanks in advance..even libreelec would make me happy, i wanna test other Os into this! followed all tutorials on internet but no lucky =(((

hello all i have g18ref andriod box i would like it to flash with linux os can any one tell me what image i should use please. i guess it is same as old mx2 box

I am trying to compile 150 Balbes source for a customer kernel. I would like to enable CAN, VCAN and SLCAN support in the kernel. I copied the config file from /boot to the Amlogic_s905-kernel directory as .config. I then ran make menuconfig and was able to select CAN, VCAN and SLCAN to enable those modules. I then ran make and it seemed to build fine. It took several hours so I went to sleep. I didn't find any errors in the morning and I was able to see the new files under /arch/arm64/boot. At that point I was a little confused on how to get the new kernel to emmc and boot it. I thought before I screw something up I would see if I could just build the modules wi…

Hi, I have a Mxq Pro 4k box S905 on which I have enabled dual boot and running Armbian_5.37_S9xxx_Debian_stretch_3.14.29_server_20171226 on SD card Here's the output of uname -a Linux amlogic 3.14.29 #150 SMP PREEMPT Tue Dec 26 16:55:23 MSK 2017 aarch64 GNU/Linux I want to add some modules so have followed the instructions here on compiling linux https://github.com/umiddelb/armhf/wiki/How-To-compile-a-custom-Linux-kernel-for-your-ARM-device I have compiled the kernel with new modules enabled and could see the Image at ls arch/arm64/boot/ dts Image Image.gz install.sh Makefile From the URL above I can see …

Hi guys, first post! I took the plunge and installed armbian on my android box. It boots and runs fine off SD but when I try to install to eMMC it just boots and hangs on the original Google TV splash screen. I noticed while reading tutorials that when I run and-sata-install it's supposed to ask me where to boot from, but all it does is copies all my files to /dev/data. How can I tell it to boot from eMMC? I notice near the end it says four times: /dev/boot: no Android Magic Value /dev/boot: not a valid Android Boot Image. Any help appreciated thank you!

I'm able to successfully boot-up into Armbian_5.37_S9xxx_Ubuntu_xenial_3.14.29 but got stuck instead at the root login due to the following issues... 1. Tried using usb keyboard - No response. 2. Tried SSH via WiFi or usb Ethernet - Failed to connect. I'm using 150balbes method of installing the image to SDCard. I also had input the required details on first run armbian.txt file. From documentation, I've understand that USB support in u-boot currently not enabled on all H3 boards. How to enable the usb support? TVBox : S-BOX Amlogic S905X TV Box

Hello Guys , I have ordered Micro SD Card Breakout for Exporting UART and JTAG Pins to get serial output on the SD card port without making any welding on the box. I have test it and it seems to work. The problem is that the output is some king of unreadable characters. I don't know whether it is a config issue or something else ? Does any one have used the UART over SD port ? Thanks,

I have been trying to boot various images for a while. Recently I have tried the latest Armbian and Libreelec Images but without success. I have tried both usb and sd card. Today I managed to get my serial UART connected to the box to see where things are stopping. I have attached a log from the serial console. I have tried just about every single dtb I can find and I have removed the dtb for it to load from emmc, it still fails at the same step. I have waited over 15 mins and still nothing. Boot logo of the X92 is on the screen but nothing else. GXM:BL1:dc8b51:76f1a5;FEAT:ADFC318C:0;POC:3;RCY:0;EMMC:0;READ:0;0.0;CHK:0; TE: 114034 BL2 …

Hello, I am trying to control volume Up/Down and mute through alsamixer with no success. When launching alsamixer the only changable device is DAC Digital, but actually it does not change anything, the volume remains at "56" and won't change. It is almost not possible to control volume through alsamixer or amixer command line. The only control I have found is the mute/unmute through /sys/class/amaudio but not the volume level ! It is the case for all armbian (debian, ubuntu) servers packages. I think some thing goes wrong... Any help or hint would be appreciated. Thanks

Hi I'm looking for tv box that i can easily install armbian(server edition) on internal memory (alredy had one but there was a problem with installation) requirements: -GbE Lan -3GB ram -70$+-

Hello. I have a TV-Box Android MXIII-G. Recently i installed armbian (3.10.108) from this image https://yadi.sk/d/wc2jqGsHuKy48. The image has been installed pretty good, i can get into the system with ssh service and apparently the system work good less the usb ports. This device have two ports USB 2.0 and one port OTG. I was read on the forum what you have to turn on them from echo on > /sys/bus/usb/devices/usb1/power/level but i can't do that. I can't create the file level on the folder power and i don't have it on there, when i try to write the file on that folder i get this error: [ Error writing lock file ./.level.swp: No such file or directory ]. …

Hi All, I'm using Armbian_5.37_S9xxx_Debian_stretch_3.14.29_xfce_20171226.img image file on an amlogic S912 board. That image doesn't have a usblp module compiled in the kernel. Does anyone can tell me where I can find the kernel used on that image and the .config file with the used options so I can compile the usblp module to use on it? Thanks a lot.

Ive been wanting to try putting linux on a cheap android box I got (TX3 Pro) that just collects dust now so I wanted to try out one of the downloads you guys have here but the official "Yandex Disk" download link won't work for me it downloads really slow and after about an hour it always fails. Are there any mirrors up? I was hoping to try the Ubuntu version but I'm just experimenting so would try and available downloads I could get.

Hi guys, I've been using my MXQ board for weeks (MXQ-S905-D16 DATE:151021). Recently it stop booting Android, even it doens't show bootloader logo image. After connect serial port, in order to debug uboot, seems to not recognize any boot medium. Typical loop GXBB:BL1:08dafd:0a8993;FEAT:EDFC318C;POC:3;RCY:0;EMMC:800;NAND:85;SD:800;USB:8; Booting a SD card, built with BurnCardMaker, I can enter the uboot console and do some checks. I can't access eMMC at all. gxb_p201_v1#saveenv Saving Environment to aml-storage... MMC init failed gxb_p201_v1#MMC init failed Any help on how to debug further this issue? How can I check eMMC status? …

ww bought this item and we need to connect via spdif for home theater receiver but it seems there is no connections for spdif. In the unit there is spdif connections but didnt work out

Hey guys, i don't know if it's a stupid question but, i'm trying to install KDE on my box (KI pro) under Ubuntu (Armbian_5.37_S9xxx_Ubuntu_xenial_3.14.29_mate_20171212.img) if possible, can you show me how ? thanks

Hello, I am using mxq pro 4k and the only dtb file that goes untill the end is the gxbb_p200.dtb, so I have installed every thing on the SD card and every thing works very well. Things getting worse when I installed the linux on the eMMC using the ./install.sh script. The installation goes very well, and every thing starts correctly, the only problem is that many drivers behave strangely, So I have compared the dmesg logs from SD and eMMC and many changes were noticed. So I suspected the dtb file to be not the one used in the SD card, so I have extracted the dtb file used when booting from eMMC and compare it with the one used in SD, and I got a ve…

How to install ubuntu operating system. http://www.airties.com.tr/products/stb/Air7200I

Hello, a few days ago a bought this box so that i could run Linux on it with ovpn server. The problem is that a can' t get the box to boot from sd. I tried different cards but no success, the toothpick method brings me to the recovery screen. I tested the mentioned sd's on a Beelink GT1 and they work just fine (boot Unbuntu without any problems). Can someone give me some advice on how to get this box on Linux because this is the only reason i bought this box. It would be running only Linux for 24/7, so installing linux on the box itself would also be an option. Thank you in advance for your ideas and suggestions.

I bought an A95X-A1 for $28 to run a fairly simple slideshow application (in chromium) for my wife for Christmas, unfortunately, it's showing some significant screen tearing (at 1080p and 720p). I tried enabling vsync on the framebuffer in /boot/hdmi.sh but no luck... any hints/tips? Specifically, it's running Armbian_5.37_S9xxx_Ubuntu_xenial_3.14.29_mate_20171208 off of an SD card.