Beginners

Hello, I've some trouble to install K3s on my OrangePi Zero2, somewhere I read it could be a kernel problem (not activated). I get following message. Can someone help me? Apr 08 20:39:15 oPi2 k3s[4055]: time="2022-04-08T20:39:15+02:00" level=info msg="Run: k3s kubectl" Apr 08 20:39:15 oPi2 k3s[4055]: time="2022-04-08T20:39:15+02:00" level=fatal msg="failed to find cpu cgroup (v2)" Apr 08 20:39:15 oPi2 systemd[1]: k3s.service: Main process exited, code=exited, status=1/FAILURE Apr 08 20:39:15 oPi2 systemd[1]: k3s.service: Failed with result 'exit-code'. Apr 08 20:39:15 oPi2 systemd[1]: Failed to start Lightweight Kubernetes. k3s.service - Lightweigh…

Just as warning - It seems that Orange Pi devices have quite "easy to burn" hdmi port. This post is quite clear about it: http://www.orangepi.org/orangepibbsen/forum.php?mod=viewthread&tid=1556 And case happened to me - I did it simply by plugging in and out hdmi cable. At some moment "no signal" is coming from HDMI (or maybe I should say "nothing is coming" ). It is on my Orange Pi PC. Now I wait for composite TV/Audio cable (in post I am referring there is information that TV out is still working). Or my device will be changed to "server" only...

On Armbian installed from Armbian_21.05.1_Bananapi_buster_current_5.10.34.img.xz on my Banana Pi (first version) install of liburing-dev fails. # apt-get install liburing-dev Reading package lists... Done Building dependency tree Reading state information... Done Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: liburing-dev : Depends: linux-libc-dev (>= 5.1) but 4.19.…

@Igor Just an hour ago did a new build and got [ warn ] ... 30-real-time143-full-plus-rt-fixes.patch [ failed ] Up until this morning everything was fine but now the patch fails. It seems today's commits brake the RT.

Hello I've seen threads about this topic before but can't get around if Armbian for Tinkerboard S is working with the official Raspberry Pi display? I have it working great with TinkerOS, problem is that I'm missing some kernel modules like CAN, CAN-raw and SLCAN which ThinkerOS doesn't ship with. That's why I would like to run Armbian instead. This is the display: https://www.raspberrypi.org/products/raspberry-pi-touch-display/ Can anyone tell me how to get the display working with Armbian?

Hi there, I'm trying to make the r1 work as a openflow switch using open vswitch. The most I've achieved is to make it work as a dumb 5 ports switch using this configuration script that I got from the sticky post: #!/bin/bash set -x ip addr flush dev eth0 ip addr flush dev wlan1 ip addr flush dev br0 ip link set eth0 up # No WLAN. Set cpu VLAN interfaces to associate to eth ports. ip link add link eth0 name eth0.101 type vlan id 101 ip link set eth0.101 up ip link add link eth0 name eth0.102 type vlan id 102 ip link set eth0.102 up ip link add link eth0 name eth0.103 type vlan id 103 ip link set eth0.103 up ip link add link eth0 name eth…

Hey there, uploading armbianmonitor failed, due to the connection issues, so i pasted it somwhere else: https://nopaste.xyz/?40aa3fcbb5834d1c#a9goEaQrtfCzF+MAAhWDb4+Gbfq6UMa2smyGL+ShbME= password is armbian My problem is, that there is no working outgoing IPv4 Traffic, i cant even ping a v4 adress. But on adresses, that get a AAA-Response from DNS it works fine. Had pihole installed, removed it for testing but this didn't make an difference. No firewall in use, iptables is empty at the moment. Every v4-Request ends up in a !N or No route to Host. While using pihole, i saw that the request went throug to pihole and was forwarded …

Yesterday, I wanted to remove the linux-headers-edge-meson64 package. (Board: odroidc2) As a consequence, the entire SD card and all mounted devices got deleted and I had to reinstall my entire system. scritch@odroidc2:~$ pstree -Aap 189643 apt-get,189643 remove linux-headers-edge-meson64 `-dpkg,189662 --status-fd 54 --no-triggers --force-depends --abort-after=1 --remove ... `-sh,189663 /var/lib/dpkg/info/linux-headers-edge-meson64.prerm remove `-find,189664 ./ -type f -exec rm {} + `-rm,189913 ./media/NAS/Public/Bilder/IMG_1097.JPG... I cannot imagine what I did wrong with removing this package, but I also c…

Install arduino on Nano pi m4 and asus thinkerboard with os armbian and arduino uno wifi rev2 board connected to USB Arduino allways complains with : avrdude : usbdev_open() : cannot open device : Permission denied avrdude : jtag3_open_common() : Did not find any device matching VID 0x03eb and PID list : 0x2145 Nevertheless I belong to group dialout and permissions on /dev/ttyACM0 are crw-rw---- Tried everything what was explained on internet about the topic but without any result !! The same issue on the ASUS Thinkerboard !! When I do "Get board info" then arduino detect the board correct !! ( BN:Arduino Uno Wifi Rev2 , VID:0x…

Hello everyone, I encountered a "No space left on device (28)" issue while compiling custom firmware and would like to seek your help. The firmware compilation process works fine under normal circumstances. However, after using the customize-image.sh script to install my own applications, the rootfs size became 3285 MiB, and I encountered the "No space left on device (28)" error during compilation. I modified FIXED_IMAGE_SIZE to 6G and recompiled, but the same issue persisted. After mounting the raw file, I confirmed that no additional files could be added. I suspect there’s some parameter restricting this, but I’m not sure…

Hi everyone, I have a Helios4 NAS on which I have installed Armbian 5.85. I used the Armbian-Config to install OMV 4.1.23-1 (Arrakis). I used OMV to configure some CMB/CIFS shares which were working properly. I connected to my server via SSH, and performed an apt update/upgrade, and I think this broke my SMB shares. According to my Googling, Debian now uses smbd instead of samba. When I try to access my shares at \\192.168.1.x I get a message that says "The specified network name is no longer available." When I run sudo service smbd status, I get the following: ● smbd.service - Samba SMB Daemon Loaded: loaded (/lib/systemd/system/smbd.service; enabled; vendor p…

Hi, Im trying to install a driver for a usb wifi dongle. Im getting the error below. Can I compile the driver with the older linux-header? Is there somewhere where I can get the current linux-headers? I tried adding --kernelsourcedir but it keeps asking for the same version. I used armbian-config to install the headers and source Kernel upgrades are frozen due to hardware

Hello, I'm looking to use a Raspberry Pi 5 and usually use Linux Mint. However LM doesn't work on ARM, so I'm looking at other OSes. Raspberry Pi Desktop is nice but needs work for basics like Print Screen etc. Ubuntu installs on RaPi5, so I'm wondering where Armbian fits into the necessity please?

ix.io/48Zd I've simply installed Armbian 22.05 Jammy Kernel 5.15.y, Size: 307Mb, Updated: Jul 2, 2022 on my aforementioned subject title / tagged OrangePiPCPlus. I can't seem to get hassio to install with armbian-config and then with Software > Softy it doesn't seem like the image for homeassistant io gets pulled, because when I check with docker images list or docker ps I don't get anything returned. Plus the checkbox isn't checked in Soft for hassio when I go back. What could I be doing wrong here? I did install Docker first, anyone have any tips?

I have installed Orangepi RK3399 Armbian 5.75 Bionic kernel 4.4.174 on Videostrong Mecoool RK3399. ( on eMMC ) I had to do only one thing. Disable DSI-1 monitor, because system regognized HDMI -1 and DSI-1. xrandr --output DSI-1 --off. ( via armbian-config boot environments setup ) Hardinfo recognized Excavator Single Board Computer. Meccool works pretty well. https://www.cnx-software.com/2017/08/11/videostrong-vs-rd-rk3399-is-another-development-board-based-on-rockchip-rk3399-processor/

About a year ago I reported the kswapd0 running out of control on OPi PC and Igor, after couple of tries made it behave. Today, I got OPi One loaded with the latest 5.26 Ubuntu D/T and the OPi PC2 with today's daily Ubuntu D/T and both demonstrated the following behaviour when pressed for memory: Specifically, running a "make -j2", when the available RAM got below 38000, the kswapd0 started getting more cpu time and eventually everything stopped waiting for disk I/O (80% wa displayed in "top"). Interestingly, not a single byte of swap storage was used. I tried different combinations of programs and everything worked fine until the demands on RAM got the available RAM …

I'm running Armbian Focal on my Pinebook Pro. With other distros, I'm accustomed to being able to run utilities requiring root privileges like gparted and Synaptic from the Application menu. With Armbian, however, nothing happens after I click on the application. There is no popup window to authenticate with a root password and the application does not launch. The aps work fine when run from a terminal using sudo, but how can I correct this problem with the Application menu? Thanks!

Hi, I compiled from scratch an armbian image and kernel, and in these ones the eMMC /dev/mmcblk1 is not present. If I try the (outdated 4.14) official images, the eMMC is present. Any ideas ? Thanks https://pastebin.pl/view/ba06da6f

I want to use orange pi pc plus for kiosk. Is there any way to disaplay own logo or any image during boot process instead for kernel messages. I have managed to disable kernel messages during boot up process but not it black screen. What changes should I make to display own logo or image during boot process insead of kernel messages.

When I check the eMMC from the Disk utility, it shows that it's normal. I can also boot the android distro that came with it normally. Help? 🥲

Hi !as title say i can not fully boot after reboot for electric failure. I have the boot partition on my sdcard then normaly boot on the encrypted ssd system debian buster with 5,4 system.(Linux gre 5.4.102-odroidxu4 #21.02.3 SMP PREEMPT Mon Mar 8 07:55:51 UTC 2021 armv7l GNU/Linux) I can access to initramfs run cryptroot-unlock script ,unlock the encrypted drive, then initramfs disconnect me and ... nothing, i can not view my HC1 on the network So I tried to boot on the sdcard system and could unlock the SSD and chroot on the ssd. i see logs but nothing helps me to resolve my problem. I share you my log if you can help me : messagesmessa…

I am thinking about the Over-scan on first boot issue and the problems people are having trying to log in if the login questions are off the screen bottom. I under stand it is caused by not having a lot of development into the screen size adjusting software. It is essential that the lead developers prioritize the main Armbian bugs issues and I do not consider on the fly screen resizing a major issue when a stop gap solution could possibly work. My temporary solution would simply be that all logins scripts be tripled. ie.. Login login login: password password password: Enter New Password Enter New Password Enter New Password: S…

I am a newbie in Orange pi or similar Boards. I have only some experience with arduino and similar. On my Windows 7 pc are all my music stored. I want to stream the played music to my local wlan. And receive/play the stream with a OPi. What do i need to stream the played music from Windows? What is the best choice of Orange pi for this? Do i need only one OPi or two (one for send and one to receive)? Thank you for help.

my ISP blocks port 80 so I need to use something like port 82 for a server I want to run from my house. In the ISPConfig control panel there is a setting under Sites -> Webdomain -> Options where one can change the http and https ports but that does not seem to do the trick. On one experiment I chanaged the listening ports in the nginx config but then none of the things like wordpress would run once installed. So what is the 'correct' way to change the listening port for all servers on an Armbian box running ISPConfig / NGINX installed from armbian-config? It works great but I break it every time I try to fix the port issue by instructions I'…

I'm using Buster on the Neo3 but am having an issue using an MT7610 USB wireless NIC. I believe the 7610 is on the list of supported devices, so am not sure if I'm hitting an issue with the build? Image Info: Armbian_20.11.10_Nanopineo3_buster_current_5.9.14.img.xz Error message from dmesg: [ 385.819703] usb 4-1: new high-speed USB device number 4 using xhci-hcd [ 385.983275] usb 4-1: New USB device found, idVendor=0e8d, idProduct=7610, bcdDevice= 1.00 [ 385.983299] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 385.983314] usb 4-1: Product: WiFi [ 385.983330] usb 4-1: Manufacturer: MediaTek [ 385.9…

Hello, Trying to compile the Qualcomm Gobi serial USB drivers for a Simcom wireless chip on a NanoPi Neo2 (sunxi64). I've loaded the kernel headers via armbian-config and typically this specific header file would be in drivers/usb/serial. We're using the pre-built image. Is there an easy way to get this into our kernel or do we have to embark on a full compile? Any help very much appreciated Rob

Hello, I have a RockPro64 running Armbian buster version 20.02.1 (Linux kernel 5.4.26-rockchip64) I have connected an M.2 SSD via an adapter in the PCIe slot, and have setup an LVM PV on it, with a number logical ext4 and btrfs volumes on it. All this worked fine when I set it up, but when I went to reboot the system, it never came back. On the serial console, I got a series of message from the firmware and U-Boot, then "Starting kernel ..." and nothing. (I waited about half an hour) I have increased the boot verbosity, by increasing the value in /boot/armbianEnv.txt from 1 to 7. If the boot is successful, I see lots of output after a delay of about a…

Hello! I tried to update jessie dismally, here: https://forum.armbian.com/topic/9984-apt-get-update-pointing-to-404-not-found-ip-151101240204-80/?do=findComment&comment=79685 Since then, I have been attempting to update to strech, I feel like I got close, but it's failed and I strongly suspect, my next reboot will hose it. (I will not reboot it, linux is wondeful!!) I updated my sources.list file to have the following 4 values. deb http://httpredir.debian.org/debian stretch main contrib non-free deb http://httpredir.debian.org/debian stretch-updates main contrib non-free deb http://httpredir.debian.org/debian stre…

Hi all, I am using Armbian Bionic on ASUS Tinkerboard S board(s) in an application where the power may fail at any point. I have now, for the second time, seen a running OS starting to fail with the error. ALERT! /dev/mmcblk0p1 does not exists. Dropping to a shell! I have restarted the board several times, but the error continues. If I do a: (initramfs) blkid /dev/mmcblk2p1: UUID=.... /dev/mmcblk2: PTUUID=.. It seems that the OS tries to boot from the wrong device. If I then, booting from another OS using SD card, change the /boot/boot.cmd rootdev: setenv rootdev "/dev/mmcblk2p1" And rerun the mk…

I am considering building a development machine for building images, and Debian packages (deb). I do not plan a GUI on it. I plan to ssh in. I would like to be able to mirror a couple of SATA drives for safety. Speed and connectivity are important. Can anyone make a suggestion on what board. Must run Armbian of course. Thanks, Steve

Hello all I have a many questions, but I will start off with the 2 I need to be helped on. 1: The Le Potato needs butter and sour cream. HAHA I has to say it... I am running the newest flavor of Armbian created in the last few weeks (Armbian 22.08 Jammy XFCE Kernel 5.10.y, Size: 1263Mb, Updated: Aug 30, 2022). I am new on to a non Pi bd so forgive me on the differences. After loading imaging and updating (or not) the board any time I try to do a full shutdown, all it does is reboot. After I get this to work I will work on my other issue below. 2: I would like to use this as a replacement for Pi 3A+ on a remote solar powered weather station …

Hi, I had already compiled ffmpeg on a 32bits OS for my Orange Pi RK3399 when it ran the Orange Pi 32 bits Ubuntu without too much trouble, but now that I have Armbian on my 4B, I'd like to compile ffmpeg too. The issue I have is that gcc is started with bad options (I'm not sure of that, that's what I think I understood): mktemp -u XXXXXX ZgAQ9I test_ld cc test_cc BEGIN /tmp/ffconf.efsAigGe/test.c 1 int main(void){ return 0; } END /tmp/ffconf.efsAigGe/test.c gcc -mfpu=neon -c -o /tmp/ffconf.efsAigGe/test.o /tmp/ffconf.efsAigGe/test.c gcc: error: unrecognized command line option '-mfpu=neon' C compiler test failed. poddingue@orangepi4-armbian:~/…

Hi, I am not sure but it maybe a bug in the script. After starting device from SD card (it is visible as /dev/mmcblk0 device) I have /etc/fstab as following: root@orangepiplus:/etc# cat fstab /dev/mmcblk0p1 / ext4 defaults,noatime,nodiratime,commit=600,errors=remount-ro 0 1 tmpfs /tmp tmpfs defaults,nosuid 0 0 /var/swap none swap sw 0 0 Then I run nand-sata-install script. It is working correctly, but later on it is modifying copied fstab file and content is as following (pls pay attention on /dev/mmcblk1p1): root@orangepiplus:/mnt/rootfs/etc# cat fstab /dev/mmcblk1p1 / ext4 defaults,noatime,nodiratime,commit=600,errors=remount-ro 0 1 tmpfs /tmp tmpfs defaults,nosuid…

My printer doesn't work. Armbian sees the printer but I cannot print anything. Via console command or for example Google Chrome print it doesn't work. My printer is a cannon printer. And the system is a new system, has nothing changed. As I mentioned in the title, it's a plus 2 board. Also the system is up-to-date. SOLVED ------ Installed cups-driver-gutenprint then my printer appeared on the list. "apt-get install cups-driver-gutenprint"

I am using the Rockpi 4c plus for the first time. I am also trying out Armbian (for the first time) and downloaded the latest stable version for my board (Linux rockpi-4cplus 5.15.93-rockchip64 #23.02.2 SMP PREEMPT Fri Feb 17 23:48:36 UTC 2023 aarch64 aarch64 aarch64 GNU/Linux) Using armbian-config I selected in hardware configuration "spi-spidev". when my board rebooted, I checked the following: dmesg | grep uart This returns: [ 6.120938] dw-apb-uart ff1a0000.serial: forbid DMA for kernel console I then tried dmesg | grep i2c and this returns [ 1.511705] i2c_dev: i2c /dev entries driver [ 1.564824] input: r…

Hello everybody, this is my very first post on armbian forum! I wanted to give a try to armbian on my bananapi M1 so I'm running the Debian Jessie server version. I formerly used both raspbian and bananian and always ran OpenVPN server in order to be able to connect home when I'm away. This time I reconfigured the service from scratch following this guide: https://wiki.debian.org/OpenVPN My problem is that I after the set up the daemon doesn't seem to start for real... :-/ The output of "service openvpn status" command report the service as running. On the other side, netstat on the server and telnet from a client on port 1194 act as the service isn't …

Hi everybody. I have an orange pi board I change the hostname to balabla. But when I connect it to the network and use IP Scaner, it will display the ip adderss of the orange panel. How to display host name instead of IP address?

Hello everyone. I'm trying to configure wifi on my orange pi zero based on armbian buster. I planed to work in two wifi modes - client mode and access point mode. Wpa_supplicant allows me to register several networks in one configuration file, one of the networks can be with the option mode = 2, which means an access point. Then if during scanning wpa_supplicant does not find available points for connection, its own access point is created (which with mode=2 in conf file). I have problems with connecting other clients to this access point (it sees, but always reconnect). dnsmasq works as dhcp server as service, but i try to connecnt with static Ip on client too - no resul…

I have a orange pi PC board that runs newest armbian 21.05 (kernel 5.10). I create a h264 video from v4l usb camera successfully with ffmpeg -f v4l2 -channel 0 -video_size 1280x720 -i /dev/video1 -pix_fmt nv12 -r 30 -b:v 64k -c:v libx264 test.mp4 but fps is low (10 - > 15 fps) and 100 % cpu load. When i used Cedrus264 encoder with: ffmpeg -f v4l2 -channel 0 -video_size 1280x720 -i /dev/video1 -pix_fmt nv12 -r 30 -b:v 64k -c:v cedrus264 test.mp4 ffmpeg failed: sudo ffmpeg-3.1.4 -f v4l2 -channel 0 -video_size 1280x720 -i /dev/video0 -pix_fmt nv12 -r 22 -qp 30 -c:v cedrus264 -c:a None night_video_test4_1920x1080.mp4 [sudo] password for lam…

Seems like a reboot fixed the issue. the only other thing I did was to start alsamixer and made sure the line out was not muted. I setup Jammy 22.04 on an OrangePi PC + and trying to get sound to work with XFCE through the speaker jack. I get sound output through the speaker jack if I log in via the terminal and use speaker-test -t wav -c 2, but I get no sound in XFCE through the speaker jack. HDMI works. What am I missing.. root@orangepipcplus:/etc# uname -r 5.15.93-sunxi root@orangepipcplus:/etc# lsb_release -a No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 22.04.2 LTS Release: 22.04 C…

Hello. I just got the board to play with, but I can't find any specific documentation on how to build a specific image to such board. After researching on google, foruns, etc. I've found some *mentions* on using the bananapim2 config and build (since they use the same core), but it's not working. Building an image using bananapim2 profile, after power on the device start booting from SD, but shows me: unknow image format and start asking for TFP to find flash. Can you please point me toward some useful information on how to build an Armbian image on such card? Thank you in advance

Hi all, yesterday I updated my system (Banana Pi) to the latest version (5.15, legacy-kernel) with apt-get update && apt-get upgradeAfter the upgrade the fixed-IP for the device was gone. It looks like the link /etc/network/interfaces has been overwritten with a new file during the upgrade - so I had to set up fixed IP again in /etc/network/interfaces like described here: http://docs.armbian.com/User-Guide_Getting-Started/#how-to-set-fixed-ip For the future I suggest changing the the upgrade-script so that the fixed IP is not overwritten. Additionally I think it would be good to write a short note in the changelog that the setting might be gone after the up…

I'm trying to add the optional input-debounce to the GPIO G ports of my NanoPi NEO (AllWinner H3) with a device tree overlay, but my overlay merely manages to brick the device. Here is my overlay, of which I've tried several tweaked versions: /dts-v1/; /plugin/; / { fragment@0 { target = <&pio>; __overlay__ { input-debounce = <1 1>; }; }; }; I create the file on the running device and I use 'sudo armbian-add-overlay <file.dts>' and reboot to test my changes. I'm using <&pio> as the target because I see in the device tree that &pio is a symbol to "/soc/pinctrl@1c20800". As for…

Hello, Today I found that the "serial-getty@ttyS0.service" service restarts every minute. It says "serial-getty@ttyS0.service: Succeeded." in the syslog/journal and then starts again, so it exited with code 0. The restart counter is already at 3085, so it's been like that for 2 days. No output is logged from the service itself. So I looked up its start command and ran it interactively. Again, with no output, after a minute, it returned with code 0. So I straced that thing and saw that it did lots of things, then print "Password:" somewhere, wait a while and then print "Login timed out after 60 second" and exit with code 0. strace /sbin/a…

HI I cannot find anywhere option to run compile.sh without GUI/NCurses. I'd like to just run basic command to build image (have configuration done) Can you point me to place where i can look ?

Hello to the community I'm new on armbian, previuosly was using Lubuntu on my cubietruck. I'm really happy to have changer for the armbian Bionic version more efficient and with many features. The cubietruck is running as a charm ! :) Just one problem, I wanted to install urBack from armbian-config menu. But this never installs it. I tried to run "sudo apt-get install urbackup-server" in a terminal via ssh, but with no success : "'urbackup-server' has no installation candidate" I'm sure I did something wrong or have forgotten something ? Could you please provide help for this little problem on my side ? Tha…

BUSTER DESKTOP - GLOBAL: https://www.armbian.com/orange-pi-plus-2e/#kernels-archive-all I downloaded this on 2 different computers and got a bad checksum when I ran "sha256sum name.img". Wondering if anyone else is as well? I may have remote access malware on my computer - could be causing it somehow, possibly. Thanks.

Is a h5 cpu as fast as a h6? Is a h6 computer fast enough to act as a notebook? Thank you.

I used to be able to easily install ili9341 lcd's on old armbian using, but now it looks like it became much harder now... can you tell me or point me to the right direction to start?

Is there detailed info somewhere how to do so? Like I posted here I once prepared a new sd card with armbian, poped it in to have the system resize to full sd card storage and then restored the rsync backup. Back then I was successful restoring the backup on hummingboard. Now I tried with odroid hc2 backup via ssh. Turns out you have to be root on the client if you pull a backup via ssh, else the files and folders user,group and permission won't be transfered. Also after restore I changed the UUID in /etc/fstab to the new sd card. Since I first set up armbian with a fresh install I should also have u-boot on it. Unfortunately system does not boot on my o…

Good day or night. Help me please. I have armbian. And there are - systemd. I do not know how to set up my usb keyboard to make it work with two displays at once. With tty1 and ttyS0 at the same time. To become a clone tty1 -> ttyS0. Tell me, how do I configure it?

Hi! I try to install mariadb connectorodbc from source in my orange pi, but i have problems, when i compile it. I use off.doc, there are, not says, about supports arm based, but i think, it must work. 1. installed requirments: git cmake make gcc libssl-dev unixodbc odbcinst unixodbc-dev 2. get sources: git clone https://github.com/MariaDB/mariadb-connector-odbc.git 3. tryed to compile it, by cmake, with using that config: cmake -DM_DIR=/usr/lib/arm-linux-gnueabihf -DCMAKE_BUILD_TYPE=RelWithDebInfo -DCONC_WITH_UNIT_TESTS=Off -DCMAKE_C_FLAGS_RELWITHDEBINFO="-I /usr/local/include/mariadb -I /usr/include/mariadb -L /usr/local/lib" i added new env var -…

I am using my Orange Pi as a Pi-Hole and also to run a discord bot of mine I am having the issue with this repo where I can install packages with `pnpm install` will run and work fine, but when i move to use `pnpm compile` which uses Parcel to compile the codebase from TS and etc to workable JS, I run it and it starts that command and then the Putty terminal I use to remote into my OrangePi (which is on my LAN) from my Windows 11 machine gets a "remote connection terminated" which generally just happens when the remote restarts. Any idea why this may be happening? Spoiler $ armbianmonitor -U 1 2 ### Activated 1 lzo-rle zr…

Help me, my orangepizero wont work. Every time i try to start ssh it say connection refused. Only sometimes it works. I recently installed Armbian 22.5 bullseye and after that it stopped working. Pls help

Hello, Here is the end goal of what I am trying to achieve: I am using a rockpro64 and would like to be able to boot from SPI into a rootfs present on an encrypted hdd RAID. I tried building an image with root encryption enabled but apparently, has stated on the wiki, it is possible that no prompt will be shown during the boot process. This is exactly what is happening to me, the boot process halts without showing anyway of entering the passphrase. Is there a way to solve this issue ? Or to reach my goal with a different method ? Many thanks !!

Trying to get USB gadget mode (Ethernet) working on an Orange Pi Zero 2. Was able to enable g_ether with success and got this far but could use a little help to finish the setup, thanks much. . sudo ifconfig -a dummy0: flags=130<BROADCAST,NOARP> mtu 1500 ether 1a:c6:7c:e6:1a:e5 txqueuelen 1000 (Ethernet) RX packets 0 bytes 0 (0.0 RX errors 0 dropped 0 overruns 0 frame 0 TX packets 0 bytes 0 (0.0 TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet 192.168.86.57 netmask 255.25…

Hello folks. Trying to set up bridged AP on armbian ZeroPI box. Configuring wlan for AP: cat /etc/hostapd/hostapd.conf ssid=Wifi2 interface=wlan0 hw_mode=g channel=9 bridge=br0 driver=nl80211 logger_syslog=0 logger_syslog_level=0 wmm_enabled=0 wpa=2 preamble=1 wpa_psk=66eb31d2b48d19ba216f2e50c6831ee11be98e2fa3a8075e30b866f4a5ccda27 wpa_passphrase=12345678 wpa_key_mgmt=WPA-PSK wpa_pairwise=TKIP rsn_pairwise=CCMP auth_algs=1 macaddr_acl=0 ### IEEE 802.11n #ieee80211n=1 #ht_capab= #country_code=US #ieee80211d=1 ### IEEE 802.11n ### IEEE 802.11a #hw_mode=a ### IEEE 802.11a…

Why am I getting error logs when trying to update, upgrade, etc? buster debian 10 orangepi chromium no firewall Reading package lists... Done E: Repository 'http://security.debian.org buster/updates InRelease' changed its 'Suite' value from 'stable' to 'oldstable' N: This must be accepted explicitly before updates for this repository can be applied. See apt-secure(8) manpage for details. N: Repository 'http://httpredir.debian.org/debian buster InRelease' changed its 'Version' value from '10.2' to '10.11' E: Repository 'http://httpredir.debian.org/debian buster InRelease' changed its 'Suite' value from 'stable' to …

Is it possible to install Minecraft Pi on Armbian?

I installed a nighly Build. over nmtui i added an wifi connection. Both the Wired and the Wifi connection get an IP from my router. i can connect ssh over the ip from both. But if i disconnect the wired cable, also the Wifi connection gets lost. If i connect again the Wifi is also here. i want to use only the wifi. Whats wrong? greets Thomas

As the title suggests I would like to know, if it is possible to use the Armbian designed for the Allwinner H6 (Orange Pi Lite 2) for the Allwinner H616 (Orange Pi Zero 2). I assume the differences between them might not be that big. Is it useable, if not, why is this the case. What could happen when I try to use it with the H616? Thank you very much in advance Ferry

Hello! Why if the device boots without eth0 physical link connection, and than when physical link is established, device do not get dhcp metric automatically, and network services needs to be restarted?

It is easy to expand Orange Pi Lite 2 adding missing analog audio. As described at Orange Pi Lite 2 schematics: TP23 LINEOUTL TP24 LINEOUTR

I apologize if this is not specific to armbian but it's really becoming a problem for me I am using Orange pi Zero LTS board and the Armbian image provided in the official downloads page (Armbian_21.08.1_Orangepizero_focal_current_5.10.60.img). I use the serial terminal and Putty in a Windows 10 PC to use this board uname -a result: Linux orangepizero 5.10.60-sunxi #21.08.1 SMP Wed Aug 25 18:19:32 UTC 2021 armv7l armv7l armv7l GNU/Linux I am using the serial console to control the board. If I type in a long string in one line, after a certain number of characters the string wraps to the beginning of the line by itself. The command itself i…

I've built Armbian for my purposes with the following build settings: ./compile.sh BOARD="bananapi" BRANCH="current" RELEASE="focal" \ KERNEL_ONLY="no" KERNEL_CONFIGURE="no" BUILD_DESKTOP="no" EXTERNAL="yes" \ INSTALL_HEADERS="yes" .. and the board boots from the resulting image just fine, and seems to be running well. Now, I want to clone a repo onto this board, and use the ONBOARD compiler for development purposes .. I'm doing some CAN development, and I want to use SocketCan (https://github.com/jackthompsonnz/socketcan-linux-5.0.git) which is a kernel module for gaining access to a USB-CAN adapter. So I connect to it, clon…

Hi, I can't update from armbian. I tried to switch to a new repository as write on this page: https://www.armbian.com/kernel/ When I proceed to apt-get update, I've got: my sources.list.d/armbian.list: Any idea ?

hello, i need help. i want to building my project using orange pi zero , in this project i want to use orpi zero as audio reciever. i need 3pc orpi zero set to client and i want to stream audio over LAN locally from my PC to orpi zero i want to stream audio to my 3pcs of my orpi zero individually or broadcast to all 3pc. and i need a GUI to control the orpi. please help me. thanks and sorry for my bad english

Hello why only gzip ? make all compression available not gzip only !! CONFIG_KERNEL_GZIP=y # CONFIG_KERNEL_LZMA is not set # CONFIG_KERNEL_XZ is not set # CONFIG_KERNEL_LZO is not set

On my NanoPi Neo Air it seems there is no pull up resistors on I2C (SDA, SCL). Is it possible to enable pull-up on these pins in a DTS overlay (either the standard i2c dtb or in a user overlay)? If so could anyone give me an example of how to do that...I have tried to understand the dts files but failed.

My /var/log fills to 100% quickly after cleaning. I am running Ubuntu 18.10 with Nextcloud snap on a Cubox-i4. Others have mitigated the problem by changing the logging strategy, but I rather not mess with this. Any ideas?

Hi, I'd really like to set up an affordable pi hole on my new network. I think I have it narrowed down to three choices, but I'm not sure which to select. There's an orange pi 3 LTS kit available for $61. However, there is a warning listed on that Armbian image regarding the PCIE controller, that I don't understand the implications of. How serious is that problem? For a significantly less I can pick up this android TV box, that has set up tutorials on YouTube for Armbian. TX3 Mini Android 8.1 TV Box 4K TV Amlogic S905W Quad core H.265 Decoding 2.4GHz WiFi TV Box - 2GB/16GB. But it's not clear to me how much more challenging this would be to …

This is a quick notes Guide for the Installation of THINGER.IO MAKER SERVER & MongoDB on ARMbian My Device : Cubietruck OS Installed : Armbian Bionic mainline kernel 4.14.y or 4.17.y ************************************************************************************************************************************************************************ sudo apt update sudo apt upgrade sudo apt install git apt-get install snap apt install snapd snap install hello-world sudo snap install thinger-maker-server *******************************************************…

Lubuntu Focal / Panfrost Download the latest current version of Focal (Panfrost drivers included) for your device and follow the instructions https://www.armbian.com/download/ After the first login type ... exit (exit from root, login with the new user id entered in step 1) Download the Panfrost Tester script git clone https://gist.github.com/8f8b0cd40e95ac18c539cd29ecd4c3d2.git install-panfrost-tester cd install-panfrost-tester Version 21.0.0-rc5 will be installed. If you wish, you can modify the mesa branch using: nano installPanfrostTester.sh (ex: go to install mesa line and change from 21.0 to master…

https://packages.debian.org/sid/armhf/u-boot-sunxi/filelist Orange pi one is not on the list. Any solutions? Thank you.

Hi all, I'm new to armbian, I have a nanopi r4s SBC, and I want to know that if armbian nanopi r4s enabled(applied) `overlays-00-add-oc-opp-rk3399.patch` by default? i.e. https://github.com/armbian/build/blob/master/patch/kernel/archive/rockchip64-5.10/overlays-00-add-oc-opp-rk3399.patch I really need this patch to bootst up performance, otherwise I have to build armbian by myself.

In need of a download url: orangepiplus2e debian buster; 32-bit.; saving to micro-sd, as in the past. Would like to download all 3 for debian buster 10.5.0: kde, gnome, cinnamon. - "if they exist". I tried the old link I used to download from that worked well: "https://dl.armbian.com/orangepiplus2e/Debian_Buster_Next_Desktop.7z" but 404 now. Would like to know where I could find the checksums too should someone know where they are. Thank you!

Hi, is it possible to connect to open wifi network from debian wheezy on my Cubietruck? Tried many ways, googled a lot, have no solution. Wpa2 networks works great, but not open wifi. Please help!

Hello here, I thank you in advance for coming here. I have gotten an Orange Pi Zero 2 H616 yesterday, and I wanted to install Docker as Rootless on the ARMBian Bullseye image, but It is failing every try I do to actually bring it up. It always gives the following message in Journalctl: docker.service: Start request repeated too quickly. I just wanted to ask if anybody has actually found a way to deal with this. Alternatively, I cannot boot any kernel higher than the legacy 4.9 kernel given on the main page, all the others give no feedback when the board connects to the current. I am pretty sure I am missing something, but I found no info …

Hi! When I try to run overlays on Armbian 21.08.2 Focal, they do not seem to load, see attached screenshot below for the output during boot. It looks to me that fdt is not properly run or sth. root@rockpro64:/boot# cat /etc/os-release NAME="Ubuntu" VERSION="20.04.3 LTS (Focal Fossa)" ID=ubuntu ID_LIKE=debian PRETTY_NAME="Armbian 21.08.2 Focal" VERSION_ID="20.04" root@rockpro64:/boot# cat armbianEnv.txt verbosity=1 bootlogo=false overlay_prefix=rockchip rootdev=UUID=73fac48d-4f73-4ac1-b899-e67dc98b5794 rootfstype=ext4 overlays=pcie-gen2 spi-spidev extraargs=net.ifnames=0 isolcpus=4,5 usbstoragequirks=0x2537:0…

My Nextcloudpi was running like a charm for years on an Odroid HC1 (no possibility to attache a monitor). It was still running Debian Buster 19.11.7. It was running so well that I neglected it a little too much. And then, when I attempted to upgrade the distro, it went bad. During the upgrade the following error occured: `` Err:5 http://httpredir.debian.org/debian buster-backports Release 404 Not Found [IP: 2a04:4e42:6f::644 80] Ign:6 http://mirrors.dotsrc.org/armbian-apt buster InRelease Err:7 http://mirrors.dotsrc.org/armbian-apt buster Release 404 Not Found [IP: 2001:878:346::116 80] Reading package lists... Done E: The reposito…

Hi, A few months back I installed version 5.10 on a cubietruck. After setting everything up I configure the system to boot from SD and have the system on SATA. Everything was fine until yesterday. It looks like my SD card is corrupted. I created a new SD card using version 5.14 and booted, after booting I mounted the SATA drive and everything seems fine on the SATA. The question is how can I boot again from SD and use the existing system on my SATA? I don’t want to have to reinstall/configure everything. Thank you Mike

Hello Team, everytime the paket "linux-buster-root-current-bananapi" is updated, i lose my unattended-upgrades conifg. /etc/apt/apt.conf.d/02-armbian-periodic ist set to default /etc/apt/apt.conf.d/50unattended-upgrades is deleted How can i stop it? dpkg -L linux-buster-root-current-bananapi | grep apt /etc/apt /etc/apt/apt.conf.d /etc/apt/apt.conf.d/02-armbian-compress-indexes /etc/apt/apt.conf.d/02-armbian-periodic /etc/apt/apt.conf.d/71-armbian-no-recommends /etc/apt/apt.conf.d/81-armbian-no-languages /usr/lib/armbian/armbian-apt-updates Thank you

the last weeks I did read about some SBCs not having a ethernet-connection after update. This time I got this with update from 5.10.3-dev to 5.10.4-dev with armbian buster I had the Network-Manager deinstalled and did see my IP which I did configure via /etc/networks but couldnt arrive the K1Plus via ssh/ping and when I used a TTL-RS232 on the K1Plus I cant ping anything in my network or the internet. But dmesg did say the networkport eth0 is up (yellow and green led are also did "work") dwmac-sun8i 1c30000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx To switch back to a older kernel I had to configure wlan0, but eth0…

Hello, I'm a novice Armbian user (I deployed a number of $8 Rockchip 3328 SBCs as security monitors which for the last few months have been working just fine). I have six identically configured SBCs that I have been regularly updating - about once every few weeks, I run 'sudo apt update' and 'sudo apt upgrade' just to make sure the systems have the latest updates to Armbian and the various software packages I depend on. Up until yesterday, updates were working just fine. Yesterday, I tried to update the SBCs, and all six threw the same errors during 'sudo apt update'. The errors are: E: The repository 'http://apt.armbian.com bionic R…

Hello, I am planning to create a Kubernetes cluster from 5 Raspberry PI and one of the alternatives mentioned in tags, 9 hosts in total. I want to mount and customize the installation images with ssh keys, static IP address, etc, and to skip the initial script offered at login by the CLI images. Can you point me to the right piece of documentation? Thank you, Stefanita Vilcu

Hey all... Looking to put something a LOT more lightweight than RaspiOS (and not-modern-desktoppy at all, please) on my Pi4Bs. Found out about armbian from the Wikipedia page and downloaded the Jammy CLI image, but I can't get either gitlab or github to talk to me for downloading either of the recommended imagers; gitlab just gives me a blank page (no HTMl at all, per Firefox "view source") and github outright refuses connections. If it's important I do not have accounts on either system, and am loath to create same, although I could if necessary. I don't have Internet at home so I'm doing this from a Win10 PC at my public library; it's running t…

If anyone needs to get the 3.5mm audio jack working on the N2+, here's one method. 1. Edit or create /etc/asound.conf with these lines. Copied directly from the Hard Kernel Ubuntu setup. pcm.!default{ type hw card 0 device 1 } ctl.!default{ type hw card 0 } 2. Run this script to turn on the 3.5mm audio in alsamixer. The settings are listed in the same order as in alsamixer. #!/bin/bash # 3.5MM JACK, set to max gain amixer sset 'ACODEC' '255' # 3.5MM JACK - set in/out channels (src/sink) amixer sset 'FRDDR_B SINK 1 SEL' 'OUT 2' || true amixer sset 'FRDDR_B SRC 1 EN' 'on' || true # 3.5MM JACK amixer sset 'TOACODE…

im using orange pi with armbian and i try to rotate display by seeting in boot/armbianEvt.txt fbcon=rotate:3 it only rotate the console message. but when i run startx (startx installed via sudo apt-get install --no-install-recommends xserver-xorg x11-xserver-utils xinit openbox ) is still default mode not rotated It makes me angry to know that i have achieved it without any difficulty with a RaspberryPi 3 simply by adding display_rotate = X in /boot/config.txt and that there is no way for Armbian.

I am trying to install nextcloud with armbian-config. But I have a lot of problems. 1. nextcloud not starting 2.apache server does not start properly root@orangepione:/var/www/html# apachectl restart AH00112: Warning: DocumentRoot [/var/www/ncp-web/] does not exist orange pi zero pls help mi welon

Hi all, We try develop remote controlled plug with Orange Pi Zero r1... We have some problems... We want operation is follow this steps: 1- Powered device... 2- First Start Device is opening with Wifi AP mode (?) 3- Users connect to device with ethernet or Wifi 4- Go to (192.168.1.1) 5- If users want to direct control plugs no problem they are using this page Open/Close plugs. 6- If users want to 'device is connect LAN', they are select LAN selection and if they have wifi, select their wifi SSD and type pwd and click SAVE button or connet with Ethernet. (?) 7- Device is restart and connect to LAN.. 8- They are …

Hello, I got a Orange Pi One H3 based board with the usual 512MB DDR3 ram and never used it much but lately I'm trying to use it as an everyday home computer, so I'm trying to push the hardware as much as possible to benefit from any features. I actually have installed latest armbian v5.9.x kernel o.s. with Buster distribution and with some zram usage it's quite acceptable on the speed side. I had to add an heatsink on the SoC cause after latest mainline kernel temperature it seems to get close easier to 80°C degrees and even if I suppose it might work even at these temps, I think it was better to lower it down a bit (probably 5° to 10°C degrees). No overclocki…

hi there, i was wondering if there a away to compile mosquitto 1.4. successfully the current version is 1.3.3 ( or something like that) when I try to compile it it seams to compile correctly and it seams to install correctly. the broker portion works fine but the client side does not. when you try to publish or subscribe it complains a file is missing. I needed it for websockets to compile id did this wget https://github.com/warmcat/libwebsockets/archive/v1.3-chrome37-firefox30.tar.gz tar xvzf v1.3-chrome37-firefox30.tar.gz cd v1.3-chrome37-firefox30 mkdir build cd build cmake .. make sudo make install sudo ln -s /usr/local/lib/libwebso…

dmesg -w doesnt seem to work in armbian. How to continuously watch dmesg ?

Hi everyone, I'm new to creating my own images and I'm learning this just because I'm interested in it. I am trying to build ubuntu 24.04 for my rpi3b using the build configuration for rpi4b. Now I'm trying to automate the process of the first launch (skip the selection of bash, zsh, creating a password for root, creating a regular user, etc.). In one of the topics, I found out that I can delete "rm -rf/root/.not_logged_in_yet" And the system will not ask for the initial setup, but to make all the necessary changes for me, I wrote a small function in customize-image.sh: SettingSystemFirtsRun() { #disable defaut script sudo rm -rf…

When attempting to install microk8s, I noticed that the `ip_tables` module is missing from the provided image (Ubuntu 24.04 (Noble) Minimal / IOT image) on this page: https://www.armbian.com/radxa-dragon-q6a/ Easy way to replicate: ``` sudo modprobe ip_tables modprobe: FATAL: Module ip_tables not found in directory /lib/modules/6.18.0-rc6-edge-qcs6490 ``` Is there another image that has this module are part of the kernel or do I need to build the kernel myself? This seems like a module that should be included for an image that is labeled as `IOT`.

On my Orange Pi Zero I run Armbian Buster and the only software running is Shairport. Unfortunately I used to have a crackling noise every 20-40 secund which was solved after entering root@orangepizero:~# renice -n -19 -u shairport-sync 110 (user ID) old priority 0, new priority -19 So far so good - but after a reboot the prio is again 0. So I tried to use nice nice -19 shairport-sync but after a reboot the prio was again 0 How can I set the priority of all process run by the user (-u) “shairport-sync” to -19 when they start?

Iam a newbie to orangepi 3. I never had experience in doing anything in SBC's before. I was trying to learn to create a home NAS with orange pi 3 and open media vault. I was impressed with orange pi as it was cheap and more hardware. Here is what i did which took me days but ended up in nothing 1) Got success with ssh. Dloaded Armbian bullseye mainline image from armbian website. Mounted it to class 10 SD by Etcher. After finishing, no boot drive on sd card. Shows 'SD is corrupted'. I saw in this forum that after mounting, two files such as kernal and boot files should be present for ORPi 3 to boot.https://redirect.armbian.com/orangepi3/Bullseye_current 2)…

I have been running the 5.03 image provided, and it works amazingly, many thanks to igorpec and tkaiser. Now that the 5.04 image is ready, is there an easy way (via ssh?) to update my system? Obviously I could copy the image to an sd card and run it that way, but the system is running so well (on external hard drive and running plex server) that I'm reluctant to upset it all. Many thanks

hi all, I was looking for some unified os for more "rpi zero" clones and found beautiful armbian; and I am quite new to linux still, longtime/decades windows user; to "dogfood", I am also considering use of armbian on my "tiny-big" uefi-x86 (now NUC10, but got now new amd ryzen7 8845hs gmktec nucbox k8 plus), so I tried as very first setup on that ryzen7 latest armbian "ubuntu gnome" - monitor output is attached, so far so good, although I dont know if everything around usb3/4 is working well (log contains some red messages, dont understand them) - it was only simple install, and I have this comments: https://www.gmktec.com/products/amd-ryzen-7-8845hs-mini-pc…

I am able to rebuild the kernel for this board and the image runs fine, but it appears that is does not support the UART on the GPIO. Does anyone know which kernel files need to be modified for this? It looks like its one of the .fex files in the pack-uboot folder. But there are multiple folders in that folder with multiple .fex files that all reference the uart. (sun50iw6/sun50iw9). How can I tell which .fex file the build is using? Thanks for any help, -Rich