Allwinner sunxi

Hi, I want to use LCD on Orange Pi 3 LTS. But there are no fex/script.bin in the boot directory. The LCD pins are given the RGMII Ethernet Interface. I could not configure the device tree for internal LCD output. Could you please explain how can i use LCD on these system ? Good Work.

I have a device based on an Orange Pi PC. I want to add a 7 inch touchscreen display in a case. This is the kind of thing I'm looking for, but I'm not wedded to that one. I just want something that's known to work reliably. Thanks in advance for suggestions or guidance.

Hello, everyone. I searched long time to run cocos2d on Armbian_5.38_Orangepizeroplus2-h3_Ubuntu_xenial_default_3.4.113_desktop. Now it run but very slow because device is orange pi zero plus 2 (mini com like arm). when build project, it automatically works for desktop with opengl. We already compile & run new cocos2d-x-3.15.1 cpp project on Armbian. FPS is 30. If we make this project work on opengles, fps will rise. Have you got issue? I guess if i change this to opengl es then speed will be ok. Because on Android on same device, apk's fps is 60. Please help me.

hy all! i need little help.... i have one orange pi plus2e and try make wireless access point... OS: armbian 5.23 Net connection: PPPOE 200/100Mbit (username/password) i read several topik about in this theme. try many settings... ap option not work my plan: I would like to do wifi access point with NAT,Firewall,DoS protection,UPnP,PortForward,IP/MAC filter function...automatic reconnection,WPA2 wifi protection i very amateure in this theme. I really prefer it if I did OpenWRT,But reading support.not available. I very big thanks help...

I noticed that the Nano Pi Neo has a pin or 2 labeled 3.3V out. How much current is available from this source? I have a CODEC and a few other things that need 3.3V power. I need to know what the 3.3V output can deliver safely, or if I should just add my own 3.3 regulator for the external circuitry.

Hello, When configuring I2C ports in armbian-config it shows 3 I2C ports (i2c0,i2c1,i2c2). The pinout from http://linux-sunxi.org/Xunlong_Orange_Pi_Zero shows only 2 I2C ports: 3 TWI0_SDA / PA12 / GPIO12 5 TWI0_SCK / PA11 / GPIO11 and 16 TWI1-SDA / PA19 / GPIO19 18 TWI1-SCK / PA18 / GPIO18 are there 3 or only 2 I2C ports ? (how to configure the third if there is one ?) thanks for your answers Jean Antoine

Good afternoon, I am using armbian 5.25 on orangepipcplus with legacy kernel. when visiting google.com site with firefox, I will only see the "mobile" site with restricted functionality. On the bottom of the screen there is a link "Google-Ansicht klassisch" which should bring me to the desktop version of google. But when pressing this a popup tries to come up but will not finish its presentation. Now this tab is blocked, I never get to accept google terms and conditions and can not use google. Do you see the same behaviour? Is there any known remedy? PS: Yes, I tried firefox "safe mode" - same thing! Thanks, gnasch

When I attempt to run the Sudo apt update command I am receiving an error message about the Repository not being signed. See attached photograph

EDIT - UPDATE 'apt-get upgrade' worked fine - thanks to all armbian developers and contributors! --- Hi, Should I wait for 'apt-get upgrade'? ... never change a running system ;-) Due to Ethernet Port (LAN) related issues that effect OPI0+ to the newest Armbian release - under development (Now it seems that the OPi Zero Plus is missing his Ethernet-device ...). My OPI0+ is only connected via LAN cable to the router. And I don't like to use Wi-Fi (WLAN). Regards, Jochem

Orange Pi PC+ installed Armbian Bionic mainline kernel 4.19.y, Armbian Stretch mainline kernel 4.19.y not working sound via HDMI, on an older version Armbian Xenial desktop legacy kernel 3.4.y sound via HDMI works. What to do to make the sound work in the new version

Hello, electronics enthusiasts, I can't figure out how to activate the i2s bus and enable audio input and output, for example pcm5102(DAC) and pcm1808(ADC) My board Nano pi neo2

Hello! I have a Zero2 board with 1GB of RAM. I compiled a Debian 12 desktop image for Zero2 using Armbian and I want to play online videos through a web browser. Unfortunately, the results have been disappointing as the performance for 1080p videos is very slow. I tried using swap, but it didn't help. I also attempted to play 1080p videos using MPV and VLC. MPV can still play the videos, but it feels sluggish, and VLC gets stuck on the screen until the playback is finished. I would like to know how to configure Zero2 on Linux to achieve video acceleration. I'm new to this, so I would appreciate some guidance. Thank you!

Hello Team, We are using H618 Allwinner SoC in which we have requirement to enable secure boot as per requirement. We have already checked couple of documents regarding secure boot enable but tools and scripts are not available to create Keys and other process using which secure boot can be enabled This project is based on the armbian image building system and is suitable for the Debian and Ubuntu image building projects of the Wildfire LubanCat (Luban Cat) Allwinner series boards. We are using allwinner-h618-gentoolinux build for build and development perspective. Let me know if need anything else from my end. …

Hi there, after a recent apt upgrade I have problem with WiFi. I CAN connect to one WiFi, WPA2, static IP. However I CAN'T connect to another one, WPA2, tried with static and dynamic IP. I am using NetworkManager. Searched forum, deleted /etc/networks/interfaces. Information in /etc/NetworkManager/"network name" seems to be correct. Almost the same as for working net. (except uuid & IP info) CAN also connect from laptop. wpa_supplicant line from ps: /sbin/wpa_supplicant -u -s -O /run/wpa_supplicant What should I check else?

I'm working on Orange-pi zero (H2 +)board. Sometimes , after rebooting of system , I Noticed that MAC address is changed. From where It is reading MAC Address?? any help on that?

I'm trying to boot from exp. flash from site (Armbian Stretch mainline kernel 4.19.y), board couldn't boot (LOG): U-Boot SPL 2018.03-armbian (Jun 11 2018 - 03:52:30 +0000) DRAM: 2048 MiB Trying to boot from MMC1 NOTICE: BL3-1: Running on A64/H64 (1689) in SRAM A2 (@0x44000) NOTICE: Configuring SPC Controller NOTICE: BL3-1: v1.0(debug):c9f55c0 NOTICE: BL3-1: Built : 03:52:19, Jun 11 2018 NOTICE: DT: sun50i-a64-orangepi-win INFO: Configuring AXP PMIC INFO: PMIC: DRAM voltage: 1.50V INFO U-Boot SPL 2018.03-armbian (Jun 11 2018 - 03:52:30 +0000) DRAM: 2048 MiB Trying to boot from MMC1 NOTICE: BL3-1: Running on A64/H64 (1689) in SRA…

I have a cubietruck at my cabled network (RJ45). Using Ip Scanner tools, I only find it by MAC address. The manufacturer name have nothing, how can I put a manufacturer name to help me find it? Other computers show their manufacturer names.

Hi, Firstly I wanted to say thanks for providing builds for the Cubietruck, however unsupported they are. Current build is working after I fixed up the repository and the wired network configuration - learnt a fair amount in one afternoon! Secondly, is it possible using armbian-config to switch to stable repository and a stable kernel and reasonably expect it to still work? Many thanks,

Hi everyone, I got a problem with my beloved Armbian. I switched form a (SD-killing) Pi1 to a OrangePi. Everything runs fine except my Busware SCC (a RF interface for Homematic home automation). The module sits on the extension header and uses Pins 8 and 10 for the UART as well as pins 11 for reset and pin 12 for the bootloader. For the device to work normaly, pin 11 (GPIO17 on the rpi) has to be set high, else the device will stay in reset. Pin 12 I just left as it was on the rpi, the manual says I'm running ARMBIAN 5.36 with kernel 4.13.16-sunxi. If I understood it correct, pin 11 should be GPIO1. To set it high, I use the following code in r…

opi+2e What is the best way to install a mainline kernel so that I can check out containers? I tried to install mainline kernel and ended up with a blank screen I then installed a nightly and it is just cli so I installed open box by ssh root@10.x.x.x9 apt-get install openbox obconf and now i get a blank screen also what is the best way to get a gui with mainline kernel? Thanks for your help Dave

I got myself a Banana Pi M2 Zero (with H3 chip) and am running Armbian (Armbian_21.08.1_Bananapim2zero_buster_current_5.10.60) on it. I have enabled SPI by adding the spi-spidev dt overlay. Now I want to use both CS pins at the same time so that I can connect two devices. The spi-add-cs1 overlay doesn't change anything so I researched a bit and found this custom overlay. Unfortunately it didn't work too and there is still only a single spidev available. Is there any way to enable both of them at the same time?

Hi. Is it possible to toggle usb power on Orange PI Zero? What does PL2 do?

Встроенный микрофон не работает при установке рабочего стола.

Hello, I have moved the armbian system into my usb hdd lately but now I want to move it back. How can I do this?

As the title says, my OpiPC don't want to boot. It starts to boot, with UART console I can see u-boot loading and doing its job, but just when it would start the kernel the console gets borked with non-ascii characters. After this, the board just hangs there. I've tested with 3 different images (written out by Etcher), checked the images checksum and checked the SDcard with F3. This setup worked fine a month ago, when I last had the time to play with it. Since than, the board was just lying on my desk, turned off.

Please help me build driver for usb wifi adapter Tenda u12 (RTL8812AU chip). Board Orange Pi+2 (Armbian OS https://dl.armbian.com/orangepiplus/Ubuntu_xenial_default_desktop.7z) adapter driver link http://tendacn.com/en/download/detail-2863.html build log with error Spoiler root@orangepiplus:/home/alex/Desktop/RTL8812AU_linux_v5.1.5_19247.20160830# sudo sh ./install.sh ################################################## Realtek Wi-Fi driver Auto installation script Novembor, 21 2011 v1.1.0 ################################################## Decompress the driver source t…

Short issue description: sometimes after pulling a USB device out it makes OPi3 USB host controller stuck. One or more USB ports are getting unresponsive (sometimes all four of them) and no messages in dmesg about connection/disconnection. No matter what device is used. This thing happens only on the first host controller, the second rear one is functioning and responsive. It happens more often if we push in and pull out four devices in a short period of time. Wherein /sys/kernel/debug/usb/devices is stuck too, we cannot read the info from it and all the utils (vi, cat, etc.) are getting the D state (uninterruptible sleep). "lsusb" is also not working, but can b…

my code works just fine when executed during ssh session on NANOPI NEO CORE (booted from emmc) ! when trying to make this code run automatically on startup which is something that i have done before, unexpected delay happens after 5 seconds of continuous taking data from mic to be sent on serial port ! could not figure out what is really going on ! does it differ in terms of configuration of the nanopi when logged in through ssh !? or is there some configurations that must be handle on startup scripting !?

Hello, I try to communicate via SPI, if i try receive data over SPI on MISO pin I got message without last bit so I should receive 0x23 and i got 0x22. SPI is set on MODE 3. It has same behaviour on PI PC and PC2. If i try on RPi it works fine. Do you have anybody some advice ? Regards Jan

USB audio is not usable with 4.x dev kernels on OPI Zero board. I don't see any errors, but audio goes with scratchs. Other usb devises works fine with 4.x dev. USB audio works well with 3.x stable kernel.

Hello My system is installed on the internal eMMC. After a system update my OPi will not boot anymore. Perhaps anyone can help. Thx.. Gesendet von meinem WAS-LX1A mit Tapatalk

Help I'm trying to get my t230 dvb stick to work with my orange pi pc2 I copied the .fw files across and reboot but it will not load the firmware can anyone help please

I have Debian and installed Mate. I happen to install sv_SE.UTF-8 and en_US.UTF-8 but I cannot change languish on desktop from sv_SE.UTF-8 to en_US.UTF-8. First I just remove "sv_SE.UTF-8, but then the Terminal complain it did not find sv_SE, so install again. I generate the 2 locales, And thied to when I marked the local I want en_US, but it say sv_SE are active in Mate. I tried to run: sudo localectl set-locale en_US.UTF-8 Failed to issue method call: Access denied I don't find any "Languish controll" at all in Mate desktop It is right languish in terminal. Cheers Joni

I am new to OPi+2E & Armbian combo. When booted up, all outgoing traffic is fine (though speed is very slow) but no incoming traffic gets successful, e.g. SSH and Ping. I tried DHCP and Static IPs. I believe there is no firewall running. I connected to WiFi through armbian-config and WiFi also connected but no incoming on either interface. If I disconnect LAN cable while WiFi is still connected, incoming traffic works on WiFi. As soon as I connect LAN cable again, incoming stops working on both interfaces. Same behaviour on Raspbian and Armbian. Is there some firmware I need to update? Help will be appreciated.

Since I upgraded to Armbian 23.8.1 (Kernel 6.6.31) I cant copy larger files from a CIFS share to a local attached sata disk on my banana-pi. Copy starts and gets stuck at around 4GB of transferred data ... its independant if I use rsync, cp or mv to transfer files. What I can see in the logs directly after the transfer gets stuck: root@nas03:~# dmesg [ 1280.477240] ------------[ cut here ]------------ [ 1280.477276] WARNING: CPU: 1 PID: 4182 at lib/iov_iter.c:316 _copy_to_iter+0x3bd/0x3c4 [ 1280.477372] Modules linked in: cmac nls_utf8 cifs cifs_arc4 nls_ucs2_utils cifs_md4 fscache netfs zram evdev axp20x_adc lima gpu_sched drm_shmem_helper sun4i_gpadc_i…

My development board is Orange Pi One, my development board installed armbian, but its Language Supports work is not normal, open for a while there will be flashback phenomenon! ! ! Help everyone to give a solution! ! !

Hi, I'm looking for a working OS Image for Nano Pi Neo Air for using I2S, SPI and Bluetooth (AP6212). Is there a release I can use "out of the box" for this? Regards Bernhard

See build log https://paste.armbian.de/lesoquheja The kernel works, but installing the .deb failed because my extlinux script could not copy: /usr/lib/linux-image-6.18.1-edge-sunxi/overlay/sun8i-h3-analog-codec.dtbo The whole overlay folder does not exist. It does exist for 6.12.58-current-sunxi and last time I compiled kernel for the nanopineo was 6.16.8, the overlays were created. I remember it was also once the case with edge kernel for other SBC ( .deb package from the Armbian beta repo). That time own local build did create overlays. I am not sure where to look or what could be wrong.

I'm not sure if I should pursue this here or if I should open a ticket through Debian Bugs. A recent update now causes mpd to segfault. mpd comes from the Debain armhf repository. I'm not sure how to determine if this is a hardware issue with my board somehow or if there is an interaction with a new kernel or if it's because the package updated the binary or a library. To make sure it wasn't something weird in my configuration I moved the conf file out of the way and re-ran mpd with the same result. If it helps, I can post an strace output of the issue. James

Hi all, I have applied 12 V to the DC input of my Cubietruck (bad thing). So now I want to repair / recover everything possible... Both DC-in and battery input seem to be short-circuited, but I cannot find the exact position. Power via USB-OTG works (successful boot). The fuse directly after the input has almost zero resistance (which is good) and I have checked all visible power-related parts (doc here) with a microscope (nothing looks burned, as far as I can tell all diodes/resistors/... work as they should). When checking the resistance of DC-in to ground it gives me 1,5 kOhm with a multimeter (don't have a second one here, but I gues…

Hi! I have banana pro, 5.15.93-sunxi #23.02.2 (bullseye), and use internal wifi adapter as a wifi client. The medium btw my client and ap is instable, there are frequent rate changes (6Mbps...54Mbps), so in order to get rid of it I need to set mandatory wifi rate no more than 6 Mbps. Give me the hint, please: 1. To set wifi rate strictly to 6 Mbps. I had tried iwconfig wlan0 rate 6M - I got "Error for wireless request "Set Bit Rate" (8B20) : SET failed on device wlan0 ; Operation not supported." . 2. To adjust 802.11n parameters (rate, number of spatial streams and so on). Thank you in advance, Aleksei

I'm sorry, I wrong section of the forum. Question here https://forum.armbian.com/topic/11607-h3-nanopi-neo-core-on-kernel-4x-audio-clickpop-dapm-how-disable-it/

There are any chance to get running a graphical desktop ambient? I've read on the forum that the kernel need some mod in order to work... Anyone get it working?

I updated an orangpiplus to version 5.23 Then I put in h3disp -m 10 -d for DVI output After starting no picture. The I downloaded 5.25 for orangepiplus. I connected a hdmi monitor which works with OPI PC but with OPIPlus no picture. Do anyone has a solution. THX

hi we are using legacy armbian xenial desktop wich work great with most rtl based dvb-t tuners we would like to add a new rtl2832 usb tuner with specific vendor id to be recognized : using x86 pc first we patched dvb-usb-ids.h with new vendor id then compiled and installed media_build ,result is success & dongle working well using orange pi one : building media_build give error . is there a way to patch the new vid thanks

Bpi M2 Zero Armbian 23.02.0 sid can't change volume alsamixer said: This sound device does not have any controls. How can I fix this issue ?

I am using an OPi+ 2e as an OMV box. Tonight I updated to 5.38 (4.14.15 kernel). After the update, the network connection drops between the router and the OPi at random intervals. At least once in a hour, sometimes within 10 minutes. Tried restarting the device and the router, to no avail.

Thought this might help other people, so I wanted to share: https://github.com/robbieh/Inky7-BananaPi

So I have an application which requires 1Mbps UART and wasted a few days trying to debug my board thinking that was the issue (was working perfect at 115kps), so I decided to scope the UART TX from the orangpi, and of course that signal was not actually working at 1Mbps. Scope is saying that its running at 750Kbps. Did some research and it looks like there is some sort of UART scaling frequency set in the driver, which excludes certain bitrates from running (check here https://github.com/jernejsk/linux/blob/master/drivers/tty/serial/sunxi-uart.c#L356-L381 ) Did some further tests and 460Kbps works fine as well as 1.5Mbps (so its not an issue w…

Guys! I have two of the original Pine64+ boards from the kickstarter (with LCD) and tried to launch the latest armbian image on them. Both of them freezes in u-boot after it tries to evaluate USB connections... Rather strange, they work well with the ancient original images. ``` U-Boot SPL 2019.10-armbian (Feb 17 2020 - 09:25:19 +0100) DRAM: 2048 MiB Trying to boot from MMC1 NOTICE: BL31: v2.2(debug):9560593-dirty NOTICE: BL31: Built : 09:25:06, Feb 17 2020 NOTICE: BL31: Detected Allwinner A64/H64/R18 SoC (1689) NOTICE: BL31: Found U-Boot DTB at 0x4095dd0, model: Pine64+ INFO: ARM GICv2 driver initialized INFO: Configuring SPC Controlle…

/sys/class/leds is not populated when running jammy with kernel 5.16.11

Hello all. I have a Nanopi due2 with Armbian. I've enabled my SPI in armbianEnv.txt file and with: overlays=spi-add-cs1 spi-spidev usbhost0 usbhost2 usbhost3 param_spidev_spi_bus=1 param_spidev_spi_cs=1 but when I try to use "/dev/spidev1.1", CS pin is active high by default not active low. how can I change it to active low.

Hi, I am new to nano-pi air neo. I am trying to get analog audio from the device. I had no success with the four connectors near to the camera connector. But if I connect the speaker to the DOUT of the audio, I get the sound but with lots of noises. How can I play audio in this device ? Am I missing something here ? Thank You.

Hello, When I can backup my system who is in the emmc ? in another sdcoard or in usb key to image file ? Thanks

hello everyone, I managed to make a WaveShare's 3.5" SPI LCD (actually designed for arduino) work on NanoPi Neo Core running on armbian Bionic 4.19.57, but now i"m having some issues with the touchpanel (using the same SPI). i'm trying to figure out how where to connect the touchpanel cs pin, which from what i have read suppose to connect to CE1. could someone help me find out which pin is it? maybe this will help: root@nanopineo:~# dmesg | grep "spi0.1" [ 8.334791] spi spi0.1: spidev spi0.1 1000kHz 8 bits mode=0x00 [ 8.335492] spi spi0.1: spidev spi0.1 1000kHz 8 bits mode=0x00 [ 8.348670] ads7846_device: spidev spi0.1 1000…

Hello! i'm new user in linux, and i have one problem with my display on chinese tablet. I install armbian img from Olimex Teres A64 img. Armbian is started but not work the display. How is the possibility to change or set video output for display? the file script.bin i don't find. Thanks alot for response.

Why do I keep getting negative CPU temperature readings? pi@orangepizero:~/klipper_config/config$ armbianmonitor -m Running unprivileged. CPU frequency will not be displayed. Stop monitoring using [ctrl]-[c] Time CPU load %cpu %sys %usr %nice %io %irq CPU C.St. 21:01:44: --- 0.18 4% 1% 2% 0% 0% 0% -3280°C 0/4 21:01:49: --- 0.17 2% 0% 1% 0% 0% 0% -2433°C 0/4 21:01:54: --- 0.15 2% 0% 1% 0% 0% 0% -2675°C 0/4 21:02:00: --- 0.14 4% 1% 2% 0% 0% 0% -2796°C 0/4 21:02:05: --- 0.13 2% 0% 1% 0% 0% 0% -2312°C 0/4 21:02:10: --- 0.12 3% 1% 2% 0% 0% 0% …

Hi, I'm running Armbian 5.38 with kernel 3.4.113-sun8i on an Orange Pi Zero. I'm writing an audio streaming application using the portaudio library for accessing the soundcard. It seems that the OPI Zero samplerate for the built-in microphone is configured at 24kHz instead of 48kHz. $ cat /proc/asound/card0/pcm0c/sub0/hw_params access: MMAP_INTERLEAVED format: S16_LE subformat: STD channels: 1 rate: 24000 (24000/1) period_size: 960 buffer_size: 1920 If I connect an external USB soundcard, I get the expected values: $ cat /proc/asound/card2/pcm0c/sub0/hw_params access: RW_INTERLEAVED format: S16_LE subformat: STD chan…

Hello I have an armbian on my Orange Pi PC2 Could you tell me, how I can detect in console is audo jack is plugged in or not?

Hello, I want to read data from UART3 on OrangePi One. I want to use UART3 (pin 8 & 10), so I enabled uart3 overlay at /boot/armbianEnv.txt. Now I expect to read data via minicom -b 115200 -D /dev/ttyS3 but I read nothing unfortunately. What am I missing? Any help is appreciated. I'm using Linux orangepione 4.19.38-sunxi (sorry, armbianmonitor doesn't generate link) Thank you, Regards

Hi. I would like to know if someone can help me. I was successfully able to compile armbian 6.6.30 with all of @Stephen Graf patches for my orangepi zero 3 having Full Audio working even on HDMI. see below for reference. Now I have a 2nd project. It runs the h616 with 2GB DDR3 RAM with AXP313. Can someone help me with a patch for the AXP313 on h616. Or alternatively, could my h618 orangepi zero 3 setup work if I patch it to run with DDR3? If so where can I find such a patch. Thanks in advance.

Things downloaded last week, When switching to alternative kernel is executed in Armbian Config, the screen set to 1280 x 1024 has been changed to 1280 x 720 and it was not able to be rewritten, so do not run the Switch to Alternative kernel and keep the 1280 x 1024 screen It is GQRX-SDR, since error-6 (even if blacklist maintenance is done) comes out, As a workaround, I ran Switch to the alternative kernel and avoided error-6. (I give up on screen 1280 x 720) But today, when downloading and installing the same software, the screen shows 1280 x 1024 It was able to be maintained. Sorry to make software, it is truly a hard work. But the object of today (201…

Hi guys , I am a newbie for armbian. I want to set my Orange Pi One as NAT server via USB connected to IPhone or Android Samsung . -------- Frist , I try to install Armbian_5.30_Orangepione_Ubuntu_xenial_default_3.4.113 Second, sudo apt-get install ipheth-utils Third, Connect to my iphone 5s via USB port and start my hotspot BUT I failed to set my phone as hotspot , I can't ping to www... I don't know what's wrong ? May any one give me a hand

I have OPI 2 running latest armbian mainline with MQTT broker and home assistant only. And I've started to experience hard freezes that only power re-plug helps :/ At first I thought that only networking was gone, but I've triggered hearbeat on red onboard led and this led is just stopping blinking on freezes. I've even got rid of Network Manager and setup iface in old good way via /etc/networking/interfaces. Then I've connected to serial console, run minicom in screen with logging to file. Just to see if serial console would show some kernel panic or so...but nothing, no output on serial console. Anyone experienced such behaviour? How to debug it? My sec…

Hi. I encountered problem, glimpsed through topics and didn't found anything similar so I am posting this one now. Had set up OrangePi Zero 256MB version with Domoticz and everything looked great. I have 2 internet connections, one is PON FTTH and the other one is VDSL. So I have 2 routers with RJ45 and 2 WiFi networks at home. One for my personal usage (ftth, locked router by ISP, static IP but no port forwarding) and the other one is for all home users (dynamic IP but full access to router options). I hooked up OPI using cat5e cable to my router and this connection is working perfectly reliable. I had XR819 hooked up to VDSL router as auxiliary connection (and con…

I seem to remember at one point thinking that U-Boot could be installed into the SPI on the a5e and then I could choose the boot order. Is that possible or did I just dream it? If it is, how do I install U-Boot into the SPI? Is there one specifically for the a5e?

Hi there, as I've connected my laptop e-mail client (Thunderbird) to my OPi3 I started to receive strange emails "from root ("cron daemon") to root": Subject "Cron <root@orangepi3> /usr/lib/armbian/armbian-truncate-logs" "error: syslog-ng:8 lines must begin with a keyword or a filename (possibly in double quotes) error: unattended-upgrades:10 lines must begin with a keyword or a filename (possibly in double quotes)" What should I do? Line 8 in armbian-truncate-logs is comment, so error is not there.

Hi, I have Orange Pi Zero, that don't have jack 3.5, I welded one jack 3.5 female in the correct pin and the music sounds good, but the voices sounds bad, what's wrong? Melody good, voice bad system: Armbian_5.25_Orangepizero_Debian_jessie_default_3.4.113 Sorry for my bad English

Just cancel the topic please. armbianmonitor.log.tgz

Is it possible to set Orange Pi Plus after "poweroff" command to boot-up by LAN impulse? I am using armbian ubuntu xenial OS. The LED-s on the Ethernet connector are on so maybe there is some chance.

Hi, as a newbie in this forum, I see a lot about HW, but almost nothing about OS Versions? Puzzled, where to place, I try to do this here: After installing Debian Buster & XFCE on an OPI-Zero, I'm getting frquently installation errors. Its always dpkg: unrecoverable fatal error, aborting: files list file for package 'xfce4-timer-plugin' is missing final newline E: Sub-process /usr/bin/dpkg returned an error code (2) like this one: ┌────────────────────────────────────────────────────────────────────┐ │ • MobaXterm 9.4 • │ │ (SSH client, X-…

Just tried Armbian 23.5 Bookworm, cli & minimal. Both report the same in the console. Board works just fine with official img from www.friendlyelec.com Here is the terminal output.

Hello I have orange PI win plus I just share Disk USB on Lan. I would like to share this disk use orange wi-fi to my TV Short Need see files on TV use WI-Fi connection. Could You advice how to proceed thaht ?

Hello Everyone , Can anyone please guide me . I need to use nano pi neo's USB pins(2.54mm x 2 header pins) and looking for resources related to it. I am using armbian OS on it. I am struggling with it , I read many resources on the web but none of them provide detailed information. Any help will really be appreciated !! Thanks so much!!

Hi, I recently reinstalled an orange pi 2+ with Armbian Stretch mainline kernel 4: root@ted1090-7:~# uname -a Linux ted1090-7 4.14.18-sunxi #24 SMP Fri Feb 9 16:24:32 CET 2018 armv7l GNU/Linux I also installed it on EMMC (this way, with this u-boot-sunxi-with-spl.bin). Now this orange pi crashes every couple of days (sometimes with a couple of hours). This orange pi use to run with Armbian legacy 3.x kernel on EMMC without any issue: pi@ted1090-6 ~ $ uname -a Linux ted1090-6 3.4.113-sun8i #18 SMP PREEMPT Wed Jan 24 22:10:49 CET 2018 armv7l GNU/Linux Exactly the same applications are installed (dump1090 and dump1090-tools). T…

Seems like it won't boot and stucks at: INFO: PMIC: DRAM voltage: 1.50V INFO: Continiously reboot. Can't understand why. Any advice?

Board: OrangePi ZeroPlus2 H5 I need display some graphics using LCD, resolution is about 640x480 If armbian flashing with desktop, then the usable memory (512MB) is not enough for my app.... So, in console mode, does some libraries could help me to write pixel to display via HDMI? and it configurable(or test succeeded) in my board? Thanks!

Hi, When Armbian starts loading kernel (just after showing loading kernel), the screen just gets scattered and Cubieboard2 shuts down. The Mainline on the other hand boots without a problem. Can I do something to get more info about what causes the problem, as I would like to be able to run the Legacy 3.4.113 version. The scatter is similar to this image: Thanks!

Hi everyone, Recently I have installed armbian Bookworm on my orangepi pc and i noticed that the LEDs were not working. The system is booting with no issue and I have connected to wifi and did an initial software update and bootloader update and still the issue is persisting. So I clean installed jammy on the pi to check it again and still the led was not working. Please help me out on this issue, and if anything more is required please do let me know.

Only message I have received is: ----------------------------------------------------------- Case-1: Boot from SD Card"Cubian-nano+headless-x1-a20.img" Serial FTDI Output: U-Boot SPL 2014.01-rc1-09161-g108ec3f (Jan 20 2014 - 05:48:16) Board: Cubieboard2 ----------------------------------------------------------- Case-2 Without SD Card: Serial FTDI Output: HELLO! BOOT0 is starting! boot0 version : 3.0.0 dram size =1024 ----------------------------------------------------------- Where Cubie2board has android OS before the mess up. Can not figure out how this thing happe…

Hello, Recently I bought my first orange pi one and I downloaded the xenial desktop specifically so that I could have an xserver preinstalled to what I wanted to transform into an access point. I had realized that all realtek wifi dongles would cause a kernel crash once you try to connect to an access point with them. I had followed instructions to rebuild the orange pi with the dev packages that are found on its download page, and it worked the first time, allowing me to continue with my work. Long story short I ended up re-imaging the sd card and now I can't get the dev version to work again. It won't boot once I install the packages. I am wondering if somet…

Hi @ertugrul and @afaulkner420. I was trying to create a bootable drive for the orangepi 3 lts and it always fails in validation in balenaEtcher. I tried even with that and it does not seems to work. The non-desktop versions worked however. I didn't see any error messages during the flashing and everything else seemed to work well. Thanks, Ashish

Hello everybody! I'm trying to make a carPC based on Armbian (5.25 Bananapi Ubuntu xenial default 3.4.113 desktop) and a banana pi, almost everything works except for sound in navigation. root@bananapi:~/7ways# ./7ways root@bananapi:~/7ways# ALSA lib pulse.c:243:(pulse_connect) PulseAudio: Unable to connect: Connection refused root@bananapi:~/7ways# ALSA lib pulse.c:243:(pulse_connect) PulseAudio: Unable to connect: Connection refused root@bananapi:~/7ways# ALSA lib pcm_dmix.c:968:(snd_pcm_dmix_open) The dmix plugin supports only playback stream root@bananapi:~/7ways# ALSA lib pcm_dsnoop.c:545:(snd_pcm_dsnoop_open) The dsnoop plugin supports only capture stream root@b…

Hi, I need a help. I have waveshare 4inc lcd touch play display but I don’t know how to enable touch play. Please Help me.

H there, I am using OPi0 TV out. I know, there are hardcoded PAL and NTSC resolutions only. But I would like to ask, if there is any tutorial how to build it up with my own lower resolution e.g. 320x240? (i know I should recompile driver for it but any help where to start is appreciated) Many thanks.

I have a orangepi board with H6 , it have BSP android 7 firmware. Now , I can enter BSP uboot shell. want to find a way to boot mainline kernel instead of BSP kernel. How to do that ? Any help would be much appreciated. EDIT: On amlogic arm64 board can use go command to load mainline u-boot , Does allwinner board have the similar way to do that ?

Armbianmonitor: I had use armbian-config to change the dts for change pin start status. it worked. but just work when kernel load. it don't effect the uboot. did i missing some step? or it's because my uboot is too old? Thanks, mika

I am running cubitruck wheezy 7.5 from 2014, Kernel 3.4.104 for over three years as homeserver with VGA display. How can I activate HDMI for a new display. (I cannot reinsall the whole system, growed up for all the years) I already changed the settings in fexfile: [disp_init] disp_init_enable = 1 disp_mode = 0 screen0_output_type = 3 screen0_output_mode = 6 screen1_output_type = 3 screen1_output_mode = 6 also changed fex to bin and reboot, but no HDMI-output Can anybode give me a hint?

I've download Armbian_5.25_Cubieboard2_Ubuntu_xenial_default_3.4.113_desktop (Ubuntu desktop – legacy kernel ) and copie with dd on a 32GB EVOSamsung sd-card. After boot until loading Kernel , the Loading crashd and the board goes off. What can i do? best regards mtpmoni

I have installed Armbian Stretch mainline kernel 4.14.y on Orange Pi +2E. After shutdown the board, it seems that the network led is still on (yellow) and the green led keeps blinking. Is this normal? Can this be turned off?

On Nanopi Neo Core 2 LTS (Allwiner H5) : - Armbian Stretch stock : speedtest Down:90Mb/s Up:80Mb/s - Armbian Buster stock : speedtest Down:90Mb/s Up:4Mb/s Maybe regression in network drive ? I was not able to find any information on this issue ... Could you help me please ?

Hi, After installing latest version of Armbian 5.59 Stretch, I found that CPU temperature was shooting up too high, and I figured out that the GPIOL6 controlling the VDD_CPUX between 1.1V and 1.3V is not set properly as a result the Pullup resistor R455 is holding the FET gate always high and it is always running by default at 1.3V, even though scaling_max_freq was set 912MHz. After manually switching the GPIO to OUTPUT_LOW the temperatures aren't going that high anymore. Just thought the DEVs should know. Thanks

Hi, I see in the /usr/lib/armbian/armbian-firstrun script that it runs the command: update-rc.d ap6212-bluetooth defaults for nanopi neo air (and some other boards) However if I try to run this script sudo /usr/lib/armbian/armbian-firstrun start The result is: update-rc.d: error: unable to read /etc/init.d/ap6212-bluetooth setfont: ERROR kdfontop.c:183 put_font_kdfontop: Unable to load such font with such kernel version setfont: ERROR kdfontop.c:183 put_font_kdfontop: Unable to load such font with such kernel version setfont: ERROR kdfontop.c:183 put_font_kdfontop: Unable to load such font with such kernel versio…

When testing my most recent builds using the Armbian build framework I found that I was experiencing a constant load greater than 1.00. At first, I thought this is probably normal to have a load during the system boot but after waiting over 10 minutes I found that the load did not decrease. Firstly, I used HTOP but could not find a process that was heavy utilising the CPU with the relative CPU usage show as low. Next I tried using TOP which revealed a process called kworker: freezeable_power. Trying to search for the issue I did not find much until I came across this old forum post that described the same issues I was having: https://forum.armbian.com/topic/75…

I just discovered that /usr/bin/su in my Armbian: v26.2.1 for Orange Pi PC running Armbian Linux 6.12.58-current-sunxi is a x86_64 binary: $ ls -l /usr/bin/su -rwsr-xr-x 1 root root 50800 Mar 6 13:10 /usr/bin/su $ file /usr/bin/su /usr/bin/su: setuid ELF 64-bit LSB executable, x86-64, version 1 (SYSV), statically linked, no section header I installed the rust version, su-rs, but I thought it would be useful to warn about this. I checked /usr/bin and /usr/sbin and this is the only x86-64 executable.

Libre software refers to the free software foundation's guidelines. Can you make an entirely libre software armbian version work on the orange pi one or other orange pi computers? How good will it work? About the orange pi one which devices will not work if only libre armbian software is installed? Notice this https://www.kickstarter.com/projects/bootlin/allwinner-vpu-support-in-the-official-linux-kernel/description If orange pi computers can work using libre software armbian, then how do they boot? Do they use uboot? Thanks.

hi how can i enable the tv out in orange pi PC+, I need to do a kiosk mode thanks

Hello Respected Supporters, After upgrading to Armbian 26 (kernel version 6.12.58), the onboard network card (end0) experienced a severe degradation in transmission performance (reduced to approximately 1/10 of previous levels). Upon investigation, it was discovered that the kernel driver (dwmac-sun8i) has locked all hardware offload features (TSO/GSO/Checksum), forcing the CPU to handle all processing in software. root@orangepi3:~# uname -r 6.12.58-current-sunxi64 root@orangepi3:~# dpkg --list | grep linux-image ii linux-image-current-sunxi64 26.2.0-trunk.48 arm64 Armbian Linux current kernel image 6.1…

Hi: I was using version 5.30 at orange-pi-pc and orange-pi-one. it is very stable. I saw some irq complain about 5.35, but I don't know if these issues affect H3 boards. I use the boards as headless server with openvpn and some DI/DO. is version 5.35 stable enough for the work? or I should stick with 5.30? thanks a lot for advice.

Hello, I have just updated to the latest Debian Server image of NanoPI NEO 2. When connecting via Serial and using vim.basic/tiny I got the following strange behaviour: As soon as I enter the insert mode a newline is inserted automatically. This does not happen when connecting via SSH. So far I haven't experienced this behaviour with my previous image. Any ideas? Kind regards, Markus NB: textwidth is set to 0 (disabled).