Rockchip

Hey folks, So here's the setup I have: I have an Orange Pi 4B running the Orange Pi 4 image and kernel 5.6.17-rockchip64. I have an Orange Pi 4 running the Orange Pi RK3399 image and kernel 5.4.26-rockchip64 (cause when I got it, the Orange Pi 4 images weren't out yet). The OPi4 is running just fine. I imagine that I'm running the wrong DTB and that not all the hardware is working properly -- but the hardware I need is working just fine. The OPi4B is another story. It'll boot just fine, and it'll run just fine for days/weeks on end -- as long as I don't put it under any sort of heavy CPU load. But if I start running anythi…

Hello, did somebody already have success connecting a Raspberry Pi 7 inch display to the current Armbian build? I already tried to add this overlay via armbian-add-overlay, but this did not work. What am I missing? Thank you for your help!

This overlays settings worked well until I have compiled my own .dtbo file and call it with overlay=..xyz... , after that all yet working overlays stopped working, even if I removed them. The boot process now skips this overlay settings. After examination, I have found file "/boot/boot.scr" and "/boot/dtb-5.4.44-rockchip64/rockchip/overlay/rockchip-fixup.scr" had some garbage characters at beginning. I didn't change anything, neither I did open them before, those files simply got garbage. After deleting the garbage chars, it won't boot anymore. Before I had tried also spi-spidev and spi-nor

i2cdetect -l i2c-1 i2c rk3x-i2c I2C adapter The i2c-1 device works fine and there is a working sensor attached. Trying to get the i2c-0 device up and running. Added overlays=i2c0 to /boot/armbianEnv.txt but it didn't work. There doesn't appear to be a file with that name so I'm not sure if this doesn't exist or if there is a package that needs to be installed. find / -name '*.dtbo' 2> /dev/null | grep 3308 /boot/overlays/rk3308-uart2.dtbo /boot/overlays/rk3308-uart1.dtbo /boot/overlays/rk3308-uart0.dtbo armbian-config flashes this in the system->hardware menu …

I did upgrade my NanoPi-R6C and see that there are no overlays in the linux-image-6.14.0-edge-rockchip64 Debian package; they were there in 6.14.0-rc4-edge-rockchip64 So there is no folder: /usr/lib/linux-image-6.14.0-edge-rockchip64/rockchip/overlay Is this on purpose or some mistake?

Picked up a P1 Pro the other day. Used the P1 installer, and it boots fine. However WiFi and m.2 dont work ( no m.2 makes it useless for me.. WiFi, i can use a dongle ) so i assume the device tree needs changed. Still a newbie at this, so unsure how i can find or extract the tree from somewhere else. They do have a couple of official builds of other OS, but not real sure how to get it from there, if you even can. Lots of googling for a tree has come up empty.

Anybody have success with panfrost? kernel module and userspace module I have firefly 3399( 5.4.8-rockchip64) board And I don't see panfrost in dmesg or lsmod Any idea?

https://rosenzweig.io/blog/a-panfrostian-october.html The dev machine they used seems to be a rk3399 based chromebook. Looks like they will get a working panfrost after all!

Hello, thank you for your new image work. However, although I wrote to write your image to emmc or sd card, the device does not respond at all. The previous version Armbian_23.11.1_Panther-x2_bookworm_current_6.1.63.img.xz works normally on my panther device. The new version and minimal iot version do not boot at all. I kindly request your information about Armbian_community_24.11.0-trunk.25_Panther-x2_bookworm_current_6.6.47_minimal .img.xz.

Is it possible to activate PCIe ASPM L1 substates with the NanoPi R6C / RK3588s Soc in general? > lspci -vvv | grep ASPM LnkCtl: ASPM L1 Enabled; RCB 64 bytes, Disabled- CommClk+ L1SubCap: PCI-PM_L1.2+ PCI-PM_L1.1+ ASPM_L1.2+ ASPM_L1.1+ L1_PM_Substates+ L1SubCtl1: PCI-PM_L1.2- PCI-PM_L1.1- ASPM_L1.2- ASPM_L1.1- My M.2 NVMe SSD supports all L1 substates but setting pcie_aspm.policy to "powersupersave" has no effect. Max is "powersave" to activate ASPM L1 and that works. Is this a limitation of the SoC or just not implemented in the armbian driver / kernel?

I don't know where else to share this so I'm putting this here. The board recognizes and tries to the load the driver for an AR9462 QCNA222 M.2 WiFi card, but fails. I tried a custom build found on Radxa forum/github, built Armbian myself, and tried an official build. All resulted in the same error. Card was tested and working correctly on 2 different Debian x86 machines. lspci 0000:00:00.0 PCI bridge: Fuzhou Rockchip Electronics Co., Ltd Device 3566 (rev 01) 0000:01:00.0 Network controller: Qualcomm Atheros AR9462 Wireless Network Adapter (rev 01) 0002:20:00.0 PCI bridge: Fuzhou Rockchip Electronics Co., Ltd Device 3566 (rev 01) dmesg ath…

About a year ago, I installed the OpenMediaVault image for CM3588-NAS from here: https://www.armbian.com/nanopc-cm3588-nas/ The image is debian-bookworm, which has since become oldstable, while trixie is the new stable. Is it possible to upgrade the distribution and move to trixie packages, even though there are no trixie images for CM3588-NAS? In theory this seems completely feasible as my apt configurations seem completely standard with something like deb http://deb.debian.org/debian bookworm main contrib non-free non-free-firmware and deb [signed-by=/usr/share/keyrings/armbian.gpg] http://apt.armbian.com bookworm main bookworm-utils bookworm-deskt…

I've installed pluseaudio, mpg123 and attached pin 7, 8 with pin 2 to an external speakers(left using pin 7 and right using pin 8). However, when running mpg123 test.mp3, the file was played successfully but no audio was heard. Any means of debugging what could have gone wrong?

Hi community, I am experiencing an issue reinstalling Armbian on my Helios64. I tried all methods including booting from an SD card, flashing the image onto the eMMC directly but every time I boot, I get kernel panic (flashing status light). I also can't connect to the USB via TTY to diagnose the issue. My macbook keeps detecting the /dev/tty.usbserial-DT03OEIM and the next second it is gone. I wanted to install the original Buster image but I cannot find it anymore in any of the archives. It's kind of disappointing because what's the purpose of an archive then if not hold on to an image for a few years. My current theories…

Hello I'm running a Plex server on my Helios64 and when I turn on subtitles it buffers every other second making the movie unwatchable. Is this a known issue with a fix? Sincerely Magnus Nygren

Hello to everyone Trying to use armbian on RockPi 4C plus. Got kernel OOPS. Kernel crushes in different moments: mostly during systemd units starting or just after boot finished. Backtraces are different (no common). Faulty images: 1) From the https://www.armbian.com/rockpi4/ For Model C+ here: https://redirect.armbian.com/rockpi-4cplus https://mirrors.dotsrc.org/armbian-dl/rockpi-4cplus/archive/ Armbian_22.11.1_Rockpi-4cplus_bullseye_current_5.15.80_minimal.img 2) Built by myself Armbian_22.11.2_Rockpi-4cplus_bullseye_current_5.15.84_minimal.img Armbian_23.02.0-trunk_Rockpi-4cplus_bullseye_edge_6.1.8_minimal.img Armbi…

I have recently bought a rockpi5 and i was looking all over the internet for a POE hat module to power it up . However i was unsuccessful so far. I have tried the poe hat i had for my rockpi 4 B but it doesn't physically fit so my question is will a POE hat for the rockpi 5 be anytime soon released ?

Would it be easy to port Armbian on the Pipo M6 Pro and integrate additional device drivers to provide support for the touchscreen, the front and back camera and the sound? https://www.geekbuying.com/item/Pipo-M6Pro-GPS-Android-4-2-RK3188-Quad-Core-1-6GHz-Tablet-PC-9-7-inch-Retina-Capacitive-Touch-Screen-2048-1536-2GB-16GB-319264.html Is this something feasible in the first place? Anybody out there who want to help me on this project?

Hello, I have had a nanopc-t4 and a few others for a long time now. I have tried to create a working dtb for it a few different times. My understanding of device trees is superficial I have not had good success. I have read the kernels DT docs many times. I can of course run an ancient 4.19 kernel but I would much rather be at the edge. Currently I've got armbian 22, but no edp. I can boot Friendly's lubuntu and then the edp works. Although it is edp or hdmi not both. I must unplug the edp to get the hdmi port to work. Which is really undesirable. If I remember, it can only enable 2 of its 3 hdmi ports at a time, so that is likely a simple DT c…

I have noticed that the NanoPi M4V2 has an OPP table which causes the device to overclock; the table is suitable for an RK3399K SoC, but the M4V2 has a standard RK3399 SoC with maximum speeds of 1.42GHz for the A53 cores and 1.80GHz for the A72 cores (despite FriendlyArm themselves citing the K speeds in marketing material, which is incorrect). I believe that this may also be causing stability issues with my unit, however I will be performing additional testing (I cannot find where it is getting the "extended" OPP tables from, so I am limiting it via cpufreq-set and testing for stability.) Does anyone have any insight or ideas?

Good job with Armbian, I just can't find the power management, DevTerm A06 has batteries. Maybe I'm blind, please tell me where to look.

Greetings to the happy owners of the rock 5b. Tell me if the rock 5b turns off the power to all its components when shutting down. I understand that the power from the external power supply is still being supplied. And what happens to the devices on the board: ssd, fan, wifi etc.

Hello, When I would like to start my PPP connection my Kernel says missing Module: I use the RockPi 4b with the Image https://dl.armbian.com/rockpi-4b/Ubuntu_bionic_dev_nightly.7z root@rockpi00001:/opt/LTE# pppd call gprs & root@rockpi00001:/opt/LTE# Couldn't open the /dev/ppp device: No such file or directory modprobe: FATAL: Module ppp_generic not found in directory /lib/modules/4.20.13-rockchip64 pppd: You need to create the /dev/ppp device node by executing the following command as root: mknod /dev/ppp c 108 I have created the mknod /dev/ppp c 10…

EDIT: Just realized I posted this in the bug tracker forum. My apologies! See:

Hello, So is anyone aware of a way (like a text file)to populate with values etc to bypass the need to be interactive during first boot? Since this device is displayless and I hate to pop the case every time to hookup the console cable when setting up a half dozen devices. I imagine I could alter the first boot script, but was just wondering if there was another way. Thanks! Richard

Hello. I'm looking for a PREEMPT_RT patch for your linux-rockchip kernel. I've tried to apply an rt101 patch for 5.10.209 (branch rk-5.10-rkr8), but it has so many differences (especially, scheduler-related)... I've spend a lot of time resolving the conflicts manually but my kernel keeps crashing on start. Please, help me...

Tried installing rock 4se image and rockpi 4b image. Both blink the blue led but none gives me hdmi output or network connection. What is the correct image for this sbc? The silkscreen says rockpi 4 SE Thanks

Hi, I have tried booting multiple different images from Armbian, But when I bootup I get the message below. I have tried 8 different charger, 5V 3A, PD 3.0, 35W charger, 10W charger... I'm using a Sandisk Extreme SD card, I have flashed the board using both the SPI found from radxa wiki, and the rkspi_loader.img found from github. If there is any other information, please let me know. Should be noted that I took a picture and used image-to-text to get the output below. 15.1599071 usb usb?: Manufacturer: Linux 5.10.110-media xhci-hcd 15.1616491 usb usb?: SerialNumber: xhci-hcd.9.auto 15.1636651 hub 7-0:1.0: U…

I have the newest Armbian 28.08.0-trunk image running on a NanoPi R6C with a 4TB NVMe SSD. The NanoPi is only connected to power and 1G ethernet via the 1G WAN port. When using the machine as NAS with Samba and a Windows client connected there is a strange problem when receiving large files. The files are stored on the NVMe SSD with ~450MB/s read/write via PCIe 2.1x1. When transmitting files from the NanoPi to a SMB client the 1G ethernet is maxed out but when receiving files the connection drops down to ~60 MB/s every few seconds. This instantly gets fixed when using the 2.5G LAN port instead of the 1G WAN port. On that po…

Today I updated and upgraded my system, and after a reboot 'apt list' did no longer work. It shows 'Listing... done', and then uses 100% CPU on a single core, without producing anything. According to strace it's looping on reading a file: openat(AT_FDCWD, "/var/lib/apt/lists/deb.debian.org_debian_dists_buster_main_binary-arm64_Packages.lz4", O_RDONLY) = 28 read(28, "\4\"M\30@@\300\206z\0\0\370\377\31Package: 0ad-data\n"..., 65536) = 65536 read(28, "ta$E\17p\2+\377\21c376d3f140540d9424753d"..., 65536) = 65536 read(28, "a5180e3e2d3f503ddcb5dd7b93\201\2\2\275\0\17"..., 65536) = 65536 read(28, "\2\3700071880bc23623a4ea3664b773a1b6"..., 65536) = 65536 read(28, "\f1'da?\2Jd…

Hello guys, you know that armbian has a problem that sometimes when the system boots, the ethernet interfaces fail. The led turns on indicating that it detected the interface but it is totally blocked. It does not work, no method of restarting the interface. The only solution is to restart the computer...

I have Rock Pi4B and printer 3D Sapphire Pro from Two Trees. In the Armbian I want use print server OctoPrint. Instalation OctoPrint was easly and server works but don't connect to my printer. When I use lsusb i see Bus 004 Device 003: ID 1a86:7523 QinHeng Electronics HL-340 USB-Serial adapter. In the list dev/tty* don't shows me mounting port to this device. I try defined udev rules: SUBSYSTEM=="tty", ATTRS{idVendor}=="1a86", ATTRS{idProduct}=="7523", SYMLINK+="sapphire" or SUBSYSTEM=="tty", ATTRS{idVendor}=="1a86", ATTRS{idProduct}=="7523", ATTRS{devpath}=="1.2", SYMLINK+="sapphire" but without fine result. I'm rookie in linux and armbian and don't h…

Hello People. First of all, thank you to all the people that puts work and time into this project. It's my first time posting here. I've been trying to solve this problem by myself since this board it's unsupported now, but I had no luck. The thing it's, I can't get the linux to recognize properly the PlutoSDR, I get this errors in dmesg. [ 19.885514] usb 4-1: new high-speed USB device number 6 using xhci-hcd [ 20.035134] usb 4-1: Dual-Role OTG device on non-HNP port [ 20.035310] usb 4-1: set a_alt_hnp_support failed: -32 [ 20.161463] usb 4-1: new high-speed USB device number 7 using xhci-hcd [ 20.311139] usb 4-1: D…

Hello, This is more informative. I saw the following news: https://www.armbian.com/newsflash/armbian-v25-2/ After seeing that you fixed USB3, I decided to update. For me, USB3 is not working. Stopped working and rngd If any additional information is needed, I will share.

People, help install the system on eMMC Rock Pi 4 Bv 1.3. Installed the system "Arabian_20. 05.4_Rocky-4b_focal_current_5. 4. 46_desktop" on SD, installed eMMC on the Board, started the system and updated it. Then I tried two options for transferring the system to emc: 1) (https://docs.armbian.com/User-Guide_Getting-Started/) sudo nano-sata-install - dd if= / dev/zero of= / dev/mmcblk2 bs=1024 seek=8 count=1; 2) armbian-config - boot from SD, system on SATA / USB. But both options failed. I read here two branches with a discussion of this problem, but I did not succeed. But this is because I am not a very experienced Linux user. Please give me a n…

Howdy With a p2 that already had ubuntu installed on the ssd using the firefly technique, it seemed time to upgrade using to armbian. Installing the new uboot went fine. It is not clear how to confirm it. The command did not error. However using the jammy 22.08 images, the uuid does not appear to be on the SD card. At this time I do not have a serial cable. However the image shows sum of the situation. Any help appreciated including advice on rj45 to serial cable. Thanks.

TL;DR: How to make HDMI screen with custom resolution work? Including boot log/boot splash screen. How to configure auto use of/auto switch to newly connected display? Means moving tty/X Session to connected display like it works on e.g. Ubuntu desktop. Why HDMI screens with non standard resolution works well on kernel v5.x but stop working on v6.x ones? Where are HDMI related I2C interfaces in Armbian? Full version: In theory host system (SBC, laptop, PC) should detect new HDMI device connection, load EDID data from screen and use it to configure video output (resolution, timings etc). In practice it works well for Ubuntu deskto…

Anyone know a solution for this? Linux vlib2 5.9.14-rockchip64 #20.11.4 SMP PREEMPT Tue Dec 15 08:52:20 CET 2020 aarch64 aarch64 aarch64 GNU/Linux Jan 08 14:27:05 vlib2 systemd[2481]: Starting Timed resync... Jan 08 14:27:05 vlib2 profile-sync-daemon[11324]: WARNING: Do not call /usr/bin/profile-sync-daemon as root. Jan 08 14:27:05 vlib2 systemd[2481]: psd-resync.service: Main process exited, code=exited, status=1/FAILURE Jan 08 14:27:05 vlib2 systemd[2481]: psd-resync.service: Failed with result 'exit-code'. Jan 08 14:27:05 vlib2 systemd[2481]: Failed to start Timed resync.

Using Image "Armbian_community_25.5.0-trunk.185_Orangepi5-max_bookworm_current_6.12.17_minimal.img.xz" on orange pi 5 max, the fan connected to the designated 1.25mm pwm fan connector won't do anything at all regardless of the cpu load. Just to verify the connector was fine I tested the same on the same board with the same fan, using orange pi's image "Orangepi5max_1.0.0_ubuntu_jammy_server_linux5.10.160" and the fan worked fine under cpu stress.

i found a running task on friendlyelec desktop called "pwm fan" But i found no more informations how to connect a pwm fan to the Nanopi M4 Which pins are needed to connect ? Can i use a normal 5V Fan or is a special Fan needed ? Anyone aware of this ?

Hey there, had anyone any success enabling PWM to control a PoE hat [1]? I tried a few overlays but no luck. ``` rock-3a-worker-1:overlay:# cat /boot/armbianEnv.txt verbosity=1 bootlogo=false overlay_prefix=rk35xx fdtfile=rockchip/rk3568-rock-3a.dtb rootdev=UUID=f0751d3c-c5c2-4ced-a989-772c2ad130a4 rootfstype=ext4 overlays=w1-gpio i2c7 i2c8 extraboardargs=nvme_core.default_ps_max_latency_us=0 usbstoragequirks=0x2537:0x1066:u,0x2537:0x1068:u ``` I also built mraa with the following: ``` IMRAA=ON FTDI4222=OFF BUILDCPP=ON BUILDTESTS=ON BUILDSWIG=ON USBPLAT=ON ONEWIRE=ON INSTALLTOOLS=ON BUILDSWIGPYTHON=…

Hi everybody, I installed Deb 12 Cinnamon Armbian flavor on an Orange PI 5 and Orange PI 5 Plus. This: dl.armbian.com/orangepi5-plus/Bookworm_current_cinnamon-backported-mesa I want to test 'virt-manager' but qemu is not available for installation. Error on console: packages are updated me@orangepi5-plus:~$ sudo apt install qemu [sudo] senha me: Lendo listas de pacotes... Pronto Construindo árvore de dependências... Pronto Lendo informação de estado... Pronto package qemu is not available, mas é referenciado por outro pacote. Isto pode significar que o pacote está faltando, ficou obsoleto ou está disponível som…

I am trying to provision QEmu/KVM to run a Kubernetes cluster based on Ubuntu Cloud Image instances. I am using the latest release of Armbian on 16GB Rock 5B. Release kernel. After a relatively smooth setup I am able to provision and run instances. virt-install --connect qemu:///system --virt-type kvm --name virt1 --ram 2048 --vcpus=2 --os-variant ubuntu22.04 --disk path=/root/VMImages/virt1/virt1.qcow2,device=disk --disk path=/root/VMImages/virt1/virt1-seed.qcow2,device=disk --import --network network=default,model=virtio,mac=$MAC_ADDR --noautoconsole Everything works and I am able to log into the instance, but for some reason I am see…

I have some questions about the Linux images that Ayufan built for the Rock64 board. Not really technical issues so I did not think they should go on the Github page. If this is not the appropriate place for these, let me now and I'll remove this post. Also, if this is not the place, where should I be asking these types of questions? I just downloaded the new PRE-RELEASE version of Debian Stretch from the Github page (Yes, I know it's bleeding edge, but just experimenting for now). Specifically the stretch-minimal-rock64-0.6.5-152-arm64 image. I just burned it to my eMMC board. Will boot and see how it all works tomorrow. There are a number of…

First of all thanks to the people maintaining armbian for helios64. I recently upgraded (well I reinstalled) to trixie and everything mostly runs stable for me. However I have a problem with the 2.5GB adapter. It is connected to a 2.5GB switch and when for example running iperf3 I get proper results close to 2.5 GBit. So in general it seems to be running ok. I have a DLNA server (minidlna) running on that machine and when I stream from my TV (streaming via VLC from my laptop triggers the same problems) the network connection drops for a moment and works again after a few seconds (which you can guess is super annoying when watching something). I am not sure wha…

At least for legacy kernels, it possible to use Radxa's overlay for the 25W PoE hat. This should allow you to use the PWM fan on the PoE hat. #!/bin/bash # Install linux headers apt-get install -y linux-headers-legacy-rk35xx # Download and compile the device tree overlay h=/usr/src/linux-headers-$(uname -r) wget https://raw.githubusercontent.com/radxa/overlays/f2679399887b678dec62cb50cb44c767a2bcb293/arch/arm64/boot/dts/rockchip/overlays/rock-5b-radxa-25w-poe.dts cpp -nostdinc -I $h/include -I $h/arch -undef -x assembler-with-cpp rock-5b-radxa-25w-poe.dts | dtc -I dts -O dtb -o rock-5b-radxa-25w-poe.dtbo # Install device tree overlay mkdir -p /…

Hey, Has anyone managed to capture image from this camera? `media-ctl -p` shows this device, that mentions the camera name: - entity 63: m00_b_imx415 3-001a (1 pad, 1 link) type V4L2 subdev subtype Sensor flags 0 device node name /dev/v4l-subdev2 pad0: Source [fmt:SGBRG10_1X10/3864x2192@10000/300000 field:none crop.bounds:(12,16)/3840x2160] -> "rockchip-csi2-dphy0":0 [ENABLED] But that's it. No luck with libcamera nor v4l2-ctl. The `rock-5ab-camera-imx415` layer enabled.

The Radxa bullseye image looks to boot fine, but Armbian forky does not boot at all.

I have been trying to run the bookworm minimal image for the Radxa Rock 2F with poor results. Wifi stops working after an "armbian-upgrade" and after apt upgrade. Doing an nmcli -p r results in WIFI-HW missing response. It seems to me that after the upgrade, something is wrong with the aic8800 driver module. Unfortunately I am too ignorant to be of much help, but any suggestions would be most welcome. Thank you.

My Radxa Rock 4SE does not boot since community-build 25.8.0-trunk.228. Current local builds based on the "main" branch are also affected. The bootloader log gives the following error: Checking hash(es) for config config-1 ... OK Checking hash(es) for Image atf-1 ... sha256+ OK Checking hash(es) for Image u-boot ... sha256+ OK Checking hash(es) for Image fdt-1 ... sha256+ OK Checking hash(es) for Image atf-2 ... sha256+ OK Checking hash(es) for Image atf-3 ... sha256+ OK ERROR: not expected type found -4001165690437497392 This source suggests, that it might be a problem with the ATF. However, my knowledge about details of the boot process are…

Hey Everyone, I'm sorry if this has been answered elsewhere. I recently purchased a Radxa Rock 5B+ and I installed the debian bookworm test build provided by radxa on there getting started page. https://docs.radxa.com/en/rock5/rock5b/getting-started/install-os/boot_from_sd_card https://github.com/radxa-build/rock-5b-plus-6_1/releases/download/rsdk-t4/rock-5b-plus-6_1_bookworm_kde_t4.output.img.xz I was mainly intent on using the HDMI with gstreamer using custom resolutions, but found that when using custom resolutions they cannot use the YCrCb pixel format only RGB8. It seems based on the following comment that RGB8 videoconvert hardware …

Hello, I just flashed the latest minimal img from the github releases (Armbian_community_26.2.0-trunk.7_Rock-3c_trixie_current_6.12.58_minimal.img.xz) but I see no output on hdmi and it gets stuck at login, nothing I type works.

Hi, I am trying out Armbian 26.2.0-trunk.592 nightly (trixie) on a Radxa Rock PI 4b+ The community supported image boots fine and it is no problem to install Armbian on the on-board eMMC flash, but the installed NVMe SSD on PCIi is no recognised. It looks like the whole PCIe bus is not initialised properly during boot. in the kernel log I see: [ 0.062396] /pcie@f8000000: Fixed dependency cycle(s) with /pcie@f8000000/interrupt-controller [ 2.160749] rockchip-pcie f8000000.pcie: host bridge /pcie@f8000000 ranges: [ 2.160771] rockchip-pcie f8000000.pcie: MEM 0x00fa000000..0x00fbdfffff -> 0x00fa000000 [ 2.160779] rockchip-…

hi all. I recently updated my Kurnel and rebooted my Helios64. when it loaded in to OMV i noticed my raid drive is missing. i can still see the disks just not the raid drive . Checking on the array i can see it failed with an error 524. Would love some suggestions on how to repair the array. below is the details i was able to get,.. sorry for the large info dump root@helios64:~# mdadm --run /dev/md0 mdadm: failed to start array /dev/md0: Unknown error 524 root@helios64:~# mdadm -D /dev/md0 /dev/md0: Version : 1.2 Creation Time : Mon Dec 14 16:49:07 2020 Raid Level : raid0 Raid …

Hello All, I recently bought Orange Pi RK3399 and had some problems with it. At this moment I've solved most of them, but still no luck with such an old OS like Ubuntu Server 16.04 or Debian 9 which were provided by the manufacturer (images to flash). What I am thinking now is to move this board to Armbian. Will it work? How should I in this case organize the partitions on eMMC and where to load kernel and rootfs? I don't see this board in supported ones.

Hello, i'm experiencing random reboots on my RockPi 4b. I firstly recognoized this when my Squid Proxy Server was not working anymore because it had no permissions to its var/log/squid directory. What i saw (lsblk) that /var/log/ is only of a size of 50mb. Will that be the cause for the reboots? Does the system crash when the logs are full? My System is a Rock Pi 4b with 32gb emmc storage. Debian Stretch with Armbian Linux 4.4.192-rockchip64 Armbian Release 5.90 (i dont know how to change to the next version as armbian-config does not provide the switch to next button) Output or Armbianmonitor -u http://ix.io/22oZ

Hi, I'm very pleased with my Helios 64, but since I updated to Armbian 20.11.6 (from 20.08.11 or 21, not really sure) it reboots at random times: it can run fine for over two weeks and reboot twice in 36 hours, always when idling. It's running OMV as well a multiple Docker containers: PiHole, Wireguard, Nginx, Transmission, restic-server and n8n. Is it a common issue? What fixes do you recommend? What should I look for to diagnose the issue? Thank you. Edit: forgot to mention that I'm using SnapRAID and mergerFS, as well as NFS shares.

As I reported here (https://github.com/armbian/build/issues/1230), I'm seeing frequent reboots and Kernel Panics on a RK3399 board while running ElasticSearch, a kinda heavy application that runs on Java. I currently run a Kubernetes cluster on two RK3399 boards (NanoPC-T4). One of them I has a version of DietPi with a Kernel 4.4.138 compiled by myself. and runs perfectly. The other had a newer version of a Kernel (4.4.154) also compiled by me and that's where I started seeing the reboots. After this, I installed Armbian thinking it might be something with my DietPi distro. I installed 5.69 with Kernel 4.4.167 and saw the same problems. I did a ful…

Hello all, I have this board running in a k3s kubernetes cluster, and almost everyday, different time, the board reboots. Please, could you help me to figure out which is the problem? The armbianmonitor output is bellow: http://ix.it/2OOZ Many Thanks,

Hello, I am new to Armbian and Linux and want to set up my raspberry pi camera module 2 for my rock pi4b so I can start doing computer vision work. Does anyone know how to do this?

I am trying to setup Raxda Display 8 HD with Radxa ROCK 3A. On official Radxa OS, I used Rsetup tool to setup overlay for `Radxa Display 8 HD' using official guide. How can I do same on Dedicated applications images with Armbian Linux v6.12 ( Home Assistant ) ? I have read Device Tree overlays guide on armbian docs but I can't find overlay for lcd display in files:

Hi, I was trying to load below Armbian images into NanoPi M4 (just M4, neither M4B nor M4V2). They are able to be loaded in the first place, but when I reboot the board by typing "reboot" command in the terminal, I can only see black screen showing on the monitor, no led flashing on the board even, and the board never boots up again. If I unplug the power cable and plug back again, it boots as expected. Is there any way I can reboot the board remotely? Armbian_20.08.1_Nanopim4_buster_current_5.8.6_desktop.img.xz Armbian_20.08.1_Nanopim4_buster_current_5.8.6.img.xz Armbian_20.08.1_Nanopim4_bionic_current_5.8.6.img.xz Armbi…

During installing Helios64 with the latest image I experienced several times that the system did not come up. Now that it is fully installed with OMV enabled, I sometimes do a reboot, and the system does not come up. Unfortunately I cannot see anything on the console level (on MacOS). After pressing the reboot button (around one or two times) the system comes up as nothing happened ever. What can I do to have the system reboot in a stable manner? Since it will sit in the basement soon, I don't want to run down every time I see that it does not reboot properly.

I don't know if it's of any use. Just noticed this issue of reboot not working on Buster legacy. Seems to be hdmi related. When I pull out hdmi for a few seconds then it does start booting. I remember this used to be the same on bionic mainline. Don't know why it's here now. I'm on NanoPi M4V2.

The first image that boots ok down the list of older images is Armbian_25.5.1_Nanopim4v2_bookworm_current_6.12.28_minimal.img.xz Could not get those images to boot: Armbian_25.5.1_Nanopim4v2_trixie_current_6.12.32_minimal.img.xz Armbian_25.5.1_Nanopim4v2_noble_current_6.12.28_minimal.img.xz Armbian_25.8.1_Nanopim4v2_bookworm_current_6.12.41_minimal.img.xz Anyway, I am happy using the one I found booting. Thanks

Has anyone here tested the Rock64 successfully with an u-boot version which is not the one from ayufan? I did not have much luck with the rk3328 default config and mainline u-boot when I tried it a while back. The same is true when I tried to use the board config from ayufan with mainline u-boot. The version by ayufan is working in principle but also is rather dated as far as I know and therefore does not support some newer features. Anyone knows if the version from ayufan will be bumped or has a working config for a more recent u-boot version?

Hi!, I am playing around with customizing my boot script (to install later my custom distro), and I am fighting with the Recovery. I took a long time to understand I have to press the recovery button during a "long time", then release it very quickly to get the UMS mode and not falling into the Maskrom mode. Indeed, when U-Boot detects the recovery button keypress, it proposes UMS, then very shortly after the Maskrom mode. Is it possible to configure U-Boot to wait longer on the UMS mode, let's say 5 seconds, and after that delay switch to Maskrom mode as latest failover? For info: I have Armbian running on EMMC, and I…

Hello, I am implementing booting animation to my source using plymouth without systemd when i run plymouthd it is showing logs like plymouthd --debug 00:00:22.972 ../../plymouth-0.9.5/src/main.c:1945:initialize_environment : initializing minimal work environment 00:00:22.972 ../../plymouth-0.9.5/src/main.c:1957:initialize_environment : checking if '/dev/tty1' exists 00:00:22.973 ../../plymouth-0.9.5/src/main.c:1823:check_verbosity : checking if tracing should be enabled 00:00:22.974 ../../../plymouth-0.9.5/src/libply/ply-utils.c:910:ply_get_ker: opening /proc/cmdline 00:00:22.975 ../../../plymouth-0.9.5/src/libply/ply-utils.…

I have been using a Rock Pi 4C Plus (v1.2) with M.2 slot with Armbian for some time. I boot from eMMC, but have a 500GB NVME device Cannot recall the original version of firmware installed, but it was originally a Debian bullseye image and I re-installed when a bookworm image became available. I regularly use "apt update" followed by "apt upgrade" to keep the software up to date. After a recent update the system went into a boot loop. I attempted to recover by creating an SD card with the latest Armbian image. When trying to debug the issue I noticed that the NVME in the M.2 slot is no longer recognized. Reverting to previously available 23.11 image and the NVME …

I did a lot of power consumption tests with my NanoPi R6C and noticed something strange when switching from kernel 5.10.110 to kernel 5.10.160. Hardware NanoPi R6C 4GB 32GB Sandisk High Endurance microSD Card Ugreen 18W USB Power Supply Software Armbian 23.5.1 Nanopi-r6s bookworm Default settings (only changing fdtfile=rockchip/rk3588s-nanopi-r6s.dtb to fdtfile=rockchip/rk3588s-nanopi-r6c.dtb in /boot/armbianEnv.txt) Switching between legacy 5.10.160 and legacy 5.10.110 kernels with armbian-config With just 1Gbit Ethernet and the power supply connected in idle (measured at wall): kernel 5.10.110…

I think I found a regression: It seems the USB 3.0 port is not working with kernel 5.10.160. It was working with kernel 5.10.110. So I have two questions: 1. How do I file a bug-report ? 2. Linux 6.3 officially supports the rockchip-rk3588 (6.4 is out). When can we expect a kernel update and which kernel version would that be? Thank you

I'm trying to setup disk encryption, but for some reason its not opening devices after installing cryptsetup-bin on the installation image. After typing the password it just hangs and does nothing $ cryptsetup open /dev/sda sda_crypt Anyone?

I've been playing around with the 3d hardware acceleration on jammy, so I can use KODI without stuttering. And that works fine although the KODI version is a bit outdated. So I installed it doing this, under root: add-apt-repository ppa:liujianfeng1994/panfork-mesa add-apt-repository ppa:liujianfeng1994/rockchip-multimedia apt update apt dist-upgrade apt install mali-g610-firmware rockchip-multimedia-config but how do I revert: apt purge --yes mali-g610-firmware rockchip-multimedia-config apt autoremove --yes apt dist-upgrade --yes add-apt-repository --yes --remove ppa:liujianfeng1994/panfork-mesa add-apt-repository --yes --r…

Working on the rockchip64 family dev images, since 4.19 is an LTS and the RK3328 support is somewhat workable. With a reminder of something I failed to read by @JMCC, I got this today: ____ _ | _ \ ___ _ __ ___ __ _ __ _ __| | ___ | |_) / _ \ '_ \ / _ \/ _` |/ _` |/ _` |/ _ \ | _ < __/ | | | __/ (_| | (_| | (_| | __/ |_| \_\___|_| |_|\___|\__, |\__,_|\__,_|\___| |___/ Welcome to ARMBIAN 5.65 user-built Debian GNU/Linux 9 (stretch) 4.19.0-rockchip6 …

I downloaded the image of nanopi R6s from the official website[https://www.armbian.com/nanopi-r6s/](https://www.armbian.com/nanopi-r6s/), but it failed to start no matter burning to sd card or emmc. I know a lot of people have this problem, like this page [https://forum.armbian.com/topic/27904-armbian-images-for-r6s-r6c/?do=findComment&comment=164029](https://forum.armbian.com/topic/27904-armbian-images-for-r6s-r6c/?do=findComment&comment=164029) This is the log printed by the serial port: ``` DDR V1.12 52218f4949 cym 23/07/06-19:46:50 LPDDR4X, 2112MHz channel[0] BW=16 Col=10 Bk=8 CS0 Row=16 CS1 Row=16 CS=2 Die BW=16 Size=2048MB channel[1] BW=16 Col=10 Bk…

Hello, https://doc.embedfire.com/products/link/en/latest/linux/ebf_lubancat.html I tried to port the kernel device tree in the SDK provided to the mainline kernel, but it ultimately failed to start I'm not sure what the difference is between the device tree in the mainline kernel and the rk custom kernel Please help me.

Hello Armbian Team, I am experiencing some difficulties with my Orange Pi 5 Ultra. Currently, there is no Armbian distribution available for this board. Although official Debian/Ubuntu images are provided on the Orange Pi website, none of them include the latest NPU driver (RKNPU 0.9.8). Since Orange Pi 5 Ultra has hardware similarities with Orange Pi 5 Max, I was wondering if it would be possible to release an Armbian version for this board as well. An official Armbian release would be highly beneficial for developers and users who require a stable and optimized OS for this hardware. Would it be possible to consider adding support for Oran…

Hi there, I wanted to share with everyone here the final product - a gaming handheld we've designed from scratch in Solidworks. I've been working on this with a fellow Armbian contributor @GinKage for quite some time (probably over a year now... time really does fly) who has helped me learn a lot on the software side, which I wasn't really familiar with before I reached out to him. Despite it's shortcomings, I'm really happy with the v1 build. I hope you guys like it! Open source files can be found here, including CAD files, Armbian build files and more. https://github.com/StonedEdge/Retro-Lite-CM5 Retro Lite CM5: Radxa CM5 Gaming Handh…

Having a problem with my board and screen. Recently purchased a couple of inexpensive touch screens that work dandy for pi and lepotato but the resolution on renegade is too high and text just looks like dust on a 7 inch monitor. I took a look at potato xorg driver.conf and there's a lot of modes listed, but on renegade I see: Section "Device" Identifier "NOGPU" Driver "fdev" Endsection And xrandr -- listmonitors output: Failed to get size of gamma for output default Monitors 1 0: +default 1600/423x900/238+0+0. I'm still learning things, but I know exactly how to brick it again 😃. I hope I…

Hello. I have this old rk3188 based board with 32gb rom 1gb ram. The arduino is attached for console output. I wanted to install linux in it so i flashed rk3188 armbian to my sd card and it was able to boot up from sdcard successfully. But there is no hdmi signal. I tried to modify dtb file extlinux.conf file but it didnt work. Can anyone figure out what is the problem? This is my extlinux.conf: LABEL Armbian LINUX /boot/zImage INITRD /boot/uInitrd FDT /boot/dtb/rk3188-rbox-cs968.dtb APPEND root=UUID=61de6b0d-dcd6-4049-9fe8-3a15872992b5 console=uart8250,mmio32,0x20064000 console=tty0 …

Per the title, I was able to extract an ftb file and convert it to dtb and dts file. I would like to use the community build framework and build Armbian for SV06 Ace. The initial plan was to base the new board/*csc files on other rk3308b boards; sakurapi and rock-s0 and then pull configuration values from the OEM dts file. I'm confused about the dts structure in Community builds and the proper locations for defconfig, dts and dtsi files. I've worked with the files in OpenWRT where they are rigidly structured - something that would be a monumental task for Armbian community builds. The OEM dts file does not use any includes/dtsi fi…

Hi, I'm new to the forums and am looking into replacing OEM Klipper firmware on a Sovol SV06 Ace, The main board looks very similar to the MKS Skipr with the following notable differences: rk3308 B emmc soldered on No SD card. Wifi/Bluetooth added - Original boards used realtek and the latest version uses Broadcom. OEM wifi is hit or miss on connecting and hopefull will be improved with Trixie based Armbian. Sovol has mostly complied with the GPL and source/configuration files are on github. IIRC the kernel version was 5.1x I'm a long time Linux user (Slackware 8.1), have contributed OpenWRT builds and hav…

I deal with a problem I cant solve with installing my usb printer Samsung ML-2160. CUPS recognise it but it doesn't have the exact driver (it recomends ML-2152WPS I think, but it doesn't work as I cant print anything after the the installation) I tried from HP download directly a ULD but when I try to run the install.sh it gives a message about ARM architecture expected (although there is a directory for ARM architecture under the install.sh file) Any ideas?

Hi team, This is not exactly Armbian related, however I hope to find some help here, also it can be useful for someone else in custom board development (my case). For testing I have Olimex RK3328-SOM-EVB and RK3318 TV box boards. They both behave the same way. As summary I'm trying to boot Linux using the Bootrom and USB OTG only, in other words without any external boot NVM attached. To archive this I build U-Boot SPL (u-boot-spl.bin), which support SDP protocol via USB OTG. For SDP file transfer I'm using imx_usb tool. The binaries used in the process are: rk3328_uboot_v1.19.250.bin - consists of u-boot-tpl.bi…

THE MEDIA SCRIPT IS NOW DEPRECATED, IN FAVOR OF THE OFFICIAL MULTIMEDIA FRAMEWORK. PLEASE REFER TO THIS TOPIC: And, for last, the first version of: The UN-official, UN-supported, UN-expected RK3328 MEDIA TESTING SCRIPT This is the first release of the RK3328 media testing script. The script provides a functionality similar to its RK3288/3399 equivalents, except for the OpenCL related stuff, which is not supported by the SoC. So it includes: Installing all the libraries and system configurations necessary for GPU accelerated X desktop, Chromium WebGL, full VPU video play acceleration up to 4k@60 10-bit HEVC (the maximum su…

Hi Folks, I'm testing the M4 board with Armbian Buster, I'm having the following problems with the GPIO: How can I use gpio without root? I've checked and there isn't a /dev/gpiomem device so I can give permissions to other users. Only a few of the GPIO pins can be set. Most of them don't show up as configurable through gpio readall. A few of them show as ALT and although I can change their mode (input / output), I cannot change/read their value, it seems those are shared with i2c-3, so this can be the problem, but I don't know how to disable i2c-3 and use them. Also, can all the 6 cores work at the same time? Or the BIG.little architecture…

I use orangepi 4B. I use console Ubuntu with kernel 4 from Xunlong And my CPU Temperature (by htop) is about 70°C I use console armbian with kernel 5 (Governor = powersave). And my CPU Temperature is about 79°C Why so? I want to get 70°C in armbian too.

After recent kernel update, USB3.0 ports no longer work, There is an error printed in kernel log. [ 2.826383] phy phy-ff800000.phy.6: phy poweron failed --> -110 [ 2.827119] dwc3 fe900000.usb: error -ETIMEDOUT: failed to initialize core [ 2.827881] dwc3: probe of fe900000.usb failed with error -110 I found this issue in NanoPC T4, but it might also appear in other RK3399 boards. lsusb didn't show any USB3.0 controller. Confirmed this isn't my hardware's problem, another board have this issue too. dwc3.txt

I am amazed My NanoPi M4 2gb plays Assaultcube and Torcs so well for a $85 computer it is a great achievement. But I have some questions. If I have more than 2 Bots/ enemies in Assaultcube 1024 X 768 graphics setting good, it seems to slow down game play, Is this because the bots are limited to a single CPU thread? and would therefore work better on larger Intel single or dual chips? Is any one else playing Assaultcube what settings are you finding optimize the RK3399? Seasalt.

Hello, I have an Orange Pi RK3399 and I'm very interested to install an armbian linux using the usb c instead of the usual method with the sd card. I have looked around but I was able to do it. Do you have any suggestions? Thank you very much for your help

IT'S FINALLY HERE... THE OFFICIAL ROCKCHIP-LEGACY MULTIMEDIA INTEGRATION After two years of using a separate script to enable the multimedia features in RK3399 Legacy Kernel, the whole framework has been incorporated to the official Armbian packaging system. The choice distro for this integration is Debian Buster (see FAQ at the end of this post about the reasons). I. Installation Download a Armbian Buster Legacy Desktop image for your board, and install it with the standard Armbian method. Install the complete multimedia solution with sudo apt update && sudo apt upgrade sudo apt install media-buster-legacy-rk33…

I'm trying to build a linux from source on a RK3399 nanopi-m4. I did the below steps: ### Download and compile ARM-TF ### $ git clone https://github.com/ARM-software/arm-trusted-firmware.git $ make CROSS_COMPILE=aarch64-linux-gnu- PLAT=rk3399 bl31 ### Download and complie U-Boot ### $ cd .. $ git clone https://gitlab.denx.de/u-boot/u-boot.git $ cd u-boot/ $ git checkout v2019.10 $ make CROSS_COMPILE=arm-linux-gnueabi- nanopi-m4-rk3399_defconfig $ cp ../arm-trusted-firmware/build/rk3399/release/bl31/bl31.elf . $ make ARCH=arm CROSS_COMPILE=aarch64-linux-gnu- $ make ARCH=arm CROSS_COMPILE=aarch64-linux-gnu- u-boot.itb $ ./to…

First Rockchip RK3399 based board from Orangepi maker - under development, not much news except what can be scrapped from pictures. Chip: http://rockchip.wikidot.com/rk3399

I have a suggestion for the moderators: Please move the Rockchip 3399 subforum from development to Bug Tracker if its ok! Most of the boards listed there: Nanopi Neo4, M4, NanoPC T4, Rock64PRO, Rock Pi4 are now marked as supported on the Armbian download page. I read a comment from @Igor sometime ago (not able to locate right now) that the only thing holding back the sub forum transfer was a lack of moderator action. Thanks.

Hi all, currently i'm working on upcoming Helios64 board. For RK3399 board there are 2 families, what are the differences between them? I've been following discussion on github and this forum for few months but still unsure which family i should use.

After bootup I get # systemd-analyze Bootup is not yet finished. Please try again later. # systemctl list-jobs JOB UNIT TYPE STATE 142 systemd-update-utmp-runlevel.service start waiting 114 rk3399-bluetooth.service start running 1 multi-user.target start waiting If I stop rk3399-bluetooth.service everything completes and list-jobs is clean, but then bluetooth stops working. I've tried a few things in the rk3399-bluetooth unit file but so far I've not been able to find a way to make systemd happy and finish cleanly. By the way, in the service file i…

I'm curious to experiment with LLMs on an RK3566 TV Box. I managed to build a working Debian disto for it, but wasn't able to locate any NPU support in the kernel configuration. Anyone know how to build such a kernel for the RK3566, with support for the inbuilt NPU, or preferably, how to add build a NPU kernel module that can be linked-in? Any hints, suggestion or links greatly appreciated. GBEM 👽

Hello, I am trying to enable Panfrost GPU acceleration on a new Armsom Sige5 board running the latest edge kernel (6.1.115), but glxinfo -B still shows llvmpipe. I have been troubleshooting this for some time and have discovered that the kernel module (panfrost.ko) loads correctly with modprobe, but it is not binding to the GPU hardware on boot. I believe I have found the reason why. A recent commit to the Armbian build system (https://github.com/armbian/build/commit/836def3d11699537e6289dedfbc766c2050d422d) changes the method for enabling Panfrost. It removes the panfrost overlay and adds KERNEL_TARGET_CONFIG="panfrost-all" instead. It…

RK3576 nanopi M5 cannot start Waydrod I am trying to use Waydrod on the nanopi M5, and I am starting it up CONFIG_ANDROID_BINDER_IPC=y CONFIG_ANDROID_BINDERFS=y CONFIG_ANDROID_BINDER_DEVICES="binder,hwbinder,vndbinder" However, during the actual startup of Waydrod, there was a continuous black screen crash and restart. The following is the error log: nano@nanopi-m5:$ waydroid show-full-ui [13:55:56] Introspect error on :1.103:/ContainerManager: dbus.exceptions.DBusException: org.freedesktop.DBus.Error.NoReply: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, th…

Hi there!!! LTNS. Not pretending to ask for a solution. Just curious, what am I doing wrong, after a decade with Armbian. ;) A new Chinese board with RK3567, quite similar to kickPi. Boots up to "INFO: BL31: Initializing BL32" then hangs. Changing DTB in armbianEnv.txt does nothing, same is for verbosity. I guess there's some pre-DTB in uboot, as I recall, this is common with RK chips. And it seems to not match my hardware. Any reasonable way to fix, before i rebuild the whole image? Thanks in advance!