Other families

Hi, I lose hdmi output if I unplug the hdmi cable and plug it again .. I can still access the odroid via ssh.. Any help is greatly appreciated !

• 0

  Reputation Points

• 2 replies
• 4.5k views
• 1 follower

krpt

October 5, 20179 yr

I'm new here, so please bear with me! I run an Odroid XU4 with Armbian stretch default. Recently I did a normal apt update and upgrade to kernel/dtb/headers version 5.97 (from 5.91), along with all other possible upgrades. This made the system very unstable- it had an uptime of nearly 3 months with 5.91 (all time high for the board) before the reboot, and after the upgrade it lasted a couple of hours before stalling/crashing. A downgrade to kernel/dtb/headers v 5.95 helped somewhat, but it crashed after a week or so - it may just be of those "it just happens". I went ahead and installed 5.91 and it is stable so far a few days in. The board is a bit…

• 1

  Reputation Points

• 8 replies
• 6.1k views
• 2 followers

uli

October 2, 20197 yr

Hi Igor, Hi Armbian team, I wanted to give a short teaser of an upcoming board I have been developing. The board will be launched through a crowd-funding campaign in couple of weeks. Codename : Helios-4 I'm sure the heatsink will give you some hint The board has been build around the Marvell Armada 388 SoC / SoM from SolidRun. So part of the design is inspired from the Clearfog dev board. Actually the SolidRun helped me on the PCB layout to make this little guy reality. Here the main specs : - dual core A9 @1.6 GHz (max 2Ghz) - 1GB DDR3 (2GB optional) - 4x SATA III - 2x USB 3.0 - 1x Gigabit …

• 1

  Reputation Points

• 55 replies
• 40.4k views
• 8 followers

malvcr

October 1, 20188 yr

I have a Helios4 (2nd batch) with 4 HDDs, and before I started using it, I decided to test its performance on the planned workload. However, I got quite not satisfied with the numbers. First, the SSH speed is about 30 MB/s, while the CPU core where sshd runs is at 100% (so I suppose it's the bottleneck). I create a sparse file and copy it over SSH: helios4# dd if=/dev/null bs=1M seek=2000 of=/tmp/blank With scp I get up to 31.2 MB/s: pc# scp root@helios4:/tmp/blank /tmp With rsync I get pretty much the same numbers: pc# rm /tmp/blank pc# rsync -e ssh --progress root@helios4:/tmp/blank /tmp/ blank 2,097,152,000 100% 31.06MB/s 0:01:04 (xfr…

• 1

  Reputation Points

• 12 replies
• 7.2k views
• 2 followers

Heisath

February 16, 20215 yr

I did a apt upgrade that messed up my set up, so I have recently (as in two hours ago) reinstalled armbian on on my dragon q6a. Unlike the previous set up, I have not been able to connect to my wifi. Did a bit of a dance with AI help and still failed, but it looks like the wifi module is directly not found. nmcli device returns ``` DEVICE TYPE STATE CONNECTION enp1s0 ethernet unmanaged -- lo loopback unmanaged -- ``` lsusb returns Bus 001 Device 005: ID a69c:8d80 aicsemi AIC Wlan So I guess that's the wifi hardware and AI claims my system does not have the drivers.…

• 0

  Reputation Points

• 8 replies
• 3.2k views

iosef

September 22Sep 22

hello, during ansible-fact-gathering following errors are logged. no instability has been noticed. uname -a Linux nas 4.9.46-odroidxu4 #10 SMP PREEMPT Fri Sep 1 05:29:13 PDT 2017 armv7l GNU/Linux Sep 06 15:02:36 nas ansible-setup[28480]: Invoked with filter=* gather_subset=['all'] fact_path=/etc/ansible/facts.d gather_timeout=10 Sep 06 15:02:37 nas kernel: Unhandled fault: asynchronous external abort (0x1211) at 0x00000000 Sep 06 15:02:37 nas kernel: pgd = e69ccc80 Sep 06 15:02:37 nas kernel: [00000000] *pgd=42c04003, *pmd=00000000 Sep 06 15:02:37 nas kernel: Unhandled fault: asynchronous external abort (0x1211) at 0x00000000 Sep 06 15:02:37 nas kernel: pg…

• 0

  Reputation Points

• 2 replies
• 3.7k views
• 1 follower

chymian

September 29, 20179 yr

Hi, I'm new proud user of Helios4 Batch3. I started to "play" with different options on this board - and after a 24 hours of use - board doesnt start anymore. Status led blinks but and disk leds blink for short time. It is not possible to connect via terminal console or network. I'think that problem (at least logs point that way) with missing or unavail mount point or (one) disk problem. But nevertheless I think that system itself should still be accessible. Am I wrong? Some disks can fail but not all mount points reside on them. If I disconnect all disks (physically) then connection(s) is/are possible again. I'm st…

• 0

  Reputation Points

• 4 replies
• 4.1k views
• 2 followers

aprayoga

September 9, 20197 yr

Hi guys, this is something that I would like to achieve if feasible. I remember that other OS like "RetroPie Arena" support GPU acceleration, thanks. Any documentation to read? Thanks! 🙏

• 0

  Reputation Points

• 9 replies
• 4.4k views
• 1 follower

igagis

April 21, 20251 yr

Hi! my odroid HC2 is running pretty great on armbian 5.90 for >1,5 years (24/7) now. Running a nextcloud instance, with decent perfomance, even when clocked to 600/1200 Mhz in the summer, because of one (1) crash, that I think might have been heat-related. The thing I'm wondering about: in htop, it shows only ( .LITTLE) cores for eight lines, but the cpu is a (.big.LITTLE) architecture and my other HC2 sbc, which runs armbian 20.02.7, show "(.big.LITTLE)" in htop. Perfomance in sysbench is equal on both boards, so this might mean nothing, but it still seemed strange to me. Anyone knows why htop only shows "( .LITTLE)" cores?

• 0

  Reputation Points

• 1 reply
• 3.4k views

piter75

October 17, 20205 yr

Hello, I wanna test Armbian x86 on virtual machine. Is possible to convert its img file to some format (vdi or vmdk) and boot on Virtualbox? I made a attempt but it wont boot.. VBoxManage.exe convertfromraw --format VDI armbian.img ambian.vdi Thx a lot

• 1

  Reputation Points

• 7 replies
• 8.3k views
• 2 followers

BOFFBOY

February 12, 20242 yr

Upon reading the content of RPi5 about 6.12 from this and this , I was under the impression that it's okay to upgrade the Armbian 24.11 based NextCloudPi to a 6.12 kernel. Well, I was wrong and the RPi5 current stuck in the RPi Logo on a black page. Net address seems to be 0.0.0.0. I could really use some advice on how to restore this, perhaps some `chroot` method from another Linux machine to get the right kernel package and intramfs. Here are the steps that got me to the current situation. Maybe a hint on how to restore? 1. Mark `raspi-firmware`, like what was recommended in 1st post. sudo apt-mark hold raspi-firmware [sudo] passwo…

• 0

  Reputation Points

• 3 replies
• 6.4k views

The Tall Man

September 27, 20251 yr

Hi! short question: Best way to create a bootable clone of sd card? I did some reading and found ">>create image on windows >> shrink image via gparted" doesn't work for me since I dont have a second computer running linux (will the linux subsystem on windows 10 help?). In the past, I used the rpi-clone on a raspberry, but reading in this forum has taught me that hotcloning an armbian sd card via script is not necessarily safe. Computers availabel to me are: 1) odroid hc2 running armbian 2) acer laptop running windows 10

• 1

  Reputation Points

• 3 replies
• 11.5k views
• 1 follower

kerosin

March 5, 20215 yr

On a fresh armbian bullseye debian install on an odroidhc2, the only change is I installed NCP through armbian softy and a reboot. My sudo account works, but if I try to sign into root it says account unavailable. How can I fix this?

• 0

  Reputation Points

• 0 replies
• 1.9k views
• 1 follower

slatko

October 23, 20232 yr

Hi Guys, I tested both the odroid official and armbian images for the XU4. Both run well, but I prefer the armbian image. I have attached my 800x480 hdmi display, it works, but there's a purple line at the left side of the display. ( I think it's one pixel wide) This is not the case with the odroid official image, so I guess it's a configuration issue. I took a look at the boot. ini file, but I don't see anything that rings a bell. Can somebody point me to the right direction?

• 0

  Reputation Points

• 3 replies
• 2.7k views

mrroland

June 7, 20188 yr

Hello, I am experiencing a critical issue with my Helios4 board from Kovol after a recent power outage. When I power on the device, the fans start spinning, but none of the LEDs illuminate at all. This includes the power LED and any activity LEDs. Anybody can help me?. I thought it might be the power supply, but I can't find where I could buy it. Does anyone know where to find it? Thank you very much.

• 1

  Reputation Points

• 4 replies
• 2.5k views

Nova

May 2, 20251 yr

Hi All! I was wondering if there is a proper way to deploy a freshly built armbian for Odroid XU4 on an eMMC? Unfortunately, the SD-Card version doesn't seem to work with the eMMC. After searching for this topic I couldn't find anythin in particular related to Odroid. Thanks, Viktor

• 0

  Reputation Points

• 5 replies
• 7.9k views
• 1 follower

N4IRS

October 2, 20179 yr

Hi, I'm considering reinstalling OpenMediaVault using an Armbian image as the NAS performance on the current image I use is very bad (4-7 megabyte via Samba over Gigabit) and I've heard that it should be much better with Armbian. Since I have some data on my NAS that's protected with Ecryptfs, I wonder if the kernel config in a future update could be changed to include Ecrypt_fs module support. Thanks for considering making this change. All the best, Sebastian EDIT: tkaiser from the openmediavault forum took care of this. Thanks!

• 0

  Reputation Points

• 0 replies
• 2.6k views

rainforest1155

November 9, 20178 yr

Ok, so after PHP issues I started off with a fresh armbian install and via armbian-config I installed OMV 4. Install finished without any problems but if I copy stuff via smb the tranfer speed is really bad and I don't know why. On an old install with OMV 3 I used to get nice 100 mb/s. The cpu temp also used to be at like 80 °C during copy, now it looks like this: Following extra options are set in smb.conf: min receivefile size = 16384 write cache size = 524288 getwd cache = yes socket options = TCP_NODELAY IPTOS_LOWDELAY I also checked smbd app, it's running on a big core.... I get the feeling that not all the avaiable resources of my HC2 ar…

• 0

  Reputation Points

• 4 replies
• 7.7k views

trohn_javolta

January 7, 20197 yr

I learned that the cpu on my hc2 has 4 'slow' cores and 4 fast ones. Now I would want certain apps to always use the fast cores. I found `taskset` to do so. My idea was to just add `taskset --cpu-list 4,5,6,7` in the .service file of the desired app in the execstart line in front. To have it always use the big cores. Would this work? Also I have apps 'calling' unrar to extract files. I don't know how I would do it in this case. I think it'll be a bit complicated to tell the apps to call unrar with `taskset --cpu-list 4,5,6,7`. Is there a way to have unrar always run on the big cores?

• 0

  Reputation Points

• 6 replies
• 5.1k views

trohn_javolta

March 3, 20188 yr

I tried to install armbian to my internal sata drive (SSD: Samsung Evo 850). But the device fails to boot after the root fs is moved. I used the command nand-sata-install with following option: Boot from SD - system on SATA or USB I tried different filesystem formats (ext4, btrfs) and armbian builds: Armbian_5.37_Odroidxu4_Debian_jessie_next_4.9.71 (stable) Armbian_5.37_Odroidxu4_Ubuntu_xenial_next_4.9.71 (stable) Armbian_5.41_Odroidxu4_Debian_stretch_next_4.9.83 (self-built) I dont have a terminal adapter to access the boot logs. Any hints how to get additional information or to fix this issue?

• 0

  Reputation Points

• 13 replies
• 11.8k views
• 3 followers

Walker

June 9, 20188 yr

Anyone know why it's not supported out of the box? The wiki provides a patch but does not mention why it's not upstream or in Armbian. The bus-width being 4 is also quite suspect. All the other Armada 38x devices have it at 8. Armada 37x ones have it at 4.

• 0

  Reputation Points

• 5 replies
• 4.5k views
• 1 follower

m4110c

September 9, 20215 yr

Hi Installed Armbian_25.2.3_Rpi4b_bookworm_current_6.12.17-homeassistant_minimal.img To work around broken packages dependency run: apt update dpkg --remove --force-all libraspberrypi0 armbian-bsp-cli-rpi4b-current apt --fix-broken install At the end I got this: update-initramfs: Generating /boot/initrd.img-6.12.17-current-bcm2711 W: Possible missing firmware /lib/firmware/rtl_nic/rtl8156b-2.fw for built-in driver r8152 W: Possible missing firmware /lib/firmware/rtl_nic/rtl8156a-2.fw for built-in driver r8152 W: Possible missing firmware /lib/firmware/rtl_nic/rtl8153c-1.fw for built-in driver r8152 W: Possible missing firmware /lib/firmware/…

• 1

  Reputation Points

• 8 replies
• 7.5k views

Werner

September 1, 20251 yr

Hi everyone! Can anyone tell me how to make the system boot without displaying any text characters? I'd like to just see the Radxa logo, then a black screen and the login screen (GDM). What settings do I need to configure to achieve this? I have the Armbian 2.6.4 Trixie CLI image installed with GNOME.

• 0

  Reputation Points

• 0 replies
• 965 views

Hackerman

April 28Apr 28

I got my HC2 yesterday and am quite satisfied with it. I'm using the latest Armbian Stretch release. The spin-down of my 3TB WD Red was solved by a firmware update. Unfortunately there are still some errors in the error output (journalctl -p 3). Maybe you have a hint how I can solve it: Nov 03 18:16:42 NAS kernel: CPU4: Spectre v2: incorrect context switching function, system vulnerable Nov 03 18:16:42 NAS kernel: CPU5: Spectre v2: incorrect context switching function, system vulnerable Nov 03 18:16:42 NAS kernel: CPU6: Spectre v2: incorrect context switching function, system vulnerable Nov 03 18:16:42 NAS kernel: CPU7: Spectre v2: incorrect context swit…

• 0

  Reputation Points

• 1 reply
• 2.8k views
• 2 followers

joe62

November 30, 20187 yr

armbian-bsp-cli-odroidxu4-current is held back because base-files_25.2.2-13ubuntu10-noble_armhf does not exist (again). As before, the fix seems to be wget https://apt.armbian.org/apt/pool/noble-utils/b/base-files/base-files_25.2.2-13ubuntu10-noble_amd64__1-noble-1armbian1-Baa17-U13ubuntu10-R55fa.deb wget https://apt.armbian.org/apt/pool/noble-utils/b/base-files/base-files_25.2.2-13ubuntu10-noble_armhf__1-noble-1armbian1-Baa17-U13ubuntu10-R55fa.deb dpkg-deb -x base-files_25.2.1-13ubuntu10-noble_armhf__1-noble-1armbian1-Baa17-U13ubuntu10-R55fa.deb armhf dpkg-deb -x base-files_25.2.2-13ubuntu10-noble_amd64__1-noble-1armbian1-Baa17-U13ubuntu10-R55fa.de…

• 0

  Reputation Points

• 0 replies
• 2.1k views

prof

March 1, 20251 yr

Hey I have recently installed Armbian specifically the Intel/AMD image for my Dell 3100 2-in-1 chromebook. It runs fanominally but the headphone jack doesn't detect my headphones correctly but yet my bluetooth ones work without a problem. Anyone have a idea of whats going wrong?

• 0

  Reputation Points

• 5 replies
• 3.8k views

Trickiidum

March 22Mar 22

After I closed the lid of my chromebook Armbian decided to die even across reboots. https://drive.google.com/file/d/1gkEzVoY5QkNcWq3MOKYUSc8nkFYg91p-/view?usp=sharing Video of what I see https://drive.google.com/file/d/17yhnIjzkiYkkVohFrLf7MKDtYyb0xfOL/view?usp=sharing

• 0

  Reputation Points

• 0 replies
• 955 views
• 1 follower

Trickiidum

April 1Apr 1

I installed a Debian Jessie on an Odroid HC1, and trying to connect an encrypted disk to it via USB. blkid lists the device: # blkid /dev/sdb1: UUID="2288876d-0fe8-4b5a-b7d1-1660df8b2e25" TYPE="crypto_LUKS" PARTUUID="c8895b7f-01" but when I try to open it with luksOpen: # cryptsetup luksOpen /dev/sdb1 sdb1_crypted Enter passphrase for /dev/sda1: After entering the passphrase (and Enter), it hangs. The SSH connection times out after 1-2 minutes (where to enlarge?) and there is no HDMI on the HC1, so I am left blind. The disk was created and used in another system and worked perfectly on a Raspberry PI and my Linux PC. I created a key file and added…

• 0

  Reputation Points

• 5 replies
• 3.7k views
• 1 follower

zsolt

March 4, 20188 yr

Hi! I've been using Armbian on my Odroid XU4 for some months now. It runs LogitechMediaServer, Home-assistant, Openmediavault,... It's great. However, today, I've just ran apt-get upgrade, reboot because of an update of the kernel and then... no reboot! The blue LED of the Odroid is lit (it doesn't blink), there is nothing on the HDMI output, nothing on the network,... It seems like the odroid cannot load the kernel. Is there anything I could do to try to make it boot again ? Yeah, I know, I should have done a backup of the SD card before the update ... Thanks for your help!

• 1

  Reputation Points

• 13 replies
• 7.6k views
• 3 followers

BigG2017

April 17, 20179 yr

Hello. I freshly installed bullseye from the other supported variant links for an odroid XU4. When trying to get docker daemon running, it looked like the ip_tables module and br_netfilter modules weren't available in the kernel. I think I have sorted out ip_tables (modprobe doesn't return any problems now), but docker's daemon is still showing a problem when running dockerd (with debug level info in the daemon.json file): Running modprobe bridge br_netfilter failed with message: modprobe: WARNING: Module bridge not found in directory /lib/modules/5.19.10-armmp-lpae When executing systemctl status docker.service ... …

• 0

  Reputation Points

• 2 replies
• 3.9k views

Igor

November 25, 20223 yr

hi, i try to install the current IOT/minmal image on the intern ssd on a old thinclient. USB-Drive will ident as sda and the ssd as sdb. if i use on armbian-config the install script for install, he create two partitions (sdb1 &2 / efi & linux) but it only boot with usb drive. On the usb drive i has a BIOS boot partition, must i swaphis somehow to the ssd drive?

• 0

  Reputation Points

• 3 replies
• 4.1k views

Werner

September 24, 20251 yr

Hi, I want to try out my Odroid HC2 as an openvpn client. I don't expect great performance but I want to make sure I set it up correctly. This is why I want to ask if anyone can give any recommendations or tweaks for using it as an openvpn client. Idk much about openvpn, I know it uses openssl for de and encryption. Is there a way to use hardware de and encryption so I can speed things up and have a better download speed via openvpn? Or is hw de/encryption maybe already used by default if I just install openvpn package? Any recommendations on how to correctly set this up are appreciated.

• 1

  Reputation Points

• 3 replies
• 4k views
• 2 followers

jshc1

August 20, 20197 yr

Straightforward! See signature. Thanks to the team.

• 0

  Reputation Points

• 0 replies
• 2.2k views

FredK

December 3, 20223 yr

Hi, New user here - I Just download the current version of Armbian today with the hopes of using it on my Raspberry Pi 5B. After unzipping it, I created an image on a usb stick using Raspberry Pi Imager - use custom. However, it is not booting. It only shows a few lines on the screen, the last being: Begin: Running /scripts/local-block ... done. (screen shot below) What am I doing wrong?

• 0

  Reputation Points

• 11 replies
• 8.8k views

Rob Latour

July 16, 20242 yr

Hello, playing around with the HC1 I noticed the lack of the nbd driver within this image. Because of the good documentation and the excellent build chain system I was able quickly to build a installation image solving my needs. My question: are there plans to add the settings necessary for nbd driver generation to the image build configuration ? Otherwise I would have to take care in case of armbian kernel updates. Thanks in advance, Joe62

• 0

  Reputation Points

• 0 replies
• 2.4k views
• 1 follower

joe62

November 30, 20187 yr

Hello! I have connected the WD 10TB RED HDD via external USB 3.0 enclosure to one of the USB 3.0 Ports on the HELIOS4. Unfortunately the speeds don't exceed 45 MB/s. when running RSYNC jobs. On the PC I can completely use the speed of the GBit Port.. When connected to the USB Ports of HELIOS4 the speeds are low. Can somebody help? The external enclosure is from UGREEN. HDD is NTFS formatted. Any advice will be gratefully appreciated.

• 0

  Reputation Points

• 0 replies
• 2.6k views

Vodalex

December 5, 20214 yr

I recently hooked up my XU4 to a DVD/CD Enclosure, essentially just SATA to USB, and am having an issue mounting the drive. After researching online it seems this is a filesystem issue. So, I was wondering if anybody else has encountered this problem, and if so, how did you fix it? Thanks Armbian: Image: Armbian_5.37_Odroidxu4_Ubuntu_xenial_next_4.9.71_desktop.7z Kernel: [default] 4.9.61-odroidxu4 #2 SMP PREEMPT Wed Nov 22 16:34:23 CET 2017 Errors: # mount -t iso9660 /dev/sr0 /media/ceru/cdrom mount: /dev/sr0 is write-protected, mounting read-only mount: wrong fs type, bad option, bad superblock on /dev/sr0, missing co…

• 1

  Reputation Points

• 3 replies
• 3.7k views
• 2 followers

Technicavolous

March 10, 20188 yr

Estoy perdido, despues de buscar y buscar soluciones, soy nuevo en este foro. He probado xu4fan, fancontrol, incluso un script que está en este foro, y no puedo iniciar el ventilador con armbian, ni siquiera puedo hacer que el ventilador se mueva. he intentado esto PUNTO_VIAJE_0=25000 PUNTO_VIAJE_1=30000 PUNTO_VIAJE_2=40000 echo $TRIP_POINT_0 > /sys/devices/virtual/thermal/thermal_zone0/trip_point_0_temp$ echo $TRIP_POINT_0 > /sys/devices/virtual/thermal/thermal_zone1/trip_point_0_temp$ echo $TRIP_POINT_0 > /sys/devices/virtual/thermal/thermal_zone2/trip_point_0_temp $ echo $TRIP_POINT_0 > /sys/…

• 0

  Reputation Points

• 1 reply
• 3.3k views
• 1 follower

Werner

October 19, 20223 yr

Just updated many armbian files shown as available for update. After the update sudo apt update shows the error message: E: The repository 'http://apt.armbian.com bookworm Release' is no longer signed. N: Updating from such a repository can't be done securely, and is therefore disabled by default. N: See apt-secure(8) manpage for repository creation and user configuration details. How can I fix this or was signing simply forgotten? Thank you!

• 1

  Reputation Points

• 1 reply
• 2k views

SteeMan

January 10Jan 10

Hi there, I have a little problem with my i2c-screen on the Helios4. It was setup according to the Kobol-Wiki and was working right from the start. However after running for some time (in this example it took around 6 hours) the screen is black and empty. Once I SSH back into the helios and restart the systemd sys-oled.service, it works again for some time... "journalctl -u sys-oled.service" gives the following: Sep 13 10:18:38 helios4 systemd[1]: Started System Starting on OLED Display. Sep 13 16:46:01 helios4 python3[23009]: Traceback (most recent call last): Sep 13 16:46:01 helios4 python3[23009]: File "/usr/local/bi…

• 0

  Reputation Points

• 0 replies
• 2.8k views
• 1 follower

m4110c

September 13, 20215 yr

Hi, where can I find kernel headers for RPi5 jammy? linux-headers-6.1.68.current-bcm2712 ? This version of Armbian is really usefull because it is the only one that can run a version of ROS natively on a RPi5, but I need the headers to build drivers Thanks

• 1

  Reputation Points

• 10 replies
• 13.4k views

J.Ayuso

February 2, 20242 yr

W: Size of file /var/lib/apt/lists/apt.armbian.com_dists_jessie_jessie-utils_binary-armhf_Packages.gz is not what the server reported 5780 5784 W: Size of file /var/lib/apt/lists/httpredir.debian.org_debian_dists_jessie-backports_main_binary-armhf_Packages.gz is not what the server reported 1122303 1123712 Get this when first doing apt update after fresh install. HC1 Jesse. I assumed at first it was network error, but this is consistent. Have downloaded and checksummed successful. Assumed then it was the SD card, replaced and have now tried several. Power supply is solid. I believe the hardware and bandwidth / router are fine. Simply repeat ap…

• 0

  Reputation Points

• 1 reply
• 2.9k views
• 1 follower

Pavel

December 20, 20187 yr

Hi, I have recently installed armbian-config on my HC1 running OMV and switched to -current kernel from -legacy. Unfortunately, now whenever I soft-reboot following a kernel update, the sda drive is missing: [ 6.161366] usbcore: registered new interface driver usb-storage [ 6.180240] scsi host0: uas [ 6.181260] usbcore: registered new interface driver uas [ 6.182155] scsi 0:0:0:0: Direct-Access JMicron Generic 3102 PQ: 0 ANSI: 6 [ 6.193271] sd 0:0:0:0: [sda] Unit Not Ready [ 6.193290] sd 0:0:0:0: [sda] Sense Key : 0x4 [current] [ 6.193302] sd 0:0:0:0: [sda] ASC=0x44 <<vendor>>ASCQ=0x81 [ 6.194247] sd 0:0:…

• 1

  Reputation Points

• 23 replies
• 10.7k views
• 2 followers

rosbeef

May 2, 20215 yr

I had to reinstall on my Linux desktop due to a hard drive failure. I copied the mounting language in my /etc/fstab file and now it times out on mounting. This is my mounting entry which worked fine before 192.168.0.123:/mnt/md0 /mnt/RAID nfs rw,_netdev,hard,intr,rsize=8192,wsize=8192,timeo=14,user 0 0 That used to work. I made no changes to my Helios4. When I try to mount it manually, this is what I get: mount -av mount.nfs: timeout set for Fri Jul 23 07:26:16 2021 mount.nfs: trying text-based options 'hard,intr,rsize=8192,wsize=8192,timeo=14,vers=4.2,addr=192.168.0.123,clientaddr=192.168.0.2' mount.nfs: mount(2): Connection refused mount.nfs: tryi…

• 0

  Reputation Points

• 6 replies
• 4.7k views
• 1 follower

Werner

July 26, 20215 yr

I tried updating my kernel to self-built 5.4.173 as usual. I got some errors during installation due to low space on /boot, but after removing leftovers of 5.4.168 the installation worked as expected. Something went wrong though, as my HC1 no longer boots. This is shown via UART: All the files seem to be on the SD card: $ ls -l insgesamt 32447 -rw-r--r--. 1 root root 64 8. Jan 16:27 armbianEnv.txt -rw-r--r--. 1 root root 0 6. Sep 2019 armbianEnv.txt.out -rw-r--r--. 1 root root 1536 29. Mai 2018 armbian_first_run.txt.template -rw-r--r--. 1 root root 38518 29. Mai 2018 boot.bmp -rw-r--r--. 1 root root 4882 29. Mai 2018 boot-desktop.p…

• 1

  Reputation Points

• 39 replies
• 13.8k views

belegdol

June 17, 20224 yr

BPI-F3 Introduction For this device, we can make an image using the Source Code: BananaPi_BPI-F3#_development Let's try to add support to the Armbian build system.

• 1

  Reputation Points

• 3 replies
• 3k views

Lion Wang

June 24, 20242 yr

abm.tar.gz

• 0

  Reputation Points

• 1 reply
• 3.7k views

kdeenkhoorn

May 14, 20206 yr

My System: ODROID XU4 Armbian stable: Linux odroidxu4 4.9.56-odroidxu4 USB-3 HDD Cage with 3 SATA drives, connected to XU4 via USB2-HUB (Since XU4 onboard USB3 does not recognize drive cage, never has) The drives are 1.5TB, 3TB and 4TB in size. All have one partition of full size and are encrypted with luks/dm-crypt. I'm switching from a Debian 8 system on the XU4, which had no problem with disk decryption. After the initial setup on Armbian I'm now trying to use those disks. I can successfully decrypt and mount the 1.5 TB disk. But when I do cryptsetup luksOpen /dev/disk/by-uuid/9ef4da01-8c26-48f1-a945-d2f419068e2f somename th…

• 0

  Reputation Points

• 11 replies
• 5.1k views
• 1 follower

suchende

December 25, 20178 yr