Allwinner sunxi

Hi, I'm using 4.19.57-sunxi64 on a NanoPi NEO Plus2 and I'm wondering if there's a way to change some USB configurations just like I'd do with the cmdline.txt file on a RPi? I want to do some testing with USB over IP and for that I'd like to tweak the usb modules for better performance, liability. My armbianEnv.txt is as follows: Thanks in advance!

Hello, running ARMBIAN 5.59 stable Debian GNU/Linux 9 (stretch) 4.14.65-sunxi on Banana Pi pro /var/log is always full df -h /dev/zram0 49M 48M 0 100% /var/log root@mail:/etc# zramctl NAME ALGORITHM DISKSIZE DATA COMPR TOTAL STREAMS MOUNTPOINT /dev/zram0 lz4 50M 47.5M 7.8M 8.4M 2 /var/log /dev/zram1 lz4 249.7M 4K 63B 4K 2 [SWAP] /dev/zram2 lz4 249.7M 4K 61B 4K 2 [SWAP] Since i am running on sata (ssd of 128gig) i dont need that. Cannot find how to stop the mount of /var/log on /dev/zram0. Not in fstab. Want to use the real /var/log from / (root).

Hello all, I used using opi one with (Armbian_5.90_Ubuntu_bionic_4.19.57) image. and used the uart0 pins for hardware pwm but the output was around 330mv pwm not 3.3v as i want. my initial thoughts was either the uart0 isn't disabled or there are no pull ups activated, although i tryed using this: https://github.com/iboguslavsky/pwm-sunxi-opi0 Remap pins in FEX: ; Disable debug UART0 [uart_para] uart_debug_port = 0 uart_debug_tx = port:PA04<2><1> uart_debug_rx = port:PA05<2><1> ; Enable PWM0 on PA05 [pwm0_para] pwm_used = 1 pwm_positive = port:PA05<3><0> bu…

I'm willing to dusto off my H3-based Orange PI+ 2, because of all the great work that has being done recently on kernel 4.20, 5.0, 5.1 etc to support both H3 and Mali 400/450. However, for some reason, it seems that my board (even though it's officially supported) hasn't been updated past 4.19 kernel, so all the cool things are missing. On the other hand there are some WIP/no-yet-supported Orange Pi boards that DO support 5.1 kernel, so I'm a little bit confused. Is there any roadmap for newer kernels on H3 boards?

Hi, I would like to use wiringPi for my NanoPi Neo Air, but after installing wiring P, I only get unable to determine board revision as output from gpio readall. I tried this approaches already: Could someone please explain me how to build wiring P for NanoPi Neo Air so that it is working? On NanoPi Neo Plus 2, I did not have to change anything when installing wiringNP under Armbian.

Here is uploaded image showing problem with text overlapping. I googled without success, so if anyone could suggest how to try fixing it. Chromium version is 76.0.3809.100 (Official Build) Built on Ubuntu, running on Ubuntu 16.04 (32-bit) on Orange Pi Lite. It is not big deal, but if there is easy fix why not to try.

Hi Guys, After a long time after the release Linux kernel 4.x I want use the I2S on Lime2 (Armbian Stretch kernel 4.14.14), but I2S interface did not work. I was add activation of overlays i2s0 and i2s1 into/boot/armbianEnv.txt root@lime2:~# cat /boot/armbianEnv.txt verbosity=1 logo=disabled console=both disp_mode=1920x1080p60 overlay_prefix=sun7i-a20 rootdev=UUID=dcf7af80-8026-4e99-870f-f0d35f926063 rootfstype=ext4 overlays=i2s0 i2s1 usbstoragequirks=0x2537:0x1066:u,0x2537:0x1068:u After reboot I can't see I2S interfaces... root@lime2:~# aplay -l aplay: device_list:270: no soundcards found... root@lime2:~# lsmod | grep snd snd_soc_core 118…

Hey everyone... I have an Orange pi zero Plus2 h5. The SD card load and boot is working fine. However, i just realized i have no way to connect a keyboard and mouse to it to finish the setup. Is there a way around this like possibly inserting the armbian formated sd card into a linux system and changing config files?? If not, how can i attach a usb port to it?? Thanks.

Hello everyone! can anyone help with latest debian/ubntu on Opi1+ and emmc storage. There is no /dev/mmcblk1p* . Only /dev/mmcblk0p* (microSD). Aslo there is no option in armbian-config...

Hi, Is there a way to fix emmc booting problem from uboot itself, i've updated armbian and now orangepi pc+ doesn't boot, i've connected uart and i see that it reads /boot/boot.scr from mmc 1, but then tries to load stuff from mmc 0, so i guess my boot.scr got overwritten by default one .. or something. boot shows this => boot switch to partitions #0, OK mmc1(part 0) is current device Scanning mmc 1:1... Found U-Boot script /boot/boot.scr 3565 bytes read in 6 ms (580.1 KiB/s) ## Executing script at 43100000 U-boot loaded from eMMC or secondary SD Boot script loaded from mmc MMC: no card present ** Bad device mmc 0…

I want to downgrade the kernel because auf random freezes on my Banana Pi and was following this tutorial to downgrade to Mainline stable kernel (Armbian 5.31): At apt.armbian.com I can find all required packages except for: linux-firmware-image-next-sunxi According to the linked thread I need this package otherwise the system may not start anymore. Could someone tell me where to find that package? Thanks :-)

Hút bể phốt số 1 hn – địa chỉ nào tốt nhất Tại Hà Nội hiện nay, tình trạng tắc nghẽn, đầy bể phốt thường xuyên diễn ra gây ảnh hưởng nghiêm trọng đến cuộc sống sinh hoạt của người dân. Một trong những giải pháp tốt nhất trong những trường hợp này đó chính là sử dụng dịch vụ hút bể phốt của đơn vị hút bể phốt số 1 hn - Công ty hút bể phốt Avico với chất lượng dịch vụ hoàn hảo nhất. >>> Mời các bạn xem thêm về Dịch vụ hút bể phốt tại quận Hoàn Kiếm Avico : https://hutbephottaihanoi.vn/hut-be-phot-tai-hoan-kiem/ Những lý do khẳng định Avico là đơn vị hút bể phốt số 1 hn Trên thị trường hiện nay có vô vàn đơn vị cung cấp đến với người dùng trên thị trư…

my code works just fine when executed during ssh session on NANOPI NEO CORE (booted from emmc) ! when trying to make this code run automatically on startup which is something that i have done before, unexpected delay happens after 5 seconds of continuous taking data from mic to be sent on serial port ! could not figure out what is really going on ! does it differ in terms of configuration of the nanopi when logged in through ssh !? or is there some configurations that must be handle on startup scripting !?

I have a number of OrangePi0. (Custom 3D printed case, 2 extra ethernets on USB. Still have some heat issues even with heat sinks) opi0F has linux-image-next-sunxi 5.92 opi0A has linux-image-next-sunxi 5.37 just because of when they were upgraded. mcr@opi0A:~$ ls -l /lib/modules/4.14.7-sunxi/kernel/net/ipv6/ip6_gre.ko -rw-r--r-- 1 root root 21556 Dec 20 2017 /lib/modules/4.14.7-sunxi/kernel/net/ipv6/ip6_gre.ko root@opi0F:~# ls -l /lib/modules/4.19.62-sunxi/kernel/net/ipv6/ip6_gre.ko ls: cannot access '/lib/modules/4.19.62-sunxi/kernel/net/ipv6/ip6_gre.ko': No such file or directory Is there some reaso…

I apologize for asking such a basic question. I have recompiled the wifi module on an Orange Pi PC+ to operate in concurrent mode so it can act in both station and AP mode at the same time, allowing it to be a wifi repeater. The problem is, this feature is lost on every kernel upgrade, requiring me to recompile the module each time I upgrade the kernel. The kernel module driver often changes slightly between kernel versions, and I have to track down and fix new bugs in the source code that prevent it from compiling when concurrent mode is enabled. I'm happy with how the wifi module performs now, but don't want to lose the ability to get needed kernel updat…

Hardware setup :: Olimex Lime 2 Rev.k + 7" LCD + 5V power supply through the power jack. No battery is connected to the lime 2 board. Problem :: when the board boots up, the xfce power manager shows that the Battery is connected and it's in charging mode. The current charge value of the battery changes randomly like 92%, 56% and etc. When it reaches 0% the board will shut down. It completes the shut down procedure. The following is the terminal output, to find the battery status. Even though the battery is not connected you can observe that it returns the Voltage and reports that the battery is present root@olinuxino:~# cat /sys/class/power_sup…

I wanna start out and say I have been using Armbian for a year and it's been great. Thank you. I have built many images over the year and have only noticed the issue recently. I have noticed in the bionic builds for OpiZ+ that some base level packages are missing. The one I noticed was netplan. This is the new standard for bionic. I have not compiled a complete list of missing packages at this time. I had built this image before around 5.0-5.1 kernel release without issue. Netplan was included. Current build at 5.3 RC does not include this package. I suspect that others may be removed. Are these packages missing intentionall…

I want to use my GPIO pins on my OPi lite. After much research and testing, I have done the following - Add user pi to group gpio - Changed /etc/udev/rules.d/99-gpio.rules to SUBSYSTEM=="gpio*", PROGRAM="/bin/sh -c '\ chown -R root:gpio /sys/class/gpio && chmod -R 770 /sys/class/gpio;\ chown -R root:gpio /sys/devices/platform/soc/1c20800.pinctrl/gpiochip0/gpio && chmod -R 770 /sys/devices/platform/soc/1c20800.pinctrl/gpiochip0/gpio;?\ '"???? Now, accessing GPIO pins is working fine via bash: (env) pi@orangepilite:~$ echo 65 > /sys/class/gpio/export (env) pi@orangepilite:~$ echo out > /sys/class/gpio/gpio65/direction …

I'm using flir's usb 3.1 camera with OrangiPi 3. default value for usbfs_memory (/sys/module/usbcore/parameters/usbfs_memory_mb) is 16. I should change it to a 1000 to be able to use full size image acquiring. testing this number, the higher I set it the higher image size I can get until 256mb. above 256, max image size is aprox 3200x2736 pixels (I need 5472x3648). so I guess somewhere in usbcore / kernel there is additional limit. Liad

I'm trying to add concurrent mode to the wifi driver on an Orange Pi PC Plus running the latest stable distribution of Armbian, but running into an "invalid module format" error due to the kernel version not matching the source version I'm using to recompile the wifi driver. I installed both the source and header files from armbian-config. The kernel version is 4.19.59 according to uname -r. This apparently is the linux-image-next-sunxi image, according to `apt-cache search linux-image | grep 4.19.59`. However, the source for the next-sunxi branch in the repository is 4.19.57, not 4.19.59, as `apt-cache search linux-source | grep next-sunxi` gives: linu…

Hey Guys, i own a Lemaker Banana Pro device. The hardware itself is very fine, no issues with it, but the software support is pretty low. When i check internet, i see at least two images for it: Armbian Bionic - mainline based kernel 4.19.y Armbian Stretch- mainline based kernel 4.19.y I recognize that Armbian Stretch is based on Debian 9, which is the old Debian Version at all, so i am not willing to install it. But i wonder how it is with Bionic? Is Armbian Bionic based on Ubuntu Bionic Beaver? Is it that what i means? How long will the support run for this Bionic image? For me it doesnt matter if i install debian or ubuntu …

Yesterday my 14" Pinebook arrived so I thought I'll collect some already available information. A lot of work still has to be done to get a decent laptop experience with this hardware so this is neither a review nor a stupid Un-Review but just a preview instead. To get the idea about dimensions I added a 13" and a 15" laptop to the picture. Pinebook is wedge-shaped and thickness matches both the 2011 15" MacBook Pro and the 13" from 2015: Display size closely matches the 13" MacBook Pro (but of course pixel density / resolution don't match as well as quality: TN vs. IPS and coating -- it should be obvious if you've the 'you get what you…

I installed the "buster" version on the orange board PI PC. I would like to set it as a dlna server. I have installed package minidlna, but it doesn't automatically mount the hard disks (formatted NTFS) inserted on the USB ports. what should I do ?

I'm sorry, I wrong section of the forum. Question here https://forum.armbian.com/topic/11607-h3-nanopi-neo-core-on-kernel-4x-audio-clickpop-dapm-how-disable-it/

When connecting via a round connector, there is no power to SATA and USB, when connecting power to the USB-OTG, without disconnecting the round connector, power appears, when the power is turned off from the USB-OTG, the power on the ports does not disappear, while rebooting too. I tried to google, but to no avail Thank you in advance

Hi, seems after some system updates SNMP stop reporting data about storage (size/used). It happen on 2x Orange PI One and on one Orange PI PC2. Actually in monitor what I use for SNMP monitoring I see last valid data was there at 05/09. I think at this time I update all boards and as I remmember there was also some update for snmpd. Can anyone confirm this problem ? And when we talk about SNMP, what is best way to change default logging level for SNMP ? Seems changing in /etc/default/snmpd doesnt have effect and after last update I must again edit files in /lib/systemd to stop that annoying flood in log from SNMP. OPI PC2 - 4.…

I am using Olimex Lime 2 Emmc Rev.k for a project. One of the Boards shuts down randomly. Its not a freeze or a sudden power down of the board. The board undergoes a complete shut down procedure. I checked the log entries in /var/log/syslog log file. There is a entry of board going to shut down but I couldn't find the reason for shut down. Is there a way to find out if the board got shut down because of the Power-button press, shutdown command from a SSH client, shutdown because of temperature or shutdown because of under voltage ? Is there a log file i can check to find the reason for shutdown?

Hi, I bought a 3.5 inch RPi LCD display from here: https://www.aliexpress.com/item/32965280840.html?spm=a2g0s.9042311.0.0.2a474c4dxALiQy I connected the display straight to my Orange Pi zero board. The slot on the Orange Pi Zero is flipped compared to RPi so the LCD display goes outside the board. I guess that is the right way to connect. Anyway, when I power on the board I can see illuminated screen. The problem is that everything I have tried to configure the LCD was unsuccessful. I am trying with the Armbian image mentioned in this web site: http://www.orangepi.org/orangepibbsen/forum.php?mod=viewthread&tid=3773 (Armbian_5.35_Orangepizero_Ubuntu_x…

Hi, I know it's a waste of time to play with an old bananapi pro but I think I could do it so I want to do it ! I can't make working PCM5102a DAC. I read a lot of things through different website but noway ! I tried https://forum.armbian.com/topic/9009-info-friendlyarm-pcm5102a-hat-with-nanopi-neo-under-mainline-4xx/ . I've only obtain this next to the step "armbian-add-overlay ./sun8i-h3-I2S-out.dts": $lsmod|grep i2s sun4i_i2s 20480 0 snd_soc_core 114688 2 sun4i_codec,sun4i_i2s snd_pcm 69632 4 sun4i_codec,sun4i_i2s,snd_pcm_dmaengine,snd_soc_core I tried the next step but nothing more: dmesg|grep -i pcm kee…

Hello everyone, I know this is a well known problem of the OPi Zero, but in regarding to "solutions": h3consumption works only with the legacy kernel because of the use of Fex Is there a way to tweak the things h3consumption did in the mainline version? In the mainline version from armbian-config it is possible to disable USB, in /etc/default/cpufrequtils it is also possible to set the maximum frequency and wifi can be disabled. Does anyone know any option for disabling the GPU, limit the DRAM clockspeed and the maximum active cores? Is the only possibility to recompile the kernel, at the moment? Unfortunately the main tu…

I have an orangepizero (https://www.armbian.com/wp-content/uploads/2018/02/orangepizero.png) I installed Armbian_5.90_Orangepizero_Ubuntu_bionic_next_4.19.57.7z on 32GB sd. The pi0 is powered via pin with a 5V/5A power supply, norflash mx25l1606e. The HDD is a new working 80gb maxtor powered by an external USB 2.0 box. I have also connected the serial and read the boot information. I used armbian-config and transferred armbian to HDD and it works, but I have to keep the miniSD plugged in. I ask you can boot from HDD and not use any SD? PS I read almost all posts here on the forum and tried the old procedures but it does not work. Spoiler =&g…

I have an Orange pi +2e running the desktop version of armbian. I want to install armbian to the built in emmc . Armbian is currently running on a SD card when I used the command "nand-sata-install" I got these options. which of those do i select to install Armbian from the SD card to the Built in emmc

Hello, Just find out that my USB ports are not working. Quick dig shows that the are disabled: # lsusb # dmesg |grep usb [ 0.000000] Kernel command line: root=UUID=e8491c09-2260-4706-a9a4-1f9f96af1232 rootwait rootfstype=ext4 console=ttyS0,115200 console=tty1 hdmi.audio=EDID:0 disp.screen0_output_mode=1920x1080p60 panic=10 consoleblank=0 loglevel=1 ubootpart=5b507211-01 ubootsource=mmc usb-storage.quirks=0x2537:0x1066:u,0x2537:0x1068:u sunxi_ve_mem_reserve=0 sunxi_g2d_mem_reserve=0 sunxi_fb_mem_reserve=16 cgroup_enable=memory swapaccount=1 [ 1.308752] usbcore: registered new interface driver usbfs [ 1.308799] usbcore: registered new interface driver hu…

Hello, I have trouble with my SD Card - it goes in Read Only mode. What I have: I have Running System from the HDD (installed by nand-sata-install command) My Cubietruck is online for now, but I'm afraid do switch it off. I try to run dd command to make a backup of RO SD card and reuse image on a new SD card, but it does not succeed: # dd if=/dev/mmcblk0 bs=10M | gzip -c > /media/dataPartition/sdcard.img.gz dd: error reading '/dev/mmcblk0': Input/output error 0+0 records in 0+0 records out 0 bytes copied, 0.00503184 s, 0.0 kB/s I read the forum regarding backup and restore and my question is following: Is there is a way to …

Hi im using Orange Pi Zero +2 H3 with the current armbian image. 4.19 y i think... basically Im using HDMI out but i want to use the analog audio pins on my project. However the pins seem to be disabled and there doesnt appear any way to enable them. alsamixer only shows the allwinner,HDMI but no controls... Pulse audio panel seems less than helpfulp, lists Analogoutput but doesnt actually send any sound out through the pins. I warn you im not a linux power user. I can just about get around terminal but I dont know where files are off by heart or know exactly what and where to edit. So maybe a little hand holding :) Reading …

Hi, as many did, I've bought a (CSI) OV5647 camera from AliExpress and am struggling to get it to work. Been at it for a week now and am at a loss. So i'm trying to get some clarification via this thread on how to get this camera to work. What I've done so far is to compile a mainline kernel (Ubuntu Bionic) and edited the kernel config file to include sun6i_csi and ov5647 driver. Build finishes successfully and am able to boot and load the drivers Unfortunately the OV5647 isn't recognized and /dev/video0 isn't created. Second build included a userpatch I've found online which i applied to no avail to the kernel https…

Hi, I've got an Orange Pi Zero Plus H5 running "Armbian_5.91_Orangepizeroplus_Debian_buster_next_4.19.59.img" but I can't seem to connect to it via the three UART pins next to the Ethernet port. I'm using this adapter using both the Windows supplied and the manifacturer's drivers. I've also tried adding "uart1 uart2 uart3" to the overlays line in /boot/armbianEnv.txt and rebooting but with no luck. I'm using PuTTY on my laptop connecting via COM7 serial port (as shown in Device Manager) with baud rate 115200, but the PuTTY screen stays black with nothing coming in. Is there something that I'm missing?

Hi All. May be I miss something but I do some searching and still can't understand. Problem configuration: Orange Pi PC v 1.2 (try 3 different) fresh loaded Armbian_5.90_Orangepipc_Ubuntu_xenial_default_3.4.113_desktop.img (try different SD cards) any (try 3 different HP 2824, Zyxel Kinect, Cisco SRW2016) If I plug my Orange Pi PC with this image to 1Gb port I'v got blinking of lights and dmesg: [ 818.090335] PHY: gmac0-0:00 - Link is Down [ 819.090497] PHY: gmac0-0:00 - Link is Up - 100/Full [ 821.090494] PHY: gmac0-0:00 - Link is Down [ 822.090314] PHY: gmac0-0:00 - Link is Up - 100/Full [ 824.090335] P…

The Volumio team is currently investigating whether our sopine64 based motivo board (https://volumio.org/epic-journey-called-volumio-motivo/) could boot from usb using SPI flash. I'm aware of the sunxi SPI developments in u-boot and mainline kernel, and that we theoretically should be able to flash the SPI-NOR chip with the correct u-boot version using FEL mode. I also read that armbian has been prepared for booting from usb (as @martinayotte mentioned in other places). My question is, did anyone actually do anything in this direction, is there something I could help testing with? I know how to compile u-boot as I've done this with armbian's u-boot ver…

I have installed the most current Armbian Bionic to a Orange PI zero (512MB). I can't record anything from microphone, as the recording process just hangs forver (blocks). arecord -l gives the following output: **** List of CAPTURE Hardware Devices **** card 0: Codec [H3 Audio Codec], device 0: CDC PCM Codec-0 [] Subdevices: 1/1 Subdevice #0: subdevice #0 arecord -d2 test.wav gives the following output, but hangs till killed with Ctrl-C Recording WAVE 'test.wav' : Unsigned 8 bit, Rate 8000 Hz, Mono ffmpeg -f alsa -i hw:0 -t 5 test1.wav gives the following output, and hangs as well forever: ffmpeg version 3.4.6-0ubuntu0.18.04…

root@orangepizero:/boot# iptables -nL modprobe: ERROR: ../libkmod/libkmod.c:586 kmod_search_moddep() could not open moddep file '/lib/modules/4.14.14-sunxi/modules.dep.bin' modprobe: FATAL: Module ip_tables not found in directory /lib/modules/4.14.14-sunxi iptables v1.6.0: can't initialize iptables table `filter': Table does not exist (do you need to insmod?) Perhaps iptables or your kernel needs to be upgraded. root@orangepizero:/boot# uname -a Linux orangepizero 4.14.14-sunxi #1 SMP Thu Jan 25 12:20:57 CET 2018 armv7l armv7l armv7l GNU/Linux root@orangepizero:/boot# Can someone help me how to fix this issue on Orange Pi Zero - 512 MB board ? I am running Armb…

Hello Community, I want to take a look at Wireguard, now I heard that that Wireguard is supposed to be already integrated in the Kernel of Armbian. Is this actually correct and if yes how do I please active it? Thank you, blub4747

i've an orange pi one and i'm running armbian stretch (mainline) on it after issuing shutdown -h now as root, the green status indicator light goes off. but i noted that the ethernet leds remain on i leave the board powered on after shutdown but since i've already issued shutdown, i assumed that the cpu has stopped while i go on to work on my pc. some minutes later, i accidentally touch parts of the board and it is extremely hot, every part of the board i'd say it is probably well higher than 100 deg C, possibly a fire hazard do be careful about this as i think the behavior after shutdown is different from ubuntu xenial. for ubuntu x…

Hi i have a problem trying to load the drivers of this camera, could you help me? Issue: mobprobe: FATAL: Module ov5647 not found in directory /lib/modules/4.14.84-sunix Board: Orange Pi Lite Camera sensor: OV5647 fisheye OS: Ubuntu - Armbian 5.65

Hi, I'm not seeing any audio device on my board. # aplay -l aplay: device_list:270: no soundcards found... Any solution? # uname -a Linux jacki-orangepi3 5.2.5-sunxi64 #5.92 SMP Fri Aug 2 07:51:38 CEST 2019 aarch64 GNU/Linux

Hi to all, I am using a cubietruck as an alarm camera detector with eyeone, but now i want to have new life for it ... Is it possible to output from vga a 15khz CRT signal to connect to a CRT tv 384x224? Thanks for all...

Hello Got a new board recently and trying to load the latest image Armbian 5.90. I get crashes with every boot: Starting kernel ... [ 9.306138] Unable to handle kernel paging request at virtual address ffff00007bfa3420 [ 9.314093] Mem abort info: [ 9.316964] ESR = 0x96000005 [ 9.320170] Exception class = DABT (current EL), IL = 32 bits [ 9.326418] SET = 0, FnV = 0 [ 9.329469] EA = 0, S1PTW = 0 [ 9.332606] Data abort info: [ 9.335484] ISV = 0, ISS = 0x00000005 [ 9.339315] CM = 0, WnR = 0 [ 9.342282] swapper pgtable: 4k pages, 48-bit VAs, pgdp = (____ptrval____) [ 9.349161] [f…

How enable tv out on mainline kernel 4.19? script.bin not found and stevenj/h3-tve not working on my version of kernel.

From the armbian page, i downloaded and installed the... Armbian Stretch mainline based kernel 4.19.y Server or light desktop usage scenarios. High level of software maturity ...for my orangpiplus2e. I was able to create the login and password and get sudo powers. But the screen does not go to the GUI, it just stays at the CL. I log in to the 'tty1' login with u and p. I get the "general system configuration beta: armbian-config]. After that it says "host@server: ~$ I don't know what to do next, if anything, or if it is supposed to automatically take me to the GUI desktop. It does not seem to be connected to the interne…

Dear all, My small server based on the Cubietruck board and Armbian OS (ARMBIAN 5.38 stable Debian GNU/Linux 9 (stretch) 4.14.18-sunxi) runs flawlessly since over 2.5 years now. And I am very happy with this setup. Lately, I installed a battery (5.3 Ah 3.7 V) in order to have the server a bit portable. The battery. driven system runs approx 9 - 10 h. Since I want to prevent that the battery drains out completely I configured the following cronjob: */15 * * * * /home/ncuser/nc_batt_cap_shutdown.sh > /dev/null 2>&1 The content of the script looks as follows: #!/bin/bash ### Script idea taken from: # http://www.schulz-alex.de…

Hi everyone, I am using nmtui to setup static ip both eth0 and wlan0 on orange pi zero. It works fine if only one of them was activated I want to use both. If LAN cable was be connected into pi, the board is run on ethernet. On other side, run on wifi when the cable was pluged out When I rebooted the pi without LAN cable, the eth0 auto activated lead to I can't access the module via wifi even though it is connected successful. I must connect via serial and disable eth0 after that I connected via wifi.

Hi. I'm trying to connect my orange pi to pc using UART3 but it doesn't work. I connected UART3 to my pc using USB to serial converter and my pc recognized it. so I open a serial session in putty. then when I tried to connect in orange pi it doesn't work. I tried command minicom -b 9600 -D /dev/ttyS3 but it doesn't work. system properties: Linux orangepipcplus 4.19.62-sunxi #5.92 SMP Wed Jul 31 22:07:23 CEST 2019 armv7l GNU/Linux dmesg | grep tty output: [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rootwait rootfstype=ext4 console=ttyS0,115200 console=tty1 hdmi.audio=EDID:0 disp.screen0_output…

Hi, I have a Opi zero 512 and did a fresh install Debian Buster with Armbian Linux 4.19.59-sunxi I installes the Linux-Kernel but I run into problems with compiling a driver. outdoorpi@orangepizero:~/usb-redirector-linux-armeb-gnueabihf/files/modules/src/tusbd$ sudo make KERNELDIR=/usr/src/linux-source-4.19.57-sunxi64 make -C /usr/src/linux-source-4.19.57-sunxi64 M=/home/outdoorpi/usb-redirector-linux-armeb-gnueabihf/files/modules/src/tusbd modules make[1]: Entering directory '/usr/src/linux-source-4.19.57-sunxi64' CC [M] /home/outdoorpi/usb-redirector-linux-armeb-gnueabihf/files/modules/src/tusbd/driver.o /bin/sh: 1: scripts/basic/fi…

I tested with Armbian Stretch image on NanoPi-NEO-Core2. PJSIP VoIP Client. MIC input does not work. Additional USB sound cards work well. In FriendelyARM original firmware, MIC input works well. I hope that this issue will be resolved. Please help me.

Hi Everybody. Can anyone publish step by step guide of building working solution of orange pi PC + ov5640. I mean something like: 1. Buy this ov5640 camera 2. Buy this cable 3. Connect so ... 4. Download this OS image. 5. Change this and that in configuration files Thank you P.S. I spend 2 days reading forum but still don't understand how to get work my Orange Pi PC + ov5640

I have gotten Oops a few times, now this morning I got it again I can see that is says "Segmentation Fault". I could still issue sudo armbianmonitor -u so I included those logs. Since I was also connected to both via SSH, where I was running "armbianmonitor -m" and logged in via serial I include the output of those windows below: SSH output: ... Time CPU load %cpu %sys %usr %nice %io %irq CPU C.St. 00:56:54: --- 0.00 0% 0% 0% 0% 0% 0% 40.1°C 0/15 00:57:00: --- 0.08 1% 1% 0% 0% 0% 0% 40.1°C 0/15 00:57:05: --- 0.07 1% 0% 0% 0% 0% 0% 40.1°C 0/15 00:57:10: --- 0.06 1% 1% 0% …

board: http://nanopi.io/nanopi-neo-core.html image: Armbian Bionic mainline based kernel 4.19.38 from https://www.armbian.com/nanopi-neo/ There are two SPI separated buses with separated pins on NanoPi Core: SPI0 and SPI1 /boot/armbianEnv.txt: ... overlay-prefix=sun8i-h3 overlays=analog-codec i2c0 spi-spidev uart1 usbhost3 param_spidev_spi_bus=0 ... /dev/spidev0.0 presents How to activate a SPI1?

Hi everyone, I have the OV5640 game ver1 image sensor with ARMBIAN 5.75 stable Debian GNU/Linux 9 (stretch) 4.19.20-sunxi64. Why does the kernel 4.19.* not support the OV5640 driver? How can I add this driver manually to the kernel? I noticed that the Orange Pi Zero Plus2 H3 kernel has OV5640 driver.

Hi, i have a problem with my two Orange Pi Zero´s The Orange Pi Zero´s are installed with the latest Armbian_5.59_Orangepizero_Ubuntu_xenial_default_3.4.113 Both Opis are only connected to 5V2A over the microUSB Port and the LAN Port (not WLAN) and use a recommended Sandisk 16GB microSD Card. Both Pi´s are not reachable over SSH maybe 15 Minutes after boot. Direct after the boot SSH is working. Other Services like ping and the installed snmp deamon are working pretty well. Only SSH access stops working after maybe 15 Minutes. There is nothing connected to the OPIS. Is there a known problem with SSH deamon? Greets and thx for help …

Image of Armbian buster 4.19 Does not work on pine64 A64 2G. There is only a black TV screen. No image problem Armbian Xenial 4.75. help

Running "sudo armbianmonitor -r" fails with this output: Installing RPi-Monitor. This can take up to 5 minutes. Be patient pleaseE: Unable to locate package rpimonitor /usr/bin/armbianmonitor: line 694: /usr/share/rpimonitor/scripts/updatePackagesStatus.pl: No such file or directory Now patching RPi-Monitor to deal correctly with H3 Now you're able to enjoy RPi-Monitor at http://192.168.11.149:8888 It isn't possible to access RPi-Monitor on http://192.168.11.149:8888. The folder /usr/share/rpimonitor does not exist. This is on a Nano PI Neo Air board with freshly installed "buster". (would have included armbianmonitor -u output but that g…

Hello ! I have a Banana Pi M3 that has 0 output on every pin. I measured 0 output using an oscilloscope. I have been on all of the forums I can think of and I got no answer. How can I make the pins of this damned board work like the ones from a Raspberry Pi ? How does one define a pin ? What does defining a pin means ? Because the pins look dead to me. How do I make them start ? How do I make them to output something... anything ? I am a total and complete noob and I have no idea of the kernel voodoo that has to be done. I am using ARMBIAN 5.83 stable Debian GNU/Linux 9 (stretch) 4.19.38-sunxi

Hello, is the new Orange pi Zero LTS supported by Armbian? It's the same chip and same stuff but they claim they have reduced the power consumption and lower the board’s temperature. Do you think they have archived that by manipulating the hardware or by lowering the frequency and stuff via software?

Hi, I could not able to download and install any packages, following is the eg. i was trying to install dkms package sudo apt install dkms Reading package lists... Done Building dependency tree Reading state information... Done E: Unable to locate package dkms in addtion apt update is running partial , throwing errors as below sudo apt update Get:2 http://ports.ubuntu.com bionic InRelease [242 kB] Hit:3 http://repository.olimex.com bionic InRelease Get:2 http://ports.ubuntu.com bionic InRelease [242 kB] Err:1 https://apt.armbian.com bionic InRelease Could not wait for server fd - select (11: Resour…

Help me! 1. I was downloaded images from https://www.armbian.com/orange-pi-prime/ 2. then write to SD Card (32Mb) using Etcher (i was try Ubuntu and Debian) 3. insert card, turn on power, begin loading 4. but i see "starting kernel" message and loading stopped! Why?

Hello everyone, I am encountering problem with pulseaudio on Bananapi M1. I don't want the board to suspend speakers on idle. As Pulseaudio is used I simply commented this line: ``` ### Automatically suspend sinks/sources that become idle for too long #load-module module-suspend-on-idle `` in `/etc/pulse/default.pa`. The problem is that if I play something e.g. raspotify I dont hear the sound anymore. As soon I keep raspotify playing and restart Pulseaudio (killall pulseaudio) the sound is back again. If I pause music I lose sound again and need to kill pulseaudio. Does anybody encounter same thing?

first i was able to boot my nanopi from SD card and i was able to access it through SSH. then i was trying to boot my nanopi from EMMC but it was not booting. I already installed a different OS which is specialized for Eflasher (nanopi-neo-core_eflasher_friendlycore-xenial_4.14_armhf_20190522 ) . then i followed the steps carefully: http://wiki.friendlyarm.com/wiki/index. ... i_NEO_Core note : i was using commands since there is no HDMI. I typed : eflasher then i choose 1 and typed yes and waited until the OS was installed successfully and finally i powered off the nanopi, removed the SD card as mentioned, tried to power it on but i coul…

when unpacked to the home directory: user@nanopiair:~/linux-source-5.1.0-sunxi$ find . -xtype l ./debian/hdrtmp/lib/modules/5.1.0-sunxi64/build ./drivers/net/wireless/rtl8812au/include ./drivers/net/wireless/rtl8812au/platform ./drivers/net/wireless/rtl8812au/hal ./drivers/net/wireless/rtl8812au/os_dep ./drivers/net/wireless/rtl8812au/modules.order ./drivers/net/wireless/rtl8812au/core ./net/wireguard/tools/wg-quick/wg Didn't stop me from doing what I needed. All the rtl8812au symlinks point to /home/igorp/samsung/cache/sources/rtl8812au/*

hello I have a module of teleinformation on my GPIO port which must work on the UART 3 but I do not know at all how to configure it and it does not work, could you help me? I am under armbian 5.90. here is the link to my telinformation module: PiTinfo thank you in advance for your help

Hello to all! I'm using orange Pi pc with Armbian Xenial desktop legacy kernel 3.4.113-sun8i and i'm not able to configure mpv to play correct .avi videos. Like suggest in some old posts if try vo=vdpau video works but immages are very distorted (big pixel and strange color), instead if i use vo=x11 immages are ok but video plays very slow. With vo=vx MPV dont start. Has been found a solution?

Hello, Is there any conclusion how to het wifi to work on OPi zero? I am on buster. I have disabled wlan power management (at least ifconfig says that "Power Management:off"), I have changed to performance governor, but still. After some period (like 5-20 mins) it drop all connections and become unresponsive (you can't even ping) for some time, and then work again. For short time again. What is really strange, as some point I was able to ping some external hosts from OPi (from session over serial) and at the same time, I could not ping OPi from my laptop. Once I tried to ping my laptop from OPi, then immediately my laptop started to ping OPi…

Hi I would like to ask you can I connect my NanoPi Neo Core 2 (Armbian) with LCD TFT 3.2 (320x240)px by GPIO and SPI. RPi driver module LCD-show is nor response and don,t work. Anybody has experience or know how to do that. Is it possible.

Hello, When configuring I2C ports in armbian-config it shows 3 I2C ports (i2c0,i2c1,i2c2). The pinout from http://linux-sunxi.org/Xunlong_Orange_Pi_Zero shows only 2 I2C ports: 3 TWI0_SDA / PA12 / GPIO12 5 TWI0_SCK / PA11 / GPIO11 and 16 TWI1-SDA / PA19 / GPIO19 18 TWI1-SCK / PA18 / GPIO18 are there 3 or only 2 I2C ports ? (how to configure the third if there is one ?) thanks for your answers Jean Antoine

verry bad screen with armbian-config and alsamixer using ( lxterminal, mate terminal, putty on Linux mint Buster ) works better with xterm , on previous armbian version Jessie or stretch it's fine with all terminals . 2 first screenshoot are made on lxterminal , third on putty . the 4th one is my dialog menu and it's ok on all terminals

Hi All , i just tried stretch and buster there is a problem with PA10 configured "IN" problem seems to be on kernel > 4 old method for GPIO works perfectly , i have read that FEX is no longer availlable on 4.X kernel . PA10 il also used by SPI ( pin 1) . SPI is not enable on /boot/ArmbianEnv.txt. this script works perfectly on 3.x kernel but crashed GPIO 10 and GPIO 7 on 4.x kernel , when PA10 configured in "INPUT" and receive a +3.3V it crashed and seems to stay up indefinitively nothink on logs , PA7 can't become up in OUT mode i think there is a problem with SPI and GPIO on 4.X kernel I can't change GPIO pin on my pr…

hi i would like to install vlc 2.2.7 or vlc 3 on armbian xenial 5.90 stable two month ago i used to do apt-get upgrade & apt-get update then vlc 2.2.7 can be installed no problem now even apt-get upgrade break the system and i get two instance of desktop now i only get vlc 2.2.2 wich have bugs is there a way to install vlc 2.2.7 at least ? orange pi one

Hello Armbian community. I have tried to start the latest image of Armbian Xenial Desktop on my cubieboard 2 and it does not work. I have exactly the same issue as this previous issue:

So when I try to run the Buster image for Olinuxino64, after the initial U-Boot screen it spends some excessive time with lines Starting version 241 (about a minute or two) Begin: Running /scripts/local-premount ... Scanning for Brtfs filesystems. done. (many minutes. Does it have anything to do with the fact I have some old data on the on-board eMMC?) These appear on the splash screen with armbian logo via HDMI, not on the serial console. When it finally boots, USB keyboard is not working (nor USB in general, dmesg shows nothing when i try to plug/unplug various devices) and the system is very unstable... It took me several times to even run armb…

Hello all, I have a 5" waveshare touch screen connected (touch screen cable) to an orange pi one through usb with a separate power cable for screen, and it works fine. but when I used the (microusb to microusb cable) for the touch it doesn't work.. is there any way to make it work!? because i need the usb for something else and i can't use a usb hub for it's too big for my application. Regards,

Hi! Just saw a new board from FriendlyARM - NanoPi R1 (https://www.friendlyarm.com/index.php?route=product/product&path=69&product_id=248). It based on Allwinner H3, has dual Ethernet port, wi-fi and Bluetooth, USB, and onboard eMMC. Memory options are 512MB or 1GB. It comes in a case, just add power supply. Looks quite fun SBC for IoT and for micro router. I was unable to find Armbian images for this board. Could you please comment if is it possible to use images for other Allwinner H3 boards? Do you have any plans to support this board? Thank you in advance for your comments!

I noticed that the orange pi win plus does not have a sata port connector. Is there a way to attach a sata ssd/hdd to the orange pi win plus through the gpio pins?

ARMBIAN 5.75 stable Ubuntu 18.04.2 LTS 4.19.38-sunxi Orange Pi Zero Board Please refer armbianmonitor.log for armbianmonitor -U command output details I have configured My Orange Pi Zero onboard wlan chip (xradio_wlan driver) to work on both Ap mode and Client modes simultaneously. When both Ap and Client interfaces are up and working, and when the connected wifi channel of the Client interface changes, kernel hang occurs. Error message [20148.872296] rcu: INFO: rcu_sched self-detected stall on CPU [20148.877893] rcu: 1-....: (4945709 ticks this GP) idle=8aa/1/0x40000002 softirq=9640/9640 fqs=2447771 [20148.887182] rcu: (…

install to SDCard: Armbian_5.89.190626_Orangepi3_Debian_stretch_dev_5.1.12.img update, upgrade install image to EMMC 8GB install lxde (desktop) I rarely have a reset, I think the processor is overheating. Can I reduce the speed without using the fan? (settings debian) for experiments, psensors would be good https://askubuntu.com/questions/41794/how-to-monitor-log-server-hardware-temperatures-load https://oss.oetiker.ch/rrdtool/download.en.html

Hi, Is there any instruction available for upgrading a orange pi+ 2e from stretch to buster? I have found Jessie to stretch instructions. Can I use them? Change .list files stretch to buster? Do I need to uninstall any packages? What packages in that case? Thanks

I have orange pi one with Armbian Xenial desktop legacy kernel 3.4.y which have a script.bin file in /boot directory and doesn't have /boot/dtb directory ...but when i installed Armbian Bionic mainline based kernel 4.19.y, I found the .dtb files but not the script.bin ....now i don't know how to configure both touch screen and the pwm pin! is the .dtb file (sun8i-h3-orangepi-one.dtb) is the same as script.bin or orangepione.bin ? if so, how to configure it? because i am used to convert the script.bin to .fex to configure it and then back to .bin.

no led, no output, tried it with 3 different 16gb class 10 sandisk sd cards, previous versions works fine, and i also tried the download from torrents and the direct downloads, still nothing

Hello! Could you please help me to recover my sd card on Cubietruck? 1. i've made dd copy from my sd card without options. 2. I was delete(mistake) some files from /boot. Dont ask me why.... 3. I was use the same sd card from clean new system from same board. 4. system started, but it clean - without soft. And sda1 (hard disk) have all information before crash. Question - how to repair my system -=))) please.

The essence of the problem is this. I work with Orange PC Plus microcomputers. I used to use the Armbian_5.25_Orangepipcplus_Ubuntu_xenial_default_3.4.113 distribution And so the device address was HW Address: fa: 20: 6d: b5: 65: bd But when installing new distros Armbian MAC becomes different. HW Address: 12: 81: ab: 1a: 39: 92 Permanennt HW Address: 12: 81: ab: 1a: 39: 92 I really need the MAC to be like before. And it did not change when reinstalling the OS. How to do it?

I flashed a fresh card with the LIME2 image. On boot, the bootloader loads. Once the kernel starts to load, I lose the display on HDMI. It is being powered over mini-usb, from a powered hub. No additional peripherals. It looks like the system is running (based on the Ethernet), but HDMI isn't displaying (the monitor says no signal). I'm able to connect over ssh.

hi we are using legacy armbian xenial desktop wich work great with most rtl based dvb-t tuners we would like to add a new rtl2832 usb tuner with specific vendor id to be recognized : using x86 pc first we patched dvb-usb-ids.h with new vendor id then compiled and installed media_build ,result is success & dongle working well using orange pi one : building media_build give error . is there a way to patch the new vid thanks

Hello, I would like to download the Armbian Buster image. This is not possible due to missing links. The Bionic is download link is working though. Sheers

I have an Orange Pi PC Plus and I'm looking for a USB video grabber. Could you suggest me some models which are easy to setup and work with OPi reliably?

Hello, I can get 5.90 Bionic to boot, but Unifi needs an old mongodb. Stretch 5.65 worked in the past, but 5.83 will not boot. It hangs after "[ OK ] Started udev Coldplug all Devices." I've tried many, many times. Any idea what this means? I also can't get Stretch 5.65 to work again. It does not boot after a dist-upgrade

Hello, I wonder how to use built in microphone on Orange Pi one +? root@orangepioneplus:~# arecord -l arecord: device_list:272: no soundcards found... Thanks

I have a cubietruck at my cabled network (RJ45). Using Ip Scanner tools, I only find it by MAC address. The manufacturer name have nothing, how can I put a manufacturer name to help me find it? Other computers show their manufacturer names.

Hi, I've installed armbian for Orange Pi 3 (Buster) Everything works great, and the system boots, I even copied to the EMMC for booting from the Flash. The only problem is that the status LED stays "RED" and doesn't turn "GREEN" right after booting, like it does in the orangePi official debian. How can I make it GREEN? Thanks Leon

I'm trying to replicate a flash drive using an ISO file. My system is running the latest Ubuntu next kernel. Here is how I am mounting an ISO: # Mount sudo modprobe g_mass_storage file=/home/pi/mini.iso # Remove sudo rmmod g_mass_storage Here are the two types of results I get from three different images. (Ubuntu net install, Need for speed 2 iso, custom made iso) It's definitely being detected. However it's appearing as either empty partitions or unallocated.

Hello There seems to be a problem with the latest kernel 4.19.53-sunxi64. I cannot configure the 1-wire support. In ArmbianEnv it is configured as: overlays= w1-gpio param_w1_pin=PD4 param_w1_pin_int_pullup=1 Than in /etc/modules-load.d/modules.conf I have: w1-gpio w1-therm with the dmesg | grep w1 I get: root@bananapim64:~ # dmesg | grep w1 [ 4.452698] w1-gpio onewire@0: gpio_request (pin) failed [ 4.452724] w1-gpio: probe of onewire@0 failed with error -22 root@bananapim64:~ # cat /sys/kernel/debug/gpio …

I try to use DS1302 RT Clock for my Orange Pi One that uses armbian. I connected this way: DS3102 VCC -> OrangePi pin 2 ( 5V ) DS3102 GND -> OrangePi pin 9 ( GND ) DS3102 CLK -> OrangePi pin 3 ( TWI0_SDA ) DS3102 DAT -> OrangePi pin 5 ( TWI0_SCK ) I added i2c0 to overlays of /boot/armbianEnv.txt and rebooted. Now when I run "sudo i2cdetect -y 0", I get nothing: 0 1 2 3 4 5 6 7 8 9 a b c d e f 00: -- -- -- -- -- -- -- -- -- -- -- -- -- 10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 30: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 4…

Hi, I have been looking to download "Armbian_5.52_Olinuxino-a20_Debian_stretch_next_4.17.19.img". Torrent that I have is not seed, it been stuck for all day. Can anyone please provide me with downloadable link or please seed the torrent? Thank you Jedi