Allwinner sunxi

Hello! How to enable 1-Wire Dallas? I tried this: vi /boot/armbianEnv.txt ----------------------------------------------------- overlays=w1-gpio param_w1_pin=PA10 param_w1_pin_int_pullup=1 ----------------------------------------------------- Then I saw /sys/bus/w1/devices 00-400000000000 -> ../../../devices/w1_bus_master1/00-400000000000/ 00-800000000000 -> ../../../devices/w1_bus_master1/00-800000000000/ w1_bus_master1 -> ../../../devices/w1_bus_master1/ But there was not data. I tried this: vi /etc/modules ----------------------------------------------------- g_seri…

Hi there, I am trying to download the lime2 legacy image : https://www.armbian.com/olimex-lime-2/#kernels-archive But the link is dead (error 404). Any chance to get this back up? Or can I use another legacy image and just change the script.bin or is there other things to modify? Thanks Edit : I just found the image on olimex website : ftp://staging.olimex.com/Allwinner_Images/A20-OLinuXino/2.legacy_images_kernel_3.4.x/

i wanted to use my Banana Pi M1 for displaying multimedia content from websites like twitch.tv but firefox-esr and chromium crash when I try to load them. firefox opens its crash report box without a possibility to look at the related error messages. But the output of chromium can be viewed here: http://dpaste.com/37M0QNC It was installed from Armbian_5.65_Bananapi_Debian_stretch_next_4.14.78.img plus dist-upgrades. Iinitius

I'm trying to develop a kiosk system using an Orange Pi One (Based on Allwinner H3 - Mali400) running Armbian Xenial To do this I need to develop a full-screen GUI application (I don't have much experience in this area) I'm looking for a professional way to do this, Ive spent about a week trying to get Qt to cross-compile from my laptop but not getting much luck, Any ideas / advice welcome, Andy

Hello, I think having found a WiFi issue when connecting an Orange Pi zero device to an Access Point device based on the Atheros AR9280 chip. 1 Armbian_5.75_Orangepizero_Ubuntu_bionic_next_4.19.20 1.1 After installed the last Ubuntu Armbian image nmtui tool doesn't detect the ssid in the list of wifi network 1.2 after sudo apt-get update & upgrade & reboot (-> Armbian v5.75 / Unbuntu 18.04.2LTS / v4.19.25-sunxi) nmtui tool detect the ssid in the list of wifi network I can well connect to this ssid WiFi channel. But the Wifi cnx is disabled if the following case : The ethernet cable is no…

Hi When I run `cat /proc/cpuinfo`, the Features line shows the following features Features : fp asimd evtstrm aes pmull sha1 sha2 crc32 cpuid But doesn't the H5 support neon and vfpv4? Anyone know why they aren't shown? Thanks $ cat /proc/cpuinfo processor : 0 Processor : AArch64 Processor rev 4 (aarch64) Hardware : sun50iw1p1 BogoMIPS : 48.00 Features : fp asimd evtstrm aes pmull sha1 sha2 crc32 cpuid CPU implementer : 0x41 CPU architecture: 8 CPU variant : 0x0 CPU part : 0xd03 CPU revision : 4

Hi I have strange problem with my nano pi neo core 2. The device was working a few days then suddenly I lost my ssh connection. I used serial port to communication to see what happened and I get reply below. The last line it is a Error so I should reset my device. I did it several times and the result is the same. I'm not specialist but I supposed it is something wrong with eMMC memory because if I insert SD card with armbian it starts normally. Anyone have idea what was that, what happened. My nano pi shows week light of red LED. U-Boot SPL 2018.11-armbian (Feb 08 2019 - 11:05:25 +0100) DRAM: 1024 MiB …

hello Armbians, Since over an year I try to use this useless Board. Now i want too switch 3 Relays modules with the gpio system, after an udp command. I installed Wiring pi , gpio readall work gpio write 25 1 , works to the inputt get the value 1 gpio mode 25 out, does not work echo 36 > /sys/class/gpio/export echo out > /sys/class/gpio/gpio36/direction echo 101 > /sys/class/gpio/export echo out > /sys/class/gpio/gpio101/direction the input is without an error but with gpio readall nothing changes this code I wrote to use the gpio with python export38…

I am trying to get composite video fully working on an Orange Pi Zero Plus 2. I installed the legacy kernel image, and I've been able to turn on composite out, but I just get a blank screen on boot and there is no /dev/fb0. Is there anything else I have to do to enable the framebuffer. This is the (I believe) relevant portions of the script.fex file: [boot_disp] advert_disp = 0 auto_hpd = 1 output_type = 4 hdmi_channel = 0 hdmi_mode = 4 cvbs_channel = 1 cvbs_mode = 11 output_full = 1 hdmi_mode_check = 1 [disp_init] disp_init = 1 disp_mode = 1 screen0_output_type = 3 screen0_output_mode = 5 screen1_output_type = 2 s…

Hi, I just got a NanoPi Neo Plus2 for which I must prepare an image for our software. Basically I must have a working Ethernet-over-USB, Wifi and NIC. I started with your current Debian image compiled with uses Armbian v8.75 and Linux kernel v4.19.20. In this image Wifi works, but loading the g_ether module does not seem to work. I assume I need to patch the kernel to make this happen, which means I need to build my own images. So I created a Virtualbox environment as described in the documentation, and compiled an image with all the defaults (apart from a date-tag I add to the kernel name for identification). I installed the image to the eMMC and b…

Hi, I am currently testing an Orange Pi 3 with your nightly distributions (for instance Armbian_5.83.190424_Orangepi3_Ubuntu_bionic_dev_5.0.9), and they work fine but have some issues. The main issue is that the ethernet link status display does not really work. When I unplug my ethernet cable, the "Link detected" is alwayes 'yes" within ethtool. As I am trying to configure my board in bonding mode with an external wifi usb adapter (because the embedded wifi is not yet supported by armbian for Orange Pi 3), my bonding is not working because the link status on eth0 is always yes. I have also checked /sys/class/net/eth0/carrier and it is always "1" e…

Is it possible to add some gpio chip select for support more than one chip select on board ? Loooked on https://github.com/armbian/linux ... ers/spi/spi-sunxi.c I am not found any support of gpio here. Also here https://github.com/armbian/linux/blob/sun8i/drivers/spi/spi-sunxi.h we can see that only one chip select can be used: /* About CS */ #ifdef CONFIG_ARCH_SUN8IW1P1 #define SUNXI_CS_BITMAP(ch) (ch%2 == 0 ? 1 : 3) #define SUNXI_CS_NUM(ch) (ch%2 == 0 ? 1 : 2) #endif #ifdef CONFIG_ARCH_SUN9IW1P1 #define SUNXI_CS_BITMAP(ch) (ch == 3 ? 7 : 1) #define SUNXI_CS_NUM(ch) (ch == 3 ? 4 : 1) #endif #ifndef SUNXI_CS_BITMAP #defi…

Is there any other firmware for the AP6255 available, besides the one made available for Khadas VIM at https://github.com/khadas/android_hardware_amlogic_wifi/tree/Vim/bcm_ampak/config/6255/BT or the one for the Raspberry Pi 3+ available e.g. at https://github.com/OpenELEC/misc-firmware/blob/master/firmware/brcm/BCM43430A1.hcd which uses also the same chipset? I am trying to make Bluetooth working on an Orange Pi Lite2. So far I had no success loading the firmware by issuing root@orangepilite2:~# brcm_patchram_plus --patchram /lib/firmware/brcm/BCM43430A1.hcd --enable_hci --bd_addr 11:22:33:44:55:66 --no2bytes --tosleep 1000 /dev/tty…

OrangePi Zero has (according to specifications) 2Mb SPI flash. Sorry for my newbie question, but how is it possible to write there some file and read it later? Or at least some data (string)?

Hi, I'm a new user to SBC and is thinking of buy an orange pi pc 2. Since it has a Mali450 GPU and the manufacturer claims that this SBC support OpenGL, can I use that to play some open source games like 0.A.D on armbian? Is armbian have mali gpu drivers installed? Thanks.

Hi everyone, What I want to do is to use a DS18B20 through 1-Wire to read temperature on an OPi Zero. The sensor seems to be detected by the board (I see the file under /sys/bus/w1/devices/28-something), and then it disappears randomly after a reboot or a power cycle. (file goes away and obviously I can't get any readings). Then it starts working randomly again after an indefinite amount of reboots. I'm having this problem for a while now, and it's driving me absolutely crazy. This one here on the picture is the sensor I'm using. I have attached a 4.7K Ohm resistor between the VCC and Digital cables, and attache…

I use the Armbian_5.45_Orangepizeroplus2-h5_Debian_stretch_next_4.14.44.img. I want to use a sensor based on the spi protocol. In armbian-config i enable the spi ,the armbianEnv.txt like this: verbosity=1 console=both overlay_prefix=sun50i-h5 overlays=i2c0 i2c1 spdif-out spi-add-cs1 spi-jedec-nor spi-spidev uart1 uart2 usbhost2 usbhost3 rootdev=UUID=bb48b498-7bd1-4018-b77d-ba00fa61a33d rootfstype=ext4 param_uart1_rtscts=1 usbstoragequirks=0x2537:0x1066:u,0x2537:0x1068:u But in /dev on spi-dev root@H5:~# ls /dev/s shm/ snd/ stderr stdin stdout Is it because there is no code adaptation spi-dev? if not ,I want to try to transplant th…

Hi, I'm here to dig into low power consumption with allwinner H6 boards, I own an OrangePi one plus and I'm already doing some tests. With an H3 board and legacy kernel I would simply tweak fex file to turn off the unnecessary, and there is already good material around this argument. But with mainline kernel there is no documentation about lowering power consumption. I would really appreciate some hints on how to tweak down consumption for H6 boards and mainline kernel, probably editing DT overlay or some other config/patch files, and re-building? I already tweaked the simplest things like: -Using fast ethernet instead of gigabit -Lowering max CPU frequency (…

Hello guys, I am trying to use hardware flow control over the uart 1 of a nanopi neo core that I am using with a minishield. The GPIO pins of RX,TX,RTS and CTS of uart 1 based on this documentation (http://wiki.friendlyarm.com/wiki/index.php/Mini_Shield_for_NanoPi_NEO_Core/Core2) are G6,G7,G8 and G9. First of all I downloaded WiringNP in order to see the status of each GPIO. Before activating the rts cts on uart1, the figure "beforeActivatingRTSCTS" is the output of the command "gpio readall" . Then I added to the /boot/armbianEnv.txt the following overlay : param_uart1_rtscts=1 I rebooted the nanopi. After reboot, the figure "Aft…

I have read other thread regarding v4l2loopback kernel module installation. I got same problem like this message below ========================================= ------------------------------ Deleting module version: 0.10.0 completely from the DKMS tree. ------------------------------ Done. Unpacking v4l2loopback-dkms (0.10.0-1) over (0.10.0-1) ... Setting up v4l2loopback-dkms (0.10.0-1) ... Loading new v4l2loopback-0.10.0 DKMS files... dpkg: warning: version '3.4.113-sun8i 4.19.25' has bad syntax: invalid character in revision number Building for 4.19.20-sunxi64 Module build for kernel 4.19.20-sunxi64 was skipped since the kernel…

Upgraded kernel on existing working project and g_ether no longer working. So did fresh install on formatted card of Armbian_5.75_Orangepizeroplus2-h5_Ubuntu_bionic_next_4.19.20 If I do modprobe g_ether and then dmesg, I get the following udc-core: couldn't find an available UDC - added [g_ether] to list of pending drivers Is there something new in 4.19.20 that I must do? It used to work in older releases from 9 months ago or so...

Hi, after successfully booting the "Armbian_5.69_Orangepizeroplus2-h5_Ubuntu_bionic_next_4.19.13.img" image from a SD-card I decided to use "armbian-config" to copy/install Armbian to the onboard eMMC. The operation finished without an error but the devices now hangs/loops on boot. I've a TTL UART so here is the output: U-Boot SPL 2018.05-armbian (Jan 09 2019 - 22:59:13 +0100) DRAM: 512 MiB Trying to boot from MMC1 NOTICE: BL31: v2.0(debug):a9f803b NOTICE: BL31: Built : 20:16:26, Jan 7 2019 NOTICE: BL31: Detected Allwinner H5 SoC (1718) NOTICE: BL31: Found U-Boot DTB at 0x407ecc8, model: OrangePi Zero Plus2 INFO: ARM GICv2 driver initialized…

Hello, guys. I need help, don`t know what is going on. Yesterday two of my device`s (orange pi PC2) was rebooted by themselves. At different times, in separate areas. In log files I see fact of reboot but don`t see the reason. Temperature was in OK. Power adapter and micro SD card, which I use, in attachment. What should I pay attention? Can it be the reason is unattended upgrades or some armbian cron process? Environment: BOARD=orangepipc2 BOARD_NAME="Orange Pi PC2" BOARDFAMILY=sun50iw2 VERSION=5.67 LINUXFAMILY=sunxi64 BRANCH=next ARCH=arm64 IMAGE_TYPE=custom BOARD_TYPE=conf INITRD_ARCH=arm64 KERNEL_IM…

I soldered the two wires to my OPi Lite, running Armbian 5.75 stable. I was only able to listen noise. Already tested to configurate /etc/asound.conf and alsa volume. Can you help me? Thanks.

Hello, I'm buliding a music player for my old car using Orange Pi PC Plus. I would like to use external incoming logic levels (3.3V / 0V) to wake up the OPi from suspend state. Could you help me how to do that? Waking up using the HW button SW4 is working perfectly. I need to do this using external logic signal connected to PA11 / GPIO pin #5. I tried the following setting in fex editor: [gpio_power_key] key_used = 1 key_io = port:PA11<6><default><default><0> It doesn't work. I keep the pin on HIGH (3.3V) normally, and when I bring it to LOW state, OPi won't wake up. I tried also ch…

Orange Pi Zero NAS Expansion Board with SATA, mSATA using internal HUB USB with UASP capable chip, 2x USB and AV Port more info in this cnx-software post: http://www.cnx-software.com/2017/01/19/orange-pi-zero-nas-expansion-board-with-sata-usb-and-av-port-sells-for-10-shipped/ I want to share this new expansion board to read some interesting feedback here.

Hello I have an orange pi pc2 device with armbian-release on it. Yesterday I was faced with strange error: My orange pi pc2 was shut down, in auth log file I see "Power key pressed. Powering Off... System is powering down." But there is no power key and no one can press powering off by console or interface. Temperature in error moment was OK = 57 C How it can be, why orange go to powering off by him self? Spoiler armbian-release: BOARD=orangepipc2 BOARD_NAME="Orange Pi PC2" BOARDFAMILY=sun50iw2 VERSION=5.78 LINUXFAMILY=sunxi64 BRANCH=next ARCH=arm64 …

Try to use a DTS file to add bluetooth reset gpio control to rfkill, but `rfkill list` doesn't show "sunxi-bt". /dts-v1/; /plugin/; / { compatible = "allwinner,sun8i-h3"; fragment@0 { target = <&pio>; __overlay__ { bt_pwr_pin: bt_pwr_pin@0 { pins = "PG13"; function = "gpio_out"; }; }; }; fragment@1 { target-path = "/"; __overlay__ { rfkill_bt { compatible = "rfkill-gpio"; pinctrl-names = "default"; pinctrl-0 = <&bt_pwr_pin>; reset-gpios = <&pio 6 13 1&g…

Hello, I'm running a OPI Lite with debian jessie, All works fine until i have to reboot, and that happens quiet often while testing software. AFTER the boot i'm not able to reach the OPI via SSH, because the eth0 is activated ...and has a 169.x.x.x ip adress... On the OPI Lite i can ONLY discover WIFI and no eth0 connector...So i go into the "nmtui" tool and "disactivate" the eth0... Than i have access again via the wifi to my OPI lite. How can i completely disable the eth0, that only WIFI connects to my network? I didn't find about this behavior on the web, anyone else have that problem? Kind regards from Hans F4VSJ

I have a Orange PI PC Plus that isn't booting either from sd or emmc. I had really messed up some configuration, so I erased emmc. After I erased EMMC, I started to get this boot screen. https://photos.app.goo.gl/EbJX43eSATyqTEau8 If I insert a sd card in with the latest Armbian, I get no boot screen, or activity at all. In fact, even if I format the card, and insert it into the OP+ it gets no boot activity. It is only after that I remove the card that it can then boot from usb flash. I ended up writing the latest orangepiplus image to a usb flash drive, and am able to get it to boot via a flash drive. I did backup my microsd install a …

Hello, I would like to ask your help with the following problem. I'm able to put my Orange Pi PC Plus to suspend state using this command: echo -n mem>/sys/power/state When I wake it up using the SW4 pushbutton it resumes operation properly. I would like to automatically execute my script every time the system resumes from suspend state. I found two different methods, I've spent several hours trying them and non of them seems to be working with Orange Pi PC Plus. First method: using /lib/systemd/system-sleep Second method: using /etc/pm/sleep.d It seems my system does not execute the scripts confi…

It is possible to drag backlight control slider to far left position and this completely dims the screen's backlight. This might cause a lot of trouble, if backlight levels get saved by systemd service, as it will persist across reboots and will require you to shine a flashlight on a screen to actually see something and turn backlight back on.

Hello, i try to move it from SD to eMMC on a Orange Pi Zero +2 H5, but without success. Shouldn't be two partion created on eMMC by the nand-sata-install script ? root@orangepizeroplus2:~# fdisk -l /dev/mmcblk2 Disk /dev/mmcblk2: 7.3 GiB, 7818182656 bytes, 15269888 sectors Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disklabel type: dos Disk identifier: 0xe8c6ce8d Device Boot Start End Sectors Size Id Type /dev/mmcblk2p1 8192 15117183 15108992 7.2G 83 Linux Old UUID: /dev/mmcblk0p1 SD UUID: UUID=85ffa85e-4784-4cfd-93bb-db6f93f8e…

I've got an Orange Pi PC2, and I'm running some pretty CPU intensive tasks on it. However, I'm running into a situation where the processor is overheating and shutting down. I've got a bunch of OPiZero's, and on those I'm used to the kernel automatically throttling the CPU frequency down and/or shutting off cores in response to rising CPU temps -- but I'm not seeing that happen on the PC2 -- it just stays at max CPU speed until it overheats and shuts down. Is there a way to enable that same behavior on the PC2? (I'd rather it throttle down the CPU frequency instead of overheat...)

Guys, purchased shortly my first Bananapi M1. I installed without problems Armbian to a SD Card and now in second step i would like to connect a 1TB Western Digital 2,5" SATA HDD. But which connection cable do i have to use with the Banana Pi? Can someone please post a link url if allowed or let me know? Thanks in advance!

Is it possible to install a desktop Enviroment on the Orange Pi One Plus without any problems? Whenever I use the Armbian config minimal desktop option, the Orange Pi stays on a red LED. It says it cannot install simpleFB, and it just sits at the starting kernel screen.

This has been replaced by: User Space IO get more details on this thread. Well, it's time to say goodbye to sysfs and hello to libgpiod! @zador.blood.stained pointed me in the right direction, but you need to do one little hack I'll explain below involving compiler_types.h. I tested this on a NanoPi Duo, but it should work on any mainline Armbian release (and other distros as well) as long as the kernel is >= 4.8. Try ls /dev/gpiochip* and see if anything is listed. If so, then proceed. I'm continuing work on my Github site https://github.com/sgjava/libgpiod-extra, so please report any issues there. There is an Armbian install script t…

hi how can i enable the tv out in orange pi PC+, I need to do a kiosk mode thanks

INFOS: Armbian Bionic mainline kernel 4.19.20 System: OrangePi Pc Monitor, full HD (1920*1080), over HDMI. SOLUTION, ROTATE SCREEN: My rotation Settings that i try: 1. xrandr (not permanently, only for this session) 2. echo n > /sys/class/graphics/fbcon/rotate_all n=0,1,2,3 (permanently solution) See: http://linux-sunxi.org/Display <-Point:Rotation PROBLEM: Screen rotation problem: On every boot the rotation is correctly applied BUT: Turn Monitor off an then on again, the rotation is NOT applied. PROBLEM SINCE : Quarterly update cycle, until november 2018 everything works fine and i did not have thi…

Hello, I'm trying to read temperature from DHT22 on armbian using OrangePi's WiringPi library. The moment I call digitalWrite the whole system freezes. Previously I had raspbian and it used to work just fine. Am I missing something? Should I do some configuration maybe? Any help is appreciated. Thank you

Greetings, can the NAS HAT for the Zero work on the Zero Plus2 H5? I have the Zero HAT, which connects to the Plus2 board, but when I connect a usb keyboard, it does not power it. Although a usb mouse lights up. I can't test the mouse fully because I'm using ubuntu server on the Plus2 which has no GUI. So again, is the problem that the Plus NAS HAT does not work on the Plus2? I see that there is a NAS HAT for the Plus2 with the same connectors that the Plus HAT has but it's smaller. Thanks in advance iomari

considering to buy orange pi 3 with new H6 cpu, usb3.0 port and onboard emmc, but everyone has been complaining official images, just wondering if orange pi 3 will be supported soon.

Hi , there I am trying to write a program which will detect the presence of SD Card in Nano Pi M1 plus device. There are many ways to do this either by doing fdisk -l or looking into /dev/mmcblk* . But I want to keep running it in a loop and doing fdisk -l and grep doesn't seems an appropriate way. Can the insertion or removal of SD cards be checked via Hardware Interrupts? Plz. help me I am a newbie. Thank in advance.

Hi , there I have RT kernel on my OrangePi Zero now. Linux orangepizero 4.14.8-rt9-sunxi #1 SMP PREEMPT RT Sat Jan 6 14:36:31 CET 2018 armv7l armv7l armv7l GNU/Linux Guru, please, HELP me to reconfigure it to using MIDI + Pure Data!!! ALSA is fully installed. But there's a problem: root@orangepizero:~# aconnect -i ALSA lib seq_hw.c:466:(snd_seq_hw_open) open /dev/snd/seq failed: No such file or directory can't open sequencer Thank in advance.

I'm trying to check if UART on my Orange PI is working. I've enabled UART via armbian-config and rebooted OPi. root@orangepipc:~# dmesg|grep tty [ 0.000000] Kernel command line: root=UUID=e5185d19-ff08-47bb-8673-1779ef917d92 rootwait rootfstype=ext4 console=ttyS0,115200 console=tty1 hdmi.audio=EDID:0 disp.screen0_output_mode=1920x1080p60 panic=10 consoleblank=0 loglevel=1 ubootpart=530c2b83-01 ubootsource=mmc usb-storage.quirks=0x2537:0x1066:u,0x2537:0x1068:u sunxi_ve_mem_reserve=0 sunxi_g2d_mem_reserve=0 sunxi_fb_mem_reserve=16 cgroup_enable=memory swapaccount=1 [ 0.000189] console [tty1] enabled [ 1.975487] console [ttyS0] disabled [ 1.995…

please enable green led Banana-pi M1 Armbian 5.75

I have changed to 1080p and its almost stable but pull up any window that has maybe moderate workload to say heavy such a chromium the screen starts bouncing around. Think you know what I mean by bouncy, stuttery flashy. I thought that would just be fbturbo drivers and just the fex script but nope and a bit stuck. There is an image for Xenial as using the legacy version on the OrangePi site that is rock solid @ 1080p so it must be fixable but not sure what. Jan 2019 of xenial. I ran into some permission errors with NodeJS & PM2 so thought I would give Armbian another go as first image I tried was the latest less stable Bionic/Stretch which also at 1080p are …

I use a Beelink X2 Android TV box with Armbian Stretch mainline kernel 4.19.y Image on a SD Card. If I plug in my SD Card and then the power supply, the LED is purple and after some seconds blue. No picture over hdmi but the num-lock on the keyboard works. The box also don't get an IP over DHCP. No matter how long (1h+) I wait, nothing happens... When I plug in the power supply without the SD Card, the LED is red. The normal standby mode of the box. I can now plug in the SD Card and then power the system on. The LED switches to purple and after sone seconds to blue and Armbian is running fine, no problems. If the system reboots it will ru…

Hello. I would like to download the iso of the Orange pi One Plus with Kernel 4.19. But when i click on the link the image that i download is whit Kernel 4.18. Can you help me?. Regards.

hi ( armbian stretch over orangepiPC ) i try to use OPI 5MP Camera OV5640 - Auto zoom with wide-angle lens for Orange Pi PC /Pi One/PC Plus/Plus2e However , video0 device doesnt appear on /dev/ folder. what can i do ? thanks

OrangePI PC Armbian_5.75_Orangepipc_Debian_stretch_next_4.19.20.img I'm trying to install openCV 4.0 from the following link: https://www.alatortsev.com/2018/11/21/installing-opencv-4-0-on-raspberry-pi-3-b/ This complete command: https://pastebin.com/JPuTprVf Not work, but i have not errors during compiling. The problem is: 1) apt-get install libjasper-dev libpng12-dev (Not Found) 2) But I seem to remember that even with Raspberry and raspbian there was the same error. pip3 install numpy scipy Collecting numpy Downloading https://files.pythonhosted.org/packages/cf/8d/6345b4f3…

Using Firefox Send, expires after 7 days / 100 downloads. My own build - works nicely for me & installs to eMMC. 203.6 MB compressed. Use xz to decompress. Filename: Armbian_5.77_Orangepi3_Ubuntu_bionic_dev_5.0.4.img.xz https://send.firefox.com/download/e2961cb805fba655/#rquCw2FsaPvGQpVviByLHA

Hi I would like to ask you how to use MAX485 module to communicate 2 NanoPi Neo Core 2. I would like to use UART0 (it is GPIO4 and 5). I connection my module similar to this picture: https://www.google.com/search?q=max+485&client=ubuntu&hs=ern&channel=fs&tbm=isch&source=iu&ictx=1&fir=FN56jmGIPP4yJM%3A%2CBP52RgiAvdjG4M%2C_&vet=1&usg=AI4_-kQK1TQEVXzv7J4_kJ8nEnLbgH0X5w&sa=X&ved=2ahUKEwjxy57J2oHhAhVpsosKHZTnCnAQ9QEwBHoECAUQDA#imgrc=Jkfuqm9JL_mJXM:&vet=1 I wrote python3 code send.py : import RPi.GPIO as GPIO import time import serial import os EN_485 = 24 GPIO.setmode(GPIO.BOARD) GPIO.setup(EN_485,GPIO.OU…

Hi! I've recently bought a nanopi NEO2 which features an Allwinner H5. On FriendlyArm website (and on Allwinner's too) it is stated that the H5 is clocked 1.5Ghz. I need to perform some heavy job and and noticed that the cpu frequency hits, at full power, only 1Ghz. I checked using cpufreq-info and I got: driver: cpufreq-dt CPUs which run at the same hardware frequency: 0 1 2 3 CPUs which need to have their frequency coordinated by software: 0 1 2 3 maximum transition latency: 244 us. hardware limits: 120 MHz - 1.01 GHz available frequency steps: 120 MHz, 240 MHz, 312 MHz, 480 MHz, 624 MHz, 816 MHz, 1.01 GHz available cpufreq governors: conservative, ondemand, users…

Not sure if this is the right forum, or it should be under board bringup.... I have a few Duo2 boards running with the FriendlyElec image, but my OrangePi boards all run Armbian... I do prefer Armbian :-) . Playing around a little I can get the Nanopi Neo Air image running, but not with the wired ethernet. (My boards reside on my own design with a ethernet jack, which works perfect with the FE/FA image) I have the Armbian build environment running in a VM, and can compile my own kernel etc. ButI need a few pointers how to get the right board config in the image/kernel.... Or... Does someone already have a build setup running for the Duo2, who is willing to …

I just checked the mali blob: mali450r5p001rel0linux1fbdevarm64v8a (fbdev) and this blob is working on the legacy kernel with the proper patches. Nevertheless we may have some stability issues at the current voltage/frequence; Indeed gl-mark2-es-fb crashes around the refract test on my board.

After along time I downloaded a new armbian image, after doing apt update/upgrade for the last year or so. I was quite surprised to see that the pcduino3nano is now deprecated, while other A20 boards are still supported. What was the exact reason that the pcduino3nano was dropped from support? If I keep using the deprecated OS, can I fully use apt update/upgrade for all user stuff? What would happen to all kernel and u-boot update packages? Is the latest armbian for the pcduino3nano automatically disabling those updates, or do I need to do something manually? *should* I block kernel & u-boot updates? thanks, Michale Jasson

I have Orange Pi Zero Plus (H5 CPU) and Huawei E303 HiLink USB modem. The modem doesn't have any enabled interfaces such as CD-ROM, SD CARD, and other unusuable stuff except RNDIS interface (I want to believe that AT commands really disables it). When Armbian is started, connected to USB modes normally starts and system has new network interface and all works fine. When I try to power on board with connected modem, Armbian doesn't start, onboard LED doesn't light, modem starts normally and indicate normal link (blue LED lights). Here is log when modem hot-plugged: Spoiler Mar 18 04:17:04 localhost kernel: [ 9.033246] usb 3-1: new high-speed…

Hi, Being a novice I am having trouble enabling the Wi-Fi hotspot. I am currently connected through my LAN. My Pi is a Pi Zero Plus with a Allwinner H5 SoC Quadcore. Things I have tried: Followed this tutorial : https://forum.armbian.com/topic/7781-guide-orage-pi-zero-wifi-ap-hotspot/ Tried update and upgrade to recent beta models Nothing seems to display the hotspot option. Little help on that or any suggestion?

I'm trying to run an executable on an OrangePi Prime. The message is: -bash: <filename>: No such file or directory The output of the file command on the executable is: <filename>: ELF 32-bit LSB executable, ARM, EABI5 version 1 (GNU/Linux), dynamically linked, interpreter /lib/ld-linux-armhf.so.3, for GNU/Linux 2.6.32, BuildID[sha1]=xxx, not stripped The app runs fine on OrangePi One, OrangePi Zero and Raspberry Pi.

Hi, Recently I have installed "Armbian_5.75_Orangepizero_Debian_stretch_next_4.19.20" on my OrangePi Zero . I configured both Ethernet and wifi connection but I had a problem with the wifi, my board does have an IP address but I can not connect through ssh nor pinging that IP. The connection is Ok and I can get access to internet but I can not ping from any other devices on the network (error Destination host unreachable), But I noticed that if I ping (from the orangepi board ) the host machine then I will be able to connect through ssh to that IP. I dont know if its a problem with arp last thing that I tried was to disable the network manager but I still have the…

Hello! Anybody help me, please.. How to set up HDMI to connect monitor? How to make it reboot normally on "shutdown -r now"? Kind regards, Ellad

Ethernet was working fine for me, up until I rebooted the board. The LEDs on the ethernet port blink briefly during boot, but once booted they are off, and the board does not have an IP address. Via serial console I undid the change I made prior to the fateful reboot (adding 'overlays=uart1' to '/boot/armbianEnv.txt') and rebooted again, but to no avail. Having searched for the issue, I also confirmed that my power supply is sufficient; running 'stress -c 2 -m 2', and measuring across pins 2 (5V) and 6 (GND) of the 40-pin header, I get 5.05V. As I don't have a network connection, I did not run 'sudo armbianmonitor -u', but I gathered the following …

I'm trying to get the Orange Pi One Plus' OTG port to function in "otg" or "peripheral" mode. I've modified the device tree configuration to change the "dr_mode" from "host" to "peripheral". This works as long as the Orange Pi One Plus and the device are separated by a hub. If directly connected via an OTG cable/adapter the device instead charges from the Orange Pi One Plus. I assume this would be due to the OTG port acting as a power source rather than a power sink. However, after experimenting I've been unable to find a device tree configuration change the role of the vbus. Does anybody have any advice?

Hi all, i have orangepione uname -a Linux orangepione 4.19.20-sunxi #5.75 SMP Sat Feb 9 19:02:47 CET 2019 armv7l GNU/Linux And i try create hid gadget keyboard. I find topics about raspi zero, orange pi zero, and i use config from where. So i can create keyboard, and when i connect it to linux or windows machine i can see symbols, but when i try send key to macbook bios i have no luck. Did anybody know how to get work with macbook? /etc/modules dwc2 libcomposite /etc/rc.local /usr/bin/isticktoit_usb exit 0 alex@orangepione:~$ cat /usr/bin/isticktoit_usb #!/bin/bash sleep 10 # Create gadget mkdir /sys/kernel/config/usb_gadget…

Hello, I am using nanoPi Neo Core with mini shield nanoPi NEO CORE/CORE2. The OS that i am using is Armbian stretch downloaded from this link : https://www.armbian.com/nanopi-neo/ The armbian image that I am using is : Armbian_5.65_Nanopineo_Debian_stretch_next_4.14.78 What I am trying to do is enable hotspot. I followed the following tutoriel that is already published on this forum : When I try to start the hotspot using armbian-config, network manager stop working. I tried to do a reboot but it didn't work. And network manager doesn't start again. the cause of this error is : NetworkManager[879]: Failed to read confi…

orange pi one synaptic package manager I installed the synaptic package manager on Armbian Xenial. If I input something to search for one core goes 100%. The search is so slow I have not let it finish it. Is it a bug? My raspberry pi 0 is able to do a search fast. Thank you.

Hello, I've been using an OrangePi PC with legacy distribution for a long time as a mini-server, it worked Ok except for some seemingly random freeze. I'm using it with an unsupported monitor size (1600x1200), so I had a modded version, and I never updated the system files to avoid having to recompile. I'd like to update Armbian to the mainline kernel version, but I want to keep all my settings/additions/installed programs, so I'd prefer to NOT do a complete re-install. Is there a way to do an upgrade without losing everything?? If not, how can I keep track of all the modifications currently installed so I can re-install them? TIA

My docker build dev 5.0.y is not booting from sd card. U-Boot SPL 2019.01-armbian (Mar 16 2019 - 05:27:40 +0000) DRAM:This DRAM setup is currently not supported. resetting ...

I have noticed a very weird problem: connection works for some time (several hours or sometimes days) and then stops. Once it stopped working (connection between my mobile app and OrangePi) I have checked on the board: - ping 8.8.8.8 - OK - ping (router IP) - OK - ping (broadcast ) - FAILED - ping (PC or any other device connected to the network) - FAILED In all cases, Wireshark captures the ping requests. Once I tried to ping OrangePi board from my PC, I see in&out ping packet on OPI board by Wireshark. It seems like some lower layer or router (the same on two different) blocks the outgoing connection. Ideas? (WiFi power management off, no fir…

Hi, I have a Cubietruck and install Armbian_5.38_Cubietruck_Debian_stretch_next_4.14.14.img from https://www.armbian.com/cubietruck/. Copied with Etcher the unpacked .img-File to a SanDisk Ultra 32GB micro SD HC1. But no system comes up Last message U-Boot 2017,14-armbian (Jan 24 2018 ... . . Loading Device Tree to 49ab5000, end 49b29fff ... OK Starting Kernel No blinking cursour on top of the left side. Nothing go's on! System with Armbian_5.37_Cubieboard2_Debian_stretch_next_4.14.14.img works, but no network with armbian-config, neither static nor DHCP, can configure. (dnsmasq.service not found) LAN-Cable ist pluged. …

Hi all, I wrote this dts to enable a high PG12 pin int the Bananapi M2P H3 can it be okay? /dts-v1/; /plugin/; / { compatible = "allwinner,sun8i-h3"; fragment@0 { target = <&pio>; __overlay__ { bt_pins:bt_pins { allwinner,pins = "PG12"; allwinner,function = "gpio_out"; }; }; }; fragment@1 { target-path = "/"; __overlay__ { bt: bt { compatible = "gpio-bt"; gpios = <&pio 6 12 1>; }; }; }; };

Hey all, I understand these things are in active development at the moment. I was attempting to use the usb 3.0 socket on the lite 2 with stretch, except it did not respond at all - looking at dmesg shows the following error: [ 1.806055] sun4i-usb-phy 5100400.phy: Couldn't get regulator usb0_vbus... Deferring probe [ 1.806320] sun50i-usb3-phy 5210000.phy: failed to get phy clock which from my limited experience with linux kernel seems to indicate that the device tree config may be incorrect for the board - as most searching for these errors show the code added as part of updates to get the pine64 board's usb 3.0 stack working. USB 2.0 sock…

Hello I have installed the iso in debian 8 (jessie). I would like to update to debian 9 but on armbian-config, i don't find the menu NEXT on submenu system Where i can find the latest kernel for update manually? my card is an orange pi zero Thanks for all and sorry for my bad english (french) David

hi there, Recently there was an update for all Olimex boards with A20. Now we have one image for all the boards and it includes mainline kernel which is cool. I checked here and took the image from here. Now after a while I got strange error and wanted to check with you if you can share an opinion what this could be: [32673.051479] Unable to handle kernel NULL pointer dereference at virtual address 0000 [32673.060027] pgd = 9d6652ac [32673.062884] [00000000] *pgd=00000000 [32673.066666] Internal error: Oops: 5 [#1] SMP THUMB2 [32673.071795] Modules linked in: joydev input_leds ipt_MASQUERADE nf_conntrack_netlink iptable_nat nf_nat_ipv4 xt_addrt…

After the automatic update to kernel 4.19.17 the CPU temperature is wrong and much higher, also in dmesg there are these errors Spoiler dmesg | grep thermal [ 6.428747] thermal thermal_zone1: binding zone cpu-thermal with cdev thermal-cpufreq-0 failed:-22 [ 6.841480] thermal thermal_zone0: failed to read out thermal zone (-110) [ 6.841546] OF: /thermal-zones/cpu-thermal: arguments longer than property [ 6.841560] thermal thermal_zone2: failed to read out thermal zone (-110) [ 7.877181] thermal thermal_zone0: failed to read out thermal zone (-110) [ 8.050346] thermal thermal_zone2: failed to read out thermal zone…

Hello, I’ve just tried to boot the theoretically universal Armbian_5.72.1_Olinuxino-a20_Debian_stretch_next_4.19.17 image (taken from ftp://staging.olimex.com/Allwinner_Images/A20-OLinuXino/1.latest_mainline_images/stretch/images/) on my A20-SOM device, but with no success. The following output is displayed: **File not found /boot/dtb/ ** libfdt fdt_check_header(): FDT_ERR_BADMAGIC No FDT memory address configured. Please configure the FDT address via “fdt addr ” command. Aborting! ** File not found /boot/dtb/overlay/sun7i-a20-fixup.scr ** … ERROR: Did not find a cmdline Flattened Device Tree Could not find a valid device tree SCRIPT FAILED: …

Is it possible to add this camera: VGA OV7670 CMOS camera module - 0.3 Megapixel lens / 640X480 to the Orange Pi PC2 H5 64bit? (all info related to my Orange Pi are stored here http://ix.io/1BW3) The ribbon cable fits the socket (although pin numbering are reversed), but I have not found any relevant info googling the internet. I'm wondering if anybody experimented already this coupling. Thank you.

I am trying to set up Wifi AP on OrangePi Zero board. Basically, I install and configure hostapd and dnsmasq and create a script, which does the following (it is run as sudo): nmcli radio wifi off rfkill unblock wlan ifconfig wlan0 172.16.0.1 netmask 255.255.255.0 broadcast 172.16.1.255 service dnsmasq restart /usr/sbin/hostapd /etc/hostapd/hostapd.conf This is the /etc/dnsmasq.conf: port=53 domain-needed bogus-priv resolv-file=/etc/dnsmasq/resolv.conf interface=wlan0 listen-address=172.16.0.1 bind-interfaces addn-hosts=/etc/dnsmasq/hosts.conf dhcp-range=172.16.0.50,172.16.0.150,12h dhcp-leasefile=/var/lib/misc/dnsmasq.…

These boards are well suited to routing/network traffic control functionality. Currently the kernel has been compiled with Traffic Control stuff disabled, which makes it impossible to perform traffic shaping on stock Armbian kernel. I'm busy recompiling the kernel as a temporary solution, but I will really appreciate it if the kernel build maintainer can please change the traffic control options from DISABLED to MODULE (at least)? I have a bunch of Armbian boards but I'm testing with NanoPi Neo 2 right now. --- I'll let you know the size of the modules once I've finished compiling.

Hello Could You advice it` s possible to run emulator for SNES game on armbian at OPI WIN. I`m already run NES game but try to instal other SNES emulator don`t work Thanks in advance.

Dear Armbian friends, I have question about add DS18B20 temp sensor at RPi-Monitor (web based interface). Can somebody paste working config of this sensor? On internet I found many tutorials but with DHT sensors. On this page (Xavier is an author of RPi-Monitor I think) is described DS18B20 but in status "Working in progress". I tried this but without luck. https://xavierberger.github.io/RPi-Monitor-docs/32_sensors.html?highlight=ds18b20 Cheers, Lucas

Hi, My Orange Pi Prime stopped working within an hour of use. Setup: Orange Pi Prime v1.0 (201811) Official PSU, rated 5V 3A Official plastic case (without heatsinks) Display attached using HDMI Network attached 100mA keyboard attached SD Card: Sandisk 64G Ultra SD Card tested "The real thing" SD Card formatted to factory defaults Images (Armbian Stretch next for Orange Pi Prime) checked for authenticity and integrity SD flashed using Etcher First boot succesful Installed tmux Set up SSH using armbian-config and used it to connect Installed docker using armbian-config successfull…

As title says, how to install image on eMMC on this board? My board works fine on TF card with every image FriendlyElec, DietPi and you here provide, but i haven't managed to make it boot from eMMC. On official Wiki there are some misleading. For Ubuntu they say to select image from eflasher and burn it on TF card. Eflasher folder has two images. Which one? Although i tried both. Anyway, if i burn boot image on TF card, should eMMC stays empty or to burn on it, say, root image? Or to burn root image on TF? I had a few attempts but no luck. Obviously. On Android, they say to insert TF card into PC and burn image on eMMC? LOL. Again should i burn any…

Hi all, its probably something simple but here is what i am struggling with: airmon-ng start <interface name> iwconfig wlan1mon channel 13 aireplay-ng --test wlan1mon ifconfig wlan0 up -> wlan0 is configured and connected to the access point packets are injected and can be observed with another machine ifconfig wlan0 down / or not associated with network packets are not injected and cannot be observed aireplay-ng or raw socket directly shows no errors initial toughs somewhere there is a switch to enable/disable radio at low level nothing obvious in strace tried with and without network manager…

Hi. I would like to ask you how to add and read temperature and humidity from sensor DHT11 on Nano Pi Neo Core 2 with armbian. I want to use PA13 pin (CS form SPI1) I try to enable overlay: sudo modprobe dht11 cat /sys/bus/iio/devices/iio:device0/in_temp_sclae return : -119 When I try add dht11 to overlay in /boot/armbianEnv.txt this module after reboot is still disable. Any suggestions?

Good day! I've had the Nanopi Neo2 v1.0 for sometime now, used for mostly for NAS solution. the v1.0 is the one being carried by my supplier here. No v1.1 yet Lately I installed armbian monitor to monitor system resources. Then I stumbled upon the min and max frequency when I checked using # cpufreq-info -p 408000 816000 ondemand I've read on some internet writeups that one can set the max frequency to 1008000 tried editing the cpufrequtils scaling_max_freq scaling_available_frequencies scaling_setspeed I was able to lower the minimum frequency to 120000 using the following entry…

Hi. Recently i upgraded to Armbian_5.65_Orangepilite_Debian_stretch_next_4.14.78 and i have two problems. I can not read the thermal zones properly with neither of those: cat /sys/class/thermal/thermal_zone0/temp cat /sys/devices/virtual/thermal/thermal_zone0/temp cat /etc/armbianmonitor/datasources/soctemp because i have results like "30371". But when the system starts the correct temperature is displayed: Welcome to ARMBIAN 5.73 stable Debian GNU/Linux 9 (stretch) 4.19.20-sunxi System load: 0.07 0.15 0.10 Up time: 10 min Memory usage: 29 % of 493MB IP: 192.168.1.46 CPU temp: 33°C Usage of /: 10% of 15G and with armbianmonit…

hello everyone my Orange Pi A20 does not detect any USB device with the current versions of Stretch or Bionic, but works fine with Wheezy I had try with a printer, a scanner, or USB stick. When something is connected, nothing appears in dmesg or lsusb. Yes...yes...I've been reading the troubleshooting FAQs and Google it for an answer. Change power supply and SD card, etc. But a printer or scanner doesn't consume too much power from the USB, does it? in a last effort I went back to the old Debian Wheezy (downloaded from orangepi.org) and everything works fine. Any help with that? Could it be a kernel parameter o…

I haven't solved the problem of spdif-out on mainline kernel. But, on legacy kernel 3.4.112, spdif-out works. but, has a limitation upt 48khz? doesn't work of 88khz, 96khz, 176khz on my Nanopi Neo Air 1.0. Is it correct to have a limitation. Thanks in advance.

Orange pi one refuse to add spi to /dev/. It's 5.73 armbian kernel 4.19.20-sunxi. I've activated spi dev from armbian-config but no device after reboot. Gpio and i2c work great . Anyone had problem like this? Послато са Redmi Note 6 Pro уз помоћ Тапатока

Hi everyone. I have nano pi neo core 2 with ARMBIAN 5.75 stable Debian GNU/Linux 9 (stretch) 4.19.20-sunxi64. I try to change i2c speed from 100 000 to 400 000. I try: sudo fdtput -t i sun50i-h5-nanopi-neo-core2.dtb i2c0 clock-frequency 400000 Error at 'i2c0': FDT_ERR_BADPATH Anyone have idea how to change i2c speed?

Hello! I have armbian jessie on cubietruck. I am using it with asterisk software. After 4 or 6 days its hanging. I was change hdd to ssd disk, decrease temperature to 44C, and problem is not solved. Please help me find the way.. i have no battery, and battery on board is not 3v - 1,7v now.

I'm not sure I even want BakeBit. I'm trying to use the GPIO in my NanoPi Neo2. Specifically I want to read a digital I/O pin on/off state. And if possible I'd like to read an analog voltage from the H5's built in ADC. Now that I've looked deeper into BakeBit, it seems like the entire purpose of BakeBit is to do GPIO with an Arduino, and read the information remotely on a RbPi/NanoPi or whatever ON the Arduino's GPIO pins. If that is really what BakeBit is, then BakeBit doesn't interest me. The H5 already has GPIO and an ADC. We just need to get that working. For interest's sake, here is the progress I made with BakeBit. ADC Python example in Bakebit h…

Requirements: https://github.com/lthiery/SPI-Py https://github.com/mxgxw/MFRC522-python (for Raspberry Pi) https://github.com/kwanxian/OrangePiPC/tree/master/SPI/RC522 (for Orange Pi PC) sudo armbian-config System --> Hardware --> select "spi-spidev" --> Confirm --> reboot when reboot finish: sudo vim /boot/armbianEnv.txt under "overlays=spi-spidev",add this: "param_spidev_spi_bus=0" save & reboot again. then you can see spi enable in "/dev/spidev0.0". cd ./SPI_Python sudo python3 setup.py install cd ../RC522 sudo python3 Read.py you can test IC card like this: …

I have banana pi m2+ with ampak AP6212. Install Armbian 5.75 with Linux kernel 4.19.20 Driver on wi-fi brcmfmac. Wi-Fi access point actived via armbian-config. ifconfig: eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet 192.168.1.20 netmask 255.255.255.0 broadcast 192.168.1.255 inet6 fe80::81:fcff:fe71:785b prefixlen 64 scopeid 0x20<link> ether 02:81:fc:71:78:5b txqueuelen 1000 (Ethernet) RX packets 76186 bytes 46503714 (46.5 MB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 12755 bytes 2691167 (2.6 MB) TX errors 0 dropped 0 overruns…

Hi, How to enable TV-OUT on Orange Pi Zero in Armbian mainline ( 4.19.20 - 5.75)??? I saw a post from one year ago with a patch that adds an overlay called tve, but is there a more integrated solution by now? Thank you

Hi all, I'm starting with armbian and Banana pi m2p card. I entered image 4.19.21-sunxi, I can not make BT work. with armbian-config I have enabled the BT, next systemctl start bluetooth. with systemctl status bluetooth: Feb 18 18:01:30 bananapim2plus systemd[1]: Starting Bluetooth service... Feb 18 18:01:30 bananapim2plus bluetoothd[1779]: Bluetooth daemon 5.48 Feb 18 18:01:30 bananapim2plus bluetoothd[1779]: Starting SDP server Feb 18 18:01:30 bananapim2plus systemd[1]: Started Bluetooth service. Feb 18 18:01:30 bananapim2plus bluetoothd[1779]: Bluetooth management interface and root@bananapim2plus:~# bluetoothctl Agent registered [bluetooth]…

Hi! SBC : OrangePi Zero 2 + (H3) Distro: ARMBIAN 5.76 stable Debian GNU/Linux 9 (stretch) 4.19.21-sunxi First when I ran : sudo armbianmonitor -u reply is : System diagnosis information will now be uploaded to Please post the URL in the forum where you've been asked for. Now my problem: I am using Armbian for quite a time and it is wonderful. I am trying to connect a waveshare clone 7 inch lcd with a 800x480 resolution, as the EDID information which lcd provides is broken, I have to force EDID firmware for 800x480 which is already available in the /lib/firmware/edid directory , previously it was working in mainline kern…