Allwinner sunxi

trying to monitor a button press on GPIO19 which has an offset 40, but getting the error in the title. Switched between kernels but made no difference. http://ix.io/4cFr After switching the kernel http://ix.io/4cGd Not sure if this is related, but might help with the troubleshooting https://archlinuxarm.org/forum/viewtopic.php?f=65&t=14423

Hello. I need to set a low level on a gpio pin PA6 on boot. I'm trying to do this through the device tree: /dts-v1/; /plugin/; / { compatible = "allwinner,sun8i-h3"; fragment@0 { target = <&pio>; __overlay__ { pinctrl-0 = <&pull_pins>; pull_pins:pull_pins { pins = "PA6"; function = "gpio_out"; bias-disable; output-low; }; }; }; }; I need to set PA6 to low. After boot, I see my overlay in device tree, but the level on the PA6 is still high. I can easily control the level through libgpiod (gpioset gpiochip0 6=1 or gpioset gpiochip0 6=0), it works. But I ca…

/proc/cpuinfo does not list serial number How do I read the chip serial number?

Hi! ill try install homeassistant on orange pi zero 512MB, but i have a problem. i have download Armbian_22.08_Jammy_rolling_Sid server_Kernel_5.19.y_359M_Sep.24,2022 https://redirect.armbian.com/region/EU/orangepizero/Sid_edge and installed armbian like https://www.albertogonzalez.net/how-to-install-armbian-debian-on-an-orange-pi-zero i dont know is it correct or not, i think Kernel_5.19 is better than 5.15? / _ \| _ \(_) |__ /___ _ __ ___ | | | | |_) | | / // _ \ '__/ _ \ | |_| | __/| | / /| __/ | | (_) | \___/|_| |_| /____\___|_| \___/ Welcome to Armbian 22.08.2 Sid with Linux 5.19.10-sunxi No end-user support: unsupported (sid) usersp…

Hi all. I installed the latest Armbian on a OPI PC Plus that I have. I want remote desktop and console Desktop. As soon as I install tightvnc the console desktop wont login anymore. I get a pasword box and as soon as I enter it the screen will go black and then reset back to the login box. How do I set it up so I can have remote desktop and console desktop. I tried to install remote desktop for Windows RDP also and that also does not work.

Hello everyone, I am using Orange Pi Zero LTS 512MB (H3 Cpu) hardware. As an image; I am using "Armbian 22.08 Jammy Kernel 5.15.y, Updated: Sep 24,202". The MAC address changes every time the Wi-Fi is turned on. I tried several different images. I tried a few simple fixes posted on the forums, but only managed to fix it for ethernet. But it was not successful for Wi-Fi. I need an image or solution that does not change the MAC address. Is there anyone who can help with this?

I am getting significant graphical issues with most programs on the "Jammy Gnome desktop" version. I also saw similar issues under KDE desktop after clicking a button relating to OpenGL in the graphics settings (and couldn't figure out how to get that dialog back or undo the setting). I would prefer to stick with Gnome, I assume this issue has something to do with hardware/graphics acceleration having an issue, the application launcher seems to be immune from the issue. Sorry, I am quite a noob when it comes to Linux/programming related stuff, I couldn't find any other mentions about similar issues in this forum. The issue happens on both this 5" LCD and an HDMI TV at 4k.

Hi, I want to use LCD on Orange Pi 3 LTS. But there are no fex/script.bin in the boot directory. The LCD pins are given the RGMII Ethernet Interface. I could not configure the device tree for internal LCD output. Could you please explain how can i use LCD on these system ? Good Work.

Hello, I am using the Armbian 22.08.2 Jammy with Linux 5.15.69-sunxi. When I issue "aplay /usr/share/sounds/alsa/Front_Center.wav" or "speaker-test -t wav" playback misses a few seconds from the beginning of the audio file. If I restart it immediately, I can hear the file playing correctly. Then I wait for a while, run it and the problem reappears. I read on this forum that people have had the same problem for years without finding a solution. Is there a solution or does anyone wise know what the problem is?

Hello fellow Armbianers! I'm using Orange Pi zero. My only complaint is the 30s boot time. Looking at the log files, seems like it only takes 5 seconds to boot once the kernel is loaded. The majority of this 30s is spent in uboot somewhere? Does anyone know how to speed up this boot process? I'm always just booting from SD card, don't need USB boot/network boot, console, or any of that. Thanks!

Hi there, OK, here's the picture: brand new Orange PI 3 LTS, made SD card with Armbian 22.08 sid - didn't boot; made SD card with Armbian 22.05 Jammy - still the same result. The result: [ 0.000000] Boot CPU: AArch64 Processor [410fd034] [ 0.000000] bootconsole [earlycon0] enabled WARNING: Unimplemented Standard Service Call: 0xc0000026 and on top of that, upon first boot Armbian copies itself to the eMMC? Because after removing the SD card, I was able to get the same result with just plugging in the power (it boots from eMMC...?). As far as I remember, I didn't see any similar behavior described in the documentation. …

Hello, on a fresh install (Armbian_22.08.1_Orangepi3_jammy_current_5.15.63), the ethernet eth0 interface doesn't retrieve any IP. Here comes the kernel ethernet related messages: After that, I have launched a dhclient command that took several minutes to stop. Then, an APIPA address is attributed to eth0 nterface. So I have launched armbian-config to set the eth0 to static. And it worked. But how to make DHCP works? Thank you PS all others devices on my network can retrieve an IP by DHCP. I also tried others OS on my Orange Pi 3 boards and the…

Hello, I own several Orange Pi 3 which I bought at different times. The last batch couldn't run the firmware I used previously: the ethernet was broken. So I suspect there is a new ethernet chipset on it. Current Armbian (Armbian_22.08.1_Orangepi3_jammy_current_5.15.63) works on both types. How could I differentiate the chipsets from the command line? Thank you

Hello, excuse in advance my English which is not my native language. I am electronicien, so i am a Noob on Linux, i prefer the hardware. I'm working on a "NanoPI NEO" and I would like to use an EMMC with an sd slot I drew. Because i kill 3 sd card last years. So i do it, like this i use the chip thgbmjg6c1lbail which is an emmc v5.1 8gO. https://jlcpcb.com/partdetail/Kioxia-THGBMJG6C1LBAIL/C524518 This card works very well on my computer with ubuntu, or my RPI4 with raspbian, but impossible to use it with armbian as well on my nanopi neo or my nanopi M1. as the log on my rpi4 with raspbian pi@raspberryp…

installed wireguard on orange pi, configured the config, it works. It was necessary to restart orange, and after restarting it don t connecting to the LAN cable, even the orange light bulb is not lit. I start without sd, everything is fine. Reinstalled, installed wg again and the same thing again. What is the problem? OS:Debian11 (https://redirect.armbian.com/region/EU/orangepi3-lts/Bullseye_current)

Hello, I have a Orange Pi One Plus. It has an onboard mic. No matter what i do i cannot record sound from it. Please help, how can i record sound from onboard microphone? marko@orangepioneplus:~$ cat /etc/armbian-release # PLEASE DO NOT EDIT THIS FILE BOARD=orangepioneplus BOARD_NAME="Orange Pi One+" BOARDFAMILY=sun50iw6 BUILD_REPOSITORY_URL=https://github.com/armbian/build BUILD_REPOSITORY_COMMIT=d485420c00 VERSION=22.08.1 LINUXFAMILY=sunxi64 ARCH=arm64 IMAGE_TYPE=stable BOARD_TYPE=conf INITRD_ARCH=arm64 KERNEL_IMAGE_TYPE=stable marko@orangepioneplus:~$ uname -a Linux orangepioneplus 5.15.63-sunxi64 #22.08.1 SMP Tue Aug 30 07:11:56 UTC 2022 aarch64 …

Since the CT (the A20 one, not the CT+) has been moved to CSC status, I've build a 22.04/jammy minimal image for my CT, and I figured I might as well share it with you. The only changes to "pure" armbian are some power management debug options in the kernel. https://github.com/IGNNE/cubietruck-armbian-unofficial/releases/tag/22.04-2022-09-09 SHA256 of zip file: 9d0028a9f5c6258a739f52f447bf4400d20fec52358f5006ae8a26b602acdfc0

Hi I'm trying to cancel echo for orange pi pc plus any idea? Methods I've tried and failed so far https://github.com/voice-engine/ec Bu yöntem de doğru hardware bilgilerini bulmadım http://alsa-project.org/db/?f=d75c947d6147c6c00b31ba67bd1a6d62c010cfad

Hello friends, I installed the latest version of ARMBIAN compatible with ORANGEPI 3 LTS. But on the login screen, the username and password fields are pixelated, change color unstable when moving the mouse or trying to enter the password. This error only occurs on the login screen, once the desktop starts everything is normal. Thanks for your help.

History work: started my work from raspberry pi but recently shifted to orange pi. On raspberry, me used teh UV4I server wif webrtc to broadcast video streaming and send controls through data channels from a web browser to control a robot. My application: So basically my application is a semi-autonomous car wif two cameras.me want to control teh car from a web browser and stream a video of both cameras on teh browser Issues: 1: On orange, pl broadcast streaming from USB cameras to a web browser? 2: Send controls from web browser to orange pi? 3: Teh UL4l drivers are not installable on an orange pi pc so need to find an alternate 4: halp to fi…

Why do I keep getting negative CPU temperature readings? pi@orangepizero:~/klipper_config/config$ armbianmonitor -m Running unprivileged. CPU frequency will not be displayed. Stop monitoring using [ctrl]-[c] Time CPU load %cpu %sys %usr %nice %io %irq CPU C.St. 21:01:44: --- 0.18 4% 1% 2% 0% 0% 0% -3280°C 0/4 21:01:49: --- 0.17 2% 0% 1% 0% 0% 0% -2433°C 0/4 21:01:54: --- 0.15 2% 0% 1% 0% 0% 0% -2675°C 0/4 21:02:00: --- 0.14 4% 1% 2% 0% 0% 0% -2796°C 0/4 21:02:05: --- 0.13 2% 0% 1% 0% 0% 0% -2312°C 0/4 21:02:10: --- 0.12 3% 1% 2% 0% 0% 0% …

Hi, i am trying to get the Respeaker 2 Mic Pi hat working on a Banana Pi Zero M2. The HAT uses the WM8960 codec and generates its own I2S MCLK. After some trouble i got the i2c interface working and i2cdetect shows a device at address 0x1a which is correct. But i can not get the I2S interface working. I have added a user overlay with the following .dts: /dts-v1/; /plugin/; / { compatible = "allwinner,sun8i-h3"; fragment@0 { target = <&i2c0>; __overlay__ { #address-cells = <0>; #size-cells = <0>; s…

Hi all, I recently bought a Banana BPI M2 Zero for a personal human-machine interaction project as this was the only (cheap) available option w.r.t. my specs (HDMI, entry-level OpenGL GPU, enough CPU power for the task). I got a version with Allwinner H3 (which in my view is good) and also read through the H3 buyer's guide. According to that guide, the CPU should be sourced by 1.3V, but to my (positive) surprise, I measured only 1.15V at the output coil (after the coil and against GND, of course) of the SY8113 regulator. However, there's certainly something not working as expected from the schematics: both, the SY8113 and the SY8089 1.2V regulators (SYSTEM+CPU…

Hello I'm quite new with armbian and Banana Pi, but have some experience with Raspberry PI. I started with Banana PI M2 Zero and armbian because of current unavailibility of Raspberry PI which is needed for some of my DIY pinball projects https://lisy.dev/ With a 5.15.48 Kernel Image I noted that the internal ethernet of M2 Zero is set to disabled, where with a 5.10.60 Kernel from the archive it works. After some investigation I used the "sun8i-h2-plus-bananapi-m2-zero.dtb" overlay from the 5.10 Kernel with a 5.15.43 Kernel and was happy that eth0 was working again. However as I think it is not advisable to mixing Kernel version…

Hi all. I just want to apologize for my English, I write everything through a translator. Can you please tell me how to turn on the TV output now? Previously, this was done via /boot/script.bin

Flashed the latest Jammy 5.15.48 image and the device went offline After connecting to HDMI I found out that RTL8188EUS is no longer available. Previous Focal image worked fine in headless mode with a `0bda:8179` dongle. Anyone knows why the driver has been removed? Thanks

Hello. I'v recently tried to update by old orange pi zero to latest armbian and it does not boot. Serial console is dead silent. I'v tried different armbian releases, sdcards, but result is the same. However card with old boots perfectly fine. Image orangepizerolts also works, but it has huge overheating problem. I'v tried to flash uboot to spi, but it does not boot either. Sadly old uboot did not worked with latest armbian. Any idea?

Getting FDT_NOT_FOUND(spi-add-cs1) and FDT_BADMAGIC(spi-dev-1) on uboot.

Good day, for my Orangepi PC+ I installed Armbian Ubuntu Jammy on a µSD card. Up until Armbian Ubuntu Strech I was able to use a PCM510A for sound output. The settings for this were easy. With all updated OS after Strech, I can't install the PCM. Unfortunately, the help that was published in the forum wasn't helpful or I couldn't take it over. On the eMMC I have installed Armbian5.59 Orangepipcplus Ubuntu xenial default 3.4.113 desktop. Because of the advanced age of this OS, there are no updates and upgrades. Luckily my internet radio still works. Can someone explain to me how I can install the PCM510A at Jammy? Kind regards hajupiko49

Hello. I reactivated my old BananaPi M1 to measure some Temperatures by Dalla1820-Sensors. This is working like a charm and I could resolve all the Problems I had. But now I want to use also one GPIO-Pin as an digital Input (via bash) But all manuals I found in the Internet didn't work. Every Time i try to setup a Pin by sudo echo (Pin-number) > /sys/class/gpio/export I get the message, that I don't have the rights to do this. Could it be, that the GPIO are not usable, when I activated 1wire ? (of course I used a different Pin as I use for 1wire) Or must I activate some more options as only "w1-gpio" in the armbian…

Hi. I'm trying to use GPIO's of OrangePi PC+ and after install WiringOP, when I run the gpio readall, all my GPIO's Mode are showing OFF. I tryed enable in armbian-config, but I have only pps-gpio and w1-gpio, I tryed enable both but doesn't work too. Someone knows some solution? Thanks.

After watching a video tutorial on youtube I have attempted to use the build scripts to create a newer image for my Pcduino V2. I had been initially using an image that I found on the archives which uses kernel 4.14, this worked fine for the most part apart from shutting down which would fail 9/10 to shutdown normally. the only way I could ensure that it would shutdown was to do poweroff -f otherwise it just went into a state where most things such as the wifi and usbs would no longer be detected and i was greeted with the message failed to reach target.poweroff. from what I could find out about the issue suggested that it was some kind of issue with systemd, but I could …

Hello, I have a problem with communicating with SPI device, namely accelerometer ADXL345 I quadripple checked connection and it seems to be fine, device shows in /dev/spidev0.0 I have also tested shorting miso and mosi and testing with spidev_test, here is the result: spi mode: 0x0 bits per word: 8 max speed: 500000 Hz (500 KHz) TX | FF FF FF FF FF FF 40 00 00 00 00 95 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF F0 0D | ......@....�..................�. RX | 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | ................................ My ArmbianEn…

Hello guys, there is a question, is there an EDK2(tianocore) for orange pi 3 lts? If yes, how can it be compiled? Maybe there are projects to run uefi operating systems for arm on orange pi.

I’ve recently ran into this where whenever I power up my Olimex Lime 2 eMMC with Armbian, it powers down before it propretly starts. Here’s what I managed to observe so far. Armbian version …em, latest at this stage, I guess, it’s a bit hard to check exactly right now press power on button, it powers on via HDMI I see the Armbian boot logo some early boot messages pop up and ends with “Starting kernel ....” (Loading init Ramdisk seems OK, loading of device tree also OK) it goes back to black screen with Armbian logo and the _ blinking for a very short time I see an error with a long number and saying something about ”rebooting again…

Hi I'm auto-login using nodm with orange pi. I run my udp.py file by creating a file named udp.desktop under the .etc/xdg/autostart folder at startup. but I need to play the wav file using pygame in the .py file, but I get a warning that the audio device could not be initialized. If I trigger my .py file manually, I can play the wav file without any problems. probably unable to load sound drivers during autostart. Can you help with this.

I have a orangepi board with H6 , it have BSP android 7 firmware. Now , I can enter BSP uboot shell. want to find a way to boot mainline kernel instead of BSP kernel. How to do that ? Any help would be much appreciated. EDIT: On amlogic arm64 board can use go command to load mainline u-boot , Does allwinner board have the similar way to do that ?

Issue: 1. I have Armbian 22.05 installed on emmc 2. I have run apt upgrade 3. During the process, I got an error due stated that no space on /boot 4. I have tried to reboot but no sign that board starting 5. I have burn SD, load from SD, copy SD boot to emmc boot and than can boot from emmc again The main question is how to prevent this issue in future? How to clean-up /boot from obsolete kernels and avoid space issue?

As you known OrangePi PC PLUS with armbian (e.g. Armbian 22.05 Jammy) can't be fully off. (But Xunlong's Ubuntu 16 can be off ok) I suggest change status of board from green "Supported" to yellow "SUITABLE FOR TESTING (WIP)".

I got myself a Banana Pi M2 Zero (with H3 chip) and am running Armbian (Armbian_21.08.1_Bananapim2zero_buster_current_5.10.60) on it. I have enabled SPI by adding the spi-spidev dt overlay. Now I want to use both CS pins at the same time so that I can connect two devices. The spi-add-cs1 overlay doesn't change anything so I researched a bit and found this custom overlay. Unfortunately it didn't work too and there is still only a single spidev available. Is there any way to enable both of them at the same time?

Hi, so without knowing what the swappiness actually is I changed the value from 100 to 512. Since then, I can't boot my Banana Pi M2 Zero. Shortly after that, I remembered again: swappiness is the percentage of how often to use swap and not the maximum amount of storage. Can I repair it inside uboot? Can I plug the sd card into my PC and edit the files there? Here is the log from the serial console. It's stuck forever after the last line. .............................................................. U-Boot SPL 2020.10-armbian (Nov 23 2020 - 15:48:18 +0100) DRAM: 512 MiB Trying to boot from MMC1 U-Boot 2020.10…

Hello! I run Armbian (just updated to version 21) from an 128GByte heavy duty SD card. I am just trying to setup searx (https://github.com/searx/searx) which is using Docker containers. One of the Docker containers won't start, throwing an error message: I searched for long, trying to find some possible solution for this issue. The most fitting seemd to be, where someone said: Yes, it's for another OS and hardware, but I found no other possible solution. So disabling apparmor through a kernel parameter, is what I am trying to achieve. I addded 'apparmor=0' to the bootenv, using armbian-config. I al…

how can i know the name given to the usb port when i connect my arduino to my orange pi pc plus??? I need to be able to connect it but node red does not read it, please help

Installed the Armbian distribution on 05.22 Jammy. In other distributions armbian, zombies are similar. Does not complete the shutdown -P. Instead of disconnecting - a kernel panic. In other distributions, the completion of work is correct. What to do? armbianmonitor -u : http://ix.io/43ZK Error: https://freeimage.host/i/wa9cWF

Hello, I am not able to get the keyboard working. I have tried the downloads and compiling my own images. Bulleye is the only thing I can get to compile. There are error massages if I try to compile anything other than Bulleye.

Using the latest FW Image https://redirect.armbian.com/orangepizero2/Bullseye_legacy the Orange Pi doesn't boot anymore or at least I'm not able to establish a ssh connection. If I use the the archived previous version the board behaves completely normal until I perform an "apt upgrade". After upgrading it also doesn't boot anymore.

Hello, I would like to connect RFID-RC522 to OPI 3 LTS My wiring as bellow VCC -> Pin 1 GND -> Pin 9 MOSI -> Pin19 MISO -> Pin21 SDA -> Pin24 SCK -> Pin23 RST None I wired it based on this chart Then I edit the armbianEnv.txt added Reboot . But still not see the /dev/spi Where am I wrong?

Hello, I am looking for the old version of Armbian_5.30_Orangepipcplus_Ubuntu_xenial_default_3.4.113 Have checked the archive server here: https://imola.armbian.com/archive/orangepipcplus/archive/ but no luck There are old link found https://dl.armbian.com/orangepipcplus/archive/Armbian_5.30_Orangepipcplus_Ubuntu_xenial_default_3.4.113.7z but has been "404 Not Found" Hope that someone still archived this version, please upload to a cloud server i just want to download it for my project Thanks in advance

Hi guys, I am new here. I bought a NanoPi Neo (H3). I am new to Armbian, but not new to Debian. The NanoHat OLED works fine with UbuntuCore 16.04 and kernel 4.14. Now I installed a new microSD card with latest Armbian Bullseye. But the NanoHat doesn't work. Armbian is up-to-date: uname -a Linux nanopineo 5.15.48-sunxi #22.05.3 SMP Wed Jun 22 07:35:10 UTC 2022 armv7l GNU/Linux cat /proc/cpuinfo processor : 0 model name : ARMv7 Processor rev 5 (v7l) BogoMIPS : 48.00 Features : half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm CPU implementer : 0x41 CPU architecture: 7 CPU variant : 0x0 CPU part : 0xc…

Hi, I am having an issue with my system running a nanopi Air. After boot, my system won't detect my rtc (i2cdetect doesn't show it) nor my USB device. The problem must come from my SD card or is software related. Indeed, when I am booting from another SDcard, with aembian installed, everything is detected normally. Does anyone has a clue? Thank you, Tibibs

Hello. I have a problem with Orange Pi Zero LTS. I also have an expansion board and the required 3.5-jack cable. I have read many different forums and sites where people have described problems with video signal output. Often there are solutions such as: 1. Editing the file /boot/script.bin But this file does not exist. 2. They also talk about the launch of "tv". You need to add an entry to /etc/modules. But that doesn't work either, since ./tvout doesn't exist. As I understand it, in new versions there is no TV support, but there is no way to download old versions either. The latest version that can be downloaded is 5.59,…

Orangepi 3 LTS Armbian 22.05 Jammy XFCE CAN'T CONNECT WITH WIFI

hallo, for bananapim2 i can build jammy legacy and current, cli and xfce, on my pc-ubuntu-jammy. I just coppy bananapim2.eos to bananapim2.conf, removed box86 files while my pc-ubuntu-jammy seems have problems with build-script to download addition softaware from some git or ppa. Current-jammy goes off on boot on "starting kernel", but if i build with linux-sunxi-legacy.config renamed to linux-sunxi-current.config, boot is successful. On all builds i cannt becomme LAN over eth0, but wifi is ok. I can see eth0 and wlan on Networkmanager(cli too) and ifconfig. I tryed to disable all broadcom drivers i knew thru blacklisting, but wifi is working. Configuring NetworkManager a…

Hi, I've decided to make a fresh install on a bigger SD card using Armbian 22.05 Bullseye on my Opi PC+. The aplay command doesn't output any sound, and alsamixer show the card is H3 codec. I don't know if the sound is output to the HDMI port or any other problem. Anyone could help ? Than you

Armbianmonitor: http://ix.io/3UHS Hi all After update kernel from 5.10.60 to 5.15 or 5.16 on my Orange PI PC+ MJPEG-Streamer throws: Quote libv4l2: error turning on stream: Cannot allocate memory motion throws: Quote [1:ml1] [ERR] [VID] v4l2_set_mmap: Error starting stream. VIDIOC_STREAMON: Cannot allocate memory I tried to decrease resolution - even 320x240 not helps. Rolling back to 5.10.60 helps, but it's not very sustainable solution. Are there any known solution for 5.15-5.16? Today checked kernel 5.15.43-sunxi and 5.17.11-sunxi - same issue baal@3dprinter:~$ mjpg_st…

How do I enable the cgroup memory controller on Armbian? I’m trying to control memory usage on my orange pi one using systemd with a unit file as follows: [Service] Slice=influxGroup.slice MemoryAccounting=true MemoryHigh=100M MemorySwapMax=250M The command systemd-cgls confirms that the influxGroup.slice has been created, yet memory is not controlled in line with the parameters in the unit file. I think the issue may be that cgroup memory controller is not enabled. I haven’t done anything to enable it, but I did notice that dmesg appears to indicate an enable statement in the kernel parameters: [ 0.000000] Kernel…

I am trying to get USB 2.0 port to reach maximum bandwidth with OTG port (Hi-Speed - 480 MegaBits/second) on PineCube device. Currently it is performing as Full-Speed (12.5 MegaBytes/second) usb port. I have measured the speed and performance using iperf + g_ether kernel mod + OTG port (details below) Official datasheet of PineCube (https://files.pine64.org/doc/datasheet/pinecube/S3_Datasheet_V1.1-20180123.pdf) tells that the port can perform up to 60 MegaBytes/second or 480 MegaBits/second. g_webcam mod is also performing at Full-Speed mode. Spoiler root@pinecube:~/uvs-gadget# iperf3 -c 192.168.10.5 -f M Connecting to …

Hi everyone! Follow instructuions https://linux-sunxi.org/Sunxi-Cedrus to setup hw decoding everyone need kernel with flags: CONFIG_MEDIA_SUPPORT CONFIG_MEDIA_CONTROLLER CONFIG_MEDIA_CONTROLLER_REQUEST_API CONFIG_V4L_MEM2MEM_DRIVERS CONFIG_VIDEO_SUNXI_CEDRUS Images from armbian repo is without one of them - CONFIG_V4L_MEM2MEM_DRIVERS So my proposal is to make kernel for desktop prebuilds with this flag, if its possible ofcourse. Im understand that is opensourse project, so my help can be like that - i have really much space on Y.Drive and i can share folder to minimize download usage of armbian repo.

Hello, I am looking for the latest Banana Pi M1 server image but I only see the XFCE desktop version. Witch image should I use?

Hello. Can't run x11 on Debian 11. I am using Nano Pi AIR (Allwiner h3). Since the board is not officially supported, I built the image on debian 11 myself. root@nanopiair:/# uname -a Linux nanopiair 5.15.44-sunxi #trunk SMP Wed Jun 8 08:41:04 UTC 2022 armv7l GNU/Linux The LCD is connected via SPI, chip is ili9486. Device tree file has been created, I can see the loading process and the console on the screen. I'm trying to start the X-server by "startx" from ssh session, but for some reason it ends immediately after the start. I tried using fbdev or fbturbo as driver. I also tried to remove the config with the driver in general (section "Devi…

Hello, my orange pi device crashes to white screen at random times. And in this case USB, ethernet does not work.Which logs should I look at?

How install linux-tools for USBIP >usbip WARNING: usbip not found for kernel 5.15.43 You may need to install the following packages for this specific kernel: linux-tools-5.15.43-sunxi linux-cloud-tools-5.15.43-sunxi You may also want to install one of the following packages to keep up to date: linux-tools-sunxi linux-cloud-tools-sunxi >apt install linux-tools-sunxi Reading package lists... Done Building dependency tree... Done Reading state information... Done E: Unable to locate package linux-tools-sunxi I tried linux-cloud-tools-sunxi, linux-tools-5.15.43-sunxi, linux-cloud-tools-5.15.43-sunxi BUT …

Hi to all, I have been using banana pi pro and m1 for some years as mini PBX with asterisk, due the stop of bananian's development that works perfectly but now is obsolete and vulnerable, i'm testing armbian but registered prompt audio sounds choppy and i can't find reasons, I tried to move files in ram disk, use usb to lan interface, increase process priority, use performance ad cpu governor, also tried Armbian 5.83 Bananapi Debian stretch next, same problem. Any suggestion ? Thanks advance.

Hi all. I understand, maybe my board Nanopi Neo CORE is not supported on the forum, but maybe someone will tell me how to write dts correctly # uname -a Linux NanoPi-NEO-Core 4.14.111 #126 SMP Mon Feb 22 17:04:18 CST 2021 armv7l armv7l armv7l GNU/Linux I compiled and installed ffmpeg with Cedrus H264 and cedar_ve.ko After that I see # dmesg | grep cedar [ 4.982170] cedar_ve: loading out-of-tree module taints kernel. [ 4.988972] sunxi cedar version 0.1 I'm trying to edit and compile /boot/sun8i-h3-nanopi-neo-core.dts using sun8i-h3-nanopi-neo-air.dts First I change before soc reserved-memory { …

Hi all. I'm new, so don't hit too hard. I'm interested in how the NAS Dock for NanoPi Neo2 is defined in the system. I want to install OpenWRT, because I need a NanoPi based router. Armbian seems to me too complicated for such tasks. If you put OpenWRT on NEO2, then NAS Dock is not detected in the system. At that time Armbian determines, I can easily open the HDD or connect devices to the dock's USB port. Please tell me. Which module or driver is responsible for the dock to be defined in the system? The Openwrt forum has not yet been able to help me, so I'm writing here. Help as you can. Скрытый текст Привет всем. Я новичо…

Hi forum members, the apt utility in my bpi m2 zero can't find neither dnsutil nor bind9-dnsutil for bullseye, here the output: pi@fewo-relais:~$ sudo apt install bind9-dnsutils Paketlisten werden gelesen… Fehler! E: Encountered a section with no Package: header E: Problem with MergeList /var/lib/apt/lists/deb.debian.org_debian_dists_bullseye_main_binary-armhf_Packages E: Die Paketliste oder die Statusdatei konnte nicht eingelesen oder geöffnet werden. pi@fewo-relais:~$ pi@fewo-relais:~$ cat /etc/armbian-release # PLEASE DO NOT EDIT THIS FILE BOARD=bananapim2zero BOARD_NAME="Banana Pi M2 Zero" BOARDFAMILY=sun8i BUILD_REPOSITORY_URL=h…

Hello there, i have one orange pi pc 2 and i need to put this work with 2-Channel Isolated CAN Expansion HAT from Waveshare (2-Channel Isolated CAN Bus Expansion HAT for Raspberry Pi, MCP2515 + SN65HVD230 Dual Chips Solution, Multi Onboard Protection Circuits (waveshare.com) But im stuck with .dts and overlays. This HAT was design to work with raspberry pi but i know we can put it to work with orange pi. My problem is with "chipselect" cause our GPIO pin configuration are diferent then Raspberry Pi Could you please give me an example how should it be my .dts?

i am installing instapy but have problem with start python file. He's need glibc_2.33 version But latest armbian have 2.31 How to update glibc on OrangePi PC? Or u know how to fix that problem

I have several OpiOne Plus boards. They differ by the date of manufacture (let's say 1st batch and 2nd batch) 1st batch: Works with kernel 5.10.x but does not boot kernel 5.15.x. Red light is on, power meter shows very little consumption, ethernet does not go up. Switching to last available 5.10.x kernel resolves the situation. 2nd batch: Successfully work with both 5.10.x and work with 5.15.x. Green light is on, power meter shows adequate consumption, board works. I'm pretty sure, that no more "new" opi one plus will appear at Xunlong shop and this issue won't be fixed in visible future. But well.. How I can "freeze" kern…

Hi, Nanopi R1 - Kernel and Armbian version: 4.19.62-sunxi #5.92 I have the following problem: If I put the ethernet cable on the interface, and then turn on the nano pi, the interface receives a valid ip. But the problem is, if I start nanopi without the cable connected, and I connect after system boot, the interface does not receive ip configuration. Configs and logs: /etc/network/interfaces: source /etc/network/interfaces.d/* auto eth0 iface eth0 inet dhcp auto eth1 iface eth1 inet static address 10.100.3.1 netmask 255.255.255.0 gateway 10.100.3.1 auto lo iface lo inet loopback up command iptables-rest…

I have set up a server on a nanopi-r2s running Armbian version 5.15.25-rockchip64. It all works fine apart from one thing: while other devices can successfully use BIND on the server, the server itself cannot find the local BIND. If I type in this command host device.localdomain 127.0.0.1 it returns the following: device.localdomain has address 192.168.0.20 192.168.0.20 is the correct address for device.localdomain from the local BIND. If I omit the 127.0.0.1 from the command, it does not find the correct address.: device.localdomain has address 36.86.63.182 device.localdomain has address 36.86.63.182 Host device.localdomain not …

I built an adapter for a SPI interface SD Card Reader (https://www.ebay.com/itm/161201009722). I'm assuming I need to add in an overlay to make this reader show up, but I am not sure what that should be.

When I login on the console, there is this display with a bunch of information, including the CPU temp. I have need to keep track of my CPU's temp, since it seems to be overheating (I have a heat sink on it, but does not seem to be enough -- I have a fan on order). I want to be able to check the temp from time to time, so I would like to run at least the part of the login banner program. What program is that? I am not seeing anything obvious in /bin.

Hi form germany, i have problemes with my M1. The system hangs and only ping is working here the last timestamps: do, 14.04. 18:00 so, 01.05. 2:45 do, 05.05. 3:00 mo, 09.05. 15:22 i use Armbian 22.02.1 Focal with Linux 5.15.25-sunxi homeassistant + portainer (docker) mosquitto samba with sata 500gb ssd do we need some other logs? thanks to this nice work 🙂

Hi Dear Friends I have Sunvell R69 New version with Ram2 G Official Frimware IS android IS 10 I tested H3-R69-MXQ-S-MXQ4K-8PD3-1.1.4 This frimware Wifi and Sound Not Working Tested T3CH-ASSIS_H3_Stock Rom R69-H3-Allwinner_T3CH-ASSIS All Rom Wifi and Sound Not Working Any Fimware For Share With me ??? To fix this Problem ???? please Help ?

Hi everyone, Since i update to kernel 5.15.25-sunxi , every reboot the mac of wlan0 changed the mac address and router giv him another ip. i will be very happy to solve this issue , Thanks! Note: I tried to re-download the ARMBIAN from the official website, and burned a new SD. This experience did not help. First boot: Second boot:

Hi, I followed the following link to create encrypted root. However, every time I boot, i don't see any prompt for password. My armbianEnv.txt is following", but nothing display at "Console" (HDMI) or "Serial" (debug 3 pins next to USB port). ~ Has anyone had any success? I did this for OrangePi Lite 2 (64-bit) H6 and no issue. Thanks

Hello all. I have a Nanopi due2 with Armbian. I've enabled my SPI in armbianEnv.txt file and with: overlays=spi-add-cs1 spi-spidev usbhost0 usbhost2 usbhost3 param_spidev_spi_bus=1 param_spidev_spi_cs=1 but when I try to use "/dev/spidev1.1", CS pin is active high by default not active low. how can I change it to active low.

Sorry for the minimal info provided in this report but, due to the possible data corruption which the bug may cause, I'm not willing to reproduce this again on my board which runs in production. One week ago, I experienced data corruption happening on the nanopi. Actually it was some time (more than one month) that I saw the board acting weird: - long ssh transfers would sometime brake (via https://github.com/dooblem/bsync) - `apt update` reported invalid keys for the official armbian repository - on rare occasions, the board would freeze (not respond to ssh, requiring manual power cycle) After experiencing data corruption, I …

I have an orange pi zero that I'm going to use as a pi hole. When installing pi hole, I received a "Error: Unable to update package cache. Please try "sudo apt update"." I did just that and received another error stating Err:1 https://ports.ubuntu.com focal InRelease Could not connect to ports.ubuntu.com:443 (2620:2d:4000:1::19). - connect (111: Connection refused) Could not connect to ports.ubuntu.com:443 (185.125.190.39). - connect (111: Connection refused) Could not connect to ports.ubuntu.com:443 (2620:2d:4000:1::16). - connect (111: Connection refused) Could not connect to ports.ubuntu.com:443 (185.125.190.36). - connect (111: Connection refused) Er…

When i first tried out my orange pi prime in october 2020 i thought i recalled that the wifi worked. With a current armbian image, the wifi can't authenticate. I tried several of the available kernel images. I'm sure that the wpa2 password is correct because I control the router and other devices connect all the time. If i plug in an ath9x usb wifi dongle, that is able to connect, so it would appear to be an issue with the onboard rtl8723bs driver.

I have Armbian 22.02 Bullseye installed on my Orange Pi zero. The wifi connection worked fine at first, but after a few reboots the device 'wlan0' seems to no longer exist. In the Armbian-config settings the entry wifi is no longer present and also in ifconfig wlan0 is no longer displayed. I have now reflushed the system 3 times and always have the same problem.

Using a clean install of Armbian 22.02.1 with Linux 5.15.25-sunxi on a NanoPi NEO the green & blue LEDs no longer work. Previously they have worked with both Armbian and DietPi. # uname -a Linux nanopineo 5.15.25-sunxi #22.02.1 SMP Sun Feb 27 09:23:25 UTC 2022 armv7l GNU/Linux # cat /sys/devices/platform/leds/leds/nanopi:green:status/trigger cat: '/sys/devices/platform/leds/leds/nanopi:green:status/trigger': No such file or directory # cat /sys/class/leds/led{0,1}/trigger cat: /sys/class/leds/led0/trigger: No such file or directory cat: /sys/class/leds/led1/trigger: No such file or directory # ls -lha /sys/class/leds/ total 0 drwxr-x…

Hi all After update kernel from 5.10.60 to 5.15 or 5.16 on my Orange PI PC+ MJPEG-Streamer throws: motion throws: I tried to decrease resolution - even 320x240 not helps. Rolling back to 5.10.60 helps, but it's not very sustainable solution. Are there any known solution for 5.15-5.16?

Hello, I'm sort of an "educated noob" on Linux, meaning I understand about 1/2 of the postings in forums like this one. And I seem to have a problem. I am using Armbian Buster on an Orange Pi One Plus. After the most recent (to me) batch of updates, the machine will no longer boot. The error is: "Gave up waiting for root file system device." This occurs after numerous instances of "Running /scripts/local-block", (which does not seem to exist), and is followed by "ALERT! UUID=[valid UUID] does not exist. Dropping to a shell!" The "shell" it pro-ports to drop into is mythical, I assume because no keyboard driver has eve…

Hi all, The plot thickens. This is only an issue when eth0 is given an IPv6 address by my home router. If i disable IPv6 at home my problem goes away. I am having some issues getting wireguard to play the game. I have a fresh Armbian Focal 22.02 install on a NanoPi Neo. The problem is that the wirguard interface comes up, then traffic doesn't flow., not even to the other side of the wireguard link (10.66.0.1). tcpdmping on the other side of the connection shows no packets at all coming into the far ends 51820. Stopping wireguard on both sides and using netcat via UDP and TCP I can see the traffic I expect. I can also use my Android mobile phone and…

Hi, After upgrading linux-image-current-sunxi64 package from 21.08.1 to 22.02.1, bringing kernel version 5.15.25, the CPU temperature raised abnormaly on my olimex teres board. Temperature is above 60°C at startup, whithout any activity or load average. The issue persists with latest 5.16.16 kernel from linux-image-edge-sunxi64 package. I noticed temp at startup around 30°C with 5.4.88-sunxi64 kernel, 40°C with 5.10.60-sunxi64 kernel and above 60°C with 5.15+ kernels. Does anyone have cpu temp issue with 5.15+ kernels ?

I have tried 3 Orange Pi 3 images on my orange Pi 3 LTS. None of them will mount the root fs and continue booting. It shows btrfs, but the partition is ext4 and the armbianEnv.txt file has the correct UUID and ext4 stated. I can boot an image from the OrangePi website, so I am 99% certain it is not the power supply or sd card.

I'm using a NanoPi Neo as Homegear gateway. This requires the SPI interface (/dev/spidev0.0). Yesterday I ran apt-get upgrade, which bumped my kernel from 5.10.60 to 5.15.25. No other changes have been done, Since then no SPI devices are created anymore and the gateway fails! I tried to downgrade the kernel already using armbian-config to 21.08 5.10.60-sunxi. But that reported an error (do not remember the text; was very late) and left the Nano unbootable. I could restore the 5.15.25 kernel by manually editing the zImage symbolic link in /boot. Using param_spidev_spi_bus=1 instead of 0 does not help. …

Creating a wireless access point through armbian-config fails in the new 22.02 release for the popular TP-Link TL-WN725N USB Wifi Dongle. I am raising it here because it worked previously on 21.08. I have tracked it down to be related to a driver change. Release version 22.02 uses the r8188eu and in fact this is one of the drivers the Hotspot configuration actually warns you about. Could this commit be related? In order to overcome this I have downloaded the official TP Link driver sources. but failed to compile them because headers are missing (even after using armbian-config to install headers). I have also followed the official documentation to learn about…

Gents, installed Armbian Bullseye successfully to my Banana Pi M2 Berry. In second step i moved the OS to my attached 2,5 WD RED Sata Harddrive. This was easily possible with the command "sudo nand-sata-install". But now, i see that my /var/log is full, because its located in ZRAM. root@BananaPiM2Berry:/etc/systemd/system# df -h Filesystem Size Used Avail Use% Mounted on udev 431M 0 431M 0% /dev tmpfs 100M 11M 90M 11% /run /dev/sda1 687G 1,3G 651G 1% / tmpfs 500M 0 500M 0% /dev/shm tmpfs 5,0M 4,0K 5,0M 1% /run/lock tmpfs 500M 0 500M 0% /tmp /d…

/sys/class/leds is not populated when running jammy with kernel 5.16.11

Orange Pi Zero 2 After installation Armbian 22.02 Focal stopped loading. help me please in UART outputs the following U-Boot SPL 2021.01-rc4-armbian (Jan 05 2021 - 03:01:27 +0100) DRAM: 1024 MiB

Hi, is this the right place to ask about support to configure a dtb overlay? I created a .dts file for my ILI9341 TFT display which is connected to a cubietruck running armbian. most of it I copied from the internet and adapted my changed (pin configuration and spi device). Previously I my configuration was done in a fex file and also created a pcb to connect the display to the cubietruck. See german documentation https://klautesblog.blogspot.com/2015/12/ili9341-22-tft-display-am-cubietruck.html?m=1 It worked perfectly but now I’m facing some issues with the new system. Armbian: Armbian 21.08.1 Focal Kernel …

Clean system does not start after migrating to SSD using armbian-config. Bootlog: Spoiler U-Boot SPL 2020.10-armbian (Aug 08 2021 - 14:54:07 +0200) DRAM: 2048 MiB CPU: 912000000Hz, AXI/AHB/APB: 3/2/2 Trying to boot from MMC1 U-Boot 2020.10-armbian (Aug 08 2021 - 14:54:07 +0200) Allwinner Technology CPU: Allwinner A20 (SUN7I) Model: Cubietech Cubietruck I2C: ready DRAM: 2 GiB MMC: mmc@1c0f000: 0, mmc@1c12000: 1 Loading Environment from FAT... Card did not respond to voltage select! Setting up a 1024x768 vga console (overscan 0x0) In: serial Out: vga Err: vga Allwinner mUSB OTG (Peripheral) Net: eth0: ethernet@1c50000, e…

I have armbian cli from armbian website for orange pi 3 SBC Putty refusing connection Orange pi 3 holds a still red light

Hi! Is the Orange Pi3 image suitable for the Orange Pi3 LTs? Or where to find it?

Hi, I tested my board with below armbian distro. Question is , there are lots of entry about H3 hw decode problems, are these fixed in this distro? When i open 1080p mp4 Big Buck Bunny video still doesnt work is that any specific settings to work with hw accelerated decode. How can i be sure that hw decoding is running with VLC? or any specific ffmpeg command. Linux orangepipc 5.10.60-sunxi #21.08.1 SMP Wed Aug 25 18:19:32 UTC 2021 armv7l armv7l armv7l GNU/Linux I tested video with - VLC using 55% cpu - MPV using 40% cpu Umit

Hi, I was trying to use OrangePi One to add a filter to my USB camera, so that I can apply some image processing to the original input image. The original project uses raspberrypi: https://github.com/likeablob/rpi-wfh-webcam It captures the image from a USB Camera, then applys some image processing on Raspberry Pi. Lastly, it creates a virtual camera that sends the output image to the PC. I would like to achieve the same effect using OrangePi One (Armbian), and the only problem left is to simulate a virtual camera using the USB Gadget. What I tried: $ sudo modprobe g_webcam musb-hdrc.4.aut…

Hi, I'm trying to set a different GPIO state at boot (output 0) on a Orange pi Zero and I couldn't find any solution to this. Can someone tell me if this is possible and if yes how to do it ? Thanks !