Software, Applications, Userspace

Im using armbian server edition. Im trying to setup my box to route internet from end0 (192.168.1.6) to internet on usb0 (dhcp). Im running dns & dhcp via docker adguard - but assume thats not working for now because once the nftable rules are applied I cannot access their web interfaces. But for now ping with ip is okay. With my current setup I can ping the internet from the 'router' via the interface usb0. But I cannot ping from the interface end0. ping 8.8.8.8 -I usb0 <- works ping 8.8.8.8 -I end0 <- Destination Host Unreachable Do I need to setup any static routes? Or should nftables handle all the routing? Ive t…

Installed 24.8.4 on OrangePi Zero2. Assumed I would need to install neofetch to launch it, so didn't even try to run it before going straight to 'apt install neofetch'. On attempting to install, I saw the following: Reason is that armbian-config package includes /usr/bin/neofetch. To avoid confusion for new users, it seems like it would be good to either have armbian-config depend on neofetch instead of including the bash script that that package includes*, or have the Package file for armbian-config lock out the installation of neofetch (I think the Provides, Replaces, and Conflicts directives might be needed for that). I had a look around the https:/…

I'm trying to get my udev rule working on armbian. But I cant make anything work at all. I am wanting to rename the android usb tether to a standard name usb0. Ive tried the following rules /etc/udev/rules.d/99-usb-tether.rules SUBSYSTEM=="net", ACTION=="add", ATTRS{interface}=="RNDIS Ethernet Data", NAME="usb%k" SUBSYSTEM=="net", ACTION=="add", ATTRS{ID_USB_INTERFACES}=="*:e00103:*", NAME="usb%k" SUBSYSTEM=="net", ACTION=="add", ATTRS{idVendor}=="18d1", ATTRS{idProduct}=="4ee3", NAME="usb0" none of them work, also tried rebooting sudo udevadm control --reload-rules sudo udevadm trigger Ive ran the command: udevadm test /dev/bus/usb…

As configured on install (at least in 24.8.4 I installed), the netplan config files try to manage all networking interfaces - which breaks the virtual bridge interfaces that containers and VM managers like Podman, Docket, etc create and use. See https://github.com/moby/moby/issues/40217#issuecomment-2041628162 for more information If networkctl shows podman* or veth* as managed then this is probably the problem breaking your container networking. To work around this issue, I modified the file /etc/netplan/10-dhcp-all-interfaces.yaml to only manage en* interfaces rather than all interfaces, followed by netplan apply. # Added by…

I have Armbian running on an Orange Pi and I like to work by changing to su so I'm not having to constantly type sudo in front of commands when I have a lot of commands that need root privilege. However, bizzarely, sometimes I still ahve to use sudo. So for example: root@orangepi5-plus:/home/Data/Mercurial_Info# usermod -a -G www-data username bash: usermod: command not found If I do sudo usermod -a -G www-data username How can I fix this please? It's also stopping me running a script I need that I ran on my old Banana Pi running Armbian.

I installed various version of Debian and Ubuntu Server (CLI) of armbian in orange pi 5, but there is no uart selection in armbian-config. I think this is os version problem. Could you can see the uart select in armbian-config? If so, can you tell me what I am missing? I tried apt upgrade and apt update and armbian-install, but these updates did not get me the uart port selection. Thank you for your reply

How to mount a usb hard disk drive? I’m trying to set a NAS-like system on a TvBox. Share an HDD over samba. https://paste.armbian.com/xuvobugato

I have been trying to download Ubuntu 24.04 Desktop images with Armbian Linux v6.6 for Jetson Nano of which the image size is 1.5gb. But the download always stopped at 200+MB. Anyone know why? Thank you.

I have Armbian 24.8.4 running on my CubieTruck. I wanted to experiment with running an access point on it, and was able to configure and run hostapd to do so. But now I want it to be a Wi-Fi client again and it appears that I royally screwed something up while playing with hostapd. When I run armbian-config and select the Network option, nothing about Wi-Fi shows up any more. Any suggestions where to start to get things back to how they were out-of-the-box? A reinstall is not an option.

I’m trying to help people use my Pi Hat with RPi clones and everything works, except for the DS18B20 temperature sensors. Using current versions of Armbian on both a Banana Pi M2 Zero, a Banana Pi M4 Berry, and an Orange Pi 3B, but no devices show up in /sys/bus/w1/devices. /etc/modules contains: w1-gpio w1-therm /boot/armbianEnv.txt contains: overlays=w1-gpio param_w1_pin=PA6 param_w1_pin_int_pullup=1 NOTE: PA6 is used so that it matches up with the default 1-Wire pin used on an RPi. These hats are already built, I can’t change this to a different pin.

Hi, just to be clear I've zero doubt the problem is me but this is a recurring issue and I've been unable to nut it out on my own. I've found (both with bullseye and bookworm) that installing Wireguard borks my system - ie I am unable to boot after install. I'm running headless and therefore am limited diagnostically (I can't say what errors are occurring when attempting to reboot) I realise this'll make my problem frustrating for a lot of folks to engage with but any ideas at all'd be helpful. When first using Armbian a few years back it seemed as though the issue was that the LTS kernel did not include wireguard support and I discover…

Hello, I can only find the "rear-doc" packet but not the "rear" packet. Armbian 24.8.4 bookworm on armv7l Do you have to activate a repo? ------ Hallo, ich finde nur das "rear-doc" packet aber nicht das "rear" packet. Armbian 24.8.4 bookworm auf armv7l Muss man da noch ein Repo aktivieren ?

Back in the days, i've installed armbian on my "Odroid XU4". those where the days when "buster" was still a thing. In the meantime, I've updated the system (change apt repos; run 'apt full-upgrade'), and I'm now running "bookworm": # lsb_release -a No LSB modules are available. Distributor ID: Debian Description: Armbian 24.5.5 bookworm Release: 12 Codename: bookworm unfortunately, /etc/armbian-image-release still thinks i'm running buster (and armbian-20.02.7): # PLEASE DO NOT EDIT THIS FILE BOARD=odroidxu4 BOARD_NAME="Odroid XU4" BOARDFAMILY=odroidxu4 BUILD_REPOSITORY_URL=https://github.com/armbian/rkbin BUILD_REPOSITORY_COMM…

Hello, I am having a lot of fun making my first apps with python and tkinter... and with my recent good experiences with LCD TFT displays, I want to create an "appliance" project. I can start non-GUI apps with systemctl service files, and they run with the proper user permissions... and I don't worry about giving it root access. But I would like to do the same with GUI apps. They would be full screen, 320x240 on the LCD TFT. All I can do now is: * start with armbian minimal (with orange pi zero in my case) * add the DTS for LCD and touch, and the ko for spi-gpio (as seen in my threads in the orangepi zero section) …

I recently used Linphone for an audio call from my laptop to my desktop and it works for audio calls in command line mode With video calls, it is promising, but it complains with MSvp8 media errors (most likely can't use decoding libraries) I really want to use them in my armbian SBC since it is so lightweight (and my ili9341 LCD would look nice with a video call ) Does anyone here have experience with Linphone and BareSIP (another SIP video client, even more lightweight). The only discussion I see about it is in the Linphone google group and the german forum for "DoorPi"... but I can't see a guide to install and use it.

hi all, i installed a new build Armbian_community_24.8.0-trunk.596_Orangepizero_noble_current_6.6.44.img.xz into a new SD card i upgraded the OS and all was fine. but during the Octoprint install this phase freezed: Building wheels for collected packages: zeroconf, regex, MarkupSafe, argon2-cffi-bindings, sgmllib3k Building wheel for zeroconf (pyproject.toml) ... \ also the other two ssh terminal was freezed but the IP address (wired and wlan) was reachable, no toher SSH sessions was possible. i powered off the board and restarted i tried to reinstall octoprint ( OctoPrint/bin…

Hi, I am getting the message above when trying to run: pip3 install ffpyplayer Then the following message: Running setup.py clean for ffpyplayer And here I get: #include "libavcodec/packet.h" ^~~~~~~~~~~~~~~~~~~~~ compilation terminated. error: command 'arm-linux-gnueabihf-gcc' failed with exit status 1 Question: Any tips for getting this fixed? Note: Installing ffmpeg worked fine before with: sudo apt-get install ffmpeg and: ffmpeg -version delivers: ffmpeg version 3.4.11-0ubuntu0.1 Copyright (c) 2000-2022 the FFmpeg developers built with gc…

Hello, I have downloaded image from https://dl.armbian.com/odroidhc4/Bookworm_current_minimal-homeassistant Build Date: Oct 3, 2024 I was not able to flash the image with Balena Etcher. Error [Main Instruction] Error opening source [Content] Something went wrong while opening C:\Users\marek\Downloads\Armbian_24.8.1_Odroidhc4_bookworm_current_6.6.47-homeassistant_minimal.img. Error: (0 , h.requestMetadata) is not a function Then I tested sha integrity and CRC failed with 1 error (not found 1) Same result with image for Odroid C4 HASS and Odroid OMV Any idea what can I try? Thanks Marek

SBC Client Armbian : 22.11.4 Jammy SBC : RockPro64 Kernel : 5.15.0-rockchip64 aarch64 Windows Host Windows 10 Windows Remote Desktop Connecting through LAN (No wifi) Hi, I followed this simple ,great guide here to get remote desktop access from Windows working. sudo apt install xrdp xorgxrdp sudo systemctl enable xrdp sudo reboot When I use the root account to log in to an Armbian session it works seemlessly, however if I use a normal (non su) then I get the log in password screen pop up, but the desktop doesnt appear ir blinks and crashes. Tailin…

I got armbian installed on orange pi5 plus. in the orangepi distro, here's in the manual to open the HDMI in I can't find the options on armbian.

I have LicheeRV Nano (version B), which is a RISC-V computer with SOPHGO SG2002 CPU. Someone ported Debian onto it. The device acts as an "USB gadget" - when I connect it to my laptop through USB, it identifies itself as USB Ethernet device. This device is running RDNIS. However, when I connect this device to my Ubuntu laptop, I always get new network interface, with different IP (in range 10.42.0.0/24). For instance, once network interface is called "enx8a7df6c752e6", and it's MAC address is "8a:7d:f6:c7:52:e6". Next time it is called "enxd23862ad4ce9", with MAC address pa"d2:38:62:ad:4c:e9", and so on. The dmesg command on my Ubuntu lapto…

Hi, I'm using an old Odroid-C2 with Armbian as server with PHP/mysql as test setup for some communication and using a previous used php script to upload a photo which uses imagick for some resizing. The script is ok, I used it before on a different server. How do I install Imagick, it seems not to work using the installation method from source as mentioned on https://imagemagick.org/script/install-source.php Anyone experience with how to install it on armbian? Thanks a lot! JJS

Does anyone know how a do-release-upgrade affect an Armbian 24.8.3 installation? Had anyone upgraded to the 24.04.1 LTS release of Ubuntu? Any gotyas when upgrading? Things to do and things to avoid? What changes to allow and which to deny? I've done a release upgrade once, it took a long time and questions were asked and options presented suring the release upgrade process. Obviously I'll take an image of the MicroSD card before I even dream of attempting to use the do-release-upgrade.

Hi, The package torsocks wasn't working and I could not understand why it was not. Torsocks configuration file: /etc/tor/torsocks.conf (default) specifies port 9050 # Default Tor address and port. By default, Tor will listen on localhost for # any SOCKS connection and relay the traffic on the Tor network. TorAddress 127.0.0.1 TorPort 9050 So port 9050 should be visible with netstat, but it was not: $ netstat -at tcp 0 0 127.0.0.53:domain 0.0.0.0:* LISTEN tcp 0 0 127.0.0.54:domain 0.0.0.0:* LISTEN $ Then I tried to enable tor.service, but got an error: …

Getting an external IP address over network request as part of MOTD info is completle ruined ssh session start when board cant connect to desired server to get this address. It's get_wan_address function inside https://github.com/armbian/build/blob/main/packages/bsp/common/etc/update-motd.d/30-armbian-sysinfo . You can easy check this just by disable access to internet on you router and try to open new ssh session. After i mask this function call all worked well. Unfortunately i cant figure out how to send issue on GitHub due to redirect to some Google form, so there am i.

Hello guys! Firefox Homepage point to https://www.armbian.com. How can I change address of default page?

I have a old Armbian 21.08.1 Buster on a NanoPi NEO and I like to get it fixed. I can only see what is going on though the Serial port on it. It boots up with a lot of things missing. May guess is the swap on the SD card went bad years ago. I like to get this working again it was working real good back then till it did not boot any more. At the end of the boot on the Serial port it looks like this: [FAILED] Failed to start The Apache HTTP Server. See 'systemctl status apache2.service' for details. [FAILED] Failed to start OpenBSD Secure Shell server. See 'systemctl status ssh.service' for details. [ OK ] Started LS…

I have a k8s environment, where I am running 3 masters and 7 worker nodes. Daily my pods are in evicted states due to disk pressure. I am getting the below error on my worker node. Message: The node was low on resource: ephemeral-storage. Status: Failed Reason: Evicted Message: Pod The node had condition: [DiskPressure]. But my worker node has enough resources to schedule pods. Please help me resolve this issue

My system: armbian Ubuntu jammy 22.04 LTS (arrch64) ~/box86$ steam bin_steam.sh[3598]: Setting up Steam content in /home/john/.local/share/Steam steam.sh[3598]: Running Steam on ubuntu 22.04 64-bit steam.sh[3598]: STEAM_RUNTIME is enabled by the user setup.sh[3670]: Updating Steam runtime environment... /home/john/.local/share/Steam/ubuntu12_32/steam-runtime/run.sh: line 85: steam-runtime-identify-library-abi: command not found run.sh[9880]: steam-runtime-identify-library-abi --ldconfig-paths failed, falling back to ldconfig steam.sh[3598]: Couldn't find /home/john/.local/share/Steam/ubuntu12_32/steam-runtime/amd64/usr/bin/srt-logger, logging to …

hi all, i see that my board is not supported LinkStar-H68K-1432 V2 but i think the problem is general about gnome-remote desktop i have: uname -a Linux hinlink-h68k 6.1.75-vendor-rk35xx #1 SMP Fri Jul 19 14:49:03 UTC 2024 aarch64 aarch64 aarch64 GNU/Linux image: Armbian_community_24.5.0_trunk.389_h68k_desktop cat /etc/os-release PRETTY_NAME="Armbian 24.5.5 jammy" NAME="Ubuntu" VERSION_ID="22.04" VERSION="22.04.4 LTS (Jammy Jellyfish)" VERSION_CODENAME=jammy ID=ubuntu ID_LIKE=debian HOME_URL="https://www.armbian.com" SUPPORT_URL="https://forum.armbian.com" BUG_REPORT_URL="https://www.armbian.com/bugs" PRIVACY_POLICY_URL="https://www.armb…

I've installed docker on armbian https://dl.armbian.com/orangepi5-plus/Bookworm_vendor_minimal but I'm getting that error ``` août 24 12:43:08 user dockerd[1429]: time="2024-08-24T12:43:08.089479936+02:00" level=error msg="[resolver] failed to query external DNS server" client-addr="udp:172.18.0.12:40033" dns-server="udp:172.20.10.1:53" error="read udp 172.18.0.12:40033->172.20.10.1:53: i/o timeout" question=";test.in.domain.lan.\tIN\t AAAA" ```

I am learning kernel dtb stuff & I have made a custom image which performs good as far as NPU VPU are concerned. However, I am missing something because WIFI is not detected. Following are some required outputs. My Pi is v2.1 & its WIFI/BT is broadcom chipset Additionally, i tried install armbian-full-firmware as well OS: Armbian (24.8.0-trunk) aarch64 Host: Rockchip RK3566 OPi 3B Kernel: 5.10.160-rockchip-rk356x Uptime: 13 mins Packages: 1327 (dpkg) Shell: bash 5.1.16 Terminal: /dev/pts/0 CPU: (4) @ 1.800GHz Memory: 493MiB / 3922MiB $ sudo lshw -C network *-network description: Ethernet interface physical id: f …

Hello Since few days, base-files is missing from armbian repository for armhf arch apt-cache policy base-files base-files: Installé : 24.5.1-12.4+deb12u5-bookworm Candidat : 24.5.1-12.4+deb12u5-bookworm Table de version : *** 24.5.1-12.4+deb12u5-bookworm 100 100 /var/lib/dpkg/status 12.4+deb12u6 500 500 http://ftp.debian.org/debian bookworm/main armhf Packages On the armbian repository http://armbian.hosthatch.com/apt/pool/bookworm/b/base-files/ only arm64 is available. Is it normal ?

Hello I wanted to post on here regarding a new project we have been working on called SimpNAS. Its similar to OpenMediaVault or FreeNAS but simpler and more basic. Its currently in Beta but we are looking to have a stable release by the time Kobol ARM NAS gets released. It can be installed on armbian devices as long as it has two hard drives one for the OS and one for Data. For example we have it installed on an ODroid HC2, but can be installed on any PC. Feedback will be greatly appreciated.

Hi, After a fresh install of the stable Debian minimal/IOT image, creating the first user and switching to it, then installing the docker environment results in a non-functional docker. To be more precise everything seems to be running, only a few oddities, when installing docker, like being stuck on some steps (socket related) for way too long, then eventually carrying on and finishing with no errors... (instructions used to install docker) Also when the system reboots at least a minute has to pass with no CPU or any other observable utilisation for any docker container to automatically start. all of the above would be fine and I would chalk it…

At the beginning, can I directly use rk's burning tool to burn Armbian firmware??

I recently flashed armbian desktop for my raspberry pi 5 and I needed libcamera but it was missing. I tried most methods I could find but nothing worked. Any suggestions please.

hi, What is the meaning of “UBOOT_TARGET-MAP=” in Armbian？ What is its function？ What does it do? Can you explain? help,help…

About 2h ago most of APT repositories (probably in the mirror) became empty and I can't install packages anymore (both my desktop and CI runner): http://armbian.tnahosting.net/apt/dists/jammy/ is totally empty and most other releases as well.

Hello, I bought a card which has an SK6805 LED onboard (https://www.tindie.com/products/hallard/ethtinfo-tic-teleinfo-reader-for-ethernet-esp32/) and I'm wondering if there is a way to control it from my BananaPI IO-8 ? Thanks

Hi, i updated my Odroid HC2 to OMV7 following posts 29 and 30 from this thread https://forum.openmediavault.org/index.php?thread/51654-seemingly-cannot-update-and-upgrade-anymore-due-to-repository-having-no-release/&postID=383747#post383747 Actually looks like the update completed successfully, but i noted that connecting in ssh my motd looks wrong. Attaching it. I do not understand why it picks the VERSION_CODENAME "Buster" while i'm instead on "bookworm". Following scripts in /etc/update-motd.d : steakhutzeee@dk:/etc/update-motd.d$ grep VERSION_CODENAME /etc/os-release | cut -d"=" -f2 bookworm steakhutzeee…

Hello. I own a Orange Pi 5 Plus. This SBC has a RGB led and Armbian uses it to show the system load as a heartbeat blink. The problem is that the 3 colors are out of sync later than 15 minutes from boot. Is there a way to resync the 3 colors? Thanks.

How to setup printing on HamClock Ver 4.04. (armbian.com) Linux. I have been a Linux admin and none of methods work.

I tried to set armbian without networkmanager or netplan, with just ifupdown, isc-dhcp-client and wpasupplicant, but the wlan0 interface doesn't work as expected. IP Link Set WLAN0 Up doesn't want to set the interface to UP. With Network-Manager, the interface works correctly from the start. Do you have a solution to do without Network Manager and Netplan? I would just like to configure /etc/networkinterfaces like on my laptop. Thank you in advance for your answers

Has anyone able to install WPS Office on debian / ubuntu images? It's compatibilty with Microsoft Office is extremely high & is also available on Android. OrangePi has provided deb packages for ARM, anyone tried it? In there above GDrive link go to WPS folder

Hello, Has someone managed to make widevine work properly in armbian for any ARM64 board? I have a orange pi 5 plus board and I'm using armbian with the vendor kernel and I'm struggling to get widevine working without success. I've tried several online tutorials but none of them seem to work (but they also seem to be rather old).

Hi, I've just installed chromium on latest noble and some ffpg packages for. Unfortunately there are issues with Live Video Streaming, stucks and all green in between, None Live Videos seems to work better. It worked with the preinstalled firefox, unfortunately live video always stops after some minutes, while other stuff on websites around the videos continues. It's an rk3399 Board.

Just found this: source: https://blog.qualys.com/vulnerabilities-threat-research/2024/07/01/regresshion-remote-unauthenticated-code-execution-vulnerability-in-openssh-server source: https://arstechnica.com/security/2024/07/regresshion-vulnerability-in-openssh-gives-attackers-root-on-linux/ The vulnerability, which is a signal handler race condition in OpenSSH’s server (sshd), allows unauthenticated remote code execution (RCE) as root on glibc-based Linux systems; that presents a significant security risk. This race condition affects sshd in its default configuration. Are we affected running Armbian ?

I have a strange issue trying to update/switch kernel and installed header packages: when I open armbian-config > System > Other the tool loads 137 sources and then shows the warning by switching as expected but then returns to the "System Settings" menu without doing anything same issue when trying to install kernel headers - just doing nothing I worked around for now by manually install the required headers from https://mirrors.dotsrc.org/armbian-apt/pool/main/l/ but next time I do a apt upgrade this will byte me again. is there any log where I can see possible issues? Is there a way to check / fix the armbian-config set…

I ran an update on my orangpi PC2. Setting up armbian-zsh (24.5.1) ... cp: cannot create directory '/home/unifi/.oh-my-zsh': No such file or directory cp: cannot create regular file '/home/unifi/.zshrc': No such file or directory chown: cannot access '/home/unifi/.oh-my-zsh': No such file or directory chown: cannot access '/home/unifi/.zshrc': No such file or directory Witch is to be expected to fail, because that is a system user I accedentally gave an above 1000 UID Unifi is UID 1003, my regular user bedna (1000) is the owner of /home/bedna I don't mind, I don't use zsh anyway, but figured you would want to know about this. …

Hello, I have a 5.5" waveshare hdmi screen. For some reason it is blank on all my SBCs. Vim3, vim4 with armbian so far. It works perfectly for my Mac mini running Arch. I've tested cables and power. It has instructions for special settings to add to pi os' /boot/config.txt. Hdmi_force_hotplug=1 Among other things. Is it possible I need the same for armbian? Where would that go?

The default /. bashrc over rides any title or name setting set on the command line for all xterm and urxvt terms. This is very ugly and irresponsible behavior. I'm not sure where the source is kept but those lines of code need to be removed. Setting the prompt is one thing, smashing the title and name is something else.

hi, i upgrade my bullseye install to bookworm. Upgrade is ok. I Have this message on connection : Welcome to Armbian 24.8.0-trunk.122 Bullseye with Linux 6.9.3-edge-rockchip64 No end-user support: untested automated build &amp; unsupported (bullseye) userspace! /etc/apt/sources.list: deb http://deb.debian.org/debian bookworm main contrib non-free non-free-firmware #deb-src http://deb.debian.org/debian bookworm main contrib non-free non-free-firmware deb http://deb.debian.org/debian bookworm-updates main contrib non-free non-free-firmware #deb-src http://deb.debian.org/debian bookworm-updates main contrib non-free non-free-firmware deb …

Sorry for a n00b questions but I'm confused with Armbian version names 😀 1) I'm using an ARMhf board with a Jammy 6.6. I see ports.ubuntu.com in Apt log. But on which kernel is it based? On the Ubuntu website, I don't see a 6.6 kernel at all. Or is it a kernel from https://www.kernel.org? In armbian-config I see 6.1, 6.6, and 6.7 versions available for download, but all of them are also not listed on Ubuntu's website. Which is the most stable and recommended Armbian version to use? 2) Which version is the next after Jammy? Noble? On the Ubuntu website, I see v24.04, on the Armbian website I see v24.5. Why Armbian version is newer than …

I'm not sure where to report this. I think this is a common problem across distros for arm. I had this same problem with manjaro arm a month ago. On a fresh install of armbian. 24.3 cli. Emacs 28.x is available. It is missing a lot of elpa packages because of out of date gpg keys. It cannot find elpa.gnu packages. It is, for me, completely unable to load and use my emacs configuration. Package-initialize and package-refresh-contents do not fix it. I built the current emacs from source, it's version 29.3 and that works much better.

Can I get orange pi one ARMBIAN 5.34 version? We developed a product based on orange pi one ARMBIAN 5.34 and need to modify it but I can not find this version. Kindly let me know.

Guys i have an orange pi zero 3 4GB RAM version, with armbian ubuntu running currently with a static ip, and i have installed a vpn service on it and it works wonderfully, but it barely uses all the cores and the ram, so i was wondering about using some kind of virtual machine service like qemu-kvm, lxd or even docker to run virtual machines inside. I know many would say go for docker, although what i need is something closer to a VM than to a container, because i need these VMs to have their very own static ips connected to the network and isolated from the others yet able to send and receive traffic between them and the network, i have read that this kind of behav…

Hello, I have ZFS installed, today there was an update, in which I no longer have ZFS. root@msrv 49.00℃ :~# apt dist-upgrade Reading package lists... Done Building dependency tree... Done Reading state information... Done Calculating upgrade... Done The following packages were automatically installed and are no longer required: libnvpair3linux libuutil3linux libzfs4linux libzpool5linux Use 'apt autoremove' to remove them. The following packages will be REMOVED: zfs-zed zfsutils-linux The following packages have been kept back: libnvpair3linux libzfs4linux The following packages will be upgraded: libuutil3linux libzpool5linux zfs-dkms 3 upgraded, 0 ne…

Hello! Is there a way to install a hyprland wm? Additional debian hyprland repo is for x86 only, right?

Basic tool to change screen orientation and its touch input on gnome wayland desktops. Built for Gnome Wayland and displays without automatic touch input rotation after orientation change. Sadly xrandr and xinput are things of the past in times of wayland. And since I mounted a FHD touchscreen to my rock-5b which can be rotated, this caused some trouble for me. Mabye useful fur other people mounting displays with touch support on their SBC's in crazy spots 😛 Basically it's just a combination of gnome-randr.py and creating a udev rule with calibration matrix. Fun project to test out chatGPT 😀 https://github.com/fraz0815/gptouch

Hi all, I have a Nano Pi Core 5.15.74-sunxi system with Focal OS on it. Now I see that files on http://apt.armbian.com for Focal have 0 size. Is there any way to update the kernel without reinstalling the OS from scratch, are any mirrors or archives available? Tnx

I need to install some stuff on armbian system, which is installed on SD card and it runs on Orangepi PC board. It includes some sripts, Python libraries, etc and some of them require to be compiled on the fly, and it takes several hours when running on Orange PI. So my idea is to mount SD card on PC and run/chroot into installed system with qemu on Linux. So I will get much better performance and all neccesary steps will be performed much faster. Is it even possible to do that? After installation finishes, SD card will be again used to operate on OrangePI PC board.

Hi, I built a NAS with a Raspberry PI. It runs ARMBIAN 5.46, a SAMBA server and an NFS server. There are also 5 disks that are combined as RAID5. Since yesterday I can no longer log in, neither via SSH nor directly on the Raspberry Pi. When I try via SSH, I get the password query, the start message about the current status and then the connection is closed. When I log in directly to the system, I get the login query (username and password) and then the message "Module is unknown". Then the login request comes again. What can I do without reinstalling the system? Thanks for the help. Jens

Hi all, I decided today to give an Armbian build a whirl as a virtual machine (guest). In particular, Armbian_24.2.4_Uefi-x86_jammy_current_6.6.21_kde-neon_desktop.img. As is usual with installing a virtual machine, it comes up with a default video resolution of 1024x768; I can usually quickly get it full screen on my system as 1920x1080 by going to the System Settings : Hardware : Display and Monitor : etc. However, here there is no hardware subsection at all, and a search didn't turn up a setting to change the display. Any advice on where to find it? I installed the spice guest driver and related packages on the guest. …

Hello. I'm trying to disable Network-Manager to only use isc-dhcp-client and control network settings via /etc/network/interfaces But whenever I disable or delete Network-Manger and install isc-dhcp-client. After restarting the device it loses communication with the network. Follow the data: Device: nanopi core Armbian Bookworm Kernel 6.6.28 How I have done the procedure: apt purge network-manager apt install isc-dhcp-client echo "extraargs=net.ifnames=0" >> /boot/armbianEnv.txt cat << EOF > /etc/network/interfaces auto lo iface lo inet loopback allow-hotplug eth0 iface eth0 inet dhcp EOF

I have an OrangePi PC with armbian installed on it. Today, probably because of my stupidity, the board couldn't boot after upgrading a bunch of stuff. When I opened the sd card on my pc, I found that there were no kernel files in /boot and there were broken symlinks. I tried to replace these with the files from the current minimal image armbian is available for the board, but encountered a UUID mismatch. I then used files from a september 2021 backup, which did allow me to boot into a functional system. It had Linux 5.10.43-sunxi. But before my attempts to fix the issue, my system had Linux 6.1.11-sunxi installed, so I am concerned about this mismatch and would like to sa…

$ gpg --keyserver hkp://keyserver.ubuntu.com --recv-key DF00FAF1C577104B50BF1D0093D6889F9F0E78D5 gpg: key 93D6889F9F0E78D5: 1 duplicate signature removed gpg: key 93D6889F9F0E78D5: public key "Igor Pecovnik <igor@armbian.com>" imported gpg: Total number processed: 1 gpg: imported: 1 graeme@NUC:/net/nas/Public/Reference/Computer/OrangePi$ ls Armbian_community_24.5.0-trunk.474_Orangepi4_bookworm_current_6.6.28_minimal.img.xz Armbian_community_24.5.0-trunk.474_Orangepi4_bookworm_current_6.6.28_minimal.img.xz.asc Armbian_community_24.5.0-trunk.474_Orangepi4_bookworm_current_6.6.28_minimal.img.xz.sha $ gpg --verify Armbian_community_24.5.0-trunk.474_Orange…

I have ntpsec setup s a stratum 2 server on this machine I'm no ATM, basically to lighten the load on the distros servers and its being used by most of my machines here. I'm bringing up, slowly it seems, another 3d printer with a bpi-m5 as the front end for the klipper driver. I have followed the directions in /etc/chrony/sources.d/README to add that file, pointing chrony at this machine for its time reference. Restarting /etc/init.d/chrony geenerates an ok response from systemctl status: Feb 13 14:56:03 bpi51e5p systemd[1]: Starting chrony, an NTP client/server... Feb 13 14:56:03 bpi51e5p chronyd[5277]: chronyd version 4.2 starting (+CMDMON +NTP +REFCLO…

I think I have everything setup, nm even says its connected, but isn't. With about 15 entries in FQDN format in the /etc/hosts file, and the hostname set to whats before the first dot of one of the entries, ip a still doesn't show an ipv4 address. and ip r is an empty return. What all do I need to set?, it all looks kosher to me.

Hi there, I am trying to blacklist a module by adding 'blacklist rtl2832_sdr' to /etc/modprobe.d/rtl2832_sdr.conf I follow this by issuing 'update-initramfs -u' and rebooting. This is a standard way of doing things on Linux, yet somehow all of the modules continue to show up. System is up to date, running on Orange Pi Zero 3, if that matters. I expect this is a bug of some sort, since I saw it mentioned elsewhere here in the forums that this is the way to go, too?

i have 2 USB LTE modems (quectel ec25) and i most of the time i get "wwan0" (modem 0) and "wwan1" (modem 1) network interface names, but sometimes they switch to "wwan0" (modem 1) and "wwan1" (modem 0), sometimes i get "wwx*" interface name on one of them and "wwan1" on the other, this is very sad ;(. How can i get "wwx*" for both of them? modems are connected after the system is already started im using latest jammy cli image on opi zero, the only thing i did is installed "modemmanager" and created 2 gsm connections in networkmanager

Hello, I encounted an issue with chromium. By default, armbian has PSD (profile-sync-deamon) enabled, and when chromium started, it links the profile dir (~/.config/chromium) to /run/user/1000/chromium-user However, it breaks the cookies. If I reboot the box, and start chromium to visit a website I logged in, the login session was lost. I took me much time to understand the reason, finally I found it's the symbolic link. The temp solution for me is that I disabled the psd service, and the profile directory won't become a symbolic link. Now it works well. Next, I tried to find if it is psd or the symbolic link. I copied the profil…

Hello Can I use armbian on the hp t620? The windows os needs so much resources Thank for your help

Hi all, Only just found out about Armbian. Looks really useful. Want to use an Orange Pi Zero 3 for Pihole with Unbound and Pivpn. However, i haven't found an answer for when you would use one distro over the other. Also which is what in the download listings? Thank you.

Hi guys! The armbian-base-files hasn't been generated since v23.11.1 (Beta repositories) which is crippling new versions for bullseye users any plan to generated it again ? Thanks ! https://github.com/armbian/build/pull/5192 https://forum.armbian.com/events/event/33-weekly-developers-meetup/?do=findComment&comment=48

Orange pi Zero 2 Armbian 24.2.1 Bookworm CLI never shows armbian-config after first restart I tried loading the sd card multiple times. However, as soon as the linux board is restarted it does not go ahead with this command "sudo armbian-config" The cursor goes to next line.Only if i press ctrl+c it goes back to the prompt.

Hello, I bought 2 nanopi neo plus 2 and when I search for a compatible armbian, I only found a bullseye here https://fi.mirror.armbian.de/archive/ But I have problems with apt, I need to install some python stuff but I always got errors : Reading package lists... Done Building dependency tree Reading state information... Done The following additional packages will be installed: libpython3-stdlib python-pip-whl python3 python3-distutils python3-lib2to3 python3-minimal python3-pkg-resources python3-setuptools python3-wheel Suggested packages: python3-doc python3-tk python3-venv python-setuptools-doc Recommended packages: build-essential python3-dev…

I am about ready to shoot my want to be server. I have an Ubuntu samba server running a public share on my LAN. The share has no username or password required to make it windows friendly. No other system has issues accessing it. I have a new ROCK64 running Armbian 23.11.1 Bookworm CLI. It will not mount a CIFS share at boot, but will mount it with a mount -a command. Fstab entries that have not worked: //192.168.15.150/15tb_NAS/Data/ /mnt/NAS cifs rw,user=,password=,file_mode=0777,dir_mode=0777,async,x-systemd.automount 0 0 //192.168.15.150/15tb_NAS/Data/ /mnt/NAS cifs vers=3.0,rw,user=,password=,file_mode=0777,dir_mode=0777,asy…

I'm working on arambian 5.8.5-sunxi I'm building a kernel module and I need linux-headers-5.8.5-sunxi This version is not in the repositories. I installed linux-headers-5.8.0-sunxi, my module is built, but does not start. I can’t update kernel version 5.8.5 to a new one, because I’m using a 2000 OrangePi PC Plus device Where can I find the linux-headers-5.8.5-sunxi package?

At this moment fails on ARM Cortex-A53 and Cortex-A55, works on RISC-V 64. wget https://downloads.xiph.org/releases/opus/opus-1.5.1.tar.gz tar -xf opus-1.5.1.tar.gz cd opus-1.5.1 sudo apt install autoconf automake libtool gcc make ./configure sudo make install This version brings non-marginal improvements for spoken content at low bitrate.

What ever I try I get Ign or Errors. Happens also on all Pi4's that had been working for years as well as for a new install I am attempting using Armbian_24.2.1_Rpi4b_jammy_current_6.6.16_xfce_desktop.img.xz root@rpi4b:/etc/apt# apt --allow-unauthenticated upgrade Reading package lists... Done Building dependency tree... Done Reading state information... Done Calculating upgrade... Done The following packages have been kept back: gir1.2-gdm-1.0 iptables libgdm1 libip4tc2 libip6tc2 libxtables12 The following packages will be upgraded: coreutils gir1.2-javascriptcoregtk-4.0 gir1.2-webkit2-4.0 libjavascriptcoregtk-4.0-18 libwebkit2gtk…

My TV is being weird. I adjusted the taskbar so it’s not off screen, although I didn’t think about the minimize/maximize/etc being cut off. I tried looking around for a solution but didn’t find topics with solutions that worked. My TV is funky and doesn't have a video adjustment menu, so I can’t do that. And the resolutions available are supposed to be supported by my tv. Am I able to set screen boundaries, like a screen safe area so the display is not cut-off? If it’s not possible, it would make a nice feature.

Hello, I am a new user and have downloaded Armbian on LePotato AML-S905X-CC. I am looking for a way to get Firefox to start up in kiosk mode with a specified website, but can't seem to do it. Does anyone know how I can get Firefox to start up in kiosk mode with a specified website?

armbian-bsp-cli-odroidc2_24.2.1_arm64__1-PC13d1-Vf2bb-H02fb-Ba537-R6632.deb is available in the package list but the actual .deb file is missing on the server, which causes apt upgrade to fail with HTTP 404. This happens to lots of mirrors.

Hi All, Current running a RockPi4C+, it has crashed after a dist-update (it seems that uboot update not recognize my nvme), then, I reinstall it, on SD card only , but only found a community rolling version, And, now that my system is booting, I want/need to go back to stable, I read about armbian-config to do that, but not enable on RockPi4C+ What is the "cli" way Thank you

Hello, this is weird. With armbian 23.8.1 I can access the gpio-pins of the raspberry 4b. With (current) armbian 24.2.1 neither wiringpi (gpio -v) works nor any direct access (like echo "4" > /sys/class/gpio/export) The only difference I can find is the version of armbian. Please give me a hint on how to get gpio-access working with the current armbian. THX Edit: with raspbian it works (echo "4" > /sys/class/gpio/export and cat /sys/class/gpio/gpio4/value), so apparently I used the correct method.

It seems to me that the mesa packages that Armbian provides are broken, but I see no mention of this anywhere so maybe it's something I'm doing? I'm using an Orange Pi Zero 3, which I believe is experimental but I don't see any evidence that the packages of interest are specific to this board. It looks like Armbian provides a new version of libgl1-mesa-dri that relies on a newer version of libdrm-amdgpu1 than what is available in the default debian bookworm repo: ben@orangepizero3:~$ sudo apt-get install libgl1-mesa-dev Reading package lists... Done Building dependency tree... Done Reading state information... Done Some packages could not be installed. This…

How to get linux-headers for my current kernel? I use Odroid XU4. After install last version of Armbian (24.2.1 Jammy XFCE Desktop) I do sudo apt-get update && sudo apt-get upgrade -y After I try to install headers $ sudo apt-get install linux-headers-$(uname -r) Reading package lists... Done Building dependency tree... Done Reading state information... Done E: Unable to locate package linux-headers-6.1.77-current-odroidxu4 E: Couldn't find any package by glob 'linux-headers-6.1.77-current-odroidxu4' E: Couldn't find any package by regex 'linux-headers-6.1.77-current-odroidxu4' But there is no my version. Why? There is full list…

Was using a 5.15.x version of Arabian on an orange pi 4, and upgraded to latest 6.7.x image seems to have broken low level usb (specifically USB to ACM devices). Used the following command to reset an STM32 device over USB (stm32 is connected directly to USB and shows up as a ttyACM0 device in linux) python -c 'import termios; termios.tcsendbreak(3, 0)' 3>/dev/ttyACM0 this worked great but now no longer does. Any ideas? Anyway we can test if its an updated driver issue by reverting to older usb driver or possible a kernel issue? Seems to be a Armbian specific issue, since ubuntu on amd64 system with 6.x kernel works fine …

Hello i use octoprint on my orange pi with armbian. Now i want to get multiple octoprint instances. so i use docker. i found many tutorials in the web The problem: i need to set udev rules for my usb connection of each 3d printer. I found many tutorials too. But my quesstion: can i detect the usb infos from the usb connection, when i use a usb port and connect the printer? Does udev_rules works with passive and active usb hub? Cause i would prefer to use a passive usb hub thank you

I am trying to stream multiple USB cameras in Orange pi 5+, but I am getting the error: ffmpeg -f v4l2 -input_format mjpeg -video_size 640x480 -i /dev/video3 -c:v copy output2.mp4 # One process successfully started, but calling this a second time doesn't work: ... [video4linux2,v4l2 @ 0xaaab1ddcdbc0] ioctl(VIDIOC_STREAMON): No space left on device /dev/video3: No space left on device dmesg displays this: [696321.331182] usb 5-1.3.2: Not enough bandwidth for new device state. [696321.331189] usb 5-1.3.2: Not enough bandwidth for altsetting 7 I initially assumed that this was a hardware issue, but the device is able to successful…

Armbian is installed from Armbian_23.11.3_Rpi5b_bookworm_current_6.1.68_cinnamon_desktop.img. I installed xrdp and then created the remote user and added it to xrdp group. When checked the xrdp status seems fine. When I try to connect I just get an empty blue screen on a Windows RDP screen Rechecking the xrdp status gives: After delay of minute or so a 'connection log' window appears RDP client screen, saying Rechecking the xrdp status gives: I have a Rasperry PiOS Bullseye on a RPI4, with working xrdp. I have compared all the configuration files between the rpi5 and the rpi4. They are the same (except the rsakeys…

it's in regular ubuntu 22.04 for arm but not there, why?

Odroidn2+ with eMMC card flashed with latest Armbian 23.5 Jammy XFCE (Armbian_23.5.1_Odroidn2_jammy_current_6.1.30_xfce_desktop) Having issue installing firefox. Chromium was already installed properly. During the installation of firefox, the system remains waiting for something. When eMMC flashed with Armbian_23.5.1_Odroidn2_jammy_current_6.1.30_xfce_desktop testhost@odroidn2:~$ uname -a Linux odroidn2 6.1.30-meson64 #8 SMP PREEMPT Wed May 24 16:32:53 UTC 2023 aarch64 aarch64 aarch64 GNU/Linux testhost@odroidn2:~$ lsb_release -a No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 22.04.2 LTS Release: 22.04 Codena…

I am using the latest Armbian Noble image (version 6.6.8) on my Banana Pi CM4. For my application, I am utilizing the Linux UART (/dev/ttyAML0), which is currently printing dmesg logs on this port. Is there a way I can disable dmesg debug logging and exclusively use /dev/ttyAML0 for my application? Thanks.

Hi all, I'm quite puzzled by this. I installed iptables-persistent to be able to restore the iptables rules at start-up. Saved the rules to /etc/iptables/rules.v4 / /etc/iptables/rules.v6, then rebooted. But after boot, the iptables are empty. Looking at the status of service netfilter-persistent, it looks like it has ran the scripts to restore the rules: root@gateway:/etc# systemctl status netfilter-persistent.service ● netfilter-persistent.service - netfilter persistent configuration Loaded: loaded (/lib/systemd/system/netfilter-persistent.service; enabled; preset: enabled) Drop-In: /usr/lib/systemd/system/netfilter-persistent…

Hi guys, i'm running transmission-daemon 3.00 on my orange pi 5 where there is installed Armbian based on ubuntu jammy. It works fine, but recently i've reached the number of 78 torrents that i'm downloading and seeding, i do not think it's an high number of files shared. Anyway after some hours that i start transmission-daemon i do not know the reason, it seems that is not downloading and seeding anything. I mean that the interface and the process are running and active but every torrent file it seems freezed. If i restart the process, everything start to work properly. I'm not an expert, if someone can tell me how to gather the logs i can share with you more inf…

I take regular backups from my linux boxes (rsyncing the file system). To resume, I boot from usb, copy the files to the disk of the box and then make it bootable by chrooting into the box and executing grub-install or update-grub. That works fine. But how can I do this on my odroid hc2 running armbian/bullseye? I cannot boot from usb. So I need to make the sd card bootable on my debian-amd64 pc after copying the files on it. Is there some command like "update-uboot" I can execute on amd64? Or do I need a virtual host running arm architecture to do so? Jüregen

I did install an apt install nfs-kernel-server nfs-common on my bananaPi M1. I did export some dirs and successfully mounted them from my clients. After a reboot the mounts did not work. Then I manually invoked exportfs -a and the client were able to mount. What is the correct way to get the nfs server started after a reboot?

I have WordPress on the: _ _ ____ _ _ _ | \ | | _ \(_) | \ | | ___ ___ | \| | |_) | | | \| |/ _ \/ _ \ | |\ | __/| | | |\ | __/ (_) | |_| \_|_| |_| |_| \_|\___|\___/ Welcome to Armbian 23.02.2 Buster with Linux 5.15.93-sunxi No end-user support: untested automated build & unsupported (buster) userspace! System load: 86% Up time: 2 min Memory usage: 57% of 491M Zram usage: 18% of 245M IP: 192.168.86.91 CPU temp: 41°C Usage of /: 3% of 116G RX today: 10.7 MiB Last login: Wed Jan 10 17:09:36 2024 from 192.168.86.95 I uninstall…