Software, Applications, Userspace

I tried https://imola.armbian.com/beta/pool/main/l/ and apt search, but there was no suitable packages for my devices.

I tried to install OMV on Orange Pi 5 Pro with Armbian Community but it say can't. Is it still possible to install it?

Hello, I am trying to have a graphical login screen for my orange pi zero 3 with ili9488 LCD screen. A problem I have is that X11 can't start with the LCD driver... so I need to stay 100% wayland. I was able to compile and run labwc with these instructions: https://forum.armbian.com/topic/53797-labwc-wayland-crashes-on-exit/#findComment-223267 Labwc runs well on a HDMI screen and in the small ili9488 screen Next, I found this graphical login, which is made to install on top of lightdm: https://github.com/raspberrypi-ui/pi-greeter/tree/master Compilation rerequisites: sudo apt install gobject-introspection libgtk-…

How to make a read protection on eMMC? That nobody can read emmc data exept me.

I take regular backups from my linux boxes (rsyncing the file system). To resume, I boot from usb, copy the files to the disk of the box and then make it bootable by chrooting into the box and executing grub-install or update-grub. That works fine. But how can I do this on my odroid hc2 running armbian/bullseye? I cannot boot from usb. So I need to make the sd card bootable on my debian-amd64 pc after copying the files on it. Is there some command like "update-uboot" I can execute on amd64? Or do I need a virtual host running arm architecture to do so? Jüregen

Hej, Microsoft has recently announced a new release of the dotnet version 7. I just wanted to guide how to get it running on armbian. It is actually pretty straightforward and takes only few steps. if you have any previously installed dotnet runtime - rm it. First things first, lets get the right package from the site: https://dotnet.microsoft.com/en-us/download/dotnet/7.0 from here download arm32/64 version (I ll go with arm32) wget https://download.visualstudio.microsoft.com/download/pr/61cb6649-f41f-4966-84ae-9ff673528054/9bbd07607c5a1af87354e1fa93c36a00/aspnetcore-runtime-7.0.0-linux-arm.tar.gz run ls, …

How to mount a usb hard disk drive? I’m trying to set a NAS-like system on a TvBox. Share an HDD over samba. https://paste.armbian.com/xuvobugato

So I need to know what I have to do to get MIDI messages into my music app that I'm working on. I developed a cli synth app on Manjaro using SDL3 and Jack. Jack I used to connect to MIDI aka 'MIDI-Bridge' or MIDI Through and an external program to produce MIDI messages sent to MIDI Through. I am currently trying to do the same on the actual device I wish to use which is the OrangePi 4 LTS I have spare with just bare bones Armbian Server, no desktop. I have audio working through Pipewire. I am used to Jack just being available because Pipewire intercepts and handles the calls behind the scenes. I noticed that on Armbian I think I have to use the 'pw-jack' program or jack-p…

I have connected Orangepi AI lite stick to Orange pi 4 both of this have NPU in it . I want to know how to make sure on which NPU it is running or is there any flag to set

How to upgrade armbian from 23.02.2 to 23.5? Shoud I reinstall the os with 23.5 image ? Thanks

At this moment fails on ARM Cortex-A53 and Cortex-A55, works on RISC-V 64. wget https://downloads.xiph.org/releases/opus/opus-1.5.1.tar.gz tar -xf opus-1.5.1.tar.gz cd opus-1.5.1 sudo apt install autoconf automake libtool gcc make ./configure sudo make install This version brings non-marginal improvements for spoken content at low bitrate.

The release blog for Suni mentioned Fast and Safe Updates Is this referring to the streamlining of the apt-get or apt packages, or is there a new update to be used? I looked through the release notes and other sources and couldn't find anything. https://www.armbian.com/newsflash/armbian-23-05-suni/ Fast and Safe Updates: Our streamlined system allows for fast and safe updates, ensuring that users can easily stay up to date with the latest improvements and security patches.

Hardware video decode in "Google Chrome". I will start this out with "It flickers on a 16GB board. I can use it to play High Resolution YouTube Videos." YMMV! Test Note: I run it at 4k@120hz on my Pi-Desktop build. # HOW-TO: Hardware video decode in Google Chrome on RK3588 (Orange Pi 5B / Ubuntu-rockchip BSP) This gets Google Chrome to decode video on the RK3588 hardware VPU (via VA-API) instead of grinding it out on the CPU. Result: smooth 1080p and 4K playback with the CPU nearly idle. Codecs that decode in hardware: H.264, HEVC, VP8, VP9. (No AV1 - see Problems and Fixes.) As a bonus, the same driver also gives Firefox hardware decode. …

Hello, While testing adding efuse_xlate to extract the efuse version for h616 'opiz2' so that h6 and h616 can coexist, found the following with htop. Issue raised with: htop 2.2.0 aborting. Please report bug at http://hisham.hm/htop >>>> pointed me back here. Please have a look and let me know if help needed. Thanks, Alistair Welcome to ARMBIAN! Documentation: https://docs.armbian.com | Community: https://forum.armbian.com IP address: 10.0.0.14 Create root password: ******* Repeat root password: ******* Shell: BASH Creating a new user account. Press <Ctrl-C> to abort Please provide a…

Hello! Is there a way to install a hyprland wm? Additional debian hyprland repo is for x86 only, right?

I have a old Armbian 21.08.1 Buster on a NanoPi NEO and I like to get it fixed. I can only see what is going on though the Serial port on it. It boots up with a lot of things missing. May guess is the swap on the SD card went bad years ago. I like to get this working again it was working real good back then till it did not boot any more. At the end of the boot on the Serial port it looks like this: [FAILED] Failed to start The Apache HTTP Server. See 'systemctl status apache2.service' for details. [FAILED] Failed to start OpenBSD Secure Shell server. See 'systemctl status ssh.service' for details. [ OK ] Started LS…

Just did a fresh install of latest Ubuntu 26.04 Gnome build on a Pine Quartz64 A board. After an `apt update` running `apt upgrade` tries to update the `linux-libc-dev` package, which is downloaded from `ports.ubuntu.com`. However it consistently fails with a 404. Digging around a little, it seems like this package should match the kernel that's in use, so is the underlying problem that `apt` is trying to download it from the ubuntu repo instead of the armbian one where the kernel package comes from? I have not modified any apt configuration since installing.

I need a USB imager with offline installation to run on armbian. So not amd architecture. Just one to install on armbian.

2 Claudes 5 Agents, diff'ing, searching and boom we found it. "A subtle bug the vendor introduced and nobody upstream has fixed, in code you already live in. The RK3588 VOP2 port copied RK3568's layer-latch mechanism but dropped the one wait that makes it work — and mainline sidesteps the whole thing in hardware, so no one's ever going to fix it in the BSP but you. Be honest on confidence: the code defect is register-confirmed (high); that it's the flicker rests on the mutter-direct-scanout inference (medium) — which is exactly what the MUTTER_DEBUG=disable-direct-scanout test nails in two minutes." HW Acceleration came back, Address bars and Search bars se…

I've spent a couple of days googling and "all the AI'ng" this and I just can't find anything that will get my Orange Pi 5 or Orange Pi 3 Zero Pin 3 or 5 to do anything at all. First, I'm running: v25.2.3 for Orange Pi 5 running Armbian Linux 6.1.99-vendor-rk35xx (similar for the zero) $ ls /dev/i2c* /dev/i2c-0 /dev/i2c-10 /dev/i2c-2 /dev/i2c-6 /dev/i2c-7 /dev/i2c-9 $GPIO readall SDA.5 | IN | 3 SCL.5 | IN | 5 (it says OFF on the zero) $sudo i2cdetect -y 2 0 1 2 3 4 5 6 7 8 9 a b c d e f 00: -- -- -- -- -- -- -- -- 10: -- -- -- -- -- -- -- -- …

im trying to figure out how to install balena etcher and install to internal emmc and have it boot from there and how to install hardware accelerated drivers

I used armbian-config to install immich but web interface not reachable. Checking docker -ps -a it seems immich is running. thank you

Can you include the wireguard module in the kernel, please? It's missing from Armbian 23.05.0-trunk Bullseye with Linux 5.4.239-odroidxu4. This is a required module for the Openmediavault Wireguard Plugin to install correctly (using OMV 6.4.9-1 (Shaitan)) However I'm told that omv 6 requires Debian 11 Bullseye so, if there's an existing Armbian build with it, can you let me know, please?

Hi, i updated my Odroid HC2 to OMV7 following posts 29 and 30 from this thread https://forum.openmediavault.org/index.php?thread/51654-seemingly-cannot-update-and-upgrade-anymore-due-to-repository-having-no-release/&postID=383747#post383747 Actually looks like the update completed successfully, but i noted that connecting in ssh my motd looks wrong. Attaching it. I do not understand why it picks the VERSION_CODENAME "Buster" while i'm instead on "bookworm". Following scripts in /etc/update-motd.d : steakhutzeee@dk:/etc/update-motd.d$ grep VERSION_CODENAME /etc/os-release | cut -d"=" -f2 bookworm steakhutzeee…

I am using Armbian bullsyee on OrangePı3 LTS I would like to install and run exe files on armbian bullsyee I've installed box86 and box64 with wine/wine32 to armbian Eveythings seems ok but when I try to run exe files but it does not run Sometimes armbian is blocking without any alert Could you please advice me concerning How can I install and run exe files on armbian Thankyou for your kindly help

I can't figure out how to install the tar.gz file for java. I can't figure out how to run it. How do you do this?

Installed 24.8.4 on OrangePi Zero2. Assumed I would need to install neofetch to launch it, so didn't even try to run it before going straight to 'apt install neofetch'. On attempting to install, I saw the following: Reason is that armbian-config package includes /usr/bin/neofetch. To avoid confusion for new users, it seems like it would be good to either have armbian-config depend on neofetch instead of including the bash script that that package includes*, or have the Package file for armbian-config lock out the installation of neofetch (I think the Provides, Replaces, and Conflicts directives might be needed for that). I had a look around the https:/…

Hi, I am new here. I have an issue I run my printer via Klipper and a bananapi. But I made the mistake of updating now I need python 3.7. and I have trouble installing it cause: sudo apt-get install python3.7 fails with The following packages have unfulfilled dependencies: python3.7 : depends on: python3.7-minimal (= 3.7.5-2ubuntu1~18.04.2) but 3.7.16-1+bionic1 should be installed Depends on: libpython3.7-stdlib (= 3.7.5-2ubuntu1~18.04.2) but should not be installed E: Problems can't be fixed, you have held back broken packages. the question is how can I fix this issue. Or at least can someone point me in the right direction…

Hi all, I'm quite puzzled by this. I installed iptables-persistent to be able to restore the iptables rules at start-up. Saved the rules to /etc/iptables/rules.v4 / /etc/iptables/rules.v6, then rebooted. But after boot, the iptables are empty. Looking at the status of service netfilter-persistent, it looks like it has ran the scripts to restore the rules: root@gateway:/etc# systemctl status netfilter-persistent.service ● netfilter-persistent.service - netfilter persistent configuration Loaded: loaded (/lib/systemd/system/netfilter-persistent.service; enabled; preset: enabled) Drop-In: /usr/lib/systemd/system/netfilter-persistent…

Dear all, sorry if it's a stupid question 😉 ... I successfully install armbian on my SBC (in fact a TV box) for amlogic https://www.armbian.com/amlogic-s9xx-tv-box/ I install this one: Armbian_community_25.5.0-trunk.4_Aml-s9xx-box_bookworm_current_6.12.12.img.xz I use armbian-config / section "software" to add some 3rd party software, and it works very well The choice in the "software" section is limited on my setup, and when I look at the source code (main branch) here https://github.com/armbian/configng/tree/main/tools/modules/software I see more software available.... Is it possible to upgrade only "armbian-co…

I read about Debian/Ubuntu, that — as the Armbian — in general have all sorts of UTF-8 locales installed by default, it is possible to generate ISO8859-2 locales anyway by using a 'locale-gen' tool (found such suggestion here ). But there isn't locale-gen in Armbian, it seems (Armbian v25.2.2). Can it be installed from some repo, or maybe it's possible to generate ISO8859-2 locales some alternative way? If so — how do i do that?

Is it possible to plug in a phone via USB to use its hotspot? Like windows/mac, you can plug in your phone via usb and use its hotspot through a usb cable. Is that possible instead of using an ethernet cable?

Armbian uses Netplan by default to manage network settings. But when it uses NetworkManager as renderer, it silently changes iptables rules—without asking, without telling. *Neither Netplan nor NetworkManager are supposed to manage firewall settings.* But they do it anyway, behind the scenes. That kind of behavior—making security changes without user consent—feels a lot like what malware does.

I just bought this PINE64 board. I flashed the ARMbian GNOME Desktop OS image into an SD card, in order to boot into the board. I already tried to set up an OpenVPN server using this guide (tested with another Ubuntu machine, it worked) but for some reason this does not work using the PINE64 board. All the steps seems to complete successful and the VPN server seems to be up and running, passed the ovpn file to the client user but when the user try to connect to the VPN network the log messages from the VPN client always said "Server poll timeout..." and, of course, the connection never happen. Which could be the problem? Am I missing something for this set up ?

I installed "Armbian 23.8.3 bookworm" to Odroid HC1. Installation was OK, it boots. Armbian is installed on microSDHC card. I wanted to format SATA drive with XFS but I cannot mount it. 1) I installed xfsprogs (apt install xfsprogs) $ dpkg -la | grep xfs ii xfsprogs 6.1.0-1 armhf Utilities for managing the XFS filesystem 2) I created GPT partition table on SATA drive and I created one partition, /dev/sdb1 # fdisk -l /dev/sdb Disk /dev/sdb: 1.82 TiB, 2000398934016 bytes, 3907029168 sectors Disk model: Generic Units: sectors of 1 * 512 = 512 bytes Secto…

I am trying to stream multiple USB cameras in Orange pi 5+, but I am getting the error: ffmpeg -f v4l2 -input_format mjpeg -video_size 640x480 -i /dev/video3 -c:v copy output2.mp4 # One process successfully started, but calling this a second time doesn't work: ... [video4linux2,v4l2 @ 0xaaab1ddcdbc0] ioctl(VIDIOC_STREAMON): No space left on device /dev/video3: No space left on device dmesg displays this: [696321.331182] usb 5-1.3.2: Not enough bandwidth for new device state. [696321.331189] usb 5-1.3.2: Not enough bandwidth for altsetting 7 I initially assumed that this was a hardware issue, but the device is able to successful…

Hi, I've just loaded armbian on a SBC and the first thing I went to do was apt update apt upgrade apt install neofetch However when I went to run neofetch, I had the following error bash: fastfetch: command not found After installing fastfetch with apt, it worked as expected.

Armbian is installed from Armbian_23.11.3_Rpi5b_bookworm_current_6.1.68_cinnamon_desktop.img. I installed xrdp and then created the remote user and added it to xrdp group. When checked the xrdp status seems fine. When I try to connect I just get an empty blue screen on a Windows RDP screen Rechecking the xrdp status gives: After delay of minute or so a 'connection log' window appears RDP client screen, saying Rechecking the xrdp status gives: I have a Rasperry PiOS Bullseye on a RPI4, with working xrdp. I have compared all the configuration files between the rpi5 and the rpi4. They are the same (except the rsakeys…

OK, so it actually was cold in FL for a couple weeks and I did a power hack. I ported Java UIO to Java UIO 2. Java UIO (HawtJNI) This was the "Old School" high-performance approach. It relied on a custom C wrapper and JNI to bridge the gap. How it works: You have to write a C helper file, compile it into a shared library (.so) for on ARM architecture (armv7l, aarch64), and bundle it in your JAR. The Overhead: Every call from Java to C has a "JNI transition cost." To minimize this, you used moveJavaToNative to bulk-transfer buffers, which added complexity to the Java code. Java UIO 2 (FFM / Project Panama) T…

https://github.com/sgjava/javauio2 Java UIO 2 is the next-generation evolution of the Java UIO project, rebuilt from the ground up to leverage the Foreign Function & Memory API (FFM). By moving beyond traditional JNI, Java UIO 2 achieves unprecedented performance and hardware-level accuracy for Linux Userspace IO. Engineered for JDK 25, it provides a cutting-edge cross-platform solution for modern embedded systems. You will see a huge improvement in performance on 64 bit systems, but I've also included a script to build ARM 32 JDK 25 with FFM which currently doesn't exist. https://github.com/sgjava/javauio2#arm32-support--modern-ffm-back-to-the…

Java UIO Java UIO offers robust Java interfaces optimized for Linux Userspace IO, emphasizing high performance. Engineered from scratch, it leverages contemporary kernel APIs, libraries, and cutting-edge code generation methodologies, embodying a state-of-the-art cross-platform solution. Rather than reinventing established paradigms, Java UIO harnesses existing standards, avoiding redundant development commonly observed in other IO libraries. Seamlessly supporting JDK 25 LTS, this framework integrates Project Lombok to streamline code, enhancing readability and conciseness. 🌍 The 32-bit & FFM Reality With Java 25, there is no more s…

Well Well, Who's The Asshole Now? Yeah I Need a Job... I'm not too bad. Written for: the same readers as the finding, maintainers and users; the chart is built to be attached to it or to stand alone in a forum post. Ours versus theirs, same board, same 100-minute 4K 10-bit title, same afternoon, same kernel journal: frames out of 143,641decoder resetsspeed theirs, jellyfin-ffmpeg 8.1.3-1 with its bundled fork MPP100,13111,520~120 fps until it broke at 42:11 ours, system ffmpeg → rockchip-vaapi → upstream-lineage MPP143,6410106 fps, intact to the end The chart shows it in one glance: nothing missing anywhere for either unt…

Hi, My journald logs are limited to last midnight. I figured out it's related to logrotate.service. When I run it with couple of logs present in /var/log/journal (and passing all tests) they become 0-sized. Then: $ journalctl --verify Journal file /var/log/journal/xxx/system.journal is truncated, ignoring file. PASS: /run/log/journal/xxx/system.journal $ ls /var/log/journal/xxx -lsh total 0 0 -rw-r-----+ 1 root systemd-journal 0 Feb 26 12:10 system@141d4d3509d94af8aeecc18c6e8eec9a-0000000000000001-0005f58e34f3a6c8.journal 0 -rw-r-----+ 1 root systemd-journal 0 Feb 26 12:10 system.journal I've discovered that /var/log/journal is a…

Does this forum support Kali in Raspberry Pi? Raspberry Pi Forums do not.

Kde connect is a nice toy controlling mouse keyboard of Ubuntu desktop running gnome from android. Can do more things as well. It is a gnome extension that can be installed with the command sudo apt install gnome-shell-extension-gsconnect All other installations way failed for me. Only for the ones interested....

Hi all, I decided today to give an Armbian build a whirl as a virtual machine (guest). In particular, Armbian_24.2.4_Uefi-x86_jammy_current_6.6.21_kde-neon_desktop.img. As is usual with installing a virtual machine, it comes up with a default video resolution of 1024x768; I can usually quickly get it full screen on my system as 1920x1080 by going to the System Settings : Hardware : Display and Monitor : etc. However, here there is no hardware subsection at all, and a search didn't turn up a setting to change the display. Any advice on where to find it? I installed the spice guest driver and related packages on the guest. …

Hi, i have some difficulties to add some boot parameters to the kernel. From what i read, the most safe procedure is to use the armbian-config tool, that will add the parameters to /boot/armbianEnv.txt file. As i have understood, the armbianEnv will be readed by the boot.cmd/boot.scr at launch, without need to recompile anything. I have added the needed parameters using armbian-config, but does not work. To be precise, the commands that i have to add are: Spoiler video=composite-1:d video=Composite-1:d I need to disable the drm composite output because my monitor is.....well, not good and the composite output cause…

During the installation process of Armbian you set admin password, make a new user, set time zone and system langue, BUT not the keyboard layout... Any reason this is not part of the default armbian install process? Keyboard layout should be the first option to set during boot.

I've just installed Kodi Matrix in my new Rock5B but it's impossible to install any add-ons Any suggestion? Thank you in advance

Not sure why but after sudo update Kodi.bin disappeared was getting an error kodi.bin not found I was trying to reinstall it with sudo apt Iinstall Kodi, but I was still getting the same error. Until I discover that I had to run command Sudo apt install kodi-bin This worked.

I have been trying to set up labwc as a replacement for openbox (X11) in my project. I can install it very simply by building a minimal image Trixie (Bookworm does not include labwc), then * sudo apt install labwc seatd foot * at the screen with usb keyboard (not from SSH) start: labwc -d -s foot Then I am in labwc, with a terminal emulator on my HDMI screen When I right click on the desktop and choose "Exit", I get a kernel oops: Spoiler Armbian-unofficial 25.08.0-trunk Trixie ttyS0 orangepizero3 login: Internal error: Oops - BUG: 00000000f2000800 [#1] SMP Modules linked in: rfcomm bnep hci_uart btqca btrtl b…

I have upgraded multiple RockPiS that were happily working - new version is Armbian 22.08.8 stable - but the latest version of Armbian-config no longer includes WiFi Access point creation/ management, and seems to disable the Access Point functionality. I am hoping this is an error that will be fixed - but if not, is there any way to downgrade the version of Armbian-Config - or turn the Access Point back on ?

Hope there is a option.. for install libssl1.1 Drive me cray. I run: ___ _ _ _ _ _ ____ / _ \ __| |_ __ ___ (_) __| | | \ | |___ \ | | | |/ _` | '__/ _ \| |/ _` | | \| | __) | | |_| | (_| | | | (_) | | (_| | | |\ |/ __/ \___/ \__,_|_| \___/|_|\__,_| |_| \_|_____| Welcome to Armbian 23.05.1 Bookworm with Linux 6.1.30-meson64 System load: 2% Up time: 31 min Memory usage: 9% of 3.69G IP: 192.168.5.70 CPU temp: 34°C Usage of /: 9% of 57G RX today: 499.3 MiB Last login: Tue Jul 18 01:39:33 2023 from 192.168.5.101 Fow my D…

Haven't found any threads here for setting up libwidevine on armbian. Has anyone had any luck setting it up on armbian 64 bit? I've seen sone snaps and on the raspberry pi OS, they have a package for chromium 32 bit (since there is no libwidevine 64bit yet). Any suggestions?

Linux 6.15 was released yesterday. How long does it normally take before it's ready for the armbian build process?

How to get linux-headers for my current kernel? I use Odroid XU4. After install last version of Armbian (24.2.1 Jammy XFCE Desktop) I do sudo apt-get update && sudo apt-get upgrade -y After I try to install headers $ sudo apt-get install linux-headers-$(uname -r) Reading package lists... Done Building dependency tree... Done Reading state information... Done E: Unable to locate package linux-headers-6.1.77-current-odroidxu4 E: Couldn't find any package by glob 'linux-headers-6.1.77-current-odroidxu4' E: Couldn't find any package by regex 'linux-headers-6.1.77-current-odroidxu4' But there is no my version. Why? There is full list…

I need to compile a driver on the raspberry my kernel is 6.6.78-current-bcm2711 I need to download linux-headers-6.6.78 can someone help

Working on making klipper, a 3d printiing util like Marlin , work on a bpi5 running armbian, fully updated Since the last update a day back, make has been broken. I think its now expecting windows line endings, which it won't find on a linux system. The error message is consistent: gene@bpi51:~/src/klipper$ make /home/gene/src/klipper/.config:13: *** missing separator. Stop. Line 13 is the first non-comment line in the file. The file uses $0A only as linefeeds, no CR's exist in it. The klipper Makefile uses file ".config" as its src of instructions: A head -14 of that file: gene@bpi51:~/src/klipper$ head -14 .config # This file contain…

I've been using Armbian for developing an image for running on some custom hardware based on an Allwinner S3 (SoC with a single arm v7 core and 128mb ram) and it has been really helpful. My system now runs the software it was built for, and i love having complete Debian for development, maintenance and debugging. However I would like to have the option of making the system more like an embedded system most of the time : for most of its life it's running a custom application that gets video from a camera, h264 encodes it and sends it and some other data out over a data link. When it's in this mode it would be great if it was more like a buildroot type syst…

I have an OrangePi PC with armbian installed on it. Today, probably because of my stupidity, the board couldn't boot after upgrading a bunch of stuff. When I opened the sd card on my pc, I found that there were no kernel files in /boot and there were broken symlinks. I tried to replace these with the files from the current minimal image armbian is available for the board, but encountered a UUID mismatch. I then used files from a september 2021 backup, which did allow me to boot into a functional system. It had Linux 5.10.43-sunxi. But before my attempts to fix the issue, my system had Linux 6.1.11-sunxi installed, so I am concerned about this mismatch and would like to sa…

Hi, i'm Alexandre and I use Armbian on cubox as a multimedia NAS, but now I seem to understand that the cubox is getting too old and the support is almost discontinued... So I would like to migrate my nas with all data and web servers to a raspberry. It's possible? If yes, how can I make it? Thanks a lot!

I installed minidlna on a Linux Orange Pi PC 6.12.23-current-sunxi and also on an Orange Pi Zero, but it doesn't work; it doesn't appear in the client, on an LG Smart TV. On a Raspberry Pi, it does work; the configuration files are the same, and there are no network rules blocking any traffic... Any ideas what it could be?

armbian-bsp-cli-odroidc2_24.2.1_arm64__1-PC13d1-Vf2bb-H02fb-Ba537-R6632.deb is available in the package list but the actual .deb file is missing on the server, which causes apt upgrade to fail with HTTP 404. This happens to lots of mirrors.

I recently flashed armbian desktop for my raspberry pi 5 and I needed libcamera but it was missing. I tried most methods I could find but nothing worked. Any suggestions please.

I'm trying to install Jellyfin in a docker container to get hardware acceleration, I need to pass /dev/mali0 to the container. I'm running the 6.1.84-vendor-rk35xx kernel. Below are my clinfo results What am I forgetting here?

https://paste.armbian.com/puwoqoxesi Hi there Running Armbian 22.11.4 on OrangePi docker ps -a actually shows all of my containers fine, but docker ps shows that only a few are actually running When I connect my monitor to the device this is what I’m seeing: Any ideas on what could be the issue here? orange login: [ 25.402264] unisoc_wifi unisoc_wifi wiano: sprdwl_report_connection Non failed status code:1! [ 25.547756] HCN ERR: dumpmem_rx_callback open error no.-21 retry:1 [ 25.986960] surxi-mmc 4021000.mmc: data error, sending stop command 25.998135] sdiohal err:dt read fail ret:-110, system_addr=0x4024f000 [ 26.010990]…

Hello, I am having a lot of fun making my first apps with python and tkinter... and with my recent good experiences with LCD TFT displays, I want to create an "appliance" project. I can start non-GUI apps with systemctl service files, and they run with the proper user permissions... and I don't worry about giving it root access. But I would like to do the same with GUI apps. They would be full screen, 320x240 on the LCD TFT. All I can do now is: * start with armbian minimal (with orange pi zero in my case) * add the DTS for LCD and touch, and the ko for spi-gpio (as seen in my threads in the orangepi zero section) …

Getting an external IP address over network request as part of MOTD info is completle ruined ssh session start when board cant connect to desired server to get this address. It's get_wan_address function inside https://github.com/armbian/build/blob/main/packages/bsp/common/etc/update-motd.d/30-armbian-sysinfo . You can easy check this just by disable access to internet on you router and try to open new ssh session. After i mask this function call all worked well. Unfortunately i cant figure out how to send issue on GitHub due to redirect to some Google form, so there am i.

I'm trying to run Armbian on my Rock 5B by booting off an SD card and having root on NVMe. Here's what I've done: First, on another Linux system: Create a gpt partition table on the NVMe. Allocate 256 MB for a /boot (one of these days, booting from NVMe will settle down, but for now...) Allocate the remainder of the NVMe to /. Use dd to copy the filesystem from the SD card to the NVME's root partition. Use gparted to change the UUID of the NVME root and expand the filesystem to use the available space. Alter the armbianEnv.txt file to point to the NVME's UUID. Install the SD and NVMe cards on the Rock. When I boot the Rock, i…

I can't install mpd on Armbian v26.2 rolling for NanoPi Air running Armbian Linux 6.12.76-current-sunxi Packages: Ubuntu stable (noble) user@nanopiair:~$ sudo apt install mpd Reading package lists... Done Building dependency tree... Done Reading state information... Done Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: mpd : Depends: libavcodec61 (&gt…

I have a k8s environment, where I am running 3 masters and 7 worker nodes. Daily my pods are in evicted states due to disk pressure. I am getting the below error on my worker node. Message: The node was low on resource: ephemeral-storage. Status: Failed Reason: Evicted Message: Pod The node had condition: [DiskPressure]. But my worker node has enough resources to schedule pods. Please help me resolve this issue

every time I configure the IO pins on my Banana PI M1, according to the example below who php: <?php exec('echo "4" > /sys/class/gpio/export'); exec('echo "in" > /sys/class/gpio/gpio4/direction'); exec('echo "7" > /sys/class/gpio/export'); exec('echo "in" > /sys/class/gpio/gpio7/direction'); I already did it in script, python and in C.... and always the same error, my network card stops working, the rest of the hardware works normally, I put a monitor on the hdmi output and the rest of the hardware is normal, only the network card stops working, what to do? how can I solve? does anyone have any tips? Cri…

I had everything running smoothly until this evening and after the update, my mysql server suddenly stopped working... now I want to look in the error log, but there is nothing there. okay, i found two problems: 1 problem: it seems i installed two mysql server installed mysql-server-8.0 mysql-server how can i uninstall only the mysql-server, but not the mysql-server-8.0 2. problem: i found out, that my var/log/ directory is full "armbian-ramlog size is full" it is set to 50mb. the biggest files are the files in log/sysstat/sar1-31 Can i set it up to 100mb? the sysstat/sar files are the largest ones …

I recently acquired some nanopc t4, I wanted to install casaos, openmedivault, friendlywrt, pihole, and things like that, it turns out that no matter what operating system I install, armbian, ubuntu, lubuntu, debian, or the official ones, I never have access to the installed services, that is I can not access casaos from another pc, as if there was a firewall that blocks incoming connections, I only have access via ssh, if I pin to the ip address (192. 168.0.31 for example) all good, there is no firewall installed, with all the systems the same thing happens to me, in all the nanopc, I only have access from the same nanopc, that is to say, 127.0.0.1, but it is impossible …

Hello I am using: Linux nanopineo 6.12.74-current-sunxi #10 SMP Thu Feb 19 15:29:56 UTC 2026 armv7l GNU/Linux PRETTY_NAME="Armbian_community 26.2.0-trunk.464 trixie" NAME="Debian GNU/Linux" VERSION_ID="13" VERSION="13 (trixie)" VERSION_CODENAME=trixie DEBIAN_VERSION_FULL=13.3 ARMBIAN_PRETTY_NAME="Armbian_community 26.2.0-trunk.464 trixie" i am tring to bind spi1 to fbdev. Here are the configurations: /boot/armbianEnv.txt: /boot/overlay-user/spi1-st7789.dts: SPI1 is not generating any CLK or MOSI signals on the physical pins. Looking forward for any help Best regards, Genadi

Is it normal ? Because i have a some problems with custom local domain configurations... root@nanopi-r4s:~# sudo systemctl status systemd-networkd-wait-online.service × systemd-networkd-wait-online.service - Wait for Network to be Configured Loaded: loaded (/lib/systemd/system/systemd-networkd-wait-online.service; enabled; preset: enabled) Active: failed (Result: exit-code) since Sat 2025-03-01 23:45:33 MSK; 2min 25s ago Docs: man:systemd-networkd-wait-online.service(8) Process: 1176 ExecStart=/lib/systemd/systemd-networkd-wait-online (code=exited, status=1/FAILURE) Main PID: 1176 (code=exited, stat…

Hi, Anyone willing to share how they have done the this ? Got OMV5 running fine with Stat Hat but looking to upgrade from scratch to OMV6. I plan on installing latest Bullseye cli, then use Armbian-Config utility to install OMV6 ...

I have booted it, generated root and user pw's, generated en-utf8 env, Powered off, copied my /etc/hosts file to it which has hostname and ipv4 address for this., edited /etc/hostname with nano to change it and chattr +i that hostname file so I don't have to redo it every boot. replaced card in bpi-m5. booted up to the new hostname, my pw worked but an ip a is still w/o an ipv4 address which it should get from the hosts file but didn't. . sudo network-manager is not found. Whats next, or what should /etc/network/interfaces look like?

Hello, please help me. I have been doing research these past five days on how I can create a dts file for the Levetop LT7686. This LCD has no D/C or RS pin, which means this LCD is 9-bit SPI TFT LCD. Any clue? I tried with this dts file: /dts-v1/; /plugin/; / { compatible = "rockchip,rk3588"; fragment@0 { target = <&spi4>; __overlay__ { status = "okay"; #address-cells = <1>; #size-cells = <0>; cs-gpios = <&gpio1 52 0>; …

Neofetch says "-bash: fastfetch: command not found" yet fastfetch doesn't exist in the repository. Anyone know how to fix?

As configured on install (at least in 24.8.4 I installed), the netplan config files try to manage all networking interfaces - which breaks the virtual bridge interfaces that containers and VM managers like Podman, Docket, etc create and use. See https://github.com/moby/moby/issues/40217#issuecomment-2041628162 for more information If networkctl shows podman* or veth* as managed then this is probably the problem breaking your container networking. To work around this issue, I modified the file /etc/netplan/10-dhcp-all-interfaces.yaml to only manage en* interfaces rather than all interfaces, followed by netplan apply. # Added by…

I've installed docker on armbian https://dl.armbian.com/orangepi5-plus/Bookworm_vendor_minimal but I'm getting that error ``` août 24 12:43:08 user dockerd[1429]: time="2024-08-24T12:43:08.089479936+02:00" level=error msg="[resolver] failed to query external DNS server" client-addr="udp:172.18.0.12:40033" dns-server="udp:172.20.10.1:53" error="read udp 172.18.0.12:40033->172.20.10.1:53: i/o timeout" question=";test.in.domain.lan.\tIN\t AAAA" ```

This system has been running for several months months as a backup server with a nobel release about a year old, maybe some older, using two usb3 7 port hubs because 1 hub could not handle the current draw of 5 TSMC 4T SSD's using startech usb3.1 cables to connect 5 if them in a /raid6 configuration for an 11.1 Tb drive. But I decided to do an as sudo -i, "apt update" and was advised that would update about 430 files so I figured I'd do an apt update -y, then and apt --purge autoremove". Unforch it went into lala land while making a new initrd. After about 20 minutes I did a powerdown to be greeted by a repeating loop indicating there was no network. So I dl'd & w…

Hi! I am using the as of this date latest armbian image Armbian 22.11 Jammy, Kernel 5.15.y, Size: 495Mb, CLI, Release date: Nov 30, 2022 for my board: https://www.armbian.com/rock64/ I am not sure if this is specifically an issue with the CLI image, or if both images are affected. I am not using a GUI. I configured a static IP address via netplan (generated and applied the config) and installed a dhcp server. The dhcp server sometimes kept failing to start on reboot. Checking the logs showed that even though the isc-dhcp-server depends on the network being configured before it tries to start, that actually systemd sometimes starts isc-dhcp-server b…

Hello all. I have 3 pi5s running Armbian and 1 pc running windows10. Prior to changing from Bookworm to Armbian all boxes would communicate well with each other. Now only windows explorer communicates with the Pis. The Pis do not see each other nor Windows. I tried (almost) everything and nothing works. I could not get/install WSDD >>Package wsdd is not available, but is referred to by another package. This may mean that the package is missing, has been obsoleted, or is only available from another source Error: Package 'wsdd' has no installation candidate>> so I installed WSDD2 and made reference to it and still no go. Any sol…

Hello. I am a new user of the armbian. I installed nextcloud from armbian-config. Need docker to have access to the file system. I want to place the nextcloud files in the home directory, which is mounted on another partition. I don't understand how to give docker access to my file system. I didn't find the necessary setting in armbian-config. I'm stuck on initial setup

Hi Unfortunately, I use an Odroid N2 (and N2+) for nextcloud installed via the nextcloudpi script. Now, the support is gone and there are no longer updates for nextcloud beyond version 30.0.x available. Currently I am running nextcloud 30.0.17. The version 30.0.x will reach end-of-support soon. I can imagine the following alternatives: Use armbian-config to install nextcloud - but will it do the update correctly or at all esp. for my external disks which nextcloud is using ? Use the image for the Odroid C2 (another arm-based SBC) and replace the kernel by the one for the Odroid N2+ Port the script from the Odroid C2 image to my O…

Hello Im running home asistant supervised on Debian GNU/Linux 12 (bookworm). Docker 28. On a T95Q S905x2 tv box. I have error message : overlayfs: NFS export requires "redirect-_dir=nofollow". on non upper mount falling back to "NFS export=off" Well dont know any programming. only CTRL C + CTRL V. Its some directory debian cannot access on th Tv box. Can yo help me please? Kind Regards Zsolt

I did install an apt install nfs-kernel-server nfs-common on my bananaPi M1. I did export some dirs and successfully mounted them from my clients. After a reboot the mounts did not work. Then I manually invoked exportfs -a and the client were able to mount. What is the correct way to get the nfs server started after a reboot?

Hello, I’m facing yet another strange problem, and I am posting it here as well, because I think it could be OS related. Some details about my server: Armbian 26.2.1 trixie Nginx Nextcloud (latest) MariaDB Letsencrypt (updated 3 weeks ago) Until a few days ago, every browser on any of my devices could call the web gui of my server and Nextcloud presented its login page. Then, after the latest OS update, suddenly browsers tell my they can’t connect to the server, but every synching app on any of devices still work perfectly! And I can even access my files on the server by using FolderSync’s¹…

Hello, I am facing situation where new armbian images e.g. Armbian_community_26.2.0-trunk.100_Orangepizero2w_trixie_current_6.12.63_minimal is coming without nmui. nmtui support one wifi configuration with dhcp while assigning static ip to other wifi. systemd-networkd does not support separate behaviour for two different wifi configruation. Requesting to provide nmtui which is more flexible. To elaborate the case, the dhcp is must for connecting to mobile hotspot which keeps on changing ip series. And for IoT project, I need static configuration. That's why i need armbian to allow dhcp when i am trying to ssh on…

Just using Armbian for the first time on a Le Potato. Added a USB WiFi dongle, configured it using /etc/network/interfaces.d/<wifi device id>, and /etc/wpa_supplicant/wpa_supplicant.conf. My problems is the DNS server doesn't seem to be set correctly: $ nslookup github.com ;; communications error to 127.0.0.1#53: connection refused But: $ nslookup -q=all github.com 8.8.8.8 unknown query type: all Server: 8.8.8.8 Address: 8.8.8.8#53 Non-authoritative answer: Name: github.com Address: 140.82.112.4 How do I fix this to use the DNS provided by my router using DHCP? My /etc/network/interfaces.d/<wifi device id> f…

it's in regular ubuntu 22.04 for arm but not there, why?

Hi Members, I'm setting and reading the GPIO PINs for different BPI's frequently only by bash by maintaining the /sys/class/gpio/xxx values. The only problem is that all these files belong to root :root and I have to use the sudo command in my scripts. I've read about putting a non root user to the gpio group will fix that. But on Armbian there is no "gpio" group ;( That seems the reason why the directory /sys/class/gpio is not prepared as root:gpio Please has someone an idea when this will be implemented? Regards wollik

Hello, I'm using Armbian on a Orangepi PC with retrorangepi (retrostone2). When i'm in retrorangepi, the sound is great but as soon as i launch a rom, it's total silence. I don't have sound on armbian desktop neither... Does anybody have a clue? Thanks for your help. Retroorangepi is a third party distribution. Moved to Software, Applications, Userspace.

Hi, I've just installed chromium on latest noble and some ffpg packages for. Unfortunately there are issues with Live Video Streaming, stucks and all green in between, None Live Videos seems to work better. It worked with the preinstalled firefox, unfortunately live video always stops after some minutes, while other stuff on websites around the videos continues. It's an rk3399 Board.

hi all, i installed a new build Armbian_community_24.8.0-trunk.596_Orangepizero_noble_current_6.6.44.img.xz into a new SD card i upgraded the OS and all was fine. but during the Octoprint install this phase freezed: Building wheels for collected packages: zeroconf, regex, MarkupSafe, argon2-cffi-bindings, sgmllib3k Building wheel for zeroconf (pyproject.toml) ... \ also the other two ssh terminal was freezed but the IP address (wired and wlan) was reachable, no toher SSH sessions was possible. i powered off the board and restarted i tried to reinstall octoprint ( OctoPrint/bin…

Problem first showed up 3 days ago during a regular apt-get update, and is currently showing as this error: Err:5 http://netcup.armbian.com/apt bookworm InRelease The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 93D6889F9F0E78D5 This seems to be (matching final part of the fingerprint of) armbian's GPG public key present in /usr/share/keyrings/armbian.gpg I've followed the suggestion to refresh the key, as posted in response to my inquiry on reddit: https://www.reddit.com/r/Armbian/comments/1im4uka/broken_mir…

Hello, I have an odroid hc4 which I am mainly using as a home NAS. I chose Armbian + OMV (headless) and it works really well. Now I tried using it as a media center at the same time with kodi. I tried both the "old" kodi version from the debian repos and also the flatpak version. For both it seems like the hardware acceleration isn't working. I can run youtube 1080p with vp9 quite fine, but neither 1080p with h264, nor anything 4k, at this resolutions it's stuttering a lot. Also the CPU-usage is always very high. When i start flatpak-kodi it returns: 'this->recurse > 0' failed at ../src/pipewire/thread-loop.c:62 do_unlock() libva info: VA-…

Hi, i have a Problem, where the Network is not coming up. What i have done: Installed Arbmian Bullseye CLI on SD Card Booted it on Odroid M1, update and updgrade system - Reboot Until then, the NetworkManager is active and works Installed OMV through armbian-config OMV kills all NetworkManager stuff, and enables systemd-networkd and it does that as i can see correct, with netplan etc... After reboot, the boot hangs 2 Minutes in "A start job is running for Wait for Network to be Configured" and finally boots - without IP Boot finished - login and try to find the error: netw…