Skip to content
View in the app

A better way to browse. Learn more.
Armbian Community Forums

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Allwinner sunxi

Quick links to search tags:

Banana Pi M4 Zero, BIGTREETECH CB1, Libre Tritium H3, Libre Tritium H5, Olimex Teres A64, Orange Pi One, Orange Pi Zero Plus, Orange Pi Zero 2, Pine64

  1. Legacy images fixed

    Orange Pi Zero 2 · Started by Werner,

    Old ugly EOL-kernel legacy image received fixes for booting. Feel free to test. https://imola.armbian.com/dl/orangepizero2/archive/

    Werner

  2. Orange Pi Zero 2 H616 Images

    Orange Pi Zero 2 · Started by jbolger,

    Hi team, There are no current images for Orange Pi Zero 2 at https://www.armbian.com/cf7stdb-entries/orange-pi-zero-2/ The Zero image does not work. I did manage to find an archived legacy image based on some posts from 2022 however nothing on the new kernel works. My question is this: Is there a reason why these devices require unique builds? I understand the kernel drivers may not be in 6.x for this board however I'm more referring to the huge number of builds that need to be supported. Thanks, Jason

    stallion25

  3. Headers compilation error

    Orange Pi One · Started by IgorS,

    With new python based build system there is error compiling headers while installing headers deb. Im not sure is it because of new build system or the problem is in 6.1.15 kernel branch. My compile command was: ./compile.sh BOARD=orangepione BRANCH=current BUILD_MINIMAL=no BUILD_DESKTOP=no KERNEL_ONLY=yes KERNEL_CONFIGURE=no COMPRESS_OUTPUTIMAGE=sha,img SKIP_EXTERNAL_TOOLCHAINS=no BUILD_KSRC=no PRIVATE_CCACHE=yes RELEASE=bionic ARTIFACT_IGNORE_CACHE=yes BUILD_KSRC=yes KERNEL_GIT=full While installing i got: igor@honeypot:~/trash/debs$ ls -1 armbian-config_23.05.0-trunk_all.deb armbian-firmware_1-SA56ad-Bf566_all.deb linux-dtb-c…

    IgorS

  4. (SOLVED)Not runnig cron, fstab or any other script at boot

    Orange Pi Zero 2 · Started by JoseMartin,

    So, I've installed Armbian_23.02.2_Orangepizero2_bullseye_legacy_4.9.318.img on 2 diferent SD cards with same results, I'm not able to figure why they don't run fstab, cron jobs or any other script automatically. I'm mounting a samba share, by command it mounts correctly, this is my fstab entry: //192.168.1.2/Descargas /mnt/Descargas/ cifs uid=1000,gid=1000,guest 0 0 tried _netdev to wait for network and then mount with the same results //192.168.1.2/Descargas /mnt/Descargas/ cifs uid=1000,gid=1000,guest, _netdev 0 0 If I run mount -a it works, tried to add it into root crontab with * * * * /bin/mount -a Still, no resu…

    b2522

  5. Orange Pi Zero 2 v1.5 not booting on kernel 6.1.4

    Orange Pi Zero 2 · Started by elliotmatson,

    Thanks for everyone's work on this project! I'm working on a few Orange Pi Zero 2 v1.5's, and they won't finish booting on a few of the most recent images. (Just testing jammy right now to keep things consistent) Boot Successfully: Armbian_22.11.3_Orangepizero2_jammy_edge_6.1.4 Armbian_22.05.3_Orangepizero2_jammy_edge_5.17.11 Do Not Boot Successfully: Armbian_23.02.2_Orangepizero2_jammy_edge_6.1.11 Armbian_22.11.1_Orangepizero2_jammy_edge_6.0.10 Armbian_22.08.7_Orangepizero2_jammy_edge_5.19.16 Typically, when the boot fails, all I get is this over serial with no LED's: U-Boot SPL 2022.07-armb…

    ALIGMSTEN

  6. activate 1-Wire

    Orange Pi Zero 2 · Started by bjorns,

    Hi, I've been trying to get my DS1820 temp sensor working but cant seem to get the device to show up om my orange pi zero 2 running Orange Pi 3.0.6 Bullseye Most info i find starts our with run armbian-config but orangpi doesnt have it. All i got is the orangepi-config but it doesnt have the "Go to the “system” section and select “Hardware” then activate w1-gpio." so i was looking arround and found you need to enable overlays in /boot/armbianEnv.txt but dont have it aswell but the alternative /boot/orangepiEnv.txt there i add the /boot/orangepiEnv.txt overlay_prefix=sun50i-h616 overlays=w1-gpio param_w1_pin=PC8 …

    bjorns

  7. WiFi not working on OrangePi Zero 2

    Orange Pi Zero 2 · Started by gyrex,

    WiFi isn't working on the current legacy image: Armbian_22.11.3_Orangepizero2_jammy_legacy_4.9.318.img [FAILED] Failed to start Access poi…server for Wi-Fi and Ethernet. See 'systemctl status hostapd.service' for details. [ OK ] Finished OpenVPN service. openvpn.service [ OK ] Started /etc/rc.local Compatibility. rc-local.service rpc-statd-notify.service [ OK ] Started Notify NFS peers of a restart. [ OK ] Finished Permit User Sessions. systemd-user-sessions.service [ OK ] Started Bluetooth service. bluetooth.service [ OK ] Reached target Bluetooth Support. Starting Hold until boot process finishes up... Starting Terminate Plymouth …

    • 0

      Reputation Points

    • 1 reply
    • 4.2k views
    gyrex

  8. orange pi Zero 2 Power on But not Booting

    Orange Pi Zero 2 · Started by Trimx,

    Unfortunately, the Orange pi zero 2 does not start with the Armbian img, it does turn on, but there is only a white line in the top left and it does not boot any further. I once downloaded the original ubuntu image from the manufacturer, this works without problems but is just outdated. Can you take a look at it? Actually wanted to install the pi hole project with Armbian Image: Armbian 22.11 Jammy Kernel 4.9.y, Size: 445Mb, Release date: Jan 10, 2023 SHA hash | PGP signature

    • 0

      Reputation Points

    • 3 replies
    • 7.7k views
    materockt
  9. Guest

    My Zero2 DTS

    Orange Pi Zero 2 · Started by Guest,

    This is my DTS file for OrangePi Zero2, opened UART5 for attach a GPS module on GPIO. Tried to add 1wire, PPS and SPI , but can't work. maybe help someone. sun50i-h616-orangepi-zero2.dts

    • 0

      Reputation Points

    • 4 replies
    • 5k views
    Guest
    Guest

  10. Orange Pi Zero 2 doesn't boot after kernel verison 4.9.318

    Orange Pi Zero 2 · Started by FatihEke,

    Hello, I have orange pi zero 2 but it doesn't work with armbian versions after kernel version 4.9.318, I tried many versions. When I check it through the serial port, it stays on "trying to boot from MMC1 armbian" and the led on it is constantly red. Also, if I upgrade the kernel with apt-get upgrade in version 4.9.318, the card does not boot afterward and gets a "No ethernet found" error. Versions I tried : Armbian_22.11.3_Orangepizero2_jammy_legacy_4.9.318.img [Worked but no wifi connection] Armbian_22.02.2_Orangepizero2_bullseye_legacy_4.9.255.img [Works good] Armbian_22.08.7_Orangepizero2_jammy_edge_5.19.16.img [Not working !!] Armbian_…

    Darius82

  11. Orange Pi Zero 2 *usually* doesn't boot up

    Orange Pi Zero 2 · Started by Leon Wilk,

    I have an Orange Pi Zero 2 set up with Octoprint and a webcam. No keyboard or screen, all access over ssh... if it's running. If it started OK, then no problem, everything works fine. If. Usually powering it up lights up the red LED and... it ends here. I waited even half an hour, red, no boot. Occasionally - one in five-ten attempts to boot - the LED turns green after a couple seconds and the board boots fine. Very rarely the red turns to green after a minute or so, and the board boots up. Unfortunately, having no cable to connect it to a monitor or serial, my diagnostics are quite limited - after booting dmesg looks mostly clean, but maybe in case it's a sem…

    • 0

      Reputation Points

    • 2 replies
    • 4.6k views
    Werner

  12. Orange Pi Zero 2 stop booting after upgrade

    Orange Pi Zero 2 · Started by PiRat,

    Orange Pi Zero 2 running on current image (from release date: Jan 10, 2023) fail to boot after upgrade. The boot log: U-Boot 2018.05-armbian (Jan 10 2023 - 07:48:03 +0000) Xunlong Software [00.535]CPU: Allwinner H616 [00.538]Model: Orange Pi Zero 2 I2C: ready [00.542]DRAM: 1 GiB Relocation Offset is: 35ec7000 [00.583]secure enable bit: 0 [00.586]PMU: AXP806 [00.591]CPU=1008 MHz,PLL6=600 Mhz,AHB=200 Mhz, APB1=100Mhz MBus=400Mhz [00.773]sunxi overlay merged okqv [00.776]drv_disp_init [00.805]__clk_enable: clk is null. tv_init()950 fetch tv0 err. [00.811]drv_disp_init finish [00.813]gic: sec monitor mode [00.819]flash i…

    Igor

  13. H616 mainlining effort

    Orange Pi Zero 2 · Started by mcerveny,

    Hello. I see some progress in H616 (OPIZ2) support in mainline linux (now 6.2RC5 comes with USB) - https://linux-sunxi.org/Linux_mainlining_effort . I tried to setup/enable some other components and I am successful with upstream linux kernel 6.2RC5: - displayengine (drm, fb, mixer, tcon, hdmi) (seems to have some I2C/EDID problems) - videoengine (cedrus) (in testing now) - gpu (3d mali, panfrost) - dma, efuse, thermal ... but I am unsuccessful with - crypto (total different behavior in contrast to H616 manual) and untested - audio codecs and hdmi audio - opp power management (frequency + voltage) for CPU and GPU - SDIO wifi I was also succ…

    ag123

  14. Orange pi zero2 - 1-wire

    Orange Pi Zero 2 · Started by carlos8agomez,

    I have an orange pi zero 2 and I need to configure the 1-wire protocol. I need to know which gpio pin to connect to. Thanks

    lampra

  15. Custom u-boot configuration howto?

    Orange Pi Zero 2 · Started by Xenomorph Neurotoxin,

    When assembling custom image through armbian build env, how to insert my own config. How to enable support for booting from USB flash? To flash the bootloader in spi-flash I'm flash u-boot-sunxi-with-spl.bin into spi-flash, but have error No Bootable media found. Sorry for my English

    • 1

      Reputation Points

    • 4 replies
    • 16.9k views
    going

  16. Private MAC issue

    Orange Pi Zero 2 · Started by fatspirit,

    Hi there! How to disable private ethernet MAC on OPZ2? Router says my device has one.

    Hans.K.K.

  17. Official images for Orangepi Zero 2

    Orange Pi Zero 2 · Started by Igor,

    Armbian 22.11 Bullseye / Jammy Kernel 4.9.318 or 6.1.4 Release date: Jan 10, 2023 Legacy kernel has more or less full hardware support, while mainline lack functions such is wireless, HDMI, ... https://www.armbian.com/orange-pi-zero-2/ Looking for maintainer!

    Igor

  18. Orange Pi 2 Weirdness

    Orange Pi Zero 2 · Started by Kiendeleo,

    So there is some weirdness happening with Armbian on the Orange Pi Zero 2 that I bought from Amazon. These are the V1.5 version of the hardware. With the Orange Pi image (which looks strangely like armbian), once the device is booted, the red led goes off, and the green led turns on. With the armbian image, the red light stays on, and the HDMI output does not turn on in the CLI image. This led me initially to think this board was not working. Once I hooked up a USB to Serial interface, I noticed it booted. Well, at least when the SD card was seated correctly, but that is a hardware problem. Once booted, `armbian-config` does not show the wif…

    ALIGMSTEN

  19. Run an ili9486 with pine64

    Pine A64 · Started by Paul Smith,

    By following the instruction how to enable ili9486 on orange pi, I have tried to do that with pine64. So, I installed armbian focal 22.10 with 5.15 kernel, enabled spidev and overlayed dts with tft installation and initialization. But still have a white display. Also I was trying another way to use/edit fbtft, the same issue. `dmesg` shows that spi driver no compatible with ili9486

    robertoj

  20. Orange Pi Zero 2, no boot on fresh image

    Orange Pi Zero 2 · Started by Nur Purwanto,

    My OPIZ2 was working happily with Armbian_bullseye 22.11, but due to the wifi issue, I download the Armbian_bullseye_22.02 dan flash the image into the same working SD card (overwritten). But now my OPIZ2 would not boot anymore, nothing seen in the serial communication either. No red/green LED ever lit. Sadly, this is my 2nd dead OPIZ2..... Seeking for help if those boards are still recoverable...

    Werner

  21. Hostname/domain change

    Orange Pi Zero 2 · Started by gen_t00,

    Hi all, I'm trying to change access my zero 2 via hostname instead of IP (e.g. https://mypizero2.local/). I've changed the hostname through sudo armbian-config but just cannot connect to it via hostname. Has anyone managed to get this working?

    • 0

      Reputation Points

    • 0 replies
    • 3.4k views
    gen_t00

  22. Pine A64(+) should be different from Pine A64-LTS?

    Pine A64 · Started by Tim Makarios,

    I recently bought a couple of A64-LTS boards from the Pine Store, but I couldn't get the official Armbian images to boot on them. https://www.armbian.com/pine64/ I could, however, get Manjaro to boot on them, and when I created an SD card with U-Boot from the Manjaro SD card, and the partition from the Armbian (Bullseye CLI) image, it booted into Armbian. I noticed, though, that Manjaro distinguishes between the Pine A64(+) and the Pine A64-LTS. Tow-boot also makes the same distinction. So I wondered if maybe Armbian wasn't booting on my A64-LTS boards because it wasn't making that distinction, but it should be. (I also noticed that …

    stormwyrm

  23. Recent Bullseye versions give me Read-only file system messages on boot

    Orange Pi Zero 2 · Started by c0nfluks,

    I've been having issues lately with the later versions 22.11 and above. At some point when I reboot, I'll get those 3 "Read-only file system" messages on boot: mkdir: cannot create directory ‘/root/.cache/oh-my-zsh’: Read-only file system rm: cannot remove '/root/.zcompdump-orangepizero2-5.8': Read-only file system zsh: locking failed for /root/.zsh_history: read-only file system: reading anyway What is happening?!

    cekubalim

  24. awus036acm wireless adapter not working

    Orange Pi One · Started by bunay,

    i have a alfa awus036acm wireless adapter install on my orange pi one with armbian jammy installed. my awus036acm adapter is not recognised , when i type iwconfig it's say no wireless extension is there possible way to make it work?

    • 0

      Reputation Points

    • 1 reply
    • 2.9k views
    Igor

  25. OPZ2 Working Armbian OS for Klipper

    Orange Pi Zero 2 · Started by Jrweber02,

    Looking for a working Armbian OS for Orange Pi Zero 2 seeing alot about newer images not working if anyone has confirmed working image for Running Klipper that would be appreciated Ive tried to flash both the cli images from the orange pi zero 2 section of armbian site but neither result in lights.

    Tina

  26. Best version for zero 2

    Orange Pi Zero 2 · Started by hardcod3dd,

    What version of armbian is the best overall for the opiz2 ? im mainly going to use it as a server so no desktop.its gonna run some python code for my bots. i might move it around so wifi with 5ghz support is a must .

    • 0

      Reputation Points

    • 0 replies
    • 2.8k views
    hardcod3dd

  27. Orangepi Zero 2 can not reboot and can not display on screen with Micro-HDMI port

    Orange Pi Zero 2 · Started by TheOWL,

    Armbian image version: Armbian 22.08 Bullseye Kernel 5.19.y, Size: 388Mb, Release date: Oct 22, 2022 Bug report: 1: When i reboot my orangepi zero 2 , my devices will be power off. 2: I use the newest image , display nothing on screen. But i have an older version image. It display to screen by Micro-HDMI perfect. 3: Is possible to light up green LED after system start? I mean, when the device power on, red LED light up. It's nice. But if light the green LED up after system start up, I can know my system get no troubles and it's running now.

    tpou

  28. working overlay for OrangePi Zero 2 to see armbian-config

    Orange Pi Zero 2 · Started by franz134,

    I have an OrangePi Zero 2 with the latest bullseye (5.19). I would like to activate SPI (and i2c) and was in armbian-config to do so. Besides that the system was frozen, i couldn't see anything under the hardware tab even after defreeze (only empty entries and a short pop-up: "usage: grep....." like in https://github.com/armbian/config/issues/33). While researching the problem, I found out that this could be due to the missing "overlay_prefix" in armbianEnv.txt. So i looked and found sun50i-h616-orangepi-zero2.dts in a subfolder and wanted to enter overlay_prefix=sun50i-h616. Now i get the following error message in the hardware tab: "loading error: expected at…

    cabanak

  29. Weird Boot Message

    Orange Pi Zero 2 · Started by moosemen,

    Hello I been having a problem with my zero2 it use to boot no problem but the other day it had problems booting I thought the sd card was carupt so I bought a new one from the store loaded the image for orangepi.org and booted it up now this message appears. [214]HELLO! BOOT0 is starting May 13 2020 14:10:04! [219]BOOT0 commit : 593cf83 [222]set pll start [224]periph0 has been enabled [227]set pll end [229]unknow PMU [231]PMU: AXP806 [238]vaild para:8 select dram para0 [242]board init ok [243]DRAM BOOT DRIVE INFO: V0.52 [247]the chip id is 0x5000 [249]chip id check OK [252]DRAM_VCC set to 1500 mv [256]write_leveling error [258]read_calibr…

    moosemen

  30. No Login Prompt on HDMI out

    Orange Pi Zero 2 · Started by ChecMate,

    HI, recently downloaded Armbian Jammy CLI for Orange Pi Zero 2 It boots up but doesn't display anything on HDMI. I have to access it via remote ssh on another computer. Any way to enable the HDMI. I was hoping to run a desktop on it. Reading different forums it's suggested that the default check is too short so HDMI is disabled but I've no idea how to disable this. Will there be a desktop version of Jammy for Orange pi Zero 2 available to download? I'm using Jammy with a desktop on a Orange Pi One and it works fine. Thanks

    • 0

      Reputation Points

    • 3 replies
    • 3.3k views
    ALIGMSTEN

  31. Orange pi zero 2 - can't start after reboot

    Orange Pi Zero 2 · Started by cabanak,

    Hi, Is possible to solve problem ? After reboot command orange pi zero 2 not want start and it stay turner off . I read article about changing R_WDOG instead of WDOG in ATF fix for different boad: Thanks

    • 0

      Reputation Points

    • 1 reply
    • 3.5k views
    cabanak

  32. install and use Armbian on PINE64+ without display

    Pine A64 · Started by Az-eddine Haida,

    Hi, i'm new with linux and SBC. My final goal is to use the board as a voice command recognition system (without display) and to be honest i do not know how to start. I downloaded Armbian desktop on microSD using balenaEtcher and I inserted it in the board e powered it! i do not have a display unfortunatly and i do not know if desktop version is the best choice or i have to install an embedded version if exists. Could help please? thanks

    Werner

  33. armbianmonitor not available on orange pi zero 2

    Orange Pi Zero 2 · Started by BlueFlame,

    I tried to install armbianmonitor on the opi zero 2, but unfortunately this fails: orangepizero2:~$ sudo armbianmonitor -r Installing RPi-Monitor. This can take up to 5 minutes. Be patient pleaseE: Unable to locate package rpimonitor /usr/bin/armbianmonitor: line 697: /usr/share/rpimonitor/scripts/updatePackagesStatus.pl: No such file or directory /usr/bin/armbianmonitor: line 193: /etc/rpimonitor/template/raspbian.conf: No such file or directory /usr/bin/armbianmonitor: line 196: cd: /etc/rpimonitor/: No such file or directory sed: can't read /etc/rpimonitor/template/temperature.conf: No such file or directory sed: can't read /etc/rpimonitor/template/cpu.conf: No such…

    • 0

      Reputation Points

    • 1 reply
    • 4k views
    nopnop2002

  34. Modifying the Linux driver for the Pine 7 inch DSI display

    Pine A64 · Started by rhs-jel,

    I need to use a 10 inch 800x600 DSI display in a Pine64 project and I think the easiest way to do this would be to modify the driver for the Pine 7 inch DSI display. It appears to me that the display resolution is hard coded in this driver (panel-feiyang-07024di26a30d.ko) and not supplied by a device tree overlay like some other Armbian SBCs. In the C source for this driver, I see the following data structure which defines a 1024x600 screen size for the 7 inch display ... static const struct drm_display_mode feiyang_default_mode = { .clock = 55000, .hdisplay = 1024, .hsync_start = 1024 + 310, .hsync_end = 1024 + 310 +…

    • 0

      Reputation Points

    • 1 reply
    • 2.8k views
    DasFisch

  35. gpio_keys: failed to get gpio: -22

    Orange Pi Zero 2 · Started by zaibot.w,

    Hi everyone, I'm struggling to get gpio_keys working. I'm trying to use the overlay, which I have attached below, but after reboot there is no event node listed in "/dev/input/". (There is only one node named mice.) Inspecting dmesg, I found the following error messages: [ 1.529891] sun50i-h616-pinctrl 300b000.pinctrl: pin PC8 already requested by gpio-keys-user; cannot claim for 300b000.pinctrl:72 [ 1.529917] gpio-keys gpio-keys-user: failed to get gpio: -22 [ 1.529926] gpio-keys: probe of gpio-keys-user failed with error -22 Inspecting the dts file of my board (orange pi zero 2), I found that PC5,PC6 and PC8 are…

    ValdikSS

  36. Xamarin Android serial port reading doesn't work but writing

    Orange Pi Zero 2 · Started by kreestyahn,

    I cannot receive data on serial port ttyS5. I able to write onto it, but the reading doesnt work. I'm using this https://github.com/officialdoniald/Xamarin.Android.SerialPort . I tried using adb shell commands like "cat < /dev/ttyS5" but there is no received data either. When I try to send data with "LibSerialPort.WriteLine("text")" I can see it in Hercules Terminal so the writing works. In Visual Studio Output there is this line: [c.SerialPortPoc] type=1400 audit(0.0:532): avc: denied { read write } for name="ttyS5" dev="tmpfs" ino=2487 scontext=u:r:untrusted_app_27:s0:c512,c768 tcontext=u:object_r:serial_device:s0 tclass=chr_file permissive=1 app=SerialPortPoc.Ser…

    Werner

  37. What is the current status of WiFi on Orange Pi Zero 2?

    Orange Pi Zero 2 · Started by pprdr,

    Hello, I am wondering what is the current status of wifi on Orange Pi Zero 2? Is it working? If yes then on which release? If not then what are the current problems related to this? Is somebody working on it? How one could help to make it working? I am asking because I am a little bit confused because of this This topic is more than 2 years old but I see no update.

    Kiendeleo

  38. PINE A64 GPU hardware acceleration for movies

    Pine A64 · Started by Pander,

    How can PINE A64 GPU hardware acceleration be enabled? Playing a 24 fps full HD MP4 movie is not working smoothly. Here are some results on Armbian Jammy cli from June 30 version 22.05.3 with only installing via apt-get: - mpv, best result, probably ~10 fps - mplayer -vo sdl/fbdev2, probably ~5 fps - cvlc, probably 2~3 fps - kodi, probably 1~2 fps - gst123, could not get it running because issue with ALSA The fps are sort of guessed. Any other software and tips for testing are welcome. None of the movies playing played sound. speaker-test also did not play sound even though alsamixer showed all is well. Tips for this please too. …

    Pander

  39. Enable nftables for Orange Pi Zero 2

    Orange Pi Zero 2 · Started by yar83,

    Hi al!! I managed to find img with which my OPi Zero 2 starts, it's Armbian_22.02.2_Orangepizero2_focal_legacy_4.9.255. But it stops load after first `apt upgrade`. I've freezed kernel with armbian-config. Now I want to use wireguard + nftables. But everytime i'm trying to set wg up I've message: [#] nft -f /dev/fd/63 /dev/fd/63:1:1-26: Error: Could not process rule: Operation not supported ... Quick google search showed something concerning nf_tables module in kernel or something like this. (I'm not an experienced linux user). Is there any chance to set up my OPi Z 2 with wg + nftables? Thanks.

    • 1

      Reputation Points

    • 4 replies
    • 5k views
    Igor

  40. Possible missing firmware /lib/firmware/rtl_nic/rtl8156b-2.fw for module r8152

    Pine A64 · Started by sgjava,

    Latest Ubuntu Jammy CLI version and I get: update-initramfs: Generating /boot/initrd.img-5.15.48-sunxi64 W: Possible missing firmware /lib/firmware/rtl_nic/rtl8156b-2.fw for module r8152 after apt upgrade.

    sgjava

  41. USB to CAN adaptor

    Orange Pi Zero 2 · Started by Gabriel Zanetti,

    i've try to use a board usb to can, but every topic i see about can and armbian is with spi to can. I very beginner with sbc and armbian. This is the firmware it's runningin board usb-can https://github.com/candle-usb/candleLight_fw

    ALIGMSTEN

  42. Cannot boot into lvm encyprypted root partition

    Pine A64 · Started by linda,

    I cannot boot into lvm encyprypted root partition: mount: mounting "/dev/mapper/vg-root on /root failed: No such file or directory␍␊ Failed to mount "/dev/mapper/vg-root as root file system.␍␊ The flollowing step i made (short version) - create the lvm partition - mount lvm partition and and copy file system auf lvm partition, bind /dev, sys, proc - chroot in the lvm root partition (vg-root) - change /etc/fstab : insert /dev/mapper/vg-root / ext4 errors=remount-ro 0 1 UUID=<UUID-Partiion> /mnt/mnt ext4 defaults,noatime,nodiratime,commit=600,errors=remount-ro …

    linda

  43. no etho-network after upgrade

    Pine A64 · Started by linda,

    I'm using a Pine 64 LTS. For this I have downloaded the SoPine images Armbian_21.08.1_Pine64so_buster_current_5.10.60.img and Armbian_21.08.1_Pine64so_focal_current_5.10.60.img Both images boot normally (including network connection), but after the update (apt update, apt upgrade) no IP4 network connection is established for eth0. For help I am very grateful for any help.

    • 0

      Reputation Points

    • 2 replies
    • 2.7k views
    Pander

  44. Odd HDMI / Onkyo Receiver issue - Please Help!

    Pine A64 · Started by BJWTech,

    Hello all you awesome community members! So I got this Pine a64+ during their Kickstarter campaign. Initially I used it as a little play desktop. I never really found a use for it until very recently. I decided to use it as a little software Squeezebox client. I installed Armbian 22.04 server. I then setup alsa to use the HDMI audio as default output. I installed squeezelite and it immediately found and connected to my LMS (Logitech Media Server) running on my server. At this point I figured all was good. The sound was working great through my receiver. The next morning (Sunday) the kids could not get the TV sound to work. So of course …

    BJWTech

  45. First boot with only red LED

    Orange Pi Zero 2 · Started by Fuchsia,

    I can't boot orange pi zero 2 from first use... It displays only red LED and it doesn't change. I connected lan, SD card and power source. What is wrong with my orange pi?

    • 0

      Reputation Points

    • 4 replies
    • 12.1k views
    jscax

  46. Tips on configuring double spi (through two chipselects) on Orange Pi Zero 2.

    Orange Pi Zero 2 · Started by Dan Walton76,

    I've been able to get two /dev/spidev's working on Orange Pi Zero Plus 2 (H5) boards. How is configuring this on a Orange Pi Zero 2 (h616) going to be different or similar? Any tips for getting spi-double-spidev-cs.dts to work? Thanks so much,

    • 0

      Reputation Points

    • 12 replies
    • 12k views
    franz134

  47. Pi zero 2 first boot problem

    Orange Pi Zero 2 · Started by Никола Ивахнов,

    Hello. I try to install ambian https://www.armbian.com/orange-pi-zero-2/ to orange pi zero 2 and get there on first start: ▒[100]HELLO! BOOT0 is starting May 13 2020 14:10:04! [105]BOOT0 commit : 593cf83 [107]set pll start [110]periph0 has been enabled [113]set pll end [115]unknow PMU [117]PMU: AXP806 [124]vaild para:8 select dram para0 [127]board init ok [129]DRAM BOOT DRIVE INFO: V0.52 [132]the chip id is 0x5000 [135]chip id check OK [137]DRAM_VCC set to 1500 mv [141]read_calibration error [145]read_calibration error [149]read_calibration error [153]read_calibration error [157]read_calibration error [161]read_calibration …

    • 0

      Reputation Points

    • 7 replies
    • 8.4k views
    ALIGMSTEN

  48. Pine64 LTS - netwok driver for new hardware

    Pine A64 · Started by linda,

    Hello, I'm using a Pine 64 LTS with the SoPine image Armbian 21.02.3 Bionic with Linux 5.4.88-sunxi64 I have made various changes and installations to this image, so I want/need to continue using this image. Unfortunately, with the new hardware of the Pine 64 LTS (Pine64 LTS-V2) network connection is no longer possible. (Note: With the current SoPine image there is a network connection). Is there any way to reinstall the current network drivers in my image? I would be very grateful for any help.

    • 0

      Reputation Points

    • 3 replies
    • 3.4k views
    Alexander Ressler

  49. Orangepizero2 22.05 Jammy: is there a way to enable wifi interface?

    Orange Pi Zero 2 · Started by Jodaille,

    Hello, I have abandoned the Orangepizero2 I had bought months ago to use with Armbian, I have confused zero and zero 2. Seeing new release, I have just downloaded/install Armbian 22.05 Jammy. Install is ok, good work, thank you ! The wireless interface seems not enabled, I have looked at dmesg output and nmtui-connect. I could not find info about it, the board name doesn't help a lot. I understand the support of this board is pretty new. Is there a known technic to enable the wifi ? Have a nice day,

    ALIGMSTEN

  50. Compiling DTS with DTC

    Orange Pi Zero 2 · Started by ALIGMSTEN,

    Hi, hopefully some kind and more knowledgeable soul could provide some pointers, when trying to compile out of tree dts with dtsi includes on orangepizero2. I realise the included files must be pre-processed before compiled and have tried numerous approaches all which failed miserably by not being able to move beyond the following error. Error: dt-bindings/interrupt-controller/arm-gic.h:6.1-8 syntax error FATAL ERROR: Unable to parse input tree The relevant lines in arm-gic.h: #ifndef _DT_BINDINGS_INTERRUPT_CONTROLLER_ARM_GIC_H #define _DT_BINDINGS_INTERRUPT_CONTROLLER_ARM_GIC_H #include <dt-bindings/interrupt-controller/irq.h…

    • 0

      Reputation Points

    • 16 replies
    • 11.5k views
    ALIGMSTEN

  51. OrangePi Zero 2 Won't start with new FW

    Orange Pi Zero 2 · Started by Joey Pongallo,

    It looks like the May 28th release produced issues. I tried using the images on the OrangePI Zero 2 and the led only stays red. The prior version worked with no issue.

    Dominik

  52. OrangePi Zero 2 (4.9 kernel) does'nt boot after kernel upgrade 30.5.

    Orange Pi Zero 2 · Started by Goerlitzer,

    After upgrade at 30.5. I can't boot the orangepi zero 2 (4.9 kernel). Is there any possibility to reload the old kernel or other ways to fix it? Thanks in advance for answering. config-4.9.255-sun50iw9

    ALIGMSTEN

  53. Question about playing video

    Orange Pi Zero 2 · Started by mr412,

    Hi, does anyone have experience with video playback? is playing 1080p in anyway possible? Which image would you recommend for Orange Pi Zero 2 H616 1GB? Is a desktop x11 mandatory?

    sakesm

  54. Armbian Focal kernel 5.16.y not starting on Orange Pi Zero 2

    Orange Pi Zero 2 · Started by munecito,

    The stable armbian Focal image with Kernel 5.16.y fails to initialize the board. If I install the kernel 4.19.y image it does work in both Focal and Bullseye but when I try to change the kernel from armbian -config then it installs but on reboot it fails once again to reinitialise the board. I am using an orange pi zero 2 1gb. Just a couple of days ago Orange pi released two new images (Bullseye and Focal) with kernel 5.16 and 5.13 respectively. They do work and install. Although I would prefer to use armbian to the orange pi versions of it. Maybe someone can have a look at those two images to compare them with armbian to see where do they differ and why on…

    • 0

      Reputation Points

    • 3 replies
    • 4k views
    qiurui

  55. orange pi zero plus won't reboot after 'shutdown -r now', only shuts down.

    Orange Pi Zero Plus · Started by darsie,

    Orange pi zero plus 'shutdown -r now' shuts down, won't reboot within 20 minutes. Have to power cycle. reboot worked initially. I installed a few bits and firefox. Not sure what triggered it. In other reports I read kernel upgrades. Could it do a lengthy fsck during boot? 64 GB SD-card/file system. Would some (red or green) LED shine? It's all dark.

    • 0

      Reputation Points

    • 4 replies
    • 7.1k views
    schwar3kat

  56. Image won't boot for Orangepi Zero 2

    Orange Pi Zero 2 · Started by RayChang,

    Just tried the latest image for Orangepi Zero2, the Armbian Focal Image(Armbian_22.02.2_Orangepizero2_focal_edge_5.16.11.img Built March 7 2022) The board has startup issue, the serial output seems to load some files in wrong format: U-Boot SPL 2021.10-armbian (Feb 26 2022 - 17:45:38 +0000) DRAM: 1024 MiB Trying to boot from MMC1 NOTICE: BL31: v2.6(debug):510155aa-dirty NOTICE: BL31: Built : 17:45:34, Feb 26 2022 NOTICE: BL31: Detected Allwinner H616 SoC (1823) NOTICE: BL31: Found U-Boot DTB at 0x4a082570, model: OrangePi Zero2 INFO: ARM GICv2 driver initialized INFO: Configuring SPC Controller INFO: PMIC: Probing AXP305 on …

    • 1

      Reputation Points

    • 4 replies
    • 6.8k views
    Gunjan Gupta

  57. OPI-zero+ (H5) gpiodmon generates spurious Interrupts* upon invocation

    Orange Pi Zero Plus · Started by Hans Kurscheidt,

    I cut/paste a related information exchange I had w/ Kent from the gpiod mailing list. The arbian-monitor output is in the attached file. >>>>>>>> I wired a GPIO Pin to GND. Upon the cmd: sudo gpiomon -r -n1 -Bpull-up <chip> <offset> the program exits immediately with 1 event, although there was never a rising edge due to the fix wire to GND. Is this a feature or a bug, and is it reproducible? < Not a feature and not reproducible for me on a Raspberry Pi4 with the setup you describe, so probably a bug specific to your hardware platform, whatever that may be. If it is 100% reproduceable for you, and assuming it is a…

    Hans Kurscheidt

  58. Orangepi Zero2 bullseye image can't use

    Orange Pi Zero 2 · Started by TheOWL,

    I just download the image for Oranegpi Zero2 : Armbian 21.08 Bullseye Kernel 4.9.y, Size: 337Mb, Updated: Jan 24, 2022 And I use "usbimage" write the image to my SD card . And, nothing happen, Red LED and Green LED not lighting. Serial Port has no any message. I have 3 SD card, 2 Orangepi Zero2. All of it I test still failure. I have a older image for Orangepi Zero2 name "Armbian_21.08.1_Orangepizero2_buster_legacy_4.9.280.img.xz". This one is useful. BUT, can not "apt upgrade". If you do so , you cannot boot up next time. So I just confuse now......

    • 0

      Reputation Points

    • 3 replies
    • 4.7k views
    TheOWL

  59. ttyUSB missing on Orangepi zero 2

    Orange Pi Zero 2 · Started by myst,

    Hi, Im running Armbian_21.08.2_Orangepizero2_buster_legacy_4.9.255 on Orangepi zero 2. I don't see ttyUSB in my /dev/ but I can see it when I list usb : root@orangepizero2:~# lsusb Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 002: ID 0781:5591 SanDisk Corp. Ultra Flair Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Any Idea what should I do ? …

    myst

  60. Orangepi Zero 2 Armbian Focal 5.13.y stuck at "Starting kernel .."

    Orange Pi Zero 2 · Started by izeroo,

    Image used: Armbian_21.08.1_Orangepizero2_focal_edge_5.13.12.img U-Boot SPL 2021.10-rc1-armbian (Aug 08 2021 - 16:21:36 +0200) DRAM: 1024 MiB Trying to boot from MMC1 NOTICE: BL31: v2.5(debug):87311b4-dirty NOTICE: BL31: Built : 16:21:30, Aug 8 2021 NOTICE: BL31: Detected Allwinner H616 SoC (1823) NOTICE: BL31: Found U-Boot DTB at 0x4a082220, model: OrangePi Zero2 INFO: ARM GICv2 driver initialized INFO: Configuring SPC Controller INFO: PMIC: Probing AXP305 on RSB INFO: PMIC: aldo1 voltage: 3.300V INFO: PMIC: aldo2 voltage: 3.300V INFO: PMIC: aldo3 voltage: 3.300V INFO: PMIC: bldo1 voltage: 1.800V INFO: PMIC: dcdcd voltage: 1.500V IN…

    • 0

      Reputation Points

    • 1 reply
    • 4.9k views
    izeroo

  61. pcm5102a playback device not found on Pine64 (A64)

    Pine A64 · Started by joho500,

    Hello, I have a Pine64 board and recently added an audio POT with the pcm5102a chipset. It is rather difficult to get the board working/recognized. I found info on the forum saying one has to do stuff with the overlay system but only for other boards than the Pine64 and I can't get it right. aplay -l: root@pine64:~# aplay -l **** List of PLAYBACK Hardware Devices **** card 0: sun50ia64audio [sun50i-a64-audio], device 0: 1c22c00.dai-sun8i-codec-aif1 sun8i-codec-aif1-0 [1c22c00.dai-sun8i-codec-aif1 sun8i-codec-aif1-0] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: sun50ia64hdmi [sun50i-a64-hdmi], device 0: 1c22800.i2s-i2s-hifi i2s-hifi-0 [1c…

    joho500

  62. [Invalid] - How to program emmc memory in Allwinner A64

    Pine A64 · Started by Atreyo tech,

    Hello, I am using Allwinner A64 processor for my use case. In that, I want to flash my custom os into emmc memory which is alredy worked in SD card. Currenlty we go thorugh below link: https://wiki.pine64.org/index.php/NOOB#Instructions_to_Flashing_eMMC_Modules we follow "xzcat imagename.img.xz | sudo dd of=/dev/mmcblk1 bs=1M status=progress conv=fsync" this command but we got input/out error while reading memory. Please check below screenshot.

    • 0

      Reputation Points

    • 1 reply
    • 3k views
    Werner

  63. Libre Computer Tritium H5 does not boot from eMMC

    Libre Tritium H5 · Started by RussianNeuroMancer,

    Hello! I have three Libre Computer Tritium H5 boards and three eMMC modules on hands. All three eMMC modules is flashed with exactly same Armbian image and exactly same uboot. I also use exactly same PSU and cable for all three boards (however I reproduced this issue with four PSU and three microUSB cables, no difference in behavior was found). All three boards start just fine from microSD (so it's not exactly "Your board doesn't work?" case). One board never boot from eMMC on first power up, but almost always boot on second power up. That reproducible with all three eMMC modules. Two other boards just never boot from any eMMC module…

    Da Xue

  64. [Invalid] - Kernel sources and rebuild process for pine64

    Pine A64 · Started by Atreyo tech,

    Hi, I brought new pine64 board and installing OS in SD card. This OS considering kernel 5.10.34 and now I want to modify some of the kernel features. For that, please guide me how to download kernel source and rebuild it for pine64.

    • 0

      Reputation Points

    • 1 reply
    • 2.9k views
    Werner

  65. 5.10 kernel mipi dsi command mode(pine a64)

    Pine A64 · Started by jam,

    I have looked up relevant information on Google. Since 5.6, pine a64 already supports dsi in the kernel mainline.And the Feiyang FY07024DI26A30-D 7inch MIPI-DSI LCD Panel driver and dts already released. But the 7inch lcd above is a video mode panel.I can not found any information about the command mode panel. Is pine a64 mipi-dsi supports command mode from the kernel mainline? Any help is appreciated!!

    • 0

      Reputation Points

    • 0 replies
    • 2.6k views
    jam

  66. a64 (pine64) upgrading armbian-bsp-cli-pine64 threatens to remove linux-focal-root-current-pine64

    Pine A64 · Started by Learnincurve,

    Hi, Just want to check what the recommended approach is with today's dist-upgrade. I noticed that armbian-bsp-cli-pine64 was held back, so tried a manual install to see what the problem was. Seems like apt wants to remove linux-focal-root-current-pine64 to upgrade armbian-bsp-cli-pine64. Is this a temporary dependency issue? Obviously not performing the upgrade unless informed of the correct approach. BR.

    • 0

      Reputation Points

    • 1 reply
    • 3.1k views
    Igor

  67. Pine A64-LTS not booting after apt-get upgrade Armbian 10.7 to 10.9

    Pine A64 · Started by Patrick Peters,

    I recently upgraded my working Pine A64-LTS board to Armbian 10.9 by using standard 'apt-get update' followed by 'apt-get upgrade' The update went fine (no error messages) and i rebooted the unit. The unit was unable to mount the root filesystem it complaint about UUID probably incorrect, but this was not the case. After doing some research i found out that the DTB file was changed on the mmc0 part. The option 'non-removable' was removed wich let to the kernel using the PUSH-PUSH routine? cd pins to see if a SD card is present. It looks like it that not all versions of the Pine A64-LTS have this pin or maybe in the past …

    Patrick Peters

  68. Pine A64 LTS boots from SD, but once booted, the SD device is MIA

    Pine A64 · Started by goathunter,

    Yesterday, I upgraded my Pine A64 LTS to the 5.10.21 kernel: The system rebooted just fine, though took longer then before. I didn't realize why until today, when I tried to access /media/mmcboot and discovered that it wasn't there. In fact, there is no /dev/mmcblk0p1 device at all. It's bizarre: it boots from the MicroSD, switches to my SSD, but then the MicroSD card device is simply gone when the system is up. I do not see this on two other Pine A64 (not LTS) systems. I was able to mount the microSD card on one of the other systems, and fsck reported everything was fine. I could also see all of the files just fine. The files …

    goathunter

  69. C # or python library for Orange pi zero2 H616

    Orange Pi Zero 2 · Started by Minh Võ,

    I am looking for support library for GPIO, SPi for Orange pi zero2 H616. I searched everywhere but found only 1 library https://github.com/orangepi-xunlong/wiringOP. I tested by flashing one led but stopped like the GPIO pins are the same? I don't know what's going on here? Is there a library to support me?

    Werner

  70. RESOLVED: a64-pine64+ goodix touchscreen (i2c) fails to load on reboot

    Pine A64 · Started by Learnincurve,

    5.10.4-sunxi64 pine64 board with goodix 7" mipi-dsi LCD touchscreen. The LCD output is working fine across reboots after enabling the dt overlay using armbian-config. For the touchscreen, I have added "goodix" to /etc/modules and the digitizer works fine from all cold boots: ~$ dmesg | grep -i goodix [ 5.836601] Goodix-TS 1-005d: supply VDDIO not found, using dummy regulator [ 5.843605] Goodix-TS 1-005d: ID k}\xfa, version: 7b6f [ 5.866815] input: Goodix Capacitive TouchScreen as /devices/platform/soc/1c2ac00.i2c/i2c-1/1-005d/input/input5 but a reboot leads to either: [ 5.856172] Goodix-TS 1-005d: supply VDDI…

    Learnincurve

  71. Time to update the download page for pine64?

    Pine A64 · Started by Learnincurve,

    Hi, Thanks to the hard work of your team, the Pine64-plus touchscreen now works great with the mainline kernel and legacy images are no longer listed in the download options, but it looks like some of the instructions at https://www.armbian.com/pine64/ are still referring to the "old way" of doing things: ie: Pine64’s own LCD with touchscreen support can simply be activated in /boot/armbianEnv.txt by setting pine64_lcd=on and adding gt9xxf_ts to /etc/modules followed by a reboot. The LCD screen is now activated by manipulating the DT overlays, which can even be done from armbian-config - hardware, and the touchscreen module is…

    • 0

      Reputation Points

    • 2 replies
    • 4.1k views
    Learnincurve

  72. Boot problem after upgrade to linux-image-current-sunxi64_20.11.7

    Orange Pi Zero 2 · Started by rusatch,

    Please help. Board: orange pi zero 2+ h5 Upgraded packages(from apt upgrade): Get:1 http://security.debian.org buster/updates/main arm64 libp11-kit0 arm64 0.23.15-2+deb10u1 [303 kB] Get:2 http://httpredir.debian.org/debian buster-updates/main arm64 tzdata all 2020e-0+deb10u1 [266 kB] Get:4 http://security.debian.org buster/updates/main arm64 nodejs arm64 10.23.1~dfsg-1~deb10u1 [87.3 kB] Get:5 http://security.debian.org buster/updates/main arm64 libnode-dev arm64 10.23.1~dfsg-1~deb10u1 [397 kB] Get:6 http://security.debian.org buster/updates/main arm64 libnode64 arm64 10.23.1~dfsg-1~deb10u1 [5,280 kB] Get:3 https://mirrors.dotsrc.org/armbian…

    • 0

      Reputation Points

    • 5 replies
    • 4.9k views
    Igor

  73. Audio jack on Pine64 A64+

    Pine A64 · Started by CeeGO,

    Hi, I just installed the Armbian on a Pine A64+ (Armbian Focal, mainline based kernel 5.9.y). I'm having trouble getting audio from the 3.5mm stereo output. I've tried several things, including a speaker test: speaker-test -c 2 -Dsysdefault:sun50ia64audio I tried editing /etc/asound.conf but it doesn't seem to affect anything. Do changes to that file apply instantly? What can I do to test/diagnose the issue?

    Pander

  74. Pine64 kernel panic after power failure

    Pine A64 · Started by mustha,

    I have been running Armbian on a headless Pine64 (the kickstarter one) for quite sometime without any issues. Last week I woke up in the morning and noticed that there had been a power cut. The Pine64 was on again but I couldn't SSH into it. I plugged a monitor and found the system hangs while booting with the following error: Error while loading shared libraries: lib system-shares-241.so: cannot open shared object file: No such file or directory Kernel panic - not syncing: Attempted to kill init! exitcode=0x00007f00 CPU: 1 PID: 1 Comm: init Not tainted 5.4.43-sunxi64 #20.05.2 Hardware name: Pine64+ (DT) Call trace: dump_backtrace+0x0/0x180 show_stack+0x14/0x20 dump_s…

    • 0

      Reputation Points

    • 1 reply
    • 2.8k views
    Igor

  75. usb gadget, g_ether.. on tritium h5?

    Libre Tritium H5 · Started by WilsonEvans,

    Hi all, I've read on the forum that support for usb gadget using the µ-usb port on the libre computer tritium needed a kernel reconfigure & recompile. I tried to start with that, but during configuration, I've seen full support already. So, was it supposed to just work ? I target armbian buster server variant. my need is to use IP over an usb (and power) cable between a linux machine (x86 and then arm) and a tritium h5 Thanks in advance

    TRS-80

  76. RESOLVED: a64 (pine64) dt bindings for cir?

    Pine A64 · Started by Learnincurve,

    Hi, Thank you all for so much work to fully implement the mainline kernel for the Pine64! So much is now working out-of-the-box with armbian, that there is no need to use the legacy version based on kernel 3.10. The pine64 does have CIR capabilities and the sunxi-cir kernel module is available, but we are still missing DT bindings for the device, although I see that an overlay file is present for the h5: /dts-v1/; / { compatible = "allwinner,sun50i-h5"; fragment@0 { target = <0xffffffff>; __overlay__ { pinctrl-names = "default"; …

    • 0

      Reputation Points

    • 1 reply
    • 2.8k views
    Learnincurve

  77. PineH64-b has no audio device, is it expected?

    Pine A64 · Started by delius,

    Hi, Armbian gurus. I tried latest Armbian image for PineH64-b. (Armbian_20.11_Pineh64-b_focal_current_5.8.16_desktop) And I surprisingly found there is no audio device when I looked around.( by #aplay -l ) Is this expected for now? My older 5.6 kernel has HDMI device at least. I tried search audio problem around but had no discover so far. Please allow me to confirm with you. I'm looking for a good 5.8 multimedia-capable kernel to merge with my gentoo rootfs. Thank you.

    • 0

      Reputation Points

    • 4 replies
    • 3.2k views
    Pander

  78. OrangePi Zero2 - Allwinner H616

    Orange Pi Zero 2 · Started by Werner,

    Before complaining about an issue read this! tl;dr: Put your Zero2 and/or any other H616 based device on the shelf and WAIT for proper support to come. And no. There is no ETA. Assuming usable state end 2021/beginning 2022. Software support is still work in progress and under heavy development. Provided preview images can break any time. Do not report this, we are aware of that and can/will not help you with that if you are not willing to investigate and research by yourself. Feel free to join fellow developers to their efforts to create proper software support. But don't waste our time with complains. Thank you! https://github.com…

    Werner

  79. Missing kernel module s5k4ec

    Pine A64 · Started by Pander,

    For PINE A64 with Ubuntu Focal (stable and nightly) with a 5 MP camera, the documentation states to add camera_type=s5k4ec to /boot/armbianEnv.txt and reboot. After rebooting, the kernel module is not available. modinfo s5k4ec returns: modinfo: ERROR: Module s5k4ec not found. The file /boot/config-5.9.8-sunxi64 shows that only camera sensors OV2640 and MT9V011 are available and CONFIG_VIDEO_S5K4ECGX is not set. Is this an issue with the build?

    TRS-80

  80. Olimex LCD Panel Support for A64

    Pine A64 · Started by Digitalman1983,

    LCD support does not appear to be working in the latest builds (stable kernel 5.8.6, development kernel 5.9.7) My understanding is that this has been an issue for a while with A64 boards, specifically the Pine64, but that it was working at one time. Here's what I've tried so far: -Followed instructions at https://docs.armbian.com/Hardware_Allwinner/ and added "setenv video-mode sunxi:480x272-24@60,monitor=lcd,hpd=1,edid=1" to boot.cmd and put "saveenv" at the end, re-compiled boot.scr -Did a modprobe of panel-olimex-lcd-olinuxino -Rebooted several times -Ensured that LCD jumper was closed and verifie…

    Digitalman1983

  81. Pine64+ A64 Kernel 5.9.x analog sound problem

    Pine A64 · Started by Levent Erenler,

    Hi, I try to enable sound on headphone jack with pine64+ but i could not Alsa says "no sound found" at dmesg Could anyone help me? Thank you root@pine64:~# dmesg|grep -i sound [ 2.686397] No soundcards found. [ 6.323086] input: sun50i-a64-audio Headset Jack as /devices/platform/sound/sound/card0/input5 root@pine64:~# aplay -l **** List of PLAYBACK Hardware Devices **** card 0: sun50ia64audio [sun50i-a64-audio], device 0: 1c22c00.dai-sun8i-codec-aif1 sun8i-codec-aif1-0 [1c22c00.dai-sun8i-codec-aif1 sun8i-codec-aif1-0] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: sun50ia64hdmi [sun50i-a64-hdmi], device 0: 1c22800.i2s…

    • 1

      Reputation Points

    • 11 replies
    • 8.6k views
    Pander

  82. tritium-h3, make image from sd card, then write this image to new sd card. occur FDT_ERR_BADMAGIC error

    Libre Tritium H3 · Started by wenli,

    error log: Found mainline kernel configuration 31792 bytes read in 15 ms (2 MiB/s) libfdt fdt_check_header(): FDT_ERR_BADMAGIC No FDT memory address configured. Please configure the FDT address via "fdt addr <address>" command. Aborting! SCRIPT FAILED: continuing... …

    Werner

  83. Downgrade kernel 5.8* on Pine64+

    Pine A64 · Started by brm,

    Hi. I am getting a kernel Oops in the Pine64+ . . . .see below. Kernel is 5.8.13-sunxi64. It was installed after a recent update. I would like to drop back to the previous kernel if possible. Does this seem like a reasonable search term for a suitable kernel? Any ideas on searching and installing a previous kernel appreciated. sudo apt-cache search kernel 5.8* | grep sunxi64 linux-dtb-current-sunxi64 - Linux DTB, version 5.8.13-sunxi64 linux-dtb-dev-sunxi64 - Linux DTB, version 5.9.0-rc7-sunxi64 linux-dtb-legacy-sunxi64 - Linux DTB, version 5.4.62-sunxi64 linux-headers-current-sunxi64 - Linux kernel headers for 5.8.13-sunxi64 on arm64…

    • 0

      Reputation Points

    • 3 replies
    • 4.7k views
    Igor

  84. How to upgrade ARMBIAN kernel on PINE A64+ board ?

    Pine A64 · Started by SR-G,

    Hello. I'm a bit confused, i have a PINE64 board ("PINE A64+", 2GB mem.) (this one : https://www.pine64.org/?product=sopine-a64-baseboard-combo) I installed some years ago ARMBIAN on it - everything is running fine. But i'm still on kernel 3.X something : ``` uname -a Linux pine64 3.10.107-pine64 #2 SMP PREEMPT Fri Feb 8 10:23:10 CET 2019 aarch64 GNU/Linux cat /etc/armbian.txt ------------------------------------------------------------------------------- Title: Armbian 5.73 Pine64 Debian jessie default Kernel: Linux 3.10.107 Build date: 28.01.2019 ... ``` …

    • 0

      Reputation Points

    • 4 replies
    • 5k views
    Igor

  85. Pine64: can't hear audio on headphone plug

    Pine A64 · Started by Amarok77,

    I'm running Armbian 20.08 Focal on a Pine64 with 2GB RAM. Mostly everything runs fine, but I do have a problem with getting audio out of the headphone plug. In pavucontrol I can see audio is playing (an internet stream) on Built-in Stereo, but nothing can be heard when connecting speakers. To be clear: I don't want audio out of HDMI, but just from the headphone plug. I have also played around with alsamixer and unmuted everything that was muted and turning up the volume, but still no audio to be heard... Has anybody gotten this to work?

    • 0

      Reputation Points

    • 2 replies
    • 3.5k views
    Pander

  86. Latest 20.04 image on Pine64+ no audio

    Pine A64 · Started by Jose,

    Hello, I downloaded the latest 20.04 image for Pine64+ and I am not getting any audio from youtube for example. I can see in the Volume Control window in the Output panel an audio level meter moving and the application Chromium. But still get no audio from the TV.

    • 0

      Reputation Points

    • 1 reply
    • 2.4k views
    Pander

  87. Pine A64 LTS V1.2 LCD DSI Boot Issue

    Pine A64 · Started by mudcat,

    I just received my Pine A64 LTS V1.2 board, 7" LCD TOUCH SCREEN PANEL, and playbox enclosure. I flashed an sd card with Linux Armbian Focal: https://dl.armbian.com/pine64so/Focal_current If the LCD is connected via the DSI port, the boot freezes during UBoot. If I disconnect the LCD from the DSI connector, we get past the first part of UBoot immediately and it eventually brings me to the login prompt. I do observe that the green power LED appears to light then turn off about when it freezes on boot with the DSI connector attached. I have the official 5 V 2 A SOPINE supply from the store (https://store.pine64.org/product/sopine-baseboard-us-p…

    mudcat

  88. armbian orange pi one stuck

    Orange Pi One · Started by justin256,

    Hi, I am new to all this and I have downloaded everything to my sd card. When I power on the board it gets stuck on "started update UTMP about system runlevel changes" and does nothing more. some images at https://imgur.com/92ZOiwD

    Stephen Graf

  89. usb gadget, g_ether.. on tritium h5

    Libre Tritium H5 · Started by ravelo,

    Hi all, I've read on the forum that support for usb gadget using the µ-usb port on the libre computer tritium needed a kernel reconfigure & recompile. I tried to start with that, but during configuration, I've seen full support already. So, was it supposed to just work ? I target armbian buster server variant. my need is to use IP over an usb (and power) cable between a linux machine (x86 and then arm) and a tritium h5 Thanks in advance

    • 0

      Reputation Points

    • 4 replies
    • 6k views
    usual user

  90. Configure LCD in U-boot for Orange pi zero plus

    Orange Pi Zero Plus · Started by Waelabd,

    I am trying to configure a splashscreen in u-boot on an orange pi zero plus using Armbian. The screen is connected through spi1 using the ST7789v chip of the LCD. I have successfully configured the screen when the kernel is loaded. I already have used systemd to display a splashscreen however I find it slow to display something. It display something only after ~12 sec. I could probably reduce that time a bit by loading the service earlier but it would never start in 5 sec. I have tried unsuccessfully to activate CONFIG_VIDEO_LCD_MODE (VIDEO_LCD_MODE) in u-boot which allow to configure an LCD. It seems that it is not allowed because it d…

    • 0

      Reputation Points

    • 1 reply
    • 4k views
    tipine9824

  91. pine64 bluetooth firmware config file missing

    Pine A64 · Started by eminguez,

    After a fresh armbian installation + armbian-firmware-full package, the pine64 bluetooth doesn't work because the rtl8723bs_config-pine64.bin file is missing. I've downloaded the file from https://github.com/anarsoul/rtl8723bt-firmware/tree/master/rtl_bt into /lib/firmware/rtl_bt and it works so I've created a PR here https://github.com/armbian/firmware/pull/14 to add it to the firmware package so it can work out of the box. Let me know if I need to do something else for the PR to be merged. Thanks.

    eminguez

  92. pine 64so Pine64, bananapi M64

    Pine A64 · Started by constantius,

    pine 64so Pine64, bananapi M64 images 19.11.3, GUI XFCE 4.12 dont not run after upgrade images 20.02 GUI does not work from begining after installed. Never mind i build 19.11.5 kernel 5.4.18 and works

    constantius

  93. Pine64 H64 model-B case modding.

    Pine A64 · Started by __Dirk__,

    Hi, Since I still couldn't find a enclosure for my Pine64 H64 model-B, I mocked up one myself using a Eur 6,50 Raspberry Pi 4 case. 1) From the USB/ETH connector side I cut out the sections in between the connectors since there is a small offset that pushes the Pine64 board aside when closing the case. 2) From one of the cover lulls, I cut out a section to fit over the IR sensor. 3) On the HDMI side I cut out the two ports holes of the RPI micro hdmi connections and I made a notch in the USB-C hole to fit the power connector of the Pine64. 4) Drilled a hole in the cover large enough for the WIFI/BT antenna connector, on the board,…

    • 0

      Reputation Points

    • 1 reply
    • 3.3k views
    jeanrhum

  94. Pine A64 no HDMI signal

    Pine A64 · Started by klode82,

    After a reboot, my HDMI does not send anymore signal. The resolution of my desktop (using x11vnc) is 1024x768. This is the pastebin from dmesg: dmesg from Pine64 There are some error on sunxi8. Can someone help me?

    jernej

  95. Finally.... got Bluetooth working on Pine64 H64 model-B

    Pine A64 · Started by __Dirk__,

    All, Don´t know if anybody else did it... but I got Bluetooth running by modifying the device tree and adding support for communication between the RTL8723BS and UART1 and loading the needed RTL8723B firmware. Distro: Armbian Buster Kernel version: 5.4.30-sunxi64 This is how I did it: 1) Create a patch (xx.patch) with the next content and place it in ~/build/userpatches/kernel/sunxi-current/ --- a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts 2020-04-06 12:37:45.584912094 +0200 +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts 2020-04-06 12:37:45.584912094 +0200 @@ -498,6 +498,21 …

    Igor

  96. OV5640 device tree overlay for OrangePi One H3

    Orange Pi One · Started by rreignier,

    Hi! Now that the camera interface has been merged in mainline Kernel, I would like to try to use the OrangePi OV5640 camera module on my OrangePi One. So with the latest Armbian Bionic (20.02.1, kernel 5.4.20), I have been trying to get a device tree overlay. But for now, it fails to compile with: $ sudo armbian-add-overlay sun8i-h3-csi.dts Compiling the overlay Error: sun8i-h3-csi.dts:27.23-24 syntax error FATAL ERROR: Unable to parse input tree Error compiling the overlay My current overlay looks like this: /dts-v1/; /plugin/; / { compatible = "allwinner,sun8i-h3"; fragment@0 { target = <&pio>; __overlay__ { …

    bschwand

  97. Pine64-LTS getting all serial ports to work.

    Pine A64 · Started by Patrick Peters,

    I am currently using the Armbian 20.02 release and doing some tests with the serial ports of a Pine64-LTS board. I noticed that i could not get all the serial ports to work. I needed to make a couple of changes in order to get them all working. Maybe i did something wrong and my changes were not needed, but i still would like to list them here in order to help other users who are having problems with the serial ports. When first starting up the armbian release i used the armbian-config tool to enable the uart 1, uart 2, uart 3 and uart4. I rebooted but noticed not all ports where present. I noticed a message in the dmesg log showi…

    • 0

      Reputation Points

    • 2 replies
    • 4k views
    Patrick Peters

  98. Pine64 armbian IR support fixed by me

    Pine A64 · Started by Szabolcs Diós,

    Dear friends! I have a project, where I needed to use 4 infrared receivers and 2 transmitters connected to GPIO. After a lot of research I realized how to cook all stuffs together: So I have Pine64 A64 512MB cards (not the plus model), running Armbian 20.05.0-trunk.038 nightly, (uname -r: 5.4.18-sunxi64). I needed to freeze upgrades for two reasons: Boot hangs up: The armbian thinks that I have the plus model: on every upgrade I need to replace the "sun50i-a64-pine64-plus.dtb" file with "sun50i-a64-pine64.dtb" at /boot/dtb/allwinner because the non-plus model (512MB) has different ethernet hardware. Missing gpio-ir-recv kernel module from stock A…

    vr1152

  99. Pine64-LTS high kworker load with cpufreq problems after upgrade to 20.02.1

    Pine A64 · Started by Patrick Peters,

    I am using Armbian Buster on Pine64-LTS units. I recently upgraded version 19.11.3 to 20.02.1 and since having problems with high kworker load and strange warning in dmesg output: [ 7.734729] ------------[ cut here ]------------ [ 7.737084] WARNING: CPU: 1 PID: 30 at drivers/clocksource/arm_arch_timer.c:360 sun50i_a64_read_cntpct_el0+0x24/0x30 [ 7.738928] Modules linked in: cpufreq_dt realtek axp20x_usb_power industrialio pinctrl_axp209 dw_hdmi_cec lima dw_hdmi_i2s_audio gpu_sched dwmac_sun8i mdio_mux [ 7.741485] CPU: 1 PID: 30 Comm: kworker/1:1 Not tainted 5.4.20-sunxi64 #20.02.1 [ 7.743435] Hardware name: Pine64 LTS (DT) [ 7.745514] Wor…

    • 0

      Reputation Points

    • 4 replies
    • 5k views
    Patrick Peters

  100. Pine64/Sopine + Waveshare Rpi LCD's

    Pine A64 · Started by Gavinb,

    I'm currently looking into a new project which will use (hopefully) the Rpi Waveshare hdmi based 4" lcd touch screen, linked to the pine64/Sopine I'm at research stage, and will be looking into using a current 5.x kernel. If anyone has any info on the waveshare lcd's I need to watch out for or suggestions to get further info (specifically the touch driver side), please post a response. Progress on the project will be posted here, links will be added once I have some basics running. This can hopefully open up the waveshare displays to other devices. @Igor Yes I've read This post but am willing to do what I can to get Armbian to support the d…

    Gavinb

Account

Navigation

Search

Search

Configure browser push notifications
Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.