Rockchip

Hi, I really like the new option to use DT Overlays on the tinkerboard. But right now I'm struggeling a little with it: I have an old installation with 5.60 which I updated to 5.70 via apt. But the /boot/boot.cmd is still the old one and the Overlays are not working. Maybe I'm blind, but I do not see, how to update u-boot and the boot.cmd as part of it via armbian-config. Can someone point me to the right direction? Thanks, Alex

• 0

  Reputation Points

• 2 replies
• 3.4k views

deimos

January 25, 20197 yr

hi i can not get my ethernet to work with img Armbian_5.72_Tinkerboard_Debian_stretch_next_4.19.16_desktop me lost !

• 1

  Reputation Points

• 11 replies
• 5.4k views

chrish

January 19, 20197 yr

Hello, Has anyone managed to get usb-redirector working? 4.14.70-rockchip and headers. with 'arm' It installs ok, and the driver loads... lsmod and dmesg confirms. Module Size Used by tusbd 126976 0 but when I try one the binaries, it just returns me back to the prompt.??? (i've tried other versions arm-eabi. armeb, that just returns file not found when using a binary) Many thanks. Mark

• 0

  Reputation Points

• 5 replies
• 3.5k views

MarkA007

March 14, 20197 yr

There's a few problems with the UART driver on 5.0-rc2 kernels, since proper checks are not done correctly and lead to a Null Pointer dereference. Here's a patch to avoid this issue : From 7e43ae8446b420907f00b43308ad0b99b6fe4e51 Mon Sep 17 00:00:00 2001 From: "Miouyouyou (Myy)" <myy@miouyouyou.fr> Date: Wed, 16 Jan 2019 23:58:52 +0100 Subject: [PATCH] drivers: tty: serial: Bail out if no UART is detected Before the 5.0, serial8250_register_8250_port consisted of one BIG if(uart && uart->port.type != PORT_8250_CIR) block, which prevented NULL dereference if uart, a pointer to an "uart_8250_port" detected through "serial8250_find_ma…

• 0

  Reputation Points

• 1 reply
• 2.5k views

Myy

January 17, 20197 yr

Tinkerboard (old one, not S) to be used as x2go thin client. Installed latest image (5.70_Tinkerboard_Ubuntu_bionic_next_4.19.14_desktop), applied all updates. Working fine (thanks to everybody who contributed). Issue remaining: My Tinkerboard refuses to use the monitor's native display size of 1920x1200, tried several monitors and cables (HDMI to DVI adapter cables, in case this is relevant). Without any modifications, Armbian desktop comes up with 1280x960. I used xrandr to set 1920x1080 (works), but 1920x1200 leads to "xrandr: Configure crtc 0 failed". Any chance to resolve this?

• 0

  Reputation Points

• 2 replies
• 4k views

Azq2

March 21, 20197 yr

Which Os does support hardware encode h264\h265 ? Or where i can read about status supporting hardware encoding for video (h264\265) and image (jpeg) ? chip: RK3288

• 0

  Reputation Points

• 1 reply
• 3k views

TonyMac32

January 18, 20197 yr

I bought a Tinkerboard S and Tinker Aluminum case yesterday, but because of the case, it's Wifi function is almost non-exist, so I bought a TP-LINK TL-WN722N v2 two hours ago. I was hoping to get a V1, which has a lot of information on Wikidevi, and looks like it's going to work out-of-the-box, but I got a v2, and now I'm trying to get it to work. Wikidevi provided a link to driver repository, I downloaded main branch and type "make all" in terminal, it says /lib/modules/4.4.166-rockchip/build does not exist. I tried to search how to install kernel header and tried this command "sudo apt-get install linux-headers-$(uname -r)", it doesn't work/help. …

• 0

  Reputation Points

• 1 reply
• 4.2k views

axzxc1236

January 16, 20197 yr

Hi, I am using rockpro64 "https://www.pine64.org/?product=rockpro64-4gb-single-board-computer" that uses Rockchip RK3399 Hexa-Core (dual ARM Cortex A72 and quad ARM Cortex A53) 64-Bit Processor. My simple application is to have a UART communication. When i run serial write with 1500000 Baudrate, then it works fine. But if i lower the baudrate such as 115200, then it throws garbage value. So can i get some suggestions here? Thanks.

• 0

  Reputation Points

• 4 replies
• 6.5k views

chwe

January 16, 20197 yr

Hi all, first post here so please forgive me if I've get any bits wrong. Thanks for all the work put into supporting this project, and thanks in advance for any and all considerations extended in helping me step through my issue here. so i've had an 8 node kubernetes cluster running fairly smoothly on my tb's for nearly a full year now, so far I have not had any major issues with armbian updates until this weekends... I did a round of updates to my cluster and, after rebooting all 3 of my model S tinkerboards seem bricked (redlight only, no output to HDMI).. The remaining five orig TB models with Samsung EVO SD's all came up without issue... s…

• 1

  Reputation Points

• 31 replies
• 17.6k views
• 2 followers

TonyMac32

January 17, 20197 yr

THE MEDIA SCRIPT IS DEPRECATED, IN FAVOR OF THE LEGACY MULTIMEDIA INTEGRATION. PLEASE REFER TO THIS TOPIC: So finally we have the first version of: The UN-official, UN-supported, etc... RK3399 MEDIA TESTING SCRIPT This is the first release of the RK3399 media testing script. The script provides a functionality similar to its RK3288 equivalent: Installing all the libraries and system configurations necessary for GPU accelerated X desktop, Chromium WebGL, full VPU video play acceleration up to 4k@60 10-bit HEVC (the maximum supported by the SoC), and GLES 3.2 / OpenCL 1.2 support. Three video players supporting full VPU accel…

• 1

  Reputation Points

• 118 replies
• 134.1k views
• 13 followers

JMCC

December 17, 20205 yr

Saw this over on the LKML... some folks might be interested in this one... http://lkml.iu.edu/hypermail/linux/kernel/1901.0/02233.html Changes checked in against staging... staging: video: rockchip: video codec for vendor API staging: video: rockchip: fixup for upstream staging: video: rockchip: add video codec arm64: dts: rockchip: add video codec for rk3399

• 0

  Reputation Points

• 1 reply
• 4.3k views

TonyMac32

January 7, 20197 yr

Running Armbian Desktop stable 4.14y my Tinkerboard sees the WiFi network but refuses to connect. It has worked with TinkerOS so I don’t think it’s hardware related and Iknow the passcode and WPA settings look right. When I try to connect it spins and then fails after timing out. armbianmonitor -u output (with ethernet attached) http://ix.io/1x1J I’m probably just missing something stupid. Suggestions?

• 0

  Reputation Points

• 0 replies
• 2.3k views

WZ9V

December 29, 20187 yr

I need to get a driver working on my ROC renegade with DKMS. However, the kernel headers provided by the repository: linux-headers-rockchip64 - Linux kernel headers for 4.4.156-rockchip64 on arm64 do not match the kernel provided by the repository: linux-image-rockchip64 - Linux kernel, version 4.4.162-rockchip64 This is after updating the cache just now and yes, both packages are installed. Is there some way I can guarantee that the version of my installed kernel and headers always match (apart from compiling them myself)? There is no linux-image-next package for rockchip64 and I'm hesitant to install the nightly release.

• 0

  Reputation Points

• 0 replies
• 3.2k views

liakhova

December 22, 20187 yr

Hi Igor and all, back after a long absence, Have been using Cubie2s since 2015, rock solid with Armbian. I've now moved as cubies don't support gigabit, and the Pi gigabit interface is limited. So I now have a tinkerboard and popped Stretch mainline kernel 4.14.y onto an SDcard. Linux tinkerboard 4.14.67-rockchip #88 SMP PREEMPT Wed Aug 29 15:07:29 CEST 2018 armv7l GNU/Linux I want to compile the faithfull usb-redirector against the headers, but sudo apt-get install linux-headers-`uname -r` results in not found. Bit of noob question, but I've trawlled around, but can't seem to find source/headers or should I move to a diffrent version? Mark

• 1

  Reputation Points

• 2 replies
• 3.3k views

MarkA007

December 21, 20187 yr

I need one more component working. 3D and OpenCL. Has anyone successfully installed Panfrost on a RK3399 board ? Update! I manged to build the Panfrost X11 driver. Here's how I did it: https://panfrost.freedesktop.org/building-panfrost-mesa.html Before you create the build directory update the meson_options.txt file change platforms from auto to x11 change dri_driver from auto to swrast change gallium-drivers to panfrost cd to the build directory meson .. . -Ddri-drivers= -Dvulkan-drivers= -Dgallium-drivers=panfrost -Dlibunwind=false --prefix=/{wherever you want} ninja install …

• 1

  Reputation Points

• 28 replies
• 28.1k views
• 3 followers

Merblud

October 13, 20196 yr

Get this error when trying to install rtl8812au-dkms on a armbian ubuntu 18.04 desktop for rockpro64. Then when searching in aptitude for kernel-headers-4.4.166 then they are not available. It is also impossible to compile because of the missing kernels headers.

• 0

  Reputation Points

• 9 replies
• 6.2k views
• 1 follower

denni_isl

December 19, 20187 yr

I wanna use tinker board to work with logitech c930e camera. when i use cheese to open camera in tinker board. it's just show one black picture, and the camera light is on. before i had use the nanopi m4 to work with the logitech c930e. it's working good. and m4 create /dev/video0 , /dev/video1. but tinker board just create /dev/video0, so i think it maybe inside kernel have some option not open. but i don't know which need open. i'm not good at kernel. can give me some help? thanks a lot

• 0

  Reputation Points

• 1 reply
• 3k views

aitek

December 15, 20187 yr

Topic to discuss RK3288 overlays, primarily concerning ASUS Tinker Board, the MiQi is technically EOL and has very little GPIO anyway, and TV boxes are more or less sealed. Kernel 4.19 will be the pilot for this, the discussion now that it seems to be working thanks to @martinayotte and @zador.blood.stained's feedback and examples is what to overlay. For testing/debugging I started with some ASUS overlays for RTC and 1wire. Easy ones: spidev out of the default tree but as default overlays. instead of making 1 overlay and messing with parameters, just make 2 overlays DAC's: I don't have a lot of hardware to play with, but @…

• 1

  Reputation Points

• 35 replies
• 20.9k views
• 2 followers

mtr46

April 23, 20206 yr

I just recently bought a sim5320a GSM/GPS cape for my Tinkerboard S and it requires the use of ttyS3; however, by default Armbian uses this port for console... so I'm unable to use it w/ the cape. What do I need to do to disable the console on this port to free it up? EDIT: Nvm... after reading more, this isn't my issue (although I did find the answer above, which is to edit the /boot/armbianEnv.txt file). It's (the GSM cape) connected to the GPIO, and I need to enable the UART serial on here. Posted below is the product I'm using, and the last picture shows the GPIO PIN mappings that it uses. https://vietnamese.alibaba.com/product-detail/sim5320a-5-9v-2a-3g-gsm-g…

• 1

  Reputation Points

• 8 replies
• 5.2k views

deveric

December 14, 20187 yr

Hello, I am trying out the latest Armbian image on the Renegade board and after several hours i still do not the analog audio to work. Only the HDMI output is found and used. With the Ubuntu images provided by Firefly, the analog audio works fine, so we can exclude that it may be a problem with the hardware. I have seen in this forums such descriptions for other boards with the 3328 CPU, but from my understanding do that solutions not fit for the Renegade. May somebody provide me a hint, how to activate the analog output? Here you can find the Armbianmonitor output: http://ix.io/1vHd Here you can find inform…

• 0

  Reputation Points

• 10 replies
• 6.5k views

c0rnelius

December 18, 20187 yr

I put a TinkerBoard in a Pi-Top CEED and using TinkerOS 2.0.8 it boots and the LCD works fine. Using Armbian it looks like it boots but nothing is displayed on the LCD. The Pi-Top CEED uses a HDMI to 30-pin converter board and the current LCD is a 1920x1080 14in that I used to upgrade the original. Any ideas why the Raspberry running Raspbian and The Tinkerboard running TinkerOS would work with the display but Armbian wouldn’t?

• 0

  Reputation Points

• 27 replies
• 8.8k views
• 1 follower

mark-aus-51

April 19, 20197 yr

Hi everyone! Someone has implemented support for mcp2515 for tinker board in armbian? Thank you!

• 0

  Reputation Points

• 5 replies
• 4.4k views
• 1 follower

TonyMac32

December 5, 20187 yr

Hello everyone, I'm using the latest Armbian version on Tinker board. I notice that if I dont use for a few minute then my monitor will go blank and I need to press any keyboard or mouse click to make a monitor works again. Is there a way to turn off that functionality ? I would like to keep my monitor on all the time. Thank you

• 0

  Reputation Points

• 0 replies
• 3.9k views

Quan Do

November 20, 20187 yr

I purchased a ROC-RK3328-CC from LovRPi.com. The ONLY OS available I can get to boot is Armbian, so this is important. This is a new install. Everything seems to work well enough except DNS. The browser can't resolve domain names, though it can access the various routers' IP's.. cat resolv.conf shows the head text and nameserver 127.0.0.53 I've tried editing the network connection, adding DNS servers, which had no effect except that systemd-resolve --status shows the correct DNS servers for eth0 (the wired connection). This cannot be altered by systemd-resolve --set-dns=[DNS Server IP]. It doesn't throw an error but neit…

• 0

  Reputation Points

• 6 replies
• 23.4k views

Johnny

November 21, 20187 yr

Linux 4.4.163 has been released since the 10th of November, but the builds on the 13th and 15th are still only showing 4.4.162. I use your builds because they're awesome, they get me the latest patches. I hope 4.4.163 is included soon

• 1

  Reputation Points

• 1 reply
• 2.8k views

Igor

November 16, 20187 yr

I have the same issue on my Tinkerboard, here's the armbianmonitor -U output: https://paste.ubuntu.com/p/jggvYDMbCX/

• 0

  Reputation Points

• 10 replies
• 7.3k views

TonyMac32

November 15, 20187 yr

Hi, I am trying to make the RPI camera ( OV7750 ) to work with the TInkerboard in Armbian. But there is no module in /lib/modules for this camera. Is it already compiled in the kernel? Currently it doesn't work.

• 0

  Reputation Points

• 1 reply
• 3.4k views
• 1 follower

chwe

November 15, 20187 yr

I had use QML to made some soft, and when i move those soft to Tinkerboard, it's Incredibly slowly... have any idea to fix this? did tinkerboard had open gpu acceleration? do i must change back to use QtWidget?

• 0

  Reputation Points

• 0 replies
• 2.2k views

aitek

November 12, 20187 yr

Hi there, I have set up a tinkerboard S and I'm loving armbian so far. I only just encountered a weird problem. When i try to code in spyder3 there seems to be a messup in the keys i press and the key that is produced in spyder3. The funny thing is that this only occurs in spyder. When I type in terminal or gummi everything works fine. I am connecting to my TB using vnc using X. I've googled a bit around and found this could be a error of the XKEYBOARD as written here (I am however still not sure): https://github.com/spyder-ide/spyder/issues/3713 However I cant apply the proposed solution. I've found i need to go to /etc/X11/xorg.c…

• 0

  Reputation Points

• 0 replies
• 2.3k views

MEMEs

November 10, 20187 yr

hello. I have a problem for quite some time on my tinkerboard. I do not know if it's a software or hardware problem. It appeared after connecting a special Raspberry USB Hub http://www.uugear.com/product/7-port-usb-hub-for-raspberry-pi/ I used this HUB on a raspberry 3b but he grilled the wifi chip (disappeared totally). I thought I had to grill the wifi chip of the tinkerbard like the raspberry but I can see the chip turn on from time to time. Today she has reappeared but "wlan0 not ready" in the network manager. sudo ip link show wlan0 wlan0: <BROADCAST, MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000…

• 0

  Reputation Points

• 0 replies
• 2.5k views

dragonlost

November 9, 20187 yr

Hello and thanks for reading. I have done some digging before posting this so let me explain my issue and then what I have tried. I am using the Tinker Board S (via SD card, had same issue using EMMC img also) with the Bionic mainline kernel 4.14.y (in armbian config tool it shows Armbian 5.60 Stable ) on an LG 24LF452B montior/tv with the boards HDMI port and no adapters. I have been trying to set the display resolution to 1366X768 or as close to it (it does not appear in the display settings menu natively) but cant seem to make this work. The display works fine on other resolutions, except for horrible image because the wrong resolution, and can be used on 1366X768 …

• 0

  Reputation Points

• 0 replies
• 3.4k views
• 1 follower

Tinkerdan

November 3, 20187 yr

Hello, I'm observing a strange behavior. If I connect the Tinkerboard to HDMI, it won't start. Only the red led LED lights up. Yellow and green did not light up. The Tinkerboard ist connected to a NorthPada 5V 3A Micro USB Charger power supply. I measured the supply voltage with 5.3V and checked with an oscilloscope if there are voltage dips. But the voltage was stable. I did a cross test. I unplugged the HDMI cable and started the Tinkerboard. The Tinkerboard starts and the yellow and green LEDs lights up. I measured the supply voltage with 5.3V and checked with an oscilloscope if there a voltage dips. The voltage was stable and dropped to roughly 5.1V for a short ti…

• 1

  Reputation Points

• 16 replies
• 11.6k views

TonyMac32

December 6, 20187 yr

It seems that If I use the mainline kernel Ethernet does not work, in the sense that it doesn't even get initialized. ip addr will only show the loopback interface, and the kernel log will show this regarding the ethernet port. Could it be a device tree issue? [ 6.867997] rk_gmac-dwmac ff540000.ethernet: PTP uses main clock [ 6.868097] rk_gmac-dwmac ff540000.ethernet: Linked as a consumer to regulator.5 [ 6.868103] rk_gmac-dwmac ff540000.ethernet: clock input or output? (input). [ 6.868112] rk_gmac-dwmac ff540000.ethernet: TX delay(0x25). [ 6.868118] rk_gmac-dwmac ff540000.ethernet: RX delay(0x11). [ 6.868126] rk_gmac-dwmac ff540000.ethernet: integr…

• 0

  Reputation Points

• 13 replies
• 8.5k views
• 2 followers

jpegxguy

April 8, 20197 yr

Hello, I'm enabling g_ether driver on tinker board. The driver works and I'm able to emulate an Ethernet adapter on my PC when I connect it to the tinker micro USB port. This only works if the micro USB connection exists before powering ON the board. If I connect it while the device is already running nothing happens. This behavior may be related to the following kernel path: https://patchwork.kernel.org/patch/10535905/ Is there any parameter I can add to avoid the USB from going to hibernate state? Or would it be possible to add the mentioned patch to armbian build tool? Thanks!

• 0

  Reputation Points

• 5 replies
• 4.1k views
• 1 follower

Ravaz

December 17, 20187 yr

using latest Armbian: Linux indi 4.4.156-rockchip64 #21 SMP Wed Sep 19 13:14:57 CEST 2018 aarch64 aarch64 aarch64 GNU/Linux I can do the following (as sudo su), but, no voltage on the specified pin (pin 5, Linux pin 4): echo -n "4" > /sys/class/gpio/export echo -n "out" > /sys/class/gpio/gpio4/direction echo -n 1 > /sys/class/gpio/gpio4/value echo -n 0 > /sys/class/gpio/gpio4/value echo -n "4" > /sys/class/gpio/unexport I get no light on my generic LED with a 100k resistor - which lights when I move from pin 5 (Linux pin 4) MicroSD end of the board -> [ . . ] [ . . ] [ . . ] <…

• 0

  Reputation Points

• 6 replies
• 6.3k views

davembg

October 8, 20188 yr

hello i just installed Armbian_5.59_Tinkerboard_Ubuntu_bionic_next_4.14.67_desktop on a new tinkerboard s .. and ran myself into a corner immediately. i was trying to figure out how to get 4K 2160p resolution instead of HD 1080p. i changed the refresh rate from 60Hz to 30Hz and now can't get the display back. i tried reboot. and documentation at https://docs.armbian.com/User-Guide_Fine-Tuning/ said to modify /boot/boot.cmd and that file says "edit /boot/armbianEnv.txt to set supported parameters" .. . so i set disp.screen0_output_mode=1920x1080p60 in armbianEnv.txt no luck .. i seem to have gone headless earlier than planned .. advice pls? i w…

• 0

  Reputation Points

• 1 reply
• 3.2k views

jmandawg

October 2, 20188 yr

I've adapted a set of patches from Urja Rannikko, which move the HDMI frequencies definition into the DTS file, with some preconfigured rates if none are defined in the DTS. The original patches set is here : https://www.spinics.net/lists/arm-kernel/msg673156.html The big patch I used as a basis is here : https://github.com/urjaman/arch-c201/blob/master/linux-c201/0020-RK3288-HDMI-clock-hacks-combined.patch I included these patches by splitting them again : https://github.com/Miouyouyou/RockMyy/commit/57ff073fffb5678e75959e566704376f6f52ac17 These patches were suggested to me here : https://github.com/Miouyouyou/RockMyy/issues/3 …

• 0

  Reputation Points

• 3 replies
• 4.4k views
• 1 follower

jock

October 11, 20188 yr

Referring the MPP samples, i have got an application which can give me NV12 data. 4 instance(or threads) of this application will give me raw data, i need to scale all of them in a single screen. Is it achievable through Mali GPU with current development of userland/kernel driver? Also i need to perform composition. On that tiled screen, i need to show other semi-opaque(transparent) window. Which library can help me to do the same?

• 0

  Reputation Points

• 0 replies
• 2k views

naseeb

September 27, 20188 yr

I have 85 tinkers running with armbian 5.41 xenial next 4.14.23. Normally I run a script that apt upgrades them all but I run a small batch of them first as a test. Today I ran apt update/upgrade on three of them and they are all bricked. No output to the screen. Can't ping them. Any ideas?

• 1

  Reputation Points

• 70 replies
• 45.1k views

freak

September 3, 20197 yr

Quick question, what happened to Debian Stretch images for Renegade, it seems there is only ubuntu images for download now. Does armbian perfer ubuntu rootfs for server images now?

• 0

  Reputation Points

• 5 replies
• 4.8k views

sfx2000

September 22, 20188 yr

Hi folks... Looking at RK3288 on Armbian and the power/thermals - which are considerable considering SBC's like tinkerboard and miqi Currently - looks like all cores are following the same power/time domain - so one core goes fast, and the others follow, so sucks power and raises temps, and we get heat soaked quickly... Looking at the Rockchip docs, it does look like the RK3288 does have PD's for each core along with other logic... Six separate power domains for every core to support internal power switch and externally turn on/off based on different application scenario * PD_A17_0: 1st Cortex-A17 + Neon + FPU + L1 I/D Cache * PD_A…

• 0

  Reputation Points

• 0 replies
• 2.7k views

sfx2000

September 17, 20188 yr

I have Rockchip 3288 board. As per the link: http://opensource.rock-chips.com/wiki_Graphics I checked the log at /var/log/Xorg.0.log and found glamor initialization failed. There is also log which says EGL_MESA_drm_image required, i checked x-server code and found this message lead to glamor initialization failed. Apart from these when i run glxinfo, it shows It means direct rendering is enabled. But when i run glxgears it consumed almost 18% CPU( So i think glxgear is not able to use GPU and performing all tasks at CPU). What i am to do: I have created a application which can decode H264 vid…

• 0

  Reputation Points

• 10 replies
• 12.2k views
• 2 followers

jock

September 24, 20188 yr

Hi, i would like to know if there will be armbian stretch for rock64pro. I tried images on official website, but there are all with alot of buggs + they have everything messed up with user. I need that clean new image for emmc card. I would start from basic debian stretch image, but i couldnt make it work with etcher. p.s. sorry for my bad English, this is not my native language Best regards, Bekim

• 1

  Reputation Points

• 55 replies
• 36.3k views
• 5 followers

rocksa

February 25, 20197 yr

I am trying to get my Win TV Dual HD running at the Tinkerboard. But idk where the issue is Build my own Kernel ./compile.sh BOARD=tinkerboard BRANCH=dev KERNEL_ONLY=yes RELEASE=stretch ~# uname -a Linux tinkerboard 4.18.5-rockchip #3 SMP PREEMPT Sat Sep 1 12:50:32 CEST 2018 armv7l GNU/Linux ~# dmesg | grep em28xx [ 7.639731] em28xx 1-1.3:1.0: New device HCW dualHD @ 480 Mbps (2040:0265, interface 0, class 0) [ 7.639738] em28xx 1-1.3:1.0: DVB interface 0 found: isoc [ 7.702511] em28xx 1-1.3:1.0: chip ID is em2874 [ 8.835994] em28xx 1-1.3:1.0: write to i2c device at 0xa0 failed with unknown error (status=5) [ 8.836001] em28xx 1-1.3:1…

• 0

  Reputation Points

• 2 replies
• 3.9k views

Gunah

September 3, 20188 yr

Using 5.41 with Chromium 68.0... Using <input type="file"> on a web page... If you click a usb camera (probably usb stick as well) and the system mounts the usb (assuming it wasn't mounted already by other means)... after you close the dialog (whether you selected a file or clicked cancel)... chromium is frozen.

• 0

  Reputation Points

• 14 replies
• 4.2k views

freak

August 30, 20188 yr

Hi all. Is heatsink required for the libre 3328? When I log in to armbiam temp says 60 but it is in red text.

• 0

  Reputation Points

• 4 replies
• 4.5k views

Johnny

November 21, 20187 yr

Hello there. At present I power my Tinker Board S with a bench power supply set to 5.25V. The power supply has 10A current limiter. I measure the voltage at the GPIO pins using a 6.5 digit multimeter (in cal). The micro usb cord is 1.2 meters (4 feet). When the board is running in tinker os at idle, it is drawing 500mA, and i read 5.00V on the GPIO. But when I load the CPU using sysbench the current spikes to 1.6A, and the voltage measured on the GPIO drops to 4.45V. I measured that the micro USB cable is 0.37Ohm resistance, so about 0.55V of that power drop is due to the micro usb cable. That means all of the voltage drop is not due to the power c…

• 1

  Reputation Points

• 22 replies
• 14k views

LawlessPPC

August 25, 20188 yr

Hi , I have an ASUS Tinker board S and I installed Armbian 5.54 on SD card. Then, I want work on eMMC drive of ASUS Tinker board S but, Armbian no detect it. How can I work with eMMC drive in Armbian ? Here my board info: http://ix.io/1j2Z Thanks, see you.

• 1

  Reputation Points

• 20 replies
• 14.5k views
• 1 follower

xxavi

August 4, 20188 yr

Dear Colleagues! In the I2S RK3288 interface rather limited number of timeslots of TDM (PCM). I try to use RK3288 spi as the subordinate controller for input and processing of a data stream of TDM (128 timeslots). Was - whether you have a practice of creation of spi of the driver for operation in slave DMA?. Perhaps for other chip. I will be glad to responses! Thanks!

• 0

  Reputation Points

• 0 replies
• 2.4k views
• 1 follower

sultan

July 27, 20188 yr

As https://www.armbian.com/tinkerboard/ has a quite fresh 4.14 Linux kernel (in Armbian Stretch Next Desktop 5.50) I am trying to use that instead of the standard TinkerOS 2.0.7 with a 4.4.103 kernel. However, Armbian is configured to provide only spidev2.0, while TinkerOS can have spidev0.0, spidev0.1, spidev2.0 and spidev2.1 all enabled at the same time as long as you disable UART4 which shares GPIO header pins with SPI0. In the TinkerOS case, there is a config tool which edits a small and straightforward text file in /boot/ containing lines such as "intf:spi0=on" or "intf:uart4=off". The corresponding Armbian file seems to be /boot/armbianEnv.txt - possibly…

• 0

  Reputation Points

• 8 replies
• 5.5k views
• 1 follower

TonyMac32

July 28, 20188 yr

today I flashed armbian in my Asus TB and WiFi was working but only for first boot now I am facing this problem ifconfig wlan0 up operation not permitted

• 0

  Reputation Points

• 2 replies
• 2.8k views
• 1 follower

TonyMac32

July 23, 20188 yr

Hi, I created a Tinkerboard OMV 4 image some while ago, we uploaded it untested (since 'OMV' just means Armbian's build system doing its job with a massive post processing script adding tons of stuff) but now got the report it doesn't boot. That's a bit surprising given that the image has been downloaded over a hundred times and no one complained so far. Deleting the image is the logical consequence but maybe someone here with a serial console can give it a try and report whether the board comes up or where it gets stuck at booting. http://kaiser-edv.de/tmp/jk4NM5/OMV_4_Tinkerboard.img.xz (with mainline kernel) or the default kernel variant from he…

• 0

  Reputation Points

• 3 replies
• 4.1k views

Tido

July 16, 20188 yr

Hi all, I got a libre rk3327 board, and i'm tyring to test my crypto and i'm not getting anywhere near the results you guys are getting here Is there something special i need to do to enable the hardware crypto? Linux renegade 4.4.138-rk3328 #3 SMP Sun Jul 1 20:15:37 UTC 2018 aarch64 GNU/Linux OpenSSL 1.1.0f 25 May 2017 built on: reproducible build, date unspecified options:bn(64,64) rc4(char) des(int) aes(partial) blowfish(ptr) compiler: gcc -DDSO_DLFCN -DHAVE_DLFCN_H -DNDEBUG -DOPENSSL_THREADS -DOPENSSL_NO_STATIC_ENGINE -DOPENSSL_PIC -DOPENSSL_BN_ASM_MONT -DSHA1_ASM -DSHA256_ASM -DSHA512_ASM -DVPAES_ASM -DECP_NISTZ256_ASM -DPOLY1305…

• 0

  Reputation Points

• 3 replies
• 5k views

tkaiser

July 15, 20188 yr

Hello, I have 2 questions. 1. How long does the support for the tinkerboard takes. Because I'm using the Board as Server and i don't need much CPU Power but I don't like to buy every 2-4 years a new board because the support ended. The reason of this question is, the odroid c1, there is no stretch image for this board. 2. Is there a good howto, how to build a kernel on a thinkerboard with own config? Reason for this question is, I have installed the latest armbian stretch server image on my tinker board and the kernel has no ebtables support. Second Reason ist question 1, build a own Kernel and update to Debian 10,11, ...., n.

• 0

  Reputation Points

• 8 replies
• 5.7k views

Tinker_Newbi

July 15, 20188 yr

As discussed on multiple threads, the aim of this thread is to bring all RockChip devices under one BSP (4.4) Kernel. This discussion can be found (partly): and a bit background here: https://github.com/rockchip-linux/kernel/issues/98 Cause I'm not willing to cut out all this stuff from the related threads (this would end in a complete disaster) I try to summarize it here (if something is missing, let me know I'll add it): RockChips BSP kernel is not longer an option. Cause it breaks faster that our current resources allow to fix it. Having all SoCs under one kernelsource would make it more predictable and decrease the efforts needed to keep…

• 1

  Reputation Points

• 23 replies
• 14k views
• 1 follower

sfx2000

September 22, 20188 yr

Hello, I am using the armbian kernel+uboot patchset of the rockchip-next (4.14.x) part to support Tinkerboard+TinkerboardS in an own home automation environment. U-Boot 2018.05 and kernel 4.14.53 are working fine so far with the current patchset published on GitHub (thanks for this great work!). However, the only issue I am still having is, that the ethernet port always comes up with "no-link" on the intial powerup of the Tinkerboard. As soon as I software reboot it after the initial powerup the ethernet port perfectly comes up with a link and I am able to setup all IP data, etc. But as soon as I completely power down the system and replug the power-cable it a…

• 0

  Reputation Points

• 2 replies
• 3.1k views

jmaus

July 7, 20188 yr

Hello, I am the author of a home automation platform (RaspberryMatic) which is targeted for embedded platforms like RaspberryPi or Tinkerboard. I am regularly following Armbian kernel and u-boot updates for the Tinkerboard and integrate them into my buildroot-based environment so that recent kernel and u-boot versions can be used. I have already updated my environment to kernel 4.14.x and U-boot 2018.05 using the great armbian patchset from GitHub (Thanks for the hard work to get all the Tinkerboard S related issues sorted out recently). What I am currently trying to achieve is to get the Tinkerboard to use a different set of standard gpio settings…

• 0

  Reputation Points

• 5 replies
• 12.1k views
• 1 follower

chwe

July 6, 20188 yr

Just got my Tinker Board S in... used Etcher to flash the following image to the eMMC: Armbian Stretch mainline kernel 4.14.y It won't boot. That same image flashed to the SD card boots just fine. I've tried using the armbian-config to install it to the eMMC that way; however, all I get are "There are no targets. Please check your drives." What the heck am I doin' wrong? New to the entire SBC realm, and got this instead of the Pi. I don't want a desktop distro installed... just a simple distro w/ bash. Any help would be appreciated... spent the last 6 hours trying to figure this out. This isn't the 'tinkering' I had in mind when I got this thing.…

• 0

  Reputation Points

• 8 replies
• 5.8k views

TonyMac32

June 29, 20188 yr

I cannot get any CMA reserved space when I use latest LTS kernel (4.14): dmesg always says that no memory has been reserved for CMA. Is CMA working on mainline kernel for Mali Midgard? Is it required for 3D/video decoding stuff or the Mali kernel driver should instead allocate memory on-demand? I see that most of the kernel configuration options regarding CMA are disable or not set, which one requires to be enabled?

• 1

  Reputation Points

• 3 replies
• 3.3k views
• 1 follower

Myy

June 28, 20188 yr

Hello! I set up a firewall on the Asus Tinkerboard. I came across a very strange thing - the lack of support for the CT target in iptables. In fact, it appears that iptables has support of given target, but the required kernel module is missing. After running cat /boot/config-4.4.120-rockchip | grep NETFILTER_XT_TARGET_ST I saw the following: # CONFIG_NETFILTER_XT_TARGET_CT is not set. What the reason of that decision? It blocks ability to forward sip, ftp and some other protocols precisely. And also blocks ability to use SYNPROXY target correctly. Is it planned to include this module in the build?

• 1

  Reputation Points

• 4 replies
• 3.8k views

Igor

August 16, 20188 yr

Same with your ROC-RK3399-PC (Renegade Elite): https://libre.computer/products/boards/roc-rk3399-pc/ How do you plan to solve heat dissipation there? And do I get it right that the USB-C in the upper left corner is meant as a generic 12V input?

• 1

  Reputation Points

• 326 replies
• 144.8k views
• 11 followers

denni_isl

June 3, 20215 yr

My application creates 15 threads. Since A53 has 4 cores it is likely that more threads will be spawned by A53. Is there a way to manipulate scheduling and create more threads through cortex A72 so that it compensates the delay. Examples 6 threads on A72 and 9 threads on A53. This way it ensures the run time does not fluctuate and we achieve peak performance.

• 0

  Reputation Points

• 6 replies
• 4.7k views
• 2 followers

jock

June 28, 20188 yr

Today my effort is getting the rk3288 tv box boot from USB devices. During the initialization of the OTG USB port, u-boot complaints about dwc_otg_core_host_init() function which is timing out. I tried to manipulate the device tree chaning the dr_mode flag to host, otg and peripheral, but nothing changed. The only way to get rid of the timeout is to disable the device which, by the way, seems to not work anyway. U-Boot 2017.09 (Jun 17 2018 - 18:55:17 +0200) Model: XT-Q8L-V10-RK3288 DRAM: 2 GiB MMC: dwmmc@ff0c0000: 1, dwmmc@ff0f0000: 0 ** First descriptor is NOT a primary desc on 0:1 ** In: serial Out: serial Err: serial Model: XT-Q8L-V10-RK3288 …

• 0

  Reputation Points

• 2 replies
• 4.1k views
• 1 follower

jock

June 18, 20188 yr

Looking for a bit of advice... Been running Armbian CLI on the tinker (nonS) via SD card no problems Got an S with eMMC... Wrote tinkerOS and it loads no problems... Wrote Armbian image.... No go / boot Any suggestions on how to fix.... Thanks... There is a bit here which is what it used to re-write TinkerOS to the eMMC https://tinkerboarding.co.uk/wiki/index.php?title=Setup Really like the Armbian CLI versions as lightweight and without bloat.

• 0

  Reputation Points

• 3 replies
• 5.8k views
• 1 follower

Robertspark

June 9, 20188 yr

Hello, after a short break, wants to continue with the Tinkerboard. :) I use Armbian-Stretch with the kernel-4.4.126. I want to connect an IR receiver to a GPIO port and use it with the lircd tool. What possibilities does Armbian-Stretch offer me here? Thank you very much. Clash

• 1

  Reputation Points

• 7 replies
• 9.6k views
• 2 followers

jock

June 13, 20188 yr

Anyone who typically updates on nightly kernels I would recommend freezing and not updating until we clear up some issues gifted us by some large amount of upstream changes that broke well, pretty much everything. I will update this thread as things get brought back to life. June 7th 2018: I've made a branch (rockchip-default) to work out the kinks. So far I have the board booting and Mali working again (with an initial error on load) , however there is no HDMI terminal, so initial boots would require a uart or SSH hdmi terminal is back thank you to Ntemis on github, I'd missed part of the conversation (I only have cell phone while at w…

• 1

  Reputation Points

• 16 replies
• 16.1k views
• 2 followers

TonyMac32

July 20, 20197 yr

Hi guys, sorry, on with my second issue with the Asus Tinker Board and installing a DS3231 Real Time Clock module. I've tried following any instructions on the internet for Tinker Board use and a couple for the Raspberry Pi, from recompiling the kernel through to trying to edit boot files. I just cannot get this thing working so I've now got myself a fresh install of Armbian Stretch 4.14 and ready to go again. Can anybody provide a step-by-step installation for the Tinker Board and this module (I've been told the DS1307 is the same kernel module but for the life of me I cannot find any modules/.ko's available in Armbian)? Ma…

• 0

  Reputation Points

• 10 replies
• 15.4k views
• 1 follower

guidol

June 11, 20188 yr

Using 5.41 I ran armbian-config to install armbian on a tinker board s emmc. Install went ok but get nothing but a black screen on boot. Any ideas on what to do to get it going?

• 0

  Reputation Points

• 22 replies
• 9.2k views
• 1 follower

TonyMac32

June 1, 20188 yr

Hi all, I've got an application that runs from the terminal and with it failing to work on Tinker OS I've gone back to my default OS, Armbian, where it works faultless. However, everything worked great on my own 25" Philips monitor.... The Tinker Boards will be plugged into a number of 1440 x 900 60hz Samsung and LG HDMI monitors; the only screens available where I am. When using these screens I get a 2-3 pixel vertical purple line down the left of the screen and horrific 1 pixel high, long horizontal multi-coloured lines 'snowing' down the screen like old TV interference. The LG monitors consistently flicker on and off trying to change resolution.…

• 0

  Reputation Points

• 24 replies
• 11.2k views
• 1 follower

TonyMac32

June 19, 20188 yr

Is it possible to patch the device tree someway to enable HDMI output and having the console on the framebuffer for debugging in current non-development armbian version? Thanks

• 0

  Reputation Points

• 5 replies
• 9.3k views
• 1 follower

jock

June 24, 20188 yr

Hello, Thank you ahead of time!! I realize there is not an armbian disro for the roc 3328 renegade. It does seem that you all can help with my issue though. I recently patched and compiled a kernel to run real time with the rt preempt. The issue I'm running into is this thing doesn't use grub , so I can't choose the kernel at boot up like a x86 and it doesn't have a config file like a rspi. Is there a way around this ? I'm way out of my comfort zone here. According to what I have read, I need to copy the vmlinuzrt18 to the area where the present kernel is being called now. I admitting find the whole u boot thing confusing. Can anyone help me out? Th…

• 0

  Reputation Points

• 23 replies
• 10k views
• 1 follower

TonyMac32

June 1, 20188 yr

Hi, Got a Tinker Board and tried the 5.41 Xenial mainline 4.14.23 desktop -> https://www.armbian.com/tinkerboard/#kernels-archive Need to enable the I2S on 40pinheader connector for both playback & capture (192KHz/32bits) but I dont seem to find the info for this. Any help is valuable!

• 0

  Reputation Points

• 0 replies
• 2.5k views

Christos

May 21, 20188 yr

THE MEDIA SCRIPT IS DEPRECATED, IN FAVOR OF THE OFFICIAL LEGACY MULTIMEDIA FRAMEWORK. PLEASE REFER TO THIS TOPIC: The UN-official, UN-supported, UN-necessary, UN-popular, UN-precedented... RK3288 MEDIA TESTING SCRIPT [2.0: Bionic update] So here is the final release of the RK3288 media testing script. Basically, the script provides the following functionality: Installing all the libraries and system configurations necessary for GPU accelerated X desktop, Chromium WebGL, full VPU video play acceleration up to 4k@30 HEVC (the maximum supported by the SoC), and GLES 3.1 / OpenCL 1.2 support. Three video players suppor…

• 1

  Reputation Points

• 152 replies
• 135.9k views
• 9 followers

JMCC

December 17, 20205 yr

apt-get update / apt-get upgrad Armbian Xenial desktop mainline kernel 4.14, system failed to reboot and need a power reset to bring up. # uname -a Linux tinkerboard 4.14.34-rockchip #20 SMP PREEMPT Sun Apr 15 20:07:28 CEST 2018 armv7l armv7l armv7l GNU/Linux

• 0

  Reputation Points

• 0 replies
• 2.2k views
• 1 follower

Samson

May 17, 20188 yr

So those of us working on getting Retro Pie working on the Tinkerboard have run into a road block. Perhaps someone here might have a clue on this? Current using these instructions to build Retro Pie using the legacy Armbian Debian (4.4) https://github.com/Tinkerpie/Armbian-Setup And for audio over HDMI you need to currently make a change in /usr/share/alsa/alsa.conf setting defaults.pcm.card to 1 When this script linked down below: https://github.com/Rydra/bgm-for-es The BGM script takes over all audio so for instance the audio in games does not work or any other audio such as audio from the video sna…

• 0

  Reputation Points

• 0 replies
• 3.5k views
• 1 follower

AngryManMLS

May 17, 20188 yr

Please post complaints, as of my latest build I'm getting the link drops as well.

• 1

  Reputation Points

• 4 replies
• 4.8k views

TonyMac32

May 15, 20188 yr

Hi, I've got several tinkerboards that I've reproduced this problem on. I'm using the tinkerboard to do network tests, this includes iperf3 traffic,dns querys (dig), https and http (echoping), and ping. All of these tests runs against IPv6 targets and IPv4 targets. These tests are scheduled to very frequently (every other minute or so). To begin with, all tests run fine.. I get good results (~1gbit throughput / low latency / no packet loss). However, after running the tests for 15-20min, suddenly all traffic will more or less stop working (80-90% packet loss). This is no matter what I'm pinging, can be the local router, some target on the…

• 0

  Reputation Points

• 7 replies
• 7k views
• 1 follower

berre

May 13, 20188 yr

I am trying to get a USB Serial adapter working on my Asus Tinkerboard running Armbian. if i lsusb i get: root@tinkerboard:~# lsusb Bus 001 Device 006: ID 067b:2303 Prolific Technology, Inc. PL2303 Serial Port however no /dev/ttyUSB0 shows up. Is there an armbian kernel for the asus tinkerboard with usb serial support?

• 1

  Reputation Points

• 11 replies
• 12.2k views
• 1 follower

odoll

February 13, 20197 yr

On the Tinker Board , I have tested a simple GPIO application using preinstalled wiringPi C library. I also ran the same application on Raspberry Pi using preinstalled wiringPi C library, but I noticed that the Tinkerboard GPIO speed is very slow. I wonder why this is the case. I would appreciate, if someone share opinion about it. I've added the C program and attached oscilloscope screen-display for GPIO port speed for both Tinker Board and Raspberry Pi. I tested Tinker Board with 2018-02-22-tinker-board-linaro-stretch-alip-v2.0.5 image. GPIO speed is about 158 Khz I tested Raspberry PI 3 Model B with 2018-03-13-raspbian-stretch image. GPIO speed is about 1.9…

• 1

  Reputation Points

• 10 replies
• 6.9k views
• 1 follower

chwe

April 23, 20188 yr

I connected a tinker to a 4k tv and the highest resolution that armbian offers is 1920x1080. What could be the reason that 4k res is not offered? I'm using ARMBIAN 5.43.180417 nightly Ubuntu 16.04.4 LTS 4.14.34-rockchip.

• 1

  Reputation Points

• 9 replies
• 4.7k views

freak

April 19, 20188 yr

Hi there Board, I have bought my Tinkerboard after some good research with my fellow techies at Red Hat and reading thoroughly that 19+pages Tinkerboard Thread. After crafting a super lean/mean kernel (kconfig at https://gist.github.com/rfrht/5f0fa113f12fbacf832e57ff4967785a ), I got a stable and lightweight kernel configuration. Things got a lot funnier when doing some compatibility tests with specific Asterisk versions, I was able to install and run cleanly a Raspi .DEB pkg. And that got me thinking. I have now JUST replaced the Raspberry Pi with the Tinkerboard. And guess what: It was a _inplace_ upgrade! Using the same u…

• 0

  Reputation Points

• 0 replies
• 3.1k views
• 1 follower

Rfreire

April 14, 20188 yr

Anyone here playing with USB network adapters? I have a (noname) USB3 Gigabit ethernet adapter which seems capped at 250 Mbps. I know the Tinkerboard only has USB 2.0 (so a theoretical maximum of 480 Mbps), just trying to see if there are better parts out there I could try.

• 0

  Reputation Points

• 5 replies
• 6.2k views
• 1 follower

root

April 14, 20188 yr

Hi there! o/ I have noticed something... Odd. This is not a show stopper here, but the TinkerBoard NIC leds stays off all the time (if no traffic) even with link. It does blink somewhat schizophrenically when there's traffic. The right NIC led is bi-color and sometimes blinks in yellow, sometimes blinks in green. For what is worth, running Kernel 4.4-120. Issue also happened in build -104, which was the original Armbian image that I have downloaded. I thought it was something with the port, cables but... Traffic flows just normally Is it... normal? :-) Have a great (tinkering) weekend!!!

• 0

  Reputation Points

• 2 replies
• 2.5k views
• 1 follower

Rfreire

April 15, 20188 yr

i have upgraded armbian on tinkerboard asus form 5.35 to 5.38. And this changed cpu governor to conservative. I have changed it to performance. BUT previous max cpu speed was 1.80GHZ and now i have only 1.61.GHZ I have cooler with fan on my tinkerboard and iam not scared high cpu temperature. Hov to get back to the maximum 1.80 GHZ frequency ???? I cant add 180000MHZ via sudo nano /sys/devices/system/cpu/cpu0/cpufreq/scaling_available_frequencies to each core permission denied. please help

• 1

  Reputation Points

• 22 replies
• 15.6k views

constantius

April 15, 20188 yr

Hello, I want to extend the current kernel (Tinkerboard with rockchip-kernel-4.4.120 on Debian-Armbian) to include IR (GPIO) and DVB modules. What do I have to consider or is this possible with the usual run-through? (copy .config from current system, make menuconfig, make, sudo make install, sudo make modules_install) Is there possibly already a tutorial that I have not seen? Clash

• 0

  Reputation Points

• 8 replies
• 10.2k views
• 2 followers

Igor

April 14, 20188 yr

I played a bit with the SenseHAT from the RPi guys. Doesn't work fully but I get the first things working. What does run: Joystick 8x8 led matrix (partly, seems that there are some parts of the framebuffer not fully working) What doesn't run: all the sensors attached on the board What's missing: load it devicetree overlay (at the moment it's coded into the main dts) how-to what's needed to get it working on your tinker too I'll keep you updated.

• 1

  Reputation Points

• 1 reply
• 4.2k views

Larry Bank

April 9, 20188 yr

I try to get working a tinkerboard on a battery. I can do that with S.USV or S.USV Mobile but i don't know the difference between them. I have a xl4015 (5Amp buck convecter) but I don't really understand how it's work (i have a lm2596 too). I have a 20AWG micro-usb too but i can power it too from gpio. So i search a quick way to get it work on a battery. I work and search on this since 5 week and i really need to get it work. Thx

• 1

  Reputation Points

• 15 replies
• 10.6k views
• 2 followers

Sangram

April 12, 20188 yr

Hello all. I'm doing some tests with the Tinker Board to see what's the best operating system for it for a new video. I'm using the Armbian Ubuntu Desktop legacy kernel. For this I do Blender and Kdenlive renders to see if there's a speed difference. But with both I've got the problem that it crashes the Tinker Board. Sometimes it's a hard crash and the whole system freezes, and sometimes Blender or Kdenlive just close themselfs but Armbian keeps working. I do not have this problem in Lubuntu. In TinekrOS Kdenlive totally doesn't work. It looks the same as an unstable overclock on a system. I've tried different psu's. I'm using the Tinker h…

• 1

  Reputation Points

• 53 replies
• 23.4k views
• 3 followers

yurmomzafag

February 1, 20197 yr

Hy, I have a Tinkerboard with armbian ( debian jessie). When I put behind my fiber router, and i do a speed test i have : With iperf3 ==> download : 980M and upload : 240M with speedtest-cli ==> More or less Results. I wanted to conenct my Asus's card behind the ONT(Optical Termination Boxes) i can connect with pppoe or dhcp. And in pppoe or dhcp my speed test show this : With iperf3 ==> download : 110M and upload : 80M with speedtest-cli ==> More or less Results. I have tested with anorther Board, bananapi mé with Bananian and i have the same Results if I put behin…

• 1

  Reputation Points

• 11 replies
• 7.6k views

Ren Ping

February 20, 20197 yr

Hello, I want to install libdrm from here https://github.com/rockchip-linux/libdrm-rockchip But there are already problems with autogen.sh. See below. Does anyone have a tip for armbian (Debian stretch) on how to install this library? The Clash Spoiler $ ./autogen.sh autoreconf: Entering directory `.' autoreconf: configure.ac: not using Gettext autoreconf: running: aclocal --force -I m4 ${ACLOCAL_FLAGS} autoreconf: configure.ac: tracing autoreconf: configure.ac: creating directory build-aux autoreconf: running: libtoolize --copy --force libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR,…

• 1

  Reputation Points

• 6 replies
• 7.1k views

Clash

April 9, 20188 yr

For some reason the default UART utilized by uboot is uart2 on the Tinker. I haven't messed with it, and left it alone, but vendor uses UART1, and UART2 has a conflict with PWM pins. I'm in favor of changing, if anyone objects or has a more interesting idea, please discuss.

• 1

  Reputation Points

• 20 replies
• 10.4k views
• 1 follower

jkljkl1197

April 23, 20188 yr

Hi, i get a probleme with the actual uart acces config by default on Uart2 (pin 32, 33), because i need to use PWM pin (use to set motor speed with a L293D) and on the board only pin 32, 33 can be use with PWM. Now i am using 32 33 pin as PWM but if the cable on these pin is connected the board doesn't boot, maybe because the uarts of u-boot use these pin and the result of un connected cable to my setup = Critical fail. When i remove the cable on pin 32 the board boot. So i need to solve that because i don't want to disconnect this cable at each start and i want to use uarts with this setup. I need to change uart2 to uart1 or find a way to get PWM or a other pin option …

• 1

  Reputation Points

• 1 reply
• 2.6k views

TonyMac32

March 30, 20188 yr

Hi all, Saw that via Slashdot. A RPI 3 b+ benchmark comparing against other SBCs and TinkerBoard. Check it out: https://www.phoronix.com/scan.php?page=article&item=raspberrypi-3-bplus Feeling great for buying one, after reading all 18 pages of the forum! Ah. A big shout THANK YOU to Igor, Tony, Kaiser and everyone else that helped build a working Armbian release to this SBC. -RF

• 1

  Reputation Points

• 6 replies
• 3.8k views
• 2 followers

Rfreire

April 1, 20188 yr

Is there a way to upgrade from an earlier version to 5.41?

• 1

  Reputation Points

• 8 replies
• 4.8k views

Jose Deras

March 28, 20188 yr

tinymembench v0.4.9 (simple benchmark for memory throughput and latency) ========================================================================== == Memory bandwidth tests == == == == Note 1: 1MB = 1000000 bytes == == Note 2: Results for 'copy' tests show how many bytes can be == == copied per second (adding together read and writen == == bytes would have provided twice higher numbers) == == Note 3: 2-pass copy means that we are using a small temporary buffer == == …

• 0

  Reputation Points

• 5 replies
• 7.1k views

pfeerick

March 19, 20188 yr

Hello. Has anyone had success with setting up the onboard wifi on the Tinkerboard without the network manager? I have tried using wpa_supplicant to connect but not having any success. Here is what (I know works on an Intel Compute Stick running Ubuntu 16.04) I've tried: wpa_passphrase SSID password >> /etc/wpa_supplicant.conf wpa_supplicant -i wlan0 -c/etc/wpa_supplicant.conf -D nl80211 -B dhclient wlan0 dhclient just keeps retrying and goes no where, I don't get an IP address I can connect to my network using the Network Manager no problems, just can't figure out a way to get it to work with the network manager disable…

• 1

  Reputation Points

• 9 replies
• 19.2k views

freak

March 21, 20188 yr

Video demonstrating issues reconnecting to Wi-Fi please help

• 0

  Reputation Points

• 7 replies
• 3.7k views

Igor

March 13, 20188 yr

linux-xenial-root-next-tinkerboard 5.38 with 4.14.14 kernel installed. armbian's apt repository has only 5.38. but packaged rom file from dl.armbian.com is 5.41 with 4.14.23. (Armbian_5.41_Tinkerboard_Ubuntu_xenial_next_4.14.23_desktop.7z) How to upgrade on linux latest armbian? It need waiting?

• 0

  Reputation Points

• 4 replies
• 5.1k views

Thewonderer

April 1, 20188 yr

hi , i am using the gpio library provided by asus tinker board to work with gpio on armbian os . i am having issue with running the python script without giving sudo cmd. is there any alternative to overcome giving sudo all the time while running gpio python script or any other alternate library to use with armbian python add_event_callback.py can't open /dev/mem and /dev/gpiomem wiringPiSetup: Unable to open /dev/mem and /dev/gpiomem: No such file or directory Segmentation fault

• 0

  Reputation Points

• 4 replies
• 4.8k views

Yuvaram Singh

March 8, 20188 yr

Since Armbian moved to the official Rockchip kernel, camera support should work with their new ISP1 driver. I built an image with the needed drivers but unfortunately it doesn't boot anymore... A boot log with the compiled drivers can be seen here (kernel config is attached to this post): Spoiler U-Boot SPL 2017.09-armbian (Mar 03 2018 - 23:43:36) Returning to boot ROM... U-Boot 2017.09-armbian (Mar 03 2018 - 23:43:36 +0100) Model: Tinker-RK3288 DRAM: 2 GiB MMC: dwmmc@ff0c0000: 1 *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Model: Tinker-RK3288 Net: eth0: ethernet@ff290000 Hit any key to stop a…

• 1

  Reputation Points

• 22 replies
• 10.3k views
• 2 followers

Myy

June 5, 20188 yr