Software, Applications, Userspace

Hi, I am using Friendlyelec armhf OS version with these details - No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 16.04.5 LTS Release: 16.04 Codename: xenial I have added few files in this system and trying to create an image of the same OS. Following are the details - udev 390M 0 390M 0% /dev tmpfs 98M 6.0M 92M 7% /run overlay 3.2G 3.0G 37M 99% / tmpfs 492M 0 492M 0% /dev/shm tmpfs 5.0M 4.0K 5.0M 1% /run/lock tmpfs 492M 0 492M 0% /sys/fs/cgroup tmpfs 99M 4.0K 99M 1% /run/user/1000 /dev/mmcblk0p1 60M 13M 43M 23% /media/pi/boot1 tmpfs 99M 0 99M 0% /run/user/0 I am trying to create the …

Hello, I bought a card which has an SK6805 LED onboard (https://www.tindie.com/products/hallard/ethtinfo-tic-teleinfo-reader-for-ethernet-esp32/) and I'm wondering if there is a way to control it from my BananaPI IO-8 ? Thanks

This article describes how I successfully configured a PWM fan on an Orange Pi 5 Max running Armbian Debian Trixie Minimal vendor 6.1.115, using the opifancontrol utility. Special thanks to Jamie Sinclair for creating and sharing the opifancontrol project with the community. I have an Orange Pi 5 Max installed in a metal case and running several Docker containers, including Frigate, Immich, Samba, and others. The case originally came with a internal 30x30x10 mm fan, which was not able to provide sufficient cooling. Under load, CPU temperatures were reaching nearly 70°C. To improve cooling, I installed an external 40x40x10 mm PWM fan that was o…

Im using armbian server edition. Im trying to setup my box to route internet from end0 (192.168.1.6) to internet on usb0 (dhcp). Im running dns & dhcp via docker adguard - but assume thats not working for now because once the nftable rules are applied I cannot access their web interfaces. But for now ping with ip is okay. With my current setup I can ping the internet from the 'router' via the interface usb0. But I cannot ping from the interface end0. ping 8.8.8.8 -I usb0 <- works ping 8.8.8.8 -I end0 <- Destination Host Unreachable Do I need to setup any static routes? Or should nftables handle all the routing? Ive t…

Is it possible to run armbian with pre-installed homeassistant on a raspberrypi 3B+ ? The reason of my question is, I have running homeassistant on a orangepi pc2 which work very well. On the raspberrypi 3B+ running unter raspbian, homeassistant is very slow.

Does anybody have piclone available? I have tried many repos but it won't compile. I was able to install rpi-imager but I need piclone. Thanks!

I did install an apt install nfs-kernel-server nfs-common on my bananaPi M1. I did export some dirs and successfully mounted them from my clients. After a reboot the mounts did not work. Then I manually invoked exportfs -a and the client were able to mount. What is the correct way to get the nfs server started after a reboot?

Is there a feature or workaround to automate armbian setup at first boot (set root password, set locales, set timezone, etc) ?

I have an OrangePi PC with armbian installed on it. Today, probably because of my stupidity, the board couldn't boot after upgrading a bunch of stuff. When I opened the sd card on my pc, I found that there were no kernel files in /boot and there were broken symlinks. I tried to replace these with the files from the current minimal image armbian is available for the board, but encountered a UUID mismatch. I then used files from a september 2021 backup, which did allow me to boot into a functional system. It had Linux 5.10.43-sunxi. But before my attempts to fix the issue, my system had Linux 6.1.11-sunxi installed, so I am concerned about this mismatch and would like to sa…

Hello there! I'm trying to build .iso image for orangepi5-plus, I've tried various options and other boards (including one board from Platinum support section), but always getting the same error stands for: Applying 153 patches from 135 files of which 1 driver patches, 134 patches in regular, sorted files... -> 001/153: /mnt/c/Users/mevep/armbian-build/cache/patch/kernel-drivers/sha1_86731a2a651e58953fc949573895f2fa6d456841_rockchip64_edge_bddabb7e_6fc916f5-01ba4719(:1) Patch ->/mnt/c/Users/mevep/armbian-build/cache/patch/kernel-drivers/sha1_86731a2a651e58953fc949573895f2fa6d456841_rockchip64_edge_bddabb7e_6fc916f5-01ba4719(:1) <- needs fixin…

Hi, i updated my Odroid HC2 to OMV7 following posts 29 and 30 from this thread https://forum.openmediavault.org/index.php?thread/51654-seemingly-cannot-update-and-upgrade-anymore-due-to-repository-having-no-release/&postID=383747#post383747 Actually looks like the update completed successfully, but i noted that connecting in ssh my motd looks wrong. Attaching it. I do not understand why it picks the VERSION_CODENAME "Buster" while i'm instead on "bookworm". Following scripts in /etc/update-motd.d : steakhutzeee@dk:/etc/update-motd.d$ grep VERSION_CODENAME /etc/os-release | cut -d"=" -f2 bookworm steakhutzeee…

Hi! I'm new in the forum, so I don't know if this is a bug or just a feature request. The idea is `armbian-upgrade` also runs dkms install, you know, like Ubuntu, so the zfs kernel module will be automatically building together with the kernel upgrade. Please, let me hear your thoughts about this. Maybe there is a flag to enable this already, or an open bug to implement the feature.

Hello, I have a Medion Chromebook S2015 with a CPU (armv7 processor rev 1 (v7l)) and RAM (2062808 kB). So it's 32-bit. I want to install Linux on it. To do this, I need an armhf architecture. However, under armhf on ARMBIAN, I find (Inovato Quadra, Khadas Edge 2, Khadas VIM4, Mekotronics R58 4X4, Mekotronics R58 HD, Muse Pi Pro, NanoPC T6 LTS, NanoPi M5, Nanopi M6, Nanopi R3S / LTS, NanoPi R76S, Radxa Rock 5B Plus, Radxa Rock 5C and Radxa Rock 5T). What should I select? Are there still 32-bit versions available?

I would like to create Lab with PiRogue and add suricata custom rules for Pegasus attack preventions: https://pts-project.org/guides/g7/ I would like to use internal PiRogue_VPN_server and add additional 3x-ui or S-ui server with xray-vless-realty as second layer because mobile operators or internet providers from specific country like RU or CN may block simple wireguard proto, this will be looks like: NanoPI_R4S with [ PiRogue(internal_wireuard) -> XRAY_server(xray-vless-realty) ] -> Android Phone with XRAY client(xray-vless-realty) and host level firewall that will be forward all mobile trafic to the VPN client NanoPI + Arambian lasted w…

I have to be upfront: I'm not a developer. I'm an ops/observability engineer who knows how to use software to get things done. I know a bit of Go — not much — and I have no formal background in software design. What I do know is what I need, and what was missing. So I built it. Take the code with that in mind. The problem I run a Kobol Helios64 as my home NAS — a five-bay ARM board that's been sitting in a sweet spot between "serious hardware" and "abandoned by its software ecosystem." I tried the usual NAS UIs. They were either too heavy, too opinionated about owning the underlying OS, or simply unmaintained. None of them gave me a clean window in…

Hi folks, Can anyone confirm which if any boards / cpus have functioning HDMI eARC suport? I've seen OrangePI 5 mentioning they have support, but it's unclear if the software support is there in any way; i assume all rk3588 (or likley hdmi 2.1 certified) boards will have hdmi (hardware) support. Similar with Khadas VIM3L or VIM4; hardware support is mentioned w/o any clarity on the software support. Thanks!

Just found this: source: https://blog.qualys.com/vulnerabilities-threat-research/2024/07/01/regresshion-remote-unauthenticated-code-execution-vulnerability-in-openssh-server source: https://arstechnica.com/security/2024/07/regresshion-vulnerability-in-openssh-gives-attackers-root-on-linux/ The vulnerability, which is a signal handler race condition in OpenSSH’s server (sshd), allows unauthenticated remote code execution (RCE) as root on glibc-based Linux systems; that presents a significant security risk. This race condition affects sshd in its default configuration. Are we affected running Armbian ?

I am trying to change `/etc/ssh/sshd_config` parameters but am unable to restart sshd. ``` sudo nano /etc/ssh/sshd_config sudo service ssh restart ``` or ``` $ sudo systemctl stop sshd Stopping 'sshd.service', but its triggering units are still active: ssh.socket ``` neither is reload working either :- ``` $ sudo systemctl reload sshd ```

Java UIO Java UIO offers robust Java interfaces optimized for Linux Userspace IO, emphasizing high performance. Engineered from scratch, it leverages contemporary kernel APIs, libraries, and cutting-edge code generation methodologies, embodying a state-of-the-art cross-platform solution. Rather than reinventing established paradigms, Java UIO harnesses existing standards, avoiding redundant development commonly observed in other IO libraries. Seamlessly supporting JDK 25 LTS, this framework integrates Project Lombok to streamline code, enhancing readability and conciseness. 🌍 The 32-bit & FFM Reality With Java 25, there is no more s…

Hello, I have a problem compiling the TBS driver. mkdir tbsdriver cd tbsdriver git clone https://github.com/tbsdtv/media_build.git git clone --depth=1 https://github.com/tbsdtv/linux_media.git -b latest ./media cd media_build make dir DIR=../media make alliesconfig make -j4 sudo make install" Indeed under Armbian (Linux rock-5b 5.10.72-rockchip-rk3588), warnings during compilation are blocking, unlike the Ubuntu system (where everything passes). /home/marc/Prog/tbsdriver/media_build/v4l/av201x.c:232:22: warning: unused variable 'priv' [-Wunused-variable] error, forbidden warning:av201x.c:232 232 | struct av201x_…

I have installed the armbian CLI o the orange pi 5 and when I try to connect with the pc it not detected . adb devices -l >> List of device attached

I am using Armbian bullsyee on OrangePı3 LTS I would like to install and run exe files on armbian bullsyee I've installed box86 and box64 with wine/wine32 to armbian Eveythings seems ok but when I try to run exe files but it does not run Sometimes armbian is blocking without any alert Could you please advice me concerning How can I install and run exe files on armbian Thankyou for your kindly help

I need to compile a driver on the raspberry my kernel is 6.6.78-current-bcm2711 I need to download linux-headers-6.6.78 can someone help

I got an Orange Pi Zero 3 (1.5GB) to run Adguard Home. I tried the latest Armbian image (25.5.1), first with DE, then without... same problem. I run the config wizard and install AdGuard Home through it, set it up via the browser (192.168.0.6:3000), then reboot to make sure the service loads properly on boot... which it doesn't. Well, the service SEEMS to be running, according to the monitor, but I can no longer access AdGuard via the browser (and yes, I reserved 192.168.0.6 for the Orange Pi in the router).

My system: armbian Ubuntu jammy 22.04 LTS (arrch64) ~/box86$ steam bin_steam.sh[3598]: Setting up Steam content in /home/john/.local/share/Steam steam.sh[3598]: Running Steam on ubuntu 22.04 64-bit steam.sh[3598]: STEAM_RUNTIME is enabled by the user setup.sh[3670]: Updating Steam runtime environment... /home/john/.local/share/Steam/ubuntu12_32/steam-runtime/run.sh: line 85: steam-runtime-identify-library-abi: command not found run.sh[9880]: steam-runtime-identify-library-abi --ldconfig-paths failed, falling back to ldconfig steam.sh[3598]: Couldn't find /home/john/.local/share/Steam/ubuntu12_32/steam-runtime/amd64/usr/bin/srt-logger, logging to …

Has anyone here experienced the same problem on trying to install "Armbian Imager" under Windows 11? Upon running the respective exe-file and - no matter what target directory I choose - I get a failure meassage, somewhat like this: The directory could not be established: Microsoft Edge has no Read/Write access rights to its directory: C:\Users\admin\AppData\Local\com.armbian.imager\EBWebView Should the same issue have been posted here somewhere else, I do apologize. However, before creating the help request I did try to find any entries of similar content, but in vain. So if there's already any remedial comment on this available in the Arm…

hi all, i installed a new build Armbian_community_24.8.0-trunk.596_Orangepizero_noble_current_6.6.44.img.xz into a new SD card i upgraded the OS and all was fine. but during the Octoprint install this phase freezed: Building wheels for collected packages: zeroconf, regex, MarkupSafe, argon2-cffi-bindings, sgmllib3k Building wheel for zeroconf (pyproject.toml) ... \ also the other two ssh terminal was freezed but the IP address (wired and wlan) was reachable, no toher SSH sessions was possible. i powered off the board and restarted i tried to reinstall octoprint ( OctoPrint/bin…

I tried to install OMV on Orange Pi 5 Pro with Armbian Community but it say can't. Is it still possible to install it?

I recently installed the latest Armbian Ubuntu 24.04 Desktop on an OrangePi Zero 2W and I have tried to follow many tutorials from various sites, but I cannot get a VNC server to work. Can somebody help me? Armbian image: Armbian_community_25.5.0-trunk.87_Orangepizero2w_noble_current_6.6.72_gnome_desktop.img

hi folks I've installed the pi-hole version that you guys have kindly delivered through the extra software I can't make it work with the default docker 'virtual network' how can I change it so that docker uses the host network?? I worked out that pi-hole is started using a start.sh but I looked at it and it's double dutch to me! cheers

Hello Armbian community I am a bit confused - I only see images labeled for Raspberry Pi 4 in the Raspberry Pi section of the Armbian website. However, I have seen several videos (like the demo by NicoD) showing Armbian Jammy with KDE Neon running smoothly on Raspberry Pi 5. Are the images for Pi 5B hidden or moved? I am looking for a direct link to download the Pi 5B images (Jammy or Bookworm, desktop or minimal version), instead of having to guess if a "Pi 4" image actually supports the Pi 5. Thank you for your help!

Hello, please help me. I have been doing research these past five days on how I can create a dts file for the Levetop LT7686. This LCD has no D/C or RS pin, which means this LCD is 9-bit SPI TFT LCD. Any clue? I tried with this dts file: /dts-v1/; /plugin/; / { compatible = "rockchip,rk3588"; fragment@0 { target = <&spi4>; __overlay__ { status = "okay"; #address-cells = <1>; #size-cells = <0>; cs-gpios = <&gpio1 52 0>; …

Hi, i'm Alexandre and I use Armbian on cubox as a multimedia NAS, but now I seem to understand that the cubox is getting too old and the support is almost discontinued... So I would like to migrate my nas with all data and web servers to a raspberry. It's possible? If yes, how can I make it? Thanks a lot!

Hi all. I am trying to autologin and auto startx BSPWM but all I get is a black screen when calling startx. Here's my .bash_profile if [ -z "${DISPLAY}" ] && [ "${XDG_VTNR}" -eq 1 ]; then exec startx fi The bspwmrc has permissions 700. Permissions on sxhkdrc is 600. I even gave execute permissions to .xinitrc (below). #!/bin/sh . /etc/X11/Xsession polybar default & sxhkd & exec bspwm It happens if I manually call it, and even when I explicitly tell it to start bspwm (i.e. startx bspwm). The stdout catches a "the command line or make sure that /usr/binis in your path."

Hello, there are no download links for any versions on the board page on the site ( https://www.armbian.com/orange-pi-lite/ ), can I somehow download the old version?

Hello people! I'm wondering how I can use Armbian with a webserver? Is it possible?

https://dl.armbian.com/orangepizero2/Bookworm_current_minimal Armbian_community_25.8.0-trunk.90_Orangepizero2_bookworm_current_6.12.30_minimal I am getting following error while trying to update. root@orangepizero2:~# sudo apt-get update Hit:1 http://security.debian.org bookworm-security InRelease Hit:2 http://deb.debian.org/debian bookworm InRelease Hit:3 http://deb.debian.org/debian bookworm-updates InRelease Hit:4 http://deb.debian.org/debian bookworm-backports InRelease Get:5 https://github.armbian.com/configng stable InRelease [3,992 B] Err:5 https://github.armbian.com/configng stable InRelease The following signatu…

Hi, I have cubiboard 1. I see boot from sd card, system on sata,usb and nvme but i want boot from nand, system on sata,usb and nvme.

I tried to set armbian without networkmanager or netplan, with just ifupdown, isc-dhcp-client and wpasupplicant, but the wlan0 interface doesn't work as expected. IP Link Set WLAN0 Up doesn't want to set the interface to UP. With Network-Manager, the interface works correctly from the start. Do you have a solution to do without Network Manager and Netplan? I would just like to configure /etc/networkinterfaces like on my laptop. Thank you in advance for your answers

Does anyone know if version 22.04 for the raspberry pi4 was disabled by mistake or will no longer have the option to be generated? I'm using git clone --depth=1 --branch=main https://github.com/armbian/build.

For many Years I was using a wlan SSID containing a backslash with no problems. While trying the current Armbian_community_26.11.0-trunk.62_Bananapim2plus_trixie_current_6.18.54_minimal.img.xz the network wlan0 would not connect. Connecting to the guest wlan of the same router worked. I could trace it to the backslash in the SSID which "netplan try" complained about. Escaping that with a additional backslash made "netplan try" accept it, but the connection did not work, the interface wlan0 remained in status "state DOWN". Changing the SSID (removing that single backslash) made it working. I did not find something that prohibits the backslash use…

after i disconnect from ssh of opiz and wait a few hours, after trying to connect nothing happens for ~10 seconds (no network packets from opiz), but after waiting it starts responding and then it works fine until i disconnect and wait again. this is present on opiz in debian armbian 08.23, 11.23, bleeding edge build from yesterday. this is not present on opi pc+ in build 11.23. this doesn't affect any other network services, only affects ssh.

I need to install some stuff on armbian system, which is installed on SD card and it runs on Orangepi PC board. It includes some sripts, Python libraries, etc and some of them require to be compiled on the fly, and it takes several hours when running on Orange PI. So my idea is to mount SD card on PC and run/chroot into installed system with qemu on Linux. So I will get much better performance and all neccesary steps will be performed much faster. Is it even possible to do that? After installation finishes, SD card will be again used to operate on OrangePI PC board.

Haven't found any threads here for setting up libwidevine on armbian. Has anyone had any luck setting it up on armbian 64 bit? I've seen sone snaps and on the raspberry pi OS, they have a package for chromium 32 bit (since there is no libwidevine 64bit yet). Any suggestions?

Hello everyone, I recently installed the version "Armbian 23.11.1 bookworm" on an old Odroid C2, mainly to run Openhab there. Now I wanted to be informed about certain events on my Fritzbox (e.g. window open for too long) via linphone and I also found instructions for this: https://community.openhab.org/t/make-dect-phones-e-g-fritzfons-connected-to-fritzbox-ring-as-alerting-mechanism-from-openhab-should-be-useful-also-to-have-openhab-make-arbitrary-phone-calls-with-alerts-announcements/132940 I installed the package “linphone-nogtk” with version 5.1.65-4. If I type on the console the following commands: linphonecsh ini…

I've been using Armbian for developing an image for running on some custom hardware based on an Allwinner S3 (SoC with a single arm v7 core and 128mb ram) and it has been really helpful. My system now runs the software it was built for, and i love having complete Debian for development, maintenance and debugging. However I would like to have the option of making the system more like an embedded system most of the time : for most of its life it's running a custom application that gets video from a camera, h264 encodes it and sends it and some other data out over a data link. When it's in this mode it would be great if it was more like a buildroot type syst…

Hi all, I have a Nano Pi Core 5.15.74-sunxi system with Focal OS on it. Now I see that files on http://apt.armbian.com for Focal have 0 size. Is there any way to update the kernel without reinstalling the OS from scratch, are any mirrors or archives available? Tnx

Hello, I am new using the "build" tool. I am trying to compile Armbian using this config: # Board and kernel selection BOARD="rock-4se" # e.g., "odroidc4", "orangepi5", etc. BRANCH="current" RELEASE="jammy" # or "bookworm" for Debian # Build options BUILD_MINIMAL="yes" BUILD_DESKTOP="no" KERNEL_CONFIGURE="no" KERNEL_BTF=no # Use custom kernel KERNELSOURCE="https://git.kernel.org/pub/scm/linux/kernel/git/rt/linux-stable-rt.git" KERNELBRANCH="tag:v5.15.92-rt57" # Enable RT patch KERNEL_USE_GCC="yes" KERNEL_COMPILER="aarch64-linux-gnu-" # or aarch64-linux-gnu- for ARM64 # Disable non-needed drivers SKIP_EXTERNAL="yes" SKIP_BOOTSPLASH="yes" BUILD_KSRC="no" ENABL…

During the installation process of Armbian you set admin password, make a new user, set time zone and system langue, BUT not the keyboard layout... Any reason this is not part of the default armbian install process? Keyboard layout should be the first option to set during boot.

Hi I just managed to ssh into my banana pi m2 zero. I noticed it had python 3.10 already installed. But when I tried to pip install, every package ends up saying: ``` ERROR: Could not find a version that satisfies the requirement dearpygui (from versions: none) ERROR: No matching distribution found for dearpygui ``` no matter what package I try. I also tried installing miniconda but the aarch64.sh version for some reason uses conda.exe and the installation process stops there. How do I fix this?

Hey there, I'm trying to use gstreamer as a video player for the tinkerboard 2 armbian build (Armbian Bookworm XFCE desktop stable). It seems that the VPU isn't used correctly, I only get about 20FPS for a 1080p mp4 video (h_264) and CPU flies to a 100%+. On the original and not so good orignal operating system (TinkerOS) there was an extra gstreamer sink plugin made for the RK3999 (rkimagesink). I tried to compile the original plugin from sources (https://github.com/TinkerBoard2/external-gstreamer-rockchip), but there are several dependencies missing and I can't find them either on github / apt. Any idea how to make gstreamer use th…

Orange pi Zero 2 Armbian 24.2.1 Bookworm CLI never shows armbian-config after first restart I tried loading the sd card multiple times. However, as soon as the linux board is restarted it does not go ahead with this command "sudo armbian-config" The cursor goes to next line.Only if i press ctrl+c it goes back to the prompt.

Hi, just to be clear I've zero doubt the problem is me but this is a recurring issue and I've been unable to nut it out on my own. I've found (both with bullseye and bookworm) that installing Wireguard borks my system - ie I am unable to boot after install. I'm running headless and therefore am limited diagnostically (I can't say what errors are occurring when attempting to reboot) I realise this'll make my problem frustrating for a lot of folks to engage with but any ideas at all'd be helpful. When first using Armbian a few years back it seemed as though the issue was that the LTS kernel did not include wireguard support and I discover…

I have noticed that when building images using the same kernel but selecting Ubuntu or Debian base (Bookworm vs Jammy), some hardware doesn't work on one of the images. Since the kernel is identical, why is not the hardware support the same? Is there a different build script for the two bases? Different userspace drivers? Just wondering..

After booting up, the network card cannot be recognized on armsom. The network card is Broadcom's bcm4375. However, it was recognized after suspend once, but it can no longer be recognized afterwards. There is no relevant log in the log. When it was recognized, I wanted to open a p2p connection, but it could not be opened.

How to upgrade armbian from 23.02.2 to 23.5? Shoud I reinstall the os with 23.5 image ? Thanks

I run fldigi on the Inovato Quadra just fine. Built and installed Wsjtx and it does not see any sound cards at all. Is this a known issue or is it something wrong with the build? Thanks for any help.

I have a old Armbian 21.08.1 Buster on a NanoPi NEO and I like to get it fixed. I can only see what is going on though the Serial port on it. It boots up with a lot of things missing. May guess is the swap on the SD card went bad years ago. I like to get this working again it was working real good back then till it did not boot any more. At the end of the boot on the Serial port it looks like this: [FAILED] Failed to start The Apache HTTP Server. See 'systemctl status apache2.service' for details. [FAILED] Failed to start OpenBSD Secure Shell server. See 'systemctl status ssh.service' for details. [ OK ] Started LS…

Hello everyone, I’m trying to flash the following Armbian image, but Balena Etcher throws an error as soon as I load the image:

Hello guys! Firefox Homepage point to https://www.armbian.com. How can I change address of default page?

I use etckeeper on my ODroid-N2. he sends me changes to my /etc/once a day. And regularly I get this change: armbian-leds.conf | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/armbian-leds.conf b/armbian-leds.conf index 8108230..537ea6f 100644 --- a/armbian-leds.conf +++ b/armbian-leds.conf @@ -5,5 +5,5 @@ invert=0 [/sys/class/leds/rtw88-1-1.1:1.0] trigger=phy0tpt -brightness=1 +brightness=0 What is this mess? What is it for?

I've installed Armbian 22.08 Jammy (CLI only) on a Orange Pi 3 LTS and it works like a charm but, apparently installing postgresql breaks logrotate.service... actually on reboot syslog shows the following: ... armbian-ramlog[2065]: /usr/lib/armbian/armbian-ramlog: line 153: /var/log/./postgresql/postgresql-14-main.log: Permission denied ... systemd[1]: logrotate.service: Control process exited, code=exited, status=1/FAILURE ... systemd[1]: logrotate.service: Failed with result 'exit-code'. ... systemd[1]: Failed to start Rotate log files. some things I found out after a shallow research: postgresql package post installation script …

So after reading the docs I decided to build my own Armbian following the build guide chose resolute and edge to get a 7.x kernel and 26.04 lts like system seems to run fine - except 2 things 1) minor - the network activity LED on my turing pi2 board doesnt flash yellow - I can live with that as long as I see activity led flashing and I can ssh just fine 2) annoying- the turing-rk1 boards get hot but I have nice heatsinks and fans applied to them .. only the fans dont work - Following internet guides I send $ echo 255 | sudo tee /sys/class/hwmon/hwmon*/pwm1 which activated the fans for a few seconds .. then they stopped .. now according…

At this moment fails on ARM Cortex-A53 and Cortex-A55, works on RISC-V 64. wget https://downloads.xiph.org/releases/opus/opus-1.5.1.tar.gz tar -xf opus-1.5.1.tar.gz cd opus-1.5.1 sudo apt install autoconf automake libtool gcc make ./configure sudo make install This version brings non-marginal improvements for spoken content at low bitrate.

The default /. bashrc over rides any title or name setting set on the command line for all xterm and urxvt terms. This is very ugly and irresponsible behavior. I'm not sure where the source is kept but those lines of code need to be removed. Setting the prompt is one thing, smashing the title and name is something else.

Hello! I am looking to set up edge monitoring for both rising and falling edges. I can monitor either individually but I cannot activate both edges. I receive: genirq: setting trigger mode 3 for irq 36 failed (meson_gpio_irq_set_type+0x0/0x60) I have attempted to use mraa-gpio, gpiod, and sysfs all with the same result. I'm on a Radxa Zero running Armbian 23.5 Jammy (Kernel 6.1.y). Interestingly if I attempt to run Manjaro on this board I can interface with the pins to get the values and set direction but I have no edge detection. Is the GPIO driver in Armbian patched for Amlogic Meson G12A? Hoping I'm posting in the right place! …

Hello. Is it possible to disable the background bluetooth scanning from the kernel ? I use the hci0 bluetooth device from another process Jan 21 13:00:53 kernel: [169827.582207] Bluetooth: hci0: start background scanning failed: -16 Jan 21 13:01:20 kernel: [169854.495300] Bluetooth: hci0: Opcode 0x200d failed: -110 Jan 21 13:01:20 kernel: [169854.495316] Bluetooth: hci0: request failed to create LE connection: err -110 Thanks

I installed minidlna on a Linux Orange Pi PC 6.12.23-current-sunxi and also on an Orange Pi Zero, but it doesn't work; it doesn't appear in the client, on an LG Smart TV. On a Raspberry Pi, it does work; the configuration files are the same, and there are no network rules blocking any traffic... Any ideas what it could be?

After building many images, often there are combinations of kernel, sbc card and linux base that will just give an error, like this one: Getting sources from Git [ kernel:6.1 rk-6.1-rkr5.1 ] fatal: detected dubious ownership in repository at '/home/steven/build/cache/git-bare/shallow-kernel-6.1' To add an exception for this directory, call: git config --global --add safe.directory /home/steven/build/cache/git-bare/shallow-kernel-6.1 [💥] Error 128 occurred in main shell [ at /home/steven/build/lib/functions/logging/runners.sh:211 run_host_command_logged_raw() --> lib/functions/logging/runners.sh:211 run_host_command_logged() --…

I can't install mpd on Armbian v26.2 rolling for NanoPi Air running Armbian Linux 6.12.76-current-sunxi Packages: Ubuntu stable (noble) user@nanopiair:~$ sudo apt install mpd Reading package lists... Done Building dependency tree... Done Reading state information... Done Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: mpd : Depends: libavcodec61 (&gt…

I normally like building server images because they are small and fast to compile. An then I can add the wanted desktop by "sudo apt install gnome" or other desktop later. But, sometimes I wonder if the desktop images have more features, like hardware drivers, than a server image with an added desktop afterwards. Can this be the case? Or does server images contain the same drivers and hardware support as a image built with a destop included?

I have this question stuck on my head for a few minutes but are there any ide's that support armbian, I know like vscode and that but any other ide's available for arm?

Hello. I'm trying to disable Network-Manager to only use isc-dhcp-client and control network settings via /etc/network/interfaces But whenever I disable or delete Network-Manger and install isc-dhcp-client. After restarting the device it loses communication with the network. Follow the data: Device: nanopi core Armbian Bookworm Kernel 6.6.28 How I have done the procedure: apt purge network-manager apt install isc-dhcp-client echo "extraargs=net.ifnames=0" >> /boot/armbianEnv.txt cat << EOF > /etc/network/interfaces auto lo iface lo inet loopback allow-hotplug eth0 iface eth0 inet dhcp EOF

Linux 6.15 was released yesterday. How long does it normally take before it's ready for the armbian build process?

Hi, I'm using Armbian 24.11.1 bookworm with a V6.6.62 64 bit Kernel on a NanoPi Neo2. To debug, I have a UART/Serial-to-USB connector attached. Other end is on a Windows 11 box where I use Putty. The setup works fine with one minor issue. During the print of the boot messages, suddenly the printed line width of lines with [ <status> ] is limited 70 columns. It starts shortly after the Welcome to Armbian 24.11.1 bookworm! message and a "…" character is used to shorten the lines. This part has normal line length: Welcome to Armbian 24.11.1 bookworm! [ 4.922261] systemd[1]: Hostname set to <nanopineo>. [ 5.6…

Hi. I need to run FAN control on the Rock 3a board. But i don't have rk3568-pwm8-m0-fan.dtbo in boot/dtb-6.0.10-rk35xx/rockchip/overlay. I copied rk3568-pwm8-m0-fan.dtbo from 4.19.193-67-rockchip folder. This script applied on the start: Applying kernel provided DT overlay rk3568-pwm8-m0-fan.dtbo 2698 bytes read in 52 ms (49.8 KiB/s) The /sys/devices/platform/fe6f0000.pwm folder is being created. I apllyed this commands: root@rock-3a:~# echo 0 > /sys/devices/platform/fe*.pwm/pwm/pwmchip*/export root@rock-3a:~# echo 10000 > /sys/devices/platform/fe*.pwm/pwm/pwmchip*/pwm0/period root@rock-3a:~# echo 5000 > /sys/devices/platform/fe*.pwm/pwm/pwmc…

Hello. I own a Orange Pi 5 Plus. This SBC has a RGB led and Armbian uses it to show the system load as a heartbeat blink. The problem is that the 3 colors are out of sync later than 15 minutes from boot. Is there a way to resync the 3 colors? Thanks.

Is there a github repo for armbian-install? On the RockPi-S with both eMMC and SD cards installed, it's showing the devices backwards or un-named in the menu. I'd like to open an issue report to see if it can be fixed.

Hello, I’m facing yet another strange problem, and I am posting it here as well, because I think it could be OS related. Some details about my server: Armbian 26.2.1 trixie Nginx Nextcloud (latest) MariaDB Letsencrypt (updated 3 weeks ago) Until a few days ago, every browser on any of my devices could call the web gui of my server and Nextcloud presented its login page. Then, after the latest OS update, suddenly browsers tell my they can’t connect to the server, but every synching app on any of devices still work perfectly! And I can even access my files on the server by using FolderSync’s¹…

Hello! Im trying to get a program called Jetadvice to run on Armbian Bullseye Minimal CLI. I have installed xfce-desktop on the system. Banana Pi BPI-M5 I have installed the required libs linux-libc-dev:armhf and install libc6:armhf. I have added the --add-architecture armhf. But when i start the systemctl processes for the program they stop after a while. I have manage to install the program on the system one time but i have no idea how i manage to get it to work. Did not document it. The EF.JA.Edge.Installer.InstallService fail. It looks okay but the JetAdvice-Edge.service stops after a few seconds. …

Hello, I am attempting to set my armbian machine up to match my Arch install on my Intel box. I like to use en-us. Utf8 with the 'US intl with dead keys' variant. But I cannot find it. Im currently using the intl variant but that requires the use of altgr. And doesn't work with my keyboard or me. Is there something I need to install to get the 'with dead keys' variant which does not Require the use of altgr?

Hello, I installed https://armbian.hosthatch.com/dl/aml-s9xx-box/archive/Armbian_23.5.1_Aml-s9xx-box_bookworm_current_6.1.30.img.xz on my S905x box with correct dtb and u-boot. So far everything is working fine. Now I want to install Waydroid, I followed the installation instructions here for debian/ubuntu: https://docs.waydro.id/usage/install-on-desktops but when I try to start it it says i's missing binder. root@aml-s9xx-box:~# waydroid init [09:30:45] Failed to load binder driver [09:30:45] modprobe: FATAL: Module binder_linux not found in directory /lib/modules/6.1.30-meson64 [09:30:45] ERROR: Binder node "binder" …

Hi all, I just installed Armbian with OpenMediaVault on a Odroid HC4 (v25.8.2 for Odroid HC4 running Armbian Linux 6.12.48-current-meson64), when I tried to disable automatic updates in armbian-config it purged a lot of packages including openmediavault. Guess this is a bug, in case where should I report it?

Hi looking for an OS for my Orange pi 5 Plus. As I have eye problems I need a full screen magnifier occasionally depending on application font size. I see that Armbian has a version with the cinnemon desktop does that include the accessibility software included in Mint? Thankyou for your reply.

Kde connect is a nice toy controlling mouse keyboard of Ubuntu desktop running gnome from android. Can do more things as well. It is a gnome extension that can be installed with the command sudo apt install gnome-shell-extension-gsconnect All other installations way failed for me. Only for the ones interested....

Just using Armbian for the first time on a Le Potato. Added a USB WiFi dongle, configured it using /etc/network/interfaces.d/<wifi device id>, and /etc/wpa_supplicant/wpa_supplicant.conf. My problems is the DNS server doesn't seem to be set correctly: $ nslookup github.com ;; communications error to 127.0.0.1#53: connection refused But: $ nslookup -q=all github.com 8.8.8.8 unknown query type: all Server: 8.8.8.8 Address: 8.8.8.8#53 Non-authoritative answer: Name: github.com Address: 140.82.112.4 How do I fix this to use the DNS provided by my router using DHCP? My /etc/network/interfaces.d/<wifi device id> f…

I'm trying to use chromium web browser, but it give me this.

close investigation it seems to use grub, not bootp, card written does not show any activity of green led even after 10 minutes from powerup. Do you have some of the magic twanger needed to boot a pi? Thank you, gene1934

Hi guys, I am trying to run xscreensaver (Bookworm, Odroid-XU4) but I am getting this error: odroid ) xscreensaver --verbose XScreenSaver 6.06, released Dec 2022 -- 6 months ago Copyright © 1991-2022 by Jamie Zawinski <jwz@jwz.org> xscreensaver: 12:34:29: running in process 12038 xscreensaver: 12:34:29: XInput extension missing I am trying to make xscreensaver working, it used to work with Buster, however if I did something specific I totally forgot about it, however comparing the older packages with the newer ones looks are matching... Old packages: libinput-bin install libinput10:armhf install libxcb-xinput0:armh…

Guys i have an orange pi zero 3 4GB RAM version, with armbian ubuntu running currently with a static ip, and i have installed a vpn service on it and it works wonderfully, but it barely uses all the cores and the ram, so i was wondering about using some kind of virtual machine service like qemu-kvm, lxd or even docker to run virtual machines inside. I know many would say go for docker, although what i need is something closer to a VM than to a container, because i need these VMs to have their very own static ips connected to the network and isolated from the others yet able to send and receive traffic between them and the network, i have read that this kind of behav…

Hi all, I've been using Armbian on two Cubietrucks for a decade and had to install the latest version (CLI Armbian 23.8 Bookworm Kernel of Aug 31, 2023) to one of them. The other still runs Buster to my fullest satisfaction. What I noticed, however, is that - among other changes - APM is no longer available. Therefore: Is there any other way to reliably cause HDD spindown after a certain time (say 20 min) even if there's no battery-power mode but 24/7 AC power? Thanks in advance for any help. Giunti

Good afternoon everybody! My name is Andrade and I would like to know if anyone still has the old versions of the RK322x, preferably version 21

On Armbian 25.2.1, I can't find package tags. In contrast, on a pure Debian host (non-armbian), the command "apt-cache show gcc" says in part: Tag: devel::compiler, devel::lang:c, devel::library, implemented-in::c, interface::commandline, role::devel-lib, role::metapackage, role::program, suite::gnu, works-with::software:source I'd also like to see tags on Armbian so I can search for packages based on their tags. Thanks.

sometimes apt tries to use fastmirror.pp.ua and it fails since a few weeks ago because russian government banned most *.ua domains and some ukrainian ip addresses

I recently used Linphone for an audio call from my laptop to my desktop and it works for audio calls in command line mode With video calls, it is promising, but it complains with MSvp8 media errors (most likely can't use decoding libraries) I really want to use them in my armbian SBC since it is so lightweight (and my ili9341 LCD would look nice with a video call ) Does anyone here have experience with Linphone and BareSIP (another SIP video client, even more lightweight). The only discussion I see about it is in the Linphone google group and the german forum for "DoorPi"... but I can't see a guide to install and use it.

Disclaimer: I know it's not a good idea XD Is it possible somehow to upgrade the prebuilt image Armbian 12/OpenMediaVault 7 to Armbian 13/OpenMediaVault 8? Is there a guide?

I have been trying to download Ubuntu 24.04 Desktop images with Armbian Linux v6.6 for Jetson Nano of which the image size is 1.5gb. But the download always stopped at 200+MB. Anyone know why? Thank you.

# ISSUE * Using armbian-config -> softy -> install Syncthing fails after message saying settings for inotify are changing * No further output * Control-C returns control However, my password was changed?!? Just to make sure I wasn't going crazy I rebooted into SD card version of Armbian that was used to write to eMMC and confirmed my password is correct. It appears the script to install Syncthing is changing my password so that I cannot use the system?!?

Back in the days, i've installed armbian on my "Odroid XU4". those where the days when "buster" was still a thing. In the meantime, I've updated the system (change apt repos; run 'apt full-upgrade'), and I'm now running "bookworm": # lsb_release -a No LSB modules are available. Distributor ID: Debian Description: Armbian 24.5.5 bookworm Release: 12 Codename: bookworm unfortunately, /etc/armbian-image-release still thinks i'm running buster (and armbian-20.02.7): # PLEASE DO NOT EDIT THIS FILE BOARD=odroidxu4 BOARD_NAME="Odroid XU4" BOARDFAMILY=odroidxu4 BUILD_REPOSITORY_URL=https://github.com/armbian/rkbin BUILD_REPOSITORY_COMM…

Does running ambian-upgrade do the exact same thing as running apt update and apt upgrade?