Amlogic meson

Hello, So I have ODROID C2 running latest Armbian bionic with kernel 5.6.11-meson64 #trunk.130. I have a Quectel E25 4G LTE modem connected via USB port. Everything works like a charm - BUT - whenever I try to download (or upload) even small amounts of data, I get kernel panic and the process hangs. Sometimes, the whole device crashes. It happens only when I try to download or upload data. Even trying to paste large amount of text into a terminal text editor causes kernel panic. This does NOT happen if I'm connected via ethernet. Here's the dmesg (while I was trying to wget a file) - [ 155…

I'm currently running Armbian 5.60 on an Odroid C2. Tried the new mainline kernel version (5.71) on the weekend and everything looked fine at first, but when I got to starting one of my docker containers, it failed. This container uses armhf binaries. Is there some way of enabling armhf support with the new mainline kernel builds of Armbian, or do I need a custom build now? I installed docker via armbian-config. As far as I can remember, I did not have to do anything special to get this working on the 3.x kernel build... Any pointers in the right direction would be appreciated. Thanks and best regards, Ulr…

Hi , i buiild a SPDIF connector like shown here: https://forum.odroid.com/viewtopic.php?t=21477 it uses the J7 SPDIF output which is connected to HDMI. On coreelec i can clearly see a HDMI soundcard output with aplay -L , i dont see that on armbian.... Is odroid c2 spdif output on armbian working ? why do i not see this soundcard that f.e. libreelec is showing ( i have 2 odroid c2s , one is running coreelec in my living room with HDMI connector working) im using a little older armbian distro since the latest has ethernet issues on C2 (im using 20.11 , kernel 5.9.10 debian edition ) regards, Simon

https://www.armbian.com/radxa-zero2/

I have been trying to build a C2 image with xenial and without including a desktop using the armbian build script. I have tried putting the toolchain in /opt/toolchains (like odroid's wiki states) and also in the build script's directory under toolchains. I've placed the proper export lines to each path in .profile & .bashrc but no matter how i go about this I always have the compile.sh script error out after "Cleaning [ linux-odroidc2/odroidc2-3.14.y ] I am using a VM that has gcc/g++ 4.9 installed and is running ubuntu xenial (would not using 14.04 have something to do with this?). /home/kyle/build/lib/common.sh: line 230: /home/kyle/build/toolchains/gcc…

I'm running Armbian from a emmc 16GB card. When I use the web browser the mouse constantly flickers, is there any way to get this to stop? Is there a graphics driver I should have enabled? When I select Additional Hardware Drivers none show up, so maybe there isnt a GPU accelerated driver available. Also switching between desktops feels sluggish. Maybe Im expecting too much performance from a $50 SBC. Thanks for your help & time in making this distribution. Im just looking to make the best user experience possible.

Hi! Odroid&ARM newbie here! Trying to boot Armbian on HC4, no picture coming up. I guess my problem is my old LCD display that im connecting with hdmi-vga connector. Display and connector are working, i tried with Odroid ubuntu SD-card, but when i ordered i didnt realize its Ubuntu-minimal. (My internet comes from mobile wifi hotspot, and i have no idea how to install GUI in there. Also Odroid wifi-bluetooth dongle is a pita) In Ubuntu, to get the monitor working i changed lines in boot.ini and conf.ini, no idea which of those files is the right one. My working lines in those Odroid Ubuntu 20.04 files are: setenv display_autode…

Hi I build ubuntu xenial with next kernel (4.13.....) and image don't boot https://pastebin.com/QHQfHHSa and I also can't boot debian 9 with next kernel https://pastebin.com/yXjWk5Wh Any idea where is problem?? all fine with dev kernels

hi all, as mainline kernel options for Odroid-C2 are still not ready (USB not recognising DAC unless externall HDD connected during boot) .. have just switched back to 'default' build. I noticed system to be much slower then usual .... esp. when involving any writes. SD-Card is Sandisk 16GB and is working very well in OdroidXU4 and NanoPi NEO. When copying a few 100kB file takes few seconds: time cp /usr/bin/ssh ~/ ; time sync real 0m0.012s user 0m0.000s sys 0m0.010s real 0m2.982s user 0m0.000s sys 0m0.010s I tried with 'dd' command to see how fast simple writes are going and got at best 200kB/sec .... Does anyone have suggest…

Hi, I would like to run a 32 bits (armhf) Debian or Ubuntu image on an Odroid C4. Do you know if this is possible, and if it is, can you point me to the right image ? Cheers, jf

Hi all at present state , i installed slim or gdm , but they are not good to start GUI automatically . so i start GUI by startx . what display manager is good for ondroid-c2 ? cat .xinitrc startxfce4 --- regards i write the install steps at http://odroid-akita.blogspot.jp/2016/04/odoroid-c2.html (japanese input is OK)

Odroid C2 not booting Armbian 5.25 Odroid C2 Debian jessie default 3.14.79 after reboot te system never came up. red solid light. blue blinking light. Please help. uart log added: Spoiler GXBB:BL1:08dafd:0a8993;FEAT:EDFC318C;POC:3;RCY:0;EMMC:0;READ:0;CHK:0; TE: 269146 no sdio debug board detected BL2 Built : 11:44:26, Nov 25 2015. gxb gfb13a3b-c2 - jcao@wonton Board ID = 8 set vcck to 1100 mv set vddee to 1050 mv CPU clk: 1536MHz DDR channel setting: DDR0 Rank0+1 same DDR0: 2048MB(auto) @ 912MHz(2T)-13 DataBus test pass! AddrBus…

Hi, with my Odroid C2 I experience a strange behaviour regarding Armbian Updates. Initially Armbian_5.38_Odroidc2_Debian_jessie_default_3.14.79 was installed, after installation I did an upgrade to Debian Stretch. Meanwhile a new Armbian version v5.44 / v5.45 with a newer Kernel is available for Odroid C2 devices. If I do "apt update" and "apt upgrade", a newer version isn't visible or would be installed? The system is stuck on v5.38 with Kernel 3.14.79: " Welcome to ARMBIAN 5.38 stable Debian GNU/Linux 9 (stretch) 3.14.79-odroidc2 Linux lx 3.14.79-odroidc2 #14 SMP PREEMPT Thu Jan 25 05:46:07 CET 2018 aarch64 System load: 0.39 0.28 0…

Images tried : Armbian_21.02.1_Odroidc1_bullseye_current_5.10.12.img.xz Armbian_22.08.0-trunk_Odroidc1_jammy_current_5.18.19.img.xz Results: Armbian_21.02.1_Odroidc1_bullseye_current_5.10.12.img.xz Network is recognized and ssh login possible + Serial console output working. ping gmail.com is working Armbian_22.08.0-trunk_Odroidc1_jammy_current_5.18.19.img.xz Network is not recognized and ssh login possible + Serial console output working. ping gmail.com is not working

Hello, we are testing set of 50devices and on 20%-30% of them we are detecting errors, which seems as hardware issues with eMMC cards. Issues looks very similar to us. Example of device usage is: 1) device boots operating system (Armbian GNU/Linux kernel 3.14.79-odroidc2), 2) device works as expected for hours/days, 3) system logs starts containing emmc errors, 4) system freezes with console message: Message from syslogd@avast-hkc213254dfea768 at Feb 14 13:49:58 ... kernel:[189164.931207] Disabling IRQ #250 After consultation with Hardkernel we tried theirs ubuntu image and it looks better. After 4 hour test we do not detect broken card (test continues),…

Hi, I'm working on adding baudrate changes to recent Uboot v2017.11 for the Odroid C2. Took some time to understand the way Uboot handles access to hardware... I tried to get some clean solution, and wanted to ask on how I can submit my changes to the main developpers. Would be great if you could give me a hint on that issue. I still need some time for testing the changes, so it is not urgent (we need this feature to have 9600 8N1 access to the C2, as it will be deployed on a place without easy access So far, Michael

Hi, I recently installed a fresh Armbian and did some tests. I noticed two major problems: Video is not accelerated: it is absolutely unusable with kodi Bluetooth seems absent (missing from DTB? other reason?) Please find below execution outputs of some commands: root@nanopik2-s905:~$ cat /etc/armbian-release # PLEASE DO NOT EDIT THIS FILE BOARD=nanopik2-s905 BOARD_NAME="NanoPi K2" BOARDFAMILY=meson-gxbb BUILD_REPOSITORY_URL=https://github.com/armbian/build BUILD_REPOSITORY_COMMIT=b9814056 DISTRIBUTION_CODENAME=focal DISTRIBUTION_STATUS=supported VERSION=20.11.3 LINUXFAMILY=meson64 BRANCH=current ARCH=arm64 IMAGE_TYPE=sta…

Hi, I have C4 installed sdcard with bullseye from armbian website and all good first steps, change pass etc, update upgrade, no error on console and reboot from console it simple not rebooting, I need to power off all the time. I tried Jammy just for check that is worked so what is wrong with Bullseye? My armbianmonitor -u is at http://ix.io/4cyZ

I can't get the ubuntu gui desktop to use the entire 2160p screen - it only uses 1/4 (1080p upper left rectangle.) The settings menu for display is locked to 1080p. I've searched and there are explanations as to how to set boot.ini to get 2160p (which works) but the ubuntu desktop won't use the full screen. What do I need to do to get a full screen GUI display? Thanks.

So far I can only get the C4 to boot from a EMMC card, not a SDHC card, is that true or an I doing something wrong? I install the image with "dd if=./armbian...img bs=8M of=/dev/sde; sync; sync". That makes a bootable EMMC card, but all attempts with the SDHC card it just seems to sit there.

I flashed the image Armbian_20.08.1_Odroidc4_buster_current_5.8.5.img on my new odroid c4 without installing the latest updates (see my other post with no boot anymore after kernel update). After this I started via softy installation of omv5. During installation I wondered why my ssh connection was gone without any output. During installation there is a reboot of the os and the networking is not coming up anymore. I tried to find out and found: - armbian uses network manager for networking and the default config file is for dhcp - after omv5 installation network manager seems to be deinstalled and also there is a new empty config file under /e…

I was running Armbian Bullseye for a while with OMV 6. I happened to see OMV has gone to v7 and Armbian to bookworm. I went here to get the SBC/IOT bare version of bookworm: https://www.armbian.com/odroid-hc4/ Problem 1: is it said: "You are using an automated version meant only for developers..." Problem 2: it did not come with Armbian-config which I had to install manually Problem 3: Armbian-config 'softy' refused to install OMV saying it can only be installed on Buster (OMV5) or Bullseye (OMV6) Finally: https://wiki.omv-extras.org/doku.php?id=omv7:armbian_bookworm_install states specifically not to use any developer v…

Hello All, how can I get hardware video acceleration for S905x on Debian/Armbian using Gstreamer? I installed gstreamer, and using 'decodebin' and 'fbdevsink' gives terrible performance (software decoding). I did some searching and found that amlogic has two GST plugins for hardware accelerated video decoding: "amlvdec" and "amlvsink" I was able to locate the source code here: http://openlinux.amlogic.com:8000/download/ARM/filesystem/ I downloaded the newest archive "arm-buildroot-2016-08-18-5aaca1b35f.tar.gz" Would this work with debian/Armbian? When I try to compile the plugin, I get the message: so I searched online, and found: ht…

hi all . i run odoroid-c2 foremaly i runed nginx with auth basic by next nginx.conf successfully in orange pi PC . nginx.conf is ------------- events { worker_connections 800; } http { include mime.types; default_type application/octet-stream; index index.html index.htm; keepalive_timeout 65; server_tokens off; server { listen 80; server_name localhost; #<-for test #root /var/www/d1; root /var/www/d2; } server { listen 80; server_name n------------n.dip.jp; root /var/www/d2; auth_basic "clos…

Hi all . i hear sound by mplayer X.mp4 but i cannot hear sound in youtube with iceweasel . i lack something . what is it ? aplay -l **** List of PLAYBACK Hardware Devices **** card 0: ODROIDHDMI [ODROID-HDMI], device 0: I2S.26 dit-hifi-0 [] Subdevices: 1/1 Subdevice #0: subdevice #0 cat .asoundrc pcm.!default { type hw card 0 } ctl.!default { type hw card 0 } --- regards

I successfully flashed the "Armbian_24.11.1_Odroidc4_noble_current_6.6.60-kisak.img" on my emmc, and everything boots, runs, and updates fine... My 2TB USB3.0 seagate HD, /dev/sda, is seen fine in "dmesg", as well as "lsblk" and "blkid", but when I add my UUID, ..., in /etc/fstab it fails to mount at boot. see below line in /etc/fstab for above /dev/sda1 : UUID=<output-of-bklid-for-sda1> /media/USB01 ext4 defaults 0 1 To test the above /etc/fstab mount I ran: sudo findmnt --verify (which completes successfully) Also, if I run: sudo mount -a (it manually automounts /dev/sda1 -> /media/USB01 successfully). …

I have an application that depends on the Linux HID USB gadget via configfs on the USB OTG port. It works under Raspberry Pi OS (2020-05-27-buster-lite), but I'm having trouble getting it to work under Armbian (Armbian_20.05.2_Odroidc2_buster_current_5.6.15). Specifically, I'm having trouble getting the configfs module to run. What I've done so far: Removed the J1 jumper as described on the ODROID wiki. Recompiled /boot/dtbs/amlogic/meson-gxbb-odroidc2.dtb to set dr_mode = "peripheral"; as described in this ODROID magazine article. When I run this script with sudo: #!/usr/bin/env bash modprobe libcomposite cd…

Hi guys, I have issues with audio - only dummy interface shown - after the system update of ~2year old armbian. I did not find any solution, so I decided to go for latest build - so I flashed latest image Armbian 23.02 Jammy XFCE to the emmc drive of my odroid C4. System started ok, but unfortunately no HDMI audio device shown anyway. I have no idea what to do, my dmesq is full of these lines: [ 13.936415] fe.dai-link-0: ASoC: no backend DAIs enabled for fe.dai-link-0 [ 13.937748] fe.dai-link-0: ASoC: error at dpcm_fe_dai_prepare on fe.dai-link-0: -22 ... [ 935.795034] fe.dai-link-0: ASoC: no backend DAIs enabled for fe.dai-link-0 [ …

Hi - I am trying to find out from the fora topics here as well the technical details page if the ODROID-C2 has an extension to the ARMv8 instruction set to improve the speed of applications, like openssl/openvpn, performing encryption and decryption. On the intel platforms this feature is known as AES-NI. Therefore is similar hardware on board and if so, which kernel module enables this feature please? Also when will " Armbian " stretch be available ( 17 July just like debian 9? ). Cheers

I have a 4-port USB 2.0 hub powered by a 5V 3.1A power supply that does not show up on my C2, with or without devices connected to it. I have the C2's USB OTG port disabled as I use a DC power supply. $ sudo lsusb Bus 001 Device 004: ID 1df7:3010 Bus 001 Device 002: ID 05e3:0610 Genesys Logic, Inc. 4-port hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub dmesg does not log the hub connecting/disconnecting. How do I troubleshoot this? armbianmonitor -u: http://ix.io/1DzS

Hello, I recently bought Odroid C2. Legacy Ubuntu Server image works great, but Ubuntu Server Next (mainline kernel) doesn't boot. SSH shows network error: connection timed out, screen is black. Is it something wrong with current image or my hardware? (Other OSes are working fine like legacy dekstop, DietPi). Power supply is official barrel DC jack 5V/2A.

my TFT shield need fb_odroidc_tft32 missed module from there ) https://github.com/longsleep/ubuntu-odroidc/blob/master/drivers/video/fbtft/fb_odroidc_tft32.c

It seems the Armbian test image for the NanoPi-K2 only works on an SD card. At least mine doesn't seem to boot when I put it on the 8GB eMMC module. Is there an eMMC armbian image for the NanoPi-K2 or is there something I need to do to get the existing image to boot on the eMMC module?

Hi All, I'm tring to make Ocroid C2 working with PiSound shield. https://github.com/BlokasLabs/pisound/tree/master/pisound-module I've compiled the module, an I'm able to install it properly. I've changed the DTS in this way --- pisound-overlay.dts 2019-01-22 23:28:59.460427794 +0000 +++ pisound-overlay_odroid.dts 2019-01-23 01:48:20.198204778 +0000 @@ -20,10 +20,9 @@ /dts-v1/; /plugin/; -#include <dt-bindings/gpio/gpio.h> - +#include "/usr/src/linux-headers-4.19.15-meson64/include/dt-bindings/gpio/gpio.h" / { - compatible = "brcm,bcm2708"; + compatible = "amlogic,meson-gxbb"; fragment@0 { target = <&spi0>; …

It seems the networking in Armbian 5.59 is messed up. It creates a eth0 adapter (disabled) and Wired network 1 adapter. You can delete these in nmtui, but they always return. I had the same issue with NanoPi Duo using mainline Stable. I can get it to work a bit using armbian-config, removing all interfaces and configuring IP, but it gets screwed up again. I cannot trust to run 5.59 headless because I have no way to get into the SBC without hooking video back up.

Thanks to g4751 for doing the tests for Odroid-HC4. The tests for the Odroid-C2 were performed by myself. Tests were performed on Armbian 24.08 Official releases. Fix is to add a section to the DTB to enable a recently (last year) added kernel driver "meson64-reboot" that is an updated version of the "odroid-reboot" in older kernels. For Odroid-C2: - save your existing DTB - use DTC to convert DTB->DTS - modify the DTS with the code below - use DTC to convert DTS->DTB - reboot (will fail because new DTB not loaded yet) - POR (will now load the new DTB) - log-in - reboot should now work. …

I have tried every one of the latest 24.x images on my newly purchased LaFrite s805x-ac board. NONE worked. They all gave an error about overwriting reserved memory. I randomly chose a 20.x image and it worked immedaitely. I do not currently have time to do further analysis.

Hi, after getting access to GPIO pins now (thnx to Neil ) I wonder that accessing pins be bash scripts gives me quite different access times. For example, I use one pin to switch a connected device on and off by a MOSFET. Setting the pin low is fast, setting it high takes about two seconds. I use the following shell script: #!/bin/bash echo "0" > /sys/class/gpio/gpio102/value ("0" for off, "1" for on) Any ideas? The pin seems to switch immediately, while the shell prompt takes about two seconds to return - but ONLY in case of "1". The corresponding pin is set to output, of course, before Best regards, Michael …

What's happen with my nano pi k2 just boot up and stop here. GXL:BL1:9ac50e:a1974b;FEAT:ADFC318C;POC:3;RCY:0;EMMC:0;READ:0;CHK:AA;SD:0;READ:0;0.0;CHK:0; no sdio debug board detected TE: 194208 BL2 Built : 13:48:56, Sep 23 2016. gxl g7459bd4 - jianxin.pan@droid06 set vcck to 1120 mv set vddee to 1000 mv Board ID = 6 CPU clk: 1200MHz DQS-corr enabled DDR scramble enabled DDR3 chl: Rank0+1 @ 792MHz - PASS Rank0: 1024MB(auto)-2T-11 Rank1: 1024MB(auto)-2T-11 DataBus test pass! AddrBus test pass! Load fip header from SD, src: 0x0000c200, des: 0x01400000, size: 0x00004000 New fip structure! Load bl30 from SD, src: 0x00010200, des: 0x01100000, size: 0x0000d600 Loa…

Hello. I tested Armbian Jessie with Odroid C1+ and encountered several issues, would like to know if they're known or if I've done something wrong. 1) Odroid C1+ gets no display if not booting into X11. Framebuffer text console is not present at all. This makes it impossible to do any kind of configuration if not connecting via SSH. 2) If connecting via SSH, updating the system and rebooting, it doesn't seem to boot anymore. The machine is not available for ping, and I can no longer connect to do any further configuration. 3) Issuing "reboot" over SSH seems not to reboot the board, instead power needs to be cycled manually. I'm tried server and desk…

according to here 5.13 is latest kernel https://www.armbian.com/odroid-c2/ but when I issue: sudo apt-get update && sudo apt-get dist-upgrade -y I'm still on 5.10....

Tested on Odroid C2 system startup from the USB stick (via script s905_autoscript, I prefer to run existing images without any modification). If add the script to the boot.ini a few lines, you can run images from a USB drive. This can be useful if there is on eMMC or on a SD card configured with the system and felt the need to run temporarily another system (without overwriting the existing SD\eMMC media). For example, for temporary checks new images, when unknown , to like this system or not, or for testing settings\software-that-be not to destroy the already set up working system. Process start automatically if the connected USB drive and it has a script that starts the…

Hello, I freshly installed Armbian Buster 20.02.3 with 5.4.21-meson64 and also compiled Kodi 18.6 from source by following this guide. It seems however that I cannot get any HDMI sound and ALSA gives me: aplay: device_list:272: no soundcards found... Could it be that I am missing something fundamental or is this a known issue? Thank you. Manos

Hi folks, I flashed the Armbian Jessie server image to sd. Then I ran update and upgrade after the system booted. I installed xorg and MATE desktop. No problems anywhere. I did not install a display manager as I want to login from tty. I basically performed the exact same install I have done for 15 years(since Gnome2). And a problem I haven't seen in 10 years or more rears it's ugly head as I type in "startx". MATE desktop boots up and I have no mouse or keyboard... I hit ctrl-alt-del and I have keyboard in the shutdown prompt. lsmod meson_ir 2943 0 joydev 10384 0 spidev 5785 0 spi_gpio …

Hi! I downloaded 'Armbian_5.20_Odroidc1_Debian_jessie_3.10.103.7z' today, put it on a SD card and successfully booted and 'ssh'ed in it. The board - an old C1 - is running fine. Now I want to install fail2ban and mc, but with the original 'sources.list' for apt there's no way to to that via apt-get. Will I run into difficulties if I change the 'sources.list' to the normal Debian ones and make my installations, updates and upgrades from there? Frank

Hi, I installed yesterday armbian on my Odroid C2. I would like to use an USB to serial converter but, the device is not detected by the system. When I plug the USB device, I just have this message in the kerner.log file and the USB device is not created : Nov 18 12:04:41 localhost kernel: [59003.780747] usb 1-1.3: new full-speed USB device number 13 using dwc_otg However, when I run lsusb the device is listed : root@odroidc2:~# lsusb Bus 001 Device 013: ID 1a86:7523 QinHeng Electronics HL-340 USB-Serial adapter Bus 001 Device 002: ID 05e3:0610 Genesys Logic, Inc. 4-port hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID…

Hello. I´ve buyed an Odrid c2 and installed armbian. Now i installed the x11vnc server and it works only when i start it manual. It start in putty with: sudo x11vnc -usepw -forever -display :0 or with the Desktop gui version. Then i can connect from my Windows PC. I installed it with these: http://www.gtkdb.de/index_36_2265.html(yes, i renamed it with my account name) but the autostart doesn´t work. Then i edit the /etc/rc.local file and wrote x11vnc -display :0 -forever -usepw -ultrafilexfer before the exit 0 command. but it doesn´t start after reboot. Can anyone help me with this please? Sorry for my bad engl…

Hello, does anybody run above configuration successfully? If yes, what are the steps to make this happen? I did this: sudo apt install xorgxrdp xrdp But this is the result: xrdp (0.9.1-9+deb9u3) wird eingerichtet ... Generating 2048 bit rsa key... ssl_gen_key_xrdp1 ok saving to /etc/xrdp/rsakeys.ini Created symlink /etc/systemd/system/multi-user.target.wants/xrdp-sesman.service -> /lib/systemd/system/xrdp-sesman.service. Created symlink /etc/systemd/system/multi-user.target.wants/xrdp.service -> /lib/systemd/system/xrdp.service. A dependency job for xrdp.service failed. See 'journalctl -xe' for details. invoke-rc.d: initscript xrdp,…

Hey, I am not able to compile a .ko kernel module : below the error. I think it's fair to say that it may happen on many boards. I guess you supposed that before I had to get the linux-headers on. which required to tune the build config and include the headers during the build for that specific meson64 release at least. Saying that after rebuilding all I am stuck again on the vdso as i can't build a .ko easily. I think many people but i let the team taken the decision may be stuck at one point on linux-headers or to compile a .ko module. I would recommend to have DEFAULT parameter YES for the linux-headers as well as all that would be required…

I am trying to follow various tutorials on full disk LUKS root encryption for Odroid C2 with a emmc. Every tutorial I have found makes use of a separate partition for boot. Something like /dev/sdx1 (vfat) 100Mb. Mostly raspi tutorials but a few others that are step by step instructions out there as well. The armbian.img file does not have a separate boot partition when I use dd to transfer to emmc or sdcard. Do I just make a vfat partition on /dev/mmcblk0 (the emmc) and copy the /boot folder over to /dev/mmcblk0p1, and run dd again to put the arbian.img on /dev/mmcblk0p2? Anybody know of a what I need to do to make that partition so I can try some…

Hi, I'm currently considering an ODROID C2 to replace an Rpi3 as a combined headless tvheadend and mysql server, with GPIO control of a relay for a fan. It's upgrading to Gigabit LAN that I'm after, to avoid the occasional bottleneck to my NAS. Legacy sounds like it's working well enough on the C2, but the USB T2 tuners I'm using are only supported in kernel 3.19 or above... The C2 page suggests only legacy is available, but the package repository page suggests otherwise: linux-image-odroidc2 3.14.79 Amlogic S905 Hardkernel Odroid C2 linux-image-next-odroidc2 4.13.3 Amlogic S905 (meson64) Hardkernel Odroid C2 …

Hello, I using up to date Armbian Stretch with kernel 4.19.41-meson64 #5.85 SMP PREEMPT Wed May 8 12:40:37 CEST 2019 aarch64 GNU/Linux. I started using TP-Link TL-WN722N V1 USB WiFi dongle recently. Unfortunately Armbian has crashed and rebooted once during I using such USB dongle. I tried to reproduce this bug once more but I can't. I have installed firmware-atheros package for this USB dongle. Should I install armbian-firmware-full package instead of firmware-atheros? It could help? Log: Spoiler May 11 14:23:25 xxx kernel: [ 2690.401749] usb 1-1.1: new high-speed USB device number 8 using dwc2 May 11 14:23:2…

Hello Armbian Community, I'm reaching out for help with a critical issue I've been facing on my ODROID HC4 server since updating to Armbian_community 24.8.0-trunk.4xx. I put 4xx because I don't know which version caused the issues. It was yesterday and I just saw updates in my OMV workbench, did the updates and then rebooted and then was unable to access OMV anymore. I have since upgraded to trunk.500 last night, didn't help, and trunk.501 this morning also didn't fix anything. Here’s a detailed account of the situation and the troubleshooting steps I've taken so far. Background: Device: ODROID HC4 OS: Armbian (l…

Hello, i bought my first odroid, and decide to install armbian. I download armbian from official server, and i try write os using rufus on Windows. I choose 'dd' and check raw file, rufus write image without error. When I plug MicroSDHC card, system starts, red led is on, blue flashing. From first minutes system have got big lag, I wait 50 minuts and do nothing in first boot. Last text on screen is **** Starting Update UTMP about System Runlevel Changes... [ OK ] Started LSB: PLEASE BE PATIENT AND DO NOT INTERRUPT THE FIRST REBOOT [ OK ] Started Update UTMP about System Runlevel Changes. *** I use Odroid c2 rev 2.0 20160226 and SanDisk ultimate Micr…

I only test on my OdroidC2 so this find may affect more. As repeatedly mentioned, the C2 has usb detect issues. For us, a main culprit not discussed yet is the default kernel config. Having both: CONFIG_USB_EHCI_TT_NEWSCHED=Y CONFIG_USB_OHCI_HCD=Y For USB1.1, these should be one or the other, never both. Mainline has: CONFIG_USB_OHCI_HCD=Y and CONFIG_USB_EHCI_TT_NEWSCHED is not set. For the OdroidC2, CONFIG_USB_OHCI_HCD=N is proper. As it has no OHCI and USB2 handles that for us. Forcing the USB power on state has helped workaround this issue, by keeping the driver tied to the device in the kernel.

Hi guys, I just recompiled my patches from old 2015 Uboot to the 2018 version, allowing setting the baud rate in Uboot (for accessing it by 9600 8N1), and saving envs in eMMC. First one works, I can switch easily baudrates now, but "saveenv" fails, spitting out a lot of error messages: => saveenv Saving Environment to EXT4... Card did not respond to voltage select! ** Bad device mmc 0 ** Failed (1) I also see that apparently the settings are being loaded from a wrong partition: U-Boot 2018.07-armbian (Oct 28 2018 - 10:43:58 +0100) odroid-c2 DRAM: 2 GiB MMC: mmc@72000: 0, mmc@74000: 1 Loading Environment from EXT4... Card di…

Hi everyone, I've just installed Armbian on my Odroid C2 but I'm struggling running Iceweasel Firefox. I have a segfault everytime even in safemode, any guess of the problem (I made both apt-get update & apt-get upgrade). Thanks !

Hello, i've experienced eMMC Problems with the latest stable Jessie Armbian-Image for Odroid C2. Thats why i installed Debian_jessie_next_desktop_nightly.7z from the nightly builds. After my first experiences it seems that image is working good since i did all of my configurations over serial console and ssh. Now when connecting my display it's not working. Which is 1440x900p60hz and connected over a hdmi<->dvi Adapter to the board. The device is starting with a black screen and not not detecting any display when i try to start the X-Server manually and there are also no /dev/fbdev* devices. Since the boot files b…

I am using: Armbian_5.14_Odroidc2_Debian_jessie_3.14.71 I am a bit stumped....if I run with 3 network interfaces, everything is fine. If I add a fourth interface...the system locks up...even if the 3rd and 4th interface have no ip address. They just need to be live! I have tried 4 drastically different interfaces in case the device driver can't handle it. Anybody have any thoughts or suggestions?? THank you!

When I start the OS for the first time, the cursor is not visible, either at the command line or in the nano editor. I'm running the HDMI output through a HDMI->VGA adapter, which is then fed into my KVM along with the mouse and keyboard. The monitor is capable of 1920x1200, and it all works fine except for the cursor not being visible. I've tried various escape codes, etc. Nano never displays a cursor. When I log in via SSH the cursor is plainly visible. I'm trying to configure the WiFi, which doesn't seem to want to work if the ethernet is connected, so I'm stuck at the tty terminal. Any suggestions?

Hi. I have experimented to make a csc for Khadas Vim2, similar to the one we already have for Vim1. It works pretty well. But I just wanted to check with the dev community before incorporating it to the build system, how do you guys feel about it.

Hi armbian team ! I've been running my Odroid C2 for almost 2 years with the only then available distro for my board : odrobian. As that distro is now left without maintainer, I'm turning to other distros and am glad to see my board supported by armbian (which I currently use on various Orange Pi boards). Is there a path to migrate my Odroid C2 installation from odrobian to armbian with minimum downtime ? (it's a server) Or should I consider installing everything from scratch on another board and copy my configuration there ? Thanks !

Hi, maybe someone can give me a hint on this issue. I'm working on U-Boot v2017.11 currently, and just found out that on the Odroid C2 env settings are not changable inside the eMMC, but only at compile time for Uboot. I use an 16GB eMMC, not a sdcard. So my question is: where and to what values have the following CONFIG_* parameters be set to have env settings changeable by setenv and saveenv in Uboot again? #define CONFIG_ENV_SIZE (32 * SZ_1K) #define CONFIG_ENV_OFFSET (720 * SZ_1K) #define CONFIG_SYS_MMC_ENV_DEV 1 #define CONFIG_SYS_MMC_ENV_PART 0 That's what I tried inside the include/config…

Hello to all, I have an OdroidC4 with a Hardkernel HDMI Display VU7Aplus. I installed latest image 22.11 XFCE. I think the display size via display data channel is not properly handled. If a lot of text is to be displayed (see pic with the setting of the locale after first login), the lowest lines disappear. So you have to type in the language/continent/country settings blind, because there is no input prompt to be seen. Even when the GUI desktop starts, there is the same issue. When you open a terminal window, the lower border of the window disappears (see pic). Is there a way to configure the display size manually? I also did …

With my OPi Zero, I noticed that at random times the ethernet connection somehow gets disabled. The only way to recover is by power cycling. I use the device as Pi-Hole (so when ethernet gets disconnected, I don't have internet anymore), print server and UniFi controller. I decided to swap it for my Odroid C2. Odd enough the C2 has the same issue. Maybe someone can help me with this? When powercycled, the Odroid with the latest Armbian (installed two days ago) is all up and running fine. It can connect to the internet, I can SSH into it. The ethernet led is flashing orange, so the gigabit connection is available. However, at rondom times the ethernet led…

Please delete! I just found the problem. __________________________________________________________________________________________________________________________________________ Hi guys, i'm running an Odroid C4 with Armbian Jammy. uname -a Linux Homeserver 6.0.13-meson64 #22.11.2 SMP PREEMPT Sun Dec 18 16:52:19 CET 2022 aarch64 aarch64 aarch64 GNU/Linux Everything works fine so far. Today I just bought an external ssd drive "SanDisk Portable SSD 1TB". I can mount and use it, but the speed seams quit slow to me. The packaging of the ssd say "up to 520MB/s" and the USB 3.0 ports should have higher speed than this: …

I have a 8gb SD card and 64gb eMMC. I want to put Armbian on the SD and use eMMC for high disk usage activities. When using the eMMC it will always boot of that device. You can alter the boot.ini to get it to boot off the SD once it reads the boot information from the eMMC. I installed Odroid Mate on BOTH the eMMC (to get the boot partition created) and the SD I can get it to use the installed OS from the SD card. Original Odroid boot.ini from eMMC: setenv bootargs "root=UUID=74ce0af9-be77-4ebe-9308-c06feb2ecef9 rootwait ro ${condev} no_console_suspend ... # Booting fatload mmc 0:1 ${initrd_loadaddr} uInitrd fatload mmc 0:1 ${loadaddr} Image fatload mmc 0:…

Hello, I am using up to date Armbian Buster. TP-Link TL-WN722N V1 USB WiFi dongle causes system crashes after kernel upgrade to 5.4.12-meson64 #19.11.8 SMP PREEMPT Thu Jan 16 20:12:23 CET 2020 aarch64 GNU/Linux. Before updating the kernel, I had no such problem. Feb 12 20:17:15 xxx systemd[1]: Found device AR9271 802.11n. Feb 12 20:17:15 xxx systemd[1]: Started ifup for wlx54e6fc8d208e. Feb 12 20:17:15 xxx wpa_supplicant[2360]: Successfully initialized wpa_supplicant Feb 12 20:17:15 xxx sh[2344]: wlx54e6fc8d208e=wlx54e6fc8d208e Feb 12 20:17:17 xxx wpa_supplicant[2361]: Using interface wlx54e6fc8d208e with hwaddr 54:e6:fc:8d:20:8e and ssid "mynetwork" Fe…

A few weeks ago, after a firmware-upgrade my C2 bricked. It's blue led didn't flash any more and no serial console was available. Since I had everything setup just right I wanted to recover it using these steps here: https://docs.armbian.com/User-Guide_Recovery/#replacing-boot Off course I replaced the packages with the ones for the C2. Specifically: https://mirrors.dotsrc.org/armbian-apt/pool/main/l/linux-5.9.14-meson64/linux-dtb-current-meson64_20.11.3_arm64.deb https://mirrors.dotsrc.org/armbian-apt/pool/main/l/linux-5.9.14-meson64/linux-image-current-meson64_20.11.3_arm64.deb https://mirrors.dotsrc.org/armbian-apt/pool/main/l/linux-bust…

Hi guys, i have a question regarding the installation method of the two operating systems. On my OrangePI3 I booted the operating system from micro sd card and told armbian bionic that the eMMC memory will only be used as a boot loader while the rootfs of the actual operating system is installed on a connected USB stick. Is it the same with the Armbian Bionic for the Odroid C2 version? Or is it the case that the future operating system is written directly to the eMMC memory and booted from there? And then there was the reminder that Odroid C2 does not boot from USB. . . Can I use it as described for OrangePI3?

Can the c2 RTC be used with armbian?

I have an C2 and an old VU7 (800x480p60hz) https://wiki.odroid.com/accessory/display/vu_series/vu7/vu7#tab__odroid-c2 that I was hoping to use for a mini kiosk. Was able to run the older Hard Kernel supplied images with the uboot boot.ini updates suggested above to change disable auto detect, fix the resolution, and set to DVI rather than HDMI mode. When I loaded the latest Focal image from Armbian when I have the screen switched on then the kernel faults and reboots. ## Flattened Device Tree blob at 04080000 Booting using the fdt blob at 0x4080000 Loading Ramdisk to 7b06a000, end 7bf49d63 ... OK Loading Device Tree to 000000007a…

Hi, I have a Radxa Zero 4+64 GB model SBC. I saw new Xiaomi 4k tv stick and it has Amlogic S905Y4 and it has similar performance to S905Y2. I wonder when radxa zero will get h/w acceleration to use all potential of SoC. If there is already got h/w acceleration support, I'm sorry for writing this questions. I tried radxa debian (official), manjaro and armbian images. All of them not able to play videos smoothly in firefox. Thanks for all replies.

Hello, I have trouble activating i2c on odroid c4. There's a pcf8563 module connected to the board. Also, /dev/i2c-0 /dev/i2c-1 exist. But pcf8563 does not show up when I run i2cdetect. I can rule out hardware issue because both i2c and pcf8563 work well with Hardkernel's Ubuntu image. So far, I've tried the followings but they don't work: Adding overlay="i2cA i2cB" to /boot/armbianEnv.txt and reboot. Manually editing device tree by changing status under "i2c@1d000" to "okay" and reboot. Also, I remember that i2c used to work on older versions of Armbian, which come with older version of kernels. But since linux 5.19, i2c no longer w…

Hello, After upgrade Armbian (4.19.69-meson64) to Armbian Buster with Linux 5.3.11-meson64 warning messages shows up on boot in dmesg: ... [ 1.973932] Key type encrypted registered [ 1.985109] dwc2 c9000000.usb: c9000000.usb supply vusb_d not found, using dummy regulator [ 1.985153] dwc2 c9000000.usb: c9000000.usb supply vusb_a not found, using dummy regulator [ 1.986616] phy phy-c0000000.phy.0: USB ID detect failed! [ 1.986623] phy phy-c0000000.phy.0: phy poweron failed --> -22 [ 1.986643] ------------[ cut here ]------------ [ 1.986700] WARNING: CPU: 3 PID: 68 at drivers/regulator/core.c:2036 _regulator_put+0x34/0xd8 [ 1.986702] Modul…

Hi, I'm getting a random packet loss on the ethernet connection. When pinging, about 6-8% pings are lost, the ssh connection sometimes freezes for a moment. Things I've tried so far: Disabled NetworkManager, added eth0 in /etc/network/interfaces with a static ip4 address Disabled EEE for eth0 Replaced ethernet cable Plugged into different switch None of them made something better. My C1 & C4 with the same Armbian Buster version/release don't have this issue. How to investigate deeper in this issue?

Hi, for the Odrioid C4 eMMC v0.4 modules are available. like Spoiler https://www.pollin.de/p/odroid-32gb-emmc-module-c4-811145 Can I use these v0.4 modules in my Odroid C2, too? I didn't find any information about the compatibility. Thanks in advance! Matt

Hi all, I have some piece of software to compile on our Armbina system (Linux odroidc2 4.19.90-meson64 #5.99 SMP PREEMPT Fri Dec 20 13:47:25 CET 2019 aarch64 GNU/Linux). It is a C++ program, usually running on x86 machines, and has one line of code killing the compilation: asm volatile ("rdtsc" : "=a" (low), "=d" (high)); I need to replace it by some code working with g++ on ARM64. Anyone how can give me a hint? I tried Google, but found no reasonable solution. In case, the software package is public, if you need the link to get it, please let me know. Any help is appreciated. Thanks in advance, Michael

I recently bought a 64 GB eMMC module (chip on orange board) from Ordoid/Hardkernel but u-boot does not recognize the eMMC. What I did: installed the official Armbian_20.11.10_Odroidc2_focal_current_5.9.14.img.xz with Etcher on SD card booted successfully from SD card, eMMC is accessible from within Armbian/Ubuntu executed nand-sata-install to transfer the system to eMMC, which completed without error messages shutdown the system, removed SDcard and restarted it The serial console displayed the following: U-Boot 2020.10-armbian (Jan 05 2021 - 01:40:47 +0100) odroid-c2 …

I am running bookworm on a banana pi m2 zero. It comes up properly and connects to Wifi and to the attached LAN adapter, so I can access it via SSH on both interfaces. BUT, when I disconnect the keyboard, it doesn't boot properly anymore and I cannot connect to it. I attached a monitor to take a look at the startup messages and found that it hangs at starting the hostname service (see screenshot) How can I get it to boot properly?

Using a cable such as this one, can we expect Armbian on the C2 to consistently assign the same serial designation to each cable port? It would be nice but probably not? I found this question and this one but I'm not sure what would be the best approach for my application. I'd like to do it 'The Armbian Way' if there is one. How would you ensure that each hardware device is assigned the same port each time? Thanks .

v-sync is it working or not? I just start up debian xenial x.org with meson drm driver, but it looks like v-sync don't work. Should I change something in x config ? amlogic drivers has always problem problem with v-sync only video decoder pipeline( amlogic magic idea how to do video decoding) is sync-ed properly I opened terminal and I moved it down and can see window from prev. frame so v-sync don't work

I have a second usb network card (chip ax88179) conected to my C4. It randomly crashes and I have to rmmod/modprobe to make it work again : can't be done remotely without network... Looks like this kind of problem is kernel related : any idea ? uname -a Linux gwm 5.8.16-meson64 #20.08.14 SMP PREEMPT Tue Oct 20 22:50:41 CEST 2020 aarch64 GNU/Linux [34120.524606] ------------[ cut here ]------------ [34120.524659] NETDEV WATCHDOG: enx002427fe2bf8 (ax88179_178a): transmit queue 0 timed out [34120.525139] WARNING: CPU: 0 PID: 0 at net/sched/sch_generic.c:442 dev_watchdog+0x300/0x308 [34120.525160] Modules linked in: …

Hi guys, after some interesting weeks, I could successfully install eight Odroid C2 together with dedicated FPGA hardware now, and prepare them now for deep sea operation. Just wanted to express a big "THANK YOU" to all here in the forum which were involved in helping me to get the beast working. The boards operate now with patches inside Uboot (serial console 9600 8N1) and several small patches inside the kernel (device tree, PWM, ADCs, 1Wire), and a patch inside the rt8152 driver to switch off the LEDs in the USB ethernet dongle (PMTs don't like such bright light usually). 128GB eMMCs are working fine, thanks to the speed patch …

Hello, I just received my new Odroid HC4 and wanted to install Armbian on it. I downloaded and decided to use the following image: Armbian_24.2.1_Odroidxu4_jammy_current_6.1.77.img I used two ways to flash the SD card - Balnea echter and also - sudo dd if=Armbian_24.2.1_Odroidxu4_jammy_current_6.1.77.img of=/dev/mmcblk0 As recommended to bypass the bootloader petitboot I followed the recommended procedure: ********************************************************************** Bootloader Bypass Method This is now the preferred method. It is easier, and be performed without a display via SSH Install an SD Card with a fresh Armbian …

Hi! I have buy an used odroid c2 and want to connect it to my tv. I have tried latest desktop image but my tv won't show me nothing so i tried latest Focal Cinnamon image and it is the same. I can log with ssl Here is my arbianmonitor -u result http://ix.io/3ZCA

Hi, just to let you know, I changed from "next" to "current", and found some quirks in the "current" kernel (using "buster"). (1) uart_C is not working (already fixed by martinayotte, thanks for the fast response!) (2) microSD card behaves strange: you can boot from uSD card, that works. When booting from eMMC card, the uSD clot is "dead", card insertation is not recognized anymore, it can't be used. Michael

Hello Guys, i am running an Odroid C2 with the latest Armbian based on debian Bullseye. As disk i am using an 8GB emmc flash drive. For longlive reasons i am thinking about to reduce the read or more important the write access to that drive. I know, that every SD card and also every EMMC flash drive got a certain amount of write access and then its dead... So i am ask you what can i do to reduce read/write: - move logs to external usb? - activate ZRAM? - disable cache...? - tmpfs? I am just at the beginning of this, so kindly let me know if you guys have some well know hints. Thanks JM

Hi, after a very successful deployment last year we will start a new sub sea C2 deployment next year (next to the old installation, in Northern Pacific, down at 2600m). Things work out nicely, but now we reached a state where some help from experts is welcome. I need to include some changes into the filesystem generated by Armbian build system, and hope someone can give me a hint on how to do it best way: - include some packages into the image (list available) - add some files to /etc/udev/rules.d/ - add some lines to /etc/rc.local - have a preinstalled user plus home directory (optional) Any help is appr…

boa noite gostaria de pedir ajuda estou tentando instalar o armbian em placa amlogic s805 e gostaria do arquivo u-boot já pesquisei no forum no site desde já agradeço não obteve sucesso

Hello everyone, I am evaluating the purchase of an SBC (the Radxa Zero seems to be the best equipment, power / consumption) for one of my projects, but I cannot find reliable sources regarding the consumption of the SBCs. Have any of you carried out extensive tests?

lm-sensors can read temps fine - $ uname -a Linux Odroid-C2 4.19.20-meson64 #5.75 SMP PREEMPT Fri Feb 8 10:08:40 CET 2019 aarch64 GNU/Linux $ sensors -u scpi_sensors-isa-0000 Adapter: ISA adapter aml_thermal: temp1_input: 39.000 But htop displays 0 C -

Hi all, I'm new to Linux and trying to set up a music server using my Odroid C2/Armbian/Cantata/MPD/HDMI sound. Got Armbian 5.60 (Stretch) 4.18.8 installed. Cantata sees the small test music library I set up on the C2 and appears to play tracks as the progress bar moves. I get no sound from the C2 connected HDMI monitor. (for initial testing only, i2s + DAC/Amp later). I tried the same set up using the Odroid Ubuntu/Mate desktop image a few days back and it worked straight out of the box. My suspicion is that the audio output settings in the mpd.conf are not correct (mpd 0.19.21). For HDMI sound output, does my version of Armbian use Pul…

Hi There, i´ve tried armbian on my odroid C2, but the sources list is not fully available .. or simply wrong. an : apt-get update ... .... Hit http://httpredir.debian.orgjessie/non-free Sources Fetched 151 kB in 12s (12.3 kB/s) W: Failed to fetch http://apt.armbian.com/dists/jessie/InRelease Unable to find expected entry 'main/binary-arm64/Packages' in Release file (Wrong sources.list entry or malformed file) E: Some index files failed to download. They have been ignored, or old ones used instead. shows, that something is wrong with sources list... regards arel

I just got a mystery box from Ameridroid that contained a ODROID-GO-Ultra. Hardkernel has an old Ubuntu 20.04 image. Does Armibian support this device?

Hi, i had a little problem with root login on C2. It gives a message about "/usr/local/bin/temper" file absent and goes to restart. Problem solved by installation "armhf" architecture (temper file is present but compiled for 32 bit). thank you very much for your work.

After the last "sudo apt upgrade" my odroid C4 (meson) doesn't reboot properly anymore. In the system out there are many lines like: "Begin: Running /scripts/local-block ... mdadm: No arrays found in config file or automatically done." and one : "mdadm: error opening /dev/md?*: No such file or directory mdadm: No arrays found in config file or automatically /scripts/local-block/mdadm: 58: /scripts/local-block/mdadm: rm: not found" at the end: "Gave up waiting for root file system device. Common problems: - Boot args (cat /proc/cmdline) - Check rootdelay= (did the system wait long enough?) - Missing modules (cat /proc/mo…

Hello I'm running debian bullseye on an Odroid C4 since quite some time now and decided it was a good time to upgrade to bookworm. When I first installed armbian on this board, I remember that I had to install the Odroid HC4 image. If I'm not mistaking, there were no C4 image at the time. After upgrading my current bullseye firmware with armbian-config ( and by passing the SSD issue described in this armbian forum post by hot plugging it ), I noticed that /boot/armbianEnv.txt had this line: fdtfile=amlogic/meson-sm1-odroid-hc4.dtb whereas the amlogic/meson-sm1-odroid-c4.dtb file exists in the /boot/dtb directory. Despite having read…

Hi, just returned to start working on a FLIR Lepton camera, with Odroid C4, hooked up to SPI (faster than the C2). WIth the official image from download page (Armbian 22.08 Jammy, kernel 5.10.144) I get the following message on console as soon as I try any access to spidev: [ 77.660325] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 [ 77.666930] Mem abort info: [ 77.670400] ESR = 0x86000004 [ 77.673801] EC = 0x21: IABT (current EL), IL = 32 bits [ 77.677915] SET = 0, FnV = 0 [ 77.681367] EA = 0, S1PTW = 0 [ 77.684796] user pgtable: 4k pages, 48-bit VAs, pgdp=000000000f26b000 [ 77.690454] [00000000…

Hi, I have question about ports /dev/ttyAML1 and /dev/ttyAML2 (device Odroid C2, Image Buster) I dont see in dmesg the ports /dev/ttyAML1 and /dev/ttyAML2 [ 0.000256] printk: console [tty1] enabled [ 1.877506] c81004c0.serial: ttyAML0 at MMIO 0xc81004c0 (irq = 13, base_baud = 1500000) is a meson_uart [ 1.877549] printk: console [ttyAML0] enabled [ 3.452296] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 3.455230] systemd[1]: Created slice system-getty.slice. [ 4.257715] cdc_acm 1-1.4:1.0: ttyACM0: USB ACM device overlays=i2cA i2cB uartA uartB uartC w1-gpio How should i chnage the meson-gxbb-…