Rockchip

For a few Weeks i have little problem with my Nano Pi M4. Whenever I boot up it says: "Loading, please wait...starting version 237" and then i have to wait . Finally it boots up, but there were times this SBC was booting really fast. Is there something i could do, to speed up booting again? Regards

Hi Is it possible to install the system on NMVE M2 ? Or how to completely transfer the SD card OS to NMVEIs it possible to install the system on NMVE M2 ?

Hello all, I am trying to host the rtsp server using gstreamer on armbian. everything is latest and updated. I found, bare rtsp server is taking 3-4% of cpu usage. when I add timestamp and text overlay, cpu goes 23-25%. I was checking if I can enable GPU support, here is output. My system is on NVME, and its working so not sure why error popped. I am connected to wifi, so again not sure why wifi drivers are having issues. however my board never shows it has gpu. can some one guide me ? I have 2 mp camera, not a huge load. again memory is 8GB but never used beyond 1GB, but CPU is most of the time on above 70% dmesg | grep -i error …

Hello everyone, Hello everyone, I have installed Armbian Bookworm 23.11.1 (kernel 5.10.110). The fan control does not work. The fan only runs at level 1. None of the many patches I tried worked. The last one tried was this: https://forum.radxa.com/t/guide-on-how-to-customize-you-pwm-fan-curve/17442 I can adjust the fan manually, but the automatic doesn't work. The "policy" file (/sys/class/thermal/thermal_zone0/policy) cannot be permanently changed to "step wise" (logged in as root). After restarting it is back to "user_space"... The access rights are: -rw-r--r--1 root root 4096 Feb 11 02:42 policy …

Hi, I own a NanoPi M4 and I am wondering how to get the USB OTG working. I would like to set up Ethernet via USB OTG on my NanoPi M4. The only reference I can find is with https://vjordan.info/log/fpga/nanopi-neo-usb-otg-with-armbian-mainline-4x-kernel.html and I want to know if the steps are similar for NanoPi M4.

hi, i have only one fan that spin, i have set the systemctl stop fancontrol and checked the pwm1 the value is 255, and only one who spin i can turn off the only fan spinning with value 0, but i can't control the seconds fan at all, i have verified the connectique on the board and everything is fine, when i opened it and checked without disk , and i saw that both fan was spinning, so i thought it was fine, when i closed the board and disk's are on, i again have the same issue, i can control only 1 fan, it's always the same one. any idea how to fix this issue? is it a software related?

Title. Since apparently the proprietary drivers have better support for both. Thanks in advance.

Hi, I had to change the Rack 1 HDD because I got an email telling me that this disk was broken. So I ordered new discs to make my replacement. When I put my new disk my problem started. For information my old disk was perfectly visible before I changed it and the led was functional too. I have a strange problem and I'm afraid it's hardware. Currently I have Rack 1 (HDD 1) which no longer detects my disks, there are no more LEDs lighting up, we can clearly hear the HDD lighting up, but it is not visible in the CLI and not via the WebUI. Im using OMV 6.x with kernel 5.15.89 (current) stable RAID 6 with 5 x 8To Have try…

Hi All, thanks for this great project, much appreciated! Could someone give me an educated guess whether there is a risk of damaging my board when the blue LED is flashing much faster (at least twice, probably more) than usual? I suspect something is changing the frequency or voltage and I'm not sure how much time I can take in this state to try to analyze the problem further. For now I unplug the power when it happens. I'm trying to netboot my Rock Pi 4B v1.4 with the current or dev branches of buster minimal nfsboot, with no local storage at all (just the SPI flash for u-boot). The legacy 4.4 hangs at very early boot (couldn't get clock / Failed to g…

is it intended to integrate openzfs-2.0.0 and if so, is the timing already known?

Hello all, I have a RockPi 4B in use and wanted to connect my 7" display from Raspberry via the display port. According to these instructions, it should also work. https://wiki.radxa.com/Rockpi4/hardware/display#Raspberry_Pi_7_inch_Touch_Display But unfortunately I can't find this file under "boot" because I'm using an ARMBIAN image. How can I address this 7" display? Can anyone help me here? Best regards from Berlin Z. Matthias

Hi - First let me say how gratefull I am for an Armbian version that works with my NanoPi M4 board! I am using the board as a web server and it is rock solid. My question is about the information that is displayed when I log in to my board using SSH. There is information about cpu temp, up time, etc. How is this information extracted and displayed? I am a Linux noob and I would like to understand how to get the cpu temp and other info to use at other times. Please help me as I am just starting out with SBC's. thanks---jb.

Hello all, I have a question today regarding ARMBIAN - Linux and the configuration of the ZRAM .... Under the ARMBIAN for RockPI 4 I have a ZRAM for the SWAP and a ZRAM for /var/log. Is it possible that I change this configuration and use the eMMC memory for these two areas? Because the big problem with /var/log is that it is simply too small and thus constantly runs into "ERROR" -> volume full. Thank you very much and I am looking forward to constructive contributions to solve my problem. Kind regards

Hello to everyone Trying to use armbian on RockPi 4C plus. Got kernel OOPS. Kernel crushes in different moments: mostly during systemd units starting or just after boot finished. Backtraces are different (no common). Faulty images: 1) From the https://www.armbian.com/rockpi4/ For Model C+ here: https://redirect.armbian.com/rockpi-4cplus https://mirrors.dotsrc.org/armbian-dl/rockpi-4cplus/archive/ Armbian_22.11.1_Rockpi-4cplus_bullseye_current_5.15.80_minimal.img 2) Built by myself Armbian_22.11.2_Rockpi-4cplus_bullseye_current_5.15.84_minimal.img Armbian_23.02.0-trunk_Rockpi-4cplus_bullseye_edge_6.1.8_minimal.img Armbi…

I don't know if this is the right subforum for this question. Would Armbian be possible for the PineTab2?

Hi, I now have the habit to use the status LEDs on my Orange Pi Zero(s), and would like to do the same on my RK3399. The files indicated in this thread don't exist for the version of Armbian I'm using (very recent build by @martinayotte). Spoiler ,g$$$$$$$$$$$$$$$P. OS: Debian 10 buster ,g$$P"" """Y$$.". Kernel: aarch64 Linux 5.6.2-rockchip64 ,$$P' `$$$. Uptime: 54m ',$$P ,ggs. `$$b: Packages: 527 `d$$' ,$P"' . $$$ Shell: bash 5.0.3 $$P d$' , $$P CPU: Unkown @ 6x 1.512GHz [78.7°C] $$: $$. - ,d$$' GPU: rockchipdrmfb…

Hi community, I am experiencing an issue reinstalling Armbian on my Helios64. I tried all methods including booting from an SD card, flashing the image onto the eMMC directly but every time I boot, I get kernel panic (flashing status light). I also can't connect to the USB via TTY to diagnose the issue. My macbook keeps detecting the /dev/tty.usbserial-DT03OEIM and the next second it is gone. I wanted to install the original Buster image but I cannot find it anymore in any of the archives. It's kind of disappointing because what's the purpose of an archive then if not hold on to an image for a few years. My current theories…

Good day, I'm looking for help adding touchscreen support to the ROCKPI 4 Legacy Kernel and correct screen configuration settings. Im new to SBC development so I'm still learning the build system. I have taken the time to track down, what I believe, are the commits to add basic support for the "Raspberry Pi 7" Touchscreen" to the kernel. I believe their will be changes needed to rootfs so that the display manager recognizes it and sets it up properly. ARMBIAN_BUILD_BRANCH: Legacy Kernel --> https://github.com/ayufan-rock64/linux-kernel/tree/release-4.4.202 RADXA_BUILD_BRANCH: Kernel --> https://github.com/radxa/kernel/releases/tag/4.4.154-110-rock…

Hi All, I am on my Helios64 (already have a Helios4). I am running 2 x 8TB, 1x 256 M2, OMV5 debian etc. I have ZFS running (from the wiki instructions) in a basic mirror format, and if I add a few drives I think it would still be a mirror, however I have the following question. It seems far more complicated than MDADM, and potentially more unstable (not in terms of the underlying technology, but in terms of changing these kernals etc every week). Do you think for an average home user that this is really worth it or will constantly need work? To change it would mean starting again, but I do not want to change the setup every month and wo…

This happened out of the blue, without indication of anything else being wrong. I just noticed that NFS stalled, and realized that the server is not on the network. The system on the box was running fine, but there were no lights on the network connector (it is connected with the upper, 1Gb, adapter). I replugged the cable into the 2.5G socket and it went online. Then I powered the box off and on again, with the cable in the 1G socket, and it came online normally. This is what I found in dmesg/syslog: Aug 31 09:31:39 localhost kernel: [379809.423687] NETDEV WATCHDOG: eth0 (rk_gmac-dwmac): transmit queue 0 timed out Aug 31 09:31:39 localhost kernel: [379809.424…

Not sure if this is board-specific, but filing here anyway. After installing armbian from Armbian_23.5.1_Nanopineo3_bookworm_current_6.1.30.img.xz , apt doesn't find the key for the armbian repository. root@nanopi:/tmp# apt update Hit:1 http://deb.debian.org/debian bookworm InRelease Hit:2 http://deb.debian.org/debian bookworm-updates InRelease Hit:3 http://deb.debian.org/debian bookworm-backports InRelease Hit:4 http://security.debian.org bookworm-security InRelease Hit:5 http://fastmirror.pp.ua/armbian bookworm InRelease Err:5 http://fastmirror.pp.ua/armbian bookworm InRelease The following signatures couldn't be verified because the public key is not availa…

Cannot connect to wifi via on-board wifi on Station P1. External USB WiFi controller (rtl88x2bu) works fine on the same board $ cat /boot/extlinux/extlinux.conf label Armbian kernel /boot/Image initrd /boot/uInitrd fdt /boot/dtb/rockchip/rk3399-roc-pc-plus.dtb append root=UUID=d98925da-408f-480e-b729-321ddcdbd2b8 console=ttyS2,1500000 console=tty0 rw no_console_suspend consoleblank=0 fsck.fix=yes fsck.repair=yes net.ifnames=0 bootsplash.bootfile=bootsplash.armbian $ uname -a Linux station-p1 5.15.25-media #22.02.1 SMP PREEMPT Sun Feb 27 09:07:40 UTC 2022 aarch64 GNU/Linux $ journalctl -u NetworkManager ... …

I have a Helios64 that I recently reinstalled/updated to the latest Armbain Jammy image after not updating for quite some time and finding some of the repos to be dead. Without the drives initialized the system seems like it will run for days, but with the drives initialized (ZFS), I will get the below error after a few hours of uptime (~8-10 hours). I have seen some threads saying to set the CPU clock to one speed to fix the issue and some people installing a newer kernel (via beta.armbian.com). If anyone has any thoughts on how I could try and make this more stable I would appreciate it. [477435.475903] rcu: INFO: rcu_preempt self-detected stall on CPU [477…

Hello, i want to use a NRF24L01 on my Rock PI 4B. I found out that i cannot enable spidev0.0 because this is corresponding with the network interface. Linux rockpi 5.4.32-rockchip64 #20.02.11 SMP PREEMPT Tue Apr 14 17:30:19 CEST 2020 aarch64 GNU/Linux Linux version 5.4.32-rockchip64 (root@builder) (gcc version 8.3.0 (GNU Toolchain for the A-profile Architecture 8.3-2019.03 (arm-rel-8.36))) #20.02.11 SMP PREEMPT Tue Apr 14 17:30:19 CEST 2020 My armbianENV looks like this: verbosity=1 overlay_prefix=rockchip overlays=spi-add-cs1 spi-spidev param_spidev_spi_bus=1 rootdev=UUID=3c50a1d1-71a5-4a0f-9899-099b17a1050b rootfstype=ext4 usbstora…

Hi guys , I installed the Buster WIP image on my M4 V2 and it appeared to be functioning ok wifi,USB etc all working until this morning. It wouldn't boot so I connected a serial cable and saw where it failed ( I think it part of the uboot process) ERROR: Did not find a cmdline Flattened Device Tree Any ideas why this should suddenly happen ? I have two V2's running this build and the other is still working fine

I have several orange pi 5B running Armbian Bookworm Cinnamon doing various task and they are working quite well. when i want to check up on a system that was booted without a monitor connected at boot time i get no video output on the HDMI. when reboot with the HDMI connected the HDMI outputs video just fine. Are there any settings i can change so the HDMI will output video if a HDMI monitor is connected it boots with no monitor connected

I have orange pi 3b, that has one NVME ssd. This boots hybrid from SD card and system is on NVME. I tried to make boot it without SSD but no luck as of now. my nvme is fast and supports 5GBS speed. /dev/nvme0n1 /dev/ng0n1 AA250310076 FIKWOT FN955 2TB 0x1 2.00 TB / 2.00 TB 512 B + 0 B X0430P00 Its avg benchmark speed is 415mbps which is very slower than avg. sudo lspci -vv | grep -i "LnkSta" LnkSta: Speed 5GT/s, Width x1 LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete- EqualizationPhase1- LnkSta: Speed 5GT…

Hello. My question is how to get the English version of the play store app on Orange Pi OS (droid). I have the preinstalled beta version of Orange Pi OS (droid). I have set the system language to English, but the play store app is still in Chinese. I would like to take advantage of the wide selection of android apps available. Please help me install an English version of the app store. Thank you.

Hi. I'm new here and have a small issue. Situation is: I'm using the T4 board for an amateur radio repeater controller. The repeater works in an unmanned relay station 10 kilometers from the my home. To have access by remote even if the boot hangs for some reasons (maintenance mode), I have connected the debug uart (ttyS2) to a serial-to-IP adapter to have access anyway. Because the IP adapter cannot set up to 1.5 MBps, I have reduced the speed down to 115 kbps by changing the kernel argument in the boot.cmd from console=ttyS2,1500000 to console=ttyS2,115200. That worked well with the Armbian 5.69 stretch 4.4.167 kernel. Now I have made…

After happily using my helios64 with armbian buster for years I finally dared to upgrade and everything went smoothly. I found instructions somewhere here in this forum and this is what I did. I first commented out /etc/apt/sources.list.d/armbian.list Then I upgraded to bullseye by replacing everything buster with bullseye in /etc/apt/sources.list (I think I also had to change the url to the security repo) Then I did apt-get update && apt full-upgrade and rebooted. Great success! Then the same for bookworm and again great success. Then reenabled the armbian …

After Seeing all that spi nmve boot hype for the other boards and some time left i took the effort to level up the Orange Pi boards because they are the same as the rest it has a rk3399. The Uboot was a mess so i matched it with the kerenel dts a lot and corrected some issues. Dts debug is not the friendliest debug it compiles or not And after some trial and error (a lot ) and finding a spi nor flash wich is supported (or you add one of your own) it costs a esp8266 has 4mb spi flash or a old printer who had a 4mb and 8mb i got a boot from spi so . and with reading the armbian forum i saw 150balbes talked about usb boot and didnt know …

Dear team, On Armbian_25.11.1_Orangepi5-plus_trixie_vendor_6.1.115_minimal.img not possible to boot completely kernel, sytem reboot in infinie loop Bellow is the debug log on tty DDR V1.13 25cee80c4f cym 23/08/11-09:31:58 LPDDR4X, 2112MHz channel[0] BW=16 Col=10 Bk=8 CS0 Row=18 CS1 Row=18 CS=2 Die BW=8 Size=8192MB channel[1] BW=16 Col=10 Bk=8 CS0 Row=18 CS1 Row=18 CS=2 Die BW=8 Size=8192MB channel[2] BW=16 Col=10 Bk=8 CS0 Row=18 CS1 Row=18 CS=2 Die BW=8 Size=8192MB channel[3] BW=16 Col=10 Bk=8 CS0 Row=18 CS1 Row=18 CS=2 Die BW=8 Size=8192MB Manufacturer ID:0xff CH0 RX Vref:28.9%, TX Vref:22.8%,21.8% CH1 RX Vref:27.1%, TX Vref:21.8%,20.8…

HI guys, one guy at my server realized some nvme testing and the write speed results are far below compared to radxa official benchmark that's probably based on legacy kernel. anyone had better benchmarks on write speeds without legacy kernel (so, mainline)

Hi there! I've got 2 of these industrial android boards (s2809-mb-v1.8c) and I've been trying to get armbian running on the. For a while but so far no success. These 2 boards were sold as being tinker boards but I believe that they are EVBs instead. Here are some photos: https://ibb.co/4wTm20s9 https://ibb.co/Z6PfvZCr https://ibb.co/HTFWLKTS I have also managed to find a link to the Chinese seller: https://m.globalsources.com/product/quad-core-board_1195354789f.htm Debug method: UART2 (because they don't have HDMI only LVDS and EDP ports) PMIC: RK808 So far trying to run them on the latest armbian 26 and…

Hello, I was wondering if it is possible to disable both LEDs on this board or, at least, the green (stat) one. Also I was trying to remove wifi completely and I can do: iwconfig wlan0 txpower off ifconfig wlan0 down systemctl disable wpa_supplicant But not sure if it's possible to remove the driver from the OS and what other unnecessary software I can remove. Thank you in advance.

Hi, I was struggling in the Wifi connectivity with following syndromes: 1. Having trouble connecting to 5GHz network by default unless specifying BSSID 2. Will disconnect after a day or so 3. Cannot parse RX packet header properly (and will spamming errors in dmesg) After putting in some efforts, I've found a newer firmware version on GitHub: New Firmware: BCM4356/2 wl0: Apr 18 2017 13:54:43 version 7.35.184.1.r5 (A2 Station/P2P) FWID 01-efd4ca0d Original Firmware: BCM4356/2 wl0: May 14 2014 19:51:52 version 7.35.17 (r477908) FWID 01-2ed3ee81 The NVRAM text file is identical to `brcmfmac4356-sdio-nanopi-m4v2.txt…

Hi, For some reason my Helios64 took a nose dive today, so I hit the reset button and it wouldn't boot up. Plugged in to the serial console and this came out: Spoiler Terminal ready DDR Version 1.24 20191016 In channel 0 CS = 0 MR0=0x18 MR4=0x1 MR5=0x1 MR8=0x10 MR12=0x72 MR14=0x72 MR18=0x0 MR19=0x0 MR24=0x8 MR25=0x0 channel 1 CS = 0 MR0=0x18 MR4=0x2 MR5=0x1 MR8=0x10 MR12=0x72 MR14=0x72 MR18=0x0 MR19=0x0 MR24=0x8 MR25=0x0 channel 0 training pass! channel 1 training pass! change freq to 416MHz 0,1 Channel 0: LPDDR4,416MHz Bus Width=32 Col=10 Bank=8 Row=16 CS=1 Die Bus-Width=16 Size=2048MB Channel 1: LPDDR4,416MHz Bus Width=32 Col=10 Bank=…

Hey there, had anyone any success enabling PWM to control a PoE hat [1]? I tried a few overlays but no luck. ``` rock-3a-worker-1:overlay:# cat /boot/armbianEnv.txt verbosity=1 bootlogo=false overlay_prefix=rk35xx fdtfile=rockchip/rk3568-rock-3a.dtb rootdev=UUID=f0751d3c-c5c2-4ced-a989-772c2ad130a4 rootfstype=ext4 overlays=w1-gpio i2c7 i2c8 extraboardargs=nvme_core.default_ps_max_latency_us=0 usbstoragequirks=0x2537:0x1066:u,0x2537:0x1068:u ``` I also built mraa with the following: ``` IMRAA=ON FTDI4222=OFF BUILDCPP=ON BUILDTESTS=ON BUILDSWIG=ON USBPLAT=ON ONEWIRE=ON INSTALLTOOLS=ON BUILDSWIGPYTHON=…

Hello, I need your expert help to resolve an issue on my newly purchased orange pi 5b. I was able to install armbian xfce desktop os on emmc but am unable to correctly run a purchased csi mipi camera module (OV13850). Attached are some screen grabs, I do see rk3588-ov13850-c1 appear in overlays row of armbianEnv.txt upon toggling the selection in the armbian-config. Cheese application shows message "There was an error playing video from the webcam" upon opening the application (i also installed flatpak cheese as per some comment in a forum to test). I also tested connecting camera on rk3588-ov13850-c3 but face the same issue. Is th…

With nightly (4.20.0) I can't get my NVMe SSD mounted on the T4 anymore. It works with stable (4.4) http://ix.io/1z5S Any hints?

I first made a self-built image for nanopi-r2s and everything is fine. But another self-built image of Nanopi-R2S seems refuse to boot after enabling these configurations: `DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT`, then `DEBUG_INFO_BTF` and `MODULE_ALLOW_BTF_MISMATCH` But the LED on RJ45 blinks, and I can ping the IP that I get from my router DHCP, but SSH connection refused. So I guess it may have booted, but refuse SSH connection. I have no TTL serial connections yet, I'll check it and post the logs here some time later. Can anybody help? How can I enable ssh with? Is it possible to enable it at build stage? Thanks.

The most resent build 24.5.0-trunk.93 does not have comedi drivers included. I tried to build them with the armbian build system, but it is exclude there. How I can change that so that I can include these drivers. I have a bunch of data aquisition system relying on this drivers that I ran with a rockpi 4c+ Any hint appreciate, Thomas

I seem to have hit another problem with my Helios64. It seems that overnight, HDs 4 and 5 disappeared and no longer seem to be powered. I've disconnected all the other drives and tried it with just 4, and it seems to be a power problem as the drive activity light seems to light up for a short while, but not at full prightness. Also I note that SATA 4 and 5 are on a separate power line to the other 3. Anyone seen this before? Is it fixable?

Updated Armbian on Rock64 today, then lightdm stopped working. After peeling the layers it appears to come down to Xorg giving signal 11 "Segmentation fault" /usr/sbin/lightdm --debug [+0.12s] DEBUG: XServer 0: Launching X Server [+0.12s] DEBUG: Launching process 2575: /usr/bin/X -core :0 -seat seat0 -auth /var/run/lightdm/root/:0 -nolisten tcp vt7 -novtswitch [+0.12s] DEBUG: XServer 0: Waiting for ready signal from X server :0 [+0.12s] DEBUG: Acquired bus name org.freedesktop.DisplayManager [+0.13s] DEBUG: Registering seat with bus path /org/freedesktop/DisplayManager/Seat0 …

Hi all. i got Armbian for luckfox, compiled by builder, and also tried downloaded img binaries. but cannot find clear and complete instruction how to write thtat img to eMMC and for SDCard . what tools and steps should be used for get Armbian img boots and works on that board. thanks in advance PS. BigTreetech CB2 same problem - no clear info about flash eMMC and SDCard.

Hi, Ever since updating to kernel version 5.10.60 (#21.08.1), I have been getting these weird kernel error messages. Such error messages pop up constantly when doing certain operations, like: mmc2: running CQE recovery And also some of these: EXT4-fs warning (device mmcblk2p1): ext4_end_bio:349: I/O error 10 writing to inode 256 starting block 968704) As well as these: kernel: print_req_error: 47 callbacks suppressed kernel: blk_update_request: I/O error, dev mmcblk2, sector 7716864 op 0x1:(WRITE) flags 0x4000 phys_seg 8 prio class 0 kernel: Buffer I/O error on device mmcblk2p1, logical block 954373 A…

On Rock64, I use youtube-dl CLI app.to download the video (720p) during my off-peak bandwidth time, and watch with MPV or VLC later in fullscreen (1920x1080). It plays OK, but this drives the temperature up to 89-92 ! This is a monitor of the results: http://davekimble.net/problem.video.replay.txt . I think the dropped frames are because of 25 fps v 60 fps of the monitor. I know it is a lot of work, but any ideas for reducing the workload welcome. Anybody else get this?

I was trying to avoid opening a new instability topic, but this one seems different enough from the others to deserve it's own discussion. A few days ago I applied the 1G fix (pic attached) to the 2.5G port - which was not in use until then, since all my hardware is 1G max. I did this with the intention of using both ports: the 1G port goes to an isolated VLAN that serves VM images to my Proxmox hosts, and the 2.5G interface (running at 1G speed) serves files to the rest of my network. While the fix appears to work and the port is able to communicate at 1G speeds seemingly fine, after changing to this setup I'm experiencing frequent drops in the USB bus, which c…

Has anyone activated the ov13855 camera on Orange Pi 5 (kernel 6.1.x)? If so, can you share your experience?

Hello. I'm trying to get the PWM2 and 3 to work on RockPi E. I made a custom dts to enable PWM2, loaded using armbian-add-overlay: /dts-v1/; /plugin/; / { compatible = "rockchip,rk3328"; fragment@0 { target = <0xffffffff>; __overlay__ { status = "okay"; }; }; __fixups__ { pwm2 = "/fragment@0:target:0"; }; }; But the kernel doesn't boot: Any idea? I already tried to enable uart1 using custom dtbo and it works without problem. I'm testing on Ubuntu Noble Minimal/IoT v24.8.3 for Rockpi E running Armbian Linux 6.6.51-current-rockchip64 …

Hello I would like to know if it is possible to have 2 partions on the emmc. Indeed My emmc have 256go for only the os armbian with OMV (2.5go only used). I would like to have for example a boot partition with size of 50go and an other partition for my data (200go). However when I use armbian-config the full emmc is formated. If a solution exist could you please share with me the solution. Thanks in advance for your support.

I installed Armbian on my R5s Armbian 23.8 Bookworm Kernel 6.5, Size: 479Mb, Release date: Sep 18, 2023 On this version, I find the classical problem : a module I want to build does not build. Reason ? apt says : Coundn’t find any package by glob ‘linux-headers-6.5.3-edge-odroid’ And make creates an error because “build” directory is not found. I can find the linux-headers-6.5.3 : https://cdn.kernel.org/pub/linux/kernel/v6.x/linux-6.5.3.tar.gz But where can I find the odroid version ?

Hi, I have bricked my system by installing the rk3399 legacy multmedia framework. It was installed on emmc. I was able to recover my system by using the P11 jumper to skip the boot on emmc, as explained in the doc, and now my system runs on a SDCard. The problem is, it seems that I cannot access the EMMC anymore -- it does not show up /dev. My intuition is that the P11 jumper disables the EMMC altogether. Am I write and if so, how can I access the EMMC again? I would like to be able to read it again (I had important data, notably unison synchronization files) and reinstall a fresh OS on it. Any help would be welcome!

If you want to build out-of-tree kernel modules, you will need: kernel headers (installed with apt) kernel sources in /usr/src (cloned from git) kernel config (from /proc/config.gz) some preparation of the sources (but you can avoid building it 😉) # Install kernel headers apt install -y linux-headers-legacy-rk35xx # Install kernel source cd /usr/src git clone https://github.com/armbian/linux-rockchip.git ln -nsf linux-rockchip linux-5.10.160-legacy-rk35xx cd linux-rockchip git checkout rk-5.10-rkr6 # Prepare kernel source zcat /proc/config.gz >.config yes | make olddefconfig make prepare modules_prepare cp /usr/src/linux-headers-$…

On my NanoPi R6C I downloaded the Armbian 23.11 Bookworm CLI and booted the machine from the SD card. Then I installed gnome and firefox. Most things works so far, but I get no sound over hdmi (there is no headphone jack). The gnome - settings - sound shows only the dummy device. Youtube videos play ok, but somewhat laggy and with very high processor load (all cores close to 100% on the gnome system monitor).

Video here: https://drive.google.com/file/d/1kv2QVMMgRizKrjZIGVVMYK3QxkswTA9K/view?usp=sharing Hi there, I have the following stack: Model: ROC-RK3588S-PC V12 (Linux) SoC: Rockchip RK3588 GPU: Mali-G610 (Panfrost/Panfork) Kernel: 6.1.0-1025-rockchip OS: Ubuntu 24.04.1 LTS (Joshua-Riek image v2.4.0) Mesa: Panfork 23.0.5 (git221210 — December 2022) Chromium: 114.0.5735.35 (rkmpp7 from jjriek/rockchip-multimedia PPA) Display: HDMI-1, 1920x1080@60Hz The problem: I'm running a kiosk application in Chromium that plays video fullscreen. The display is physically mounted in portrait mode (9:16), so I need to rotate the output 270°. When rotation is applied, a visib…

I was in the middle of assessing which new firmware to use on a set of OrangePi 5 Max, since the future of Joshua Riek's one is uncertain, and after installing the corresponding Armbian release I was welcomed with a notorious message warning me not to use it in production. I understand that it's community maintained, but is it really unsafe to use for production projects? Since Armbian seems to be the most popular distribution I wanted to double check before moving on to the next.

Hello, I tried Armbian_21.02.1_Orangepi4_bionic_current_5.10.12_minimal.img and Armbian_21.02.1_Orangepi4_buster_current_5.10.12.img but these two version the eth0 doesn't work. This is the ifconfig printout Last login: Thu Feb 25 09:07:13 2021 root@orangepi4:~# ifconfig eth0: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500 ether 6e:6d:04:05:d9:8c txqueuelen 1000 (Ethernet) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 0 bytes 0 (0.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 device interrupt 35 lo: flags=73<UP,LOOPBACK,RU…

Hello, I'm new to Armbian and SoC/ARM devices but I've installed Armbian on the device before, however after tinkering around with RKDevTool and installing FriendlyELEC images on it through USB I'm now unable to boot from SD Card. I've done the "EraseAll" procedure under unbricking method https://wiki.friendlyelec.com/wiki/index.php/CM3588#Windows_Users however it didn't help. I've tried two SD Cards and I have no idea what else I can do. Unfortunately I wasn't able to find anything useful on google. The error is: "Gave up waiting for root file system device." "ALERT! UUID=602525b7-ed9f-43f7-91b0-1dc4e67b44bf does not exist. Dropping to a shell!" When…

Hey, Quick question, can I use HDDs that have the pin-3 SATA "power disable" feature with the Kobol NAS, or should I steer completely clear of them?

Hello. So, really sorry to hear that Team Kobol are disbanding. Many thanks to all who worked so hard to put the Helios64 together. I am really pleased with my Helios64, and am grateful for being able to get hold of one of these. Thank you! 🙏 What with one thing an another, I never got hold of a UPS battery; the battery couldn't be shipped with the original shipment, due to restrictions on shipping Li-Ion batteries; and then the additional postage costs for sending the battery seperately were prohibitive for Team Kobol, which I completely understand, so I chose not to pay the extra for the battery. However, it would be really useful for me to build…

I am using rk3588-sd-debian-bookworm-core-6.1-arm64-20250123.img.gz It is excellent asides from lacking NPU support. Before I go down the path of learning kernel compilation and scanning poorly documented Rockchip repositories, has anyone got a current version of Armbian that includes NPU support? If not, is there any good guide to using a cross-compile system and integrating third part drivers?. On a slightly different topic I would prefer to not use fuse file systems and run off the NVME drive directly. Are there any resources on this?

Hi, I'm looking for the headless version of stretch and xenial for the rock 64. I only see the gui versions of strtech and xenial on the website. I got a special download from Igor a couple days ago but it has some strange issues so I was hoping to find a release version to try. Thanks! Mark

Hello! I've recently installed NextCloudPi, which ships Linux 4.4 by default (linux-image-rockchip64 - Linux kernel, version 4.4.159-rockchip64). Is it OK to update to linux-image-arm64? As far as I understood, mainline Linux supports RK3328 chip since version 4.14. Thanks a lot!

After a recent update to non-kernel stuff, my Helios64 will no longer boot. When attempting to, I get this error: [ 32.425508] xhci-hcd xhci-hcd.3.auto: Host halt failed, -110 [ 35.019496] xhci-hcd xhci-hcd.3.auto: Host halt failed, -110 [ 35.020028] xhci-hcd xhci-hcd.3.auto: Host controller not halted, aborting reset. I had been using the eMMC on board to boot with the SD card as a backup, but now neither one is working. Anyone know if there's a way to fix this? Here's more, using verbosity=4 in the armbianEnv.txt. Spoiler DDR Version 1.24 20191016 In channel 0 CS = 0 MR0=0x18 MR4=0x1 MR5=0x1 MR8=0x10 MR12=0x7…

I'm trying to run Armbian on Orange Pi RK3399 board. I have TP50265 permanently shorted to the ground to enable SD card booting. The board starts without any problems with Debian and Ubuntu images downloaded from the manufacturer website, e.g. https://drive.google.com/drive/folders/1wAdkC25BmjMwapWahEEQGTvi-yuwo8Gx after the above, kernel boots and the system starts perfectly. However, when I try the images downloaded from Armbian website (both, based on the old kernel, like https://dl.armbian.com/orangepi-rk3399/archive/Armbian_20.02.1_Orangepi-rk3399_bionic_legacy_4.4.213_desktop.7z and the new ones, like https://dl.armbian…

Hello everyone, I'm trying to add a new custom driver (written in .c) to my Ubuntu system running on an Orange Pi 5 Max with Armbian. Could anyone please assist me with the process? I'd appreciate any guidance or step-by-step instructions. Thank you! P.S. I am new in Linux The driver

I am experiencing an issue where the Intel BE200 Wi-Fi module stops working on the NanoPi R5C after upgrading to the latest Armbian v26.2.1 with newer kernels. The iwlwifi driver fails to initialize the device due to a missing configuration profile. Environment: Board: NanoPi R5C OS Version: Armbian v26.2.1 Wi-Fi Module: Intel BE200 Failing Kernels: v6.19.0-edge-rockchip64, v6.18.10-current-rockchip64 Working Kernel: 6.12.58-current-rockchip64 Actual Behavior & Logs: When booting with v6.18.10-current-rockchip64 or v6.19.0-edge-rockchip64, the Wi-Fi interface does not show up. Checking dmesg reveals the following iwlwifi probe fai…

I have a Rock4 SE Board (or Rock Pi 4 SE) and I'm using the Armbian_23.02.2_Rockpi-4b_bullseye_current_5.15.93 Debian version. (Linux rockpi-4b 5.15.93-rockchip64 #23.02.2 SMP PREEMPT Fri Feb 17 23:48:36 UTC 2023 aarch64 GNU/Linux) I am trying to set up the correct Device Tree Overlay configuration for my intended application. If I use Armbian-config as a tool to demonstrate the issue here. It starts by listing I2C7 and then I2C8. If I go to the Rock4 SE schematic and search for I2C8, it is not even setup as I2C: Then where is I2C6, for example. It's supposed to be there. If I then look fu…

hi all. I recently updated my Kurnel and rebooted my Helios64. when it loaded in to OMV i noticed my raid drive is missing. i can still see the disks just not the raid drive . Checking on the array i can see it failed with an error 524. Would love some suggestions on how to repair the array. below is the details i was able to get,.. sorry for the large info dump root@helios64:~# mdadm --run /dev/md0 mdadm: failed to start array /dev/md0: Unknown error 524 root@helios64:~# mdadm -D /dev/md0 /dev/md0: Version : 1.2 Creation Time : Mon Dec 14 16:49:07 2020 Raid Level : raid0 Raid …

Hello, When choosing Boot from eMMC - system on SATA, USB or NVMe in armbian-install using the Armbian 24.8.3 Bookworm Minimal / IOT, Kernel: 6.1.75, Release date: Sep 14, 2024 image on my NanoPi R6C, I get the following error: The wird device name is also mentioned on the two preceeding dialogs ("it is highly recommended to wipe all partitions" and "this will wipe all data"). I took a look at the argmbian-install script and the check_partitions routine seems to assume that $diskcheck contains something that, when prefixed with /dev, can be used in the of parameter of the dd command. It is computed as root_uuid=$(sed…

Downloaded Armbian_community_25.2.0-trunk.110_Tinkerboard-2_bookworm_current_6.6.63_minimal.img.xz from GitHub. Burned with Balena. Filesystem is different from what I'm expecting. But it's Rockchip so I don't know what to expect. I'm used to Asus Tinker 2 Bullseye's 8 or 9 partitions. Plug it in. Doesn't boot. I'm able to see the root fs so I know it's there. What am I doing wrong?

Hello. I'm using a NanoPi M4V2 with 4GB of LPDDR4. Before installing Armbian, I tried FriendlyElec and the total amount of 4GB of RAM was detected. When moving to Armbian Buster with kernel 5.9.14-rockchip64, the system is detecting only 2GB of RAM (MemTotal: 1964780 kB). I searched the forum to see if anyone else was having this problem but strangely I found no more reports of this issue. I also tried Armbian Focal, but the problem remains. Thank you.

Hi all, For most Nanopi devices there are packages in the registry which contain the u-boot files, for example: https://mirrors.dotsrc.org/armbian-apt/pool/main/l/linux-u-boot-nanopi-r4s-current/ Is there a reason these packages aren't present for the Nanopi R6S? The reason behind this question is that I used to extract the u-boot from these packages to experiment with other OS'es which have no official release for a certain device. Of course I can get the u-boot from the downloadable images its first couple bytes, but downloading just the package is way smaller. If there is another source to obtain the u-boot blobs I am all ears. …

I have been using a Rock Pi 4C Plus (v1.2) with M.2 slot with Armbian for some time. I boot from eMMC, but have a 500GB NVME device Cannot recall the original version of firmware installed, but it was originally a Debian bullseye image and I re-installed when a bookworm image became available. I regularly use "apt update" followed by "apt upgrade" to keep the software up to date. After a recent update the system went into a boot loop. I attempted to recover by creating an SD card with the latest Armbian image. When trying to debug the issue I noticed that the NVME in the M.2 slot is no longer recognized. Reverting to previously available 23.11 image and the NVME …

Hi My problem is that armbian 6.0.7 kernel hasn't recognised my 28" samsung 4k monitor.It recognised like a 29" monitor.How can I fix this problem? and in 4k resolution right of the screen doesn't show properly.In this side of the screen is completely white. Another problem is that 4k video plays very slowly How can I fix this problem? Thank you for your answers!

What Works: - USB2 and USB3 - PCIe2 - GMAC - eMMC on HS200 mode - Cpufreq - User and maskrom buttons Dmesg Output: https://paste.armbian.com/onelomofit You can download them from Rolling releases section on https://www.armbian.com/nanopi-r6s/ page. Images include devicetrees for R6S and R6C. If you have R6C, you must change the devicetree from armbianEnv.txt.

When using the "boot from SD install to NVMe" option of armbian-config it offered the option to format the NVMe drive with btrfs. When I selected that option, it briefly flashed an error about the partition being too small (even though I had created a 120GB partition). The actual problem appears to have been that btrfs-progs was not installed. After installing that package and rerunning armbian-config it was possible to btrfs format and install successfully. I suggest the error message could be improved. Armbian_22.11.1_Rockpi-4cplus_jammy_current_5.15.80_minimal.img.xz

Hi everyone, i am using NanoPi R6C which is + integrated with a Rockchip RK3588S + running Armbian_23.2.7_Nanopi-r6s_jammy_legacy_5.10.110 image I need to use 3 UARTs (UART1, UART4, UART5) on this board but don't know how to do, can anyone give me some guides please, i have tried armbian-config but in "Hardware" there is no NanoPi R6C option

Hello, I'm currently having trouble getting Kodi to run smoothly on my RADXA RockPi 5B. Despite having set up Kodi multiple times before, I'm facing some challenges this time around. Here's what I've done so far: Installed the Armbian_community_24.5.0-trunk.168_Rock-5b_jammy_vendor_6.1.43_gnome_desktop.img.xz image onto a micro SD card for my RockPi 5B. Followed the instructions provided on the Armbian website for the RockPi 5B (https://www.armbian.com/rock-5b/). While Armbian boots up fine and I can start Kodi, I encounter a few issues: - The screen resolution is initially incorrect when Kodi starts up. To fix this, I have to navi…

The initial installation went fine from the flashed image on SD card, and still works fine. However, after using armbian-config to attempt to transfer the OS and bootloader to the eMMC card, nothing actually changes. It says it formats the card and then goes through the process of transferring the files, or at least it looks like it does. But when I reboot it it's still running on the SD card and no files appear to have been transferred to the eMMC. fstab lists the UUID of the SD card and not the eMMC at all; this is also true of the bootenv section of armbian-config. One thing I did notice is that there are some new directories under /mnt : '/mnt/nand-sata-in…

About a year ago, I installed the OpenMediaVault image for CM3588-NAS from here: https://www.armbian.com/nanopc-cm3588-nas/ The image is debian-bookworm, which has since become oldstable, while trixie is the new stable. Is it possible to upgrade the distribution and move to trixie packages, even though there are no trixie images for CM3588-NAS? In theory this seems completely feasible as my apt configurations seem completely standard with something like deb http://deb.debian.org/debian bookworm main contrib non-free non-free-firmware and deb [signed-by=/usr/share/keyrings/armbian.gpg] http://apt.armbian.com bookworm main bookworm-utils bookworm-deskt…

I've been playing around with the 3d hardware acceleration on jammy, so I can use KODI without stuttering. And that works fine although the KODI version is a bit outdated. So I installed it doing this, under root: add-apt-repository ppa:liujianfeng1994/panfork-mesa add-apt-repository ppa:liujianfeng1994/rockchip-multimedia apt update apt dist-upgrade apt install mali-g610-firmware rockchip-multimedia-config but how do I revert: apt purge --yes mali-g610-firmware rockchip-multimedia-config apt autoremove --yes apt dist-upgrade --yes add-apt-repository --yes --remove ppa:liujianfeng1994/panfork-mesa add-apt-repository --yes --r…

Greetings, I can't seem to find any documentation on how to access the only PWM port on the Nano M4 which happens to reside on the 2nd set of pins. It's listed as GPIO2 and the PWM pin is pin 23 which they label as GPIO_C6/PWM1(3V). SInce any documentation I find on GPIO has to do with the 40 pin port, how can I program the PWM using wiringPI-Python? I wonder why Nano chose to disregard the other PWM pins that other Raspberry Pi type boards retained like the Asus Tinkerboard. Or am I missing something? If so, can someone enlighten me as to how to access PWM on the Nano M4. Preferably using Python 3.

I'm setting up a NanoPC T4 as a network server running OpenMediaVault. I wasn't sure where to post this and I thought I'd start here. I'm replacing an existing BananaPi and I have it and the T4 up at the same time. I've used the BananaPi to stream video files to Raspberry Pi clients running Kodi. The BananaPi has been working well with an older version of Linux and OpenMediaVault. What's happening is video served from the T4 starts playing well but then stops shortly after playback has started. The same video file works well on the BananaPi. I've tried placing the file on an NVMe M.2 drive as well as USB 3.0 and USB 2.0 connected hard disks. I've tried …

Hiya, Are the mirrors out of sync? or did I break something E: Failed to fetch http://deb.debian.org/debian/dists/bookworm-backports/non-free-firmware/binary-arm64/by-hash/SHA256/bc6dc27f7f88e60504fae9d9271e4dabaaa76b8a3a35ac6ec579e24d01d0ea16 E: Failed to fetch http://fi.mirror.armbian.de/beta/dists/bookworm/main/by-hash/SHA512/31775333c7d89a377fd3d2aac261ef684faeaba308fcf85b3c9ddc7f4f4a61712f5e398bc3b23464fd77d3eabd2b86e92b5dcc8dc2e44a27926f546708418c1a Hash Sum mismatch Hashes of expected file: - Filesize:5041046 [weak] - SHA512:31775333c7d89a377fd3d2aac261ef684faeaba308fcf85b3c9ddc7f4f4a61712f5e398bc3b23464fd77d3eabd2b86e92b5dcc8dc…

Hello to everybody ! I'm new to this forum and to linux. After installing my Helios64 recently, I had a few problems and had to go with the eMMC maskrom installation which were fine. PS : I've installed on top of the linux kernel (4.4) Open Media Vault (latest version). After installing everything, I've noticed that the fans were not functioning. I've checked the documentation on kobol.io site and went to the /etc/fancontrol config file and set the values as it was shown on the doc. I've restarted the fancontrol service, but still nothing. I've tried to read the pwm of my fans (has fan P7 were linked to the hwmon0 : cat /sys/class/…

I have forgotten my user password. How to reset it? I have pressed SHIFT (LEFT, RIGHT) during many system boots but GNU GRUB has not been displayed even once. Therefore this instructions don't help me: https://www.youtube.com/watch?v=H9jjm81-nFg

Good evening, I have a Rock64/4G board and just downloaded and installed the Armbian_5.42_Rock64_Debian_stretch_default_4.4.124_desktop.7z to the SD card. After the reboot I saw X11 login interface and everything was great. After that I installed the latest packages with an apt update and then apt upgrade and restarted. Now I only see "rock64 login:" on the screen. The Xorg.0.log I have attached looks actually quite good. Xorg.0.log

Hello everyone! I will teach you how to install WiringOP on Armbian. It's not the most practical method, but it works. First, we download the repository from the original website. $ apt-get update $ apt-get install -y git $ git clone https://github.com/orangepi-xunlong/wiringOP.git Then, we proceed to look for the name of our board that is associated with Armbian. $ cat /etc/armbian-release | grep "BOARD=" | awk -F'=' '{print $2}' The previous command will give us the name of the board, which is the following: root@armbian:~# cat /etc/armbian-release | grep "BOARD=" | awk -F'=' '{print $2}' orangepi-r1plus-lts Now, we pro…

I didn't know where to put this, but there is no forum for Orange Pi 5 Pro?

Has anyone managed to get Armbian on Orange Pi 5(b) output audio through the 3.5mm jack? The device seems to be recognised, but even after fiddling with everything imaginable through alsamixer, with speaker-test running in the background, I am unable to actually get any sound out. HDMI audio works without any problems. ChatGPT thinks it has something to do with GPIO routings not being properly set up. I'm running Armbian 25.2.3 noble (through `apt-get dist-upgrade`; I had to first install an older version from the archives to avoid bricking when installing on the eMMC). $ aplay -l **** List of PLAYBACK Hardware Devices **** c…

RockPi 4 Model C support will come in the near future?

Hi, I'm struggling to get some sound through a PCM5102a module connected to GPIOs. I guess I've to make a dts-overlay to enable it on i2s0 but I didn't succeed, I'm very new to that. Could anyone tell me how to achieve that ? Many thanks for your work !

I have a new nanopi m4v2 and I downloaded the latest focal version today Armbian_20.08.1_Nanopim4v2_focal_current_5.8.6_desktop.img.xz Boots with uboot successfully, but after showing the message "Starting kernel ...", serial is blank. Green SYS LED glows couple of times and then both LEDs are off. I assume the system has powered off as there are no more signs of being up. I am using the usbttl from friendly elec and a samsung EVO 32G microsd. I am attaching the last uboot logs until "start kernel ..." msg Any clue as to why the board is not booting? m4v2_uboot_log.txt

Hi folks I'm running a fresh install of the Debian branch with 5.X Kernel branch. I got 2 new 4TB HD setup with MDAM in RAID 1 mode to store my photo and documents with Syncloud also running on the HELIOS64. I Got also a 2,5 Sata drive mount and share via Samba to my home network. My Helios64 is plugged via the 2,5GB Ethernet port directly to my Router on the 2,5GB port. I didn't fix the hardware bug, but if I understood it's not necessary in my case ( 2,5GB Ethernet on a 2,5GB Ethernet Router) My problem is that on the same router I got an Apple TV (on ethernet port too) with Infuse app on IT. And there is the problem I got big…

Hey, Was able to bring up a pretty smooth armbian installation for a lightweight desktop. Tips for others: Underclock Memory for stability cat /etc/rc.local #!/bin/sh echo 1560000000 > /sys/devices/platform/dmc/devfreq/dmc/max_freq For bluetooth blacklist the following modules: blacklist pgdrv blacklist btusb blacklist btrtl blacklist btbcm blacklist btintel NVME boot, use armbian-installer, but I had to manually change the firmware to this one: https://wiki.radxa.com/Rock5/install/spi#Simple_method to get NVME boot to work For GPU acceleration install panfrost. (See rock5b ambian page) To get my wid…

I have Rockpi 4b v1.4 and Armbian 20.05, kernel 5.4.49, installed and booted from NVME drive. For last months survived all minor Armbian updates, but after upgrading to 20.08 ( to kernel 5.8.10) board doesn't want boot. Steps to reproduce: 1.1 get Armbian_20.05.3_Rockpi-4b_buster_current_5.4.45.img.xz and write it to EMMC. 1.2 Boot board from EMMC, apt-get update, apt-get upgrade. Kernel upgrades from 5.4.49 to 5.8.12 1.3 Reboot. Board reboots fine. 2.1 get Armbian_20.05.3_Rockpi-4b_buster_current_5.4.45.img.xz and write it to NVME drive. Add fdtfile=rockchip/rk3399-rock-pi-4.dtb and overlays=pcie-gen2 to armbianEnv.txt. …

My OPI will turn on but it shows android os via hdmi. I don't have a micro SD card and would like to install bullseye via usb instead. i've attempted ssh into the OPI via wifi and direct usb connect, but it denies the connection. I have the OPI on wifi and can see it on my network. i've tried using android adb to no use. is there a way to install armbian WITHOUT using a micro SD at all?

I had some troubles with the latest build (Armbian_23.05.0-trunk_Orangepi5_lunar_legacy_5.10.110). First I had to restore the 5b specific device tree (rk3588s-orangepi-5b.dts) because with the modified rk3588s-orangepi-5.dts the Wi-Fi and the eMMC doesn't work. So far everything works fine with the exception of the bluetooth. After each boot I have to manually attach it: hciattach /dev/ttyS9 any ...otherwise the hci_uart module is not loaded and no hci device is available. Once attached the bluetooth works fine and I can pair my mouse with it, but not my bluetooth keyboard?!? Seems like the adapter doesn't even detect the keyboard. W…