Beginners

Using a Realtek 8821CU Bluetooth + Wifi USB adapter. Working fine on stable build jammy with kernel 5.10.123. (current) Using the Armbian->Config->System->Other and selecting the latest 5.15 kernel. System reboots and confirm kernel has been updated and chosen. Wifi hotspots are all seen but fails to connect and repeatedly asks for password. Security is WAP2 personal. Setting the kernel back to 5.10.current reverts to Wifi working as expected. I will try the 5.17 kernel and report back. I have seen this before on other Deb distros. From memory this is caused by a missing/outdated kernel e…

I have a board(nanopi r4s with rk3399 and 4g ram) and I want to run a minecraft server on it. (with adoptopenjdk arm64) After flashing the SD image I have the following problems: I can't find the IP address of my board through the IP finding tool. (unable to ssh to my system) # This happened on many OSes, including Debian OS in my VM $ ls ./ . .. java (many other files) $ ./java bash: ./java: No such file or directory Something must went wrong... How to plug the network cable? There are 2 ETH ports on the board. The first one has a "WAN" on it. Another one has a "LAN" on it. (scroll down) …

Hi I installed the official release on my Z83 mini PC and it boots up great, but when I go to install to the emmc it fails at the U-Boot generation step with the error below. Has anyone seen this before or know a workaround? I did check to see if this was just a red herring error but as the error says the bootloader does not get written. "Error while creating U-Boot loader image with mkimage" "Error: no u-boot package found, exiting." Thank you in advance for any help.

Hi All, I am a total newbie in orange pi and ambian. I just want to use orange pi one as my pi hole server. i use sandisk ultra pro 32G a a huawei 2A power block using usb to barrel connector. After my first install, and try to ssh, the port 22 timed out in armbian I also tried reflashing to debian, and still cannot ssh. I already tried some suggestion i found like dpkg-reconfigure openssh-server, changing time out of ssh. i tried armbianmonitor -u, but im getting a Network/Firewall problem detected. you think this might be related to ssh connection. thanks!

I have tried many Armbian images with my orange zero 2 but the best I get is the Armbian logo. Can anyone tell me if there is something else does need to be done? With the images from the orangepi page the board works fine, so is not the hardware apparently. Thanks.

I try to communicate nextion display with Orange pi lite, I can receive data from the display, but can’t send it using WiringSerial library. if I use common file write(), and try to catch an error by errno.h, it gives me: value of errno 14 error printed by errno: bad address.

I've been having a recent issue over the last couple months where my ArmbianEvn.txt file is being overwritten thus causing Helios to hang in the boot process. Using some samples i've found on these forums, I was able to re-create my file and get the Helios back up and running and have since stored a copy so that when it happens, I can just copy and paste and back up running in no time. To date, i've had this happen to me 4 times. I'm not worried about having go through this at this point in time, but I was curious if anyone else has seen this issue or not? I've saved a couple samples of what was written into the ArmbianEnv.txt file: /var/log/armbian-ha…

Hello, I am interested in armbian for OPi 4 LTS Are there any documentation on how can I add support for this board? I'va seen that OPi 3 LTS was added recently (in beta?) Maybe I can do the simular as the only change is bt/wf and cpu/gpu Regards

Hi All We are having a problem where on booting the /var/log is filled and uses all mmc storage space. Does anyone know how to intervene in te booting process to stop this mapping and filling up of the fs? This issue sometimes causes the device to fail to boot properly and remain inaccessible. (It may indeed be that an unclean shutdown is causing this problem). Booting up properly is essential for us and we do not want or need these logs . We send the logs over the server, so capture these anyways. This posting refers to our same issue: Any help much appreciated. Thank you for Armbian! Best wishes Eric

Hello, Just wondering how this build compares to XanMod for performance related features under an AMD CPU? Thank you.

I just (several days ago) installed Armbian 22.05 OdroidN2 Jammy XFCE. It uses kernel 5.10. Then I noticed there is an alternative version 22.05 jammy XFCE with kernel 5.17. Is it possible to update to the later kernel from the image I used without re-imaging and starting from scratch? I have already installed and setup a lot of other applications and data. I can see i have packages linux-image-current-meson64/jammy (linux-dtb... & linux-headers...) installed. On apt.armbian.com I found: (https://stpete-mirror.armbian.com/apt/pool/main/l/linux-5.17.5-meson64/) in the linux-5.17.5-meson64 Name Last modified P…

I tried to execute `sudo armbianmonitor -v` and I got this result. ``` Starting package integrity check. This might take some time. Be patient please... It appears you may have corrupt packages. This is usually a symptom of filesystem corruption caused by SD cards or eMMC dying or burning the OS image to the installation media went wrong. The following changes from packaged state files were detected: /usr/lib/chromium-browser/master_preferences.dpkg-dist ``` This is from new orangepi pc board and new SD Card with new install OS.

I see a lot of tutorials online and they all have seems to have different ways of going about making a share and it seems most of them are logged into a user as opposed to root. I'm logged in to root through ssh so that might the the cause of many of my issues I believe. I did a simple apt install samba and it seems to be running fine. I see other tutorials recommending you install "smbclient" and "cifs-utils", is that necessary? Some of the tutorials also say to add user groups and to add settings to the firewall. I'm just using 1 user and don't have any firewalls installed, unless armbian comes with one by default. I think my my service is running fine thoug…

rock@rock-3a:~$ dmesg |grep spi [ 6.279244] spi-nor spi4.0: unrecognized JEDEC id bytes: 00 00 00 00 00 00 [ 6.279275] spi-nor: probe of spi4.0 failed with error -2 the armbianEnv is as below. verbosity=1 bootlogo=false extraargs=systemd.unified_cgroup_hierarchy=0 overlay_prefix=rk35xx fdtfile=rockchip/rk3568-rock-3a.dtb rootdev=UUID=6359cdcb-b9a7-4930-9257-30f4e34b0a4f rootfstype=ext4 overlays=spi-spidev param_spidev_spi_bus=0 param_spidev_spi_cs=0 param_spidev_max_freq=40000000 Is there anyone know which version is ok for Rock 3a or rock p;i 4b?

I would like to permanently change at start up the UART permissions of /dev/ttyAML0 to give user, read write permissions always. I can do this with the usual "chmod" command but this gets reset after every boot and sometimes also during normal operations. Can somebody direct me to how this can be done please? xuraax

I've installed the OPI 4 image awhile ago for my PI as that was the only one available. I've since installed just the kernel targeting this model. Is there a way I can ensure future kernel updates will look for the lts model? Thank you. (Also the topic tags are missing the 4lts model as of this moment)

Odroid N2. Armbian Ubuntu 22.04 kernel 5.10.123. xfce. Bluman 2.2.4 Adapter is Realtek rtl8821CU Wifi/Bluetooth. Drivers were present. Device Sony SRS-X2. The device is seen when searching but fails to pair. The only message is "bluetooth pairing failed." and "br-connection-already-connected" I'm note sure by what already connected means. It definitely is not connected.

Hey, So basically as the title says. If i install the CLI version of armbian on the OPI 3 lts it works fine for a while but than randomly starts locking up and saying (Look attached image) I don't know why this is happening. Ive also tried the one with a desktop and i didn't seem to get that error ever?

I am not shure if this is board specific so I post it here and hope that you might be willing to try this on your board: - I installed audit: apt install auditd - I set up a rule for a file audit should watch: auditctl -w /boot/armbianEnv.txt -p wa - I change or touch the file being watched: touch /boot/armbianEnv.txt - I have a look at the log of audit: cat /var/log/audit/audit.log And then ––– I see nothing... Any hints what's going wrong? My guess is that the kernel might be lacking the audit module?!

Good morning, I've got a Libre Computer Renegade, with Amrbian Bullseye minimal (on an sd card) . Changing HDMI monitors (of different sizes and resolutions) the board does not adjust automatically the resolution, so, sometimes the display is unreadable because written are too small, and I can't set a resolution to beng able to use it. Surfing armbian docs, it seems to be an environment problems that could be solved by chanching u-boot parameters. I tried to enter in u-boot command shell but I can't. Pushing backspace while it is booting make no effect (tried also with serial console but it didn't work). How can I enter in u-boot environment to set an …

Hi. I have an Orange PI Zero 2 It displays fine on a normal TV through HDMI but on the waveshare there is no display at all. The waveshare display works fine on the HDMI output of my Windows PC. I have chased my tail for 2 weeks looking for a solution but can't get it to work. If you can please point me in the right direction I would really appreciate it. https://www.waveshare.com/wiki/4inch_HDMI_LCD Thank You

Hello... after last update, I'm got this issue .. MAC address for wifi changed after reboot ... (and dhcp reservation does not work .. of course) It happen on all 5.15.x 5.16.x kernels .. Armbian 22.02.1 with Linux 5.16.11-sunxi - has problem Armbian 22.02.1 with Linux 5.15.25-sunxi - has problem downgrade to 5.10 works Armbian 22.02.1 with Linux 5.10.60-sunxi - Is OK .. Have anybody same problem ..?? is any way, how can I solve this issue ..? thanks ... for answer(s)...

Hi folks, This is a bit strange. One core is constantly at 100% on a firefly-rk3399 board. It seems to be because of some emmc issues according to this output. journalctl -f Spoiler journalctl -f -- Logs begin at Sun 2020-11-22 09:23:31 UTC. -- Nov 22 09:24:55 firefly-rk3399 systemd[1]: Reached target Graphical Interface. Nov 22 09:24:55 firefly-rk3399 systemd[1]: Starting Update UTMP about System Runlevel Changes... Nov 22 09:24:55 firefly-rk3399 systemd[1]: systemd-update-utmp-runlevel.service: Succeeded. Nov 22 09:24:55 firefly-rk3399 systemd[1]: Started Update UTMP about System …

I've tried the latest CLI and GUI images. I tried different microSD cards but the result is the same. Both images get to Booting using the fdt blob and never progress. Is there anything I can try to get this working?

Hardware: RPi4B Image: Armbian_22.05.1_Rpi4b_jammy_current_5.15.36.img.xz armbian-config does not show "Hardware" option under "System". I used the best SDcard I have. The PSU works for everything I've plugged it into. I re-flashed the SDcard several times. And I tried some ways that I googled and some postings here. All to no avail. Any help would be much appreciated.

Hello, I get these errors when I try to "apt-get upgrade" Err:1 http://mirrors.xtom.de/armbian bullseye/main armhf linux-dtb-current-sunxi armhf 22.05.3 404 Not Found [IP: 2a09:0:8::14 80] E: Failed to fetch http://mirrors.xtom.de/armbian/pool/main/l/linux-5.15.48-sunxi/linux-dtb-current-sunxi_22.05.3_armhf.deb 404 Not Found [IP: 2a09:0:8::14 80] E: Unable to fetch some archives, maybe run apt-get update or try with --fix-missing? Is Orange Pi PC still supported by Armbian? Btw I'm using "Armbian 22.02.2 Bullseye" Thank you, Regards, dhr

nmcli states eth0 is connected on 192.168.1.10 but putty times out with 'connection refused'. Relevant screenshots attached. Many thanks in advance for any help Joe

Here it is specified as required but is not made clear how to obtain or set it. Specifically, how is it different from 'address' line? Thanks so much Joe

Hello, I'm running Armbian on a Orange pi one. In htop I found out that the CPU temperature is not correct. So I tried to figure out what happens. The CPU is define not as hot as the value says. For me it looks line that the factor is about 2. I just wanted to inform about it. I can also deliver more information if required and also support to debug... I started the following commands for verification. $ cat /sys/devices/virtual/thermal/thermal_zone0/temp 63809 $ armbianmonitor -m Running unprivileged. CPU frequency will not be displayed. Stop monitoring using [ctr…

Does anybody know who to inform to get them to update the certificate on this repository? https://xogium.performanceservers.nl/apt/

I followed instructions here to expose Jupyter notebook over LAN , which had previously worked on Raspbian. However, on Armbian the browser returns ERR_CONNECTION_TIMED_OUT. The client is win11. To the best of my knowledge, no firewall (iptables or nftables) is installed. Many thanks for any help Joe ETA: local loopback via lynx (at given IP, not localhost) connects without error

I reflashed the sd after some issues and while firstrun script connected me to service provider wifi without error, the ethernet (currently connected to win11 enterprise) doesn't get an IP. Does windoze need to act as DHCP server? If so, will it clobber the wifi? Conversely, if I set the Pi as DHCP server for strategic reasons, will it clobber Windoze wifi connection? Thanks so much Joe

Not that I ever got this working correctly on Raspbian, but how do I go about requiring a password for sudo? I am able to change the password via 'sudo passwd' without error, but I still don't know how to make the system request the password every time I sudo. Thanks so much Joe

I am not able install and boot ARMBIAN on an Orange Pi 3 LTS I am new to Orange Pi and only have basic experience as a Linux user. / I downloaded this image file from Armian website :-I Armbian_22.05.1_Orangepi3_bullseye_current_5.15.43.img.xz / Formated a Scandisk 32GB A1 card using SDcardformatterv5 / Used usbimager_1.0.8_wo-i686-win-gdi to write the image to the card Problem: I repeated thew procedure above 3 times but OS doesn't install, This is the log I get on the screen.. (unable to send screenshot - error 200), but the last lines are as fgollows:' "Gave up waiting for root file system device. Common problems…

Hi, after upgrade to armbian bullseye AirPrint on odroid HC2 from iPhone/ipad stopped works. I share old HP Printer on cups - on previously version of armbian works everything well. Cups is accessible, testpage works, but iPhone does not see any printer i have tried. I can not know where start to find a solution sorry for my english

I noticed that TOP an HTOP are in disagreement about many things while my LCD Info panel and TOP are on the same page... TOP OUTPUT top - 23:50:26 up 5:18, 2 users, load average: 1.69, 1.77, 1.72 Tasks: 226 total, 1 running, 225 sleeping, 0 stopped, 0 zombie %Cpu(s): 0.6 us, 0.7 sy, 0.0 ni, 84.5 id, 13.4 wa, 0.1 hi, 0.7 si, 0.0 st MiB Mem : 3785.8 total, 135.1 free, 2551.9 used, 1098.8 buff/cache MiB Swap: 1892.9 total, 1891.4 free, 1.5 used. 1139.1 avail Mem HTOP OUTPUT 1[||||||| 7.9%] Hostname: odroidhc4 2[|||| 4.0%] Tasks: 45, 13 thr; 1 running 3[||| …

Ok folks... This very setup was fixed and made working at my job. I tested from the new M$ Terminal while connected to the LAN of my office, extremely satisfied I returned to home and when I connected the HC4 to my router, the "systemd smbd.service" didn't work again (event though at my workplace I rebooted for testing purpose the board several time and Samba had been woking all the time). The Office LAN is most likely managed by a Win Server and is on 192.160.0.X, at home I am connected to a Comcast Cable Router on 10.0.0.X... This the error I get from systemd: × smbd.service - Samba SMB Daemon Loaded: loaded (/lib/systemd/sy…

Dear Friends, I have been testing Armbian 22.04 Current CLI version and 22.01 Edge Jammy CLI and both does not reboot. When I reboot Armbian the LEDs stop to blinking but I can clearly listen the rust-drives spinning, also the LCD is still active. Initially I though it was because the software that handles the LCD but I made a test without it and it was the same. I also thought that was because the spin drives, but when I did the test I made it without the disks as well, therefore I excluded both cases. Since I didn't read anything about it, I think this issue is affecting just me, any idea where I may look to find out what …

hello armbian developers recently i have tried to built my own kernel from linus' kernel tree(5.18.1). the build config i use cames from armbian 22.05 bullseye(5.15.43-sunxi) /boot/config-5.15.43-sunxi ,without any changes. the kernel was ok to boot,so i plan to add xr819 support for it，but after days of work，it seems not as easy as i thought. the driver ive tried is from here(https://github.com/karabek/xradio)，but it cant detect chip's hardware revision: [ 13.036884] xradio: XR819 device discovered [ 13.038054] xradio_wlan mmc1:0001:1: no mac address provided, using random [ 13.064445] xradio ERR: FWIO: Unknown hardware: -1. [ 13.064…

Hello, I’m running nanopi r4s with armbian 22.02.1 bullseye. After finishing edit /etc/network/interfaces via armbian-config, there was an error while restarting services. Fail to stop network-manager.service: Unit network-manager.service not loaded. However, for bullseye, network-manager.service might be no longer available.

Hi! just want to share the experience. I'm using Armbian in an environment that cannot access the internet. So, NTP becomes a big issue, and I have to setup my local NTP server using Chrony. Things should be simple, but it just didn't work out. I stuck with this problem for a few weeks until I realized I'm trying to setup Chrony NTP server on a virtual machine. Then, I found this one on stackoverflow. https://serverfault.com/questions/1062023/the-least-bad-settings-for-chrony-as-the-ntp-server-on-a-virtual-machine It suggests how to setup NTP server on virtual machine, but I didn't follow through as I solved my problem by setting up Chrony NTP ser…

I want to use cubieboard 1 to host 5 websites. So I installed bind9 for dns in order to add godaddy and bigrock. Please keep wan and lan in mind when reading this. The wan address is 122.157.152.57, while the lan address is 192.168.1.2. Some applications are functional, while others are not. Godaddy and Rockbig have already added bind9 DNS. On wan, Apache isn't working. It travels to modem or router login (ip address: 192.168.1.1) at domian projectok.com, and I can view a test html page on the LAN. webmin is operational. proftpd: Failed to start qbittorrent is up and running. I search and discover a resolv file in /etc that …

I want to use armbian along with freeipa. how can I disable the automatic user login (that is created during installation). how can I enter another username to login (freeipa user) 10x

Hello, I'm using armbian on Orangepi PC PLUS and i'm controlling GPIO pins with Python. Everything is working fine when I start my Python script. Problem is during boot with GPIO3, because it's by default on pull up, and that is making me problem on device which is connected to that pin. Can I change that pin to be default OUT and pull down? When my python scripts starts, it will change GPIO3 to OUT and set it to 0, but I have only problem during boot.

can someone tell me which board hardware supports video decoding with armbian? preferably with (C)VLC? Thanks a lot for your help!

Armbian 5.15.26-sunxi64 kernel breaks GPIO on NanoPi NEO2 Armbian 5.15.26-sunxi64 (bullseye) NanoHatOLED fails: - GPIO devices are missing; - /proc/cpuinfo lacks Processor, Hardware info. root@nanopineo2:~# uname -a Linux nanopineo2 5.15.26-sunxi64 #trunk.0002 SMP Thu Mar 3 10:24:53 UTC 2022 aarch64 GNU/Linux root@nanopineo2:~# gpio readall piBoardRev: Unable to determine board revision from /proc/cpuinfo -> Is not NanoPi based board. -> You may want to check: -> http://www.lemaker.org/ root@nanopineo2:~# cat /tmp/nanohat-oled.log open of gpio 0 returned -1: No such file or directory error opening gpio sys…

Sorry for my stupid question. If I connect by TTL to USB adapter, after setting up login/password, terminal is freezing. Board is Nanopi NOE2. I think this is due to the fact that my adapter is warm or not of poor quality. While I order a new one, is there a way to enable ssh access over the lan network?

Hi, since today the torrent downloader script "seed-armbian-torrent" on my seedbox fails to download the current "all-torrents.zip" from: https://dl.armbian.com/torrent/all-torrents.zip I then opened the link in my browser and I got a certificate warning (see attached). It seems the certificate for https://dl.armbian.com/ expired on 21. May 2022. Can someone confirm this, or is it an error on my end?

I have been trying to get a 7" waveshare touchscreen to work with the orange pi zero2. I've checked that the touchscreen isn't faulty by using with a raspberry pi. I also checked that the output from the orange pi is working by using my computer monitor. It just doesn't want to output to the touchscreen (hdmi).There seems to be some thin grey horizontal lines. I do get a flicker at startup of the orange pi, but that is about it. Any idea's? I'm new to armbian, so if you have an idea, please list me some steps or point me to some documentation to help. I appreciate the help.

I still have a Banana Pi BPI-R1 on which I wanted to install PiHole. Can't find a suitable image? Is the Banana Pi BPI-R1 still supported?

Dear community, dear @Igor (as maintainer of NEO3 CSC), thanks a lot for the NEO3 support. This board ran rock solid for me approx. two years straight – much more stable than my other SBCs running Armbian (due to various reasons, no offense :)). However, the board failed to boot with "ERROR: Did not find a cmdline Flattened Device Tree". It appears that ``rk3328-nanopi-neo3-rev02.dtb`` went missing. This must have happened when upgrading the package ``linux-dtb-current-rockchip64`` from 21.08.2 to 22.02.1. As a workaround, it helps to (download the CSC image for the board again, get the file out of the image,) place the file in ``/boo…

Hello, A while back i was using my rock64 as a media player running armbian with some success. Since a hiatus and reinstall of the latest armbian focal mainline release, the i2s output no longer works. I can get output on the 3.5mm jack, but not on the RCAs of the DAC board. I spent some time playing around the fdtget/fdtput with no success as i don't really know what i'm doing in that space. Does anyone know how to enable I2S? Volumio got mentioned allot in my google searches, so i tried that and viola the DAC works again. volumio@volumio:~$ aplay -l **** List of PLAYBACK Hardware Devices **** card 0: HDMI [HDMI…

Hello. I'm trying to understand how to build u-boot for my board. I have Nanopi Neo Core + Mini Shield and want to buid u-boot loader for it. I have some problems, maybe someone can help me) I decide to try extlinux.conf file create boot menu. First of all i got current version of u-boot (https://github.com/u-boot/u-boot) and configure it with Nanopi Neo default config: make nanopi_neo_defconfig i have next output in console: U-Boot SPL 2022.07-rc3-00073-g4fe629d2e8-dirty (May 29 2022 - 23:11:36 +0300) DRAM: 512 MiB Trying to boot from MMC1 U-Boot 2022.07-rc3-00073-g4fe629d2e8-dirty (May 29 2022 - 23:11:36 +0300) Allwinner Technolog…

After upgrade to Bullseye 5.15.26 I can't enable spi-dev on my board. Previously I used Buster 5.3.9 and everything worked well, after upgrade /dev/spidev0.0 dissappeared. Board is working fine (reinstalled 5.3.9 and SPI working). Is there any trick which need to be made to enable it ? armbianmonitor.txt

Hi all. I am new in both OrangePi hardware and Armbian OS. I bought Orange Pi Zero 512 MB. I aim to develop a stand-alone device using this board. I am too confused with my readings. Do you have any idea for the following run rules together on the same board? (1) When I connect via serial (USB), it runs bash. It will ask user name and password. I can write a program, compile it, update the OS, and change settings. <This part is okay.> I want to use a GUI for this part. (2) When I supply 5-Volt power via extension pins, it runs stand-alone. It will not ask for a username and a password. It starts with an application developed in either Python or C programming lan…

I've got one of these boards. It is just Kernel development that has ceased as there are no maintainers? (Had I had the skills, I would have happily maintained it. ;-( ) Also, to get the latest Kernel later on, is it as simple as obtaining the official sources and then compiling (or cross-compiling to ARM) and then install the Kernel? On this one I'm a bit like a duck out of water and if anyone can point me along the right path, all help will be greatly appreciated.

Hello together, I just can't get VLC to work with 1080p mp4 on Armbian 22.02 Bullseye. The video starts, but it jerks enormously. 720p on the other hand runs perfectly. Does anyone have any ideas? best regards, Mike

I am trying to figure out how to create a dtoverlay to allow my waveshare 2.8a fbtft screen to work. I understand that i the 5.x.y kernels, a dtoverlay is required. I'm starting with the waveshare32b.dts for raspberry pi, found here: https://github.com/swkim01/waveshare-dtoverlays Should be compatible with the 2.8a per waveshare wiki. I'm trying to modify it in sort of the same way as was done in this thread, for another display: The board I'm using for this is an orangepi pc2. But i don't' actually know what I'm doing. What I've come up with so far is this: /* * Device Tree overl…

Hi, everyone! Khadas Vim3l on Ubuntu, armbian. No hdmi sound, boot without any changes, fully stock! Tried to boot on 4.9 image from khadas and android pie - success. Imagies that is no hdmi sound only dummy output: Armbian_22.02.1_Khadas-vim3l_jammy_edge_5.15.25_xfce_desktop.img Armbian_22.02.1_Khadas-vim3l_focal_current_5.10.102_xfce_desktop.img Armbian_22.05.1_Khadas-vim3l_jammy_edge_5.17.5_xfce_desktop.img Armbian_22.05.1_Khadas-vim3l_focal_current_5.10.110_xfce_desktop.img How to fix?

Hi, Is it possible to install python in armbian OS. Thank you for the answer

I've tried without and with --no-allow-insecure-repositories and --allow-unauthenticated Cert issue on the remote? ns1@ns1:~$ sudo apt-get update Hit:1 http://security.debian.org buster/updates InRelease Hit:2 http://httpredir.debian.org/debian buster InRelease Hit:3 http://httpredir.debian.org/debian buster-updates InRelease Ign:4 https://apt.armbian.com buster InRelease Err:5 https://apt.armbian.com buster Release Redirection from https to 'http://armbian.tnahosting.net/apt/dists/buster/Release' is forbidden [IP: 173.45.128.12 443] Reading package lists... Done E: The repository 'https://apt.armbian.com buster Release' no longer has a …

Not sure if this is beginner or advanced, so I guess I'll start here. I have a "le potato" I recently bought. Getting it working has been a nightmare, but I'm almost there. Right now my project is to get a 32x64 RGB matrix working using an adafruit hat. I got Armbian 22.02.1 Focal running on it, and I'm using the gpiod library. I've had to write my own access library, but I've almost got it working, translating the pin labels ("7J1 Header Pin15") to the appropriate GPIO/offset values for use with gpiod. Except for exactly one. I try to use request_line on GPIO 22 (chip 0, offset 10) and it gives me an invalid argument. Doesn't do t…

Hello all. I'm obviously a newbie to this all and have a Libre Le Potato I just purchased. Put in Armbian Bullseye and got everything configured so my Python script runs on boot and writes the data it records by sending a byte string through the USB port to a device and records the parsed response. All is well there, but I needed to add an RTC to this and I have many DS3231 boards that I've integrated with Arduino boards recently and they all work well. I've soldered the connections to the 3.3V, GND, SDA, and SCK pins and matched those to the GPIO pins 1, 9, 3, and 5 respectively. I've gone into 'armbian-config' and enabled…

hi ! how can i install ffmpeg with h264_v4l2m2m and drm on jetson nano for now i install kynesim ffmpeg from rpi drm is working but no hwdec on mpv is there another repro like libreelec or kodi tom

Does anyone know what sort of latency there is using mainline hw accelerated video encoding on Allwinner H3(H.264/265)? How about latency of mjpeg(if it is supported)? I'm trying to build a system with lowest possible latency.

I'm trying to add a USB device using configfs to the zero but I don't want to break the pre existing serial connection on USB0 so I want to put it on USB3, the overlay has this as usbhost3 so before I spend hours designing a daughter board and trying to fix something that's never going to work the question is can I use this interface for a device.

http://ix.io/3XOk I attach the video of the bug in armbian-config. I tried editing the environment.txt file and enabling w1-gpio and pin but it doesn't work. the device connected is a temperature sensor that has always worked for the past 4 years is a ds18b20 (https://forum.armbian.com/topic/8095-orangepi-zero-not-working-with-1-wire/) Screen record from 2022-05-15 10.33.29.webm

Hi. I have a freshly installer Jammy (XFCe) version installed on a Pinebook Pro and after the install run one single update. sudo apt update sudo apt upgrade As part of that upgrade a message appeared to inform me that the existing firefox installion will be replaced by a snap version, apparently standard in Ubuntu now. The installation did not show any errors but if I want to start firefox in the snap version now I get this error: mmw@pinebook-pro:~$ firefox & [1] 3726 mmw@pinebook-pro:~$ /user.slice/user-1000.slice/session-c2.scope is not a snap cgroup As this is all still almost out of the box, is the…

i want to boot from sdcard and auto detect if boot from sdcard auto exec nand-sata-install with options and output progress to screen

Hello: I have been trying to install the desktop environment with armbian-config System/ Default : Install desktop with browser and extras and nothing happens. Does anyone have an idea of the problem. Orangepi Zero Plus2-h3 / Armbian-22.02.2_orangepizeroplus2-h3_jammy_edge_5.16.12.img.xz After reboot returns back to CLI Thanks.

I know I shouldn't have, but I bought today a Sunvell H3 2GB RAM + 16GB ROM TV Box. I have no idea if this will run Armbian someday, but I had to try...

Hello armbian friends, I am not really a beginner but I don't find a fitting forum to ask this. Having manually upgraded the first day it was possible to Bullseye, my MOTD and armbian-release got stuck on the old version. Everything runs very very good, I have a very up-to-date kernel and love it. Any chance I can repair my broken MOTD? What did I do wrong when I changed my sources.list and armbian.list? Kind greetings

Hey. I have a waveshare 4.3" 480x272 screen, that I'm trying to get to work with my orange pi zero +2, or nanopi M1 plus. However, I can't get the screen to show the right resolution - that only seems possible on my raspberry pi (which I don't want to use for this project). I've been running over all the (little) info I can find, and it seems to be a general problem to get hdmi working if the screen edid is a bit flaky - is this still the case, or is it possible to get this combination of opi/nanopi to work on this display? Regards. Anders

latest version build orange-pi-pc-plus with some ld error: ./compile.sh docker /root/armbian/cache/toolchain/gcc-arm-8.3-2019.03-x86_64-arm-linux-gnueabihf/bin/arm-linux-gnueabihf-ld: fs/sync.o:(___ksymtab_gpl+__sync_filesystem+0x0): undefined reference to `__sync_filesystem' make: *** [Makefile:1185: vmlinux] Error 1 Displaying message: Compiling current kernel 5.15.37 info Displaying message: Compiler version arm-linux-gnueabihf-gcc 8.3.0 info Displaying message: Using kernel config provided by user userpatches/linux-sunxi-current.config info Displaying message: Compressing sources for the linux-source package Displayi…

Hallo, ich habe ein Tinkerboard S und habe per SD Karte Armbian installiert. Dann per ssh root@ip-adresse . Bei der Passowort 1234 eingegeben. Aber das passwort wird nicht anerkannt. Gibt es inzwischen ein neues Passwort? Gruß Eberhard61 Translation: Hello, I have a Tinkerboard S and installed Armbian via SD card. Then via ssh root@ip-address . Entered the password 1234. But the password is not recognized. Is there a new password now? greeting Eberhard61

Armbian is community driven open source project. To keep it relevant and up to date it needs maintenance round the clock. This work is done by a small amateur contributor force which was under-powered since early days and it still is. For most basic tasks! Any help is more then welcome. https://forum.armbian.com/staffapplications/ (what do we need) https://docs.armbian.com/Quick_facts/ (overview) https://www.armbian.com/get-involved/ (how-to contribute) https://github.com/armbian (sources for build engine, documentation, scripts) <---- <---- <---- Also refactoring, better wording, code cleanup. General tips: …

Two days ago I was able to build a minimal server installation of Bullseye Armbian for this board with no problems. My sd card crashed and I built the img file in tmp on a VM machine, so no backup (I know, live and learn). Last night I tried building this img again, minimal server, desktop and all the bells and whistles, but it keeps failing. Here is what I get: LD [M] drivers/staging/rtl8723cs/8723cs.o AR drivers/built-in.a GEN .version CHK include/generated/compile.h UPD include/generated/compile.h CC init/version.o AR init/built-in.a LD vmlinux.o MODPOST vmlinux.symvers MODINFO modules.builtin.modinfo GEN modules.builtin LD .tmp_vmlinux.kallsyms1 sc…

Hi, I am unable to build any images for orangepi SOCs specifically orangepilite, orangepilite2 and one plus. Always returned error halfeway. Following is a sample of log when I compile image for orange pi lite. Please me some guidance on how to resolve this. My steps: run sudo compile.sh -- "Do no tchnage the kernel..." --> "orangepilite"--> either current or legacy --> either "buster" -->"Image with console inter..." -->"Standard image with ..."compilation.log

I am going through the following when trying to install tvheadend: Then I see briefly (< 1 second)... followed by, for another < 1 second: and then it quickly returns to: I can repeat this over and over but the software doesn't get installed. df shows only 6% used in /. Any ideas? What can I do to find out why this happens? Is there a command line option to trigger this process manually where I can observe what it does? Many thanks, Chris

My Banana Pi get a kernel panic if I try to shut it down as you can see in the picture. How can I fix this? I'm using Armbian 22.02.1 with Linux 5.15.25-sunxi http://ix.io/3VHA sudo i2cdetect -y 0 0 1 2 3 4 5 6 7 8 9 a b c d e f 00: -- -- -- -- -- -- -- -- 10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 30: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 40: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 50: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 60: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 70: -- -- -- -- -- -- -- --

I am using Armbian for a long time on mi Orangepi mini (A20), board not supported but installing image Bananapi M1 it has been working very well adding fdtfile=sun7i-a20-orangepi-mini.dtb on /boot/armbianEnv.txt After running apt upgrade kernel package is upgraded from 5.10.60-sunxi to 5.15.25-sunxi i get this errors: S'està configurant linux-image-current-sunxi (22.02.1)… update-initramfs: Generating /boot/initrd.img-5.15.25-sunxi modinfo: ERROR: Module /lib/modules/5.15.25-sunxi/kernel/drivers/cdrom/cdrom.ko.xz not found. modinfo: ERROR: Module /lib/modules/5.15.25-sunxi/kernel/fs/isofs/isofs.ko.xz not found. modinfo: ERROR: Module /lib/modules/5.15.25-s…

https://www.armbian.com/uefi-arm64/ said it suppport PHYTIUM D2000, so i want to ask, if it support PHYTIUM FT2000/4 ?

Hi everyone! First thank you for providing this beautiful piece of software, Armbian rocks! I am running Armbian 22.02 Bullseye on my Odroid HC4. After booting I did apt update apt upgrade Next I went into armbian-config -> Software -> Headers_install So I ended up with this configuration $ uname -a Linux odroidhc4 5.10.102-meson64 #22.02.1 SMP PREEMPT Sun Feb 27 09:09:25 UTC 2022 aarch64 GNU/Linux $ apt list --installed | grep meson64 linux-dtb-current-meson64/bullseye,now 22.02.1 arm64 [installed] linux-headers-current-meson64/bullseye,now 22.02.1 arm64 [installed] linux-image-current-meson64/bullseye,now 22.02.1 arm64 […

Hey all, So recently I got myself an Orange Pi Prime so I could attempt to do some SPI flashing through spidev and flashrom. I have been going at it, set up the board, got an actually decent power supply, and set up everything. Eventually I got myself into the steps of setting up the pins for spi use. At first, I used armbian-config to enable the spidev into /boot/armbianEnv.txt then I added param_spidev_spi_bus=0 into armbianEnv.txt I rebooted and the spi device file still doesn't show up, any ideas? I have: went through armbian-config (System -> Hardware -> spi-spidev) added param_spidev_spi_bus=0 to armbianEnv.txt …

Hi. I have installed the Armbian Jammy version for the Pinebook Pro and right after installation without any changes I get this error when I want to upgrade. Any idea how to fix this? mmw@pinebook-pro:~$ sudo apt-get update [sudo] password for mmw: Get:1 http://ports.ubuntu.com jammy InRelease [270 kB] Hit:2 https://ppa.launchpadcontent.net/oibaf/graphics-drivers/ubuntu hirsute InRelease Hit:3 http://ports.ubuntu.com jammy-security InRelease Hit:4 http://ports.ubuntu.com jammy-updates InRelease …

Good day. I have a board ODROID N2 +, 2x TBS5520se. OS: Linux odroidn2 5.10.111-meson64 #trunk SMP PREEMPT Wed Apr 20 07:09:24 UTC 2022 aarch64 GNU / Linux After I managed to install the TBS drivers, I found that something was wrong. After running the kodi, the UHD channels hardly work at all. Does anyone have experience in solving this problem?

I have installed clean CLi option of Armbian_21.08.1_Rockpro64_focal_current_5.10.60.img from the archives I have fully apt updated/upgrade OS and now am at 5.15.25-rockchip64 I noticed there was no sound coming out of the HMDI only from 3.5mm Jack Alsamixer has: (volume bar with up/down instead of 1 increments jumps 0>28>56>100 - I d like to fix this) Pulsemixer (CLi) solved my problem by simply while playing an audio stream/file I swapped (made default the bottom Built-in Audio Stereo) Also on Cards tab (use tab to move keys F1-F3 didnt work for me neither on Tink…

I am just looking for a working image that would have the 8821CU working. I've been able to make it work on Ordoid HC-4, but on N2+, it didn't work. Also, my N2 setup on armbian had some problem. I launched sudo armbian-config, tried to install headers and firmware, but I couldn't. It didn't provide any error message, it just showed the loading bar and quitted quickly (as if it completed). Then I tried Nigthly and I was able to download headers and firmware, but still wasn't able to get 8821CU working (now thinking about it, I don't recall checking out if it was detected from lsusb... I'm not entirely sure). Then I went back to stable and now I'm no longer able to bo…

I have installed Armbian_22.02.1_Orangepizero_bullseye_current_5.15.25.img.xz. I started my OrangePi 0. I chose ZSH (not BASH) I did Update and Upgrade. When trying to execute the command (as a normal user) build-essential I get: orangepizero:~:% build-essential zsh: command not found: build-essential orangepizero:~:% sudo apt-get install build-essential Reading package lists... Done Building dependency tree... Done Reading state information... Done build-essential is already the newest version (12.9). 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. orangepizero:~:% build-essential zsh: command not found: build-essential How can I successfully run bui…

Before I file a bug for this, I want to make sure I'm not doing something wrong. I am trying to enable PPS on GPIO pin PD14 of an Orange Pi PC2. I've enabled the pps-gpio and uart overlays in my /boot/armbianEnv.txt file and rebooted. root@ntp0:~# cat /boot/armbianEnv.txt verbosity=1 bootlogo=false console=both disp_mode=1920x1080p60 overlay_prefix=sun50i-h5 rootdev=UUID=20dbbd2a-5783-4f98-b467-62fa62990ac8 rootfstype=ext4 overlays=pps-gpio uart1 param_pps_pin=PD14 usbstoragequirks=0x2537:0x1066:u,0x2537:0x1068:u root@ntp0:~# On reboot I see the following problem in dmesg: [ 5.542593] pps-gpio pps@0: failed to map GPIO to IRQ: …

Hi Mates, when i check my device with the dmesg command it looks like that my harddrive (connected WD Red Hard Drive via SATA) has an issue: 3.404949] mmc1: new high speed SDIO card at address 0001 [ 7.204630] ata1.00: exception Emask 0x0 SAct 0x2 SErr 0x0 action 0x0 [ 7.204662] ata1.00: irq_stat 0x40000000 [ 7.204676] ata1.00: failed command: READ FPDMA QUEUED [ 7.204686] ata1.00: cmd 60/08:08:00:66:54/00:00:57:00:00/40 tag 1 ncq dma 4096 in res 41/40:00:00:66:54/00:00:57:00:00/40 Emask 0x409 (media error) <F> [ 7.204718] ata1.00: status: { DRDY ERR } [ 7.204728] ata1.00: error: { UNC } [ 7.20601…

Hi, I need linux headers included in the distribution to install a given software because it requires a kernel modification. It seems that some distributions contain linux headers and some do not. Is there a way to determine whether a distribution has those headers other than installing and trying it out. I have an Orange pi + 2. cheers Martin

In Alsamixer its missing the master volume. In older legacy images it was there and driver seemed to be a tinker rockchip driver? Any idea how to enable the master volume slider? If I increase volume in USB sound card (headphones) then no sound comes out at HDMI and only way to restore is to purge deb of pulseaudio and alsa and re-install. There are some errors also the moment i log into cli if I do above. If reproduced ill post here (update). Similar error posted on another topic/board If i test `aplay /usr/share/sounds/alsa/Front_Center.wav` its ok. After any change to alsamixer nothing comes out The errors that started after ch…

Attempted to work with both latest Bullseye and Focal images for OrangePi R1 but in both instances got the following message: E: Failed to fetch https://xogium.performanceservers.nl/apt/pool/focal-utils/w/wpa/hostapd_2.10-6~armbian22.02.3+1_armhf.deb Certificate verification failed: The certificate is NOT trusted. The certificate chain uses expired certificate. Could not handshake: Error in the certificate verification. [IP: 104.36.81.15 443] E: Unable to fetch some archives, maybe run apt-get update or try with --fix-missing? Pasted here (duplicate of above) as well valid 90d. http://paste.debian.net/plain/1238152

[ .... ] Installing from repository [ linux-u-boot-orangepi3-lts-edge ] [ error ] ERROR in function install_deb_chroot [ main.sh:589 -> main.sh:550 -> debootstrap.sh:69 -> distributions.sh:292 -> image-helpers.sh:225 -> general.sh:0 ] [ error ] Installation of linux-u-boot-orangepi3-lts-edge failed [ orangepi3-lts jammy yes sunxi64 ] [ o.k. ] Process terminated [ error ] unmount_on_exit() called! [ main.sh:1 -> image-helpers.sh:0 ] [ o.k. ] Unmounting [ /home/bogdan/build/.tmp/rootfs-664a2c64-6020-46d2-9a3d-befe609b050d/ ] [ error ] ERROR in function unmount_on_exit [ main.sh:1 -> image-helpers.sh:94 -> general.sh:0 ] [ error ] deboot…

Hi, on my Bananapi M1 I have a 240GB SATA SSD connected for storage. Unfortunately I'm losing connection after a couple of days sometimes hours. Do you have an idea why? Apr 13 22:13:16 localhost rngd[854]: stats: Lowest ready-buffers level: 2 Apr 13 22:13:16 localhost rngd[854]: stats: Entropy starvations: 0 Apr 13 22:13:16 localhost rngd[854]: stats: Time spent starving for entropy: (min=0; avg=0.000; max=0)us Apr 13 22:13:18 localhost kernel: [ 3627.151866] ata1: COMRESET failed (errno=-16) Apr 13 22:13:18 localhost kernel: [ 3627.151914] ata1: hard resetting link Apr 13 22:13:23 localhost kernel: [ 3632.504265] ata1: link is slow to respond, plea…

My NanoPi M4 4Gb suddenly fails to get out to internet, I checked it was OK to link via eth0 but ping fails. Not sure what to do. Please ask me what I can try. It was working but something broke! Sorry but I am not too good at this, any suggestions please? Thanks James

Using Orange Pi zero Revision 1.5 loaded with Armbian Buster 21.08 ArmbianMonitor Logs: http://ix.io/3UXu The board is reporting very low temperatures, with htop and when I ssh on the login banner. Temperatures range from 3 or 4 C but also seen -3404C screenshot https://imgur.com/a/SCLVMYl Previously with Armbian 19.11 and kernel 5.4 temperatures were reported normal 33 or 37C I dont overclock and run my SoC from 480 to 960MHz (keeps current and power down). Screenshot of Armbian 19.11 kernel 5.4 and kernel 5.10.4.sunxi temperatures were normal (30 - 37C) Screenshot below: https://imgur.c…

Linux orangepizeroplus 5.15.25-sunxi64 #22.02.1 SMP Sun Feb 27 09:24:04 UTC 2022 aarch64 GNU/Linux. I don't see anymore the /sys/class/gpio... directory. Has this been suppressed or is my filesystem corrupted? The /sys/class/ dir exists w/ a lot of stuff, just gpio is missing! This is duplicated in Discord, but I'm not sure, if it is right there (1st use)

Dears, I have recently posted several issues wrt. OPi0+. GPIO (sysfs), armbian-config (bug confirmed by Igor), WiFi AP, GPIO event handling. Except for GPIO, where high activity is going on, I cannot find anything in "GitHub-issues" about the other problems, I have raised. I therefore would like to know, what would be the right place to rise issues? Here in the forum, or in GitHub? I mean "issues", not "how tos"