Beginners

Hello guys! I find it very convinient to see the temperature of the NVME drive installed while being logged on via SSH. How can I add the temperature of the drive right under the temperature of the cpu? I added a line: "echo -e "NVMe Drive Temperature: \033[32m$(sudo nvme smart-log /dev/nvme0n1 | grep temperature | sed 's/.*: //;s/ C//')°C\033[0m"" to the file /etc/update-motd.d/10-armbian-header What is the best way to do it?

Due to systemd, Journal is going to replace all journals sooner or later, it's already one of the busiest journaling on the sytem. The logs are binary and can't be rotated like text logs, they are already compressed and can't be read by text editor, instead only by journalctl. Thus, in /usr/lib/armbian/armbian-ramlog , the directory /var/log/journal is excluded from standard log rotation and copying to HDD. Instead, it is copied once to /var/log.hdd/journal and a soft-link is created: /var/log/journal pointing to -> /var/log.hdd/journal . The RAM logging was introduced to spare the SD card, preventing many write actions that wear the SD card qui…

ls /sys/class/udc > UDC ls:write error: Device or resource busy I'm trying to get an armbian device (banana pi m2 zero and/or the orange pi zero LTS) to function as a USB client, but I can't seem to get the above step working. Any suggestions? lsof UDC returns nothing. On the RaspberryPI 4 this worked without issue

Is there any support for Rock 3 C (RK3566)? I've tried booting from the Rock 3 A image, but no joy. It looks like the Rock 3A was RK3568 so I wonder if using another device tree overlay for RK3566 might otherwise work?

Tested with speakers and headphones, now working right channel in 3.5 mm. Speakers and headphones works correctly with another devics. Tested on official builds(firstly), pulseaudio, pipewire+wireplumber, also tested self-builded via official building script with same drivers. Speaker-test detects only front left channel. What it may be? How I can fix that? Thanks in advance.

Hi All, I have a BPI-M2 ZERO, BANANA-PI-ZERO with SERIAL to USB plugged in. It's being detected by lsusb Bus 002 Device 005: ID 1a86:7523 QinHeng Electronics CH340 serial converter but it doesn't appear under /dev/ttyUSB0 The problem is that I can't see it under /dev/ as /dev/ttyUSB0. I haven't tried installing CH340 drivers yet. Should I use the ones for Ubuntu? Here is the tutorial I found but I'm not sure if those are the correct drivers: https://learn.sparkfun.com/tutorials/how-to-install-ch340-drivers/all uname -a Linux bananapim2zero 6.2.13-sunxi #1 SMP Wed Apr 26 12:30:09 UTC 2023 armv7l GNU/Li…

I built armbian from the main branch for my tablet based on Allwinner A33 and the topic: Used q88_a33_tablet_1024x600_defconfig and tried q8_a33_tablet_1024x600_defconfig the image was built successfully, at startup I see the console of u-boot, and can use it bu OTG, but only before message the kernel starting... and then after kernel starting it will a black screen as i think the video mode or something else is configured incorrectly, I checked the boot kernel logs, the kernel starts successfully, there are no any errors during start, apparently the problem is only in the video output on my tablet. I ask for help, help me understand what th…

Dear All, I got a zfs upgrade today, I updated the packages but then it failed to build the module, thus I tried to update kernel and firmware but it failed the same: hecking whether CONFIG_MODULES is defined... no configure: error: *** This kernel does not include the required loadable module *** support! *** *** To build OpenZFS as a loadable Linux kernel module *** enable loadable module support by setting *** `CONFIG_MODULES=y` in the kernel configuration and run *** `make modules_prepare` in the Linux source tree. *** *** If you don't intend to enable loadable kernel module *** support, please compile OpenZFS as a Lin…

Hi, trying to nut out the problem of being unable to restart after installation of the OMV Wireguard plugin. I have removed the wireguard-tools package and installed the 4 rockchip64 edge 6.1.11 packages. It took me a while to realise that armbian-config was not installing the headers when selected but wondering if there's a necessary order for installation ie linux-source-6.1.11-edge-rockchip64 first maybe? Sorry I realise how tedious it is supporting folks who are feeling around in the dark but I've wasted so many hours starting from scratch I either have to give up or ask for a tip. TIA

I have an orangepi pc and am trying to use a 3.5 inch TFT-LCD using fbtft. I was told to use armbian 20.05.4_Orangepipc_focal_current_5.4.45 in this case. I am trying to find version 5.4.45. But it hasn't worked out yet. The oldest in the archive is version 5.10. May I know how to find the 5.4.45 version? Please tell us

Hello, I'm new here. I started using the armbian OS 2 days ago, and I'm facing some problems when running some web-server transfers due to lack of space on /tmp. By default /tmp is mounted on RAM, and due to low space many operations fails. How can I mount the /tmp on the Disk/SD card? ### Some details ### Tried commenting out the line on /etc/fstab ( didn't work ) #tmpfs /tmp tmpfs defaults,nosuid 0 0 Tried to disable it from the systemclt ( didn't work ) sudo systemctl mask tmp.mount Searched on armbian-config , didn't found anything related. df -h /tmp Filesystem Size Used Av…

Hello I use a odroid c2 und create a full img backup. Can i use this in a newer odroid like too? I have some programms etc on it and don't want to reinstall it.

Hello! Recently i bought an Orange Pi 4 LTS. I choosen armbian for my os. I installed it to sd card, but I wanted more. I decided to flash the system to eMMc. It was a mistake. Instead armbian-config tool, i executed armbian-install, and flashed bootloader to eMMc 🤦‍♂️. After that, i was checking the sd card, reading the logs, nothing helped. I have official 5v 4a dc adapter, factory new sd card, but my board only shines with a red LED, and does not boot into the system.

I'd like to run usbdux usb hardware with armbian but have no experience so far in building modules. I compiled the current armbian branch form github. But I could not figure out how to compile the comedi drivers and include it in the kernel. help appreciated Thomas

I seem to have broken my vim3. What image do I flash using the usb flashing tool to make it boot and not have the light flashing fast? Thanks

Hello Armbian community I just acquired a Raxda Rock 3A with a Raxda Wireless module A8 (RTL8852BE) card. The Ubuntu distribution from Raxda seems to work pretty well, but it's not very recent, which is why I wanted to try Armbian! The current version (Armbian 23.02 Jammy Kernel 6.1.y, Size: 579Mb, Release date: Feb 27, 2023) seems to work, but I have two questions: 1) No wifi, the card is not detected (probably a driver issue, it works with the official OS), if there are members who have solved this? 2) I haven't seen much information on setting up a boot from an nvme storage, have you tried this? Have a g…

I'm installed Armbian_23.02.2_Orangepi5_jammy_legacy_5.10.110_xfce_desktop to Orange Pi5. I have attached external RTC module with DS3231 on I2C5 (/dev/i2c-5) and try it. https://forum.armbian.com/topic/7349-rtc-ds3231-how-to-install-tinker-board-stretch-414/#comment-56094 (Instead of I2C-0, it was I2C-5.) However, the DS3231 does not recognize it. I type i2cdetect -y 5, it remains at 68 without becoming a UU. Is there any solution?

I tried setting SKIP_BOOTSPLASH=yes from Hidden options for advanced users of the Build Options page, but the Armbian splash screen still appears. Since I have to ask here, I am obviously not an advanced user. 🙃 How do I eliminate the boot splash screen as I am building/testing images? ./compile.sh \ BOARD=visionfive2 \ BRANCH=edge \ RELEASE=lunar \ BUILD_MINIMAL=no \ BUILD_DESKTOP=no \ KERNEL_CONFIGURE=no \ SKIP_BOOTSPLASH=yes \ CARD_DEVICE="/dev/sdb"

Опубликовано: только что · Hidden - This content must be approved before it can be edited. HOT NEWS!!! With Armbian Armbian 23.02.2 Jammy with Linux 5.15.93-rockchip64 on (rockpi-4b plus v.1.72) Add (do it elso on all booting fevices = MMC, NVME, MPD, SD) the following lines to /boot/armbianEnv.txt overlays=spi-jedec-nor param_spinor_spi_bus=1 Reboot If you shorted 23-25 pins in 1.) then: disconnect them after the ROCK Pi 4 fully boot's enable spi-nor by executing (as root): echo spi1.0 > /sys/bus/spi/drivers/spi-nor/bind verify that the SPI mtd interface is enabled by running ls /dev/mtdblock0 if the last comman…

I just got my tinker board r2.0 today and installed the cli version of armbian. But it seems the wifi module is not regocnized. So also in the armbian-config under network there is no wifi option with SSID and Password fields. Any Idea how I can get it up and running? Also the ifconfig -a command does not show wlan0

Is there any support for this platform. https://wiki.seeedstudio.com/Quantum-Mini-Linux-Development-Kit/ Devicetree https://github.com/coolflyreg/quark-n If not. Where can I see how to add a new platform. If template or tutorial. Original system is Ubuntu 18 and very old kernel. I like Debian better.

Hallo my odroid C2 shutdown during the night. i can see it always on the next day, when the ssl connection is disconnected. Is there any log file, where i can see, if there was any problem? thank you

Hi, I have Armbian 23.05.0-trunk Bullseye with Linux 5.4.239-odroidxu4 on my XU4. I recently bought a USB Bluetooth adapter using RTL8761A. But the firmware is not present in rtl_bt. I want the Bluetooth adapter to work for Home Assistant. I am quite new to this stuff, so if you need any additional information i will provide. Thanks in Advance.

My dotnet apps not work in new armbians(libssl error). How downgrade openssl 3.0 downto openssl1.1.1?

Hello everyone! I'm new here, and I want to ask about my Orange Pi One. (I have posted this on different platforms also but I don't have any answers yet.. And someone recommended this community..) The problem here is I have a GC2035 camera module that I inserted behind my Orange Pi one, I tried running "ls /dev/video*" to check if it can recognize my cam, and it can recognize it, the result is "/dev/video0" Now when i tried to run "fswebcam test.jpg", there was an error, the error was: No input was specified, using first. Unable to query input 0 VIDIOC_ENUMINPUT: Inappropriate ioctl for device So that's why i tried…

Hello. I tried installing Armbian_22.08.1_Orangepizero2_bullseye_current_5.15.63 on Orange Pi Zero 2. I am using it without display. It did get installed. However after updating and upgrading it did not boot at all. Can someone please help? Regards, Amol

I cant use the number keys on my keyboard to type in 1234 as the manual says. I can only type in "root" at the login but I cant type anything in the password section.

Hello kind folk. Hoping someone can help. What's listed below is what gone wrong. Armbian monitor diagnostics dump: http://ix.io/3yOY All I've done is install Armbian, did the 'apt update && apt upgrade' and enabled options to see how will it will work. I'm not sure if I have done something wrong for several DT overlays not to load. I can see it states that (what is an ftd?) base ftds are missing a node and need recompiling. How do I do that? (The analog codec does load. It's the only one that does.) U-Boot SPL 2020.10-armbian (Aug 08 2021 - 14:48:33 +0200) DRAM: 1024 MiB CPU: 912000000Hz, AXI/AHB/APB: 3/2/2 Trying …

Hello I want to get cpu and ram infos via bash command. So i use this for temperature: For the cpu usage i needed a long time to find a solution. now i found this: echo $[100-$(vmstat 1 2|tail -1|awk '{print $15}')] For the free ram usage, i will use free --mega My question Are this command correct? the cpu command line is really new for me... does it takes a lot of ressources, if i use this commands every 2 seconds to get a real time listening? i need to write it in a database to get a graphical solution. Thank you for your help

Upgrading to the latest Armbian build 5.15.25 on the M2-Zero has caused the camera to stop working. I had a build from https://github.com/Qengineering/BananaPi-M2-Zero-OV5640, and ive seen my camera work with Gstreamer but i now need it to use the hardware encoding. So i used https://wvthoog.nl/nanopi-ov5640-camera/ to enable the Cedrus encoder, but upgrading the devices loses the camera and /video1. There is no /video1, or media1. Ive tried to edit the dts files, build and push them but no luck. Any advice here would be good. I know there are a few topics on here on this subject, but they are all slightly different issues because of the ke…

Hey Gang, I'm a very novice linux user, just know enough to get around and follow instructions for the most part. I recently started getting the following error when trying to ssh to my armbian box from an up to date macbook. Unable to negotiate with <ip address> port 22: no matching host key type found. Their offer: rsa-sha2-512,rsa-sha2-256,ecdsa-sha2-nistp256,ssh-ed25519 I've read online that you can get around this with "-oHostKeyAlgorithms=+ssh-dss" temporarily, but I cant seem to find a guide on how to regenerate the host keys on armbian to match more current standards (or what I assume is ssh's up to date minimum) Doe…

Hi Guys, I'm new on Armbian but not on Linux in general. I was pleased to see an up-to-date armbian release for my nanopi-r4s with a kernel greater than 6.x ! 🤗 For my first day, it's pretty good and I can find most of the things I was looking for (even ripgrep). But, I have a look at the services and I've found that haveged is still set. For what I know, since 5.18 version, "Linus" changed his mind for entropy (see https://www.phoronix.com/news/Linux-5.18-RNG). You can have a look at /proc/sys/kernel/random/entropy_avail which is always set to 256 now. Thanks again and best regards !

I've been seeing tutorial on how to setup ili9341 tft lcd and all of them are post from 2017 or older... tried doing it on newer version but I think ili9341 are not supported out of the box anymore by armbian

Hello. First, I have an LTS board that provides only 3.05 on the 3.3 pins. Is it normal ? Anyway, in case this was the issue, I have built a new voltage regulator, and now supply the DHT22 and pullup resistor with 3.60V My issue is simple: when plugged on normal 1W bus, the DHT22 kills the bus, and makes other devices non working. I have moved all other devices on a new bus, leaving the DHT on a bus I know works fine. Some people mentionned the DHT is not compliant with official 1W libraries, and can not be recognised with normal timings, so, special libs are required. I have removed param_w1_pin=PA06 for the hysical pin 7, and installe…

HI, I am hoing someone can help. I cannot seem to get UART1 working on Orange Pi1. Uart2 and Uart3 are working just fine. Everything indicates that the port is enables on the module but there is no actual data being sent out of PINs 38 and 40. Verifying that the port is enabled root@orangepione:~# dmesg | grep tty [ 0.000000] Kernel command line: root=UUID=1d571c77-01ce-4f06-a2dd-23d24e7835b0 rootwait rootfstype=ext4 console=ttyS0,115200 console=tty1 hdmi.audio=EDID:0 disp.screen0_output_mode=1920x1080p60 consoleblank=0 loglevel=1 ubootpart=2e9b222d-01 ubootsource=mmc usb-storage.quirks=0x2537:0x1066:u,0x2537:0x1068:u sunxi_ve_me…

Hello, I tried to use the power button on my Rock 4 C+ running Armbian 23.02.2 Bullseye with Linux 5.15.93-rockchip64. It is able to power off. But I can't boot up the controller. When I use the debian based radxa image the button works like expected. I found this at the rk3399-rock-4c-plus.dts of the radxa kernel. &rockchip_suspend { status = "okay"; rockchip,sleep-debug-en = <1>; rockchip,sleep-mode-config = < (0 | RKPM_SLP_ARMPD | RKPM_SLP_PERILPPD | RKPM_SLP_DDR_RET | RKPM_SLP_PLLPD | RKPM_SLP_CENTER_PD ) >; rockchip,wakeup-config = < (0 | RKPM_GPIO_WKUP_EN | RKPM_PWM_WKUP_EN | RKPM_U…

Hi all! Sorry about my English. I just started learning Armbian. Please don't scold me for my ignorance. I have an Orange Pi 3-lts. I installed an "Armbian_23.02.2_Orangepi3-lts_bullseye_current_5.15.93" OS on it. Transferred everything to EMMC. Installed Clipper. I started experimenting with the rotation of the display. (everything seems to have turned out as I wanted!) But damn! Wanted more! I wanted the startup process log to not be displayed on the screen when the OS was started. I read somewhere on the Internet: change in armbianenv.txt console = botn on console = serial. I listened and changed. And now I can't manage my OPI. I can't connect via terminal b…

Can someone please help me? I have a banana pi M3 board, and once got an Armbian image in this site https://www.armbian.com/bananapi-m3/ , and loved it! used it for a year, then my SDCARD have an issue, when i came to get the image link again all the links disappeared from the page, these images arent availble anymore? can someone please help me find an armbian image for bananapi m3 again?

Hi, I am a Grade 12 STEM Student, and right now I need someone's help on our Investigatory Project. Can someone help me on how to connect screen saver (turns off automatically when snoozing) and turns on when PIR Sensor detected something so that It saves power when not used. And I also need to know how do I connect it to the Smart TV because our project is basically an Interactive Board (The thing that you can find around malls which you can use to know specific locations around the mall.) What I have: 1. Orange Pi 2. PIR Sensor 3. Smart TV What I need: 1. A step-by-step procedure on how to do it. 2. What commands/codes to input (Right now, we are u…

im using hdmi and connected op lite to my tv, but there is no sound

Dear members My odroid c2 don't restart. I found this command in the forum: apt install linux-image-edge-meson64 linux-dtb-edge-meson64 linux-u-boot-odroidc2-edge Can i use it for odroid c2? What will be installed?

on orange pizero ,i installed pm-utils and with the pm-suspend command i put it in suspend . If I try to wake it up , with etherwake or other WOL programs (which send magic packets in LAN to the pizero's macadress) the pizero will not wake up . Do you know any tricks?

Hello I'm a newbie and want to start my tour with my odroid c2 for the beginn i want to install a vnc server. So i tried to setup the port 5901 tcp (opoen/free) if i try ufw allow 5901/tcp i get ufw not found if i try iptables -a ........ dport 5901 i get dport not found So my question, is there any firwall on the default system? Thank you a lot

Hi. I was following a tutorial on how to set up my Orange pi PC. I installed this image: RetrOrangePi_v4.3_Armbian_5.97_Orangepipc_Ubuntu_bionic_dev_5.2.14_desktop.img. So I installed it. Everything ran fine and I can navigate the menus. The device I have is very similar to this one, it's a v1.3: https://imgur.com/FN1sBZF The problem is that, when I try to connect to the device using Filezilla it displays the following message: https://imgur.com/1WZI885 Yes the port I used is 22. Password: "PI" or "pi" I only have one ethernet cable, I plug that into the orange pi and I connect my PC using wifi. I've done this before with my Plays…

Hi!, I just bought my orangepi pc and also installed Armbian desktop. I also bought a wifi dongle with rtl8188gu chip. Is there any steps on how to use this to connect to my network?

Hi, Im using orangepi pc with armbian jammy. On download section there is only 2 choices, CLI and Desktop. Is there a custom desktop version where most (or if possible all) applications are not installed? It would take too long is I uninstall it one by one. I think I only need browser and terminal.

Hi all, In armbian-config I have freeze on firmware. I can see that armbian-firmware-full is kept back. Still my kernel got updated. Kind of an issue as I use zfs (backports) on my omv install and I need to reinstall them to get the module recreated... Now I have a few questions: Is it because I have only armbian-firmware-full held back, and apt works in my case maybe with armbian-firmware? (Or do I misinterpret the list that says upgradable on the full) Or do I have to hold the specific versioned packages and will the armbian-firmware (meta?) package hold not work on the ones I have installed and get upgraded nonetheless? Tia

I have an Orange pi 5 (could not find this in the tags list). I have created the Armbian micro sd card successfully I believe. However when I run this I get a long list of command line entries. I complete the enter password/user name entries then I end up at the following command root@orangepi5~# Then everything stops, no desktop just this command. Is it possible to get to the desktop by typing something into this command. As I understand it you should get one single chance to get to the desktop on first run, I apparently have not got this one chance. I believe I am trapped in the command line with no way at all to escape to the desktop. I will be polite and say I find t…

Hello I'm using armbian on a Neo 2 board and I wanted to use a Quectel EM05 or EC25 LTE modem with it. Actually only need the serial port to send AT-commands. My question is, are Quectel modems natively supported by armbian (QMI? MBMI? ), or do I need to add the driver manually and rebuild the image??? Thank you (Yeah, it's a noob question ) Edit: Ok, I connected to modem to the board and realized that a wwan0 interface was created. That's fine, but I actually needed the serial port ttySx in order to sen AT-commands, but there is not one available... that's actually very strange.

$ ip link 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP mode DEFAULT group default qlen 1000 link/ether 68:27:19:ad:02:09 brd ff:ff:ff:ff:ff:ff $ sudo lshw -C network *-network description: Ethernet interface physical id: 7 logical name: eth0 serial: 68:27:19:ad:02:09 size: 100Mbit/s capacity: 1Gbit/s capabilities: ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation …

Hello after some search i successfull attack Ibutton on 1 wire, using ibutton probe my problem is that by default kernel scan for slaves every 10 seconds. Want to change it to 1 second or less if possible. Searching a bit, on some linux distributions this solves the problem: modprobe wire timeout=1 slave_ttl=5 modprobe w1-gpio but since in arbian /arbianEnv.txt take care of modules loaded, it do not work, My current file is: verbosity=1 bootlogo=false console=serial disp_mode=1920x10[D80p60 overlay_prefix=sun8i-h3 overlays=i2c0 pps-gpio uart1 uart2 uart3 usbhost1 usbhost2 w1-gpio param_pps_pin=PA6 param_w1_pin=PC3 rootdev=UUID=6de…

I try to boot Armbian build for Rock Pi Model B but the screen stays black. The Armbian Download Page says for Model SE use Model B builds. Is there a configuration that i can change to make it work. I hope somebody can help me.

I STFW now for hours but didn't find a solution to this: When I login to my new installed OdroidXU4 image of armbian minimal it says: [ Kernel and firmware upgrades disabled: armbian-config ] # armbian-config gives: 'command not found' So I searched for a way, a hint, an instruction how to enable those 'Kernel and firmware upgrades' without having to install 'armbian-config' with no avail. How can I archive this? Thank you in advance; Gerry

I am new to this scene and I was just wondering what the difference is between Sid and Kinetic...

Hi, I am looking for an OS for the BPi M2 Berry. Has anyone good experiences to share? Thanks a lot in advance, Friedrich I tried several OS, flashed with rufus.io No satisfying attempt yet. Last try is this: https://forum.banana-pi.org/t/bananapi-bpi-m2-berry-new-image-release-armbian-bullseye/14451

Hey there fellow Pi enthusiasts! I am absolutely thrilled to have just gotten my hands on the Orange Pi 5, but being new to the world of Pi's and small chips, I was a bit intimidated. However, after exploring this forum, I must say that I am impressed with the amazing work you all have done with the software! I recently stumbled upon the Armbian 23.02 Jammy Gnome and decided to give it a shot. After successfully installing it to my SSD, updating and upgrading it, and enabling 3D acceleration with the commands provided, I thought I was good to go. But something still seems off to me - the graphics just don't seem to be as fast as I thought they woul…

Hello, I've tried nighly because of eth0 Bug with Odroid C2. How can I switch back to stable? Best regards, Stefan

I'm trying to get OctoPrint to work on my Pine64 to control my Qidi i-mate(s) 3d printer. I've done a fresh install of Armbian on the Pine64 with no problems. I'm not sure where to go to troubleshoot the USB-ttl serial connection. I've double checked that the cable is installed right on the Qidi motherboard, this application doesn't need the vcc connected so the other three are. I've tried enabling the UART's in the armbian-config with no luck on the connection. While I've used Linux for quite some time, I'm not familiar with this sort of thing and I'm not even sure where to start the troublshooting. I can easily provide additional logs. This is on an …

I'm using the newest Ubuntu image for my RockPi4C+, and from time to time, I try to login, but it wont allow it. If I reboot, I can login just fine. I tried from 2 devices, both devices could not ssh into the pi. running a cat on /var/log/auth.log doesnt show any attempts at all. After a reboot, I cat the log and can see my login attempts present after the reboot. Its like the sshd service is dying. Mar 17 00:15:01 rockpi-4cplus CRON[1869]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0) Mar 17 00:15:01 rockpi-4cplus CRON[1868]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0) Mar 17 00:15:01 rockpi-4cplus CRON…

Need some help, docker is broken. I used the official docker site to install docker, that was a PITA as the apt hash was mismatching, but I got past that, but NOW hello-world will not run at all. I need someone with more experience to help me look at the logs below: Hello-World: sudo docker run hello-world docker: Error response from daemon: failed to create shim task: OCI runtime create failed: runc create failed: unable to start container process: error during container init: unable to apply apparmor profile: apparmor failed to apply profile: write /proc/self/attr/apparmor/exec: no such file or directory: unknown. ERRO[0001] error waiting for container: …

Hello, i tried to set up a little samba server with armbian on a odroid c2. If i use only the sd card, without any external storage, the system works fine, but if i connect any usb storage to the odroid c2, the system is booting into a bootloop or stops booting If i connect the usb storage after the first bios display, the system boot is fine. I think, the bootloader is trying to boot from the usp storage after detecting this, so is there an option to modify the bootloader, so it is only trying to boot from the pluged in sd card?

Hi, Just did a new armbian build Armbian_21.02.0-trunk_Orangepipc_buster_current_5.10.6_desktop and flashed the image. It works ok but after some reboot times the auto login to desktop is not working anymore and it prompts for user login. Tried quite a few times to re-install but always after a few shutdown and start again cycles it reverts to login prompt and not auto login. Also tried to find a solution in the forum but the files and config involved in previous solutions is no longer valid in the newer builds (/usr/share/lightdm/lightdm.conf.d/60-lightdm-gtk-greeter.conf or /etc/default/nodm). So the questio…

On my Banana Pi M5 Armbian Jammy has a strange device name assignment. BPi-M5 has internal 16GB eMMC normally named mmcblk0 and microSD named mmcblk1. Normally it boots from SD and if you install an OS like Raspberry OS for BPi into eMMC, you're still able to boot from SD another OS because RaspiOS maps device correctly. But when Armbian (i.e. Jammy) is installed into eMMC it changes eMMC device to mmcblk1 and SD to mmcblk0, and It prevents SD to boot. And if the eMMC OS corrupts and doesn't boot the SBC bricks and TTL connection is needed to erase boot record. To change OS it's necessary a command to delete boot record and SD on mmbl…

Hi, I've installed Armbian 23.02 Jammy Gnome from https://www.armbian.com/orangepi-5/ on my new Orange Pi 5. Unfortunately, it looks ugly compared to Ubuntu on my x86_64 PC. The main problem is the irregular use of occasional single-colour icons - for example the trash-can in the dock. Is it possible to make Armbian 23.02 Jammy Gnome not use these single-colour icons, and use Ubuntu icons throughout?

Hi I would like to hear what is the different software alternatives for streaming from a Tinkerboard with a Logitech c922 pro with sound to a cctv controllpanel like blue iris, Shinobi or Home Assistant. I would like for a easy install and setup or just easiest as everything I do seems to take x4 the time of what others do 😅 Hardware & OS OS: Armbian (23.02.2) armv7l Host: Rockchip RK3288 Asus Tinker Board Kernel: 6.1.11-rockchip Packages: 1618 (dpkg), 8 (snap) Shell: bash 5.1.16 Resolution: 1920x1080 CPU: Rockchip (Device Tree) (4) @ 1.800GHz Memory: 575MiB / 2004MiB Logitech c922 pro …

EDIT: I tried to plug it directly in router and speed is OK now. Weird, but it's fine now. Please close this topic. Hello, I just bought Orange Pi 3 LTS to set it up as small off-site backup using OMV and USB HDD. I installed Armbian_23.02.2_Orangepi3-lts_bullseye_current_5.15.93.img on eMMC and installed OMV using armbian-config. I noticed SMB and FTP speeds are slow (around 90 Mbps) so I installed iperf to test it properly and speed is capped on 94 Mbps. I have gigabit switch and interface is connected with GE, if I plug the cable to other device, it works just fine. So there must be some issue on Orange Pi 3 LTS. I searched the internet and speed shoul…

Hello, I'm trying to enable I2C access in U-Boot, for orange PI zero. I've downloaded the Armbian build, and tried to compile with CREATE_PATCHES, exactly like the tutorial here: https://zuckerbude.org/armbian-using-create-patches/ However, the build never stops and waits for me to make changes. I've attached the build log. I *think* I just need to add the following lines to orangepi_zero_defconfig: CONFIG_I2C0_ENABLE=y CONFIG_I2C1_ENABLE=y I guess that would be my next question- is this the proper way to change this config is via CREATE_PATCHES? I tried just changing the defconfig file and re-running c…

Hi. This video (Raspberry Pi 4 RAM Upgrade - Tutorial) is about upgrading Pi RAM from 1GB to 8GB, and it is inspired me to investigate possibility to do this for other boards. If anyone has any ideas and knowledge, please share it with us. I personally interested in NanoPi NEO4 with RK3399 CPU and with 1GB RAM Schematic for looking at RAM and board wiring. RAM consist of 2 512Mb chips on one channel (second channel on this board is not used) RAM Chips: K4B4G1646E-BCMA 4Gbit(4096bit/8=512Mb) DDR3-1866 96Ball FBGA. CPU supports DDR3, DDR3L, LPDDR3, LPDDR4. There are at least 1GB DDR3 chips out there. (not sure about 2GB, and probably no 4GB) …

Hi, today i downloaded the new main branch from git and tried to build my custom board (it works with master branch). After the initial setup i get this after uboot deb creation: Built u-boot deb OK [ linux-u-boot-current-CUSTOMBOARD_23.05.0-trunk_armhf.deb ] error! [ Artifact file /home/sgufa/build/output/debs/linux-u-boot-CUSTOMBOARD-current_2022.07-Se092-Pfebc-B680b_armhf.deb did not exist, after artifact_build_from_sources(). ] Any suggestion?

Hi, I'm compiling a kernel (using 5.8.16-sunxi) for an H3 board that has the RTL8189es chip onboard. But the make fails due to a missing include file. It turns out that the makefile for this driver expects a "src" variable to be loaded with the path for the makefile. But I can't find any defining reference to this variable or any mention in the make documentation that it is an internal function. I've managed to fix this by setting src to srctree and the sub-path for this driver. But this seems very clumsy to me. Can somebody explain how "src" is meant to be loaded and why it's not happening for me ? Thanks, Steven

Hi All! Can anyone help me about rotate de ArmBian logo in startup splash screen? I am working with LCD Display and I want change the logo rotation to portrait mode. Orange Pi PC and Armbian_22.05.1_Orangepipc_focal_current_5.15.43_xfce_desktop.img.xz. Display - 7" HDMI Display 1024 x 600

I am using the Rockpi 4c plus for the first time. I am also trying out Armbian (for the first time) and downloaded the latest stable version for my board (Linux rockpi-4cplus 5.15.93-rockchip64 #23.02.2 SMP PREEMPT Fri Feb 17 23:48:36 UTC 2023 aarch64 aarch64 aarch64 GNU/Linux) Using armbian-config I selected in hardware configuration "spi-spidev". when my board rebooted, I checked the following: dmesg | grep uart This returns: [ 6.120938] dw-apb-uart ff1a0000.serial: forbid DMA for kernel console I then tried dmesg | grep i2c and this returns [ 1.511705] i2c_dev: i2c /dev entries driver [ 1.564824] input: r…

I installed Armbian 23.02.2 aarch64 running kernel 6.1.11-meson64 on Le Potato and the system is running great with xfce4 as the desktop. Once I shutdown or restart, upon restart to the desktop the monitor is clear from the left side to the middle of the screen but the last 1/3 of the screen on the right is slightly fuzzy like the its out of focus. There was no problem of this upon install and first boot of xfce4. I have tried running Armbian Buster image and it works just fine everytime with no issue the entire screen is crisp and clear. For some reason when I installed bullseye it only works once after initial install and setup and then on is fuzzy on the right 1/3 …

Hello, I'm looking to replace my x86 micro tower with a SBC, to mainly use it as a NAS and media player. On the hardware side, I would like to have a native SATA port (for the NAS hard disk), HDMI output and H.265 decoding (media player), at least 4GB of RAM (to be somewhat future-proof). Bluetooth is a plus to play some retro games Not sure about the OS storage: SD card, eMMC, an hard disk on another SATA port? At the moment I found two boards: the Radxa Rock 3A (with its DIY SATA over USB cable) and Odroid HC4. Both are supported by Armbian, but maybe there is a more recent board that I didn't find? Thanks.

Guys, how to setup HDMI display resolution please? This is strange, I waste whole day for seaching working solution

I'm using Banana Pi M2 Zero with Armbian Debian GNU/Linux 10 (Buster). Compiled the image myself with the latest source code using the armbin/build repository. I want to be able to do serial communication on pins 8 and 10. I'm looking for something to appear at /dev/ttyAMA0, so I can communicate with it. I saw some other forum posts which mentioned it'll happen on /dev/ttyS0 , however even that is not happening. The serial communication is working via FTDI (using the USB side connected to the Banana Pi), which indicates there is no problem with the other device. This is what the configuration looks like using "sudo minicom -s". +…

Hello dear armbianites, I'm trying to make the hc1 optimization for the odroid HC2 board permanent, every time the kernel is updated, armbiam loses the optimization and an admin action is needed to apply the optimization again via ambianconfig > System DTB > optimized board configuration, followed by a reboot. My Odroid HC2 suffers from temperature sensor problems, which can be easily bypassed. But I avoid restarts of this server which hosts an OMV instance for personal needs. I understand that the /boot/armbianEnv.txt file passes the information to /boot/boot.ini, but this file seems to be overwritten when the kernel is updated! is t…

Hello all! Noticing a problem with the latest versions of armbian (I'm using the files avaliable here. In particular I was using the "bullseye_current" image however I also tried some of the files in the archive. Unfortunatly wifi dosen't seem to be quite 100% in these images -- I'm unable to connect to the internet via wifi and I'm also finding the m2 zero can barely find any wifi devices at all. I did notice these errors though; [ 8.565750] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43430-sdio for chip BCM43430/1 [ 8.588984] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43430-sdio.sinovoip,bpi-m2-zero…

I am creating a script that can backup sd-cards running on the system, resizing it with desired value or via resize2fs calculated. I learn a lot but there are a few things I don't fully understand. When I create a backup I dd what I understand is the bootsector, ie I grab the "start" position of the partition I am backing up with fidisk and use that value and a blocksize of 512. I then add another 10mb (in bytes) just to be sure. Usually the bootsector is 8192 big, but not always (IIRC nanopi neo3;s is WAY bigger). dd bs=512 count=$DDBOOTSECTOR if=/dev/mmcblk0 of=$IMG_FILE conv=noerror,sync status=progress I then truncate the file, calculated eithe…

Excuse my ignorance all but I'm not familiar with this type of thing. I got my OP 4 lts running with the latest jammy HOWEVER, the resolution is wrong for the 5" HDMI screen I'm using, The screens touch function is not working, and I can't SSH into it via wifi because I can't seem to find what port it is on. If any of you can help me out here, I'd appreciate it.

Does anyone know of an ARM-based single board computer that stores its boot firmware in SPI flash and has write protection mechanisms (e.g., screws, pins, jumpers, etc.) for said SPI flash? The ROCK 3A has something like it, but I don't think the mechanism uses an SPI flash chip's intended WP control pin.

I have recently managed to get SPI boot to USB SSD working on my Odroid N2+. However, to get there, I had to manually set setenv rootdev "/dev/sda1" in my /boot/boot.cmd With that set, SPI boot works. However, obviously I should not set it manually there, and the setting gets overwritten by armbian-config. My understanding is, that I should let boot.cmd unchanged (rootdev "/dev/mmcblk0p1") and armbianEnv.txt should do its magic, but the rootdev setting in armbianEnv.txt is simply ignored upon SPI boot and it fails to boot, as it tries to load the root fs from SD card... Any pointers, what might go wrong here or …

This week I installed Armbian on three BananaPi M5s. The OS ran fine from SD card, but once installed to emmc (using armbian-config) the system booted with a message that the file space available was zero. In the case of one of the boards I found an 8GB .img file in /media/my userid/. I assumed it was a copy of the 8GB SD card, and I deleted it. The system is fine now. But in the case of the other two I have yet to determine what is consumbing all the file space. There are two empty directoris in /media (mmcboot and mmcroot). Any idea what is causing this and more importantly how to fix the two existing systems? Thanks, Paul

Hi, I've already installed Armbian once before onto the SD card of my Rock PI S (Non-flash version). Before upgrading to Focal, I plugged it into my serial receiver in order to verify that I got the procedures correct so when I upgrade I'd get a console. I was glad I did that as I had forgotten I couldn't get screen(1) to work with my serial device as it can't send and receive data at the 1.5Mbs. I ended up using minicom(1). I downloaded the Focal Edge version of Armbian, verified the data with the ASC key, and wrote it to the Micro-SD card. I then booted it and the blue LED started blinking indicating an alive and working kernel. But I got no data over the…

I just installed armbian buster on my NAS (odroid HC2). Everything works perfectly. However, as debian bullseye has become stable and I expect this to happen for armbian also in the near future, I am thinking about how to do the upgrade. This is mainly because all my other boxes run bullseye and administration becomes a lot easier if all systems run the same version. In addition, I will have to do the update anyways at some point in time and therefor I want do it when armbian bullseye becomes stable. Reading through the forum I found out it is not supported. However, I am using debian now since woody and have done a lot of upgrades since then, I th…

Hello I wanted to post on here regarding a new project we have been working on called SimpNAS. Its similar to OpenMediaVault or FreeNAS but simpler and more basic. Its currently in Beta but we are looking to have a stable release by the time Kobol ARM NAS gets released. It can be installed on armbian devices as long as it has two hard drives one for the OS and one for Data. For example we have it installed on an ODroid HC2, but can be installed on any PC. Feedback will be greatly appreciated. Check it out here https://simpnas.com Thanks for looking

Few years ago I setup armbian with 5.4.85 kernel. now try to update from instructions: sudo apt update sudo apt upgrade sudo armbian-config System->Other and got "No other kernels available!" Googling this error didn't help, and worst that I can't now install kernel headers Is there some update to current kernel (5.15) from bash? or linux build in common

Hey there! I'm trying to create an image with Debian Bullseye using Debos and Armbian. My board is an Orange Pi PC H3. I am following this step guide to generate the image, but I'm having problems to read serial. The tutorial that I follow was created for Orange Pi Zero +2 H5, so I change the architecture for armhf. When I boot the image I don't have any file named "armbianEnv.txt". This file should be already there? Or I have to create it? Some idea about what can be the problem? Just for test I create this file with some parameters that I found, but still not working.

Hello. Connected via PuTTY. I'm trying to connect to WIFI and I get an error: Connection activation failed: (53) The Wi-Fi network could not be found. Further, all Wi-Fi networks disappear, appear only after a reboot.

Any patch files I put in build/userpatches/kernel/archive/sunxi-6.1/ are applied correctly, however I cannot disable an Armbian patche. When I put a blank file in userpatches the original patch file remains active. I'm trying to disable: patch/kernel/archive/sunxi-6.1/patches.armbian/arm64-dts-sun50i-h6-orangepi.dtsi-Rollback-r_rsb-to-r_i2c.patch I put a blank file in: build/userpatches/kernel/archive/sunxi-6.1/patches.armbian/arm64-dts-sun50i-h6-orangepi.dtsi-Rollback-r_rsb-to-r_i2c.patch I've also tried putting a blank file in:- build/userpatches/kernel/archive/sunxi-6.1/arm64-dts-sun50i-h6-orangepi.dtsi-Ro…

I have a 8811CU WiFi dongle that failed to work on my Nanopi Neo. When connecting using nmcli, I get this error "Error: Connection activation failed: (7) Secrets were required, but not provided." The device is correctly recognized and I can perform iw scan without issue. I tried with 6.1.7(edge) and 5.15.89(current) kernel, and install the driver from https://github.com/morrownr/8821cu-20210916, all end up with the exact same error. Here's the journal log where "nl80211: kernel reports: Authentication algorithm number required" error stands out. Feb 14 13:51:55 nanopi-neo NetworkManager[513]: <info> [1676400715.4565] audit: op="connectio…

Hello, When we install armbian cinnammon, the eth0 ip is set default to 192.168.0.8. I cloned the installation and then the cloned conflicts with the source so I though to use armbian-config to change the IP adress. The ipv4 changed but I noticed warnings in/var/log/syslog : IPv6: eth0: IPv6 duplicate address.. It seems armbian-config does not update ipv6 or? What should be do, disable ipv6? I read it is not recommended at all.

Hello I am new to the Pi-computers and was searching in the forum and the internet if i can find a solution to my problem but can't find any. So maybe you can help me. I'm using a BananaPi m1 with a 7" HDMI touch screen running armbian with GUI. Its ruuning fine with one little issue: When the system is temporary unused the screen should turn off/go to standby after a few minutes to save enery. The screensaver setting is working but with my BananaPi the scree just goe black but does not tunr off. If I connect the same screen to a Windows Computer the screenturns of with te screen saver. Any ideas what I can do to get…

Good afternoon, I run Armbian bullseye on my orangepi zeroplus2-h3. My wifi hotspot causes the OS to reboot sometimes, with the error "xradio WSM-ERR: bh error!>>> 0x0012 (16)" I use the NetworkManager conf files below for my wifi hotspot. echo """ [connection] id=mywifi uuid=58356325-7da4-4d1d-ad6b-54f33bfee335 type=wifi autoconnect=false interface-name=wlan0 permissions= [wifi] band=bg mac-address-blacklist= mode=ap ssid=IQLINK-1 [wifi-security] key-mgmt=wpa-psk psk=123456789 [ipv4] address1=192.168.43.1/24 dns-prior…

I have this small 64bit H6 orange pi and SSD connected via USB, runs "Armbian 22.11.4 Jammy". Now I am trying to move /home and /tmp to the USB mounted drive to save RAM and move lots of writes from an SD card to a bigger and more capable external SSD. I uninstalled overlayfs, disabled tmp.mount and whatever there was with "tmp" in the service name. aik@hass:~$ cat /etc/fstab UUID=ecc7fb6d-12ab-41b9-b11a-c2c9b78e3bd1 / ext4 defaults,noatime 0 1 /dev/sda2 none swap defaults 0 0 /dev/sda3 /mnt/sda ext4 defaults,sync 0 0 /dev/sda4 /tmp ext4 defaults,sync 0 0 aik@hass:~$ cat /proc/cmdline root=UUID=ecc7fb6d-12ab-41b9-b11a-c2c9b78e3bd1 rootwait rootfst…

Hey guys, I am pretty new to this. I am working on turning my Le Potato into a TV shuffler. I have decided to go with Armbian, since I can't SSH (which is required for the CoreElec method), because I use college internet, and it just isn't configured properly. I am currently trying to get a script going that will open a folder and begin randomly playing videos from within, but I cannot figure out where to start really. I think I need to import mpv into the script somehow, but I honestly cannot find any resources on how to do this. Any help is appreciated, thanks in advance.

Hello here, I thank you in advance for coming here. I have gotten an Orange Pi Zero 2 H616 yesterday, and I wanted to install Docker as Rootless on the ARMBian Bullseye image, but It is failing every try I do to actually bring it up. It always gives the following message in Journalctl: docker.service: Start request repeated too quickly. I just wanted to ask if anybody has actually found a way to deal with this. Alternatively, I cannot boot any kernel higher than the legacy 4.9 kernel given on the main page, all the others give no feedback when the board connects to the current. I am pretty sure I am missing something, but I found no info …

Hello everyone I would like to set the monitor sleep time from the terminal. on Banana pi M1 with Armbian. You can help me ??

Hello everyone! I recently heard about running x86_64 programs on ARM using box64, and decided to give it a try. I get the impression that most people are just using it for games but I would like to use it to run Quartus (a program to work with Intel FPGAs). The issue I see is getting the USB drivers to work. Quartus includes drivers for several programming cables (I am only interested in the USB blaster cable), and as far as I know there are no drives available that run on ARM. Is there any hope at all of getting the x86 drivers to work on ARM? Thanks in advance.

Booting first time my device works fine but after apt update & upgrade always appears an error opening Firefox