Allwinner sunxi

Hello, does this USB WiFi card work with armbian on Orange Pi 3 LTS? TP-Link Nano AC600 USB Wifi Adapter https://www.amazon.com/dp/B07PB1X4CN/ Does it need any drivers to be installed? If yes, is there any that is working with OPi 3 LTS? Btw I want to use this wifi adapter, because Armbian doesn't work with internal wifi card in this SBC - https://forum.armbian.com/topic/23505-orange-pi-3-lts-no-wifi/ (and sadly Devs didn't release a fix for it)

Hi, I try to install Armbian Bulleye on my Nanopi Neo Plus 2. Well it completed the install, but when it reboot, I keep getting kernel panic. I try installing with the official Friendly Arm image (kernel 4.14 though) and it was fine (both on SD card and EMMC). Below is the serial console dump, also it seems to crash in random places too. Any help will be greatly appreciated. =~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2022.12.09 21:53:09 =~=~=~=~=~=~=~=~=~=~=~= U-Boot SPL 2022.07-armbian (Nov 30 2022 - 10:43:13 +0000) DRAM: 1024 MiB Trying to boot from MMC1 NOTICE: BL31: v2.6(debug):af220ebb-dirty NOTICE: BL31: Built : 10:4…

I am getting a quite loud audio spike / noise sound at the end of an audio play in python when using the following script: https://gist.github.com/bbence84/04d1935a92a4b4ab3d44bf182ea4bcc1 Wav to be played, but it does it with any other wav or mp3 file: https://easyupload.io/vbat12 It uses the speech_recognition package and the preferredsoundplayer package, but also the VLC python package shows the same when playing the audio. When changing the audio play to be non-blocking for the python script, the issue goes away... Very strange. This is driviging me nuts. I'm on Armbian 22.11.1 Jammy / 22.04.1 LTS, kernel 5.15.80-su…

Hello friends, I installed the latest version of ARMBIAN compatible with ORANGEPI 3 LTS. But on the login screen, the username and password fields are pixelated, change color unstable when moving the mouse or trying to enter the password. This error only occurs on the login screen, once the desktop starts everything is normal. Thanks for your help.

Hi , I am trying to install headers on my orang pi using command #apt install linux-headers-$(uname -r) getting the following message Reading package lists... Done Building dependency tree Reading state information... Done E: Unable to locate package linux-headers-5.4.27-sunxi E: Couldn't find any package by glob 'linux-headers-5.4.27-sunxi' E: Couldn't find any package by regex 'linux-headers-5.4.27-sunxi' could someone help me in how do I install headers ?, I am trying to comiple a kernel module. thanks

Hello, dear members! I built the mainline kernel 6.0.8 using the config-5.15.80-sunxi64 config, but when I try to boot the system hangs on Starting the kernel. Boot log: U-Boot 2023.01-rc3-00069-g93685d0dcb-dirty (Dec 19 2022 - 11:31:13 +0300) Allwinner Technology CPU: Allwinner H6 (SUN50I) Model: OrangePi 3 LTS DRAM: 2 GiB Core: 50 devices, 14 uclasses, devicetree: separate WDT: Not starting watchdog@7020400 MMC: mmc@4020000: 0, mmc@4022000: 1 Loading Environment from FAT... Unable to use mmc 0:1... In: serial@5000000 Out: serial@5000000 Err: serial@5000000 Net: No ethernet found. Hit any key to stop autoboot: 0 switch to partitions #0,…

need help to drive Orangepi pc plus with waveshare 3.5inch display with xpt2046 touch driver. OS:- Armbian 22.11 Jammy XFCE Desktop version Kernal :- Kernel 5.15.y link for the os :- https://www.armbian.com/orange-pi-pc-plus/ link for display :- https://www.waveshare.com/3.5inch-hdmi-lcd.htm can any one help to drive touch screen you can message if you need more information,

Hello, please help I moved ARMBIAN 5.60 stable Debian GNU/Linux 8 (jessie) 3.4.113-sun8i from 2Gb SD to 16Gb and cant do resize i tried everthing from others topics but it does not work anymore! (i need 3.4.113 for acpid) I put this scipt into /etc/init.d but it does not work sudo sh ./resize2fs start [....] Starting resize2fs (via systemctl): resize2fs.serviceJob for resize2fs.service failed. See 'systemctl status resize2fs.service' and 'journalctl -xn' for details. failed!

I don’t own banana pi but I’m thinking of buying it for the project we’re going to do. I have raspberry pi zero but mediapipe is not working. Can I install this library on m2 zero? I would be glad if you help. Thank you.

Hello, In a GOLANG based, RPi 3B+ project I am using the https://github.com/stianeikeland/go-rpio package to read the state of the GPIO-s. I am planning to set up some Banana Pi M2 Berries with the same software. The package - as it was expected - doesn't work with the M2 Berry. I could adapt the package for the Berry, but I don't know which peripheral chip is used in it. Does anyone know which peripheral chip is used in the Berry? (The schematic diagram on BPI's page is useless). Thanks, G.

Trying to run mainline kernel on allwiner V3. U-boot: compiled and successfuly runs with some patches. After starting u-boot, I'm loading dtb and kernel into memory and trying to boot the kernel, but nothing happens. I need any help to solve a this issue. Скрытый текст diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 43951a7731..af7d16076a 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -693,6 +693,7 @@ dtb-$(CONFIG_MACH_SUN8I_V3S) += \ sun8i-s3-elimo-initium.dtb \ sun8i-s3-pinecube.dtb \ sun8i-v3-sl631-imx179.dtb \ + sun8i-v3-dv8000-imx179.dtb \ sun8i-v3s-licheepi-zero.dtb dtb-$(CONFIG_MACH_SUN50…

I don't own banana pi but I'm thinking of buying it for the project we're going to do. I have raspberry pi zero but mediapipe is not working. I'm thinking of doing image manipulation and this is the most important library in my code. That's why I'm trying to do a detailed research because my budget is limited. Thank you for your help 💯

Hi, I tested my board with below armbian distro. Question is , there are lots of entry about H3 hw decode problems, are these fixed in this distro? When i open 1080p mp4 Big Buck Bunny video still doesnt work is that any specific settings to work with hw accelerated decode. How can i be sure that hw decoding is running with VLC? or any specific ffmpeg command. Linux orangepipc 5.10.60-sunxi #21.08.1 SMP Wed Aug 25 18:19:32 UTC 2021 armv7l armv7l armv7l GNU/Linux I tested video with - VLC using 55% cpu - MPV using 40% cpu Umit

After a clean install of 22.11.1, I edit /boot/armbianEnv.txt to add: overlay_prefix=sun8i overlays=uart3 i2c0 spi-spidev param_spidev_spi_bus=0 and reboot. After the reboot I list the /dev files of interest and there is/are no "spi*" entries: pi@orangepipc:~$ ls /dev/i2c* /dev/spi* ls: cannot access '/dev/spi*': No such file or directory /dev/i2c-0 /dev/i2c-1 pi@orangepipc:~$ Not sure if it makes any difference but I only have power, HDMI, and RJ45 connected to the board at this time, and nothing connected to the GPIO pins. Below are the states of two files, one from which I got the BOARDFAMILY, and …

Hello everyone, I am using Orange Pi Zero LTS 512MB (H3 Cpu) hardware. As an image; I am using "Armbian 22.08 Jammy Kernel 5.15.y, Updated: Sep 24,202". The MAC address changes every time the Wi-Fi is turned on. I tried several different images. I tried a few simple fixes posted on the forums, but only managed to fix it for ethernet. But it was not successful for Wi-Fi. I need an image or solution that does not change the MAC address. Is there anyone who can help with this?

I have several OpiOne Plus boards. They differ by the date of manufacture (let's say 1st batch and 2nd batch) 1st batch: Works with kernel 5.10.x but does not boot kernel 5.15.x. Red light is on, power meter shows very little consumption, ethernet does not go up. Switching to last available 5.10.x kernel resolves the situation. 2nd batch: Successfully work with both 5.10.x and work with 5.15.x. Green light is on, power meter shows adequate consumption, board works. I'm pretty sure, that no more "new" opi one plus will appear at Xunlong shop and this issue won't be fixed in visible future. But well.. How I can "freeze" kern…

Hello! I try to connect to OrangePiPC by serial console. I tried using UART1 (add overlay & switch console to ttyS1), UART3 (ttyS3) and ttyS0 (debug port). But always I can see output (with kernel or ) but on my host computer (ubuntu 20.04) I see login prompt and can't enter anything. I tried change speed but not login. Even when I stop serial-tty@ serivice and start minicom without luck. Can you help me?

Hi everyone, Since i update to kernel 5.15.25-sunxi , every reboot the mac of wlan0 changed the mac address and router giv him another ip. i will be very happy to solve this issue , Thanks! Note: I tried to re-download the ARMBIAN from the official website, and burned a new SD. This experience did not help. First boot: Second boot:

Hello! I try use UPort 1150 on my OrangePIPC+ board, but got error misiing firmware. After lookup I check that this files was missed, so I copy from RaspberryPi4 board (with Armbian 22.04) moxa folder & ti_3150.fw, ti_5052.fw. Then after reboot all work ok. So, is this that I missed in configuration or this is a bug? Regards, Alex

Hi: I use orange pi pc to build a little chromium kiosk for showing some static information(like temperature). most things are fine. but there is a electronic scroll bar which is not running smooth. I check my current environment (armbian 22.08 with ubuntu 22.04) that I am running xorg with fbdev driver. I wonder if there is other things I can try for the hardware? I search the forum and I found there is "lima" driver, but I don't know if I am using it or not. I can see "lima" is loaded via "lsmod" but am I using it currently? I hope the orange pi pc can do better with newer driver. if not, what's the next armbian pi I should buy to get better chromium experienc…

Hi all, I'm working with a BPI-P2 board. I installed the last Armbian version for BPI-M2 as the two boards are basically the same except the RJ45 connector and the eMMC. I installed it on an SD card, and everythig worked perfectly. Now I need to put the OS on the eMMC and then completely remove the SD card, but I'm struggling. The default Armbian for BPI-M2 is not intended to support eMMC, so I'm not surprised that with this version the eMMC dosn't show up. So I tried to modify the dtb and enable the eMMC nodes, and then reboot. Here the changes I made: mmc@1c10000 { reg = < 0x1c10…

Hello, despite using several threads (links below) and one whole week of work, either nothing or only backlight of my display work. Could anybody provide the forum with an image or .debs, please? Or step by step tutorial (adapting existing tutorials) didn't work for me. Thanks https://forum.armbian.com/topic/7233-bananapi-pro-7-touchlcd-with-debian-buster-and-mainline-kernel-5xxxx/ https://forum.armbian.com/topic/14560-sun4i-drm-and-lcd-panels/ or

Hi, We are using trying to use Banana PI M2+ for our application , we mainly use UART and Ethernet on module. uname -a details are below. Linux bananapim2plus 5.15.74-sunxi #22.08.6 SMP Tue Oct 18 07:00:33 UTC 2022 armv7l armv7l armv7l GNU/Linux We Enabled UART 3 by adding below command line on /boot/armbianEnv.txt as overlays=uart3 Pin Number: 8 & 10 We can able to transmit and receive data for uart3. We need to enable one more UART to communicate, We tried overlays=uart2 , We failed to enable, Can anyone guide us to enable one more UART in Banana pi M2+ Regards, …

Hello all, I setup an orangepi plus2 with Armbian_22.08.2_Orangepiplus_bullseye_current_5.15.69.img I follow tuto and it worked with boot on SD card. I run nand-sata-install Then, I reboot. I was in safe mode and try format emmc Then I reboot again Since, I have only green light. I connect to COM port and see that : U-Boot 2022.07-armbian (Sep 21 2022 - 18:37:27 +0000) Allwinner Technology CPU: Allwinner H3 (SUN8I 1680) Model: Xunlong Orange Pi Plus / Plus 2 DRAM: 2 GiB Core: 65 devices, 18 uclasses, devicetree: separate WDT: Not starting watchdog@1c20ca0 MMC: mmc@1c0f000: 0, mmc@1c10000: 2, mmc@1c11000: 1 Loading…

We flash hundreds of Orange PI 3 LTS boards with stock Armbian Debian Bullseye via nand-sata-install to install it on the onboard eMMC storage. Some boards after running for a week or more would randomly give this error and fail to boot: Begin: Running /scripts/local-block ... done. done. Gave up waiting for root file system device. Common problems: - Boot args (cat /proc/cmdline) - Check rootdelay* (did the system wait long enough?) - Missing modules (cat /proc/modules: ls /dev) ALERT! /dev/mmcblk0p1 does not exist (initramfs) We can turn the board on and off as many times as we want, the error persists. We can fix the problem by booting it fr…

Hi to everyone, I configured Network Manager to have a local-link connection (eth0-ll) as DHCP fallback (eth0-auto). When I do the following: Connect Orange Pi in a net without DHCP, obtaining a local link address Unplug ethernet cable Plug another ethernet cable connected to a network with DHCP If step 2 and step 3 are executed rapidly, the Orange Pi doesn't detect the network switching and eth0 keeps its local-link address. When I perform such steps slowly, Orange Pi detect which ethernet cable is not plugged in and then everything works as expected. How can I increase the refresh rate of …

I have a working BPi M1 with [ 0.000000] Linux version 5.15.25-sunxi (root@d72d155687c7) (arm-linux-gnueabihf-gcc (GNU Toolchain for the A-profile Architecture 8.3-2019.03 (arm-rel-8.36)) 8.3.0, GNU ld (GNU Toolchain for the A-profile Architecture 8.3-2019.03 (arm-rel-8.36)) 2.32.0.20190321) #22.02.1 SMP Sun Feb 27 09:23:25 UTC 2022 Due to inconvenient USB placements, I thought using OTG micro USB (the one right next to the SD slot), but it doesn't seem to be operational. I bought a Micro USB Male To Female OTG Adapter Cable, but the attached devices are not detected neither connected to OTG port, nor to the normal power-in micro USB connector (lo…

Hello. I'v recently tried to update by old orange pi zero to latest armbian and it does not boot. Serial console is dead silent. I'v tried different armbian releases, sdcards, but result is the same. However card with old boots perfectly fine. Image orangepizerolts also works, but it has huge overheating problem. I'v tried to flash uboot to spi, but it does not boot either. Sadly old uboot did not worked with latest armbian. Any idea?

Hello, I have installed ARMBIAN 5.60 stable Debian GNU/Linux 9 (stretch) 4.14.70-sunxi on a Banana Pi M2+ and I need to read and write to the GPIO pins from a bash script, does anyone have a workable solution? I tried with an Orange Pi in the past and I compiled a binary to access the gpio values but it did not work and I cannot find that source any more. Thanks in advance.

Hello, first post here, so sorry if did not provide enough information. I need to change spi buffer length to 8192. So far tried: 1) modprobe spidev bufsiz=8192 creating the file /etc/modprobe.d/spidev.conf and adding to it the line "options spidev bufsiz=8192" When I do "cat /sys/module/spidev/parameters/bufsiz", it gives me "4096". 2) Add to /boot/cmdline.txt: spidev.bufsiz=8192 When I do "cat /sys/module/spidev/parameters/bufsiz", it gives me "4096". 3) cd /sys/module/spidev/parameters chmod 666 bufsiz echo 65536 > bufsiz did nothing. 4) /boot/armbianEnv.txt added options spidev …

Hello. Can't run x11 on Debian 11. I am using Nano Pi AIR (Allwiner h3). Since the board is not officially supported, I built the image on debian 11 myself. root@nanopiair:/# uname -a Linux nanopiair 5.15.44-sunxi #trunk SMP Wed Jun 8 08:41:04 UTC 2022 armv7l GNU/Linux The LCD is connected via SPI, chip is ili9486. Device tree file has been created, I can see the loading process and the console on the screen. I'm trying to start the X-server by "startx" from ssh session, but for some reason it ends immediately after the start. I tried using fbdev or fbturbo as driver. I also tried to remove the config with the driver in general (section "Devi…

Hello, I've been running Armbian for a while on an Orange Pi Zero without any issue. Every now and then I perform an apt update && apt dist-upgrade on that board but today the upgrade process failed with the following error and I'm not sure how to fix it. renaud@AnetA8:~$ sudo apt update && sudo apt dist-upgrade -y Hit:1 http://ports.ubuntu.com focal InRelease Hit:2 http://ports.ubuntu.com focal-security InRelease Hit:3 http://ports.ubuntu.com focal-updates InRelease Hit:4 http://ports.ubuntu.com focal-backports InRelease Hit:5 http://armbian.hosthatch.com/apt focal InRelease Reading package lists... Done Building dependency tree Readin…

Armbianmonitor: http://ix.io/4cYv Hi I'm trying (and failing miserably) to achieve a simple goal with my Orange Pi 3 LTS: to have pin PD15 set as 'output-high' on startup. From reading the documentation, it seems the logical way to go about this task is to create a custom DT Overlay so that's what I set out to do. Based on the Armbian documentation and various examples I found online, I created the following sun50i-h6-gpio-pwr-status.dts file under /boot/overlay-user : /dts-v1/; /plugin/; / { compatible = "allwinner,sun50i-h6"; fragment@0 { target = <&pio>; __overlay__ { gpio_pwr_pin:…

I would like to set a GPIO to output-high during the boot. In this case, the GPIO is PG0 whose number is 192. The device tree overlay is /dts-v1/; /plugin/; / { compatible = "allwinner,sun50i-a64"; fragment@0 { target = <&pio>; __overlay__ { gpio_out_override_hog { gpio-hog; gpios = <192 0>; /* PG0 */ output-high; line-name = "PG0-gpio-hog"; }; }; }; }; However, after the application and reboot, I do not see any init information in "/sys/kernel/gpio" about GPIO 192. There is no "/sys/class/gpio/gpio192" folder existed after boot either. Is there anything wrong in the overlay file?

Hello, I have an orange pi plus 2 device. but Armbian 5.69 (5.75 or latest version) above Orangepiplus Ubuntu xenial default can be the url for desktop version. Can you please give me the working url? (By the way, I couldn't find a section for orange pi plus 2 in the forum. )

I had to reapply u-boot image. So, I did it by armbian-config and later by "dd" command. In both situations this is failing (please see u-boot messages printed by serial). I was restoring the image (I have backup images of my SD card) and trying again. What may be the problem? I had linux-u-boot-orangepi*-current 22.08.6 installed. As below - please note Verifying Checksum ... Bad Data CRC BTW. I tried the same on Orange Pi PC and Orange Pi Zero - the same result (fail to boot). => version U-Boot 2022.07-armbian (Oct 18 2022 - 07:35:20 +0000) Allwinner Technology arm-none-linux-gnueabihf-gcc (GNU Toolchain for the A-profile Archite…

Hi, I am stuck integrating IR in my board banana pi m2 zero. Can anyone guide me to setup IR?

fb_st7789v spi driver not getting on orangepi pc plus in 5.15 kernel in following issue SPI driver fb_st7789v has no spi_device_id for sitronix,st7789v

trying to monitor a button press on GPIO19 which has an offset 40, but getting the error in the title. Switched between kernels but made no difference. http://ix.io/4cFr After switching the kernel http://ix.io/4cGd Not sure if this is related, but might help with the troubleshooting https://archlinuxarm.org/forum/viewtopic.php?f=65&t=14423

Can you power Prime with OTG port? Or does only PSU work?

Hello, I have a problem with uboot, during its scan of USB buses, it blocks for several tens of seconds, displays an error, then boots. Sometimes it blocks completely and it takes several ON/OFF attempts to get it started. I'm using Nano Pi Core LTS with the mini-shield, I have over 20 and it's happening on all of them. This is what is displayed when it finally starts : U-Boot SPL 2020.10-armbian (Aug 08 2021 - 15:18:24 +0200) DRAM: 512 MiB Trying to boot from MMC1 U-Boot 2020.10-armbian (Aug 08 2021 - 15:18:24 +0200) Allwinner Technology CPU: Allwinner H3 (SUN8I 1680) Model: FriendlyARM NanoPi NEO DRAM: 512 MiB MMC: mmc@1c0f000: 0, mmc@1c11000: 1 Loa…

Hi to all, I have been using banana pi pro and m1 for some years as mini PBX with asterisk, due the stop of bananian's development that works perfectly but now is obsolete and vulnerable, i'm testing armbian but registered prompt audio sounds choppy and i can't find reasons, I tried to move files in ram disk, use usb to lan interface, increase process priority, use performance ad cpu governor, also tried Armbian 5.83 Bananapi Debian stretch next, same problem. Any suggestion ? Thanks advance.

Hi all. I installed the latest Armbian on a OPI PC Plus that I have. I want remote desktop and console Desktop. As soon as I install tightvnc the console desktop wont login anymore. I get a pasword box and as soon as I enter it the screen will go black and then reset back to the login box. How do I set it up so I can have remote desktop and console desktop. I tried to install remote desktop for Windows RDP also and that also does not work.

/proc/cpuinfo does not list serial number How do I read the chip serial number?

hi guys, i'm using NanoPi neo core using a battery and a volt booster. and I want to control the voltage booster to turn off all peripherals to conserve power and prevent battery drainage. I figured there's a PWR-LED pin connected to GPIOL10, which turns off when the system shut down. is there a way to map another GPIO in the same way so i could know when the system has shut down - so it will be safe to cut power off? thank you so much.

Hello. I need to set a low level on a gpio pin PA6 on boot. I'm trying to do this through the device tree: /dts-v1/; /plugin/; / { compatible = "allwinner,sun8i-h3"; fragment@0 { target = <&pio>; __overlay__ { pinctrl-0 = <&pull_pins>; pull_pins:pull_pins { pins = "PA6"; function = "gpio_out"; bias-disable; output-low; }; }; }; }; I need to set PA6 to low. After boot, I see my overlay in device tree, but the level on the PA6 is still high. I can easily control the level through libgpiod (gpioset gpiochip0 6=1 or gpioset gpiochip0 6=0), it works. But I ca…

Hello fellow Armbianers! I'm using Orange Pi zero. My only complaint is the 30s boot time. Looking at the log files, seems like it only takes 5 seconds to boot once the kernel is loaded. The majority of this 30s is spent in uboot somewhere? Does anyone know how to speed up this boot process? I'm always just booting from SD card, don't need USB boot/network boot, console, or any of that. Thanks!

Hello I have Opi lite 2 + 28byj-48 driver and step motor, and I want to play around, but can't find RPi.GPIO for OPi lite 2, how can I make it work ? I find pretty good example with raspberry pi http://www.raspberryproject.pl/en/automation/28byj-48-stepper-motor-raspberry-pi/ , I rearranged GPIOs to fit my board but I have error: File "testy.py", line 4, in <module> import RPi.GPIO as GPIO ModuleNotFoundError: No module named 'RPi' Welcome to ARMBIAN 5.67.181116 nightly Ubuntu 18.04.1 LTS 4.19.2-sunxi64

I am getting significant graphical issues with most programs on the "Jammy Gnome desktop" version. I also saw similar issues under KDE desktop after clicking a button relating to OpenGL in the graphics settings (and couldn't figure out how to get that dialog back or undo the setting). I would prefer to stick with Gnome, I assume this issue has something to do with hardware/graphics acceleration having an issue, the application launcher seems to be immune from the issue. Sorry, I am quite a noob when it comes to Linux/programming related stuff, I couldn't find any other mentions about similar issues in this forum. The issue happens on both this 5" LCD and an HDMI TV at 4k.

Hi, I want to use LCD on Orange Pi 3 LTS. But there are no fex/script.bin in the boot directory. The LCD pins are given the RGMII Ethernet Interface. I could not configure the device tree for internal LCD output. Could you please explain how can i use LCD on these system ? Good Work.

Hi there, OK, here's the picture: brand new Orange PI 3 LTS, made SD card with Armbian 22.08 sid - didn't boot; made SD card with Armbian 22.05 Jammy - still the same result. The result: [ 0.000000] Boot CPU: AArch64 Processor [410fd034] [ 0.000000] bootconsole [earlycon0] enabled WARNING: Unimplemented Standard Service Call: 0xc0000026 and on top of that, upon first boot Armbian copies itself to the eMMC? Because after removing the SD card, I was able to get the same result with just plugging in the power (it boots from eMMC...?). As far as I remember, I didn't see any similar behavior described in the documentation. …

Hello, I am using the Armbian 22.08.2 Jammy with Linux 5.15.69-sunxi. When I issue "aplay /usr/share/sounds/alsa/Front_Center.wav" or "speaker-test -t wav" playback misses a few seconds from the beginning of the audio file. If I restart it immediately, I can hear the file playing correctly. Then I wait for a while, run it and the problem reappears. I read on this forum that people have had the same problem for years without finding a solution. Is there a solution or does anyone wise know what the problem is?

Hello, I own several Orange Pi 3 which I bought at different times. The last batch couldn't run the firmware I used previously: the ethernet was broken. So I suspect there is a new ethernet chipset on it. Current Armbian (Armbian_22.08.1_Orangepi3_jammy_current_5.15.63) works on both types. How could I differentiate the chipsets from the command line? Thank you

Hello, on a fresh install (Armbian_22.08.1_Orangepi3_jammy_current_5.15.63), the ethernet eth0 interface doesn't retrieve any IP. Here comes the kernel ethernet related messages: After that, I have launched a dhclient command that took several minutes to stop. Then, an APIPA address is attributed to eth0 nterface. So I have launched armbian-config to set the eth0 to static. And it worked. But how to make DHCP works? Thank you PS all others devices on my network can retrieve an IP by DHCP. I also tried others OS on my Orange Pi 3 boards and the…

Hello all I want to control some GPIO pins on my NanoPi Neo (H3) board and installed WiringNP. Executing commands results in the error piBoardRev: Unable to determine board revision from /proc/cpuinfo I've traced the source of the error down to this line, where WiringNP tries to open /sys/class/sunxi_info/sys_info to determine which board it is running on. This path is not present in my Armbian os. I'm using 4.11.12-sun8i #20 SMP armv7l armv7l armv7l GNU/Linux Am I missing something here? Or are there alternatives to using WiringNP?

Hello, excuse in advance my English which is not my native language. I am electronicien, so i am a Noob on Linux, i prefer the hardware. I'm working on a "NanoPI NEO" and I would like to use an EMMC with an sd slot I drew. Because i kill 3 sd card last years. So i do it, like this i use the chip thgbmjg6c1lbail which is an emmc v5.1 8gO. https://jlcpcb.com/partdetail/Kioxia-THGBMJG6C1LBAIL/C524518 This card works very well on my computer with ubuntu, or my RPI4 with raspbian, but impossible to use it with armbian as well on my nanopi neo or my nanopi M1. as the log on my rpi4 with raspbian pi@raspberryp…

installed wireguard on orange pi, configured the config, it works. It was necessary to restart orange, and after restarting it don t connecting to the LAN cable, even the orange light bulb is not lit. I start without sd, everything is fine. Reinstalled, installed wg again and the same thing again. What is the problem? OS:Debian11 (https://redirect.armbian.com/region/EU/orangepi3-lts/Bullseye_current)

Hello, I have a Orange Pi One Plus. It has an onboard mic. No matter what i do i cannot record sound from it. Please help, how can i record sound from onboard microphone? marko@orangepioneplus:~$ cat /etc/armbian-release # PLEASE DO NOT EDIT THIS FILE BOARD=orangepioneplus BOARD_NAME="Orange Pi One+" BOARDFAMILY=sun50iw6 BUILD_REPOSITORY_URL=https://github.com/armbian/build BUILD_REPOSITORY_COMMIT=d485420c00 VERSION=22.08.1 LINUXFAMILY=sunxi64 ARCH=arm64 IMAGE_TYPE=stable BOARD_TYPE=conf INITRD_ARCH=arm64 KERNEL_IMAGE_TYPE=stable marko@orangepioneplus:~$ uname -a Linux orangepioneplus 5.15.63-sunxi64 #22.08.1 SMP Tue Aug 30 07:11:56 UTC 2022 aarch64 …

Hello I'm quite new with armbian and Banana Pi, but have some experience with Raspberry PI. I started with Banana PI M2 Zero and armbian because of current unavailibility of Raspberry PI which is needed for some of my DIY pinball projects https://lisy.dev/ With a 5.15.48 Kernel Image I noted that the internal ethernet of M2 Zero is set to disabled, where with a 5.10.60 Kernel from the archive it works. After some investigation I used the "sun8i-h2-plus-bananapi-m2-zero.dtb" overlay from the 5.10 Kernel with a 5.15.43 Kernel and was happy that eth0 was working again. However as I think it is not advisable to mixing Kernel version…

Hi I'm trying to cancel echo for orange pi pc plus any idea? Methods I've tried and failed so far https://github.com/voice-engine/ec Bu yöntem de doğru hardware bilgilerini bulmadım http://alsa-project.org/db/?f=d75c947d6147c6c00b31ba67bd1a6d62c010cfad

History work: started my work from raspberry pi but recently shifted to orange pi. On raspberry, me used teh UV4I server wif webrtc to broadcast video streaming and send controls through data channels from a web browser to control a robot. My application: So basically my application is a semi-autonomous car wif two cameras.me want to control teh car from a web browser and stream a video of both cameras on teh browser Issues: 1: On orange, pl broadcast streaming from USB cameras to a web browser? 2: Send controls from web browser to orange pi? 3: Teh UL4l drivers are not installable on an orange pi pc so need to find an alternate 4: halp to fi…

In the FriendlyARM thread http://www.friendlyarm.com/Forum/viewtopic.php?f=53&amp;t=1427&amp;p=5685#p5685 we did try to use A64 images from the Pine64 or the BananaPi M64 with the NanoPi A64. The last times we did that with less success - OK Sytem is running but Network/Sound has to added via USB. No suppport for the onboard devices But today a user did wrote that - with the actual stable Pine64-image ( Armbian_5.69_Pine64_Debian_stretch_next_4.19.13 ) WiFi is useable. So I flasded the Pine64-image to a MicroSDCard and did boot. Additiionally I did see with "aplay -l" the HDMI and the analog Sound-device. But ethernet…

Installed the Armbian distribution on 05.22 Jammy. In other distributions armbian, zombies are similar. Does not complete the shutdown -P. Instead of disconnecting - a kernel panic. In other distributions, the completion of work is correct. What to do? armbianmonitor -u : http://ix.io/43ZK Error: https://freeimage.host/i/wa9cWF

Hi all, I recently bought a Banana BPI M2 Zero for a personal human-machine interaction project as this was the only (cheap) available option w.r.t. my specs (HDMI, entry-level OpenGL GPU, enough CPU power for the task). I got a version with Allwinner H3 (which in my view is good) and also read through the H3 buyer's guide. According to that guide, the CPU should be sourced by 1.3V, but to my (positive) surprise, I measured only 1.15V at the output coil (after the coil and against GND, of course) of the SY8113 regulator. However, there's certainly something not working as expected from the schematics: both, the SY8113 and the SY8089 1.2V regulators (SYSTEM+CPU…

Why do I keep getting negative CPU temperature readings? pi@orangepizero:~/klipper_config/config$ armbianmonitor -m Running unprivileged. CPU frequency will not be displayed. Stop monitoring using [ctrl]-[c] Time CPU load %cpu %sys %usr %nice %io %irq CPU C.St. 21:01:44: --- 0.18 4% 1% 2% 0% 0% 0% -3280°C 0/4 21:01:49: --- 0.17 2% 0% 1% 0% 0% 0% -2433°C 0/4 21:01:54: --- 0.15 2% 0% 1% 0% 0% 0% -2675°C 0/4 21:02:00: --- 0.14 4% 1% 2% 0% 0% 0% -2796°C 0/4 21:02:05: --- 0.13 2% 0% 1% 0% 0% 0% -2312°C 0/4 21:02:10: --- 0.12 3% 1% 2% 0% 0% 0% …

Flashed the latest Jammy 5.15.48 image and the device went offline After connecting to HDMI I found out that RTL8188EUS is no longer available. Previous Focal image worked fine in headless mode with a `0bda:8179` dongle. Anyone knows why the driver has been removed? Thanks

Hi all. I just want to apologize for my English, I write everything through a translator. Can you please tell me how to turn on the TV output now? Previously, this was done via /boot/script.bin

Issue: 1. I have Armbian 22.05 installed on emmc 2. I have run apt upgrade 3. During the process, I got an error due stated that no space on /boot 4. I have tried to reboot but no sign that board starting 5. I have burn SD, load from SD, copy SD boot to emmc boot and than can boot from emmc again The main question is how to prevent this issue in future? How to clean-up /boot from obsolete kernels and avoid space issue?

Good day, for my Orangepi PC+ I installed Armbian Ubuntu Jammy on a µSD card. Up until Armbian Ubuntu Strech I was able to use a PCM510A for sound output. The settings for this were easy. With all updated OS after Strech, I can't install the PCM. Unfortunately, the help that was published in the forum wasn't helpful or I couldn't take it over. On the eMMC I have installed Armbian5.59 Orangepipcplus Ubuntu xenial default 3.4.113 desktop. Because of the advanced age of this OS, there are no updates and upgrades. Luckily my internet radio still works. Can someone explain to me how I can install the PCM510A at Jammy? Kind regards hajupiko49

Getting FDT_NOT_FOUND(spi-add-cs1) and FDT_BADMAGIC(spi-dev-1) on uboot.

I’ve recently ran into this where whenever I power up my Olimex Lime 2 eMMC with Armbian, it powers down before it propretly starts. Here’s what I managed to observe so far. Armbian version …em, latest at this stage, I guess, it’s a bit hard to check exactly right now press power on button, it powers on via HDMI I see the Armbian boot logo some early boot messages pop up and ends with “Starting kernel ....” (Loading init Ramdisk seems OK, loading of device tree also OK) it goes back to black screen with Armbian logo and the _ blinking for a very short time I see an error with a long number and saying something about ”rebooting again…

How do I enable the cgroup memory controller on Armbian? I’m trying to control memory usage on my orange pi one using systemd with a unit file as follows: [Service] Slice=influxGroup.slice MemoryAccounting=true MemoryHigh=100M MemorySwapMax=250M The command systemd-cgls confirms that the influxGroup.slice has been created, yet memory is not controlled in line with the parameters in the unit file. I think the issue may be that cgroup memory controller is not enabled. I haven’t done anything to enable it, but I did notice that dmesg appears to indicate an enable statement in the kernel parameters: [ 0.000000] Kernel…

Hello. I reactivated my old BananaPi M1 to measure some Temperatures by Dalla1820-Sensors. This is working like a charm and I could resolve all the Problems I had. But now I want to use also one GPIO-Pin as an digital Input (via bash) But all manuals I found in the Internet didn't work. Every Time i try to setup a Pin by sudo echo (Pin-number) > /sys/class/gpio/export I get the message, that I don't have the rights to do this. Could it be, that the GPIO are not usable, when I activated 1wire ? (of course I used a different Pin as I use for 1wire) Or must I activate some more options as only "w1-gpio" in the armbian…

As stated in the topic the new Orange Pi Zero LTS reports incorrect system temps (likely due to 16bit overflow if I were to guess): ~$ cat /sys/devices/virtual/thermal/thermal_zone0/temp -2178 Model Purchased: https://www.aliexpress.com/item/4000070093365.html

Hello, I have a problem with communicating with SPI device, namely accelerometer ADXL345 I quadripple checked connection and it seems to be fine, device shows in /dev/spidev0.0 I have also tested shorting miso and mosi and testing with spidev_test, here is the result: spi mode: 0x0 bits per word: 8 max speed: 500000 Hz (500 KHz) TX | FF FF FF FF FF FF 40 00 00 00 00 95 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF F0 0D | ......@....�..................�. RX | 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | ................................ My ArmbianEn…

Hello guys, there is a question, is there an EDK2(tianocore) for orange pi 3 lts? If yes, how can it be compiled? Maybe there are projects to run uefi operating systems for arm on orange pi.

As you known OrangePi PC PLUS with armbian (e.g. Armbian 22.05 Jammy) can't be fully off. (But Xunlong's Ubuntu 16 can be off ok) I suggest change status of board from green "Supported" to yellow "SUITABLE FOR TESTING (WIP)".

Hello, I'm sort of an "educated noob" on Linux, meaning I understand about 1/2 of the postings in forums like this one. And I seem to have a problem. I am using Armbian Buster on an Orange Pi One Plus. After the most recent (to me) batch of updates, the machine will no longer boot. The error is: "Gave up waiting for root file system device." This occurs after numerous instances of "Running /scripts/local-block", (which does not seem to exist), and is followed by "ALERT! UUID=[valid UUID] does not exist. Dropping to a shell!" The "shell" it pro-ports to drop into is mythical, I assume because no keyboard driver has eve…

Hi I'm auto-login using nodm with orange pi. I run my udp.py file by creating a file named udp.desktop under the .etc/xdg/autostart folder at startup. but I need to play the wav file using pygame in the .py file, but I get a warning that the audio device could not be initialized. If I trigger my .py file manually, I can play the wav file without any problems. probably unable to load sound drivers during autostart. Can you help with this.

I have a orangepi board with H6 , it have BSP android 7 firmware. Now , I can enter BSP uboot shell. want to find a way to boot mainline kernel instead of BSP kernel. How to do that ? Any help would be much appreciated. EDIT: On amlogic arm64 board can use go command to load mainline u-boot , Does allwinner board have the similar way to do that ?

Hello everybody! There was a problem, my OrangePI R1 with the Armbian Stretch OS running works in the access point + bridge mode (hostapd & bridge-utils), and when the client downloads a large file from the network, the RTWHALXT process loads the CPU by 100% and rtw_xmit_thread by 20% (watched using top) as a result, the processor freezes. How to fix it? Thanks in advance, sorry for my English I am from Uzbekistan.

Hi, so without knowing what the swappiness actually is I changed the value from 100 to 512. Since then, I can't boot my Banana Pi M2 Zero. Shortly after that, I remembered again: swappiness is the percentage of how often to use swap and not the maximum amount of storage. Can I repair it inside uboot? Can I plug the sd card into my PC and edit the files there? Here is the log from the serial console. It's stuck forever after the last line. .............................................................. U-Boot SPL 2020.10-armbian (Nov 23 2020 - 15:48:18 +0100) DRAM: 512 MiB Trying to boot from MMC1 U-Boot 2020.10…

I got myself a Banana Pi M2 Zero (with H3 chip) and am running Armbian (Armbian_21.08.1_Bananapim2zero_buster_current_5.10.60) on it. I have enabled SPI by adding the spi-spidev dt overlay. Now I want to use both CS pins at the same time so that I can connect two devices. The spi-add-cs1 overlay doesn't change anything so I researched a bit and found this custom overlay. Unfortunately it didn't work too and there is still only a single spidev available. Is there any way to enable both of them at the same time?

Hello! I run Armbian (just updated to version 21) from an 128GByte heavy duty SD card. I am just trying to setup searx (https://github.com/searx/searx) which is using Docker containers. One of the Docker containers won't start, throwing an error message: I searched for long, trying to find some possible solution for this issue. The most fitting seemd to be, where someone said: Yes, it's for another OS and hardware, but I found no other possible solution. So disabling apparmor through a kernel parameter, is what I am trying to achieve. I addded 'apparmor=0' to the bootenv, using armbian-config. I al…

how can i know the name given to the usb port when i connect my arduino to my orange pi pc plus??? I need to be able to connect it but node red does not read it, please help

Hello, I would like to connect RFID-RC522 to OPI 3 LTS My wiring as bellow VCC -> Pin 1 GND -> Pin 9 MOSI -> Pin19 MISO -> Pin21 SDA -> Pin24 SCK -> Pin23 RST None I wired it based on this chart Then I edit the armbianEnv.txt added Reboot . But still not see the /dev/spi Where am I wrong?

Hi everyone! Follow instructuions https://linux-sunxi.org/Sunxi-Cedrus to setup hw decoding everyone need kernel with flags: CONFIG_MEDIA_SUPPORT CONFIG_MEDIA_CONTROLLER CONFIG_MEDIA_CONTROLLER_REQUEST_API CONFIG_V4L_MEM2MEM_DRIVERS CONFIG_VIDEO_SUNXI_CEDRUS Images from armbian repo is without one of them - CONFIG_V4L_MEM2MEM_DRIVERS So my proposal is to make kernel for desktop prebuilds with this flag, if its possible ofcourse. Im understand that is opensourse project, so my help can be like that - i have really much space on Y.Drive and i can share folder to minimize download usage of armbian repo.

Hello, I am not able to get the keyboard working. I have tried the downloads and compiling my own images. Bulleye is the only thing I can get to compile. There are error massages if I try to compile anything other than Bulleye.

Hello, I am looking for the old version of Armbian_5.30_Orangepipcplus_Ubuntu_xenial_default_3.4.113 Have checked the archive server here: https://imola.armbian.com/archive/orangepipcplus/archive/ but no luck There are old link found https://dl.armbian.com/orangepipcplus/archive/Armbian_5.30_Orangepipcplus_Ubuntu_xenial_default_3.4.113.7z but has been "404 Not Found" Hope that someone still archived this version, please upload to a cloud server i just want to download it for my project Thanks in advance

Using the latest FW Image https://redirect.armbian.com/orangepizero2/Bullseye_legacy the Orange Pi doesn't boot anymore or at least I'm not able to establish a ssh connection. If I use the the archived previous version the board behaves completely normal until I perform an "apt upgrade". After upgrading it also doesn't boot anymore.

Today I swapped my old Neo2 against a Neo2 LTS 1GB in my NAS case - so I had a old Neo2 512MB free for the black Aluminum-OLED-case which I got in a drawer. Now I did try to activate the OLED in ARMBIAN 5.67 user-built Debian GNU/Linux 9 (stretch) 4.19.4-sunxi64 Linux npi-neo2-27 4.19.4-sunxi64 #6 SMP Fri Nov 30 14:02:43 +03 2018 aarch64 GNU/Linux First (like on a i2c-clock" I activated i2c0 in armbian-config: root@npi-neo2-27(192.168.6.27):~# armbian-config System --> Hardware --> [*] i2c0 After the reboot I checked for the i2c-OLED-device and got: root@npi-neo2-27(192.168.6.27):~# apt install i2c-tools root@npi-neo2-27(…

Hi guys, I am new here. I bought a NanoPi Neo (H3). I am new to Armbian, but not new to Debian. The NanoHat OLED works fine with UbuntuCore 16.04 and kernel 4.14. Now I installed a new microSD card with latest Armbian Bullseye. But the NanoHat doesn't work. Armbian is up-to-date: uname -a Linux nanopineo 5.15.48-sunxi #22.05.3 SMP Wed Jun 22 07:35:10 UTC 2022 armv7l GNU/Linux cat /proc/cpuinfo processor : 0 model name : ARMv7 Processor rev 5 (v7l) BogoMIPS : 48.00 Features : half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm CPU implementer : 0x41 CPU architecture: 7 CPU variant : 0x0 CPU part : 0xc…

Hi, I am having an issue with my system running a nanopi Air. After boot, my system won't detect my rtc (i2cdetect doesn't show it) nor my USB device. The problem must come from my SD card or is software related. Indeed, when I am booting from another SDcard, with aembian installed, everything is detected normally. Does anyone has a clue? Thank you, Tibibs

hallo, for bananapim2 i can build jammy legacy and current, cli and xfce, on my pc-ubuntu-jammy. I just coppy bananapim2.eos to bananapim2.conf, removed box86 files while my pc-ubuntu-jammy seems have problems with build-script to download addition softaware from some git or ppa. Current-jammy goes off on boot on "starting kernel", but if i build with linux-sunxi-legacy.config renamed to linux-sunxi-current.config, boot is successful. On all builds i cannt becomme LAN over eth0, but wifi is ok. I can see eth0 and wlan on Networkmanager(cli too) and ifconfig. I tryed to disable all broadcom drivers i knew thru blacklisting, but wifi is working. Configuring NetworkManager a…

Hi, I've decided to make a fresh install on a bigger SD card using Armbian 22.05 Bullseye on my Opi PC+. The aplay command doesn't output any sound, and alsamixer show the card is H3 codec. I don't know if the sound is output to the HDMI port or any other problem. Anyone could help ? Than you

Armbianmonitor: http://ix.io/3UHS Hi all After update kernel from 5.10.60 to 5.15 or 5.16 on my Orange PI PC+ MJPEG-Streamer throws: Quote libv4l2: error turning on stream: Cannot allocate memory motion throws: Quote [1:ml1] [ERR] [VID] v4l2_set_mmap: Error starting stream. VIDIOC_STREAMON: Cannot allocate memory I tried to decrease resolution - even 320x240 not helps. Rolling back to 5.10.60 helps, but it's not very sustainable solution. Are there any known solution for 5.15-5.16? Today checked kernel 5.15.43-sunxi and 5.17.11-sunxi - same issue baal@3dprinter:~$ mjpg_st…

I am trying to get USB 2.0 port to reach maximum bandwidth with OTG port (Hi-Speed - 480 MegaBits/second) on PineCube device. Currently it is performing as Full-Speed (12.5 MegaBytes/second) usb port. I have measured the speed and performance using iperf + g_ether kernel mod + OTG port (details below) Official datasheet of PineCube (https://files.pine64.org/doc/datasheet/pinecube/S3_Datasheet_V1.1-20180123.pdf) tells that the port can perform up to 60 MegaBytes/second or 480 MegaBits/second. g_webcam mod is also performing at Full-Speed mode. Spoiler root@pinecube:~/uvs-gadget# iperf3 -c 192.168.10.5 -f M Connecting to …

Hello, I am looking for the latest Banana Pi M1 server image but I only see the XFCE desktop version. Witch image should I use?

Hello, my orange pi device crashes to white screen at random times. And in this case USB, ethernet does not work.Which logs should I look at?