Rockchip

Hi all, After a recent update bumped the current kernel to the 6.18 series, the rear 3.5mm jack on my NanoPC-T6 LTS stopped playing any sound. I'm connecting it to an external amplifier that worked fine before the update. What I see on 6.18 (6.18.35-current-rockchip64): The audio card (rt5616) still shows up in aplay -l and playback commands run without errors, but no sound comes out. Volume levels and mute aren't the issue — I checked those. What fixed it: downgrading via armbian-config to linux-image-current-rockchip64=25.11.2 (kernel 6.12.58). With 6.12 the audio works perfectly again. So 6.12 works and 6.18 doesn…

• 0

  Reputation Points

• 0 replies
• 714 views
• 1 follower

Manuel R

June 29Jun 29

What do I need to do to fix this error? Here is some information: root@orangepi5 ~# lsb_release -a No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 22.04.2 LTS Release: 22.04 Codename: jammy root@orangepi5 ~# root@orangepi5 ~# uname -a Linux orangepi5 5.10.110-rockchip-rk3588 #23.02.2 SMP Fri Feb 17 23:59:20 UTC 2023 aarch64 aarch64 aarch64 GNU/Linux root@orangepi5 ~# root@orangepi5 ~# apt install -y bpfcc-tools libbpfcc-dev python3-bpfcc libbpfcc Reading package lists... Done Building dependency tree... Done Reading state information... Done The following additional packages will be installed: ieee-data libclang-cpp11 libllvm11 python3-n…

• 0

  Reputation Points

• 0 replies
• 3k views
• 1 follower

xiaoke

March 6, 20233 yr

I have 23.8.1 Jammy installed with kernel 5.10.160 and I'm getting plenty of kernel errors during any video playback, and these also cause the playback to freeze. From my research, these error messages come from librga - which I assume come from the panfork and rockchip repos but I was wondering if anyone has been able to resolve these errors.

• 0

  Reputation Points

• 0 replies
• 3k views

OttawaHacker

September 22, 20233 yr

Hi everyone, I was experience some strange things with two similar devices, the first I installed in february this year, mesa v.24.x and EGL 1.4 and it was working fine The other one I installed this week and it turns out that it uses mesa v.25.x and EGL 1.5, although performance was great with most 3D apps (like glmark2) I had poor performance under sway/kitty or the retroarch menu for instance (something like 15 fps). It took me a few days to find a solution so if you have similar issues please try installing mesa with the kisak repository as it fixed my problems sudo add-apt-repository ppa:kisak/kisak-mesa -y sudo apt update sudo apt upg…

• 0

  Reputation Points

• 0 replies
• 2.6k views

dwarfman78

September 14, 20251 yr

Hi I am wondering if anyone has had any luck using a mini PCIe to SATA adapter with an Orange Pi 4 LTS to attach a SATA hardrive? If yes, which adapter did you use? I would like to throw the OPi 4 LTS and a hard drive in a box and make a mini fanless NAS box. thanks

• 0

  Reputation Points

• 0 replies
• 2.7k views
• 1 follower

dieselnutjob

March 6, 20233 yr

Does the armbian build come with 3D acceleration? Or is it 2d only?

• 0

  Reputation Points

• 0 replies
• 2.6k views

Muzzy

December 27, 20178 yr

Hello people, I am trying to set CPU Governors but all the cores change to the same clock and cpufreq-info reports "CPUs which run at the same hardware frequency: 0 1 2 3", with that even one thread working is making the CPU scale up all clocks and heat more than it should, is there a way to unlink them and each one have their own clocks according to each core processing load?

• 0

  Reputation Points

• 0 replies
• 2.7k views
• 1 follower

Nikos Giannakas

November 17, 20196 yr

Hi, after find out that the usb-connector right so have I tried install on a usb3-sata-m2 disk, I have problem to install. I created partision on the usb-disk with ambian-install, and after that trying to select 8 (download and install clean image), but it can't find any image for my board. I have no eMMC on my 4GB ram radaxa zero 3Wso I run from SD-card.

• 0

  Reputation Points

• 0 replies
• 2.2k views

Johan Nilsson

February 13Feb 13

Hey! I recently got a CAN-bus up and running on a Tinkerboard running Armbian, but I've run into another problem here: The CAN-bus buffer fills up. After sending a few messages I get an error saying "No buffer space available". I've noticed that some other people are solving this by increasing the buffer size, but that seems like a weird solution to me. And it wouldn't really help me much. I need to empty this buffer when I read from it, or manually (without restarting the CAN-bus). Any ideas on how to do that? Thanks

• 0

  Reputation Points

• 0 replies
• 2.1k views

Marius Brataas

February 21, 20188 yr

Needed/wanted to add Bluetooth to my OPi5 and also needed WiFi at the same time. Did not want to use 2 USB ports so I tried the T2UB. Working well. Bluetooth appeared on my Armbian Ubuntu Jammy setup and I plugged in the dongle. It saw a few of my bluetooth devices. Reason I wanted bluetooth is to use a controller for some games/emulators. I'll make another post for that. My PS4 Dualshock controller is not showing up in the list of devices. My version is an older version, Armbian 23.06.420 Jammy with Linux 5.10.160-rk35xx No end-user support: built from trunk Conclusion: TPLink T2UB should work properly on Armbian Ubuntu desktop.

• 0

  Reputation Points

• 0 replies
• 1.3k views

ArmBoy1988

January 24, 20242 yr

I followed the provided instructions to install Arbmbian on Orange Pi 5 Plus 16GB, so I downloaded the official Ubuntu image from the Orange Pi website, and when it booted, it sudo apt update sudo apt install mtd-utils sudo flash_eraseall /dev/mtd0 The flash operation was finished successfully. Then I turned off, loaded Armbian Ubuntu 24.04 (Noble) (Desktop images with Armbian Linux v6.12) on SD and started the machine. I have a monitor connected to the machine, but there is no output. My router doesn't show any new network device, so I suppose that Armbian doesn't load. It's exactly the same situation when I tried to install Armbian without /dev/mtd0 erasin…

• 0

  Reputation Points

• 0 replies
• 3.4k views

Igor V

December 10, 20241 yr

Hello, I have several Hardware working with the Tinkerboard / S and like to propose those to the "Tested 3rd party hardware" section To whom can i address this? Thanks Roman

• 0

  Reputation Points

• 0 replies
• 2.4k views

SecureXperts

March 16, 20197 yr

Hello Kind Forum Experts, I ask for you help with following issue: Device: Nanopi-r4s 4GB Background: I'm happy with my device running from SD - but wanted to preemptively upgrade to eMMC based setup for improved reliability. I bought "original" FriendlyELEC SD-to-eMMC adapter + 64GB eMMC module. with normal microSD it boots great, with the sd-to-eMMC - nothing multiple attempts, tried both cloning my old SD & writing fresh image but both didn't help. eMMC type is 1.8V\3.3V HS400 speed, i think i need to address that in the .dtb file ? any help would be much appreciated Uri

• 0

  Reputation Points

• 0 replies
• 3.3k views
• 1 follower

UBS1

May 16, 20233 yr

After working in the ssh session for a while, the message suddenly appears: Broadcast message from user@rock-5c (Wed 2025-02-26 11:08:02 CET): The system will suspend now! Judging by the entries of journalctl, suspend is triggered in the kernel, not in systemd $ journalctl -b | grep -i suspend Feb 26 11:00:29 rock-5c kernel: rk806 spi2.0: dvs-suspend-control-by missing! Feb 26 11:00:29 rock-5c kernel: rockchip-dmc dmc: suspend_rate = 528000000 Feb 26 11:00:29 rock-5c kernel: rockchip-dmc dmc: deep_suspend_rate = 2112000000 Feb 26 11:00:29 rock-5c kernel: rockchip-pm rockchip-suspend: not set pwm-regulator-config Feb 26 11:00:29 rock-5…

• 0

  Reputation Points

• 0 replies
• 2.3k views
• 1 follower

pepperheart

February 26, 20251 yr

I need to get a driver working on my ROC renegade with DKMS. However, the kernel headers provided by the repository: linux-headers-rockchip64 - Linux kernel headers for 4.4.156-rockchip64 on arm64 do not match the kernel provided by the repository: linux-image-rockchip64 - Linux kernel, version 4.4.162-rockchip64 This is after updating the cache just now and yes, both packages are installed. Is there some way I can guarantee that the version of my installed kernel and headers always match (apart from compiling them myself)? There is no linux-image-next package for rockchip64 and I'm hesitant to install the nightly release.

• 0

  Reputation Points

• 0 replies
• 3.2k views

liakhova

December 22, 20187 yr

However, Armbian is configured to provide only spidev2.0, while TinkerOS can have spidev0.0, spidev0.1, spidev2.0 and spidev2.1 all enabled at the same time as long as you disable UART4 which shares GPIO header pins with SPI0. In the TinkerOS case, there is a config tool which edits a small and straightforward text file in /boot/ containing lines such as "intf:spi0=on" or "intf:uart4=off". The corresponding Armbian file seems to be /boot/armbianEnv.txt - possibly with overlays=... lines and DTS files. There also is a tool called armbian-add-overlay to load (at runtime?) DTS files...

• 0

  Reputation Points

• 0 replies
• 2.6k views

Bienxanh

June 2, 20206 yr

For the vendor-rk35xx kernel (6.1.115): an out-of-tree build of the vendor imx415 driver with a real 4K@60 mode, plus the overlay to bind it. https://github.com/bambooCZ/rk3588-imx415-4k60

• 0

  Reputation Points

• 0 replies
• 562 views

Abdul Badalambadad

October 4Oct 4

I have been working on rk3328 (kernel 6.1) based board recently and have been trying to bringup wifi RTL8723AS module using rockpi-e image. As there is no direct support available for this module I have tried to cloning it from github and building it but it gives compilation errors. Hence I referred to drivers available in the kernel and found one for the module similar to that of my module (RTL8723BS), cross verified through user manual and datasheets and build it using armbian. The driver gets built properly and even initializes upon powerup but it isn't getting into probe. The wifi is interfaced through SDIO to the board. Any idea what might b…

• 0

  Reputation Points

• 0 replies
• 2.2k views
• 1 follower

Bhavin

February 8, 20242 yr

I bought a wifi dongle (for 3 pounds on ebay!) having a realtek chip 8821cu. There were some disconnects from time to time, and I was unable to find out why from the logs. Few days ago I installed and recompiled the realtek drivers from https://github.com/lwfinger/rtw88, got some new modules, replaced the modules in the directory /lib/modules/6.1.43-vendor-rk35xx/kernel/drivers/net/wireless/realtek/rtw88 Since then, I have no more disconnect. This may helps someone maybe.

• 0

  Reputation Points

• 0 replies
• 2.5k views

Tony3

August 4, 20242 yr

hi. Please tell me, I installed the image and bootloader on the emmc (armbian) on the radxa 5t and now I can't install another one because the board doesn't want to start from the CD card. what should I do? Im try this but doesnt work https://docs.radxa.com/en/rock5/rock5t/low-level-dev/maskrom/erase

• 0

  Reputation Points

• 0 replies
• 1.1k views
• 1 follower

B1tik

March 4Mar 4

If anyone is looking at fixing the access for gpio and i2c - I found you can fix it with the following udev rules addgroup --system i2c addgroup --system gpio create in /etc/udev/rules.d/60-i2c-tools.rules SUBSYSTEM=="i2c-dev",KERNEL=="i2c*", GROUP="i2c", MODE="0660" create in /etc/udev/rules.d/61-gpio-tools.rules SUBSYSTEM=="gpio",KERNEL=="gpiochip*", GROUP="gpio", MODE="0660"

• 0

  Reputation Points

• 0 replies
• 2.6k views
• 1 follower

OttawaHacker

July 23, 20233 yr

Has anyone ever gotten the Radxa Zero 3w working in gadget mode? I bought a Zero 3w about a week ago and have been beating this horse most of the time. I can't get the device to connect via USB. A or C. When I try to connect (radxa.local) it will always go through wifi. If I have wlan0 disabled or even my internet off it just will NOT connect. It clearly is using wifi to connect even if I use the hostname. Maybe this is something simple but I and another engineer I work with have been scratching our heads about it. The obligatory AI search was an endless loop of everything we had already tried. Anybody have any advice?

• 0

  Reputation Points

• 0 replies
• 3.4k views

sterling1989

September 15, 20251 yr

I built apt packages for the OPI 5 wiring pi and have them hosted in lauchpad https://launchpad.net/~erik1220/+archive/ubuntu/wiringpi-opi Any way to contribute them to the official build? Btw apt-add-repository is broken on 25.8 - I assume it is a side effect of python 3.11... seen similar errors on ubuntu

• 0

  Reputation Points

• 0 replies
• 1.7k views
• 1 follower

OttawaHacker

July 23, 20233 yr

Installed the desktop version of Armbian (bionic) on Asus Tinker Board S and noticed that the GPIO Pin 40 is always high on boot up. Please let me know whether this is high by default for any reason and if possible how to set it to Low while start up.

• 0

  Reputation Points

• 0 replies
• 2.9k views

Arun

August 6, 20197 yr

I tested boot time and node-red-reboot time and noticed that boot-time is with bookworm ~2 sec and node-red-reboot got from 14sec to 20sec. I hope you can improve performance so I can upgrade. https://paste.armbian.com/uhocorarad

• 0

  Reputation Points

• 0 replies
• 2.4k views

tim oberle

July 3, 20233 yr

Whats the correct way to get the Armbian build to spit boot out as a separate fat partition at the start of the image? Im just getting started with Armbian (on tinker board) and want to integrate it into by own build system. I need to generates SD card images with 3 different configs building 3 separate installs sharing a common multiboot 512MB fat boot partition. I dont need the Armbian build to do the multiboot or manage the boot partition at all, I just want to be able to extract the root & boot fs at the end of the build process.

• 0

  Reputation Points

• 0 replies
• 3.5k views
• 1 follower

botfap

September 28, 20179 yr

probably a post bragging of my christmas gifts, but mostly just documentation because it really confused and stumbled me from the get go so, my setup was powering tinkerboard (the first revision, without the new fangled eMMCs) via GPIO because it confused the hell out of me how to power this beast. this was powered through the XL4015 buck converter 12.1/12.2 V on input, with ammeter and voltmeter included on the board. (the board was current limited to 5A, because why not? the rk808 is 6A tops) ok from the get go the board powers (not load tested, just power through and run kodi-gbm UI) from 3.4V to 6.2V. undervolting or overvolting it doesnt shuts itself dow…

• 0

  Reputation Points

• 0 replies
• 3.1k views
• 1 follower

xAda

January 13, 20233 yr

I see there's an overlay for the R4S called rk3399-dwc3-0-host, but it already seems to be in host mode by default. I can't figure out how to set it to peripheral mode so I can have some usb-gadget love. Anyone figured out a fix?

• 0

  Reputation Points

• 0 replies
• 1k views
• 1 follower

Meestor_X

March 16Mar 16

I have Rock Pi S V13, that has 4 UART ports. I'm already connecting to the board via serial console on /dev/ttyS0. How can I find out what are the other ports assignments/paths? I have tried to use a Python script to detect the output by using an FTDI to USB board with no luck (the voltage and baudrate are correct). The Python script taken from manual: import serial import time # I've tried /dev/ttyS2 and /dev/ttyS4 ser = serial.Serial(port='/dev/ttyS4', baudrate=115200, timeout=0.1) print(ser.name) try: while True: ser.write(b'hello') time.sleep(0.5) except KeyboardInterrupt: …

• 0

  Reputation Points

• 0 replies
• 4.3k views

Armate

February 21, 20233 yr

I just installed with the latest KDE image, but I'm able to reproduce this with any of the images available. After going through the initial configuration, wifi works great. I updated apt and upgraded everything. Then I installed the armbian-firmware-full package. After rebooting wifi still works. Then I setup Bluetooth for my mouse and keyboard. They work correctly. After rebooting I no longer see any networks to connect to for wifi. If I disable Bluetooth and reboot wifi works again and so does Bluetooth. Is this an issue of daemons or drivers loading in the wrong order?

• 0

  Reputation Points

• 0 replies
• 1.2k views
• 1 follower

oorrwullie

March 6, 20242 yr

Hi, I have a MIPI screen to replace. I have configured DTS in the kernel, but it doesn't light up and the backlight doesn't respond. May I ask： Uboot needs to initialize and light up the screen, but there is no screen configuration in the built-in DTS of Uboot. How can I adjust the screen related configuration in DTS?？ help help.....

• 0

  Reputation Points

• 0 replies
• 1.5k views

lay

August 20, 20242 yr

I just installed with the latest KDE image, but I'm able to reproduce this with any of the images available. After going through the initial configuration, wifi works great. I updated apt and upgraded everything. Then I installed the armbian-firmware-full package. After rebooting wifi still works. Then I setup Bluetooth for my mouse and keyboard. They work correctly. After rebooting I no longer see any networks to connect to for wifi. If I disable Bluetooth and reboot wifi works again and so does Bluetooth. Is this an issue of daemons or drivers loading in the wrong order?

• 0

  Reputation Points

• 0 replies
• 1.6k views
• 1 follower

oorrwullie

March 6, 20242 yr

I confess, I have no idea what to do with the contents of this repository. Any help would be great, as I've said before, my Linux experience is lacking on things, the work I do is usually in hardware with kiB of RAM... I'm working on the assumption that this would be the best lib to install, if I'm wrong, let me know. https://github.com/rockchip-linux/libmali

• 0

  Reputation Points

• 0 replies
• 3.2k views

TonyMac32

May 15, 20179 yr

Good Morning, I'm using Libre renegade with armbian bullseye minimal. How can I change splash screen, replacing the armbian logo and 4 penguins, with a personal one? Has anybody done it eralier? Thanks in advance

• 0

  Reputation Points

• 0 replies
• 2.9k views

Fra

June 27, 20224 yr

Anything targeting the mainline will be getting 4.12 tonight, I can confirm some patch failures for Tinker Board/MiQi NEXT, Specifically: 0002-Adaptation-ARM-dts-rockchip-fix-the-MiQi-board-s-LED Was patched in the kernel. 9002_dts_rk3288_updates - Fixed and the packaging postinstall-scripts patch specific chunk: scripts/package/builddeb There is no "Provides:" statement.

• 0

  Reputation Points

• 0 replies
• 3k views

TonyMac32

May 15, 20179 yr

If anyone has troubles with HDMI when using 5.x kernels, and has enough skills to recompile an armbian, give this a try : https://github.com/Miouyouyou/build And then either answer here, or in the bug report : https://github.com/armbian/build/pull/1887

• 0

  Reputation Points

• 0 replies
• 2.8k views

Myy

May 9, 20206 yr

Due to the shortage of memory chips these days, Radxa is using different emmc models in their boards. For example, I recently ordered a big batch of Rock S0 boards, but they had to be delivered with Sandisk iNAND 32GB emmc drives instead of the typical 8GB option. The problem is that Armbian did not reliably boot on these new boards. It randomly gets stuck during initialization with the onboard LED endlessly blinking. Some boards works, some did not, some only works sometimes. Long story short, in case other people also have this problem: I found the solution. I believe it is caused by Armbian's Rock S0 device tree enabling the HS200 high speed mode for t…

• 0

  Reputation Points

• 0 replies
• 1k views

grixm

May 21May 21

Hey everyone I've compiled my own kernel using this awesome tool, and I'm now running it on a tinker board. Everything's been working fine, except for one annoying thing I just ran into: I can't use the GPIO pins. When I try to use a pin in python I just get this message back: "RuntimeError: This gpio is set to other function!". If I run Debian I can use the gpio just fine, but I need some kernel modules that doesn't ship with Debian. That's why I've compiled my own armbian kernel. Anyways, any idea on how to fix this? Any special module I should add when compiling the kernel? Thanks Marius

• 0

  Reputation Points

• 0 replies
• 2.8k views

Marius Brataas

February 24, 20188 yr

See for more details but without using the overlay-user folder - I was not able to get the pwm to work on a fresh download.

• 0

  Reputation Points

• 0 replies
• 1.7k views
• 1 follower

OttawaHacker

June 15, 20251 yr

I downloaded the kernel source and kernel headers on a rk3288 rockchip (tinkerboardS) and noticed there was a mismatch between kernel version, armbian release and chipset (rockchip64) - see below. root@tinkerboard:~# uname -a Linux tinkerboard 4.4.174-rockchip #7 SMP Sun Feb 10 11:57:26 CET 2019 armv7l armv7l armv7l GNU/Linux root@tinkerboard:~# cat /etc/armbian-release # PLEASE DO NOT EDIT THIS FILE BOARD=tinkerboard BOARD_NAME="Tinkerboard" BOARDFAMILY=rockchip VERSION=5.75 LINUXFAMILY=rockchip BRANCH=default ARCH=arm IMAGE_TYPE=stable BOARD_TYPE=conf INITRD_ARCH=arm KERNEL_IMAGE_TYPE=zImage root@tinkerboard:/usr/src# …

• 0

  Reputation Points

• 0 replies
• 2.4k views

Roland G

May 19, 20197 yr

If you'd like to get the LEDs working with armbian, you can run these commands (or one of the other ones if you want different indications): run modprobe ledtrig-netdev to check if it's loading the driver properly. If not, add the file /etc/modules-load.d/ledtrig.conf add just this line: ledtrig-netdev Then, create /etc/tmpfiles.d/leds.conf and add this: w /sys/class/leds/green:lan/trigger - - - - netdev w /sys/class/leds/green:lan/device_name - - - - eth0 w /sys/class/leds/green:lan/link - - - - 1 w /sys/class/leds/green:lan/tx - - - - 1 w /sys/class/leds/green:lan/rx - - - - 1 w /sys/class/leds/green:wan/trigger - - - - netd…

• 0

  Reputation Points

• 0 replies
• 1.3k views

Meestor_X

March 16Mar 16

Hey there, I now have my Nanopi R4S for quite a while but never got it to run stable over a longer period of time. Now I finally connected another board to its debug serial in the hopes to catch something that causes the board to freeze. Well this is what I have collected: https://p.na4.eu/?bc818aefadc9b5b2#DAunYKXghkaqcLhh8SLWMKTWABewpwPJRnHMHDemR98Y The log is complete, there is nothing missing between 08:51 and 19:14. This is how I collected it. Basically during the state of throwing errors the board becomes unresponsitive and continously heats up. Active cooling was in place so no danger of overheating. https:/…

• 0

  Reputation Points

• 0 replies
• 2.1k views

Werner

April 10, 20233 yr

Ok so I think I have this figured out. It doesn't work at all in Armbian 23.05.1 with the 6.x kernel no matter what I try. It does work in the older Armbian 23.02.2 Jammy (kernel 5.15.93) but the given instructions didn't work for me and needed additional commands. I had to enable the rk3328-opp-1.5ghz overlay or else the max frequency was locked to 1296 MHz. I also found the MAX_SPEED value in the instructions to be too low. To get it to work in 23.02.2: First you have to enable the rk3328-opp-1.5ghz overlay in armbian-config (System > Hardware > rk3328-opp-1.5ghz) or just add it to the overlays line in /boot/armbianEnv.txt and reboot. Next open the /et…

• 0

  Reputation Points

• 0 replies
• 2.5k views
• 1 follower

TheRealBanana

June 2, 20233 yr

Greetings, On the tinkerBoard, I'm using python. I having difficulty understanding why the functions don't return the values that is expected according tho the library help. I'm using python3 and the ASUS GPIO library. import ASUS.GPIO as GPIO GPIO.setmode(GPIO.BOARD) This is the output from ipython: In [18]: help(GPIO.gpio_function) Help on built-in function gpio_function in module ASUS.GPIO: gpio_function(...) Return the current GP…

• 0

  Reputation Points

• 0 replies
• 2.7k views

iomari

September 25, 20197 yr

At first, the card was recognized as a Mass Storage, I used usb_modeswitch to make it recognized as a wifi card, but iwconfig still didn't show this card, and /sys/kernel/debug/ieee80211 did exist, but was empty. I don't think it's a driver issue because when I plugged this card into my debian laptop, it worked even without usb_modeswitch. journalctl and lsusb logs are in the files. journalctl.log lsusb.log

• 0

  Reputation Points

• 0 replies
• 2.4k views
• 1 follower

MCredbear

February 22, 20233 yr

Hello, running Armbian_22.11.2_Odroidm1_bullseye_edge_6.1.0.img.xz + updates. I saw in other post (/topic/17418-cameras-with-rock-pi-4-c/😞 But I do not see any Hardware menu in System. I had a look to armbian-config and saw that there is a lot of device-specific code and probably odroidm1 is not supported yet. Also I searched for some DTB that may work, but none is shipped with the current kernel: is empty. Should I add explicit support like in this patch: https://github.com/armbian/build/pull/1482/files? Or there are more modern way to add cold-pluggable hardware? Thanks in advance for your suggestions!

• 0

  Reputation Points

• 0 replies
• 2.8k views
• 1 follower

dondon

February 22, 20233 yr

Hi all, armbianmonitor -u output - https://paste.next.armbian.com/donixuwuno saw the following stack trace: [52815.041752] ------------[ cut here ]------------ [52815.041820] NETDEV WATCHDOG: enP4p65s0 (r8169): transmit queue 0 timed out [52815.042019] WARNING: CPU: 0 PID: 0 at net/sched/sch_generic.c:525 dev_watchdog+0x1a8/0x1e0 [52815.042081] Modules linked in: tls rpcsec_gss_krb5 nft_chain_nat xt_MASQUERADE nf_nat xt_addrtype nft_compat nf_tables overlay bnep nf_conntrack_irc nf_conntrack_sane nf_conntrack_tftp nf_conntrack_sip nf_conntrack_netlink xt_conntrack nf_conntrack_pptp nf_conntrack_snmp ts_kmp nf_conntrack_amanda nf_conntrack_ne…

• 0

  Reputation Points

• 0 replies
• 2.1k views

ozacas

January 2, 20251 yr

sorry just switched my box for the first time in a long time. i was wondering if i can seamlessly upgrade to the latest Armbian without losing hardware acceleration included in RK3288/RK3328 Legacy Multimedia Framework or is it only for Debian Buster? is kodi-gbm (RKMPP) still viable? is there a compatible version much higher than 18.9 "Leia"? thanks!

• 0

  Reputation Points

• 0 replies
• 2k views

xAda

January 3, 20251 yr

I am using this image https://dl.armbian.com/rockpro64/nightly/Armbian_5.82.190422_Rockpro64_Debian_stretch_dev_5.0.0.7z Board start only without wifi & pcie. But i got this error. https://pastebin.com/gq2DpXaF

• 0

  Reputation Points

• 0 replies
• 3k views

FrankM

April 22, 20197 yr

Running Armbian Desktop stable 4.14y my Tinkerboard sees the WiFi network but refuses to connect. It has worked with TinkerOS so I don’t think it’s hardware related and Iknow the passcode and WPA settings look right. When I try to connect it spins and then fails after timing out. armbianmonitor -u output (with ethernet attached) http://ix.io/1x1J I’m probably just missing something stupid. Suggestions?

• 0

  Reputation Points

• 0 replies
• 2.3k views

WZ9V

December 29, 20187 yr

Hi I installed https://dl.armbian.com/rock-5c/Bookworm_current_minimal-homeassistant, configured it to my liking (OS on a mirrored ZFS pool) to discover there is no WiFi, no Bluetooth. It's now kernel 6.12.17-current-rockchip64. Anybody managed to get WiFi and BT working with this kernel? Thanks, Chris

• 0

  Reputation Points

• 0 replies
• 2.1k views

ChrisO

April 3, 20251 yr

Well, I am trying to flash armbian to my board, but after I run upgrade_tool ef in mistake. I can't do anything via maskrom/loader at all wherever Windows or linux. Then I try to unbrick it via flash the "MiniLoaderAll.bin" via "upgrade_tool db" and "ul" but them don't work at all(Timeouted),How can I do with it?

• 0

  Reputation Points

• 0 replies
• 2.2k views
• 1 follower

calvin lin

March 2, 20242 yr

Is there any existing solution how to use SPI2 on Radxa Rock Pi S? In dmesg I found these messages: [ 1.619008] rockchip-pinctrl pinctrl: pin gpio1-22 already requested by ff0c0000.serial; cannot claim for ff140000.spi [ 1.619046] rockchip-pinctrl pinctrl: pin-54 (ff140000.spi) status -22 [ 1.619065] rockchip-pinctrl pinctrl: could not request pin 54 (gpio1-22) from group spi2-miso on device rockchip-pinctrl [ 1.619082] rockchip-spi ff140000.spi: Error applying setting, reverse things back Is it somehow possible to disable the serial port which is in collision with the SPI? There is a log from armbian monitor: http://…

• 0

  Reputation Points

• 0 replies
• 2.3k views

Tomas77

June 20, 20233 yr

After upgrading to kernel 6.8, I've noticed my orange pi 5 running a bit hotter than when using kernel 5.10, even with the CPU load a little bit lower than before. Nothing alarming, just an observation. Did anyone else notice the same behaviour?

• 0

  Reputation Points

• 0 replies
• 1.7k views

Tiago Esperança Triques

June 27, 20242 yr

Hi! I'm using Tinkerboard S R2.0 in headless mode, but with LightDM (kiosk mode). It's connected to HDMI display, and I soldered display's backlight on/off contact to a relay that can turn on/off the backlight. I see that Amrbian turns off image output (launches screensaver as a black screen) after 10-15 min, but I could not find out where those settings are stored. Please help to find out.

• 0

  Reputation Points

• 0 replies
• 1.7k views
• 1 follower

SuperMaximus

October 19, 20241 yr

I have tried to used apt update and upgrade to update latest Mesa driver but keep getting error 'file has unexpected size' so therefore fails as unable to fetch the archive! the file is available after apt update but unable to install. How can i fix this please?

• 0

  Reputation Points

• 0 replies
• 1.9k views
• 1 follower

Jon M

March 20, 20251 yr

Hi, I have the board connected by HDMI to a TV but when I start I have no sound, I have to go to the speaker icon, configuration and the option is always selected "Speakers - internal audio" but if I want to have sound I have to choose the output option "Analogic ouput- internal audio" and if I restart I have to do the process again. According to the fine adjustment guide of ARMBIAN I must execute the command pacmd list-sinks | less And should be marked with * the selected card but none appears with that symbol. I attach the terminal output after selecting the right output on the desktop to have sound to see if someone is so kind to help me solve my problem. Thanks a…

• 0

  Reputation Points

• 0 replies
• 2.2k views
• 1 follower

Vidor

March 27, 20233 yr

``` May 21 21:53:26 rpc.idmapd[21345]: main: fcntl(/run/rpc_pipefs/nfs): Invalid argument May 21 21:53:26 systemd[1]: nfs-idmapd.service: Control process exited, code=exited, status=1/FAILURE ``` The rpc.idmapd version in Debian is still ancient (as with many things in debian) and still requires dnotify but the armbian kernel for the orange pi 5 build ``` $ grep -i dnotify /boot/config-5.10.110-rockchip-rk3588 # CONFIG_DNOTIFY is not set ``` It looks like bookworm will likely fix this when it's out, so maybe the right thing to do is simply move to bookworm asap but this does prevent the ability to fully support nfsv4 with…

• 0

  Reputation Points

• 0 replies
• 1.5k views

dopey1620

May 22, 20233 yr

Stable, weekly and CI builds https://www.armbian.com/orangepi-5/

• 0

  Reputation Points

• 0 replies
• 7.3k views

Igor

January 3, 20233 yr

I would like to setup NTPD with PPS but seems GPIO PPS is not yet supported. Anyone working on this?

• 0

  Reputation Points

• 0 replies
• 2.4k views

Fred Munden

September 5, 20179 yr

Hello and thanks for reading. I have done some digging before posting this so let me explain my issue and then what I have tried. I am using the Tinker Board S (via SD card, had same issue using EMMC img also) with the Bionic mainline kernel 4.14.y (in armbian config tool it shows Armbian 5.60 Stable ) on an LG 24LF452B montior/tv with the boards HDMI port and no adapters. I have been trying to set the display resolution to 1366X768 or as close to it (it does not appear in the display settings menu natively) but cant seem to make this work. The display works fine on other resolutions, except for horrible image because the wrong resolution, and can be used on 1366X768 …

• 0

  Reputation Points

• 0 replies
• 3.4k views
• 1 follower

Tinkerdan

November 3, 20187 yr

Running Armbian 23.8.1 Jammy CLI Minimal. Since my kernel updated to 6.1 I have been having serious stability issues. Uptime is somewhere between 3 and 24 hours before the system becomes completely unresponsive. Prior to the 6.1 update this system was rock solid and would be up for months at a time, only ever rebooted for kernel updates. I currently have a monitor plugged in running dmesg -W hoping for something when these hard locks are occurring but I am not seeing anything to indicate what the issue may be. armbianmonitor-u output is: https://pastebin.com/DeU8VsB4 Any suggestions on any additional debugging I can enable to tr…

• 0

  Reputation Points

• 0 replies
• 2.4k views

Varimir

October 10, 20233 yr

Starting a new thread after this one solved my question: https://forum.armbian.com/topic/15044-how-to-re-format-and-remount-and-redo-lvm-volume-on-ssd/?tab=comments#comment-107672 but taking care of those things wasn't the root cause. it turns out the drive wasn't unmounted cleanly after accidentally unplugging the power cable from the board. I had a drive setup using: pvcreate /dev/nvme0n1 vgcreate rockpro64 /dev/nvme0n1 lvcreate -n <name> -L 500g rockpro64 then i formatted like this: mkfs.ext4 /dev/rockpro64/name but then i accidentally unplugged the power source while i got my system up and running it wasn't cleanly unmounte…

• 0

  Reputation Points

• 0 replies
• 2.4k views

kkdao

September 1, 20206 yr

Is it possible to switch on H264 encoding HW acceleration in chromium browser for WebRTC? I need to send two 2560x720 streams to server from radxa 5c Thanks

• 0

  Reputation Points

• 0 replies
• 1.9k views

Vass

September 26, 20242 yr

Hi! I'm using Armbian with Ayufan's 5.3.0rc4 kernel (until ~1 month ago when I decided to freeze the dev kernels, they were not able to expose the pwmon for the fan that I need to keep running to cool my nas case). But I've seen lots of updates flying around about uboot. So I am wondering: are there significant improvements to uboot? I am currently using an old version of uboot on the SPI flash (so it is a little painful to test new version) and I am wondering if I should disable my SPI in order to have uboot on my emmc (to boot off the emmc) or if there is even a newer option to reflash my spi with a newer uboot... Thanks, Mathias PS: so…

• 0

  Reputation Points

• 0 replies
• 2.7k views

Mathias

November 25, 20196 yr

Hi, I have orange pi 5. I searched all over internet for information how to set on startup/power on GPIO pins behavior, but i cannot find anything. Most of GPIO pins are set to IN mode 1. Sadly I need them to output mode 1. I am scared something could burn this way since i set them to though wiringPI after kernel boot sequence is complete. Can some one give information how I can set them up at earlier point when I power on the board? I found that DTB/DTS file could do it. But there is no clear information / pin addresses I should set. Thanks in advance! Regards!

• 0

  Reputation Points

• 0 replies
• 1.9k views
• 1 follower

David Parushev

February 15, 20242 yr

Hi, hot o enable splash screen on boot fo this image: Armbian_20.02.1_Rockpro64_bionic_legacy_4.4.213_desktop.img for Rockpro64? Thanks

• 0

  Reputation Points

• 0 replies
• 2.8k views

DBSD

May 15, 20206 yr

I have a RockPro64 that I have been using for many years as a server. It is currently running Armbian bookworm 12.5. Most of the storage is on an M.2 SSD attached to the PCI socket and is subdivided into disk volumes using linux LVM2. Today I accepted the Armbian kernel upgrade from 6.1.50 to 6.6.16 During the reboot it failed to mount any of my LVM volumes because the device nodes where not present. I found this article about how to recover the situation: https://unix.stackexchange.com/questions/11125/lvm-devices-under-dev-mapper-missing While in rescue mode I ran the suggested command vgchange -a y <name of volume gr…

• 0

  Reputation Points

• 0 replies
• 2k views
• 1 follower

David Pottage

March 3, 20242 yr

Hello, thanks for supporting this device I'm trying to install pivccu (homematic smarthome) on armbian to use it with homeassistant. It's not officially supported (yet) but I got it running with the default hardkernel ubuntu image. https://github.com/alexreinert/piVCCU/blob/master/docs/setup/armbian.md I can't seem to find the kernel headers/sources for my kernel. Any Ideas? Below is what I found. I'm willing to go back to 6.1.12 if that doesn't cause any issues. Can't do it via armbian-config. Do I need to download an image from the archive and reinstall? uname -a Linux odroid 6.3.4-rk3568-odro…

• 0

  Reputation Points

• 0 replies
• 2.9k views
• 1 follower

armbee

August 14, 20233 yr

Hello Guys. สมัครสมาชิกufabet เว็บพนันบอลต่างประเทศ I want to extend the current kernel (Tinkerboard with rockchip-kernel-4.4.120 on Debian-Armbian) to include IR (GPIO) and DVB modules. What do I have to consider or is this possible with the usual run-through? (copy .config from current system, make menuconfig, make, sudo make install, sudo make modules_install) Is there possibly already a tutorial that I have not seen?

• 0

  Reputation Points

• 0 replies
• 2.1k views

roroeow8

March 25, 20197 yr

I build a kernel last night because I wanted a headless debian based system, not the nightly desktop available for download. Everything went well (almost*) until I tried installing NFS Apr 21 09:16:39 tinker1 rpc.idmapd[7408]: main: fcntl(/run/rpc_pipefs/nfs): Invalid argument Apr 21 09:16:39 tinker1 nfs-common[7394]: Starting NFS common utilities: statd idmapd failed! Apr 21 09:16:39 tinker1 systemd[1]: nfs-common.service: control process exited, code=exited status=1 Apr 21 09:16:39 tinker1 systemd[1]: Failed to start LSB: NFS support files common to client and server. -- Subject: Unit nfs-common.service has failed -- Defined-By: systemd -- Support: http:…

• 0

  Reputation Points

• 0 replies
• 3.2k views

chrisf

April 20, 20179 yr

Here in the forum the psu mod for the roc-rk3328-cc board was discussed. Does anyone know where I can find instructions on how to do this exactly?

• 0

  Reputation Points

• 0 replies
• 2.4k views

ska

March 28, 20233 yr

May I know how do you enable Panrost support Ubuntu 24.04 on Khadas Edge2? By Khadas SDK, I have built image which failed with followings: 1. Enabled Panfrost in defconfig. 2. Add kisak-mesa ppa, apt update and upgrade. 3. Replace mali_csffw.bin by Armbian mali firmware. After these, the gnome-settings shows the GPU is software vendoring. Hope to get your help~ Thanks!

• 0

  Reputation Points

• 0 replies
• 2.1k views
• 1 follower

Jacob Zang

August 22, 20242 yr

Only sharing what I managed to make working on the Orange Pi5: a Tvheadend server with satellite cards TBS 5527 and TBS 5520se. The rough path I followed: - recompiled the kernel in order to have "Linux tv" as a module (CCONFIG_DVB_CORE=m). This will be replaced by the tbs driver in next steps. - installed TVheadend from the armbian-config - compiled tbs drivers by following standards instructions....but: - had to add a CFGLAGS += -w to avoid some warning stopping the build (Makefile in the v4l directory) - had to disable the creation of the mc.ko (MEDIA_CONTROL) to avoid conflict with kernel built-in module (n…

• 0

  Reputation Points

• 0 replies
• 1.7k views

Tony3

February 12, 20233 yr

https://libre.computer/products/roc-rk3399-pc/ Can the computer run entirely on free software which is software you can use, share, modify and redistribute? The question includes firmware, microcode, etc, any piece of software that is running on the computer. If some devices on the computer requires non free software in order to work then what devices are they? And will the computer still work if you choose to not install the pieces of non free software in question? Thank you.

• 0

  Reputation Points

• 0 replies
• 1.4k views
• 1 follower

renky

May 24May 24

Hello, Recently I have upgraded Armbian on my PBP (w/o kernel). My current kernel is 5.10.60 #21.08.1. I know, it's old but the newer only makes PBP unusable at all - black screen on boot. My current issue concerns the PBP keyboard. Some keys started generating weird outputs. I have never faced with something like that. When I press 'q' - output is - aq2468 x - zxetuj c - cfghk d - DWRI 1 - the screen is dimming I have no idea if this is software or hardware issue. The computer was on the shelf. Nothing has happened to it physically. After years of fighting with this crap :( - I want to be sure if that is the last straw to put this com…

• 0

  Reputation Points

• 0 replies
• 2.4k views

bushw

November 15, 20241 yr

I have seen the uefi port for Rock 5B, which uses rk3588. seed this the opi5 use rk3588s which may lack some IOs, so I think maybe it can work on opi5 without modification. (actually i don't know how to modify to fit for it, need to learn) here i show you the result, I burn the uefi image (complied from balbes150's repo: https://github.com/150balbes/edk2_uefi ) to a tf card, then burn the image from balbes150's post to a usb portable ssd. then i change the dtb. The efi and grub can boot form tf card and then load the image from my usb ssd. successfully enter the Armbian and seems no big issues. But this can only work on the 2 type-A usb3.0, i try on usb2.…

• 0

  Reputation Points

• 0 replies
• 14.2k views
• 1 follower

Sumn255

January 4, 20233 yr

Hi i want to know if it’s possible to connect a raxda rock 5B with armbian on a touch screen Joy-it LCD10 V2 Module écran tactile 25.7 cm (10.1 pouces) 1280 x 800 Pixel by usb and hdmi ?

• 0

  Reputation Points

• 0 replies
• 1.3k views

cvogelzang

July 23, 20251 yr

hi all, so i skipped i beleive 2 releases of armbian for opi5 and i just downloaded latest and installed. i am not english native and armbian installs local langauge automaticaly wich is ABSOLUTELY NOT WANTED and quite annoying from my perspective. what i need is just plain en.us or english internatinal for system and keyboard but i cant get it. i tried changing it with armbian config but it doesnt do a thing, local language is always there and its a huge PITA. please armbian dudes, return to manual selection, i beg you. any tips how i can fix it so its just plain english? or how can i force installation to ask me what language to choose? thanks for an…

• 0

  Reputation Points

• 0 replies
• 2.8k views

Dim3nt0

August 15, 20233 yr