Framework and userspace feature requests

armbian-config provides configuration and installation routines for customizing and automating tasks within Armbian Linux environment. These utilities help streamline setup processes for various use cases. Key Advantages Lightweight: Minimal dependencies for optimal performance. Flexible: Supports JSON, TUI, CLI, and API interfaces. Modern: A fresh approach to configuration. Low entropy: Byte clean uninstall for most targets. Features System Configuration: Kernel management, headers, hardware tweaks. NFS and ZFS storage management. SSH user access tweaks. Sy…

I bought a TP-Link AC1300 "High Gain" WiFi adapter, in order to try to get a connection between my house and my garage. I thought that the included rtl8812 driver was the right one, but it turns out the AC1300 is the "V3" version of the Archer T4U, and it requires the rtl8822 driver. Well, it turns out that the driver at https://github.com/jeremyb31/rtl8822bu works straight up. I followed tkaiser's directions here: ...but changed "8812au" to "8822bu". Commands executed cleanly. I blacklisted 88XXau and rebooted, and everything worked great. And, I got the signal I needed, so it was worth the effort. Anyway, I just thought i…

Hi Armbian Support Team, I'm running a Kubernetes cluster on top of 8 odroid HC1 cards (3 master nodes & 5 workers nodes) - Armbian used version is : adrien@bilbon:~/git/k8s$ kc get node master-01 -o wide NAME STATUS ROLES AGE VERSION INTERNAL-IP EXTERNAL-IP OS-IMAGE KERNEL-VERSION CONTAINER-RUNTIME master-01 Ready master 44d v1.17.0 192.168.0.101 <none> Debian GNU/Linux 10 (buster) 4.14.150-odroidxu4 docker://19.3.5 - I'm currently observing those following events at Kubernetes level: adrien@bilbon:~/git/k8s$ kc get events --…

Requests to yandex blocked by most providers in Ukraine. So, apt failed to pull new updates when roundrobin returns yandex as a mirror

Hi I'm wondering if you are considering to support Orange Pi 5 support. I want to use the HDMI input to record 4k 60fps. At the moment I'm using the official orange pi image (kernel 6.1.43) and I've many issues in the kernel

Hi, I cannot exactly say why, but I never liked the 'emptyness' of the IP-Address on the SSH welcome message System load: 0.82 0.29 0.10 Up time: 1 min Memory usage: 3 % of 3867MB IP: 192.168.11.7 So I thought it needs a lot of space for a long Up time. So, the space is reasonable. Looking at the other information provided, which needs as well many letters? My suggestion to move it like this and adding: -Address (IP is not the complete term (Internet-Protocol): IP-Address: 192.168.11.7 Up time: 1 min Memory usage: 3 % of 3867MB System load: 0.82 0.29 0.10 adding 'Address' might fix …

Hi Folks! I think this would be great for testing Anbox easily on armbian. We are linux users (and we hate android), but in order to get ARM Linux attractive as desktop we may have to offer anbox. the kernel modules have problems on latest kernels so would be great to have them included already. maybe that makes the kernel "too big" and isn't acceptable, but that's up to you to consider it or not. best regards, Salvador.

On my odroid hc2 with armbian/bullseye I found some of the logs (both in /var/log and /var/log.hdd) empty, while they should have some contens (i.e. afpd.log, kern.log, user.log, ...). The empty files all have the timestamp of a run of armbian-ramlog at a recent reboot. In armbian-ramlog.log I found this for the run that created the empty files: rsync: [receiver] write failed on "/var/log/journal/0d4b1c13b9a14b6d9c746402b7d7ef6f/user-1000@0005d37f46f9961b-23c015a66b68d086.journal~": No space left on device (28) rsync error: error in file IO (code 11) at receiver.c(378) [receiver=3.2.3] rsync: [sender] write error: Broken pipe (32) Seems tha…

Dear All, I found armbian by chance and it's the best supporting linux solution for my orangepizero3 - will later start tinkering with orangepizero2w and orangepi5plus I'd love, along with Debian and Ubuntu, to have Kali selectable as distribution option - linux kernel, dtb, headers, u-boot, overlays and armbian-config would be the perfect base for it (and every other distribution imho) Being inspired by GoVanguard/karmbian, which is based on armbian's previous framework, I tried grossly "injecting" kali support into armbian branch v24.02 - but I'm lost; definitely no developer, just playing around specifically I'm stuck with "lib/functions/gene…

Hi, I have a tv box (mxq pro 4k 5g with rk3228a chipset). The wifi chipset is sv6152p. The armbian image "Armbian_21.08.1_Rk322x-box_buster_legacy_4.4.194_xfce_desktop.img.xz" works on it with the wifi driver ssv6x5x. I want to use librelec on it. When i install unofficial libreelec for rk3229/rk3228 box (kernel 4.4.194) the wifi don't works. The driver for ssv6051 is loading at startup but wifi don't works. Can somebody say to me how to compile ssv6x5x for libreelec. I don't know how to cross compile it. which source do i use : https://github.com/khadas/android_hardware_wifi_icomm_drivers_ssv6xxx …

Hi, I have found a RaspAP-webgui very useful if for example the device is deployed to an end user. Mostly is needed to set etherenet address DHCP or static. Rpi can work as access point and wireless client at the same time. This can be used for example to connect to the internet and sync RTC clock, or remote access through VPN - if for example one uses his phone to establish a hotspot. Now , I believe that armbian-config is also a powerful tool for configuration, but not helpful for end user who can be a noob. A web based GUI that could be used to configure network resources only would be appreciated. Just network, not all the delicate stuff as …

@lanefu, @TonyMac32 I am looking for support of native english speakers. I just wanted to install RPi-Monitor, listed all options to find it: armbianmonitor --help and saw this : armbianmonitor -M provides simple CLI monitoring - fixed-line output armbianmonitor -N provides simple CLI network monitoring - fixed-line output So, I thought what has been repaired (fixed) ? So, I tested the two options -m & -M and I saw, -m is with history, not scrolling rather new-line feed -M is dynamically refreshing in line (static), (fix, but not fixed) In short, I think the wording is a bit bumpy. My suggestion to change wo…

hi everybody... are you planning to migrate the IO scheduler to the NPU? in most cases, it is not involved on the devices that your operating system serves. This would give space for new perspectives.

Hello, I am looking for a Minimal Armbian for H3 chip with kiosk feature. I don't need desktop interface but still need a web browser to open at startup. Is there any version like this? I need it minimum because i will install on eMMC of the Orange Pi PC Plus and it has only 8GB.

Right - we're all pretty sick of systemd controversy, and no intent to rehash that all here again with mostly marketed fanboy-ism on either side. Without trying to be a geezer that want's to go back to the old days, I think that at least offering an interesting choice for Armbian using Devuan and the classic style of init might be worthwhile. An interesting perspective might be seen from our BSD brethren, who of course don't take to systemd lightly, yet still see things interesting they may want to incorporate: Benno Rice provides an interesting talk about it. Hey, let's not start yet another fanboy war abou…

Hi All, I would like to use the new RaspberryPI Camera ( IMX477 ) with armbian (with TinkerBoard S) and I was wondering if this is on the roadmap for development? If it's not I would like to attempt to submit a pull request, but I'm not really sure on how to pull the drivers into the armbian source. I can see the driver source here https://github.com/raspberrypi/linux/blob/rpi-5.4.y/drivers/media/i2c/imx477.c and the overlay source here https://github.com/raspberrypi/linux/blob/rpi-5.4.y/arch/arm/boot/dts/overlays/imx477-overlay.dts but I'm not too sure how to pull them into armbian, is there any articles/ help documentation y…

I have just found this video: https://www.youtube.com/watch?v=nSCj1b6PbaQ And I would like to ask what is missing to make a similar method to work on android phones? Is it only drivers? Touch screen amd sim management does not really matter for me, usb and wifi does. I think I am not the only one who thinks, my old 64 bit phones could be excelent servers.

Hello all, I just wanted to ask is there any consideration to support Radxa Rock (Standard/Pro) in any form. It is/was a Rk3188 based board with 2GB RAM and 8GB of flash. I'm using it as a VPN server with Debian 8 and it proved very reliable in all departments over the years. It was quite powerful for its time and I think it could prove to be very useful since it can be left to run without any active cooling or anything. I'm putting it here for consideration since I guess supporting RK3188 won't create any substantial workload, and it can do a lot even for today's standards. I have two of the devices and can use one of them for testing if required.…

Could you please add support for NanoPi R2C Plus (https://wiki.friendlyelec.com/wiki/index.php/NanoPi_R2C_Plus#Install_OS). I tried the R2S image and it failed to boot; I believe due to network hardware being different on this board (using YT8521S)

armbian merge android architecture armbian shared library replace android lib and android linux kernel. see image on github https://github.com/annopnod/Img/blob/master/armbian%20android_architecture.jpg

Hello, I would like to request that support for the PecanPi DAC (www.orchardaudio.com/pecanpi-dac) be added to Armbian. Asus recently added support as of Scetch version 2.1.11. To enable the DAC the following line is needed int the hw_intf.conf file: intf:dtoverlay=rpi-dac Thank you; Leo

I need the mongodb package to get some software up and running. Could a recent version be added please so it can be installed with apt? Instructions like ''https://docs.mongodb.com/manual/tutorial/install-mongodb-on-debian/'' just drive me crazy (not working etc etc)

May i ask about support for Khadas vim3l?

Hi everyone, I am trying to get TVHeadEnd working on my Helios4 NAS, which is currently running Debian Stretch with Armbian Linux 4.19.63-mvebu. The software has installed, and I can access the web GUI on port 9981. However, I cannot see my tuner device under TV adapters. If I type dmesg into the command line, I can see the RTL2838UHIDIR device connected to USB. However there is nothing listed under /dev/dvb. I'm wondering if Armbian might be missing some of the drivers that are included with full Debian. I would appreciate any help in getting my USB TV tuner working with Armbian. Thanks.

Hi Everyone ! I'm trying to find an Official full guide "How to setup and control GPIO on orange Pi zero devices". I find some parts of informations about it on the net but I don't understand the full steps to do it, it is not enough clear for me. 1) Some people are using unofficial python libraries. But I can see that these libraries seem being a fork from Rpi devices and all GPIO interfaces are not tested. 2) I have found the DT Overlay Guide but it explains only how to setup GPIO (not how to use it in a batch, python or c file) https://docs.armbian.com/User-Guide_Allwinner_overlays/ 3) Official sunxi documentation …

As WiringPi was never meant to support other boards nor does the author like to support other boards and it is officially depreciated now (http://wiringpi.com/wiringpi-deprecated/). I want to ask why not put some efforts into libmraa https://github.com/intel-iot-devkit/mraa and put it into the Armbian repository. I have already a fork which fixes Rock Pi 4 on recent mainline 5.3 kernels with updated debian build scripts here: https://github.com/bootsy52/mraa, so debian packages could be simple built using dpgk-buildpackage. Why I think it is a good idea to supply libmraa with the Armbian repository Supporting multiple boards is a…

Please add support for the FireFly ITX-3588J. Note that the Armbian Station M3 latest UEFI image boots unmodified on an SD card on this hardware, with working picture on one of the HDMI ports. (But no USB) So the partition structure is ok. 20230428-EDK2-EFI-current/Armbian_23.04_Station-m3_sid_current_6.2.0.img.xz So it is already close to a usable image once the relevant device tree bits are swapped out. I am not 100% sure the details yet of the uboot they ship, or even how to just install the uboot part to emmc but when I flashed the complete Debian 11 "firmware" they provide on the website link to the EMMC (using the linux command line loader…

The only thing I've had issues with on armbian, and that I often have issues with, is the default log2ram. As soon as you start doing anything that actually logs stuff, like access logs, or container logs and so on, the log space is not enough, even if allocating 500 MB RAM. And when /var/log fills up there are going to be crashes... in all kinds of ways. I have an ansible script that disables this now, but sometimes when doing dist-upgrade, log2ram settings come back (and also zram swap, which is also bad because kubernetes does not like swap, but thats not a disaster at least). So I simply propose to not make log2ram default, unless it can have some way to "…

New patches for mainline u-boot have been posted, so that espressobin should finally work now. That gives us a recent version of u-boot, compared to that old and unmaintained marvell fork. I opened a PR for OpenWRT to ship mainline u-boot/atf builds. Those also include distro boot: openwrt/openwrt#3360 And now we need testers openwrt/openwrt#3360 (comment) While this is a PR for OpenWRT, I boot vanilla debian with it. In the end the distro shouldn't matter Note: * All builds are currently CPU_800_DDR_800 only for stability reasons * There is no build for v5 with 2GiB RAM, does anyone have such a board? bu…

Running latest armbian buster on nanopi neo plus2 (https://www.armbian.com/nanopi-neo-plus2). Trying to set up a tc filter results in a "Error: TC classifier not found". The error can be reproduced by running: tc qdisc add dev eth0 root handle 1:0 htb default 10 tc class add dev eth0 parent 1:0 classid 1:10 htb rate 200mbit ceil 200mbit burst 15k tc qdisc add dev eth0 parent 1:10 sfq perturb 10 tc filter add dev eth0 parent 1:10 protocol all handle 0x310 flow hash keys nfct-src divisor 1024 According to https://stackoverflow.com/questions/61799390/enable-tc-of-iproute2-package-on-yocto, the CONFIG_NET_CLS_U32 is missing from the kernel configurat…

Was wondering if there is a utility similar to the Khadas Krescue boot utility that allows one to backup/install emcc images?? I found it very useful to backup my Khadas images as well as installing different os. The description is as follows: 'Krescue is an extremely small (21mb) operating system that you can boot directly from a micro-SD card or your EMMC. It is a “Swiss Army knife”, and you can use it to perform a variety of low-level SBC maintenance tasks. Most notable of which are backing-up your EMMC by dumping a raw-compressed .img.gz, and rapidly installing a new OS via flashing a .img.gz back into the EMMC. Krescue can download and install OS i…

From Armbian 20.08 onwards, I observed that htop loses its settings (e.g. show userland threads, process sort order) every boot. This is equally odd and frustrating, and until recently I had no idea what was happening to make this so. Then I discovered the cause - this script: /etc/NetworkManager/dispatcher.d/80-update-htop-and-offload-tx And indeed, on every reboot, it overwrites htoprc with some default settings. And I have tried but not succeeded to understand the intention was behind a decision to not allow users on SBCs to persistently change .htoprc any more. Can anyone add any context? Struggling to see how this makes…

I'm using Armbian's Ubuntu Bionic image on a Libre Computer AML-S905X-CC (LePotato). It appears the chromedirver package is not available: Package chromedriver is not available, but is referred to by another package. This may mean that the package is missing, has been obsoleted, or is only available from another source E: Package 'chromedriver' has no installation candidate My use case is, I need to file an online complaint with a regulatory agency. The complaint is filed via a Python script, and Python uses Selenium to operate the web browser and populate the four page form. Please provide chromedriver (Chromium) and geckodriver (Firefox/Iceweasel) fo…

The device tree is as follows https://github.com/torvalds/linux/blob/master/arch/arm64/boot/dts/rockchip/rk3399-eaidk-610.dts

AES has some major weaknesses, keys are breakable through timing attacks (dependent on implementation) due to it's design flaws http://citeseerx.ist.psu.edu/viewdoc/download?doi=10.1.1.140.2835&rep=rep1&type=pdf I'm not sure if hardware accelerated AES-NI is vulnerable to timing attacks. But the bottom line is that AES is very complicated and easy to screw up in the implementation such that it's vulnerable to various attacks. ChaCha20 on the other hand (XChaCha20 in newer kernels) is simple to implement, (much faster than AES when implemented purely in software) and easy to reason about. The most secure cipher available seems to be DJB's XChaCha20. XCh…

USB-C not working on NanoPC T4 with buster server 5.8y. USB-C port just delivers power but no communication at all. On debian stretch USB-C is working (tested aigain, HW is OK). Can someone provide a list with what kernel/image is what not working. I like to use the device for OMV. I guess someone has a list of known/reported issues? I don't like to test image by image to slowly identify surprise by surprise for each image/kernel. I like to use the device for OMV including dockers.

Hi, I’m using this panel: https://osoyoo.com/2019/11/12/instruction-for-raspberry-pi-7-dsi-touch-screen I've installed image: Armbian_20.08.1_Rockpi-4c_bionic_current_5.8.6_minimal.img The system does not work with the Raspberry PI Touchscreen. The OSOYOO panel works fine if connected to Raspberry PI 3B+. Any solutions?

Hi all I have been using https://github.com/billw2/rpi-clone to clone sd cards as it uses rsync. It's much quicker than imaging and will clone larger cards to smaller if there is space. The thing is it expects a raspberrypi and so doesn't update the UUID in the armbianEnv.txt and fstab. If I manually do this then the clone is bookable and works fine. I cant script (yet), so if anyone could take a look at the script on git and suggest how this could be changed to work with armbian also i would be really grateful.

Is there a backup and restore script on armbian using rsync and NFS for backup entire system to NAS like there is on dietpi (dietpi-backup) which is excellent?

I would love to see support for modems based on the SIM7070G chip. Along with Quectel’s BG96, SIMCom’s 70x0 and 7x00 families seem to be the leading choice when it comes to IoT-related applications with LTE-M and NB-IoT. Shenzhen-based AND Technology manufactures and offers two very affordable modems (< USD 25) using the SIM7070G: BK-SIM7070G (a break-out board with serial interface) -> AliExpress DG-SIM7070G (a USB stick/dongle) -> AliExpress Sidenote: Waveshare has a Raspberry Pi HAT based on the very same chip –> SIM7070G Cat-M/NB-IoT/GPRS HAT SIMCom as chip provider offers excellent documentation on their …

Hello Armbian community My HiFiBerry DAC HAT works well on my Raspberry Pi 3B with RasPiOS. However, I would like to put it on my Rock64 to use the higher Ethernet and USB speed it offers. As far as I can tell, HiFiBerry DAC is in the mainline Linux kernel - it is mentioned in the source code, but I do not understand programming, so I cannot see if it is used. Is the HiFiBerry DAC supported in Armbian's kernel? If so, how can I activate and use it? I put the HAT on the Rock64 and installed Armbian_20.05.2_Rock64_buster_current_5.4.43.img.xz , and it booted without problems, but I could not get sound out of the HiFiBerry DAC, and Alsamixer showe…

Good day. I built an image for SDCARD on the rockchip3568 board using the project from here https://github.com/armbian/build This framework creates an image for SDCARD, consisting of two partitions: 1 - boot (Fat32 - 256 MiB) 2 - root file system (ext4) (all remaining capacity on SDCARD, I use a 16GiB card) I need a different, custom, file system partition. How can I make three partitions, for example of these sizes: 1. boot - 256MiB 2. root - 2GiB 3. work - the entire remaining capacity of the SDCARD while the size of the image file is not all 16GiB, but 256MiB (boot) + 2Gib (root) + 256MiB (work) = 2.5GiB and the last partition …

Hello, there has been a linux kernel issue in the pci part. The symptoms are Armbian kernel panics. This has already been discussed in the armbian forum: A patch has been supplied by @Pali and Marek Behún in the drivers/pci/quirks.c file. Thank you guys very much for that! Bug report can be found here:https://bugzilla.kernel.org/show_bug.cgi?id=212695 And patch can be found here: https://lore.kernel.org/linux-pci/20210317115924.31885-1-kabel@kernel.org/ This is the actual patch content: --- drivers/pci/quirks.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c inde…

Under Ubuntu when you install using BTRFS and Debian when you install to BTRFS using the Calamares live GUI installer, both installers create a subvolume called @home for the /home directory and another subvol called @ for the rest of the filesystem. This layout enables users to use timeshift to easily (and automatically with timeshift-autosnap-apt) create BTRFS snapshots and restore them using the command line or the timeshift GUI and restore their OS whilst optionally keeping users files stored under /home intact. I would like to see the armbian installation script configure BTRFS in this same manner.

Running buster on a ZeroPi but softy does not uninstall. Also home-assistant does not seem to install, followed rpi3 guide on homeassistant and got it to work in docker container; Softy reports homeassistant to be installed.

As an ansible neophyte, I'm looking through the 'ansible facts' trying to figure out how to positively identify an Armbian system, with the goal of contributing a patch to the k3s project to improve support for Armbian. Toward the end of the k3s-ansible playbook, they try to write some kernel options to a file in /boot. According to the comments, they've identified by Armbian machine as Ubuntu. At any rate, Armbian seems to want these flags in /boot/armbianEnv.txt, and the file ansible wants to modify doesn't exist so the update aborts: fatal: [t4]: FAILED! => {"changed": false, "msg": "Destination /boot/firmware/cmdline.txt does not exist !", "…

Dear developers! Could you please consider possibility to change default kernel config, used in release versions of Armbian, so it enable to forcefully unload of kernel modules ( to do this config option CONFIG_MODULE_FORCE_UNLOAD needs to be enabled). This is seldom but regular needs for me and I beleive for many others in case of external hardware malfunctions, for example. Previosly I have used selfcompiled version of Armbian 5.15 where named option was enabled and anything was fine. Now I have upgraded to Armbian 21.08.1 Buster by installing release version of it because it seems dramatically more complicated to compile by myself. Now in …

I've noticed that the AppArmor kernel config was switched off from kernels 4.19.x onwards. I've searched the forum and the github issues but haven't found any problems related AppArmor. I'm using the current kernel for cubox (5.4.x) that I've compiled by adding AppArmor config back, everything works as it should for a headless system. Would it be possible to add the AppArmor kernel config back? I can help with testing on the following boards: cubox, olimex lime2, cubietruck

Hi all, While building a custom image that needs to do some things at the end of the first bootup and reboot, I ran into some issues with armbian-firstrun.service. It currently has Type=simple, which means dependencies will be started when armbian-firstrun is *started*, and there is no clean way to wait until after it has *finished*. Looking to fix this, I noticed some other things that could be improved in this area, such as using systemd's first-boot-complete.target and ConditionFirstBoot to more simply manage first-boot-only services. I'm considering implementing some changes and submitting them in a PR, but before I do that, I'd like to get som…

ksmbd is a more performant version of Samba. Located here: https://github.com/cifsd-team/cifsd and https://github.com/cifsd-team/ksmbd-tools Given that most devices supported by Armbian are underpowered, it would be great to get this installable via apt.

The "create access point" utility in `armbian-config` has several bugs that prevent it from working, due to changes in the default installation since it was written: - hostapd does not install a default configuration file at `/etc/hostapd.conf` - hostapd is installed masked by default - dnsmasq fails to start because systemd-resolvd launches first as the default DNS resolver I can write patches to fix this utility, but I'm wondering if it will ultimately be worth it. I noticed this access point utility doesn't exist in the `armbian-configng` repository. Is that because Armbian is dropping this utility, or no one has gotten around to it yet? …

Hi, I have a friend who is blind and cannot use the standard ncurses armbian-config gui. Is there a way to switch to a simple text version, and if not what are the chances of a text version option in the near future? ?Peter

Hi there! I've tried your image on Two Trees SK1 3d printer, it has a custom OEM of the SKIPR card. There's no HDMI so I can't see what happens. But putting an ethernet cable it doesn't get DHCP address. The card has also a wifi that I can't identify, not visible with lcpci or lsusb. I put a picture of the card and a schema.

The reason MX Linux performed so well is, because, it uses some core components from Antix Linux Distro, which is optimised. based on Debian's "stable" branch. MX Linux is a cooperative venture between the antiX and former MEPIS communities, using the best tools and talents from each distro. It is a midweight OS designed to combine an elegant and efficient desktop with simple configuration, high stability, solid performance and medium-sized footprint.

I know this topic was requested many many times. but I would like to introduce more reasons about why to do so. Igor, I don't like RPI, and many of you also don't like it. but I am thinking on Armbian rather than RPI 1) supporting RPI would be a plus for people that use sd with RPI4. armbian works flawlessly on sr cards. 2) armbian need recognition and founding and supporting a mainstream SBC like RPI could bring that! 3) armbian is the best OS for ARM Linux. 4) something similar to the reason 2

Would be possible to have Armbian for the new Rock Pi X with Intel X86 processor? Thank you in advance and HAPPY NEW YEAR!

The BananaPi CM4 doesn't play well with a number of third party base boards in that often, USB does not work on them. Usually, that is because the third party base board designer connected the USB hub IC to an SOC OTG port without connecting a line to switch the OTG port into host mode. The problem was demonstrated at least with the Waveshare CM4 Base Board B and the MCUZone POE baseboard. In the Banana Pi forums, Sinovoip engineer "August" posted a DTBO for Ubuntu 20.04 which solves the issue by forcing host mode. Below is the DTBO decompiled to DTS. I would like to request that this overlay be updated for the Armbian kernel and included as an optional overlay into …

Hey guys, Just wanted to ask if there is any plan on making a version of armbian for the orange pi 5 Max. I have one and am using the official image but am having problems with hardware acceleration when attempting to use it in jellyfin docker. So I thought some files might be the issue and I previously set up my system with armbian in the orange pi 5 and it worked. If you guys did or are planing to make one, please let me know.

Would there be a way to add a configuration option to armbian-config to disable built-in button being used for shutdown? Currently I have to remove the r_gpio_keys section in the DTB and compile. Seems like something armbian-config could do?

If you curl -I http://apt.armbian.com over and over again, you will receive a 302 redirect to what seems to be a random mirror. I am wondering how I can help add some sophistication to that randomness. As someone downloading updates from the US, it's a big exercise of patience to download at a rate of 20-60 KBps. As each package request goes to the redirector every time (since it's not a 301 redirect), some packages download at a good rate but plenty are very slow for me. In contrast, when I download an Armbian image from bittorrent, I can get 9MBps. I know that everything here is provided for free and I am grateful! I am asking how I can help make this…

Hi, can somebodey please make armbian for Asus Thinker board 2 / 2s. I would be very thankfull.

Pine64+ Allwinner A64 I can find Seafile Client in the Armbian Software Packages. Could be have the Seafile Server packaged as well? Nextcloud is full on corporate software. Seafile may be a suitable alternative for desktop users.

Can AVIF support be added to LibVIPS? It works fine on the amd64 version of Ubuntu 24.04, so I'm assuming Armbian needs to update the package. Current bug: Failed to process avif file version: unable to call heifsave_target heifsave: Unsupported compression It's not a HEIC image, this is how LibVIPS encodes AVIF files.

In this topic solved the problem orange H3 with tv out. Can you add this TV-out feature to the new armbian focal release for orange pi H2+ / H3 ?

Hi here, as a hobby project I forked Armbian repo to add support of someone "new" hardware, mostly around 3D printing and mostly because no support from the vendor side. At this moment I have following almost independent components: a kernel module for ST7796 (LCD controller connected via SPI and working as frame buffer module/device) a patch for HDMI configuration to support MKS IPS50 screen (800x480, 5:3 aspect ration with some weird EDID) configuration with related patches for MKSPI, SKIPR and a few derivatives boards + some DTS overlay for one related/specific use case. It's a "Renegade ROC-RK3328-CC" based board(s) which wa…

Would be nice to see bullseye image for NanoPi NEO 2

https://iridiumbrowser.de/ From the site: "Iridium Browser is based on the Chromium code base. All modifications enhance the privacy of the user and make sure that the latest and best secure technologies are used.Automatic transmission of partial queries, keywords and metrics to central services is prevented and only occurs with the approval of the user. In addition, all our builds are reproducible and modifications are auditable, setting the project ahead of other secure browser providers." Any chance of getting it in Armbian?

While I know a lot of boards don't have support for PCIe the RockPro64 does. I'm using it to drive a 10gb NIC (even though it's limited by the number of available lanes to around 8Gb/s). Armbian doesn't provide any native support for 10Gb cards so I've been having to build kernels with support for the Intel and Myricom cards. Is there any possibility of including support (either as modules or built in) in the future? Thanks for the consideration, Chris

Particularly, the linux.config file is expected, better to enable kernel 6.0 ? Cheers

Hello Armbian team, I’m a big fan of your work and use Armbian on all my single-board computers, including Orange Pi, Banana Pi, and Raspberry Pi. However, I’ve noticed a recurring issue during bootstrapping: identifying the device on the network. Enabling the avahi-daemon could make it easier to connect to or discover the device using mDNS. What are your thoughts on this?

This was my goto distro and Im going to have to find another one because of the lack of support for eMMC going forward. Why has the 5 kernels led to the drop in support for eMMC?

By defaul armbian should be light so I think it should use LXDE , runit and no pulseaudio

Hi, Linux 5.10 has supported hardware PRNG, SHA, MD% for all sun8i-ce (H3/R40/A64/H5/H6) boards, and supported hardware TRNG on H6. Please consider enable CONFIG_CRYPTO_DEV_SUN8I_CE_HASH, CONFIG_CRYPTO_DEV_SUN8I_CE_PRNG, CONFIG_CRYPTO_DEV_SUN8I_CE_TRNG for hardware offload support. Thanks.

Hi, I am running Armbian Bionic on a banana pi pro and want to use it as a 1-wire busmaster for some temperature and humidity sensors, that are connected to the 1-wire-bus via a attiny84a microcontroller, that simulates an DS2438. I added into /boot/armbianEnv.txt the following code: overlays=w1-gpio param_w1_pin=PI3 Now my sensor is recognized, but the system cannot initiate it, because the respective kernel module is not part of the kernel used in Armbian: dmesg | grep w1: [ 8.708726] w1_master_driver w1_bus_master1: Attaching one wire slave 26.03000084e1bb crc bc [ 8.771631] w1_master_driver w1_bus_master1: Family 26 for 26…

Hello, I'm setting up my Odroids with Ansible and managed to automated almost everything. I just got a HC1 and read on the download page that I should load optimized board configuration in armbian-config. Sadly, armbian-config seems to be an interactive only tool. Are there ways to automate armbian-config? The easiest way would be command line arguments. I also tried to understand what the DTB menu options actually do from the source code but was unsuccessful. My best idea now is to use expect, but that doesn't seem stable: #!/usr/bin/expect set timeout 10 spawn armbian-config sleep 5 # Enter System menu send "\n" sleep 5 # Enter …

Hello everyone, I am looking for an answer regarding the Orange Pi PC2 Armbian OS is 32-bit or 64-bit version? Thanks in advance. Best regards, SaiHou

Currently we can not use http only protocol to access all armbian packages . There is a http => https redirection . This redirection prevent the usage of squid-proxy to optimize bandwidth . I understand in other side the usage of https , the need of privacy/trust . Can you propose a http-only alternative ? Multiple solutions are possible : no redirection , but you can still promote https urls a second url that will be provide a http only access to repository because we can change the user-agent for apt via this parameter Acquire::http::User-Agent a rule based on user-agent that prevent …

I am running armbian on a rock64 with a usb bluetooth adapter. Adding bluetooth devices with the blueman app is very hit-or-miss for me, mostly misses. I installed the blueberry app, which I have had good luck with in the past, and device connection has been great. Every device connects on the first try. Blueberry is easy to install because it has no arch, and it also appears to be relatively light on resources. So I would like to suggest that the devs consider including it in armbian by default.

I've checked a few places, and noticed that the NanoPi NEO2 has had an upgrade to its CPU voltage regulator that does not seem to be reflected anywhere; the sunxi-linux wiki still reports that the regulator can provide only 1.1V, and I see no evidence of a regulator for the CPU in the device tree in the master mainline kernel branch. On the NEO2 V1.1, the CPU voltage regulator has been updated to provide GPIO-based voltage regulation, giving a selection of 1.1V (the same as the original board) or 1.3V (this setting is new). I'm quite new to kernel/device tree modifications, so I was wondering if anyone else was aware of this, and, if nobody is willing to incor…

Are there any plans to add an option for full disk encryption to the installer ? I am using the RockPro64 if that matters. I notice that no ARM distro I have tried supports this for the RockPro64 currently so i'm not sure if it is just a low priority or if there is a techncial reason to not have it. Regardless if it's doable I would appreciate it being added down the road.

Hello, While there are a bunch of vnc and x11 options to access the box remotely, I found chrome remote desktop as a very useful tool to integrate access to different hosts wherever you are. chrome remote desktop 'host' runs on many platforms including, of course, debian. Installation does not work because package gets downloaded from Google directly and it is compiled for x86. The .deb package can't therefore be installed on armbian. Any chance chrome remote desktop could be compiled for armbian? I believe source code is under Chromium project but I could not find it. Ideas?

Hello, i've preordered an Helios64 and would like to install the main os on a f2fs formatted sd-card. your documentation says that this is not possible, and i would love to see this possibility. i guess most eMMC devices would also benefit

Please add Linux Mint 21 ("Vanessa") support to armbian build script.

Armbian Buster for Orange Pi Zero (kernel 5.4.45) is using an old version of gpsd which doesn't yet support ubxtool Armbian Focal does not have this problem Can Armbian Buster have a newer version of gpsd and gpsd-clients to support ubxtool Thank you

moderators/admins, I'm thinking it could help to put Orange Pi Zero 3 in its own unmaintained boards sub section, it is likely there'd be more threads related to this and to move this thread and the other thread into the new orange pi zero 3 board section

I Wish for cameradrivers on csi port to be added in kernel or to be installable from a repo. OV5640 for H3 and H6 GC2035 for H3 and H6 OV13850 For RK3399 .... thanks, friendly regards. joel

"Type armbianmonitor into the console - we develop this to get the best out of those board without using much resources." in the documentation, maybe add Armbian tools - armbian-config - armbianmonitor ....

Hi, I'm not sure if this is the right place, but I used the contact form twice back in august and september and haven't received any reply The mirror list on the github page is not updated either Anyway, as a raspberry pi lover, I've set up a mirror to support the development of armbian: http://repo.jing.rocks/armbian-apt https://repo.jing.rocks/armbian-apt rsync://repo.jing.rocks/armbian-apt http://repo.jing.rocks/armbian-dl https://repo.jing.rocks/armbian-dl rsync://repo.jing.rocks/armbian-dl sync frequency: every 4 hrs upstream: rsync://rsync.armbian.com/{apt,dl} armbian-archive …

** EDIT - noise alert - already covered by F3 utility *** Is there a shell script that one could recommend for newbies that would work similarly to the H2TESTW program? And if so, should it be included in Armbian - perhaps on a first-run even throwing up a big warning to the op? Kudos to you guys for putting all that work into SD card knowledge and programming into Armbian in the first place. In fact, the good engineering of sd card preservation with Armbian is what drew me to it initially. Heck, for my use case, I may never really need an emmc. Anyway, I'm just not up on what an up to date alternative to h2testw is these …

Currently lowest download speed limit is hardcoded to 500k (build/lib/functions/general/downloads.sh, line 79) --lowest-speed-limit=500K As I build my first image, I hit a lot of times this limit 🙈 Wouldn't be nice if this limit was configurable? I'm willing to try to implement it myself. Should I create an issue on Jira or GitHub or is the forum the right place to discuss it? Where would be the right place to add this parameter? userpatches/config-default.conf?

Too many years ago I had Armbian whis was based on Debian Jessie with MySql. And there I've created database with three tables ENGINE = InnoDB. When I download and rolled Armbian on Debian Buster based I note that MariaDb instead Mysql is on it. Now using MariaDb I can not make dump of my database. I found out here https://stackoverflow.com/questions/19926802/mariadb-crash-table-doesnt-exist-in-engine-cant-recover-tables that I can make dump with Mysql only

please add option in armbian-config for autologin in shell with root or non root user.

Hello, I noticed that overlayroot package is absent in armbian buster. Is it possible to add this feature to Armbian Buster? Cordially, M.B

There are a lot of the new wider monitors coming out. I have had one for several months. None of my Armbian boards support it. Some won't display at all, some default to a single lower resolution, and several will only allow to set to 1920x1080. Doesn't HDMI interrogate to discover resolutions and then match capabilities? I have no clue how HDMI actually works but it would be great if Armbian looked proportional on those monitors ;] Thanks

As many boards have now kernel 5.9.x may we have support for zstd in mkinitramfs?

Not sure if this is the best topic to post this under. It might be cool to get support going for the STM32MP1. I would certainly be willing to put some work into this. I have a lot of experience with Armbian and the A20. Whats a good place to start?

Hello, i am new here, an experienced back-end developer from Hungary, and my hobby is mostly doing some IOT stuff in my free-time. I'm big fun of the Armbian project a long time and checking its progress time to time cos its seems perfect for IOT usage and the NanoPi R3S was specially chosen by me for my ongoing project because of the Platinum support of the product as it seemed to be perfect fit with good enough video support to make IOT server with remote app for admin functions. Sadly as it seems the hardware acceleration is not supported i guess because there is no HDMI port on the product but with Panfrost + VirtualGL it could be a capable rem…

Thanks for Armbian, I very much enjoy it on my Cubietruck server. Forgive my ignorance if I have misunderstood something, but I believe that the Lima opensource Mali drivers will shortly be part of the kernel. https://lkml.org/lkml/2019/5/8/1122 What is the likelihood of Armbian supporting a hardware accelerated desktop using these drivers for the cubietruck and similar boards? It's an old board and is well supported by the project as a server already, so it would be understandable if it was out of scope.

I suggest allow armbian script put deb-src without comment. For example I want to get system with deb-src packages. Of cause I can add deb-src via userpatches/customize-image.sh but it is not so easy. May be armbian add option like INSTALL_KSRC that allow user to get OS with uncommented deb-src in /etc/apt/sources.list It also helps in customize-image.sh For example: Main() { apt-get install libxcb-xinerama0-dev -y It will Error: You must put some 'deb-src' URIs in your sources.list The solution may be: ./compile.sh REPOSITORY_INSTALL=deb-src general.sh

Hi. I am trying to control an i2c device at the u-boot stage. i2c 0 bus is activated through /boot/armbianEnv.txt file After settings some i2c commands at /boot/boot.cmd i checked the i2c sdk and sda pins via an oscilloscope. But neither output a signal. i2c dev 0 i2c mw 0x3c 0x00 0xae I included above commands and tested. Can I know how to activate or use i2c at u-boot level? image: ARMBIAN 5.75 stable Ubuntu 18.04.2 LTS 4.19.38-sunxi