Other families

The UN-official, UN-supported, UN-timely, UN-derrated... Exynos 5422 MEDIA TESTING SCRIPT Yes, the script is somewhat untimely, because it comes when including kernel 4.14 in Armbian next images is getting troublesome. And underrated, because this old SoC seems to be losing the focus of attention in favor of some more modern powerful ones. But it is still a great SoC, and it is worth trying to get the best out of it. The script will provide the installation of all the libraries and system configurations necessary for GPU accelerated X desktop, Chromium WebGL,VPU decoding/encoding acceleration through MFC, and GLES 3.1 / OpenCL 1.1 support. …

• 1

  Reputation Points

• 34 replies
• 39.5k views
• 5 followers

Stylxd

April 6, 20206 yr

Hi all, I got my helios4 sometimes in 2019 and it was one of the best purchases I ever made. It has served and was solid as a rock. Unfortunately all that ended couple of days ago when I noticed the Helios was not powering up properly, think it was the power supply not connected well (because I just recently changed the location) I removed and fitted the PSU a couple of times, I could see the led light come on but still it would not boot properly. By the time I found out what the real problem is things had gone worse, the reason for the incomplete boot was the SD card has been removed. Unfortunately, it seems my constant removing and refitting the PSU to …

• 0

  Reputation Points

• 1 reply
• 3.1k views
• 2 followers

TRS-80

March 31, 20224 yr

Hi there, I'd like to understand the best way to handle updates on Armbian… My OS is: odroid ) uname -a Linux odroidxu4 5.4.225-odroidxu4 #22.11.1 SMP PREEMPT Wed Nov 30 10:55:16 UTC 2022 armv7l GNU/Linux odroid ) lsb_release -a No LSB modules are available. Distributor ID: Debian Description: Debian GNU/Linux 11 (bullseye) Release: 11 Codename: bullseye And APT says: The following packages have been kept back: linux-dtb-current-odroidxu4 linux-headers-current-odroidxu4 linux-image-current-odroidxu4 linux-u-boot-odroidxu4-current The habits tell me to update however the experience taught that I could breaking somethin…

• 1

  Reputation Points

• 2 replies
• 3.7k views
• 1 follower

freezr

February 6, 20233 yr

Hi, I've just ordered a Xu4 to use it as a desktop and I have never used armbian before. Is webgl is running fine in chromium browser? I want to run Construct 3 on it. Thanks in advance!

• 1

  Reputation Points

• 37 replies
• 17.7k views
• 2 followers

rooted

April 27, 20188 yr

I had to roll back and use apt hold on the 2 corresponding packages to remain on the "good" LTS kernel 5.4.253 that supports fstrim on extremely popular Crucial SSDs that support it. It's impossible to get the maintainer Joe to reply. Is there a triage way to have someone contact him and make him aware of this issue? I have zero complaints about his work, but SATA TRIM commands are a must have on SBCs that have drive bays. It dramatically increases lifetime of NAND based storage devices. Please tell me what to do. I found filing a simple bug report would be counter productive as I want to investigate why later Kernels are either compiled without …

• 0

  Reputation Points

• 4 replies
• 3.5k views

belegdol

January 17, 20242 yr

Where can I buy Helios4? Are you still planning to sell it? Helios64 is too expensive honestly and since OpenWRT supports this device.

• 0

  Reputation Points

• 2 replies
• 4k views
• 1 follower

TRS-80

November 20, 20205 yr

How to install Armbian on an eMMC module? Simply using Armbian Imager with the image file doesn't work—the system won't boot. The official Radxa OS boots fine from the same eMMC module.

• 0

  Reputation Points

• 3 replies
• 1.6k views

Hackerman

June 28Jun 28

The Armbian htop fork doesn’t show the cores frequencies. Is this a known problem? The frequencies are available like on any other computer in the sysfs entries (cpufreq driver).

• 1

  Reputation Points

• 10 replies
• 7.9k views

memeka

January 23, 20197 yr

As far as I can see on odroid wiki for the lcd and fan enabling the links leads to ubuntu files. I want to install latest armbian for odroid xu4q board and omv5 so I'm wondering if I can use these files or do I need some other files to enable lcd and fan on cloudshell2 + odroid xu4q and armbian?

• 0

  Reputation Points

• 3 replies
• 3.9k views
• 1 follower

Igor

August 30, 20215 yr

Hi, A strange error appeared with the last kernel update on an Odroid HC2. From the home in the terminal displays this error under RX totay: RX today: Error: Interface "--oneline" not found in database. The board is hosting an OMV instance under Armbian Bullseye Linux version 5.4.212-odroidxu4. Does anyone have any idea about the origin of this message which does not seem to disrupt the NAS operation. thanks konki

• 1

  Reputation Points

• 5 replies
• 6.9k views
• 1 follower

porg

January 1, 20233 yr

Is there a repository with older Armbian images available? I'm looking to install OMV6 on my Odroid HC1 (XU4), when I get Armbian Bookworm installed OMV scripts says to use Buster or Bullseye, but I cannot find an Armbian Bullseye image anywhere. I'm not super proficient with Linux (I know enough to get myself in trouble) so compiling my own image is not something I think I can do. Any help would be greatly appreciated. Edit: Nevermind...I'm an idiot...didn't notice the GIANT button for Archived Images. Apologies. Thanks, Robert

• 0

  Reputation Points

• 1 reply
• 3.4k views
• 1 follower

charly_53

July 29, 20233 yr

Reverting "linux-firmware-raspi" from "12-0ubuntu1" to "10-0ubuntu1" resolves this issue.

• 0

  Reputation Points

• 1 reply
• 5.2k views
• 1 follower

DeMiNe0

June 22, 20242 yr

Hi The problem with Odroid HC1 is that BIG cores cannot go higher than 1.50Ghz and LITTLE cores cannot go higher than 900Mhz! Why is the CPU so throttled now? This sbc can and could work at higher clock speeds without any problems. Forcing 2Ghz and 1.50Ghz via cpupower does not help... Bullseye A 23.8.27 K 6.6.31

• 1

  Reputation Points

• 2 replies
• 2.5k views
• 1 follower

jshc1

June 4, 20242 yr

Hi everyone. Just after a bit of advice before I take the plunge and boot up armbian on my Mi10 Pro. I'm using it currently as a modem, it's tethered to my Deco setup so its only used as a modem. Obviously the stock HyperOS isn't that great at having anything that is remotely useful for this purposes. So I'm hoping that Armbian could be the answer I'm looking for. If someone could assist/answer the following; Is there by modem/router type software that I can use on Armbian? Does the 5g modem get recognised by Armbian? Does the USB C slot get recognised so any usb hub that I plug in will work? Will ethernet teth…

• 0

  Reputation Points

• 1 reply
• 2.6k views
• 1 follower

Igor

September 15, 20242 yr

Hi all, I've pre-ordered my helios4 and was so excited to finally receive my new NAS after a few months of waiting. I love this project and want to see this project to grow and maybe inspire others to create similar projects as this one. That said, I was really disappointed when I finally started my board and realized that the UART to micro usb was broken when I plugged it in my computer. No USB device is at all recognized(on linux nor on my mac). At first, to eliminate any potential problems, I tried at least 6 different micro usb to usb cables thinking that a cable could be broken... it happens some time. With all 6 cables tried, never did I get …

• 0

  Reputation Points

• 3 replies
• 3.4k views

Colink

September 24, 20197 yr

Hi - is it possible to install linux-headers from repositories on the XU4, so that DKMS builds of wifi adapters will work properly? I'd like to have DKMS handle rebuilding the driver for my RTL-8812au based wNICs on the XU4, as it does on my x86-64 devices. Thank you!

• 1

  Reputation Points

• 5 replies
• 4k views
• 1 follower

Jim Salter

July 1, 20188 yr

So I tried switching my MMIO GPIO to /dev/gpiomem from /dev/mem and it doesn't appear to support the GPZ block https://wiki.odroid.com/odroid-xu4/hardware/expansion_connectors#con_11_-_2x6_pins The address is 0x03860000. Hard Kernel's wiringPi doesn't seem to support this either. Should this be a question I ask Hard Kernel folks? https://wiki.odroid.com/odroid-xu4/software/gpio_register_map

• 0

  Reputation Points

• 1 reply
• 3.2k views
• 1 follower

sgjava

December 6, 20205 yr

Hi, I have been running Armbian Buster on an Odroid HC1 for a while but today one upgrade is held back: The following packages have been kept back: libc-dev-bin 0 upgraded, 0 newly installed, 0 to remove and 31 not upgraded. This is why: $ sudo apt install libc-dev-bin Reading package lists... Done Building dependency tree Reading state information... Done The following package was automatically installed and is no longer required: linux-libc-dev Use 'sudo apt autoremove' to remove it. Recommended packages: manpages manpages-dev The following packages will be REMOVED: armbian-config build-essential g++ g++-8 libc6-dev libstdc++-8-dev…

• 0

  Reputation Points

• 1 reply
• 3.5k views

Rob van der Linde

April 2, 20224 yr

For marvell-mvebu build DRBD is not supported, the module is missing in either current and edge config a grep of CONFIG_BLK_DEV_DRBD in build/config/kernel from the git build repo shows that most boards have DRBD compiled as module except some few exceptions. One of these few exception is mvebu (ClearFog Base/Pro, ESPRESSObin, Helios 4). I don't understand why. DRBD is a very nice and secure block device which provides network block replication (raid over network), and it is widely used. DRDB compile and work flawlessly on helios4 with the mvebu kernel. But we are obliged to compile the kernel or only the module, which is somewhat painful. As I have …

• 0

  Reputation Points

• 1 reply
• 3k views
• 1 follower

Heisath

November 5, 20223 yr

Hi, I programmed the latest image Armbian_26.2.0-trunk.197_Beagley-ai_plucky_vendor_6.12.49_minimal.img.xz on my beagle Y AI, and connected the power and HDMI and inserted a Dell USB HID for keyboard and mouse, but in initial boot I am not able to use the keyboard and due to this not able to configure the device. Any help will be appreciated. Thanks, Ankit

• 0

  Reputation Points

• 2 replies
• 1.5k views

flipper

March 15Mar 15

Is it me or it the mv_xor driver being loaded late? ``` [ 0.007976] xor: measuring software checksum speed [ 0.164062] xor: using function: arm4regs (2534.000 MB/sec) [ 0.316068] raid6: neonx8 xor() 1096 MB/s [ 0.452063] raid6: neonx4 xor() 1378 MB/s [ 0.588069] raid6: neonx2 xor() 1610 MB/s [ 0.724066] raid6: neonx1 xor() 1346 MB/s [ 0.860075] raid6: int32x8 xor() 328 MB/s [ 0.996072] raid6: int32x4 xor() 369 MB/s [ 1.132082] raid6: int32x2 xor() 332 MB/s [ 1.268063] raid6: int32x1 xor() 285 MB/s [ 1.268067] raid6: .... xor() 1610 MB/s, rmw enabled [ 1.665163] mv_xor f10608…

• 0

  Reputation Points

• 3 replies
• 3.3k views
• 2 followers

Mangix

December 14, 20205 yr

Hello, I suffered a power outage and my odroid hc1 won't boot since. I also updated the kernel to 4.14.141 but the system did come back up after reboot to that kernel, it is just the power outage which seems to have caused problems. I have tried connecting the sd card and the to the laptop and ran fsck on them, no issues were found. Is there a way to debug the booting issues by say, forcing some sort of log to be writen to sd card? LED wise, red (power) LED is on, whereas green (SATA) and blue (system) seem to turn on and off repeatedly; green first, blue second, and then they both turn off at the same time. Thanks!

• 0

  Reputation Points

• 15 replies
• 9.6k views
• 3 followers

Igor

December 2, 20196 yr

Hi, On Odroid HC1 512GB SSD with Armbian_20.02.1_Odroidxu4_stretch_legacy_4.14.170 I've got great SSD SATA samba write speed - 110 MB/s! But I have poor only 35MB/s on Armbian_20.02.1_Odroidxu4_buster_current_5.4.19_minimal With Armbian_20.02.1_Odroidxu4_bullseye_current_5.4.19 I have the same poor 35MB/s speed. I've done three identical installations using my checklist: Spoiler #Armbian install on Odroid HC1 # Flash Armbian_<>.img #Upgrade apt update apt upgrade #Move rootfs to SSD # Make rootfs partition fdisk /dev/sda # Make filesystems …

• 1

  Reputation Points

• 3 replies
• 3.4k views

Igor

March 5, 20206 yr

Hello, first of all please excuse my bad englisch! I have an Odroid HC1 an running OMV 5 with armbian since 1,5 year. When I`m check dmesg i see some problems: root@odroidxu4:~# dmesg |grep imprecise [ 47.446247] Unhandled fault: imprecise external abort (0x1406) at 0x00000000 [ 47.511679] Unhandled fault: imprecise external abort (0x1406) at 0x00000000 [ 47.521702] Unhandled fault: imprecise external abort (0x1406) at 0x00000000 [ 47.591656] Unhandled fault: imprecise external abort (0x1406) at 0x00000000 [ 47.601670] Unhandled fault: imprecise external abort (0x1406) at 0x00000000 [ 47.666068] Unhandled fault: imprec…

• 0

  Reputation Points

• 6 replies
• 4.8k views

Fredjoft

June 15, 20206 yr

I've tried nand-sata-install on Armbian_22.05.3_Odroidxu4_jammy_current_5.4.199.img and Armbian_22.05.3_Odroidxu4_focal_current_5.4.199.img. Right at the end of running nand-sata-install there's an error. If I try to install anything after nand-sata-install it will hang or the SSD will go into read only mode. To be safe I tested various SD cards and USB to SATA controllers. sed: can't read /boot/boot.cmd: No such file or directory sed: can't read /boot/boot.cmd: No such file or directory Error while creating U-Boot loader image with mkimage umount: /mnt/nand-sata-install.wwpusQ/bootfs: not mounted.

• 0

  Reputation Points

• 3 replies
• 3.5k views
• 1 follower

sgjava

June 28, 20224 yr

@gprovost I described last year a process to upgrade from omv4 to omv5. (which is doable). I also did a clean install of omv5 after i was having random reboot issues using the newer kernel5. I ended up using the clean built and reconfiguring all the services and dockers. I do not recommend using the newer kernel if you are using dockers. This is where I would have random system reboots. OMV4 was very stable but since omv4 was eol. I decided to upgrade or do a clean install. I did both with the same random reboots using the newer kernel 5. Once i switched back to the older kernel with my config, I was not having the random reboot issues. I understand this would be ha…

• 0

  Reputation Points

• 0 replies
• 2.9k views

PEW

May 13, 20215 yr

Is it possible to transfer the entire Armbian system from SD card to HDD? ... it is known that the SD card has a lower endurance than such a HDD dist (write, read etc.) I tried to transfer the system in such a way that I first upgraded the kernel to the newest one on the SD card and then moved the system files to a partition on the HDD: mount /dev/sda1 /mnt time tar --one-file-system -cpf - / | (cd /mnt && tar -xpf -) then knowing the sda1 partition information and ID lsblk -f then knowing the sda1 partition information and ID I changed the UUID / HDD number in two locations nano /boot/boot.ini and nano /etc/fstab after rebooting…

• 0

  Reputation Points

• 2 replies
• 3.8k views
• 1 follower

kris777

November 18, 20223 yr

I installed Armbian from Armbian_23.11.3_Rpi5b_jammy_current_6.1.68_cinnamon_desktop.img.xz downloaded today (February 11th 24) After installation, I performed an upgrade/update. I have not yet installed any additional software. Issues; 1) when cinnamon desktop starts there is message displayed: Your system is currently running without video hardware acceleration 2) vgencmd always gives an error: VCHI initialization failed, no matter if I run it with sudo or not, or with which parameter(s) I run it. armbian monitor -u gave link https://paste.armbian.com/lurunopoyo

• 0

  Reputation Points

• 5 replies
• 6.9k views
• 1 follower

Igor

February 12, 20242 yr

Helios4 can boot directly from the sata disk nr 1, without the need to switch from the SD or the eMMC. I personally tried setting SW1 to 11100 and using u-boot-sata for Clearfog, which shares the same uSOM and the system booted regularly, obviously the system didn't recognize many devices being u-boot for another board. I tried to compile a version of u-boot for sata trying to integrate the changes present in https://solidrun.atlassian.net/wiki/spaces/developer/pages/287212134/A38X+U-Boot in the U-boot build instruction and sources for Helios4 present in the Kobol Wiki but my skills are not sufficient for such a job. In the binaries available for…

• 0

  Reputation Points

• 19 replies
• 7.7k views
• 2 followers

laibsch

December 13, 2025Dec 13

... however Armbian_23.8.1_Helios4_bookworm_current_6.1.50.img.xz worked well and was then upgraded through apt to 24.2.1 / 6.6.16. I was then able to install OMV 7, Plex media server and Transmission on top. warning - the ethernet ports change, breaking scripts where they're hardcoded, e.g the wol service. changing the port in two places in the file and running systemctl daemon-reload ; systemctl restart helios4-wol seems to be running ok. This details the patch: diff --git a/lib/systemd/system/helios4-wol.service.orig b/lib/systemd/system/helios4-wol.service index 965eb74..451b857 100644 --- a/lib/systemd/system/helios4-wol.servic…

• 0

  Reputation Points

• 0 replies
• 2.2k views
• 1 follower

tamsoftware

May 7, 20242 yr

I've flashed: Armbian_25.2.0-trunk.193_Odroidxu4_trixie_current_6.6.65_minimal.img to my eMMC. It boots fine, but after a "armbian-upgrade" it will give a kernel panic upon reboot. I think the new kernel is borked.

• 0

  Reputation Points

• 5 replies
• 5.7k views
• 1 follower

MichaIng

January 9, 20251 yr

WiFi is missing in "Armbian_25.5.0-trunk.428_Rpi4b_trixie_current_6.12.22_minimal.img" Solved by following commands ``` sudo apt update sudo apt install firmware-brcm80211 --fix-broken sudo reboot ```

• 0

  Reputation Points

• 7 replies
• 4k views
• 1 follower

Igor

April 24, 20251 yr

Hello! I have an RPi5 8GB board that I bought off of AliExpress, along with a Waveshare PoE M.2 HAT+ ( https://www.waveshare.com/poe-m.2-hat-plus-b.htm ) Initially I tried to use the Noble XFCE image, by following the recommended installation procedure via rpi-imager via a USB drive, hoping to install the system to a Toshiba (Kioxia) NVMe drive. The RPI5 was connected to a CrowView Note. What I saw was that the firmware loaded up the necessary files from the USB drive (then later the micro-SD card), and the initramfs loaded up too, then systemd started up, and probably when the screen usually goes blank for a short time (probably switchin…

• 1

  Reputation Points

• 25 replies
• 6.5k views
• 1 follower

c0rnelius

November 11, 2025Nov 11

I've observed a significant difference in SSH login speed between DietPi and Armbian on Raspberry Pi 4B (headless setup). Environment Raspberry Pi 4B (headless) DietPi (recently installed) Armbian (previously used) Both systems use default settings Observations SSH login to DietPi is consistently faster than Armbian by a few seconds with default settings. Initially suspected MOTD settings, tested files under /etc/update-motd.d/. Discovered that 10-armian-header adds approximately 1 second to login time. Disabled this component but SSH login to Armbian still remained slow. Found related discussion on Ra…

• 0

  Reputation Points

• 3 replies
• 2.4k views

Werner

December 18, 2025Dec 18

As the title states I already have software raid setup on my NAS. I'm currently running OMV 4 and I'd like to do a fresh install of the latest Debian image and OMV 5. I do not want to lose my data and would like to simply re-mount my drives. Is this possible? Also if I mess up and I'm unable to mount the raid/volumes, could I create an image of my current micro sd card and simply reflash it back onto the card and have everything as it was?

• 1

  Reputation Points

• 4 replies
• 7.1k views
• 1 follower

helios4noob

May 12, 20215 yr

Hello, I have installed NextcloudPi on my Raspberry PI5. Current OS is installed currently: Now, I would like to make an upgrade and get the following issue. What can I do? I am very grateful for any help.

• 1

  Reputation Points

• 12 replies
• 5.3k views
• 1 follower

sunshine

October 18, 2025Oct 18

Newbie question I would like to clone a hdd to a new ssd without reinstalling the system. What are the ways to do it on my Odroid-HC1 running Armbian Stretch with boot partition on a SD card? Thanks

• 0

  Reputation Points

• 1 reply
• 3.1k views

suchende

December 11, 20196 yr

I have an array of HC2's running lizardfs. The other units are running 5.4.72-odroidxu4 kernels, but I dared to upgrade one to 5.8.16-odroidxu4 Only this one unit threw a Since the other units didn't I show anything in their logs, I have to assume it isn't because a process running away or a memory leak. line of fstab to mount the spinning rust drive: UUID=be95e207-1768-4fd9-bda9-ddc126a47d50 /chunks/be95e207-1768-4fd9-bda9-ddc126a47d50 xfs rw,noexec,nodev,noatime,nodiratime,largeio,inode64 0 2 Can't think of any additional info that would be useful. If someone has suggestions, i would be interested.

• 0

  Reputation Points

• 1 reply
• 3.2k views
• 1 follower

Werner

November 21, 20205 yr

Hello Everyone, My Helios4 stop of working. It was probably SD CARD because I format an other one with the last Armbian and after it boot again. Now I config ip address and can connect to it via ssh. Install webmin and saw that it didn't mount /dev/md0 I did it but filesystem in raid1 is btrfs. When I mounted it it say : unknown filesystem type 'LVM2_member' Someone can help me? Best regards.

• 0

  Reputation Points

• 2 replies
• 3.3k views

Stéfan Basch

July 15, 20215 yr

hello i am new user of armbian and i really like it. so i am experimenting with it a little. yesterday i successfully installed armbian on one of my old laptops in the lab (Armbian Bullseye with XFCE desktop with kernel 5.15.y released on feb 27, 2023), so currently it boots from internal hard drive. today i wanted to try another image, so i wanted to do the same thing: 1. boot from USB key 2. download the new image on USB key 3. run xzcat armbian.img.xz | dd of=/dev/sda status=progress 4. reboot laptop (to new system) but the step 1 failed - instead of booting the system from USB key (yes - i selected the USB key on lap…

• 0

  Reputation Points

• 3 replies
• 5k views

bletvaska

March 9, 20233 yr

Hi All, I wanted to add some dtoverlay lines to the pi's config.txt which was in /boot/firmware/config.txt and I notice the folder is empty ? WTF the pi is running ok - how can this be ?

• 0

  Reputation Points

• 2 replies
• 5.3k views
• 1 follower

pkfox

May 16, 20242 yr

mihanson@armbi400:~$ sudo poweroff Broadcast message from root@armbi400 on pts/0 (Thu 2025-09-04 07:29:16 PDT): The system will power off now! mihanson@armbi400:~$ [41893.451514] reboot: Power down [41893.454658] ------------[ cut here ]------------ [41893.459337] Voluntary context switch within RCU read-side critical section! [41893.459354] WARNING: CPU: 0 PID: 1 at kernel/rcu/tree_plugin.h:331 rcu_note_context_switch+0x4e0/0x530 [41893.475859] Modules linked in: sg rfcomm cmac aes_arm64 algif_hash algif_skcipher af_alg bnep zram zsmalloc binfmt_misc hci_uart btbcm bluetooth ecdh_generic ecc bcm2835_codec(C) bcm2835_v4l2(C) bcm2835_isp(C) bcm2835_mmal_vchiq(C) v4l2_m…

• 0

  Reputation Points

• 0 replies
• 2k views

mihanson

September 4, 20251 yr

Good Morning! I'm using ODROID-xu4 and did Download your image. I wonder if the image has support for XFS Filesystem? Because I would like to install a Webserber. Grateful! Luis Ferreira

• 0

  Reputation Points

• 3 replies
• 5.3k views

tkaiser

May 16, 201610 yr

Hi Everyone, I'm considering getting an ODROID-HC1 to use as a simple NAS. Is this a good idea? (Yes, some of you will have seen my very similar post about the Espressobin!) My requirements are quite basic; a single SATA SSD and a single ethernet port, running NFS and Samba. I do need a newish version of Samba (required to support "Time Machine" backup from my Mac) which I believe is in Debian Buster but not in Stretch. I've been a Debian user for decades; I guess I might be happier if the hardware supplier provided a Debian image, but it's great that Armbian is available. I note that Armbian Buster for this board is described as "Testing"; should I wait for a bit…

• 1

  Reputation Points

• 13 replies
• 13.3k views
• 5 followers

Igor

March 24, 20206 yr

Hello everyone! After my Helios4 had been laying in a cardboard box for a long time after moving houses, I decided it was time to once again set it up as an NAS. I was previously running Open Media Vault (OMV) with 4 disks in xfs and using MergerFS for unionizing three of them at a single mount point and then using Snapraid for the fourth disk. OMV worked pretty well for me but I go somewhat irritated from time to times because how it decides to thing in it's own way. But now I when I re-installed it (after getting a new PSU) I went with Armbian instead to keep it closer to "standard" linux. I think I will still go with Merver…

• 0

  Reputation Points

• 2 replies
• 2.7k views

helios4noob

April 15, 20233 yr

HC2 here. Two last 6.1 kernels broke alsa : hw not accessible anymore. Aplay -l lists audio outputs but none may be used. Looks like an omission on kernel flags.. Reverted to Armbian Bullseye : exact same config, but working.

• 0

  Reputation Points

• 0 replies
• 2.1k views

Mascaret

May 20, 20233 yr

After latest upgrade 21.05.01 apt says linux-buster-root-current-odroidxu4 is obsolete now and could be removed with autoremove. But even this version was installed with same upgrade, so i wonder why it should be removed now? Should i really remove that package? Thx

• 0

  Reputation Points

• 2 replies
• 3.8k views
• 1 follower

nihilista

May 15, 20215 yr

Hello all! I used the following armbian image to write to an SD (I'm using an old odroid HC1 btw): https://armbian.site-meganet.com/dl/odroidxu4/archive/ I used the bullseye_current image that was there. On the main download page it says that the file for Odroid XU4 is compatible with HC1, HC2 and MC1. https://www.armbian.com/odroid-xu4/ My odroid HC1 boots ok but any attempt to use the built-in ethernet port results in an instant lock-up. Only way I can "get into" the device is with a USB ethernet adapter although even just issuing a command, eg ifconfig enx001e06366b84 192.168.1.99 locks everything up - even the USB e…

• 0

  Reputation Points

• 0 replies
• 2.8k views

ljones0

June 12, 20224 yr

I con do a screenshot with scrot and a terminal, but a screenshot with the P400 and PrtScn-Key does not work. Can anybody help me please?

• 0

  Reputation Points

• 3 replies
• 4.1k views
• 1 follower

pi400user

October 21, 20223 yr

Hi, I want to make adc pcm1804(simple adc clock + i2s) work with odroid, and manage it by alsa. As I understand, I should add a codec for pcm1804, driver to work with alsa, and device tree overlay. Please, tell me where can I get an example of this, or at least smth to use as a reference ?

• 0

  Reputation Points

• 0 replies
• 2.2k views
• 1 follower

Григорий Селезнев

May 20, 20233 yr

Hi, the title says it all: this is the message I get when booting. I rebooted several times, to no avail: same message... The resizing did not seem to occur, as I don't have enough space to install a few packages. Looking at the armbianmonitor log, it seems that resize2fs is missing... Installing e2fsprogs then rebooting fixes the issue. It's on trixie Minimal / IOT image. Best regards. [Edit] typo: lof->log

• 0

  Reputation Points

• 5 replies
• 3.1k views

Igor

March 1, 20251 yr

Hi all, Thank to look at following link about my last 5.0.2 standard kernel on HC1 with some issues https://forum.odroid.com/viewtopic.php?f=93&amp;t=34237

• 0

  Reputation Points

• 0 replies
• 3.1k views

Jean-Marc

March 19, 20197 yr

Hi all, I wanted to do some cross arch builds on my newly installed Armbian on an Odroid-HC1 buuut, it seems binfmt_misc support is not enabled in the kernel. Can I enable it somehow without recompiling the kernel? Thank you for this great image, kernel 5.4, omg!

• 0

  Reputation Points

• 1 reply
• 3.1k views

Igor

May 11, 20206 yr

I'm having a problem with my Raspberry Pi 5, which I describe below. I have a DVR connected to it via Ethernet. If I connect both at the same time, dmesg reports a failure and I can't ping the DVR to establish a connection; I have to run `ifconfig eth0 down` and `ifconfig eth0 up`. Can anyone help or know if there's a bug in the kernel version? I'm using Ubuntu 22.04. jammy root:~# dmesg | grep eth0 [ 1.312167] macb 1f00100000.ethernet eth0: Cadence GEM rev 0x00070109 at 0x1f00100000 irq 108 (2c:cf:67:81:d6:2a) [ 3.237493] systemd[1]: Found device /sys/subsystem/net/devices/eth0. [ 3.453483] systemd[1]: Started ifup for eth0. …

• 0

  Reputation Points

• 0 replies
• 1.3k views
• 1 follower

Guilherme

March 6Mar 6

I see the download page says there are USB 3 issues with the mainline kernel (and eMMC, which the board doesn't even have?) and serial console for legacy kernel is broken. I've also read that HMP isn't supported on mainline either. Which kernel is recommended for general mini server usage with an attached hard drive and the OS installed on the hard drive with SD only for boot? I'm thinking of replacing my old cubietruck with it, running nginx as an SSL web proxy and a little bit of web serving.

• 1

  Reputation Points

• 4 replies
• 5.6k views

Igor

September 3, 20179 yr

Hello, I just ran a apt-update Sunday on a project and afterwards the XU only have Black screen with blinking _ in the corner, not connecting to LAN, no ssh, etc; red led is on, blue led blinking, no new logs in /var/log. Google' the issue, and several posts points to the /boot dir - however comparing with a know good SD card, I can't see much difference in this directory - other forum post points that a /dev mount point should be changed (but not to what) I can mount the broken SD card and have the following info; /etc/armbian.txt Title: Armbian 5.73 Odroidxu4 Ubuntu bionic next Kernel: Linux 4.14.94 Build date…

• 0

  Reputation Points

• 0 replies
• 2.5k views
• 1 follower

vingaard

May 21, 20197 yr

Raspberry OS has weird quirks that automate the process of setting up the system for using cameras, but I'm looking for clean way to set up the device tree to use the imx219 camera. Anyone knows what overlays to enable to get this to work on Armbian? Additionally where's the location of device tree overlays sources for Raspberry Pi 5 on Armbian?

• 0

  Reputation Points

• 5 replies
• 9k views
• 1 follower

c0rnelius

May 7, 20242 yr

Hi, I am using Nextcloudpi Image (Armbian) on an HC1. This setup is obviously not booting anymore after system upgrade. Packages that have been upgraded: - armbian-config - armbian-firmware - linux-buster-root-legacy-odroidxu4 - linux-dtb-legacy-odroidxu4 - linux-image-legacy-odroidxu4 - linux-u-boot-odroidxu4-legacy Insterting the µSD into an Laptop running PureOS (Debian fork) I can access log files. I could investigate so far, that there was a system upgrade (armbian-firmware_21.05.1) on 2021-05-11 6:00 am. After that a message that system will be rebooted on 2021-05-12 4:00 am. That actually happened. I can see this in several log…

• 0

  Reputation Points

• 6 replies
• 7.7k views

marsch

June 3, 20215 yr

Hi All, as all my other boards run armbian I thought it only right that my raspberry 4b should run it, has anyone here successfuly installed Armbian on one ? I don't want to use Bookworm as it has Audio problems - my main use of the pi is to host Logitech media server running squeezelite TIA

• 0

  Reputation Points

• 0 replies
• 2k views
• 1 follower

pkfox

April 1, 20242 yr

Spoiler [58531.860637] lowmem_reserve[]: 0 0 0 [58531.860654] Normal: 56*4kB (H) 44*8kB (H) 48*16kB (H) 37*32kB (H) 14*64kB (H) 1*128kB (H) 0*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB = 3552kB [58531.860733] HighMem: 27*4kB (UM) 42*8kB (C) 1*16kB (C) 0*32kB 0*64kB 0*128kB 0*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB = 460kB [58531.860786] 304403 total pagecache pages [58531.860790] 15267 pages in swap cache [58531.860794] Swap cache stats: add 382457, delete 367190, find 125239/202183 [58531.860798] Free swap = 1630472kB [58531.860801] Total swap = 2097148kB [58531.860805] 518656 pages RAM [58531.860809] 322048 pages HighMem/MovableOnly [58531.860813] 8201 pages re…

• 0

  Reputation Points

• 1 reply
• 3k views

grep

January 3, 20188 yr

Is it possible to install the x86 version in the RockPIX emmc? The nand-sata-install command doesn't solve it. Thank you

• 0

  Reputation Points

• 3 replies
• 5.3k views

Igor

March 9, 20233 yr

I'm having a hard time clarifying if OMV 5 is stable on Helios 4 and if there are any successful builds out there. Since there doesn't seem to be an upgrade path from OMV4 -> OMV5 and so requiring a full rebuild, I want to understand as much as possible before actually trying this new version out. Any successes out there?

• 1

  Reputation Points

• 9 replies
• 8.1k views
• 1 follower

Patrick Schlüter

July 5, 20206 yr

After switching from Debian Buster (installed via Petitboot) to Armbian, I have problems with NFS on Openmediavault that didn't exist the weeks before. My NFS streams abort after a few minutes, sometimes seconds (on Libreelec as well as Kodi for Windows). In OMV it shows me that the service is enabled and running, but systemctl says: nfs-server.service loaded active exited. With exportfs -rav it runs again, only to stop after a few minutes. It also works without command if I wait a few minutes. I also did a fresh install of Armbian, wich did nothing.

• 0

  Reputation Points

• 2 replies
• 3.5k views
• 1 follower

Igor

March 2, 20215 yr

Hi, I'm running OMV on Odroid HC2. I updated to OMV 7.7.1. Armbian to 24.5.1 with Linux kernel 6.6.31-current-odroid-xu4. After reboot the server started to act very slow. I tried to reapply the DBT for HC1/2 via armbian-config but this did not help. armbian-config says I'm on ondemand governor between 200-200 MHz. What could be the issue? Actually my system says I should run dpkg --configure -a but this command hang here and the system reboots after few seconds... steakhutzeee@dk:~$ sudo dpkg --configure -a [sudo] password for steakhutzeee: Setting up containerd.io (1.6.33-1) ... …

• 0

  Reputation Points

• 10 replies
• 7.6k views
• 1 follower

hmof

June 18, 20242 yr

Hello everyone, I'm wondering if is possible to include in future releases of the Armbian Kernels these options: CONFIG_NETLABEL CONFIG_MPTCP CONFIG_NET_VRF CONFIG_OF_UNITTEST CONFIG_OF_DYNAMIC CONFIG_OF_OVERLAY CONFIG_INET_MPTCP_DIAG CONFIG_MPLS_ROUTING CONFIG_MPLS_IPTUNNEL CONFIG_NLMON CONFIG_NET_VRF CONFIG_GTP CONFIG_GENEVE CONFIG_IPVTAP CONFIG_IFB I'm playing around with my Odroid XU4 and I notice that I'm missing such options and drivers compiled in the Kernel. As an example Debian has these options enabled by default. In my case I created a script that is gett…

• 0

  Reputation Points

• 1 reply
• 3k views

Werner

July 1, 20224 yr

Hi I have upgraded an existing x86 Armbian system with kernel 6.6.63 and zfs 2.3.2 to the suggested kernel 6.12.32-current-x86, but I cannot get the zfs kernel module loaded after the latest updates to Armbian 25.5.1 noble. I also tried on other kernels, only the old 6.6.63 seems to work. Normally when you select a different kernel in the armbian-config menu, it should automatically compile the zfs modules if it is activated. It just skips it. But you can of course compile it with the provided DKMS system: the build just finishes fine, without any error, also the install, but when you try to load the module: it responds with: …

• 0

  Reputation Points

• 4 replies
• 5.4k views

rpardini

December 4, 2025Dec 4

Hi, I received 2 same boards recently. One is working great, second has suffered from unexpected shutdowns. Rpimonitor has not recorded this high temperatures yet, maximum temperature recorded is not more than 90C. SoC has been utilized on 100% with ffmpeg video conversion and other tasks. I run these board on Jessie or Bionic system and have tested mainline stable and beta kernel. These board have got passive heatsink however I put 80x80 quiet slower fan on the top of heatsink, thermal compound is replaced for silver one without making problem solved. Spoiler cat /var/log/syslog | grep critical May 27 23:32:30 localhost kernel: [ 10.1…

• 0

  Reputation Points

• 20 replies
• 12.3k views
• 2 followers

technik007_cz

December 5, 20187 yr

To all folks, We are taking order for the 2nd batch of Helios4. If you are interested visit our shop. We offer the two following kits for order : Helios4 2GB ECC Full Kit Helios4 2GB ECC Basic Kit Thanks for the support ;-) The Kobol Team

• 1

  Reputation Points

• 1 reply
• 3.3k views

Igor

July 4, 20188 yr

Hi there, not sure where to post this, intended for @rpardini I have an x13s running here with dual boot to win11 and ubuntu 23.04 lunar, the armbian work was a great help to get it to work. Not quite finished setting it up tbqh. However, if you're on a fast boot device like the local NVMe drive, the remoteproc firmwares qcadsp8280.mbn and qccdsp8280.mbn fail to load and won't get retried later, the GPU firmwares a660_sqe.fw and a660_gmu.bin may fail but get loaded later. That is a little unfortunate, since PMIC GLINK (among other things) is running on one of these. My Windows Dev Kit 2023 (same SoC) doesn't balk this way, both boot the same Ubuntu…

• 1

  Reputation Points

• 7 replies
• 5.9k views
• 1 follower

jglathe

October 27, 20232 yr

Hi All, I might need your help with one issue I've encountered. I'm running debian with the 4.9.20 kernel on an Odroid XU4 board. I've compiled the kernel with the options for AppArmor enabled. The installed AppArmor version is the 2.10.95 (auditd is also installed in version 1:2.4-1+b1). ## Kernel Options ## CONFIG_SECURITY=y CONFIG_SECURITYFS=y CONFIG_SECURITY_APPARMOR=y CONFIG_SECURITY_APPARMOR_BOOTPARAM_VALUE=1 CONFIG_DEFAULT_SECURITY_APPARMOR=y CONFIG_DEFAULT_SECURITY="apparmor" CONFIG_SECCOMP=y CONFIG_SECCOMP_FILTER=y CONFIG_AUDIT=y ## ## AppArmor itself is working without any issues. If I set…

• 0

  Reputation Points

• 1 reply
• 3.4k views

asterisk-user

April 18, 20179 yr

Hello, few days ago I did apt upgrade of my armbian system on Odroid HC2 and there was a reboot req cause of new kernel, so I did reboot it. It wont boot with this error (sorry for missing letters, my LCD is not able to reposition the screen output, attached usb kbd is not working, dont know why, so I just took a pict by my phone): h to partitions #0, OK is current device ing mmc 0:1... /boot/extlinux/extlinux.conf eving file: /boot/extlinux/extlinux.conf ytes read in 2 ms (149.4 KiB/s) Armbian eving file: /boot/uInitrd 776 bytes read in 782 ms (20.2 MiB/s) eving file: /boot/Image d to load '/boot/Image' ing Armbian for failure retrieving kernel T FAILED: con…

• 0

  Reputation Points

• 3 replies
• 4.2k views
• 1 follower

VictorC

September 9, 20215 yr

Hi all! :-) To those who made the excellent work for my oroid! Well done, very well done! Well, just one point, maybe: Sep 08 13:47:55 odroidxu4 systemd[1]: Starting Atop process accounting daemon... Sep 08 13:47:55 odroidxu4 atopacctd[17567]: /run/pacct_shadow.d: File exists Sep 08 13:47:55 odroidxu4 systemd[1]: atopacct.service: PID file /run/atopacctd.pid not…ctory Sep 08 13:47:55 odroidxu4 systemd[1]: Failed to start Atop process accounting daemon. Sep 08 13:47:55 odroidxu4 systemd[1]: atopacct.service: Unit entered failed state. Sep 08 13:47:55 odroidxu4 systemd[1]: atopacct.service: Failed with result 'resources'. Hint: Some lines wer…

• 0

  Reputation Points

• 7 replies
• 4.7k views
• 1 follower

tkaiser

September 10, 20188 yr

i installed the xu4 server (legacy) for debian jessie and get no output on the hdmi/dvi connected display. what is meant by "Serial console enabled" in the description? thank you for producing armbian for odroid xu4! i like the board - it is fast! andrew

• 1

  Reputation Points

• 4 replies
• 4k views

andrewufrank

September 13, 201610 yr

Does anyone know any way to fix the annoying way the fan works on this device? Even on idle load, the fan spins up every couple of minutes, keeps spinning for a few seconds, then turns off again, only to repeat a few minutes later. I can't even sleep in the same room the device is in... I've tried using this: https://github.com/f1vefour/odroid-xu4-fan-control And it hasn't really solved anything, as the fan cannot start on PWM values lower than 100... it instead makes squeaking noises. So having adjusted the script, nothing has really changed. Is there something I could do to fix this in software? Perhaps something that doesn't involve getting the heatsink …

• 1

  Reputation Points

• 10 replies
• 8.1k views

NicoD

August 26, 20188 yr

I've seen a growing memory utilization on my Odroid HC1. It turned out that `irqbalance` is a root cause. It looks like it is a known bug Right now ` irqbalance ` get restarted once per a day to keep it small. $ grep 'resource limit' /var/log/monit.log [MSK Sep 30 21:00:56] error : 'irqbalance' mem amount of 400.0 MB matches resource limit [mem amount>400.0 MB] [MSK Oct 2 01:53:31] error : 'irqbalance' mem amount of 400.1 MB matches resource limit [mem amount>400.0 MB] [MSK Oct 3 06:46:01] error : 'irqbalance' mem amount of 400.2 MB matches resource limit [mem amount>400.0 MB] [MSK Oct 4 11:38:34] error : 'irqbalance' mem amount of …

• 0

  Reputation Points

• 0 replies
• 2.5k views

Igor_K

October 6, 20188 yr

Hi all I'm currently using armbian on a Odroid-XU4 and to use a peripheral I need to patch the kernel. So to start that process i run: apt-get source linux-image-$(uname -r) which failed: Unable to find a source package for linux-image-3.10.102-odroidxu4 I tried adding adding the sources by adding deb-src http://apt.armbian.com jessie main to the armbian.list but this is aparently not a thing. Do any of you have any idea where i can find a souce repository. Thanks in advance. edit: on a sidenote is 3.10.102 really the newest kernel available for this board using armbian?

• 1

  Reputation Points

• 20 replies
• 10.5k views
• 1 follower

wildcat_paris

September 19, 201610 yr

Hello, I am the main developer of NextCloudPlus. NCP is a community project to make it easier to run and setup a Nextcloud instance in ARM boards, by providing configuration tools and setup wizards for typical management tasks such as backups, SSL certificates and more. We have just released the first stable version of Armbian based images with NCP for Odroid XU4 / HC1 / HC2. Check it out at the downloads section. More boards will come soon Feedback, testing and development help are very welcome Cheers,

• 0

  Reputation Points

• 3 replies
• 6.6k views
• 1 follower

zador.blood.stained

June 10, 20188 yr

All credit goes to @jshc1, I only found this info in this post and split it off here so it could more easily be found later. I am not sure if this applies only to ODROID-XU4 or other Odroids as well.

• 1

  Reputation Points

• 7 replies
• 16.6k views
• 4 followers

jshc1

February 13, 20206 yr

The bios boot menu will not boot at all from that USB stick, unlike from ironrobin aarch64 or ubuntu concept x13s, which do boot (and install).

• 0

  Reputation Points

• 0 replies
• 1.9k views

tja

August 12, 20233 yr

Hi Armbian_25.5.1_Rpi4b_bookworm_current_6.12.28 broken after last upgrade. I run apt upgrade which installed kernel 6.18.10. It breaks ZFS. Provided ZFS version, 2.3.2, supports kernels up to 6.14. Don't forget a snapshot before "apt upgrade" 🙂 Regards, Chris

• 0

  Reputation Points

• 0 replies
• 2.1k views

ChrisO

March 18Mar 18

I'm curious how the CPU temp value is calculated on the MOTD screen when ssh'ing in. Mine is showing 56°C, but if I run the commands: # cat /sys/devices/virtual/thermal/thermal_zone*/temp 45000 44000 48000 44000 41000 # armbianmonitor -m Stop monitoring using [ctrl]-[c] Time big.LITTLE load %cpu %sys %usr %nice %io %irq CPU C.St. 12:16:28: 600/ 600MHz 0.17 1% 0% 0% 0% 0% 0% 45.0°C 0/3 Thanks

• 0

  Reputation Points

• 5 replies
• 5.2k views

rooted

November 28, 20187 yr

Hello, when I try to update the kernel via armbian-config (System -> Other ), I always get the message "Test installed failed. Can't change firmware". I use the Image "Armbian_22.08.5_Uefi-x86_bullseye_current_5.15.73" The /tmp/switch_kernel.log says the following linux-image-current-x86=22.08.6 linux-dtb-current-x86=22.08.6

• 0

  Reputation Points

• 5 replies
• 4.4k views

Igor

December 1, 20223 yr

Please note that it is a known issue that Turnip / Vulkan broken on Snapdragon SM8550 / Adreno 740 on Mesa 25.3.x. See https://gitlab.freedesktop.org/mesa/mesa/-/work_items/14656 The workaround is to apply patch from https://github.com/batocera-linux/batocera.linux/blob/master/board/batocera/patches/mesa3d/001-fix-freedreno-vulkan.patch and rebuild 001-fix-freedreno-vulkan.patch

• 0

  Reputation Points

• 1 reply
• 1.6k views

Alex Ling

Wednesday at 04:02 AM5 days

Hi all, My Hard Drive in my HC2 is not found or not readable. Before I was on Armbian Buster with Kernel 4.14 and everything was working fine. I switched and am now running Armbian Focal 21.05.2 with Kernel 5.4.116 . HDD is btrfs formatted. /proc/filesystems lists btrfs so this is not the problem. /dev/sda exists, but sda will not be listed when I lsblk. Dmesg shows a Read Capacity(16) failed. Not posting the whole dmesg log b/c armbianmonitor is attached. Grateful for any help or hints =)

• 0

  Reputation Points

• 2 replies
• 3.8k views
• 1 follower

MowTee

June 17, 20215 yr

Hi, hope you're all doing well. I have this Odroid HC2 (XU4 without video output) that was running an old Armbian version. I intended to update to the latest one (o something close to it) but it seems it won't boot with the newer releases. The board seems to power up ok, leds apparently blinking in a normal fashion, but it seems it gets stuck somewhere. It doesn't acquire any IP address. Not having video output leaves me with little to no way of knowing what is failing. No logs seem to be created in the sdcard. I also tried DietPi images, which I believe are based on Armbian but the same thing happens. I does, howe…

• 0

  Reputation Points

• 4 replies
• 3.5k views
• 1 follower

MikeSmith

March 23, 20251 yr

When flashing the Armbian image for the Odin 2 Portal to the SD card and attempting to boot (on ROCKNIX ABL v1.2), the ABL can detect the SD card but does not detect the OS at all. This is on the latest version of the OS, with the GNOME/ubuntu image flashed via the official Armbian Imager. When will this be fixed? (image not uploaded as it kept throwing errors)

• 0

  Reputation Points

• 1 reply
• 148 views

devnull982

Thursday at 04:27 PM4 days

I have a raspberry pi running "Armbian 25.11.0-trunk.38 trixie" - I want to use this as a gateway, including running wireguard. When I install 'wireguard' and 'wireguard-tools' I receive this error: ``` Summary: Upgrading: 0, Installing: 0, Removing: 0, Not Upgrading: 2 2 not fully installed or removed. …

• 0

  Reputation Points

• 7 replies
• 5.4k views

Werner

November 3, 2025Nov 3

Hi armbian staff and users, i must/try to connect through uart (HC1 /Dev/ttySAC2) to an external uart device. 1. As uart /dev/ttySAC2 is used by boot/kernel, /sbin/agetty has been renamed to stop its launching / lock rather than rebuild uboot/... 2. So as powers supply of 2 uart are differents, 2 converters UART/USB are installed on 2 sides HC1 <-> UART/USB(CP2102N) <=======> USB/UART(XR21V14xy) <-> device. External PS 5v is connected on USB(vcc:gnd), red light on CP2102N is up. I precise 2 points : HC1 <-> UART/USB(CP2102N) <=======> laptop=OK DEVICE <-> UART/USB(XR21V14xy) <=======> laptop=OK Nothing TX/RX, where i…

• 0

  Reputation Points

• 4 replies
• 5.1k views

r2d2r01

September 3, 20206 yr

Hi, I installed Armbian_5.00_Odroidxu4_Debian_jessie_3.10.96_desktop.raw on my ODroid, plugged a 2TB external drive into the USB 3 port, and ran nand-sata-install. I chose /dev/sda1 as the root. After completing, and rebooting, it appears it installed an operating system on /dev/sda1, but I'm still using the SD card as the root: root@odroidxu4:~# mount /dev/mmcblk0p2 on / type ext4 (rw,noatime,nodiratime,errors=remount-ro,commit=600) .... I tried changing boot.ini to point to /dev/sda1: setenv bootrootfs "console=tty1 loglevel=1 root=/dev/sda1 rootwait ro fsck.repair=yes" but it would not boot with this setting. Is there any more information I can p…

• 1

  Reputation Points

• 4 replies
• 4.7k views

Igor

February 28, 201610 yr

Hi, I've got since several days an issue with armbian-truncate-logs. I received mail alerts from cron as this one, error: error running shared postrotate script for '/var/log.hdd/mysql/mysql.log /var/log.hdd/mysql/mysql-slow.log +/var/log.hdd/mysql/mariadb-slow.log /var/log.hdd/mysql/error.log ' error: error running shared postrotate script for '/var/log.hdd/nginx/*.log ' How to debug that? Laurent

• 0

  Reputation Points

• 3 replies
• 4.3k views

Guest

January 1, 20215 yr

Fresh-builded armbian image, Helios4. Try to enter armbian-config → system → cpu root@helios4:~# cat /etc/os-release NAME="Ubuntu" VERSION="21.04 (Hirsute Hippo)" ID=ubuntu ID_LIKE=debian PRETTY_NAME="Armbian 21.08.0-trunk Hirsute" VERSION_ID="21.04" HOME_URL="https://www.ubuntu.com/" SUPPORT_URL="https://help.ubuntu.com/" BUG_REPORT_URL="https://bugs.launchpad.net/ubuntu/" PRIVACY_POLICY_URL="https://www.ubuntu.com/legal/terms-and-policies/privacy-policy" VERSION_CODENAME=hirsute UBUNTU_CODENAME=hirsute

• 0

  Reputation Points

• 0 replies
• 2.8k views
• 1 follower

iav

June 15, 20215 yr

I wanted to try Armbian on a Raspberry Pi-5 with a Radxa penta SATA hat. Installed: Armbian_community_25.2.0-trunk.86_Rpi5b_bookworm_current_6.6.63_minimal.img The SATA hat is not detected: root@rpi5b:~# lspci 00:00.0 PCI bridge: Broadcom Inc. and subsidiaries BCM2712 PCIe Bridge (rev 21) 01:00.0 Ethernet controller: Raspberry Pi Ltd RP1 PCIe 2.0 South Bridge I would expect this: root@raspi:~# lspci 0000:00:00.0 PCI bridge: Broadcom Inc. and subsidiaries BCM2712 PCIe Bridge (rev 21) 0000:01:00.0 SATA controller: JMicron Technology Corp. JMB58x AHCI SATA controller 0001:00:00.0 PCI bridge: Broadcom Inc. and subsidiaries BCM2712 PCIe Bridge (r…

• 0

  Reputation Points

• 0 replies
• 3.6k views

ChrisO

November 26, 20241 yr

I have my ODROID XU4 configured so that the SD /boot files boot the machine on a SSD formatted to ext4. This works fine with 4.9.30, but fails with the 4.9.33 kernel I installed today. The only useful message I see is that it can't find my SSD's uuid. The uuid is correct so I suspect that the kernel does not have or is not loading a USB driver. Does anyone have a suggestion on how to boot using the 4.9.33 kernel? Thanks, Michael

• 0

  Reputation Points

• 3 replies
• 4.8k views
• 1 follower

tkaiser

June 26, 20179 yr

Can anyone help me convert an Orange Pi image to run on my new Odroid XU4 as I need it running on the older kernal ARMBIAN 5.31 stable Ubuntu 16.04.3 LTS 3.4.113-sun8i The newer Kernal has a few small issues that cause a problem for my setup.

• 0

  Reputation Points

• 0 replies
• 2.5k views
• 1 follower

IsortedIT

December 30, 20187 yr

Hello, Version 5.4.0-odroidxu4 #19.11.3.342 If I use this command: sudo swapoff -a sudo swapon -a Swap switch off, but not on again. Only after reboot, swap is on again. regards ThomasD

• 1

  Reputation Points

• 4 replies
• 4k views
• 1 follower

Igor

December 24, 20196 yr

I used the Armbian 24.11.1 Bookworm Minimal / IOT Image from https://www.armbian.com/odroid-xu4/. When i checked the boot messages with journalctl -b, then i can see the message -> "system vulnerable" Later i can read the message "Spectre BHB: enabling loop workaround for all CPUs". Is this a fix for the first warning message, or is my system vulnerable? Dec 16 20:32:58 odroidxu4 kernel: smp: Bringing up secondary CPUs ... Dec 16 20:32:58 odroidxu4 kernel: CPU1: thread -1, cpu 1, socket 1, mpidr 80000101 Dec 16 20:32:58 odroidxu4 kernel: CPU2: thread -1, cpu 2, socket 1, mpidr 80000102 Dec 16 20:32:58 odroidxu4 kernel: CPU3: thread -1, cpu 3, …

• 0

  Reputation Points

• 3 replies
• 3k views
• 2 followers

Werner

December 18, 20241 yr

Hello, I have updated my Odroid HC1 to 26.2.1 - just the kernel, u-boot and such. I have been running a self-built 6.6.128 prior so kernel version itself is unlikely the issue. After rebooting, my SATA drive seems dead - no partitions are detected, only the main sda device. This is what the journal said before: Mar 05 15:51:31 kernel: usb 4-1: new SuperSpeed USB device number 2 using xhci-hcd Mar 05 15:51:31 kernel: usb 4-1: New USB device found, idVendor=152d, idProduct=0578, bcdDevice=31.02 Mar 05 15:51:31 kernel: usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Mar 05 15:51:31 kernel: usb 4-1: Product: USB to ATA/ATAPI Bridge Mar 05 15:5…

• 0

  Reputation Points

• 8 replies
• 3.1k views
• 1 follower

belegdol

April 21Apr 21

I'm trying to get a full serial console on my XU4. I currently only get the U-boot output. The last message says "Loading Kernel". I never get any kernel related messages. I understand I will need to start up a getty to actually log in via this console port, but I haven't even gotten that far. In my (unchanged) boot.ini I have console=ttySAC2, 115200n8. And when the system boots up, I cannot manually write anything to that port (as i believe the kernel has it opened) Any Ideas? Thanks! Caleb

• 0

  Reputation Points

• 4 replies
• 6.2k views

justsomeguy1983

February 15, 20179 yr

https://dl.armbian.com/odroidxu4/archive/Armbian_20.05.2_Odroidxu4_bullseye_current_5.4.41.img.xz Third link on XU4 and HC1,2 MC1 download pages are 404 not found. Building an archive for a workshop I'm doing next week and got the 404. No big deal, just wanted to make a note.

• 0

  Reputation Points

• 0 replies
• 2.6k views
• 1 follower

Technicavolous

July 4, 20206 yr

Hello everyone, I would like to build an image for the Rasperry Pi 1, 2 and Zero. I could not found a download for a RPi on armbian.com. Then I saw that `rpi` is disabled in `/lib/configuration.sh`. Even when enabling it, I get an error during build, saying "[ error ] Building failed, check configuration" . I wonder why the Raspberry Pi is not supported. Is it due to its closed hardware? Thanks!

• 1

  Reputation Points

• 140 replies
• 194.5k views
• 6 followers

perlian

March 4, 20224 yr