Allwinner sunxi

I am using an armbian build image on PINE A64+ board with the kernel 3.10.107. During build i enabled below I2S driver as built-in. CONFIG_SND_SOC_SUNXI_RW=y CONFIG_SND_SOC_SUNXI_AUDIO_DMA=y CONFIG_SND_SOC_SUNXI_TDM=y CONFIG_SND_SUNXI_SOC=y CONFIG_SND_SOC_INTERNAL_AUDIOCODEC=y CONFIG_SND_SOC_INTERNAL_I2S=y CONFIG_SND_SOC_AUDIO_CODEC_MACHINE=y CONFIG_SND_SOC_DAUDIO_PLATFORM=y CONFIG_SND_SOC_VIRCODEC=y CONFIG_SND_SOC_DAUDIO0_MACHINE=y # CONFIG_SND_SOC_DAUDIO1_MACHINE is not set CONFIG_SND_SUNXI_SOC_HDMIAUDIO=y The Internal Audio and HDMI Audio are initialized successfully but failed to snddaudio0 which can be accessed from Euler bus…

• 0

  Reputation Points

• 3 replies
• 4.4k views
• 2 followers

gkkpch

December 17, 20187 yr

I'm searching for an IDE like VSCode or Atom for my Pine64 with 2GB. I've found a way to install VSCode named Code OSS headmelted, but after 15 minutes the memory gone to be overflow, with the risk to collapse the os. Excluding Geany, is there some IDE that works and can be used for NodeJS/ES6 ?

• 1

  Reputation Points

• 14 replies
• 8.2k views
• 2 followers

sfx2000

April 19, 20206 yr

Just tried the latest image for Orangepi Zero2, the Armbian Focal Image(Armbian_22.02.2_Orangepizero2_focal_edge_5.16.11.img Built March 7 2022) The board has startup issue, the serial output seems to load some files in wrong format: U-Boot SPL 2021.10-armbian (Feb 26 2022 - 17:45:38 +0000) DRAM: 1024 MiB Trying to boot from MMC1 NOTICE: BL31: v2.6(debug):510155aa-dirty NOTICE: BL31: Built : 17:45:34, Feb 26 2022 NOTICE: BL31: Detected Allwinner H616 SoC (1823) NOTICE: BL31: Found U-Boot DTB at 0x4a082570, model: OrangePi Zero2 INFO: ARM GICv2 driver initialized INFO: Configuring SPC Controller INFO: PMIC: Probing AXP305 on …

• 1

  Reputation Points

• 4 replies
• 6.8k views

Gunjan Gupta

December 29, 20232 yr

Hi, i'm new with linux and SBC. My final goal is to use the board as a voice command recognition system (without display) and to be honest i do not know how to start. I downloaded Armbian desktop on microSD using balenaEtcher and I inserted it in the board e powered it! i do not have a display unfortunatly and i do not know if desktop version is the best choice or i have to install an embedded version if exists. Could help please? thanks

• 1

  Reputation Points

• 1 reply
• 3.9k views
• 1 follower

Werner

October 4, 20224 yr

When I tried using a c++ library called sfml which tried opening a window and it gave me an error and after trying every solution on the internet I gave up. And after trying other Debian images I noticed all of them don't have a desktop environment pre installed. So does Debian have graphics at all?

• 0

  Reputation Points

• 2 replies
• 3.2k views
• 1 follower

oleksii_laa

July 23, 20251 yr

Just for curiosity, I've updated my Armbian on my Pine64 to the latest release. The latest u-boot for Pine64 (U-Boot SPL 2017.11-armbian (Jan 25 2018 - 08:32:21) seems to have an issue with the persistent u-boot environment. Once I've written a custom environment back to MMC using `saveenv´ the board hangs during boot. Environment size: 10335/131068 bytes => saveenv Saving Environment to MMC... Writing to MMC(0)... done => reset resetting ... INFO: PSCI Affinity Map: INFO: AffInst: Level 0, MPID 0x0, State ON INFO: AffInst: Level 0, MPID 0x1, State OFF INFO: AffInst: Level 0, MPID 0x2, State OFF INFO: AffInst: Level 0, MPID 0x3, State OFF …

• 0

  Reputation Points

• 2 replies
• 2k views

umiddelb

February 2, 20188 yr

Hello, I am new to Armbian and Linux in general. I am using an OrangePi Zero 2 (H616) board and need to enable the hardware UART. To do this, I tried using the simplest method I could find: running the command armbian-config -> System -> Hardware. However, in the section where I should find options for peripherals to enable, I found nothing. I have tried installing different versions of Armbian, but nothing changed: - Armbian_24.5.1_Orangepizero2_jammy_current_6.6.31.img - Armbian_24.2.1_Orangepizero2_bookworm_current_6.6.16.img - Armbian_23.8.3_Orangepizero2_bookworm_current_6.1.53.img - Armbian_24.5.1_Orangepizero2_noble_current_6.6.31.i…

• 1

  Reputation Points

• 3 replies
• 5.9k views
• 1 follower

ALIGMSTEN

June 10, 20242 yr

I am using this version "Armbian_community_25.11.0-trunk.334_Kickpik2b_trixie_current_6.12.47_minimal.img". It shows U-Boot SPL 2025.07 (Oct 20 2025 - 18:19:29 +0800) DRAM:This DRAM setup is currently not supported. resetting ... U-Boot SPL 2025.07 (Oct 20 2025 - 18:19:29 +0800) DRAM:This DRAM setup is currently not supported. resetting ... U-Boot SPL 2025.07 (Oct 20 2025 - 18:19:29 +0800) DRAM:This DRAM setup is currently not supported. resetting ... U-Boot SPL 2025.07 (Oct 20 2025 - 18:19:29 +0800) DRAM:This DRAM setup is currently not supported. resetting ... U-Boot SPL 2025.07 (Oct 20 2025 - 18:19:29 +0800) DRAM:This DRAM setup is currently not support…

• 1

  Reputation Points

• 48 replies
• 15.6k views
• 3 followers

c0rnelius

September 20Sep 20

Hello, The latest build Armbian_24.5.1_Bigtreetech-cb1_bookworm_current_6.6.31_minimal.img.xz does not seem to boot on BTT Pi v1.2 (blank screen, no signs of anything happening, no ethernet) I checked archival version Armbian_24.2.3_Bigtreetech-cb1_bookworm_legacy_6.1.79_minimal.img.xz and it works just fine. Any ideas?

• 0

  Reputation Points

• 10 replies
• 8.1k views
• 1 follower

Ash Doi

December 28, 20241 yr

Hello, I downloaded the latest 20.04 image for Pine64+ and I am not getting any audio from youtube for example. I can see in the Volume Control window in the Output panel an audio level meter moving and the application Chromium. But still get no audio from the TV.

• 0

  Reputation Points

• 1 reply
• 2.4k views

Pander

April 22, 20233 yr

Old ugly EOL-kernel legacy image received fixes for booting. Feel free to test. https://imola.armbian.com/dl/orangepizero2/archive/

• 0

  Reputation Points

• 5 replies
• 5.8k views
• 2 followers

Werner

June 1, 20233 yr

Hello! I have three Libre Computer Tritium H5 boards and three eMMC modules on hands. All three eMMC modules is flashed with exactly same Armbian image and exactly same uboot. I also use exactly same PSU and cable for all three boards (however I reproduced this issue with four PSU and three microUSB cables, no difference in behavior was found). All three boards start just fine from microSD (so it's not exactly "Your board doesn't work?" case). One board never boot from eMMC on first power up, but almost always boot on second power up. That reproducible with all three eMMC modules. Two other boards just never boot from any eMMC module…

• 0

  Reputation Points

• 10 replies
• 7.1k views
• 1 follower

Da Xue

July 21, 20224 yr

[WIP] https://libre.computer/products/boards/all-h3-cc/ Schematics Pros: - yet another H3 Cons: - micro USB powering

• 1

  Reputation Points

• 44 replies
• 25.6k views
• 2 followers

lanefu

May 26, 20188 yr

The Linux kernel contained in the latest "linux-image-legacy-sunxi" (version 24.5.1) package appears to broken to the point of locking-up right from the start. It prints "Starting kernel ...", and no more messages appear even with "verbosity=7" set in the "armbianEnv.txt". The "linux-image-legacy-sunxi" version 24.2.1 boots just fine. Here are the steps to reproduce the problem. I've done this on "Orange Pi One" board, but exactly the same issue occurs on (community maintained) Banana Pi M1. 1. Download and write the Armbian image to a MicroSD card. 2. Connect the serial console, boot the board, finish setup, do all the upgrades: everything works fin…

• 1

  Reputation Points

• 26 replies
• 13.1k views
• 2 followers

mikhailai

July 30, 20242 yr

Hi. I have been running mainline on a Pine64 with mipi-dsi lcd Feiyang display since Focal release. I default application ran directly on framebuffer without X, with startup log rolling until the application loaded, but after recent update including kernel 6.6.44 the display is completely black, all the way from boot. I can see that the screen is being identified at boot, but not sure what else to check. Here are relevant lines from dmesg and modules: $ dmesg | grep mipi [ 10.113223] sun6i-mipi-dsi 1ca0000.dsi: Attached device fy07024di26a30d $ lsmod | grep fy0702* panel_feiyang_fy07024di26a30d 12288 0 Please can …

• 0

  Reputation Points

• 10 replies
• 5.5k views

laibsch

December 10, 2025Dec 10

On the latest image (25.2.2) of both Server - Noble and Desktop - XFCE - Bookworm, the wireless interfaces show up as expected and connect to wifi. After the first apt upgrade and reboot, the system no longer detects the wireless interface at all. For my armbianmonitor output, there is a mediatek wireless interface plugged into USB, but there is no mention of the rtl8189 in any of the boot or hardware logs. Did something change in the overlay or other pre-kernel bootloader configs which disable the device? I would think if it were merely kernel / driver related, the hardware would still show up, but be unusable until a driver was configured.

• 0

  Reputation Points

• 3 replies
• 4.5k views
• 3 followers

Paul Damian

May 14, 20251 yr

Are there any plans of creating an image incorporating an mainline 4.xxx kernel for the pine64 boards? Kernel.org states the projected EOL for the 3.10 kernel line as october 2017.

• 0

  Reputation Points

• 1 reply
• 2.6k views

Igor

April 19, 20179 yr

Hi, I need to set max_loop=128 to boot kernel parameter, I added to the armbianEnv.txt file but value seems zero when I look like that. cat /sys/module/loop/parameters/max_loop How can I modify that parameter? Thanks.

• 0

  Reputation Points

• 0 replies
• 2.1k views

cemzafer

May 7, 20188 yr

I am trying to port my app running on legacy OS to Mainline OS and found some problems: I was able to replicate problem with following actions: 1) git cloned fresh copy of source to new directory - OK 2) edited config-default.conf: KERNEL_ONLY="no" KERNEL_CONFIGURE="no" CLEAN_LEVEL="make,debs,oldcache,images" DEST_LANG="en_US.UTF-8" BOARD="pine64so" BRANCH="next" RELEASE="xenial" BUILD_DESKTOP="yes" KERNEL_KEEP_CONFIG="no" # do not overwrite kernel config before compilation EXTERNAL="no" # build and install extra applications and drivers EXTERNAL_NEW="prebuilt" …

• 0

  Reputation Points

• 4 replies
• 5.3k views

mikebargauan

March 1, 20188 yr

For PINE A64 with Ubuntu Focal (stable and nightly) with a 5 MP camera, the documentation states to add camera_type=s5k4ec to /boot/armbianEnv.txt and reboot. After rebooting, the kernel module is not available. modinfo s5k4ec returns: modinfo: ERROR: Module s5k4ec not found. The file /boot/config-5.9.8-sunxi64 shows that only camera sensors OV2640 and MT9V011 are available and CONFIG_VIDEO_S5K4ECGX is not set. Is this an issue with the build?

• 1

  Reputation Points

• 8 replies
• 4.6k views
• 2 followers

TRS-80

February 19, 20215 yr

I need to use a 10 inch 800x600 DSI display in a Pine64 project and I think the easiest way to do this would be to modify the driver for the Pine 7 inch DSI display. It appears to me that the display resolution is hard coded in this driver (panel-feiyang-07024di26a30d.ko) and not supplied by a device tree overlay like some other Armbian SBCs. In the C source for this driver, I see the following data structure which defines a 1024x600 screen size for the 7 inch display ... static const struct drm_display_mode feiyang_default_mode = { .clock = 55000, .hdisplay = 1024, .hsync_start = 1024 + 310, .hsync_end = 1024 + 310 +…

• 0

  Reputation Points

• 1 reply
• 2.8k views

DasFisch

January 21, 20251 yr

This is my DTS file for OrangePi Zero2, opened UART5 for attach a GPS module on GPIO. Tried to add 1wire, PPS and SPI , but can't work. maybe help someone. sun50i-h616-orangepi-zero2.dts

• 0

  Reputation Points

• 4 replies
• 5k views

Guest

December 4, 20241 yr

Hi, We are currently developing a low cost single board computer base on Allwinner A64 Processor. Please refer to the pine64.com and https://www.kickstarter.com/projects/pine64/577817754?token=12cf383f for more detail on the board. Currently we requesting open source community to participate and help to bring up Linux BSP to Ubuntu. Please let us know if you are interested. Thanks and regards, KH Goh

• 1

  Reputation Points

• 69 replies
• 70.6k views
• 2 followers

Kris

June 1, 20179 yr

Hi, I need linux kernel source to compile a custom module. The one I downloaded from kernel.org did not work, got module format error, indicating the kernel is different. i did not have this problem compiling the same module for Armbian lepotato (amlogic) Where do I get the kernel source for my Orangepi Zero 2? Linux orangepizero2 6.12.20-current-sunxi64 #1 SMP Sat Mar 22 19:54:28 UTC 2025 aarch64 GNU/Linux linux-headers-current-sunxi64/bookworm,now 25.2.3 arm64 [installed] Armbian Linux current headers 6.12.20-current-sunxi64 linux-image-current-sunxi64/bookworm,now 25.2.3 arm64 [installed] Armbian Linux current kernel image 6.12.…

• 0

  Reputation Points

• 8 replies
• 6.7k views
• 1 follower

ovacikar

October 4, 20251 yr

I flashed a fresh image to my uSD card via dd. $ sudo unxz -c Armbian_25.5.1_Tritium-h5_trixie_current_6.12.30_minimal.img.xz | dd of=/dev/sdf bs=1M oflag=direct conv=fsync status=progress iflag=fullblock When I loaded the uSD into my Tritium-H5 all I got was just the red power light, but no activity. Tried a few different power supplies with the same result. I finally figured out that it appeared the bootloader was missing. I used Libre Tech's flash tool to flash their bootloader to my uSD card. Now I was able to get the Tritium-H5 outputting the boot sequesnce on the serial console. However, it stops at: Spoiler DRAM: 2048 MiB Trying to boo…

• 1

  Reputation Points

• 7 replies
• 7.9k views
• 1 follower

TonyMac32

September 15, 20251 yr

Hi. Is there no support for btrfs in the latest armbian-ubuntu-xenial for Pine64s? Linux pine54 3.10.104-pine64 #2 SMP PREEMPT Thu Feb 23 22:26:21 CET 2017 aarch64 aarch64 aarch64 GNU/Linux root@pine54:~# mkfs.btrfs /dev/sda1 btrfs-progs v4.4 See http://btrfs.wiki.kernel.org for more information. failed to open /dev/btrfs-control skipping device registration: No such file or directory Label: (null) UUID: d8362fb9-1b9c-4d92-8222-6745f842efcf Node size: 16384 Sector size: 4096 Filesystem size: 7.04GiB Block group profiles: Data: single 8.00MiB Metadata: DUP 368.62MiB Sys…

• 1

  Reputation Points

• 1 reply
• 3.2k views
• 1 follower

zador.blood.stained

March 28, 20179 yr

Hello all, i have some trouble with my CB1 and perhaps any of you know a solution :). I want to use the "Spoolman", a Database to watch my Filaments for 3d Printers. All my pi´s are currently in use, so i took a BTT CB1 i never touched since i got them with one of my voron Printers xD. I installed Armbian Server os i downloaded from this page, installed it and can connect with putty. I installed Spoolman and tried to connect to the PI with my Browser, but i cant reached the "Website". So i can ping from the PI into every other client into my LAN. I can ping my PI from every Client in my LAN. …

• 0

  Reputation Points

• 5 replies
• 4k views

webs

September 27, 20242 yr

I'm using a Pine 64 LTS. For this I have downloaded the SoPine images Armbian_21.08.1_Pine64so_buster_current_5.10.60.img and Armbian_21.08.1_Pine64so_focal_current_5.10.60.img Both images boot normally (including network connection), but after the update (apt update, apt upgrade) no IP4 network connection is established for eth0. For help I am very grateful for any help.

• 0

  Reputation Points

• 2 replies
• 2.7k views

Pander

August 28, 20224 yr

Looking at the new BPI M4 zero to replace a RPI zero. The official build listed does not have gpio turned or maybe just not built into the kernel. If I download the image from the BPI website it has it but it based on bullseye and the image is broke. I built my own image but still no go so I am not sure what is wrong. I have built images for other boards and projects with success so that's not the problem. I have a 3.5" TFT touch screen and some relays that I need to run along with a sensor.

• 1

  Reputation Points

• 8 replies
• 6.2k views

iGNUiCould

February 3, 20251 yr

HI, recently downloaded Armbian Jammy CLI for Orange Pi Zero 2 It boots up but doesn't display anything on HDMI. I have to access it via remote ssh on another computer. Any way to enable the HDMI. I was hoping to run a desktop on it. Reading different forums it's suggested that the default check is too short so HDMI is disabled but I've no idea how to disable this. Will there be a desktop version of Jammy for Orange pi Zero 2 available to download? I'm using Jammy with a desktop on a Orange Pi One and it works fine. Thanks

• 0

  Reputation Points

• 3 replies
• 3.3k views

ALIGMSTEN

November 24, 20223 yr

Hi all, I’m trying to get KlipperScreen running directly on the framebuffer on a BigTreeTech CB1 that’s using an Allwinner H616B chip. It’s running Armbian Bookworm (kernel 6.6.66-vendor-sunxi64, Dec 2024 build) on a Manta M8P V2.0 board with a TFT35-SPI display that shows up as fb_st7796s. The goal is to have KlipperScreen render directly to /dev/fb0 without needing a desktop or HDMI. The framebuffer itself seems fine as the screen shows the BigTreeTech logo on boot, and I can write to it manually, so the driver appears to be working correctly. KlipperScreen installs fine, the Python environment and dependencies are all in place, but when I launch it, I always ge…

• 0

  Reputation Points

• 1 reply
• 3.3k views

JohnTheCoolingFan

October 25, 2025Oct 25

Hi everyone I just want to ask a question, Im using Miktver 7 inch HDMI touch screen lcd and Orange Pi one. The hdmi port and touch port connects fine to the orange pi one but the touchscreen not responding, but when I connect the Miktver to my laptop the touchscreen is responding. My question is what should I do to have touchscreen response to the orange pi one? The OS that i use is android 4.4.2

• 0

  Reputation Points

• 4 replies
• 3.5k views
• 2 followers

Jose Fernando Babasa

October 14, 20232 yr

I wanted to try anything other than the original image that the device came with. I was more interested in the Kali port but after trying for a few hours with pretty much all the images available here I had to revert to the original one. So I was wondering if anyone here ever tried these images or could give me some hint on what is wrong with it ? Basically just getting a red led with no display when trying all the images. I know the original image had a some sort of special boot process where the initial startup would take some time but I know nothing else about armbian at this point. My goal was to start doing some test with kali liking t…

• 0

  Reputation Points

• 1 reply
• 2.1k views

Igor

April 7, 20251 yr

Hello I've tried both Bookworm and Jammy (also older version). None boot up - nothing. The red LED starts blinking after after a few seconds. Yes the SD card is good, Yes the power supply is good (both work with the official images). Yes I've tried different SD card and power supplies. Is there an image/version someone can confirm was tested and works? thank you

• 1

  Reputation Points

• 33 replies
• 19.3k views
• 1 follower

Gunjan Gupta

February 6, 20242 yr

Greetings, I've built a custom image for the BPI M4 Zero and have been using a wired USB cable for my config and development work, It's final destination will require wireless. So I started to configure that today and discovered that it does not find any wireless access points. The device exists. 3: wlan0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN group default qlen 1000 link/ether ac:6a:a3:3f:9c:65 brd ff:ff:ff:ff:ff:ff There is an overlay loaded (I did not add it, it was part of the image build) overlays=bananapi-m4-sdio-wifi-bt usbhost bananapi-m4-pi-5-6-i2c0 bananapi-m4-pi-7…

• 1

  Reputation Points

• 13 replies
• 7.4k views
• 1 follower

-jk-

August 4, 20251 yr

(One liner added later : the problem turned out to be the Cisco SOHO switch. They're "broken from the factory". Not what you'd expect, normally or in particular from Cisco.) Hi, everyone. I've taken the liberty of posting here with regard to my problem as I have the understanding the PINE64 forums proper are run by crazy people; my thought being to stay away from there. So, I have a 1 GB PINE64. I have ethernet performance problems - but NOT, I believe, in any way related to the early production models with their hardware fault or with gigabit ethernet being flakey. My PINE64 is in fact connected to a 100mbit hub, and is …

• 1

  Reputation Points

• 4 replies
• 3.7k views

tkaiser

June 11, 20179 yr

Hello all you awesome community members! So I got this Pine a64+ during their Kickstarter campaign. Initially I used it as a little play desktop. I never really found a use for it until very recently. I decided to use it as a little software Squeezebox client. I installed Armbian 22.04 server. I then setup alsa to use the HDMI audio as default output. I installed squeezelite and it immediately found and connected to my LMS (Logitech Media Server) running on my server. At this point I figured all was good. The sound was working great through my receiver. The next morning (Sunday) the kids could not get the TV sound to work. So of course …

• 0

  Reputation Points

• 0 replies
• 2k views
• 1 follower

BJWTech

July 25, 20224 yr

Armbian 22.11 Bullseye / Jammy Kernel 4.9.318 or 6.1.4 Release date: Jan 10, 2023 Legacy kernel has more or less full hardware support, while mainline lack functions such is wireless, HDMI, ... https://www.armbian.com/orange-pi-zero-2/ Looking for maintainer!

• 0

  Reputation Points

• 0 replies
• 7.3k views
• 1 follower

Igor

January 10, 20233 yr

LCD support does not appear to be working in the latest builds (stable kernel 5.8.6, development kernel 5.9.7) My understanding is that this has been an issue for a while with A64 boards, specifically the Pine64, but that it was working at one time. Here's what I've tried so far: -Followed instructions at https://docs.armbian.com/Hardware_Allwinner/ and added "setenv video-mode sunxi:480x272-24@60,monitor=lcd,hpd=1,edid=1" to boot.cmd and put "saveenv" at the end, re-compiled boot.scr -Did a modprobe of panel-olimex-lcd-olinuxino -Rebooted several times -Ensured that LCD jumper was closed and verifie…

• 1

  Reputation Points

• 5 replies
• 4.1k views
• 1 follower

Digitalman1983

November 24, 20205 yr

Pardon my noob question, I am still learning. I have been running Armbian on my Pine board for quite some time, now I would like to use it as a NAS. I really have no idea how or where start. thanks

• 0

  Reputation Points

• 28 replies
• 11.6k views

clarkss12

August 13, 20179 yr

First off, I would like to give the crew at Armbian a huge heartfelt thanks for all the awesome work you do under sometimes trying conditions. I would like to present Archian, the bastard child of Armbian & Arch. Why … well, the project I am working on needed current versions of phosh & plasma-mobile and the versions on jammy/bookworm were quite old. The OPi supplied image was quite flaky so I had to find a way to mash these together. And this is the result. It does need to be run as root ! The script has 3 arguments: init - downloads the armbian image file, arch rootfs and arch packages. You need to then write …

• 0

  Reputation Points

• 2 replies
• 6k views

Curious

November 17, 20241 yr

I cut/paste a related information exchange I had w/ Kent from the gpiod mailing list. The arbian-monitor output is in the attached file. >>>>>>>> I wired a GPIO Pin to GND. Upon the cmd: sudo gpiomon -r -n1 -Bpull-up <chip> <offset> the program exits immediately with 1 event, although there was never a rising edge due to the fix wire to GND. Is this a feature or a bug, and is it reproducible? < Not a feature and not reproducible for me on a Raspberry Pi4 with the setup you describe, so probably a bug specific to your hardware platform, whatever that may be. If it is 100% reproduceable for you, and assuming it is a…

• 0

  Reputation Points

• 11 replies
• 7.3k views
• 1 follower

Hans Kurscheidt

July 17, 20224 yr

Looking for a working Armbian OS for Orange Pi Zero 2 seeing alot about newer images not working if anyone has confirmed working image for Running Klipper that would be appreciated Ive tried to flash both the cli images from the orange pi zero 2 section of armbian site but neither result in lights.

• 0

  Reputation Points

• 3 replies
• 5.3k views
• 1 follower

Tina

December 25, 20223 yr

So there is some weirdness happening with Armbian on the Orange Pi Zero 2 that I bought from Amazon. These are the V1.5 version of the hardware. With the Orange Pi image (which looks strangely like armbian), once the device is booted, the red led goes off, and the green led turns on. With the armbian image, the red light stays on, and the HDMI output does not turn on in the CLI image. This led me initially to think this board was not working. Once I hooked up a USB to Serial interface, I noticed it booted. Well, at least when the SD card was seated correctly, but that is a hardware problem. Once booted, `armbian-config` does not show the wif…

• 0

  Reputation Points

• 3 replies
• 3.5k views
• 1 follower

ALIGMSTEN

January 10, 20233 yr

Hi, Is possible to solve problem ? After reboot command orange pi zero 2 not want start and it stay turner off . I read article about changing R_WDOG instead of WDOG in ATF fix for different boad: Thanks

• 0

  Reputation Points

• 1 reply
• 3.5k views

cabanak

November 8, 20223 yr

I'm using image Armbian_23.8.3_Orangepizero2_bookworm_current_6.1.53 I'm building a DTS overlay for a SPI Touchscreen and every pin I try to use is showing this error: [ 1.441808] sun50i-h616-pinctrl 300b000.pinctrl: pin PC11 already requested by 5011000.spi; cannot claim for 300b000.pinctrl:75 [ 1.441817] sun50i-h616-pinctrl 300b000.pinctrl: pin-75 (300b000.pinctrl:75) status -22 [ 1.441829] sun6i-spi 5011000.spi: cannot register SPI master I'm trying to configure my touchscreen dts to use the SPI1.0 & SPI1.1. However, the pins exposed on the headers are all allocated for device use under 300b000.pinctrl. How do you …

• 0

  Reputation Points

• 7 replies
• 8.1k views

robertoj

September 23, 20242 yr

Hello everyone, I'm trying to get an ST7735S LCD display working with my Orange Pi Zero 2 (H616). This setup was working correctly with older Armbian kernels, but after a recent update, I can no longer get the SPI device to appear. I have already tried a couple of different configuration methods without success. System Information: Board: Orange Pi Zero 2 (H616) Display: ST7735S (SPI) Kernel Version: Linux orangepizero2 6.12.43-current-sunxi64 #2 SMP Wed Aug 20 16:30:58 UTC 2025 aarch64 GNU/Linux I have recently updated armbian-config by running the update from the script itself. Attempt 1: Using armbianEnv.txt …

• 0

  Reputation Points

• 6 replies
• 6.6k views
• 1 follower

bsrobot

October 20, 2025Oct 20

I have an Orange Pi Zero 2 set up with Octoprint and a webcam. No keyboard or screen, all access over ssh... if it's running. If it started OK, then no problem, everything works fine. If. Usually powering it up lights up the red LED and... it ends here. I waited even half an hour, red, no boot. Occasionally - one in five-ten attempts to boot - the LED turns green after a couple seconds and the board boots fine. Very rarely the red turns to green after a minute or so, and the board boots up. Unfortunately, having no cable to connect it to a monitor or serial, my diagnostics are quite limited - after booting dmesg looks mostly clean, but maybe in case it's a sem…

• 0

  Reputation Points

• 2 replies
• 4.6k views

Werner

February 1, 20233 yr

I got my 320x240 ILI9341 touchscreen to work with the image from the OrangePI site: Armbian_23.5.2_Orangepizero2_bookworm_legacy_4.9.318_minimal The display is one I bought from Amazon Hosyond 2.8 Inches TFT LCD Touch Screen Shield Display Module 320x240 SPI Serial ILI9341 with Touch Pen Compatible with Arduino R3/Mega2560 Development Board This document was very helpful getting the display set up on the OPZero 2: https://tienda.tettsa.gt/wp-content/uploads/2022/08/OrangePi_Zero2_H616_User-manual_v3.7.pdf I still don't have the touch part working. If anyone has success getting 2 selects working with SPI1 on OPZero2 and touc…

• 0

  Reputation Points

• 3 replies
• 12.5k views

robertoj

July 16, 20242 yr

Hello, I have orange pi zero 2 but it doesn't work with armbian versions after kernel version 4.9.318, I tried many versions. When I check it through the serial port, it stays on "trying to boot from MMC1 armbian" and the led on it is constantly red. Also, if I upgrade the kernel with apt-get upgrade in version 4.9.318, the card does not boot afterward and gets a "No ethernet found" error. Versions I tried : Armbian_22.11.3_Orangepizero2_jammy_legacy_4.9.318.img [Worked but no wifi connection] Armbian_22.02.2_Orangepizero2_bullseye_legacy_4.9.255.img [Works good] Armbian_22.08.7_Orangepizero2_jammy_edge_5.19.16.img [Not working !!] Armbian_…

• 0

  Reputation Points

• 3 replies
• 4.3k views
• 4 followers

Darius82

March 7, 20233 yr

Hi team, There are no current images for Orange Pi Zero 2 at https://www.armbian.com/cf7stdb-entries/orange-pi-zero-2/ The Zero image does not work. I did manage to find an archived legacy image based on some posts from 2022 however nothing on the new kernel works. My question is this: Is there a reason why these devices require unique builds? I understand the kernel drivers may not be in 6.x for this board however I'm more referring to the huge number of builds that need to be supported. Thanks, Jason

• 0

  Reputation Points

• 3 replies
• 7.1k views
• 1 follower

stallion25

April 4, 20233 yr

Unfortunately, the Orange pi zero 2 does not start with the Armbian img, it does turn on, but there is only a white line in the top left and it does not boot any further. I once downloaded the original ubuntu image from the manufacturer, this works without problems but is just outdated. Can you take a look at it? Actually wanted to install the pi hole project with Armbian Image: Armbian 22.11 Jammy Kernel 4.9.y, Size: 445Mb, Release date: Jan 10, 2023 SHA hash | PGP signature

• 0

  Reputation Points

• 3 replies
• 7.7k views

materockt

March 2, 20233 yr

Orange Pi Zero 2 running on current image (from release date: Jan 10, 2023) fail to boot after upgrade. The boot log: U-Boot 2018.05-armbian (Jan 10 2023 - 07:48:03 +0000) Xunlong Software [00.535]CPU: Allwinner H616 [00.538]Model: Orange Pi Zero 2 I2C: ready [00.542]DRAM: 1 GiB Relocation Offset is: 35ec7000 [00.583]secure enable bit: 0 [00.586]PMU: AXP806 [00.591]CPU=1008 MHz,PLL6=600 Mhz,AHB=200 Mhz, APB1=100Mhz MBus=400Mhz [00.773]sunxi overlay merged okqv [00.776]drv_disp_init [00.805]__clk_enable: clk is null. tv_init()950 fetch tv0 err. [00.811]drv_disp_init finish [00.813]gic: sec monitor mode [00.819]flash i…

• 0

  Reputation Points

• 7 replies
• 6.7k views
• 1 follower

Igor

March 9, 20233 yr

Hello, I've been using OPiZ2 for about 2 years as Pi-hole in gravity-sync with another one (Orange Pi 3 LTS running Open Media Vault with no problem). Today I found out it was dead, no connection and just a blank screen. It must have happened in the past few days, because I checked it on sunday and it was up and running. I'm almost sure I was using it with Armbian_22.11.0-trunk_Orangepizero2_sid_edge_6.0.6. i have extracted the sd card and checked it on Windows with Diskinternals reader and Minitool Partition Wizard, no problem found. The most recent files and folders have been modified on 2024-07-12, eleven days ago, much prior to my checking, so…

• 0

  Reputation Points

• 2 replies
• 3.2k views
• 1 follower

jan_axhell

July 29, 20242 yr

Thanks for everyone's work on this project! I'm working on a few Orange Pi Zero 2 v1.5's, and they won't finish booting on a few of the most recent images. (Just testing jammy right now to keep things consistent) Boot Successfully: Armbian_22.11.3_Orangepizero2_jammy_edge_6.1.4 Armbian_22.05.3_Orangepizero2_jammy_edge_5.17.11 Do Not Boot Successfully: Armbian_23.02.2_Orangepizero2_jammy_edge_6.1.11 Armbian_22.11.1_Orangepizero2_jammy_edge_6.0.10 Armbian_22.08.7_Orangepizero2_jammy_edge_5.19.16 Typically, when the boot fails, all I get is this over serial with no LED's: U-Boot SPL 2022.07-armb…

• 1

  Reputation Points

• 3 replies
• 5.3k views
• 1 follower

ALIGMSTEN

March 1, 20233 yr

My OPIZ2 was working happily with Armbian_bullseye 22.11, but due to the wifi issue, I download the Armbian_bullseye_22.02 dan flash the image into the same working SD card (overwritten). But now my OPIZ2 would not boot anymore, nothing seen in the serial communication either. No red/green LED ever lit. Sadly, this is my 2nd dead OPIZ2..... Seeking for help if those boards are still recoverable...

• 0

  Reputation Points

• 1 reply
• 2.8k views
• 1 follower

Werner

January 6, 20233 yr

Hello everyone, I am using an Orange Pi Zero 2W with a graphical user interface (GUI). I downloaded and installed the official Orange Pi Zero 2W image. Unfortunately, I keep running into a Wi-Fi connection issue. After booting, the system repeatedly asks me to enter my Wi-Fi password. If I don’t enter it, I have no internet connection. What’s interesting is: If I disable and re-enable Wi-Fi in the network manager, it automatically reconnects to the known network without asking for the password again. Alternatively, a system reboot also restores the Wi-Fi connection automatically. I have already seen o…

• 0

  Reputation Points

• 1 reply
• 1.9k views
• 1 follower

Werner

January 5Jan 5

Good day. We have a medical device project. We always wanted to have bananapi m4 zero hardware on our main board, with armbian as an OS seeing as it is up to date and fit for purpose. However, our Hardware supplier has not been able to solve the full hardware stack. We currently are able to boot the orangepi zero 3 image... and as far as I understand the hardware chips are very close to each other. We also have emmc on the board. But not working. We desperately need hardware development help so we can get banana pi m4 zero armbian supported OS working. Any advise please. We have 2GB RAM , allwinner h618, axp313. All the same as orangepi zero 3. Pl…

• 0

  Reputation Points

• 2 replies
• 4.4k views
• 1 follower

SUPA

February 22Feb 22

Hi guys, I downloaded Armbian 24.2.1 Jammy CLI (Armbian_24.2.1_Orangepizeroplus_jammy_current_6.6.16.img.xz) for the Orange Pi Zero Plus and it's not booting. Boot log below: U-Boot SPL 2024.01-armbian (Feb 09 2024 - 19:21:37 +0000) DRAM: 512 MiB Trying to boot from MMC1 NOTICE: BL31: v2.9(debug):armbian NOTICE: BL31: Built : 19:20:27, Feb 9 2024 NOTICE: BL31: Detected Allwinner H5 SoC (1718) NOTICE: BL31: Found U-Boot DTB at 0x20a4ef0, model: Xunlong Orange Pi Zero Plus INFO: ARM GICv2 driver initialized INFO: Configuring SPC Controller NOTICE: PMIC: Assuming H5 reference regulator design INFO: BL31: Platform setup done INFO: BL31:…

• 0

  Reputation Points

• 2 replies
• 3.8k views
• 1 follower

cvxx

April 26, 20242 yr

From reading through the forums I cobbled together what I thought might work for getting spi nor to boot, but it fails: Activate the spi-jedec-nor overlay in /boot/armbianEnv.txt : overlays=spi-jedec-nor param_spinor_spi_bus=0 Then, after reboot, "cat /proc/mtd" should produce something like this : dev: size erasesize name mtd0: 00200000 00001000 "spi0.0" Here is where it fails - I just get the heading, with no mtd0: 00200000 00001000 "spi0.0". Should I be using a different param_spinor_spi_bus? I assume that once that works, the following will work? apt-get install mtd-utils cat /usr/lib/linux-u-boot-next-orangepiz…

• 1

  Reputation Points

• 43 replies
• 36.6k views

fcollingwood

September 22, 20224 yr

Orange pi zero plus 'shutdown -r now' shuts down, won't reboot within 20 minutes. Have to power cycle. reboot worked initially. I installed a few bits and firefox. Not sure what triggered it. In other reports I read kernel upgrades. Could it do a lengthy fsck during boot? 64 GB SD-card/file system. Would some (red or green) LED shine? It's all dark.

• 0

  Reputation Points

• 4 replies
• 7.1k views

schwar3kat

April 14, 20224 yr

I have an orange pi zero 2 and I need to configure the 1-wire protocol. I need to know which gpio pin to connect to. Thanks

• 1

  Reputation Points

• 8 replies
• 7.2k views
• 2 followers

lampra

January 31, 20233 yr

a device hooked up on the microusb OTG port does not power up anymore (webcam, used to work a long time ago then I did system update but did not configure the webcam again, until now...) bruno@orangepione:~$ sudo cat /sys/kernel/debug/gpio [sudo] password for bruno: gpiochip0: GPIOs 0-223, parent: platform/1c20800.pinctrl, 1c20800.pinctrl: gpio-15 ( |orangepi:red:status ) out lo gpio-166 ( |cd ) in lo ACTIVE LOW gpio-204 ( |usb0_id_det ) in lo IRQ gpiochip1: GPIOs 352-383, parent: platform/1f02c00.pinctrl, 1f02c00.pinctrl: gpio-354 ( |us…

• 0

  Reputation Points

• 4 replies
• 3.9k views

bschwand

January 11, 20242 yr

Hello, Ive setup ssh and did some stuff on my OrangePi, when i came back and plugged my phone into power hub my OrangePi was connected to, it restarted and stopped at disk manager, i restarted it and it gave lots of failed messages, i restarted and it didnt work anymore :( it only gives yellow ethernet led and nothing else, i also reflashed sd card because it got all partitions gone after that incident Please help!!!

• 0

  Reputation Points

• 1 reply
• 2.7k views
• 1 follower

Werner

December 17, 20241 yr

After upgrade at 30.5. I can't boot the orangepi zero 2 (4.9 kernel). Is there any possibility to reload the old kernel or other ways to fix it? Thanks in advance for answering. config-4.9.255-sun50iw9

• 0

  Reputation Points

• 21 replies
• 11k views
• 1 follower

ALIGMSTEN

June 16, 20224 yr

Image used: Armbian_21.08.1_Orangepizero2_focal_edge_5.13.12.img U-Boot SPL 2021.10-rc1-armbian (Aug 08 2021 - 16:21:36 +0200) DRAM: 1024 MiB Trying to boot from MMC1 NOTICE: BL31: v2.5(debug):87311b4-dirty NOTICE: BL31: Built : 16:21:30, Aug 8 2021 NOTICE: BL31: Detected Allwinner H616 SoC (1823) NOTICE: BL31: Found U-Boot DTB at 0x4a082220, model: OrangePi Zero2 INFO: ARM GICv2 driver initialized INFO: Configuring SPC Controller INFO: PMIC: Probing AXP305 on RSB INFO: PMIC: aldo1 voltage: 3.300V INFO: PMIC: aldo2 voltage: 3.300V INFO: PMIC: aldo3 voltage: 3.300V INFO: PMIC: bldo1 voltage: 1.800V INFO: PMIC: dcdcd voltage: 1.500V IN…

• 0

  Reputation Points

• 1 reply
• 4.9k views

izeroo

November 22, 20214 yr

Armbian image version: Armbian 22.08 Bullseye Kernel 5.19.y, Size: 388Mb, Release date: Oct 22, 2022 Bug report: 1: When i reboot my orangepi zero 2 , my devices will be power off. 2: I use the newest image , display nothing on screen. But i have an older version image. It display to screen by Micro-HDMI perfect. 3: Is possible to light up green LED after system start? I mean, when the device power on, red LED light up. It's nice. But if light the green LED up after system start up, I can know my system get no troubles and it's running now.

• 0

  Reputation Points

• 3 replies
• 6.1k views
• 1 follower

tpou

December 29, 20223 yr

It looks like the May 28th release produced issues. I tried using the images on the OrangePI Zero 2 and the led only stays red. The prior version worked with no issue.

• 0

  Reputation Points

• 5 replies
• 6.3k views
• 1 follower

Dominik

August 14, 20224 yr

Before complaining about an issue read this! tl;dr: Put your Zero2 and/or any other H616 based device on the shelf and WAIT for proper support to come. And no. There is no ETA. Assuming usable state end 2021/beginning 2022. Software support is still work in progress and under heavy development. Provided preview images can break any time. Do not report this, we are aware of that and can/will not help you with that if you are not willing to investigate and research by yourself. Feel free to join fellow developers to their efforts to create proper software support. But don't waste our time with complains. Thank you! https://github.com…

• 1

  Reputation Points

• 426 replies
• 257.7k views
• 28 followers

Werner

July 9, 20224 yr

I just download the image for Oranegpi Zero2 : Armbian 21.08 Bullseye Kernel 4.9.y, Size: 337Mb, Updated: Jan 24, 2022 And I use "usbimage" write the image to my SD card . And, nothing happen, Red LED and Green LED not lighting. Serial Port has no any message. I have 3 SD card, 2 Orangepi Zero2. All of it I test still failure. I have a older image for Orangepi Zero2 name "Armbian_21.08.1_Orangepizero2_buster_legacy_4.9.280.img.xz". This one is useful. BUT, can not "apt upgrade". If you do so , you cannot boot up next time. So I just confuse now......

• 0

  Reputation Points

• 3 replies
• 4.7k views

TheOWL

March 12, 20224 yr

Hello, I have abandoned the Orangepizero2 I had bought months ago to use with Armbian, I have confused zero and zero 2. Seeing new release, I have just downloaded/install Armbian 22.05 Jammy. Install is ok, good work, thank you ! The wireless interface seems not enabled, I have looked at dmesg output and nmtui-connect. I could not find info about it, the board name doesn't help a lot. I understand the support of this board is pretty new. Is there a known technic to enable the wifi ? Have a nice day,

• 1

  Reputation Points

• 14 replies
• 18.2k views
• 3 followers

ALIGMSTEN

August 23, 20224 yr

Hi all, I am trying to get an OV5640 camera working on the orangePiOne. I found this thread and was wondering if the overlay (or some overlay) is still required. Without anything extra, the camera is not detected. It says that sun6i-csi and ov5640 kernel modules should be loaded, so I loaded them manually with modprobe but nothing happens and nothing is shown in dmesg. Adding the mentioned overlay with "sudo armbian-add-overlay csi-ov5640.dts" just gives me an error in dmesg at reboot time "failed on fdt_overlay_apply(): FDT_ERR_NOTFOUND Error applying DT overlays, restoring original DT" uname -a Linux orangepione2 6…

• 0

  Reputation Points

• 3 replies
• 4.2k views

bschwand

January 26, 20242 yr

Hi, I have libretech all-h3-cc h2+ DIY board booting with armbian image from https://www.armbian.com/tritium-h3/. I have updated overlays in armbianEnv.txt file to add i2c2 overlay which enable CSI in kernel. But even after I connect the camera sensor module, I can't find any `/dev/video0` and morever there is not any log in dmesg as well. Please suggest how can I add get the camera work with the board. I referred to https://forum.armbian.com/topic/7502-ov5640-on-mainline-kernel/ but as according to that, `/dev/video0` should come up automatically. I don't know what I'm missing. Please help Thanks

• 0

  Reputation Points

• 20 replies
• 11.2k views
• 1 follower

Rhythm

November 9, 20187 yr

Hi! Now that the camera interface has been merged in mainline Kernel, I would like to try to use the OrangePi OV5640 camera module on my OrangePi One. So with the latest Armbian Bionic (20.02.1, kernel 5.4.20), I have been trying to get a device tree overlay. But for now, it fails to compile with: $ sudo armbian-add-overlay sun8i-h3-csi.dts Compiling the overlay Error: sun8i-h3-csi.dts:27.23-24 syntax error FATAL ERROR: Unable to parse input tree Error compiling the overlay My current overlay looks like this: /dts-v1/; /plugin/; / { compatible = "allwinner,sun8i-h3"; fragment@0 { target = <&pio>; __overlay__ { …

• 1

  Reputation Points

• 93 replies
• 70k views
• 7 followers

bschwand

January 27, 20242 yr

I built an Ubuntu current image, as of commit f15f594d0bd4ad1e5d0fa412f1d25120e76e4f9a (Armbian-unofficial_26.05.0-trunk_Bigtreetech-cb1_noble_current_6.18.20.img) and started my newly arrived Pad 7 from it. Things that work out of the box: display, touchscreen, wifi, USB. Not working: LAN is not visible at all (only two wlan interfaces). Also, no audio device. According to schematics, audio is taken from HDMI output, so it should be supported by standard HDMI drivers. Where do I enable it in kernel config? https://github.com/bigtreetech/Pad7/tree/master/Hardware your hints will be appreciated. smar…

• 0

  Reputation Points

• 3 replies
• 1.6k views
• 1 follower

clackups

March 27Mar 27

Hello, I have a Pine64 board and recently added an audio POT with the pcm5102a chipset. It is rather difficult to get the board working/recognized. I found info on the forum saying one has to do stuff with the overlay system but only for other boards than the Pine64 and I can't get it right. aplay -l: root@pine64:~# aplay -l **** List of PLAYBACK Hardware Devices **** card 0: sun50ia64audio [sun50i-a64-audio], device 0: 1c22c00.dai-sun8i-codec-aif1 sun8i-codec-aif1-0 [1c22c00.dai-sun8i-codec-aif1 sun8i-codec-aif1-0] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: sun50ia64hdmi [sun50i-a64-hdmi], device 0: 1c22800.i2s-i2s-hifi i2s-hifi-0 [1c…

• 0

  Reputation Points

• 0 replies
• 2k views
• 1 follower

joho500

November 20, 20214 yr

Hello. I try to install ambian https://www.armbian.com/orange-pi-zero-2/ to orange pi zero 2 and get there on first start: ▒[100]HELLO! BOOT0 is starting May 13 2020 14:10:04! [105]BOOT0 commit : 593cf83 [107]set pll start [110]periph0 has been enabled [113]set pll end [115]unknow PMU [117]PMU: AXP806 [124]vaild para:8 select dram para0 [127]board init ok [129]DRAM BOOT DRIVE INFO: V0.52 [132]the chip id is 0x5000 [135]chip id check OK [137]DRAM_VCC set to 1500 mv [141]read_calibration error [145]read_calibration error [149]read_calibration error [153]read_calibration error [157]read_calibration error [161]read_calibration …

• 0

  Reputation Points

• 7 replies
• 8.4k views

ALIGMSTEN

August 22, 20224 yr

Over the years have been using the Pine64 2Gb computer as an automation server running with original Xenial Base Image [20161218-1] by longsleep. This is a first generation Pine64 2Gb computer that I got during the start up of the company. Currently utilizing a 2 AMP 5VDC PS connected to the Euler bus, heatsinks on the top and bottom of the board and a boot up 100Mb mode. It would run fine for months then occassionally wouldn't start on boot. Recently redid the box using Armbian. | _ \(_)_ __ ___ / /_ | || | | |_) | | '_ \ / _ \ '_ \| || |_ | __/| | | | | __/ (_) |__ _| |_| |_|_| |_|\___|\___/ |_| …

• 0

  Reputation Points

• 3 replies
• 3.1k views

Petee

April 17, 20197 yr

pine 64so Pine64, bananapi M64 images 19.11.3, GUI XFCE 4.12 dont not run after upgrade images 20.02 GUI does not work from begining after installed. Never mind i build 19.11.5 kernel 5.4.18 and works

• 0

  Reputation Points

• 0 replies
• 2k views
• 1 follower

constantius

April 11, 20206 yr

I am currently developing a custom board which is based of the Pine64/Pine64-R18 dev board. I previously had an issue with the ethernet not working at u-boot level using the sopine based R18 board, this I resolved by patching u-boot with the relevant emac sections that were missing from the device tree. On the custom board we have used the R18 processor with the LAN8720 ethernet-phy chip rather than the RTL8211 used by the pine, and can't get the ethernet to initialise. We have checked rmii clock timings etc and compared the custom board to the Pine and have noticed the following:- MDC has been measured to be running at 18.6Mhz, resultin…

• 0

  Reputation Points

• 2 replies
• 3.5k views
• 1 follower

Gavinb

September 7, 20188 yr

How can PINE A64 GPU hardware acceleration be enabled? Playing a 24 fps full HD MP4 movie is not working smoothly. Here are some results on Armbian Jammy cli from June 30 version 22.05.3 with only installing via apt-get: - mpv, best result, probably ~10 fps - mplayer -vo sdl/fbdev2, probably ~5 fps - cvlc, probably 2~3 fps - kodi, probably 1~2 fps - gst123, could not get it running because issue with ALSA The fps are sort of guessed. Any other software and tips for testing are welcome. None of the movies playing played sound. speaker-test also did not play sound even though alsamixer showed all is well. Tips for this please too. …

• 0

  Reputation Points

• 3 replies
• 3k views
• 1 follower

Pander

October 3, 20224 yr

Yesterday, I upgraded my Pine A64 LTS to the 5.10.21 kernel: The system rebooted just fine, though took longer then before. I didn't realize why until today, when I tried to access /media/mmcboot and discovered that it wasn't there. In fact, there is no /dev/mmcblk0p1 device at all. It's bizarre: it boots from the MicroSD, switches to my SSD, but then the MicroSD card device is simply gone when the system is up. I do not see this on two other Pine A64 (not LTS) systems. I was able to mount the microSD card on one of the other systems, and fsck reported everything was fine. I could also see all of the files just fine. The files …

• 1

  Reputation Points

• 11 replies
• 5.1k views
• 2 followers

goathunter

September 5, 20215 yr

I just received my Pine A64 LTS V1.2 board, 7" LCD TOUCH SCREEN PANEL, and playbox enclosure. I flashed an sd card with Linux Armbian Focal: https://dl.armbian.com/pine64so/Focal_current If the LCD is connected via the DSI port, the boot freezes during UBoot. If I disconnect the LCD from the DSI connector, we get past the first part of UBoot immediately and it eventually brings me to the login prompt. I do observe that the green power LED appears to light then turn off about when it freezes on boot with the DSI connector attached. I have the official 5 V 2 A SOPINE supply from the store (https://store.pine64.org/product/sopine-baseboard-us-p…

• 0

  Reputation Points

• 4 replies
• 3.8k views
• 1 follower

mudcat

August 9, 20206 yr

Hi!I am trying to connect B101UAN01.7 display(1920 x 1200) without any success.Is pine64's driver supports other display than native 7"? If so, then could you please help me to understand where can be error?Here is cutout from my device tree for 10.1" display lcd0@01c0c000 { compatible = "allwinner,sunxi-lcd0"; pinctrl-names = "active", "sleep"; status = "okay"; device_type = "lcd0"; lcd_used = <0x0>; lcd_driver_name = "mb709_mipi"; lcd_backlight = <0x32>; lcd_if …

• 0

  Reputation Points

• 0 replies
• 2.8k views
• 1 follower

vicb

June 1, 20179 yr

Hi, I have a couple of these boards which I have been using with Armbian and the old, 3.10 kernel. Ideally I would really like to go mainline as later kernels have some functionality that would be useful for my use of the board. The only remaining reason (apart from cpu freq.) for sticking to the 3.10 kernel has been the lack of MIPI DSI support in mainline, but now I see that, despite the Matrix at http://linux-sunxi.org/Linux_mainlining_effort still being red for A64 mipi, some work is being/has been done by Maxime Ripard. I'm just wondering if anyone here knows if a working mainline kernel with DSI for the Pine 64 is starting to look like a p…

• 1

  Reputation Points

• 126 replies
• 59.6k views
• 9 followers

jam

May 25, 20215 yr

After a reboot, my HDMI does not send anymore signal. The resolution of my desktop (using x11vnc) is 1024x768. This is the pastebin from dmesg: dmesg from Pine64 There are some error on sunxi8. Can someone help me?

• 0

  Reputation Points

• 7 replies
• 5.6k views
• 1 follower

jernej

April 12, 20206 yr

Everytime i reboot and/or turn-off both of my Pine A64, they dont boot again until i manually turn-off/on them a lot of times, is there any fix to it? the img i use is: Armbian_5.35_Pine64_Debian_jessie_default_3.10.107.img

• 0

  Reputation Points

• 4 replies
• 2.5k views

barart

February 7, 20188 yr

I recently upgraded my working Pine A64-LTS board to Armbian 10.9 by using standard 'apt-get update' followed by 'apt-get upgrade' The update went fine (no error messages) and i rebooted the unit. The unit was unable to mount the root filesystem it complaint about UUID probably incorrect, but this was not the case. After doing some research i found out that the DTB file was changed on the mmc0 part. The option 'non-removable' was removed wich let to the kernel using the PUSH-PUSH routine? cd pins to see if a SD card is present. It looks like it that not all versions of the Pine A64-LTS have this pin or maybe in the past …

• 0

  Reputation Points

• 0 replies
• 6.6k views
• 1 follower

Patrick Peters

May 5, 20215 yr

I recently bought a couple of A64-LTS boards from the Pine Store, but I couldn't get the official Armbian images to boot on them. https://www.armbian.com/pine64/ I could, however, get Manjaro to boot on them, and when I created an SD card with U-Boot from the Manjaro SD card, and the partition from the Armbian (Bullseye CLI) image, it booted into Armbian. I noticed, though, that Manjaro distinguishes between the Pine A64(+) and the Pine A64-LTS. Tow-boot also makes the same distinction. So I wondered if maybe Armbian wasn't booting on my A64-LTS boards because it wasn't making that distinction, but it should be. (I also noticed that …

• 1

  Reputation Points

• 11 replies
• 8.2k views
• 1 follower

stormwyrm

December 23, 20232 yr

I believe the TP-Link AC600 wireless usb adapter uses the Mediatek chipset. Has anybody got this running on a Pine A64?

• 0

  Reputation Points

• 2 replies
• 4.4k views

Andro

August 10, 20179 yr

Hello , i have used now for some year armbian for this board, very many thanks for that; lately have updated to newer version Debian Trxiie and found that "htop" report a higher CPU usage after freshboot (around 50%) whereas previously it sat a 10% probably; now when evoking htop it gives (CPU offline for core 2-3-4) also nproc report "1" instead of "4"=? not sure if this an error ; noticed a similar report of nproc also with a build of volumio; thank you very much;

• 1

  Reputation Points

• 4 replies
• 2.1k views

kapqa42

August 28Aug 28

U-Boot SPL 2019.01-armbian (Apr 08 2019 - 01:44:37 +0200) DRAM: 4096 MiB Trying to boot from MMC1 NOTICE: BL31: v2.1(debug):8a08e27 NOTICE: BL31: Built : 00:11:54, Apr 5 2019 NOTICE: BL31: Detected Allwinner H6 SoC (1728) NOTICE: BL31: Found U-Boot DTB at 0xc06ea70, model: Pine H64 INFO: ARM GICv2 driver initialized NOTICE: PMIC: Probing AXP805 NOTICE: PMIC: AXP805 detected INFO: BL31: Platform setup done INFO: BL31: Initializing runtime services WARNING: BL31: cortex_a53: CPU workaround for 819472 was missing! WARNING: BL31: cortex_a53: CPU workaround for 824069 was missing! WARNING: BL31: cortex_a53: CPU workaround for 827319 …

• 1

  Reputation Points

• 6 replies
• 8.9k views

hexdump

June 17, 20206 yr

Hello community, I got some brand new Pine H64 Model B this week. Anyone interested in a free test device? Markus

• 1

  Reputation Points

• 88 replies
• 35.8k views
• 8 followers

Igor

May 10, 20197 yr

I've tried searching the forums for info on the Pine H64 Model B, but all the information is rather outdated, so I have some questions: Is this board supported by the images on the Pine H64 page which show a Model A board? (There was mention they work but without ethernet support.) Has ethernet support been fixed in the Pine H64 images for Model B? Are nightly builds still disabled for these boards?

• 1

  Reputation Points

• 25 replies
• 8.3k views
• 2 followers

Neko May

January 5, 20206 yr

I have a brand new Pine H64-B. I can get AOSC to start on it, but needed to get Ambian to work. It will partly boot up, but never gets to the the CLI or desktop I have a good SD Card (AOSC works fine, works on a Pi; tried 32G and 128G, ) and power supply. Armbian_5.89.190626_Pineh64_Debian_stretch_dev_5.1.12.img Armbian_5.88_Pineh64_Debian_stretch_dev_5.1.7.img Armbian_5.88_Pineh64_Ubuntu_bionic_dev_5.1.7.img They get up to: Welcome to Debian GNU/Linux 9 (stretch)! ... snip ... [ OK ] Started Flush Journal to Persistent Storage. [ OK ] Started udev Kernel Device Manager. [ OK ] Started udev Coldplug all…

• 0

  Reputation Points

• 1 reply
• 3.9k views

Igor

July 7, 20197 yr

My Pine64 boots using Armbian_5.30_Pine64_Ubuntu_xenial_default_3.10.105_desktop. I have added pine64_lcd=on to /boot/armbianEnv.txt and updated the module file. But now when I plug in HDMI nothing displays on the HDMI screen. I also can not see it as a secondary display. Is it possible to have both displays on or can I only have one, having to remove LCD if I want HDMI output?

• 0

  Reputation Points

• 0 replies
• 2.7k views

Zululander

August 14, 20179 yr

Hi, I've changed the default console from ttyS0 to ttyS3, using the mainline kernel with overlay "/boot/dtb/allwinner/overlay/sun50i-a64-uart3.dtbo". Unfortunately when I run command "sudo shutdown -r now" (or sudo reboot) my pine shuts down instead of reboot (although the console output says "reboot: Restarting system" at the end.) [Hard reset reboot works with "reboot -f" using ttyS3 console]. Using the standard console I can reboot my pine without problems. What could case this behavior? Is it necessary to disable or kill a ttyS3-process before the reboot?

• 0

  Reputation Points

• 2 replies
• 3k views
• 1 follower

linda

April 3, 20188 yr

[Photo of LED] http://www13.plala.or.jp/pskitty/img/pa64sysled/DSC_0045-photo-led.jpg [LED holes illustration] http://www13.plala.or.jp/pskitty/img/pa64sysled/pine64-drawing-v2-p6.jpg Hi, this is my first post here, after few first hours with Armbian on a 1G Pine64 board... I did a small initialization script to turn "ON" the System LED (upopulated "LED" label on the board), so that it helps to user to know that the boot process is running... I like to ask the dev team to think about including something like it to the Pine64 Armbian images, since the Pine64 board itself does not provide such indicator, the user is left in…

• 1

  Reputation Points

• 10 replies
• 6.6k views
• 1 follower

ecolezen

June 18, 20179 yr

Ethernet does not appear to be working on the latest versions of Armbian with pine64 512mb model (has only 10/100MBps Eth) Current Version: ARMBIAN 5.83 stable Debian GNU/Linux 9 (stretch) 4.19.38-sunxi64 - I have tried 2 boards in case its a hardware issue, no go. - Ethernet works with Armbian Xenial (3.10 legacy kernel) - The network port shows activity when initially powering up, but when it begins boot lights go out. - I have tried many older and newer kernels, including the new 5.1.0 dev kernel, with no luck. - Eth0 show up with command "ip address" but not with "ifconfig" - When I try running "sudo ethtool eth0" I get error…

• 0

  Reputation Points

• 10 replies
• 7.8k views

Daniel B

October 25, 20205 yr

Hello, First of all, thank you so much for putting these images together. Kudos to you all for some great work! Now on to my issue. I installed Xenial build and it booted up nicely to XFCE. The only issue I am having is no audio over HDMI. I know the display works for HDMI audio as my nVidia Shield works fine. Any help on determining the issue? If you need any logs, boot messages, and/or config files, let me know. Thank you in advance, Brian

• 0

  Reputation Points

• 1 reply
• 2.9k views

Igor

July 11, 20188 yr