Rockchip

While a friend of mine was developing my Rockchip rv 1126 device, we lost access as a result of a wrong operation. The device is powered on. the red light on the back is on, but we cannot access the device we have previously identified from the ip's. When I try the usb port on the device, I get a device not recognized warning in ubuntu 22.04 and windows10. Can anyone help me to reinstall the operating system or access the device? Thank you.

When using my (intel) laptop I get when I check my nvme (as root): # lspci -vvvs 01:00|grep -E "ASPM|L1" DevCap: MaxPayload 512 bytes, PhantFunc 0, Latency L0s <1us, L1 unlimited LnkCap: Port #0, Speed 16GT/s, Width x4, ASPM L1, Exit Latency L1 <8us ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp+ LnkCtl: ASPM L1 Enabled; RCB 64 bytes, Disabled- CommClk+ Capabilities: [900 v1] L1 PM Substates L1SubCap: PCI-PM_L1.2+ PCI-PM_L1.1+ ASPM_L1.2+ ASPM_L1.1- L1_PM_Substates+ L1SubCtl1: PCI-PM_L1.2- PCI-PM_L1.1- ASPM_L1.2- ASPM_L1.1- L1SubCtl2: T_PwrOn=500us With the 6.1-…

Hello, After facing multiple instabilities during previous week, I decided to completely reinstall my helios64 to a fresh image (bookworm) from the download section. But before doing that, I need some help/have some questions: Currently, I’m using emmc to host the system, how can I completely backup and restore the system on an sd-card (you know, just in case...) Does the current image (https://dl.armbian.com/helios64/Bookworm_current_minimal) already contains usb drivers from:and this dtb file: Does the process to install the new image on emmc is the same as the one documented on Kobol site? At the moment, I’m a little bit los…

Hello everyone, I somehow managed to brick my OrangePi 4 LTS. I had the Armbian running on it and decided to try the newest install in a minimal format so no desktop. Installed it, made all the setup and restarted. Since then no other image works, neither the official orangepi images nor any other armbian image. I tried booting off without the SD Card, trying to flash another OS with the SD card and read out the TTL and this is what I get: DDR Version 1.25 20210517 In channel 0 CS = 0 MR0=0x18 MR4=0x2 MR5=0x1 MR8=0x10 MR12=0x72 MR14=0x72 MR18=0x0 MR19=0x0 MR24=0x8 MR25=0x0 channel 1 CS = 0 MR0=0x18 MR4=0x2 MR5=0x1 MR8=0x10 MR12=0x72 MR14=0x72 MR18=0x…

flashed Both Armbian_community_24.8.0-trunk.495_Tinker-edge-r_noble_current_6.6.43_gnome_desktop, Armbian_community_24.8.0-trunk.495_Tinker-edge-r_noble_current_6.6.43_gnome_desktop. stalling cpu, and failing to boot. logs for both attached. Armbian_community_24.8.0-trunk.495_Tinker-edge-r_noble_current_6.6.43_gnome_desktop.txt Armbian_community_24.8.0-trunk.495_Tinker-edge-r_bookworm_current_6.6.43_minimal.txt

With the recent update of the kernel "edge" package (6.8.11-edge-rockchip64) when the system boots. interfaces get different names (they used to be "end0" and "eth1" before, and now they are "eth0" and "eth1"), but more importantly, they both show different MAC address (the old address returns when previous kernel is booted). It took some time to figure why it did not appear on its prescribed address... Anyone notice this, or has a clue why? Armbian 24.5.5 noble Linux kobol 6.8.11-edge-rockchip64 #1 SMP PREEMPT Sat May 25 14:28:41 UTC 2024 aarch64 aarch64 aarch64 GNU/Linux

Hello everyone, I'm experiencing frequent network disconnections on my system running Armbian 24.5.3, both with Bookworm and Noble bases, which are both using Kernel 6.6.39. This issue becomes particularly frustrating when syncing files with Unison, as the interruptions disrupt the process frequently. To provide some background, I didn't encounter these network issues when I was using the last Focal version, which was running on Kernel 5.x. The current versions of Samba I'm using are 4.17.12-Debian on Bookworm and 4.19.5-Ubuntu on Noble. Unison is at version 2.52.1 on Bookworm and 2.53.3 on Noble. Both systems also have the latest updates for MDADM…

I am using Debian Image (https://www.armbian.com/orange-pi-5-pro/), USB 3.0 is not working, does not have any power, with original distros or (JR Ubuntu) is USB 3.0 working, any idea how to bring it to life? Thank you Linux orangepi5pro 6.1.75-vendor-rk35xx #1 SMP Fri Jul 19 14:49:03 UTC 2024 aarch64 GNU/Linux admin@orangepi5pro:~$ lsusb Bus 004 Device 002: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode) Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 002: ID 1a40…

Hey Everyone, I'm sorry if this has been answered elsewhere. I recently purchased a Radxa Rock 5B+ and I installed the debian bookworm test build provided by radxa on there getting started page. https://docs.radxa.com/en/rock5/rock5b/getting-started/install-os/boot_from_sd_card https://github.com/radxa-build/rock-5b-plus-6_1/releases/download/rsdk-t4/rock-5b-plus-6_1_bookworm_kde_t4.output.img.xz I was mainly intent on using the HDMI with gstreamer using custom resolutions, but found that when using custom resolutions they cannot use the YCrCb pixel format only RGB8. It seems based on the following comment that RGB8 videoconvert hardware …

I install armbian on the sd card, then insert it into firefly ROC-RK3328-CC. At the start, it flashes quickly 2 times, makes a small pause and flashes quickly 2 more times. Before that, it worked correctly, but I decided to reinstall the system and got this problem. I tried to install the system from firefly, as a result, only debian 9 worked, but it also worked with problems (at the first launch it reached the desktop, after rebooting and connecting the keyboard and mouse, it did not go beyond tty).

Hi, I have an Rock64 v2.0 and after update to trunk 24.8.0-trunk.369 to 24.8.0-trunk.399 the OS stop to starting process with this kernel error: U-Boot 2022.07-armbian (Mar 14 2024 - 00:34:55 +0000) Model: Pine64 Rock64 DRAM: 4 GiB PMIC: RK8050 (on=0x40, off=0x00) Core: 229 devices, 25 uclasses, devicetree: separate MMC: mmc@ff500000: 1, mmc@ff520000: 0 Loading Environment from MMC... Card did not respond to voltage select! : -110 *** Warning - No block device, using default environment In: serial@ff130000 Out: serial@ff130000 Err: serial@ff130000 Model: Pine64 Rock64 Net: eth0: ethernet@ff540000 Hit any key to stop autoboot: 0 Card did not…

Hello Each time I try to upgrade to kernel 6.6.39 on a rockpi-4a the system become unbootable: ## Flattened Device Tree blob at 01f00000 Booting using the fdt blob at 0x1f00000 Loading Ramdisk to f01f6000, end f1f0Ad94 ... OK Loading Device Tree tn 00000000f0179000, end 0000 000f01f5fff ... OK Starting kernel ... efi_free_pool: illegal free 0x00000000f0f0d04 efi_free_pool: hllegal free 0x00000000f0f0a040 I have another rockpi-4a but with a rockpi4b image (installed by mistake) I was able to copy the file 6.6.32 from this system to my other one (creating the older symlink on /boot) , and I have be able to boo…

Hello Everyone I have added Armbian for the Heltec HT-M2808 Helium Miner https://github.com/armbian/build/pull/6989#event-13647037453 https://heltec.org/project/ht-m2808/ To Compile ./compile.sh build BOARD=rk3328-heltec BRANCH=current BUILD_DESKTOP=no BUILD_MINIMAL=no EXPERT=no KERNEL_CONFIGURE=yes KERNEL_GIT=shallow RELEASE=bookworm You can obviously decide to go with a desktop environment (board has no HDMI) or use a different release. How to Flash 1) Install Rockchip Flash Tools 2) Download bootloader (rk3328_loader_ddr333_v1.16.250.bin) attached here. 3) Boot device into LOADER mode. Plug USB Cable in to back …

Hi, I'm trying to fully boot an Orange Pi 4 from a USB flash drive from Uboot's prompt before it actually loads the kernel from the SD card (The SD card already has a working image of Armbian installed, that's where the board pulled Uboot from and is booting from it). The SD card currently has Armbian_23.5.1_Orangepi4_jammy_current_6.1.30_gnome_desktop installed on it. The reason why I'm trying to boot the board from USB is that I want to try an image with Orange Pi 4's legacy kernel to be able to take advantage of its vendor Mali blob for performance comparison against the current open source Panfrost driver in mainline kernel. And that I don't ha…

I have installed Armbian_24.5.1_Orangepi5_noble_vendor_6.1.43_gnome-oibaf_desktop.img on orangepi 5 pro. I found that it cannot recognize the m.2 SATA disk. Is there any solution to this? thanks very much.

My Orange Pi 4B has gone to community support. After an overheat with a compilation, the ssd dies, and I reflashed to the new community version Armbian_community_24.8.0-trunk.399_Orangepi4_noble_current_6.6.40_gnome-oibaf_desktop Anyway I got no HDMI output so I left it running, and suddenly I got a new device on the network. Since I am going to use it headless it works well for me. Bug 1 No HDMI Expected HDMI output works Actual Result No HDMI output. Bug 2 The second was when I downloaded llvm compiler normal output from clang compiler: (took the whole day yesterday to compile from source without overheating) clang++…

Hi everyone! I recently bought an Orange Pi 5 Pro and decided to install kernel 6.10 on it, as I wanted to take advantage of the new drivers available in this kernel. I found that the [Orange Pi 5 Pro page on the Armbian website](https://www.armbian.com/orange-pi-5-pro/) offers distributions with kernel 6.1, but not 6.10. After trying to install kernel 6.10 via `armbian-config` on an already installed system, I encountered an issue: the system stopped booting. ### Questions and Requests for Help 1. **Support for Kernel 6.10 on Orange Pi 5 Pro**: - Am I correct in understanding that kernel 6.10 is currently not supported for my board? - Does a…

Hello Armbian Rockchip community, I'm working on getting Armbian based on the 6.1 BSP kernel running on a custom RK3328 board (specifically the MKS SKIPR for a 3D printer). This board is very similar to the libre renegade rk3328-roc-cc - just a few minor GPIO pin changes are required. I want to use the 6.1 BSP kernel because I expect it to have mpp video encoding capabilities. There is an existing repo that has this board working on the 6.7 mainline kernel with a couple of gpio patches. I've made some progress but am running into issues and could use some guidance. So far, I've been able to: Compile and run the basic 6.7 kernel for the MKS SKIPR - fr…

Hi, First of all, kudos to the entire Armbian team! I am fond of SBC Linux systems, and having a single minimalistic distro for all of them is a great initiative. 👏 I am trying to boot Armbian on my Orange Pi 3B without success using the following vendor images: Armbian_community_24.8.0-trunk.369_Orangepi3b_bookworm_vendor_6.1.43_minimal.img Armbian_community_24.8.0-trunk.399_Orangepi3b_bookworm_vendor_6.1.43_minimal.img The following edge images work fine: Armbian_23.11.1_Orangepi3b_bookworm_edge_6.6.2.img Armbian_community_24.8.0-trunk.399_Orangepi3b_bookworm_edge_6.9.9_minimal.img …

Orange Pi 5 Pro 16GB Armbian Ubuntu 24.04 XFCE on NVMe (SD card to boot to NVMe) USB 3.0 is not working anymore after install. Was working on OPi OS Ubuntu 22.04 before as I used it to copy Armbian image to NVMe. Logs shows nothing when connecting / removing cable, boot log has no mention about USB 3.0 and no power delivered. Is there some known setting, e.g. USB in OTG mode or something that can do this?

Hi all, built an image for the nanopi m4v2 today using this command line from the build folder ./compile.sh BOARD=nanopim4v2 BRANCH=current BUILD_DESKTOP=no BUILD_MINIMAL=no KERNEL_CONFIGURE=no RELEASE=jammy the build completed successfuly so I flashed it to an sdcard, the problem is is won't boot, I used my newly found skill ( thanks @Werner ) and connected my UART serial TTL cable. The output is rather verbose so apologies up front - does this mean anything to anyone here. The build is the same as I normally do and it's worked fine until today.

Hi there, I wanted to share with everyone here the final product - a gaming handheld we've designed from scratch in Solidworks. I've been working on this with a fellow Armbian contributor @GinKage for quite some time (probably over a year now... time really does fly) who has helped me learn a lot on the software side, which I wasn't really familiar with before I reached out to him. Despite it's shortcomings, I'm really happy with the v1 build. I hope you guys like it! Open source files can be found here, including CAD files, Armbian build files and more. https://github.com/StonedEdge/Retro-Lite-CM5 Retro Lite CM5: Radxa CM5 Gaming Handh…

Hi, Today i upgrade to 24.5.3 when apt full-upgrade proposed me to upgrade and return of crash 😞 Tuned rk3399-kobol-helios64.dtb L2 hs400 file seen to be update... i copy paste file used with 6.6.32... I replace rk3399-kobol-helios64.dtb.org (with 24.5.3) with my rk3399-kobol-helios64.dtb post in this forum sha256sum: e90ebceb4b2f213818f320dfc61c90e556e0470702afa4117b0302bffc3d2cce rk3399-kobol-helios64.dtb sha256sum: 0eb03b645ab8125a4460d4509df32050188a8bdf2b5065f4321748b4eb6f6b4d rk3399-kobol-helios64.dtb.org It's seem to be not crash now... Keep in touch. UPDATE: i confirm, after update to 24.5.3…

I didn't know where to put this, but there is no forum for Orange Pi 5 Pro?

Hi all, new Rock Pi and as well new armbian user. After reading forum threads on the Rock Pi official forum, it seems possible to get the OS to run around 2W idle. I have installed cpufrequtils without getting any success, still sucks around 4W. Any help to tweak kernel or other activities to get Armbian to get into lower power mode would be appreciated. /Daniel

Hello, I have a problem, when I enter "sudo apt install zfs-dkms" on my Helios64, I get this error message: "Module build for kernel 6.6.36-current-rockchip64 was skipped because the kernel headers for this kernel do not appear to be installed." I also made sure to install the kernel header in armbian-config and also rebooted. When I type "apt list --installed | grep linux-headers", I get this listing: WARNING: apt does not have a stable CLI interface. Use it with caution in scripts. linux-headers-current-rockchip64/bookworm,now 24.5.1 arm64 [installed] omv7 itself is installed and running. …

I have a Dev term a06 and have been having problems with the newer releases based on kernel 6.x. After booting one of these, the display does not have backlight or any text/image displayed. On the last 5.x it boots and works fine. I have not yet tried the HDMI output on the 6.x versions, need to get an adapter, but I'm guessing that the built in display is not discovered. The Dev term does not normally have a serial port, I'd need to solder up an adapter, or I would have looked at it to see if anything was happening. Any suggestions for a very basic Linux user to try? Especially something I can maybe edit after flashing (before first boot). I should be able t…

Built latest image for a Rock 3c based device and am having an issue with ethernet connectivity. Boots fine. Wifi works well and it seems functional other than Eth connectivity. My old DTB (from 4.19) will not boot , using a rock3c DTB instead to get a 90% functional device Showing the following for ethernet dmesg | grep eth [ 0.000000] psci: probing for conduit method from DT. [ 3.199039] rk_gmac-dwmac fe010000.ethernet: IRQ eth_lpi not found [ 3.199576] rk_gmac-dwmac fe010000.ethernet: clock input or output? (output). [ 3.199601] rk_gmac-dwmac fe010000.ethernet: TX delay(0x30). [ 3.199614] rk_gmac-dwmac fe010000.ethernet: RX delay(0x10). [ …

I have had major problems trying to use spidev on the pine RockPro64 SBC running Armbian_24.2.1_Rockpro64_jammy_current_6.6.16_xfce. I have posted these comments on the pine.org forum also. I think there is a problem with the spidev device in Armbian as it never toggles the CS line. When I controlled the CS line from my software, I could communicate, but the received data was wrong. I have no experience with the device tree, but I suspect an isue therein. To bypass the problem I wrote a bitbang routine and it works fine and gives the correct data. See the attached file for my discussion. usingspi.txt

I downloaded the image of nanopi R6s from the official website[https://www.armbian.com/nanopi-r6s/](https://www.armbian.com/nanopi-r6s/), but it failed to start no matter burning to sd card or emmc. I know a lot of people have this problem, like this page [https://forum.armbian.com/topic/27904-armbian-images-for-r6s-r6c/?do=findComment&comment=164029](https://forum.armbian.com/topic/27904-armbian-images-for-r6s-r6c/?do=findComment&comment=164029) This is the log printed by the serial port: ``` DDR V1.12 52218f4949 cym 23/07/06-19:46:50 LPDDR4X, 2112MHz channel[0] BW=16 Col=10 Bk=8 CS0 Row=16 CS1 Row=16 CS=2 Die BW=16 Size=2048MB channel[1] BW=16 Col=10 Bk…

Hi, My PC doesn't recognize my tinkerboard S. Would this be a problem with my tinkerboard or my PC setup? The red led is on when I connect the power cable. A USB-C cable connects the tinkerboard to the PC. However, the PC gives no response when the USB-C cable is plugged in nor do I see anything under device manager indicating a COM port connection. Any feedback would be appreciated. Thank you.

I think i messed up with armbian-config, namely with 'system' sub section. I noticed that lately the only images that boot are armbian with kernel 6.9.x Nothing, i say nothing with a lower kernel number would boot -- even those SD cards that were good last time i tried them. None of orangepi factory images boot. In and out of itself, it is not a problem. Yet. But what if something changes in a future?

Hi all, I would like to boot my nanopim4 v2 from a nvme ssd disk if possible - I tried using armbian-install as mentioned on a thread on here and received the error "partition too small" the disk is a 1Tb and has one partition - any ideas ?

Hello: I am tyring to build the latest version of moonlight-qt (6.0.0). Up until now, I succeded by removing the disable-libdrm and disable-wayland to enable hardware acceleration and use H264, H265 and AV1 all of them through hardware acceleration. However, I get huge decoding times and they are even variable, ranging from 40ms to 300ms depending on what is going on in the streaming. The 4.3.1 version provided by @amazingfate works very good at 4ms decoding time but I would like to test the new AV1 encoder and features from the latest version. What steps should I follow to get it working correctly? Thank you in advance

Hello everyone: I own an Orange Pi 5B 16GB. Today I updated from Armbian 24.2.1 to 24.5.1 stable. This new release includes the 6.1 kernel. When I issue the apt upgrade command I correctly get updated to 24.5.1 version but I am still in kernel 5.10. So, in order to be at kernel 6.1, I use armbian-config. The problem is, after doing this and rebooting, the board no longer boots, I dont' get SSH, anything... Another thing that I updated besides armbian itself where sobre libraries like libv4l or libmpp from @amazingfate, before updating those 6.1 kernel switching worked. Any help in how can I debug (like reading UART port) or solv…

Hello, I have been trying to interface with a MCP2518FD CAN controller using a RockPi 4b and have been encountering some issues. The specifications in which I want the CANbus to operate are as such: Baud: 250kb/s FD: OFF Other details: Oscillator: 40MHz SPI Bus: SPI1 (see below) The RockPi pins that are being used are the following (based on the standard pinout of the RockPi 4B https://wiki.radxa.com/Rock4/hardware/gpio) Pin #19 SPI1_TXD -> MOSI Pin #21 SPI1_RXD -> MISO Pin #23 SPI1_CLK -> SCK Pin #22 GPIO4_D5 -> INT Pin #24 SPI1_CSn -> CS I have tri…

@prahal There are two versions of the bootloader in the repository (edge and current). I just tried the current u-boot from the repository. It works but dmesg outputs seven of the following messages: [ 9.674633] rockchip-i2s ff8a0000.i2s: Could not register PCM This note mentions that such error messages could mean that DMA and sound are missing in the linux kernel, could this be ignored ? P.S.: Those messages are not thrown if the recommended bootloader (linux-u-boot-edge-helios64_22.02.1_arm64) is flashed to emmc.

Hello, I wanted to install Linux on my TV box but I'm having problems First I tried to put an Android rom that said it was stock But it doesn't boot and the system doesn't start, it was in loader mode and after I did that it went into maskrom mode and it doesn't come out, everything I try to do gives me the download boot fail I don't know what to do to get out of this mode and install something, all the loader files don't work and the ones that say they work, the links are down

I've done quite a bit of searching and can't find anyone else reporting this specific issue. As the title says any 6.8 image I try fails to boot. The LED is red for approx 4 seconds, turns green for 2 or 3 seconds, and then turns red again and stays that way no matter how long I wait. There is never any video regardless of which HDMI port I use. I've tried the following images: Armbian_24.8.0-trunk.85_Orangepi5-plus_noble_edge_6.8.12_gnome-oibaf_desktop.img.xz Armbian_24.5.1_Orangepi5-plus_noble_edge_6.8.10_gnome-oibaf_desktop.img.xz Armbian_24.5.1_Orangepi5-plus_noble_edge_6.8.10_xfce_desktop.img.xz Armbian_24.5.1_Orangepi5-plus_bookworm_edge_6.8.10…

Hi, New builds (hosted by armbian AND self compiled) of armbian do not post / boot at all. Completely black screen on hdmi outpout. Ethernet link lights do not light up. It's like there is no bootable media inserted (it definitely is). I have tried many combinations of different kernels and ubuntu versions. None work. Board: nanopc t6 8gb ram They used to work, and archived copies from november 2023 work, booting perfectly. I also compiled one back then which also worked. But now this is not working any more. Does anyone have idea why it no longer posts? Thanks Luke

Hello. I have a Tinkerboard "regular" (without internal memory). My OS is Armbian 23.02.2 Lunar. I tried many times updating to Armbian 23.10 but system always brokes. Previously, I ever can update earlier versions without problems. I post in another topic this problem and finally, a forum member showed me that the problem was that there were no drivers for my internal storage in this version. So, my hope now lies in whether I can upgrade to Armbian 24.5.1. I also want to upgrade because the audio drivers haven't been working for a long time and I've tried a thousand things described in different forums. So, in short, how can I upgrade WITHOUT making a new i…

I have several orange pi 5B running Armbian Bookworm Cinnamon doing various task and they are working quite well. when i want to check up on a system that was booted without a monitor connected at boot time i get no video output on the HDMI. when reboot with the HDMI connected the HDMI outputs video just fine. Are there any settings i can change so the HDMI will output video if a HDMI monitor is connected it boots with no monitor connected

Hi, First of all I am posting in Rockpro64 section because I am not seeing one for Rock64 What I need is like the title says: use OTG USB port as regular USB 2.0 port (so I can connect another device). Currently I need the 2 USB 2.0 ports (USB 3.0 is already being used with a external disk). Is this possible? OS version: Armbian 24.2.1 Jammy - Linux 6.6.16-current-rockchip64 Thanks in advance.

I'm trying to enable i2c3 on my orange pi 5b, according to the user manual, i2c is disabled on the 26 header pins by default, and to enable them, you need to edit the /boot/orangepiEnv.txt file, however, my orange pi doesn't have that file. I tried creating a new file and copying the required instructions, then restarted linux, but it still didn't work. Has anyone encountered a similar issue or does anyone know how to resolve this?

Hi guys, I still have two 21.5-inch tablets here, on which I would like to install Armbian. The mainboard is a Sunchip AD-Z33 V1.1 with an RK3288 on board. The board has 2GB RAM and 8 GB flash memory. However, it also has an LVDS slot to which the touchdisplay is connected. Here you can see the equipment in detail: https://www.embeddedsystemboard.com/sale-11364924-rk3288-industrial-arm-board-multi-function-linux-os-i2c-interface-touch-screen.html Do you think that Armbian runs on it and that the functions are still available? Or maybe an RK3288 ArmbianTV box version could run on this as an alternative?

Configure Orange Pi 5B with Armbian OS so that it displays as a microphone and speaker when connected to a PC via the Type-C port, need to ensure the correct setup of the sound card. When connect Orange Pi 5B to PC via the Type-C port, it should now recognize the Orange Pi as a microphone and speaker. Please provide detail guide and suggest to achieve this setup

Howdy. I m running a Helios64 on Armbian 21.02.1 Buster with Linux 5.10.63-rockchip64. I realise this is somewhat old, but it works for me. I have been using MergerFS to present a big "vritual" storage area on my server: jon@OXYGEN:~$ more /etc/fstab UUID=a79a14c0-3cf4-4fb9-a6c6-838571351371 / ext4 defaults,noatime,nodiratime,commit=600,errors=remount-ro 0 1 tmpfs /tmp tmpfs defaults,nosuid 0 0 # "Disk 2" = /dev/sda3 = 8d360e1c-1908-4d8d-8289-2b1c83604950 UUID=8d360e1c-1908-4d8d-8289-2b1c83604950 /srv/m…

Hello Armbian Team I have one banana pi r2 pro board(https://wiki.banana-pi.org/Banana_Pi_BPI-R2_Pro). I used Armbian_community_24.5.0-trunk.667_Bananapir2pro_bookworm_current_6.6.31_minimal.img(https://github.com/armbian/community/releases/download/24.5.0-trunk.667/Armbian_community_24.5.0-trunk.667_Bananapir2pro_bookworm_current_6.6.31_minimal.img.xz) . I want to use 4 serial port. But when I tried to "cat" command, it gives Input/output error. I tried to screen too but it terminated immediately. it can see there is 7 uart interface ,but only ttyS2 works, for terminal how can I use other uart interfaces. :~# ls -l /dev/ttyS* crw-rw---- 1 root dialout 4, 6…

Hi Team, I hope you're all keeping well. I'm into my first foray into armbian, and I'm having trouble just getting it to boot on my Nanopi R6S. Feeling a bit thick, like I'm missing something obvious. I can get FriendlyELEC's rk3588-sd-debian-bookworm-core-6.1-arm64-20240511 to boot without any trouble, but not armbian images. My procedure: Format microSD card with the SD Card Formatter from the SD Association Burn image to SD card with balena etcher Eject microSD reader from my PC Pop microSD into the device and apply power When it boots into the FriendlyELEC image: the SYS lig…

I have my RK3399-based device booting with my own working kernel and device tree. I want to erase the root partition and install Debian from one of the official ARM distros, but I'm not sure how to do this. Obviously, I can't just boot into the Debian installer like on an X86 machine. What I think I need is a root partition of a vanilla Debian install, because then I can just point U-boot to the root partition and Debian should boot (hopefully into an installer). What's the best way to proceed?

Hi team, This is not exactly Armbian related, however I hope to find some help here, also it can be useful for someone else in custom board development (my case). For testing I have Olimex RK3328-SOM-EVB and RK3318 TV box boards. They both behave the same way. As summary I'm trying to boot Linux using the Bootrom and USB OTG only, in other words without any external boot NVM attached. To archive this I build U-Boot SPL (u-boot-spl.bin), which support SDP protocol via USB OTG. For SDP file transfer I'm using imx_usb tool. The binaries used in the process are: rk3328_uboot_v1.19.250.bin - consists of u-boot-tpl.bi…

[ 11.309397] panfrost ff9a0000.gpu: clock rate = 500000000 [ 11.316882] panfrost ff9a0000.gpu: EM: OPP:200000 is inefficient [ 11.317248] panfrost ff9a0000.gpu: EM: created perf domain [ 11.320588] panfrost ff9a0000.gpu: mali-t860 id 0x860 major 0x2 minor 0x0 status 0x0 [ 11.321594] panfrost ff9a0000.gpu: features: 00000000,00000407, issues: 00000000,24040400 [ 11.322812] panfrost ff9a0000.gpu: Features: L2:0x07120206 Shader:0x00000000 Tiler:0x00000809 Mem:0x1 MMU:0x00002830 AS:0xff JS:0x7 [ 11.324483] panfrost ff9a0000.gpu: shader_present=0xf l2_present=0x1 [ 11.357056] [drm] Initialized panfrost 1.2.0 20180908 for ff9a0000.gpu on minor 1 It seems Panf…

Hi, In a bid to solve an issue with my NAS (which I now think was a dying HDD) I foolishly decided to upgrade from buster to bullseye and now most, if not all, of the services are failing to start - including network-manager, sshd and fancontrol so I only have access via the USB serial console. By setting a static IP I have been able to get it network access at least. When I try to start any of the dead services it hangs for a minute or so, then kicks me back to the login and the terminal is corrupted so I need to reboot before I'm able to do anything meaningful. (I am able to start fancontrol by just running `fancontrol` at which point the fans stop going at 100%, s…

Bigtreetech CB2 and Pi 2 released somewhat recently (April 20th). They use RK3566 and have a lot of nice features. The board and module are intended for 3d printer use but can be used just like any other pi. There is an official linux image on bigtreetech github, and it seems it's a slightly customized armbian. I propose copying that configuration and adding it as a supported board. This is a bit of a personal tangent, but I was also thinking of how I can submit the device tree files to the mainline linux kernel, would that be a good idea? I'm planning to use or at least try Alpine on the board and it would be nice to have the needed files in the linux package…

Hello, I need your expert help to resolve an issue on my newly purchased orange pi 5b. I was able to install armbian xfce desktop os on emmc but am unable to correctly run a purchased csi mipi camera module (OV13850). Attached are some screen grabs, I do see rk3588-ov13850-c1 appear in overlays row of armbianEnv.txt upon toggling the selection in the armbian-config. Cheese application shows message "There was an error playing video from the webcam" upon opening the application (i also installed flatpak cheese as per some comment in a forum to test). I also tested connecting camera on rk3588-ov13850-c3 but face the same issue. Is th…

I burned the .img file via RkDevTool to eMMC according to the manual, however when I try to upload I get the following error: "Gave up waiting for root file system device. Common problems: - Boot args (cat /proc/cmdline) - Check rootdelay= (did the system wait long enough?) - Missing modules (cat /proc/modules; ls /dev) ALERT! UUID=cff1be9d-0892... does not exist. Dropping to a shell!" blkid says: /dev/mmcblk1p1: PARTUUID="d0bc2961-01" fsck /dev/mmcblk1p1 says: error 2: no such file or directory cat /proc/cmdline says: root=cff1be9d-0892... rootwait rootfstype=ext4 splash plymouth.ignore-se…

Hello all I have broken my installation when I tried to install the kernel 6.1 my current kernel 5.10.160-legacy-rk35xx. My nanopc t6 do not start. My installation is on EMMC and start on it. Could you please help me to recover it ? I have a backup file from OMV but I don't know how to push the backup to the EMMC? other possibility I guess copy the boot folder backup to EMMC boot folder but I do not know if it is enough. I really appreciate an help furthermore a clear turial could help evryone to recover an installation on EMMC memory. Thanks in advance for your support.

I have a Helios64 that I recently reinstalled/updated to the latest Armbain Jammy image after not updating for quite some time and finding some of the repos to be dead. Without the drives initialized the system seems like it will run for days, but with the drives initialized (ZFS), I will get the below error after a few hours of uptime (~8-10 hours). I have seen some threads saying to set the CPU clock to one speed to fix the issue and some people installing a newer kernel (via beta.armbian.com). If anyone has any thoughts on how I could try and make this more stable I would appreciate it. [477435.475903] rcu: INFO: rcu_preempt self-detected stall on CPU [477…

Hello, https://doc.embedfire.com/products/link/en/latest/linux/ebf_lubancat.html I tried to port the kernel device tree in the SDK provided to the mainline kernel, but it ultimately failed to start I'm not sure what the difference is between the device tree in the mainline kernel and the rk custom kernel Please help me.

Libre Renegade overlays opp-1.4ghz and opp-1.5ghz load but not working in trixie edge (24.5.0-trunk.512). Both overlays do work in 24.2.1 bookworm.

Hello team Hoping I can get some advice here We have a custom device running rockchip3588 It boot up into android 12 This device has no SD card option We installed RKdevtool on a laptop connected to the back of the device via usb C installed Ubuntu 20.04 desktop using firefly by partitioning the free space We simply dragged and dropped the image over to the space using firefly However it failed with no free space to even run a standard update We are trying to wipe it out and install Ambian directly onto it removing android We should then have enough space not having to boot up with android Does anyone have a…

hello, i was trying to set up a 2 pin fan on my orangepi 5b and i connected it to pin 25 and 26 (GND and PWM1). When i first started this task, the output from gpio readall would show me all 26 pins on the board. As i was digging through some forums to try and get the PWM pin to operate as on/off, i came across wiringOP and when i installed it, the output of `gpio readall` changed to only show 8pins. I am unsure of what went wrong and why it only shows 8 pins. I tried removing wiringOP and it still has not made a difference. Thanks

I am having this problem with apt-get update, please if someone could help me, maybe we have to change the repositories

I apologize in advance if I wrote to the wrong branch. Dear community, a question about OrangePi 5B (board without SPI-flash!). There is only an eMMC on the device. The computer is successfully running on the OS from the Orangepi website, recorded both on the SD card (Baleno Ether) and with eMMC (MaskROM+RKdevtool). At the same time, I see the devices themselves and their partitions, SD card and/or eMMC. The Armbian OS for OrangePi 5/5B/5 Plus (CLI or GUI) written to the SD card loads and works, BUT disk commands DO NOT SEE eMMC, only SD card partitions. In Armbian-config, there is only the Insatall/Update bootloader on SD/eMMC item, which does not change anything. If …

When I reboot with kernel 6.8.4 (edge) installed by apt upgrade, I noticed my scripts that uses snapper for remove differential backups. It turns out that, if no cleanup algorithm option is used, snapshot is created. Before the reboot, with kernel 6.8.1 version, there was no issue. I on Armbian Bookworm, but also with other Debian Bookworm based OS running those same kernel binaries. Same failure with 6.8.5 Currently I don't know any more, I could run this faulty kernel in a VM as the .config is such that it also boots on virt hardware (virt-7.2 as Bookworm uses). EDIT: Also in a VM, the problem is there: root@armbian64:/tmp# sn…

I upgraded from my own-compiled Armbian kernel 6.8.0-rc5 to 6.8.4 and there are now very annoying stall when for example I drag a KDE Konsole window. Also when I play a 1080p50 HEVC video, as son as a move the mouse, the whole video stalls. Besides 6.8.0-rc5, the normal apt provide 6.8.1-edge-rockchip-rk3588 also works OK. 6.8.5 has the same issue as 6.8.4. As indicated, I use KDE, X11, compositor disabled. Enabled makes no difference. OS base is Armbian Bookworm, but I have also used kernels 6.8.1 and 6.8.4 with a rootfs copied from an RaspberryPiOS and Opensuse-Tumbleweed. RPiOs is also Debian Bookworm, Tumbleweed is latest, KDE6. So it is not KD…

Since the specific USB hardware support is now in place, I thought it would be good to discuss pitfalls and remedies for transitioning to a modern kernel. I have now tested the 6.8.5 based Armbian. None of the latest packages (.408 - .411) come up with HDMI output. You have to have a serial console connected, and then correct the problems. 1) This is what you are greeted with: [ 6.828040] panthor fb000000.gpu: [drm] *ERROR* Failed to load firmware image 'mali_csffw.bin' To fix this do apt install armbian-firmware-full and reboot 2) The 8821cu driver has performance problems. Also, the stupid "windows" adapter comes up …

Dear maintainers, thank you very much for your fantastic job! I di know how difficult to support different Chinese dev. motherboards. But I would like to ask you for a help: I use TinkerBoard S Rel.2.0 with latest armbian available for the board. It works perfect with HDMI 7inch screen from BigTreeTech company (BTT). However, I would like to use it with BTT 4.3inch DSI Display, which is developed for Raspberry Pi. BTT provided a 43DPI driver guidance for Raspbian which is here: bigtreetech/TFT43-DIP: DPI Driver, but it might work for kernel > 4.5 or 5.x. Moreover, in your distro there is no config.txt but there is the armbianEnv.txt. So, it is obvious,…

I've got an OrangePi based on the Rockchip RK3399. The official OrangePi Debian version I'm using is Armbian-based I believe and uses a 5.10 kernel. I want to upgrade the kernel as later ones support some video features of the RK3399 I want to use. The problem is, if I build the kernel using the standard vanilla method from kernel.org sources even using the same config file from the running kernel without changing anything (make olddefconfig), the device won't boot when I symlink the new kernel to /boot/Image. Interestingly, it does boot if I symlink the new initrd to /boot/uInitrd, but only with the old kernel. Is there something special I need to do to the k…

Hi Community, i was upgrading from kernel 5.10.160 to the new 6.8.2-edge for Rock Pi 5b / rk3588. Now i missing many DTB overlays 😞 which where aviable in 5.10.160 I need UART3_M1, UART7_M1 What is with Kernel 6.8.2 the right way to export GPIOs and set there direction ? This does not work longer cd /sys/class/gpio echo 157 > export Thanks a lot for your help 🙂

Hi all, I try to use a SATA/SSD connected via USB instead of a SD Card or eMMC, but it doesnt boot at all. I tried to use U-Boot for Rock64 on SPI: Release 2017.09-rockchip-ayufan-1065-g95f6152134 · ayufan-rock64/linux-u-boot · GitHub (flashed to SD Card and successfully booted on Rock64), but without success. I flashed the same Image to SD Card, eMMC and SSD. Booting from SD Card and eMMC works without problems, SSD is visible from Rock64, correct UUID is written in "armbianEnv.txt" on SSD. But nevertheless - it doesn´t boot. I use the Rock64 for my Home Automation and want to use the SSD because it should be more …

When comparing network speeds on the orange pi 3b 8gb model using armbian (Jammy Gnome 6.8.2) and Opios (aarch64-xfce-opi3b-23.08.1-linux5.10.160), there seems to be an issue with uploads on armbian. Using iperf3 for testing, the results were as follows: For orange pi os (arch): From other device (server) to orange pi 3b (client): 112mb/s From orange pi 3b (server) to other device (client): 112mb/s For armbian: From other device (server) to orange pi 3b (client): 112mb/s From orange pi 3b (server) to other device (client): 42mb/s I would like to know the cause of this problem and how to solve it.

Hello, I have been trying to switch to kernel 6.8 but images are not working properly. Screen does not show anything at all. 6.1 images can boot so users can proceed with installation. Failure has been observed for some time starting with earlier 6.8-rc versions. Has anyone tried any 6.6 build?

Hi, is is possible to port the kahdas-edge2 changes (https://github.com/armbian/build/pull/6335) to the OrangePi 5b device tree?

Dear all I have a nanopc T6 with kernel 5.10.160 bullseye and omv 6 EMC 256gb avec NVME I would like to pass on omv 7 with bookworm. I found this command which change all automatically and keep the configuration. "omv-release-upgrade" Could you please confirm that this command could be used with armbian or an other metod exist ? Thanks in advance for your support.

Hello I have installed Armbian 24.2.3 Bookworm with Linux 5.10.160-legacy-rk35xx on Orange Pi 5 plus with 32 Gb ram and mounted a heatsink with a fan on the CPU (this model: http://www.orangepi.org/html/hardWare/computerAndMicrocontrollers/details/Cooling-Fan.html) I need help configuring the fan to turn on when the CPU temperature reaches 60°C and turn off when it reaches 50°C. Can you provide instructions on how to do this? Thanks for help or support

Hi. I testing out different images for my DIY NAS project. My plan is to use the Orangepi3b board with armbian bookworm and OMV. I have built images from armbian github, (main,trunk) the edge 6.7.10 kernel is working great. But I do get some Iperf3 retries when sending from Opi3b. From Opi3b 60-70MB/s To Opi3b 110MB/s. With Orangepi own bookworm image I have 110/110 and no retries. The same with Joshua Riek's Ubuntu server image, no retries and 110/110. Orangepi3b armbian with 6.7.10 kernel orangepi@orangepi3b:~$ iperf3 -c 192.168.10.197 -f M Connecting to host 192.168.10.197, port 5201 [ 5] local 192.168.10.155 port 56514 connected to 192.…

It seems like the Radxa Rock5B has been downgraded from standard support to community support for the image downloads but not (yet) for the forum. Are the vendor images for the RK3588 and the 6.8.x images the same except for the kernel? (Can I expect to just replace the kernel to switch from the vendor image to the edge image.)

Hi all, I have several NanopiM4 SBC's, some are Nanopim4 and others Nanopim4v2. I use the Nanopim4v2 image on all of them and it works beautifully. When I ssh into the boxes I see which doesn't look great on here but it's basically NPIM4V2, I would like to change it to NPIM4 for the non M4V2 boards - anyone know how this is generated ? I don't even know what to call it ! Splash screen ? Logo ? Hope this makes sense

Hi friends... I understand that you have to be careful with the power supply and SD cards. For the above, I bought 2 power supplies (original) and several SD cards from different suppliers. After several attempts I can't get it to start from the sdcard (it only starts from the nvme). I burned the images on Linux (wipefs + dd + gparted) and Windows (SD Memory Card Formatter + balenaEtcher). Also, I used RKDevTool to burn the images to the sd card and nothing (evidently I deleted the spi content). --- begin part of the log --- U-Boot SPL board init U-Boot SPL 2017.09-gc060f28d70-220414 #zyf (Apr 18 2022 - 18:13:34) Failed to set cpub01 Faile…

Hello, I'm currently having trouble getting Kodi to run smoothly on my RADXA RockPi 5B. Despite having set up Kodi multiple times before, I'm facing some challenges this time around. Here's what I've done so far: Installed the Armbian_community_24.5.0-trunk.168_Rock-5b_jammy_vendor_6.1.43_gnome_desktop.img.xz image onto a micro SD card for my RockPi 5B. Followed the instructions provided on the Armbian website for the RockPi 5B (https://www.armbian.com/rock-5b/). While Armbian boots up fine and I can start Kodi, I encounter a few issues: - The screen resolution is initially incorrect when Kodi starts up. To fix this, I have to navi…

I have been using a Rock Pi 4C Plus (v1.2) with M.2 slot with Armbian for some time. I boot from eMMC, but have a 500GB NVME device Cannot recall the original version of firmware installed, but it was originally a Debian bullseye image and I re-installed when a bookworm image became available. I regularly use "apt update" followed by "apt upgrade" to keep the software up to date. After a recent update the system went into a boot loop. I attempted to recover by creating an SD card with the latest Armbian image. When trying to debug the issue I noticed that the NVME in the M.2 slot is no longer recognized. Reverting to previously available 23.11 image and the NVME …

Now the mainline u-boot has decent pcie and pcie phy driver for rk3399. The only deficiency is the clock of pcie phy not included. The first attached patch add this clock so that u-boot proper can load linux kernel residing in an ext4 partition of nvme ssd.pcie_phy_clk.patch The second patch enables loading the environment from a file in an ext4 partition of nvme ssd.env_nvme.patch More conveniently the u-boot proper(u-boot.itb) could be an ordinary file residing in an ext4 partition of nvme ssd. The idbloader(tpl/spl in spi/emmc/sdcard) could load it if pcie nvme support is enabled in spl. That's the third attachment.spl_nvme.patch Th…

Hello, I apologize for my bad English. I have a NanoPi R6S and a NanoPC T6. Both Nano devices have Armbian images. Both devices use a processor: CPU Model: Rockchip RK3588 Number of Cores: Quad-core ARM Cortex-A76 + Quad Core Cortex-A55 Frequency: Cortex-A76 (up to 2.4GHz), Cortex-A55 (up to 1.8GHz) A few things struck me On NanoPi R6S in the dts file, the frequency of A76 cores is up to 2.4GHz you can see the frequencies at which each core works cat /sys/devices/system/cpu/cpu*/cpufreq/scaling_available_frequencies 408000 600000 816000 1008000 1200000 1416000 1608000 1800000 408000 600000 816000 1008000 1200000 1416000 1608000 1800000…

Hi All, in an attempt speed up my Armbian image build process I put the last build choices in a bash script ./compile.sh BOARD=nanopim4v2 BRANCH=current BUILD_DESKTOP=yes BUILD_MINIMAL=no\ DESKTOP_APPGROUPS_SELECTED='browsers editors'\ DESKTOP_ENVIRONMENT=gnome\ DESKTOP_ENVIRONMENT_CONFIG_NAME=config_base\ KERNEL_CONFIGURE=no RELEASE=jammy but I still get prompted for input when I run the script - what am I doing wrong ?

Just to let people know that the NanoPiM4V2 build works on both NanoPiM4 and NanoPiM4V2 boards

Having successfuly built and installed an Armbian image I would like to configure the WiFi connection as part of the process. Currently on first boot I have to connect a network cable to the SBC and run armbian-config to configure the WiFi manually which is a bit of a drag when I'm updating 5 boards. Is this doable ?

I tried for hours last night and I couldn't get a single emulator to work, and most of them simply don't exist for this version of Debian Has anyone had any luck and with what OS

Hi all, I'm following a tutorial by @NicoD on building an Armbian image, the problem I have, is, my board ( NanoPiM4V2 ) isn't shown in the picklist - I 've tried one of the many RK3399 offerings ( Rockchip64 ) but whilst it built ok it didn't boot, anyone here know which board I should use ? Edit I found if you pass EXPERT=yes as a parameter to the install script the board is listed - I'm building it now and will post back the result End edit

Hi, after upgrading linux-u-boot-rock-3a-current, linux-image-current-rockchip64 and linux-dtb-current-rockchip64 to the 24.2.1 versions, the system losses the network producing kernel errors in dmesg: [ 432.408850] rk_gmac-dwmac fe010000.ethernet: IRQ eth_lpi not found [ 432.410880] rk_gmac-dwmac fe010000.ethernet: clock input or output? (input). [ 432.410929] rk_gmac-dwmac fe010000.ethernet: Can not read property: tx_delay. [ 432.410954] rk_gmac-dwmac fe010000.ethernet: set tx_delay to 0x30 [ 432.410983] rk_gmac-dwmac fe010000.ethernet: Can not read property: rx_delay. [ 432.411002] rk_gmac-dwmac fe010000.ethernet: set rx_delay to 0x10 [ 432…

If you want to build out-of-tree kernel modules, you will need: kernel headers (installed with apt) kernel sources in /usr/src (cloned from git) kernel config (from /proc/config.gz) some preparation of the sources (but you can avoid building it 😉) # Install kernel headers apt install -y linux-headers-legacy-rk35xx # Install kernel source cd /usr/src git clone https://github.com/armbian/linux-rockchip.git ln -nsf linux-rockchip linux-5.10.160-legacy-rk35xx cd linux-rockchip git checkout rk-5.10-rkr6 # Prepare kernel source zcat /proc/config.gz >.config yes | make olddefconfig make prepare modules_prepare cp /usr/src/linux-headers-$…

Hey, I am working with Weston-7 alongside Lima driver with MESA v19 to render using MALI450 on the display but it isn't rendering it properly. I thought the issue is with MESA so I upgraded it to v20 and applied required patches for Weston-7, but still the result is same and there is no improvement. I have attached the video link below of Weston terminal on the display for reference. Weston render Any idea what I might be missing here?

The most resent build 24.5.0-trunk.93 does not have comedi drivers included. I tried to build them with the armbian build system, but it is exclude there. How I can change that so that I can include these drivers. I have a bunch of data aquisition system relying on this drivers that I ran with a rockpi 4c+ Any hint appreciate, Thomas

Hello, I would like to install Mali-G610 drivers on my Rock5B, but getting error during adding PPA: root@rock-5b:~# add-apt-repository ppa:liujianfeng1994/panfork-mesa PPA publishes dbgsym, you may need to include 'main/debug' component Repository: 'deb https://ppa.launchpadcontent.net/liujianfeng1994/panfork-mesa/ubuntu/ bookworm main' Description: https://gitlab.com/panfork/mesa You need to install mali-g610-firmware if you don't have file /lib/firmware/mali_csffw.bin More info: https://launchpad.net/~liujianfeng1994/+archive/ubuntu/panfork-mesa Adding repository. Press [ENTER] to continue or Ctrl-c to cancel. Adding deb entry to /etc/apt/sources.l…

As the title states - I've been away for a while and can't remember where I should post 🙄

At least for legacy kernels, it possible to use Radxa's overlay for the 25W PoE hat. This should allow you to use the PWM fan on the PoE hat. #!/bin/bash # Install linux headers apt-get install -y linux-headers-legacy-rk35xx # Download and compile the device tree overlay h=/usr/src/linux-headers-$(uname -r) wget https://raw.githubusercontent.com/radxa/overlays/f2679399887b678dec62cb50cb44c767a2bcb293/arch/arm64/boot/dts/rockchip/overlays/rock-5b-radxa-25w-poe.dts cpp -nostdinc -I $h/include -I $h/arch -undef -x assembler-with-cpp rock-5b-radxa-25w-poe.dts | dtc -I dts -O dtb -o rock-5b-radxa-25w-poe.dtbo # Install device tree overlay mkdir -p /…

I have managed to install mainline u-boot on my 5B. i copied the 5It boots from both MMC and the SD. To boot from the sd, you have to interrupt the boot process and tell it to boot from MMC0. the default boot order is: mmc1 mmc0 nvme scsi usb pxe dhcp spi I've tried a number of things to correct the issue but none worked. In the aliases section of rk3588s-orangepi-5b.dts, I had to device sdchi as MMC0 (it really is MMC1). Not it boots like it should. Is there a better way to get u-boot to boot from SD card first? Thanks!

I tried to install OMV 7 RC1 on the Bookworm image, but I get a lot of "Segmentation fault" and "free(): invalid pointer" error messages. My Installation for the Bookworm image... Is the problem due to the Bookworm image or the 6.6.8 kernel or should I contact the OMV team? Here is the complete log of the OMV 7 RC1 installation... Spoiler root@helios64:~# sudo curl -sSL https://github.com/OpenMediaVault-Plugin-Developers/installScript/raw/master/install | sudo bash [2024-02-22 13:32:50+0100] [omvinstall] script version :: 2.3.9 [2024-02-22 13:32:50+0100] [omvinstall] Armbian [2024-02-22 13:32:50+0100] [omvinstall] Starti…

Are there any plans to make a version with the new Rockchip 6.1 kernel available for Orange Pi 5/5+? Joshua Riek seems to have had some success, he even got the Panfork drivers running. I run a headless server though so even without graphics it would be interesting but I use Debian.

Hello, I've problem... Message from syslogd@rock-5b at Feb 23 21:58:00 ... kernel:[ 443.674152] Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP Message from syslogd@rock-5b at Feb 23 21:58:00 ... kernel:[ 443.674152] Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP Message from syslogd@rock-5b at Feb 23 21:58:00 ... kernel:[ 443.718480] Code: b40001b3 f1036273 d503201f 54000140 (f9402261) Message from syslogd@rock-5b at Feb 23 21:58:00 ... kernel:[ 443.718480] Code: b40001b3 f1036273 d503201f 54000140 (f9402261) I have exactly zero experience with debugging this. But from my trial-error it will have something to do…