Rockchip

Rk3588 boards now share the same linuxfamily as rk3568 and rk3566 boards. It means rockchip-rk3588 kernel won't get update longer. Here is some steps for migration: sudo sed -i 's/LINUXFAMILY=rockchip-rk3588/LINUXFAMILY=rk35xx/g' /etc/armbian-release sudo apt update sudo apt install linux-image-legacy-rk35xx linux-dtb-legacy-rk35xx linux-headers-legacy-rk35xx sudo apt remove linux-image-legacy-rockchip-rk3588 linux-dtb-legacy-rockchip-rk3588 linux-headers-legacy-rockchip-rk3588 NOTE: The steps are currently for beta branch only. Don't try on stable branch.

• 1

  Reputation Points

• 15 replies
• 36.7k views
• 2 followers

haajee

October 13, 20241 yr

My current setup is the tinkerboard powered by the raspberry pi universal adapter connected to ethernet and a external HDD(Maxtor M3) powered by the Tinkerboard's usb. I have used it very lightly in this configuration (ssh-ing into it and copying some files to the hdd) but from what I have gathered from the information available here this powering setup is inedequate and will lead to problems. So I want to follow the recommended method and power it through the GPIO pins. I am considering using this or this powersupply. (I realize 10A on the second one is overkill for the tinkerboard, but the price difference from the 3A rated one is minimal and I could find some othe…

• 0

  Reputation Points

• 37 replies
• 58.2k views
• 2 followers

berin

January 18, 20233 yr

I have recently accepted the 23.11.1 armbain kernel release on my RockPro 64 The update has not rebuilt or updated the uIntrd for the 6.1.63 kernel. Note that the /boot/uInitrd symlink still points to the old uInitrd version but the other two symlinks have updated. root@jupiter:~# ls -l /boot/dtb /boot/Image /boot/uInitrd lrwxrwxrwx 1 root root 29 Dec 2 20:38 /boot/dtb -> dtb-6.1.63-current-rockchip64 lrwxrwxrwx 1 root root 33 Dec 2 20:38 /boot/Image -> vmlinuz-6.1.63-current-rockchip64 lrwxrwxrwx 1 root root 33 Nov 30 18:04 /boot/uInitrd -> uInitrd-6.1.50-current-rockchip64 root@jupiter:~# ls -l /boot/uInitrd* lrwxrwxrwx 1 root root …

• 0

  Reputation Points

• 4 replies
• 4.9k views
• 1 follower

David Pottage

December 4, 20232 yr

I installed Desktop images with Armbian Linux v6.1 Ubuntu 24.04 (Noble) Gnome (Zero 3W) And out of the box after installation I get the message -bash: fork: retry: Resource temporarily unavailable (I have to work through the com port, because because of this error ssh and the desktop cannot work) I checked the performance of the equipment by installing Debian 11 from Radxa, the equipment works correctly (CPU RAM eMMC). Has anyone encountered this problem?

• 0

  Reputation Points

• 2 replies
• 2.8k views

Lukas Veitas

November 29, 20241 yr

Hi, On the download page of Tinker board "Ethernet driver needs some fixing" is listed as known issue. Are there any details about? What is the problem with the ethernet? Who should fix it? (Asus, armbian) Are there any plans for fixing it? I'm asking it, because I would like to use my tinker board as a headless 24/7 home cloud. Thank you!

• 1

  Reputation Points

• 9 replies
• 8k views
• 1 follower

stefan.steffens

February 20, 20188 yr

Board : radxa rock 5c lite with NVMe HAT and SPI Flash Module. OS : Armbian 25.11.2 stable 6.1.115-vendor-rk35xx (Debian trixie) Overlays : rock-5a-spi-nor-flash SPI Flash is on /dev/mtdblock0 Boot from SD : OK Boot from SD system on NVMe : OK ---- I want to boot from Flash, so I tried `Install/Update the bootloader on MTD Flash` menu on `armbian-config'. Then I got this message. No SPI image found. I also updated SPI with `rsetup` from Radxa OS, but it does not work(boot from NVMe failed) either. What do I have to do?

• 1

  Reputation Points

• 10 replies
• 4.2k views
• 1 follower

slmq

April 30Apr 30

On my Odroid M1 I have a display that will not work, other displays do work. Unfortunately, I need this display to work. When I plug it in, I see "PHY PLL not locked" in dmesg. If I boot with it plugged in, I see the Hard Kernel logo, then the screen turns off as Armbian boots. I booted into the Ubuntu 20.04 Gnome image provided by HardKernel and that one works. 1. What could I change to allow this display to be detected? 2. Can I just force the board to boot with output to 1024x768@60. I just need the output. Thanks all.

• 0

  Reputation Points

• 0 replies
• 2.2k views
• 1 follower

JohnCHarris

May 12, 20233 yr

I have 23.8.1 Jammy installed with kernel 5.10.160 and I'm getting plenty of kernel errors during any video playback, and these also cause the playback to freeze. From my research, these error messages come from librga - which I assume come from the panfork and rockchip repos but I was wondering if anyone has been able to resolve these errors.

• 0

  Reputation Points

• 0 replies
• 3k views

OttawaHacker

September 22, 20233 yr

Hi all, Since most of Armbian's Rock 5B images are currently bricked (although hopefully not for too much longer now that we've figured out what the root cause is) I've been using the Ubuntu 26.04 image, which works, but doesn't have hardware video decoding and encoding. Since I wanted to use it with RDP, I needed hardware video encoding at least to make things not super-slow, so I figured, why not port it myself with Claude and Codex. So that's what I did. The kernel and some of the auxillary stuff like ffmpeg, librga, mpp, a mpp -> vaapi bridge, and a gnome-remote-desktop build that encodes using ffmpeg, are all in a PPA. Details here: https://github.com/…

• 0

  Reputation Points

• 1 reply
• 902 views
• 1 follower

Boardcon_yang

August 18Aug 18

I just installed with the latest KDE image, but I'm able to reproduce this with any of the images available. After going through the initial configuration, wifi works great. I updated apt and upgraded everything. Then I installed the armbian-firmware-full package. After rebooting wifi still works. Then I setup Bluetooth for my mouse and keyboard. They work correctly. After rebooting I no longer see any networks to connect to for wifi. If I disable Bluetooth and reboot wifi works again and so does Bluetooth. Is this an issue of daemons or drivers loading in the wrong order?

• 0

  Reputation Points

• 0 replies
• 1.6k views
• 1 follower

oorrwullie

March 6, 20242 yr

I'm booting it from Armbian_24.11.1_Rock-5c_bookworm_vendor_6.1.75_minimal.img.xz image from a SD card. When launching `armbian-install`, there's only one option: (5) - Install to SD card I would like to install the bootloader to the SPI flash module but the option is not present. Furthermore it seems that my SPI module isn't detected either when running ls /dev/mtd* -> no mtdblock I decided to move on and I flashed https://dl.radxa.com/rock5/5c/images/loader/spi/rock-5c-spi-image-20240528.img to my 5C lite SPI flash module. However, there's no display and both LEDs are lighted up (green and blue) without blinki…

• 0

  Reputation Points

• 0 replies
• 2.4k views

peltho

January 10, 20251 yr

Hello, i'm using Armbian 23.11 Jammy-amazingfated Gnome. Kernel 5.10 If to seek a couple of times in h264 1080p BD remux'es it will cause system restart. Any video players are affected. Tried mpv, vlc, kodi and others. Problem affect just h264 1080p remuxes, that typically are 30..40 Gb, smaller h264 or even larger h265 files seem to work fine. I tried fresh install of armbian, where no rkmpp is installed, then h264 files plays/seeks fine, in software mode of course. Once I did sudo update/upgrade, that also installs rkmpp and other rockchip stuff, then videos start to play with rkmpp and problem is back. I've tried disabling hw deco…

• 0

  Reputation Points

• 4 replies
• 2.8k views

noba

March 13, 20242 yr

The problem persist on both Armbian 23.8 bullseye and Armbian 23.11.0-trunk.107 Bullseye After change it via armbian-config It stays the default cpufreq-info cpufrequtils 008: cpufreq-info (C) Dominik Brodowski 2004-2009 Report errors and bugs to cpufreq@vger.kernel.org, please. analyzing CPU 0: driver: cpufreq-dt CPUs which run at the same hardware frequency: 0 1 2 3 CPUs which need to have their frequency coordinated by software: 0 1 2 3 maximum transition latency: 149 us. hardware limits: 408 MHz - 1.99 GHz available frequency steps: 408 MHz, 600 MHz, 816 MHz, 1.10 GHz, 1.42 GHz, 1.61 GHz, 1.80 GH…

• 0

  Reputation Points

• 2 replies
• 5.5k views

j0ta

September 28, 20233 yr

THE MEDIA SCRIPT IS DEPRECATED, IN FAVOR OF THE LEGACY MULTIMEDIA INTEGRATION. PLEASE REFER TO THIS TOPIC: So finally we have the first version of: The UN-official, UN-supported, etc... RK3399 MEDIA TESTING SCRIPT This is the first release of the RK3399 media testing script. The script provides a functionality similar to its RK3288 equivalent: Installing all the libraries and system configurations necessary for GPU accelerated X desktop, Chromium WebGL, full VPU video play acceleration up to 4k@60 10-bit HEVC (the maximum supported by the SoC), and GLES 3.2 / OpenCL 1.2 support. Three video players supporting full VPU accel…

• 1

  Reputation Points

• 118 replies
• 134.1k views
• 13 followers

JMCC

December 17, 20205 yr

I originally posted this on reddit after seeing a lot of posts trying to use a SATA M.2 SSD and saying it wouldn't boot with replies telling them to go buy a NVME M.2 SSD which isn't necessary when the board does support SATA M.2 with flashing the correct bootloader. This guide has 3 different sections, 1 being booting with Orange pi OS and 2 being with Armbian OS Orange Pi OS Instructions Download Orange Pi OS Ubuntu or Debian from their website http://www.orangepi.org/html/hardWare/computerAndMicrocontrollers/service-and-support/Orange-pi-5.html unzip the 7z file to get the .img file and flash it to your sd card with your preferred flasher i.e balenaetc…

• 1

  Reputation Points

• 14 replies
• 51.9k views
• 1 follower

dionisisl_

February 21Feb 21

This guide is specifically for the official orange pi 5 PCIe WiFi 6.0 Module that can be found here although it has been in and out of stock https://a.co/d/bhjoolW It uses the ap6275p chip. The guide will be split into 2 sections depending on what OS you want to use Orange Pi OS 1. install the wifi module into the m.2 slot and boot sd card with either the latest orange pi os ubuntu or debian http://www.orangepi.org/html/hardWare/computerAndMicrocontrollers/service-and-support/Orange-pi-5.html 2. edit the boot file to enable wifi by adding overlays=wifi-ap6275p to the end. Note if you already have overlays=<anything> line such as ssd-sa…

• 0

  Reputation Points

• 3 replies
• 26.2k views

adogecheems

June 8, 20251 yr

Kodi on Orange Pi 5 with GPU Hardware Acceleration and HDMI Audio Huge thanks to user @roykon the Armbian forums for the directions on this in their various forum posts and Armbian forum user @amazingfate for maintaining the PPAs and software builds required for GPU acceleration. I have simply listed below, for the reference of others, the minimum Steps used to get Kodi running with GPU hardware acceleration (for x264/x265 decode) plus HDR auto switching and with HDMI Audio output*. (I am using the Orange Pi 5 with a Samsung 4K TV) *No instructions added yet for enabling HDMI passthrough. ** No instructions added yet for enabling HDMI CEC. …

• 1

  Reputation Points

• 210 replies
• 181.2k views
• 9 followers

compent

September 10, 20242 yr

I have an Orange Pi 5 Plus 16GB board, revision "1.3.1". I've been using it for about a year with official Armbian, Vendor kernel 6.1. The only issues I noticed were a non-working Type-C port and FAN connector. I thought it was an OS or DTS (Device Tree) bug... But it turned out to be a hardware problem. It started when I got another Orange Pi 5 Plus 8GB board for repair (needed to resolder the Type-C power connector). Same revision "1.3.1". Скрытый текст (left is my 16GB board, right is the 8GB board for repair; the PCB solder mask is slightly different in shade of blue — probably different manufacturers or production batches) …

• 0

  Reputation Points

• 1 reply
• 1k views

going

July 24Jul 24

Hi, everyone I have 2 rockpi s based boards, and I tried to apply an overlay to one. It actually compiled, I rebooted and the nothing more. I connected serial, e it was on U-boot, spitting this: Spoiler DDR Version V2.06 20211109 CHIP ID = 0x00003308 REG2C: 0x00000034, 0x00000034 In 589MHz DDR3 Col=10 Bank=3 Row=15 Size=512MB OUT: sdram_init finish. Boot1 Release Time: Mar 24 2022 08:28:57, version: 1.36 ROM VER:0x56323030, 19 chip_id:330800,0 ChipType = 0x13, 512 DPLL = 1300 MHz ...nandc_flash_init enter... No.1 FLASH ID:ff ff ff ff ff ff DPLL = 1300 MHz sfc nor id: ff ff ff DPLL = 1300 MHz sfc_nand id: ff ff ff NeedKHz=200KHz,…

• 0

  Reputation Points

• 4 replies
• 5.4k views
• 2 followers

yuri.vivaldi

January 31, 20233 yr

Hi. I've got a ROC-RK3399-PC SBC with a JMB585 PCIe to SATA extension card. Unfortunately PCIe always doesn't work on boot, whether it is in u-boot or kernel, with `PCIe link training gen1 timeout` error. Just as the following log: However, after I manually run these commands, PCIe seems working. ```modprobe -r pcie_rockchip_host modprobe pcie_rockchip_host ``` Kernel log: Does anyone have any idea about what is going on? Thanks in advance.

• 0

  Reputation Points

• 9 replies
• 14.5k views
• 4 followers

Igor

December 19, 20232 yr

Hey guys, i want help to install anydesk in tinker board with armbian focal

• 0

  Reputation Points

• 1 reply
• 3.6k views
• 1 follower

Werner

January 27, 20215 yr

I'd like some help please. The ethernet device naming seems inconsistent. Sometimes one interface comes up as eth0 and sometimes as eth1, and sometimes not at all. The enp1s0 interface seems to reliably come up, but not with the right config (sometimes it uses the config for enp1s0 and sometimes for eth0). I am trying to assign status IP addresses (on different networks) to each interface, but because of the unreliable bringup of the network interfaces, I can't get a config that starts up correctly and consistency on reboots or cold boots. As a test I ran the friendly-core-lite-focal from FriendlyCore and it does not have this i…

• 1

  Reputation Points

• 5 replies
• 5.1k views

poddmo

September 8, 20233 yr

My new RockPi-E works well except for a reboot. Have to power it off/on to recover. Is it a known problem? Any solution/workaround? Thanks for your time Chris

• 0

  Reputation Points

• 1 reply
• 3.3k views

Werner

March 3, 20215 yr

Hi I would like to use the UART on physical pins 3 and 5 (https://wiki.radxa.com/RockpiE/hardware/gpio) Does anybody know how to activate it? There is an overlay uart4 but it doesn't do what I expected it to do :-) Thanks Chris

• 0

  Reputation Points

• 1 reply
• 3.2k views

Werner

February 14, 20215 yr

Hey folks... We are trying to use a DHT22 sensor on rockpro64 using armbian (buster)... Is there something we need to know about GPIO pin ? We are trying to compile and use this code as a starter... https://github.com/ayufan-pine64/dht22-pine64.git But we got a segfault when using it... thanks

• 0

  Reputation Points

• 1 reply
• 2.5k views
• 1 follower

Werner

February 8, 20215 yr

Hi! I have installed Armbian buster 21.08.3 and can`t discover any externally connected i2c devices, such as rtc or ssd1306 Any ideas? i2cdetect -l i2c-2 i2c rk3x-i2c I2C adapter i2c-0 i2c rk3x-i2c I2C adapter i2c-5 i2c rk3x-i2c I2C adapter sudo i2cdetect -y 0 0 1 2 3 4 5 6 7 8 9 a b c d e f 00: -- -- -- -- -- -- -- -- -- -- -- -- -- 10: -- -- -- -- -- -- -- -- -- -- -- UU -- -- -- -- 20: -- -- -- -- -- -- -- -- …

• 0

  Reputation Points

• 1 reply
• 2.7k views
• 1 follower

Werner

November 10, 20214 yr

I have seen the uefi port for Rock 5B, which uses rk3588. seed this the opi5 use rk3588s which may lack some IOs, so I think maybe it can work on opi5 without modification. (actually i don't know how to modify to fit for it, need to learn) here i show you the result, I burn the uefi image (complied from balbes150's repo: https://github.com/150balbes/edk2_uefi ) to a tf card, then burn the image from balbes150's post to a usb portable ssd. then i change the dtb. The efi and grub can boot form tf card and then load the image from my usb ssd. successfully enter the Armbian and seems no big issues. But this can only work on the 2 type-A usb3.0, i try on usb2.…

• 0

  Reputation Points

• 0 replies
• 14.2k views
• 1 follower

Sumn255

January 4, 20233 yr

There's a few problems with the UART driver on 5.0-rc2 kernels, since proper checks are not done correctly and lead to a Null Pointer dereference. Here's a patch to avoid this issue : From 7e43ae8446b420907f00b43308ad0b99b6fe4e51 Mon Sep 17 00:00:00 2001 From: "Miouyouyou (Myy)" <myy@miouyouyou.fr> Date: Wed, 16 Jan 2019 23:58:52 +0100 Subject: [PATCH] drivers: tty: serial: Bail out if no UART is detected Before the 5.0, serial8250_register_8250_port consisted of one BIG if(uart && uart->port.type != PORT_8250_CIR) block, which prevented NULL dereference if uart, a pointer to an "uart_8250_port" detected through "serial8250_find_ma…

• 0

  Reputation Points

• 1 reply
• 2.5k views

Myy

January 17, 20197 yr

Hey there, can someone build 7.1.5 debs for me 7.1.6 broke my iptables Thanks !

• 0

  Reputation Points

• 2 replies
• 912 views

j0ta

August 18Aug 18

I'm using a kernel built from sources as there's another bug which the github sources resolve. The bundled kernel with the OS image does not kernel panic. (However this image only has around a 5% chance of mounting any nvme drive) Output: Dump from 'armbianmonitor -U' https://tmpfiles.org/dl/314994/dump.txt.tar (The Armbian self-hosted system seems to be a bit moody when it wants to work)

• 0

  Reputation Points

• 1 reply
• 3.5k views
• 1 follower

jock

November 26, 20223 yr

Hardware & OS Details: Board/SoC: SOM-RK3399 OS: Ubuntu 24.04 Base (Console tty only, no desktop GUI) Interface: DisplayPort 1.2 Alt Mode via USB Type-C (card0-DP-1) Bootloader: Image file on wiki page. Kernel cmdline: storagemedia=emmc androidboot.storagemedia=emmc androidboot.mode=normal androidboot.dtbo_idx=0 earlycon=uart8250,mmio32,0xff1a0000 swiotlb=1 coherent_pool=1m rw root=/dev/mmcblk2p8 rootfstype=ext4 rootflags=discard data=/dev/mmcblk2p9 console=ttyFIQ0 consoleblank=0 cgroup_enable=cpuset cgroup_memory=1 cgroup_enable=memory swapaccount=1 Issue Description: When booting the SOM with the Type-C cable pre-plugged int…

• 0

  Reputation Points

• 2 replies
• 836 views
• 1 follower

Boardcon_yang

August 28Aug 28

Hi, I got my RockPro64 board several days ago, and got *UPSTREAM* kernel (v5.1-rc5) and uboot (v2019.04) running on it using Archlinux ARM. (Sorry guys, I like upstream and Alarm more) The pull request for uboot-rockpro64 can be found here: https://github.com/archlinuxarm/PKGBUILDs/pull/1691 The upstream kernel is in the official core repor of Archlinuxarm (and that's why I like Alarm so much). It boots and runs mostly OK on full upstream kernel/u-boot setup. On rc-kernel it even has HDMI output working, but no hardware acceleration. I'm waiting panfrost as the open-source driver, so far it doesn't matter much as I don't …

• 1

  Reputation Points

• 21 replies
• 10.8k views
• 1 follower

Mathias

June 13, 20197 yr

While running the debian stretch desktop, I'm able to set my scroll direction in the mouse/touchpad manager but only certain programs respond to the changes. The file manager and leafpad do but chromium and the terminal window don't. Anyone know anything about this?

• 0

  Reputation Points

• 0 replies
• 2.8k views

AZClusterboard

May 3, 20197 yr

My OS OS: Armbian (24.8.4) aarch64 Host: Radxa ZERO 3 Kernel: 6.1.75-vendor-rk35xx Uptime: 5 mins Packages: 1358 (dpkg) Shell: bash 5.2.21 Terminal: /dev/pts/0 CPU: (4) @ 2.000GHz Memory: 1168MiB / 7686Mi Reference Posts x2 I have this patch already in my /etc/systemd/journald.conf I edited /etc/default/armbian-zram-config -> ZRAM_PERCENTAGE=10 but allotment size didn't increase after a reboot (~47M before as well). By default this variable was commented out Filesystem Size Used Avail Use% Mounted on tmpfs 769M 24M 745M 4% /run /dev/mmcblk1p2 116G 32G 84G 28% / tmp…

• 0

  Reputation Points

• 1 reply
• 2.3k views

ioncube

June 29, 20251 yr

EDIT: I tried using ext4 rather than btrfs and.. somehow that solved it? I don't understand how the SSD file system would change how the bootloader is flashed because if properly flashed, the SD card shouldn't work at all, unless something has changed. Hey all, I wanted to move to the newest version of armbian (25.2.1) and for whatever reason neither `apt update && apt upgrade` nor `armbian-upgrade` (as a sanity check) worked so I wiped the SPI flash using `mtdtools` as prescribed in the forum post linked on the support page. 1) Booted from SD, installed Armbian and the bootloader. 2) Shut down, removed SD and turned on. Machine hung and never boote…

• 1

  Reputation Points

• 4 replies
• 6.4k views

Jacob Olness

May 7, 20251 yr

Hmm... I have similar problem for Asus tinkerboard hangs thread's thing. First, I've reinstall OS few days ago, because OS partition is crashed by system hangs. I've test next build but it can't be reboot (I don't know why). cause I've install legacy build. It looks pretty works well, so I've install 'transmission-daemon' to build my own seedbox. I've plugged 500GB 2.5in External HDD and 128GB Flash Drive, and use 3A Micro-USB adapter. then... ta-da! system hangs! generally It works good 1~2 days after boot. but randomly hangs. I think it's temp things cause install Fan on 3.3V GPIO, but same. It hangs. B…

• 1

  Reputation Points

• 15 replies
• 12.3k views
• 1 follower

mpmc

October 28, 20178 yr

Anybody else seen this ? Just upgraded and after a reboot Armbian wont boot into desktop. Xorg Looks good with no errors and I can see the kernel boot screen and log in via ssh. If I disconnect and reconnect the HDMI I get the following ... but nothing appears on the monitor [ 1733.805014] rockchip-vop ff900000.vop: [drm:vop_crtc_enable] Update mode to 1920x1080p60, type: 11 The screen remains on as it can detect the graphics display .... its just blank what display manager does Armbian use ?

• 0

  Reputation Points

• 19 replies
• 10.2k views
• 1 follower

pfry

March 17, 20197 yr

Hello, I have 2 questions. 1. How long does the support for the tinkerboard takes. Because I'm using the Board as Server and i don't need much CPU Power but I don't like to buy every 2-4 years a new board because the support ended. The reason of this question is, the odroid c1, there is no stretch image for this board. 2. Is there a good howto, how to build a kernel on a thinkerboard with own config? Reason for this question is, I have installed the latest armbian stretch server image on my tinker board and the kernel has no ebtables support. Second Reason ist question 1, build a own Kernel and update to Debian 10,11, ...., n.

• 0

  Reputation Points

• 8 replies
• 5.7k views

Tinker_Newbi

July 15, 20188 yr

I've been trying to implement traffic shaping using tc. But it seems that ingress is not working. I am running Armbian Minimal Server on Orange Pi 5. Running this command: tc qdisc add dev eth0 ingress Will throw an error: Error: Specified qdisc kind is unknown. This has been working for orange pi pc/one armbian. Does the ingress module missing from this build? Can anyone point me to the right direction. Thanks.

• 1

  Reputation Points

• 2 replies
• 3.7k views
• 1 follower

phatz

February 14, 20233 yr

Hi, i just tried to install ubuntu 16.04.2 on my tinkerboard, but i got a problem while changing the password as prompt on the first boot : when i try to change it, by anything i write, it just give me that message i use as title. can anyone give me help ? i dont find anyway to go further.

• 0

  Reputation Points

• 3 replies
• 4.2k views
• 1 follower

martinayotte

September 6, 20179 yr

Hi, I've got several tinkerboards that I've reproduced this problem on. I'm using the tinkerboard to do network tests, this includes iperf3 traffic,dns querys (dig), https and http (echoping), and ping. All of these tests runs against IPv6 targets and IPv4 targets. These tests are scheduled to very frequently (every other minute or so). To begin with, all tests run fine.. I get good results (~1gbit throughput / low latency / no packet loss). However, after running the tests for 15-20min, suddenly all traffic will more or less stop working (80-90% packet loss). This is no matter what I'm pinging, can be the local router, some target on the…

• 0

  Reputation Points

• 7 replies
• 7k views
• 1 follower

berre

May 13, 20188 yr

Hy, I have a Tinkerboard with armbian ( debian jessie). When I put behind my fiber router, and i do a speed test i have : With iperf3 ==> download : 980M and upload : 240M with speedtest-cli ==> More or less Results. I wanted to conenct my Asus's card behind the ONT(Optical Termination Boxes) i can connect with pppoe or dhcp. And in pppoe or dhcp my speed test show this : With iperf3 ==> download : 110M and upload : 80M with speedtest-cli ==> More or less Results. I have tested with anorther Board, bananapi mé with Bananian and i have the same Results if I put behin…

• 1

  Reputation Points

• 11 replies
• 7.6k views

Ren Ping

February 20, 20197 yr

@Igor@amazingfate Can someone look at this issue please ? I am wondering if this is possibly affecting a large number targets or whether its just BananaPi-M7 / rockchip64 ? I have tried on another monitor also and am getting a black screen. On doing an `apt-get upgrade` on ssh terminal I happened to loose by HDMI display. AFAICT It looks like Ubuntu 'backgraded' gnome v46 (in Nobel release, and also in my older unofficial image) to v44. https://armbian.atlassian.net/jira/software/c/projects/AR/issues/AR-2702?jql=project %3D "AR" ORDER BY created DESC

• 1

  Reputation Points

• 19 replies
• 4.6k views
• 1 follower

MaxT

July 19, 20251 yr

`ls /dev` is not showing mmcblk1. I have Armbian Ubuntu install that may have been messed around with and is not showing /dev/mmcblk1, where as a fresh uSCDCard install is.

• 0

  Reputation Points

• 13 replies
• 4.2k views
• 2 followers

AaronNGray

July 21, 20251 yr

Hello, I'm trying to setup a hotspot on a tinkerboard S running bullseye. Following the procedure from https://docs.armbian.com/User-Guide_Advanced-Features/ at the point where it requires: 2. Copy /etc/network/interfaces.hostapd to /etc/network/interfaces i realize the file interfaces.hostapd is missing, even though hostapd is installed hostapd is already the newest version (3:2.10-6~armbian22.02.3+1) I manually created the file with the following content even though I'm not sure if that's correct (as referred in one post on the forum): auto lo br0 iface lo inet loopback all…

• 0

  Reputation Points

• 0 replies
• 2.6k views
• 1 follower

alex9534126

December 31, 20223 yr

Hello all, I am running an Orange Pi 5 board with Armbian on a SD Card and I realized that my /var/log path is constantly full, with it being at /dev/zram1 It gets full at 50Mb with the file /var/log/samba/cores/smbd/core taking up all the space I have not managed to read this file, so I can't tell what kinds of errors are showing up. My OpenMediaVault and samba setup are running perfectly fine, and even though I delete this core file, it shows up again during reboot. I have tried to set enable core files = no in smb.conf With no sucess. The file continues to show up during reboot. Any ideas how to solve this? …

• 1

  Reputation Points

• 7 replies
• 8.7k views
• 1 follower

bedna

Thursday at 03:56 AM3 days

I have edge kernel installed and working. I compiled the v4l2 ffmpeg but some of my av1 videos are not working. After some digging I noticed that v4l2-ctl --device=/dev/video4 --list-formats-ext ioctl: VIDIOC_ENUM_FMT Type: Video Capture Multiplanar [0]: 'VT12' (Y/UV 4:2:0 (4x4 Linear)) [1]: 'NV12' (Y/UV 4:2:0) Shouldn't this include the 10 bit formats as well? (NV15?) Does anyone know why the 10 bit format is missing in the kernel? Is this specific to the orange pi? I found this GitHub - dongioia/rock5bplus-rkvdec2: Rock 5B+ (RK3588) on mainline Linux 7.1: V4L2 stateless RKVDEC2/Hantro hardware video decode (…

• 0

  Reputation Points

• 3 replies
• 1.4k views
• 1 follower

ArmBoy1988

August 5Aug 5

Does anyone know what to do to enable 1920x1200 resolution? I've done the xrandr newmode/addmode and it shows in the display app but doesn't work. At the command line... xrandr --output HDMI-1 --mode 1920x1200_60.00 xrandr: Configure crtc 0 failed The monitor and tinker board support 1920x1200 and it works with tinkeros.

• 0

  Reputation Points

• 0 replies
• 2.9k views

freak

September 22, 20179 yr

Hi friends, I have one nagging thorn in my side that I just cannot figure out. I need someone who has a 1password account for help with this one. The problem - their desktop app and browser plugin work in tandem -- and it will not synchronize on Armbian for some reason. I've tried everything I can think of - ensuring nothing is downloaded from Flatpak and therefore sandboxed and preventing any connectivity issues. But still not working. If someone can take 5 mins and create a free trial account on 1password, then here are the steps to reproduce: Download the latest arm64 version of 1password Desktop: curl -sSO https://downloads.…

• 0

  Reputation Points

• 1 reply
• 2.7k views
• 1 follower

laibsch

July 26, 20251 yr

As a warning: I have a RockPro64 that was initial setup using the Armbian 20.02.1 buster desktop image (using the 5.4.20 kernel). Over the past few months, I have accepted each minor release of Armbian up to the 20.05.7 release with a 5.4.49 kernel Yesterday, I installed the 20.08 upgrade with 5.7.15 kernel, and the board failed to boot. I have only just got it working again. (I had to restore the kernel and supporting files from a recent backup, and restore symlinks in /boot). I don't know the root cause. I have ordered a second MicroSD card so that I can try booting from a fresh 20.08 image, and I will report back on what happens. In …

• 0

  Reputation Points

• 48 replies
• 25.3k views
• 1 follower

MEMEs

November 17, 20205 yr

I just download Armbian_20.11.6_Tinkerboard_bionic_legacy_4.4.213_desktop.img.xz flased it on sd card with balenaEtcher, tried to boot and got error: So. I can't do my first login.

• 1

  Reputation Points

• 8 replies
• 4.8k views

Igor

January 20, 20215 yr

Hi, A UEFI-ARM64 install of armbian opi5+ 24.11.0-trunk fails during armbian-install due to incorrect knowledge of partitions: root@uefi-arm64:/usr/sbin# lsblk -l NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINTS sda 8:0 1 14.4G 0 disk sda1 8:1 1 256M 0 part /boot/efi sda2 8:2 1 14.2G 0 part /var/log.hdd / zram0 252:0 0 7.7G 0 disk [SWAP] zram1 252:1 0 50M 0 disk /var/log zram2 252:2 0 0B 0 disk nvme0n1 259:0 0 953.9G 0 disk nvme0n1p2 259:3 0 953.6G 0 part /mnt/armbian-install.NQULbp/rootfs /mnt/tmp…

• 1

  Reputation Points

• 21 replies
• 6.9k views

ozacas

October 12, 20241 yr

I just upgraded to Arabian 24.5.1 using `apt-get upgrade` and now I cannot load ip_tables: # modprobe ip_tables modprobe: ERROR: could not insert 'ip_tables': Exec format error I’m not sure what to make of it.

• 0

  Reputation Points

• 7 replies
• 5.4k views
• 1 follower

Koehn

November 26, 20241 yr

VERSION=24.8.4 REVISION=24.8.4 Problems: No display. (access only via SSH) CIFS mounts fail Lots of dmesg messages similar to: ... [ 6.421534] rtk_btusb: disagrees about version of symbol module_layout ... [ 6.504179] uio: disagrees about version of symbol module_layout ... [ 376.377046] ipv6: disagrees about version of symbol module_layout ... [ 379.869911] cifs_md4: disagrees about version of symbol module_layout ... Is this problem known about?

• 1

  Reputation Points

• 3 replies
• 3.1k views
• 1 follower

robnielsen

October 24, 20241 yr

Hello, I am using the latest Desktop Armbian and use the internal wifi and a usb wifi stick (edimax ew 7811-un). Both devices are detected by network-manager. I use network-manager to connect to my router. I get internet. Minutes later, there is DNS conflict (/var/log/syslog) and I cannot resolve any websites anymore. I only see dhclient DHCPDISCOVER on eth0 255.255.255.255 for some reasons. I have this problem with a fresh installed Armbian. How can I solve this? Thank you

• 0

  Reputation Points

• 4 replies
• 4.6k views

tkaiser

December 22, 20178 yr

I connected a 49" super wide curved monitor (philips 49b2u5900) to opi5+ through HDMI. I would expect to have the possibility to choose between resolutions of 5120x1440 or 3840x1080. Unfortunately I only get 16:9 resolutions. v24.8.4 for Orange Pi 5 Plus running Armbian Linux 6.1.75-vendor-rk35xx Packages: Ubuntu stable (noble) david@orangepi5-plus:~$ xrandr Screen 0: minimum 16 x 16, current 3840 x 2160, maximum 32767 x 32767 HDMI-1 connected 3840x2160+0+0 (normal left inverted right x axis y axis) 1190mm x 340mm 3840x2160 59.98*+ 2048x1536 59.95 1920x1440 59.97 How can I configure the proper resolution? I as have little e…

• 0

  Reputation Points

• 2 replies
• 2.8k views
• 1 follower

David D.

December 14, 20241 yr

Hi, I've trouble getting 3840x2160 resolution to work. When I try to switch to that resolution the monitor says resolution is 3848x2160 and display is all garbled. 2560x1440 works fine. Also, If I try to login to Gnome (Wayland) I get blank screen and I'm back at the login screen. X11 lets me login to the system. uname -a: Linux lindon 5.10.110-rockchip-rk3588 #trunk.0184 SMP Fri Jan 20 18:24:04 UTC 2023 aarch64 aarch64 aarch64 GNU/Linux I've fetched the latest updates (apt update && apt upgrade) and I've just ran firmware update using armbian-config. Edit: display is connected via usb-c - - > displayport cable.

• 0

  Reputation Points

• 2 replies
• 2k views

edarrek

February 16, 20233 yr

So, if you use the mainline DTSI files, you'll encounter an issue when loading the Mali Midgard GPL kernel module, since the main ARM kernel maintainers changed how the "compatible" properties of Midgard GPU nodes should be defined. Don't ask me why, they created an entire documentation stating that now the Mali Midgard GPU nodes have to harbour the chip series number, a vendor-specific statement, and drop the "arm,mali-midgard" property. The additions are nice, since they allow a quick detection of the chip number and the chip vendor using /sys nodes names. However, turns out that the Mali kernel driver used the dropped property to detect the GPU. So, I've …

• 0

  Reputation Points

• 2 replies
• 5.1k views

Myy

August 7, 20179 yr

Just got my new tinkerboard powered up with armbian. For some reason I could not get anything after build 1.3 off the Asus site to boot! Anway, first impressions good, however in the graphics settings it seems to max out at 1920 x 1080 whilst on paper the tinkerboard is supposed to support 4k. I'll admit I am new to linux so perhaps i'm missing something ovbious, but if someone could explain how I can up the resolution to 3,840 x 2,160 that would be great. For the avoidance of doubt I have it connected to an Acer 27" 4k monitor.

• 1

  Reputation Points

• 8 replies
• 8.8k views

zador.blood.stained

August 4, 20179 yr

Hello, the latest armbian image (Bookworm_current_xfce) with kernel 6.6 has issues with the winstar tftp 5 inch hdmi display that I am using. Bootloader (u-boot) is showing but after loading the kernel message, screen goes blank. The screen resolution is 800x480, in attach the pdf specs. Info: the official asus image with kernel 4.4 works, but it is not an option for me as I don't want to use debian buster. Please help. Thank you very much. Bogdan WF50FSYFGDHNV.pdf

• 0

  Reputation Points

• 13 replies
• 7.3k views
• 2 followers

jock

November 14, 20241 yr

I grabbed the "Armbian 25.8.1 Bookworm Minimal / IOT" image from https://www.armbian.com/tinkerboard/, landed it on a microSD card, booted it, and ran apt update apt upgrade apt install linux-headers-current-rockchip apt install zfs-dkms zfsutils-linux This gets me linux-image-current-rockchip 25.8.1 (kernel 6.12.44-current-rockchip) and a module built from zfs-dkms 2.3.2-2~bpo12+2. So far so good. And then I ran modprobe zfs.ko and was rewarded with the following panic in the kernel's module loader: [ 1128.728803] spl: loading out-of-tree module taints kernel. [ 1128.859152] zfs: module license 'CDDL' taints kernel. [ 1128.859178] Disabling lock debuggin…

• 0

  Reputation Points

• 3 replies
• 5k views
• 1 follower

nwf

November 11, 2025Nov 11

Hi, ive been trying to resolve the screen issue issue on my cb2 for a few days now, i cannot get it to work. I'm running Armbian_26.2.1_Bigtreetech-cb2_trixie_current_6.18.8_minimal, everything works. HDMI outputs to a 4K display just fine except for my small 5" display, which just stays black. The os has not been tempered with, i've flashed a fresh copy and used armbian-upgrade it, thats all. I've diagnosed the problem enough to see that its an EDID issue or the rk3566 just not likely my weird screen resolution. BTT os who also use armbian as a base somehow fixed this official issue. The display is being detected by the OS. My Armbian OS: root@big…

• 0

  Reputation Points

• 0 replies
• 452 views

faraz ahmed

August 1Aug 1

Only sharing what I managed to make working on the Orange Pi5: a Tvheadend server with satellite cards TBS 5527 and TBS 5520se. The rough path I followed: - recompiled the kernel in order to have "Linux tv" as a module (CCONFIG_DVB_CORE=m). This will be replaced by the tbs driver in next steps. - installed TVheadend from the armbian-config - compiled tbs drivers by following standards instructions....but: - had to add a CFGLAGS += -w to avoid some warning stopping the build (Makefile in the v4l directory) - had to disable the creation of the mc.ko (MEDIA_CONTROL) to avoid conflict with kernel built-in module (n…

• 0

  Reputation Points

• 0 replies
• 1.7k views

Tony3

February 12, 20233 yr

Hi, After bleeding edge 6.8 or so, I lost HDMI output. Does anyone run the recent kernels with HDMI? Which ? The 6.1.75 kernel has HDMI, but a lacks Mt7961 wifi, and changing keyboard does not work, which probably is my lack of understanding of wayland. Gullik PS the HDMI issue might be a resolution thing, unfortunately I use an old TV ( 1920x1024)

• 0

  Reputation Points

• 4 replies
• 3.5k views

jyce

October 11, 20242 yr

Someone asked in a different thread how I got Dolphin to run so thought I'd start a thread so not to pollute the other one. Basically it wasn't that hard especially if youve done some git'hubbing before. I think I followed the 'Ubuntu' instructions here. Make sure you get the dependencies and do all the steps correctly. It should build without problems if you do. (remember you have a lot of cores on Opi5 so can use 'make -j6' or even higher) https://github.com/dolphin-emu/dolphin/wiki/Building-for-Linux You then want to set a config flag to make Dolphin use GLES instead of big brother OpenGL. (you probably wa…

• 0

  Reputation Points

• 8 replies
• 13.2k views

Fredrik

October 17, 20241 yr

I'm looking to try an OPi5 for GPGPU. After seeing trunk recently added the patches needed to use the "gofaster" option for panfork, and having seen reports of glmark2 scores of 4000 and 5000 while never coming close to that myself, I decided to pull together the various bits of info out there and just try all of the options. A number of things done below are often described vaguely -- hopefully it's helpful here to lay out a concrete set of steps to follow and what to expect. There are two options for accelerated video: panfork and ARM's closed source "blob" driver. With either option, it sounds like you should switch from X11 to Wayland. If you are looking a…

• 1

  Reputation Points

• 17 replies
• 38.5k views
• 1 follower

balbes150

March 21, 20233 yr

Hi there! I am trying to set up communication between an Attiny85 and my RockPro64 over UART (running Armbian, kernel `Linux rockpro64 5.8.1-rockchip64 #20.08 SMP PREEMPT Mon Aug 17 08:17:08 CEST 2020 aarch64 aarch64 aarch64 GNU/Linux`). The issue is that I can't connect to the serial port: rock64@rockpro64:~$ sudo picocom -b 115200 /dev/ttyS4 picocom v3.1 port is : /dev/ttyS4 flowcontrol : none baudrate is : 115200 parity is : none databits are : 8 stopbits are : 1 escape is : C-a local echo is : no noinit is : no noreset is : no hangup is : no nolock is : no send_cmd is : sz -vv receive_cmd is : rz -vv -E imap is …

• 0

  Reputation Points

• 5 replies
• 6.3k views
• 1 follower

antonlyap

October 4, 20206 yr

Hello, I usually use the Next version of the image for the tinkerboard. I would like to use the nightly version. But the nightly version does not automatically log on to the user I created at the beginning in contradiction to the other version. How do I reactivate automatic login in nightly build ? Thanks

• 1

  Reputation Points

• 10 replies
• 15.9k views
• 1 follower

freak

October 11, 20179 yr

The base device tree for the Renegade (roc-rk3328-cc) already includes a PWM2 device but armbian does not include the .dtbo to enable it. Thus, it is also unavailable through armbian-config. The Libre builds of Debian support it, but not armbian. I have copied the overlay from the Libre build of Debian for Renegade and it applies correctly on after I manually add it to the overlay directory: /boot/dtb-6.12.32-current-rockchip64/rockchip/overlay/rockchip-rk3328-pwm2.dtbo Note that as of today armbian-config is having a general issue with loading overlays via armbianEnv.txt. This can be bypassed by avoiding using armbian-config for overlays and …

• 0

  Reputation Points

• 0 replies
• 2k views

Tom Sl

June 11, 20251 yr

Hi I have a Philips pcf8563 RTC that connects to i2c-1. Could you please add support for RTC modules please particularly the pcf8563 and the DS1307 as these seem to be the most popular although some more models would be welcome. I have been trying to create a dtb with a previous kernel that included the needed modules but failed to get it to compile. I even tried adding it to the main device tree with no such luck. I know it's not been talked about much but would love to get RTC working on the tinkerboard. For those that haven't noticed the RK808 power management chip on the tinkerboard has RTC capability built in and even has the drive…

• 0

  Reputation Points

• 5 replies
• 5.2k views
• 1 follower

gaz2613

September 5, 20179 yr

I built apt packages for the OPI 5 wiring pi and have them hosted in lauchpad https://launchpad.net/~erik1220/+archive/ubuntu/wiringpi-opi Any way to contribute them to the official build? Btw apt-add-repository is broken on 25.8 - I assume it is a side effect of python 3.11... seen similar errors on ubuntu

• 0

  Reputation Points

• 0 replies
• 1.7k views
• 1 follower

OttawaHacker

July 23, 20233 yr

Hello! Does anyone, and by anyone I probably really mean @balbes150 :D, know what I need to do when building official Mesa for it to be recognized in the experimental 6.x kernel environment? There's a panfrost focused dev/staging branch that the panfrost devs are using that I would love to try and be able to build for OPi5 but when I do it I always just get llvm. balbes, you are managing to get the GPU recognized would you be able to share how that's done in the building? I'm not asking for you to provide a build I would just love to know how you do it so I can as well and test the new versions as they happen. This is the branch and commits…

• 0

  Reputation Points

• 5 replies
• 6.9k views

balbes150

October 6, 20233 yr

Hi @ all, long time reader, but never managed to register. Now it is time... as I'm not able to solve this myself, kindly asking for help. I'm stuck, my Orangepi 5 plus stops boot at this: Loading, please wait... Starting systemd-udevd version 252.36-1~deb12u1 Begin: Loading essential drivers ... done. Begin: Running /scripts/init-premount ... (initramfs) What happened before? Last year I bought the Orangepi 5 plus (8GB) and went ahead, testing everything out - having incredible fun with this little box. But with a way to old/slow sd card which finally failed two or three months ago. I went ahead and wrote the A…

• 0

  Reputation Points

• 4 replies
• 4.5k views

Zyxx

April 2, 20251 yr

I'm using the ps2 emulator and when I try to run a game I get an error message "OpenGL is not supported. Only OpenGL 3.0 was found" I'm using the version "Armbian 23.02 Jammy Gnome"

• 0

  Reputation Points

• 4 replies
• 7.8k views
• 1 follower

Hqnicolas

June 29, 20242 yr

In case anyone wondering, AIC8800D80 found in Raxda Zero 3W and Radxa Cubie A5E (aic8800 driver) supports WPA3 SAE, but not GCMP/GCMP-256 ciphers. root@radxa-zero3:~# iw phy Wiphy phy0 wiphy index: 0 max # scan SSIDs: 3 max scan IEs length: 200 bytes max # sched scan SSIDs: 0 max # match sets: 0 Retry short limit: 7 Retry long limit: 4 Coverage class: 0 (up to 0m) Device supports RSN-IBSS. Device supports AP-side u-APSD. Supported Ciphers: * WEP40 (00-0f-ac:1) * WEP104 (00-0f-ac:5) * TKIP (00-0f-ac:2) * CCMP-128 …

• 0

  Reputation Points

• 1 reply
• 3.6k views
• 1 follower

laibsch

August 22, 20251 yr

Hi, I have tried Rock 5b images with Kernel 6.8.10. Any of image I've tested will not start. No LED flashing, no HDMI signal.. nothing. The others with Kernel 6.1.43 starts fine.

• 0

  Reputation Points

• 3 replies
• 3.9k views
• 1 follower

Igor

June 5, 20242 yr

root@calypso:~# uname -a Linux calypso 6.12.0-current-rockchip-rk3588 #3 SMP PREEMPT Sun Nov 17 22:15:08 UTC 2024 aarch64 GNU/Linux cat /proc/asound/cards 0 [Audio ]: USB-Audio - USB Audio Bluetrum USB Audio at usb-xhci-hcd.1.auto-1, full speed 1 [rk3588es8316 ]: rk3588-es8316 - rk3588-es8316 rk3588-es8316 HDMI itself works perfect, monitor and cable tested for video and sound OK Both audio cards work with alsa - pulseaudio but no HDMI sound. Any suggestions how tho get the hdmi audio cards for HDMI0 and HDMI1 How to enable the HDMI sound driver? Thanks…

• 0

  Reputation Points

• 12 replies
• 7.3k views

Wilhelm Moser

January 24, 20251 yr

Hi, I'm someone who's suffering with an unreliable pcie nvme upon booting. Apparently there was a patch for this issue. Unfortunately the whole time I've owned this device - doing a kernel update via armbian-config will just stop your device from booting and even outputting to the display. Is there a repo just with the precompiled kernels in .deb form?

• 1

  Reputation Points

• 2 replies
• 3.1k views

Turbine

November 14, 20223 yr

Hello i hope you all have a nice day At first i need to thank you for all the work you done. I'm runnig my ROCKPro64 no for a while now Today i wanted to try wifi and bt but it looks we dont have any drivers for the module AMPAK AP6256 Combo Module and made specifically for the ROCKPro64 Debian 10 headless 20.08.0-trunk Can someone help me to reach the goal to use my wifi ?

• 0

  Reputation Points

• 2 replies
• 4.8k views

max12m3

July 13, 20206 yr

Whats the correct way to get the Armbian build to spit boot out as a separate fat partition at the start of the image? Im just getting started with Armbian (on tinker board) and want to integrate it into by own build system. I need to generates SD card images with 3 different configs building 3 separate installs sharing a common multiboot 512MB fat boot partition. I dont need the Armbian build to do the multiboot or manage the boot partition at all, I just want to be able to extract the root & boot fs at the end of the build process.

• 0

  Reputation Points

• 0 replies
• 3.5k views
• 1 follower

botfap

September 28, 20179 yr

Homeassistant fails to install logs.txt

• 0

  Reputation Points

• 3 replies
• 4.5k views
• 1 follower

Marco Zberg

March 18, 20251 yr

What do I need to do to fix this error? Here is some information: root@orangepi5 ~# lsb_release -a No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 22.04.2 LTS Release: 22.04 Codename: jammy root@orangepi5 ~# root@orangepi5 ~# uname -a Linux orangepi5 5.10.110-rockchip-rk3588 #23.02.2 SMP Fri Feb 17 23:59:20 UTC 2023 aarch64 aarch64 aarch64 GNU/Linux root@orangepi5 ~# root@orangepi5 ~# apt install -y bpfcc-tools libbpfcc-dev python3-bpfcc libbpfcc Reading package lists... Done Building dependency tree... Done Reading state information... Done The following additional packages will be installed: ieee-data libclang-cpp11 libllvm11 python3-n…

• 0

  Reputation Points

• 0 replies
• 3k views
• 1 follower

xiaoke

March 6, 20233 yr

Hi, I recently got my hands on a used unit of those, quite faster than my old SBC! Only issue I currently have is that I can't seem to get audio output on the 3.5mm jack. (Well the other issue is unrelated .. ) Anyone have an idea on what I should be hunting? I did the obvious cable, etc.. checks. There's always the possibility that it's damaged, hell if I know. Armbian 25.2.1 6.1 kernel KDE Neon (Why use a beta version btw? just wondering) Thanks! DW.

• 0

  Reputation Points

• 9 replies
• 5.7k views
• 2 followers

OttawaHacker

November 10, 2025Nov 10

Hi there Board, I have bought my Tinkerboard after some good research with my fellow techies at Red Hat and reading thoroughly that 19+pages Tinkerboard Thread. After crafting a super lean/mean kernel (kconfig at https://gist.github.com/rfrht/5f0fa113f12fbacf832e57ff4967785a ), I got a stable and lightweight kernel configuration. Things got a lot funnier when doing some compatibility tests with specific Asterisk versions, I was able to install and run cleanly a Raspi .DEB pkg. And that got me thinking. I have now JUST replaced the Raspberry Pi with the Tinkerboard. And guess what: It was a _inplace_ upgrade! Using the same u…

• 0

  Reputation Points

• 0 replies
• 3.1k views
• 1 follower

Rfreire

April 14, 20188 yr

Introduction This guide describes a tested method for running Android, Armbian, and Ubuntu on the same NVMe SSD of the Orange Pi 5 Plus. This is not an official Orange Pi installation procedure. The entire workflow was developed through extensive real-world testing. The following configuration has been successfully verified: ✅ Android boots from the NVMe SSD. ✅ Armbian boots from the same NVMe SSD via UEFI. ✅ Ubuntu boots from the same NVMe SSD via UEFI. ✅ All three operating systems coexist on a single NVMe SSD. ✅ Armbian and Ubuntu share the same EFI partition. ✅ Android, Armbian, and Ubuntu can share a common data partition. 1. Requirements Har…

• 0

  Reputation Points

• 0 replies
• 1k views
• 1 follower

Tâm Vũ Minh

July 10Jul 10

I just tested the latest, 2025 May, built image with default/recommended options and there are some missing features. Here is what I have tested: LAN yes WiFi yes BT yes USB3 *partly, some devices are not detected at all, some will take a few minutes before detected* GPU Mali-G610 (Panfrost) HDMI audio *no* Fan control yes temp. sensor htop *no* Temp. sensor Gnome *no* Other: some cursor graphic glitches Armbian-unofficial_25.05.0-trunk_Rock-5c_noble_current_6.12.28_gnome_desktop.img Any ideas on how to get more features supported?

• 0

  Reputation Points

• 6 replies
• 5k views

Guest

May 13, 20251 yr

I've noticed that some system images will start the OrangePi with 4:2:2 output on HDMI instead of 4:4:4. This causes artifacts, especially when there's white text on a red background. What's the interface or method to change this? Does this have to be done via U-Boot or can it be done in userspace?

• 0

  Reputation Points

• 3 replies
• 2.7k views
• 1 follower

jock

May 2, 20242 yr

Hello! Has anyone tried to play straight unconverted hevc video from a GoPro 11? Iv'e tried ffplay and gst-play but I'm just getting a static image and a bunch of these errors, [swscaler @ 0x7f49d399c0] [swscaler @ 0x7f49d47a50] deprecated pixel format used, make sure you did set range correctly I have successfully played example jellyfish videos of hevc and hevc 10bit formats, ffmpeg reports the following details from the GoPro footage, Stream #0:0[0x1](eng): Video: hevc (Main) (hvc1 / 0x31637668), yuvj420p(pc, bt709), 3840x2160 [SAR 1:1 DAR 16:9], 119725 kb/s, 119.88 fps, 119.88 tbr, 120k tbn (default) …

• 0

  Reputation Points

• 1 reply
• 1.8k views

royk

July 19, 20233 yr

i'm stuck with this since day 1 but now i upgraded to armbian (with kodi-gbm) i had this problem worse stress testing the board with stress -c 4 doesn't bring the board into shutdown, but logging in to kodi-gbm or using graphical interface? it brings instability all of a sudden. there's no inherent pattern from the shudowns except when i launch kodi or access some files (emby transcoding doesn't cause any instability). anything outside the text mode should cause it to shutdown. weirdly enough, when i removed the USB peripherals (2xUSB HDD, own power supply for both cases) the instability worsens and doesn't boot or sometimes reboot cycle after fsck.ext4 on sta…

• 0

  Reputation Points

• 1 reply
• 3k views
• 1 follower

xAda

January 13, 20233 yr

Is there a status page like http://linux-sunxi.org/Linux_mainlining_effort , but for Rockchip? (I suspect there's not. )

• 0

  Reputation Points

• 2 replies
• 3.3k views

richardk

February 15, 20197 yr

The overlay for the ap6275p seems to be missing in the new fresh 6.10 images. Haven't tried to compile a custom image yet (so might just be disabled in current build), but how could I help to bring this overlay to the official image?

• 0

  Reputation Points

• 1 reply
• 2.8k views
• 1 follower

Werner

September 15, 20242 yr

I tried both the 6.8.10 and 6.1.43 releases from CI pipeline and none of these has the ap6275p wifi option in the armbian-config tool. There was a previous post that mentioned that the module got merged for the new kernels but is there an ETA to have this one in the CI releases? I'm curious to try vlc but haven't been able to install that one yet with the new releases.

• 0

  Reputation Points

• 3 replies
• 3.1k views
• 2 followers

Efe Çetin

May 28, 20242 yr

For some odd unknown reason. I can not get the following installed and running. (using official os for Opi5) 1- A virtual machine running on armbian. 2- Dolphin emu 3- Waydroid Thx, vandyman

• 0

  Reputation Points

• 1 reply
• 1.6k views
• 1 follower

Werner

June 3, 20233 yr

v4l2loopback-dkms 0.12.7-2 fails to build make.log: DKMS make.log for v4l2loopback-0.12.7 for kernel 6.12.32-current-rockchip64 (aarch64) Sat Jul 5 09:16:17 PM CDT 2025 Building v4l2-loopback driver... make -C /lib/modules/6.12.32-current-rockchip64/build M=/var/lib/dkms/v4l2loopback/0.12.7/build modules make[1]: Entering directory '/usr/src/linux-headers-6.12.32-current-rockchip64' CC [M] /var/lib/dkms/v4l2loopback/0.12.7/build/v4l2loopback.o /var/lib/dkms/v4l2loopback/0.12.7/build/v4l2loopback.c: In function ‘vidioc_querycap’: /var/lib/dkms/v4l2loopback/0.12.7/build/v4l2loopback.c:717:9: error: implicit declaration of function ‘strlcpy’; did you mean ‘strncp…

• 1

  Reputation Points

• 4 replies
• 7.3k views
• 2 followers

laibsch

July 7, 20251 yr

Please advise on how to fix this, thanks: Setting up rockchip-multimedia-config (1.0.2+jammy) ... dpkg-query: error: --listfiles needs at least one package name argument Use --help for help about querying packages. dpkg: error processing package rockchip-multimedia-config (--configure): installed rockchip-multimedia-config package post-installation script subprocess returned error exit status 1 Errors were encountered while processing: rockchip-multimedia-config E: Sub-process /usr/bin/dpkg returned an error code (1)

• 0

  Reputation Points

• 6 replies
• 5.1k views
• 1 follower

FierroMarco

December 9, 20241 yr

Hi. By updating the system today caused the hardware acceleration to fail. Start-Date: 2023-08-04 12:26:33 Commandline: apt upgrade Upgrade: armbian-jammy-desktop-gnome:arm64 (23.02.2, 23.08.0-trunk--1-Vf900-B4c8e), system-monitoring-center:arm64 (1.43.9, 1.43.10), ufw:arm64 (0.36.1-4build1, 0.36.1-4ubuntu0.1), libmutter-10-0:arm64 (42.9-0ubuntu1, 42.9-0ubuntu4), libpoppler-cpp0v5:arm64 (22.02.0-2ubuntu0.1, 22.02.0-2ubuntu0.2), mutter-common:arm64 (42.9-0ubuntu1, 42.9-0ubuntu4), poppler-utils:arm64 (22.02.0-2ubuntu0.1, 22.02.0-2ubuntu0.2), libpoppler-glib8:arm64 (22.02.0-2ubuntu0.1, 22.02.0-2ubuntu0.2), gir1.2-mutter-10:arm64 (42.9-0ubu…

• 0

  Reputation Points

• 6 replies
• 6.9k views
• 1 follower

-

August 8, 20233 yr

Hi everyone, I've been working with Armbian for a while on my Rock Pi S, I got to a stable situation on version 24.11.1 with kernel 6.6.63 where everything worked perfectly... but recently this last week I applied an apt upgrade, which applied strong base modifications (linux-current-rockchip64 and dtbo going from 24.11.1 to 24.11.3), after applying this update and rebooting, I can't get it to boot again, either from the Micro SD or from the eMMC installation. I wanted to report this bug, but I don't have a TTL cable at hand to be able to do the corresponding debugging... I've tried to flash older versions, or even flash the 24.11.1 version again …

• 0

  Reputation Points

• 40 replies
• 22.2k views
• 3 followers

Meestor_X

February 10, 20251 yr

Starting today Oct 27 2025 I'm not able to upgrade armbian on Radxa 5C for any version from 6.12 and up with the multiple exceptions like this: Err:6 http://apt.armbian.com trixie/main arm64 armbian-plymouth-theme all 25.8.2 Hash Sum mismatch Hashes of expected file: - SHA512:718d46957b9e9940ba7569761069864c46b07bd5570db462894b81d2730803dc9f9b0618ed45104c6357b92ddf00600a9664b93bd3eaca8c453b4724ba495688 - SHA256:3ee8733f28c38f66f3a1328c93bf75d00416f8e2d1e7a5c91f4727489d7c1b00 - SHA1:2ad501942596de1a53e9339284635a712346a245 [weak] - MD5Sum:a7dc1e7a3ff05af314e49c0b841ce240 [weak] - Filesize:112140 [weak] Hashes of received fil…

• 0

  Reputation Points

• 1 reply
• 1.7k views

Werner

October 27, 2025Oct 27

I was running on Armbian_23.02.0-trunk.0112_Orangepi5_jammy_legacy_5.10.110_cinnamon_desktop. For the most part, it worked but the mouse cursor would randomly disappear while remaining functional but invisible. I tried to upgrade using apt-get update and apt-get full-upgrade and after a reboot, it now just displays a flashing underscore. I can SSH into the OS so it's partially functional. Shows as Armbian 23.02.2 Jammy with Linux 5.10.110-rockchip-rk3588 Contents of boot.log: ------------ Mon Feb 27 07:24:15 PST 2023 ------------ done. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. Begin: Running…

• 0

  Reputation Points

• 1 reply
• 1.9k views

Werner

February 27, 20233 yr