Amlogic meson
Quick links to search tags:
Banana Pi CM4-IO, Banana Pi M2S, Banana Pi BPI-M2 Pro, Banana Pi M5, JetHub D1, JetHub H1, Khadas VIM1, Khadas VIM1S, Khadas VIM2, Khadas VIM3, Khadas VIM3L, Khadas VIM4, La Frite, Le Potato, Sweet Potato, Odroid C1, Odroid C2, Odroid C4, Odroid HC4, Odroid N2/N2+, Radxa Zero
-
I got the Le Potato Ubuntu server image up and running. Then installed the Mate desktop environment. Most everything is working fine, but the system freezes hard at times, mostly when I try to run several large programs concurrently. Problem with memory? Also, some resolutions have the refresh rate set at 68.5 Hz that don't work on most of my monitors. Anyway, just wanted to say thanks for the work you guys put into it, and I look forward to the continuing progress!
-
Reputation Points
- 59 replies
- 25.1k views
- 4 followers
-
-
Good Morning, I would like to Power ON or Wake the Board by IR Remote. However I cannot find instructions anywhere on how to enable the IR wake or what the code is for wake etc. Can you please point me in the right direction? From: https://loverpi.com/blogs/news/first-look-at-libre-computer-board-aml-s905x-cc-le-potato-hardware-overview it states: IR Shutdown works but then I cannot wake the board by IR. Thank you for any help and for all the time the developers donate to this. Much appreciated.
-
Reputation Points
- 18 replies
- 13.1k views
- 1 follower
-
-
I have two Le Potato boards (http://ix.io/2ykP http://ix.io/2ykN), I installed Armbian Focal on them. One of the board has defective HDMI (board from Kickstarter?), it has no HDMI output. Other board was ordered from Amazon, a year later. It has HDMI output but colors are not right (white is green, black is purple, etc, HDMI image is not nice but it is usable; it is interesting that when I use HDMI to VGA adapter, colors are right; when board runs in low resolution, colors are right on HDMI too. But when resolution is high, 1950x1200, then HDMI colors are wrong - I swapped HDMI cable without any effect - is this known video driver issue??). So because only one…
-
Dear all, first, as being new here: Many thanks to all the work that went into this! Now, here's my problem on Le Potato, which I have with armbian and LibreELEC: As soon as I copy anything large to any media, some services (SSH, Samba, Kodi, tvheadend - all of them network dependent) crash after writing something between 200 and 700 MB - not always at the same point. So anything like cp /some/huge/file /home/me crashes the services. Something like this: cp /some/huge/file /dev/null is no problem. I tried writing to SD as well as to USB, and I tried via network (scp from another machine into Le Potato…
-
Reputation Points
- 12 replies
- 6.7k views
- 1 follower
-
-
Hello, i've tried the actually armlogic Image for my six le potatos. (https://dl.armbian.com/lepotato/Ubuntu_xenial_next_desktop.7z) In the first step it looks ok. But then i found you, that there is missing a xfs Module. I need this for a ceph test deployment. After some research i found out, that you can compile you own kernel with this description: https://docs.armbian.com/Developer-Guide_Build-Preparation/ I tried it and copy the kernel to the le potatos. But then a lot of strange things happens. Some of them where starting, some not, and when they started after some time the whole system brokes (looks lik…
-
Reputation Points
- 8 replies
- 5k views
- 1 follower
-
-
Just wanted to show off a bit of awesomeness! (Please excuse the dust)
-
I want to use a StromPi3 board with my lepotato board. I am using the armbian image. I used armbian-config to enable the serial ports and both show up as /dev/TTYAML0 and /dev/ttyAML6. Nonetheless I am unable to communicate on the serial ports even when connecting jumpers and a USB serial converter. I later tried to modify the divorce tree by hand. No change. Is there something else I could try to get the serial port on pins 8 and 10 working?
-
Reputation Points
- 0 replies
- 2.2k views
-
-
I am trying to use the s905x on the Le Potato board to encode a 1080p video to stream via RTSP. Using software, the video is encoded anywhere in between the 5-7fps range. I want to use the hardware encoder that is available on the chip but I haven't been able to find any libraries that let me use the hardware on this specific board. I have tried installing the Mali-450 GPU drivers here (https://wiki.debian.org/MaliGraphics) but no luck.
-
I know there is a template, but this board is already on the download page as unsupported, just ran a group of tests on it after building a full desktop image, I think we can move it to supported without any issues, the S805X is the same as an S905X with some things turned off, like comparing an H3 and an H2+. Pros: SPI contains u-boot, we don't have to do anything with that. Libre Computer updates the firmware periodically (available on their site) already supports USB boot, etc, and has a "press escape for menu" option, making it very difficult to brick. UMS mode is menu selectable (I feel like we need to look at this. I hav…
-
Reputation Points
- 3 replies
- 5.5k views
- 1 follower
-
-
Placeholder for Libre Computer La Frite general topics Marked "Supported" as of Nov. 24, 2019 Reference pages: https://libre.computer/products/boards/aml-s805x-ac/ https://forum.loverpi.com/categories/libre-computer-aml-s805x-ac https://drive.google.com/file/d/1Dl3lLTs407OZ7HhPYjjlvDX2_FPfKHMr/view
-
Reputation Points
- 0 replies
- 6.8k views
- 1 follower
-
-
After I shutdown Libre Sweet Potato, the whole network is somehow brought down unless I remove prower from the sbc. Any thoughts. Thanks
-
Reputation Points
- 1 reply
- 1.9k views
- 1 follower
-
-
bananaoi-m5, Armbian 25.8.1 bookworm installed I can login via ssh as first user, gene, and sudo -i just fine. Buuuttttttt, at reboot the local screen ask's for the pw for amandabackup, a user lock down tightly which has never had a pw assigned. as its intended to be pw--less for the amanda backup system. What miss-configure can cause this????? Also I ordered 2 more of the keyboard/mouse combo''s which are the same as I'm using with a similar install for klipper running a 3d printer, but the dongle doesn't init when plugged in ack dmesg output, refusing its on discovery assigned address. So no keyboard/mouse is locally possible. I'll unpack the 2nd identical…
-
Here the workaround to get a "gdm" login screen: root@ password: _ _ _ /_\ _ _ _ __ | |__(_)__ _ _ _ / _ \| '_| ' \| '_ \ / _` | ' \ /_/ \_\_| |_|_|_|_.__/_\__,_|_||_| v25.11.2 for Khadas VIM3 running Armbian Linux 6.12.58-current-meson64 Performance: Load: 25% Uptime: 4 minutes Local users: 3 Memory usage: 8% of 3.68G CPU temp: 38°C Usage of /: 11% of 58G RX today: 920 MiB Tips: Armbian config utility https://tinyurl.com/yc3…
-
Hi everyone, I'm experiencing a severe boot delay on my Banana Pi M5 running Server Armbian Image (v25.2.2 - Banana Pi M5 - Armbian Linux 6.12.21-current-meson64) when no HDMI monitor is connected. The board itself is working fine, but without an HDMI connection, the system takes several long minutes to complete the boot process. Details The system boots normally and quickly when an HDMI monitor is attached. However, without a monitor, in headless mode , the boot process is significantly delayed several minutes (approx. 4 minutes). Blue led blinking normaly. I've Tried modified /boot/armbianEnv.txt by setting: display_autodetect=fals…
-
Reputation Points
- 10 replies
- 4.8k views
- 3 followers
-
-
After updating the edge kernel to 6.18-rc, the performance of my ODroid-N2 dropped drastically. Here are the performance test results of 7zip with different kernel versions for comparison I compile the kernel myself using the armbian build system and install the resulting .deb. '7z b' 7-Zip 23.01 (arm64) : Copyright (c) 1999-2023 Igor Pavlov : 2023-06-20 64-bit arm_v:8 locale=en_GB.UTF-8 Threads:6 OPEN_MAX:1024 Compiler: 13.2.0 GCC 13.2.0 Linux : 6.16.6-edge-meson64 : #1 SMP PREEMPT Tue Sep 9 17:02:41 UTC 2025 : aarch64 PageSize:4KB THP:always hwcap:8FF:CRC32:SHA1:SHA2:AES:ASIMD LE 1T CPU Freq (MHz): 1901 189…
-
Reputation Points
- 9 replies
- 3.4k views
- 1 follower
-
-
with ccrypt and cryptsetup installed creation of a luks fs fails. Even gparted shows this in file system support window. OS Version: Linux w1 5.6.18-meson64 #20.05.4 SMP PREEMPT Mon Jun 15 01:50:20 CEST 2020 aarch64 aarch64 aarch64 GNU/Linux
-
Reputation Points
- 0 replies
- 2.6k views
- 1 follower
-
-
Good morning everyone. My problem is that I had armbian installed in emmc and using armbian config I changed it to usb but I did not update the boot to sd and when I restart it only shows what I put in the photo and it remains black. Is there any way to fix it. By pressing reset with the HDMI unplugged it tries to start but stays in initramfs. Thank you
-
Hello, I know this is a forbidden question, I will adress specially to @chewitt and @Igor. Why I dare to do this? Because today, it is the fist time I managed to run Libreelec (LE) nighly https://test.libreelec.tv/11.0/Amlogic/bananapi-m5/ and have the somehow the same suffering with boot and so on and as I did not give up, I shot the last bug preventing LE to boot. I don't want to register in every forum for each pack , christian forgive me I will put the explanation here. The last image suffer from a missing link..in /flash as it is all momified in squashfs , this need extra skills. wget https://ftp.halifax.rwth-aachen.de/libreelec/L…
-
Reputation Points
- 4 replies
- 4.6k views
- 1 follower
-
-
I use mali kernel drivers from Neil https://github.com/superna9999/meson_gx_mali_450/tree/DX910-SW-99002-r9p0-01rel0_meson_gx All works just fine with 4.19 but it don't work with 4.20 it looks like there is some problem with memory allocation in this https://github.com/superna9999/meson_gx_mali_450/commit/2c9bd8ae57c0648045f7eaa48c120ec78db85d10#diff-2c0ef6f7db02daf8ed563376e846b873R312 Any idea?
-
Reputation Points
- 1 reply
- 3.5k views
- 1 follower
-
-
Hello everyone, Upgrading from distro isn't supported officially but I tried it anyways and thought I should share my findings. In short, it worked for me. Others have reported issues so maybe we can figure out what causes these issues. My N2+ is fairly vanilla, so I didn't heavily modify it. Running 5.10.x kernel since that is recommended for de N2+ Step 1. Fully upgrade your system on Focal sudo apt-get update sudo apt-get upgrade sudo apt-get dist-upgrade Step 2. Shutdown you N2+ and make an image backup of your emmc using dd or Win32DiskImager in case something goes wrong Step 3. Boot up your N2+ a…
-
Reputation Points
- 7 replies
- 11.3k views
- 1 follower
-
-
On the page https://www.armbian.com/bananapi-m2s/ I tried to download the Bookworm XFCE build at the link https://redirect.armbian.com/region/NA/bananapim2s/Bookworm_current_xfce but that link gives a 404 error. EU mirror worked. Where should I report this?
-
Hi, A Firefox configuration file seems missing in Lepotato images derived from Debian because a failure message is raised after starting Firefox. A firefox.conf file should be placed in /etc/armbian . An issue has been raised in the geckodriver repository of github.com/mozilla giving more details: https://github.com/mozilla/geckodriver/issues/2167
-
Reputation Points
- 2 replies
- 3.3k views
- 1 follower
-
-
Hi I installed Armbian_community_26.2.0-trunk.151_Odroidhc4_trixie_current_6.18.2_minimal.img Trying to build zfs-dkms I discovered that I was missing the linux-headers for this kernel version and there is no package containing it. At least apt-cache didn't find anything. Any idea where to find it? Thanks, Chris
-
Hi everyone! For about a week now, I have been using armbian 22.11.1 on my new Odroid HC4, which is my Nextcloud server. As alway, armbian is rock solid 😉 I have just a little question: Can one modify the information presented in htop? I'd like to have "CPU temperature" and "TX today" (meaning sent bytes) showing. The welcome screen already shows "CPU temperature" and "RX today". I know that the CPU temperature can be read here /etc/armbianmonitor/datasources/soctemp and but I can't find it in the htop-configuration under "available meters".
-
Hi, I upgraded armbian on N2+ today... Apparently kernel was updated, I dont know how to fix this. Someone to help me ? Thanks
-
So, I've noticed there were some updates available, so decided to do so, now running 20.08.7 Focal / 5.8.13 kernel. Now, I did run the nand-sata-install when I first installed armbian a month ago to an external SSD and all's working perfectly. The thing is, a couple of weeks ago, even after this latest update and rebooting, the sbc won't boot up, I had to pull the plug and back about 20 times for it to boot. So this is what I found running dmesg. [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034] [ 0.000000] Linux version 5.8.13-meson64 (root@xeon) (aarch64-none-linux-gnu-gcc (GNU Toolchain for the A-profile Architecture 9.2-2…
-
Reputation Points
- 1 reply
- 4.1k views
- 1 follower
-
-
Hi everyone! Been using Armbian for a few days and loving it!! Banging job! I'd like to ask though, is there a way to change the threshold for when the fan kicks in on the N2+? As it's hardcoded to 65C correct? Thanks!
-
Reputation Points
- 28 replies
- 12.7k views
- 2 followers
-
-
X windows system on term 7. turns black and then the Monitor goes in Power Saving modus. But the others terms still work ( not 100 percent sure ). Strangely enough that this happens only shortly after switching on. But if I cut the Power or reboot then it will run 24 hours or longer. Haven't tested more than 24 h. I recognize that late that I could switch to other terms i.e. term 1. At first I thought that the N2+ was under powered and tried another PSU but later I saw that only X window system on term 7 has crashed. Music per bluetooth continued playing. What I did was making updates before it happening.
-
Armbian current: It seems that the N2+ is [i]immune[/i] to Chrony and systemd-timesyncd. The only way I can set the date/time is manually through date -s. # systemctl status systemd-timesyncd ● systemd-timesyncd.service - Network Time Synchronization Loaded: loaded (/usr/lib/systemd/system/systemd-timesyncd.service; enabled; preset: enabled) Active: active (running) since Mon 2025-11-24 13:06:59 PST; 31min ago Invocation: 50da85c1116348dbbd83cca270da6ff8 Docs: man:systemd-timesyncd.service(8) Main PID: 1185 (systemd-timesyn) Status: "Idle." Tasks: 2 (limit: 4227) Memory: 1.6M (peak: 2.3M) CPU: 79ms C…
-
VIM2 responds to pressing the function button three times, with the blue LED blinking briefly, but after that nothing happens. The only thing that worked was connecting via UART and after resetting I got this (see screenshot). Where, in addition to the lack of loading, this line confuses me DDR3 chl: Rank0+1 @ 912MHz - FAIL Apparently, I have a problem with u-boot, and maybe a hundred more. I would like to get advice on which direction should I move? In advance, thank you very much to everyone who responded!)
-
I had my banana pi M5 installed with Armbian 24.11.1 Noble Gnome. I had trouble with the wifi dongle which is TP-Link (RTL8188 skew) product. The system detects no wifi adapter after booting or reboot, however, it can be detected after a hot-plug (remove then plug) action. How can I solve the problem? Thank you all.
-
As of 2025-12-01, current 'Armbian 25.11.1 Trixie Minimal / IOT' lists as 'Kernel: 6.12.58, Size: 505 KB, Release date: Nov 22, 2025' and seems to have had problems on image generation. Please check when possible. Thanks in advance, pbg
-
Reputation Points
- 8 replies
- 3.6k views
- 1 follower
-
-
Just a warning for everyone, the new kernel update (6.18.xx I think?) absolutely wrecks the system (atleast it does on Ubuntu Noble). It doesn't boot at all anymore I needed to recover an old kernel from an old backup I had and overwrite the current kernel from rescue mode/petitboot. Kernel 6.12.xx seems to work fine(ish) Just a heads up because I don't know enough to pinpoint the exact cause. p.s. for me the kernel means the files in /boot not sure if I used proper terminology
-
Reputation Points
- 15 replies
- 3.2k views
- 1 follower
-
-
Good day! I have a Banana pi m2s with Amlogic A311D, 4GB RAM and 16GB emmc. Official images from Banana pi work on this device (both emmc and SD card). The problem is when I try to install Armbian on SD card - using BalenaEtcher on Windows / Disk tool on Ubuntu Mate: - the m2s either doesn't boot (when Armbian is written on emmc memory) - or m2s boots from emmc storage (when Armbian is written on SD Card) SD card has boot priority over emmc and works fine with official .img from bananapi. I see all written files on SD card after using Balena Etcher. The difference from official images is that boot folder in official …
-
Reputation Points
- 4 replies
- 3.4k views
- 1 follower
-
-
I'm trying to get Cinnamon to work with my Le Potato and have had no success. I don't know what data is needed to troubleshoot this so please let me know what info you need. Here are the details that I have. Le Potato AML-S905X-CC-V1.0-A I've tried two different methods to make this happen. Method 1 I tried installing this image: Armbian_24.8.1_Lepotato_bookworm_current_6.6.47_cinnamon-backported-mesa_desktop.img.xz Method 2 I tried installing this image: Armbian_24.8.1_Lepotato_noble_current_6.6.47_gnome-kisak_desktop.img.xz and then tried installing Cinnamon with apt. In both cases, wh…
-
Reputation Points
- 8 replies
- 6.5k views
- 1 follower
-
-
After updating my Odroid N2+ today, lo is the only network interface shown when running 'ip a' The update was 18 packages: root@odroidn2p10:~# apt upgrade Reading package lists... Done Building dependency tree... Done Reading state information... Done Calculating upgrade... Done The following packages will be upgraded: armbian-config armbian-firmware armbian-zsh libldap-2.5-0 libldap-common libnss-myhostname libpam-systemd libsystemd0 libudev1 linux-dtb-current-meson64 linux-image-current-meson64 linux-u-boot-odroidn2-current python3-tz sudo systemd systemd-sysv tzdata udev 18 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. Need to g…
-
Reputation Points
- 3 replies
- 4.4k views
- 1 follower
-
-
Hi! Recently I've tried Armbian 22.11 Jammy for my banana Pi M5. Initial setup without any error message. When I do the speaker-test but no sound output. Can I know how to add the sound card driver into the OS? Thanks
-
Reputation Points
- 10 replies
- 9.7k views
- 1 follower
-
-
Hello, I want to have the GPU mali integration so I choose Armbian kernel 5.4 But there is no sound l. The command aplay -l not list any hardware. And no sound on HDMI An idea ? If I must choose another image can you tell me the good image ? And can I will keep the bifrost wayland integration ? Thanks a lot.
-
Reputation Points
- 3 replies
- 4.4k views
- 1 follower
-
-
Currently no /dev/watchdog device on N2 with -current and -dev armbian kkernel. But watchdog present in -legacy. I see meson-wdt kernel module present on image, I transplant meson_wdt segment from dts file of legacy kernel to dev and current. diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts index 819afc748828..18990208f269 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts @@ -226,6 +226,20 @@ hdmi_connector_in: endpoint { }; }; }; + + wdt: watchdog@0xffd0f0d0 { + compatible = "amlogic, meson-wdt"…
-
Reputation Points
- 2 replies
- 4.1k views
- 1 follower
-
-
This post is not a criticism but I suppose that noobs with experience with linux since 2006 like myself might get caught out by: * Desktops are very simple and minimal but containing standard features such as Chromium, Firefox browser, Office tools etc. This Ubuntu based "noble" distro DOES NOT have any browser installed as part of the image. Since I rarely use snaps, as they are controversial, I did not understand at first that "synaptic" will not install Firefox or Chromium. In fact you have to use the CLI terminal to manually install Firefox or Chromium with the "snap" program. May I suggest that the webpage description be amended to:…
-
Reputation Points
- 1 reply
- 1.9k views
-
-
Hi there, yesterday I tried to use nand install skript tool to move the content from my sd card on odroid n2 to emmc card for booting and using emmc card only. The process itself worked and the content of the sd cards was moved, but after unplugging sd card and plugging emmc card the boot process is not starting and nothing is shown on the hdmi monitor. I compared the /boot filesystems and both are identically. I checked the "armbianEnv.txt" file and it is ok for the new uuid of the emmc card. Everything seems to be identically but why is it not booting. Does someone have a hint what to check additionally what is maybe missing at beginning of the boot process.…
-
Reputation Points
- 25 replies
- 16.8k views
- 3 followers
-
-
Hi have two N2s (an N2+ and N2). Both are connected to a Viewsonic 2560x1440 2 HDMI ports monitor where they both work well. One system (N2+) is running Ubuntu 22.04 the other is running Armbian jammy 22.04.01 Kernel 6.0.13 #22.11.2. I have purchased a ATEN CS22H 2 port HDMI/USB KIVM switch. When I connect both systems to the monitor via the KVM I only get a picture from the Ubuntu system. The Armbian system is always black. Can I force the kernel/firmware to be 2560x1440x60hz. I was looking at this post : Regarding forcing the kernel to be a fixed resolution but wasn't sure it was relevant. …
-
Hello, I've tried to use the bug reporting tool but unfortunately it did not work (armbianmonitor -u did not work, and it was too big for http://paste.debian.net/), so I've posted here. I'm trying to use a PCTV 292e plugged into the USB2 port of my Odroid N2. I have the correct firmware for this device downloaded into the /lib/firmware/ folder however I have the errors: writing to i2c device at 0xc8 failed (error=-5) I think it is a USB issue as it does work in the USB3 ports, but I am unsure. Logs below. If there is any more info I need to supply please let me know. Thanks. armbianmonitor -U 1 2 ### Act…
-
Reputation Points
- 0 replies
- 8.1k views
- 1 follower
-
-
I have two Odroid C2s. One I have been using as NUT server for Eaton UPS. Today NUT clients report no connection. What seems to be the problem is the C2 (this happens with both, same SD card) are not seeing devices plugged into USB ports so the USB connection to the UPS is not working. I have verified the Eaton and USB cable are fine. I regularly update the C2 I wonder if a recent update has affected the USB port functioning? Any way to troubleshoot? I tried a few USB flash drives and then lsusb but none are seen.
-
Reputation Points
- 1 reply
- 2.5k views
-
-
Hi, I downloaded the jammy xfce image for ODROID C2 today: MD5SUM 033fbc0babb56db5388b4c707a2fc0ce Armbian_23.11.1_Odroidc2_jammy_current_6.1.63_xfce_desktop.img.xz After flashing it onto my SD card with xzcat and dd, I tried to boot with my Odroid C2 ending up with this error message: ALERT! UUID=75e23441-f5ee-4479-a484-7060ccd898ae does not exist. So I put the SD back into my PC and checked with gparted: the UUID of the partition that I have on my SD card seems to have exactly the UUID that was not found. In fact the boot until that error message lastet quite long, so I expect that the…
-
How to configure headless similar to the instructions in HardKernel's Wiki? https://wiki.odroid.com/odroid-xu4/application_note/software/headless_setup?s[]=headless#change_resolution_in_xorgconf I'm guessing the device is different?... Also what wold be the rest of the xorg.conf settings? The wiki page only shows the part that should be modified. Thanks.
-
Reputation Points
- 0 replies
- 4.9k views
- 1 follower
-
-
Hi, I tried to migrate my odroid C2 form corelec to armbiam bookworm 6.1.6.63... but i'm having some problems with network... i need to fix on switch the limit bandwith at 100mb/s even impossible to have network... When it's ok, if i tried to force config with ethtool (network freezes everytime)... and in every case, after some hours.. the network freeze.. So i'm looking for an armbian with a good stability and not too old.. Regards,
-
I tested the latest available Armbian image (minimal installation) on my odroid C2 via SD card. have available an 16gb hardkernel emmc card on which I had ubuntu 20.04 installed and running. But by burning the image with etcher (the same procedure as with the SD image) the odroid is unable to boot. Black screen, solid red led, and nothing else. I waited more than 30 seconds, I tried to disconnect keyboard....I waited more than 30 seconds, I tried to disconnect keyboard I have repeated the procedure through the SD and it works correctly. When I do it through the emmc, the system does not boot. When I use the SD card, the Emmc card is ob…
-
I've tried a few images of the latest builds. None of them start. Odroid starts to power the screen and I see blinking lights, but screen goes dark and it seems to cycle like this. I use USB power for it and a powered hub (so basically no power output to USB dongles, etc.)
-
Reputation Points
- 15 replies
- 11k views
- 2 followers
-
-
hy guys is it possible to boot the odroid c2 from usb? so i can connect a ssd (M.2 SATA) via usb connector and use this. thank you
-
Hello, after upgrading the Odroid C2 to the current Version on 16.08.2024 the USB-devices do not work at all. According to the diagnosis information they are recognized during during bootup. But later they are disconnected for an unknown reason. https://paste.armbian.com/jucovipaxo lsusb only lists two devices: Bus 001 Device 002: ID 05e3:0610 Genesys Logic, Inc. Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub The suggested hack "usbcore.autosuspend=-1" for USB-problems is already activated, but USB doesn't work anyway Maybe there is a solution for this strange behavior of my C2.
-
(Sorry this tagged as C2 since C4 tag not available) - Not trying to ruffle any feathers mentioning dietpi. I have an Odroid C4 with petitboot on sd for booting os's. I have a couple usb3>sata cases with 120g ssd's installed. Blazing fast and about $25usd 🙂 I can then download images and write them to the drives. Dietpi 9.11 and using the netboot function builtin to petiboot a few different flavors of other os's including debian 12. I have Armbian on SD as well. My problem is that it is incredibly slow running from sd on my c4. It runs VERY WELL though and detects audio properly on my tv through hdmi (shows as unknown display). W…
-
Reputation Points
- 2 replies
- 3.5k views
- 1 follower
-
-
Hi, after a long time I started up my C4 and tried both the standard download kernel as well as a home compiled one. I need SPI on the C4, so I changed the device tree to meson-sm1-odroid-c4-spidev.dtb, and see spidev kernel modul loaded, but no driver, and I don't get any signals on the corresponding pins. Any help is appreciated - would be great to have SPI working again... See you, Michael
-
I have a Odroid C2 that was being used as a TV box with Coreelec, and has now been retired due to upgrade. I want to repurpose the C2 for a completely different role, so I am trying to install Armbian in it. I downloaded the Armbian image from here and followed the official install instructions, but the C2 refuses to boot. The red light turns on when powered but nothing more happens, no other lights, no screen, nothing. Coreelec was booting with no issue, so it must be something I'm setting wrong. Just in case I tried a different SD card and two different images, Bookworm minimal (the one I'm interested in) and Ubuntu Noble XFCE (just to test). Sam…
-
Reputation Points
- 2 replies
- 3.2k views
- 1 follower
-
-
Hi guys, I installed the latest Armbian (Buster) release for my Odroid HC4 and - after getting rid of Petitboot as that just wouldn't let me boot the image - it's working great so far. Only big problem I have is that it does not recognize any SATA devices, in neither of the two slots. I tried different HDDs / SSDs that I verified are recognized on a Windows PC and another Ubuntu PC. Did anyone get that working already? I assume the required Kernel drivers for the PCIe-Sata-chip are probably still missing. Many thanks and best regards Daniel
-
Reputation Points
- 16 replies
- 14.4k views
- 1 follower
-
-
Hi all How can I enable the rtc clock in the Odroid HC4? I know nothing about device tree and overlays, but the Hardkernel Ubuntu image has an overlay to enable: wiki. I didn't find anything similar in the armbian image. Could be related to this this PR for the N2 model? Thanks
-
Reputation Points
- 6 replies
- 8.5k views
- 1 follower
-
-
I recently installed the latest precompiled Bullseye image on my Odroid HC4 and plugged in two Samsung 870 QVO 8TB SSDs. After configuring the system I noticed that they were not present, checking output from `/var/log/syslog` I can see the "SATA Llink down" messages for both channels. After several reboots I tried seating them after booting, both drives cause some messages about a soft reset failing, then eventually within 30-60 seconds are recognised until I reboot. I then one Crucial MX500 4TB SSDs which was recognised at first, after some reboots it would no longer be present, or strangely, be present with a much lower capacity (1TB). When seating the d…
-
Reputation Points
- 11 replies
- 6.7k views
- 1 follower
-
-
I found an old post from 4 years ago about this: odroid hc4 wake on lan wol Just curious if anyone has a solution? Thanks for any help
-
Reputation Points
- 0 replies
- 983 views
- 1 follower
-
-
Is there any way to enable Wake on Lan? As far as I know the Odroid-HC4 Supports WoL but I can't get it to work
-
Odroid N2 Thanks for this one, I am able to use Palemoon and banish Chrome, it is gone. I cannot change the blue light to 'sd', sudo sed -i '1 i #!/bin/sh' /etc/rc.local sudo sed -i -e 's/exit 0/#exit 0/g' /etc/rc.local sudo sh -ce "echo 'echo sd >/sys/class/leds/n2:blue\:heartbeat/trigger' >> /etc/rc.local" sudo sh -ce "echo 'exit 0' >> /etc/rc.local" sudo chmod +x /etc/rc.local just dont work. I would like to have 1024x600 display but MATE control panel / display overrides boot/boot.ini. Stuck with 1280x960 as the lowest wide screen display. 1280x800 is a bit off the screen at the button of the screen and a …
-
Hello, I was running OpenMediaVault on Armbian Buster some time ago and after an update (I suppose) the system would not boot normally anymore. Had to move places shortly after that, so the board stayed in a box for about a year and now I would like to put it back into service. A Bullseye image is required for OMV 6, so I went to the website and downloaded the latest image for my Odroid N2 board : Armbian_23.02.2_Odroidn2_bullseye_current_6.1.11.img.xz I then flashed the 16GB eMMC and plugged it in ... no boot (fixed red led / no network) If I do the same with an SDCard, it boots up normally (blinking blue led / working SSH) …
-
Reputation Points
- 2 replies
- 4.1k views
- 1 follower
-
-
Installing Bullseye from download list works fine, but after `apt update / apt upgrade` or a firmware update through armbian-config, boot process gets stuck with Uboot logo in the corner and won't proceed any further. Any ideas? Using a EMMC card and BalenaEtcher to burn.
-
Reputation Points
- 4 replies
- 4.1k views
- 2 followers
-
-
Good morning, after some time using armbian on my OdroidN2 with great success (got Nextcloud with working Talk installed, external USB, Minecraft server, nginx, LetsEncrypt, Netdata...) I encountered some problems I am not able to solve by myself: I bought a RTC battery and a LED power button to "finalize" my Odroid (hardwarewise), and to my surprise both did not work as expected. RTC: It says: chris@OdroidN2:~$ sudo hwclock hwclock: select() to /dev/rtc0 to wait for clock tick timed out cat /proc/interrupts |grep rtc ...gives me also no return (empty string), so i guess there is a module missing in the kernel : chris@Odroi…
-
Reputation Points
- 11 replies
- 9.8k views
- 3 followers
-
-
I have big problems with the network throughput on my odroid n2 after a new fresh installation of the armbian image 5.87_debian_stretch_default_4.9.177. I was wondering why the update procedure with apt or some tests with installation for omv is taking so long. Does anyone has the same problems or some hints for solving this? So for know I - switched the network cable (no result and with the same cables different other computers are connected with gigabit and no problem - changed speed from 1 gbit to 100 mbit but with no successfull result on the lan switch (no problems with all other connections on this hp lan switch!) - did some small "…
-
Reputation Points
- 12 replies
- 10.5k views
- 1 follower
-
-
I am having trouble installing specific hardware dkms because the dkms requires the linux header files for the installed kernel version which are not available or do not exist. Armbian 23.05.1 Ubuntu 22.04 desktop version is build with kernel 6.6.63 but an apt search for the relevant headers finds none. Headers exist for 6.2, 6.5 and 6.8 but not for 6.6. How can I address this?
-
Reputation Points
- 5 replies
- 4.8k views
-
-
I'm trying to use a Pixel Qi screen with Odroid N2 running armbian. I've made EDID file myself and had it set in armbianEnv.txt like this: edid=0 disp_mode=1024x600 extraargs=drm.edid_firmware=edid/qi.bin But in nowhere it's loaded by the system.
-
I've been trying this all day and I can't get it to work for me (focal mainline kernel 5.6.y) - I can start on sdd, change hostname, make it a static ip, reboot - works fine. As soon as I try to nand-sata-install and boot from sdd + system on usb it just disappears after the reboot. Pity, works fine with the legacy.
-
Hi i've tried everything now and really out of options and almost out of hair..... Hardware: 32GB or 256GB Samsung EVO Plus Sd-Card 500GB Samsung USB SATA SSD (MU-PA500B) Odroid N2 with the latest petit boot All images with kernel 4.9 will boot straight of the SSD without a problem or much work. But when i try images anything above 4.9 it won't boot , whatever i do: What have i tried with the images with kernel 5.4X 1) Image straight to SSD Black screen nothing happens ( SPI or MMC mode makes no difference) 2) Image on Sd-card, boot into Armbian and use :sudo armbian-config * System --> Install - installs to SATA, eMMC, NAND or USB -->…
-
Reputation Points
- 11 replies
- 13.3k views
-
-
Sometimes when reboot device goes to emergency mode and you can not connect to it remotelly. I read on internet, may be here, that make this [Firmware Bug]. I downgrade Kernel to "Igor" recommended 5.7.15 and there the [Firmware Bug] missing. I tested new and newest Kernel via armbian-config but the [Firmware Bug] is present everywhere. Kernel 5.7.15 seems good without this bug but i have no sounds on Audio out or via HDMI. --- journalctl -xb [Firmware Bug]: Kernel image misaligned at boot, please fix your bootloader!
-
I'm not sure what is the cause and effect here, but what I saw today is weird. OS: Welcome to Armbian buster with Linux 4.9.219-meson64 Linux odroidn2 4.9.219-meson64 #1 SMP PREEMPT Wed Jun 3 12:42:50 CEST 2020 aarch64 GNU/Linux Symptom: I recently purchased a Seagate external HDD and wanted to use it with the N2. Started to replicate files from my other server over SFTP, and at the same time I also started Midnight Commander to check on the HDD content. As soon as I wanted to change directory to /mnt/seagate, my console became unresponsive, the SFTP connection failed and there wasn't really any way to unstuck this situation. Due to othe…
-
I am trying to build a compute cluster from Odroid N2. But seems like the core 5-6 does not speed-up the application at all. And the speed up is also not linear along the cores. Here are some measures from my MPI based application. I measured a total calculation time for a function. 1 core 0.838052sec 2 core 0.438483sec 3 core 0.405501sec 4 core 0.416391sec 5 core 0.514472sec 6 core 0.435128sec 12 core (4 core from 3 N2 boards) 0.06867sec 18 core (6 core from 3 N2 boards) 0.152759sec I am using the Armbian Focal mainline kernel 5.6.y image. Does it need any special configuration to use the Dual-Core Cortex-A53 C…
-
After an update to Armbian 23.05.1 Ubuntu one of my Wifi adapters no longer sees any access point and can't be forced to connect blindly. The two adapters are very similar: The two adapters are very similar: Working Wifi Module 5B: |__ Port 2: Dev 9, If 2, Class=Vendor Specific Class, Driver=rtl8821cu, 480M ID 0bda:c820 Realtek Semiconductor Corp. /sys/bus/usb/devices/1-1.2 /dev/bus/usb/001/009 Not working Wifi Module 5A: |__ Port 4: Dev 10, If 0, Class=Vendor Specific Class, Driver=rtl88XXau, 480M ID 0bda:a811 Realtek Semiconductor Corp. RTL8811AU 802.11a/b/g/n/ac WLAN …
-
Reputation Points
- 0 replies
- 2.2k views
-
-
Hello all, I am using an Odroid N2 with a 16Gb emmc and Armbian Bookworm. However as this got a bit small, I installed Armbian Bookworm to a new 64Gb emmc (Armbian is installed on an SD and can then be copied/installed to emmc). This seemed to work fine, and I had a running system. However, on the 3rd or 4th reboot, I got the error that the file "boot.scr" wasn't readable. With that, the emmc was not bootable anymore. I reinstalled multiple times, and each time, the emmc would work for a 2-5 boots, but no more. Each time, i got the error as above, or the error as below (partition could not be found) I never had this issue with the 16Gb emmc? Does anyone …
-
Reputation Points
- 15 replies
- 8k views
- 1 follower
-
-
I downloaded the most recent armbian focal for odroidc2. uname -a Linux odroidc2 5.6.18-meson64 #20.05.4 SMP PREEMPT Mon Jun 15 01:50:20 CEST 2020 aarch64 aarch64 aarch64 GNU/Linux However, linux headers are not available for this version: apt-cache search linux-headers-current | grep meson64 linux-headers-current-meson64 - Linux kernel headers for 5.6.15-meson64 on arm64 Also here, only 5.6.15 available: https://apt.armbian.com/pool/main/l/ I tried to simply use 5.6.15 headers by manually setting the following link: lrwxrwxrwx 1 root root 37 Jul 4 21:00 /lib/modules/5.6.18-meson64/build -> /usr/src/linux-header…
-
Reputation Points
- 4 replies
- 4.3k views
- 1 follower
-
-
Hello experts and members, Any possibility of multi booting armbian via petitboot from microsd card or usb or emmc in odroid n2 among other OSs.
-
Reputation Points
- 0 replies
- 1.2k views
- 1 follower
-
-
Hello, i need to activate the serial port on the odroid N2-plus, the serial port is on pins (J2 - 2x20 PINS) 8/10. Usually this uart with ubuntu is at /dev/ttyS1. If I try to use it on armbian I get an input/output error. I read the following post, I understand that it is not implemented yet. Can anyone point me in the direction of trying to do this?
-
Reputation Points
- 8 replies
- 6.3k views
- 1 follower
-
-
Hi Everyone, on my odroid n2+ _armbian 5.10.123-22.05.3 everything is fine but the system runs on a class 10 (uhs-i) sd card with very low speed... odroidn2:brontolo:# sudo hdparm -Tt /dev/mmcblk0p1 /dev/mmcblk0p1: Timing cached reads: 3440 MB in 2.00 seconds = 1720.27 MB/sec Timing buffered disk reads: 68 MB in 3.05 seconds = 22.28 MB/sec ...performance is better with an emmc card but my interest is if you can make settings to improve the access speed, I haven't found anything on the net..!! would that be too complicated !? 😁 thanks for the advices... greetings to all..
-
Reputation Points
- 0 replies
- 2.4k views
- 1 follower
-
-
Hi, the lastest kernel update issues the following lines in dmesg output: [ 12.214293] meson8b-dwmac ff3f0000.ethernet: Failed to reset the dma [ 12.215002] meson8b-dwmac ff3f0000.ethernet eth0: stmmac_hw_setup: DMA engine initialization failed [ 12.223988] meson8b-dwmac ff3f0000.ethernet eth0: stmmac_open: Hw setup failed Do I need to update the firmware as well? B.t.w. you may mention that armbianmonitor -u needs to be run as root, otherwise the fping check will fail.
-
Reputation Points
- 4 replies
- 6.9k views
-
-
Hi, in addition to this topic I would like to mention that the current Odroid N2 Firmware (Armbian 22.05.0-trunk.0004 Jammy with Linux 5.10.103-meson64 / U-Boot 2022.01-armbian (Mar 03 2022 - 19:25:51 +0000) odroid-n2/n2-plus) as well has difficulties with both the orange and the red coloured eMMC modules at this time. The orange coloured eMMC module is recognised but couldn't be activated ("unable to select a mode : -5"): Spoiler G12B:BL:6e7c85:7898ac;FEAT:E0F83180:2000;POC:F;RCY:0;EMMC:0;READ:0;0. bl2_stage1 bl2_stage_init 0x81 hw id: 0x0000 - pw…
-
Reputation Points
- 22 replies
- 15.6k views
- 3 followers
-
-
Hi all, Im having issues at booting on my board. Supported Buster version with kernel 5.10.y on Odroid N2(not plus), downloaded from https://www.armbian.com/odroid-n2/#kernels-archive-all From the UART connection I get the following logs that show kernel panics. odroidlogs2.txt odroidlogs1.txt
-
Armbian_22.05.4_Odroidn2_jammy_current_5.10.123_xfce_desktop.img ... comes up with the Armbian logo and circling dots... But the dots go on for an hour and a half. Here's what /var/log/bootstrap.log looks like.
-
Reputation Points
- 22 replies
- 8.2k views
- 1 follower
-
-
Hi all. I've recently received the Odroid N2+. Since nobody else started a topic about it, I'll be the one. All works fine with Armbian since not much hardware changes have been made vs the N2. Except for the CPU frequency. With the Odroid Ubuntu you can set it to 2.4Ghz for the big cores A73 as overclock (2208 stock)., and 2016Mhz for the A53 cores (1908 stock). With Armbian the max clocks are 2Ghz for all cores. Using Armbian Focal 4.9 legacy. I tried setting the higher values in config.ini. Also tried with the "meson64_odroidn2_plus.dtb" file from the Odroid Ubuntu. Doesn't boot with that. (What do I know ) Other changes are the RTC b…
-
Reputation Points
- 52 replies
- 45.6k views
- 2 followers
-
-
Minor annoyance, but wondering if there's a way to fix this on boot ? It's happened on all releases i've tried (emmc) enough of an annoyance now to ask about it. i've tried setting various resolutions in the boot.cfg but that doesn't seem to make a difference? connected via hdmi When I first turn it on I see this; Then it goes to this Then, i see normal dmesg and it's all usable.
-
Reputation Points
- 2 replies
- 3.6k views
- 1 follower
-
-
Install of Armbian 21.02.2 Buster with Linux version 5.7.15-meson64 and gpiod package installed on the Odroid N2 does not work for gpiomon. The gpiod command gpioinfo and gpioget work fine. Gpiomon fails with message "No such device". Searching for hours I believe the issue is that interrupts have not been assigned to the gpiopins, so appropriate devices don't exist. Any information on when/how to get a fully functional gpiod and associated python package going. Python code using python3-libgpiod also fails on the line.request function with the same "No such device" error.
-
Reputation Points
- 2 replies
- 5.2k views
- 1 follower
-
-
Hi all, after installing the latest version of Armbian (Jammy 6.1.11 desktop) I found that HDMI monitor audio is not working. With the Ubuntu MATE version of odroid the audio worked. Armbian seems more powerful and its look is much better than MATE, I hope I can solve all the problems because I don't want to go back to MATE anymore, How can I make HDMI audio work? Thanks in advance... PS. I have already updated the firmware to full with the WiFi USB stick problem which has since been resolved
-
Reputation Points
- 4 replies
- 7.2k views
-
-
Armbian boot logo shows and also on shutdown.... just doesn't want to display the desktop. Gnome desktop image. 6.1.50-current-meson6 #2 SMP PREEMPT Wed Aug 30 14:11:13 UTC 2023 aarch64 aarch64 aarch64 GNU/Linux
-
Hi Everyone, I'm trying to get audio out of my N2+ via SPDIF on the 7 pin header, or any gpio pin if necessary. So far I have confined my SPDIF output works with the official Odroid MATE image, and also that I can get audio out via the 3.5mm jack on armbian after flowing this post . I have tried to understand the amixer wizardry but no luck achieving anything so am a bit stuck as I would really like to use armbian over the Odroid image. Thanks for any help!
-
For the second time today on my few-days-old Odroid N2+ build with Buster desktop I have a system-wide freeze. Blue LED is constantly on and there is no response to keyboard or mouse events. Was interacting with Plex both times but I only have Plex, Tautulli and Samba server set up. I'm loath to pull the power but 30mins in to the second freeze (I pulled the plug on the first one). What should I be looking for when I get it running again?
-
Reputation Points
- 13 replies
- 5.5k views
- 1 follower
-
-
hello everyone, can anyone tell me how to install the driver for the RTL8811 WiFi USB dongle?
-
Reputation Points
- 3 replies
- 5k views
- 1 follower
-
-
Odroid-C2 (there was no adequate tag) After I upgraded my ssd install from 23.11.1 to 24.2.1, the board didn't boot. When starting 24.2.1 from a fresh sd card, usb and disk leds are on, and the board boots. But they don't show in lsusb. If I reconnect them after the board is booted, the leds stay off (and obviously they don't show in lsusb). Of course, booting from external ssd stops at some point, because usb is lost during the boot (when connecting a display, the failures start to happen on armbian services). Had to restore previous release 23.11.1 from backup on my ssd. Everything works again.
-
Reputation Points
- 4 replies
- 4.7k views
- 2 followers
-
-
I have an odroid-c2 with eMMC module flashed with Armbian_23.02.1_Odroidc2_jammy_current_6.1.14_xfce_desktop I have the following connected to the USB ports. 1) USB to audio headphone/microphone jacks 2) Wifi keyboard dongle The odroid-c2 is connected to an HDMI monitor with speakers I've been manipulating the settings for Pulseaudio and I could not get the audio to output to the monitor speakers. I could hear audio from the USB to audio jack connected to headphones
-
Reputation Points
- 0 replies
- 2.2k views
- 1 follower
-
-
Hello I tried to retasrt my system, but it doesn't work. Before i post my question i found this thread: i can't find a solution in the thread. Does anybody knows, how he fixed it? I need to restart the system. Can i disable the user login to the beginn? i need to start without a login choice. Thank you
-
Reputation Points
- 12 replies
- 6.3k views
- 1 follower
-
-
Hi, i have armbian bullseye (headless) installed on my odroid-hc4. petitboot is disabled. The boot-partition lies on a sd-card while the root-partion is on a ssd. this configuration worked fine. After upgrading to armbian bullseye 22.11 the boot process stucks in initramfs cause the root file-system is not found anymore (ALERT! UUID=xxx does not exist. Dropping to a shell. The sd-card with the boot partition as well as the ssd with the root-partition can be mounted on another PC and seem to be flawless. the UUID shown in fstab and initramfs are identical. In initramfs ls /dev/sd* shows no devices while ls /dev/mm* shows the sdcard (mmcblk01...). I don't really …
-
Board: ODROID-HC4 Images tested: Armbian_25.5.1_Odroidhc4_bookworm_current_6.12.28_minimal.img Armbian_25.5.1_Odroidhc4_noble_current_6.12.28.img Kernel versions tested: multiple (6.6.x, 6.7.x, 6.12.x) through armbian-config Issues observed: 1. No USB keyboard at boot I have tested with three different USB keyboards (all working fine on Debian/Ubuntu official images). 2. SATA not initialized → NAS functionality is broken Always get: ata1: SATA max UDMA/133 ata1: SATA link down (SStatus 0 SControl 300) ata2: SATA max UDMA/133 ata2: SATA link down (SStatus 0 SControl 300) Disks are never detected…
-
Reputation Points
- 2 replies
- 3.1k views
-
-
Has anyone updated their odroid-HC4 with the latest kernel and firmware versions? I am currently running Armbian 24.2.1 Bookworm with Linux 6.1.63-current-meson64.
-
From time to time, I notice that the HC4 looses its IP address. journalctl then tells me: dhcp4 (eth0): selecting lease failed: -131 But I don't know the reason for it. Sometimes it happens after a reboot. Pulling the ethernet cable off and plugging it in again seems to help and after a few tries, the HC4 is reachable again. I'd be happy to give more information, but I don't know yet how to debug it. I noticed that /var/log (zram) sometimes gets full but I don't know if this is related…
-
Hi I had to upgrade my Odroid N2 from Armbian Buster to Armbian Bullseye to run newer versions of Nextcloudpi (24.x). So I did the upgrade by writing the Armbian 22.05 version to the eMMC and started Armbian. Works fine. Then I installed a fresh nextcloudpi (23.0.2) which is the same version I used on Armbian Buster. Works fine. I added the external disks (ncdata und ncbackup). After a restore of my nextcloudpi backup everything was well. But the next reboot did nothing, i.e. no output on the HDMI Interface, nothing. So, I did a power-off and looked at the eMMC via a Micro-SD adapter I have. Of course, no logs, nothing. …
-
Hello, While for Odroid-N2 ubuntu standard image wakeonlan worked I miss for armbian 20.08.22 Focal simple advice for bootenv or kernel parameters to enable it e.g. enabled_wol as with ubuntu standard image for N2. ethtool eth0 tells just it is disabled (d) and network settings doesnot work either. regards, Dieter
-
Reputation Points
- 18 replies
- 9.5k views
- 3 followers
-
-
I'm using odroidc2 installed with Armbian 24.11.1 Noble Gnome to an eMMC card After the OS installation, power cycled and it went through the process of configuring the root password and initial user account. All was successful. However, once the system shows the greeter screen, the system is frozen. It does not respond to keystrokes nor mouse movement. The blue light on the odroidc2 continues to flash. I also used the USB/UART module to see the start up messages and to login. When the boot process is complete it prompts for user login but it does not accept any keystrokes. The serial port output is attached wtminicom.log
-
Reputation Points
- 0 replies
- 2.8k views
- 1 follower
-
-
Added more details for original post odroidc2 with Armbian 23.02 Jammy XFCE (Armbian_23.02.1_Odroidc2_jammy_current_6.1.14_xfce_desktop.img) I have an odroidc2 connected to: 1)monitor with built-in speakers via hdmi cable. 2)usb audio adapter (https://ameridroid.com/products/usb-audio-adapter) 3)ethernet cable 4)wireless keyboard dongle I have issue outputting audio to monitor speaker. dmesg and syslog output related to hdmi is as follows. Any help is greatly appreciated. Thanks $ dmesg|grep hdmi [ 0.035220] platform c883a000.hdmi-tx: Fixing up cyclic dependency with d0100000.vpu [ 0.037586] p…
-
Reputation Points
- 0 replies
- 2.5k views
- 1 follower
-
